/************************************************************************** * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * * * * Author: The ALICE Off-line Project. * * Contributors are mentioned in the code where appropriate. * * * * Permission to use, copy, modify and distribute this software and its * * documentation strictly for non-commercial purposes is hereby granted * * without fee, provided that the above copyright notice appears in all * * copies and that both the copyright notice and this permission notice * * appear in the supporting documentation. The authors make no claims * * about the suitability of this software for any purpose. It is * * provided "as is" without express or implied warranty. * **************************************************************************/ /* $Id$ */ #include #include #include #include #include #include #include #include #include //for kNuetron #include "AliConst.h" #include "AliMagF.h" #include "AliPDG.h" #include "AliRICHGeometry.h" #include "AliRICHHit.h" #include "AliRICHResponseV0.h" #include "AliRICHSegmentationV1.h" #include "AliRICHv3.h" #include "AliRun.h" ClassImp(AliRICHv3) //______________________________________________________________ // Implementation of the RICH version 3 with azimuthal rotation AliRICHv3::AliRICHv3(const char *sName, const char *sTitle) :AliRICH(sName,sTitle) { // The named ctor currently creates a single copy of // AliRICHGeometry AliRICHSegmentationV1 AliRICHResponseV0 // and initialises the corresponding models of all 7 chambers with these stuctures. // Note: all chambers share the single copy of models. MUST be changed later (???). if(GetDebug())Info("named ctor","Start."); fCkovNumber=fFreonProd=0; AliRICHGeometry *pRICHGeometry =new AliRICHGeometry; // ??? to be moved to AlRICHChamber::named ctor AliRICHSegmentationV1 *pRICHSegmentation=new AliRICHSegmentationV1; // ??? to be moved to AlRICHChamber::named ctor AliRICHResponseV0 *pRICHResponse =new AliRICHResponseV0; // ??? to be moved to AlRICHChamber::named ctor fChambers = new TObjArray(kNCH); for (Int_t i=0; iAddAt(new AliRICHChamber,i); // ??? to be changed to named ctor of AliRICHChamber SetGeometryModel(i,pRICHGeometry); SetSegmentationModel(i,pRICHSegmentation); SetResponseModel(i,pRICHResponse); ((AliRICHChamber*)fChambers->At(i))->Init(i); // ??? to be removed } if(GetDebug())Info("named ctor","Stop."); }//AliRICHv3::ctor(const char *pcName, const char *pcTitle) AliRICHv3::~AliRICHv3() { // Dtor deletes RICH models. In future (???) AliRICHChamber will be responsible for that. if(GetDebug()) cout<\n"; delete GetChamber(0)->GetGeometryModel(); delete GetChamber(0)->GetResponseModel(); delete GetChamber(0)->GetSegmentationModel(); }//AliRICHv3::dtor() void AliRICHv3::CreateGeometry() { // Provides geometry structure for simulation (currently GEANT volumes tree) if(GetDebug()) cout<\n"; AliRICH *pRICH = (AliRICH *) gAlice->GetDetector("RICH"); AliRICHSegmentationV0* segmentation; AliRICHGeometry* geometry; AliRICHChamber* iChamber; iChamber = &(pRICH->Chamber(0)); segmentation=(AliRICHSegmentationV0*) iChamber->GetSegmentationModel(0); geometry=iChamber->GetGeometryModel(); Float_t distance; distance = geometry->GetFreonThickness()/2 + geometry->GetQuartzThickness() + geometry->GetGapThickness(); geometry->SetRadiatorToPads(distance); //Opaque quartz thickness Float_t oqua_thickness = .5; //CsI dimensions Float_t csi_width = segmentation->Npx()*segmentation->Dpx() + segmentation->DeadZone(); Float_t csi_length = segmentation->Npy()*segmentation->Dpy() + 2*segmentation->DeadZone(); Int_t *idtmed = fIdtmed->GetArray()-999; Int_t i; Float_t zs; Int_t idrotm[1099]; Float_t par[3]; // --- Define the RICH detector // External aluminium box par[0] = 68.8; par[1] = 13; //Original Settings par[2] = 70.86; gMC->Gsvolu("RICH", "BOX ", idtmed[1009], par, 3); // Air par[0] = 66.3; par[1] = 13; //Original Settings par[2] = 68.35; gMC->Gsvolu("SRIC", "BOX ", idtmed[1000], par, 3); // Air 2 (cutting the lower part of the box) par[0] = 1.25; par[1] = 3; //Original Settings par[2] = 70.86; gMC->Gsvolu("AIR2", "BOX ", idtmed[1000], par, 3); // Air 3 (cutting the lower part of the box) par[0] = 66.3; par[1] = 3; //Original Settings par[2] = 1.2505; gMC->Gsvolu("AIR3", "BOX ", idtmed[1000], par, 3); // Honeycomb par[0] = 66.3; par[1] = .188; //Original Settings par[2] = 68.35; gMC->Gsvolu("HONE", "BOX ", idtmed[1001], par, 3); // Aluminium sheet par[0] = 66.3; par[1] = .025; //Original Settings par[2] = 68.35; /*par[0] = 66.5; par[1] = .025; par[2] = 63.1;*/ gMC->Gsvolu("ALUM", "BOX ", idtmed[1009], par, 3); // Quartz par[0] = geometry->GetQuartzWidth()/2; par[1] = geometry->GetQuartzThickness()/2; par[2] = geometry->GetQuartzLength()/2; gMC->Gsvolu("QUAR", "BOX ", idtmed[1002], par, 3); // Spacers (cylinders) par[0] = 0.; par[1] = .5; par[2] = geometry->GetFreonThickness()/2; gMC->Gsvolu("SPAC", "TUBE", idtmed[1002], par, 3); // Feet (freon slabs supports) par[0] = .7; par[1] = .3; par[2] = 1.9; gMC->Gsvolu("FOOT", "BOX", idtmed[1009], par, 3); // Opaque quartz par[0] = geometry->GetQuartzWidth()/2; par[1] = .2; par[2] = geometry->GetQuartzLength()/2; gMC->Gsvolu("OQUA", "BOX ", idtmed[1007], par, 3); // Frame of opaque quartz par[0] = geometry->GetOuterFreonWidth()/2; par[1] = geometry->GetFreonThickness()/2; par[2] = geometry->GetOuterFreonLength()/2; gMC->Gsvolu("OQF1", "BOX ", idtmed[1007], par, 3); par[0] = geometry->GetInnerFreonWidth()/2; par[1] = geometry->GetFreonThickness()/2; par[2] = geometry->GetInnerFreonLength()/2; gMC->Gsvolu("OQF2", "BOX ", idtmed[1007], par, 3); // Freon par[0] = geometry->GetOuterFreonWidth()/2 - oqua_thickness; par[1] = geometry->GetFreonThickness()/2; par[2] = geometry->GetOuterFreonLength()/2 - 2*oqua_thickness; gMC->Gsvolu("FRE1", "BOX ", idtmed[1003], par, 3); par[0] = geometry->GetInnerFreonWidth()/2 - oqua_thickness; par[1] = geometry->GetFreonThickness()/2; par[2] = geometry->GetInnerFreonLength()/2 - 2*oqua_thickness; gMC->Gsvolu("FRE2", "BOX ", idtmed[1003], par, 3); // Methane par[0] = csi_width/2; par[1] = geometry->GetGapThickness()/2; par[2] = csi_length/2; gMC->Gsvolu("META", "BOX ", idtmed[1004], par, 3); // Methane gap par[0] = csi_width/2; par[1] = geometry->GetProximityGapThickness()/2; par[2] = csi_length/2; gMC->Gsvolu("GAP ", "BOX ", idtmed[1008], par, 3); // CsI photocathode par[0] = csi_width/2; par[1] = .25; par[2] = csi_length/2; gMC->Gsvolu("CSI ", "BOX ", idtmed[1005], par, 3); // Anode grid par[0] = 0.; par[1] = .001; par[2] = 20.; gMC->Gsvolu("GRID", "TUBE", idtmed[1006], par, 3); // Wire supports // Bar of metal par[0] = csi_width/2; par[1] = 1.05; par[2] = 1.05; gMC->Gsvolu("WSMe", "BOX ", idtmed[1009], par, 3); // Ceramic pick up (base) par[0] = csi_width/2; par[1] = .25; par[2] = 1.05; gMC->Gsvolu("WSG1", "BOX ", idtmed[1010], par, 3); // Ceramic pick up (head) par[0] = csi_width/2; par[1] = .1; par[2] = .1; gMC->Gsvolu("WSG2", "BOX ", idtmed[1010], par, 3); // Aluminium supports for methane and CsI // Short bar par[0] = csi_width/2; par[1] = geometry->GetGapThickness()/2 + .25; par[2] = (68.35 - csi_length/2)/2; gMC->Gsvolu("SMSH", "BOX", idtmed[1009], par, 3); // Long bar par[0] = (66.3 - csi_width/2)/2; par[1] = geometry->GetGapThickness()/2 + .25; par[2] = csi_length/2 + 68.35 - csi_length/2; gMC->Gsvolu("SMLG", "BOX", idtmed[1009], par, 3); // Aluminium supports for freon // Short bar par[0] = geometry->GetQuartzWidth()/2; par[1] = .3; par[2] = (68.35 - geometry->GetQuartzLength()/2)/2; gMC->Gsvolu("SFSH", "BOX", idtmed[1009], par, 3); // Long bar par[0] = (66.3 - geometry->GetQuartzWidth()/2)/2; par[1] = .3; par[2] = geometry->GetQuartzLength()/2 + 68.35 - geometry->GetQuartzLength()/2; gMC->Gsvolu("SFLG", "BOX", idtmed[1009], par, 3); // PCB backplane par[0] = csi_width/2; par[1] = .25; par[2] = csi_length/4 -.5025; gMC->Gsvolu("PCB ", "BOX", idtmed[1011], par, 3); // Backplane supports // Aluminium slab par[0] = 33.15; par[1] = 2; par[2] = 21.65; gMC->Gsvolu("BACK", "BOX", idtmed[1009], par, 3); // Big hole par[0] = 9.05; par[1] = 2; par[2] = 4.4625; gMC->Gsvolu("BKHL", "BOX", idtmed[1000], par, 3); // Small hole par[0] = 5.7; par[1] = 2; par[2] = 4.4625; gMC->Gsvolu("BKHS", "BOX", idtmed[1000], par, 3); // Place holes inside backplane support gMC->Gspos("BKHS", 1, "BACK", .8 + 5.7,0., .6 + 4.4625, 0, "ONLY"); gMC->Gspos("BKHS", 2, "BACK", -.8 - 5.7,0., .6 + 4.4625, 0, "ONLY"); gMC->Gspos("BKHS", 3, "BACK", .8 + 5.7,0., -.6 - 4.4625, 0, "ONLY"); gMC->Gspos("BKHS", 4, "BACK", -.8 - 5.7,0., -.6 - 4.4625, 0, "ONLY"); gMC->Gspos("BKHS", 5, "BACK", .8 + 5.7,0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY"); gMC->Gspos("BKHS", 6, "BACK", -.8 - 5.7,0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY"); gMC->Gspos("BKHS", 7, "BACK", .8 + 5.7,0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY"); gMC->Gspos("BKHS", 8, "BACK", -.8 - 5.7,0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY"); gMC->Gspos("BKHL", 1, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., .6 + 4.4625, 0, "ONLY"); gMC->Gspos("BKHL", 2, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., .6 + 4.4625, 0, "ONLY"); gMC->Gspos("BKHL", 3, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., -.6 - 4.4625, 0, "ONLY"); gMC->Gspos("BKHL", 4, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., -.6 - 4.4625, 0, "ONLY"); gMC->Gspos("BKHL", 5, "BACK", .8 + 11.4+ 1.6 + 9.05, 0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY"); gMC->Gspos("BKHL", 6, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., .6 + 8.925 + 1.2 + 4.4625, 0, "ONLY"); gMC->Gspos("BKHL", 7, "BACK", .8 + 11.4 + 1.6 + 9.05, 0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY"); gMC->Gspos("BKHL", 8, "BACK", -.8 - 11.4 - 1.6 - 9.05, 0., -.6 - 8.925 - 1.2 - 4.4625, 0, "ONLY"); // --- Places the detectors defined with GSVOLU // Place material inside RICH gMC->Gspos("SRIC", 1, "RICH", 0.,0., 0., 0, "ONLY"); gMC->Gspos("AIR2", 1, "RICH", 66.3 + 1.2505, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 0., 0, "ONLY"); gMC->Gspos("AIR2", 2, "RICH", -66.3 - 1.2505, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 0., 0, "ONLY"); gMC->Gspos("AIR3", 1, "RICH", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, -68.35 - 1.25, 0, "ONLY"); gMC->Gspos("AIR3", 2, "RICH", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.5 - 3.35, 68.35 + 1.25, 0, "ONLY"); gMC->Gspos("ALUM", 1, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .376 -.025, 0., 0, "ONLY"); gMC->Gspos("HONE", 1, "SRIC", 0., 1.276- geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .05 - .188, 0., 0, "ONLY"); gMC->Gspos("ALUM", 2, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .6 - .025, 0., 0, "ONLY"); gMC->Gspos("FOOT", 1, "SRIC", 64.95, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, 36.9, 0, "ONLY"); gMC->Gspos("FOOT", 2, "SRIC", 21.65, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3 , 36.9, 0, "ONLY"); gMC->Gspos("FOOT", 3, "SRIC", -21.65, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, 36.9, 0, "ONLY"); gMC->Gspos("FOOT", 4, "SRIC", -64.95, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, 36.9, 0, "ONLY"); gMC->Gspos("FOOT", 5, "SRIC", 64.95, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, -36.9, 0, "ONLY"); gMC->Gspos("FOOT", 6, "SRIC", 21.65, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, -36.9, 0, "ONLY"); gMC->Gspos("FOOT", 7, "SRIC", -21.65, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, -36.9, 0, "ONLY"); gMC->Gspos("FOOT", 8, "SRIC", -64.95, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .4 - .3, -36.9, 0, "ONLY"); gMC->Gspos("OQUA", 1, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()- .2, 0., 0, "ONLY"); // Supports placing // Methane supports gMC->Gspos("SMLG", 1, "SRIC", csi_width/2 + (66.3 - csi_width/2)/2, 1.276 + .25, 0., 0, "ONLY"); gMC->Gspos("SMLG", 2, "SRIC", - csi_width/2 - (66.3 - csi_width/2)/2, 1.276 + .25, 0., 0, "ONLY"); gMC->Gspos("SMSH", 1, "SRIC", 0., 1.276 + .25, csi_length/2 + (68.35 - csi_length/2)/2, 0, "ONLY"); gMC->Gspos("SMSH", 2, "SRIC", 0., 1.276 + .25, - csi_length/2 - (68.35 - csi_length/2)/2, 0, "ONLY"); //Freon supports Float_t supp_y = 1.276 - geometry->GetGapThickness()/2- geometry->GetQuartzThickness() -geometry->GetFreonThickness() - .2 + .3; //y position of freon supports gMC->Gspos("SFLG", 1, "SRIC", geometry->GetQuartzWidth()/2 + (66.3 - geometry->GetQuartzWidth()/2)/2, supp_y, 0., 0, "ONLY"); gMC->Gspos("SFLG", 2, "SRIC", - geometry->GetQuartzWidth()/2 - (66.3 - geometry->GetQuartzWidth()/2)/2, supp_y, 0., 0, "ONLY"); gMC->Gspos("SFSH", 1, "SRIC", 0., supp_y, geometry->GetQuartzLength()/2 + (68.35 - geometry->GetQuartzLength()/2)/2, 0, "ONLY"); gMC->Gspos("SFSH", 2, "SRIC", 0., supp_y, - geometry->GetQuartzLength()/2 - (68.35 - geometry->GetQuartzLength()/2)/2, 0, "ONLY"); AliMatrix(idrotm[1019], 0., 0., 90., 0., 90., 90.); Int_t nspacers = 30; for (i = 0; i < nspacers/3; i++) { zs = -11.6/2 + (TMath::Abs(nspacers/6) - i) * 12.2; gMC->Gspos("SPAC", i, "FRE1", 10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings } for (i = nspacers/3; i < (nspacers*2)/3; i++) { zs = -11.6/2 + (nspacers/3 + TMath::Abs(nspacers/6) - i) * 12.2; gMC->Gspos("SPAC", i, "FRE1", 0, 0., zs, idrotm[1019], "ONLY"); //Original settings } for (i = (nspacers*2)/3; i < nspacers; ++i) { zs = -11.6/2 + ((nspacers*2)/3 + TMath::Abs(nspacers/6) - i) * 12.2; gMC->Gspos("SPAC", i, "FRE1", -10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings } for (i = 0; i < nspacers/3; i++) { zs = -11.6/2 + (TMath::Abs(nspacers/6) - i) * 12.2; gMC->Gspos("SPAC", i, "FRE2", 10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings } for (i = nspacers/3; i < (nspacers*2)/3; i++) { zs = -11.6/2 + (nspacers/3 + TMath::Abs(nspacers/6) - i) * 12.2; gMC->Gspos("SPAC", i, "FRE2", 0, 0., zs, idrotm[1019], "ONLY"); //Original settings } for (i = (nspacers*2)/3; i < nspacers; ++i) { zs = -11.6/2 + ((nspacers*2)/3 + TMath::Abs(nspacers/6) - i) * 12.2; gMC->Gspos("SPAC", i, "FRE2", -10.5, 0., zs, idrotm[1019], "ONLY"); //Original settings } gMC->Gspos("FRE1", 1, "OQF1", 0., 0., 0., 0, "ONLY"); gMC->Gspos("FRE2", 1, "OQF2", 0., 0., 0., 0, "ONLY"); gMC->Gspos("OQF1", 1, "SRIC", geometry->GetOuterFreonWidth()/2 + geometry->GetInnerFreonWidth()/2 + 2, 1.276 - geometry->GetGapThickness()/2- geometry->GetQuartzThickness() -geometry->GetFreonThickness()/2, 0., 0, "ONLY"); //Original settings (31.3) gMC->Gspos("OQF2", 2, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()/2, 0., 0, "ONLY"); //Original settings gMC->Gspos("OQF1", 3, "SRIC", - (geometry->GetOuterFreonWidth()/2 + geometry->GetInnerFreonWidth()/2) - 2, 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness() - geometry->GetFreonThickness()/2, 0., 0, "ONLY"); //Original settings (-31.3) gMC->Gspos("QUAR", 1, "SRIC", 0., 1.276 - geometry->GetGapThickness()/2 - geometry->GetQuartzThickness()/2, 0., 0, "ONLY"); gMC->Gspos("GAP ", 1, "META", 0., geometry->GetGapThickness()/2 - geometry->GetProximityGapThickness()/2 - 0.0001, 0., 0, "ONLY"); gMC->Gspos("META", 1, "SRIC", 0., 1.276, 0., 0, "ONLY"); gMC->Gspos("CSI ", 1, "SRIC", 0., 1.276 + geometry->GetGapThickness()/2 + .25, 0., 0, "ONLY"); printf("CSI pos: %f\n",1.276 + geometry->GetGapThickness()/2 + .25); // Wire support placing gMC->Gspos("WSG2", 1, "GAP ", 0., geometry->GetProximityGapThickness()/2 - .1, 0., 0, "ONLY"); gMC->Gspos("WSG1", 1, "CSI ", 0., 0., 0., 0, "ONLY"); gMC->Gspos("WSMe", 1, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, 0., 0, "ONLY"); // Backplane placing gMC->Gspos("BACK", 1, "SRIC ", -33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, 43.3, 0, "ONLY"); gMC->Gspos("BACK", 2, "SRIC ", 33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2 , 43.3, 0, "ONLY"); gMC->Gspos("BACK", 3, "SRIC ", -33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, 0., 0, "ONLY"); gMC->Gspos("BACK", 4, "SRIC ", 33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, 0., 0, "ONLY"); gMC->Gspos("BACK", 5, "SRIC ", 33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, -43.3, 0, "ONLY"); gMC->Gspos("BACK", 6, "SRIC ", -33.15, 1.276 + geometry->GetGapThickness()/2 + .5 + 2.1 + 2, -43.3, 0, "ONLY"); // PCB placing gMC->Gspos("PCB ", 1, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, csi_width/4 + .5025 + 2.5, 0, "ONLY"); gMC->Gspos("PCB ", 2, "SRIC ", 0., 1.276 + geometry->GetGapThickness()/2 + .5 + 1.05, -csi_width/4 - .5025 - 2.5, 0, "ONLY"); // Place chambers into mother volume ALIC Double_t dOffset = geometry->GetOffset() - geometry->GetGapThickness()/2; // distance from center of mother volume ALIC to methane Double_t dAlpha = geometry->GetAlphaAngle(); // angle between centers of chambers - y-z plane Double_t dAlphaRad = dAlpha*kDegrad; Double_t dBeta = geometry->GetBetaAngle(); // angle between center of chambers - y-x plane Double_t dBetaRad = dBeta*kDegrad; Double_t dRotAngle = geometry->GetRotationAngle(); // the whole RICH is to be rotated in x-y plane + means clockwise rotation Double_t dRotAngleRad = dRotAngle*kDegrad; TRotMatrix *pRotMatrix; // tmp pointer TVector3 vector(0,dOffset,0); // Position of chamber 2 without rotation // Chamber 0 standalone (no other chambers in this row) pRotMatrix = new TRotMatrix("rot993","rot993", 0., 0., 0.,0.,0.,0.); const Double_t* r = pRotMatrix->SetAngles(90., 0., 90.-dAlpha , 90., dAlpha, -90.); Double_t* rr = RotateXY(r, -dRotAngleRad); AliMatrix(idrotm[1000], rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); pRotMatrix->SetAngles(rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); vector.SetXYZ(0,dOffset,0); vector.RotateX(dAlphaRad); vector.RotateZ(-dRotAngleRad); gMC->Gspos("RICH",1,"ALIC",vector.X(),vector.Y(),vector.Z(),idrotm[1000], "ONLY"); Chamber(0).SetChamberTransform(vector.X(),vector.Y(),vector.Z(),pRotMatrix); if(GetDebug()) Info("CreateGeometry 0","%8.3f %8.3f %8.3f %8.3f %8.3f %8.3f",rr[0],rr[1],rr[2],rr[3],rr[4],rr[5]); if(GetDebug()) Info("CreateGeometry 0","x=%8.3f y=%8.3f z=%8.3f",vector.X(),vector.Y(),vector.Z()); // Chamber 1 pRotMatrix = new TRotMatrix("rot994","rot994", 0., 0., 0.,0.,0.,0.); r = pRotMatrix->SetAngles(90., -dBeta, 90., 90.-dBeta, 0., 0.); rr = RotateXY(r, -dRotAngleRad); AliMatrix(idrotm[1001], rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); pRotMatrix->SetAngles(rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); vector.SetXYZ(0,dOffset,0); vector.RotateZ(-dBetaRad); vector.RotateZ(-dRotAngleRad); gMC->Gspos("RICH",2,"ALIC",vector.X(),vector.Y(),vector.Z(),idrotm[1001], "ONLY"); Chamber(1).SetChamberTransform(vector.X(),vector.Y(),vector.Z(),pRotMatrix); if(GetDebug()) Info("CreateGeometry 1","%8.3f %8.3f %8.3f %8.3f %8.3f %8.3f",rr[0],rr[1],rr[2],rr[3],rr[4],rr[5]); if(GetDebug()) Info("CreateGeometry 1","x=%8.3f y=%8.3f z=%8.3f",vector.X(),vector.Y(),vector.Z()); // Chamber 2 the top one with no Alpha-Beta rotation pRotMatrix = new TRotMatrix("rot995","rot995", 0., 0., 0.,0.,0.,0.); r = pRotMatrix->SetAngles(90., 0., 90., 90., 0., 0.); rr = RotateXY(r, -dRotAngleRad); AliMatrix(idrotm[1002], rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); pRotMatrix->SetAngles(rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); vector.SetXYZ(0,dOffset,0); vector.RotateZ(-dRotAngleRad); gMC->Gspos("RICH",3,"ALIC",vector.X(),vector.Y(),vector.Z(),idrotm[1002], "ONLY"); Chamber(2).SetChamberTransform(vector.X(),vector.Y(),vector.Z(),pRotMatrix); if(GetDebug()) Info("CreateGeometry 2","%8.3f %8.3f %8.3f %8.3f %8.3f %8.3f",rr[0],rr[1],rr[2],rr[3],rr[4],rr[5]); if(GetDebug()) Info("CreateGeometry 2","x=%8.3f y=%8.3f z=%8.3f",vector.X(),vector.Y(),vector.Z()); // Chamber 3 pRotMatrix = new TRotMatrix("rot996","rot996", 0., 0., 0.,0.,0.,0.); r = pRotMatrix->SetAngles(90., dBeta, 90., 90.+dBeta, 0., 0.); rr = RotateXY(r, -dRotAngleRad); AliMatrix(idrotm[1003], rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); pRotMatrix->SetAngles(rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); vector.SetXYZ(0,dOffset,0); vector.RotateZ(dBetaRad); vector.RotateZ(-dRotAngleRad); gMC->Gspos("RICH",4,"ALIC",vector.X(),vector.Y(),vector.Z(),idrotm[1003], "ONLY"); Chamber(3).SetChamberTransform(vector.X(),vector.Y(),vector.Z(),pRotMatrix); if(GetDebug()) Info("CreateGeometry 3","%8.3f %8.3f %8.3f %8.3f %8.3f %8.3f",rr[0],rr[1],rr[2],rr[3],rr[4],rr[5]); if(GetDebug()) Info("CreateGeometry 3","x=%8.3f y=%8.3f z=%8.3f",vector.X(),vector.Y(),vector.Z()); // Chamber 4 pRotMatrix = new TRotMatrix("rot997","rot997", 0., 0., 0.,0.,0.,0.); r = pRotMatrix->SetAngles(90., 360.-dBeta, 108.2, 90.-dBeta, 18.2, 90.-dBeta); rr = RotateXY(r, -dRotAngleRad); AliMatrix(idrotm[1004], rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); pRotMatrix->SetAngles(rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); vector.SetXYZ(0,dOffset,0); vector.RotateZ(-dBetaRad); vector.RotateX(-dAlphaRad); vector.RotateZ(-dRotAngleRad); gMC->Gspos("RICH",5,"ALIC",vector.X(),vector.Y(),vector.Z(),idrotm[1004], "ONLY"); Chamber(4).SetChamberTransform(vector.X(),vector.Y(),vector.Z(),pRotMatrix); if(GetDebug()) Info("CreateGeometry 4","%8.3f %8.3f %8.3f %8.3f %8.3f %8.3f",rr[0],rr[1],rr[2],rr[3],rr[4],rr[5]); if(GetDebug()) Info("CreateGeometry 4","x=%8.3f y=%8.3f z=%8.3f",vector.X(),vector.Y(),vector.Z()); // Chamber 5 pRotMatrix = new TRotMatrix("rot998","rot998", 0., 0., 0.,0.,0.,0.); r = pRotMatrix->SetAngles(90., 0., 90.+dAlpha, 90., dAlpha, 90.); rr = RotateXY(r, -dRotAngleRad); AliMatrix(idrotm[1005], rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); pRotMatrix->SetAngles(rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); vector.SetXYZ(0,dOffset,0); vector.RotateX(-dAlphaRad); vector.RotateZ(-dRotAngleRad); gMC->Gspos("RICH",6,"ALIC",vector.X(),vector.Y(),vector.Z(),idrotm[1005], "ONLY"); Chamber(5).SetChamberTransform(vector.X(),vector.Y(),vector.Z(),pRotMatrix); if(GetDebug()) Info("CreateGeometry 5","%8.3f %8.3f %8.3f %8.3f %8.3f %8.3f",rr[0],rr[1],rr[2],rr[3],rr[4],rr[5]); if(GetDebug()) Info("CreateGeometry 5","x=%8.3f y=%8.3f z=%8.3f",vector.X(),vector.Y(),vector.Z()); // Chamber 6 pRotMatrix = new TRotMatrix("rot999","rot999", 0., 0., 0.,0.,0.,0.); r = pRotMatrix->SetAngles(90., dBeta, 108.2, 90.+dBeta, 18.2, 90.+dBeta); rr = RotateXY(r, -dRotAngleRad); AliMatrix(idrotm[1006], rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); pRotMatrix->SetAngles(rr[0], rr[1], rr[2], rr[3], rr[4], rr[5]); vector.SetXYZ(0,dOffset,0); vector.RotateZ(dBetaRad); vector.RotateX(-dAlphaRad); vector.RotateZ(-dRotAngleRad); gMC->Gspos("RICH",7,"ALIC",vector.X(),vector.Y(),vector.Z(),idrotm[1006], "ONLY"); Chamber(6).SetChamberTransform(vector.X(),vector.Y(),vector.Z(),pRotMatrix); if(GetDebug()) Info("CreateGeometry 6","%8.3f %8.3f %8.3f %8.3f %8.3f %8.3f",rr[0],rr[1],rr[2],rr[3],rr[4],rr[5]); if(GetDebug()) Info("CreateGeometry 6","x=%8.3f y=%8.3f z=%8.3f",vector.X(),vector.Y(),vector.Z()); }//void AliRICHv3::CreateGeometry() //______________________________________________________________________________ void AliRICHv3::Init() {//Makes nothing for a while if(GetDebug())Info("Init","Start."); if(GetDebug())Info("Init","Stop."); } //______________________________________________________________________________ void AliRICHv3::BuildGeometry() {//Provides geometry structure for event display (ROOT TNode tree) if(GetDebug())Info("BuildGeometry","Start."); TNode *node, *subnode, *top; const int kColorRICH = kRed; // top=gAlice->GetGeometry()->GetNode("alice"); AliRICH *pRICH = (AliRICH *) gAlice->GetDetector("RICH"); AliRICHChamber* iChamber; AliRICHGeometry* geometry; iChamber = &(pRICH->Chamber(0)); AliRICHSegmentationV1* segmentation=(AliRICHSegmentationV1*) iChamber->GetSegmentationModel(0); geometry=iChamber->GetGeometryModel(); new TBRIK("S_RICH","S_RICH","void",71.09999,11.5,73.15); Float_t padplane_width = segmentation->GetPadPlaneWidth(); Float_t padplane_length = segmentation->GetPadPlaneLength(); new TBRIK("PHOTO","PHOTO","void", padplane_width/2,.1,padplane_length/2); // Chamber 0 top->cd(); node = new TNode("RICH1","RICH1","S_RICH",Chamber(0).GetX(),Chamber(0).GetY(),Chamber(0).GetZ(),"rot993"); node->SetLineColor(kColorRICH); node->cd(); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); fNodes->Add(node); // Chamber 1 top->cd(); node = new TNode("RICH2","RICH2","S_RICH",Chamber(1).GetX(),Chamber(1).GetY(),Chamber(1).GetZ(),"rot994"); node->SetLineColor(kColorRICH); node->cd(); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); fNodes->Add(node); // Chamber 2 top->cd(); node = new TNode("RICH3","RICH3","S_RICH",Chamber(2).GetX(),Chamber(2).GetY(),Chamber(2).GetZ(),"rot995"); node->SetLineColor(kColorRICH); node->cd(); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); fNodes->Add(node); // Chamber 3 top->cd(); node = new TNode("RICH4","RICH4","S_RICH",Chamber(3).GetX(),Chamber(3).GetY(),Chamber(3).GetZ(),"rot996"); node->SetLineColor(kColorRICH); node->cd(); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); fNodes->Add(node); // Chamber 4 top->cd(); node = new TNode("RICH5","RICH5","S_RICH",Chamber(4).GetX(),Chamber(4).GetY(),Chamber(4).GetZ(),"rot997"); node->SetLineColor(kColorRICH); node->cd(); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); fNodes->Add(node); // Chamber 5 top->cd(); node = new TNode("RICH6","RICH6","S_RICH",Chamber(5).GetX(),Chamber(5).GetY(),Chamber(5).GetZ(),"rot998"); node->SetLineColor(kColorRICH); fNodes->Add(node);node->cd(); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); // Chamber 6 top->cd(); node = new TNode("RICH7","RICH7","S_RICH",Chamber(6).GetX(),Chamber(6).GetY(),Chamber(6).GetZ(),"rot999"); node->SetLineColor(kColorRICH); node->cd(); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,padplane_length/2 + segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",padplane_width + segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",0,5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); subnode = new TNode("PHOTO1","PHOTO1","PHOTO",-padplane_width - segmentation->DeadZone(),5,-padplane_length/2 - segmentation->DeadZone()/2,""); subnode->SetLineColor(kGreen); fNodes->Add(subnode); fNodes->Add(node); if(GetDebug())Info("BuildGeometry","Stop."); }//AliRICHv3::BuildGeometry() //______________________________________________________________________________ Double_t* AliRICHv3::RotateXY(const Double_t* r, Double_t a) { // Rotatation in xy-plane // by angle a // The resulting rotation matrix is given back in the G3 notation. Double_t* rr = new Double_t[6]; Double_t m[9]; Int_t i,j,k; for (i = 0; i < 3; i++) { j = 3*i; m[j] = r[j] * TMath::Cos(a) - r[j+1] * TMath::Sin(a); m[j+1] = r[j] * TMath::Sin(a) + r[j+1] * TMath::Cos(a); m[j+2] = r[j+2]; } for (i = 0; i < 3; i++) { j = 3*i; k = 2*i; rr[k] = TMath::ACos(m[j+2]) * kRaddeg; rr[k+1] = TMath::ATan2(m[j+1], m[j]) * kRaddeg; } return rr; }//Double_t* AliRICHv3::RotateXY(const Double_t* r, Double_t a) //______________________________________________________________________________ void AliRICHv3::StepManager() {//Full Step Manager Int_t copy, id; static Int_t idvol; static Int_t vol[2]; Int_t ipart; static Float_t hits[22]; static Float_t ckovData[19]; TLorentzVector position; TLorentzVector momentum; Float_t pos[3]; Float_t mom[4]; Float_t localPos[3]; Float_t localMom[4]; Float_t localTheta,localPhi; Float_t theta,phi; Float_t destep, step; Double_t ranf[2]; Int_t nPads; Float_t coscerenkov; static Float_t eloss, xhit, yhit, tlength; const Float_t kBig=1.e10; TClonesArray &lhits = *fHits; TParticle *current = (TParticle*)(*gAlice->Particles())[gAlice->GetCurrentTrackNumber()]; //if (current->Energy()>1) //{ // Only gas gap inside chamber // Tag chambers and record hits when track enters id=gMC->CurrentVolID(copy); idvol = copy-1; Float_t cherenkovLoss=0; //gAlice->KeepTrack(gAlice->GetCurrentTrackNumber()); gMC->TrackPosition(position); pos[0]=position(0); pos[1]=position(1); pos[2]=position(2); //bzero((char *)ckovData,sizeof(ckovData)*19); ckovData[1] = pos[0]; // X-position for hit ckovData[2] = pos[1]; // Y-position for hit ckovData[3] = pos[2]; // Z-position for hit ckovData[6] = 0; // dummy track length //ckovData[11] = gAlice->GetCurrentTrackNumber(); //printf("\n+++++++++++\nTrack: %d\n++++++++++++\n",gAlice->GetCurrentTrackNumber()); //AliRICH *RICH = (AliRICH *) gAlice->GetDetector("RICH"); /********************Store production parameters for Cerenkov photons************************/ //is it a Cerenkov photon? if (gMC->TrackPid() == 50000050) { //if (gMC->VolId("GAP ")==gMC->CurrentVolID(copy)) //{ Float_t ckovEnergy = current->Energy(); //energy interval for tracking if (ckovEnergy > 5.6e-09 && ckovEnergy < 7.8e-09 ) //if (ckovEnergy > 0) { if (gMC->IsTrackEntering()){ //is track entering? //printf("Track entered (1)\n"); if (gMC->VolId("FRE1")==gMC->CurrentVolID(copy) || gMC->VolId("FRE2")==gMC->CurrentVolID(copy)) { //is it in freo? if (gMC->IsNewTrack()){ //is it the first step? //printf("I'm in!\n"); Int_t mother = current->GetFirstMother(); //printf("Second Mother:%d\n",current->GetSecondMother()); ckovData[10] = mother; ckovData[11] = gAlice->GetCurrentTrackNumber(); ckovData[12] = 1; //Media where photon was produced 1->Freon, 2->Quarz //printf("Produced in FREO\n"); fCkovNumber++; fFreonProd=1; //printf("Index: %d\n",fCkovNumber); } //first step question } //freo question if (gMC->IsNewTrack()){ //is it first step? if (gMC->VolId("QUAR")==gMC->CurrentVolID(copy)) //is it in quarz? { ckovData[12] = 2; //printf("Produced in QUAR\n"); } //quarz question } //first step question //printf("Before %d\n",fFreonProd); } //track entering question if (ckovData[12] == 1) //was it produced in Freon? //if (fFreonProd == 1) { if (gMC->IsTrackEntering()){ //is track entering? //printf("Track entered (2)\n"); //printf("Current volume (should be META): %s\n",gMC->CurrentVolName()); //printf("VolId: %d, CurrentVolID: %d\n",gMC->VolId("META"),gMC->CurrentVolID(copy)); if (gMC->VolId("META")==gMC->CurrentVolID(copy)) //is it in gap? { //printf("Got in META\n"); gMC->TrackMomentum(momentum); mom[0]=momentum(0); mom[1]=momentum(1); mom[2]=momentum(2); mom[3]=momentum(3); gMC->Gmtod(mom,localMom,2); Float_t cophi = TMath::Cos(TMath::ATan2(localMom[0], localMom[1])); Float_t t = (1. - .025 / cophi) * (1. - .05 / cophi); /**************** Photons lost in second grid have to be calculated by hand************/ gMC->GetRandom()->RndmArray(1,ranf); if (ranf[0] > t) { gMC->StopTrack(); ckovData[13] = 5; AddCerenkov(gAlice->GetCurrentTrackNumber(),vol,ckovData); //printf("Added One (1)!\n"); //printf("Lost one in grid\n"); } /**********************************************************************************/ } //gap //printf("Current volume (should be CSI) (1): %s\n",gMC->CurrentVolName()); //printf("VolId: %d, CurrentVolID: %d\n",gMC->VolId("CSI "),gMC->CurrentVolID(copy)); if (gMC->VolId("CSI ")==gMC->CurrentVolID(copy)) //is it in csi? { //printf("Got in CSI\n"); gMC->TrackMomentum(momentum); mom[0]=momentum(0); mom[1]=momentum(1); mom[2]=momentum(2); mom[3]=momentum(3); gMC->Gmtod(mom,localMom,2); /********* Photons lost by Fresnel reflection have to be calculated by hand********/ /***********************Cerenkov phtons (always polarised)*************************/ Double_t localTc = localMom[0]*localMom[0]+localMom[2]*localMom[2]; Double_t localRt = TMath::Sqrt(localTc); localTheta = Float_t(TMath::ATan2(localRt,Double_t(localMom[1]))); Double_t cotheta = TMath::Abs(cos(localTheta)); Float_t t = Fresnel(ckovEnergy*1e9,cotheta,1); gMC->GetRandom()->RndmArray(1,ranf); if (ranf[0] < t) { gMC->StopTrack(); ckovData[13] = 6; AddCerenkov(gAlice->GetCurrentTrackNumber(),vol,ckovData); //printf("Added One (2)!\n"); //printf("Lost by Fresnel\n"); } /**********************************************************************************/ } } //track entering? /********************Evaluation of losses************************/ /******************still in the old fashion**********************/ TArrayI procs; Int_t i1 = gMC->StepProcesses(procs); //number of physics mechanisms acting on the particle for (Int_t i = 0; i < i1; ++i) { // Reflection loss if (procs[i] == kPLightReflection) { //was it reflected ckovData[13]=10; if (gMC->VolId("FRE1")==gMC->CurrentVolID(copy) || gMC->VolId("FRE2")==gMC->CurrentVolID(copy)) ckovData[13]=1; if (gMC->CurrentVolID(copy) == gMC->VolId("QUAR")) ckovData[13]=2; //gMC->StopTrack(); //AddCerenkov(gAlice->GetCurrentTrackNumber(),vol,ckovData); } //reflection question // Absorption loss else if (procs[i] == kPLightAbsorption) { //was it absorbed? //printf("Got in absorption\n"); ckovData[13]=20; if (gMC->VolId("FRE1")==gMC->CurrentVolID(copy) || gMC->VolId("FRE2")==gMC->CurrentVolID(copy)) ckovData[13]=11; if (gMC->CurrentVolID(copy) == gMC->VolId("QUAR")) ckovData[13]=12; if (gMC->CurrentVolID(copy) == gMC->VolId("META")) ckovData[13]=13; if (gMC->CurrentVolID(copy) == gMC->VolId("GAP ")) ckovData[13]=13; if (gMC->CurrentVolID(copy) == gMC->VolId("SRIC")) ckovData[13]=15; // CsI inefficiency if (gMC->CurrentVolID(copy) == gMC->VolId("CSI ")) { ckovData[13]=16; } gMC->StopTrack(); AddCerenkov(gAlice->GetCurrentTrackNumber(),vol,ckovData); //printf("Added One (3)!\n"); //printf("Added cerenkov %d\n",fCkovNumber); } //absorption question // Photon goes out of tracking scope else if (procs[i] == kPStop) { //is it below energy treshold? ckovData[13]=21; gMC->StopTrack(); AddCerenkov(gAlice->GetCurrentTrackNumber(),vol,ckovData); //printf("Added One (4)!\n"); } // energy treshold question } //number of mechanisms cycle /**********************End of evaluation************************/ } //freon production question } //energy interval question //}//inside the proximity gap question } //cerenkov photon question /**************************************End of Production Parameters Storing*********************/ /*******************************Treat photons that hit the CsI (Ckovs and Feedbacks)************/ if (gMC->TrackPid() == 50000050 || gMC->TrackPid() == 50000051) { //printf("Cerenkov\n"); //if (gMC->TrackPid() == 50000051) //printf("Tracking a feedback\n"); if (gMC->VolId("CSI ")==gMC->CurrentVolID(copy)) { //printf("Current volume (should be CSI) (2): %s\n",gMC->CurrentVolName()); //printf("VolId: %d, CurrentVolID: %d\n",gMC->VolId("CSI "),gMC->CurrentVolID(copy)); //printf("Got in CSI\n"); //printf("Tracking a %d\n",gMC->TrackPid()); if (gMC->Edep() > 0.){ gMC->TrackPosition(position); gMC->TrackMomentum(momentum); pos[0]=position(0); pos[1]=position(1); pos[2]=position(2); mom[0]=momentum(0); mom[1]=momentum(1); mom[2]=momentum(2); mom[3]=momentum(3); Double_t tc = mom[0]*mom[0]+mom[1]*mom[1]; Double_t rt = TMath::Sqrt(tc); theta = Float_t(TMath::ATan2(rt,Double_t(mom[2])))*kRaddeg; phi = Float_t(TMath::ATan2(Double_t(mom[1]),Double_t(mom[0])))*kRaddeg; gMC->CurrentVolOffID(2,copy); vol[0]=copy; idvol=vol[0]-1; gMC->Gmtod(pos,localPos,1); //Chamber(idvol).GlobaltoLocal(pos,localPos); gMC->Gmtod(mom,localMom,2); //Chamber(idvol).GlobaltoLocal(mom,localMom); gMC->CurrentVolOffID(2,copy); vol[0]=copy; idvol=vol[0]-1; //Int_t sector=((AliRICHChamber*) (*fChambers)[idvol]) //->Sector(localPos[0], localPos[2]); //printf("Sector:%d\n",sector); /*if (gMC->TrackPid() == 50000051){ fFeedbacks++; printf("Feedbacks:%d\n",fFeedbacks); }*/ //PH ((AliRICHChamber*) (*fChambers)[idvol]) ((AliRICHChamber*)fChambers->At(idvol)) ->SigGenInit(localPos[0], localPos[2], localPos[1]); if(idvolTrackPid(); // particle type ckovData[1] = pos[0]; // X-position for hit ckovData[2] = pos[1]; // Y-position for hit ckovData[3] = pos[2]; // Z-position for hit ckovData[4] = theta; // theta angle of incidence ckovData[5] = phi; // phi angle of incidence ckovData[8] = (Float_t) fNSDigits; // first sdigit ckovData[9] = -1; // last pad hit ckovData[13] = 4; // photon was detected ckovData[14] = mom[0]; ckovData[15] = mom[1]; ckovData[16] = mom[2]; destep = gMC->Edep(); gMC->SetMaxStep(kBig); cherenkovLoss += destep; ckovData[7]=cherenkovLoss; //nPads = Hits2SDigits(localPos[0],localPos[2],cherenkovLoss,idvol,kCerenkov);//for photons in CsI kir if (fNSDigits > (Int_t)ckovData[8]) { ckovData[8]= ckovData[8]+1; ckovData[9]= (Float_t) fNSDigits; } //printf("Cerenkov loss: %f\n", cherenkovLoss); ckovData[17] = nPads; //printf("nPads:%d",nPads); //TClonesArray *Hits = RICH->Hits(); AliRICHHit *mipHit = (AliRICHHit*) (fHits->UncheckedAt(0)); if (mipHit) { mom[0] = current->Px(); mom[1] = current->Py(); mom[2] = current->Pz(); Float_t mipPx = mipHit->MomX(); Float_t mipPy = mipHit->MomY(); Float_t mipPz = mipHit->MomZ(); Float_t r = mom[0]*mom[0] + mom[1]*mom[1] + mom[2]*mom[2]; Float_t rt = TMath::Sqrt(r); Float_t mipR = mipPx*mipPx + mipPy*mipPy + mipPz*mipPz; Float_t mipRt = TMath::Sqrt(mipR); if ((rt*mipRt) > 0) { coscerenkov = (mom[0]*mipPx + mom[1]*mipPy + mom[2]*mipPz)/(rt*mipRt); } else { coscerenkov = 0; } Float_t cherenkov = TMath::ACos(coscerenkov); ckovData[18]=cherenkov; } //if (sector != -1) //{ AddHit(gAlice->GetCurrentTrackNumber(),vol,ckovData); AddCerenkov(gAlice->GetCurrentTrackNumber(),vol,ckovData); //printf("Added One (5)!\n"); //} } } } } /***********************************************End of photon hits*********************************************/ /**********************************************Charged particles treatment*************************************/ else if (gMC->TrackCharge()) //else if (1 == 1) { //If MIP /*if (gMC->IsTrackEntering()) { hits[13]=20;//is track entering? }*/ if (gMC->VolId("FRE1")==gMC->CurrentVolID(copy) || gMC->VolId("FRE2")==gMC->CurrentVolID(copy)) { gMC->TrackMomentum(momentum); mom[0]=momentum(0); mom[1]=momentum(1); mom[2]=momentum(2); mom[3]=momentum(3); hits [19] = mom[0]; hits [20] = mom[1]; hits [21] = mom[2]; fFreonProd=1; } if (gMC->VolId("GAP ")== gMC->CurrentVolID(copy)) { // Get current particle id (ipart), track position (pos) and momentum (mom) gMC->CurrentVolOffID(3,copy); vol[0]=copy; idvol=vol[0]-1; //Int_t sector=((AliRICHChamber*) (*fChambers)[idvol]) //->Sector(localPos[0], localPos[2]); //printf("Sector:%d\n",sector); gMC->TrackPosition(position); gMC->TrackMomentum(momentum); pos[0]=position(0); pos[1]=position(1); pos[2]=position(2); mom[0]=momentum(0); mom[1]=momentum(1); mom[2]=momentum(2); mom[3]=momentum(3); gMC->Gmtod(pos,localPos,1); //Chamber(idvol).GlobaltoLocal(pos,localPos); gMC->Gmtod(mom,localMom,2); //Chamber(idvol).GlobaltoLocal(mom,localMom); ipart = gMC->TrackPid(); // // momentum loss and steplength in last step destep = gMC->Edep(); step = gMC->TrackStep(); // // record hits when track enters ... if( gMC->IsTrackEntering()) { // gMC->SetMaxStep(fMaxStepGas); Double_t tc = mom[0]*mom[0]+mom[1]*mom[1]; Double_t rt = TMath::Sqrt(tc); theta = Float_t(TMath::ATan2(rt,Double_t(mom[2])))*kRaddeg; phi = Float_t(TMath::ATan2(Double_t(mom[1]),Double_t(mom[0])))*kRaddeg; Double_t localTc = localMom[0]*localMom[0]+localMom[2]*localMom[2]; Double_t localRt = TMath::Sqrt(localTc); localTheta = Float_t(TMath::ATan2(localRt,Double_t(localMom[1])))*kRaddeg; localPhi = Float_t(TMath::ATan2(Double_t(localMom[2]),Double_t(localMom[0])))*kRaddeg; hits[0] = Float_t(ipart); // particle type hits[1] = localPos[0]; // X-position for hit hits[2] = localPos[1]; // Y-position for hit hits[3] = localPos[2]; // Z-position for hit hits[4] = localTheta; // theta angle of incidence hits[5] = localPhi; // phi angle of incidence hits[8] = (Float_t) fNSDigits; // first sdigit hits[9] = -1; // last pad hit hits[13] = fFreonProd; // did id hit the freon? hits[14] = mom[0]; hits[15] = mom[1]; hits[16] = mom[2]; hits[18] = 0; // dummy cerenkov angle tlength = 0; eloss = 0; fFreonProd = 0; Chamber(idvol).LocaltoGlobal(localPos,hits+1); //To make chamber coordinates x-y had to pass localPos[0], localPos[2] xhit = localPos[0]; yhit = localPos[2]; // Only if not trigger chamber if(idvolAt(idvol)) ->SigGenInit(localPos[0], localPos[2], localPos[1]); } } // // Calculate the charge induced on a pad (disintegration) in case // // Mip left chamber ... if( gMC->IsTrackExiting() || gMC->IsTrackStop() || gMC->IsTrackDisappeared()){ gMC->SetMaxStep(kBig); eloss += destep; tlength += step; // Only if not trigger chamber if(idvol 0) { if(gMC->TrackPid() == kNeutron) printf("\n\n\n\n\n Neutron Making Pad Hit!!! \n\n\n\n"); //nPads = Hits2SDigits(xhit,yhit,eloss,idvol,kMip); //for MIP kir hits[17] = nPads; //printf("nPads:%d",nPads); } } hits[6]=tlength; hits[7]=eloss; if (fNSDigits > (Int_t)hits[8]) { hits[8]= hits[8]+1; hits[9]= (Float_t) fNSDigits; } //if(sector !=-1) new(lhits[fNhits++]) AliRICHHit(fIshunt,gAlice->GetCurrentTrackNumber(),vol,hits); eloss = 0; // // Check additional signal generation conditions // defined by the segmentation // model (boundary crossing conditions) } else if //PH (((AliRICHChamber*) (*fChambers)[idvol]) (((AliRICHChamber*)fChambers->At(idvol)) ->SigGenCond(localPos[0], localPos[2], localPos[1])) { //PH ((AliRICHChamber*) (*fChambers)[idvol]) ((AliRICHChamber*)fChambers->At(idvol)) ->SigGenInit(localPos[0], localPos[2], localPos[1]); if (eloss > 0) { if(gMC->TrackPid() == kNeutron) printf("\n\n\n\n\n Neutron Making Pad Hit!!! \n\n\n\n"); //nPads = Hits2SDigits(xhit,yhit,eloss,idvol,kMip);//for N kir hits[17] = nPads; //printf("Npads:%d",NPads); } xhit = localPos[0]; yhit = localPos[2]; eloss = destep; tlength += step ; // // nothing special happened, add up energy loss } else { eloss += destep; tlength += step ; } } } /*************************************************End of MIP treatment**************************************/ }//void AliRICHv3::StepManager()