X-Git-Url: http://git.uio.no/git/?a=blobdiff_plain;f=FMD%2FAliFMD.cxx;h=9f950a956cba442687465bfe4bc5e96e1eb5fe67;hb=2942f542d4b5bec82bbddfadd400306661f8dc8d;hp=c972a6dd61e0d341243b5c7653a23e7f92a05c62;hpb=b9a2d5e4f73209731b9e94852d4c1f2930a82ade;p=u%2Fmrichter%2FAliRoot.git
diff --git a/FMD/AliFMD.cxx b/FMD/AliFMD.cxx
index c972a6dd61e..9f950a956cb 100644
--- a/FMD/AliFMD.cxx
+++ b/FMD/AliFMD.cxx
@@ -12,312 +12,1097 @@
* about the suitability of this software for any purpose. It is *
* provided "as is" without express or implied warranty. *
**************************************************************************/
- //////////////////////////////////////////////////////////////////////////////
-// //
-// Forward Multiplicity Detector based on Silicon plates //
-// This class contains the base procedures for the Forward Multiplicity //
-// detector //
-// Detector consists of 6 Si volumes covered pseudorapidity interval //
-// from 1.6 to 6.0. //
-// //
-//Begin_Html
-/*
-
-
- The responsible person for this module is
-Alla Maevskaia.
-
-
-
+/* $Id$ */ +/** @file AliFMD.cxx + @author Christian Holm Christensen+ @date Sun Mar 26 17:59:18 2006 + @brief Implementation of AliFMD base class */ -//End_Html -// // -// // -/////////////////////////////////////////////////////////////////////////////// - -#define DEBUG -#include -#include -#include -#include -#include - -#include -#include -#include "AliFMDv1.h" -#include "AliRun.h" -#include "AliMC.h" -#include -#include -#include "AliMagF.h" -#include "AliFMDhit.h" -#include "AliFMDdigit.h" -#include +//____________________________________________________________________ +// +// Forward Multiplicity Detector based on Silicon wafers. This class +// is the driver for especially simulation. +// +// The Forward Multiplicity Detector consists of 3 sub-detectors FMD1, +// FMD2, and FMD3, each of which has 1 or 2 rings of silicon sensors. +// +// This is the base class for all FMD manager classes. +// +// The actual code is done by various separate classes. Below is +// diagram showing the relationship between the various FMD classes +// that handles the simulation +// +// +// +----------+ +----------+ +// | AliFMDv1 | | AliFMDv0 | +// +----------+ +----------+ +// | | +-----------------+ +// +----+--------------+ +--| AliFMDDigitizer | +// | | +-----------------+ +// | +---------------------+ | +// | +--| AliFMDBaseDigitizer |<--+ +// V 1 | +---------------------+ | +// +--------+<>--+ | +------------------+ +// | AliFMD | +--| AliFMDSDigitizer | +// +--------+<>--+ +------------------+ +// 1 | +---------------------+ +// +--| AliFMDReconstructor | +// +---------------------+ +// +// * AliFMD +// This defines the interface for the various parts of AliROOT that +// uses the FMD, like AliFMDSimulator, AliFMDDigitizer, +// AliFMDReconstructor, and so on. +// +// * AliFMDv0 +// This is a concrete implementation of the AliFMD interface. +// It is the responsibility of this class to create the FMD +// geometry. +// +// * AliFMDv1 +// This is a concrete implementation of the AliFMD interface. +// It is the responsibility of this class to create the FMD +// geometry, process hits in the FMD, and serve hits and digits to +// the various clients. +// +// * AliFMDSimulator +// This is the base class for the FMD simulation tasks. The +// simulator tasks are responsible to implment the geoemtry, and +// process hits. +// +// * AliFMDReconstructor +// This is a concrete implementation of the AliReconstructor that +// reconstructs pseudo-inclusive-multiplicities from digits (raw or +// from simulation) +// +// Calibration and geometry parameters are managed by separate +// singleton managers. These are AliFMDGeometry and +// AliFMDParameters. Please refer to these classes for more +// information on these. +// +// These files are not in the same directory, so there's no reason to +// ask the preprocessor to search in the current directory for these +// files by including them with `#include "..."' +#include // ROOT_TBrowser +#include // ROOT_TClonesArray +#include // ROOT_TGeoGlobalMagField +#include // ROOT_TGeoManager +#include // ROOT_TRotMatrix +#include // ROOT_TTree +#include // ROOT_TVector2 +#include // ROOT_TVirtualMC +#include // __CMATH__ +#include // ALIRUNDIGITIZER_H +#include // ALILOADER_H +#include // ALIRUN_H +#include // ALIMC_H +#include // ALIMAGF_H +// #include // ALILOG_H +#include "AliFMDDebug.h" // Better debug macros +#include "AliFMD.h" // ALIFMD_H +#include "AliFMDDigit.h" // ALIFMDDIGIT_H +#include "AliFMDSDigit.h" // ALIFMDSDIGIT_H +#include "AliFMDHit.h" // ALIFMDHIT_H +#include "AliFMDGeometry.h" // ALIFMDGEOMETRY_H +#include "AliFMDDetector.h" // ALIFMDDETECTOR_H +#include "AliFMDRing.h" // ALIFMDRING_H +#include "AliFMDDigitizer.h" // ALIFMDDIGITIZER_H +#include "AliFMDHitDigitizer.h" // ALIFMDSDIGITIZER_H +// #define USE_SSDIGITIZER +//#ifdef USE_SSDIGITIZER +//# include "AliFMDSSDigitizer.h" // ALIFMDSDIGITIZER_H +//#endif +// #include "AliFMDGeometryBuilder.h" +#include "AliFMDRawWriter.h" // ALIFMDRAWWRITER_H +#include "AliFMDRawReader.h" // ALIFMDRAWREADER_H +#include "AliTrackReference.h" +#include "AliFMDStripIndex.h" +#include "AliFMDEncodedEdx.h" +#include "AliFMDParameters.h" +#include "AliFMDReconstructor.h" + +//____________________________________________________________________ ClassImp(AliFMD) - - //_____________________________________________________________________________ - AliFMD::AliFMD(): AliDetector() +#if 0 + ; // This is to keep Emacs from indenting the next line +#endif + +//____________________________________________________________________ +AliFMD::AliFMD() + : AliDetector(), + fSDigits(0), + fNsdigits(0), + fDetailed(kTRUE), + fUseOld(kFALSE), + fUseAssembly(kTRUE), + fBad(0) { // // Default constructor for class AliFMD // - fIshunt = 0; + AliFMDDebug(10, ("\tDefault CTOR")); + fHits = 0; + fDigits = 0; + fIshunt = 0; + // fBad = new TClonesArray("AliFMDHit"); } - -//_____________________________________________________________________________ + +//____________________________________________________________________ AliFMD::AliFMD(const char *name, const char *title) - : AliDetector(name,title) + : AliDetector (name, title), + fSDigits(0), + fNsdigits(0), + fDetailed(kTRUE), + fUseOld(kFALSE), + fUseAssembly(kFALSE), + fBad(0) { // // Standard constructor for Forward Multiplicity Detector // - - // + AliFMDDebug(10, ("\tStandard CTOR")); + // fBad = new TClonesArray("AliFMDHit"); + // Initialise Hit array - fHits = new TClonesArray("AliFMDhit", 1000); - // Digits for each Si disk - fDigits = new TClonesArray("AliFMDdigit", 1000); - fSDigits = new TClonesArray("AliFMDdigit", 1000) ; - gAlice->AddHitList(fHits); + // HitsArray(); + // gAlice->GetMCApp()->AddHitList(fHits); - fIshunt = 0; - fIdSens1 = 0; - - SetMarkerColor(kRed); + // (S)Digits for the detectors disk + // DigitsArray(); + // SDigitsArray(); + + // CHC: What is this? + fIshunt = 0; + //PH SetMarkerColor(kRed); + //PH SetLineColor(kYellow); } - -AliFMD::~AliFMD() +//____________________________________________________________________ +AliFMD::~AliFMD () { + // Destructor for base class AliFMD if (fHits) { - fHits->Delete(); - delete fHits; + fHits->Delete(); + delete fHits; + fHits = 0; + } + if (fDigits) { + fDigits->Delete(); + delete fDigits; + fDigits = 0; + } + if (fSDigits) { + fSDigits->Delete(); + delete fSDigits; + fSDigits = 0; + } + if (fBad) { + fBad->Delete(); + delete fBad; + fBad = 0; } - delete fDigits ; - delete fSDigits ; - } -//_____________________________________________________________________________ -void AliFMD::AddHit(Int_t track, Int_t *vol, Float_t *hits) + + +//==================================================================== +// +// GEometry ANd Traking +// +//____________________________________________________________________ +void +AliFMD::CreateGeometry() { // - // Add a hit to the list + // Create the geometry of Forward Multiplicity Detector. The actual + // construction of the geometry is delegated to the class + // AliFMDGeometryBuilder, invoked by the singleton manager + // AliFMDGeometry. // - TClonesArray &lhits = *fHits; - new(lhits[fNhits++]) AliFMDhit(fIshunt,track,vol,hits); -} -//_____________________________________________________________________________ -void AliFMD::AddDigit( Int_t *digits) -{ - // add a real digit - as coming from data - - // printf("AddDigit\n"); - - TClonesArray &ldigits = *fDigits; - // new((*fDigits)[fNdigits++]) AliFMDdigit(digits); - new(ldigits[fNdigits++]) AliFMDdigit(digits); + AliFMDGeometry* fmd = AliFMDGeometry::Instance(); + fmd->SetDetailed(fDetailed); + fmd->UseAssembly(fUseAssembly); + fmd->Build(); +} -} -//_____________________________________________________________________________ -void AliFMD::BuildGeometry() +//____________________________________________________________________ +void AliFMD::CreateMaterials() { + // Define the materials and tracking mediums needed by the FMD + // simulation. These mediums are made by sending the messages + // AliMaterial, AliMixture, and AliMedium to the passed AliModule + // object module. The defined mediums are + // + // FMD Si$ Silicon (active medium in sensors) + // FMD C$ Carbon fibre (support cone for FMD3 and vacuum pipe) + // FMD Al$ Aluminium (honeycomb support plates) + // FMD PCB$ Printed Circuit Board (FEE board with VA1_3) + // FMD Chip$ Electronics chips (currently not used) + // FMD Air$ Air (Air in the FMD) + // FMD Plastic$ Plastic (Support legs for the hybrid cards) // - // Build simple ROOT TNode geometry for event display - // - TNode *node, *top; - const int kColorFMD = 7; + // The geometry builder should really be the one that creates the + // materials, but the architecture of AliROOT makes that design + // akward. What should happen, was that the AliFMDGeometryBuilder + // made the mediums, and that this class retrives pointers from the + // TGeoManager, and registers the mediums here. Alas, it's not + // really that easy. // - top=gAlice->GetGeometry()->GetNode("alice"); - - // FMD define the different volumes - new TRotMatrix("rot901","rot901", 90, 0, 90, 90, 180, 0); - - new TTUBE("S_FMD0","FMD volume 0","void",4.73,17.7,1.5); - top->cd(); - node = new TNode("FMD0","FMD0","S_FMD0",0,0,64,""); - node->SetLineColor(kColorFMD); - fNodes->Add(node); - - new TTUBE("S_FMD1","FMD volume 1","void",23.4,36.,1.5); - top->cd(); - node = new TNode("FMD1","FMD1","S_FMD1",0,0,85,""); - node->SetLineColor(kColorFMD); - fNodes->Add(node); + AliFMDDebug(10, ("\tCreating materials")); + // Get pointer to geometry singleton object. + AliFMDGeometry* geometry = AliFMDGeometry::Instance(); + geometry->Init(); +#if 0 + if (gGeoManager && gGeoManager->GetMedium("FMD Si$")) { + // We need to figure out the some stuff about the geometry + fmd->ExtractGeomInfo(); + return; + } +#endif + Int_t id; + Double_t a = 0; + Double_t z = 0; + Double_t density = 0; + Double_t radiationLength = 0; + Double_t absorbtionLength = 999; + Int_t fieldType = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ(); // Field type + Double_t maxField = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max(); // Field max. + Double_t maxBending = 0; // Max Angle + Double_t maxStepSize = 0.001; // Max step size + Double_t maxEnergyLoss = 1; // Max Delta E + Double_t precision = 0.001; // Precision + Double_t minStepSize = 0.001; // Minimum step size + + // Silicon + a = 28.0855; + z = 14.; + density = geometry->GetSiDensity(); + radiationLength = 9.36; + maxBending = 1; + maxStepSize = .001; + precision = .001; + minStepSize = .001; + id = kSiId; + AliMaterial(id, "Si$", a, z, density, radiationLength, absorbtionLength); + AliMedium(kSiId, "Si$", id,1,fieldType,maxField,maxBending, + maxStepSize,maxEnergyLoss,precision,minStepSize); + + + // Carbon + a = 12.011; + z = 6.; + density = 2.265; + radiationLength = 18.8; + maxBending = 10; + maxStepSize = .01; + precision = .003; + minStepSize = .003; + id = kCarbonId; + AliMaterial(id, "Carbon$", a, z, density, radiationLength, absorbtionLength); + AliMedium(kCarbonId, "Carbon$", id,0,fieldType,maxField,maxBending, + maxStepSize,maxEnergyLoss,precision,minStepSize); + + // Aluminum + a = 26.981539; + z = 13.; + density = 2.7; + radiationLength = 8.9; + id = kAlId; + AliMaterial(id, "Aluminum$",a,z, density, radiationLength, absorbtionLength); + AliMedium(kAlId, "Aluminum$", id, 0, fieldType, maxField, maxBending, + maxStepSize, maxEnergyLoss, precision, minStepSize); - new TTUBE("S_FMD2","FMD volume 2","void",4.73,17.7,1.5); - top->cd(); - node = new TNode("FMD2","FMD2","S_FMD2",0,0,-64,""); - node->SetLineColor(kColorFMD); - fNodes->Add(node); - - new TTUBE("S_FMD3","FMD volume 3","void",23.4,36.,1.5); - top->cd(); - node = new TNode("FMD3","FMD3","S_FMD3",0,0,-85,""); - node->SetLineColor(kColorFMD); - fNodes->Add(node); - - new TTUBE("S_FMD4","FMD volume 4","void",5,15,0.015); - top->cd(); - node = new TNode("FMD4","FMD4","S_FMD4",0,0,-270,""); - node->SetLineColor(kColorFMD); - fNodes->Add(node); + // Copper + a = 63.546; + z = 29; + density = 8.96; + radiationLength = 1.43; + id = kCopperId; + AliMaterial(id, "Copper$", + a, z, density, radiationLength, absorbtionLength); + AliMedium(kCopperId, "Copper$", id, 0, fieldType, maxField, maxBending, + maxStepSize, maxEnergyLoss, precision, minStepSize); - new TTUBE("S_FMD5","FMD volume 5","void",5,14,0.015); - top->cd(); - node = new TNode("FMD5","FMD5","S_FMD5",0,0,-630,""); - node->SetLineColor(kColorFMD); - fNodes->Add(node); + + // Silicon chip + { + Float_t as[] = { 12.0107, 14.0067, 15.9994, + 1.00794, 28.0855, 107.8682 }; + Float_t zs[] = { 6., 7., 8., + 1., 14., 47. }; + Float_t ws[] = { 0.039730642, 0.001396798, 0.01169634, + 0.004367771, 0.844665, 0.09814344903 }; + density = 2.36436; + maxBending = 10; + maxStepSize = .01; + precision = .003; + minStepSize = .003; + id = kSiChipId; + AliMixture(id, "Si Chip$", as, zs, density, 6, ws); + AliMedium(kSiChipId, "Si Chip$", id, 0, fieldType, maxField, maxBending, + maxStepSize, maxEnergyLoss, precision, minStepSize); + } + + // Kaption + { + Float_t as[] = { 1.00794, 12.0107, 14.010, 15.9994}; + Float_t zs[] = { 1., 6., 7., 8.}; + Float_t ws[] = { 0.026362, 0.69113, 0.07327, 0.209235}; + density = 1.42; + maxBending = 1; + maxStepSize = .001; + precision = .001; + minStepSize = .001; + id = kKaptonId; + AliMixture(id, "Kaption$", as, zs, density, 4, ws); + AliMedium(kKaptonId, "Kaption$", id,0,fieldType,maxField,maxBending, + maxStepSize,maxEnergyLoss,precision,minStepSize); + } + + // Air + { + Float_t as[] = { 12.0107, 14.0067, 15.9994, 39.948 }; + Float_t zs[] = { 6., 7., 8., 18. }; + Float_t ws[] = { 0.000124, 0.755267, 0.231781, 0.012827 }; + density = .00120479; + maxBending = 1; + maxStepSize = .001; + precision = .001; + minStepSize = .001; + id = kAirId; + AliMixture(id, "Air$", as, zs, density, 4, ws); + AliMedium(kAirId, "Air$", id,0,fieldType,maxField,maxBending, + maxStepSize,maxEnergyLoss,precision,minStepSize); + } + + // PCB + { + Float_t zs[] = { 14., 20., 13., 12., + 5., 22., 11., 19., + 26., 9., 8., 6., + 7., 1.}; + Float_t as[] = { 28.0855, 40.078, 26.981538, 24.305, + 10.811, 47.867, 22.98977, 39.0983, + 55.845, 18.9984, 15.9994, 12.0107, + 14.0067, 1.00794}; + Float_t ws[] = { 0.15144894, 0.08147477, 0.04128158, 0.00904554, + 0.01397570, 0.00287685, 0.00445114, 0.00498089, + 0.00209828, 0.00420000, 0.36043788, 0.27529426, + 0.01415852, 0.03427566}; + density = 1.8; + maxBending = 1; + maxStepSize = .001; + precision = .001; + minStepSize = .001; + id = kPcbId; + AliMixture(id, "PCB$", as, zs, density, 14, ws); + AliMedium(kPcbId, "PCB$", id,0,fieldType,maxField,maxBending, + maxStepSize,maxEnergyLoss,precision,minStepSize); + } + + // Stainless steel + { + Float_t as[] = { 55.847, 51.9961, 58.6934, 28.0855 }; + Float_t zs[] = { 26., 24., 28., 14. }; + Float_t ws[] = { .715, .18, .1, .005 }; + density = 7.88; + id = kSteelId; + AliMixture(id, "Steel$", as, zs, density, 4, ws); + AliMedium(kSteelId, "Steel$", id, 0, fieldType, maxField, maxBending, + maxStepSize, maxEnergyLoss, precision, minStepSize); + } + // Plastic + { + Float_t as[] = { 1.01, 12.01 }; + Float_t zs[] = { 1., 6. }; + Float_t ws[] = { 1., 1. }; + density = 1.03; + maxBending = 10; + maxStepSize = .01; + precision = .003; + minStepSize = .003; + id = kPlasticId; + AliMixture(id, "Plastic$", as, zs, density, -2, ws); + AliMedium(kPlasticId, "Plastic$", id,0,fieldType,maxField,maxBending, + maxStepSize,maxEnergyLoss,precision,minStepSize); + } } - -//_____________________________________________________________________________ -Int_t AliFMD::DistanceToPrimitive(Int_t px, Int_t py) + +#if 0 +//____________________________________________________________________ +void +AliFMD::SetTrackingParameters(Int_t imed, + Float_t gamma, + Float_t electron, + Float_t neutral_hadron, + Float_t charged_hadron, + Float_t muon, + Float_t electron_bremstrahlung, + Float_t muon__bremstrahlung, + Float_t electron_delta, + Float_t muon_delta, + Float_t muon_pair, + Int_t annihilation, + Int_t bremstrahlung, + Int_t compton_scattering, + Int_t decay, + Int_t delta_ray, + Int_t hadronic, + Int_t energy_loss, + Int_t multiple_scattering, + Int_t pair_production, + Int_t photon_production, + Int_t rayleigh_scattering) { - // - // Calculate the distance from the mouse to the FMD on the screen - // Dummy routine - // - return 9999; + // Disabled by request of FCA, kept for reference only + if (!TVirtualMC::GetMC()) return; + TArrayI& idtmed = *(GetIdtmed()); + Int_t iimed = idtmed[imed]; + // TVirtualMC::GetMC()->Gstpar(iimed, "CUTGAM", gamma); + // TVirtualMC::GetMC()->Gstpar(iimed, "CUTELE", electron); + // TVirtualMC::GetMC()->Gstpar(iimed, "CUTNEU", neutral_hadron); + // TVirtualMC::GetMC()->Gstpar(iimed, "CUTHAD", charged_hadron); + // TVirtualMC::GetMC()->Gstpar(iimed, "CUTMUO", muon); + // TVirtualMC::GetMC()->Gstpar(iimed, "BCUTE", electron_bremstrahlung); + // TVirtualMC::GetMC()->Gstpar(iimed, "BCUTM", muon__bremstrahlung); + // TVirtualMC::GetMC()->Gstpar(iimed, "DCUTE", electron_delta); + // TVirtualMC::GetMC()->Gstpar(iimed, "DCUTM", muon_delta); + // TVirtualMC::GetMC()->Gstpar(iimed, "PPCUTM", muon_pair); + // TVirtualMC::GetMC()->Gstpar(iimed, "ANNI", Float_t(annihilation)); + // TVirtualMC::GetMC()->Gstpar(iimed, "BREM", Float_t(bremstrahlung)); + // TVirtualMC::GetMC()->Gstpar(iimed, "COMP", Float_t(compton_scattering)); + // TVirtualMC::GetMC()->Gstpar(iimed, "DCAY", Float_t(decay)); + // TVirtualMC::GetMC()->Gstpar(iimed, "DRAY", Float_t(delta_ray)); + // TVirtualMC::GetMC()->Gstpar(iimed, "HADR", Float_t(hadronic)); + // TVirtualMC::GetMC()->Gstpar(iimed, "LOSS", Float_t(energy_loss)); + // TVirtualMC::GetMC()->Gstpar(iimed, "MULS", Float_t(multiple_scattering)); + // TVirtualMC::GetMC()->Gstpar(iimed, "PAIR", Float_t(pair_production)); + // TVirtualMC::GetMC()->Gstpar(iimed, "PHOT", Float_t(photon_production)); + // TVirtualMC::GetMC()->Gstpar(iimed, "RAYL", Float_t(rayleigh_scattering)); } -//___________________________________________ -void AliFMD::ResetHits() +#endif + +//____________________________________________________________________ +void +AliFMD::Init() { - // Reset number of clusters and the cluster array for this detector - AliDetector::ResetHits(); + // Initialize the detector + // + AliFMDDebug(1, ("Initialising FMD detector object")); + TVirtualMC* mc = TVirtualMC::GetMC(); + AliFMDGeometry* fmd = AliFMDGeometry::Instance(); + TArrayI actGeo = fmd->ActiveIds(); + bool valid = true; + if (actGeo.fN <= 0) valid = false; + else { + for (int i = 0; i < actGeo.fN; i++) { + if (actGeo[i] < 0) { + valid = false; + break; + } + } + } + if (!valid) { + AliFMDDebug(1, ("Extracting geometry info from loaded geometry")); + fmd->ExtractGeomInfo(); + actGeo = fmd->ActiveIds(); + } + TArrayI actVmc(actGeo.fN); + for (Int_t i = 0; i < actGeo.fN; i++) { + if (actGeo[i] < 0) { + AliError(Form("Invalid id: %d", actGeo[i])); + continue; + } + TGeoVolume *sens = gGeoManager->GetVolume(actGeo[i]); + if (!sens) { + AliError(Form("No TGeo volume for sensitive volume ID=%d",actGeo[i])); + continue; + } + actVmc[i] = mc->VolId(sens->GetName()); + AliFMDDebug(1, ("Active vol id # %d: %d changed to %d", + i, actGeo[i], actVmc[i])); + } + fmd->SetActive(actVmc.fArray, actVmc.fN); + // fmd->InitTransformations(); } -//____________________________________________ -void AliFMD::ResetDigits() +//____________________________________________________________________ +void +AliFMD::FinishEvent() { - // - // Reset number of digits and the digits array for this detector - AliDetector::ResetHits(); - // + // Called at the end of the an event in simulations. If the debug + // level is high enough, then the `bad' hits are printed. + // + if (AliLog::GetDebugLevel("FMD", "AliFMD") < 10) return; + if (fBad && fBad->GetEntries() > 0) { + AliWarning(Form("got %d 'bad' hits", fBad->GetEntries())); + TIter next(fBad); + AliFMDHit* hit; + while ((hit = static_cast (next()))) hit->Print("D"); + fBad->Clear(); + } } -//------------------------------------------------------------------------- -void AliFMD::Init() + + +//==================================================================== +// +// Hit and Digit managment +// +//____________________________________________________________________ +void +AliFMD::MakeBranch(Option_t * option) { + // Create Tree branches for the FMD. // - // Initialis the FMD after it has been built - Int_t i; - AliMC* pMC = AliMC::GetMC(); - // - printf("\n"); - for(i=0;i<35;i++) printf("*"); - printf(" FMD_INIT "); - for(i=0;i<35;i++) printf("*"); - printf("\n"); - // - // Here the FMD initialisation code (if any!) - for(i=0;i<80;i++) printf("*"); - printf("\n"); - // + // Options: // - fIdSens1=pMC->VolId("GRIN"); //Si sensetive volume - + // H Make a branch of TClonesArray of AliFMDHit's + // D Make a branch of TClonesArray of AliFMDDigit's + // S Make a branch of TClonesArray of AliFMDSDigit's + // + const Int_t kBufferSize = 16000; + TString branchname(GetName()); + TString opt(option); + + if (opt.Contains("H", TString::kIgnoreCase)) { + HitsArray(); + AliDetector::MakeBranch(option); + } + if (opt.Contains("D", TString::kIgnoreCase)) { + DigitsArray(); + MakeBranchInTree(fLoader->TreeD(), branchname.Data(), + &fDigits, kBufferSize, 0); + } + if (opt.Contains("S", TString::kIgnoreCase)) { + SDigitsArray(); + MakeBranchInTree(fLoader->TreeS(), branchname.Data(), + &fSDigits, kBufferSize, 0); + } } -//--------------------------------------------------------------------- -void AliFMD::MakeBranch(Option_t* option, char *file) -{ - // Create Tree branches for the FMD. - const Int_t kBufferSize = 4000; - char branchname[10]; - sprintf(branchname,"%s",GetName()); - AliDetector::MakeBranch(option,file); +//____________________________________________________________________ +void +AliFMD::SetTreeAddress() +{ + // Set branch address for the Hits, Digits, and SDigits Tree. + if (fLoader->TreeH()) HitsArray(); + AliDetector::SetTreeAddress(); - const char *cD = strstr(option,"D"); - - if (cD) { - - gAlice->MakeBranchInTree(gAlice->TreeD(), - branchname, &fDigits, kBufferSize, file) ; + TTree *treeD = fLoader->TreeD(); + if (treeD) { + DigitsArray(); + TBranch* branch = treeD->GetBranch ("FMD"); + if (branch) branch->SetAddress(&fDigits); + } - printf("Making Branch %s for digits\n",branchname); - gAlice->TreeD()->Print(); + TTree *treeS = fLoader->TreeS(); + if (treeS) { + SDigitsArray(); + TBranch* branch = treeS->GetBranch ("FMD"); + if (branch) branch->SetAddress(&fSDigits); } } - -//_____________________________________________________________________________ -void AliFMD::SetTreeAddress() -{ - // Set branch address for the Hits and Digits Tree. - char branchname[30]; - AliDetector::SetTreeAddress(); - TBranch *branch; - TTree *treeD = gAlice->TreeD(); +//____________________________________________________________________ +void +AliFMD::SetHitsAddressBranch(TBranch *b) +{ + // Set the TClonesArray to read hits into. + b->SetAddress(&fHits); +} +//____________________________________________________________________ +void +AliFMD::SetSDigitsAddressBranch(TBranch *b) +{ + // Set the TClonesArray to read hits into. + b->SetAddress(&fSDigits); +} +//____________________________________________________________________ +void +AliFMD::AddHit(Int_t track, Int_t *vol, Float_t *hits) +{ + // Add a hit to the hits tree + // + // The information of the two arrays are decoded as + // + // Parameters + // track Track # + // ivol[0] [UShort_t ] Detector # + // ivol[1] [Char_t ] Ring ID + // ivol[2] [UShort_t ] Sector # + // ivol[3] [UShort_t ] Strip # + // hits[0] [Float_t ] Track's X-coordinate at hit + // hits[1] [Float_t ] Track's Y-coordinate at hit + // hits[3] [Float_t ] Track's Z-coordinate at hit + // hits[4] [Float_t ] X-component of track's momentum + // hits[5] [Float_t ] Y-component of track's momentum + // hits[6] [Float_t ] Z-component of track's momentum + // hits[7] [Float_t ] Energy deposited by track + // hits[8] [Int_t ] Track's particle Id # + // hits[9] [Float_t ] Time when the track hit + // + // + AddHitByFields(track, + UShort_t(vol[0]), // Detector # + Char_t(vol[1]), // Ring ID + UShort_t(vol[2]), // Sector # + UShort_t(vol[3]), // Strip # + hits[0], // X + hits[1], // Y + hits[2], // Z + hits[3], // Px + hits[4], // Py + hits[5], // Pz + hits[6], // Energy loss + Int_t(hits[7]), // PDG + hits[8]); // Time +} - if (treeD) { - if (fDigits) { - branch = treeD->GetBranch(branchname); - if (branch) branch->SetAddress(&fDigits); - } - +//____________________________________________________________________ +AliFMDHit* +AliFMD::AddHitByFields(Int_t track, + UShort_t detector, + Char_t ring, + UShort_t sector, + UShort_t strip, + Float_t x, + Float_t y, + Float_t z, + Float_t px, + Float_t py, + Float_t pz, + Float_t edep, + Int_t pdg, + Float_t t, + Float_t l, + Bool_t stop) +{ + // Add a hit to the list + // + // Parameters: + // + // track Track # + // detector Detector # (1, 2, or 3) + // ring Ring ID ('I' or 'O') + // sector Sector # (For inner/outer rings: 0-19/0-39) + // strip Strip # (For inner/outer rings: 0-511/0-255) + // x Track's X-coordinate at hit + // y Track's Y-coordinate at hit + // z Track's Z-coordinate at hit + // px X-component of track's momentum + // py Y-component of track's momentum + // pz Z-component of track's momentum + // edep Energy deposited by track + // pdg Track's particle Id # + // t Time when the track hit + // l Track length through the material. + // stop Whether track was stopped or disappeared + // + TClonesArray& a = *(HitsArray()); + // Search through the list of already registered hits, and see if we + // find a hit with the same parameters. If we do, then don't create + // a new hit, but rather update the energy deposited in the hit. + // This is done, so that a FLUKA based simulation will get the + // number of hits right, not just the enerrgy deposition. + AliFMDHit* hit = 0; + for (Int_t i = 0; i < fNhits; i++) { + if (!a.At(i)) continue; + hit = static_cast (a.At(i)); + if (hit->Detector() == detector + && hit->Ring() == ring + && hit->Sector() == sector + && hit->Strip() == strip + && hit->Track() == track) { + AliFMDDebug(1, ("already had a hit in FMD%d%c[%2d,%3d] for track # %d," + " adding energy (%f) to that hit (%f) -> %f", + detector, ring, sector, strip, track, edep, hit->Edep(), + hit->Edep() + edep)); + hit->SetEdep(hit->Edep() + edep); + return hit; + } } - if(fSDigits) - fSDigits->Clear(); + // If hit wasn't already registered, do so know. + hit = new (a[fNhits]) AliFMDHit(fIshunt, track, detector, ring, sector, + strip, x, y, z, px, py, pz, edep, pdg, t, + l, stop); + // TVirtualMC::GetMC()->AddTrackReference(track, 12); + fNhits++; + + //Reference track - if (gAlice->TreeS() && fSDigits ) { - branch = gAlice->TreeS()->GetBranch("FMD"); - if (branch) branch->SetAddress(&fSDigits) ; - } + AliMC *mcApplication = (AliMC*)gAlice->GetMCApp(); + + AliTrackReference* trackRef = + AddTrackReference(mcApplication->GetCurrentTrackNumber(), + AliTrackReference::kFMD); + UInt_t stripId = AliFMDStripIndex::Pack(detector,ring,sector,strip); + UInt_t dedx = AliFMDEncodedEdx::Encode(edep, l); + + trackRef->SetUserId((dedx << 19) | stripId); + + return hit; +} +//____________________________________________________________________ +void +AliFMD::AddDigit(Int_t* digits, Int_t*) +{ + // Add a digit to the Digit tree + // + // Paramters + // + // digits[0] [UShort_t] Detector # + // digits[1] [Char_t] Ring ID + // digits[2] [UShort_t] Sector # + // digits[3] [UShort_t] Strip # + // digits[4] [UShort_t] ADC Count + // digits[5] [Short_t] ADC Count, -1 if not used + // digits[6] [Short_t] ADC Count, -1 if not used + // + AddDigitByFields(UShort_t(digits[0]), // Detector # + Char_t(digits[1]), // Ring ID + UShort_t(digits[2]), // Sector # + UShort_t(digits[3]), // Strip # + UShort_t(digits[4]), // ADC Count1 + Short_t(digits[5]), // ADC Count2 + Short_t(digits[6]), // ADC Count3 + Short_t(digits[7])); } -//--------------------------------------------------------------------- -/* -void AliFMD::SDigits2Digits() +//____________________________________________________________________ +void +AliFMD::AddDigitByFields(UShort_t detector, + Char_t ring, + UShort_t sector, + UShort_t strip, + UShort_t count1, + Short_t count2, + Short_t count3, + Short_t count4, + UShort_t nrefs, + Int_t* refs) { - Int_t ibg=0, bgr=0; - Int_t nbgr_ev= 0; - - if (ibg) { - printf("nbgr_ev %d\n",nbgr_ev); - // Hit2Digits(nbgr_ev,"Add"," ","galice_bgr.root"); - } - else { - // Hit2Digits(nbgr_ev,"rien","",""); - } + // add a real digit - as coming from data + // + // Parameters + // + // detector Detector # (1, 2, or 3) + // ring Ring ID ('I' or 'O') + // sector Sector # (For inner/outer rings: 0-19/0-39) + // strip Strip # (For inner/outer rings: 0-511/0-255) + // count1 ADC count (a 10-bit word) + // count2 ADC count (a 10-bit word), or -1 if not used + // count3 ADC count (a 10-bit word), or -1 if not used + TClonesArray& a = *(DigitsArray()); + + AliFMDDebug(15, ("Adding digit # %5d/%5d for FMD%d%c[%2d,%3d]" + "=(%d,%d,%d,%d) with %d tracks", + fNdigits-1, a.GetEntriesFast(), + detector, ring, sector, strip, + count1, count2, count3, count4, nrefs)); + new (a[fNdigits++]) + AliFMDDigit(detector, ring, sector, strip, + count1, count2, count3, count4, nrefs, refs); + +} +//____________________________________________________________________ +void +AliFMD::AddSDigit(Int_t* digits) +{ + // Add a digit to the SDigit tree + // + // Paramters + // + // digits[0] [UShort_t] Detector # + // digits[1] [Char_t] Ring ID + // digits[2] [UShort_t] Sector # + // digits[3] [UShort_t] Strip # + // digits[4] [Float_t] Total energy deposited + // digits[5] [UShort_t] ADC Count + // digits[6] [Short_t] ADC Count, -1 if not used + // digits[7] [Short_t] ADC Count, -1 if not used + // + AddSDigitByFields(UShort_t(digits[0]), // Detector # + Char_t(digits[1]), // Ring ID + UShort_t(digits[2]), // Sector # + UShort_t(digits[3]), // Strip # + Float_t(digits[4]), // Edep + UShort_t(digits[5]), // ADC Count1 + Short_t(digits[6]), // ADC Count2 + Short_t(digits[7]), // ADC Count3 + Short_t(digits[8]), // ADC Count4 + UShort_t(digits[9]), // N particles + UShort_t(digits[10])); // N primaries } -*/ -//--------------------------------------------------------------------- +//____________________________________________________________________ +void +AliFMD::AddSDigitByFields(UShort_t detector, + Char_t ring, + UShort_t sector, + UShort_t strip, + Float_t edep, + UShort_t count1, + Short_t count2, + Short_t count3, + Short_t count4, + UShort_t ntot, + UShort_t nprim, + Int_t* refs) +{ + // add a summable digit + // + // Parameters + // + // detector Detector # (1, 2, or 3) + // ring Ring ID ('I' or 'O') + // sector Sector # (For inner/outer rings: 0-19/0-39) + // strip Strip # (For inner/outer rings: 0-511/0-255) + // edep Total energy deposited + // count1 ADC count (a 10-bit word) + // count2 ADC count (a 10-bit word), or -1 if not used + // count3 ADC count (a 10-bit word), or -1 if not used + // + TClonesArray& a = *(SDigitsArray()); + // AliFMDDebug(0, ("Adding sdigit # %d", fNsdigits)); + + AliFMDDebug(15, ("Adding sdigit # %5d/%5d for FMD%d%c[%2d,%3d]" + "=(%d,%d,%d,%d) with %d tracks %d primaries (%p)", + fNsdigits-1, a.GetEntriesFast(), + detector, ring, sector, strip, + count1, count2, count3, count4, ntot, nprim, refs)); + new (a[fNsdigits++]) + AliFMDSDigit(detector, ring, sector, strip, edep, + count1, count2, count3, count4, ntot, nprim, refs); +} + +//____________________________________________________________________ +void +AliFMD::ResetSDigits() +{ + // Reset number of digits and the digits array for this detector. + // + fNsdigits = 0; + if (fSDigits) fSDigits->Clear(); +} + + +//____________________________________________________________________ +TClonesArray* +AliFMD::HitsArray() +{ + // Initialize hit array if not already, and return pointer to it. + if (!fHits) { + fHits = new TClonesArray("AliFMDHit", 1000); + fNhits = 0; + if (gAlice && gAlice->GetMCApp() && gAlice->GetMCApp()->GetHitLists()) + gAlice->GetMCApp()->AddHitList(fHits); + } + return fHits; +} +//____________________________________________________________________ +TClonesArray* +AliFMD::DigitsArray() +{ + // Initialize digit array if not already, and return pointer to it. + if (!fDigits) { + fDigits = new TClonesArray("AliFMDDigit", 1000); + fNdigits = 0; + } + return fDigits; +} -void AliFMD::Eta2Radius(Float_t eta, Float_t zDisk, Float_t *radius) +//____________________________________________________________________ +TClonesArray* +AliFMD::SDigitsArray() { - Float_t expEta=TMath::Exp(-eta); - Float_t theta=TMath::ATan(expEta); - theta=2.*theta; - Float_t rad=zDisk*(TMath::Tan(theta)); - *radius=rad; - - printf(" eta %f radius %f\n", eta, rad); + // Initialize digit array if not already, and return pointer to it. + if (!fSDigits) { + fSDigits = new TClonesArray("AliFMDSDigit", 1000); + fNsdigits = 0; + } + return fSDigits; } -//--------------------------------------------------------------------- +//==================================================================== +// +// Digitization +// +//____________________________________________________________________ +void +AliFMD::Hits2Digits() +{ + // Create AliFMDDigit's from AliFMDHit's. This is done by making a + // AliFMDDigitizer, and executing that code. + // + AliFMDHitDigitizer digitizer(this, AliFMDHitDigitizer::kDigits); + digitizer.Init(); + digitizer.Digitize(""); +} -void AliFMD::Hits2SDigits(){ -#ifdef DEBUG - cout<<"ALiFMD::Hits2SDigits> start...\n"; +//____________________________________________________________________ +void +AliFMD::Hits2SDigits() +{ + // Create AliFMDSDigit's from AliFMDHit's. This is done by creating + // an AliFMDSDigitizer object, and executing it. + // + AliFMDHitDigitizer digitizer(this, AliFMDHitDigitizer::kSDigits); + digitizer.Init(); + digitizer.Digitize(""); +} + + +//____________________________________________________________________ +AliDigitizer* +AliFMD::CreateDigitizer(AliDigitizationInput* digInput) const +{ + // Create a digitizer object + + /* This is what we probably _should_ do */ + AliFMDBaseDigitizer* digitizer = 0; + +#ifdef USE_SSDIGITIZER + digitizer = new AliFMDSSDigitizer(digInput); +#else + /* This is what we actually do, and will work */ +#if 0 + AliInfo("SDigit->Digit conversion not really supported, " + "doing Hit->Digit conversion instead"); +#endif + digitizer = new AliFMDDigitizer(digInput); #endif - char * fileSDigits = 0 ; - char * fileHeader=0 ; - AliFMDSDigitizer * sd = new AliFMDSDigitizer("mgalice.root","FMD.SDigit.root") ; - sd->Exec("") ; - sd->Print(""); + return digitizer; +} + +//==================================================================== +// +// Raw data simulation +// +//__________________________________________________________________ +void +AliFMD::Digits2Raw() +{ + // Turn digits into raw data. + // + // This uses the class AliFMDRawWriter to do the job. Please refer + // to that class for more information. + AliFMDRawWriter writer(this); + writer.Exec(); +} + +//==================================================================== +// +// Raw data reading +// +//__________________________________________________________________ +Bool_t +AliFMD::Raw2SDigits(AliRawReader* reader) +{ + // Turn digits into raw data. + // + // This uses the class AliFMDRawWriter to do the job. Please refer + // to that class for more information. + AliFMDParameters::Instance()->Init(); + MakeTree("S"); + MakeBranch("S"); + + TClonesArray* sdigits = SDigits(); + AliFMDReconstructor rec; - delete sd ; + // The two boolean arguments + // Make sdigits instead of digits + // Subtract the pedestal off the signal + rec.Digitize(reader, sdigits); + // + // Bool_t ret = fmdReader.ReadAdcs(sdigits, kTRUE, kTRUE); + // sdigits->ls(); + UShort_t ns = sdigits->GetEntriesFast(); + if (AliLog::GetDebugLevel("FMD", 0) > 5) { + for (UShort_t i = 0; i < ns; i++) + sdigits->At(i)->Print("pl"); + } + AliFMDDebug(1, ("Got a total of %d SDigits", ns)); + + fLoader->TreeS()->Fill(); + ResetSDigits(); + fLoader->WriteSDigits("OVERWRITE"); + + return kTRUE; } +//==================================================================== +// +// Utility +// +//__________________________________________________________________ +void +AliFMD::Browse(TBrowser* b) +{ + // Browse this object. + // + AliFMDDebug(30, ("\tBrowsing the FMD")); + AliDetector::Browse(b); + b->Add(AliFMDGeometry::Instance()); +} + +//____________________________________________________________________ +void +AliFMD::AddAlignableVolumes() const +{ + // + // Create entries for alignable volumes associating the symbolic volume + // name with the corresponding volume path. Needs to be syncronized with + // eventual changes in the geometry. + // + // This code was made by Raffaele Grosso . I + // (cholm) will probably want to change it. For one, I think it + // should be the job of the geometry manager to deal with this. + AliInfo("Add FMD alignable volumes"); + AliFMDGeometry::Instance()->SetAlignableVolumes(); +#if 0 + for(size_t f = 1; f <= 3; f++){ // Detector 1,2,3 + for(size_t tb = 0; tb <2 ; tb++){ // Top/Bottom + char stb = tb == 0 ? 'T' : 'B'; + unsigned min = tb == 0 ? 0 : 5; + TString halfVol(Form("/ALIC_1/F%dM%c_%d", f, stb, f)); + TString halfSym(halfVol); + if(!gGeoManager->SetAlignableEntry(halfSym.Data(),halfVol.Data())) + AliFatal(Form("Alignable entry %s not created. " + "Volume path %s not valid", + halfSym.Data(),halfVol.Data())); + for(size_t io = 0; io < 2; io++){ // inner, outer + if (f==1 && io==1) continue; // Only one ring in FMD1 + if(tb == 1 && io==1) min=10; + char sio = (io == 0 ? 'I' : 'O'); + unsigned nio = (io == 0 ? 3 : 9); + unsigned max = (io == 0 ? 5 : 10) + min; + + for(size_t i = min; i < max; i++) { // Modules + TString modVol(Form("%s/F%c%cV_7%d/F%cSE_%d", halfVol.Data(), + sio, stb, nio, sio, i)); + TString modSym(modVol); + if(!gGeoManager->SetAlignableEntry(modSym.Data(),modVol.Data())) + AliFatal(Form("Alignable entry %s not created. " + "Volume path %s not valid", + modSym.Data(), modVol.Data())); + } + } + } + } +#endif +} +//___________________________________________________________________ +// +// EOF +//