X-Git-Url: http://git.uio.no/git/?a=blobdiff_plain;f=TOF%2FAliTOFv3.cxx;h=4c871b3bf6810bc888525ea122714ca0fbb7181b;hb=773aff84eae2782e3e24e55c39d9546dfe1c0ca9;hp=d2faa91491e983ab0361214e5c70d2ddbe60e92c;hpb=2cef3cb2617df87d8d669939d557c1b83e880d2a;p=u%2Fmrichter%2FAliRoot.git
diff --git a/TOF/AliTOFv3.cxx b/TOF/AliTOFv3.cxx
index d2faa91491e..4c871b3bf68 100644
--- a/TOF/AliTOFv3.cxx
+++ b/TOF/AliTOFv3.cxx
@@ -13,71 +13,51 @@
* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.14.2.1 2000/05/10 09:37:16 vicinanz
-New version with Holes for PHOS/RICH
-
-Revision 1.14 1999/11/05 22:39:06 fca
-New hits structure
-
-Revision 1.13 1999/11/02 11:26:39 fca
-added stdlib.h for exit
-
-Revision 1.12 1999/11/01 20:41:57 fca
-Added protections against using the wrong version of FRAME
-
-Revision 1.11 1999/10/22 08:04:14 fca
-Correct improper use of negative parameters
-
-Revision 1.10 1999/10/16 19:30:06 fca
-Corrected Rotation Matrix and CVS log
-
-Revision 1.9 1999/10/15 15:35:20 fca
-New version for frame1099 with and without holes
-
-Revision 1.8 1999/09/29 09:24:33 fca
-Introduction of the Copyright and cvs Log
-
-*/
+/* $Id$ */
///////////////////////////////////////////////////////////////////////////////
// //
-// Time Of Flight: design of C.Williams
-//
-// This class contains the functions for version 1 of the Time Of Flight //
+// This class contains the functions for version 3 of the Time Of Flight //
// detector. //
-//
-// VERSION WITH 5 MODULES AND TILTED STRIPS
-//
-// HOLES FOR RICH DETECTOR
-//
-// Authors:
-//
-// Alessio Seganti
-// Domenico Vicinanza
-//
-// University of Salerno - Italy
-//
-//
-//Begin_Html
-/*
-
-*/
-//End_Html
+// //
+// VERSION WITH 5 MODULES AND TILTED STRIPS //
+// HITS DEFINED FOR THIS VERSION //
+// HOLES FOR HMPID DETECTOR //
+// //
+// Authors: //
+// //
+// Alessio Seganti //
+// Domenico Vicinanza //
+// //
+// University of Salerno - Italy //
+// //
+// Fabrizio Pierella //
+// University of Bologna - Italy //
+// //
+// //
+//Begin_Html //
+/* //
+ //
+*/ //
+//End_Html //
// //
///////////////////////////////////////////////////////////////////////////////
-#include
+#include
#include
-#include "AliTOFv3.h"
-#include "TBRIK.h"
-#include "TNode.h"
-#include "TObject.h"
-#include "AliRun.h"
-#include "AliConst.h"
+#include
+#include
+#include
+#include
+#include
+#include
+#include "AliConst.h"
+#include "AliRun.h"
+#include "AliTOFv3.h"
+#include "AliTOFConstants.h" // AdC
+#include "AliMC.h"
ClassImp(AliTOFv3)
@@ -99,101 +79,106 @@ AliTOFv3::AliTOFv3(const char *name, const char *title)
//
// Check that FRAME is there otherwise we have no place where to
// put TOF
- AliModule* FRAME=gAlice->GetModule("FRAME");
- if(!FRAME) {
+ AliModule* frame=gAlice->GetModule("FRAME");
+ if(!frame) {
Error("Ctor","TOF needs FRAME to be present\n");
exit(1);
} else
- if(FRAME->IsVersion()!=1) {
+ if(frame->IsVersion()!=1) {
Error("Ctor","FRAME version 1 needed with this version of TOF\n");
exit(1);
}
}
-//_____________________________________________________________________________
+//____________________________________________________________________________
+
void AliTOFv3::BuildGeometry()
{
//
// Build TOF ROOT geometry for the ALICE event display
//
- TNode *Node, *Top;
+ TNode *node, *top;
const int kColorTOF = 27;
-
+
// Find top TNODE
- Top = gAlice->GetGeometry()->GetNode("alice");
-
+ top = gAlice->GetGeometry()->GetNode("alice");
+
// Position the different copies
- const Float_t rTof =(fRmax+fRmin)/2;
- const Float_t hTof = fRmax-fRmin;
- const Int_t fNTof = 18;
+ const Float_t krTof =(fRmax+fRmin)/2;
+ const Float_t khTof = fRmax-fRmin;
+ const Int_t kNTof = fNTof;
const Float_t kPi = TMath::Pi();
- const Float_t angle = 2*kPi/fNTof;
+ const Float_t kangle = 2*kPi/kNTof;
Float_t ang;
-
+
+ // define offset for nodes
+ Float_t zOffsetC = fZtof - fZlenC*0.5;
+ Float_t zOffsetB = fZtof - fZlenC - fZlenB*0.5;
+ Float_t zOffsetA = 0.;
// Define TOF basic volume
- char NodeName0[6], NodeName1[6], NodeName2[6];
- char NodeName3[6], NodeName4[6], RotMatNum[6];
-
+ char nodeName0[7], nodeName1[7], nodeName2[7];
+ char nodeName3[7], nodeName4[7], rotMatNum[7];
+
new TBRIK("S_TOF_C","TOF box","void",
- 120*0.5,hTof*0.5,fZlenC*0.5);
+ fStripLn*0.5,khTof*0.5,fZlenC*0.5);
new TBRIK("S_TOF_B","TOF box","void",
- 120*0.5,hTof*0.5,fZlenB*0.5);
+ fStripLn*0.5,khTof*0.5,fZlenB*0.5);
new TBRIK("S_TOF_A","TOF box","void",
- 120*0.5,hTof*0.5,fZlenA*0.5);
-
- for (Int_t NodeNum=1;NodeNum<19;NodeNum++){
-
- if (NodeNum<10) {
- sprintf(RotMatNum,"rot50%i",NodeNum);
- sprintf(NodeName0,"FTO00%i",NodeNum);
- sprintf(NodeName1,"FTO10%i",NodeNum);
- sprintf(NodeName2,"FTO20%i",NodeNum);
- sprintf(NodeName3,"FTO30%i",NodeNum);
- sprintf(NodeName4,"FTO40%i",NodeNum);
- }
- if (NodeNum>9) {
- sprintf(RotMatNum,"rot5%i",NodeNum);
- sprintf(NodeName0,"FTO0%i",NodeNum);
- sprintf(NodeName1,"FTO1%i",NodeNum);
- sprintf(NodeName2,"FTO2%i",NodeNum);
- sprintf(NodeName3,"FTO3%i",NodeNum);
- sprintf(NodeName4,"FTO4%i",NodeNum);
- }
-
- new TRotMatrix(RotMatNum,RotMatNum,90,-20*NodeNum,90,90-20*NodeNum,0,0);
- ang = (4.5-NodeNum) * angle;
-
- Top->cd();
- Node = new TNode(NodeName0,NodeName0,"S_TOF_C",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),299.15,RotMatNum);
- Node->SetLineColor(kColorTOF);
- fNodes->Add(Node);
-
- Top->cd();
- Node = new TNode(NodeName1,NodeName1,"S_TOF_C",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),-299.15,RotMatNum);
- Node->SetLineColor(kColorTOF);
- fNodes->Add(Node);
-if (NodeNum !=1 && NodeNum!=2 && NodeNum !=18)
- {
- Top->cd();
- Node = new TNode(NodeName2,NodeName2,"S_TOF_B",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),146.45,RotMatNum);
- Node->SetLineColor(kColorTOF);
- fNodes->Add(Node);
-
- Top->cd();
- Node = new TNode(NodeName3,NodeName3,"S_TOF_B",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),-146.45,RotMatNum);
- Node->SetLineColor(kColorTOF);
- fNodes->Add(Node);
- } // Holes for RICH detector
-
-if (NodeNum !=1 && NodeNum !=2 && NodeNum !=18)
- {
- Top->cd();
- Node = new TNode(NodeName4,NodeName4,"S_TOF_A",rTof*TMath::Cos(ang),rTof*TMath::Sin(ang),0.,RotMatNum);
- Node->SetLineColor(kColorTOF);
- fNodes->Add(Node);
- } // Holes for RICH detector, central part
+ fStripLn*0.5,khTof*0.5,fZlenA*0.5);
+
+ for (Int_t nodeNum=1;nodeNum<19;nodeNum++){
+
+ if (nodeNum<10) {
+ sprintf(rotMatNum,"rot50%i",nodeNum);
+ sprintf(nodeName0,"FTO00%i",nodeNum);
+ sprintf(nodeName1,"FTO10%i",nodeNum);
+ sprintf(nodeName2,"FTO20%i",nodeNum);
+ sprintf(nodeName3,"FTO30%i",nodeNum);
+ sprintf(nodeName4,"FTO40%i",nodeNum);
+ }
+ if (nodeNum>9) {
+ sprintf(rotMatNum,"rot5%i",nodeNum);
+ sprintf(nodeName0,"FTO0%i",nodeNum);
+ sprintf(nodeName1,"FTO1%i",nodeNum);
+ sprintf(nodeName2,"FTO2%i",nodeNum);
+ sprintf(nodeName3,"FTO3%i",nodeNum);
+ sprintf(nodeName4,"FTO4%i",nodeNum);
+ }
+
+ new TRotMatrix(rotMatNum,rotMatNum,90,-20*nodeNum,90,90-20*nodeNum,0,0);
+ ang = (4.5-nodeNum) * kangle;
+
+ top->cd();
+ node = new TNode(nodeName0,nodeName0,"S_TOF_C",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),zOffsetC,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+
+ top->cd();
+ node = new TNode(nodeName1,nodeName1,"S_TOF_C",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),-zOffsetC,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+ if (nodeNum !=1 && nodeNum!=17 && nodeNum !=18)
+ {
+ top->cd();
+ node = new TNode(nodeName2,nodeName2,"S_TOF_B",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),zOffsetB,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+
+ top->cd();
+ node = new TNode(nodeName3,nodeName3,"S_TOF_B",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),-zOffsetB,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+ } // Holes for HMPID detector
+
+ if (nodeNum !=1 && nodeNum !=17 && nodeNum !=18)
+ {
+ top->cd();
+ node = new TNode(nodeName4,nodeName4,"S_TOF_A",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),zOffsetA,rotMatNum);
+ node->SetLineColor(kColorTOF);
+ fNodes->Add(node);
+ } // Holes for HMPID detector, central part
}
}
@@ -225,14 +210,14 @@ void AliTOFv3::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenC,
// xFLT, yFLT, zFLT - sizes of TOF modules (large)
Float_t ycoor, zcoor;
- Float_t par[10];
+ Float_t par[3];
Int_t *idtmed = fIdtmed->GetArray()-499;
Int_t idrotm[100];
Int_t nrot = 0;
Float_t hTof = fRmax-fRmin;
- Float_t Radius = fRmin+2.;//cm
-
+ Float_t radius = fRmin+2.;//cm
+
par[0] = xtof * 0.5;
par[1] = ytof * 0.5;
par[2] = zlenC * 0.5;
@@ -241,378 +226,557 @@ void AliTOFv3::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenC,
gMC->Gsvolu("FTOB", "BOX ", idtmed[506], par, 3);
par[2] = zlenA * 0.5;
gMC->Gsvolu("FTOA", "BOX ", idtmed[506], par, 3);
-
-
-// Positioning of modules
-
- Float_t zcor1 = ztof0 - zlenC*0.5;
- Float_t zcor2 = ztof0 - zlenC - zlenB*0.5;
- Float_t zcor3 = 0.;
-
- AliMatrix(idrotm[0], 90., 0., 0., 0., 90,-90.);
- AliMatrix(idrotm[1], 90.,180., 0., 0., 90, 90.);
- gMC->Gspos("FTOC", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTOC", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
- gMC->Gspos("FTOC", 1, "BTO2", 0, zcor1, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTOC", 2, "BTO2", 0, -zcor1, 0, idrotm[1], "ONLY");
- gMC->Gspos("FTOC", 1, "BTO3", 0, zcor1, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTOC", 2, "BTO3", 0, -zcor1, 0, idrotm[1], "ONLY");
-
- gMC->Gspos("FTOB", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTOB", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
- gMC->Gspos("FTOB", 1, "BTO2", 0, zcor2, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTOB", 2, "BTO2", 0, -zcor2, 0, idrotm[1], "ONLY");
-
- gMC->Gspos("FTOA", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
- gMC->Gspos("FTOA", 0, "BTO2", 0, zcor3, 0, idrotm[0], "ONLY");
-
+
+
+ // Positioning of modules
+
+ Float_t zcor1 = ztof0 - zlenC*0.5;
+ Float_t zcor2 = ztof0 - zlenC - zlenB*0.5;
+ Float_t zcor3 = 0.;
+
+ AliMatrix(idrotm[0], 90., 0., 0., 0., 90,-90.);
+ AliMatrix(idrotm[1], 90.,180., 0., 0., 90, 90.);
+ gMC->Gspos("FTOC", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOC", 1, "BTO2", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO2", 0, -zcor1, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOC", 1, "BTO3", 0, zcor1, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOC", 2, "BTO3", 0, -zcor1, 0, idrotm[1], "ONLY");
+
+ gMC->Gspos("FTOB", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
+ gMC->Gspos("FTOB", 1, "BTO2", 0, zcor2, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOB", 2, "BTO2", 0, -zcor2, 0, idrotm[1], "ONLY");
+
+ gMC->Gspos("FTOA", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
+ gMC->Gspos("FTOA", 0, "BTO2", 0, zcor3, 0, idrotm[0], "ONLY");
+
Float_t db = 0.5;//cm
Float_t xFLT, xFST, yFLT, zFLTA, zFLTB, zFLTC;
-
+
xFLT = fStripLn;
yFLT = ytof;
zFLTA = zlenA;
zFLTB = zlenB;
zFLTC = zlenC;
-
+
xFST = xFLT-fDeadBndX*2;//cm
-
-// Sizes of MRPC pads
-
+
+ // Sizes of MRPC pads
+
Float_t yPad = 0.505;//cm
-// Large not sensitive volumes with CO2
+ // Large not sensitive volumes with Insensitive Freon
par[0] = xFLT*0.5;
par[1] = yFLT*0.5;
-
- cout <<"************************* TOF geometry **************************"<Gsvolu("FLTA", "BOX ", idtmed[506], par, 3); // CO2
+ gMC->Gsvolu("FLTA", "BOX ", idtmed[512], par, 3); // Insensitive Freon
gMC->Gspos ("FLTA", 0, "FTOA", 0., 0., 0., 0, "ONLY");
-
+
par[2] = (zFLTB * 0.5);
- gMC->Gsvolu("FLTB", "BOX ", idtmed[506], par, 3); // CO2
+ gMC->Gsvolu("FLTB", "BOX ", idtmed[512], par, 3); // Insensitive Freon
gMC->Gspos ("FLTB", 0, "FTOB", 0., 0., 0., 0, "ONLY");
-
- par[2] = (zFLTC * 0.5);
- gMC->Gsvolu("FLTC", "BOX ", idtmed[506], par, 3); // CO2
+
+ par[2] = (zFLTC * 0.5);
+ gMC->Gsvolu("FLTC", "BOX ", idtmed[512], par, 3); // Insensitive Freon
gMC->Gspos ("FLTC", 0, "FTOC", 0., 0., 0., 0, "ONLY");
-////////// Layers before detector ////////////////////
-
-// MYlar layer in front 1.0 mm thick at the beginning
- par[0] = -1;
- par[1] = 0.1;//cm
- par[2] = -1;
+ ///// Layers of Aluminum before and after detector /////
+ ///// Aluminum Box for Modules (1.8 mm thickness) /////
+ ///// lateral walls not simulated for the time being
+ //const Float_t khAlWall = 0.18;
+ // fp to be checked
+ const Float_t khAlWall = 0.11;
+ par[0] = xFLT*0.5;
+ par[1] = khAlWall/2.;//cm
ycoor = -yFLT/2 + par[1];
- gMC->Gsvolu("FMYA", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos ("FMYA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FMYB", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos ("FMYB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FMYC", "BOX ", idtmed[508], par, 3); // Alluminium
- gMC->Gspos ("FMYC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
-
-// honeycomb (special Polyethilene Layer of 1cm)
- ycoor = ycoor + par[1];
- par[0] = -1;
- par[1] = 0.5;//cm
- par[2] = -1;
- ycoor = ycoor + par[1];
- gMC->Gsvolu("FPLA", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos ("FPLA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPLB", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos ("FPLB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPLC", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos ("FPLC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
-
-///////////////// Detector itself //////////////////////
-
- const Float_t DeadBound = fDeadBndZ; //cm non-sensitive between the pad edge
- //and the boundary of the strip
- const Int_t nx = fNpadX; // number of pads along x
- const Int_t nz = fNpadZ; // number of pads along z
- const Float_t Space = fSpace; //cm distance from the front plate of the box
-
+ par[2] = (zFLTA *0.5);
+ gMC->Gsvolu("FALA", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FALA", 1, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gspos ("FALA", 2, "FLTA", 0.,-ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FALB", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FALB", 1, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gspos ("FALB", 2, "FLTB", 0.,-ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FALC", "BOX ", idtmed[508], par, 3); // Alluminium
+ gMC->Gspos ("FALC", 1, "FLTC", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gspos ("FALC", 2, "FLTC", 0.,-ycoor, 0., 0, "ONLY");
+
+ ///////////////// Detector itself //////////////////////
+
+ const Float_t kdeadBound = fDeadBndZ; //cm non-sensitive between the pad edge
+ //and the boundary of the strip
+ const Int_t knx = fNpadX; // number of pads along x
+ const Int_t knz = fNpadZ; // number of pads along z
+ const Float_t kspace = fSpace; //cm distance from the front plate of the box
+
Float_t zSenStrip = fZpad*fNpadZ;//cm
- Float_t StripWidth = zSenStrip + 2*DeadBound;
-
+ Float_t stripWidth = zSenStrip + 2*kdeadBound;
+
par[0] = xFLT*0.5;
- par[1] = yPad*0.5;
- par[2] = StripWidth*0.5;
-
- // glass layer of detector STRip
- gMC->Gsvolu("FSTR","BOX",idtmed[514],par,3);
-
- // Non-Sesitive Freon boundaries
- par[0] = xFLT*0.5;
- par[1] = 0.110*0.5;//cm
- par[2] = -1;
- gMC->Gsvolu("FNSF","BOX",idtmed[512],par,3);
- gMC->Gspos ("FNSF",0,"FSTR",0.,0.,0.,0,"ONLY");
-
- // MYlar for Internal non-sesitive boundaries
-// par[1] = 0.025;//cm
-// gMC->Gsvolu("FMYI","BOX",idtmed[510],par,3);
-// gMC->Gspos ("FMYI",0,"FNSF",0.,0.,0.,0,"MANY");
-
- // MYlar eXternal layers
- par[1] = 0.035*0.5;//cm
- ycoor = -yPad*0.5+par[1];
- gMC->Gsvolu("FMYX","BOX",idtmed[510],par,3);
- gMC->Gspos ("FMYX",1,"FSTR",0.,ycoor,0.,0,"ONLY");
- gMC->Gspos ("FMYX",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
- ycoor += par[1];
-
- // GRaphyte Layers
- par[1] = 0.003*0.5;
- ycoor += par[1];
- gMC->Gsvolu("FGRL","BOX",idtmed[502],par,3);
- gMC->Gspos ("FGRL",1,"FSTR",0.,ycoor,0.,0,"ONLY");
- gMC->Gspos ("FGRL",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
-
- // freon sensitive layer (Chlorine-Fluorine-Carbon)
- par[0] = xFST*0.5;
- par[1] = 0.110*0.5;
- par[2] = zSenStrip*0.5;
- gMC->Gsvolu("FCFC","BOX",idtmed[513],par,3);
- gMC->Gspos ("FCFC",0,"FNSF",0.,0.,0.,0,"ONLY");
-
- // Pad definition x & z
- gMC->Gsdvn("FLZ","FCFC", nz, 3);
- gMC->Gsdvn("FLX","FLZ" , nx, 1);
-
- // MRPC PAD itself
- par[0] = -1;
- par[1] = -1;
- par[2] = -1;
- gMC->Gsvolu("FPAD", "BOX ", idtmed[513], par, 3);
- gMC->Gspos ("FPAD", 0, "FLX", 0., 0., 0., 0, "ONLY");
-
-//// Positioning the Strips (FSTR) in the FLT volumes /////
-
+ par[1] = yPad*0.5;
+ par[2] = stripWidth*0.5;
+
+ // new description for strip volume -double stack strip-
+ // -- all constants are expressed in cm
+ // heigth of different layers
+ const Float_t khhony = 0.8 ; // heigth of HONY Layer
+ const Float_t khpcby = 0.08 ; // heigth of PCB Layer
+ const Float_t khmyly = 0.035 ; // heigth of MYLAR Layer
+ const Float_t khgraphy = 0.02 ; // heigth of GRAPHITE Layer
+ const Float_t khglasseiy = 0.135; // 0.6 Ext. Glass + 1.1 i.e. (Int. Glass/2) (mm)
+ const Float_t khsensmy = 0.11 ; // heigth of Sensitive Freon Mixture
+ const Float_t kwsensmz = 2*3.5 ; // cm
+ const Float_t klsensmx = 48*2.5; // cm
+ const Float_t kwpadz = 3.5; // cm z dimension of the FPAD volume
+ const Float_t klpadx = 2.5; // cm x dimension of the FPAD volume
+
+ // heigth of the FSTR Volume (the strip volume)
+ const Float_t khstripy = 2*khhony+3*khpcby+4*(khmyly+khgraphy+khglasseiy)+2*khsensmy;
+ // width of the FSTR Volume (the strip volume)
+ const Float_t kwstripz = 10.;
+ // length of the FSTR Volume (the strip volume)
+ const Float_t klstripx = 122.;
+
+ Float_t parfp[3]={klstripx*0.5,khstripy*0.5,kwstripz*0.5};
+ // coordinates of the strip center in the strip reference frame; used for positioning
+ // internal strip volumes
+ Float_t posfp[3]={0.,0.,0.};
+
+
+ // FSTR volume definition and filling this volume with non sensitive Gas Mixture
+ gMC->Gsvolu("FSTR","BOX",idtmed[512],parfp,3);
+ //-- HONY Layer definition
+ // parfp[0] = -1;
+ parfp[1] = khhony*0.5;
+ // parfp[2] = -1;
+ gMC->Gsvolu("FHON","BOX",idtmed[503],parfp,3);
+ // positioning 2 HONY Layers on FSTR volume
+
+ posfp[1]=-khstripy*0.5+parfp[1];
+ gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+ //-- PCB Layer definition
+ parfp[1] = khpcby*0.5;
+ gMC->Gsvolu("FPCB","BOX",idtmed[504],parfp,3);
+ // positioning 2 PCB Layers on FSTR volume
+ posfp[1]=-khstripy*0.5+khhony+parfp[1];
+ gMC->Gspos("FPCB",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FPCB",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ // positioning the central PCB layer
+ gMC->Gspos("FPCB",3,"FSTR",0.,0.,0.,0,"ONLY");
+
+
+
+ //-- MYLAR Layer definition
+ parfp[1] = khmyly*0.5;
+ gMC->Gsvolu("FMYL","BOX",idtmed[511],parfp,3);
+ // positioning 2 MYLAR Layers on FSTR volume
+ posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1];
+ gMC->Gspos("FMYL",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FMYL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ // adding further 2 MYLAR Layers on FSTR volume
+ posfp[1] = khpcby*0.5+parfp[1];
+ gMC->Gspos("FMYL",3,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FMYL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+
+ //-- Graphite Layer definition
+ parfp[1] = khgraphy*0.5;
+ gMC->Gsvolu("FGRP","BOX",idtmed[502],parfp,3);
+ // positioning 2 Graphite Layers on FSTR volume
+ posfp[1] = -khstripy*0.5+khhony+khpcby+khmyly+parfp[1];
+ gMC->Gspos("FGRP",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FGRP",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ // adding further 2 Graphite Layers on FSTR volume
+ posfp[1] = khpcby*0.5+khmyly+parfp[1];
+ gMC->Gspos("FGRP",3,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FGRP",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+
+ //-- Glass (EXT. +Semi INT.) Layer definition
+ parfp[1] = khglasseiy*0.5;
+ gMC->Gsvolu("FGLA","BOX",idtmed[514],parfp,3);
+ // positioning 2 Glass Layers on FSTR volume
+ posfp[1] = -khstripy*0.5+khhony+khpcby+khmyly+khgraphy+parfp[1];
+ gMC->Gspos("FGLA",1,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FGLA",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+ // adding further 2 Glass Layers on FSTR volume
+ posfp[1] = khpcby*0.5+khmyly+khgraphy+parfp[1];
+ gMC->Gspos("FGLA",3,"FSTR",0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FGLA",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
+
+
+ //-- Sensitive Mixture Layer definition
+ parfp[0] = klsensmx*0.5;
+ parfp[1] = khsensmy*0.5;
+ parfp[2] = kwsensmz*0.5;
+ gMC->Gsvolu("FSEN","BOX",idtmed[513],parfp,3);
+ gMC->Gsvolu("FNSE","BOX",idtmed[512],parfp,3);
+ // positioning 2 gas Layers on FSTR volume
+ // the upper is insensitive freon
+ // while the remaining is sensitive
+ posfp[1] = khpcby*0.5+khmyly+khgraphy+khglasseiy+parfp[1];
+ gMC->Gspos("FNSE",0,"FSTR", 0., posfp[1],0.,0,"ONLY");
+ gMC->Gspos("FSEN",0,"FSTR", 0.,-posfp[1],0.,0,"ONLY");
+
+ // dividing FSEN along z in knz=2 and along x in knx=48
+ gMC->Gsdvn("FSEZ","FSEN",knz,3);
+ gMC->Gsdvn("FSEX","FSEZ",knx,1);
+
+ // FPAD volume definition
+ parfp[0] = klpadx*0.5;
+ parfp[1] = khsensmy*0.5;
+ parfp[2] = kwpadz*0.5;
+ gMC->Gsvolu("FPAD","BOX",idtmed[513],parfp,3);
+ // positioning the FPAD volumes on previous divisions
+ gMC->Gspos("FPAD",0,"FSEX",0.,0.,0.,0,"ONLY");
+
+ //// Positioning the Strips (FSTR) in the FLT volumes /////
+
// Plate A (Central)
Float_t t = zFLTC+zFLTB+zFLTA*0.5+ 2*db;//Half Width of Barrel
-
- Float_t Gap = fGapA; //cm distance between the strip axis
+
+ Float_t gap = fGapA+0.5; //cm updated distance between the strip axis
Float_t zpos = 0;
Float_t ang = 0;
- Int_t i=1,j=1;
+ Int_t j=1; // AdC
nrot = 0;
zcoor = 0;
- ycoor = -14.5 + Space ; //2 cm over front plate
+ ycoor = -14.5 + kspace ; //2 cm over front plate
- AliMatrix (idrotm[0], 90., 0.,90.,90.,0., 90.);
- gMC->Gspos("FSTR",j,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY");
+ AliMatrix (idrotm[0], 90., 0.,90.,90.,0., 90.);
- printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
- printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ Int_t centerLoc= (Int_t)(fNStripA/2.) + 1; // AdC
+ //gMC->Gspos("FSTR",j,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY");
+ gMC->Gspos("FSTR",centerLoc,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY"); // AdC
+ if(fDebug>=1) {
+ printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,j); // AdC
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
zcoor -= zSenStrip;
- j++;
- Int_t UpDown = -1; // UpDown=-1 -> Upper strip
- // UpDown=+1 -> Lower strip
+ //j++; // AdC
+ Int_t upDown = -1; // upDown=-1 -> Upper strip
+ // upDown=+1 -> Lower strip
do{
- ang = atan(zcoor/Radius);
- ang *= kRaddeg;
- AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
- AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
- ang /= kRaddeg;
- ycoor = -14.5+ Space; //2 cm over front plate
- ycoor += (1-(UpDown+1)/2)*Gap;
- gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
- gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
-
- printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
- printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
-
- j += 2;
- UpDown*= -1; // Alternate strips
- zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
- UpDown*Gap*TMath::Tan(ang)-
- (zSenStrip/2)/TMath::Cos(ang);
- } while (zcoor-(StripWidth/2)*TMath::Cos(ang)>-t+zFLTC+zFLTB+db*2);
+ ang = atan(zcoor/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
+ AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
+ ang /= kRaddeg;
+ ycoor = -14.5+ kspace; //2 cm over front plate
+ ycoor += (1-(upDown+1)/2)*gap;
+ //gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
+ //gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
+ gMC->Gspos("FSTR",centerLoc-j,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY"); // AdC
+ gMC->Gspos("FSTR",centerLoc+j,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY"); // AdC
+ if(fDebug>=1) {
+ printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,j); // AdC
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ j++; //j += 2; // AdC
+ upDown*= -1; // Alternate strips
+ zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
+ upDown*gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+ } while (zcoor-(stripWidth/2)*TMath::Cos(ang)>-t+zFLTC+zFLTB+db*2);
zcoor = zcoor+(zSenStrip/2)/TMath::Cos(ang)+
- UpDown*Gap*TMath::Tan(ang)+
- (zSenStrip/2)/TMath::Cos(ang);
-
- Gap = fGapB;
+ upDown*gap*TMath::Tan(ang)+
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ gap = fGapB;
zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
- UpDown*Gap*TMath::Tan(ang)-
- (zSenStrip/2)/TMath::Cos(ang);
-
- ang = atan(zcoor/Radius);
+ upDown*gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+
+ ang = atan(zcoor/radius);
ang *= kRaddeg;
- AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
+ AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
ang /= kRaddeg;
-
- ycoor = -14.5+ Space; //2 cm over front plate
- ycoor += (1-(UpDown+1)/2)*Gap;
- gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
- gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
-
- printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
- printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
-
- ycoor = -hTof/2.+ Space;//2 cm over front plate
-
+
+ ycoor = -14.5+ kspace; //2 cm over front plate
+ ycoor += (1-(upDown+1)/2)*gap;
+ //gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
+ //gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
+ gMC->Gspos("FSTR",centerLoc-j,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY"); // AdC
+ gMC->Gspos("FSTR",centerLoc+j,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY"); // AdC
+ if(fDebug>=1) {
+ printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,j); // AdC
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ ycoor = -hTof/2.+ kspace;//2 cm over front plate
+
// Plate B
-
+
nrot = 0;
- i=1;
- UpDown = 1;
- Float_t DeadRegion = 1.0;//cm
+ Int_t i=1; // AdC
+ upDown = 1;
+ Float_t deadRegion = 1.0;//cm
zpos = zcoor - (zSenStrip/2)/TMath::Cos(ang)-
- UpDown*Gap*TMath::Tan(ang)-
- (zSenStrip/2)/TMath::Cos(ang)-
- DeadRegion/TMath::Cos(ang);
-
- ang = atan(zpos/Radius);
+ upDown*gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang)-
+ deadRegion/TMath::Cos(ang);
+
+ ang = atan(zpos/radius);
ang *= kRaddeg;
AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
ang /= kRaddeg;
- ycoor = -hTof*0.5+ Space ; //2 cm over front plate
- ycoor += (1-(UpDown+1)/2)*Gap;
+ ycoor = -hTof*0.5+ kspace ; //2 cm over front plate
+ ycoor += (1-(upDown+1)/2)*gap;
zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
-
- printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
- printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
-
+ if(fDebug>=1) {
+ printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
i++;
- UpDown*=-1;
-
+ upDown*=-1;
+
do {
- zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)-
- UpDown*Gap*TMath::Tan(ang)-
- (zSenStrip/2)/TMath::Cos(ang);
- ang = atan(zpos/Radius);
- ang *= kRaddeg;
- AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
- ang /= kRaddeg;
- ycoor = -hTof*0.5+ Space ; //2 cm over front plate
- ycoor += (1-(UpDown+1)/2)*Gap;
- zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
- gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
-
- printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
- printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
-
- UpDown*=-1;
- i++;
+ zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)-
+ upDown*gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+ ang = atan(zpos/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ Float_t deltaSpaceinB=-0.5; // [cm] to avoid overlaps with the end of freon frame
+ Float_t deltaGapinB=0.5; // [cm] to avoid overlaps in between initial strips
+ ycoor = -hTof*0.5+ kspace+deltaSpaceinB ; //2 cm over front plate
+ ycoor += (1-(upDown+1)/2)*(gap+deltaGapinB);
+ zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+ if(fDebug>=1) {
+ printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ upDown*=-1;
+ i++;
} while (TMath::Abs(ang*kRaddeg)<22.5);
//till we reach a tilting angle of 22.5 degrees
-
- ycoor = -hTof*0.5+ Space ; //2 cm over front plate
+
+ ycoor = -hTof*0.5+ kspace ; //2 cm over front plate
zpos = zpos - zSenStrip/TMath::Cos(ang);
-
+ // this avoid overlaps in between outer strips in plate B
+ Float_t deltaMovingUp=0.8; // [cm]
+ Float_t deltaMovingDown=-0.5; // [cm]
+
do {
- ang = atan(zpos/Radius);
- ang *= kRaddeg;
- AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
- ang /= kRaddeg;
- zcoor = zpos+(zFLTB/2+zFLTA/2+db);
- gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
- zpos = zpos - zSenStrip/TMath::Cos(ang);
- printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
- printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
- i++;
-
- } while (zpos-StripWidth*0.5/TMath::Cos(ang)>-t+zFLTC+db);
-
+ ang = atan(zpos/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ zcoor = zpos+(zFLTB/2+zFLTA/2+db);
+ gMC->Gspos("FSTR",i, "FLTB", 0., ycoor+deltaMovingDown+deltaMovingUp, zcoor,idrotm[nrot], "ONLY");
+ deltaMovingUp+=0.8; // update delta moving toward the end of the plate
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+ if(fDebug>=1) {
+ printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ i++;
+
+ } while (zpos-stripWidth*0.5/TMath::Cos(ang)>-t+zFLTC+db);
+
// Plate C
zpos = zpos + zSenStrip/TMath::Cos(ang);
-
+
zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)+
- Gap*TMath::Tan(ang)-
- (zSenStrip/2)/TMath::Cos(ang);
-
+ gap*TMath::Tan(ang)-
+ (zSenStrip/2)/TMath::Cos(ang);
+
nrot = 0;
i=0;
- ycoor= -hTof*0.5+Space+Gap;
-
+ Float_t deltaGap=-2.5; // [cm] update distance from strip center and plate
+ ycoor= -hTof*0.5+kspace+gap+deltaGap;
+
do {
- i++;
- ang = atan(zpos/Radius);
- ang *= kRaddeg;
- AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
- ang /= kRaddeg;
- zcoor = zpos+(zFLTC*0.5+zFLTB+zFLTA*0.5+db*2);
- gMC->Gspos("FSTR",i, "FLTC", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
-
- printf("%f, St. %2i, Pl.5 ",ang*kRaddeg,i);
- printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
-
- zpos = zpos - zSenStrip/TMath::Cos(ang);
- } while (zpos-StripWidth*TMath::Cos(ang)*0.5>-t);
-
-
-////////// Layers after detector /////////////////
-
-// honeycomb (Polyethilene) Layer after (3cm)
+ i++;
+ ang = atan(zpos/radius);
+ ang *= kRaddeg;
+ AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
+ ang /= kRaddeg;
+ zcoor = zpos+(zFLTC*0.5+zFLTB+zFLTA*0.5+db*2);
+ gMC->Gspos("FSTR",i, "FLTC", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
+ if(fDebug>=1) {
+ printf("%s: %f, St. %2i, Pl.5 ",ClassName(),ang*kRaddeg,i);
+ printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
+ }
+ zpos = zpos - zSenStrip/TMath::Cos(ang);
+ } while (zpos-stripWidth*TMath::Cos(ang)*0.5>-t);
- Float_t OverSpace = fOverSpc;//cm
- par[0] = -1;
- par[1] = 0.6;
- par[2] = -1;
- ycoor = -yFLT/2 + OverSpace + par[1];
- gMC->Gsvolu("FPEA", "BOX ", idtmed[503], par, 3); // Hony
+ ////////// Layers after strips /////////////////
+ // Al Layer thickness (2.3mm) factor 0.7
+
+ Float_t overSpace = fOverSpc;//cm
+
+ par[0] = xFLT*0.5;
+ par[1] = 0.115*0.7; // factor 0.7
+ par[2] = (zFLTA *0.5);
+ ycoor = -yFLT/2 + overSpace + par[1];
+ gMC->Gsvolu("FPEA", "BOX ", idtmed[508], par, 3); // Al
gMC->Gspos ("FPEA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPEB", "BOX ", idtmed[503], par, 3); // Hony
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FPEB", "BOX ", idtmed[508], par, 3); // Al
gMC->Gspos ("FPEB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FPEC", "BOX ", idtmed[503], par, 3); // Hony
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FPEC", "BOX ", idtmed[508], par, 3); // Al
gMC->Gspos ("FPEC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
-// Electronics (Cu) after
+
+ // plexiglass thickness: 1.5 mm ; factor 0.3
ycoor += par[1];
- par[0] = -1;
- par[1] = 1.43*0.05*0.5; // 5% of X0
- par[2] = -1;
+ par[0] = xFLT*0.5;
+ par[1] = 0.075*0.3; // factor 0.3
+ par[2] = (zFLTA *0.5);
ycoor += par[1];
- gMC->Gsvolu("FECA", "BOX ", idtmed[501], par, 3); // Cu
+ gMC->Gsvolu("FECA", "BOX ", idtmed[505], par, 3); // Plexigl.
gMC->Gspos ("FECA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FECB", "BOX ", idtmed[501], par, 3); // Cu
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FECB", "BOX ", idtmed[505], par, 3); // Plexigl.
gMC->Gspos ("FECB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FECC", "BOX ", idtmed[501], par, 3); // Cu
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FECC", "BOX ", idtmed[505], par, 3); // Plexigl.
gMC->Gspos ("FECC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
-
-// cooling WAter after
+
+ // frame of Air
ycoor += par[1];
- par[0] = -1;
- par[1] = 36.1*0.02*0.5; // 2% of X0
- par[2] = -1;
+ par[0] = xFLT*0.5;
+ par[1] = (yFLT/2-ycoor-khAlWall)*0.5; // Aluminum layer considered (0.18 cm)
+ par[2] = (zFLTA *0.5);
ycoor += par[1];
- gMC->Gsvolu("FWAA", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos ("FWAA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FWAB", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos ("FWAB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FWAC", "BOX ", idtmed[515], par, 3); // Water
- gMC->Gspos ("FWAC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
-
-//Back Plate honycomb (2cm)
- par[0] = -1;
- par[1] = 2 *0.5;
- par[2] = -1;
- ycoor = yFLT/2 - par[1];
- gMC->Gsvolu("FBPA", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos ("FBPA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FBPB", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos ("FBPB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
- gMC->Gsvolu("FBPC", "BOX ", idtmed[503], par, 3); // Hony
- gMC->Gspos ("FBPC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+ gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air
+ gMC->Gspos ("FAIA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTB *0.5);
+ gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air
+ gMC->Gspos ("FAIB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
+ par[2] = (zFLTC *0.5);
+ gMC->Gsvolu("FAIC", "BOX ", idtmed[500], par, 3); // Air
+ gMC->Gspos ("FAIC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
+
+
+ // start with cards and cooling tubes
+ // finally, cards, cooling tubes and layer for thermal dispersion
+ // 3 volumes
+ // card volume definition
+
+ // see GEOM200 in GEANT manual
+ AliMatrix(idrotm[98], 90., 0., 90., 90., 0., 0.); // 0 deg
+
+ Float_t cardpar[3];
+ cardpar[0]= 61.;
+ cardpar[1]= 5.;
+ cardpar[2]= 0.1;
+ gMC->Gsvolu("FCAR", "BOX ", idtmed[504], cardpar, 3); // PCB Card
+ //alu plate volume definition
+ cardpar[1]= 3.5;
+ cardpar[2]= 0.05;
+ gMC->Gsvolu("FALP", "BOX ", idtmed[508], cardpar, 3); // Alu Plate
+
+
+ // central module positioning (FAIA)
+ Float_t cardpos[3], aplpos2, stepforcardA=6.625;
+ cardpos[0]= 0.;
+ cardpos[1]= -0.5;
+ cardpos[2]= -53.;
+ Float_t aplpos1 = -2.;
+ Int_t icard;
+ for (icard=0; icard<15; ++icard) {
+ cardpos[2]= cardpos[2]+stepforcardA;
+ aplpos2 = cardpos[2]+0.15;
+ gMC->Gspos("FCAR",icard,"FAIA",cardpos[0],cardpos[1],cardpos[2],idrotm[98],"ONLY");
+ gMC->Gspos("FALP",icard,"FAIA",cardpos[0],aplpos1,aplpos2,idrotm[98],"ONLY");
+
+ }
+
+
+ // intermediate module positioning (FAIB)
+ Float_t stepforcardB= 7.05;
+ cardpos[2]= -70.5;
+ for (icard=0; icard<19; ++icard) {
+ cardpos[2]= cardpos[2]+stepforcardB;
+ aplpos2 = cardpos[2]+0.15;
+ gMC->Gspos("FCAR",icard,"FAIB",cardpos[0],cardpos[1],cardpos[2],idrotm[98],"ONLY");
+ gMC->Gspos("FALP",icard,"FAIB",cardpos[0],aplpos1,aplpos2,idrotm[98],"ONLY");
+ }
+
+
+ // outer module positioning (FAIC)
+ Float_t stepforcardC= 8.45238;
+ cardpos[2]= -88.75;
+ for (icard=0; icard<20; ++icard) {
+ cardpos[2]= cardpos[2]+stepforcardC;
+ aplpos2 = cardpos[2]+0.15;
+ gMC->Gspos("FCAR",icard,"FAIC",cardpos[0],cardpos[1],cardpos[2],idrotm[98],"ONLY");
+ gMC->Gspos("FALP",icard,"FAIC",cardpos[0],aplpos1,aplpos2,idrotm[98],"ONLY");
+ }
+
+ // tube volume definition
+ Float_t tubepar[3];
+ tubepar[0]= 0.;
+ tubepar[1]= 0.4;
+ tubepar[2]= 61.;
+ gMC->Gsvolu("FTUB", "TUBE", idtmed[516], tubepar, 3); // cooling tubes (steel)
+ tubepar[0]= 0.;
+ tubepar[1]= 0.35;
+ tubepar[2]= 61.;
+ gMC->Gsvolu("FITU", "TUBE", idtmed[515], tubepar, 3); // cooling water
+ // positioning water tube into the steel one
+ gMC->Gspos("FITU",1,"FTUB",0.,0.,0.,0,"ONLY");
+
+
+ // rotation matrix
+ AliMatrix(idrotm[99], 180., 90., 90., 90., 90., 0.);
+ // central module positioning (FAIA)
+ Float_t tubepos[3], tdis=0.6;
+ tubepos[0]= 0.;
+ tubepos[1]= cardpos[1];
+ tubepos[2]= -53.+tdis;
+ // tub1pos = 5.;
+ Int_t itub;
+ for (itub=0; itub<15; ++itub) {
+ tubepos[2]= tubepos[2]+stepforcardA;
+ gMC->Gspos("FTUB",itub,"FAIA",tubepos[0],tubepos[1],tubepos[2],idrotm[99],
+ "ONLY");
+ }
+
+
+ // intermediate module positioning (FAIB)
+ tubepos[2]= -70.5+tdis;
+ for (itub=0; itub<19; ++itub) {
+ tubepos[2]= tubepos[2]+stepforcardB;
+ gMC->Gspos("FTUB",itub,"FAIB",tubepos[0],tubepos[1],tubepos[2],idrotm[99],
+ "ONLY");
+ }
+
+ // outer module positioning (FAIC)
+ tubepos[2]= -88.75+tdis;
+ for (itub=0; itub<20; ++itub) {
+ tubepos[2]= tubepos[2]+stepforcardC;
+ gMC->Gspos("FTUB",itub,"FAIC",tubepos[0],tubepos[1],tubepos[2],idrotm[99],
+ "ONLY");
+ }
+
}
//_____________________________________________________________________________
-void AliTOFv3::DrawModule()
+void AliTOFv3::DrawModule() const
{
//
- // Draw a shaded view of the Time Of Flight version 1
+ // Draw a shaded view of the Time Of Flight version 3
//
// Set everything unseen
gMC->Gsatt("*", "seen", -1);
@@ -656,6 +820,191 @@ void AliTOFv3::DrawModule()
gMC->Gdman(18, 4, "MAN");
gMC->Gdopt("hide","off");
}
+//_____________________________________________________________________________
+void AliTOFv3::DrawDetectorModules()
+{
+//
+// Draw a shaded view of the TOF detector version 3
+//
+
+//Set ALIC mother transparent
+ gMC->Gsatt("ALIC","SEEN",0);
+
+//
+//Set volumes visible
+//
+//=====> Level 1
+ // Level 1 for TOF volumes
+ gMC->Gsatt("B077","seen",0);
+
+
+//==========> Level 2
+ // Level 2
+ gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
+ gMC->Gsatt("B071","seen",0);
+ gMC->Gsatt("B074","seen",0);
+ gMC->Gsatt("B075","seen",0);
+ gMC->Gsatt("B080","seen",0); // B080 does not has sub-level
+
+
+ // Level 2 of B071
+ gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
+ gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
+ gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
+ gMC->Gsatt("B069","seen",-1); // all B069 sub-levels skipped -
+ gMC->Gsatt("B056","seen",0); // B056 does not has sub-levels -
+ gMC->Gsatt("B059","seen",-1); // all B059 sub-levels skipped -
+ gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
+ gMC->Gsatt("BTR1","seen",0); // BTR1 do not have sub-levels -
+ gMC->Gsatt("BTO1","seen",0);
+
+
+ // Level 2 of B074
+ gMC->Gsatt("BTR2","seen",0); // BTR2 does not has sub-levels -
+ gMC->Gsatt("BTO2","seen",0);
+
+ // Level 2 of B075
+ gMC->Gsatt("BTR3","seen",0); // BTR3 do not have sub-levels -
+ gMC->Gsatt("BTO3","seen",0);
+
+// ==================> Level 3
+ // Level 3 of B071 / Level 2 of BTO1
+ gMC->Gsatt("FTOC","seen",-2);
+ gMC->Gsatt("FTOB","seen",-2);
+ gMC->Gsatt("FTOA","seen",-2);
+
+ // Level 3 of B074 / Level 2 of BTO2
+ // -> cfr previous settings
+
+ // Level 3 of B075 / Level 2 of BTO3
+ // -> cfr previous settings
+
+ gMC->Gdopt("hide","on");
+ gMC->Gdopt("shad","on");
+ gMC->Gsatt("*", "fill", 5);
+ gMC->SetClipBox(".");
+ gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000);
+ gMC->DefaultRange();
+ gMC->Gdraw("alic", 45, 40, 0, 10, 10, .015, .015);
+ gMC->Gdhead(1111,"TOF detector V1");
+ gMC->Gdman(18, 4, "MAN");
+ gMC->Gdopt("hide","off");
+}
+
+//_____________________________________________________________________________
+void AliTOFv3::DrawDetectorStrips()
+{
+//
+// Draw a shaded view of the TOF strips for version 3
+//
+
+//Set ALIC mother transparent
+ gMC->Gsatt("ALIC","SEEN",0);
+
+//
+//Set volumes visible
+//=====> Level 1
+ // Level 1 for TOF volumes
+ gMC->Gsatt("B077","seen",0);
+
+//==========> Level 2
+ // Level 2
+ gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
+ gMC->Gsatt("B071","seen",0);
+ gMC->Gsatt("B074","seen",0);
+ gMC->Gsatt("B075","seen",0);
+ gMC->Gsatt("B080","seen",0); // B080 does not has sub-level
+
+ // Level 2 of B071
+ gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
+ gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
+ gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
+ gMC->Gsatt("B069","seen",-1); // all B069 sub-levels skipped -
+ gMC->Gsatt("B056","seen",0); // B056 does not has sub-levels -
+ gMC->Gsatt("B059","seen",-1); // all B059 sub-levels skipped -
+ gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
+ gMC->Gsatt("BTR1","seen",0); // BTR1 do not have sub-levels -
+ gMC->Gsatt("BTO1","seen",0);
+
+// ==================> Level 3
+ // Level 3 of B071 / Level 2 of BTO1
+ gMC->Gsatt("FTOC","seen",0);
+ gMC->Gsatt("FTOB","seen",0);
+ gMC->Gsatt("FTOA","seen",0);
+
+ // Level 3 of B074 / Level 2 of BTO2
+ // -> cfr previous settings
+
+ // Level 3 of B075 / Level 2 of BTO3
+ // -> cfr previous settings
+
+
+// ==========================> Level 4
+ // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOC
+ gMC->Gsatt("FLTC","seen",0);
+ // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOB
+ gMC->Gsatt("FLTB","seen",0);
+ // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOA
+ gMC->Gsatt("FLTA","seen",0);
+
+ // Level 4 of B074 / Level 3 of BTO2 / Level 2 of FTOC
+ // -> cfr previous settings
+ // Level 4 of B074 / Level 3 of BTO2 / Level 2 of FTOB
+ // -> cfr previous settings
+
+ // Level 4 of B075 / Level 3 of BTO3 / Level 2 of FTOC
+ // -> cfr previous settings
+
+//======================================> Level 5
+ // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOC / Level 2 of FLTC
+ gMC->Gsatt("FALC","seen",0); // no children for FALC
+ gMC->Gsatt("FSTR","seen",-2);
+ gMC->Gsatt("FPEC","seen",0); // no children for FPEC
+ gMC->Gsatt("FECC","seen",0); // no children for FECC
+ gMC->Gsatt("FWAC","seen",0); // no children for FWAC
+ gMC->Gsatt("FAIC","seen",0); // no children for FAIC
+
+ // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOB / Level 2 of FLTB
+ gMC->Gsatt("FALB","seen",0); // no children for FALB
+//--> gMC->Gsatt("FSTR","seen",-2);
+
+
+ // -> cfr previous settings
+ gMC->Gsatt("FPEB","seen",0); // no children for FPEB
+ gMC->Gsatt("FECB","seen",0); // no children for FECB
+ gMC->Gsatt("FWAB","seen",0); // no children for FWAB
+ gMC->Gsatt("FAIB","seen",0); // no children for FAIB
+
+ // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOA / Level 2 of FLTA
+ gMC->Gsatt("FALA","seen",0); // no children for FALB
+//--> gMC->Gsatt("FSTR","seen",-2);
+ // -> cfr previous settings
+ gMC->Gsatt("FPEA","seen",0); // no children for FPEA
+ gMC->Gsatt("FECA","seen",0); // no children for FECA
+ gMC->Gsatt("FWAA","seen",0); // no children for FWAA
+ gMC->Gsatt("FAIA","seen",0); // no children for FAIA
+
+ // Level 2 of B074
+ gMC->Gsatt("BTR2","seen",0); // BTR2 does not has sub-levels -
+ gMC->Gsatt("BTO2","seen",0);
+
+ // Level 2 of B075
+ gMC->Gsatt("BTR3","seen",0); // BTR3 do not have sub-levels -
+ gMC->Gsatt("BTO3","seen",0);
+
+// for others Level 5, cfr. previous settings
+
+ gMC->Gdopt("hide","on");
+ gMC->Gdopt("shad","on");
+ gMC->Gsatt("*", "fill", 5);
+ gMC->SetClipBox(".");
+ gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000);
+ gMC->DefaultRange();
+ gMC->Gdraw("alic", 45, 40, 0, 10, 10, .015, .015);
+ gMC->Gdhead(1111,"TOF Strips V1");
+ gMC->Gdman(18, 4, "MAN");
+ gMC->Gdopt("hide","off");
+}
//_____________________________________________________________________________
void AliTOFv3::CreateMaterials()
@@ -672,11 +1021,13 @@ void AliTOFv3::Init()
//
// Initialise the detector after the geometry has been defined
//
- printf("**************************************"
- " TOF "
- "**************************************\n");
- printf("\n Version 3 of TOF initialing, "
- "TOF with holes for RICH detector\n");
+ if(fDebug) {
+ printf("%s: **************************************"
+ " TOF "
+ "**************************************\n",ClassName());
+ printf("\n%s Version 3 of TOF initialing, "
+ "TOF with holes for HMPID detector\n",ClassName());
+ }
AliTOF::Init();
@@ -687,9 +1038,11 @@ void AliTOFv3::Init()
fIdFLTB = gMC->VolId("FLTB");
fIdFLTC = gMC->VolId("FLTC");
- printf("**************************************"
- " TOF "
- "**************************************\n");
+ if(fDebug) {
+ printf("%s: **************************************"
+ " TOF "
+ "**************************************\n",ClassName());
+ }
}
//_____________________________________________________________________________
@@ -702,61 +1055,72 @@ void AliTOFv3::StepManager()
Float_t xm[3],pm[3],xpad[3],ppad[3];
Float_t hits[13],phi,phid,z;
Int_t vol[5];
- Int_t sector, plate, pad_x, pad_z, strip;
- Int_t copy, pad_z_id, pad_x_id, strip_id, i;
+ Int_t sector, plate, padx, padz, strip;
+ Int_t copy, padzid, padxid, stripid, i;
Int_t *idtmed = fIdtmed->GetArray()-499;
- Float_t IncidenceAngle;
+ Float_t incidenceAngle;
- if(gMC->GetMedium()==idtmed[513] &&
+ if(gMC->CurrentMedium()==idtmed[513] &&
gMC->IsTrackEntering() && gMC->TrackCharge()
&& gMC->CurrentVolID(copy)==fIdSens)
{
// getting information about hit volumes
- pad_z_id=gMC->CurrentVolOffID(2,copy);
- pad_z=copy;
+ padzid=gMC->CurrentVolOffID(2,copy);
+ padz=copy;
- pad_x_id=gMC->CurrentVolOffID(1,copy);
- pad_x=copy;
+ padxid=gMC->CurrentVolOffID(1,copy);
+ padx=copy;
- strip_id=gMC->CurrentVolOffID(5,copy);
+ stripid=gMC->CurrentVolOffID(4,copy);
strip=copy;
gMC->TrackPosition(pos);
gMC->TrackMomentum(mom);
// Double_t NormPos=1./pos.Rho();
- Double_t NormMom=1./mom.Rho();
+ Double_t normMom=1./mom.Rho();
// getting the cohordinates in pad ref system
xm[0] = (Float_t)pos.X();
xm[1] = (Float_t)pos.Y();
xm[2] = (Float_t)pos.Z();
- pm[0] = (Float_t)mom.X()*NormMom;
- pm[1] = (Float_t)mom.Y()*NormMom;
- pm[2] = (Float_t)mom.Z()*NormMom;
+ pm[0] = (Float_t)mom.X()*normMom;
+ pm[1] = (Float_t)mom.Y()*normMom;
+ pm[2] = (Float_t)mom.Z()*normMom;
gMC->Gmtod(xm,xpad,1);
gMC->Gmtod(pm,ppad,2);
- IncidenceAngle = TMath::ACos(ppad[1])*kRaddeg;
+ incidenceAngle = TMath::ACos(ppad[1])*kRaddeg;
z = pos[2];
- plate = 0;
- if (TMath::Abs(z) <= fZlenA*0.5) plate = 3;
+ plate = 0;
+ if (TMath::Abs(z) <= fZlenA*0.5) plate = 2; //3; // AdC
if (z < (fZlenA*0.5+fZlenB) &&
- z > fZlenA*0.5) plate = 4;
+ z > fZlenA*0.5) plate = 1; //4; // AdC
if (z >-(fZlenA*0.5+fZlenB) &&
- z < -fZlenA*0.5) plate = 2;
- if (z > (fZlenA*0.5+fZlenB)) plate = 5;
- if (z <-(fZlenA*0.5+fZlenB)) plate = 1;
+ z < -fZlenA*0.5) plate = 3; //2; // AdC
+ if (z > (fZlenA*0.5+fZlenB)) plate = 0; //5; // AdC
+ if (z <-(fZlenA*0.5+fZlenB)) plate = 4; //1; // AdC
+
+ if (plate==0) strip=AliTOFConstants::fgkNStripC-strip; // AdC
+ else if (plate==1) strip=AliTOFConstants::fgkNStripB-strip; // AdC
+ else strip--; // AdC
+
+ if (z<=0.) padx=AliTOFConstants::fgkNpadX-padx; // AdC
+ else padx--; // AdC
+
+ if (plate==3 || plate==4) padz=AliTOFConstants::fgkNpadZ-padz; // AdC
+ else padz--; // AdC
phi = pos.Phi();
- phid = phi*kRaddeg+180.;
+ if (phi>=0.) phid = phi*kRaddeg; //+180.; // AdC
+ else phid = phi*kRaddeg + 360.; // AdC
sector = Int_t (phid/20.);
- sector++;
+ //sector++; // AdC
for(i=0;i<3;++i) {
hits[i] = pos[i];
@@ -768,15 +1132,15 @@ void AliTOFv3::StepManager()
hits[8] = xpad[0];
hits[9] = xpad[1];
hits[10]= xpad[2];
- hits[11]= IncidenceAngle;
+ hits[11]= incidenceAngle;
hits[12]= gMC->Edep();
vol[0]= sector;
vol[1]= plate;
vol[2]= strip;
- vol[3]= pad_x;
- vol[4]= pad_z;
+ vol[3]= padx;
+ vol[4]= padz;
- AddHit(gAlice->CurrentTrack(),vol, hits);
+ AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits);
}
}