X-Git-Url: http://git.uio.no/git/?a=blobdiff_plain;f=macros%2FConfigBeautyPPR.C;h=3aa00ea1240777476a54df4c94c416db65640412;hb=4aa418779d51071508882a601fae75aefe126321;hp=278ef035009c9400df804dd0d133439c6d46f250;hpb=642b80f3d7efbceedc95425624de3d0991094eac;p=u%2Fmrichter%2FAliRoot.git diff --git a/macros/ConfigBeautyPPR.C b/macros/ConfigBeautyPPR.C index 278ef035009..3aa00ea1240 100644 --- a/macros/ConfigBeautyPPR.C +++ b/macros/ConfigBeautyPPR.C @@ -1,3 +1,38 @@ +#if !defined(__CINT__) || defined(__MAKECINT__) +#include +#include +#include +#include +#include +#include +#include "STEER/AliRunLoader.h" +#include "STEER/AliRun.h" +#include "STEER/AliConfig.h" +#include "PYTHIA6/AliDecayerPythia.h" +#include "PYTHIA6/AliGenPythia.h" +#include "STEER/AliMagFCM.h" +#include "STRUCT/AliBODY.h" +#include "STRUCT/AliMAG.h" +#include "STRUCT/AliABSOv0.h" +#include "STRUCT/AliDIPOv2.h" +#include "STRUCT/AliHALL.h" +#include "STRUCT/AliFRAMEv2.h" +#include "STRUCT/AliSHILv2.h" +#include "STRUCT/AliPIPEv0.h" +#include "ITS/AliITSvPPRasymm.h" +#include "TPC/AliTPCv2.h" +#include "TOF/AliTOFv5T0.h" +#include "HMPID/AliHMPIDv1.h" +#include "ZDC/AliZDCv1.h" +#include "TRD/AliTRDv1.h" +#include "FMD/AliFMDv0.h" +#include "MUON/AliMUONv1.h" +#include "PHOS/AliPHOSv1.h" +#include "PMD/AliPMDv1.h" +#include "T0/AliT0v1.h" +#include "ACORDE/AliACORDEv1.h" +#endif + void Config() { @@ -8,17 +43,38 @@ void Config() UInt_t procid=gSystem->GetPid(); UInt_t seed=curtime-procid; - gRandom->SetSeed(seed); + // gRandom->SetSeed(seed); + gRandom->SetSeed(12345); cerr<<"Seed for random number generation= "<Load("libgeant321"); +#endif + + new TGeant3TGeo("C++ Interface to Geant3"); //======================================================================= // Create the output file - TFile *rootfile = new TFile("galice.root","recreate"); - rootfile->SetCompressionLevel(2); - TGeant3 *geant3 = (TGeant3*)gMC; + AliRunLoader* rl=0x0; + + cout<<"Config.C: Creating Run Loader ..."<Fatal("Config.C","Can not instatiate the Run Loader"); + return; + } + rl->SetCompressionLevel(2); + rl->SetNumberOfEventsPerFile(3); + gAlice->SetRunLoader(rl); + + // Set the trigger configuration + gAlice->SetTriggerDescriptor("Pb-Pb"); + cout<<"Trigger configuration is set to Pb-Pb"<Init(); gMC->SetExternalDecayer(decayer); - // - // - //======================================================================= - // ******* GEANT STEERING parameters FOR ALICE SIMULATION ******* - geant3->SetTRIG(1); //Number of events to be processed - geant3->SetSWIT(4,10); - geant3->SetDEBU(0,0,1); - //geant3->SetSWIT(2,2); - geant3->SetDCAY(1); - geant3->SetPAIR(1); - geant3->SetCOMP(1); - geant3->SetPHOT(1); - geant3->SetPFIS(0); - geant3->SetDRAY(0); - geant3->SetANNI(1); - geant3->SetBREM(1); - geant3->SetMUNU(1); - geant3->SetCKOV(1); - geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3) - geant3->SetLOSS(2); - geant3->SetMULS(1); - geant3->SetRAYL(1); - geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0) - geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks - geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2) - geant3->SetERAN(5.e-7); - - Float_t cut = 1.e-3; // 1MeV cut by default - Float_t tofmax = 1.e10; - // GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX - geant3->SetCUTS(cut,cut, cut, cut, cut, cut, cut, cut, cut, cut, tofmax); + // //======================================================================= // ************* STEERING parameters FOR ALICE SIMULATION ************** // --- Specify event type to be tracked through the ALICE setup // --- All positions are in cm, angles in degrees, and P and E in GeV + + gMC->SetProcess("DCAY",1); + gMC->SetProcess("PAIR",1); + gMC->SetProcess("COMP",1); + gMC->SetProcess("PHOT",1); + gMC->SetProcess("PFIS",0); + gMC->SetProcess("DRAY",0); + gMC->SetProcess("ANNI",1); + gMC->SetProcess("BREM",1); + gMC->SetProcess("MUNU",1); + gMC->SetProcess("CKOV",1); + gMC->SetProcess("HADR",1); + gMC->SetProcess("LOSS",2); + gMC->SetProcess("MULS",1); + gMC->SetProcess("RAYL",1); + + Float_t cut = 1.e-3; // 1MeV cut by default + Float_t tofmax = 1.e10; + + gMC->SetCut("CUTGAM", cut); + gMC->SetCut("CUTELE", cut); + gMC->SetCut("CUTNEU", cut); + gMC->SetCut("CUTHAD", cut); + gMC->SetCut("CUTMUO", cut); + gMC->SetCut("BCUTE", cut); + gMC->SetCut("BCUTM", cut); + gMC->SetCut("DCUTE", cut); + gMC->SetCut("DCUTM", cut); + gMC->SetCut("PPCUTM", cut); + gMC->SetCut("TOFMAX", tofmax); + + // AliGenPythia *gener = new AliGenPythia(ntracks); AliGenPythia *gener = new AliGenPythia(-1); gener->SetMomentumRange(0,999); - gener->SetPhiRange(-180.,180.); + gener->SetPhiRange(0.,360.); gener->SetThetaRange(0,180); gener->SetYRange(-999,999); //gener->SetPtRange(0,100); @@ -81,7 +139,7 @@ void Config() // The following settings select the Pythia parameters tuned to agree // with beauty NLO calculation for Pb-Pb @ 5.5 TeV with MNR code. // - gener->SetProcess(kPyBeautyPbMNR); + gener->SetProcess(kPyBeautyPbPbMNR); gener->SetStrucFunc(kCTEQ4L); gener->SetPtHard(2.75,-1.0); gener->SetEnergyCMS(5500.); @@ -103,7 +161,7 @@ void Config() gAlice->SetField(field); Int_t iABSO=0; - Int_t iCASTOR=0; + Int_t iACORDE=0; Int_t iDIPO=0; Int_t iFMD=0; Int_t iFRAME=0; @@ -114,9 +172,9 @@ void Config() Int_t iPHOS=0; Int_t iPIPE=0; Int_t iPMD=0; - Int_t iRICH=0; + Int_t iHMPID=0; Int_t iSHIL=0; - Int_t iSTART=0; + Int_t iT0=0; Int_t iTOF=0; Int_t iTPC=0; Int_t iTRD=0; @@ -161,7 +219,7 @@ void Config() if(iSHIL) { //=================== SHIL parameters ============================ - AliSHIL *SHIL = new AliSHILv0("SHIL","Shielding"); + AliSHIL *SHIL = new AliSHILv2("SHIL","Shielding"); } @@ -198,23 +256,11 @@ void Config() ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [150,300] ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [150,300] - ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [100,300] - ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [100,300] + ITS->SetThicknessChip1(150.); // chip thickness on layer 1 must be in the range [100,300] + ITS->SetThicknessChip2(150.); // chip thickness on layer 2 must be in the range [100,300] ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon // - //AliITSvPPRsymm *ITS = new AliITSvPPRsymm("ITS","New ITS PPR detailed version with symmetric services"); - //ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer - //ITS->SetReadDet(kFALSE); // don't touch this parameter if you're not an ITS developer - //ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRsymm2.det"); // don't touch this parameter if you're not an ITS developer - //ITS->SetThicknessDet1(300.); // detector thickness on layer 1 must be in the range [150,300] - //ITS->SetThicknessDet2(300.); // detector thickness on layer 2 must be in the range [150,300] - //ITS->SetThicknessChip1(300.); // chip thickness on layer 1 must be in the range [100,300] - //ITS->SetThicknessChip2(300.); // chip thickness on layer 2 must be in the range [100,300] - //ITS->SetRails(1); // 1 --> rails in ; 0 --> rails out - //ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon - // - // // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful // for reconstruction !): // @@ -242,40 +288,19 @@ void Config() if(iTPC) { - //============================ TPC parameters ================================ - // --- This allows the user to specify sectors for the SLOW (TPC geometry 2) - // --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper) - // --- sectors are specified, any value other than that requires at least one - // --- sector (lower or upper)to be specified! - // --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0) - // --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0) - // --- SecLows - number of lower sectors specified (up to 6) - // --- SecUps - number of upper sectors specified (up to 12) - // --- Sens - sensitive strips for the Slow Simulator !!! - // --- This does NOT work if all S or L-sectors are specified, i.e. - // --- if SecAL or SecAU < 0 - // - // - //----------------------------------------------------------------------------- - - // gROOT->LoadMacro("SetTPCParam.C"); - // AliTPCParam *param = SetTPCParam(); + //============================ TPC parameters =================== AliTPC *TPC = new AliTPCv2("TPC","Default"); - // All sectors included - TPC->SetSecAL(-1); - TPC->SetSecAU(-1); - } if(iTOF) { //=================== TOF parameters ============================ - AliTOF *TOF = new AliTOFv2("TOF","normal TOF"); + AliTOF *TOF = new AliTOFv5T0("TOF","normal TOF"); } - if(iRICH) { - //=================== RICH parameters =========================== - AliRICH *RICH = new AliRICHv1("RICH","normal RICH"); + if(iHMPID) { + //=================== HMPID parameters =========================== + AliHMPID *HMPID = new AliHMPIDv1("HMPID","normal HMPID"); } @@ -286,26 +311,16 @@ void Config() AliZDC *ZDC = new AliZDCv1("ZDC","normal ZDC"); } - if(iCASTOR) { - //=================== CASTOR parameters ============================ + if(iACORDE) { + //=================== ACORDE parameters ============================ - AliCASTOR *CASTOR = new AliCASTORv1("CASTOR","normal CASTOR"); + AliACORDE *ACORDE = new AliACORDEv1("ACORDE","normal ACORDE"); } if(iTRD) { //=================== TRD parameters ============================ AliTRD *TRD = new AliTRDv1("TRD","TRD slow simulator"); - - // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2) - TRD->SetGasMix(1); - - // With hole in front of PHOS - TRD->SetPHOShole(); - // With hole in front of RICH - TRD->SetRICHhole(); - // Switch on TR - AliTRDsim *TRDsim = TRD->CreateTR(); } if(iFMD) { @@ -337,9 +352,9 @@ void Config() } - if(iSTART) { - //=================== START parameters ============================ - AliSTART *START = new AliSTARTv1("START","START Detector"); + if(iT0) { + //=================== T0 parameters ============================ + AliT0 *T0 = new AliT0v1("T0","T0 Detector"); }