Macros used to produce the OCDB entries for MC. One for default (p-p) and one for...
[u/mrichter/AliRoot.git] / HMPID / AliHMPIDv3.cxx
CommitLineData
100711d2 1// **************************************************************************
2// * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3// * *
4// * Author: The ALICE Off-line Project. *
5// * Contributors are mentioned in the code where appropriate. *
6// * *
7// * Permission to use, copy, modify and distribute this software and its *
8// * documentation strictly for non-commercial purposes is hereby granted *
9// * without fee, provided that the above copyright notice appears in all *
10// * copies and that both the copyright notice and this permission notice *
11// * appear in the supporting documentation. The authors make no claims *
12// * about the suitability of this software for any purpose. It is *
13// * provided "as is" without express or implied warranty. *
14// **************************************************************************
15
16
17#include "AliHMPIDv3.h" //class header
18#include "AliHMPIDParam.h" //StepManager()
19#include "AliHMPIDHit.h" //Hits2SDigs(),StepManager()
20#include "AliHMPIDDigit.h" //Digits2Raw(), Raw2SDigits()
21#include "AliHMPIDRawStream.h" //Digits2Raw(), Raw2SDigits()
22#include "AliRawReader.h" //Raw2SDigits()
23#include "AliTrackReference.h"
24#include <TVirtualMC.h> //StepManager() for gMC
25#include <TPDGCode.h> //StepHistory()
26#include <AliStack.h> //StepManager(),Hits2SDigits()78.6
27#include <AliLoader.h> //Hits2SDigits()
28#include <AliRunLoader.h> //Hits2SDigits()
29#include <AliMC.h> //StepManager()
30#include <AliRun.h> //CreateMaterials()
31#include <AliMagF.h> //CreateMaterials()
f7a1cc68 32#include "AliGeomManager.h" //AddAlignableVolumes()
33#include <AliCDBEntry.h> //CreateMaterials()
34#include <AliCDBManager.h> //CreateMaterials()
100711d2 35#include <TF1.h> //DefineOpticalProperties()
36#include <TF2.h> //DefineOpticalProperties()
f7a1cc68 37#include <TGeoCompositeShape.h> //CradleBaseVolume()
38#include <TGeoGlobalMagField.h>
100711d2 39#include <TGeoPhysicalNode.h> //AddAlignableVolumes()
40#include <TGeoXtru.h> //CradleBaseVolume()
f7a1cc68 41#include <TLorentzVector.h> //IsLostByFresnel()
100711d2 42#include <TString.h> //StepManager()
db53fc59 43
100711d2 44ClassImp(AliHMPIDv3)
45//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
46void AliHMPIDv3::AddAlignableVolumes()const
47{
48// Associates the symbolic volume name with the corresponding volume path. Interface method from AliModule invoked from AliMC
49// Arguments: none
50// Returns: none
51
db53fc59 52 AliGeomManager::ELayerID idHMPID = AliGeomManager::kHMPID;
53 Int_t modUID, modnum = 0;
54
100711d2 55 TGeoHMatrix *pGm = new TGeoHMatrix;
56 Double_t trans[3]={0.5*131.24,0.5*126.16,0}; //translation from LORS to TGeo RS (half size AllX, half size allY,0)
57 pGm->SetTranslation(trans);
58
59 Double_t ph[7]={10.,10., 30.,30.,30. ,50.,50};
60
61 for(Int_t iCh=AliHMPIDParam::kMinCh;iCh<=AliHMPIDParam::kMaxCh;iCh++) {
db53fc59 62 modUID = AliGeomManager::LayerToVolUID(idHMPID,modnum++);
63 if(!gGeoManager->SetAlignableEntry(Form("/HMPID/Chamber%i",iCh),Form("ALIC_1/Hmp%i_0",iCh),modUID))
5b89b470 64 AliError("AliHMPIDv3::Unable to set alignable entry!!"); //aligment without AliCluster3D
db53fc59 65 //Get Tracking To Local matricies for alignment with AliCluster3D
66 TGeoPNEntry *eCh = gGeoManager->GetAlignableEntryByUID(modUID);
67 TGeoHMatrix *globMatrix = eCh->GetGlobalOrig();
68
69 //Double_t phi = 20.0 * ((iCh+1) / 3) + 10.0;
70 Double_t phi = ph[iCh];
71 TGeoHMatrix *t2l = new TGeoHMatrix();
72 t2l->RotateZ(phi);
73 t2l->MultiplyLeft(&(globMatrix->Inverse()));
74 eCh->SetMatrix(t2l);
75 }//iCh loop
76
100711d2 77}
78//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
79void AliHMPIDv3::CreateMaterials()
80{
81// Definition of available HMPID materials
82// Arguments: none
83// Returns: none
84 AliDebug(1,"Start v2 HMPID.");
85
86 //clm update material definition later on from Antonello
87
88//data from PDG booklet 2002 density [gr/cm^3] rad len [cm] abs len [cm]
89 Float_t aAir[4]={12,14,16,36} , zAir[4]={6,7,8,18} , wAir[4]={0.000124,0.755267,0.231781,0.012827} , dAir=0.00120479; Int_t nAir=4;//mixture 0.9999999
90 Float_t aC6F14[2]={ 12.01 , 18.99} , zC6F14[2]={ 6 , 9} , wC6F14[2]={6 , 14} , dC6F14=1.68 ; Int_t nC6F14=-2;
91 Float_t aSiO2[2]={ 28.09 , 15.99} , zSiO2[2]={14 , 8} , wSiO2[2]={1 , 2} , dSiO2=2.64 ; Int_t nSiO2=-2;
92 Float_t aCH4[2]={ 12.01 , 1.01} , zCH4[2]={ 6 , 1} , wCH4[2]={1 , 4} , dCH4=7.17e-4 ; Int_t nCH4=-2;
93// not necessary...PCB properties instead! Float_t aCsI[2]={132.90 ,126.90} , zCsI[2]={55 ,53} , wCsI[2]={1 , 1} , dCsI=0.1 ; Int_t nCsI=-2;
94
95 Float_t aRoha = 12.01 , zRoha = 6 , dRoha = 0.10 , radRoha = 18.80 , absRoha = 86.3/dRoha; //special material- quasi quartz
96 Float_t aCu = 63.55 , zCu = 29 , dCu = 8.96 , radCu = 1.43 , absCu = 134.9/dCu ;
97 Float_t aW =183.84 , zW = 74 , dW = 19.30 , radW = 0.35 , absW = 185.0/dW ;
98 Float_t aAl = 26.98 , zAl = 13 , dAl = 2.70 , radAl = 8.90 , absAl = 106.4/dAl ;
99 Float_t aAr = 39.94 , zAr = 18 , dAr = 1.396e-3, radAr = 14.0 , absAr = 117.2/dAr ;
100
101 Int_t matId=0; //tmp material id number
102 Int_t unsens = 0, sens=1; //sensitive or unsensitive medium
f7a1cc68 103 Int_t itgfld = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ(); //type of field intergration 0 no field -1 user in guswim 1 Runge Kutta 2 helix 3 const field along z
104 Float_t maxfld = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max(); //max field value
100711d2 105 Float_t tmaxfd = -10.0; //max deflection angle due to magnetic field in one step
106 Float_t deemax = - 0.2; //max fractional energy loss in one step
107 Float_t stemax = - 0.1; //max step allowed [cm]
108 Float_t epsil = 0.001; //abs tracking precision [cm]
109 Float_t stmin = - 0.001; //min step size [cm] in continius process transport, negative value: choose it automatically
110
111 // PCB copmposed mainly by G10 (Si,C,H,O) -> CsI is negligible (<500nm thick)
112 // So what is called CsI has the optical properties of CsI, but the composition of G-10 (for delta elec, etc production...)
113
114 Float_t aG10[4] = {28.09,12.01,1.01,16.00};
115 Float_t zG10[4] = {14., 6., 1., 8.};
116 Float_t wG10[4] = {0.129060,0.515016,0.061873,0.294050};
117 Float_t dG10 = 1.7;
118 Int_t nG10 = 4;
119
120 AliMixture(++matId,"Air" ,aAir ,zAir ,dAir ,nAir ,wAir ); AliMedium(kAir ,"Air" ,matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);
121 AliMixture(++matId,"C6F14",aC6F14,zC6F14,dC6F14,nC6F14,wC6F14); AliMedium(kC6F14,"C6F14",matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);
122 AliMixture(++matId,"SiO2" ,aSiO2 ,zSiO2 ,dSiO2 ,nSiO2 ,wSiO2 ); AliMedium(kSiO2 ,"SiO2" ,matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);
123 AliMixture(++matId,"CH4" ,aCH4 ,zCH4 ,dCH4 ,nCH4 ,wCH4 ); AliMedium(kCH4 ,"CH4" ,matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);
124// AliMixture(++matId,"CsI" ,aCsI ,zCsI ,dCsI ,nCsI ,wCsI ); AliMedium(kCsI ,"CsI" ,matId, sens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);//sensitive
125 AliMixture(++matId,"CsI+PCB",aG10 , zG10, dG10,nG10 ,wG10 ); AliMedium(kCsI ,"CsI" ,matId, sens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);//sensitive
126
127 AliMixture(++matId ,"Neo" ,aSiO2 ,zSiO2 ,dSiO2 ,nSiO2 ,wSiO2 ); AliMedium(kNeo ,"Neo" ,matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin); //clm neoceram
128 AliMaterial(++matId,"Roha",aRoha,zRoha,dRoha,radRoha,absRoha); AliMedium(kRoha ,"Roha" ,matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin); //Roha->honeycomb
129
130
131 AliMaterial(++matId,"Cu" ,aCu ,zCu ,dCu ,radCu ,absCu ); AliMedium(kCu ,"Cu" , matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);
132 AliMaterial(++matId,"W" ,aW ,zW ,dW ,radW ,absW ); AliMedium(kW ,"W" , matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);
133 AliMaterial(++matId,"Al" ,aAl ,zAl ,dAl ,radAl ,absAl ); AliMedium(kAl ,"Al" , matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);
134 AliMaterial(++matId,"Ar" ,aAr ,zAr ,dAr ,radAr ,absAr ); AliMedium(kAr ,"Ar" , matId, unsens, itgfld, maxfld, tmaxfd, stemax, deemax, epsil, stmin);
100711d2 135
136}//void AliHMPID::CreateMaterials()
137//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
138void AliHMPIDv3::InitProperties()
139{
140/*
141* HMPID
142* ====
143*
144* GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA ANNI BREM COMP DCAY DRAY HADR LOSS MULS PAIR PHOT RAYL
145* Quarz Window (>1000 keV delta-electrons)
146HMPID 3 1.e-4 1.e-4 1.e-4 -1. 1.e-4 -1. -1. 1.e-3 1.e-3 -1. -1 -1 -1 -1 1 -1 1 -1 -1 -1 -1
147* Freon Radiator (> 500 keV delta-electrons)
148HMPID 4 1.e-4 1.e-4 1.e-4 -1. 1.e-4 -1. -1. 5.e-4 5.e-4 -1. -1 -1 -1 -1 1 -1 1 -1 -1 -1 -1
149* Methane Gap (> 100 keV delta-electrons)
150HMPID 5 5.e-5 1.e-5 1.e-4 -1. 1.e-4 -1. -1. 1.e-4 1.e-4 -1. -1 -1 -1 -1 1 -1 1 -1 -1 -1 -1
151* Sensitive Volume (> 50 keV delta-electrons)
152HMPID 9 1.e-5 1.e-5 1.e-4 -1. 1.e-4 -1. -1. 5.e-5 5.e-5 -1. -1 -1 -1 -1 1 -1 1 -1 -1 -1 -1
153* CSI (> 50 keV delta-electrons)
154HMPID 6 1.e-5 1.e-5 1.e-4 -1. 1.e-4 -1. -1. 5.e-5 5.e-5 -1. -1 -1 -1 -1 1 -1 1 -1 -1 -1 -1
155* PCB backplane (> 50 keV delta-electrons)
156HMPID 12 1.e-5 1.e-5 1.e-4 -1. 1.e-4 -1. -1. 5.e-5 5.e-5 -1. -1 -1 -1 -1 1 -1 1 -1 -1 -1 -1
157*/
158 Int_t *idtmed = fIdtmed->GetArray();
159 Int_t imed;
160
161 imed = kSiO2; // * Quarz Window (>1000 keV delta-electrons)
162 gMC->Gstpar(idtmed[imed], "CUTGAM",1.e-4);
163 gMC->Gstpar(idtmed[imed], "CUTELE",1.e-4);
164 gMC->Gstpar(idtmed[imed], "CUTNEU",1.e-4);
165 gMC->Gstpar(idtmed[imed], "CUTMUO",1.e-4);
166 gMC->Gstpar(idtmed[imed], "DCUTE" ,1.e-3);
167 gMC->Gstpar(idtmed[imed], "CUTHAD",1.e-3);
168
169 gMC->Gstpar(idtmed[imed], "DRAY",1);
170 gMC->Gstpar(idtmed[imed], "LOSS",1);
171
172 imed = kC6F14; // * Freon Radiator (> 500 keV delta-electrons)
173 gMC->Gstpar(idtmed[imed], "CUTGAM",1.e-4);
174 gMC->Gstpar(idtmed[imed], "CUTELE",1.e-4);
175 gMC->Gstpar(idtmed[imed], "CUTNEU",1.e-4);
176 gMC->Gstpar(idtmed[imed], "CUTMUO",1.e-4);
177 gMC->Gstpar(idtmed[imed], "DCUTE" ,5.e-4);
178 gMC->Gstpar(idtmed[imed], "CUTHAD",5.e-4);
179
180 gMC->Gstpar(idtmed[imed], "DRAY",1);
181 gMC->Gstpar(idtmed[imed], "LOSS",1);
182
183 imed = kCH4; // * Methane Gap (> 100 keV delta-electrons)
184 gMC->Gstpar(idtmed[imed], "CUTGAM",5.e-5);
185 gMC->Gstpar(idtmed[imed], "CUTELE",5.e-5);
186 gMC->Gstpar(idtmed[imed], "CUTNEU",1.e-4);
187 gMC->Gstpar(idtmed[imed], "CUTMUO",1.e-4);
188 gMC->Gstpar(idtmed[imed], "DCUTE" ,1.e-4);
189 gMC->Gstpar(idtmed[imed], "CUTHAD",1.e-4);
190
191 gMC->Gstpar(idtmed[imed], "DRAY",1);
192 gMC->Gstpar(idtmed[imed], "LOSS",1);
193
194 imed = kCsI; // * CSI (> 50 keV delta-electrons)
195 gMC->Gstpar(idtmed[imed], "CUTGAM",1.e-5);
196 gMC->Gstpar(idtmed[imed], "CUTELE",1.e-5);
197 gMC->Gstpar(idtmed[imed], "CUTNEU",1.e-4);
198 gMC->Gstpar(idtmed[imed], "CUTMUO",1.e-4);
199 gMC->Gstpar(idtmed[imed], "DCUTE" ,5.e-5);
200 gMC->Gstpar(idtmed[imed], "CUTHAD",5.e-5);
201
202 gMC->Gstpar(idtmed[imed], "DRAY",1);
203 gMC->Gstpar(idtmed[imed], "LOSS",1);
204
205 imed = kAl; // * Alluminium (> 50 keV delta-electrons)
206 gMC->Gstpar(idtmed[imed], "CUTGAM",1.e-5);
207 gMC->Gstpar(idtmed[imed], "CUTELE",1.e-5);
208 gMC->Gstpar(idtmed[imed], "CUTNEU",1.e-4);
209 gMC->Gstpar(idtmed[imed], "CUTMUO",1.e-4);
210 gMC->Gstpar(idtmed[imed], "DCUTE" ,5.e-5);
211 gMC->Gstpar(idtmed[imed], "CUTHAD",5.e-5);
212
213 gMC->Gstpar(idtmed[imed], "DRAY",1);
214 gMC->Gstpar(idtmed[imed], "LOSS",1);
215
216 imed = kCu; // * Copper (> 50 keV delta-electrons)
217 gMC->Gstpar(idtmed[imed], "CUTGAM",1.e-5);
218 gMC->Gstpar(idtmed[imed], "CUTELE",1.e-5);
219 gMC->Gstpar(idtmed[imed], "CUTNEU",1.e-4);
220 gMC->Gstpar(idtmed[imed], "CUTMUO",1.e-4);
221 gMC->Gstpar(idtmed[imed], "DCUTE" ,5.e-5);
222 gMC->Gstpar(idtmed[imed], "CUTHAD",5.e-5);
223
224 gMC->Gstpar(idtmed[imed], "DRAY",1);
225 gMC->Gstpar(idtmed[imed], "LOSS",1);
226
227 imed = kW; // * Tungsten (> 50 keV delta-electrons)
228 gMC->Gstpar(idtmed[imed], "CUTGAM",1.e-5);
229 gMC->Gstpar(idtmed[imed], "CUTELE",1.e-5);
230 gMC->Gstpar(idtmed[imed], "CUTNEU",1.e-4);
231 gMC->Gstpar(idtmed[imed], "CUTMUO",1.e-4);
232 gMC->Gstpar(idtmed[imed], "DCUTE" ,5.e-5);
233 gMC->Gstpar(idtmed[imed], "CUTHAD",5.e-5);
234
235 gMC->Gstpar(idtmed[imed], "DRAY",1);
236 gMC->Gstpar(idtmed[imed], "LOSS",1);
237
238}
239//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
240void AliHMPIDv3::CreateGeometry()
241{
242//Creates detailed geometry simulation (currently GEANT volumes tree)
243//includind the HMPID cradle
244
245 AliDebug(1,"Start main.");
246 if(!gMC->IsRootGeometrySupported()) return;
247
248 TGeoVolume *hmpcradle = CreateCradle();
249 TString title=GetTitle();
250 if(title.Contains("TestBeam")){
251 TGeoVolume *hmpid = CreateChamber(3);
252 gGeoManager->GetVolume("ALIC")->AddNode(hmpid,0);
253 }else{
254 for(Int_t iCh=AliHMPIDParam::kMinCh;iCh<=AliHMPIDParam::kMaxCh;iCh++){//place 7 chambers
255 TGeoVolume *hmpid = CreateChamber(iCh);
256 TGeoHMatrix *pMatrix=new TGeoHMatrix;
257 IdealPosition(iCh,pMatrix);
258 gGeoManager->GetVolume("ALIC")->AddNode(hmpid,0,pMatrix);
259 if(iCh==1 || iCh == 3 || iCh == 5){
260 TGeoHMatrix *pCradleMatrix=new TGeoHMatrix;
261 IdealPositionCradle(iCh,pCradleMatrix);
262 gGeoManager->GetVolume("ALIC")->AddNode(hmpcradle,iCh,pCradleMatrix);
263 }
264 }
265 }
266 AliDebug(1,"Stop v3. HMPID option");
267}
268
269
270TGeoVolume * AliHMPIDv3::CreateChamber(Int_t number)
271{
272 //Single module geometry building
273
274 Double_t cm=1,mm=0.1*cm,um=0.001*mm;//default is cm
275
276 TGeoVolume *hmp = new TGeoVolumeAssembly(Form("Hmp%i",number));
277
278 TGeoMedium *al =gGeoManager->GetMedium("HMPID_Al");
279 TGeoMedium *ch4 =gGeoManager->GetMedium("HMPID_CH4");
280 TGeoMedium *roha =gGeoManager->GetMedium("HMPID_Roha");
281 TGeoMedium *neoc =gGeoManager->GetMedium("HMPID_Neo");
282 TGeoMedium *c6f14=gGeoManager->GetMedium("HMPID_C6F14");
283 TGeoMedium *sio2 =gGeoManager->GetMedium("HMPID_SiO2");
284 TGeoMedium *cu =gGeoManager->GetMedium("HMPID_Cu");
285 TGeoMedium *w =gGeoManager->GetMedium("HMPID_W");
286 TGeoMedium *csi =gGeoManager->GetMedium("HMPID_CsI");
287 TGeoMedium *ar =gGeoManager->GetMedium("HMPID_Ar");
288
289
290 TGeoRotation *rot=new TGeoRotation("HwireRot"); rot->RotateY(90); //rotate wires around Y to be along X (initially along Z)
291 TGeoVolume *sbo=gGeoManager->MakeBox ("Hsbo",ch4 , 1419*mm/2 , 1378.00*mm/2 , 50.5*mm/2);//2072P1
292 TGeoVolume *cov=gGeoManager->MakeBox ("Hcov",al , 1419*mm/2 , 1378.00*mm/2 , 0.5*mm/2);
293 TGeoVolume *hon=gGeoManager->MakeBox ("Hhon",roha , 1359*mm/2 , 1318.00*mm/2 , 49.5*mm/2);
294 TGeoVolume *rad=gGeoManager->MakeBox ("Hrad",c6f14, 1330*mm/2 , 413.00*mm/2 , 24.0*mm/2); //2011P1
295 TGeoVolume *neo=gGeoManager->MakeBox ("Hneo",neoc , 1330*mm/2 , 413.00*mm/2 , 4.0*mm/2);
296 TGeoVolume *win=gGeoManager->MakeBox ("Hwin",sio2 , 1330*mm/2 , 413.00*mm/2 , 5.0*mm/2);
297 TGeoVolume *si1=gGeoManager->MakeBox ("Hsi1",sio2 , 1330*mm/2 , 5.00*mm/2 , 15.0*mm/2);
298 TGeoVolume *si2=gGeoManager->MakeBox ("Hsi2",neoc , 10*mm/2 , 403.00*mm/2 , 15.0*mm/2);
299 TGeoVolume *spa=gGeoManager->MakeTube("Hspa",sio2 , 0*mm , 5.00*mm , 15.0*mm/2);
300 TGeoVolume *fr4=gGeoManager->MakeBox ("Hfr4",ch4 , 1407*mm/2 , 1366.00*mm/2 , 15.0*mm/2);//2043P1
301 TGeoVolume *f4a=gGeoManager->MakeBox ("Hf4a",al , 1407*mm/2 , 1366.00*mm/2 , 10.0*mm/2);
302 TGeoVolume *f4i=gGeoManager->MakeBox ("Hf4i",ch4 , 1323*mm/2 , 1296.00*mm/2 , 10.0*mm/2);
303 TGeoVolume *col=gGeoManager->MakeTube("Hcol",cu , 0*mm , 100.00*um , 1323.0*mm/2);
304 TGeoVolume *sec=gGeoManager->MakeBox ("Hsec",ch4 , 648*mm/2 , 411.00*mm/2 , 6.2*mm/2);//sec=gap 2099P1 (6.2 = 4.45 + 0.05 (1/2 diameter wire)+1.7)
305
306 Double_t cellx=8.04*mm,celly=8.4*mm; Int_t nPadX=80, nPadY=48;
307 TGeoVolume *gap=gGeoManager->MakeBox ("Hgap",ch4 , cellx*nPadX/2 , celly*nPadY/2 , 6.2*mm/2); //x=8.04*80 y=8.4*48 z=pad+pad-ano+marign 2006p1
308 TGeoVolume *row= gap->Divide ("Hrow",2,nPadY,0,0);//along Y->48 rows
309 TGeoVolume *cel= row->Divide (Form("Hcel%i",number),1,nPadX,0,0);//along X->80 cells
310 TGeoVolume *cat=gGeoManager->MakeTube("Hcat",cu , 0.00*mm , 50.00*um , cellx/2);
311 TGeoVolume *ano=gGeoManager->MakeTube("Hano",w , 0.00*mm , 20.00*um , cellx/2);
312 TGeoVolume *pad=gGeoManager->MakeBox (Form("Hpad%i",number),csi , 7.54*mm/2 , 7.90*mm/2 , 1.7*mm/2); //2006P1 PCB material...
313 TGeoVolume *fr1=gGeoManager->MakeBox ("Hfr1",al , 1463*mm/2 , 1422.00*mm/2 , 58.3*mm/2);//2040P1 and pad plane is excluded (62 - 2 - 17)
314 TGeoVolume *fr1up=gGeoManager->MakeBox ("Hfr1up",ch4,(1426.00-37.00)*mm/2 , (1385.00-37.00)*mm/2 , 20.0*mm/2);//2040P1
315
316 TGeoVolume *fr1upcard=gGeoManager->MakeBox ("Hfr1upcard",ch4,662.*mm/2., 425.*mm/2. ,19.0*mm/2);//needed to set the gassiplex
317
318 TGeoVolume *fr1perUpBig=gGeoManager->MakeBox ("Hfr1perUpBig",ch4,1389*mm/2,35*mm/2,10*mm/2);
319 TGeoVolume *fr1perUpSma=gGeoManager->MakeBox ("Hfr1perUpSma",ch4,35*mm/2,(1385-37-2*35)*mm/2,10*mm/2);
320 TGeoVolume *fr1perDowBig=gGeoManager->MakeBox ("Hfr1perDowBig",ch4,1389*mm/2,46*mm/2,2.3*mm/2);
321 TGeoVolume *fr1perDowSma=gGeoManager->MakeBox ("Hfr1perDowSma",ch4,46*mm/2,(1385-37-2*46)*mm/2,2.3*mm/2);
322
323 TGeoVolume *ppf=gGeoManager->MakeBox ("Hppf",al , 648*mm/2 , 411.00*mm/2 , 38.3*mm/2);//2001P2
324 TGeoVolume *lar=gGeoManager->MakeBox ("Hlar",ar , 181*mm/2 , 89.25*mm/2 , 38.3*mm/2);//2001P2
325 TGeoVolume *smo=gGeoManager->MakeBox ("Hsmo",ar , 114*mm/2 , 89.25*mm/2 , 38.3*mm/2);//2001P2
326
327 TGeoVolume *cufoil = gGeoManager->MakeBox("Hcufoil", csi, 662.*mm/2., 425.*mm/2., 1.*mm/2.);//PCB foil at the back of the ppf with holes for GASSIPLEX
328 TGeoVolume *rect = gGeoManager->MakeBox("Hrect",ch4, 48*mm/2, 19*mm/2., 1*mm/2.);
329
330
331 TGeoVolume *fr3= gGeoManager->MakeBox("Hfr3", al, 1463*mm/2, 1422*mm/2, 34*mm/2);//2041P1
332 TGeoVolume *fr3up= gGeoManager->MakeBox("Hfr3up", ch4, 1323*mm/2, 1282*mm/2, 20*mm/2);//2041P1
333 TGeoVolume *fr3down=gGeoManager->MakeBox("Hfr3down", ch4, 1437*mm/2, 1370*mm/2, 14*mm/2);//2041P1
334
335
336 TGeoVolume *proxgap1 = gGeoManager->MakeBox("Hproxgap1",ch4,1407*mm/2 , 1366.00*mm/2 ,(9.-7.5)*mm/2.);//methane volume between quartz and fr4
c4860469 337 TGeoVolume *proxgap2 = gGeoManager->MakeBox("Hproxgap2",ch4,1407*mm/2 , 1366.00*mm/2 ,(81.7-6.2-34.-9.-7.5)*mm/2.);//methane volume between fr4 and Hgap(tot height(81.7) - Hsec (6.2) - proxygap2 (34) - upper bound of fr4 (9+7.5))
338
100711d2 339
340// ^ Y z= z=-12mm z=98.25mm ALIC->7xHmp (virtual)-->1xHsbo (virtual) --->2xHcov (real) 2072P1
341// | ____________________________________ | |-->1xHhon (real) 2072P1
342// | | ______ ____ ______ | |
343// | | | | | * | | | |->3xHrad (virtual) --->1xHneo (real) 2011P1
344// | |50.5mm| |24mm| * |45.5mm| | | |-->1xHwin (real) 2011P1
345// | | | | | * | | | | |-->2xHsi1 (real) 2011P1
346// | | | |____| * |______| | | |-->2xHsi2 (real) 2011P1
347// | | | ____ * ______ | | |->30xHspa (real) 2011P1
348// | | | | | * | | | |
349// | | | | | * | | | |->1xHfr4 (vitual) --->1xHf4a (real)---->1xHf4i(virtual) 2043P1
350// | | sb | | rad| * | | | | |-->322xHcol (real) 2043P1
351// | | | |____| * |______| | |
352// | | | ____ * ______ | |->1xHfr1 (real) --> 6xHppf(real) ---->8xHlar (virtual) 2001P1
353// | | | | | * | | | | |--->8xHsmo (virtual) 2001P1
354// | | | | | * | | | |
355// | | | | | * | | | |-> 6xHgap (virtual) --->48xHrow (virtual) -->80xHcel (virtual) -->4xHcat (real) from p84 TDR
356// | |______| |____| * |______| | |-->2xHano (real) from p84 TDR
357// |____________________________________| |-->1xHpad (real) from p84 TDR
358// --->Z
359 hmp->AddNode(sbo ,1,new TGeoTranslation( 0*mm, 0*mm, -73.75*mm)); //p.84 TDR
360 sbo->AddNode(hon ,1,new TGeoTranslation( 0*mm,0*mm, 0*mm)); //2072P1
361 sbo->AddNode(cov ,1,new TGeoTranslation( 0*mm,0*mm, +25*mm));
362 sbo->AddNode(cov ,2,new TGeoTranslation( 0*mm,0*mm, -25*mm));
363 hmp->AddNode(rad,2,new TGeoTranslation( 0*mm,+434*mm, -12.00*mm));
364 hmp->AddNode(rad,1,new TGeoTranslation( 0*mm, 0*mm, -12.00*mm));
365 hmp->AddNode(rad,0,new TGeoTranslation( 0*mm,-434*mm, -12.00*mm));
366 rad->AddNode(neo,1,new TGeoTranslation( 0*mm, 0*mm, -10.0*mm));
367 rad->AddNode(win,1,new TGeoTranslation( 0*mm, 0*mm, 9.5*mm));
368 rad->AddNode(si1,1,new TGeoTranslation( 0*mm,-204*mm, -0.5*mm)); rad->AddNode(si1,2,new TGeoTranslation( 0*mm,+204*mm, -0.5*mm));
369 rad->AddNode(si2,1,new TGeoTranslation(-660*mm, 0*mm, -0.5*mm)); rad->AddNode(si2,2,new TGeoTranslation(+660*mm, 0*mm, -0.5*mm));
370 for(Int_t i=0;i<3;i++) for(Int_t j=0;j<10;j++) rad->AddNode(spa,10*i+j,new TGeoTranslation(-1330*mm/2+116*mm+j*122*mm,(i-1)*105*mm,-0.5*mm));
371 hmp->AddNode(fr4,1,new TGeoTranslation( 0*mm, 0*mm, 9.00*mm)); //p.84 TDR
372 for(int i=1;i<=322;i++) fr4->AddNode(col,i,new TGeoCombiTrans( 0*mm, -1296/2*mm+i*4*mm,-5*mm,rot)); //F4 2043P1
373 fr4->AddNode(f4a,1,new TGeoTranslation( 0*mm,0*mm, 2.5*mm));
374 f4a->AddNode(f4i,1,new TGeoTranslation( 0*mm,0*mm, 0*mm));
375 hmp->AddNode(sec,4,new TGeoTranslation(-335*mm,+433*mm, 78.6*mm)); hmp->AddNode(sec,5,new TGeoTranslation(+335*mm,+433*mm, 78.6*mm));
376 hmp->AddNode(sec,2,new TGeoTranslation(-335*mm, 0*mm, 78.6*mm)); hmp->AddNode(sec,3,new TGeoTranslation(+335*mm, 0*mm, 78.6*mm));
377 hmp->AddNode(sec,0,new TGeoTranslation(-335*mm,-433*mm, 78.6*mm)); hmp->AddNode(sec,1,new TGeoTranslation(+335*mm,-433*mm, 78.6*mm));
378 sec->AddNode(gap,1,new TGeoTranslation(0,0,0.*mm));
379 cel->AddNode(cat,1,new TGeoCombiTrans (0, 3.15*mm , -2.70*mm , rot)); //4 cathode wires
380 cel->AddNode(ano,1,new TGeoCombiTrans (0, 2.00*mm , -0.29*mm , rot)); //2 anod wires
381 cel->AddNode(cat,2,new TGeoCombiTrans (0, 1.05*mm , -2.70*mm , rot));
382 cel->AddNode(cat,3,new TGeoCombiTrans (0, -1.05*mm , -2.70*mm , rot));
383 cel->AddNode(ano,2,new TGeoCombiTrans (0, -2.00*mm , -0.29*mm , rot));
384 cel->AddNode(cat,4,new TGeoCombiTrans (0, -3.15*mm , -2.70*mm , rot));
385 cel->AddNode(pad,1,new TGeoTranslation(0, 0.00*mm , 2.25*mm)); //1 pad
386
387 hmp->AddNode(fr1,1,new TGeoTranslation(0.,0.,(80.+1.7)*mm+58.3*mm/2.));
388 fr1->AddNode(fr1up,1,new TGeoTranslation(0.,0.,(58.3*mm-20.00*mm)/2.));
389
390 fr1->AddNode(fr1perUpBig,0,new TGeoTranslation(0.,(1385-37-35)*mm/2.,(58.3*mm-20.00*2*mm-10.0*mm)/2.));
391 fr1->AddNode(fr1perUpSma,0,new TGeoTranslation((1426-37-35)*mm/2.,0.,(58.3*mm-20.00*2*mm-10.0*mm)/2.));
392 fr1->AddNode(fr1perUpBig,1,new TGeoTranslation(0.,-(1385-37-35)*mm/2.,(58.3*mm-20.00*2*mm-10.0*mm)/2.));
393 fr1->AddNode(fr1perUpSma,1,new TGeoTranslation(-(1426-37-35)*mm/2.,0.,(58.3*mm-20.00*2*mm-10.0*mm)/2.));
394
c4860469 395 fr1->AddNode(fr1perDowBig,0,new TGeoTranslation(0.,(1385-37)*mm/2.,(-58.3*mm+2.3*mm)/2.));
396 fr1->AddNode(fr1perDowSma,0,new TGeoTranslation((1426-37)*mm/2.,0.,(-58.3*mm+2.3*mm)/2.));
397 fr1->AddNode(fr1perDowBig,1,new TGeoTranslation(0.,-(1385-37)*mm/2.,(-58.3*mm+2.3*mm)/2.));
398 fr1->AddNode(fr1perDowSma,1,new TGeoTranslation(-(1426-37)*mm/2.,0.,(-58.3*mm+2.3*mm)/2.));
100711d2 399
400 fr1->AddNode(ppf,4,new TGeoTranslation(-335*mm,433*mm,(-58.3+38.3)*mm/2.)); fr1->AddNode(ppf,5,new TGeoTranslation(335*mm,433*mm,(-58.3+38.3)*mm/2.));
401 fr1->AddNode(ppf,2,new TGeoTranslation(-335*mm,0.,(-58.3+38.3)*mm/2.)); fr1->AddNode(ppf,3,new TGeoTranslation(335*mm,0.,(-58.3+38.3)*mm/2.));
402 fr1->AddNode(ppf,0,new TGeoTranslation(-335*mm,-433*mm,(-58.3+38.3)*mm/2.)); fr1->AddNode(ppf,1,new TGeoTranslation(335*mm,-433*mm,(-58.3+38.3)*mm/2.));
403
404 Double_t offsetx = 16.*mm, offsety = 34.*mm/2., interdistx = 48*mm+offsetx+0.6666*mm,interdisty = 19.*mm+2.*offsety;
405
406 //gassiplex implementation
407 //it is in 3 different volumes: Hrec (in Hcufoil)+Hext
408
409 TGeoVolume *gassipl2 = gGeoManager->MakeBox("Hgassipl2",csi,32.*mm/2,3.*mm/2.,1.*mm/2.); //in Hrect
410 TGeoVolume *gassipl3 = gGeoManager->MakeBox("Hgassipl3",csi,60.*mm/2,3.*mm/2.,19.*mm/2.); //in Hfr1upcard
411 TGeoVolume *gassipl4 = gGeoManager->MakeBox("Hgassipl4",csi,60.*mm/2,3.*mm/2.,91.*mm/2.); //in Hext (the big rectangle of the card is 110 mm long, 62 mm wide and 1.5 mm high)
412 TGeoVolume *busext = gGeoManager->MakeTubs("Hbusext",csi,29*mm,30*mm,40*mm/2.,0.,180); //in Hext
413 TGeoVolume *ext = new TGeoVolumeAssembly("Hext");
414
c4860469 415 rect->AddNode(gassipl2,1,new TGeoTranslation(0.,0.,0));
416
100711d2 417 for(Int_t hor=0; hor< 10; hor++){
418 for(Int_t vert=0; vert < 8; vert++){
419 cufoil->AddNode(rect,hor+vert*10,new TGeoTranslation(offsetx+ 48.*mm/2 + hor*interdistx-662.*mm/2,offsety + 19.*mm/2 + vert*interdisty-425.*mm/2.,0.));
100711d2 420 fr1upcard->AddNode(gassipl3,hor+vert*10,new TGeoTranslation(offsetx+ 48.*mm/2 + hor*interdistx-662.*mm/2,offsety + 19.*mm/2 + vert*interdisty-425.*mm/2.,0.));
421 ext->AddNode(gassipl4,hor+vert*10,new TGeoTranslation(offsetx+ 48.*mm/2 + hor*interdistx-662.*mm/2,offsety + 19.*mm/2 +
422 vert*interdisty-425.*mm/2.,0));
423 ext->AddNode(busext,hor+vert*10,new TGeoTranslation(offsetx+ 48.*mm/2 + hor*interdistx-662.*mm/2,offsety + 19.*mm/2 +
424 vert*interdisty-425.*mm/2 + 3.*mm/2.,0));
425 }
426 }
427
428 fr1up->AddNode(cufoil,4,new TGeoTranslation(-335*mm,433*mm,-20.0*mm/2+1.*mm/2)); fr1up->AddNode(cufoil,5,new TGeoTranslation(335*mm,433*mm,-20.0*mm/2+1.*mm/2));
429 fr1up->AddNode(cufoil,2,new TGeoTranslation(-335*mm,0,-20.0*mm/2+1.*mm/2)); fr1up->AddNode(cufoil,3,new TGeoTranslation(335*mm,0,-20.0*mm/2+1.*mm/2));
430 fr1up->AddNode(cufoil,0,new TGeoTranslation(-335*mm,-433*mm,-20.0*mm/2+1.*mm/2)); fr1up->AddNode(cufoil,1,new TGeoTranslation(335*mm,-433*mm,-20.0*mm/2+1.*mm/2));
431
432 fr1up->AddNode(fr1upcard,4,new TGeoTranslation(-335*mm,433*mm,1.*mm/2.)); fr1up->AddNode(fr1upcard,5,new TGeoTranslation(335*mm,433*mm,1.*mm/2.));
433 fr1up->AddNode(fr1upcard,2,new TGeoTranslation(-335*mm,0,1.*mm/2.)); fr1up->AddNode(fr1upcard,3,new TGeoTranslation(335*mm,0,1.*mm/2.));
434 fr1up->AddNode(fr1upcard,0,new TGeoTranslation(-335*mm,-433*mm,1.*mm/2)); fr1up->AddNode(fr1upcard,1,new TGeoTranslation(335*mm,-433*mm,1.*mm/2.));
435
436
437 hmp->AddNode(ext,4,new TGeoTranslation(-335*mm,+433*mm, (80.+1.7)*mm+58.3*mm+91*mm/2.)); hmp->AddNode(ext,5,new TGeoTranslation(+335*mm,+433*mm, (80.+1.7)*mm+58.3*mm+91*mm/2.));
438 hmp->AddNode(ext,2,new TGeoTranslation(-335*mm, 0*mm, (80.+1.7)*mm+58.3*mm+91*mm/2.)); hmp->AddNode(ext,3,new TGeoTranslation(+335*mm, 0*mm, (80.+1.7)*mm+58.3*mm+91*mm/2.));
439 hmp->AddNode(ext,0,new TGeoTranslation(-335*mm,-433*mm, (80.+1.7)*mm+58.3*mm+91*mm/2.)); hmp->AddNode(ext,1,new TGeoTranslation(+335*mm,-433*mm, (80.+1.7)*mm+58.3*mm+91*mm/2.));
440
441
442 hmp->AddNode(proxgap1,0,new TGeoTranslation(0.,0.,(9.-7.5)*mm/2.));//due to the TGeoVolumeAssembly definition the ch4 volume must be inserted around the collecting wires
c4860469 443 hmp->AddNode(proxgap2,0,new TGeoTranslation(0.,0.,(9+7.5 +34)*mm + (81.7-6.2-34.-9.-7.5)*mm/2.));// tot height(81.7) - Hsec - proxygap2 - top edge fr4 at (9+7.5) mm
100711d2 444
445// ^ Y single cell 5.5mm CH4 = 1*mm CsI + 4.45*mm CsI x cath +0.05*mm safety margin
446// | ______________________________
447// | | | ^ ||
448// | | 1.05mm ||
449// 2.2*mm| xxxxxxxxxxxxxxxxxxxxxxxxxxxx |-- 50um x || cat shift x=0mm , y= 3.15mm , z=-2.70mm
450// | | ||
451// | | ||
452// __ | .......................... | 2.1mm 20un . || ano shift x=0mm , y= 2.00mm , z=-0.29mm
453// | | ||
454// | | ||
455// | xxxxxxxxxxxxxxxxxxxxxxxxxxxx |-- x || cat shift x=0mm , y= 1.05mm , z=-2.70mm
456// | | ||
457// | | 8.4mm ||
458// 4*mm | | 2.1mm || pad shift x=0mm , y= 0.00mm , z=2.25*mm
459// | | ||
460// | | ||
461// | xxxxxxxxxxxxxxxxxxxxxxxxxxxx |-- x || cat shift x=0mm , y=-1.05mm , z=-2.70mm
462// | | ||
463// | | ||
464// __ | .......................... | 2.1mm . 2.04mm|| ano shift x=0mm , y=-2.00mm , z=-0.29mm
465// | | ||
466// | | ||
467// | xxxxxxxxxxxxxxxxxxxxxxxxxxxx |-- x 4.45mm || cat shift x=0mm , y=-3.15mm , z=-2.70mm
468// 2.2*mm| | ||
469// | | 1.05mm ||
470// |______________________________| v ||
471// < 8 mm >
472// ----->X ----->Z
473
474
475
476 ppf->AddNode(lar,0,new TGeoTranslation(-224.5*mm,-151.875*mm, 0.*mm));
477 ppf->AddNode(lar,1,new TGeoTranslation(-224.5*mm,- 50.625*mm, 0.*mm));
478 ppf->AddNode(lar,2,new TGeoTranslation(-224.5*mm,+ 50.625*mm, 0.*mm));
479 ppf->AddNode(lar,3,new TGeoTranslation(-224.5*mm,+151.875*mm, 0.*mm));
480 ppf->AddNode(lar,4,new TGeoTranslation(+224.5*mm,-151.875*mm, 0.*mm));
481 ppf->AddNode(lar,5,new TGeoTranslation(+224.5*mm,- 50.625*mm, 0.*mm));
482 ppf->AddNode(lar,6,new TGeoTranslation(+224.5*mm,+ 50.625*mm, 0.*mm));
483 ppf->AddNode(lar,7,new TGeoTranslation(+224.5*mm,+151.875*mm, 0.*mm));
484 ppf->AddNode(smo,0,new TGeoTranslation(- 65.0*mm,-151.875*mm, 0.*mm));
485 ppf->AddNode(smo,1,new TGeoTranslation(- 65.0*mm,- 50.625*mm, 0.*mm));
486 ppf->AddNode(smo,2,new TGeoTranslation(- 65.0*mm,+ 50.625*mm, 0.*mm));
487 ppf->AddNode(smo,3,new TGeoTranslation(- 65.0*mm,+151.875*mm, 0.*mm));
488 ppf->AddNode(smo,4,new TGeoTranslation(+ 65.0*mm,-151.875*mm, 0.*mm));
489 ppf->AddNode(smo,5,new TGeoTranslation(+ 65.0*mm,- 50.625*mm, 0.*mm));
490 ppf->AddNode(smo,6,new TGeoTranslation(+ 65.0*mm,+ 50.625*mm, 0.*mm));
491 ppf->AddNode(smo,7,new TGeoTranslation(+ 65.0*mm,+151.875*mm, 0.*mm));
492
493
c4860469 494//hmp->AddNode(fr3,1,new TGeoTranslation(0.,0.,(81.7-29.)*mm-34.*mm/2));
495 hmp->AddNode(fr3,1,new TGeoTranslation(0.,0.,(9.+7.5)*mm+34.*mm/2));
100711d2 496 fr3->AddNode( fr3up,1, new TGeoTranslation(0., 0., 7*mm));
497 fr3->AddNode(fr3down,1,new TGeoTranslation(0., 0., -10*mm));
498
499return hmp;
500
501}//CreateChamber()
502//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
503void AliHMPIDv3::Init()
504{
505// This method defines ID for sensitive volumes, i.e. such geometry volumes for which there are if(gMC->CurrentVolID()==XXX)
506// statements in StepManager()
507// Arguments: none
508// Returns: none
509 AliDebug(1,"Start v2 HMPID.");
dde0a601 510 InitProperties();
100711d2 511 AliDebug(1,"Stop v2 HMPID.");
512}
513//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
514void AliHMPIDv3::DefineOpticalProperties()
515{
dde0a601 516 AliDebug(1,"");
517
100711d2 518// Optical properties definition.
519 const Int_t kNbins=30; //number of photon energy points
520 Float_t emin=5.5,emax=8.5; //Photon energy range,[eV]
521 Float_t aEckov [kNbins];
522 Double_t dEckov [kNbins];
523 Float_t aAbsRad[kNbins], aAbsWin[kNbins], aAbsGap[kNbins], aAbsMet[kNbins];
524 Float_t aIdxRad[kNbins], aIdxWin[kNbins], aIdxGap[kNbins], aIdxMet[kNbins], aIdxPc[kNbins];
525 Float_t aQeAll [kNbins], aQePc [kNbins];
526 Double_t dReflMet[kNbins], dQePc[kNbins];
527
528 TF2 *pRaIF=new TF2("HidxRad","sqrt(1+0.554*(1239.84/x)^2/((1239.84/x)^2-5769)-0.0005*(y-20))" ,emin,emax,0,50); //DiMauro mail temp 0-50 degrees C
529 TF1 *pWiIF=new TF1("HidxWin","sqrt(1+46.411/(10.666*10.666-x*x)+228.71/(18.125*18.125-x*x))" ,emin,emax); //SiO2 idx TDR p.35
530 TF1 *pGaIF=new TF1("HidxGap","1+0.12489e-6/(2.62e-4 - x*x/1239.84/1239.84)" ,emin,emax); //?????? from where
531
532 TF1 *pRaAF=new TF1("HabsRad","(x<7.8)*(gaus+gaus(3))+(x>=7.8)*0.0001" ,emin,emax); //fit from DiMauro data 28.10.03
533 pRaAF->SetParameters(3.20491e16,-0.00917890,0.742402,3035.37,4.81171,0.626309);
534 TF1 *pWiAF=new TF1("HabsWin","(x<8.2)*(818.8638-301.0436*x+36.89642*x*x-1.507555*x*x*x)+(x>=8.2)*0.0001" ,emin,emax); //fit from DiMauro data 28.10.03
535 TF1 *pGaAF=new TF1("HabsGap","(x<7.75)*6512.399+(x>=7.75)*3.90743e-2/(-1.655279e-1+6.307392e-2*x-8.011441e-3*x*x+3.392126e-4*x*x*x)",emin,emax); //????? from where
536
537 TF1 *pQeF =new TF1("Hqe" ,"0+(x>6.07267)*0.344811*(1-exp(-1.29730*(x-6.07267)))" ,emin,emax); //fit from DiMauro data 28.10.03
538
539 TString title=GetTitle();
540 Bool_t isFlatIdx=title.Contains("FlatIdx");
541
542 for(Int_t i=0;i<kNbins;i++){
543 Float_t eV=emin+0.1*i; //Ckov energy in eV
544 aEckov [i] =1e-9*eV; //Ckov energy in GeV
545 dEckov [i] = aEckov[i];
546 aAbsRad[i]=pRaAF->Eval(eV); (isFlatIdx)? aIdxRad[i]=1.292: aIdxRad[i]=pRaIF->Eval(eV,20);
547 aAbsWin[i]=pWiAF->Eval(eV); aIdxWin[i]=pWiIF->Eval(eV);
548 aAbsGap[i]=pGaAF->Eval(eV); aIdxGap[i]=pGaIF->Eval(eV);
549 aQeAll[i] =1; //QE for all other materials except for PC must be 1.
550 aAbsMet[i] =0.0001; aIdxMet[i]=0; //metal ref idx must be 0 in order to reflect photon
551 aIdxPc [i]=1; aQePc [i]=pQeF->Eval(eV); //PC ref idx must be 1 in order to apply photon to QE conversion
552 dQePc [i]=pQeF->Eval(eV);
553 dReflMet[i] = 0.; // no reflection on the surface of the pc (?)
554 }
555 gMC->SetCerenkov((*fIdtmed)[kC6F14] , kNbins, aEckov, aAbsRad , aQeAll , aIdxRad );
556 gMC->SetCerenkov((*fIdtmed)[kSiO2] , kNbins, aEckov, aAbsWin , aQeAll , aIdxWin );
557 gMC->SetCerenkov((*fIdtmed)[kCH4] , kNbins, aEckov, aAbsGap , aQeAll , aIdxGap );
558 gMC->SetCerenkov((*fIdtmed)[kCu] , kNbins, aEckov, aAbsMet , aQeAll , aIdxMet );
559 gMC->SetCerenkov((*fIdtmed)[kW] , kNbins, aEckov, aAbsMet , aQeAll , aIdxMet ); //n=0 means reflect photons
560 gMC->SetCerenkov((*fIdtmed)[kCsI] , kNbins, aEckov, aAbsMet , aQePc , aIdxPc ); //n=1 means convert photons
561 gMC->SetCerenkov((*fIdtmed)[kAl] , kNbins, aEckov, aAbsMet , aQeAll , aIdxMet );
562
563 // Define a skin surface for the photocatode to enable 'detection' in G4
564 gMC->DefineOpSurface("surfPc", kGlisur /*kUnified*/,kDielectric_metal,kPolished, 0.);
565 gMC->SetMaterialProperty("surfPc", "EFFICIENCY", kNbins, dEckov, dQePc);
566 gMC->SetMaterialProperty("surfPc", "REFLECTIVITY", kNbins, dEckov, dReflMet);
567 gMC->SetSkinSurface("skinPc", "Rpc", "surfPc");
568
569 delete pRaAF;delete pWiAF;delete pGaAF; delete pRaIF; delete pWiIF; delete pGaIF; delete pQeF;
570}
571//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
572Bool_t AliHMPIDv3::IsLostByFresnel()
573{
574// Calculate probability for the photon to be lost by Fresnel reflection.
575 TLorentzVector p4;
576 Double_t mom[3],localMom[3];
577 gMC->TrackMomentum(p4); mom[0]=p4(1); mom[1]=p4(2); mom[2]=p4(3);
578 localMom[0]=0; localMom[1]=0; localMom[2]=0;
579 gMC->Gmtod(mom,localMom,2);
580 Double_t localTc = localMom[0]*localMom[0]+localMom[2]*localMom[2];
581 Double_t localTheta = TMath::ATan2(TMath::Sqrt(localTc),localMom[1]);
582 Double_t cotheta = TMath::Abs(TMath::Cos(localTheta));
583 if(gMC->GetRandom()->Rndm() < Fresnel(p4.E()*1e9,cotheta,1)){
584 AliDebug(1,"Photon lost");
585 return kTRUE;
586 }else
587 return kFALSE;
588}//IsLostByFresnel()
589//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
590void AliHMPIDv3::GenFee(Float_t qtot)
591{
592// Generate FeedBack photons for the current particle. To be invoked from StepManager().
593// eloss=0 means photon so only pulse height distribution is to be analysed.
594 TLorentzVector x4;
595 gMC->TrackPosition(x4);
596 Int_t iNphotons=gMC->GetRandom()->Poisson(0.02*qtot); //# of feedback photons is proportional to the charge of hit
597 AliDebug(1,Form("N photons=%i",iNphotons));
598 Int_t j;
599 Float_t cthf, phif, enfp = 0, sthf, e1[3], e2[3], e3[3], vmod, uswop,dir[3], phi,pol[3], mom[4];
600//Generate photons
601 for(Int_t i=0;i<iNphotons;i++){//feedbacks loop
602 Double_t ranf[2];
603 gMC->GetRandom()->RndmArray(2,ranf); //Sample direction
604 cthf=ranf[0]*2-1.0;
605 if(cthf<0) continue;
60e55aee 606 sthf = TMath::Sqrt((1. - cthf) * (1. + cthf));
100711d2 607 phif = ranf[1] * 2 * TMath::Pi();
608
609 if(Double_t randomNumber=gMC->GetRandom()->Rndm()<=0.57)
610 enfp = 7.5e-9;
611 else if(randomNumber<=0.7)
612 enfp = 6.4e-9;
613 else
614 enfp = 7.9e-9;
615
616
617 dir[0] = sthf * TMath::Sin(phif); dir[1] = cthf; dir[2] = sthf * TMath::Cos(phif);
618 gMC->Gdtom(dir, mom, 2);
619 mom[0]*=enfp; mom[1]*=enfp; mom[2]*=enfp;
620 mom[3] = TMath::Sqrt(mom[0]*mom[0]+mom[1]*mom[1]+mom[2]*mom[2]);
621
622 // Polarisation
623 e1[0]= 0; e1[1]=-dir[2]; e1[2]= dir[1];
624 e2[0]=-dir[1]; e2[1]= dir[0]; e2[2]= 0;
625 e3[0]= dir[1]; e3[1]= 0; e3[2]=-dir[0];
626
627 vmod=0;
628 for(j=0;j<3;j++) vmod+=e1[j]*e1[j];
629 if (!vmod) for(j=0;j<3;j++) {
630 uswop=e1[j];
631 e1[j]=e3[j];
632 e3[j]=uswop;
633 }
634 vmod=0;
635 for(j=0;j<3;j++) vmod+=e2[j]*e2[j];
636 if (!vmod) for(j=0;j<3;j++) {
637 uswop=e2[j];
638 e2[j]=e3[j];
639 e3[j]=uswop;
640 }
641
642 vmod=0; for(j=0;j<3;j++) vmod+=e1[j]*e1[j]; vmod=TMath::Sqrt(1/vmod); for(j=0;j<3;j++) e1[j]*=vmod;
643 vmod=0; for(j=0;j<3;j++) vmod+=e2[j]*e2[j]; vmod=TMath::Sqrt(1/vmod); for(j=0;j<3;j++) e2[j]*=vmod;
644
645 phi = gMC->GetRandom()->Rndm()* 2 * TMath::Pi();
646 for(j=0;j<3;j++) pol[j]=e1[j]*TMath::Sin(phi)+e2[j]*TMath::Cos(phi);
647 gMC->Gdtom(pol, pol, 2);
648 Int_t outputNtracksStored;
649 gAlice->GetMCApp()->PushTrack(1, //transport
650 gAlice->GetMCApp()->GetCurrentTrackNumber(),//parent track
651 50000051, //PID
652 mom[0],mom[1],mom[2],mom[3], //track momentum
653 x4.X(),x4.Y(),x4.Z(),x4.T(), //track origin
654 pol[0],pol[1],pol[2], //polarization
655 kPFeedBackPhoton, //process ID
656 outputNtracksStored, //on return how many new photons stored on stack
657 1.0); //weight
658 }//feedbacks loop
659 AliDebug(1,"Stop.");
660}//GenerateFeedbacks()
661//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
662void AliHMPIDv3::Hits2SDigits()
663{
664// Interface method ivoked from AliSimulation to create a list of sdigits corresponding to list of hits. Every hit generates one or more sdigits.
665// Arguments: none
666// Returns: none
667 AliDebug(1,"Start.");
668 for(Int_t iEvt=0;iEvt < GetLoader()->GetRunLoader()->GetNumberOfEvents();iEvt++){ //events loop
669 GetLoader()->GetRunLoader()->GetEvent(iEvt); //get next event
670
671 if(!GetLoader()->TreeH()) {GetLoader()->LoadHits(); }
672 if(!GetLoader()->TreeS()) {GetLoader()->MakeTree("S"); MakeBranch("S");}//to
673
674 for(Int_t iEnt=0;iEnt<GetLoader()->TreeH()->GetEntries();iEnt++){//prims loop
675 GetLoader()->TreeH()->GetEntry(iEnt);
676 Hit2Sdi(Hits(),SdiLst());
677 }//prims loop
678 GetLoader()->TreeS()->Fill();
679 GetLoader()->WriteSDigits("OVERWRITE");
680 SdiReset();
681 }//events loop
682 GetLoader()->UnloadHits();
683 GetLoader()->UnloadSDigits();
684 AliDebug(1,"Stop.");
685}//Hits2SDigits()
686//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
687void AliHMPIDv3::Hit2Sdi(TClonesArray *pHitLst,TClonesArray *pSdiLst)
688{
689// Converts list of hits to list of sdigits.
690// Arguments: pHitLst - list of hits provided not empty
691// pSDigLst - list of sdigits where to store the results
692// Returns: none
693 for(Int_t iHit=0;iHit<pHitLst->GetEntries();iHit++){ //hits loop
694 AliHMPIDHit *pHit=(AliHMPIDHit*)pHitLst->At(iHit); //get pointer to current hit
695 pHit->Hit2Sdi(pSdiLst); //convert this hit to list of sdigits
696 }//hits loop loop
697}//Hits2Sdi()
698//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
699void AliHMPIDv3::Digits2Raw()
700{
701// Interface method invoked by AliSimulation to create raw data streams from digits. Events loop is done in AliSimulation
702// Arguments: none
703// Returns: none
704 AliDebug(1,"Start.");
705 GetLoader()->LoadDigits();
706 TTree * treeD = GetLoader()->TreeD();
707 if(!treeD) {
708 AliError("No digits tree!");
709 return;
710 }
711 treeD->GetEntry(0);
712
713
714 AliHMPIDRawStream *pRS=0x0;
715 pRS->WriteRaw(DigLst());
716
717 GetLoader()->UnloadDigits();
718 AliDebug(1,"Stop.");
719}//Digits2Raw()
720//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
721Float_t AliHMPIDv3::Fresnel(Float_t ene,Float_t pdoti, Bool_t pola)
722{
723// Correction for Fresnel ???????????
724// Arguments: ene - photon energy [GeV],
725// PDOTI=COS(INC.ANG.), PDOTR=COS(POL.PLANE ROT.ANG.)
726// Returns:
727 Float_t en[36] = {5.0,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8,5.9,6.0,6.1,6.2,
728 6.3,6.4,6.5,6.6,6.7,6.8,6.9,7.0,7.1,7.2,7.3,7.4,7.5,7.6,7.7,
729 7.8,7.9,8.0,8.1,8.2,8.3,8.4,8.5};
730 Float_t csin[36] = {2.14,2.21,2.33,2.48,2.76,2.97,2.99,2.59,2.81,3.05,
731 2.86,2.53,2.55,2.66,2.79,2.96,3.18,3.05,2.84,2.81,2.38,2.11,
732 2.01,2.13,2.39,2.73,3.08,3.15,2.95,2.73,2.56,2.41,2.12,1.95,
733 1.72,1.53};
734 Float_t csik[36] = {0.,0.,0.,0.,0.,0.196,0.408,0.208,0.118,0.49,0.784,0.543,
735 0.424,0.404,0.371,0.514,0.922,1.102,1.139,1.376,1.461,1.253,0.878,
736 0.69,0.612,0.649,0.824,1.347,1.571,1.678,1.763,1.857,1.824,1.824,
737 1.714,1.498};
738 Float_t xe=ene;
739 Int_t j=Int_t(xe*10)-49;
740 Float_t cn=csin[j]+((csin[j+1]-csin[j])/0.1)*(xe-en[j]);
741 Float_t ck=csik[j]+((csik[j+1]-csik[j])/0.1)*(xe-en[j]);
742
743 //FORMULAE FROM HANDBOOK OF OPTICS, 33.23 OR
744 //W.R. HUNTER, J.O.S.A. 54 (1964),15 , J.O.S.A. 55(1965),1197
745
60e55aee 746 Float_t sinin=TMath::Sqrt((1.-pdoti)*(1.+pdoti));
100711d2 747 Float_t tanin=sinin/pdoti;
748
749 Float_t c1=cn*cn-ck*ck-sinin*sinin;
750 Float_t c2=4*cn*cn*ck*ck;
751 Float_t aO=TMath::Sqrt(0.5*(TMath::Sqrt(c1*c1+c2)+c1));
752 Float_t b2=0.5*(TMath::Sqrt(c1*c1+c2)-c1);
753
754 Float_t rs=((aO-pdoti)*(aO-pdoti)+b2)/((aO+pdoti)*(aO+pdoti)+b2);
755 Float_t rp=rs*((aO-sinin*tanin)*(aO-sinin*tanin)+b2)/((aO+sinin*tanin)*(aO+sinin*tanin)+b2);
756
757
758 //CORRECTION FACTOR FOR SURFACE ROUGHNESS
759 //B.J. STAGG APPLIED OPTICS, 30(1991),4113
760
761 Float_t sigraf=18.;
762 Float_t lamb=1240/ene;
763 Float_t fresn;
764
765 Float_t rO=TMath::Exp(-(4*TMath::Pi()*pdoti*sigraf/lamb)*(4*TMath::Pi()*pdoti*sigraf/lamb));
766
767 if(pola)
768 {
769 Float_t pdotr=0.8; //DEGREE OF POLARIZATION : 1->P , -1->S
770 fresn=0.5*(rp*(1+pdotr)+rs*(1-pdotr));
771 }
772 else
773 fresn=0.5*(rp+rs);
774
775 fresn = fresn*rO;
776 return fresn;
777}//Fresnel()
778//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
779void AliHMPIDv3::Print(Option_t *option)const
780{
781// Debug printout
782 TObject::Print(option);
783}//void AliHMPID::Print(Option_t *option)const
784//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
785
786Bool_t AliHMPIDv3::Raw2SDigits(AliRawReader *pRR)
787{
788// Arguments: pRR- raw reader
789// Returns: kTRUE on success (currently ignored in AliSimulation::ConvertRaw2SDigits())
790//AliHMPIDDigit sdi; //tmp sdigit, raw digit will be converted to it
791
792 if(!GetLoader()->TreeS()) {MakeTree("S"); MakeBranch("S");}
793
794 TClonesArray *pSdiLst=SdiLst(); Int_t iSdiCnt=0; //tmp list of sdigits for all chambers
795 AliHMPIDRawStream stream(pRR);
796 while(stream.Next())
797 {
798 for(Int_t iPad=0;iPad<stream.GetNPads();iPad++) {
799 AliHMPIDDigit sdi(stream.GetPadArray()[iPad],stream.GetChargeArray()[iPad]);
800 new((*pSdiLst)[iSdiCnt++]) AliHMPIDDigit(sdi); //add this digit to the tmp list
801 }
802 }
803
804 GetLoader()->TreeS()->Fill(); GetLoader()->WriteSDigits("OVERWRITE");//write out sdigits
805 SdiReset();
806 return kTRUE;
807
808}//Raw2SDigits
809
810//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
811void AliHMPIDv3::StepCount()
812{
813// Count number of ckovs created
814}
815//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
816void AliHMPIDv3::StepHistory()
817{
818// This methode is invoked from StepManager() in order to print out
819 static Int_t iStepN;
820 const char *sParticle;
821 switch(gMC->TrackPid()){
822 case kProton: sParticle="PROTON" ;break;
823 case kNeutron: sParticle="neutron" ;break;
824 case kGamma: sParticle="gamma" ;break;
825 case 50000050: sParticle="CKOV" ;break;
826 case kPi0: sParticle="Pi0" ;break;
827 case kPiPlus: sParticle="Pi+" ;break;
828 case kPiMinus: sParticle="Pi-" ;break;
829 case kElectron: sParticle="electron" ;break;
830 default: sParticle="not known" ;break;
831 }
832
833 TString flag="fanny combination";
45118213 834 if(gMC->IsTrackAlive()) {
835 if(gMC->IsTrackEntering()) flag="enters to";
836 else if(gMC->IsTrackExiting()) flag="exits from";
837 else if(gMC->IsTrackInside()) flag="inside";
838 } else {
839 if(gMC->IsTrackStop()) flag="stopped in";
840 }
100711d2 841
842 Int_t vid=0,copy=0;
843 TString path=gMC->CurrentVolName(); path.Prepend("-");path.Prepend(gMC->CurrentVolOffName(1));//current volume and his mother are always there
844 vid=gMC->CurrentVolOffID(2,copy); if(vid) {path.Prepend("-");path.Prepend(gMC->VolName(vid));}
845 vid=gMC->CurrentVolOffID(3,copy); if(vid) {path.Prepend("-");path.Prepend(gMC->VolName(vid));}
846
847
848 Printf("Step %i: %s (%i) %s %s m=%.6f GeV q=%.1f dEdX=%.4f Etot=%.4f",iStepN,sParticle,gMC->TrackPid(),flag.Data(),path.Data(),gMC->TrackMass(),gMC->TrackCharge(),gMC->Edep()*1e9,gMC->Etot());
849
850 Double_t gMcTrackPos[3]; gMC->TrackPosition(gMcTrackPos[0],gMcTrackPos[1],gMcTrackPos[2]);
851 Double_t gMcTrackPosLoc[3]; gMC->Gmtod(gMcTrackPos,gMcTrackPosLoc,1);
852 Printf("gMC Track Position (MARS) x: %5.3lf, y: %5.3lf, z: %5.3lf (r: %5.3lf) ---> (LOC) x: %5.3f, y: %5.3f, z: %5.3f",gMcTrackPos[0],gMcTrackPos[1],gMcTrackPos[2],TMath::Sqrt(gMcTrackPos[0]*gMcTrackPos[0]+gMcTrackPos[1]*gMcTrackPos[1]+gMcTrackPos[2]*gMcTrackPos[2]),gMcTrackPosLoc[0],gMcTrackPosLoc[1],gMcTrackPosLoc[2]);
853
854
855
856 Printf("Step %i: tid=%i flags alive=%i disap=%i enter=%i exit=%i inside=%i out=%i stop=%i new=%i",
857 iStepN, gAlice->GetMCApp()->GetCurrentTrackNumber(),
858 gMC->IsTrackAlive(), gMC->IsTrackDisappeared(),gMC->IsTrackEntering(), gMC->IsTrackExiting(),
859 gMC->IsTrackInside(),gMC->IsTrackOut(), gMC->IsTrackStop(), gMC->IsNewTrack());
860
861 Float_t a,z,den,rad,abs; a=z=den=rad=abs=-1;
862 Int_t mid=gMC->CurrentMaterial(a,z,den,rad,abs);
863 Printf("Step %i: mid=%i a=%7.2f z=%7.2f den=%9.4f rad=%9.2f abs=%9.2f\n\n",iStepN,mid,a,z,den,rad,abs);
864
865 TArrayI proc; gMC->StepProcesses(proc);
866 Printf("Processes in this step:");
867 for ( int i = 0 ; i < proc.GetSize(); i++)
868 {
869 Printf("%s",TMCProcessName[proc.At(i)]);
870 }
871 Printf("End process list");
872
873 iStepN++;
874}//StepHistory()
875//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
876void AliHMPIDv3::StepManager()
877{
878// Full Step Manager.
879// Arguments: none
880// Returns: none
881// StepHistory(); return; //uncomment to print tracks history
882 // StepCount(); return; //uncomment to count photons
883
884 TString volname = gMC->CurrentVolName();
885
886//Treat photons
887 if((gMC->TrackPid()==50000050||gMC->TrackPid()==50000051)&&volname.Contains("Hpad")){ //photon (Ckov or feedback) hits on module PC (Hpad)
888 if(gMC->Edep()>0){ //photon survided QE test i.e. produces electron
889 if(IsLostByFresnel()){ gMC->StopTrack(); return;} //photon lost due to fersnel reflection on PC
890 Int_t tid= gMC->GetStack()->GetCurrentTrackNumber(); //take TID
891 Int_t pid= gMC->TrackPid(); //take PID
892 Float_t etot= gMC->Etot(); //total hpoton energy, [GeV]
893 Double_t x[3]; gMC->TrackPosition(x[0],x[1],x[2]); //take MARS position at entrance to PC
894 TString tmpname = volname; tmpname.Remove(0,4); Int_t idch = tmpname.Atoi(); //retrieve the chamber number
895 Float_t xl,yl; AliHMPIDParam::Instance()->Mars2Lors(idch,x,xl,yl); //take LORS position
896 new((*fHits)[fNhits++])AliHMPIDHit(idch,etot,pid,tid,xl,yl,x); //HIT for photon, position at P, etot will be set to Q
897 if(fDoFeed) GenFee(etot); //generate feedback photons etot is modified in hit ctor to Q of hit
898 }//photon hit PC and DE >0
899 }//photon hit PC
900
901
902 //Treat charged particles
903 static Float_t eloss; //need to store mip parameters between different steps
904 static Double_t in[3];
905
906 if(gMC->IsTrackEntering() && gMC->TrackCharge() && volname.Contains("Hpad")) //Trackref stored when entering in the pad volume
907 AddTrackReference(gMC->GetStack()->GetCurrentTrackNumber(), AliTrackReference::kHMPID); //for acceptance calculations
908
909
910 if(gMC->TrackCharge() && volname.Contains("Hcel")){ //charged particle in amplification gap (Hcel)
911 if(gMC->IsTrackEntering()||gMC->IsNewTrack()) { //entering or newly created
912 eloss=0; //reset Eloss collector
913 gMC->TrackPosition(in[0],in[1],in[2]); //take position at the entrance
914 }else if(gMC->IsTrackExiting()||gMC->IsTrackStop()||gMC->IsTrackDisappeared()){ //exiting or disappeared
915 eloss +=gMC->Edep(); //take into account last step Eloss
916 Int_t tid= gMC->GetStack()->GetCurrentTrackNumber(); //take TID
917 Int_t pid= gMC->TrackPid(); //take PID
918 Double_t out[3]; gMC->TrackPosition(out[0],out[1],out[2]); //take MARS position at exit
919 out[0]=0.5*(out[0]+in[0]); //
920 out[1]=0.5*(out[1]+in[1]); //take hit position at the anod plane
921 out[2]=0.5*(out[2]+in[2]);
922 TString tmpname = volname; tmpname.Remove(0,4); Int_t idch = tmpname.Atoi(); //retrieve the chamber number
923 Float_t xl,yl;AliHMPIDParam::Instance()->Mars2Lors(idch,out,xl,yl); //take LORS position
3e3bfa9b 924 if(eloss>0) {
925 new((*fHits)[fNhits++])AliHMPIDHit(idch,eloss,pid,tid,xl,yl,out); //HIT for MIP, position near anod plane, eloss will be set to Q
926 if(fDoFeed) GenFee(eloss); //generate feedback photons
927 }
100711d2 928 }else //just going inside
929 eloss += gMC->Edep(); //collect this step eloss
930 }//MIP in GAP
931
932}//StepManager()
933//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
934void AliHMPIDv3::TestPoint(Int_t ch,Float_t x,Float_t y)
935{
936// Utility method to check the validity of geometry by poviding some crucial points
937// Arguments: ch,x,y- crucial point definition (cm) in LORS
938// Returns: none
939 Double_t mars[3];
940 AliHMPIDParam::Instance()->Lors2Mars(ch,x,y,mars);
941 Printf("(ch=%i,locX=%.2f,locY=%.2f) %s",ch,x,y,gGeoManager->FindNode(mars[0],mars[1],mars[2])->GetName());
942}//TestPoint()
943//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
944void AliHMPIDv3::TestGeom()
945{
946//
947// Test method to check geometry
948//
949 //TGeoManager::Import("misaligned_geometry.root");
950 TGeoManager::Import("geometry.root");
951 for(Int_t ch=AliHMPIDParam::kMinCh;ch<=AliHMPIDParam::kMaxCh;ch++)
952 TestPoint(ch,0,0);
953}//TestPoint()
954//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
955
956void AliHMPIDv3::IdealPosition(Int_t iCh,TGeoHMatrix *pMatrix) //ideal position of given chamber
957{
958// Construct ideal position matrix for a given chamber
959// Arguments: iCh- chamber ID; pMatrix- pointer to precreated unity matrix where to store the results
960// Returns: none
961 const Double_t kAngHor=19.5; // horizontal angle between chambers 19.5 grad
962 const Double_t kAngVer=20; // vertical angle between chambers 20 grad
963 const Double_t kAngCom=30; // common HMPID rotation with respect to x axis 30 grad
964 const Double_t kTrans[3]={490,0,0}; // center of the chamber is on window-gap surface
965 pMatrix->RotateY(90); // rotate around y since initial position is in XY plane -> now in YZ plane
966 pMatrix->SetTranslation(kTrans); // now plane in YZ is shifted along x
967 switch(iCh){
968 case 0: pMatrix->RotateY(kAngHor); pMatrix->RotateZ(-kAngVer); break; //right and down
969 case 1: pMatrix->RotateZ(-kAngVer); break; //down
970 case 2: pMatrix->RotateY(kAngHor); break; //right
971 case 3: break; //no rotation
972 case 4: pMatrix->RotateY(-kAngHor); break; //left
973 case 5: pMatrix->RotateZ(kAngVer); break; //up
974 case 6: pMatrix->RotateY(-kAngHor); pMatrix->RotateZ(kAngVer); break; //left and up
975 }
976 pMatrix->RotateZ(kAngCom); //apply common rotation in XY plane
977}
978
979
980void AliHMPIDv3::IdealPositionCradle(Int_t iCh,TGeoHMatrix *pMatrix) //ideal position of given one module of the cradle
981{
982// Construct ideal position matrix for a given module cradle
983// Arguments: iCh- chamber ID; pMatrix- pointer to precreated unity matrix where to store the results
984// Returns: none
985 const Double_t kAngHor=19.5; // horizontal angle between chambers 19.5 grad
986 const Double_t kAngVer=20; // vertical angle between chambers 20 grad
987 const Double_t kAngCom=30; // common HMPID rotation with respect to x axis 30 grad
988 const Double_t kTrans[3]={423.+ 29,0,67}; // z-center of the cradle module
989 pMatrix->RotateY(90); // rotate around y since initial position is in XY plane -> now in YZ plane
990 pMatrix->SetTranslation(kTrans); // now plane in YZ is shifted along x
991 switch(iCh){
992 case 0: pMatrix->RotateY(kAngHor); pMatrix->RotateZ(-kAngVer); break; //right and down
993 case 1: pMatrix->RotateZ(-kAngVer); break; //down
994 case 2: pMatrix->RotateY(kAngHor); break; //right
995 case 3: break; //no rotation
996 case 4: pMatrix->RotateY(-kAngHor); break; //left
997 case 5: pMatrix->RotateZ(kAngVer); break; //up
998 case 6: pMatrix->RotateY(-kAngHor); pMatrix->RotateZ(kAngVer); break; //left and up
999 }
1000 pMatrix->RotateZ(kAngCom); //apply common rotation in XY plane
1001}
1002
1003
1004
1005TGeoVolume* AliHMPIDv3::CreateCradle()
1006{
1007
1008//Method that builds the Cradle geometry
1009//according to the base topology created
1010//in CradleBaseVolume(...)
1011
1012 Double_t mm = 0.1;
1013
1014 Double_t params[10]={0.5,10.,24.,-1,5.2,1.5,3.5,8.5,3.8,0.};
1015 TGeoMedium *med =gGeoManager->GetMedium("HMPID_Al");
1016 TGeoVolume *cradle=new TGeoVolumeAssembly("Hcradle");
1017
c4860469 1018 //Double_t baselong[7]={6037*mm-2*60*mm, 6037*mm-2*60*mm,60*mm,0.,100*mm,10*mm,10*mm};//2CRE2112P3
1019 Double_t baselong[7]={6037*mm-2*100*mm, 6037*mm-2*100*mm,60*mm,0.,100*mm,10*mm,10*mm};//2CRE2112P3
100711d2 1020 TGeoVolume *lbase = CradleBaseVolume(med,baselong,"cradleLbase");
1021 lbase->SetLineColor(kGray);
1022
1023 Double_t baseshort[7]={1288.*mm+2*100*mm, 1288.*mm+2*100*mm,60*mm,0.,100*mm,10*mm,10*mm};//2CRE2112P3
1024 TGeoVolume *sbase = CradleBaseVolume(med,baseshort,"cradleSbase");
1025 sbase->SetLineColor(kGray);
1026
1027 //one side
1028
1029 Double_t height = 30.*mm; //30 = 2*(1488/2-729) (2CRE2112P3)
1030 Double_t tubeheight = 50.*mm; Double_t heightred = 5.*mm; Double_t zred = 5.*mm;
1031 Double_t oneshift = tubeheight/TMath::Tan(TMath::DegToRad()*20.)+(1458.-35)*mm/2 - (1607-35)*mm/2;
c4860469 1032 Double_t linclined[7] = {1458.*mm-params[6]-0.5,1607.*mm-params[6]-0.5,tubeheight,oneshift, height ,heightred,zred}; //3.5 is for not correct measurements in 2CRE2112P3<=> 597!=inclined*sin(20)
100711d2 1033 TGeoVolume *inclin = CradleBaseVolume(med,linclined,"inclinedbar");
1034 inclin->SetLineColor(kGray);
1035 Double_t lhorizontal[7] = {1641.36*mm+params[7],1659.*mm+params[7],tubeheight,0, height ,heightred,zred};
1036 TGeoVolume *horiz = CradleBaseVolume(med,lhorizontal,"horizontalbar");
1037 horiz->SetLineColor(kGray);
1038
1039 //inner bars, they are named as the numbering in 2CRE2112P3
c4860469 1040 Double_t fourshift = tubeheight/TMath::Tan(TMath::DegToRad()*55.);
1041 Double_t lfour[7] = {592*mm,592*mm,tubeheight,fourshift,height,heightred,zred};
100711d2 1042 TGeoVolume *four = CradleBaseVolume(med,lfour,"bar4");
1043 four->SetLineColor(kGray);
1044
1045 Double_t fiveshift = tubeheight/TMath::Tan(TMath::DegToRad()*75);
c4860469 1046 Double_t lfive[7] = {500.*mm,500.*mm,tubeheight,fiveshift,height,heightred,zred};
100711d2 1047 TGeoVolume *five = CradleBaseVolume(med,lfive,"bar5");
1048 five->SetLineColor(kGray);
1049
c4860469 1050 Double_t sixshift = tubeheight/TMath::Tan(TMath::DegToRad()*55)+459*mm/2-480*mm/2;
1051 Double_t lsix[7] = {456*mm,477*mm,tubeheight,sixshift,height,heightred,zred};
100711d2 1052 TGeoVolume *six = CradleBaseVolume(med,lsix,"bar6");
1053 six->SetLineColor(kGray);
1054
1055 Double_t sevenshift = tubeheight/TMath::Tan(TMath::DegToRad()*50)+472*mm/2-429.*mm/2;
1056 Double_t lseven[7] = {429*mm,472*mm,tubeheight,sevenshift,height,heightred,zred};
1057 TGeoVolume *seven = CradleBaseVolume(med,lseven,"bar7");
1058 seven->SetLineColor(kGray);
1059
1060 Double_t eightshift = tubeheight/TMath::Tan(TMath::DegToRad()*30)+244.*mm/2-200.*mm/2 -3;
1061 Double_t leight[7] = {200.*mm,244.*mm,tubeheight,eightshift,height,heightred,zred};
1062 TGeoVolume *eight = CradleBaseVolume(med,leight,"bar8");
1063 eight->SetLineColor(kGray);
1064
1065 Double_t nineshift = -tubeheight/TMath::Tan(TMath::DegToRad()*71)+83.*mm/2-66.*mm/2;
c4860469 1066 Double_t lnine[7] = {59.5*mm,76.5*mm,tubeheight,nineshift,height,heightred,zred};
100711d2 1067 TGeoVolume *nine = CradleBaseVolume(med,lnine,"bar9");
1068 nine->SetLineColor(kGray);
1069
1070 Double_t tenshift = (-tubeheight/TMath::Tan(TMath::DegToRad()*60) -221.*mm/2+195.*mm/2);
1071 Double_t lten[7] = {195.*mm,221.*mm,tubeheight,tenshift,height,heightred,zred};
1072 TGeoVolume *ten = CradleBaseVolume(med,lten,"bar10");
1073 ten->SetLineColor(kGray);
1074
1075 Double_t elevenshift = (-tubeheight/TMath::Tan(TMath::DegToRad()*70) -338.*mm/2+315.*mm/2);
c4860469 1076 Double_t leleven[7] = {308.*mm,331.*mm,tubeheight,elevenshift,height,heightred,zred};
100711d2 1077 TGeoVolume *eleven = CradleBaseVolume(med,leleven,"bar11");
1078 eleven->SetLineColor(kGray);
1079
1080 Double_t twelveshift = (-tubeheight/TMath::Tan(TMath::DegToRad()*60) -538.*mm/2+508.*mm/2);
c4860469 1081 Double_t ltwelve[7] = {507.*mm,537.*mm,tubeheight,twelveshift,height,heightred,zred};
100711d2 1082 TGeoVolume *twelve = CradleBaseVolume(med,ltwelve,"bar12");
1083 twelve->SetLineColor(kGray);
1084
c4860469 1085 Double_t thirteenshift = tubeheight/TMath::Tan(TMath::DegToRad()*43);
1086 Double_t lthirteen[7] = {708.*mm,708.*mm,tubeheight,thirteenshift,height,heightred,zred};
100711d2 1087 TGeoVolume *thirteen = CradleBaseVolume(med,lthirteen,"bar13");
1088 thirteen->SetLineColor(kGray);
1089
1090
1091 //vertical rectangles
c4860469 1092 TGeoVolume *vbox= new TGeoVolumeAssembly("Hvbox");
100711d2 1093 vbox->SetLineColor(kViolet);
1094 Double_t width = 50.*mm;
c4860469 1095
1096 TGeoVolume *vboxlast= new TGeoVolumeAssembly("Hvboxlast");//vertical structure on the short base
1097 vboxlast->SetLineColor(kViolet);
100711d2 1098
1099 Double_t barheight = 100.*mm;
1100 Double_t lAfourteen[7] = {1488.*mm,1488.*mm,barheight,0,width,heightred,zred};
1101 TGeoVolume *afourteen = CradleBaseVolume(med,lAfourteen,"bar14top");
1102 afourteen->SetLineColor(kGray);
1103
c4860469 1104 Double_t lBfourteen[7] = {387*mm,387.*mm,barheight,0,width,heightred,zred};
100711d2 1105 TGeoVolume *bfourteen = CradleBaseVolume(med,lBfourteen,"bar14vert");
1106 bfourteen->SetLineColor(kGray);
1107
1108 Double_t lCfourteen[7] = {1288.*mm,1288.*mm,barheight,0,width,heightred,zred};
1109 TGeoVolume *cfourteen = CradleBaseVolume(med,lCfourteen,"bar14bot");
1110 cfourteen->SetLineColor(kGray);
1111
c4860469 1112 Double_t oblshift = 50.*mm/ TMath::Tan(TMath::DegToRad()*35);
1113 Double_t lDfourteen[7] = {603.*mm,603.*mm,50.*mm,oblshift,width,heightred,zred};
100711d2 1114 TGeoVolume *dfourteen = CradleBaseVolume(med,lDfourteen,"bar14incl");
1115 dfourteen->SetLineColor(kGray);
1116
c4860469 1117
1118 Double_t lDfourteenlast[7] = {667.*mm,667.*mm,50.*mm,oblshift,width,heightred,zred};
1119 TGeoVolume *dfourteenlast = CradleBaseVolume(med,lDfourteenlast,"bar14incllast");
1120 dfourteenlast->SetLineColor(kGray);
1121
100711d2 1122 vbox->AddNode(afourteen,1,new TGeoTranslation(0.,487.*mm/2 -100.*mm/2,0.));
1123 TGeoRotation *vinrot = new TGeoRotation("vertbar"); vinrot->RotateZ(90);
1124 vbox->AddNode(bfourteen,1,new TGeoCombiTrans(1488*mm/2-100.*mm/2,-100.*mm/2,0.,vinrot));
1125 vbox->AddNode(bfourteen,2,new TGeoCombiTrans(-1488*mm/2+100.*mm/2,-100.*mm/2,0.,vinrot));
1126 TGeoRotation *rotboxbar = new TGeoRotation("rotboxbar"); rotboxbar->RotateZ(-35);
1127 TGeoRotation *arotboxbar = new TGeoRotation("arotboxbar"); arotboxbar->RotateZ(-35); arotboxbar->RotateY(180);
c4860469 1128 vbox->AddNode(dfourteen,1,new TGeoCombiTrans(-1488*mm/4,-1,0.4,rotboxbar));
1129 vbox->AddNode(dfourteen,2,new TGeoCombiTrans(+1488*mm/4,-1,0.4,arotboxbar));
1130 //vertical box on the short base of the cradle
1131 vboxlast->AddNode(afourteen,1,new TGeoTranslation(0.,487.*mm/2 -100.*mm/2,0.));
1132 vboxlast->AddNode(bfourteen,1,new TGeoCombiTrans(1488*mm/2-100.*mm/2,-100.*mm/2,0.,vinrot));
1133 vboxlast->AddNode(bfourteen,2,new TGeoCombiTrans(-1488*mm/2+100.*mm/2,-100.*mm/2,0.,vinrot));
1134 vboxlast->AddNode(dfourteenlast,1,new TGeoCombiTrans(-1488*mm/4+1.7,-3.,0.,rotboxbar));
1135 vboxlast->AddNode(dfourteenlast,2,new TGeoCombiTrans(+1488*mm/4-1.7,-3.,0.,arotboxbar));
100711d2 1136
1137
1138 //POSITIONING IN THE VIRTUAL VOLUME "cradle"
1139
1140 //long base
1141 TGeoRotation *rotl=new TGeoRotation("Clongbase"); rotl->RotateX(90);
c4860469 1142 cradle->AddNode(lbase,0,new TGeoCombiTrans ( 0*mm, (1488-100)*mm/2, -(597-60)*mm/2,rotl));
1143 cradle->AddNode(lbase,1,new TGeoCombiTrans ( 0*mm, -(1488-100)*mm/2, -(597-60)*mm/2,rotl));
100711d2 1144 //short base
1145 TGeoRotation *rots=new TGeoRotation("Cshortbase"); rots->RotateX(90); rots->RotateZ(90);
1146 cradle->AddNode(sbase,1,new TGeoCombiTrans ((6037-100)*mm/2, 0.,-(597-60)*mm/2,rots));
1147 cradle->AddNode(sbase,2,new TGeoCombiTrans (-(6037-100)*mm/2, 0.,-(597-60)*mm/2,rots));
1148
1149 //trapezoidal structure
1150 Double_t origintrapstructure = (6037-2*60)*mm/2 - 2288*mm;
1151
1152 TGeoRotation *rot1=new TGeoRotation("inclrot"); rot1->RotateX(90); rot1->RotateY(200);
1153 TGeoRotation *rot2=new TGeoRotation("horizrot"); rot2->RotateX(-90);
1154 Double_t dx =(1607-35)*mm*TMath::Cos(TMath::DegToRad()*20)/2-tubeheight/2*TMath::Sin(TMath::DegToRad()*20)+params[5];
1155
1156
c4860469 1157 cradle->AddNode(inclin,1,new TGeoCombiTrans(origintrapstructure + (2288+60)*mm -dx,729*mm,params[0]+0.4,rot1));//+0.7 added
100711d2 1158 cradle->AddNode(horiz,1,new TGeoCombiTrans( origintrapstructure,729*mm, 597*mm/2 - tubeheight/2,rot2));//correctly positioned
1159 TGeoRotation *rot1mirror=new TGeoRotation("inclmirrot"); rot1mirror->RotateX(90); rot1mirror->RotateY(200); rot1mirror->RotateZ(180);
c4860469 1160 cradle->AddNode(inclin,2,new TGeoCombiTrans(origintrapstructure - 2345*mm + dx,729*mm,params[0]+0.4,rot1mirror));//+0.7 added
1161 cradle->AddNode(inclin,3,new TGeoCombiTrans(origintrapstructure + (2288+60)*mm -dx,-729*mm,params[0]+0.4,rot1));//0.7 added
100711d2 1162 cradle->AddNode(horiz,2,new TGeoCombiTrans( origintrapstructure,-729*mm, 597*mm/2 - tubeheight/2,rot2));//correctly positioned
c4860469 1163 cradle->AddNode(inclin,4,new TGeoCombiTrans(origintrapstructure - 2345*mm + dx,-729*mm,params[0]+0.4,rot1mirror));//0.7 added
100711d2 1164
1165 //inner pieces on one side
1166 TGeoRotation *rot4=new TGeoRotation("4rot"); rot4->RotateX(-90); rot4->RotateY(-55); rot4->RotateZ(180);
1167 TGeoRotation *rot4a=new TGeoRotation("4arot"); rot4a->RotateX(-90); rot4a->RotateY(-55);
1168 cradle->AddNode(four,1,new TGeoCombiTrans(origintrapstructure -(39+(597-50-60)/(2*TMath::Tan(TMath::DegToRad()*55)))*mm- tubeheight/(2*TMath::Sin(TMath::DegToRad()*55)),-729*mm,params[3],rot4));
1169
1170 cradle->AddNode(four,2,new TGeoCombiTrans(origintrapstructure +(39+(597-50-60)/(2*TMath::Tan(TMath::DegToRad()*55)))*mm+tubeheight/(2*TMath::Sin(TMath::DegToRad()*55)),-729*mm,params[3],rot4a));
1171
1172 TGeoRotation *rot5=new TGeoRotation("5rot"); rot5->RotateX(-90); rot5->RotateY(-75); rot5->RotateZ(180);
1173 TGeoRotation *rot5a=new TGeoRotation("5arot"); rot5a->RotateX(-90); rot5a->RotateY(-75);
1174 cradle->AddNode(five,1,new TGeoCombiTrans(origintrapstructure +(486+(597-50-60)/(2*TMath::Tan(TMath::DegToRad()*75)))*mm +tubeheight/(2*TMath::Sin(TMath::DegToRad()*75)),-729*mm,0,rot5));
1175 cradle->AddNode(five,2,new TGeoCombiTrans(origintrapstructure -(486+(597-50-60)/(2*TMath::Tan(TMath::DegToRad()*75)))*mm - tubeheight/(2*TMath::Sin(TMath::DegToRad()*75)),-729*mm,0,rot5a));
1176 cradle->AddNode(six,1,new TGeoCombiTrans(origintrapstructure+808*mm+(480*mm/2)*TMath::Cos(TMath::DegToRad()*55)+tubeheight/(2*TMath::Sin(TMath::DegToRad()*55)) +
1177 2.,-729*mm,-params[4]-0.5,rot4a));
1178 cradle->AddNode(six,2,new TGeoCombiTrans(origintrapstructure-808*mm-(480*mm/2)*TMath::Cos(TMath::DegToRad()*55)-tubeheight/(2*TMath::Sin(TMath::DegToRad()*55))
1179 -2.,-729*mm,-params[4]-0.5,rot4));
1180
1181 TGeoRotation *rot7=new TGeoRotation("7rot"); rot7->RotateX(-90); rot7->RotateY(130); rot7->RotateZ(180);
1182 TGeoRotation *rot7a=new TGeoRotation("7arot"); rot7a->RotateX(-90); rot7a->RotateY(130);
1183
1184 cradle->AddNode(seven,1,new TGeoCombiTrans(origintrapstructure+1478*mm-(472*mm/2)*TMath::Cos(TMath::DegToRad()*50)+tubeheight/(2*TMath::Sin(TMath::DegToRad()*50)),-729*mm,-params[8],rot7));
1185 cradle->AddNode(seven,2,new
1186 TGeoCombiTrans(origintrapstructure-1478*mm+(472*mm/2)*TMath::Cos(TMath::DegToRad()*50)-tubeheight/(2*TMath::Sin(TMath::DegToRad()*50)),-729*mm,-params[8],rot7a));
1187 TGeoRotation *rot8=new TGeoRotation("8rot"); rot8->RotateX(-90); rot8->RotateY(-25);
1188 TGeoRotation *rot8a=new TGeoRotation("8arot"); rot8a->RotateX(-90); rot8a->RotateY(-25); rot8a->RotateZ(180);
1189 cradle->AddNode(eight,1,new TGeoCombiTrans(origintrapstructure+1640*mm+(244*mm/2)*TMath::Cos(TMath::DegToRad()*30)+tubeheight/(2*TMath::Sin(TMath::DegToRad()*30)),-729*mm,-20.5,rot8));
1190 cradle->AddNode(eight,2,new
1191 TGeoCombiTrans(origintrapstructure-1640*mm-(244*mm/2)*TMath::Cos(TMath::DegToRad()*30)-tubeheight/(2*TMath::Sin(TMath::DegToRad()*30)),-729*mm,-20.5,rot8a));
1192 TGeoRotation *rot9=new TGeoRotation("9rot"); rot9->RotateX(-90); rot9->RotateY(-90);
1193 TGeoRotation *rot9a=new TGeoRotation("9arot"); rot9a->RotateX(-90); rot9a->RotateY(-90); rot9a->RotateZ(180);
1194 cradle->AddNode(nine,1,new TGeoCombiTrans(origintrapstructure+1960*mm+2.5+3.,-729.*mm,-20.,rot9));
1195 cradle->AddNode(nine,2,new TGeoCombiTrans(origintrapstructure-1960*mm-2.5-3.,-729.*mm,-20.,rot9a));
100711d2 1196 //inner pieces on the other side
1197 TGeoRotation *rot10=new TGeoRotation("10rot"); rot10->RotateX(-90); rot10->RotateY(-120);
1198 TGeoRotation *rot10a=new TGeoRotation("10arot"); rot10a->RotateX(-90); rot10a->RotateY(-120); rot10a->RotateZ(180);
1199
c4860469 1200 cradle->AddNode(ten,1,new TGeoCombiTrans(origintrapstructure+1738*mm+tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))-2,+729.*mm,-13.,rot10));
1201 cradle->AddNode(ten,2,new TGeoCombiTrans(origintrapstructure-1738*mm-tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))+2,+729.*mm,-13.,rot10a));
100711d2 1202
1203 TGeoRotation *rot11=new TGeoRotation("11rot"); rot11->RotateX(-90); rot11->RotateY(50);
1204 TGeoRotation *rot11a=new TGeoRotation("11arot"); rot11a->RotateX(-90); rot11a->RotateY(50); rot11a->RotateZ(180);
c4860469 1205 cradle->AddNode(eleven,1,new TGeoCombiTrans(origintrapstructure-1738*mm-tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))+352.*mm,+729.*mm,-12.7,rot11));
1206 cradle->AddNode(eleven,2,new TGeoCombiTrans(origintrapstructure+1738*mm+tubeheight/(2*TMath::Sin(TMath::DegToRad()*60))-352.*mm,+729.*mm,-12.7,rot11a));
100711d2 1207
1208 TGeoRotation *rot12=new TGeoRotation("12rot"); rot12->RotateX(-90); rot12->RotateY(-120);
1209 TGeoRotation *rot12a=new TGeoRotation("12arot"); rot12a->RotateX(-90); rot12a->RotateY(-120); rot12a->RotateZ(180);
1210 cradle->AddNode(twelve,1,new TGeoCombiTrans(origintrapstructure+1065*mm,+729.*mm,1.,rot12));
1211 cradle->AddNode(twelve,2,new TGeoCombiTrans(origintrapstructure-1065*mm,+729.*mm,1.,rot12a));
1212
1213
1214 TGeoRotation *rot13=new TGeoRotation("13rot"); rot13->RotateX(-90); rot13->RotateY(-43); rot13->RotateZ(180);
1215 TGeoRotation *rot13a=new TGeoRotation("13arot"); rot13a->RotateX(-90); rot13a->RotateY(-43);
1216 cradle->AddNode(thirteen,1,new TGeoCombiTrans(origintrapstructure+572*mm - 18.,+729.*mm,-1.5,rot13));
1217 cradle->AddNode(thirteen,2,new TGeoCombiTrans(origintrapstructure-572*mm + 18.,+729.*mm,-1.5,rot13a));
1218
1219//vertical structures
1220 TGeoRotation *vrot = new TGeoRotation("vertbox"); vrot->RotateX(90); vrot->RotateZ(90);
c4860469 1221 cradle->AddNode(vboxlast,1,new TGeoCombiTrans(-6037*mm/2+50.*mm/2,0.,0.5,vrot));//vertial box on the short cradle base
100711d2 1222
1223 cradle->AddNode(vbox,2,new TGeoCombiTrans(-6037*mm/2+50.*mm/2+990.*mm,0.,0.5,vrot));
1224 cradle->AddNode(cfourteen,2,new TGeoCombiTrans(-6037*mm/2+50.*mm/2+990.*mm,0.,-477.*mm/2 -20.*mm/2,vrot));
1225
1226 cradle->AddNode(vbox, 3, new TGeoCombiTrans(origintrapstructure-(1641.36*mm+params[7])/2. + 50.*mm/2. +3, 0., 0.5,vrot));
1227 cradle->AddNode(cfourteen,3,new TGeoCombiTrans(origintrapstructure-(1641.36*mm+params[7])/2. + 50.*mm/2. +3, 0.,-477.*mm/2 -20.*mm/2,vrot));
1228
1229 cradle->AddNode(vbox,4,new TGeoCombiTrans(origintrapstructure+(1641.36*mm+params[7])/2. - 50.*mm/2. -3,0.,0.5,vrot));
1230 cradle->AddNode(cfourteen,4,new TGeoCombiTrans(origintrapstructure+(1641.36*mm+params[7])/2. - 50.*mm/2. -3,0.,-477.*mm/2 -20.*mm/2,vrot));
1231
1232return cradle;
1233}//CreateCradle()
1234
1235
a6e0ebfe 1236TGeoVolume * AliHMPIDv3::CradleBaseVolume(TGeoMedium *med, Double_t l[7],const char *name)
100711d2 1237{
1238/*
1239The trapezoid is build in the xy plane
1240
1241 0 ________________ 1
1242 / | \
1243 / | \
1244 / (0,0) \
1245 / | \
12463 /___________|____________\ 2
1247
1248 01 is right shifted => shift is positive
1249
1250 //1: small base (0-1); 2: long base (3-2);
1251 //3: trapezoid height; 4: shift between the two bases;
1252 //5: height 6: height reduction; 7: z-reduction;
1253*/
1254
1255
1256 TGeoXtru *xtruIn = new TGeoXtru(2);
1257 TGeoXtru *xtruOut = new TGeoXtru(2);
1258 xtruIn->SetName(Form("%sIN",name));
1259 xtruOut->SetName(Form("%sOUT",name));
1260
1261 Double_t xv[4], yv[4];
1262
1263 xv[0] = -(l[0]/2 - l[3]); yv[0] = l[2]/2;
1264 xv[1] = l[0]/2 + l[3]; yv[1] = l[2]/2;
1265 xv[2] = l[1]/2; yv[2] = -l[2]/2;
1266 xv[3] = -l[1]/2; yv[3] = -l[2]/2;
100711d2 1267
1268 xtruOut->DefinePolygon(4, xv, yv);
d38002cf 1269 xtruOut->DefineSection(0, -l[4]/2., 0., 0., 1.0);//0= I plane z; (0.,0.) = shift wrt centre; 1.= shape scale factor
1270 xtruOut->DefineSection(1, +l[4]/2., 0., 0., 1.0);//1= II plane z;
100711d2 1271
1272 Double_t tgalpha = 0;
9c5fe8da 1273 if(xv[3]-xv[0] == 0 ) tgalpha = 999999;
100711d2 1274 else tgalpha = l[2]/TMath::Abs(xv[3]-xv[0]);
1275 Double_t tgbeta = 0;
9c5fe8da 1276 if(xv[2]-xv[1]==0) tgbeta = 999999;
100711d2 1277 else tgbeta = l[2]/TMath::Abs(xv[2]-xv[1]);
1278
1279 xv[0] = xv[0]-l[5]/tgalpha; yv[0] = l[2]/2 - l[5];
1280 xv[1] = xv[1]+l[5]/tgbeta; yv[1] = l[2]/2 - l[5];
1281 xv[2] = xv[2]+l[5]/tgbeta; yv[2] = -l[2]/2+l[5];
1282 xv[3] = xv[3]-l[5]/tgalpha; yv[3] = -l[2]/2+l[5];
1283
1284 xtruIn->DefinePolygon(4, xv, yv);
1285 xtruIn->DefineSection(0, (-l[4]+l[6])/2, 0., 0., 1.0);
1286 xtruIn->DefineSection(1, (+l[4]-l[6])/2, 0., 0., 1.0);
1287
1288 TGeoCompositeShape *shape = new TGeoCompositeShape(name, Form("%sOUT-%sIN",name,name));
1289
1290 TGeoVolume *vol = new TGeoVolume(name, shape, med);
1291
1292 return vol;
1293}//CradleBaseVolume()