]> git.uio.no Git - u/mrichter/AliRoot.git/blame - ITS/AliITSsegmentationSSD.cxx
Transition to newIO
[u/mrichter/AliRoot.git] / ITS / AliITSsegmentationSSD.cxx
CommitLineData
b0f5e3fc 1/**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3 * *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
6 * *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
4ae5bbc4 15
88cb7938 16/* $Id$ */
b0f5e3fc 17
18#include <TMath.h>
1ca7869b 19#include <TF1.h>
4ae5bbc4 20#include <Riostream.h>
b0f5e3fc 21#include "AliITSsegmentationSSD.h"
22#include "AliITSgeom.h"
9e1a0ddb 23#include "AliRun.h"
24#include "AliModule.h"
fd61217e 25
b0f5e3fc 26ClassImp(AliITSsegmentationSSD)
27AliITSsegmentationSSD::AliITSsegmentationSSD(){
179578b2 28 // default constructor
29 fGeom = 0;
30 fCorr = 0;
31 fLayer = 0;
b0f5e3fc 32}
179578b2 33//----------------------------------------------------------------------
b0f5e3fc 34AliITSsegmentationSSD::AliITSsegmentationSSD(AliITSgeom *geom){
179578b2 35 // constuctor
36 fGeom = geom;
37 fCorr = 0;
38 SetDetSize();
39 SetPadSize();
40 SetNPads();
41 SetAngles();
42 fLayer = 0;
b0f5e3fc 43}
179578b2 44//______________________________________________________________________
45AliITSsegmentationSSD& AliITSsegmentationSSD::operator=(
46 AliITSsegmentationSSD &source){
0315d466 47// Operator =
179578b2 48 if(this==&source) return *this;
49 this->fNstrips = source.fNstrips;
50 this->fStereoP = source.fStereoP;
51 this->fStereoN = source.fStereoN;
52 this->fStereoPl5 = source.fStereoPl5;
53 this->fStereoNl5 = source.fStereoNl5;
54 this->fStereoPl6 = source.fStereoPl6;
55 this->fStereoNl6 = source.fStereoNl6;
56 this->fLayer = source.fLayer;
57 this->fPitch = source.fPitch;
58 this->fDz = source.fDz;
59 this->fDx = source.fDx;
60 this->fDy = source.fDy;
61 this->fLayer = source.fLayer;
62 this->fGeom = source.fGeom; // copy only the pointer
63 this->fCorr = new TF1(*(source.fCorr)); // make a proper copy
64 return *this;
b0f5e3fc 65}
179578b2 66//______________________________________________________________________
b0f5e3fc 67AliITSsegmentationSSD::AliITSsegmentationSSD(AliITSsegmentationSSD &source){
179578b2 68 // copy constructor
69 *this = source;
b0f5e3fc 70}
179578b2 71//----------------------------------------------------------------------
b0f5e3fc 72void AliITSsegmentationSSD::Init(){
179578b2 73 // standard initalizer
b0f5e3fc 74
e8189707 75 SetPadSize();
76 SetNPads();
b0f5e3fc 77 SetAngles();
179578b2 78}
79//----------------------------------------------------------------------
80void AliITSsegmentationSSD::Angles(Float_t &aP,Float_t &aN){
0315d466 81
179578b2 82 if (fLayer == 5){
83 aP = fStereoPl5;
84 aN = fStereoNl5;
85 } // end if
86 if (fLayer == 6){
87 aP = fStereoPl6;
88 aN = fStereoNl6;
89 } // end if
0315d466 90}
179578b2 91//----------------------------------------------------------------------
92void AliITSsegmentationSSD::SetLayer(Int_t l){
0315d466 93
179578b2 94 if (l==5) fLayer =5;
95 if (l==6) fLayer =6;
96}
97//----------------------------------------------------------------------
98void AliITSsegmentationSSD::GetPadTxz(Float_t &x,Float_t &z){
99 // returns P and N sided strip numbers for a given location.
100 // Transformation from microns detector center local coordinates
101 // to detector P and N side strip numbers..
102 /* _- Z
103 + angle / ^
104 fNstrips v | N-Side ...0
105 \-------/------------|-----------\--------\
106 |\\\\\\/////////////.|\\\\\\\\\\\\\\\\\\\\|
107 |0\\\\/////////////..|.\\\\\\\\\\\\\\\\\\\|
108 |00\\/////////////...|..\\\\\\\\\\\\\\\\\\|
109 X <--|000/////////////... |...\\\\\\\\\\\\\\\\\|
110 |00/////////////... | ...\\\\\\\\\\\\\\\\|
111 |0/////////////... | ...\\\\\\\\\\\\\\\|
112 |//////////////... | ...\\\\\\\\\\\\\\\|
113 /-----\--------------|--------------------/
114 fNstrips-1 P-Side ...0
115 |0\
116 |00\
117 Dead region: |000/
118 |00/
119 |0/
120 // expects x, z in microns
121 */
122 Float_t StereoP, StereoN;
123 Angles(StereoP,StereoN);
124 Float_t tanP = TMath::Tan(StereoP);
125 Float_t tanN = TMath::Tan(-StereoN);
126 Float_t x1 = x;
127 Float_t z1 = z;
128 x1 += fDx/2;
129 z1 += fDz/2;
130 x = (x1 - z1*tanP)/fPitch;
131 z = (x1 - tanN*(z1 - fDz))/fPitch;
132}
133//----------------------------------------------------------------------
134void AliITSsegmentationSSD::GetPadIxz(Float_t x,Float_t z,Int_t &iP,Int_t &iN){
0315d466 135 // returns P and N sided strip numbers for a given location.
179578b2 136 /* _- Z
137 + angle / ^
138 fNstrips v | N-Side ...0
139 \-------/------------|-----------\--------\
140 |\\\\\\/////////////.|\\\\\\\\\\\\\\\\\\\\|
141 |0\\\\/////////////..|.\\\\\\\\\\\\\\\\\\\|
142 |00\\/////////////...|..\\\\\\\\\\\\\\\\\\|
143 X <--|000/////////////... |...\\\\\\\\\\\\\\\\\|
144 |00/////////////... | ...\\\\\\\\\\\\\\\\|
145 |0/////////////... | ...\\\\\\\\\\\\\\\|
146 |//////////////... | ...\\\\\\\\\\\\\\\|
147 /-----\--------------|--------------------/
148 fNstrips-1 P-Side ...0
149 |0\
150 |00\
151 Dead region: |000/
152 |00/
153 |0/
b0f5e3fc 154
155 // expects x, z in microns
179578b2 156 */
c1c63494 157
0315d466 158 Float_t StereoP, StereoN;
159 Angles(StereoP,StereoN);
160 Float_t tanP=TMath::Tan(StereoP);
161 Float_t tanN=TMath::Tan(StereoN);
162 Float_t x1=x,z1=z;
163 x1 += fDx/2;
164 z1 += fDz/2;
165 Float_t ldX = x1 - z1*tanP; // distance from left-down edge
166 iP = (Int_t)(ldX/fPitch);
b0f5e3fc 167 iP = (iP<0)? -1: iP;
168 iP = (iP>fNstrips)? -1: iP;
0315d466 169
170 ldX = x1 - tanN*(fDz - z1);
171 iN = (Int_t)(ldX/fPitch);
b0f5e3fc 172 iN = (iN<0)? -1: iN;
173 iN = (iN>fNstrips)? -1: iN;
0315d466 174
b0f5e3fc 175}
0315d466 176//-------------------------------------------------------
179578b2 177void AliITSsegmentationSSD::GetPadCxz(Int_t iP,Int_t iN,Float_t &x,Float_t &z){
178 // actually this is the GetCrossing(Float_t &,Float_t &)
0315d466 179 // returns local x, z in microns !
b0f5e3fc 180
179578b2 181 Float_t Dx = fDx; // detector size in x direction, microns
182 Float_t Dz = fDz; // detector size in z direction, microns
183 Float_t xP; // x coordinate in the P side from the first P strip
184 Float_t xN; // x coordinate in the N side from the first N strip
185 Float_t StereoP, StereoN;
186 Angles(StereoP,StereoN);
187 Float_t kP=TMath::Tan(StereoP);
188 Float_t kN=TMath::Tan(StereoN);
b0f5e3fc 189
0315d466 190 xP=iP*fPitch;
191 xN=iN*fPitch;
192 x = xP + kP*(Dz*kN-xP+xN)/(kP+kN);
193 z = (Dz*kN-xP+xN)/(kP+kN);
194 x -= Dx/2;
195 z -= Dz/2;
66da7685 196 //if(TMath::Abs(z) > Dz/2) cout<<"Warning, wrong z local ="<<z<<endl;
0315d466 197 // Check that zL is inside the detector for the
198 // correspondent xP and xN coordinates
b0f5e3fc 199
200 return;
201}
179578b2 202//______________________________________________________________________
203void AliITSsegmentationSSD::LocalToDet(Float_t x,Float_t z,
204 Int_t &iP,Int_t &iN){
205 // Transformation from Geant cm detector center local coordinates
206 // to detector P and N side strip numbers..
207 /* _- Z
208 + angle / ^
209 fNstrips v | N-Side ...0
210 \-------/------------|-----------\--------\
211 |\\\\\\/////////////.|\\\\\\\\\\\\\\\\\\\\|
212 |0\\\\/////////////..|.\\\\\\\\\\\\\\\\\\\|
213 |00\\/////////////...|..\\\\\\\\\\\\\\\\\\|
214 X <--|000/////////////... |...\\\\\\\\\\\\\\\\\|
215 |00/////////////... | ...\\\\\\\\\\\\\\\\|
216 |0/////////////... | ...\\\\\\\\\\\\\\\|
217 |//////////////... | ...\\\\\\\\\\\\\\\|
218 /-----\--------------|--------------------/
219 fNstrips-1 P-Side ...0
220 |0\
221 |00\
222 Dead region: |000/
223 |00/
224 |0/
225 */
226 const Double_t kconst = 1.0E-04; // convert microns to cm.
227
228 x /= kconst; // convert to microns
229 z /= kconst; // convert to microns
230 this->GetPadTxz(x,z);
5752a110 231
179578b2 232 // first for P side
233 iP = (Int_t) x;
234 if(iP<0 || iP>=fNstrips) iP=-1; // strip number must be in range.
235 // Now for N side)
236 iN = (Int_t) z;
237 if(iN<0 || iN>=fNstrips) iN=-1; // strip number must be in range.
238 return;
239}
240//----------------------------------------------------------------------
241void AliITSsegmentationSSD::DetToLocal(Int_t ix,Int_t iPN,
242 Float_t &x,Float_t &z){
243 // Transformation from detector segmentation/cell coordiantes starting
244 // from 0. iPN=0 for P side and 1 for N side strip. Returned is z=0.0
245 // and the corresponding x value..
246 /* _- Z
247 + angle / ^
248 fNstrips v | N-Side ...0
249 \-------/------------|-----------\--------\
250 |\\\\\\/////////////.|\\\\\\\\\\\\\\\\\\\\|
251 |0\\\\/////////////..|.\\\\\\\\\\\\\\\\\\\|
252 |00\\/////////////...|..\\\\\\\\\\\\\\\\\\|
253 X <--|000/////////////... |...\\\\\\\\\\\\\\\\\|
254 |00/////////////... | ...\\\\\\\\\\\\\\\\|
255 |0/////////////... | ...\\\\\\\\\\\\\\\|
256 |//////////////... | ...\\\\\\\\\\\\\\\|
257 /-----\--------------|--------------------/
258 fNstrips-1 P-Side ...0
259 |0\
260 |00\
261 Dead region: |000/
262 |00/
263 |0/
264 */
265 // for strips p-side
266 // x = a + b + z*tan(fStereoP); a = Dpx(iP)*(iP+0.5)-dx; b = dz*th;
267 // for strips n-side
268 // x = a + b + z*tan(fStereoP); a = Dpx(iN)*(iN+0.5)-dx; b = -dz*th;
269 const Double_t kconst = 1.0E-04; // convert microns to cm.
270 Float_t flag=kconst*Dx(); // error value
271 Double_t th=0.0,dx,dz,i,a,b=0.0,xb[4],zb[4];
272 Float_t StereoP, StereoN;
273 Angles(StereoP,StereoN);
5752a110 274
179578b2 275 z = 0.0; // Strip center in z.
276 if(iPN<0 || iPN>1){// if error return full detector size in x.
277 x = z = flag;
278 return;
279 } // end if
280 if(ix<0 || ix>=fNstrips) { // if error return full detector size in x.
281 x = z = flag;
282 return;
283 } // end if
284 i = (Double_t) ix; // convert to double
285 dx = 0.5*kconst*Dx(); // half distance in x in cm
286 dz = 0.5*kconst*Dz(); // half distance in z in cm
287 a = kconst*Dpx(ix)*(i+0.5)-dx; // Min x value.
288 if(iPN==0){ //P-side angle defined backwards.
289 th = TMath::Tan(StereoP);
290 b = dz*th;
291 }else if(iPN==1){ // N-side
292 th = TMath::Tan(-StereoN);
293 b = -dz*th;
294 } // end if
295 // compute average/center position of the strip.
296 xb[0] = +dx; if(th!=0.0) zb[0] = (+dx-a-b)/th; else zb[0] = 0.0;
297 xb[1] = -dx; if(th!=0.0) zb[1] = (-dx-a-b)/th; else zb[1] = 0.0;
298 xb[2] = a+b+dz*th; zb[2] = +dz;
299 xb[3] = a+b-dz*th; zb[3] = -dz;
300 x = 0.0; z = 0.0;
301 for(Int_t j=0;j<4;j++){
302 if(xb[j]>=-dx && xb[j]<=dx && zb[j]>=-dz && zb[j]<=dz){
303 x += xb[j];
304 z += zb[j];
305 } // end if
306 } // end for
307 x *= 0.5;
308 z *= 0.5;
309 return;
310}
311//----------------------------------------------------------------------
312Bool_t AliITSsegmentationSSD::GetCrossing(Int_t iP,Int_t iN,
313 Float_t &x,Float_t &z,
314 Float_t c[2][2]){
315 // Given one P side strip and one N side strip, Returns kTRUE if they
316 // cross each other and the location of the two crossing strips and
317 // their correxlation matrix c[2][2].
318 /* _- Z
319 + angle / ^
320 fNstrips v | N-Side ...0
321 \-------/------------|-----------\--------\
322 |\\\\\\/////////////.|\\\\\\\\\\\\\\\\\\\\|
323 |0\\\\/////////////..|.\\\\\\\\\\\\\\\\\\\|
324 |00\\/////////////...|..\\\\\\\\\\\\\\\\\\|
325 X <--|000/////////////... |...\\\\\\\\\\\\\\\\\|
326 |00/////////////... | ...\\\\\\\\\\\\\\\\|
327 |0/////////////... | ...\\\\\\\\\\\\\\\|
328 |//////////////... | ...\\\\\\\\\\\\\\\|
329 /-----\--------------|--------------------/
330 fNstrips-1 P-Side ...0
331 |0\
332 |00\
333 Dead region: |000/
334 |00/
335 |0/
336 c[2][2] is defined as follows
337 /c[0][0] c[0][1]\ /delta iP\ = /delta x\
338 \c[1][0] c[1][1]/ \delta iN/ = \delta z/
339 */
340 const Double_t kconst = 1.0E-04; // convert microns to cm.
341 Double_t thp,thn,th,dx,dz,p,ip,in;
342 Float_t StereoP, StereoN;
343 Angles(StereoP,StereoN);
344
345 thp = TMath::Tan(StereoP);
346 thn = TMath::Tan(-StereoN);
347 th = thp-thn;
348 if(th==0.0) { // parall strips then never cross.
349 x = 0.0;
350 z = 0.0;
351 c[0][0] = c[1][0] = c[0][1] = c[1][1] = 0.0;
352 return kFALSE;
353 } // end if
354 // The strips must cross some place in space.
355 ip = (Double_t) iP; // convert to double now for speed
356 in = (Double_t) iN; // convert to double now for speed
357 dx = 0.5*kconst*Dx(); // half distance in x in cm
358 dz = 0.5*kconst*Dz(); // half distance in z in cm
359 p = kconst*Dpx(iP); // Get strip spacing/pitch now
360 x = 0.5*p+dx + (p*(in*thp-ip*thn)-2.0*dz*thp*thn)/th;
361 z =(p*(in-ip)-dz*(thp+thn))/th;
362 // compute correlations.
363 c[0][0] = -thn*p/th; // dx/diP
364 c[1][1] = p/th; // dz/diN
365 c[0][1] = p*thp/th; // dx/diN
366 c[1][0] = -p/th; // dz/diP
367 if(x<-dx || x>dx || z<-dz || z>dz) return kFALSE; // crossing is outside
368 // of the detector so
369 // these strips don't
370 // cross.
371 return kTRUE;
372}