]> git.uio.no Git - u/mrichter/AliRoot.git/blame - ITS/AliITSv11.cxx
git://git.uio.no / u / mrichter / AliRoot.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Bug fix: wrong wing assignment for hits on the border of the two wings (Francesco)
[u/mrichter/AliRoot.git] / ITS / AliITSv11.cxx
CommitLineData
2b680d9b 1/**************************************************************************
717cdf18 2 * Copyright(c) 2007-2009, ALICE Experiment at CERN, All rights reserved. *
2b680d9b 3 * *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
6 * *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
15
effd7456 16
717cdf18 17/* $Id: */
18
19
20//========================================================================
effd7456 21//
717cdf18 22// Geometry of the Inner Tracking System
23// ---------------------------------------
24// This geometry is fully described in TGeo geometry (v11)
25//
26// Ludovic Gaudichet (gaudichet@to.infn.it)
27// Mario Sitta (sitta@to.infn.it)
b7943f00 28//
717cdf18 29//========================================================================
30
31
32// $Log$
33// Revision 1.1 2011/06/10 14:48:24 masera
34// First version from v11Hybrid to v11 (M. Sitta)
b7943f00 35//
717cdf18 36
b7943f00 37
541f7ba6 38#include <TClonesArray.h>
717cdf18 39#include <TGeoGlobalMagField.h>
7dd2cbe4 40#include <TGeoManager.h>
717cdf18 41#include <TGeoMatrix.h>
42#include <TGeoPhysicalNode.h>
7dd2cbe4 43#include <TGeoVolume.h>
717cdf18 44#include <TGeoXtru.h>
2b680d9b 45#include <TLorentzVector.h>
717cdf18 46#include <TString.h>
7dd2cbe4 47#include <TVirtualMC.h>
b7943f00 48
49#include "AliITS.h"
531d6cdc 50#include "AliITSDetTypeSim.h"
b7943f00 51#include "AliITShit.h"
717cdf18 52#include "AliITSCalibrationSDD.h"
2b680d9b 53#include "AliITSsegmentationSDD.h"
b7943f00 54#include "AliITSsegmentationSPD.h"
55#include "AliITSsegmentationSSD.h"
108bd0fe 56#include "AliITSv11.h"
717cdf18 57#include "AliLog.h"
7dd2cbe4 58#include "AliMC.h"
59#include "AliMagF.h"
60#include "AliRun.h"
61#include "AliTrackReference.h"
717cdf18 62#include "AliITSv11GeometrySPD.h"
63#include "AliITSv11GeometrySDD.h"
64#include "AliITSv11GeometrySSD.h"
65#include "AliITSv11GeometrySupport.h"
66#include "AliGeomManager.h"
67
541f7ba6 68
b7943f00 69ClassImp(AliITSv11)
f7315efc 70
717cdf18 71//______________________________________________________________________
72AliITSv11::AliITSv11():
73 fByThick(kTRUE),
717cdf18 74 fIDMother(0),
d583ec69 75 fInitGeom(kv11),
717cdf18 76 fSPDgeom(0),
77 fSDDgeom(0),
78 fSSDgeom(0),
79 fSupgeom(0)
80 {
81 // Standard default constructor
82 // Inputs:
83 // none.
84 // Outputs:
85 // none.
86 // Return:
87 // none.
2b680d9b 88}
b7943f00 89
fa4639a3 90//______________________________________________________________________
717cdf18 91AliITSv11::AliITSv11(const char *title)
92 : AliITS("ITS", title),
93 fByThick(kTRUE),
717cdf18 94 fIDMother(0),
d583ec69 95 fInitGeom(kv11),
717cdf18 96 fSPDgeom(0),
97 fSDDgeom(0),
98 fSSDgeom(0),
99 fSupgeom(0)
33ddec7d 100{
717cdf18 101 // Standard constructor for the v11 geometry.
102 // Inputs:
103 // const char * title Arbitrary title
104 // Outputs:
105 // none.
106 // Return:
107 // none.
108 Int_t i;
109
110 fSPDgeom = new AliITSv11GeometrySPD();
531d6cdc 111 fSDDgeom = new AliITSv11GeometrySDD(0);
717cdf18 112 fSSDgeom = new AliITSv11GeometrySSD();
113 fSupgeom = new AliITSv11GeometrySupport();
fa4639a3 114
531d6cdc 115 fIdN = 6;
116 fIdName = new TString[fIdN];
717cdf18 117
118 fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
119 fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
120
108bd0fe 121 fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
122 fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
717cdf18 123
124 fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
125 fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
126
fa4639a3 127 fIdSens = new Int_t[fIdN];
531d6cdc 128 for(i=0;i<fIdN;i++) fIdSens[i] = 0;
717cdf18 129
130 SetDensityServicesByThickness();
531d6cdc 131
fa4639a3 132}
717cdf18 133
2b680d9b 134//______________________________________________________________________
b78b741f 135AliITSv11::AliITSv11(const char *name, const char *title)
717cdf18 136 : AliITS("ITS", title),
137 fByThick(kTRUE),
717cdf18 138 fIDMother(0),
d583ec69 139 fInitGeom(kv11),
717cdf18 140 fSPDgeom(0),
141 fSDDgeom(0),
142 fSSDgeom(0),
143 fSupgeom(0)
012f0f4c 144{
717cdf18 145 // Standard constructor for the v11 geometry.
146 // Inputs:
147 // const char * name Ignored, set to "ITS"
148 // const char * title Arbitrary title
149 // Outputs:
150 // none.
151 // Return:
152 // none.
153 Int_t i;
154
155 fSPDgeom = new AliITSv11GeometrySPD();
156 fSDDgeom = new AliITSv11GeometrySDD(0);
325d8c32 157 fSSDgeom = new AliITSv11GeometrySSD();
717cdf18 158 fSupgeom = new AliITSv11GeometrySupport();
531d6cdc 159
531d6cdc 160 fIdN = 6;
161 fIdName = new TString[fIdN];
717cdf18 162
163 (void) name; // removes warning message
164
54c9a3d9 165 fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
166 fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
717cdf18 167
108bd0fe 168 fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
169 fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
717cdf18 170
54c9a3d9 171 fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
172 fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
717cdf18 173
531d6cdc 174 fIdSens = new Int_t[fIdN];
175 for(i=0;i<fIdN;i++) fIdSens[i] = 0;
717cdf18 176
177 SetDensityServicesByThickness();
178
162acd47 179}
717cdf18 180
dfefbaec 181//______________________________________________________________________
b7943f00 182AliITSv11::~AliITSv11() {
717cdf18 183 // Standard destructor
184 // Inputs:
185 // none.
186 // Outputs:
187 // none.
188 // Return:
189 // none.
190 delete fSPDgeom;
b7943f00 191 delete fSDDgeom;
717cdf18 192 delete fSSDgeom;
193 delete fSupgeom;
2b680d9b 194}
717cdf18 195
2b680d9b 196//______________________________________________________________________
717cdf18 197void AliITSv11::SetT2Lmatrix(Int_t uid, Double_t yShift,
198 Bool_t yFlip, Bool_t yRot180) const
199{
200
201 //
202 // Creates the TGeo Local to Tracking transformation matrix
203 // and sends it to the corresponding TGeoPNEntry
204 //
205 // This function is used in AddAlignableVolumes()
206
207 TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntryByUID(uid);
208 TGeoHMatrix* globMatrix = alignableEntry->GetGlobalOrig();
209
210 Double_t *gtrans = globMatrix->GetTranslation(), rotMatrix[9];
211 memcpy(&rotMatrix[0], globMatrix->GetRotationMatrix(), 9*sizeof(Double_t));
212 Double_t al = TMath::ATan2(rotMatrix[1],rotMatrix[0]);
213 if (yRot180) {
214 al = TMath::ATan2(rotMatrix[1],-rotMatrix[0]);
215 }
216 Double_t xShift = gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al);
217 Double_t zShift = -gtrans[2];
218
219 TGeoHMatrix *matLtoT = new TGeoHMatrix;
220 matLtoT->SetDx( xShift ); // translation
221 matLtoT->SetDy( yShift );
222 matLtoT->SetDz( zShift );
223 rotMatrix[0]= 0; rotMatrix[1]= 1; rotMatrix[2]= 0; // + rotation
224 rotMatrix[3]= 1; rotMatrix[4]= 0; rotMatrix[5]= 0;
225 rotMatrix[6]= 0; rotMatrix[7]= 0; rotMatrix[8]=-1;
226 if (yFlip) rotMatrix[3] = -1; // flipping in y (for SPD1)
227 if (yFlip) rotMatrix[1] = -1; // flipping in y (for SPD1)
228
229 if (yRot180) { // rotation of pi around the axis perpendicular to the wafer
230 if (yFlip) matLtoT->SetDx( -xShift ); // flipping in y (for SPD1)
231 matLtoT->SetDy( -yShift );
232 matLtoT->SetDz( -zShift );
233 rotMatrix[8]=1;
234 rotMatrix[3] = -1;
235 if (yFlip) rotMatrix[3] = 1; // flipping in y (for SPD1)
236 }
237
238 TGeoRotation rot;
239 rot.SetMatrix(rotMatrix);
240 matLtoT->MultiplyLeft(&rot);
241 TGeoHMatrix *matTtoL = new TGeoHMatrix(matLtoT->Inverse());
242 delete matLtoT;
243 alignableEntry->SetMatrix(matTtoL);
244}
245
246//______________________________________________________________________
247void AliITSv11::AddAlignableVolumes() const
248{
249 // Creates entries for alignable volumes associating the symbolic volume
250 // name with the corresponding volume path.
251 //
252 // Records in the alignable entries the transformation matrices converting
253 // TGeo local coordinates (in the RS of alignable volumes) to the tracking
254 // system
255 // For this, this function has to run before the misalignment because we
256 // are using the ideal positions in the AliITSgeom object.
257 // Inputs:
258 // none.
259 // Outputs:
260 // none.
261 // Return:
262 // none.
263
264 AliInfo("Add ITS alignable volumes");
265
266 if (!gGeoManager) {
267 AliFatal("TGeoManager doesn't exist !");
268 return;
269 }
270
271 AliGeomManager::ELayerID layerId;
272 Int_t modUID, modnum;
273
274 if( !gGeoManager->SetAlignableEntry("ITS","ALIC_1/ITSV_1") )
275 AliFatal(Form("Unable to set alignable entry ! %s :: %s",
276 "ITS","ALIC_1/ITSV_1"));
277
278 TString strSPD = "ITS/SPD";
279 TString strSDD = "ITS/SDD";
280 TString strSSD = "ITS/SSD";
281 TString strStave = "/Stave";
282 TString strHalfStave = "/HalfStave";
283 TString strLadder = "/Ladder";
284 TString strSector = "/Sector";
285 TString strSensor = "/Sensor";
286 TString strEntryName1;
287 TString strEntryName2;
288 TString strEntryName3;
289 TString strEntryName4;
290
291 TString str0;
292 TString str1;
293 TString str2;
294
295 TString ladder;
296
297 //===== SPD layers =====
298
299 str0 = "ALIC_1/ITSV_1/ITSSPD_1/ITSSPDCarbonFiberSectorV_";
300 str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay1-Stave_";
301
302 TString str1Bis = "/ITSSPDhalf-Stave";
303 TString str1Tierce = "_1";
304
305 str2 = "/ITSSPDlay1-Ladder_";
306
307 TString sector;
308 TString stave;
309 TString halfStave;
310 TString module;
311
312 layerId = AliGeomManager::kSPD1;
313 modnum = 0;
314
315 for(Int_t cSect = 0; cSect<10; cSect++) {
316
317 sector = str0;
318 sector += cSect+1; // this is one full sector
319 strEntryName1 = strSPD;
320 strEntryName1 += 0;
321 strEntryName1 += strSector;
322 strEntryName1 += cSect;
323 if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
324 AliFatal(Form("New lay 1: Unable to set alignable entry 1! %s::%s",
325 strEntryName1.Data(),sector.Data()));
b7943f00 326
717cdf18 327 for(Int_t cStave=0; cStave<2; cStave++) {
328
329 stave = sector;
330 stave += str1;
331 stave += cStave+1;
332 strEntryName2 = strEntryName1;
333 strEntryName2 += strStave;
334 strEntryName2 += cStave;
335
336 for(Int_t cHS=0; cHS<2; cHS++) {
337
338 halfStave = stave;
339 halfStave += str1Bis;
340 halfStave += cHS;
341 halfStave += str1Tierce;
342 strEntryName3 = strEntryName2;
343 strEntryName3 += strHalfStave;
344 strEntryName3 += cHS;
345
346 if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
347 halfStave.Data()))
348 AliFatal(Form("New lay 1: Unable to set alignable entry 3! %s::%s",
349 strEntryName3.Data(),halfStave.Data()));
350
351 for(Int_t cLad=0; cLad<2; cLad++) {
352
353 modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
354 module = halfStave;
355 module += str2;
356 module += cLad+cHS*2+1;
357 strEntryName4 = strEntryName3;
358 strEntryName4 += strLadder;
359 strEntryName4 += cLad+cHS*2;
360 if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
361 AliFatal(Form("New lay 1: Unable to set alignable entry 4! %s::%s",
362 strEntryName4.Data(),module.Data()));
363
364 SetT2Lmatrix(modUID, 0.0081, kTRUE, kTRUE);
365 // 0.0081 is the shift between the centers of alignable
366 // and sensitive volumes. It is directly extracted from
367 // the new SPD geometry
368 } // end for cLad
369 } // end for cHS
370 } // end for cStave
371 } // end for cSect
372
373 layerId = AliGeomManager::kSPD2;
374 modnum = 0;
375 str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay2-Stave_";
376 str2 = "/ITSSPDlay2-Ladder_";
377
378 for(Int_t cSect = 0; cSect<10; cSect++) {
379
380 sector = str0;
381 sector += cSect+1; // this is one full sector
382 strEntryName1 = strSPD;
383 strEntryName1 += 1;
384 strEntryName1 += strSector;
385 strEntryName1 += cSect;
386
387 for(Int_t cStave=0; cStave<4; cStave++) {
388
389 stave = sector;
390 stave += str1;
391 stave += cStave+1;
392 strEntryName2 = strEntryName1;
393 strEntryName2 += strStave;
394 strEntryName2 += cStave;
395
396 for(Int_t cHS=0; cHS<2; cHS++) {
397
398 halfStave = stave;
399 halfStave += str1Bis;
400 halfStave += cHS;
401 halfStave += str1Tierce;
402 strEntryName3 = strEntryName2;
403 strEntryName3 += strHalfStave;
404 strEntryName3 += cHS;
405
406 if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),
407 halfStave.Data()))
408 AliFatal(Form("New lay 2: Unable to set alignable entry 3! %s::%s",
409 strEntryName3.Data(),halfStave.Data()));
410
411 for(Int_t cLad=0; cLad<2; cLad++) {
412
413 modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
414 module = halfStave;
415 module += str2;
416 module += cLad+cHS*2 +1;
417 strEntryName4 = strEntryName3;
418 strEntryName4 += strLadder;
419 strEntryName4 += cLad+cHS*2;
420 if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID))
421 AliFatal(Form("New lay 2: Unable to set alignable entry 4! %s::%s",
422 strEntryName4.Data(),module.Data()));
423
424 SetT2Lmatrix(modUID, -0.0081, kFALSE);
425 } // end for cLad
426 } // end for cHS
427 } // end for cStave
428 } // cSect
429
430 //===== SDD layers =====
431
432 layerId = AliGeomManager::kSDD1;
433 modnum = 0;
434
435 str0 = "/ALIC_1/ITSV_1/ITSsddLayer3_1/ITSsddLadd_"; // SDD layer1
436 str1 = "/ITSsddSensor3_";
437
438 TString sensor;
439
440 for(Int_t c1 = 0; c1<14; c1++) {
441
442 ladder = str0;
443 ladder += c1; // the set of wafers from one ladder
444 strEntryName1 = strSDD;
445 strEntryName1 += 2;
446 strEntryName1 +=strLadder;
447 strEntryName1 += c1;
448 //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
449 if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
450 AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
451 strEntryName1.Data(),ladder.Data()));
452
453 for(Int_t c2 =0; c2<6; c2++) {
454
455 modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
456 sensor = ladder;
457 sensor += str1;
458 sensor += c2;
459 strEntryName2 = strEntryName1;
460 strEntryName2 += strSensor;
461 strEntryName2 += c2;
462 //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
463 if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
464 AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
465 strEntryName2.Data(),sensor.Data()));
466
467 SetT2Lmatrix(modUID, 0, kFALSE, c2>=3);
468 }
469 }
470
471 layerId = AliGeomManager::kSDD2;
472 modnum = 0;
473 str0 = "/ALIC_1/ITSV_1/ITSsddLayer4_1/ITSsddLadd_"; // SDD layer2
474 str1 = "/ITSsddSensor4_";
475
476 for(Int_t c1 = 0; c1<22; c1++) {
477
478 ladder = str0;
479 ladder += c1; // the set of wafers from one ladder
480 strEntryName1 = strSDD;
481 strEntryName1 += 3;
482 strEntryName1 += strLadder;
483 strEntryName1 += c1;
484 //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
485 if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
486 AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
487 strEntryName1.Data(),ladder.Data()));
488
489 for(Int_t c2 =0; c2<8; c2++) {
490
491 modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
492 sensor = ladder;
493 sensor += str1;
494 sensor += c2;
495 strEntryName2 = strEntryName1;
496 strEntryName2 += strSensor;
497 strEntryName2 += c2;
498 //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
499 if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID))
500 AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
501 strEntryName2.Data(),sensor.Data()));
502
503 SetT2Lmatrix(modUID, 0, kFALSE, c2>=4);
504 }
505 }
506
507 //===== SSD layers =====
508
509 layerId = AliGeomManager::kSSD1;
510 modnum = 0;
511
512 str0 = "/ALIC_1/ITSV_1/ITSssdLayer5_1/ITSssdLay5Ladd_";//SSD layer1
513 str1 = "/ITSssdSensor5_";
514 str2 = "";
515
516 TString wafer;
517
518 for(Int_t c1 = 0; c1<34; c1++) {
519
520 ladder = str0;
521 ladder += c1; // the set of wafers from one ladder
522 strEntryName1 = strSSD;
523 strEntryName1 += 4;
524 strEntryName1 += strLadder;
525 strEntryName1 += c1;
526 //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
527 if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
528 AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
529 strEntryName1.Data(),ladder.Data()));
530
531 for(Int_t c2 =0; c2<22; c2++) {
532
533 modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
534 wafer = ladder;
535 wafer += str1;
536 wafer += c2;
537 //wafer += str2; // one wafer
538 strEntryName2 = strEntryName1;
539 strEntryName2 += strSensor;
540 strEntryName2 += c2;
541 //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
542 if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
543 AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
544 strEntryName2.Data(),wafer.Data()));
545
546 SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
547 }
548 }
549
550 layerId = AliGeomManager::kSSD2;
551 modnum = 0;
552 str0 = "/ALIC_1/ITSV_1/ITSssdLayer6_1/ITSssdLay6Ladd_"; // SSD layer2
553 str1 = "/ITSssdSensor6_";
554 str2 = "";
555
556 for(Int_t c1 = 0; c1<38; c1++) {
557
558 ladder = str0;
559 ladder += c1; // the set of wafers from one ladder
560 strEntryName1 = strSSD;
561 strEntryName1 += 5;
562 strEntryName1 += strLadder;
563 strEntryName1 += c1;
564 //printf("%s == %s\n",strEntryName1.Data(),ladder.Data());
565 if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
566 AliFatal(Form("Unable to set alignable entry 1! %s :: %s",
567 strEntryName1.Data(),ladder.Data()));
568
569 for(Int_t c2 =0; c2<25; c2++) {
570
571 modUID = AliGeomManager::LayerToVolUID(layerId,modnum++);
572 wafer = ladder;
573 wafer += str1;
574 wafer += c2;
575 //wafer += str2; // one wafer
576 strEntryName2 = strEntryName1;
577 strEntryName2 += strSensor;
578 strEntryName2 += c2;
579 //printf("%s == %s\n",strEntryName2.Data(),wafer.Data());
580 if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID))
581 AliFatal(Form("Unable to set alignable entry 2! %s :: %s",
582 strEntryName2.Data(),wafer.Data()));
583
584 SetT2Lmatrix(modUID, 0, kFALSE, kFALSE);
585 }
586 }
587
541f7ba6 588}
717cdf18 589
541f7ba6 590//______________________________________________________________________
717cdf18 591void AliITSv11::CreateGeometry()
592{
593 // Create the geometry and insert it in ALIC
594
595 TGeoManager *geoManager = gGeoManager;
596
597 TGeoVolume *vALIC = geoManager->GetVolume("ALIC");
598
599 // This part is really ugly, needs to be redone
600 new TGeoVolumeAssembly("ITSV");
601 new TGeoVolumeAssembly("ITSS");
602
603 TGeoVolume *vITSV = geoManager->GetVolume("ITSV");
604 TGeoVolume *vITSS = geoManager->GetVolume("ITSS");
605
606 vALIC->AddNode(vITSV, 1, 0);
607 vALIC->AddNode(vITSS, 1, 0);
608
609 //
717cdf18 610 const Int_t kLength=100;
611 Char_t vstrng[kLength];
d583ec69 612 if(fInitGeom.WriteVersionString(vstrng,kLength,(AliITSVersion_t)IsVersion())){
717cdf18 613 vITSV->SetTitle(vstrng);
614 vITSS->SetTitle(vstrng);
615 }
616
617 fSPDgeom->SPDSector(vITSV);
618
619 fSDDgeom->Layer3(vITSV);
620 fSDDgeom->Layer4(vITSV);
621 fSDDgeom->ForwardLayer3(vITSV);
622 fSDDgeom->ForwardLayer4(vITSV);
623
624 fSSDgeom->Layer5(vITSV);
625 fSSDgeom->Layer6(vITSV);
626 fSSDgeom->LadderSupportLayer5(vITSV);
627 fSSDgeom->LadderSupportLayer6(vITSV);
628 fSSDgeom->EndCapSupportSystemLayer6(vITSV);
629 fSSDgeom->EndCapSupportSystemLayer5(vITSV);
630
631 fSupgeom->SPDCone(vITSV);
632 fSupgeom->SDDCone(vITSV);
633 fSupgeom->SSDCone(vITSV);
634
635 fSDDgeom->SDDCables(vITSV);
636 fSSDgeom->SSDCables(vITSV);
637 fSupgeom->ServicesCableSupport(vITSS);
638
639 fSupgeom->ITSTPCSupports(vITSS);
640
641}
642
643//______________________________________________________________________
644void AliITSv11::CreateMaterials()
645{
646 // Create ITS materials
647 // This function defines the default materials used in the Geant
648 // Monte Carlo simulations for the geometries AliITSv1, AliITSv3,
649 // AliITSv11.
650 // In general it is automatically replaced by
651 // the CreateMaterials routine defined in AliITSv?. Should the function
652 // CreateMaterials not exist for the geometry version you are using this
653 // one is used. See the definition found in AliITSv5 or the other routine
654 // for a complete definition.
54c9a3d9 655 // Inputs:
717cdf18 656 // none.
54c9a3d9 657 // Outputs:
717cdf18 658 // none.
54c9a3d9 659 // Return:
717cdf18 660 // none.
661
662 Int_t ifield = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ();
663 Float_t fieldm = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max();
531d6cdc 664
717cdf18 665 Float_t tmaxfd = 0.1; // 1.0; // Degree
666 Float_t stemax = 1.0; // cm
667 Float_t deemax = 0.1; // 30.0; // Fraction of particle's energy 0<deemax<=1
668 Float_t epsil = 1.0E-4; // 1.0; // cm
669 Float_t stmin = 0.0; // cm "Default value used"
670
671 Float_t tmaxfdSi = 0.1; // .10000E+01; // Degree
672 Float_t stemaxSi = 0.0075; // .10000E+01; // cm
673 Float_t deemaxSi = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
674 Float_t epsilSi = 1.0E-4;// .10000E+01;
675 Float_t stminSi = 0.0; // cm "Default value used"
676
677 Float_t tmaxfdAir = 0.1; // .10000E+01; // Degree
678 Float_t stemaxAir = .10000E+01; // cm
679 Float_t deemaxAir = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1
680 Float_t epsilAir = 1.0E-4;// .10000E+01;
681 Float_t stminAir = 0.0; // cm "Default value used"
682
683 Float_t tmaxfdServ = 1.0; // 10.0; // Degree
684 Float_t stemaxServ = 1.0; // 0.01; // cm
685 Float_t deemaxServ = 0.5; // 0.1; // Fraction of particle's energy 0<deemax<=1
686 Float_t epsilServ = 1.0E-3; // 0.003; // cm
687 Float_t stminServ = 0.0; //0.003; // cm "Default value used"
688
689 // Freon PerFluorobuthane C4F10 see
690 // http://st-support-cooling-electronics.web.cern.ch/
691 // st-support-cooling-electronics/default.htm
692 Float_t afre[2] = { 12.011,18.9984032 };
693 Float_t zfre[2] = { 6., 9. };
694 Float_t wfre[2] = { 4.,10. };
695 Float_t densfre = 1.52;
696
697
698 //CM55J
699
700 Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794};
701 Float_t zCM55J[4]={6.,7.,8.,1.};
702 Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765};
703 Float_t dCM55J = 1.8;
704
705 //ALCM55J
706
707 Float_t aALCM55J[5]={12.0107,14.0067,15.9994,1.00794,26.981538};
708 Float_t zALCM55J[5]={6.,7.,8.,1.,13.};
709 Float_t wALCM55J[5]={0.817657902,0.0093488157,0.0503618265,0.0226320885,0.1};
710 Float_t dALCM55J = 1.9866;
711
712 //Si Chips
713
714 Float_t aSICHIP[6]={12.0107,14.0067,15.9994,1.00794,28.0855,107.8682};
715 Float_t zSICHIP[6]={6.,7.,8.,1.,14., 47.};
716 Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,0.004367771,0.844665,0.09814344903};
717 Float_t dSICHIP = 2.36436;
718
719 //Inox
531d6cdc 720
717cdf18 721 Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,95.94,55.845};
722 Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.};
723 Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654};
724 Float_t dINOX = 8.03;
725
726 //AISI 304 L (from F.Tosello's web page - M.S. 18 Oct 10)
727
728 Float_t a304L[8]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,55.845};
729 Float_t z304L[8]={6.,25.,14.,15.,16., 28.,24.,26.};
730 Float_t w304L[8]={0.0003,0.02,0.01,0.00045,0.003,0.0925,0.19,0.6865};
731 Float_t d304L = 8.03;
732
733 //SDD HV microcable
734
735 Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
736 Float_t zHVm[5]={6.,1.,7.,8.,13.};
737 Float_t wHVm[5]={0.520088819984,0.01983871336,0.0551367996,0.157399667056, 0.247536};
738 Float_t dHVm = 1.6087;
739
740 //SDD LV+signal cable
741
742 Float_t aLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
743 Float_t zLVm[5]={6.,1.,7.,8.,13.};
744 Float_t wLVm[5]={0.21722436468,0.0082859922,0.023028867,0.06574077612, 0.68572};
745 Float_t dLVm = 2.1035;
746
747 //SDD hybrid microcab
748
749 Float_t aHLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
750 Float_t zHLVm[5]={6.,1.,7.,8.,13.};
751 Float_t wHLVm[5]={0.24281879711,0.00926228815,0.02574224025,0.07348667449, 0.64869};
752 Float_t dHLVm = 2.0502;
753
754 //SDD anode microcab
755
756 Float_t aALVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538};
757 Float_t zALVm[5]={6.,1.,7.,8.,13.};
758 Float_t wALVm[5]={0.392653705471,0.0128595919215,0.041626868025,0.118832707289, 0.431909};
759 Float_t dALVm = 2.0502;
760
761 //X7R capacitors - updated from F.Tosello's web page - M.S. 18 Oct 10
762
763 Float_t aX7R[6]={137.327,47.867,15.9994,58.6928,63.5460,118.710};
764 Float_t zX7R[6]={56.,22.,8.,28.,29.,50.};
765 Float_t wX7R[6]={0.524732,0.176736,0.179282,0.079750,0.019750,0.019750};
766 Float_t dX7R = 6.07914;
767
768 //X7R weld, i.e. Sn 60% Pb 40% (from F.Tosello's web page - M.S. 15 Oct 10)
769
770 Float_t aX7Rweld[2]={118.71 , 207.20};
771 Float_t zX7Rweld[2]={ 50. , 82. };
772 Float_t wX7Rweld[2]={ 0.60 , 0.40};
773 Float_t dX7Rweld = 8.52358;
774
775 // AIR
776
777 Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
778 Float_t zAir[4]={6.,7.,8.,18.};
779 Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
780 Float_t dAir = 1.20479E-3;
781
782 // Water
783
784 Float_t aWater[2]={1.00794,15.9994};
785 Float_t zWater[2]={1.,8.};
786 Float_t wWater[2]={0.111894,0.888106};
787 Float_t dWater = 1.0;
788
789 // CERAMICS
790 // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3
791 Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 };
792 Float_t zcer[5] = { 13., 8., 14., 25., 24. };
793 Float_t wcer[5] = {.4443408,.5213375,.0130872,.0178135,.003421};
794 Float_t denscer = 3.6;
795
796 //G10FR4
797
798 Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00, 22.00, 11.00, 19.00, 26.00, 9.00, 8.00, 6.00, 7.00, 1.00};
799 Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,10.8110000,47.8670000,22.9897700,39.0983000,55.8450000,18.9984000,15.9994000,12.0107000,14.0067000,1.0079400};
800 Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,0.01397570,0.00287685,0.00445114,0.00498089,0.00209828,0.00420000,0.36043788,0.27529426,0.01415852,0.03427566};
801 Float_t densG10FR4= 1.8;
802
803 //--- EPOXY --- C18 H19 O3
804 Float_t aEpoxy[3] = {15.9994, 1.00794, 12.0107} ;
805 Float_t zEpoxy[3] = { 8., 1., 6.} ;
806 Float_t wEpoxy[3] = { 3., 19., 18.} ;
807 Float_t dEpoxy = 1.8 ;
808
809 // rohacell: C9 H13 N1 O2
810 Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
811 Float_t zrohac[4] = { 6., 1., 7., 8.};
812 Float_t wrohac[4] = { 14., 10., 2., 6.};
4e579924 813 Float_t drohac = 0.058;
717cdf18 814
815 // If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then
816//
817// %Al=81.6164 %inox=100-%Al
818
819 Float_t aInAl[5] = {27., 55.847,51.9961,58.6934,28.0855 };
820 Float_t zInAl[5] = {13., 26.,24.,28.,14. };
821 Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182};
822 Float_t dInAl = 3.075;
823
824 // Aluminum alloy with 12% Copper - 21 Oct 10
825
826 Float_t aAlCu12[2] = {26.9815, 63.546};
827 Float_t zAlCu12[2] = {13. , 29. };
828 Float_t wAlCu12[2] = { 0.88 , 0.12 };
829 Float_t dAlCu12 = 2.96;
830
831 // Kapton
832
833 Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994};
834 Float_t zKapton[4]={1.,6.,7.,8.};
835 Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235};
836 Float_t dKapton = 1.42;
837
838 // Kapton + Cu (for Pixel Bus)
839
840 Float_t aKaptonCu[5]={1.00794, 12.0107, 14.010, 15.9994, 63.5460};
841 Float_t zKaptonCu[5]={1., 6., 7., 8., 29.};
842 Float_t wKaptonCuBus[5];
843
844 // Kapton + Cu (for Pixel MCM)
845
846 Float_t wKaptonCuMCM[5];
847
848 // Kapton + Cu (mix of two above)
849
850 Float_t wKaptonCuMix[5];
851
852 //SDD ruby sph.
853 Float_t aAlOxide[2] = { 26.981539,15.9994};
854 Float_t zAlOxide[2] = { 13., 8.};
855 Float_t wAlOxide[2] = {0.4707, 0.5293};
856 Float_t dAlOxide = 3.97;
857
858 // Silica for optical fibers: Si O2
859 Float_t aoptfib[2] = { 28.0855, 15.9994};
860 Float_t zoptfib[2] = { 14., 8. };
861 Float_t woptfib[2] = { 1., 2. };
862 Float_t doptfib = 2.55;
863
864 // Tetrafluorethylene-Perfluorpropylene (FEP) - 08 Mar 10
865 Float_t aFEP[2] = { 12.0107, 18.9984};
866 Float_t zFEP[2] = { 6. , 9. };
867 Float_t wFEP[2] = { 1. , 2. };
868 Float_t dFEP = 2.15;
869
870 // PVC (C2H3Cl)n - 08 Jul 10
871 Float_t aPVC[3] = { 12.0107, 1.00794, 35.4527};
872 Float_t zPVC[3] = { 6. , 1. , 35. };
873 Float_t wPVC[3] = { 2. , 3. , 1. };
874 Float_t dPVC = 1.3;
875
876 // PBT (Polybutylene terephthalate = C12-H12-O4) - 01 Sep 10
877 Float_t aPBT[3] = { 12.0107, 1.00794, 15.9994};
878 Float_t zPBT[3] = { 6. , 1. , 8. };
879 Float_t wPBT[3] = { 12. ,12. , 4. };
880 Float_t dPBT = 1.31;
881
882 // POLYAX (POLYAX = C37-H24-O6-N2) - 03 Sep 10
883 Float_t aPOLYAX[4] = { 12.0107, 1.00794, 15.9994, 14.00674};
884 Float_t zPOLYAX[4] = { 6. , 1. , 8. , 7. };
885 Float_t wPOLYAX[4] = { 37. ,24. , 6. , 2. };
886 Float_t dPOLYAX = 1.27;
887
888 // PPS (PPS = C6-H4-S) - 05 Sep 10
889 Float_t aPPS[3] = { 12.0107, 1.00794, 32.066};
890 Float_t zPPS[3] = { 6. , 1. , 16. };
891 Float_t wPPS[3] = { 6. , 4. , 1. };
892 Float_t dPPS = 1.35;
893
894 // Megolon (Polyolefin = (C-H2)n) - 20 Oct 10
895 Float_t aMegolon[2] = { 12.0107, 1.00794};
896 Float_t zMegolon[2] = { 6. , 1. };
897 Float_t wMegolon[2] = { 1. , 2. };
898 Float_t dMegolon = 1.51; // Mean of various types
899
900 // Standard glass (from glassproperties.com/glasses - M.S. 21 Oct 10)
901 Float_t aStdGlass[7] = {15.9994 ,28.0855 ,22.98977 ,40.078 ,
902 24.305 ,26.981539,39.0983 };
903 Float_t zStdGlass[7] = { 8. ,14. ,11. ,20. ,
904 12. ,13. ,19. };
905 Float_t wStdGlass[7] = { 0.468377, 0.348239, 0.096441, 0.071469,
906 0.006030, 0.005293, 0.004151};
907 Float_t dStdGlass = 2.53;
908
909 // Glass Fiber (from F.Tosello's web page - M.S. 15 Oct 10)
910 Float_t aGlass[11] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 ,
911 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,55.845};
912 Float_t zGlass[11] = { 8. ,14. ,20 ,13 , 5 ,
913 12. ,19 ,11 , 9 ,22 ,26 };
914 Float_t wGlass[11] = { 0.473610, 0.252415, 0.135791, 0.068803, 0.023293,
915 0.015076, 0.008301, 0.007419, 0.007000, 0.004795, 0.003497};
916 Float_t dGlass = 2.61;
917
918 // Ryton R-4 04 (from F.Tosello's web page - M.S. 15 Oct 10)
919 Float_t aRyton[14] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 ,
920 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,
921 55.845 ,12.0107 , 1.00794 ,32.066 };
922 Float_t zRyton[14] = { 8. ,14. ,20. ,13. , 5. ,
923 12. ,19. ,11. , 9. ,22. ,
924 26. , 6. , 1. ,16. };
925 Float_t wRyton[14] = { 0.189445, 0.100966, 0.054316, 0.027521, 0.009317,
926 0.006030, 0.003320, 0.002968, 0.002800, 0.001918,
927 0.001399, 0.399760, 0.022365, 0.177875};
928 Float_t dRyton = 1.65;
929
930 // Plexiglas (Poly(methyl methacrylate) (C5O2H8)n - M.S. 05 nov 10)
931 Float_t aPlexy[3] = { 12.0107, 15.9994, 1.00794};
932 Float_t zPlexy[3] = { 6. , 8. , 1. };
933 Float_t wPlexy[3] = { 5. , 2. , 8. };
934 Float_t dPlexy = 1.18;
935
936 //SSD NiSn capacitor ends
937 Float_t aNiSn[2] = { 56.6934,118.710};
938 Float_t zNiSn[2] = { 28., 50.};
939 Float_t wNiSn[2] = {0.33, 0.67};
940 Float_t dNiSn = wNiSn[0]*8.908 + wNiSn[1]*7.310;
941
39c2e170 942 // SPD cooling capillaries (Phynox)
943 Float_t aPhynox[5] = { 55.8450, 58.9332, 51.9961, 58.6934, 95.94 };
944 Float_t zPhynox[5] = { 26. , 27. , 24. , 28. , 42. };
945 Float_t wPhynox[5] = { 0.17 , 0.40 , 0.20 , 0.16 , 0.07 };
946 Float_t dPhynox = 8.3;
947
717cdf18 948 AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
949 AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
950
951 AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
952 AliMedium(2,"SPD SI CHIP$",2,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
953
954 AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
955 AliMedium(3,"SPD SI BUS$",3,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
956
957 AliMixture(4,"C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
958 AliMedium(4,"C (M55J)$",4,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
959
960 AliMixture(5,"AIR$",aAir,zAir,dAir,4,wAir);
961 AliMedium(5,"AIR$",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
962
963 AliMixture(6,"GEN AIR$",aAir,zAir,dAir,4,wAir);
964 AliMedium(6,"GEN AIR$",6,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
965
966 AliMixture(7,"SDD SI CHIP$",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP);
967 AliMedium(7,"SDD SI CHIP$",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
968
39c2e170 969 AliMixture(8,"PHYNOX$",aPhynox,zPhynox,dPhynox,5,wPhynox);
970 AliMedium(8,"PHYNOX$",8,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
971
717cdf18 972 AliMixture(9,"SDD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
973 AliMedium(9,"SDD C (M55J)$",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
974
975 AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir);
976 AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
977
978 AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
979 AliMedium(11,"AL$",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
980
981 AliMixture(12, "Water$",aWater,zWater,dWater,2,wWater);
982 AliMedium(12,"WATER$",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
983
b78b741f 984 AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre);
717cdf18 985 AliMedium(13,"Freon$",13,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
986
987 AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03);
988 AliMedium(14,"COPPER$",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
989 AliMixture(15,"CERAMICS$",acer,zcer,denscer,5,wcer);
990 AliMedium(15,"CERAMICS$",15,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
991
992 AliMixture(20,"SSD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
993 AliMedium(20,"SSD C (M55J)$",20,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
994
995 AliMixture(21,"SSD AIR$",aAir,zAir,dAir,4,wAir);
996 AliMedium(21,"SSD AIR$",21,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
997
998 AliMixture(25,"G10FR4$",aG10FR4,zG10FR4,densG10FR4,14,wG10FR4);
999 AliMedium(25,"G10FR4$",25,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1000
1001 AliMixture(26,"GEN C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
1002 AliMedium(26,"GEN C (M55J)$",26,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1003
1004 AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir);
1005 AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
1006
1007 AliMixture(35,"PLEXYGLAS$",aPlexy,zPlexy,dPlexy,-3,wPlexy);
1008 AliMedium(35,"PLEXYGLAS$",35,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1009
1010 AliMixture(36,"STDGLASS$",aStdGlass,zStdGlass,dStdGlass,7,wStdGlass);
1011 AliMedium(36,"STDGLASS$",36,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1012
1013 AliMixture(37,"ALCU12$",aAlCu12,zAlCu12,dAlCu12,2,wAlCu12);
1014 AliMedium(37,"ALCU12$",37,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1015
b78b741f 1016 AliMixture(38,"MEGOLON$",aMegolon,zMegolon,dMegolon,-2,wMegolon);
717cdf18 1017 AliMedium(38,"MEGOLON$",38,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1018
1019 AliMixture(39,"RYTON$",aRyton,zRyton,dRyton,14,wRyton);
1020 AliMedium(39,"RYTON$",39,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1021
1022 AliMixture(40,"GLASS FIBER$",aGlass,zGlass,dGlass,11,wGlass);
1023 AliMedium(40,"GLASS FIBER$",40,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1024
1025 AliMixture(41,"AISI304L$",a304L,z304L,d304L,8,w304L);
1026 AliMedium(41,"AISI304L$",41,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1027
1028 AliMaterial(42,"NICKEL$",0.58693E+02,0.28000E+02,0.89080E+01,0.14200E+01,0.99900E+03);
1029 AliMedium(42,"NICKEL$",42,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1030
1031 AliMixture(43,"SDD X7R weld$",aX7Rweld,zX7Rweld,dX7Rweld,2,wX7Rweld);
1032 AliMedium(43,"SDD X7R weld$",43,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1033
b78b741f 1034 AliMixture(44,"PPS$",aPPS,zPPS,dPPS,-3,wPPS);
717cdf18 1035 AliMedium(44,"PPS$",44,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1036
b78b741f 1037 AliMixture(45,"POLYAX$",aPOLYAX,zPOLYAX,dPOLYAX,-4,wPOLYAX);
717cdf18 1038 AliMedium(45,"POLYAX$",45,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1039
b78b741f 1040 AliMixture(46,"PBT$",aPBT,zPBT,dPBT,-3,wPBT);
717cdf18 1041 AliMedium(46,"PBT$",46,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1042
1043 AliMixture(47,"PVC$",aPVC,zPVC,dPVC,-3,wPVC);
1044 AliMedium(47,"PVC$",47,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1045
1046 Double_t cuFrac = 0.56;
1047 Double_t kFrac = 1.0 - cuFrac;
1048 Double_t cuDens = 8.96;
1049 Float_t dKaptonCuBus = cuFrac * cuDens + kFrac * dKapton;
1050 for (Int_t j=0; j<4; j++)
1051 wKaptonCuBus[j] = wKapton[j]*kFrac;
1052 wKaptonCuBus[4] = cuFrac;
1053 AliMixture(48, "SPD-BUS CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuBus, 5, wKaptonCuBus);
1054 AliMedium(48,"SPD-BUS CU KAPTON$",48,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1055
1056 cuFrac = 0.5;
1057 kFrac = 1.0 - cuFrac;
1058 Float_t dKaptonCuMCM = cuFrac * cuDens + kFrac * dKapton;
1059 for (Int_t j=0; j<4; j++)
1060 wKaptonCuMCM[j] = wKapton[j]*kFrac;
1061 wKaptonCuMCM[4] = cuFrac;
1062 AliMixture(49, "SPD-MCM CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMCM, 5, wKaptonCuMCM);
1063 AliMedium(49,"SPD-MCM CU KAPTON$",49,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1064
1065 cuFrac = (0.56 + 0.5) / 2.0;
1066 kFrac = 1.0 - cuFrac;
1067 Float_t dKaptonCuMix = cuFrac * cuDens + kFrac * dKapton;
1068 for (Int_t j=0; j<4; j++)
1069 wKaptonCuMix[j] = wKapton[j]*kFrac;
1070 wKaptonCuMix[4] = cuFrac;
1071 AliMixture(50, "SPD-MIX CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMix, 5, wKaptonCuMix);
1072 AliMedium(50,"SPD-MIX CU KAPTON$",50,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1073
1074 AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
1075 AliMedium(51,"SPD SI$",51,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
1076
1077 AliMaterial(52,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
1078 AliMedium(52,"SPD SI CHIP$",52,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
1079
1080 AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
1081 AliMedium(53,"SPD SI BUS$",53,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
1082
1083 AliMixture(54,"SPD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J);
1084 AliMedium(54,"SPD C (M55J)$",54,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1085
1086 AliMixture(55,"SPD AIR$",aAir,zAir,dAir,4,wAir);
1087 AliMedium(55,"SPD AIR$",55,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir);
1088
1089 AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
1090 AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1091
1092 // Gaseous Freon has same chemical composition but air density at 1.7 atm
b78b741f 1093 AliMixture(59,"GASEOUS FREON$",afre,zfre,1.7*dAir,-2,wfre);
717cdf18 1094 AliMedium(59,"GASEOUS FREON$",59,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1095
1096 AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy);
1097 AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1098
1099 AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
1100 AliMedium(62,"SILICON$",62,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi);
1101
1102 AliMixture(63, "KAPTONH(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
1103 AliMedium(63,"KAPTONH(POLYCH2)$",63,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1104
1105 AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03);
1106 AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1107
1108 AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX);
1109 AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1110
1111 AliMixture(66,"NiSn$",aNiSn,zNiSn,dNiSn,2,wNiSn);
1112 AliMedium(66,"NiSn$",66,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1113
1114 AliMaterial(67,"Sn$", 118.710, 50., 7.310, 1.206, 999.);
1115 AliMedium(67,"Sn$",67,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1116
1117 AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac);
1118 AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1119
1120 AliMixture(69,"SDD C AL (M55J)$",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J);
1121 AliMedium(69,"SDD C AL (M55J)$",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1122
1123 AliMixture(70, "SDDKAPTON (POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton);
1124 AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1125
1126 AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03);
1127 AliMedium(71,"ITS SANDW A$",71,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1128
1129 AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03);
1130 AliMedium(72,"ITS SANDW B$",72,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1131
1132 AliMaterial(73,"ITS SANDW C$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
1133 AliMedium(73,"ITS SANDW C$",73,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1134
1135 AliMaterial(74,"HEAT COND GLUE$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03);
1136 AliMedium(74,"HEAT COND GLUE$",74,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1137
1138 AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
1139 AliMedium(75,"ELASTO SIL$",75,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1140
1141 // SPD bus (data from Petra Riedler)
1142 Float_t aSPDbus[5] = {1.00794,12.0107,14.01,15.9994,26.982 };
1143 Float_t zSPDbus[5] = {1.,6.,7.,8.,13.};
1144 Float_t wSPDbus[5] = {0.023523,0.318053,0.009776,0.078057,0.570591};
1145 Float_t dSPDbus = 2.128505;
1146
1147 // AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03);
1148 AliMixture(76,"SPDBUS(AL+KPT+EPOX)$",aSPDbus,zSPDbus,dSPDbus,5,wSPDbus);
1149 AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1150
1151 AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,6,wX7R);
1152 AliMedium(77,"SDD X7R capacitors$",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1153
1154 AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide);
1155 AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1156
1157 AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03);
1158 AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1159
1160 AliMixture(80,"SDD HV microcable$",aHVm,zHVm,dHVm,5,wHVm);
1161 AliMedium(80,"SDD HV microcable$",80,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1162
1163 AliMixture(81,"SDD LV+signal cable$",aLVm,zLVm,dLVm,5,wLVm);
1164 AliMedium(81,"SDD LV+signal cable$",81,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1165
1166 AliMixture(82,"SDD hybrid microcab$",aHLVm, zHLVm,dHLVm,5,wHLVm);
1167 AliMedium(82,"SDD hybrid microcab$",82,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1168
1169 AliMixture(83,"SDD anode microcab$",aALVm,zALVm,dALVm,5,wALVm);
1170 AliMedium(83,"SDD anode microcab$",83,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1171 Float_t aDSring[4]={12.0107, 1.00794, 14.0067, 15.9994};
1172 Float_t zDSring[4]={ 6., 1., 7., 8.};
1173 Float_t wDSring[4]={ 0.854323888, 0.026408778, 0.023050265, 0.096217069};
1174 Float_t dDSring = 0.2875;
1175 AliMixture(84,"SDD/SSD rings$",aDSring,zDSring,dDSring,4,wDSring);
1176 AliMedium(84,"SDD/SSD rings$",84,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1177
1178 AliMixture(85,"inox/alum$",aInAl,zInAl,dInAl,5,wInAl);
1179 AliMedium(85,"inox/alum$",85,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1180
1181 // special media to take into account services in the SDD and SSD
1182 // cones for the FMD
1183 //Begin_Html
1184 /*
1185 <A HREF="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_MatBudget_4B.xls">
1186 </pre>
1187 <br clear=left>
1188 <font size=+2 color=blue>
1189 <p> The Exel spread sheet from which these density number come from.
1190 </font></A>
1191 */
1192 //End_Html
1193
1194 // AliMaterial(86,"AIRFMDSDD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
1195 Float_t aA[13],zZ[13],wW[13],den;
1196 // From Pierluigi Barberis calculations of 2SPD+1SDD October 2 2002.
1197 zZ[0] = 1.0; aA[0] = 1.00794; // Hydrogen
1198 zZ[1] = 6.0; aA[1] = 12.011; // Carbon
1199 zZ[2] = 7.0; aA[2] = 14.00674; // Nitrogen
1200 zZ[3] = 8.0; aA[3] = 15.9994; // Oxigen
1201 zZ[4] = 14.0; aA[4] = 28.0855; // Silicon
1202 zZ[5] = 24.0; aA[5] = 51.9961; //Cromium
1203 zZ[6] = 25.0; aA[6] = 54.938049; // Manganese
1204 zZ[7] = 26.0; aA[7] = 55.845; // Iron
1205 zZ[8] = 28.0; aA[8] = 58.6934; // Nickle
1206 zZ[9] = 29.0; aA[9] = 63.546; // Copper
1207 zZ[10] = 13.0; aA[10] = 26.981539; // Alulminum
1208 zZ[11] = 47.0; aA[11] = 107.8682; // Silver
1209 zZ[12] = 27.0; aA[12] = 58.9332; // Cobolt
1210 wW[0] = 0.019965;
1211 wW[1] = 0.340961;
1212 wW[2] = 0.041225;
1213 wW[3] = 0.200352;
1214 wW[4] = 0.000386;
1215 wW[5] = 0.001467;
1216 wW[6] = 0.000155;
1217 wW[7] = 0.005113;
1218 wW[8] = 0.000993;
1219 wW[9] = 0.381262;
1220 wW[10] = 0.008121;
1221 wW[11] = 0.000000;
1222 wW[12] = 0.000000;
1223 if(fByThick){// New values seeITS_MatBudget_4B.xls
1224 den = 1.5253276; // g/cm^3 Cell O370
1225 }else{
1226 den = 2.58423412; // g/cm^3 Cell L370
1227 } // end if fByThick
1228 //den = 6161.7/(3671.58978);//g/cm^3 Volume does not exclude holes
1229 AliMixture(86,"AIRFMDSDD$",aA,zZ,den,+11,wW);
1230 AliMedium(86,"AIRFMDSDD$",86,0,ifield,fieldm,tmaxfdAir,stemaxAir,
1231 deemaxAir,epsilAir,stminAir);
1232
1233 //AliMaterial(87,"AIRFMDSSD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03);
1234 // From Pierluigi Barberis calculations of SSD October 2 2002.
1235 wW[0] = 0.019777;
1236 wW[1] = 0.325901;
1237 wW[2] = 0.031848;
1238 wW[3] = 0.147668;
1239 wW[4] = 0.030609;
1240 wW[5] = 0.013993;
1241 wW[6] = 0.001479;
1242 wW[7] = 0.048792;
1243 wW[8] = 0.009477;
1244 wW[9] = 0.350697;
1245 wW[10] = 0.014546;
1246 wW[11] = 0.005213;
1247 wW[12] = 0.000000;
1248 if(fByThick){// New values seeITS_MatBudget_4B.xls
1249 den = 1.2464275; // g/cm^3 Cell O403
1250 }else{
1251 den = 1.28134409; // g/cm^3 Cell L403
1252 } // end if fByThick
1253 //den = 7666.3/(9753.553259); // volume does not exclude holes
1254 AliMixture(87,"AIRFMDSSD$",aA,zZ,den,+12,wW);
1255 AliMedium(87,"AIRFMDSSD$",87,0,ifield,fieldm,tmaxfdAir,stemaxAir,
1256 deemaxAir,epsilAir,stminAir);
1257
1258 //AliMaterial(88,"ITS SANDW CFMDSDD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
1259 // From Pierluigi Barberis calculations of 1SDD+Carbon fiber October 2 2002
1260 wW[0] = 0.016302;
1261 wW[1] = 0.461870;
1262 wW[2] = 0.033662;
1263 wW[3] = 0.163595;
1264 wW[4] = 0.000315;
1265 wW[5] = 0.001197;
1266 wW[6] = 0.000127;
1267 wW[7] = 0.004175;
1268 wW[8] = 0.000811;
1269 wW[9] = 0.311315;
1270 wW[10] = 0.006631;
1271 wW[11] = 0.000000;
1272 wW[12] = 0.000000;
1273 if(fByThick){// New values seeITS_MatBudget_4B.xls
1274 den = 1.9353276; // g/cm^3 Cell N370
1275 }else{
1276 den = 3.2788626; // g/cm^3 Cell F370
1277 } // end if fByThick
1278 //den = 7667.1/(3671.58978); // Volume does not excludeholes
1279 AliMixture(88,"ITS SANDW CFMDSDD$",aA,zZ,den,+11,wW);
1280 AliMedium(88,"ITS SANDW CFMDSDD$",88,0,ifield,fieldm,tmaxfd,stemax,
1281 deemax,epsil,stmin);
1282
1283 //AliMaterial(89,"ITS SANDW CFMDSSD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
1284 // From Pierluigi Barberis calculations of SSD+Carbon fiber October 2 2002.
1285 wW[0] = 0.014065;
1286 wW[1] = 0.520598;
1287 wW[2] = 0.022650;
1288 wW[3] = 0.105018;
1289 wW[4] = 0.021768;
1290 wW[5] = 0.009952;
1291 wW[6] = 0.001051;
1292 wW[7] = 0.034700;
1293 wW[8] = 0.006740;
1294 wW[9] = 0.249406;
1295 wW[10] = 0.010345;
1296 wW[11] = 0.0003707;
1297 wW[12] = 0.000000;
1298 if(fByThick){// New values seeITS_MatBudget_4B.xls
1299 den = 1.6564275; // g/cm^3 Cell N304
1300 }else{
1301 den = 1.7028296; // g/cm^3 Cell F304
1302 } // end if fByThick
1303 //den = 1166.5/(3671.58978); // Volume does not exclude holes
1304 AliMixture(89,"ITS SANDW CFMDSSD$",aA,zZ,den,+12,wW);
1305 AliMedium(89,"ITS SANDW CFMDSSD$",89,0,ifield,fieldm,tmaxfd,stemax,
1306 deemax,epsil,stmin);
1307
1308 //AliMaterial(97,"SPD SERVICES$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03);
1309 // From Pierluigi Barberis calculations of 1SPD October 2 2002.
1310 wW[0] = 0.005970;
1311 wW[1] = 0.304704;
1312 wW[2] = 0.042510;
1313 wW[3] = 0.121715;
1314 wW[4] = 0.001118;
1315 wW[5] = 0.030948;
1316 wW[6] = 0.003270;
1317 wW[7] = 0.107910;
1318 wW[8] = 0.020960;
1319 wW[9] = 0.360895;
1320 wW[10] = 0.000000;
1321 wW[11] = 0.000000;
1322 wW[12] = 0.000000;
1323 if(fByThick){// New values seeITS_MatBudget_4B.xls
1324 den = 80.31136576; // g/cm^3 Cell H329
1325 }else{
1326 den = 87.13062; // g/cm^3 Cell G329
1327 } // end if fByThick
1328 //den = 1251.3/(0.05*2.0*TMath::Pi()*(7.75*7.75 - 3.7*3.7)); // g/cm^3
1329 AliMixture(97,"SPD SERVICES$",aA,zZ,den,+10,wW);
1330 AliMedium(97,"SPD SERVICES$",97,0,ifield,fieldm,tmaxfd,stemax,
1331 deemax,epsil,stmin);
1332
1333
1334 // Special media
1335
1336 AliMaterial(90,"SPD shield$", 12.011, 6., 1.93 , 22.36, 999);
1337 AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1338
1339 // SPD End Ladder (data from Petra Riedler)
1340 Float_t aSPDel[5] = {1.00794,12.0107,14.01,15.9994,63.54 };
1341 Float_t zSPDel[5] = {1.,6.,7.,8.,29.};
1342 Float_t wSPDel[5] = {0.004092,0.107274,0.011438,0.032476,0.844719};
1343 Float_t dSPDel = 3.903403;
1344
1345 // AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999);
1346 AliMixture(91,"SPD End ladder$",aSPDel,zSPDel,dSPDel,5,wSPDel);
1347 AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1348
1349 AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999);
1350 AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1351 /* Material with fractional Z not actually used
1352 AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999);
1353 AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1354 */
1355 AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999);
1356 AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1357 /* Material with fractional Z not actually used
1358 AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999);
1359 AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1360 */
1361 AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999);
1362 AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ);
1363
1364 AliMixture(98,"SDD OPTICFIB$",aoptfib,zoptfib,doptfib,-2,woptfib);
1365 AliMedium(98,"SDD OPTICFIB$",98,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1366
b78b741f 1367 AliMixture(95,"SSD FEP$",aFEP,zFEP,dFEP,-2,wFEP);
717cdf18 1368 AliMedium(95,"SSD FEP$",95,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1369
1370 // Mean material for low-voltage cables on SPD trays Side A
1371 // (Copper + PolyEthylene (C2-H4)) (D.Elia for cable number and
1372 // cross-section area, M.Sitta for elemental computation) - 26 Feb 10
1373 wW[0] = 0.323024;//H
1374 wW[2] = 0.515464;//Cu
1375 wW[1] = 0.161512;//C
1376 wW[3] = 0.000000;//O
1377 wW[4] = 0.000000;//S
1378 wW[5] = 0.000000;//F
1379 wW[6] = 0.000000;//Sn
1380 wW[7] = 0.000000;//Pb
1381 wW[8] = 0.000000;//Cr
1382 wW[9] = 0.000000;//Si
1383 wW[10] = 0.000000;//Ni
1384 wW[11] = 0.000000;//Ca
1385
1386 den = 5.078866;
1387 AliMixture(60,"SPD_LOWCABLES$",aA,zZ,den,+3,wW);
1388 AliMedium(60,"SPD_LOWCABLES$",60,0,ifield,fieldm,tmaxfd,stemax,
1389 deemax,epsil,stmin);
1390
1391 // Mean material for high-voltage cables on SPD trays Side A & C
1392 // (Copper + HD PolyEthylene (C2-H2)) (D.Elia for cable number and
1393 // cross-section area, M.Sitta for elemental computation) - 10 Jun 10
1394 wW[0] = 0.083766;//H
1395 wW[2] = 0.417136;//Cu
1396 wW[1] = 0.499098;//C
1397 wW[3] = 0.000000;//O
1398 wW[4] = 0.000000;//S
1399 wW[5] = 0.000000;//F
1400 wW[6] = 0.000000;//Sn
1401 wW[7] = 0.000000;//Pb
1402 wW[8] = 0.000000;//Cr
1403 wW[9] = 0.000000;//Si
1404 wW[10] = 0.000000;//Ni
1405 wW[11] = 0.000000;//Ca
1406
1407 den = 1.514930;
1408 AliMixture(58,"SPD_HICABLES$",aA,zZ,den,+3,wW);
1409 AliMedium(58,"SPD_HICABLES$",58,0,ifield,fieldm,tmaxfd,stemax,
1410 deemax,epsil,stmin);
1411
1412 // PolyUrethane [C25-H42-N2-O6] - 07 Mar 10
1413 zZ[2] = 7.0; aA[2] = 14.0067; // Nitrogen - From Root TGeoElementTable
1414
1415 wW[0] = 0.090724;//H
1416 wW[2] = 0.060035;//N
1417 wW[1] = 0.643513;//C
1418 wW[3] = 0.205728;//O
1419 wW[4] = 0.000000;//S
1420 wW[5] = 0.000000;//F
1421 wW[6] = 0.000000;//Sn
1422 wW[7] = 0.000000;//Pb
1423 wW[8] = 0.000000;//Cr
1424 wW[9] = 0.000000;//Si
1425 wW[10] = 0.000000;//Ni
1426 wW[11] = 0.000000;//Ca
1427
1428 den = 1.158910;
1429 AliMixture(67,"POLYURETHANE$",aA,zZ,den,+4,wW);
1430 AliMedium(67,"POLYURETHANE$",67,0,ifield,fieldm,tmaxfd,stemax,
1431 deemax,epsil,stmin);
1432
1433 // POM (Polyoxymethylene = (CH2O)n ) - 02 May 10
1434 zZ[2] = 8.0; aA[2] = 15.9994; // Oxigen
1435
1436 wW[0] = 0.067137;//H
1437 wW[1] = 0.400016;//C
1438 wW[2] = 0.532847;//O
1439 wW[3] = 0.000000;//O
1440 wW[4] = 0.000000;//S
1441 wW[5] = 0.000000;//F
1442 wW[6] = 0.000000;//Sn
1443 wW[7] = 0.000000;//Pb
1444 wW[8] = 0.000000;//Cr
1445 wW[9] = 0.000000;//Si
1446 wW[10] = 0.000000;//Ni
1447 wW[11] = 0.000000;//Ca
1448
b78b741f 1449 den = 1.4200;
717cdf18 1450 AliMixture(57,"POLYOXYMETHYLENE$",aA,zZ,den,+3,wW);
1451 AliMedium(57,"POLYOXYMETHYLENE$",57,0,ifield,fieldm,tmaxfd,stemax,
1452 deemax,epsil,stmin);
1453
1454
1455 // Anticorodal (Aliminum alloy) - 08 nov 10
1456 // A,Z from Root TGeoElementTable, W from Web sites
1457 zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
1458 zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
1459 zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
1460 zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
1461 zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
1462 zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
1463 zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
1464 zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
1465 zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
1466
1467 wW[1] = 0.001000;//Cu
1468 wW[2] = 0.005000;//Fe
1469 wW[3] = 0.007000;//Mn - mean value
1470 wW[4] = 0.009000;//Mg - mean value
1471 wW[5] = 0.001000;//Si - mean value
1472 wW[6] = 0.002000;//Zn
1473 wW[7] = 0.002500;//Cr
1474 wW[8] = 0.001000;//Ti
1475
1476 Double_t totFrac = 0;
1477 for (Int_t j=1; j<9; j++)
1478 totFrac += wW[j];
1479 wW[0] = 1. - totFrac;//Al - the remainder
1480
b78b741f 1481 den = 2.69;
717cdf18 1482 AliMixture(93,"ANTICORODAL$",aA,zZ,den,+9,wW);
1483 AliMedium(93,"ANTICORODAL$",93,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1484
1485 // Hokotol (another Aluminium alloy) - 08 nov 10
1486 // A,Z from Root TGeoElementTable, W from Web sites
1487 zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
1488 zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
1489 zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
1490 zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
1491 zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
1492 zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
1493 zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
1494 zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
1495 zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
1496 zZ[9] = 40.0; aA[9] = 91.224 ; // Zirconium
1497
1498 wW[1] = 0.020500;//Cu - mean value
1499 wW[2] = 0.000300;//Fe
1500 wW[3] = 0.022000;//Mn - mean value
1501 wW[4] = 0.001000;//Mg - mean value
1502 wW[5] = 0.002000;//Si - mean value
1503 wW[6] = 0.066500;//Zn
1504 wW[7] = 0.005000;//Cr
1505 wW[8] = 0.000600;//Ti
1506 wW[9] = 0.001650;//Zr - mean value
1507
1508 totFrac = 0;
1509 for (Int_t j=1; j<10; j++)
1510 totFrac += wW[j];
1511 wW[0] = 1. - totFrac;//Al - the remainder
1512
1513 den = 2.69;
1514 AliMixture(34,"HOKOTOL$",aA,zZ,den,+10,wW);
1515 AliMedium(34,"HOKOTOL$",34,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1516
1517 // Ergal (7075) (yet another Aluminium alloy) - 09 nov 10
1518 // A,Z from Root TGeoElementTable, W from Web sites
1519 zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium
1520 zZ[1] = 29.0; aA[1] = 63.546 ; // Copper
1521 zZ[2] = 26.0; aA[2] = 55.845 ; // Iron
1522 zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese
1523 zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium
1524 zZ[5] = 14.0; aA[5] = 28.0855; // Silicon
1525 zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc
1526 zZ[7] = 24.0; aA[7] = 51.9961; // Chromium
1527 zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium
1528
1529 wW[1] = 0.016000;//Cu - mean value
1530 wW[2] = 0.005000;//Fe
1531 wW[3] = 0.003000;//Mn
1532 wW[4] = 0.025000;//Mg - mean value
1533 wW[5] = 0.004000;//Si
1534 wW[6] = 0.056000;//Zn - mean value
1535 wW[7] = 0.002300;//Cr - mean value
1536 wW[8] = 0.002000;//Ti
1537
1538 totFrac = 0;
1539 for (Int_t j=1; j<9; j++)
1540 totFrac += wW[j];
1541 wW[0] = 1. - totFrac;//Al - the remainder
1542
1543 den = 2.69;
1544 AliMixture(33,"ERGAL$",aA,zZ,den,+9,wW);
1545 AliMedium(33,"ERGAL$",33,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin);
1546
dfefbaec 1547}
b7943f00 1548
dfefbaec 1549//______________________________________________________________________
717cdf18 1550void AliITSv11::Init()
1551{
1552 // Initialise the ITS after it has been created.
1553 // Inputs:
1554 // none.
1555 // Outputs:
1556 // none.
1557 // Return:
1558 // none.
b7943f00 1559
012f0f4c 1560 UpdateInternalGeometry();
1561 AliITS::Init();
012f0f4c 1562
2942f542 1563 fIDMother = TVirtualMC::GetMC()->VolId("ITSV"); // ITS Mother Volume ID.
dfefbaec 1564}
b7943f00 1565
dfefbaec 1566//______________________________________________________________________
717cdf18 1567void AliITSv11::SetDefaults()
1568{
1569 // sets the default segmentation, response, digit and raw cluster classes
1570 // Inputs:
1571 // none.
1572 // Outputs:
1573 // none.
1574 // Return:
1575 // none.
b7943f00 1576
717cdf18 1577 if(!fDetTypeSim){
1578 Warning("SetDefaults","Error fDetTypeSim not defined");
1579 return;
108bd0fe 1580 }
717cdf18 1581
531d6cdc 1582 fDetTypeSim->SetDefaults();
1583
717cdf18 1584
531d6cdc 1585 if(fgkNTYPES>3){
1586 Warning("SetDefaults",
1587 "Only the four basic detector types are initialised!");
1588 }// end if
531d6cdc 1589 return;
dfefbaec 1590}
b7943f00 1591
dfefbaec 1592//______________________________________________________________________
717cdf18 1593void AliITSv11::StepManager()
1594{
1595 // Called for every step in the ITS, then calles the AliITShit class
1596 // creator with the information to be recoreded about that hit.
1597 // The value of the macro ALIITSPRINTGEOM if set to 1 will allow the
1598 // printing of information to a file which can be used to create a .det
1599 // file read in by the routine CreateGeometry(). If set to 0 or any other
1600 // value except 1, the default behavior, then no such file is created nor
1601 // it the extra variables and the like used in the printing allocated.
1602 // Inputs:
1603 // none.
1604 // Outputs:
1605 // none.
1606 // Return:
1607 // none.
531d6cdc 1608
717cdf18 1609 if(!(this->IsActive())) return;
2942f542 1610 if(!(TVirtualMC::GetMC()->TrackCharge())) return;
531d6cdc 1611
717cdf18 1612 Int_t copy, lay = 0;
2942f542 1613 Int_t id = TVirtualMC::GetMC()->CurrentVolID(copy);
717cdf18 1614
1615 Bool_t notSens = kFALSE;
1616 while ((lay<fIdN) && (notSens = id != fIdSens[lay])) ++lay;
1617 if (notSens) return;
531d6cdc 1618
2942f542 1619 if(TVirtualMC::GetMC()->IsTrackExiting()) {
e6add757 1620 AddTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber(), AliTrackReference::kITS);
531d6cdc 1621 } // if Outer ITS mother Volume
1622
717cdf18 1623 static TLorentzVector position, momentum; // Saves on calls to construtors
1624 static AliITShit hit;// Saves on calls to constructors
531d6cdc 1625
717cdf18 1626 TClonesArray &lhits = *(Hits());
1627 Int_t cpn0, cpn1, mod, status = 0;
531d6cdc 1628 //
1629 // Track status
2942f542 1630 if(TVirtualMC::GetMC()->IsTrackInside()) status += 1;
1631 if(TVirtualMC::GetMC()->IsTrackEntering()) status += 2;
1632 if(TVirtualMC::GetMC()->IsTrackExiting()) status += 4;
1633 if(TVirtualMC::GetMC()->IsTrackOut()) status += 8;
1634 if(TVirtualMC::GetMC()->IsTrackDisappeared()) status += 16;
1635 if(TVirtualMC::GetMC()->IsTrackStop()) status += 32;
1636 if(TVirtualMC::GetMC()->IsTrackAlive()) status += 64;
717cdf18 1637
531d6cdc 1638 //
717cdf18 1639 // retrieve the indices with the volume path
1640 //
1641 switch (lay) {
1642 case 0:case 1: // SPD
2942f542 1643 TVirtualMC::GetMC()->CurrentVolOffID(1,copy); // ladder
1644 TVirtualMC::GetMC()->CurrentVolOffID(3,cpn1); // stave
1645 TVirtualMC::GetMC()->CurrentVolOffID(5,cpn0); // sector
717cdf18 1646 break;
1647 case 2:case 3: // SDD
1648 copy = 1;
2942f542 1649 TVirtualMC::GetMC()->CurrentVolOffID(2,cpn1);
1650 TVirtualMC::GetMC()->CurrentVolOffID(3,cpn0);
717cdf18 1651 break;
1652 case 4:case 5: // SSD
1653 copy = 1;
2942f542 1654 TVirtualMC::GetMC()->CurrentVolOffID(1,cpn1);
1655 TVirtualMC::GetMC()->CurrentVolOffID(2,cpn0);
717cdf18 1656 break;
1657 default:
1658 AliError(Form("Invalid value: lay= %d . Not an ITS sensitive volume",lay));
1659 return; // not an ITS sensitive volume.
1660 } //
1661
1662 fInitGeom.DecodeDetector(mod,lay+1,cpn0,cpn1,copy);
1663 // We should not need to pass by the switch !
1664 // This is time consuming...
1665 // therefore DecodeDetectorv11(...) shouldn't be private !
1666 // and we should be able to use instead :
1667 //fInitGeom.DecodeDetectorv11(mod,lay+1,cpn0,cpn1,copy);
108bd0fe 1668
531d6cdc 1669 //
717cdf18 1670 // Fill hit structure.
1671 //
1672 hit.SetModule(mod);
1673 hit.SetTrack(gAlice->GetMCApp()->GetCurrentTrackNumber());
2942f542 1674 TVirtualMC::GetMC()->TrackPosition(position);
1675 TVirtualMC::GetMC()->TrackMomentum(momentum);
717cdf18 1676 hit.SetPosition(position);
2942f542 1677 hit.SetTime(TVirtualMC::GetMC()->TrackTime());
717cdf18 1678 hit.SetMomentum(momentum);
1679 hit.SetStatus(status);
2942f542 1680 hit.SetEdep(TVirtualMC::GetMC()->Edep());
717cdf18 1681 hit.SetShunt(GetIshunt());
2942f542 1682 if(TVirtualMC::GetMC()->IsTrackEntering()){
717cdf18 1683 hit.SetStartPosition(position);
2942f542 1684 hit.SetStartTime(TVirtualMC::GetMC()->TrackTime());
717cdf18 1685 hit.SetStartStatus(status);
1686 return; // don't save entering hit.
531d6cdc 1687 } // end if IsEntering
1688 // Fill hit structure with this new hit.
717cdf18 1689 //Info("StepManager","Calling Copy Constructor");
1690 new(lhits[fNhits++]) AliITShit(hit); // Use Copy Construtor.
1691 // Save old position... for next hit.
1692 hit.SetStartPosition(position);
2942f542 1693 hit.SetStartTime(TVirtualMC::GetMC()->TrackTime());
717cdf18 1694 hit.SetStartStatus(status);
531d6cdc 1695
b7943f00 1696 return;
531d6cdc 1697}