| 108bd0fe |
1 | /************************************************************************** |
| e9ae6a14 |
2 | * Copyright(c) 2007-2009, ALICE Experiment at CERN, All rights reserved. * |
| 108bd0fe |
3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| 7ab0715c |
16 | |
| cc8a4c78 |
17 | /* $Id$ */ |
| 7ab0715c |
18 | |
| 19 | |
| 8f8273a4 |
20 | //======================================================================== |
| 21 | // |
| 22 | // Geometry of the Inner Tracking System |
| b0c0f648 |
23 | // --------------------------------------- |
| 8f8273a4 |
24 | // This geometry is a mix between the old geometry (originally coded |
| 25 | // in AliITSvPPRasymmFMD) and the new TGeo geometry (v11). |
| 26 | // The flags which indicate whether the old or the new part is used |
| 27 | // is set in AliITSInitGeometry.cxx |
| 28 | // |
| 29 | // Ludovic Gaudichet (gaudichet@to.infn.it) |
| 30 | // |
| 31 | //======================================================================== |
| 32 | |
| 33 | |
| 012f0f4c |
34 | |
| 54c9a3d9 |
35 | // $Log: AliITSv11Hybrid.cxx,v $ |
| 36 | // Revision 1.14 2008/01/10 11:14:13 masera |
| 37 | // SPD/SDD thermal shield and SPD cones updated (M. Sitta) |
| 38 | // |
| a275e8ba |
39 | // Revision 1.13 2007/12/20 16:58:46 masera |
| 40 | // bug fixes for SPD1 and SDD1 (A. Dainese) |
| 41 | // |
| 3bc3f729 |
42 | // Revision 1.12 2007/12/17 14:48:23 masera |
| 43 | // Thermal shield between SPD and SDD (M. Sitta) |
| 44 | // |
| b0c0f648 |
45 | // Revision 1.11 2007/11/22 08:32:48 masera |
| 46 | // Second thermal shield updated in agreement with the installed one. Correction concerning the chemical composition of Rohacell (M.Sitta) |
| 47 | // |
| 074b8e6f |
48 | // Revision 1.10 2007/11/19 17:01:26 masera |
| 49 | // SSD ladder supports + endcaps systems (E. Cattaruzza) |
| 50 | // |
| e5bf64ae |
51 | // Revision 1.9 2007/10/21 19:22:53 masera |
| 52 | // Coding conventions |
| 53 | // |
| 7ab0715c |
54 | // Revision 1.8 2007/10/21 18:59:10 masera |
| 55 | // SPD new geometry added to Hybrid V11 |
| 56 | // |
| dbfc6ce6 |
57 | // Revision 1.7 2007/08/24 14:32:57 hristov |
| 58 | // Introduction of SPD half-stave volumes, cleaning and new code (in relation to new SPD geometry) in AliITSv11Hybrid (Ludovic) |
| 59 | // |
| 8f8273a4 |
60 | // Revision 1.6 2007/07/27 08:12:39 morsch |
| 61 | // Write all track references into the same branch. |
| 62 | // |
| e6add757 |
63 | // Revision 1.5 2007/06/28 10:17:25 masera |
| 64 | // Introduction of the new SSD geometry in simulation (AliITSv11Hybrid) and suppression of overlaps between old and new parts |
| 65 | // |
| bf210566 |
66 | // Revision 1.4 2007/05/09 20:40:41 masera |
| 67 | // Bug fix (V11Hybrid geometry) |
| 68 | // |
| 75473741 |
69 | // Revision 1.3 2007/05/08 16:57:42 masera |
| 70 | // Updates concerning the geometry: versioning system, new V11hybrid version, bug fixes (B.Nilsend and L. Gaudichet |
| 71 | // |
| 108bd0fe |
72 | |
| 108bd0fe |
73 | #include <TClonesArray.h> |
| f7a1cc68 |
74 | #include <TGeoGlobalMagField.h> |
| 7dd2cbe4 |
75 | #include <TGeoManager.h> |
| 108bd0fe |
76 | #include <TGeoMatrix.h> |
| 77 | #include <TGeoPhysicalNode.h> |
| 108bd0fe |
78 | #include <TGeoVolume.h> |
| b0c0f648 |
79 | #include <TGeoXtru.h> |
| 7dd2cbe4 |
80 | #include <TLorentzVector.h> |
| 81 | #include <TString.h> |
| 108bd0fe |
82 | #include <TVirtualMC.h> |
| 83 | |
| 84 | #include "AliITS.h" |
| 85 | #include "AliITSDetTypeSim.h" |
| 108bd0fe |
86 | #include "AliITShit.h" |
| 108bd0fe |
87 | #include "AliITSCalibrationSDD.h" |
| 108bd0fe |
88 | #include "AliITSsegmentationSDD.h" |
| 89 | #include "AliITSsegmentationSPD.h" |
| 90 | #include "AliITSsegmentationSSD.h" |
| 91 | #include "AliITSv11Hybrid.h" |
| 92 | #include "AliLog.h" |
| 93 | #include "AliMC.h" |
| 94 | #include "AliMagF.h" |
| 95 | #include "AliRun.h" |
| 96 | #include "AliTrackReference.h" |
| 97 | #include "AliITSInitGeometry.h" |
| 8f8273a4 |
98 | #include "AliITSv11GeometrySPD.h" |
| 108bd0fe |
99 | #include "AliITSv11GeometrySDD.h" |
| bf210566 |
100 | #include "AliITSv11GeometrySSD.h" |
| a275e8ba |
101 | #include "AliITSv11GeometrySupport.h" |
| b2e5530c |
102 | #include "AliGeomManager.h" |
| 108bd0fe |
103 | |
| 104 | |
| 108bd0fe |
105 | ClassImp(AliITSv11Hybrid) |
| 106 | |
| 107 | //______________________________________________________________________ |
| 108 | AliITSv11Hybrid::AliITSv11Hybrid(): |
| 108bd0fe |
109 | fByThick(kTRUE), |
| 110 | fMajorVersion(IsVersion()), |
| 111 | fMinorVersion(-1), |
| 112 | fDet1(0), |
| 113 | fDet2(0), |
| 114 | fChip1(0), |
| 115 | fChip2(0), |
| 116 | fRails(0), |
| 117 | fFluid(0), |
| 118 | fIDMother(0), |
| 012f0f4c |
119 | fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion), |
| 8f8273a4 |
120 | fSPDgeom(0), |
| bf210566 |
121 | fSDDgeom(0), |
| a275e8ba |
122 | fSSDgeom(0), |
| 123 | fSupgeom(0) |
| 108bd0fe |
124 | { |
| 012f0f4c |
125 | // Standard default constructor |
| 108bd0fe |
126 | // Inputs: |
| 127 | // none. |
| 128 | // Outputs: |
| 129 | // none. |
| 130 | // Return: |
| 131 | // none. |
| 108bd0fe |
132 | } |
| 8f8273a4 |
133 | |
| 134 | //______________________________________________________________________ |
| 135 | AliITSv11Hybrid::AliITSv11Hybrid(const char *title) |
| 136 | : AliITS("ITS", title), |
| 8f8273a4 |
137 | fByThick(kTRUE), |
| 138 | fMajorVersion(IsVersion()), |
| 139 | fMinorVersion(1), |
| 140 | fDet1(200.0), |
| 141 | fDet2(200.0), |
| 142 | fChip1(150.0), |
| 143 | fChip2(150.0), |
| 144 | fRails(0), |
| 145 | fFluid(1), |
| 146 | fIDMother(0), |
| 147 | fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion), |
| 148 | fSPDgeom(0), |
| 149 | fSDDgeom(0), |
| a275e8ba |
150 | fSSDgeom(0), |
| 151 | fSupgeom(0) |
| 152 | { |
| 8f8273a4 |
153 | // Standard constructor for the v11Hybrid geometry. |
| 154 | // Inputs: |
| 155 | // const char * title Arbitrary title |
| 156 | // Outputs: |
| 157 | // none. |
| 158 | // Return: |
| 159 | // none. |
| 160 | Int_t i; |
| 161 | |
| 162 | fSPDgeom = new AliITSv11GeometrySPD(); |
| 163 | fSDDgeom = new AliITSv11GeometrySDD(0); |
| 164 | fSSDgeom = new AliITSv11GeometrySSD(); |
| a275e8ba |
165 | fSupgeom = new AliITSv11GeometrySupport(); |
| 8f8273a4 |
166 | |
| 167 | fIdN = 6; |
| 168 | fIdName = new TString[fIdN]; |
| 169 | |
| 170 | if (AliITSInitGeometry::SPDIsTGeoNative()) { |
| dbfc6ce6 |
171 | fIdName[0] = fSPDgeom->GetSenstiveVolumeName1(); |
| 172 | fIdName[1] = fSPDgeom->GetSenstiveVolumeName2(); |
| 8f8273a4 |
173 | } else { |
| 174 | fIdName[0] = "ITS1"; |
| 175 | fIdName[1] = "ITS2"; |
| 176 | } |
| 177 | |
| 178 | if (AliITSInitGeometry::SDDIsTGeoNative()) { |
| 179 | fIdName[2] = fSDDgeom->GetSenstiveVolumeName3(); |
| 180 | fIdName[3] = fSDDgeom->GetSenstiveVolumeName4(); |
| 181 | } else { |
| 182 | fIdName[2] = "ITS3"; |
| 183 | fIdName[3] = "ITS4"; |
| 184 | } |
| 185 | |
| 186 | if (AliITSInitGeometry::SSDIsTGeoNative()) { |
| 187 | fIdName[4] = fSSDgeom->GetSenstiveVolumeName5(); |
| 188 | fIdName[5] = fSSDgeom->GetSenstiveVolumeName6(); |
| 189 | } else { |
| 190 | fIdName[4] = "ITS5"; |
| 191 | fIdName[5] = "ITS6"; |
| 192 | } |
| 193 | |
| 194 | fIdSens = new Int_t[fIdN]; |
| 195 | for(i=0;i<fIdN;i++) fIdSens[i] = 0; |
| 196 | SetThicknessDet1(); |
| 197 | SetThicknessDet2(); |
| 198 | SetThicknessChip1(); |
| 199 | SetThicknessChip2(); |
| 200 | SetDensityServicesByThickness(); |
| 201 | |
| 8f8273a4 |
202 | } |
| 203 | |
| 108bd0fe |
204 | //______________________________________________________________________ |
| 205 | AliITSv11Hybrid::AliITSv11Hybrid(const char *name, const char *title) |
| 206 | : AliITS("ITS", title), |
| 108bd0fe |
207 | fByThick(kTRUE), |
| 208 | fMajorVersion(IsVersion()), |
| 8f8273a4 |
209 | fMinorVersion(1), |
| 210 | fDet1(200.0), |
| 211 | fDet2(200.0), |
| 212 | fChip1(150.0), |
| 213 | fChip2(150.0), |
| 108bd0fe |
214 | fRails(0), |
| 8f8273a4 |
215 | fFluid(1), |
| 108bd0fe |
216 | fIDMother(0), |
| 012f0f4c |
217 | fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion), |
| 8f8273a4 |
218 | fSPDgeom(0), |
| bf210566 |
219 | fSDDgeom(0), |
| a275e8ba |
220 | fSSDgeom(0), |
| 221 | fSupgeom(0) |
| 222 | { |
| 012f0f4c |
223 | // Standard constructor for the v11Hybrid geometry. |
| 108bd0fe |
224 | // Inputs: |
| 225 | // const char * name Ignored, set to "ITS" |
| 226 | // const char * title Arbitrary title |
| 227 | // Outputs: |
| 228 | // none. |
| 229 | // Return: |
| 230 | // none. |
| 231 | Int_t i; |
| bf210566 |
232 | |
| 8f8273a4 |
233 | fSPDgeom = new AliITSv11GeometrySPD(); |
| bf210566 |
234 | fSDDgeom = new AliITSv11GeometrySDD(0); |
| 235 | fSSDgeom = new AliITSv11GeometrySSD(); |
| a275e8ba |
236 | fSupgeom = new AliITSv11GeometrySupport(); |
| 108bd0fe |
237 | |
| 238 | fIdN = 6; |
| 239 | fIdName = new TString[fIdN]; |
| 8f8273a4 |
240 | |
| 241 | (void) name; // removes warning message |
| 242 | |
| 243 | if (AliITSInitGeometry::SPDIsTGeoNative()) { |
| dbfc6ce6 |
244 | fIdName[0] = fSPDgeom->GetSenstiveVolumeName1(); |
| 245 | fIdName[1] = fSPDgeom->GetSenstiveVolumeName2(); |
| 8f8273a4 |
246 | } else { |
| 247 | fIdName[0] = "ITS1"; |
| 248 | fIdName[1] = "ITS2"; |
| 249 | } |
| 250 | |
| 108bd0fe |
251 | if (AliITSInitGeometry::SDDIsTGeoNative()) { |
| 252 | fIdName[2] = fSDDgeom->GetSenstiveVolumeName3(); |
| 253 | fIdName[3] = fSDDgeom->GetSenstiveVolumeName4(); |
| 254 | } else { |
| 255 | fIdName[2] = "ITS3"; |
| 256 | fIdName[3] = "ITS4"; |
| 257 | } |
| bf210566 |
258 | |
| 259 | if (AliITSInitGeometry::SSDIsTGeoNative()) { |
| 260 | fIdName[4] = fSSDgeom->GetSenstiveVolumeName5(); |
| 261 | fIdName[5] = fSSDgeom->GetSenstiveVolumeName6(); |
| 262 | } else { |
| 263 | fIdName[4] = "ITS5"; |
| 264 | fIdName[5] = "ITS6"; |
| 265 | } |
| 108bd0fe |
266 | |
| 108bd0fe |
267 | fIdSens = new Int_t[fIdN]; |
| 268 | for(i=0;i<fIdN;i++) fIdSens[i] = 0; |
| 269 | SetThicknessDet1(); |
| 270 | SetThicknessDet2(); |
| 271 | SetThicknessChip1(); |
| 272 | SetThicknessChip2(); |
| 273 | SetDensityServicesByThickness(); |
| 274 | |
| 108bd0fe |
275 | } |
| 8f8273a4 |
276 | |
| 108bd0fe |
277 | //______________________________________________________________________ |
| 278 | AliITSv11Hybrid::~AliITSv11Hybrid() { |
| 279 | // Standard destructor |
| 280 | // Inputs: |
| 281 | // none. |
| 282 | // Outputs: |
| 283 | // none. |
| 284 | // Return: |
| 285 | // none. |
| 8f8273a4 |
286 | delete fSPDgeom; |
| 108bd0fe |
287 | delete fSDDgeom; |
| bf210566 |
288 | delete fSSDgeom; |
| a275e8ba |
289 | delete fSupgeom; |
| 108bd0fe |
290 | } |
| 291 | |
| 292 | //______________________________________________________________________ |
| b2e5530c |
293 | void AliITSv11Hybrid::SetT2Lmatrix(Int_t uid, Double_t yShift, |
| bf210566 |
294 | Bool_t yFlip, Bool_t yRot180) |
| 108bd0fe |
295 | const { |
| 296 | |
| 297 | // |
| 298 | // Creates the TGeo Local to Tracking transformation matrix |
| 299 | // and sends it to the corresponding TGeoPNEntry |
| 300 | // |
| 301 | // This function is used in AddAlignableVolumes() |
| 302 | |
| b2e5530c |
303 | TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntryByUID(uid); |
| 304 | TGeoHMatrix* globMatrix = alignableEntry->GetGlobalOrig(); |
| 108bd0fe |
305 | |
| 306 | Double_t *gtrans = globMatrix->GetTranslation(), rotMatrix[9]; |
| 307 | memcpy(&rotMatrix[0], globMatrix->GetRotationMatrix(), 9*sizeof(Double_t)); |
| bf210566 |
308 | Double_t al = TMath::ATan2(rotMatrix[1],rotMatrix[0]); |
| 333c948a |
309 | if (yRot180) { |
| bf210566 |
310 | al = TMath::ATan2(rotMatrix[1],-rotMatrix[0]); |
| 333c948a |
311 | } |
| 9c656462 |
312 | Double_t xShift = gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al); |
| 313 | Double_t zShift = -gtrans[2]; |
| 108bd0fe |
314 | |
| 315 | TGeoHMatrix *matLtoT = new TGeoHMatrix; |
| 9c656462 |
316 | matLtoT->SetDx( xShift ); // translation |
| 108bd0fe |
317 | matLtoT->SetDy( yShift ); |
| 9c656462 |
318 | matLtoT->SetDz( zShift ); |
| 108bd0fe |
319 | rotMatrix[0]= 0; rotMatrix[1]= 1; rotMatrix[2]= 0; // + rotation |
| 320 | rotMatrix[3]= 1; rotMatrix[4]= 0; rotMatrix[5]= 0; |
| 321 | rotMatrix[6]= 0; rotMatrix[7]= 0; rotMatrix[8]=-1; |
| 333c948a |
322 | if (yFlip) rotMatrix[3] = -1; // flipping in y (for SPD1) |
| 0fcbd059 |
323 | if (yFlip) rotMatrix[1] = -1; // flipping in y (for SPD1) |
| 333c948a |
324 | |
| 325 | if (yRot180) { // rotation of pi around the axis perpendicular to the wafer |
| 9c656462 |
326 | if (yFlip) matLtoT->SetDx( -xShift ); // flipping in y (for SPD1) |
| 333c948a |
327 | matLtoT->SetDy( -yShift ); |
| 9c656462 |
328 | matLtoT->SetDz( -zShift ); |
| 329 | rotMatrix[8]=1; |
| 333c948a |
330 | rotMatrix[3] = -1; |
| 8f8273a4 |
331 | if (yFlip) rotMatrix[3] = 1; // flipping in y (for SPD1) |
| 333c948a |
332 | } |
| 108bd0fe |
333 | |
| 334 | TGeoRotation rot; |
| 335 | rot.SetMatrix(rotMatrix); |
| 336 | matLtoT->MultiplyLeft(&rot); |
| 337 | TGeoHMatrix *matTtoL = new TGeoHMatrix(matLtoT->Inverse()); |
| 338 | delete matLtoT; |
| 339 | alignableEntry->SetMatrix(matTtoL); |
| 340 | } |
| bf210566 |
341 | |
| 108bd0fe |
342 | //______________________________________________________________________ |
| 54c9a3d9 |
343 | void AliITSv11Hybrid::AddAlignableVolumes() const{ |
| 108bd0fe |
344 | // Creates entries for alignable volumes associating the symbolic volume |
| 345 | // name with the corresponding volume path. |
| 346 | // |
| 347 | // Records in the alignable entries the transformation matrices converting |
| 348 | // TGeo local coordinates (in the RS of alignable volumes) to the tracking |
| 349 | // system |
| 350 | // For this, this function has to run before the misalignment because we |
| 351 | // are using the ideal positions in the AliITSgeom object. |
| 54c9a3d9 |
352 | // Inputs: |
| 353 | // none. |
| 354 | // Outputs: |
| 355 | // none. |
| 356 | // Return: |
| 357 | // none. |
| 108bd0fe |
358 | |
| 359 | AliInfo("Add ITS alignable volumes"); |
| 360 | |
| 361 | if (!gGeoManager) { |
| 362 | AliFatal("TGeoManager doesn't exist !"); |
| 363 | return; |
| 364 | } |
| 365 | |
| b2e5530c |
366 | AliGeomManager::ELayerID layerId; |
| 367 | Int_t modUID, modnum; |
| 368 | |
| 108bd0fe |
369 | if( !gGeoManager->SetAlignableEntry("ITS","ALIC_1/ITSV_1") ) |
| 54c9a3d9 |
370 | AliFatal(Form("Unable to set alignable entry ! %s :: %s", |
| 371 | "ITS","ALIC_1/ITSV_1")); |
| 108bd0fe |
372 | |
| 108bd0fe |
373 | TString strSPD = "ITS/SPD"; |
| 374 | TString strSDD = "ITS/SDD"; |
| 375 | TString strSSD = "ITS/SSD"; |
| 376 | TString strStave = "/Stave"; |
| 8f8273a4 |
377 | TString strHalfStave = "/HalfStave"; |
| 108bd0fe |
378 | TString strLadder = "/Ladder"; |
| 379 | TString strSector = "/Sector"; |
| 380 | TString strSensor = "/Sensor"; |
| 381 | TString strEntryName1; |
| 382 | TString strEntryName2; |
| 383 | TString strEntryName3; |
| 8f8273a4 |
384 | TString strEntryName4; |
| 108bd0fe |
385 | |
| 8f8273a4 |
386 | //===== SPD layers ===== |
| b2e5530c |
387 | |
| 8f8273a4 |
388 | if (AliITSInitGeometry::SPDIsTGeoNative()) { // new SPD geometry |
| 389 | |
| 54c9a3d9 |
390 | TString str0 = "ALIC_1/ITSV_1/ITSSPD_1/ITSSPDCarbonFiberSectorV_"; |
| 391 | TString str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay1-Stave_"; |
| 392 | TString str1Bis = "/ITSSPDhalf-Stave"; |
| 8f8273a4 |
393 | TString str1Tierce = "_1"; |
| 54c9a3d9 |
394 | TString str2 = "/ITSSPDlay1-Ladder_"; |
| 108bd0fe |
395 | |
| 396 | TString sector; |
| 397 | TString stave; |
| 8f8273a4 |
398 | TString halfStave; |
| 108bd0fe |
399 | TString module; |
| 400 | |
| b2e5530c |
401 | layerId = AliGeomManager::kSPD1; |
| 402 | modnum = 0; |
| 403 | |
| 8f8273a4 |
404 | for(Int_t cSect = 0; cSect<10; cSect++) { |
| 108bd0fe |
405 | |
| 406 | sector = str0; |
| 8f8273a4 |
407 | sector += cSect+1; // this is one full sector |
| 108bd0fe |
408 | strEntryName1 = strSPD; |
| 409 | strEntryName1 += 0; |
| 410 | strEntryName1 += strSector; |
| 8f8273a4 |
411 | strEntryName1 += cSect; |
| 108bd0fe |
412 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data())) |
| 54c9a3d9 |
413 | AliFatal(Form("New lay 1: Unable to set alignable entry 1! %s::%s", |
| 414 | strEntryName1.Data(),sector.Data())); |
| 415 | |
| 8f8273a4 |
416 | for(Int_t cStave=0; cStave<2; cStave++) { |
| 108bd0fe |
417 | |
| 418 | stave = sector; |
| 419 | stave += str1; |
| 54c9a3d9 |
420 | stave += cStave+1; |
| 108bd0fe |
421 | strEntryName2 = strEntryName1; |
| 422 | strEntryName2 += strStave; |
| 8f8273a4 |
423 | strEntryName2 += cStave; |
| 424 | |
| 425 | for(Int_t cHS=0; cHS<2; cHS++) { |
| 426 | |
| 427 | halfStave = stave; |
| 428 | halfStave += str1Bis; |
| 429 | halfStave += cHS; |
| 430 | halfStave += str1Tierce; |
| 431 | strEntryName3 = strEntryName2; |
| 432 | strEntryName3 += strHalfStave; |
| 433 | strEntryName3 += cHS; |
| 108bd0fe |
434 | |
| 54c9a3d9 |
435 | if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(), |
| 436 | halfStave.Data())) |
| 437 | AliFatal(Form("New lay 1: Unable to set alignable entry 3! %s::%s", |
| 438 | strEntryName3.Data(),halfStave.Data())); |
| 8f8273a4 |
439 | |
| 440 | for(Int_t cLad=0; cLad<2; cLad++) { |
| 108bd0fe |
441 | |
| b2e5530c |
442 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 8f8273a4 |
443 | module = halfStave; |
| 444 | module += str2; |
| 54c9a3d9 |
445 | module += cLad+cHS*2+1; |
| 8f8273a4 |
446 | strEntryName4 = strEntryName3; |
| 447 | strEntryName4 += strLadder; |
| 448 | strEntryName4 += cLad+cHS*2; |
| b2e5530c |
449 | if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID)) |
| 54c9a3d9 |
450 | AliFatal(Form("New lay 1: Unable to set alignable entry 4! %s::%s", |
| 451 | strEntryName4.Data(),module.Data())); |
| 452 | |
| b2e5530c |
453 | SetT2Lmatrix(modUID, 0.0081, kTRUE, kTRUE); |
| 54c9a3d9 |
454 | // 0.0081 is the shift between the centers of alignable |
| 455 | // and sensitive volumes. It is directly extracted from |
| 456 | // the new SPD geometry |
| 457 | } // end for cLad |
| 458 | } // end for cHS |
| 459 | } // end for cStave |
| 460 | } // end for cSect |
| 461 | |
| b2e5530c |
462 | layerId = AliGeomManager::kSPD2; |
| 463 | modnum = 0; |
| 54c9a3d9 |
464 | str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/ITSSPDlay2-Stave_"; |
| 465 | str2 = "/ITSSPDlay2-Ladder_"; |
| 8f8273a4 |
466 | |
| 467 | for(Int_t cSect = 0; cSect<10; cSect++) { |
| 468 | |
| 469 | sector = str0; |
| 470 | sector += cSect+1; // this is one full sector |
| 471 | strEntryName1 = strSPD; |
| 472 | strEntryName1 += 1; |
| 473 | strEntryName1 += strSector; |
| 474 | strEntryName1 += cSect; |
| 475 | |
| 476 | for(Int_t cStave=0; cStave<4; cStave++) { |
| 477 | |
| 478 | stave = sector; |
| 479 | stave += str1; |
| 54c9a3d9 |
480 | stave += cStave+1; |
| 8f8273a4 |
481 | strEntryName2 = strEntryName1; |
| 482 | strEntryName2 += strStave; |
| 483 | strEntryName2 += cStave; |
| 484 | |
| 485 | for(Int_t cHS=0; cHS<2; cHS++) { |
| 486 | |
| 487 | halfStave = stave; |
| 488 | halfStave += str1Bis; |
| 489 | halfStave += cHS; |
| 490 | halfStave += str1Tierce; |
| 108bd0fe |
491 | strEntryName3 = strEntryName2; |
| 8f8273a4 |
492 | strEntryName3 += strHalfStave; |
| 493 | strEntryName3 += cHS; |
| 494 | |
| 54c9a3d9 |
495 | if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(), |
| 496 | halfStave.Data())) |
| 497 | AliFatal(Form("New lay 2: Unable to set alignable entry 3! %s::%s", |
| 498 | strEntryName3.Data(),halfStave.Data())); |
| 108bd0fe |
499 | |
| 8f8273a4 |
500 | for(Int_t cLad=0; cLad<2; cLad++) { |
| 54c9a3d9 |
501 | |
| b2e5530c |
502 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 8f8273a4 |
503 | module = halfStave; |
| 504 | module += str2; |
| 54c9a3d9 |
505 | module += cLad+cHS*2 +1; |
| 8f8273a4 |
506 | strEntryName4 = strEntryName3; |
| 507 | strEntryName4 += strLadder; |
| 508 | strEntryName4 += cLad+cHS*2; |
| b2e5530c |
509 | if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID)) |
| 54c9a3d9 |
510 | AliFatal(Form("New lay 2: Unable to set alignable entry 4! %s::%s", |
| 511 | strEntryName4.Data(),module.Data())); |
| 8f8273a4 |
512 | |
| b2e5530c |
513 | SetT2Lmatrix(modUID, -0.0081, kFALSE); |
| 54c9a3d9 |
514 | } // end for cLad |
| 515 | } // end for cHS |
| 516 | } // end for cStave |
| 517 | } // cSect |
| 108bd0fe |
518 | |
| 8f8273a4 |
519 | } else { // else old SPD geometry |
| 520 | |
| 108bd0fe |
521 | TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_"; |
| 8f8273a4 |
522 | TString str1 = "/I10B_"; |
| 523 | TString str1Bis = "/L1H-STAVE"; |
| 524 | TString str1Tierce = "_1"; |
| 525 | TString str2 = "/I107_"; |
| 108bd0fe |
526 | |
| 527 | TString sector; |
| 528 | TString stave; |
| 8f8273a4 |
529 | TString halfStave; |
| 108bd0fe |
530 | TString module; |
| 531 | |
| b2e5530c |
532 | layerId = AliGeomManager::kSPD1; |
| 533 | modnum = 0; |
| 534 | |
| 8f8273a4 |
535 | for(Int_t cSect = 0; cSect<10; cSect++) { |
| 108bd0fe |
536 | |
| 537 | sector = str0; |
| 8f8273a4 |
538 | sector += cSect+1; // this is one full sector |
| 108bd0fe |
539 | strEntryName1 = strSPD; |
| 8f8273a4 |
540 | strEntryName1 += 0; |
| 108bd0fe |
541 | strEntryName1 += strSector; |
| 8f8273a4 |
542 | strEntryName1 += cSect; |
| 108bd0fe |
543 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data())) |
| 54c9a3d9 |
544 | AliFatal(Form("Old lay1: Unable to set alignable entry 1! %s::%s", |
| 545 | strEntryName1.Data(),sector.Data())); |
| 546 | |
| 8f8273a4 |
547 | for(Int_t cStave = 0; cStave<2; cStave++) { |
| 54c9a3d9 |
548 | |
| 108bd0fe |
549 | stave = sector; |
| 550 | stave += str1; |
| 8f8273a4 |
551 | stave += cStave+1; |
| 108bd0fe |
552 | strEntryName2 = strEntryName1; |
| 553 | strEntryName2 += strStave; |
| 8f8273a4 |
554 | strEntryName2 += cStave; |
| 54c9a3d9 |
555 | // this is a stave |
| 556 | //printf("%s == %s\n",strEntryName2.Data(),stave.Data()); |
| 108bd0fe |
557 | |
| 8f8273a4 |
558 | for(Int_t cHS=0; cHS<2; cHS++) { |
| 559 | |
| 560 | halfStave = stave; |
| 561 | halfStave += str1Bis; |
| 562 | halfStave += cHS; |
| 563 | halfStave += str1Tierce; |
| 108bd0fe |
564 | strEntryName3 = strEntryName2; |
| 8f8273a4 |
565 | strEntryName3 += strHalfStave; |
| 566 | strEntryName3 += cHS; |
| 54c9a3d9 |
567 | // this is a half-stave |
| 568 | //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data()); |
| 569 | if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(), |
| 570 | halfStave.Data())) |
| 571 | AliFatal(Form("Old lay 1: Unable to set alignable entry 3! %s::%s", |
| 572 | strEntryName3.Data(),halfStave.Data())); |
| 108bd0fe |
573 | |
| 8f8273a4 |
574 | for(Int_t cLadder = 0; cLadder<2; cLadder++) { |
| 575 | |
| b2e5530c |
576 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 8f8273a4 |
577 | module = halfStave; |
| 578 | module += str2; |
| 579 | module += cLadder+cHS*2+1; |
| 580 | strEntryName4 = strEntryName3; |
| 581 | strEntryName4 += strLadder; |
| 582 | strEntryName4 += cLadder+cHS*2; |
| 583 | //printf("%s == %s\n",strEntryName4.Data(),module.Data()); |
| b2e5530c |
584 | if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID)) |
| 54c9a3d9 |
585 | AliFatal(Form("Old lay 1: Unable to set alignable entry 4! %s::%s", |
| b2e5530c |
586 | strEntryName4.Data(),module.Data())); |
| 8f8273a4 |
587 | |
| b2e5530c |
588 | SetT2Lmatrix(modUID, -fChip1*0.0001/2., kTRUE); |
| 54c9a3d9 |
589 | } // end for cLadder |
| 590 | } // end for cHS |
| 591 | } // end for cStave |
| 592 | } // end for cSect |
| 8f8273a4 |
593 | |
| b2e5530c |
594 | layerId = AliGeomManager::kSPD2; |
| 595 | modnum = 0; |
| 596 | |
| 8f8273a4 |
597 | str1Bis = "/L2H-STAVE"; |
| 598 | str1 = "/I20B_"; |
| 599 | str2 = "/I1D7_"; |
| 600 | |
| 601 | for(Int_t cSect = 0; cSect<10; cSect++) { |
| 602 | |
| 603 | sector = str0; |
| 604 | sector += cSect+1; // this is one full sector |
| 605 | strEntryName1 = strSPD; |
| 606 | strEntryName1 += 1; |
| 607 | strEntryName1 += strSector; |
| 608 | strEntryName1 += cSect; |
| 54c9a3d9 |
609 | //if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data())) |
| 610 | // AliFatal(Form("Unable to set alignable entry!!"); |
| 611 | // we don't need the previous lines because the whole sector is |
| 612 | // already define with first layer ... |
| 613 | |
| 8f8273a4 |
614 | for(Int_t cStave =0; cStave<4; cStave++) { |
| 615 | |
| 616 | stave = sector; |
| 617 | stave += str1; |
| 618 | stave += cStave+1; |
| 619 | strEntryName2 = strEntryName1; |
| 620 | strEntryName2 += strStave; |
| 621 | strEntryName2 += cStave; |
| 622 | |
| 623 | for(Int_t cHS=0; cHS<2; cHS++) { |
| 624 | |
| 625 | halfStave = stave; |
| 626 | halfStave += str1Bis; |
| 627 | halfStave += cHS; |
| 628 | halfStave += str1Tierce; |
| 629 | strEntryName3 = strEntryName2; |
| 630 | strEntryName3 += strHalfStave; |
| 631 | strEntryName3 += cHS; |
| 54c9a3d9 |
632 | // this is a half-stave |
| 633 | //printf("%s == %s\n",strEntryName3.Data(),halfStave.Data()); |
| 634 | if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(), |
| 635 | halfStave.Data())) |
| 636 | AliFatal(Form("Old lay 2: Unable to set alignable entry 3! %s::%s", |
| 637 | strEntryName3.Data(),halfStave.Data())); |
| 8f8273a4 |
638 | |
| 639 | for(Int_t cLad =0; cLad<2; cLad++) { |
| 54c9a3d9 |
640 | |
| b2e5530c |
641 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 8f8273a4 |
642 | module = halfStave; |
| 643 | module += str2; |
| 644 | module += cLad+cHS*2+1; |
| 645 | strEntryName4 = strEntryName3; |
| 646 | strEntryName4 += strLadder; |
| 647 | strEntryName4 += cLad+cHS*2; |
| 648 | //printf("%s == %s\n",strEntryName4.Data(),module.Data()); |
| b2e5530c |
649 | if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data(),modUID)) |
| 54c9a3d9 |
650 | AliFatal(Form("Old lay2: Unable to set alignable entry 4! %s::%s", |
| 651 | strEntryName4.Data(),module.Data())); |
| 8f8273a4 |
652 | |
| b2e5530c |
653 | SetT2Lmatrix(modUID, -fChip2*0.0001/2., kFALSE); |
| 54c9a3d9 |
654 | } // end for cLad |
| 655 | } // end for cHS |
| 656 | } // end for cStave |
| 657 | } // end for cSect |
| 658 | } // end if AliITSInitGeometry::SPSIsTGeoNative(). |
| 108bd0fe |
659 | |
| 660 | //===== SDD layers ===== |
| 108bd0fe |
661 | if (AliITSInitGeometry::SDDIsTGeoNative()) { // new SDD geometry |
| 662 | |
| b2e5530c |
663 | layerId = AliGeomManager::kSDD1; |
| 664 | modnum = 0; |
| 108bd0fe |
665 | TString str0 = "/ALIC_1/ITSV_1/ITSsddLayer3_1/ITSsddLadd_"; // SDD layer1 |
| 666 | TString str1 = "/ITSsddSensor3_"; |
| 108bd0fe |
667 | TString ladder; |
| 3e49380a |
668 | TString sensor; |
| 108bd0fe |
669 | |
| 670 | for(Int_t c1 = 0; c1<14; c1++) { |
| 671 | |
| 672 | ladder = str0; |
| 673 | ladder += c1; // the set of wafers from one ladder |
| 674 | strEntryName1 = strSDD; |
| 675 | strEntryName1 += 2; |
| 676 | strEntryName1 +=strLadder; |
| 677 | strEntryName1 += c1; |
| 678 | //printf("%s == %s\n",strEntryName1.Data(),ladder.Data()); |
| 679 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data())) |
| 54c9a3d9 |
680 | AliFatal(Form("Unable to set alignable entry 1! %s :: %s", |
| 681 | strEntryName1.Data(),ladder.Data())); |
| 108bd0fe |
682 | |
| 683 | for(Int_t c2 =0; c2<6; c2++) { |
| 684 | |
| b2e5530c |
685 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 3e49380a |
686 | sensor = ladder; |
| 687 | sensor += str1; |
| 688 | sensor += c2; |
| 108bd0fe |
689 | strEntryName2 = strEntryName1; |
| 690 | strEntryName2 += strSensor; |
| 691 | strEntryName2 += c2; |
| 692 | //printf("%s == %s\n",strEntryName2.Data(),wafer.Data()); |
| 3e49380a |
693 | if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID)) |
| 54c9a3d9 |
694 | AliFatal(Form("Unable to set alignable entry 2! %s :: %s", |
| 3e49380a |
695 | strEntryName2.Data(),sensor.Data())); |
| 108bd0fe |
696 | |
| b2e5530c |
697 | SetT2Lmatrix(modUID, 0, kFALSE, c2>=3); |
| 108bd0fe |
698 | } |
| 699 | } |
| 700 | |
| b2e5530c |
701 | layerId = AliGeomManager::kSDD2; |
| 702 | modnum = 0; |
| 108bd0fe |
703 | str0 = "/ALIC_1/ITSV_1/ITSsddLayer4_1/ITSsddLadd_"; // SDD layer2 |
| 704 | str1 = "/ITSsddSensor4_"; |
| 108bd0fe |
705 | |
| 706 | for(Int_t c1 = 0; c1<22; c1++) { |
| 707 | |
| 708 | ladder = str0; |
| 709 | ladder += c1; // the set of wafers from one ladder |
| 710 | strEntryName1 = strSDD; |
| 711 | strEntryName1 += 3; |
| 712 | strEntryName1 += strLadder; |
| 713 | strEntryName1 += c1; |
| 714 | //printf("%s == %s\n",strEntryName1.Data(),ladder.Data()); |
| 715 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data())) |
| 54c9a3d9 |
716 | AliFatal(Form("Unable to set alignable entry 1! %s :: %s", |
| 717 | strEntryName1.Data(),ladder.Data())); |
| 108bd0fe |
718 | |
| 719 | for(Int_t c2 =0; c2<8; c2++) { |
| 720 | |
| b2e5530c |
721 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 3e49380a |
722 | sensor = ladder; |
| 723 | sensor += str1; |
| 724 | sensor += c2; |
| 108bd0fe |
725 | strEntryName2 = strEntryName1; |
| 726 | strEntryName2 += strSensor; |
| 727 | strEntryName2 += c2; |
| 728 | //printf("%s == %s\n",strEntryName2.Data(),wafer.Data()); |
| 3e49380a |
729 | if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),sensor.Data(),modUID)) |
| 54c9a3d9 |
730 | AliFatal(Form("Unable to set alignable entry 2! %s :: %s", |
| 3e49380a |
731 | strEntryName2.Data(),sensor.Data())); |
| 108bd0fe |
732 | |
| b2e5530c |
733 | SetT2Lmatrix(modUID, 0, kFALSE, c2>=4); |
| 108bd0fe |
734 | } |
| 735 | } |
| 736 | |
| bf210566 |
737 | } else { // else old SDD geometry |
| 108bd0fe |
738 | |
| b2e5530c |
739 | layerId = AliGeomManager::kSDD1; |
| 740 | modnum = 0; |
| 741 | |
| 108bd0fe |
742 | TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_"; |
| 743 | TString str1 = "/I302_"; |
| 744 | |
| 745 | TString ladder; |
| 746 | TString wafer; |
| 747 | |
| 748 | for(Int_t c1 = 1; c1<=14; c1++){ |
| 749 | |
| 750 | ladder = str0; |
| 751 | ladder += c1; // the set of wafers from one ladder |
| 752 | strEntryName1 = strSDD; |
| 753 | strEntryName1 += 2; |
| 754 | strEntryName1 +=strLadder; |
| 755 | strEntryName1 += (c1-1); |
| 756 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data())) |
| 54c9a3d9 |
757 | AliFatal(Form("Unable to set alignable entry 1! %s :: %s", |
| 758 | strEntryName1.Data(),ladder.Data())); |
| 108bd0fe |
759 | |
| 760 | for(Int_t c2 =1; c2<=6; c2++){ |
| 761 | |
| b2e5530c |
762 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 108bd0fe |
763 | wafer = ladder; |
| 764 | wafer += str1; |
| 765 | wafer += c2; // one wafer |
| 766 | strEntryName2 = strEntryName1; |
| 767 | strEntryName2 += strSensor; |
| 768 | strEntryName2 += (c2-1); |
| b2e5530c |
769 | if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID)) |
| 54c9a3d9 |
770 | AliFatal(Form("Unable to set alignable entry 2! %s :: %s", |
| 771 | strEntryName2.Data(),wafer.Data())); |
| 108bd0fe |
772 | |
| b2e5530c |
773 | SetT2Lmatrix(modUID, 0, kFALSE); |
| 108bd0fe |
774 | } |
| 775 | } |
| 776 | |
| b2e5530c |
777 | layerId = AliGeomManager::kSDD2; |
| 778 | modnum = 0; |
| 108bd0fe |
779 | str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_"; |
| 780 | str1 = "/I402_"; |
| 781 | |
| 782 | for(Int_t c1 = 1; c1<=22; c1++){ |
| 783 | |
| 784 | ladder = str0; |
| 785 | ladder += c1; // the set of wafers from one ladder |
| 786 | strEntryName1 = strSDD; |
| 787 | strEntryName1 += 3; |
| 788 | strEntryName1 +=strLadder; |
| 789 | strEntryName1 += (c1-1); |
| 790 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data())) |
| 54c9a3d9 |
791 | AliFatal(Form("Unable to set alignable entry 1! %s :: %s", |
| 792 | strEntryName1.Data(),ladder.Data())); |
| 108bd0fe |
793 | |
| 794 | for(Int_t c2 =1; c2<=8; c2++){ |
| 795 | |
| b2e5530c |
796 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 108bd0fe |
797 | wafer = ladder; |
| 798 | wafer += str1; |
| 799 | wafer += c2; // one wafer |
| 800 | strEntryName2 = strEntryName1; |
| 801 | strEntryName2 += strSensor; |
| 802 | strEntryName2 += (c2-1); |
| b2e5530c |
803 | if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID)) |
| 54c9a3d9 |
804 | AliFatal(Form("Unable to set alignable entry 2! %s,%s", |
| 805 | strEntryName2.Data(),wafer.Data())); |
| 108bd0fe |
806 | |
| b2e5530c |
807 | SetT2Lmatrix(modUID, 0, kFALSE); |
| 108bd0fe |
808 | } |
| 809 | } |
| 108bd0fe |
810 | } // end SDD |
| 811 | |
| 8f8273a4 |
812 | //===== SSD layers ===== |
| bf210566 |
813 | if (AliITSInitGeometry::SSDIsTGeoNative()) { // new SSD geometry |
| 814 | |
| b2e5530c |
815 | layerId = AliGeomManager::kSSD1; |
| 816 | modnum = 0; |
| 54c9a3d9 |
817 | TString str0 = "/ALIC_1/ITSV_1/ITSssdLayer5_1/ITSssdLay5Ladd_";//SSD layer1 |
| ef9451a3 |
818 | TString str1 = "/ITSssdSensor5_"; |
| bf210566 |
819 | TString str2 = ""; |
| 820 | TString ladder; |
| 821 | TString wafer; |
| 822 | |
| 823 | for(Int_t c1 = 0; c1<34; c1++) { |
| 824 | |
| 825 | ladder = str0; |
| 826 | ladder += c1; // the set of wafers from one ladder |
| 827 | strEntryName1 = strSSD; |
| 828 | strEntryName1 += 4; |
| 829 | strEntryName1 += strLadder; |
| 830 | strEntryName1 += c1; |
| 831 | //printf("%s == %s\n",strEntryName1.Data(),ladder.Data()); |
| 832 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data())) |
| 54c9a3d9 |
833 | AliFatal(Form("Unable to set alignable entry 1! %s :: %s", |
| 834 | strEntryName1.Data(),ladder.Data())); |
| bf210566 |
835 | |
| 836 | for(Int_t c2 =0; c2<22; c2++) { |
| 837 | |
| b2e5530c |
838 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| bf210566 |
839 | wafer = ladder; |
| 840 | wafer += str1; |
| 841 | wafer += c2; |
| 842 | //wafer += str2; // one wafer |
| 843 | strEntryName2 = strEntryName1; |
| 844 | strEntryName2 += strSensor; |
| 845 | strEntryName2 += c2; |
| 846 | //printf("%s == %s\n",strEntryName2.Data(),wafer.Data()); |
| b2e5530c |
847 | if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID)) |
| 54c9a3d9 |
848 | AliFatal(Form("Unable to set alignable entry 2! %s :: %s", |
| 849 | strEntryName2.Data(),wafer.Data())); |
| bf210566 |
850 | |
| b2e5530c |
851 | SetT2Lmatrix(modUID, 0, kFALSE, kFALSE); |
| bf210566 |
852 | } |
| 853 | } |
| 854 | |
| b2e5530c |
855 | layerId = AliGeomManager::kSSD2; |
| 856 | modnum = 0; |
| bf210566 |
857 | str0 = "/ALIC_1/ITSV_1/ITSssdLayer6_1/ITSssdLay6Ladd_"; // SSD layer2 |
| ef9451a3 |
858 | str1 = "/ITSssdSensor6_"; |
| bf210566 |
859 | str2 = ""; |
| 860 | |
| 861 | for(Int_t c1 = 0; c1<38; c1++) { |
| 862 | |
| 863 | ladder = str0; |
| 864 | ladder += c1; // the set of wafers from one ladder |
| 865 | strEntryName1 = strSSD; |
| 866 | strEntryName1 += 5; |
| 867 | strEntryName1 += strLadder; |
| 868 | strEntryName1 += c1; |
| 869 | //printf("%s == %s\n",strEntryName1.Data(),ladder.Data()); |
| 870 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data())) |
| 54c9a3d9 |
871 | AliFatal(Form("Unable to set alignable entry 1! %s :: %s", |
| 872 | strEntryName1.Data(),ladder.Data())); |
| bf210566 |
873 | |
| 874 | for(Int_t c2 =0; c2<25; c2++) { |
| 875 | |
| b2e5530c |
876 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| bf210566 |
877 | wafer = ladder; |
| 878 | wafer += str1; |
| 879 | wafer += c2; |
| 880 | //wafer += str2; // one wafer |
| 881 | strEntryName2 = strEntryName1; |
| 882 | strEntryName2 += strSensor; |
| 883 | strEntryName2 += c2; |
| 884 | //printf("%s == %s\n",strEntryName2.Data(),wafer.Data()); |
| b2e5530c |
885 | if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID)) |
| 54c9a3d9 |
886 | AliFatal(Form("Unable to set alignable entry 2! %s :: %s", |
| 887 | strEntryName2.Data(),wafer.Data())); |
| bf210566 |
888 | |
| b2e5530c |
889 | SetT2Lmatrix(modUID, 0, kFALSE, kFALSE); |
| bf210566 |
890 | } |
| 891 | } |
| 892 | |
| 893 | } else { // else old SSD geometry |
| b2e5530c |
894 | |
| 895 | layerId = AliGeomManager::kSSD1; |
| 896 | modnum = 0; |
| 108bd0fe |
897 | TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_"; |
| 898 | TString str1 = "/I562_"; |
| 108bd0fe |
899 | TString ladder; |
| 900 | TString wafer; |
| 901 | |
| 902 | for(Int_t c1 = 1; c1<=34; c1++){ |
| bf210566 |
903 | |
| 108bd0fe |
904 | ladder = str0; |
| 905 | ladder += c1; // the set of wafers from one ladder |
| 906 | strEntryName1 = strSSD; |
| 907 | strEntryName1 += 4; |
| 908 | strEntryName1 +=strLadder; |
| 909 | strEntryName1 += (c1-1); |
| 910 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data())) |
| 54c9a3d9 |
911 | AliFatal(Form("Unable to set alignable entry 1! %s :: %s", |
| 912 | strEntryName1.Data(),ladder.Data())); |
| 913 | |
| 108bd0fe |
914 | for(Int_t c2 = 1; c2<=22; c2++){ |
| bf210566 |
915 | |
| b2e5530c |
916 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 108bd0fe |
917 | wafer = ladder; |
| 918 | wafer += str1; |
| 919 | wafer += c2; // one wafer |
| 920 | strEntryName2 = strEntryName1; |
| 921 | strEntryName2 += strSensor; |
| 922 | strEntryName2 += (c2-1); |
| b2e5530c |
923 | if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID)) |
| 54c9a3d9 |
924 | AliFatal(Form("Unable to set alignable entry 2! %s :: %s", |
| 925 | strEntryName2.Data(),wafer.Data())); |
| 926 | |
| b2e5530c |
927 | SetT2Lmatrix(modUID, 0, kFALSE); |
| 108bd0fe |
928 | } |
| 929 | } |
| bf210566 |
930 | |
| b2e5530c |
931 | layerId = AliGeomManager::kSSD2; |
| 932 | modnum = 0; |
| bf210566 |
933 | str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_"; |
| 934 | str1 = "/I566_"; |
| 935 | |
| 108bd0fe |
936 | for(Int_t c1 = 1; c1<=38; c1++){ |
| bf210566 |
937 | |
| 108bd0fe |
938 | ladder = str0; |
| 939 | ladder += c1; // the set of wafers from one ladder |
| 940 | strEntryName1 = strSSD; |
| 941 | strEntryName1 += 5; |
| 942 | strEntryName1 +=strLadder; |
| 943 | strEntryName1 += (c1-1); |
| 944 | if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data())) |
| 54c9a3d9 |
945 | AliFatal(Form("Unable to set alignable entry 1! %s :: %s", |
| 946 | strEntryName1.Data(),ladder.Data())); |
| 947 | |
| 108bd0fe |
948 | for(Int_t c2 = 1; c2<=25; c2++){ |
| bf210566 |
949 | |
| b2e5530c |
950 | modUID = AliGeomManager::LayerToVolUID(layerId,modnum++); |
| 108bd0fe |
951 | wafer = ladder; |
| 952 | wafer += str1; |
| 953 | wafer += c2; // one wafer |
| 954 | strEntryName2 = strEntryName1; |
| 955 | strEntryName2 += strSensor; |
| 956 | strEntryName2 += (c2-1); |
| b2e5530c |
957 | if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data(),modUID)) |
| 54c9a3d9 |
958 | AliFatal(Form("Unable to set alignable entry 2! %s :: %s", |
| 959 | strEntryName2.Data(),wafer.Data())); |
| 960 | |
| b2e5530c |
961 | SetT2Lmatrix(modUID, 0, kFALSE); |
| 108bd0fe |
962 | } |
| 963 | } |
| bf210566 |
964 | } // end SSD geometry |
| 108bd0fe |
965 | } |
| bf210566 |
966 | |
| 108bd0fe |
967 | //______________________________________________________________________ |
| 968 | void AliITSv11Hybrid::CreateGeometry() { |
| 969 | |
| 333c948a |
970 | // Create the geometry and insert it in ALIC |
| 971 | // It calls first the CreateOldGeometry() routine which add the |
| 972 | // pieces coming from the old v10 geometry. Then the pieces from |
| 973 | // the new geometry are inserting in the mother volume ITSV. |
| 974 | |
| 108bd0fe |
975 | TGeoManager *geoManager = gGeoManager; |
| 976 | |
| 977 | CreateOldGeometry(); |
| 108bd0fe |
978 | |
| 1c5895a3 |
979 | TGeoVolume *vITSV = geoManager->GetVolume("ITSV"); |
| 980 | TGeoVolume *vITSS = geoManager->GetVolume("ITSS"); |
| bf210566 |
981 | |
| 982 | |
| 012f0f4c |
983 | const Char_t *cvsDate="$Date$"; |
| 984 | const Char_t *cvsRevision="$Revision$"; |
| 7ab0715c |
985 | const Int_t kLength=100; |
| 986 | Char_t vstrng[kLength]; |
| 987 | if(fInitGeom.WriteVersionString(vstrng,kLength,(AliITSVersion_t)IsVersion(), |
| 1c5895a3 |
988 | fMinorVersion,cvsDate,cvsRevision)) { |
| 989 | vITSV->SetTitle(vstrng); |
| 990 | vITSS->SetTitle(vstrng); |
| 991 | } |
| 012f0f4c |
992 | |
| 8f8273a4 |
993 | if (AliITSInitGeometry::SPDIsTGeoNative()) { |
| 1c5895a3 |
994 | fSPDgeom->SPDSector(vITSV); |
| 8f8273a4 |
995 | } |
| 996 | |
| 108bd0fe |
997 | if (AliITSInitGeometry::SDDIsTGeoNative()) { |
| 1c5895a3 |
998 | fSDDgeom->Layer3(vITSV); |
| 999 | fSDDgeom->Layer4(vITSV); |
| 1000 | fSDDgeom->ForwardLayer3(vITSV); |
| 1001 | fSDDgeom->ForwardLayer4(vITSV); |
| bf210566 |
1002 | } |
| cc8a4c78 |
1003 | |
| bf210566 |
1004 | if (AliITSInitGeometry::SSDIsTGeoNative()) { |
| 1c5895a3 |
1005 | fSSDgeom->Layer5(vITSV); |
| 1006 | fSSDgeom->Layer6(vITSV); |
| 1007 | fSSDgeom->LadderSupportLayer5(vITSV); |
| 1008 | fSSDgeom->LadderSupportLayer6(vITSV); |
| 1009 | fSSDgeom->EndCapSupportSystemLayer6(vITSV); |
| 1010 | fSSDgeom->EndCapSupportSystemLayer5(vITSV); |
| 108bd0fe |
1011 | } |
| b0c0f648 |
1012 | |
| 1013 | if (AliITSInitGeometry::SPDshieldIsTGeoNative()) |
| 1c5895a3 |
1014 | fSupgeom->SPDCone(vITSV); |
| 7d6c23de |
1015 | |
| 1016 | if (AliITSInitGeometry::SDDconeIsTGeoNative()) |
| 1c5895a3 |
1017 | fSupgeom->SDDCone(vITSV); |
| 3a299c65 |
1018 | |
| 1019 | if (AliITSInitGeometry::SSDconeIsTGeoNative()) |
| 1c5895a3 |
1020 | fSupgeom->SSDCone(vITSV); |
| cc8a4c78 |
1021 | |
| 1022 | if (AliITSInitGeometry::ServicesAreTGeoNative()) { |
| 1c5895a3 |
1023 | fSDDgeom->SDDCables(vITSV); |
| 1024 | fSSDgeom->SSDCables(vITSV); |
| 1025 | fSupgeom->ServicesCableSupport(vITSS); |
| cc8a4c78 |
1026 | } |
| f0a991bf |
1027 | |
| 1028 | if (AliITSInitGeometry::SupportIsTGeoNative()) { |
| 1029 | fSupgeom->ITSTPCSupports(vITSS); |
| 1030 | } |
| 108bd0fe |
1031 | } |
| 1032 | |
| 1033 | //______________________________________________________________________ |
| 1034 | void AliITSv11Hybrid::CreateOldGeometry(){ |
| 333c948a |
1035 | // This routine defines and creates some pieces of the geometry |
| 1036 | // of version 10 (AliITSvPPRasymmFMD) |
| 108bd0fe |
1037 | |
| 1038 | //Begin_Html |
| 1039 | /* |
| 1040 | <img src="picts/ITS/ITS_full_vPPRasymm.jpg"> |
| 1041 | </pre> |
| 1042 | <br clear=left> |
| 1043 | <font size=+2 color=red> |
| 1044 | <p>This shows the full ITS geometry. |
| 1045 | </font> |
| 1046 | <img src="picts/ITS/ITS_SPD_Barrel_vPPRasymm.jpg"> |
| 1047 | </pre> |
| 1048 | < br clear=left> |
| 1049 | <font size=+2 color=red> |
| 1050 | <p>This shows the full SPD Barrel of the ITS geometry. |
| 1051 | </font> |
| 1052 | <img src="picts/ITS/ITS_SDD_Barrel_vPPRasymm.jpg"> |
| 1053 | </pre> |
| 1054 | <br clear=left> |
| 1055 | <font size=+2 color=red> |
| 1056 | <p>This shows the full SDD Barrel of the ITS geometry. |
| 1057 | </font> |
| 1058 | <img src="picts/ITS/ITS_SSD_Barrel_vPPRasymm.jpg"> |
| 1059 | </pre> |
| 1060 | <br clear=left> |
| 1061 | <font size=+2 color=red> |
| 1062 | <p>This shows the full SSD Barrel of the ITS geometry. |
| 1063 | </font> |
| 1064 | */ |
| 1065 | //End_Html |
| 1066 | //INNER RADII OF THE SILICON LAYERS |
| 1067 | // Float_t rl[6] = { 3.8095,7.,15.,24.,38.1,43.5765 }; |
| 7ab0715c |
1068 | //THICKNESSES OF LAYERS (in % radiation kLength) |
| 108bd0fe |
1069 | Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 }; |
| 1070 | //HALF LENGTHS OF LAYERS |
| 1071 | // Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 }; |
| 1072 | //LENGTHS OF END-LADDER BOXES (ALL INCLUDED) |
| 1073 | // Float_t dzb[6] = { 12.4,12.4,13.5,15.,7.5,7.5 }; |
| 1074 | //THICKNESSES OF END-LADDER BOXES (ALL INCLUDED) |
| 1075 | // Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,4.,4. }; |
| 1076 | |
| 1077 | |
| 1078 | Float_t dits[100], rlim, zmax; |
| 1079 | // Float_t zpos; |
| 1080 | // Float_t pcits[50] |
| 1081 | Float_t ztpc; |
| 1082 | Int_t idrotm[1999], i; |
| 1083 | Float_t dgh[100]; |
| 1084 | |
| 1085 | // Define some variables for SPD |
| 1086 | |
| 1087 | Float_t dits1[3], di101[3], di107[3], di10b[3], di106[3];// for layer 1 |
| 1088 | //Float_t di103[3], di10a[3], di102[3]; // for layer 1 |
| 1089 | Float_t dits2[3], di1d1[3], di1d7[3], di20b[3], di1d6[3];// for layer 2 |
| 1090 | //Float_t di1d3[3], di20a[3], di1d2[3]; // for layer 2 |
| 1091 | Float_t di108[3]; |
| 1092 | //Float_t di104[3]; // for both layers |
| 1093 | |
| 1094 | Float_t ddet1=200.; // total detector thickness on layer 1 (micron) |
| 1095 | Float_t dchip1=200.; // total chip thickness on layer 1 (micron) |
| 1096 | |
| 1097 | Float_t ddet2=200.; // total detector thickness on layer 2 (micron) |
| 1098 | Float_t dchip2=200.; // total chip thickness on layer 2 (micron) |
| 1099 | |
| 1100 | Float_t dbus=300.; // total bus thickness on both layers (micron) |
| 1101 | |
| 1102 | ddet1 = GetThicknessDet1(); |
| 1103 | ddet2 = GetThicknessDet2(); |
| 1104 | dchip1 = GetThicknessChip1(); |
| 1105 | dchip2 = GetThicknessChip2(); |
| 1106 | |
| 1107 | if(ddet1 < 100. || ddet1 > 300.) { |
| 1108 | AliWarning("The detector thickness for layer 1 is outside "); |
| 1109 | AliWarning("the range of [100,300] microns. The default value of 200 microns "); |
| 1110 | AliWarning("will be used."); |
| 1111 | ddet1=200.; |
| 1112 | } // end if |
| 1113 | |
| 1114 | if(ddet2 < 100. || ddet2 > 300.) { |
| 1115 | AliWarning("The detector thickness for layer 2 is outside "); |
| 1116 | AliWarning("the range of [100,300] microns. The default value of 200 microns "); |
| 1117 | AliWarning("will be used."); |
| 1118 | ddet2=200.; |
| 1119 | }// end if |
| 1120 | |
| 1121 | if(dchip1 < 100. || dchip1 > 300.) { |
| 1122 | AliWarning("The chip thickness for layer 1 is outside"); |
| 1123 | AliWarning("the range of [100,300] microns. The default value of 200 microns"); |
| 1124 | AliWarning("will be used."); |
| 1125 | dchip1=200.; |
| 1126 | }// end if |
| 1127 | |
| 1128 | if(dchip2 < 100. || dchip2 > 300.) { |
| 1129 | AliWarning("The chip thickness for layer 2 is outside"); |
| 1130 | AliWarning("the range of [100,300] microns. The default value of 200 microns"); |
| 1131 | AliWarning("will be used"); |
| 1132 | dchip2=200.; |
| 1133 | }// end if |
| 1134 | |
| 1135 | Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out) |
| 1136 | |
| 1137 | Int_t fluid = 1; // flag for the cooling fluid (1 --> water; 0 --> freon) |
| 1138 | // This option is maintained for SDD and SSD only |
| 1139 | // For SPD the cooling liquid is C4F10 |
| 1140 | rails = GetRails(); |
| 1141 | |
| 1142 | fluid = GetCoolingFluid(); |
| 1143 | |
| 1144 | if(rails != 0 && rails != 1) { |
| 1145 | AliWarning("The switch for rails is not set neither"); |
| 1146 | AliWarning("to 0 (rails out) nor to 1 (rails in). The default value of"); |
| 1147 | AliWarning("1 (rails in) will be used"); |
| 1148 | rails=1; |
| 1149 | }// end if |
| 1150 | |
| 1151 | |
| 1152 | AliDebug(1,Form("Detector thickness on layer 1 is set to %f microns",ddet1)); |
| 1153 | AliDebug(1,Form("Chip thickness on layer 1 is set to %f microns",dchip1)); |
| 1154 | AliDebug(1,Form("Detector thickness on layer 2 is set to %f microns",ddet2)); |
| 1155 | AliDebug(1,Form("Chip thickness on layer 2 is set to %f microns",dchip2)); |
| 1156 | if(rails == 0 ) { |
| 1157 | AliDebug(1,"Rails are out."); |
| 1158 | } else { |
| 1159 | AliDebug(1,"Rails are in."); |
| 1160 | }// end if |
| 1161 | |
| 1162 | ddet1 = ddet1*0.0001/2.; // conversion from tot length in um to half in cm |
| 1163 | ddet2 = ddet2*0.0001/2.; // conversion from tot length in um to half in cm |
| 1164 | dchip1 = dchip1*0.0001/2.;// conversion from tot length in um to half in cm |
| 1165 | dchip2 = dchip2*0.0001/2.;// conversion from tot length in um to half in cm |
| 1166 | dbus = dbus*0.0001/2.; // conversion from tot length in um to half in cm |
| 1167 | |
| 1168 | Float_t deltax, deltay; |
| 1169 | |
| 1170 | //Int_t thickness = fMinorVersion/10; |
| 1171 | //Int_t option = fMinorVersion - 10*thickness; |
| 1172 | |
| 1173 | |
| 1174 | // Define some variables for SDD |
| 1175 | |
| 1176 | Float_t sin30, cos30; |
| 1177 | |
| 1178 | // SDD electronics+services main volumes |
| 1179 | Float_t iI018dits[3], iI024dits[3], iI047dits[3], iI048dits[3]; |
| 1180 | |
| 1181 | // SDD detector ladder |
| 1182 | |
| 1183 | Float_t iI302dits[3], iI402dits[3], iI004dits[3], iI005dits[3]; |
| 1184 | Float_t ySDDsep = 0.20; |
| 1185 | Float_t ySDD; |
| 1186 | Int_t iSDD; |
| 1187 | Float_t zSDDlay3[6] = { 18.55, 10.95, 3.70, -3.70,-11.20,-18.35}; |
| 1188 | Float_t zSDDlay4[8] = { 25.75, 18.60, 11.00, 3.70, -3.70,-11.20, |
| 1189 | -18.45,-26.05}; |
| 1190 | |
| 1191 | // ladder foot and end-ladder (frame and cooling) |
| 1192 | Float_t iI028dits[3], iI420dits[3], iI421dits[3], iI422dits[6], iI423dits[3]; |
| 1193 | Float_t iI424dits[3], xI424, yI424; |
| 1194 | Float_t iI425dits[3]; |
| 1195 | Int_t indI425; |
| 1196 | Float_t iI029dits[4], iI030dits[4], iI031dits[3], iI032dits[3]; |
| 1197 | |
| 1198 | // SDD ladder frame and cooling |
| 1199 | Float_t iSDDCoolPipe[3] = {1.7000, -0.5500, 0.0000}; |
| 1200 | Float_t iI035dits[3], iI037dits[3], iI038dits[3]; |
| 1201 | Float_t iI039dits[3], xI039, yI039; |
| 1202 | Float_t iI041dits[5]; |
| 1203 | |
| 1204 | // SDD hybrid, chips and capacitors |
| 1205 | Float_t iI050dits[3], xI050, yI050; |
| 1206 | Float_t iI052dits[3], xI052, yI052; |
| 1207 | Float_t iI042dits[3], xI042, yI042; |
| 1208 | Float_t xI042space = 0.17; |
| 1209 | Float_t iI043dits[3], xI043, yI043; |
| 1210 | Float_t xI043space = 0.17; |
| 1211 | Float_t zchip, zChipSpace; |
| 1212 | Float_t iI051dits[3], xI051, yI051, zI051, yI051space, xcap; |
| 1213 | Int_t ichip, icap; |
| 1214 | |
| 1215 | // SDD microcables |
| 1216 | Float_t iI044dits[4], xI044, yI044, volI044; |
| 1217 | Float_t xHV, yHV, zHV, xLV, yLV, zLV; |
| 1218 | Char_t nameHV[5], nameLV[5]; |
| 1219 | |
| 1220 | |
| 1221 | // Define media off-set |
| 1222 | |
| 1223 | Int_t *idtmed = fIdtmed->GetArray()-199; |
| 1224 | |
| 1225 | |
| 1226 | // Rotation matrices |
| 1227 | |
| 1228 | // SPD - option 'b' (this is the default) |
| 1229 | |
| 1230 | //if (option == 2) { |
| 1231 | if (! AliITSInitGeometry::SPDIsTGeoNative()) { |
| 1232 | AliMatrix(idrotm[201],90.0,0.0,90.0,90.0,0.0,0.0); |
| 1233 | AliMatrix(idrotm[202],90.0,90.0,90.0,0.0,0.0,0.0); |
| 1234 | AliMatrix(idrotm[203],90.0,350.0,90.0,260.0,0.0,0.0); |
| 1235 | AliMatrix(idrotm[204],90.0,170.0,90.0,80.0,0.0,0.0); |
| 1236 | AliMatrix(idrotm[205],90.0,10.0,90.0,100.0,0.0,0.0); |
| 1237 | AliMatrix(idrotm[206],90.0,190.0,90.0,280.0,0.0,0.0); |
| 1238 | AliMatrix(idrotm[207],90.0,342.0,90.0,72.0,0.0,0.0); |
| 1239 | AliMatrix(idrotm[208],90.0,156.999893,90.0,246.999893,0.0,0.0); |
| 1240 | AliMatrix(idrotm[209],90.0,147.999802,90.0,237.999893,0.0,0.0); |
| 1241 | AliMatrix(idrotm[210],90.0,138.999802,90.0,228.999802,0.0,0.0); |
| 1242 | AliMatrix(idrotm[211],90.0,129.999802,90.0,219.999802,0.0,0.0); |
| 1243 | AliMatrix(idrotm[212],90.0,36.7896,90.0,126.789597,0.0,0.0); |
| 1244 | AliMatrix(idrotm[213],90.0,343.579712,90.0,73.579697,0.0,0.0); |
| 1245 | AliMatrix(idrotm[214],90.0,95.413696,90.0,185.413696,0.0,0.0); |
| 1246 | AliMatrix(idrotm[215],90.0,5.4141,90.0,95.414101,0.0,0.0); |
| 1247 | AliMatrix(idrotm[216],90.0,318.296906,90.0,48.296902,0.0,0.0); |
| 1248 | AliMatrix(idrotm[217],90.0,67.000099,90.0,157.000107,0.0,0.0); |
| 1249 | AliMatrix(idrotm[218],90.0,337.003998,90.0,67.003998,0.0,0.0); |
| 1250 | AliMatrix(idrotm[219],90.0,247.000305,90.0,337.000305,0.0,0.0); |
| 1251 | AliMatrix(idrotm[220],90.0,305.633514,90.0,35.633499,0.0,0.0); |
| 1252 | |
| 1253 | AliMatrix(idrotm[221],90.0,58.000198,90.0,148.000198,0.0,0.0); |
| 1254 | AliMatrix(idrotm[222],90.0,327.997101,90.0,57.997101,0.0,0.0); |
| 1255 | AliMatrix(idrotm[223],90.0,237.994202,90.0,327.994202,0.0,0.0); |
| 1256 | AliMatrix(idrotm[224],90.0,296.627502,90.0,26.627399,0.0,0.0); |
| 1257 | AliMatrix(idrotm[225],90.0,48.994099,90.0,138.994095,0.0,0.0); |
| 1258 | AliMatrix(idrotm[226],90.0,318.990997,90.0,48.991001,0.0,0.0); |
| 1259 | AliMatrix(idrotm[227],90.0,228.988205,90.0,318.98819,0.0,0.0); |
| 1260 | AliMatrix(idrotm[228],90.0,287.621399,90.0,17.621401,0.0,0.0); |
| 1261 | AliMatrix(idrotm[229],90.0,39.988098,90.0,129.988098,0.0,0.0); |
| 1262 | AliMatrix(idrotm[230],90.0,309.984985,90.0,39.985001,0.0,0.0); |
| 1263 | AliMatrix(idrotm[231],90.0,327.2612,90.0,57.2612,0.0,0.0); |
| 1264 | AliMatrix(idrotm[232],90.0,237.261398,90.0,327.261414,0.0,0.0); |
| 1265 | AliMatrix(idrotm[233],90.0,252.000504,90.0,342.000488,0.0,0.0); |
| 1266 | AliMatrix(idrotm[234],90.0,71.9991,90.0,161.9991,0.0,0.0); |
| 1267 | AliMatrix(idrotm[235],90.0,270.0,90.0,0.0,0.0,0.0); |
| 1268 | AliMatrix(idrotm[236],90.0,180.013702,90.0,270.013702,0.0,0.0); |
| 1269 | AliMatrix(idrotm[237],90.0,90.0,90.0,180.0,0.0,0.0); |
| 1270 | AliMatrix(idrotm[238],90.0,180.0,90.0,270.0,0.0,0.0); |
| 1271 | AliMatrix(idrotm[239],90.0,162.0,90.0,252.0,0.0,0.0); |
| 1272 | AliMatrix(idrotm[240],90.0,310.0,90.0,40.0,0.0,0.0); |
| 1273 | AliMatrix(idrotm[241],90.0,319.0,90.0,49.0,0.0,0.0); |
| 1274 | AliMatrix(idrotm[242],90.0,328.0,90.0,58.0,0.0,0.0); |
| 1275 | AliMatrix(idrotm[243],90.0,337.0,90.0,67.0,0.0,0.0); |
| 1276 | AliMatrix(idrotm[244],90.0,216.0,90.0,306.0,0.0,0.0); |
| 1277 | AliMatrix(idrotm[245],90.0,36.0,90.0,126.0,0.0,0.0); |
| 1278 | AliMatrix(idrotm[246],90.0,108.0,90.0,198.0,0.0,0.0); |
| 1279 | AliMatrix(idrotm[247],90.0,144.0,90.0,234.0,0.0,0.0); |
| 1280 | AliMatrix(idrotm[248],90.0,288.0,90.0,18.0,0.0,0.0); |
| 1281 | AliMatrix(idrotm[249],90.0,324.0,90.0,54.0,0.0,0.0); |
| 1282 | AliMatrix(idrotm[1003],90.0,73.5,90.0,163.5,0.0,0.0); |
| 1283 | AliMatrix(idrotm[1011],90.0,342.0,90.0,72.0,0.0,0.0); |
| 1284 | AliMatrix(idrotm[1039],90.0,72.0,90.0,162.0,0.0,0.0); |
| 1285 | AliMatrix(idrotm[1043],90.0,66.91,90.0,156.91,0.0,0.0); |
| 1286 | AliMatrix(idrotm[1065],90.0,144.0,90.0,234.0,0.0,0.0); |
| 1287 | AliMatrix(idrotm[1078],90.0,180.0,90.0,270.0,0.0,0.0); |
| 1288 | AliMatrix(idrotm[1088],90.0,57.41,90.0,147.41,0.0,0.0); |
| 1289 | AliMatrix(idrotm[1089],90.0,333.0,90.0,63.0,0.0,0.0); |
| 1290 | AliMatrix(idrotm[1090],90.0,351.0,90.0,81.0,0.0,0.0); |
| 1291 | AliMatrix(idrotm[1091],90.0,216.0,90.0,306.0,0.0,0.0); |
| 1292 | AliMatrix(idrotm[1092],90.0,27.0,90.0,117.0,0.0,0.0); |
| 1293 | AliMatrix(idrotm[1093],90.0,18.0,90.0,108.0,0.0,0.0); |
| 1294 | AliMatrix(idrotm[1094],90.0,9.0,90.0,99.0,0.0,0.0); |
| 1295 | AliMatrix(idrotm[1104],90.0,252.0,90.0,342.0,0.0,0.0); |
| 1296 | AliMatrix(idrotm[1106],90.0,36.0,90.0,126.0,0.0,0.0); |
| 1297 | AliMatrix(idrotm[1107],90.0,108.0,90.0,198.0,0.0,0.0); |
| 1298 | AliMatrix(idrotm[1108],90.0,324.0,90.0,54.0,180.0,0.0); |
| 1299 | AliMatrix(idrotm[1109],90.0,0.0,90.0,90.0,180.0,0.0); |
| 1300 | AliMatrix(idrotm[1110],90.0,36.0,90.0,126.0,180.0,0.0); |
| 1301 | AliMatrix(idrotm[1111],90.0,72.0,90.0,162.0,180.0,0.0); |
| 1302 | AliMatrix(idrotm[1112],90.0,108.0,90.0,198.0,180.0,0.0); |
| 1303 | AliMatrix(idrotm[1113],90.0,144.0,90.0,234.0,180.0,0.0); |
| 1304 | AliMatrix(idrotm[1114],90.0,180.0,90.0,270.0,180.0,0.0); |
| 1305 | AliMatrix(idrotm[1115],90.0,216.0,90.0,306.0,180.0,0.0); |
| 1306 | AliMatrix(idrotm[1116],90.0,252.0,90.0,342.0,180.0,0.0); |
| 1307 | AliMatrix(idrotm[1117],90.0,288.0,90.0,18.0,0.0,0.0); |
| 1308 | AliMatrix(idrotm[1118],90.0,288.0,90.0,18.0,180.0,0.0); |
| 1309 | AliMatrix(idrotm[1130],90.0,324.0,90.0,54.0,0.0,0.0); |
| 1310 | }// end if option==2 |
| 1311 | |
| 1312 | // SDD |
| 1313 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 1314 | AliMatrix(idrotm[301],0.0,0.0,90.0,90.0,90.0,180.0); |
| 1315 | AliMatrix(idrotm[302],0.0,0.0,90.0,90.0,90.0,0.0); |
| 1316 | AliMatrix(idrotm[303],180.0,0.0,90.0,90.0,90.0,0.0); |
| 1317 | AliMatrix(idrotm[304],180.0,0.0,90.0,90.0,90.0,180.0); |
| 1318 | AliMatrix(idrotm[305],90.0,347.14,90.0,77.14,0.0,0.0); |
| 1319 | AliMatrix(idrotm[306],90.0,321.43,90.0,51.43,0.0,0.0); |
| 1320 | AliMatrix(idrotm[307],90.0,295.71,90.0,25.71,0.0,0.0); |
| 1321 | AliMatrix(idrotm[308],90.0,244.29,90.0,334.29,0.0,0.0); |
| 1322 | AliMatrix(idrotm[309],90.0,218.57,90.0,308.57,0.0,0.0); |
| 1323 | AliMatrix(idrotm[310],90.0,167.14,90.0,257.14,0.0,0.0); |
| 1324 | AliMatrix(idrotm[311],90.0,141.43,90.0,231.43,0.0,0.0); |
| 1325 | AliMatrix(idrotm[312],90.0,0.0,0.0,0.0,90.0,270.0); |
| 1326 | AliMatrix(idrotm[313],90.0,115.71,90.0,205.71,0.0,0.0); |
| 1327 | AliMatrix(idrotm[314],90.0,335.45,90.0,65.45,0.0,0.0); |
| 1328 | AliMatrix(idrotm[315],90.0,319.09,90.0,49.09,0.0,0.0); |
| 1329 | AliMatrix(idrotm[316],90.0,302.73,90.0,32.73,0.0,0.0); |
| 1330 | AliMatrix(idrotm[317],90.0,286.36,90.0,16.36,0.0,0.0); |
| 1331 | AliMatrix(idrotm[318],90.0,270.0,90.0,360.0,0.0,0.0); |
| 1332 | AliMatrix(idrotm[319],90.0,253.64,90.0,343.64,0.0,0.0); |
| 1333 | AliMatrix(idrotm[320],90.0,237.27,90.0,327.27,0.0,0.0); |
| 1334 | AliMatrix(idrotm[321],90.0,12.86,90.0,102.86,0.0,0.0); |
| 1335 | AliMatrix(idrotm[322],90.0,220.91,90.0,310.91,0.0,0.0); |
| 1336 | AliMatrix(idrotm[323],90.0,204.55,90.0,294.55,0.0,0.0); |
| 1337 | AliMatrix(idrotm[324],90.0,188.18,90.0,278.18,0.0,0.0); |
| 1338 | AliMatrix(idrotm[325],90.0,171.82,90.0,261.82,0.0,0.0); |
| 1339 | AliMatrix(idrotm[326],90.0,155.45,90.0,245.45,0.0,0.0); |
| 1340 | AliMatrix(idrotm[327],90.0,139.09,90.0,229.09,0.0,0.0); |
| 1341 | AliMatrix(idrotm[328],90.0,122.73,90.0,212.73,0.0,0.0); |
| 1342 | AliMatrix(idrotm[329],90.0,106.36,90.0,196.36,0.0,0.0); |
| 1343 | AliMatrix(idrotm[330],90.0,73.64,90.0,163.64,0.0,0.0); |
| 1344 | AliMatrix(idrotm[331],90.0,40.91,90.0,130.91,0.0,0.0); |
| 1345 | AliMatrix(idrotm[332],90.0,24.55,90.0,114.55,0.0,0.0); |
| 1346 | AliMatrix(idrotm[333],90.0,38.57,90.0,128.57,0.0,0.0); |
| 1347 | AliMatrix(idrotm[334],90.0,351.82,90.0,81.82,0.0,0.0); |
| 1348 | AliMatrix(idrotm[335],90.0,8.18,90.0,98.18,0.0,0.0); |
| 1349 | AliMatrix(idrotm[336],90.0,64.29,90.0,154.29,0.0,0.0); |
| 1350 | AliMatrix(idrotm[337],111.0,300.0,21.0,300.0,90.0,30.0); |
| 1351 | AliMatrix(idrotm[338],69.0,240.0,159.0,240.0,90.0,150.0); |
| 1352 | AliMatrix(idrotm[339],111.0,240.0,21.0,240.0,90.0,150.0); |
| 1353 | AliMatrix(idrotm[340],69.0,300.0,159.0,300.0,90.0,30.0); |
| 1354 | AliMatrix(idrotm[341],128.0,0.0,38.0,0.0,90.0,270.0); |
| 1355 | AliMatrix(idrotm[342],90.0,240.0,180.0,0.0,90.0,330.); |
| 1356 | AliMatrix(idrotm[343],90.0,120.0,180.0,0.0,90.0,210.0); |
| 1357 | AliMatrix(idrotm[344],90.0,0.0,180.0,0.0,90.0,90.0); |
| 1358 | AliMatrix(idrotm[345],90.0,180.0,90.0,90.0,0.0,0.0); |
| 1359 | AliMatrix(idrotm[346],90.0,300.0,90.0,30.0,0.0,0.0); |
| 1360 | AliMatrix(idrotm[347],90.0,240.0,90.0,150.0,0.0,0.0); |
| 1361 | AliMatrix(idrotm[348],90.0,180.0,0.0,0.0,90.0,270.0); |
| 1362 | AliMatrix(idrotm[349],90.0,235.0,90.0,145.0,0.0,0.0); |
| 1363 | AliMatrix(idrotm[350],90.0,90.0,90.0,180.0,0.0,0.0); |
| 1364 | AliMatrix(idrotm[351],90.0,305.0,90.0,35.0,0.0,0.0); |
| 1365 | AliMatrix(idrotm[352],0.0,0.0,90.0,0.0,90.0,90.0); |
| 1366 | AliMatrix(idrotm[353],90.0,60.0,90.0,150.0,0.0,0.0); |
| 1367 | AliMatrix(idrotm[354],90.0,120.0,90.0,30.0,0.0,0.0); |
| 1368 | AliMatrix(idrotm[355],90.0,180.0,90.0,90.0,180.0,0.0); |
| 1369 | AliMatrix(idrotm[356],90.0,270.0,90.0,0.0,0.0,0.0); |
| 1370 | AliMatrix(idrotm[366],90.0,57.27,90.0,147.27,0.0,0.0); |
| 1371 | AliMatrix(idrotm[386],90.0,192.86,90.0,282.86,0.0,0.0); |
| 1372 | } |
| 1373 | |
| 1374 | // SSD |
| 1375 | if (! AliITSInitGeometry::SSDIsTGeoNative()) { |
| 1376 | AliMatrix(idrotm[501],90.0,148.24,90.0,238.24,0.0,0.0); |
| 1377 | AliMatrix(idrotm[503],90.0,137.65,90.0,227.65,0.0,0.0); |
| 1378 | AliMatrix(idrotm[504],90.0,127.06,90.0,217.06,0.0,0.0); |
| 1379 | AliMatrix(idrotm[505],90.0,116.47,90.0,206.47,0.0,0.0); |
| 1380 | AliMatrix(idrotm[506],90.0,105.88,90.0,195.88,0.0,0.0); |
| 1381 | AliMatrix(idrotm[507],90.0,95.29,90.0,185.29,0.0,0.0); |
| 1382 | AliMatrix(idrotm[508],90.0,84.71,90.0,174.71,0.0,0.0); |
| 1383 | AliMatrix(idrotm[509],90.0,74.12,90.0,164.12,0.0,0.0); |
| 1384 | AliMatrix(idrotm[510],90.0,63.53,90.0,153.53,0.0,0.0); |
| 1385 | AliMatrix(idrotm[511],90.0,52.94,90.0,142.94,0.0,0.0); |
| 1386 | AliMatrix(idrotm[512],90.0,42.35,90.0,132.35,0.0,0.0); |
| 1387 | AliMatrix(idrotm[513],90.0,31.76,90.0,121.76,0.0,0.0); |
| 1388 | AliMatrix(idrotm[514],90.0,10.59,90.0,100.59,0.0,0.0); |
| 1389 | AliMatrix(idrotm[515],90.0,349.41,90.0,79.41,0.0,0.0); |
| 1390 | AliMatrix(idrotm[516],90.0,338.82,90.0,68.82,0.0,0.0); |
| 1391 | AliMatrix(idrotm[517],90.0,328.24,90.0,58.24,0.0,0.0); |
| 1392 | AliMatrix(idrotm[518],90.0,317.65,90.0,47.65,0.0,0.0); |
| 1393 | AliMatrix(idrotm[519],90.0,307.06,90.0,37.06,0.0,0.0); |
| 1394 | AliMatrix(idrotm[520],90.0,296.47,90.0,26.47,0.0,0.0); |
| 1395 | AliMatrix(idrotm[521],90.0,285.88,90.0,15.88,0.0,0.0); |
| 1396 | AliMatrix(idrotm[522],90.0,275.29,90.0,5.29,0.0,0.0); |
| 1397 | AliMatrix(idrotm[523],90.0,264.71,90.0,354.71,0.0,0.0); |
| 1398 | AliMatrix(idrotm[524],90.0,254.12,90.0,344.12,0.0,0.0); |
| 1399 | AliMatrix(idrotm[525],90.0,243.53,90.0,333.53,0.0,0.0); |
| 1400 | AliMatrix(idrotm[526],90.0,232.94,90.0,322.94,0.0,0.0); |
| 1401 | AliMatrix(idrotm[527],90.0,222.35,90.0,312.35,0.0,0.0); |
| 1402 | AliMatrix(idrotm[528],90.0,211.76,90.0,301.76,0.0,0.0); |
| 1403 | AliMatrix(idrotm[529],90.0,190.59,90.0,280.59,0.0,0.0); |
| 1404 | AliMatrix(idrotm[530],90.0,169.41,90.0,259.41,0.0,0.0); |
| 1405 | AliMatrix(idrotm[531],90.0,158.82,90.0,248.82,0.0,0.0); |
| 1406 | AliMatrix(idrotm[532],90.0,360.0,90.0,90.0,0.0,0.0); |
| 1407 | AliMatrix(idrotm[533],90.0,180.0,90.0,270.0,0.0,0.0); |
| 1408 | AliMatrix(idrotm[534],90.0,189.47,90.0,279.47,0.0,0.0); |
| 1409 | AliMatrix(idrotm[535],90.0,198.95,90.0,288.95,0.0,0.0); |
| 1410 | AliMatrix(idrotm[537],90.0,217.89,90.0,307.89,0.0,0.0); |
| 1411 | AliMatrix(idrotm[538],90.0,227.37,90.0,317.37,0.0,0.0); |
| 1412 | AliMatrix(idrotm[539],90.0,236.84,90.0,326.84,0.0,0.0); |
| 1413 | AliMatrix(idrotm[540],90.0,246.32,90.0,336.32,0.0,0.0); |
| 1414 | AliMatrix(idrotm[541],90.0,255.79,90.0,345.79,0.0,0.0); |
| 1415 | AliMatrix(idrotm[542],90.0,265.26,90.0,355.26,0.0,0.0); |
| 1416 | AliMatrix(idrotm[543],90.0,274.74,90.0,4.74,0.0,0.0); |
| 1417 | AliMatrix(idrotm[544],90.0,284.21,90.0,14.21,0.0,0.0); |
| 1418 | AliMatrix(idrotm[545],90.0,293.68,90.0,23.68,0.0,0.0); |
| 1419 | AliMatrix(idrotm[546],90.0,303.16,90.0,33.16,0.0,0.0); |
| 1420 | AliMatrix(idrotm[547],90.0,312.63,90.0,42.63,0.0,0.0); |
| 1421 | AliMatrix(idrotm[548],90.0,322.11,90.0,52.11,0.0,0.0); |
| 1422 | AliMatrix(idrotm[549],90.0,331.58,90.0,61.58,0.0,0.0); |
| 1423 | AliMatrix(idrotm[550],90.0,341.05,90.0,71.05,0.0,0.0); |
| 1424 | AliMatrix(idrotm[551],90.0,350.53,90.0,80.53,0.0,0.0); |
| 1425 | AliMatrix(idrotm[552],90.0,9.47,90.0,99.47,0.0,0.0); |
| 1426 | AliMatrix(idrotm[553],90.0,18.95,90.0,108.95,0.0,0.0); |
| 1427 | AliMatrix(idrotm[555],90.0,37.89,90.0,127.89,0.0,0.0); |
| 1428 | AliMatrix(idrotm[556],90.0,47.37,90.0,137.37,0.0,0.0); |
| 1429 | AliMatrix(idrotm[557],90.0,56.84,90.0,146.84,0.0,0.0); |
| 1430 | AliMatrix(idrotm[558],90.0,66.32,90.0,156.32,0.0,0.0); |
| 1431 | AliMatrix(idrotm[559],90.0,75.79,90.0,165.79,0.0,0.0); |
| 1432 | AliMatrix(idrotm[560],90.0,85.26,90.0,175.26,0.0,0.0); |
| 1433 | AliMatrix(idrotm[561],90.0,94.74,90.0,184.74,0.0,0.0); |
| 1434 | AliMatrix(idrotm[562],90.0,104.21,90.0,194.21,0.0,0.0); |
| 1435 | AliMatrix(idrotm[563],90.0,113.68,90.0,203.68,0.0,0.0); |
| 1436 | AliMatrix(idrotm[564],90.0,123.16,90.0,213.16,0.0,0.0); |
| 1437 | AliMatrix(idrotm[565],90.0,132.63,90.0,222.63,0.0,0.0); |
| 1438 | AliMatrix(idrotm[566],90.0,142.11,90.0,232.11,0.0,0.0); |
| 1439 | AliMatrix(idrotm[567],90.0,151.58,90.0,241.58,0.0,0.0); |
| 1440 | AliMatrix(idrotm[568],90.0,161.05,90.0,251.05,0.0,0.0); |
| 1441 | AliMatrix(idrotm[569],90.0,170.53,90.0,260.53,0.0,0.0); |
| 1442 | AliMatrix(idrotm[570],90.0,180.0,90.0,90.0,180.0,0.0); |
| 1443 | AliMatrix(idrotm[571],90.0,0.0,0.0,0.0,90.0,270.0); |
| 1444 | AliMatrix(idrotm[572],90.0,180.0,0.0,0.0,90.0,270.0); |
| 1445 | AliMatrix(idrotm[573],90.0,180.0,90.0,90.0,0.0,0.0); |
| 1446 | AliMatrix(idrotm[575],90.0,120.0,180.0,0.0,90.0,210.0); |
| 1447 | AliMatrix(idrotm[576],65.71,300.0,90.0,30.0,24.29,120.0); |
| 1448 | AliMatrix(idrotm[577],114.29,300.0,90.0,30.0,155.71,120.0); |
| 1449 | AliMatrix(idrotm[579],65.71,240.0,90.0,150.0,24.29,60.0); |
| 1450 | AliMatrix(idrotm[580],114.29,240.0,90.0,150.0,155.71,60.0); |
| 1451 | AliMatrix(idrotm[581],90.0,240.0,180.0,0.0,90.0,330.0); |
| 1452 | AliMatrix(idrotm[583],90.0,0.0,180.0,0.0,90.0,90.0); |
| 1453 | AliMatrix(idrotm[584],90.0,180.0,180.0,0.0,90.0,90.0); |
| 1454 | AliMatrix(idrotm[586],180.0,0.0,90.0,90.0,90.0,0.0); |
| 1455 | AliMatrix(idrotm[618],90.0,201.18,90.0,291.18,0.0,0.0); |
| 1456 | AliMatrix(idrotm[620],90.0,28.42,90.0,118.42,0.0,0.0); |
| 1457 | AliMatrix(idrotm[623],90.0,208.42,90.0,298.42,0.0,0.0); |
| 1458 | AliMatrix(idrotm[633],132.46,0.0,90.0,90.0,42.46,360.0); |
| 1459 | AliMatrix(idrotm[653],90.0,21.18,90.0,111.18,0.0,0.0); |
| 1460 | } |
| 1461 | |
| 1462 | // SDD cone |
| 1463 | if (! AliITSInitGeometry::SDDconeIsTGeoNative()) { |
| 1464 | AliMatrix(idrotm[846],90.0,300.0,90.0,30.0,0.0,0.0); |
| 1465 | AliMatrix(idrotm[851],90.0,305.0,90.0,35.0,0.0,0.0); |
| 1466 | AliMatrix(idrotm[853],90.0,60.0,90.0,150.0,0.0,0.0); |
| 1467 | AliMatrix(idrotm[856],90.0,0.0,90.0,90.0,180.0,0.0); |
| 1468 | AliMatrix(idrotm[857],90.0,5.0,90.0,95.0,180.0,0.0); |
| 1469 | AliMatrix(idrotm[858],90.0,65.0,90.0,155.0,180.0,0.0); |
| 1470 | AliMatrix(idrotm[859],90.0,305.0,90.0,35.0,180.0,0.0); |
| 1471 | AliMatrix(idrotm[860],90.0,245.0,90.0,335.0,180.0,0.0); |
| 1472 | AliMatrix(idrotm[861],90.0,185.0,90.0,275.0,180.0,0.0); |
| 1473 | AliMatrix(idrotm[862],90.0,125.0,90.0,215.0,180.0,0.0); |
| 1474 | AliMatrix(idrotm[863],90.0,257.5,90.0,347.5,180.0,0.0); |
| 1475 | AliMatrix(idrotm[864],90.0,227.5,90.0,317.5,180.0,0.0); |
| 1476 | AliMatrix(idrotm[865],90.0,197.5,90.0,287.5,180.0,0.0); |
| 1477 | AliMatrix(idrotm[867],90.0,167.5,90.0,257.5,180.0,0.0); |
| 1478 | AliMatrix(idrotm[868],90.0,287.5,90.0,17.5,0.0,0.0); |
| 1479 | AliMatrix(idrotm[869],90.0,137.5,90.0,227.5,180.0,0.0); |
| 1480 | AliMatrix(idrotm[870],90.0,107.5,90.0,197.5,180.0,0.0); |
| 1481 | AliMatrix(idrotm[871],90.0,77.5,90.0,167.5,180.0,0.0); |
| 1482 | AliMatrix(idrotm[872],90.0,47.5,90.0,137.5,180.0,0.0); |
| 1483 | AliMatrix(idrotm[873],90.0,17.5,90.0,107.5,180.0,0.0); |
| 1484 | AliMatrix(idrotm[874],90.0,347.5,90.0,77.5,180.0,0.0); |
| 1485 | AliMatrix(idrotm[875],90.0,317.5,90.0,47.5,180.0,0.0); |
| 1486 | AliMatrix(idrotm[876],90.0,287.5,90.0,17.5,180.0,0.0); |
| 1487 | AliMatrix(idrotm[877],90.0,185.0,90.0,275.0,0.0,0.0); |
| 1488 | AliMatrix(idrotm[878],90.0,180.0,90.0,270.0,0.0,0.0); |
| 1489 | AliMatrix(idrotm[879],90.0,125.0,90.0,215.0,0.0,0.0); |
| 1490 | AliMatrix(idrotm[880],90.0,65.0,90.0,155.0,0.0,0.0); |
| 1491 | AliMatrix(idrotm[881],90.0,5.0,90.0,95.0,0.0,0.0); |
| 1492 | AliMatrix(idrotm[882],90.0,245.0,90.0,335.0,0.0,0.0); |
| 1493 | AliMatrix(idrotm[883],90.0,47.5,90.0,137.5,0.0,0.0); |
| 1494 | AliMatrix(idrotm[884],90.0,77.5,90.0,167.5,0.0,0.0); |
| 1495 | AliMatrix(idrotm[885],90.0,107.5,90.0,197.5,0.0,0.0); |
| 1496 | AliMatrix(idrotm[887],90.0,137.5,90.0,227.5,0.0,0.0); |
| 1497 | AliMatrix(idrotm[888],90.0,167.5,90.0,257.5,0.0,0.0); |
| 1498 | AliMatrix(idrotm[889],90.0,197.5,90.0,287.5,0.0,0.0); |
| 1499 | AliMatrix(idrotm[890],90.0,227.5,90.0,317.5,0.0,0.0); |
| 1500 | AliMatrix(idrotm[891],90.0,347.5,90.0,77.5,0.0,0.0); |
| 1501 | AliMatrix(idrotm[892],90.0,317.5,90.0,47.5,0.0,0.0); |
| 1502 | AliMatrix(idrotm[893],90.0,257.5,90.0,347.5,0.0,0.0); |
| 1503 | AliMatrix(idrotm[894],90.0,270.0,0.0,0.0,90.0,180.0); |
| 1504 | AliMatrix(idrotm[895],90.0,286.36,0.0,0.0,90.0,196.36); |
| 1505 | AliMatrix(idrotm[896],90.0,302.73,0.0,0.0,90.0,212.73); |
| 1506 | AliMatrix(idrotm[897],90.0,319.09,0.0,0.0,90.0,229.09); |
| 1507 | AliMatrix(idrotm[898],90.0,17.5,90.0,107.5,0.0,0.0); |
| 1508 | AliMatrix(idrotm[899],90.0,335.45,0.0,0.0,90.0,245.45); |
| 1509 | AliMatrix(idrotm[900],90.0,351.82,0.0,0.0,90.0,261.82); |
| 1510 | AliMatrix(idrotm[901],90.0,8.18,0.0,0.0,90.0,278.18); |
| 1511 | AliMatrix(idrotm[902],90.0,24.55,0.0,0.0,90.0,294.55); |
| 1512 | AliMatrix(idrotm[903],90.0,40.91,0.0,0.0,90.0,310.91); |
| 1513 | AliMatrix(idrotm[904],90.0,57.27,0.0,0.0,90.0,327.27); |
| 1514 | AliMatrix(idrotm[905],90.0,73.64,0.0,0.0,90.0,343.64); |
| 1515 | AliMatrix(idrotm[906],90.0,90.0,0.0,0.0,90.0,360.0); |
| 1516 | AliMatrix(idrotm[907],90.0,106.36,0.0,0.0,90.0,16.36); |
| 1517 | AliMatrix(idrotm[908],90.0,122.73,0.0,0.0,90.0,32.73); |
| 1518 | AliMatrix(idrotm[909],90.0,139.09,0.0,0.0,90.0,49.09); |
| 1519 | AliMatrix(idrotm[910],90.0,155.45,0.0,0.0,90.0,65.45); |
| 1520 | AliMatrix(idrotm[911],90.0,171.82,0.0,0.0,90.0,81.82); |
| 1521 | AliMatrix(idrotm[912],90.0,188.18,0.0,0.0,90.0,98.18); |
| 1522 | AliMatrix(idrotm[913],90.0,204.55,0.0,0.0,90.0,114.55); |
| 1523 | AliMatrix(idrotm[914],90.0,220.91,0.0,0.0,90.0,130.91); |
| 1524 | AliMatrix(idrotm[915],90.0,237.27,0.0,0.0,90.0,147.27); |
| 1525 | AliMatrix(idrotm[916],90.0,253.64,0.0,0.0,90.0,163.64); |
| 1526 | AliMatrix(idrotm[917],90.0,295.71,0.0,0.0,90.0,205.71); |
| 1527 | AliMatrix(idrotm[918],90.0,321.43,0.0,0.0,90.0,231.43); |
| 1528 | AliMatrix(idrotm[919],90.0,347.14,0.0,0.0,90.0,257.14); |
| 1529 | AliMatrix(idrotm[920],90.0,12.86,0.0,0.0,90.0,282.86); |
| 1530 | AliMatrix(idrotm[921],90.0,38.57,0.0,0.0,90.0,308.57); |
| 1531 | AliMatrix(idrotm[922],90.0,64.29,0.0,0.0,90.0,334.29); |
| 1532 | AliMatrix(idrotm[923],90.0,115.71,0.0,0.0,90.0,25.71); |
| 1533 | AliMatrix(idrotm[924],90.0,141.43,0.0,0.0,90.0,51.43); |
| 1534 | AliMatrix(idrotm[925],90.0,167.14,0.0,0.0,90.0,77.14); |
| 1535 | AliMatrix(idrotm[926],90.0,192.86,0.0,0.0,90.0,102.86); |
| 1536 | AliMatrix(idrotm[927],90.0,218.57,0.0,0.0,90.0,128.57); |
| 1537 | AliMatrix(idrotm[928],90.0,244.29,0.0,0.0,90.0,154.29); |
| 1538 | AliMatrix(idrotm[929],90.0,120.0,90.0,210.0,0.0,0.0); |
| 1539 | AliMatrix(idrotm[930],90.0,240.0,90.0,330.0,0.0,0.0); |
| 1540 | AliMatrix(idrotm[931],90.0,60.0,90.0,150.0,180.0,0.0); |
| 1541 | AliMatrix(idrotm[932],90.0,120.0,90.0,210.0,180.0,0.0); |
| 1542 | AliMatrix(idrotm[933],90.0,180.0,90.0,270.0,180.0,0.0); |
| 1543 | AliMatrix(idrotm[934],90.0,240.0,90.0,330.0,180.0,0.0); |
| 1544 | AliMatrix(idrotm[935],90.0,300.0,90.0,30.0,180.0,0.0); |
| 1545 | } |
| 1546 | |
| 1547 | // SSD cone |
| 1548 | if (! AliITSInitGeometry::SSDconeIsTGeoNative()) { |
| 1549 | AliMatrix(idrotm[701],90.0,0.0,90.0,90.0,180.0,0.0); |
| 1550 | AliMatrix(idrotm[702],90.0,347.5,90.0,77.5,180.0,0.0); |
| 1551 | AliMatrix(idrotm[703],90.0,17.5,90.0,107.5,180.0,0.0); |
| 1552 | AliMatrix(idrotm[704],90.0,47.5,90.0,137.5,180.0,0.0); |
| 1553 | AliMatrix(idrotm[705],90.0,77.5,90.0,167.5,180.0,0.0); |
| 1554 | AliMatrix(idrotm[706],90.0,107.5,90.0,197.5,180.0,0.0); |
| 1555 | AliMatrix(idrotm[707],90.0,137.5,90.0,227.5,180.0,0.0); |
| 1556 | AliMatrix(idrotm[708],90.0,167.5,90.0,257.5,180.0,0.0); |
| 1557 | AliMatrix(idrotm[709],90.0,197.5,90.0,287.5,180.0,0.0); |
| 1558 | AliMatrix(idrotm[710],90.0,227.5,90.0,317.5,180.0,0.0); |
| 1559 | AliMatrix(idrotm[711],90.0,257.5,90.0,347.5,180.0,0.0); |
| 1560 | AliMatrix(idrotm[712],90.0,287.5,90.0,17.5,180.0,0.0); |
| 1561 | AliMatrix(idrotm[713],90.0,317.5,90.0,47.5,180.0,0.0); |
| 1562 | AliMatrix(idrotm[714],90.0,328.4,90.0,58.4,180.0,0.0); |
| 1563 | AliMatrix(idrotm[715],90.0,28.4,90.0,118.4,180.0,0.0); |
| 1564 | AliMatrix(idrotm[716],90.0,88.4,90.0,178.4,180.0,0.0); |
| 1565 | AliMatrix(idrotm[717],90.0,148.4,90.0,238.4,180.0,0.0); |
| 1566 | AliMatrix(idrotm[718],90.0,208.4,90.0,298.4,180.0,0.0); |
| 1567 | AliMatrix(idrotm[719],90.0,268.4,90.0,358.4,180.0,0.0); |
| 1568 | AliMatrix(idrotm[720],90.0,28.4,90.0,118.4,0.0,0.0); |
| 1569 | AliMatrix(idrotm[721],90.0,88.4,90.0,178.4,0.0,0.0); |
| 1570 | AliMatrix(idrotm[722],90.0,148.4,90.0,238.4,0.0,0.0); |
| 1571 | AliMatrix(idrotm[723],90.0,208.4,90.0,298.4,0.0,0.0); |
| 1572 | AliMatrix(idrotm[724],90.0,268.4,90.0,358.4,0.0,0.0); |
| 1573 | AliMatrix(idrotm[725],90.0,328.4,90.0,58.4,0.0,0.0); |
| 1574 | AliMatrix(idrotm[726],90.0,77.5,90.0,167.5,0.0,0.0); |
| 1575 | AliMatrix(idrotm[727],90.0,107.5,90.0,197.5,0.0,0.0); |
| 1576 | AliMatrix(idrotm[728],90.0,137.5,90.0,227.5,0.0,0.0); |
| 1577 | AliMatrix(idrotm[729],90.0,167.5,90.0,257.5,0.0,0.0); |
| 1578 | AliMatrix(idrotm[730],90.0,227.5,90.0,317.5,0.0,0.0); |
| 1579 | AliMatrix(idrotm[731],90.0,257.5,90.0,347.5,0.0,0.0); |
| 1580 | AliMatrix(idrotm[732],90.0,317.5,90.0,47.5,0.0,0.0); |
| 1581 | AliMatrix(idrotm[733],90.0,197.5,90.0,287.5,0.0,0.0); |
| 1582 | AliMatrix(idrotm[734],90.0,347.5,90.0,77.5,0.0,0.0); |
| 1583 | AliMatrix(idrotm[735],90.0,47.5,90.0,137.5,0.0,0.0); |
| 1584 | AliMatrix(idrotm[768],90.0,287.5,90.0,17.5,0.0,0.0); |
| 1585 | AliMatrix(idrotm[798],90.0,17.5,90.0,107.5,0.0,0.0); |
| 1586 | } |
| 1587 | |
| 1588 | // Services |
| 1589 | AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.); |
| 1590 | |
| 1591 | // New reference frame: z---> -z; x ---> -x; y ---> y |
| 1592 | AliMatrix(idrotm[199], 90.,180., 90.,90., 180.,0.); |
| 1593 | |
| 1594 | // CONVERT INTO CM (RL(SI)=9.36 CM) |
| 1595 | for (i = 0; i < 6; ++i) { |
| 1596 | drl[i] = drl[i] / 100. * 9.36; |
| 1597 | } // end for i |
| 1598 | |
| 1599 | // FIELD CAGE HALF LENGTH |
| 1600 | rlim = 50.; |
| 1601 | zmax = 74.; |
| 1602 | ztpc = 284.; |
| 1603 | // --- Define ghost volume containing the whole ITS (including services) |
| 1604 | // and fill it with air |
| 1605 | dgh[0] = 0.; |
| 1606 | dgh[1] = 360.; |
| 1607 | dgh[2] = 16.; |
| 1608 | dgh[3] = -ztpc-5.-0.1; |
| 1609 | dgh[4] = 46; |
| 1610 | dgh[5] = 85.; |
| 1611 | dgh[6] = -ztpc; |
| 1612 | dgh[7] = 46; |
| 1613 | dgh[8] = 85.; |
| 1614 | dgh[9] = -ztpc; |
| 1615 | dgh[10] = 46; |
| 1616 | dgh[11] = rlim+7.5; |
| 1617 | dgh[12] = -97.5; |
| 1618 | dgh[13] = 46; |
| 1619 | dgh[14] = rlim+7.5; |
| 1620 | dgh[15] = -zmax; |
| 1621 | dgh[16] = 46; |
| 1622 | dgh[17] = rlim+7.5; |
| 1623 | dgh[18] = -48; |
| 1624 | dgh[19] = 6; |
| 1625 | dgh[20] = rlim+7.5; |
| 1626 | dgh[21] = -28.6; |
| 1627 | dgh[22] = 6; |
| 1628 | dgh[23] = rlim+7.5; |
| 1629 | dgh[24] = -27.6; |
| 1630 | dgh[25] = 3.295; |
| 1631 | dgh[26] = rlim+7.5; |
| 1632 | dgh[27] = 27.6; |
| 1633 | dgh[28] = 3.295; |
| 1634 | dgh[29] = rlim+7.5; |
| 1635 | dgh[30] = 28.6; |
| 1636 | dgh[31] = 6; |
| 1637 | dgh[32] = rlim+7.5; |
| 1638 | dgh[33] = 48; |
| 1639 | dgh[34] = 6; |
| 1640 | dgh[35] = rlim+7.5; |
| 1641 | dgh[36] = zmax; |
| 1642 | dgh[37] = 46; |
| 1643 | dgh[38] = rlim+7.5; |
| 1644 | dgh[39] = 97.5; |
| 1645 | dgh[40] = 46; |
| 1646 | dgh[41] = rlim+7.5; |
| 1647 | dgh[42] = ztpc; |
| 1648 | dgh[43] = 62; |
| 1649 | dgh[44] = 62+4.; |
| 1650 | dgh[45] = ztpc; |
| 1651 | dgh[46] = 62; |
| 1652 | dgh[47] = 85.; |
| 1653 | dgh[48] = ztpc+4.+0.1; |
| 1654 | dgh[49] = 62.0;//62.4; |
| 1655 | dgh[50] = 85.; |
| cc8a4c78 |
1656 | // gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51); |
| 4737b5bb |
1657 | new TGeoVolumeAssembly("ITSV"); |
| 1c5895a3 |
1658 | new TGeoVolumeAssembly("ITSS"); |
| cc8a4c78 |
1659 | |
| 108bd0fe |
1660 | // --- Place the ghost volume in its mother volume (ALIC) and make it |
| 1661 | // invisible |
| 1662 | // gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY"); |
| 1663 | //gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., idrotm[199], "MANY"); |
| 8c05a508 |
1664 | //gGeoManager->SetVolumeAttribute("ITSV", "SEEN", 0); |
| 108bd0fe |
1665 | |
| 1666 | //gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "MANY"); //=== LG |
| 1667 | gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY"); //=== LG |
| 1c5895a3 |
1668 | gMC->Gspos("ITSS", 1, "ALIC", 0., 0., 0., 0, "ONLY"); //=== MS |
| 108bd0fe |
1669 | |
| 1670 | |
| 1671 | // --- Define ghost volume containing the six layers and fill it with air |
| 1672 | |
| 1673 | // dgh[0] = 0.; |
| 1674 | // dgh[1] = 360.; |
| 1675 | // dgh[2] = 8.; |
| 1676 | // dgh[3] = -zmax; |
| 1677 | // dgh[4] = 46.; |
| 1678 | // dgh[5] = rlim; |
| 1679 | // dgh[6] = -47.5; |
| 1680 | // dgh[7] = 6.005; |
| 1681 | // dgh[8] = rlim; |
| 1682 | // dgh[9] = -28.5; |
| 1683 | // dgh[10] = 6.005; |
| 1684 | // dgh[11] = rlim; |
| 1685 | // dgh[12] = -27.5; |
| 1686 | // dgh[13] = 3.3; |
| 1687 | // dgh[14] = rlim; |
| 1688 | // dgh[15] = 27.5; |
| 1689 | // dgh[16] = 3.3; |
| 1690 | // dgh[17] = rlim; |
| 1691 | // dgh[18] = 28.5; |
| 1692 | // dgh[19] = 6.005; |
| 1693 | // dgh[20] = rlim; |
| 1694 | // dgh[21] = 47.5; |
| 1695 | // dgh[22] = 6.005; |
| 1696 | // dgh[23] = rlim; |
| 1697 | // dgh[24] = zmax; |
| 1698 | // dgh[25] = 46.; |
| 1699 | // dgh[26] = rlim; |
| 1700 | // gMC->Gsvolu("ITSD", "PCON", idtmed[205], dgh, 27); |
| 1701 | |
| 1702 | // --- Place the ghost volume in its mother volume (ITSV) and make it |
| 1703 | // invisible |
| 1704 | //gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY"); |
| 8c05a508 |
1705 | //gGeoManager->SetVolumeAttribute("ITSD", "SEEN", 0); |
| 108bd0fe |
1706 | |
| 1707 | //====================================================================== |
| 1708 | // Let's make ITSD an assembly, because we can then add the new geometry |
| 1709 | // inside this volume without belonging to it. |
| 1710 | // |
| 1711 | // The 180° rotation (which was done for switching from the old |
| 1712 | // coordinate system to the new one) is applied on ITSD, not ITSV, |
| 1713 | // because ITSV will also contain the new geometry. |
| 1714 | // LG |
| 1715 | //====================================================================== |
| 1716 | |
| 1717 | //TGeoVolumeAssembly *dITS = new TGeoVolumeAssembly("ITSD"); |
| 40e2e5ea |
1718 | if (! AliITSInitGeometry::SPDshieldIsTGeoNative() || |
| 1719 | ! AliITSInitGeometry::SPDIsTGeoNative() || |
| 1720 | ! AliITSInitGeometry::SDDIsTGeoNative() || |
| 1721 | ! AliITSInitGeometry::SSDIsTGeoNative() || |
| 1722 | ! AliITSInitGeometry::SDDconeIsTGeoNative() || |
| 1723 | ! AliITSInitGeometry::SSDconeIsTGeoNative() ) { |
| 108bd0fe |
1724 | new TGeoVolumeAssembly("ITSD"); |
| 1725 | gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., idrotm[199], "ONLY"); |
| 40e2e5ea |
1726 | } |
| 108bd0fe |
1727 | |
| 1728 | // --- Define SPD (option 'b') volumes ---------------------------- |
| 1729 | |
| 1730 | // SPD - option 'b' |
| 1731 | // (this is the default) |
| 1732 | |
| 1733 | //if (option == 2) { |
| 1734 | if (! AliITSInitGeometry::SPDIsTGeoNative()) { |
| 1735 | |
| 1736 | dits[0] = 3.7; |
| 1737 | dits[1] = 7.75; |
| 1738 | dits[2] = 26.1; |
| 1739 | gMC->Gsvolu("IT12", "TUBE", idtmed[254], dits, 3); |
| 1740 | |
| 1741 | dits[0] = 3.7; |
| 1742 | dits[1] = 7.7; |
| 1743 | dits[2] = 24; |
| 1744 | dits[3] = 57; |
| 1745 | dits[4] = 100; |
| 1746 | gMC->Gsvolu("I12B", "TUBS", idtmed[254], dits, 5); // sector |
| 1747 | |
| 1748 | di10b[0] = 0.843; |
| 1749 | di10b[1] = ddet1+dchip1+dbus+0.0025; |
| 1750 | di10b[2] = 19.344; |
| 1751 | gMC->Gsvolu("I10B", "BOX ", idtmed[254], di10b, 3); // mother volume |
| 1752 | // on layer 1 |
| 1753 | |
| 1754 | di20b[0] = 0.843; |
| 1755 | di20b[1] = ddet2+dchip2+dbus+0.0025; |
| 1756 | di20b[2] = 19.344; |
| 1757 | gMC->Gsvolu("I20B", "BOX ", idtmed[254], di20b, 3); // mother volume |
| 1758 | // layer 2 |
| 1759 | |
| 1760 | dits[0] = 1.3673; |
| 1761 | dits[1] = 0.01; |
| 1762 | dits[2] = 24; |
| 1763 | gMC->Gsvolu("I123", "BOX ", idtmed[253], dits, 3); |
| 1764 | |
| 1765 | dits[0] = 0.06; |
| 1766 | dits[1] = 0.08; |
| 1767 | dits[2] = 24; |
| 1768 | dits[3] = -36.79; |
| 1769 | dits[4] = 21.834; |
| 1770 | gMC->Gsvolu("I121", "TUBS", idtmed[253], dits, 5); |
| 1771 | |
| 1772 | dits[0] = 0.1253; |
| 1773 | dits[1] = 0.01; |
| 1774 | dits[2] = 24; |
| 1775 | gMC->Gsvolu("I122", "BOX ", idtmed[253], dits, 3); |
| 1776 | |
| 1777 | dits[0] = 0.04; |
| 1778 | dits[1] = 0.06 ; |
| 1779 | dits[2] = 24; |
| 1780 | dits[3] = 126.79; |
| 1781 | dits[4] = 270; |
| 1782 | gMC->Gsvolu("I120", "TUBS", idtmed[253], dits, 5); |
| 1783 | |
| 1784 | dits[0] = 0.1134; |
| 1785 | dits[1] = 0.01; |
| 1786 | dits[2] = 24; |
| 1787 | gMC->Gsvolu("I144", "BOX ", idtmed[253], dits, 3); |
| 1788 | |
| 1789 | dits[0] = 0.25; |
| 1790 | dits[1] = 0.06; |
| 1791 | dits[2] = 24; |
| 1792 | gMC->Gsvolu("I113", "BOX ", idtmed[254], dits, 3); |
| 1793 | |
| 1794 | dits[0] = 0.077; |
| 1795 | dits[1] = 0.01; |
| 1796 | dits[2] = 24; |
| 1797 | gMC->Gsvolu("I143", "BOX ", idtmed[253], dits, 3); |
| 1798 | |
| 1799 | dits[0] = 0.04; |
| 1800 | dits[1] = 0.06; |
| 1801 | dits[2] = 24; |
| 1802 | dits[3] = 0; |
| 1803 | dits[4] = 90; |
| 1804 | gMC->Gsvolu("I142", "TUBS", idtmed[253], dits, 5); |
| 1805 | |
| 1806 | dits[0] = 0.0695; |
| 1807 | dits[1] = 0.01; |
| 1808 | dits[2] = 24; |
| 1809 | gMC->Gsvolu("I141", "BOX ", idtmed[253], dits, 3); |
| 1810 | |
| 1811 | dits[0] = 0.06; |
| 1812 | dits[1] = 0.08; |
| 1813 | dits[2] = 24; |
| 1814 | dits[3] = 0; |
| 1815 | dits[4] = 108; |
| 1816 | gMC->Gsvolu("I140", "TUBS", idtmed[253], dits, 5); |
| 1817 | |
| 1818 | dits[0] = 0.1835; |
| 1819 | dits[1] = 0.01; |
| 1820 | dits[2] = 24; |
| 1821 | gMC->Gsvolu("I139", "BOX ", idtmed[253], dits, 3); |
| 1822 | |
| 1823 | dits[0] = 0.1894 ; |
| 1824 | dits[1] = 0.01; |
| 1825 | dits[2] = 24; |
| 1826 | gMC->Gsvolu("I138", "BOX ", idtmed[253], dits, 3); |
| 1827 | |
| 1828 | dits[0] = 0.04; |
| 1829 | dits[1] = 0.06; |
| 1830 | dits[2] = 24; |
| 1831 | dits[3] = 0; |
| 1832 | dits[4] = 75.261; |
| 1833 | gMC->Gsvolu("I137", "TUBS", idtmed[253], dits, 5); |
| 1834 | |
| 1835 | dits[0] = 1.3401; |
| 1836 | dits[1] = 0.01; |
| 1837 | dits[2] = 24; |
| 1838 | gMC->Gsvolu("I136", "BOX ", idtmed[253], dits, 3); |
| 1839 | |
| 1840 | dits[0] = 0.05; |
| 1841 | dits[1] = 0.07; |
| 1842 | dits[2] = 24; |
| 1843 | dits[3] = 0; |
| 1844 | dits[4] = 72.739; |
| 1845 | gMC->Gsvolu("I135", "TUBS", idtmed[253], dits, 5); |
| 1846 | |
| 1847 | dits[0] = 0.1193; |
| 1848 | dits[1] = 0.01; |
| 1849 | dits[2] = 24; |
| 1850 | gMC->Gsvolu("I134", "BOX ", idtmed[253], dits, 3); |
| 1851 | |
| 1852 | dits[0] = 0.163; |
| 1853 | dits[1] = 0.01; |
| 1854 | dits[2] = 24; |
| 1855 | gMC->Gsvolu("I133", "BOX ", idtmed[253], dits, 3); |
| 1856 | |
| 1857 | dits[0] = 0.04; |
| 1858 | dits[1] = 0.06; |
| 1859 | dits[2] = 24; |
| 1860 | dits[3] = 0; |
| 1861 | dits[4] = 157.633; |
| 1862 | gMC->Gsvolu("I132", "TUBS", idtmed[253], dits, 5); |
| 1863 | |
| 1864 | dits[0] = 0.2497; |
| 1865 | dits[1] = 0.01; |
| 1866 | dits[2] = 24; |
| 1867 | gMC->Gsvolu("I131", "BOX ", idtmed[253], dits, 3); |
| 1868 | |
| 1869 | dits[0] = 0.06; |
| 1870 | dits[1] = 0.08; |
| 1871 | dits[2] = 24; |
| 1872 | dits[3] = 0; |
| 1873 | dits[4] = 148.633; |
| 1874 | gMC->Gsvolu("I130", "TUBS", idtmed[253], dits, 5); |
| 1875 | |
| 1876 | dits[0] = 0.292; |
| 1877 | dits[1] = 0.01; |
| 1878 | dits[2] = 24; |
| 1879 | gMC->Gsvolu("I129", "BOX ", idtmed[253], dits, 3); |
| 1880 | |
| 1881 | dits[0] = 0.163; |
| 1882 | dits[1] = 0.01; |
| 1883 | dits[2] = 24; |
| 1884 | gMC->Gsvolu("I128", "BOX ", idtmed[253], dits, 3); |
| 1885 | |
| 1886 | dits[0] = 0.04; |
| 1887 | dits[1] = 0.06; |
| 1888 | dits[2] = 24; |
| 1889 | dits[3] = 0; |
| 1890 | dits[4] = 161.297; |
| 1891 | gMC->Gsvolu("I126", "TUBS", idtmed[253], dits, 5); |
| 1892 | |
| 1893 | dits[0] = 0.2433; |
| 1894 | dits[1] = 0.01; |
| 1895 | dits[2] = 24; |
| 1896 | gMC->Gsvolu("I125", "BOX ", idtmed[253], dits, 3); |
| 1897 | |
| 1898 | dits[0] = 0.06; |
| 1899 | dits[1] = 0.08; |
| 1900 | dits[2] = 24; |
| 1901 | dits[3] = 0; |
| 1902 | dits[4] = 42.883; |
| 1903 | gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5); |
| 1904 | |
| 1905 | dits[0] = 0.793; |
| 1906 | dits[1] = ddet1+dchip1+dbus+0.0025; |
| 1907 | dits[2] = 2.5; |
| 1908 | gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3); |
| 1909 | |
| 1910 | di107[0] = 0.793; |
| 1911 | di107[1] = ddet1+dchip1; |
| 1912 | di107[2] = 3.536; |
| 1913 | gMC->Gsvolu("I107", "BOX ", idtmed[254], di107, 3); // contains det and chip |
| 1914 | // layer 1 |
| 1915 | dits[0] = 0.705; |
| 1916 | dits[1] = 0.01; |
| 1917 | dits[2] = 2.5; |
| 1918 | gMC->Gsvolu("I109", "BOX ", idtmed[275], dits, 3); |
| 1919 | |
| 1920 | di108[0] = 0.705; |
| 1921 | di108[1] = dbus; |
| 1922 | di108[2] = 14.344; |
| 1923 | gMC->Gsvolu("I108", "BOX ", idtmed[275], di108, 3); // bus for both layers |
| 1924 | |
| 1925 | di1d7[0] = 0.7975; |
| 1926 | di1d7[1] = ddet2+dchip2; |
| 1927 | di1d7[2] = 3.536; |
| 1928 | gMC->Gsvolu("I1D7", "BOX ", idtmed[254], di1d7, 3); // contains det and chip |
| 1929 | // layer 2 |
| 1930 | dits[0] = 0.06; |
| 1931 | dits[1] = 0.08; |
| 1932 | dits[2] = 24; |
| 1933 | dits[3] = 0; |
| 1934 | dits[4] = 80; |
| 1935 | gMC->Gsvolu("I112", "TUBS", idtmed[253], dits, 5); |
| 1936 | |
| 1937 | dits[0] = 0.04; |
| 1938 | dits[1] = 0.06; |
| 1939 | dits[2] = 24; |
| 1940 | dits[3] = 0; |
| 1941 | dits[4] = 80; |
| 1942 | gMC->Gsvolu("I111", "TUBS", idtmed[253], dits, 5); |
| 1943 | |
| 1944 | dits[0] = 0.15; |
| 1945 | dits[1] = 0.0146; |
| 1946 | dits[2] = 24; |
| 1947 | gMC->Gsvolu("I118", "BOX ", idtmed[273], dits, 3); |
| 1948 | |
| 1949 | dits[0] = 0.1315; |
| 1950 | dits[1] = 0.01; |
| 1951 | dits[2] = 24; |
| 1952 | gMC->Gsvolu("I110", "BOX ", idtmed[253], dits, 3); |
| 1953 | |
| 1954 | dits[0] = 0.025; |
| 1955 | dits[1] = 0.035; |
| 1956 | dits[2] = 24; |
| 1957 | dits[3] = 0; |
| 1958 | dits[4] = 180; |
| 1959 | gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5); |
| 1960 | |
| 1961 | dits[0] = 0; |
| 1962 | dits[1] = 0.025; |
| 1963 | dits[2] = 24; |
| 1964 | dits[3] = 0; |
| 1965 | dits[4] = 180; |
| 1966 | gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5); // set freon as cooling fluid |
| 1967 | |
| 1968 | |
| 1969 | dits[0] = 0.063; |
| 1970 | dits[1] = 0.035; |
| 1971 | dits[2] = 24; |
| 1972 | gMC->Gsvolu("I116", "BOX ", idtmed[264], dits, 3); |
| 1973 | |
| 1974 | di106[0] = 0.7975; |
| 1975 | di106[1] = dchip1; |
| 1976 | di106[2] = 0.68; |
| 1977 | gMC->Gsvolu("I106", "BOX ", idtmed[201], di106, 3); // chip layer 1 |
| 1978 | |
| 1979 | di1d6[0] = 0.7975; |
| 1980 | di1d6[1] = dchip2; |
| 1981 | di1d6[2] = 0.68; |
| 1982 | gMC->Gsvolu("I1D6", "BOX ", idtmed[201], di1d6, 3); // chip layer 2 |
| 1983 | |
| 1984 | di101[0] = 0.705; |
| 1985 | di101[1] = ddet1; |
| 1986 | di101[2] = 3.536; |
| 1987 | gMC->Gsvolu("I101", "BOX ", idtmed[250], di101, 3); // contains detector |
| 1988 | // layer 1 |
| 1989 | di1d1[0] = 0.705; |
| 1990 | di1d1[1] = ddet2; |
| 1991 | di1d1[2] = 3.536; |
| 1992 | gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3); // contains detector |
| 1993 | // layer 2 |
| 1994 | |
| 1995 | |
| 1996 | dits[0] = 0.063; |
| 1997 | dits[1] = 0.025; |
| 1998 | dits[2] = 24; |
| 1999 | gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set freon as cooling fluid |
| 2000 | |
| 2001 | |
| 2002 | dits1[0] = 0.64; |
| 2003 | dits1[1] = ddet1; |
| 2004 | dits1[2] = 3.48; |
| 2005 | gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits1, 3); // detector layer 1 |
| 2006 | |
| 2007 | dits2[0] = 0.64; |
| 2008 | dits2[1] = ddet2; |
| 2009 | dits2[2] = 3.48; |
| 2010 | gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits2, 3); // detector layer 2 |
| 2011 | |
| 2012 | dits[0] = 3.701; |
| 2013 | dits[1] = 7.699; |
| 2014 | dits[2] = 4; |
| 2015 | dits[3] = 57.1; |
| 2016 | dits[4] = 99.9; |
| 2017 | gMC->Gsvolu("I650", "TUBS", idtmed[254], dits, 5); // was I150 in old geom. |
| 2018 | |
| 2019 | dits[0] = 3.7; |
| 2020 | dits[1] = 7.75; |
| 2021 | dits[2] = 0.05; |
| 2022 | gMC->Gsvolu("I651", "TUBE", idtmed[296], dits, 3); // services disk |
| 2023 | |
| 2024 | dits[0] = 0; |
| 2025 | dits[1] = 0.5; |
| 2026 | dits[2] = 1.5; |
| 2027 | gMC->Gsvolu("I676", "TUBE", idtmed[274], dits, 3); // was I176 in old geom. |
| 2028 | |
| 2029 | dits[0] = 0; |
| 2030 | dits[1] = 0.18; |
| 2031 | dits[2] = 0.8; |
| 2032 | gMC->Gsvolu("I673", "TUBE", idtmed[274], dits, 3); // was I173 in old geom. |
| 2033 | |
| 2034 | dits[0] = 0; |
| 2035 | dits[1] = 0.18; |
| 2036 | dits[2] = 3; |
| 2037 | gMC->Gsvolu("I671", "TUBE", idtmed[274], dits, 3); // was I171 in old geom. |
| 2038 | |
| 2039 | dits[0] = 0; |
| 2040 | dits[1] = 0.075; |
| 2041 | dits[2] = 0.8; |
| 2042 | gMC->Gsvolu("I669", "TUBE", idtmed[264], dits, 3); // was I169 in old geom. |
| 2043 | |
| 2044 | dits[0] = 3.5; |
| 2045 | dits[1] = 5.6; |
| 2046 | dits[2] = 0.55; |
| 2047 | dits[3] = 0; |
| 2048 | dits[4] = 38; |
| 2049 | gMC->Gsvolu("I667", "TUBS", idtmed[263], dits, 5); // was I167 in old geom. |
| 2050 | |
| 2051 | dits[0] = 6.6; |
| 2052 | dits[1] = 7.6; |
| 2053 | dits[2] = 0.5; |
| 2054 | dits[3] = 0; |
| 2055 | dits[4] = 9; |
| 2056 | gMC->Gsvolu("I666", "TUBS", idtmed[263], dits, 5); // was I166 in old geom. |
| 2057 | |
| 2058 | dits[0] = 0.26; |
| 2059 | dits[1] = 0.32; |
| 2060 | dits[2] = 0.55; |
| 2061 | gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom. |
| 2062 | |
| 2063 | dits[0] = 0; |
| 2064 | dits[1] = 0.3; |
| 2065 | dits[2] = 1.5; |
| 2066 | gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid |
| 2067 | // was I177 in old geom. |
| 2068 | |
| 2069 | dits[0] = 0.07; |
| 2070 | dits[1] = 0.125; |
| 2071 | dits[2] = 0.3; |
| 2072 | gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom. |
| 2073 | |
| 2074 | |
| 2075 | dits[0] = 0; |
| 2076 | dits[1] = 0.1; |
| 2077 | dits[2] = 0.8; |
| 2078 | gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid |
| 2079 | // was I174 in old geom. |
| 2080 | |
| 2081 | |
| 2082 | |
| 2083 | dits[0] = 0; |
| 2084 | dits[1] = 0.1; |
| 2085 | dits[2] = 3; |
| 2086 | gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid |
| 2087 | // was I172 in old geom. |
| 2088 | |
| 2089 | |
| 2090 | dits[0] = 0; |
| 2091 | dits[1] = 0.0746; |
| 2092 | dits[2] = 0.8; |
| 2093 | gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid |
| 2094 | // was I170 in old geom. |
| 2095 | |
| 2096 | dits[0] = 3.7; |
| 2097 | dits[1] = 5.4; |
| 2098 | dits[2] = 0.35; |
| 2099 | dits[3] = 2; |
| 2100 | dits[4] = 36; |
| 2101 | gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); //set freon as cooling fluid |
| 2102 | // was I168 in old geom. |
| 2103 | |
| 2104 | } |
| 2105 | |
| 2106 | // --- Define SDD volumes ------------------------------------------ |
| 2107 | |
| 108bd0fe |
2108 | cos30 = cos(30.*3.14159/180.); |
| 2109 | sin30 = sin(30.*3.14159/180.); |
| 2110 | |
| 2111 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 2112 | |
| 2113 | Double_t maxRadius = 28.5; |
| 2114 | dits[0] = 0; |
| 2115 | dits[1] = 360; |
| 2116 | dits[2] = 6; |
| 2117 | dits[3] = -34.6; |
| 2118 | dits[4] = 23.49; |
| 2119 | dits[5] = maxRadius; |
| 2120 | dits[6] = -27.35; |
| 2121 | dits[7] = 23.49; |
| 2122 | dits[8] = maxRadius; |
| 2123 | dits[9] = -27.35; |
| 2124 | dits[10] = 14.59; |
| 2125 | dits[11] = maxRadius; |
| 2126 | dits[12] = 27.35; |
| 2127 | dits[13] = 14.59; |
| 2128 | dits[14] = maxRadius; |
| 2129 | dits[15] = 27.35; |
| 2130 | dits[16] = 23.49; |
| 2131 | dits[17] = maxRadius; |
| 2132 | dits[18] = 34.6; |
| 2133 | dits[19] = 23.49; |
| 2134 | dits[20] = maxRadius; |
| 2135 | gMC->Gsvolu("IT34", "PCON", idtmed[209], dits, 21); |
| 2136 | |
| 2137 | // block of the SDD electronics and related ladder frame |
| 2138 | iI018dits[0] = 3.2; |
| 2139 | iI018dits[1] = 2; |
| 2140 | iI018dits[2] = 3.65; |
| 2141 | gMC->Gsvolu("I018", "BOX ", idtmed[209], iI018dits, 3); |
| 2142 | |
| 2143 | // block of the SDD end ladder |
| 2144 | iI024dits[0] = 3.2; |
| 2145 | iI024dits[1] = 2; |
| 2146 | iI024dits[2] = 2.725; |
| 2147 | gMC->Gsvolu("I024", "BOX ", idtmed[209], iI024dits, 3); |
| 2148 | |
| 2149 | // ladder frame of layer 3 - F.T. March,7-2001 |
| 2150 | iI047dits[0] = iI018dits[0]; |
| 2151 | iI047dits[1] = iI018dits[1]; |
| 2152 | iI047dits[2] = 6*iI018dits[2] + 2*iI024dits[2]; |
| 2153 | gMC->Gsvolu("I047", "BOX ", idtmed[209], iI047dits, 3); |
| 2154 | |
| 2155 | // ladder frame of layer 4 - F.T. March,7-2001 |
| 2156 | iI048dits[0] = iI018dits[0]; |
| 2157 | iI048dits[1] = iI018dits[1]; |
| 2158 | iI048dits[2] = 8*iI018dits[2] + 2*iI024dits[2]; |
| 2159 | gMC->Gsvolu("I048", "BOX ", idtmed[209], iI048dits, 3); |
| 2160 | |
| 2161 | |
| 2162 | // global SDD volume (sensitive + insensitive) |
| 2163 | iI302dits[0] = 3.6250; |
| 2164 | iI302dits[1] = 0.0150; |
| 2165 | iI302dits[2] = 4.3794; |
| 2166 | gMC->Gsvolu("I302", "BOX ", idtmed[278], iI302dits, 3); |
| 2167 | |
| 2168 | // Like for I302 - F.T. March,7-2001 |
| 2169 | iI402dits[0] = 3.6250; |
| 2170 | iI402dits[1] = 0.0150; |
| 2171 | iI402dits[2] = 4.3794; |
| 2172 | gMC->Gsvolu("I402", "BOX ", idtmed[278], iI402dits, 3); |
| 2173 | |
| 2174 | // SDD ladder of layer 3 - F.T. March,7-2001 |
| 2175 | iI004dits[0] = iI302dits[0]+0.005; |
| 2176 | iI004dits[1] = 2*iI302dits[1]+ySDDsep/2.; |
| 2177 | iI004dits[2] = TMath::Abs(zSDDlay3[0]); |
| 2178 | if (iI004dits[2] < TMath::Abs(zSDDlay3[5])) { |
| 2179 | iI004dits[2] = TMath::Abs(zSDDlay3[5]); |
| 2180 | } |
| 2181 | iI004dits[2] = iI004dits[2] + iI302dits[2]; |
| 2182 | gMC->Gsvolu("I004", "BOX ", idtmed[209], iI004dits, 3); |
| 2183 | |
| 2184 | // SDD ladder of layer 4 - F.T. March,7-2001 |
| 2185 | iI005dits[0] = iI402dits[0]+0.005; |
| 2186 | iI005dits[1] = 2*iI402dits[1]+ySDDsep/2.; |
| 2187 | iI005dits[2] = TMath::Abs(zSDDlay4[0]); |
| 2188 | if (iI005dits[2] < TMath::Abs(zSDDlay4[7])) { |
| 2189 | iI005dits[2] = TMath::Abs(zSDDlay4[7]); |
| 2190 | } |
| 2191 | iI005dits[2] = iI005dits[2] + iI402dits[2]; |
| 2192 | gMC->Gsvolu("I005", "BOX ", idtmed[209], iI005dits, 3); |
| 2193 | |
| 2194 | |
| 2195 | // -- block of the SDD ladder foot and end ladder |
| 2196 | |
| 2197 | // ladder foot mother volume |
| 2198 | iI028dits[0] = 3.0000; |
| 2199 | iI028dits[1] = 0.4000; |
| 2200 | iI028dits[2] = 0.9000; |
| 2201 | gMC->Gsvolu("I028", "BOX ", idtmed[224], iI028dits, 3); |
| 2202 | |
| 2203 | // positioning-box #1 at SDD end-ladder - F.T. March,7-2001 |
| 2204 | iI420dits[0] = 0.4500; |
| 2205 | iI420dits[1] = 0.4000; |
| 2206 | iI420dits[2] = 0.4500; |
| 2207 | gMC->Gsvolu("I420", "BOX ", idtmed[264], iI420dits, 3); |
| 2208 | |
| 2209 | // positioning-box #2 at SDD end-ladder - F.T. March,7-2001 |
| 2210 | iI421dits[0] = 0.; |
| 2211 | iI421dits[1] = 0.25; |
| 2212 | iI421dits[2] = iI420dits[1]; |
| 2213 | gMC->Gsvolu("I421", "TUBE", idtmed[209], iI421dits, 3); |
| 2214 | |
| 2215 | // reference ruby-sphere at SDD end-ladder - F.T. March,7-2001 |
| 2216 | iI422dits[0] = 0.0000; |
| 2217 | iI422dits[1] = 0.2000; |
| 2218 | iI422dits[2] = 0.0000; |
| 2219 | iI422dits[3] = 180.00; |
| 2220 | iI422dits[4] = 0.0000; |
| 2221 | iI422dits[5] = 360.00; |
| 2222 | gMC->Gsvolu("I422", "SPHE", idtmed[277], iI422dits, 6); |
| 2223 | |
| 2224 | // support for ruby-sphere (I422) - F.T. March,7-2001 |
| 2225 | iI423dits[0] = 0.0000; |
| 2226 | iI423dits[1] = 0.1000; |
| 2227 | iI423dits[2] = (iI420dits[1]-iI422dits[1])/2.; |
| 2228 | gMC->Gsvolu("I423", "TUBE", idtmed[264], iI423dits, 3); |
| 2229 | |
| 2230 | // passage for HV microcables - F.T. March,7-2001 |
| 2231 | iI424dits[0] = 1.5000; |
| 2232 | iI424dits[1] = 0.1500; |
| 2233 | iI424dits[2] = iI421dits[2]; |
| 2234 | gMC->Gsvolu("I424", "BOX ", idtmed[209], iI424dits, 3); |
| 2235 | |
| 2236 | // HV microcables segment at the end ladder - F.T. March,7-2001 |
| 2237 | iI425dits[0] = 1.350000; |
| 2238 | iI425dits[1] = 0.015250; |
| 2239 | iI425dits[2] = iI024dits[2]; |
| 2240 | gMC->Gsvolu("I425", "BOX ", idtmed[279], iI425dits, 3); |
| 2241 | |
| 2242 | // lower edge of SDD ladder frame at end-ladder - part 1 |
| 2243 | dits[0] = 0.2; |
| 2244 | dits[1] = 0.1815; |
| 2245 | dits[2] = iI024dits[2]; |
| 2246 | dits[3] = 0.015; |
| 2247 | gMC->Gsvolu("I025", "TRD1", idtmed[208], dits, 4); |
| 2248 | |
| 2249 | // lower edge of SDD ladder frame at end-ladder - part 2 |
| 2250 | dits[0] = 0.183; |
| 2251 | dits[1] = 0.165; |
| 2252 | dits[2] = iI024dits[2]; |
| 2253 | dits[3] = 0.015; |
| 2254 | gMC->Gsvolu("I026", "TRD1", idtmed[208], dits, 4); |
| 2255 | |
| 2256 | // new: for the 1st top rod of the structure |
| 2257 | // at the end-ladder - F.T. March,7-2001 |
| 2258 | iI029dits[0] = 0.2; |
| 2259 | iI029dits[1] = 0.1815; |
| 2260 | iI029dits[2] = 1.0100; |
| 2261 | iI029dits[3] = 0.015; |
| 2262 | gMC->Gsvolu("I029", "TRD1", idtmed[208], iI029dits, 4); |
| 2263 | |
| 2264 | // new: for the 2nd top rod of the structure |
| 2265 | // at the end-ladder - F.T. March,7-2001 |
| 2266 | iI030dits[0] = 0.1830; |
| 2267 | iI030dits[1] = 0.1650; |
| 2268 | iI030dits[2] = 1.0100; |
| 2269 | iI030dits[3] = 0.0150; |
| 2270 | gMC->Gsvolu("I030", "TRD1", idtmed[208], iI030dits, 4); |
| 2271 | |
| 2272 | // inox cooling tubes for the end ladder - F.T. March,7-2001 |
| 2273 | iI031dits[0] = 0.093; |
| 2274 | iI031dits[1] = 0.1; |
| 2275 | iI031dits[2] = iI024dits[2]; |
| 2276 | gMC->Gsvolu("I031", "TUBE", idtmed[264], iI031dits, 3); |
| 2277 | |
| 2278 | if (fluid == 1) { |
| 2279 | // cooling water for the end ladder - F.T. March,7-2001 |
| 2280 | iI032dits[0] = 0; |
| 2281 | iI032dits[1] = iI031dits[0]; |
| 2282 | iI032dits[2] = iI024dits[2]; |
| 2283 | gMC->Gsvolu("I032", "TUBE", idtmed[211], iI032dits, 3); |
| 2284 | } else { |
| 2285 | // cooling freon for the end ladder - R.B. March,21-2001 |
| 2286 | iI032dits[0] = 0; |
| 2287 | iI032dits[1] = iI031dits[0]; |
| 2288 | iI032dits[2] = iI024dits[2]; |
| 2289 | gMC->Gsvolu("I032", "TUBE", idtmed[212], iI032dits, 3); |
| 2290 | } |
| 2291 | |
| 2292 | // -- block of the SDD ladder frame holding the electronics |
| 2293 | |
| 2294 | // edge of the ladder frame - part 1 |
| 2295 | dits[0] = 0.2; |
| 2296 | dits[1] = 0.182; |
| 2297 | dits[2] = 3.65; |
| 2298 | dits[3] = 0.015; |
| 2299 | gMC->Gsvolu("I019", "TRD1", idtmed[208], dits, 4); |
| 2300 | |
| 2301 | // edge of the ladder frame - part 2 |
| 2302 | dits[0] = 0.183; |
| 2303 | dits[1] = 0.165; |
| 2304 | dits[2] = 3.65; |
| 2305 | dits[3] = 0.015; |
| 2306 | gMC->Gsvolu("I020", "TRD1", idtmed[208], dits, 4); |
| 2307 | |
| 2308 | // inclined segments of the ladder frame |
| 2309 | dits[0] = 2.23; |
| 2310 | dits[1] = 2.1; |
| 2311 | dits[2] = 0.05; |
| 2312 | dits[3] = 0.03; |
| 2313 | gMC->Gsvolu("I021", "TRD1", idtmed[208], dits, 4); |
| 2314 | |
| 2315 | // horiz.segments of the ladders, normal to ladder edges |
| 2316 | dits[0] = 2.1; |
| 2317 | dits[1] = 2; |
| 2318 | dits[2] = 0.06; |
| 2319 | dits[3] = 0.04; |
| 2320 | gMC->Gsvolu("I022", "TRD1", idtmed[208], dits, 4); |
| 2321 | |
| 2322 | // horiz.segments of the ladders, at 45 deg. to ladder edges |
| 2323 | dits[0] = 2.615; |
| 2324 | dits[1] = 2.465; |
| 2325 | dits[2] = 0.06; |
| 2326 | dits[3] = 0.04; |
| 2327 | gMC->Gsvolu("I023", "TRD1", idtmed[208], dits, 4); |
| 2328 | |
| 2329 | // supports of the ceramic pins holding the detectors |
| 2330 | dits[0] = 0.3; |
| 2331 | dits[1] = 0.05; |
| 2332 | dits[2] = 0.15; |
| 2333 | gMC->Gsvolu("I033", "BOX ", idtmed[208], dits, 3); |
| 2334 | |
| 2335 | // ceramic pins holding the detectors |
| 2336 | dits[0] = 0; |
| 2337 | dits[1] = 0.05; |
| 2338 | dits[2] = 0.225; |
| 2339 | gMC->Gsvolu("I034", "TUBE", idtmed[277], dits, 3); |
| 2340 | |
| 2341 | // holders of cooling tubes |
| 2342 | iI035dits[0] = 0.1; |
| 2343 | iI035dits[1] = 0.15; |
| 2344 | iI035dits[2] = 0.2; |
| 2345 | gMC->Gsvolu("I035", "TUBE", idtmed[208], iI035dits, 3); |
| 2346 | |
| 2347 | // top holders of microcables |
| 2348 | dits[0] = 0.2; |
| 2349 | dits[1] = 0.01; |
| 2350 | dits[2] = 0.05; |
| 2351 | gMC->Gsvolu("I036", "BOX ", idtmed[208], dits, 3); |
| 2352 | |
| 2353 | // inox cooling tubes - F.T. March,7-2001 |
| 2354 | iI037dits[0] = 0.093; |
| 2355 | iI037dits[1] = 0.1; |
| 2356 | iI037dits[2] = iI018dits[2]; |
| 2357 | gMC->Gsvolu("I037", "TUBE", idtmed[264], iI037dits, 3); |
| 2358 | |
| 2359 | if (fluid == 1) { |
| 2360 | // cooling water - F.T. March,7-2001 |
| 2361 | iI038dits[0] = 0; |
| 2362 | iI038dits[1] = iI037dits[0]; |
| 2363 | iI038dits[2] = iI018dits[2]; |
| 2364 | gMC->Gsvolu("I038", "TUBE", idtmed[211], iI038dits, 3); |
| 2365 | } else { |
| 2366 | // cooling freon - R.B. March,21-2001 |
| 2367 | iI038dits[0] = 0; |
| 2368 | iI038dits[1] = iI037dits[0]; |
| 2369 | iI038dits[2] = iI018dits[2]; |
| 2370 | gMC->Gsvolu("I038", "TUBE", idtmed[212], iI038dits, 3); |
| 2371 | } |
| 2372 | // -- block of the SDD electronics (heat bridge, chips, hybrid, anode microcable) |
| 2373 | |
| 2374 | // SDD heat bridge - F.T. March,7-2001 |
| 2375 | iI039dits[0] = 1.1000; |
| 2376 | iI039dits[1] = 0.0087; |
| 2377 | iI039dits[2] = 3.2500; |
| 2378 | gMC->Gsvolu("I039", "BOX ", idtmed[268], iI039dits, 3); |
| 2379 | |
| 2380 | // SDD clip part 1 |
| 2381 | dits[0] = 0.25; |
| 2382 | dits[1] = 0.01; |
| 2383 | dits[2] = iI039dits[2]; |
| 2384 | gMC->Gsvolu("I040", "BOX ", idtmed[268], dits, 3); |
| 2385 | |
| 2386 | // SDD clip part 2 |
| 2387 | iI041dits[0] = 0.1; |
| 2388 | iI041dits[1] = 0.12; |
| 2389 | iI041dits[2] = iI039dits[2]; |
| 2390 | iI041dits[3] = 90; |
| 2391 | iI041dits[4] = 320; |
| 2392 | gMC->Gsvolu("I041", "TUBS", idtmed[268], iI041dits, 5); |
| 2393 | |
| 2394 | |
| 2395 | // SDD PASCAL - F.T. March,7-2001 |
| 2396 | iI042dits[0] = 0.5000; |
| 2397 | iI042dits[1] = 0.0175; |
| 2398 | iI042dits[2] = 0.5000; |
| 2399 | gMC->Gsvolu("I042", "BOX ", idtmed[206], iI042dits, 3); |
| 2400 | |
| 2401 | // SDD AMBRA - F.T. March,7-2001 |
| 2402 | iI043dits[0] = 0.3500; |
| 2403 | iI043dits[1] = 0.0175; |
| 2404 | iI043dits[2] = 0.5000; |
| 2405 | gMC->Gsvolu("I043", "BOX ", idtmed[206], iI043dits, 3); |
| 2406 | |
| 2407 | // SDD capacitors - F.T. March,7-2001 |
| 2408 | iI051dits[0] = 0.1400; |
| 2409 | iI051dits[1] = 0.0350; |
| 2410 | iI051dits[2] = 0.0625; |
| 2411 | gMC->Gsvolu("I051", "BOX ", idtmed[276], iI051dits, 3); |
| 2412 | |
| 2413 | // SDD hybrid circuit - F.T. March,7-2001 |
| 2414 | iI052dits[0] = 1.725000; |
| 2415 | iI052dits[1] = 0.003743; |
| 2416 | iI052dits[2] = iI039dits[2]; |
| 2417 | gMC->Gsvolu("I052", "BOX ", idtmed[281], iI052dits, 3); |
| 2418 | |
| 2419 | // SDD anode microcable : changed - F.T. March,7-2001 |
| 2420 | iI044dits[0] = iI018dits[2]; |
| 2421 | iI044dits[1] = iI039dits[2]; |
| 2422 | iI044dits[2] = 0.00084; |
| 2423 | iI044dits[3] = (15.189149/(iI044dits[0]+iI044dits[1]))/2; |
| 2424 | gMC->Gsvolu("I044", "TRD1", idtmed[282], iI044dits, 4); |
| 2425 | volI044 = ((2*iI044dits[0] + 2*iI044dits[1]) * 2*iI044dits[2])/2 * 2*iI044dits[3]; |
| 2426 | |
| 2427 | // SDD electronics box - F.T. March,7-2001 |
| 2428 | iI050dits[1] = iI039dits[1]+iI052dits[1]+iI051dits[1]+iI044dits[2]; |
| 2429 | iI050dits[0] = iI018dits[1]/cos(30.*3.14159/180.)-iI050dits[1]*sin(30.*3.14159/180.); |
| 2430 | iI050dits[2] = iI018dits[2]; |
| 2431 | gMC->Gsvolu("I050", "BOX ", idtmed[209], iI050dits, 3); |
| 2432 | |
| 2433 | // SDD sensitive volume |
| 2434 | dits[0] = 3.50850; |
| 2435 | dits[1] = 0.01499; // not 0.015 because it is included into I302 which is 0.015 |
| 2436 | dits[2] = 3.76320; |
| 2437 | gMC->Gsvolu("ITS3", "BOX ", idtmed[200], dits, 3); |
| 2438 | |
| 2439 | // Like for ITS3 - F.T. March,7-2001 |
| 2440 | dits[0] = 3.50850; |
| 2441 | dits[1] = 0.01499; // not 0.015 because it is included into I402 which is 0.015 |
| 2442 | dits[2] = 3.76320; |
| 2443 | gMC->Gsvolu("ITS4", "BOX ", idtmed[200], dits, 3); |
| 2444 | } |
| 2445 | |
| 2446 | // --- Define SSD volumes ------------------------------------------ |
| 2447 | |
| 2448 | if (! AliITSInitGeometry::SSDIsTGeoNative()) { |
| 2449 | dits[0] = 0; |
| 2450 | dits[1] = 360; |
| 2451 | dits[2] = 6; |
| 2452 | dits[3] = -57.45; |
| 2453 | dits[4] = 43.6; |
| 2454 | dits[5] = 48; |
| 2455 | dits[6] = -49.15; |
| 2456 | dits[7] = 43.6; |
| 2457 | dits[8] = 48; |
| 2458 | dits[9] = -49.15; |
| 2459 | dits[10] = 36.9; |
| 2460 | dits[11] = 48; |
| 2461 | dits[12] = 50.55; |
| 2462 | dits[13] = 36.9; |
| 2463 | dits[14] = 48; |
| 2464 | dits[15] = 50.55; |
| 2465 | dits[16] = 43.6; |
| 2466 | dits[17] = 48; |
| 2467 | dits[18] = 57.45; |
| 2468 | dits[19] = 43.6; |
| 2469 | dits[20] = 48; |
| 2470 | //gMC->Gsvolu("IT56", "PCON", idtmed[220], dits, 21); // SSD air |
| 2471 | gMC->Gsvolu("IT56", "PCON", idtmed[204], dits, 21); // air |
| 2472 | |
| 2473 | dits[0] = 3.4; |
| 2474 | dits[1] = 1.955; |
| 2475 | dits[2] = 56.5; |
| 2476 | gMC->Gsvolu("I570", "BOX ", idtmed[204], dits, 3); |
| 2477 | |
| 2478 | dits[0] = 3.75; |
| 2479 | dits[1] = 0.045; |
| 2480 | dits[2] = 50.975; |
| 2481 | gMC->Gsvolu("I569", "BOX ", idtmed[204], dits, 3); |
| 2482 | |
| 2483 | dits[0] = 3.4; |
| 2484 | dits[1] = 1.955; |
| 2485 | dits[2] = 47; |
| 2486 | gMC->Gsvolu("I571", "BOX ", idtmed[204], dits, 3); |
| 2487 | |
| 2488 | dits[0] = 3.75; |
| 2489 | dits[1] = 0.045; |
| 2490 | dits[2] = 43.3; |
| 2491 | gMC->Gsvolu("I565", "BOX ", idtmed[204], dits, 3); |
| 2492 | |
| 2493 | dits[0] = 3.4; |
| 2494 | dits[1] = 1.955; |
| 2495 | dits[2] = 3.15; |
| 2496 | gMC->Gsvolu("I553", "BOX ", idtmed[204], dits, 3); |
| 2497 | |
| 2498 | dits[0] = 3.405; |
| 2499 | dits[1] = 1.955; |
| 2500 | dits[2] = 1.955; |
| 2501 | gMC->Gsvolu("I523", "BOX ", idtmed[204], dits, 3); |
| 2502 | |
| 2503 | dits[0] = 3.75; |
| 2504 | dits[1] = 0.015; |
| 2505 | dits[2] = 2.1; |
| 2506 | gMC->Gsvolu("I566", "BOX ", idtmed[206], dits, 3); |
| 2507 | |
| 2508 | dits[0] = 3.4; |
| 2509 | dits[1] = 1.955; |
| 2510 | dits[2] = 3.15; |
| 2511 | gMC->Gsvolu("I544", "BOX ", idtmed[204], dits, 3); |
| 2512 | |
| 2513 | dits[0] = 3.41; |
| 2514 | dits[1] = 1.955; |
| 2515 | dits[2] = 1.955; |
| 2516 | gMC->Gsvolu("I516", "BOX ", idtmed[204], dits, 3); |
| 2517 | |
| 2518 | dits[0] = 3.75; |
| 2519 | dits[1] = 0.015; |
| 2520 | dits[2] = 2.1; |
| 2521 | gMC->Gsvolu("I562", "BOX ", idtmed[206], dits, 3); |
| 2522 | |
| 2523 | if (fluid == 1) { |
| 2524 | dits[0] = 0; |
| 2525 | dits[1] = 0.07; |
| 2526 | dits[2] = 3.15; |
| 2527 | gMC->Gsvolu("I559", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid |
| 2528 | } else { |
| 2529 | dits[0] = 0; |
| 2530 | dits[1] = 0.07; |
| 2531 | dits[2] = 3.15; |
| 2532 | gMC->Gsvolu("I559", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid |
| 2533 | } |
| 2534 | |
| 2535 | dits[0] = 0.07; |
| 2536 | dits[1] = 0.1; |
| 2537 | dits[2] = 3.15; |
| 2538 | gMC->Gsvolu("I560", "TUBE", idtmed[210], dits, 3); |
| 2539 | |
| 2540 | dits[0] = 0.225; |
| 2541 | dits[1] = 0.195; |
| 2542 | dits[2] = 3.15; |
| 2543 | dits[3] = 0.025; |
| 2544 | gMC->Gsvolu("I558", "TRD1", idtmed[203], dits, 4); |
| 2545 | |
| 2546 | dits[0] = 0.25; |
| 2547 | dits[1] = 0.22; |
| 2548 | dits[2] = 3.15; |
| 2549 | dits[3] = 0.025; |
| 2550 | gMC->Gsvolu("I557", "TRD1", idtmed[203], dits, 4); |
| 2551 | |
| 2552 | dits[0] = 2.17; |
| 2553 | dits[1] = 0.035; |
| 2554 | dits[2] = 0.05; |
| 2555 | gMC->Gsvolu("I556", "BOX ", idtmed[203], dits, 3); |
| 2556 | |
| 2557 | dits[0] = 2 ; |
| 2558 | dits[1] = 0.035; |
| 2559 | dits[2] = 0.05; |
| 2560 | gMC->Gsvolu("I554", "BOX ", idtmed[203], dits, 3); |
| 2561 | |
| 2562 | dits[0] = 2.675; |
| 2563 | dits[1] = 0.035; |
| 2564 | dits[2] = 0.05; |
| 2565 | gMC->Gsvolu("I555", "BOX ", idtmed[203], dits, 3); |
| 2566 | |
| 2567 | dits[0] = 0.3; |
| 2568 | dits[1] = 0.15; |
| 2569 | dits[2] = 0.15; |
| 2570 | gMC->Gsvolu("I561", "BOX ", idtmed[203], dits, 3); |
| 2571 | |
| 2572 | dits[0] = 0.025; |
| 2573 | dits[1] = 0.025; |
| 2574 | dits[2] = 0.05; |
| 2575 | gMC->Gsvolu("I519", "BOX ", idtmed[214], dits, 3); |
| 2576 | |
| 2577 | dits[0] = 0.304; |
| 2578 | dits[1] = 0.0275; |
| 2579 | dits[2] = 0.432; |
| 2580 | gMC->Gsvolu("I521", "BOX ", idtmed[206], dits, 3); |
| 2581 | |
| 2582 | dits[0] = 0.16; |
| 2583 | dits[1] = 0.08; |
| 2584 | dits[2] = 0.08; |
| 2585 | gMC->Gsvolu("I520", "BOX ", idtmed[214], dits, 3); |
| 2586 | |
| 2587 | dits[0] = 3.4; |
| 2588 | dits[1] = 0.015; |
| 2589 | dits[2] = 0.525; |
| 2590 | gMC->Gsvolu("I518", "BOX ", idtmed[203], dits, 3); |
| 2591 | |
| 2592 | dits[0] = 0.15; |
| 2593 | dits[1] = 0.105; |
| 2594 | dits[2] = 0.29; |
| 2595 | dits[3] = 0.08; |
| 2596 | gMC->Gsvolu("I522", "TRD1", idtmed[203], dits, 4); |
| 2597 | |
| 2598 | dits[0] = 0.07; |
| 2599 | dits[1] = 0.1; |
| 2600 | dits[2] = 1.955; |
| 2601 | gMC->Gsvolu("I542", "TUBE", idtmed[210], dits, 3); |
| 2602 | |
| 2603 | if (fluid == 1) { |
| 2604 | dits[0] = 0; |
| 2605 | dits[1] = 0.07; |
| 2606 | dits[2] = 1.955; |
| 2607 | gMC->Gsvolu("I541", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid |
| 2608 | } else { |
| 2609 | dits[0] = 0; |
| 2610 | dits[1] = 0.07; |
| 2611 | dits[2] = 1.955; |
| 2612 | gMC->Gsvolu("I541", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid |
| 2613 | } |
| 2614 | |
| 2615 | dits[0] = 0.3; |
| 2616 | dits[1] = 0.15; |
| 2617 | dits[2] = 0.15; |
| 2618 | gMC->Gsvolu("I543", "BOX ", idtmed[203], dits, 3); |
| 2619 | |
| 2620 | dits[0] = 0.25; |
| 2621 | dits[1] = 0.22; |
| 2622 | dits[2] = 1.955; |
| 2623 | dits[3] = 0.025; |
| 2624 | gMC->Gsvolu("I537", "TRD1", idtmed[203], dits, 4); |
| 2625 | |
| 2626 | dits[0] = 0.225; |
| 2627 | dits[1] = 0.195; |
| 2628 | dits[2] = 1.955; |
| 2629 | dits[4] = 0.025; |
| 2630 | gMC->Gsvolu("I538", "TRD1", idtmed[203], dits, 4); |
| 2631 | |
| 2632 | dits[0] = 2.17; |
| 2633 | dits[1] = 0.035; |
| 2634 | dits[2] = 0.05; |
| 2635 | gMC->Gsvolu("I536", "BOX ", idtmed[203], dits, 3); |
| 2636 | |
| 2637 | dits[0] = 2.675; |
| 2638 | dits[1] = 0.035; |
| 2639 | dits[2] = 0.05; |
| 2640 | gMC->Gsvolu("I535", "BOX ", idtmed[203], dits, 3); |
| 2641 | |
| 2642 | dits[0] = 2; |
| 2643 | dits[1] = 0.035; |
| 2644 | dits[2] = 0.05; |
| 2645 | gMC->Gsvolu("I534", "BOX ", idtmed[203], dits, 3); |
| 2646 | |
| 2647 | dits[0] = 0; |
| 2648 | dits[1] = 0.05; |
| 2649 | dits[2] = 0.17; |
| 2650 | gMC->Gsvolu("I540", "TUBE", idtmed[203], dits, 3); |
| 2651 | |
| 2652 | dits[0] = 0; |
| 2653 | dits[1] = 0.05; |
| 2654 | dits[2] = 0.205; |
| 2655 | gMC->Gsvolu("I539", "TUBE", idtmed[203], dits, 3); |
| 2656 | |
| 2657 | dits[0] = 3.65; |
| 2658 | dits[1] = 0.015; |
| 2659 | dits[2] = 2; |
| 2660 | gMC->Gsvolu("ITS6", "BOX ", idtmed[200], dits, 3); |
| 2661 | |
| 2662 | if (fluid == 1) { |
| 2663 | dits[0] = 0; |
| 2664 | dits[1] = 0.07; |
| 2665 | dits[2] = 3.15; |
| 2666 | gMC->Gsvolu("I550", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid |
| 2667 | } else { |
| 2668 | dits[0] = 0; |
| 2669 | dits[1] = 0.07; |
| 2670 | dits[2] = 3.15; |
| 2671 | gMC->Gsvolu("I550", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid |
| 2672 | } |
| 2673 | |
| 2674 | dits[0] = 0.07; |
| 2675 | dits[1] = 0.1; |
| 2676 | dits[2] = 3.15; |
| 2677 | gMC->Gsvolu("I551", "TUBE", idtmed[210], dits, 3); |
| 2678 | |
| 2679 | dits[0] = 0.225; |
| 2680 | dits[1] = 0.195; |
| 2681 | dits[2] = 3.15; |
| 2682 | dits[3] = 0.025; |
| 2683 | gMC->Gsvolu("I549", "TRD1", idtmed[203], dits, 4); |
| 2684 | |
| 2685 | dits[0] = 0.25; |
| 2686 | dits[1] = 0.22; |
| 2687 | dits[2] = 3.15; |
| 2688 | dits[3] = 0.025; |
| 2689 | gMC->Gsvolu("I548", "TRD1", idtmed[203], dits, 4); |
| 2690 | |
| 2691 | dits[0] = 2.17; |
| 2692 | dits[1] = 0.035; |
| 2693 | dits[2] = 0.05; |
| 2694 | gMC->Gsvolu("I547", "BOX ", idtmed[203], dits, 3); |
| 2695 | |
| 2696 | dits[0] = 2; |
| 2697 | dits[1] = 0.035; |
| 2698 | dits[2] = 0.05; |
| 2699 | gMC->Gsvolu("I545", "BOX ", idtmed[203], dits, 3); |
| 2700 | |
| 2701 | dits[0] = 2.675; |
| 2702 | dits[1] = 0.035; |
| 2703 | dits[2] = 0.05; |
| 2704 | gMC->Gsvolu("I546", "BOX ", idtmed[203], dits, 3); |
| 2705 | |
| 2706 | dits[0] = 0.3; |
| 2707 | dits[1] = 0.15; |
| 2708 | dits[2] = 0.15; |
| 2709 | gMC->Gsvolu("I552", "BOX ", idtmed[203], dits, 3); |
| 2710 | |
| 2711 | dits[0] = 0.304; |
| 2712 | dits[1] = 0.0275; |
| 2713 | dits[2] = 0.4322; |
| 2714 | gMC->Gsvolu("I515", "BOX ", idtmed[206], dits, 3); |
| 2715 | |
| 2716 | dits[0] = 0.025; |
| 2717 | dits[1] = 0.025; |
| 2718 | dits[2] = 0.05; |
| 2719 | gMC->Gsvolu("I513", "BOX ", idtmed[214], dits, 3); |
| 2720 | |
| 2721 | dits[0] = 0.16; |
| 2722 | dits[1] = 0.08; |
| 2723 | dits[2] = 0.08; |
| 2724 | gMC->Gsvolu("I514", "BOX ", idtmed[214], dits, 3); |
| 2725 | |
| 2726 | dits[0] = 3.4; |
| 2727 | dits[1] = 0.015; |
| 2728 | dits[2] = 0.525; |
| 2729 | gMC->Gsvolu("I512", "BOX ", idtmed[203], dits, 3); |
| 2730 | |
| 2731 | dits[0] = 0.225; |
| 2732 | dits[1] = 0.195; |
| 2733 | dits[2] = 1.955; |
| 2734 | dits[3] = 0.025; |
| 2735 | gMC->Gsvolu("I528", "TRD1", idtmed[203], dits, 4); |
| 2736 | |
| 2737 | dits[0] = 0.25; |
| 2738 | dits[1] = 0.22; |
| 2739 | dits[2] = 1.955; |
| 2740 | dits[3] = 0.025; |
| 2741 | gMC->Gsvolu("I527", "TRD1", idtmed[203], dits, 4); |
| 2742 | |
| 2743 | dits[0] = 2.17; |
| 2744 | dits[1] = 0.035; |
| 2745 | dits[2] = 0.05; |
| 2746 | gMC->Gsvolu("I526", "BOX ", idtmed[203], dits, 3); |
| 2747 | |
| 2748 | dits[0] = 2.675; |
| 2749 | dits[1] = 0.035; |
| 2750 | dits[2] = 0.05; |
| 2751 | gMC->Gsvolu("I525", "BOX ", idtmed[203], dits, 3); |
| 2752 | |
| 2753 | dits[0] = 2; |
| 2754 | dits[1] = 0.035; |
| 2755 | dits[2] = 0.05; |
| 2756 | gMC->Gsvolu("I524", "BOX ", idtmed[203], dits, 3); |
| 2757 | |
| 2758 | dits[0] = 0; |
| 2759 | dits[1] = 0.05; |
| 2760 | dits[2] = 0.205; |
| 2761 | gMC->Gsvolu("I529", "TUBE", idtmed[203], dits, 3); |
| 2762 | |
| 2763 | dits[0] = 0; |
| 2764 | dits[1] = 0.05; |
| 2765 | dits[2] = 0.17; |
| 2766 | gMC->Gsvolu("I530", "TUBE", idtmed[203], dits, 3); |
| 2767 | |
| 2768 | dits[0] = 0.15; |
| 2769 | dits[1] = 0.105; |
| 2770 | dits[2] = 0.29; |
| 2771 | dits[3] = 0.08; |
| 2772 | gMC->Gsvolu("I517", "TRD1", idtmed[203], dits, 4); |
| 2773 | |
| 2774 | if (fluid == 1) { |
| 2775 | dits[0] = 0; |
| 2776 | dits[1] = 0.07; |
| 2777 | dits[2] = 1.955; |
| 2778 | gMC->Gsvolu("I531", "TUBE", idtmed[211], dits, 3); // set water as cooling fluid |
| 2779 | } else { |
| 2780 | dits[0] = 0; |
| 2781 | dits[1] = 0.07; |
| 2782 | dits[2] = 1.955; |
| 2783 | gMC->Gsvolu("I531", "TUBE", idtmed[212], dits, 3); // set freon as cooling fluid |
| 2784 | } |
| 2785 | |
| 2786 | dits[0] = 0.07; |
| 2787 | dits[1] = 0.1; |
| 2788 | dits[2] = 1.955; |
| 2789 | gMC->Gsvolu("I532", "TUBE", idtmed[210], dits, 3); |
| 2790 | |
| 2791 | dits[0] = 0.3; |
| 2792 | dits[1] = 0.15; |
| 2793 | dits[2] = 0.15; |
| 2794 | gMC->Gsvolu("I533", "BOX ", idtmed[203], dits, 3); |
| 2795 | |
| 2796 | dits[0] = 3.65; |
| 2797 | dits[1] = 0.015; |
| 2798 | dits[2] = 2; |
| 2799 | gMC->Gsvolu("ITS5", "BOX ", idtmed[200], dits, 3); |
| 2800 | } |
| 2801 | |
| 2802 | |
| 2803 | // --- Define volumes of shield of SPD ---------------- |
| 2804 | |
| 2805 | if (! AliITSInitGeometry::SPDshieldIsTGeoNative()) { |
| 2806 | dits[0] = 8.37; |
| 2807 | dits[1] = 9.93; |
| 2808 | dits[2] = 25; |
| 2809 | gMC->Gsvolu("IC01", "TUBE", idtmed[289], dits, 3); |
| 2810 | |
| 2811 | dits[0] = 8.3; |
| 2812 | dits[1] = 9.995; |
| 2813 | dits[2] = 17.5/2.; |
| 2814 | gMC->Gsvolu("IC02", "TUBE", idtmed[289], dits, 3); |
| 2815 | } |
| 2816 | |
| 2817 | Double_t s1,s2,b1,b2; |
| 2818 | |
| 2819 | if (! AliITSInitGeometry::SDDconeIsTGeoNative()) { |
| 2820 | |
| 2821 | // --- Define volume of first cylinder between SPD and SDD -------------- |
| 2822 | dits[0] = (21.-0.128)/2.; |
| 2823 | dits[1] = 21./2.; |
| 2824 | dits[2] = 39.4; |
| 2825 | gMC->Gsvolu("ICY1", "TUBE", idtmed[208], dits, 3); |
| 2826 | |
| 074b8e6f |
2827 | // --- Define volumes of second cylinder between SDD and SSD ------------ |
| 2828 | // --- (from B. Giraudo plots - M.S. 20 Nov 2007) |
| 2829 | dits[0] = 59.5/2. - 0.06; |
| 108bd0fe |
2830 | dits[1] = 59.5/2.; |
| 074b8e6f |
2831 | dits[2] = 102/2.; // was 57 |
| 108bd0fe |
2832 | gMC->Gsvolu("ICY2", "TUBE", idtmed[208], dits, 3); |
| 2833 | |
| 074b8e6f |
2834 | dits[1] = dits[0]; |
| 2835 | dits[0] = dits[1] - 0.5; |
| 2836 | gMC->Gsvolu("ICY3", "TUBE", idtmed[267], dits, 3); |
| 2837 | |
| 2838 | dits[1] = dits[0]; |
| 2839 | dits[0] = dits[1] - 0.06; |
| 2840 | gMC->Gsvolu("ICY4", "TUBE", idtmed[208], dits, 3); |
| 2841 | |
| 108bd0fe |
2842 | // --- Define volumes of SDD cone ---------------------------------- |
| 2843 | |
| 2844 | dits[0] = 0; |
| 2845 | dits[1] = 360; |
| 2846 | dits[2] = 12; |
| bf210566 |
2847 | // |
| 108bd0fe |
2848 | dits[3] = -59.7; |
| 2849 | dits[4] = 27; |
| 2850 | dits[5] = 28.6; |
| bf210566 |
2851 | |
| 108bd0fe |
2852 | dits[6] = -42.7; |
| 2853 | dits[7] = 10; |
| 2854 | dits[8] = 28.6; |
| bf210566 |
2855 | |
| 2856 | // dits[9] = -34.65; |
| 2857 | dits[9] = -33.55; |
| 108bd0fe |
2858 | dits[10] = 10; |
| 2859 | dits[11] = 28.6; |
| bf210566 |
2860 | |
| 2861 | // dits[12] = -34.65; |
| 2862 | dits[12] = -33.55; |
| 108bd0fe |
2863 | dits[13] = 10; |
| 2864 | dits[14] = 23.495; |
| bf210566 |
2865 | |
| 2866 | //dits[15] = -23.7; |
| 2867 | dits[15] = -26.2; |
| 108bd0fe |
2868 | dits[16] = 10; |
| 2869 | dits[17] = 23.495; |
| bf210566 |
2870 | |
| 2871 | //dits[18] = -23.7; |
| 2872 | dits[18] = -26.2; |
| 108bd0fe |
2873 | dits[19] = 10; |
| 2874 | dits[20] = 14.595; |
| bf210566 |
2875 | |
| 2876 | //dits[21] = 23.7; |
| 2877 | dits[21] = 26.2; |
| 108bd0fe |
2878 | dits[22] = 10; |
| 2879 | dits[23] = 14.595; |
| bf210566 |
2880 | |
| 2881 | //dits[24] = 23.7; |
| 2882 | dits[24] = 26.2; |
| 108bd0fe |
2883 | dits[25] = 10; |
| 2884 | dits[26] = 23.495; |
| bf210566 |
2885 | |
| 2886 | // dits[27] = 34.65; |
| 2887 | dits[27] = 33.55; |
| 108bd0fe |
2888 | dits[28] = 10; |
| 2889 | dits[29] = 23.495; |
| bf210566 |
2890 | |
| 2891 | // dits[30] = 34.65; |
| 2892 | dits[30] = 33.55; |
| 108bd0fe |
2893 | dits[31] = 10; |
| 2894 | dits[32] = 28.6; |
| bf210566 |
2895 | |
| 108bd0fe |
2896 | dits[33] = 42.7; |
| 2897 | dits[34] = 10; |
| 2898 | dits[35] = 28.6; |
| bf210566 |
2899 | |
| 108bd0fe |
2900 | dits[36] = 59.7; |
| 2901 | dits[37] = 27.2637; |
| bf210566 |
2902 | dits[38] = 28.6; |
| 2903 | |
| 2904 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 2905 | dits[9] = -34.65; |
| 2906 | dits[12] = -34.65; |
| 2907 | dits[15] = -23.7; |
| 2908 | dits[18] = -23.7; |
| 2909 | dits[21] = 23.7; |
| 2910 | dits[24] = 23.7; |
| 2911 | dits[27] = 34.65; |
| 2912 | dits[30] = 34.65; |
| 2913 | } |
| 108bd0fe |
2914 | gMC->Gsvolu("IS02", "PCON", idtmed[204], dits, 39); |
| 2915 | |
| 2916 | dits[0] = 0; |
| 2917 | dits[1] = 360; |
| 2918 | dits[2] = 6; |
| 2919 | dits[3] = 38.65; |
| 2920 | dits[4] = 10.75; |
| 2921 | dits[5] = 12.25; |
| 2922 | dits[6] = 40.15; |
| 2923 | dits[7] = 10.75; |
| 2924 | dits[8] = 13.96; |
| 2925 | dits[9] = 40.15; |
| 2926 | dits[10] = 12.46; |
| 2927 | dits[11] = 13.96; |
| 2928 | dits[12] = 55.75; |
| 2929 | dits[13] = 27; |
| 2930 | dits[14] = 28.5; |
| 2931 | dits[15] = 55.75; |
| 2932 | dits[16] = 27; |
| 2933 | dits[17] = 28.5; |
| 2934 | dits[18] = 57.25; |
| 2935 | dits[19] = 27; |
| 2936 | dits[20] = 28.5; |
| 2937 | // gMC->Gsvolu("I093", "PCON", idtmed[272], dits, 21); // SDD cone |
| 2938 | gMC->Gsvolu("I093", "PCON", idtmed[287], dits, 21); // SDD cone |
| 2939 | |
| 2940 | // Redefined to make adding material for cables easier (FMD geometry) |
| 2941 | s1 = (dits[13]-dits[10])/(dits[12]-dits[9]); // Slope of conical section |
| 2942 | s2 = (dits[14]-dits[11])/(dits[12]-dits[9]); // Slope of conical section |
| 2943 | b1 = dits[13] - s1*dits[12]; // inside cone axis intersept |
| 2944 | b2 = dits[14] - s2*dits[12]; // outside cone axis intersept |
| 2945 | dits[0] = 0; //dits[0] = 0; |
| 2946 | dits[1] = 50; //dits[1] = 50; |
| 2947 | dits[2] = 4; //dits[2] = 3; |
| 2948 | |
| 2949 | dits[4] = 14.0; //dits[4] = 14; // r inner |
| 2950 | dits[5] = dits[4]; //dits[5] = 18.75; // r outer |
| 2951 | dits[3] = (dits[4]-b2)/s2; //dits[3] = 39; // Z |
| 2952 | |
| 2953 | dits[7] = dits[4]; //dits[7] = 14; // r inner |
| 2954 | dits[6] = (dits[7]-b1)/s1; //dits[6] = 46.7-3; // Z |
| 2955 | dits[8] = s2*dits[6]+b2; //dits[8] = 18.75; // r outer |
| 2956 | |
| 2957 | dits[11] = 18.75; //dits[11] = 18.75; // r outer |
| 2958 | dits[9] = (dits[11]-b2)/s2; //dits[9] = 51.45-3; // Z |
| 2959 | dits[10] = s1*dits[9]+b1; //dits[10] = 18.75; // r inner |
| 2960 | |
| 2961 | dits[13] = dits[11]; // r inner |
| 2962 | dits[14] = dits[11]; // r outer |
| 2963 | dits[12] = (dits[13]-b1)/s1; // Z |
| 2964 | // gMC->Gsvolu("I099", "PCON", idtmed[204], dits, 12); // SDD 3 cone hole |
| 2965 | gMC->Gsvolu("I099", "PCON", idtmed[285], dits, 15); // SDD 3 cone hole |
| 2966 | |
| 2967 | dits[0] = 0; //dits[0] = 0; |
| 2968 | dits[1] = 25; //dits[1] = 25; |
| 2969 | dits[2] = 4; //dits[2] = 3; |
| 2970 | |
| 2971 | dits[4] = 23.4; //dits[4] = 23.4; // r inner |
| 2972 | dits[5] = dits[4]; //dits[5] = 26.4; // r outer |
| 2973 | dits[3] = (dits[4]-b2)/s2; //dits[3] = 49; // Z |
| 2974 | |
| 2975 | dits[7] = dits[4]; //dits[7] = 23.4; // r inner |
| 2976 | dits[6] = (dits[7]-b1)/s1; //dits[6] = 56.1-3; // Z |
| 2977 | dits[8] = s2*dits[6]+b2; //dits[8] = 26.4; // r outer |
| 2978 | |
| 2979 | dits[11] = 26.4; //dits[11] = 26.4; // r outer |
| 2980 | dits[9] = (dits[11]-b2)/s2; //dits[9] = 59.1-3; // Z |
| 2981 | dits[10] = s1*dits[9]+b1; //dits[10] = 26.4; // r inner |
| 2982 | |
| 2983 | dits[13] = dits[11]; // r inner |
| 2984 | dits[14] = dits[11]; // r outer |
| 2985 | dits[12] = (dits[13]-b1)/s1; // Z |
| 2986 | // gMC->Gsvolu("I200", "PCON", idtmed[204], dits, 12); // SDD 4 cone hole |
| 2987 | gMC->Gsvolu("I200", "PCON", idtmed[285], dits, 15); // SDD 4 cone hole |
| 2988 | //Begin_Html |
| 2989 | /* |
| 2990 | <img src="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_FMD_PMD_Geom.eps"> |
| 2991 | </pre> |
| 2992 | <br clear=left> |
| 2993 | <font size=+2 color=blue> |
| 2994 | <p>SDD Support cone with other forward detectors. Shown in |
| 2995 | brown are a posible cabling layout. |
| 2996 | </font> |
| 2997 | */ |
| 2998 | //End_Html |
| 2999 | dits[0] = 10.0; |
| 3000 | dits[1] = 10.5; |
| 3001 | dits[2] = 0.25; |
| 3002 | gMC->Gsvolu("I090", "TUBE", idtmed[224], dits, 3); // SDD cylinder flange |
| 3003 | |
| 3004 | dits[0] = 21.95; |
| 3005 | dits[1] = 22.95; |
| 3006 | dits[2] = 1; |
| 3007 | gMC->Gsvolu("I098", "TUBE", idtmed[283], dits, 3); // ladder support on layer 4 |
| 3008 | |
| 3009 | dits[0] = 13.1; |
| 3010 | dits[1] = 14.1; |
| 3011 | dits[2] = 1; |
| 3012 | gMC->Gsvolu("I097", "TUBE", idtmed[283], dits, 3); // ladder support on layer 3 |
| 3013 | |
| 3014 | dits[0] = 1; |
| 3015 | dits[1] = 1; |
| 3016 | dits[2] = 7.74; |
| 3017 | gMC->Gsvolu("I202", "BOX ", idtmed[272], dits, 3); |
| 3018 | |
| bf210566 |
3019 | if (AliITSInitGeometry::SDDIsTGeoNative()) |
| 3020 | dits[0] = 0.9; |
| 3021 | else |
| 3022 | dits[0] = 1; |
| 108bd0fe |
3023 | dits[1] = 1; |
| 3024 | dits[2] = 9.14; |
| 3025 | gMC->Gsvolu("I203", "BOX ", idtmed[272], dits, 3); |
| 3026 | |
| 3027 | dits[0] = 21.95; |
| 3028 | dits[1] = 22.95; |
| 3029 | dits[2] = 1; |
| 3030 | gMC->Gsvolu("I095", "TUBE", idtmed[224], dits, 3); |
| 3031 | |
| 3032 | dits[0] = 3; |
| 3033 | dits[1] = 2.7; |
| 3034 | dits[2] = 1; |
| 3035 | dits[3] = 0.63; |
| 3036 | gMC->Gsvolu("I096", "TRD1", idtmed[264], dits, 4); |
| 3037 | |
| 3038 | dits[0] = 13.1; |
| 3039 | dits[1] = 14.1; |
| 3040 | dits[2] = 1; |
| 3041 | gMC->Gsvolu("I094", "TUBE", idtmed[224], dits, 3); |
| 3042 | } |
| 3043 | |
| 3044 | if (! AliITSInitGeometry::SSDconeIsTGeoNative()) { |
| 3045 | // --- Define volumes of SSD cone ---------------------------------- |
| 3046 | |
| 3047 | dits[0] = 0; |
| 3048 | dits[1] = 360; |
| 3049 | dits[2] = 12; |
| bf210566 |
3050 | |
| 108bd0fe |
3051 | dits[3] = -zmax; |
| bf210566 |
3052 | dits[4] = 46; |
| 3053 | dits[5] = 49.25; |
| 3054 | |
| 108bd0fe |
3055 | dits[6] = -61.2; |
| 3056 | dits[7] = 28.7; |
| bf210566 |
3057 | dits[8] = 49.25; |
| 3058 | |
| 108bd0fe |
3059 | dits[9] = -57.5; |
| 3060 | dits[10] = 28.7; |
| bf210566 |
3061 | dits[11] = 49.25; |
| 3062 | |
| 108bd0fe |
3063 | dits[12] = -57.5; |
| 3064 | dits[13] = 28.7; |
| 3065 | dits[14] = 43.5; |
| bf210566 |
3066 | |
| 3067 | //dits[15] = -49.2; |
| 3068 | dits[15] = -53.4-0.75; |
| 108bd0fe |
3069 | dits[16] = 28.7; |
| 3070 | dits[17] = 43.5; |
| bf210566 |
3071 | |
| 3072 | //dits[18] = -49.2; |
| 3073 | dits[18] = -53.4-0.75; |
| 108bd0fe |
3074 | dits[19] = 28.7; |
| 3075 | dits[20] = 36.85; |
| bf210566 |
3076 | |
| 3077 | //dits[21] = 50.6; |
| 3078 | dits[21] = 53.4+0.75; |
| 108bd0fe |
3079 | dits[22] = 28.7; |
| 3080 | dits[23] = 36.85; |
| bf210566 |
3081 | |
| 3082 | dits[24] = 53.4+0.75; |
| 3083 | //dits[24] = 50.6; |
| 108bd0fe |
3084 | dits[25] = 28.7; |
| 3085 | dits[26] = 43.5; |
| bf210566 |
3086 | |
| 108bd0fe |
3087 | dits[27] = 57.5; |
| 3088 | dits[28] = 28.7; |
| 3089 | dits[29] = 43.5; |
| bf210566 |
3090 | |
| 108bd0fe |
3091 | dits[30] = 57.5; |
| 3092 | dits[31] = 28.7; |
| bf210566 |
3093 | dits[32] = 49.25; |
| 3094 | |
| 108bd0fe |
3095 | dits[33] = 61.2; |
| 3096 | dits[34] = 28.7; |
| 3097 | dits[35] = 49.25; |
| 3098 | dits[36] = zmax; |
| 3099 | dits[37] = 46; |
| bf210566 |
3100 | dits[38] = 49.25; |
| 3101 | |
| 3102 | if (! AliITSInitGeometry::SSDIsTGeoNative()) { |
| 3103 | dits[15] = -49.2; |
| 3104 | dits[18] = -49.2; |
| 3105 | dits[21] = 50.6; |
| 3106 | dits[24] = 50.6; |
| 3107 | } |
| 3108 | |
| 108bd0fe |
3109 | gMC->Gsvolu("IS01", "PCON", idtmed[204], dits, 39); // SSD cone mother volume |
| 3110 | |
| 3111 | dits[0] = 0; |
| 3112 | dits[1] = 360; |
| 3113 | dits[2] = 6; |
| 3114 | dits[3] = -zmax; |
| 3115 | dits[4] = 47.75; |
| 3116 | dits[5] = 49.25; |
| 3117 | dits[6] = -zmax+2.; |
| 3118 | dits[7] = 47.75; |
| 3119 | dits[8] = 49.25; |
| 3120 | dits[9] = -71.2819; |
| 3121 | dits[10] = 46.75; |
| 3122 | dits[11] = 49.0319; |
| 3123 | dits[12] = -57.25; // was 58.5 |
| 3124 | dits[13] = 32.9681; |
| 3125 | dits[14] = 34.75; |
| 3126 | dits[15] = -57.25; // was 58.5 |
| 3127 | dits[16] = 30; |
| 3128 | dits[17] = 34.75; |
| 3129 | dits[18] = -55.75; // was 57 |
| 3130 | dits[19] = 30; |
| 3131 | dits[20] = 32.25; // was 31.5 |
| 3132 | // gMC->Gsvolu("I212", "PCON", idtmed[272], dits, 21); // SSD cone |
| 3133 | gMC->Gsvolu("I212", "PCON", idtmed[288], dits, 21); // SSD cone |
| 3134 | |
| 3135 | s1 = (dits[10]-dits[13])/(dits[9]-dits[12]); // Slope of conical section |
| 3136 | s2 = (dits[11]-dits[14])/(dits[9]-dits[12]); // Slope of conical section |
| 3137 | b1 = dits[13] - s1*dits[12]; // inside cone axis intersept |
| 3138 | b2 = dits[14] - s2*dits[12]; // outside cone axis intersept |
| 3139 | dits[0] = 0; |
| 3140 | dits[1] = 25; |
| 3141 | dits[2] = 4; //dits[2] = 5; |
| 3142 | |
| 3143 | dits[4] = 45.50; //dits[4] = 45.5; // r inner |
| 3144 | dits[5] = dits[4]; //dits[5] = 45.5; // r outer |
| 3145 | dits[3] = (dits[4] - b1)/s1; //dits[3] = -zmax+3; // z |
| 3146 | |
| 3147 | dits[8] = dits[4]; //dits[8] = 45.5; // r outer |
| 3148 | dits[6] = (dits[8] - b2)/s2; //dits[6] = -69.7+3;; // z |
| 3149 | dits[7] = s1*dits[6] + b1; //dits[7] = 37; // r inner |
| 3150 | |
| 3151 | dits[10] = 37.00; //dits[10] = 37; // r inner |
| 3152 | dits[9] = (dits[10]-b1)/s1; //dits[9] = -68.5+3;; // z |
| 3153 | dits[11] = s2*dits[9]+b2; //dits[11] = 45.5; // r outer |
| 3154 | |
| 3155 | dits[13] = dits[10]; //dits[13] = 37; // r inner |
| 3156 | dits[14] = dits[13]; //dits[14] = 45.5; // r outer |
| 3157 | dits[12] = (dits[14] - b2)/s2; //dits[12] = -68.5+4.8;; // z |
| 3158 | // gMC->Gsvolu("I215", "PCON", idtmed[204], dits, 18); // SSD cone hole |
| 3159 | gMC->Gsvolu("I215", "PCON", idtmed[286], dits, 15); // SSD cone hole |
| 3160 | //Begin_Html |
| 3161 | /* |
| 3162 | <img src="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_FMD_PMD_Geom.eps"> |
| 3163 | </pre> |
| 3164 | <br clear=left> |
| 3165 | <font size=+2 color=blue> |
| 3166 | <p>SSD Support cone with other forward detectors. Shown in |
| 3167 | brown are a posible cabling layout. |
| 3168 | </font> |
| 3169 | */ |
| 3170 | //End_Html |
| 3171 | |
| 3172 | dits[0] = 28.75; |
| 3173 | dits[1] = 29.75; |
| 3174 | dits[2] = 0.5; |
| 3175 | gMC->Gsvolu("I211", "TUBE", idtmed[224], dits, 3); // SSD cylinder flange |
| 3176 | |
| 3177 | dits[0] = 35.8; |
| 3178 | dits[1] = 36.8; |
| 3179 | dits[2] = 1; |
| 3180 | gMC->Gsvolu("I217", "TUBE", idtmed[283], dits, 3); // ladder support on layer 5 |
| 3181 | |
| 3182 | dits[0] = 41.4; |
| 3183 | dits[1] = 42.4; |
| 3184 | dits[2] = 1; |
| 3185 | gMC->Gsvolu("I219", "TUBE", idtmed[283], dits, 3); // ladder support on layer 6 |
| 3186 | |
| 3187 | dits[0] = 42.05+5.; |
| 3188 | dits[1] = 42.55+5.; |
| 3189 | dits[2] = 1.25; |
| 3190 | gMC->Gsvolu("I214", "TUBE", idtmed[224], dits, 3); // layer 6 electronic support |
| 3191 | // this will change after PPR |
| 3192 | dits[0] = 37.05+5.; |
| 3193 | dits[1] = 37.55+5.; |
| 3194 | dits[2] = 1.25; |
| 3195 | gMC->Gsvolu("I213", "TUBE", idtmed[224], dits, 3); // layer 5 electronic support |
| 3196 | // this will change after PPR |
| 3197 | |
| 3198 | dits[0] = 0; |
| 3199 | dits[1] = 3.2; |
| 3200 | dits[2] = 9; |
| 3201 | dits[3] = -14; |
| 3202 | dits[4] = 30.5; |
| 3203 | dits[5] = 33.5; |
| 3204 | dits[6] = -9.85; |
| 3205 | dits[7] = 30.5; |
| 3206 | dits[8] = 33.5; |
| 3207 | dits[9] = -9.85; |
| 3208 | dits[10] = 30.5; |
| 3209 | dits[11] = 43.45; |
| 3210 | dits[12] = -7.85; |
| 3211 | dits[13] = 30.5; |
| 3212 | dits[14] = 43.45; |
| 3213 | dits[15] = -7.85; |
| 3214 | dits[16] = 30.5; |
| 3215 | dits[17] = 36.5; |
| 3216 | dits[18] = -7; |
| 3217 | dits[19] = 30.5; |
| 3218 | dits[20] = 36.5; |
| 3219 | dits[21] = -4; |
| 3220 | dits[22] = 33.0173; |
| 3221 | dits[23] = 36.5; |
| 3222 | dits[24] = -4; |
| 3223 | dits[25] = 33.0173; |
| 3224 | dits[26] = 36.80; |
| 3225 | dits[27] = -2; |
| 3226 | dits[28] = 34.6955; |
| 3227 | dits[29] = 36.80; |
| 3228 | gMC->Gsvolu("I216", "PCON", idtmed[272], dits, 30); // supports (1-6) of the ladders |
| 3229 | } |
| 3230 | |
| 3231 | |
| 3232 | // --- Place SPD (option 'b') volumes into their mother volume IT12 |
| 3233 | |
| 3234 | // SPD - option 'b' |
| 3235 | // (this is the default) |
| 3236 | |
| 3237 | //if (option == 2) { |
| 3238 | if (! AliITSInitGeometry::SPDIsTGeoNative()) { |
| 3239 | |
| 8f8273a4 |
3240 | gMC->Gspos("I12B",1,"IT12",0.0,0.0,0.0,0,"ONLY"); |
| 3241 | gMC->Gspos("I12B",8,"IT12",0.0,0.0,0.0,idrotm[233],"ONLY"); |
| 3242 | gMC->Gspos("I12B",7,"IT12",0.0,0.0,0.0,idrotm[244],"ONLY"); |
| 3243 | gMC->Gspos("I12B",6,"IT12",0.0,0.0,0.0,idrotm[236],"ONLY"); |
| 3244 | gMC->Gspos("I12B",2,"IT12",0.0,0.0,0.0,idrotm[245],"ONLY"); |
| 3245 | gMC->Gspos("I12B",3,"IT12",0.0,0.0,0.0,idrotm[234],"ONLY"); |
| 3246 | gMC->Gspos("I12B",4,"IT12",0.0,0.0,0.0,idrotm[246],"ONLY"); |
| 3247 | gMC->Gspos("I12B",5,"IT12",0.0,0.0,0.0,idrotm[247],"ONLY"); |
| 3248 | gMC->Gspos("I12B",9,"IT12",0.0,0.0,0.0,idrotm[248],"ONLY"); |
| 3249 | gMC->Gspos("I12B",10,"IT12",0.0,0.0,0.0,idrotm[249],"ONLY"); |
| 108bd0fe |
3250 | deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(270.*TMath::Pi()/180.); // see definition of idrotm[238] |
| 3251 | deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(270.*TMath::Pi()/180.); // see definition of idrotm[238] |
| 3252 | gMC->Gspos("I10B",2,"I12B",0.203+deltax,3.8206+deltay,0.0,idrotm[238],"ONLY"); |
| 3253 | deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(252.*TMath::Pi()/180.); // see definition of idrotm[239] |
| 3254 | deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(252.*TMath::Pi()/180.); // see definition of idrotm[239] |
| 3255 | gMC->Gspos("I10B",1,"I12B",1.4531+deltax,3.8152+deltay,0.0,idrotm[239],"ONLY"); |
| 3256 | deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(40.*TMath::Pi()/180.); // see definition of idrotm[240] |
| 3257 | deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(40.*TMath::Pi()/180.); // see definition of idrotm[240] |
| 3258 | gMC->Gspos("I20B",1,"I12B",3.0174+deltax,6.5143+deltay,0.0,idrotm[240],"ONLY"); |
| 3259 | deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(49.*TMath::Pi()/180.); // see definition of idrotm[241] |
| 3260 | deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(49.*TMath::Pi()/180.); // see definition of idrotm[241] |
| 3261 | gMC->Gspos("I20B",2,"I12B",1.9612+deltax,6.9062+deltay,0.0,idrotm[241],"ONLY"); |
| 3262 | deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(58.*TMath::Pi()/180.); // see definition of idrotm[242] |
| 3263 | deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(58.*TMath::Pi()/180.); // see definition of idrotm[242] |
| 3264 | gMC->Gspos("I20B",3,"I12B",0.8567+deltax,7.1279+deltay,0.0,idrotm[242],"ONLY"); |
| 3265 | deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(67.*TMath::Pi()/180.); // see definition of idrotm[243] |
| 3266 | deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(67.*TMath::Pi()/180.); // see definition of idrotm[243] |
| 3267 | gMC->Gspos("I20B",4,"I12B",-0.2689+deltax,7.1742+deltay,0.0,idrotm[243],"ONLY"); |
| 3268 | gMC->Gspos("I123",1,"I12B",-0.2978,5.5196,0.0,idrotm[214],"ONLY"); |
| 3269 | gMC->Gspos("I121",1,"I12B",-0.2385,4.1518,0.0,idrotm[213],"ONLY"); |
| 3270 | gMC->Gspos("I122",1,"I12B",-0.2968,4.0207,0.0,idrotm[212],"ONLY"); |
| 3271 | gMC->Gspos("I120",1,"I12B",-0.3672,3.9056,0.0,0,"ONLY"); |
| 3272 | gMC->Gspos("I144",1,"I12B",-0.2538,3.8556,0.0,0,"ONLY"); |
| 3273 | gMC->Gspos("I113",3,"I12B",0.1095,3.9056,0.0,0,"ONLY"); |
| 3274 | gMC->Gspos("I143",1,"I12B",0.4365,3.8556,0.0,idrotm[236],"ONLY"); |
| 3275 | gMC->Gspos("I142",1,"I12B",0.5136,3.9056,0.0,idrotm[235],"ONLY"); |
| 3276 | gMC->Gspos("I141",1,"I12B",0.5636,3.9752,0.0,idrotm[237],"ONLY"); |
| 3277 | gMC->Gspos("I140",1,"I12B",0.6336,4.0447,0.0,idrotm[234],"ONLY"); |
| 3278 | gMC->Gspos("I139",1,"I12B",0.8297,4.0545,0.0,idrotm[207],"ONLY"); |
| 3279 | gMC->Gspos("I113",5,"I12B",1.2575,3.9681,0.0,idrotm[207],"ONLY"); |
| 3280 | gMC->Gspos("I138",1,"I12B",1.66,3.7848,0.0,idrotm[207],"ONLY"); |
| 3281 | gMC->Gspos("I137",1,"I12B",1.8556,3.7738,0.0,idrotm[233],"ONLY"); |
| 3282 | gMC->Gspos("I136",1,"I12B",2.6224,4.874,0.0,idrotm[232],"ONLY"); |
| 3283 | gMC->Gspos("I135",1,"I12B",3.2967,6.0337,0.0,idrotm[231],"ONLY"); |
| 3284 | gMC->Gspos("I134",1,"I12B",3.266,6.1636,0.0,idrotm[230],"ONLY"); |
| 3285 | gMC->Gspos("I113",1,"I12B",2.9903,6.4144,0.0,idrotm[211],"ONLY"); |
| 3286 | gMC->Gspos("I133",3,"I12B",2.7631,6.7627,0.0,idrotm[230],"ONLY"); |
| 3287 | gMC->Gspos("I132",3,"I12B",2.62,6.8555,0.0,idrotm[229],"ONLY"); |
| 3288 | gMC->Gspos("I131",3,"I12B",2.648,6.6023,0.0,idrotm[228],"ONLY"); |
| 3289 | gMC->Gspos("I130",3,"I12B",2.6569,6.3431,0.0,idrotm[227],"ONLY"); |
| 3290 | gMC->Gspos("I129",3,"I12B",2.3906,6.4819,0.0,idrotm[226],"ONLY"); |
| 3291 | gMC->Gspos("I113",2,"I12B",1.9488,6.7998,0.0,idrotm[210],"ONLY"); |
| 3292 | gMC->Gspos("I133",2,"I12B",1.6699,7.1085,0.0,idrotm[226],"ONLY"); |
| 3293 | gMC->Gspos("I132",2,"I12B",1.5142,7.1777,0.0,idrotm[225],"ONLY"); |
| 3294 | gMC->Gspos("I131",2,"I12B",1.5814,6.932,0.0,idrotm[224],"ONLY"); |
| 3295 | gMC->Gspos("I130",2,"I12B",1.6308,6.6774,0.0,idrotm[223],"ONLY"); |
| 3296 | gMC->Gspos("I129",2,"I12B",1.346,6.7728,0.0,idrotm[222],"ONLY"); |
| 3297 | gMC->Gspos("I113",6,"I12B",0.8599,7.0176,0.0,idrotm[209],"ONLY"); |
| 3298 | gMC->Gspos("I133",1,"I12B",0.5362,7.2789,0.0,idrotm[222],"ONLY"); |
| 3299 | gMC->Gspos("I132",1,"I12B",0.3715,7.3228,0.0,idrotm[221],"ONLY"); |
| 3300 | gMC->Gspos("I131",1,"I12B",0.4763,7.0907,0.0,idrotm[220],"ONLY"); |
| 3301 | gMC->Gspos("I130",1,"I12B",0.5649,6.8469,0.0,idrotm[219],"ONLY"); |
| 3302 | gMC->Gspos("I129",1,"I12B",0.2688,6.8966,0.0,idrotm[218],"ONLY"); |
| 3303 | gMC->Gspos("I113",4,"I12B",-0.2497,7.0624,0.0,idrotm[208],"ONLY"); |
| 3304 | gMC->Gspos("I128",1,"I12B",-0.6103,7.2698,0.0,idrotm[218],"ONLY"); |
| 3305 | gMC->Gspos("I126",1,"I12B",-0.7799,7.2874,0.0,idrotm[217],"ONLY"); |
| 3306 | gMC->Gspos("I125",1,"I12B",-0.6315,7.0883,0.0,idrotm[216],"ONLY"); |
| 3307 | gMC->Gspos("I124",1,"I12B",-0.4965,6.8742,0.0,idrotm[215],"ONLY"); |
| 3308 | gMC->Gspos("I105",3,"I10B",-0.05,-0.01,-16.844,idrotm[201],"ONLY"); |
| 3309 | gMC->Gspos("I105",4,"I10B",-0.05,-0.01,16.844,0,"ONLY"); |
| 8f8273a4 |
3310 | |
| 3311 | // Insertion of half-stave level in old SPD1 |
| 3312 | gGeoManager->MakeVolumeAssembly("L1H-STAVE0"); |
| 3313 | gGeoManager->MakeVolumeAssembly("L1H-STAVE1"); |
| 3314 | gMC->Gspos("L1H-STAVE0",1,"I10B",0,0,0,0,"ONLY"); |
| 3315 | gMC->Gspos("L1H-STAVE1",1,"I10B",0,0,0,0,"ONLY"); |
| 3316 | gMC->Gspos("I107",1,"L1H-STAVE0",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY"); |
| 3317 | gMC->Gspos("I107",2,"L1H-STAVE0",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY"); |
| 3318 | gMC->Gspos("I107",3,"L1H-STAVE1",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY"); |
| 3319 | gMC->Gspos("I107",4,"L1H-STAVE1",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY"); |
| 3320 | // gMC->Gspos("I107",2,"I10B",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY"); |
| 3321 | // gMC->Gspos("I107",1,"I10B",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY"); |
| 3322 | // gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY"); |
| 3323 | // gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY"); |
| 3324 | |
| 3325 | // Insertion of half-stave level in old SPD2 |
| 3326 | gGeoManager->MakeVolumeAssembly("L2H-STAVE0"); |
| 3327 | gGeoManager->MakeVolumeAssembly("L2H-STAVE1"); |
| 3328 | gMC->Gspos("L2H-STAVE0",1,"I20B",0,0,0,0,"ONLY"); |
| 3329 | gMC->Gspos("L2H-STAVE1",1,"I20B",0,0,0,0,"ONLY"); |
| 3330 | gMC->Gspos("I1D7",1,"L2H-STAVE0",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY"); |
| 3331 | gMC->Gspos("I1D7",2,"L2H-STAVE0",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY"); |
| 3332 | gMC->Gspos("I1D7",3,"L2H-STAVE1",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY"); |
| 3333 | gMC->Gspos("I1D7",4,"L2H-STAVE1",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY"); |
| 3334 | // gMC->Gspos("I1D7",2,"I20B",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY"); |
| 3335 | // gMC->Gspos("I1D7",1,"I20B",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY"); |
| 3336 | // gMC->Gspos("I1D7",4,"I20B",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY"); |
| 3337 | // gMC->Gspos("I1D7",3,"I20B",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY"); |
| 3338 | |
| 108bd0fe |
3339 | gMC->Gspos("I109",1,"I10B",-0.138,0.015,-16.844,idrotm[201],"ONLY"); |
| 3340 | gMC->Gspos("I109",2,"I10B",-0.138,0.015,16.844,0,"ONLY"); |
| 3341 | gMC->Gspos("I108",1,"I10B",-0.138,-di10b[1]+2.*di107[1]+di108[1],0.0,0,"ONLY"); |
| 3342 | gMC->Gspos("I105",1,"I20B",-0.05,-0.01,-16.844,idrotm[201],"ONLY"); |
| 3343 | gMC->Gspos("I105",2,"I20B",-0.05,-0.01,16.844,0,"ONLY"); |
| 108bd0fe |
3344 | gMC->Gspos("I109",3,"I20B",-0.138,0.015,-16.844,idrotm[201],"ONLY"); |
| 3345 | gMC->Gspos("I109",4,"I20B",-0.138,0.015,16.844,0,"ONLY"); |
| 3346 | gMC->Gspos("I108",2,"I20B",-0.138,-di20b[1]+2.*di1d7[1]+di108[1],0.0,0,"ONLY"); |
| 3347 | gMC->Gspos("I112",2,"I113",0.25,0.02,0.0,idrotm[206],"ONLY"); |
| 3348 | gMC->Gspos("I111",2,"I113",0.1318,-0.0008,0.0,idrotm[205],"ONLY"); |
| 3349 | gMC->Gspos("I118",1,"I113",0.0,-0.0454,0.0,0,"ONLY"); |
| 3350 | gMC->Gspos("I110",1,"I113",0.0,0.0492,0.0,0,"ONLY"); |
| 3351 | gMC->Gspos("I114",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY"); |
| 3352 | gMC->Gspos("I115",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY"); |
| 3353 | gMC->Gspos("I115",2,"I113",-0.063,0.0042,0.0,idrotm[237],"ONLY"); |
| 3354 | gMC->Gspos("I114",2,"I113",-0.063,0.0042,0.0,idrotm[237],"ONLY"); |
| 3355 | gMC->Gspos("I116",1,"I113",0.0,0.0042,0.0,0,"ONLY"); |
| 3356 | gMC->Gspos("I111",1,"I113",-0.1318,-0.0008,0.0,idrotm[204],"ONLY"); |
| 3357 | gMC->Gspos("I112",1,"I113",-0.25,0.02,0.0,idrotm[203],"ONLY"); |
| 3358 | gMC->Gspos("I106",1,"I107",0.0,-ddet1,-1.4,0,"ONLY"); |
| 3359 | gMC->Gspos("I106",2,"I107",0.0,-ddet1,0.0,0,"ONLY"); |
| 3360 | gMC->Gspos("I106",3,"I107",0.0,-ddet1,1.4,0,"ONLY"); |
| 3361 | gMC->Gspos("I106",4,"I107",0.0,-ddet1,2.8,0,"ONLY"); |
| 3362 | gMC->Gspos("I106",5,"I107",0.0,-ddet1,-2.8,0,"ONLY"); |
| 3363 | gMC->Gspos("I101",1,"I107",0.0,dchip1,0.0,0,"ONLY"); |
| 3364 | gMC->Gspos("I1D6",1,"I1D7",0.0,-ddet2,-1.4,0,"ONLY"); |
| 3365 | gMC->Gspos("I1D6",2,"I1D7",0.0,-ddet2,0.0,0,"ONLY"); |
| 3366 | gMC->Gspos("I1D6",3,"I1D7",0.0,-ddet2,1.4,0,"ONLY"); |
| 3367 | gMC->Gspos("I1D6",4,"I1D7",0.0,-ddet2,2.8,0,"ONLY"); |
| 3368 | gMC->Gspos("I1D6",5,"I1D7",0.0,-ddet2,-2.8,0,"ONLY"); |
| 3369 | gMC->Gspos("I1D1",1,"I1D7",0.0,dchip2,0.0,0,"ONLY"); |
| 3370 | gMC->Gspos("I117",1,"I116",0.0,0.0,0.0,0,"ONLY"); |
| 3371 | gMC->Gspos("ITS1",1,"I101",0.0,0.0,0.0,0,"ONLY"); |
| 3372 | gMC->Gspos("ITS2",1,"I1D1",0.0,0.0,0.0,0,"ONLY"); |
| 3373 | gMC->Gspos("I651",1,"IT12",0.0,0.0,26.05,0,"ONLY"); |
| 8f8273a4 |
3374 | gMC->Gspos("I651",2,"IT12",0.0,0.0,-26.05,0,"ONLY"); |
| 3375 | |
| 3376 | gMC->Gspos("I650",16,"IT12",0.0,0.0,22.0,idrotm[1104],"ONLY"); |
| 3377 | gMC->Gspos("I650",20,"IT12",0.0,0.0,22.0,idrotm[1130],"ONLY"); |
| 3378 | gMC->Gspos("I650",18,"IT12",0.0,0.0,22.0,idrotm[1117],"ONLY"); |
| 3379 | gMC->Gspos("I650",1,"IT12",0.0,0.0,22.0,0,"ONLY"); |
| 3380 | gMC->Gspos("I650",4,"IT12",0.0,0.0,22.0,idrotm[1106],"ONLY"); |
| 3381 | gMC->Gspos("I650",6,"IT12",0.0,0.0,22.0,idrotm[1039],"ONLY"); |
| 3382 | gMC->Gspos("I650",8,"IT12",0.0,0.0,22.0,idrotm[1107],"ONLY"); |
| 3383 | gMC->Gspos("I650",10,"IT12",0.0,0.0,22.0,idrotm[1065],"ONLY"); |
| 3384 | gMC->Gspos("I650",12,"IT12",0.0,0.0,22.0,idrotm[1078],"ONLY"); |
| 3385 | gMC->Gspos("I650",14,"IT12",0.0,0.0,22.0,idrotm[1091],"ONLY"); |
| 3386 | gMC->Gspos("I650",19,"IT12",0.0,0.0,-22.0,idrotm[1108],"ONLY"); |
| 3387 | gMC->Gspos("I650",2,"IT12",0.0,0.0,-22.0,idrotm[1109],"ONLY"); |
| 3388 | gMC->Gspos("I650",3,"IT12",0.0,0.0,-22.0,idrotm[1110],"ONLY"); |
| 3389 | gMC->Gspos("I650",5,"IT12",0.0,0.0,-22.0,idrotm[1111],"ONLY"); |
| 3390 | gMC->Gspos("I650",7,"IT12",0.0,0.0,-22.0,idrotm[1112],"ONLY"); |
| 3391 | gMC->Gspos("I650",9,"IT12",0.0,0.0,-22.0,idrotm[1113],"ONLY"); |
| 3392 | gMC->Gspos("I650",11,"IT12",0.0,0.0,-22.0,idrotm[1114],"ONLY"); |
| 3393 | gMC->Gspos("I650",13,"IT12",0.0,0.0,-22.0,idrotm[1115],"ONLY"); |
| 3394 | gMC->Gspos("I650",15,"IT12",0.0,0.0,-22.0,idrotm[1116],"ONLY"); |
| 3395 | gMC->Gspos("I650",17,"IT12",0.0,0.0,-22.0,idrotm[1118],"ONLY"); |
| 3396 | gMC->Gspos("I666",1,"I650",0.0,0.0,0.25,idrotm[1003],"ONLY"); |
| 3397 | |
| 108bd0fe |
3398 | gMC->Gspos("I667",1,"I650",0.1102,0.9945,0.45,idrotm[1088],"ONLY"); |
| 3399 | gMC->Gspos("I669",3,"I650",0.1883,4.0372,-3.2,0,"ONLY"); |
| 3400 | gMC->Gspos("I671",3,"I650",0.1883,4.0372,0.6,0,"ONLY"); |
| 3401 | gMC->Gspos("I669",2,"I650",1.3343,4.0609,-3.2,0,"ONLY"); |
| 3402 | gMC->Gspos("I671",2,"I650",1.3343,4.0609,0.6,0,"ONLY"); |
| 3403 | gMC->Gspos("I669",6,"I650",2.9567,6.1959,-3.2,idrotm[1089],"ONLY"); |
| 3404 | gMC->Gspos("I671",6,"I650",2.9567,6.1959,0.6,idrotm[1089],"ONLY"); |
| 3405 | gMC->Gspos("I669",5,"I650",1.9511,6.5822,-3.2,idrotm[1011],"ONLY"); |
| 3406 | gMC->Gspos("I671",5,"I650",1.9511,6.5822,0.6,idrotm[1011],"ONLY"); |
| 3407 | gMC->Gspos("I669",4,"I650",0.8974,6.8064,-3.2,idrotm[1090],"ONLY"); |
| 3408 | gMC->Gspos("I671",4,"I650",0.8974,6.8064,0.6,idrotm[1090],"ONLY"); |
| 3409 | gMC->Gspos("I669",1,"I650",-0.1784,6.863,-3.2,0,"ONLY"); |
| 3410 | gMC->Gspos("I671",1,"I650",-0.1784,6.863,0.6,0,"ONLY"); |
| 3411 | gMC->Gspos("I673",1,"I650",0.2173,4.8037,1.8,0,"ONLY"); |
| 3412 | gMC->Gspos("I673",6,"I650",1.5093,4.5605,1.8,0,"ONLY"); |
| 3413 | gMC->Gspos("I673",4,"I650",-0.173,6.2531,1.8,idrotm[1092],"ONLY"); |
| 3414 | gMC->Gspos("I673",3,"I650",0.8073,6.2032,1.8,idrotm[1093],"ONLY"); |
| 3415 | gMC->Gspos("I673",2,"I650",1.7678,6.0005,1.8,idrotm[1094],"ONLY"); |
| 3416 | gMC->Gspos("I673",5,"I650",2.6847,5.6501,1.8,0,"ONLY"); |
| 3417 | gMC->Gspos("I676",2,"I650",1.7618,5.2269,2.5,0,"ONLY"); |
| 3418 | gMC->Gspos("I676",1,"I650",0.4018,5.5869,2.5,0,"ONLY"); |
| 3419 | gMC->Gspos("I668",1,"I667",0.0,0.0,0.0,0,"ONLY"); |
| 3420 | gMC->Gspos("I670",1,"I669",0.0,0.0,0.0,0,"ONLY"); |
| 3421 | gMC->Gspos("I672",1,"I671",0.0,0.0,0.0,0,"ONLY"); |
| 3422 | gMC->Gspos("I674",1,"I673",0.0,0.0,0.0,0,"MANY"); |
| 3423 | gMC->Gspos("I675",1,"I673",0.0,0.0,-0.5,0,"ONLY"); |
| 8f8273a4 |
3424 | gMC->Gspos("I677",1,"I676",0.0,0.0,0.0,0,"ONLY"); |
| 108bd0fe |
3425 | gMC->Gspos("I678",1,"I676",0.0,0.0,-0.95,0,"ONLY"); |
| 3426 | } |
| 3427 | |
| 3428 | // --- Place SDD volumes into their mother volume IT34 |
| 3429 | |
| 3430 | // -- position SDD detectors of ladder 3 / layer 3 |
| 3431 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 3432 | |
| 3433 | gMC->Gspos("ITS3", 1,"I302", 0.0, 0.0, 0.0, 0, "ONLY"); |
| 3434 | ySDD = ySDDsep/2.+iI302dits[1]; |
| 3435 | for (iSDD=0; iSDD<6; iSDD++) { |
| 3436 | gMC->Gspos("I302", iSDD+1, "I004", 0.0, ySDD, zSDDlay3[iSDD], 0, "ONLY"); |
| 3437 | ySDD = -ySDD; |
| 3438 | } |
| 3439 | |
| 3440 | gMC->Gspos("I004", 1,"IT34", -3.2777, 14.3607, 0.0, idrotm[321],"ONLY"); |
| 3441 | gMC->Gspos("I004", 2,"IT34", -9.5581, 11.9855, 0.0, idrotm[333],"ONLY"); |
| 3442 | gMC->Gspos("I004", 3,"IT34",-13.2713, 6.3911, 0.0, idrotm[336],"ONLY"); |
| 3443 | gMC->Gspos("I004", 4,"IT34",-15.33, 0.0, 0.0, idrotm[350],"ONLY"); |
| 3444 | gMC->Gspos("I004", 5,"IT34",-13.2713, -6.3911, 0.0, idrotm[313],"ONLY"); |
| 3445 | gMC->Gspos("I004", 6,"IT34", -9.5581, -11.9855, 0.0, idrotm[311],"ONLY"); |
| 3446 | gMC->Gspos("I004", 7,"IT34", -3.2777, -14.3607, 0.0, idrotm[310],"ONLY"); |
| 3447 | gMC->Gspos("I004", 8,"IT34", 3.4112, -14.9456, 0.0, idrotm[386],"ONLY"); |
| 3448 | gMC->Gspos("I004", 9,"IT34", 9.184, -11.5164, 0.0, idrotm[309],"ONLY"); |
| 3449 | gMC->Gspos("I004",10,"IT34", 13.8119, -6.6514, 0.0, idrotm[308],"ONLY"); |
| 3450 | gMC->Gspos("I004",11,"IT34", 14.73, 0.0, 0.0, idrotm[356],"ONLY"); |
| 3451 | gMC->Gspos("I004",12,"IT34", 13.8119, 6.6514, 0.0, idrotm[307],"ONLY"); |
| 3452 | gMC->Gspos("I004",13,"IT34", 9.184, 11.5164, 0.0, idrotm[306],"ONLY"); |
| 3453 | gMC->Gspos("I004",14,"IT34", 3.4113, 14.9456, 0.0, idrotm[305],"ONLY"); |
| 3454 | |
| 3455 | |
| 3456 | // -- position SDD detectors of ladder 4 / layer 4 |
| 3457 | |
| 3458 | gMC->Gspos("ITS4", 1,"I402", 0.0, 0.000, 0.0, 0,"ONLY"); |
| 3459 | ySDD = -(ySDDsep/2.+iI402dits[1]); |
| 3460 | for (iSDD=0; iSDD<8; iSDD++) { |
| 3461 | gMC->Gspos("I402", iSDD+1, "I005", 0.0, ySDD, zSDDlay4[iSDD], 0, "ONLY"); |
| 3462 | ySDD = -ySDD; |
| 3463 | } |
| 3464 | |
| 3465 | gMC->Gspos("I005", 1,"IT34", -3.3629, 23.3895,-0.15, idrotm[335],"ONLY"); |
| 3466 | gMC->Gspos("I005", 2,"IT34",-10.0447, 21.9949,-0.15, idrotm[332],"ONLY"); |
| 3467 | gMC->Gspos("I005", 3,"IT34",-15.4744, 17.8584,-0.15, idrotm[331],"ONLY"); |
| 3468 | gMC->Gspos("I005", 4,"IT34",-20.3415, 13.0727,-0.15, idrotm[366],"ONLY"); |
| 3469 | gMC->Gspos("I005", 5,"IT34",-22.6728, 6.6573,-0.15, idrotm[330],"ONLY"); |
| 3470 | gMC->Gspos("I005", 6,"IT34",-24.18, 0.0, -0.15, idrotm[350],"ONLY"); |
| 3471 | gMC->Gspos("I005", 7,"IT34",-22.6728, -6.6573,-0.15, idrotm[329],"ONLY"); |
| 3472 | gMC->Gspos("I005", 8,"IT34",-20.3415, -13.0727,-0.15, idrotm[328],"ONLY"); |
| 3473 | gMC->Gspos("I005", 9,"IT34",-15.4744, -17.8584,-0.15, idrotm[327],"ONLY"); |
| 3474 | gMC->Gspos("I005",10,"IT34",-10.0447, -21.9949,-0.15, idrotm[326],"ONLY"); |
| 3475 | gMC->Gspos("I005",11,"IT34", -3.3629, -23.3895,-0.15, idrotm[325],"ONLY"); |
| 3476 | gMC->Gspos("I005",12,"IT34", 3.4412, -23.9339,-0.15, idrotm[324],"ONLY"); |
| 3477 | gMC->Gspos("I005",13,"IT34", 9.8163, -21.4946,-0.15, idrotm[323],"ONLY"); |
| 3478 | gMC->Gspos("I005",14,"IT34", 15.8345, -18.274, -0.15, idrotm[322],"ONLY"); |
| 3479 | gMC->Gspos("I005",15,"IT34", 19.8788, -12.7753,-0.15, idrotm[320],"ONLY"); |
| 3480 | gMC->Gspos("I005",16,"IT34", 23.2005, -6.8123,-0.15, idrotm[319],"ONLY"); |
| 3481 | gMC->Gspos("I005",17,"IT34", 23.63, 0.0, -0.15, idrotm[318],"ONLY"); |
| 3482 | gMC->Gspos("I005",18,"IT34", 23.2005, 6.8123,-0.15, idrotm[317],"ONLY"); |
| 3483 | gMC->Gspos("I005",19,"IT34", 19.8788, 12.7753,-0.15, idrotm[316],"ONLY"); |
| 3484 | gMC->Gspos("I005",20,"IT34", 15.8345, 18.274, -0.15, idrotm[315],"ONLY"); |
| 3485 | gMC->Gspos("I005",21,"IT34", 9.8163, 21.4946,-0.15, idrotm[314],"ONLY"); |
| 3486 | gMC->Gspos("I005",22,"IT34", 3.4412, 23.9339,-0.15, idrotm[334],"ONLY"); |
| 3487 | |
| 3488 | |
| 3489 | // -- build block of the SDD ladder frame holding the electronics |
| 3490 | |
| 3491 | gMC->Gspos("I019", 1,"I018", -1.9, -1.735, 0.0, idrotm[344], "ONLY"); |
| 3492 | gMC->Gspos("I019", 2,"I018", 1.987, -1.5843, 0.0, idrotm[343], "ONLY"); |
| 3493 | gMC->Gspos("I019", 3,"I018", -0.087, 1.7066, 0.0, idrotm[342], "ONLY"); |
| 3494 | |
| 3495 | gMC->Gspos("I020", 1,"I018", -1.9782, -1.569, 0.0, idrotm[342], "ONLY"); |
| 3496 | gMC->Gspos("I020", 2,"I018", 1.8824, -1.735, 0.0, idrotm[344], "ONLY"); |
| 3497 | gMC->Gspos("I020", 3,"I018", 0.0958, 1.6913, 0.0, idrotm[343], "ONLY"); |
| 3498 | |
| 3499 | gMC->Gspos("I021", 1,"I018", 1.0761, 0.0835, 2.6008, idrotm[340], "ONLY"); |
| 3500 | gMC->Gspos("I021", 2,"I018", -1.0761, 0.0835,-2.8008, idrotm[339], "ONLY"); |
| 3501 | gMC->Gspos("I021", 3,"I018", -1.0761, 0.0835,-1.0492, idrotm[338], "ONLY"); |
| 3502 | gMC->Gspos("I021", 4,"I018", 1.0761, 0.0835,-2.8008, idrotm[337], "ONLY"); |
| 3503 | gMC->Gspos("I021", 5,"I018", 1.0761, 0.0835,-1.0492, idrotm[340], "ONLY"); |
| 3504 | gMC->Gspos("I021", 6,"I018", -1.0761, 0.0835, 0.8492, idrotm[339], "ONLY"); |
| 3505 | gMC->Gspos("I021", 7,"I018", -1.0761, 0.0835, 2.6008, idrotm[338], "ONLY"); |
| 3506 | gMC->Gspos("I021", 8,"I018", 1.0761, 0.0835, 0.8492, idrotm[337], "ONLY"); |
| 3507 | |
| 3508 | gMC->Gspos("I022", 1,"I018", 0.0, -1.79, 3.55, idrotm[312], "ONLY"); |
| 3509 | gMC->Gspos("I022", 2,"I018", 0.0, -1.79, -0.1, idrotm[312], "ONLY"); |
| 3510 | |
| 3511 | gMC->Gspos("I023", 1,"I018", 0.0, -1.79, 1.725, idrotm[341], "ONLY"); |
| 3512 | gMC->Gspos("I023", 2,"I018", 0.0, -1.79, -1.925, idrotm[341], "ONLY"); |
| 3513 | |
| 3514 | gMC->Gspos("I033", 1,"I018", 1.8, -1.75, 1.35, 0, "MANY"); |
| 3515 | gMC->Gspos("I033", 2,"I018", -1.8, -1.75, -2.65, idrotm[345], "MANY"); |
| 3516 | gMC->Gspos("I033", 3,"I018", -1.8, -1.75, 1.35, idrotm[345], "MANY"); |
| 3517 | gMC->Gspos("I033", 4,"I018", 1.8, -1.75, -2.65, 0, "MANY"); |
| 3518 | |
| 3519 | gMC->Gspos("I034", 1,"I018", 1.6, -1.775, 1.35, idrotm[312], "ONLY"); |
| 3520 | gMC->Gspos("I034", 2,"I018", -1.6, -1.775, -2.65, idrotm[348], "ONLY"); |
| 3521 | gMC->Gspos("I034", 3,"I018", -1.6, -1.775, 1.35, idrotm[348], "ONLY"); |
| 3522 | gMC->Gspos("I034", 4,"I018", 1.6, -1.775, -2.65, idrotm[312], "ONLY"); |
| 3523 | |
| 8f8273a4 |
3524 | gMC->Gspos("I035", 1,"I018", 1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "ONLY"); |
| 3525 | gMC->Gspos("I035", 2,"I018", -1.7, -0.55, iI018dits[2]-iI035dits[2], 0, "ONLY"); |
| 108bd0fe |
3526 | |
| 3527 | gMC->Gspos("I036", 1,"I018", 0.3087, 1.7191, 3.56, idrotm[346], "ONLY"); |
| 3528 | gMC->Gspos("I036", 2,"I018", 0.3087, 1.7191,-0.11, idrotm[346], "ONLY"); |
| 3529 | gMC->Gspos("I036", 3,"I018", -0.3087, 1.7191,-0.11, idrotm[347], "ONLY"); |
| 3530 | gMC->Gspos("I036", 4,"I018", -0.3087, 1.7191, 3.56, idrotm[347], "ONLY"); |
| 3531 | |
| 3532 | gMC->Gspos("I037", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY"); |
| 3533 | gMC->Gspos("I037", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY"); |
| 3534 | |
| 3535 | gMC->Gspos("I038", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY"); |
| 3536 | gMC->Gspos("I038", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY"); |
| 3537 | |
| 3538 | gMC->Gspos("I040", 1,"I018", 1.9204, -0.7118, 0.0, idrotm[346],"ONLY"); |
| 3539 | gMC->Gspos("I040", 2,"I018", -1.9204, -0.7118, 0.0, idrotm[347],"ONLY"); |
| 3540 | gMC->Gspos("I041", 1,"I018", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], idrotm[346], "ONLY"); |
| 3541 | gMC->Gspos("I041", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], idrotm[347], "ONLY"); |
| 3542 | |
| 3543 | |
| 3544 | // -- build block of the SDD electronics (heat bridge, chips, hybrid, anode microcable) |
| 3545 | |
| 3546 | xI050 = iSDDCoolPipe[0]+iSDDCoolPipe[1]*sin30+iI050dits[1]/cos30+iI041dits[1]; |
| 3547 | yI050 = 0; |
| 3548 | xI039 = -iSDDCoolPipe[1]/cos30; |
| 3549 | yI039 = -iI050dits[1]+iI039dits[1]; |
| 3550 | gMC->Gspos("I039", 1,"I050", xI039, yI039, 0.0, 0, "ONLY"); |
| 3551 | xI042 = xI039+iI039dits[0]-xI042space-iI042dits[0]; |
| 3552 | yI042 = yI039+iI039dits[1]+iI042dits[1]; |
| 3553 | xI043 = xI039-iI039dits[0]+xI043space+iI043dits[0]; |
| 3554 | yI043 = yI039+iI039dits[1]+iI043dits[1]; |
| 3555 | zChipSpace = iI042dits[2]; |
| 3556 | if (zChipSpace < iI043dits[2]) { |
| 3557 | zChipSpace = iI043dits[2]; |
| 3558 | } |
| 3559 | zChipSpace = zChipSpace * 2; |
| 3560 | yI051space = (2*iI039dits[2] - 4*zChipSpace)/5; |
| 3561 | zchip = -iI039dits[2] + yI051space + zChipSpace/2.; |
| 3562 | for (ichip=0; ichip<4; ichip++) { |
| 3563 | gMC->Gspos("I042", ichip+1, "I050", xI042, yI042, zchip, 0, "ONLY"); |
| 3564 | gMC->Gspos("I043", ichip+1, "I050", xI043, yI043, zchip, 0, "ONLY"); |
| 3565 | zchip += zChipSpace + yI051space; |
| 3566 | } |
| 3567 | xcap = 2*iI039dits[0]/5.; |
| 3568 | yI051 = yI039+iI039dits[1]+iI051dits[1]; |
| 3569 | zI051 = -iI039dits[2] + yI051space/3.; |
| 3570 | icap = 1; |
| 3571 | for (ichip=0; ichip<5; ichip++) { |
| 3572 | xI051 = xI039-iI039dits[0]+xcap; |
| 3573 | gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY"); |
| 3574 | zI051 += yI051space/3.; |
| 3575 | gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY"); |
| 3576 | xI051 += xcap; |
| 3577 | gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY"); |
| 3578 | xI051 += xcap; |
| 3579 | gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY"); |
| 3580 | xI051 += xcap; |
| 3581 | gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY"); |
| 3582 | zI051 -= yI051space/3.; |
| 3583 | if (ichip == 0) { |
| 3584 | gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY"); |
| 3585 | } |
| 3586 | zI051 += zChipSpace + yI051space; |
| 3587 | } |
| 3588 | xI052 = -iI050dits[0]+iI052dits[0]; |
| 3589 | yI052 = yI051+iI051dits[1]+iI052dits[1]; |
| 3590 | gMC->Gspos("I052", 1,"I050", xI052, yI052, 0.0, 0, "ONLY"); |
| 3591 | xI044 = iI050dits[0]-iI044dits[3]; |
| 3592 | yI044 = yI052+iI052dits[1]+iI044dits[2]; |
| 3593 | gMC->Gspos("I044", 1,"I050", xI044, yI044, 0.0, idrotm[301], "ONLY"); |
| 3594 | gMC->Gspos("I050", 1,"I018", xI050, yI050, 0.0, idrotm[346],"ONLY"); |
| 3595 | gMC->Gspos("I050", 2,"I018", -xI050, yI050, 0.0, idrotm[347],"ONLY"); |
| 3596 | |
| 3597 | |
| 3598 | // -- build block of the SDD ladder frame at the end ladders |
| 3599 | |
| 3600 | gMC->Gspos("I021",12,"I024", 1.0761, 0.0836,-0.1242, idrotm[340], "ONLY"); |
| 3601 | gMC->Gspos("I021",11,"I024", -1.0761, 0.0836,-0.1242, idrotm[338], "ONLY"); |
| 3602 | gMC->Gspos("I021",13,"I024", -1.0761, 0.0836,-1.8758, idrotm[339], "ONLY"); |
| 3603 | gMC->Gspos("I021",14,"I024", 1.0761, 0.0836,-1.8758, idrotm[337], "ONLY"); |
| 3604 | |
| 3605 | gMC->Gspos("I022", 3,"I024", 0.0, -1.7899, 0.825, idrotm[312], "ONLY"); |
| 3606 | |
| 3607 | gMC->Gspos("I023", 3,"I024", 0.0, -1.7899,-1.0, idrotm[341], "ONLY"); |
| 3608 | |
| 3609 | gMC->Gspos("I025", 1,"I024", -1.9, -1.7349, 0.0, idrotm[344], "ONLY"); |
| 3610 | gMC->Gspos("I025", 2,"I024", 1.987, -1.5842, 0.0, idrotm[343], "ONLY"); |
| 3611 | |
| 3612 | gMC->Gspos("I026", 1,"I024", -1.9782, -1.5689, 0.0, idrotm[342], "ONLY"); |
| 3613 | gMC->Gspos("I026", 2,"I024", 1.8824, -1.7349, 0.0, idrotm[344], "ONLY"); |
| 3614 | |
| 3615 | gMC->Gspos("I029", 1,"I024", -0.087, 1.7067, iI029dits[2]-iI024dits[2], idrotm[342], "ONLY"); |
| 3616 | |
| 3617 | gMC->Gspos("I030", 1,"I024", 0.0958, 1.6914, iI030dits[2]-iI024dits[2], idrotm[343], "ONLY"); |
| 3618 | |
| 3619 | gMC->Gspos("I031", 1,"I024", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY"); |
| 3620 | gMC->Gspos("I031", 2,"I024", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY"); |
| 3621 | |
| 3622 | gMC->Gspos("I032", 1,"I024", iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY"); |
| 3623 | gMC->Gspos("I032", 2,"I024", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY"); |
| 3624 | |
| 3625 | |
| 3626 | xI424 = iI028dits[0]/3.; |
| 3627 | yI424 = -iI028dits[1]+iI424dits[1]; |
| 3628 | gMC->Gspos("I422", 1,"I421", 0.0, 0.0, 0.0, 0, "ONLY"); |
| 3629 | gMC->Gspos("I423", 1,"I421", 0.0, 0.0, iI421dits[2]-iI423dits[2], 0, "ONLY"); |
| 3630 | gMC->Gspos("I421", 1,"I420", 0.0, 0.0, 0.0, idrotm[312], "ONLY"); |
| 3631 | gMC->Gspos("I420", 1,"I028", -iI028dits[0]/3., iI028dits[1]-iI420dits[1], 0.0, 0, "ONLY"); |
| 3632 | gMC->Gspos("I424", 1,"I028", xI424, yI424, 0.0, 0, "ONLY"); |
| 8f8273a4 |
3633 | gMC->Gspos("I028", 1,"I024", 0.0, iI028dits[1]-iI024dits[1], iI024dits[2]-iI028dits[2], 0, "ONLY"); |
| 108bd0fe |
3634 | |
| 3635 | |
| 3636 | // -- build the SDD ladder 3 |
| 3637 | |
| 3638 | indI425 = 1; |
| 3639 | gMC->Gspos("I024", 1,"I047", 0.0, 0.0, 24.625, 0, "ONLY"); |
| 3640 | gMC->Gspos("I018", 1,"I047", 0.0, 0.0, 3.65, 0, "ONLY"); |
| 3641 | gMC->Gspos("I018", 2,"I047", 0.0, 0.0, 10.95, 0, "ONLY"); |
| 3642 | gMC->Gspos("I018", 3,"I047", 0.0, 0.0, 18.25, 0, "ONLY"); |
| 3643 | gMC->Gspos("I018", 4,"I047", 0.0, 0.0, -3.65, 0, "ONLY"); |
| 3644 | gMC->Gspos("I018", 5,"I047", 0.0, 0.0, -10.95, 0, "ONLY"); |
| 3645 | gMC->Gspos("I018", 6,"I047", 0.0, 0.0, -18.25, 0, "ONLY"); |
| 3646 | gMC->Gspos("I024", 2,"I047", 0.0, 0.0, -24.625, idrotm[355], "ONLY"); |
| 3647 | nameHV[0] = 'I'; |
| 3648 | nameHV[1] = '3'; |
| 3649 | nameHV[2] = '1'; |
| 3650 | nameHV[4] = '\0'; |
| 3651 | for (iSDD=0; iSDD<3; iSDD++) { |
| 3652 | nameHV[3] = (Char_t)(48+iSDD+5); |
| 3653 | dits[0] = 1.350000; |
| 3654 | dits[1] = iI425dits[1]; |
| 3655 | dits[2] = (iI047dits[2] - 2*iI024dits[2] - zSDDlay3[iSDD])/2.; |
| 3656 | gMC->Gsvolu(nameHV, "BOX ", idtmed[279], dits, 3); |
| 3657 | xHV = 0.0; |
| 3658 | yHV = -iI047dits[1] + (2*iSDD+1)*dits[1]; |
| 3659 | zHV = iI047dits[2] - 2*iI024dits[2] - dits[2]; |
| 3660 | gMC->Gspos(nameHV, 1,"I047", xHV, yHV, zHV, 0, "ONLY"); |
| 3661 | gMC->Gspos(nameHV, 2,"I047", xHV, yHV, -zHV, 0, "ONLY"); |
| 3662 | gMC->Gspos("I425", indI425++,"I047", xI424, yHV, 24.625, 0, "ONLY"); |
| 3663 | gMC->Gspos("I425", indI425++,"I047", -xI424, yHV, -24.625, 0, "ONLY"); |
| 3664 | } |
| 3665 | nameLV[0] = 'I'; |
| 3666 | nameLV[1] = '3'; |
| 3667 | nameLV[2] = '1'; |
| 3668 | nameLV[4] = '\0'; |
| 3669 | for (iSDD=0; iSDD<3; iSDD++) { |
| 3670 | nameLV[3] = (Char_t)(48+iSDD+1); |
| 3671 | dits[0] = 1.350000; |
| 3672 | dits[1] = 0.004423; |
| 3673 | dits[2] = (iI047dits[2] - (2*iSDD+1)*iI018dits[2] - iI039dits[2])/2.; |
| 3674 | gMC->Gsvolu(nameLV, "BOX ", idtmed[280], dits, 3); |
| 3675 | yLV = iI018dits[1] - dits[0]*cos30 - dits[1]*sin30; |
| 3676 | xLV = xI050 - |
| 3677 | TMath::Abs(yI050-yLV)*sin30/cos30 + |
| 3678 | (iI050dits[1]+(2*iSDD+1)*dits[1])/cos30; |
| 3679 | zLV = iI047dits[2] - dits[2]; |
| 3680 | gMC->Gspos(nameLV, 1,"I047", xLV, yLV, zLV, idrotm[346], "ONLY"); |
| 3681 | gMC->Gspos(nameLV, 2,"I047", xLV, yLV, -zLV, idrotm[346], "ONLY"); |
| 3682 | gMC->Gspos(nameLV, 3,"I047", -xLV, yLV, zLV, idrotm[347], "ONLY"); |
| 3683 | gMC->Gspos(nameLV, 4,"I047", -xLV, yLV, -zLV, idrotm[347], "ONLY"); |
| 3684 | } |
| 3685 | |
| 3686 | |
| 3687 | // -- build the SDD ladder 4 |
| 3688 | |
| 3689 | |
| 3690 | gMC->Gspos("I024", 3,"I048", -0.0001, 0.0, 31.925, 0, "ONLY"); |
| 3691 | gMC->Gspos("I018", 7,"I048", -0.0001, 0.0, -3.65, 0, "ONLY"); |
| 3692 | gMC->Gspos("I018", 8,"I048", -0.0001, 0.0, 3.65, 0, "ONLY"); |
| 3693 | gMC->Gspos("I018", 9,"I048", -0.0001, 0.0, 10.95, 0, "ONLY"); |
| 3694 | gMC->Gspos("I018",10,"I048", -0.0001, 0.0, 18.25, 0, "ONLY"); |
| 3695 | gMC->Gspos("I018",11,"I048", -0.0001, 0.0, 25.55, 0, "ONLY"); |
| 3696 | gMC->Gspos("I018",12,"I048", -0.0001, 0.0, -10.95, 0, "ONLY"); |
| 3697 | gMC->Gspos("I018",13,"I048", -0.0001, 0.0, -18.25, 0, "ONLY"); |
| 3698 | gMC->Gspos("I018",14,"I048", -0.0001, 0.0, -25.55, 0, "ONLY"); |
| 3699 | gMC->Gspos("I024", 4,"I048", -0.0001, 0.0, -31.925, idrotm[355], "ONLY"); |
| 3700 | nameHV[0] = 'I'; |
| 3701 | nameHV[1] = '4'; |
| 3702 | nameHV[2] = '1'; |
| 3703 | nameHV[4] = '\0'; |
| 3704 | for (iSDD=0; iSDD<4; iSDD++) { |
| 3705 | nameHV[3] = (Char_t)(48+iSDD+5); |
| 3706 | dits[0] = 1.350000; |
| 3707 | dits[1] = iI425dits[1]; |
| 3708 | dits[2] = (iI048dits[2] - 2*iI024dits[2] - zSDDlay4[iSDD])/2.; |
| 3709 | gMC->Gsvolu(nameHV, "BOX ", idtmed[279], dits, 3); |
| 3710 | xHV = -0.0001; |
| 3711 | yHV = -iI048dits[1] + (2*iSDD+1)*dits[1]; |
| 3712 | zHV = iI048dits[2] - 2*iI024dits[2] - dits[2]; |
| 3713 | gMC->Gspos(nameHV, 1,"I048", xHV, yHV, zHV, 0, "ONLY"); |
| 3714 | gMC->Gspos(nameHV, 2,"I048", xHV, yHV, -zHV, 0, "ONLY"); |
| 3715 | gMC->Gspos("I425", indI425++,"I048", xI424, yHV, 31.925, 0, "ONLY"); |
| 3716 | gMC->Gspos("I425", indI425++,"I048", -xI424, yHV, -31.925, 0, "ONLY"); |
| 3717 | } |
| 3718 | nameLV[0] = 'I'; |
| 3719 | nameLV[1] = '4'; |
| 3720 | nameLV[2] = '1'; |
| 3721 | nameLV[4] = '\0'; |
| 3722 | for (iSDD=0; iSDD<4; iSDD++) { |
| 3723 | nameLV[3] = (Char_t)(48+iSDD+1); |
| 3724 | dits[0] = 1.350000; |
| 3725 | dits[1] = 0.004423; |
| 3726 | dits[2] = (iI048dits[2] - (2*iSDD+1)*iI018dits[2] - iI039dits[2])/2.; |
| 3727 | gMC->Gsvolu(nameLV, "BOX ", idtmed[280], dits, 3); |
| 3728 | yLV = iI018dits[1] - dits[0]*cos30 - dits[1]*sin30; |
| 3729 | xLV = xI050 - |
| 3730 | TMath::Abs(yI050-yLV)*sin30/cos30 + |
| 3731 | (iI050dits[1]+(2*iSDD+1)*dits[1])/cos30; |
| 3732 | zLV = iI048dits[2] - dits[2]; |
| 3733 | gMC->Gspos(nameLV, 1,"I048", xLV, yLV, zLV, idrotm[346], "ONLY"); |
| 3734 | gMC->Gspos(nameLV, 2,"I048", xLV, yLV, -zLV, idrotm[346], "ONLY"); |
| 3735 | gMC->Gspos(nameLV, 3,"I048", -xLV, yLV, zLV, idrotm[347], "ONLY"); |
| 3736 | gMC->Gspos(nameLV, 4,"I048", -xLV, yLV, -zLV, idrotm[347], "ONLY"); |
| 3737 | } |
| 3738 | |
| 3739 | |
| 3740 | // -- build the SDD barrel (layers 3 and 4) |
| 3741 | |
| 3742 | gMC->Gspos("I047", 1,"IT34", -3.7528, 16.4422, 0.0, idrotm[321], "ONLY"); |
| 3743 | gMC->Gspos("I047", 2,"IT34",-10.8892, 13.6547, 0.0, idrotm[333], "ONLY"); |
| 3744 | gMC->Gspos("I047", 3,"IT34",-15.1948, 7.3175, 0.0, idrotm[336], "ONLY"); |
| 3745 | gMC->Gspos("I047", 4,"IT34",-17.465, 0.0, 0.0, idrotm[350], "ONLY"); |
| 3746 | gMC->Gspos("I047", 5,"IT34",-15.1948, -7.3174, 0.0, idrotm[313], "ONLY"); |
| 3747 | gMC->Gspos("I047", 6,"IT34",-10.8893, -13.6547, 0.0, idrotm[311], "ONLY"); |
| 3748 | gMC->Gspos("I047", 7,"IT34", -3.7528, -16.4422, 0.0, idrotm[310], "ONLY"); |
| 3749 | gMC->Gspos("I047", 8,"IT34", 3.8863, -17.0271, 0.0, idrotm[386], "ONLY"); |
| 3750 | gMC->Gspos("I047", 9,"IT34", 10.5152, -13.1856, 0.0, idrotm[309], "ONLY"); |
| 3751 | gMC->Gspos("I047",10,"IT34", 15.7354, -7.5778, 0.0, idrotm[308], "ONLY"); |
| 3752 | gMC->Gspos("I047",11,"IT34", 16.865, 0.0, 0.0, idrotm[356], "ONLY"); |
| 3753 | gMC->Gspos("I047",12,"IT34", 15.7354, 7.5778, 0.0, idrotm[307], "ONLY"); |
| 3754 | gMC->Gspos("I047",13,"IT34", 10.5152, 13.1856, 0.0, idrotm[306], "ONLY"); |
| 3755 | gMC->Gspos("I047",14,"IT34", 3.8863, 17.0271, 0.0, idrotm[305], "ONLY"); |
| 3756 | |
| 3757 | gMC->Gspos("I048", 1,"IT34", -3.6667, 25.5027, 0.0, idrotm[335], "ONLY"); |
| 3758 | gMC->Gspos("I048", 2,"IT34",-10.9317, 23.937, 0.0, idrotm[332], "ONLY"); |
| 3759 | gMC->Gspos("I048", 3,"IT34",-16.8725, 19.4719, 0.0, idrotm[331], "ONLY"); |
| 3760 | gMC->Gspos("I048", 4,"IT34",-22.1376, 14.227, 0.0, idrotm[366], "ONLY"); |
| 3761 | gMC->Gspos("I048", 5,"IT34",-24.7213, 7.2588, 0.0, idrotm[330], "ONLY"); |
| 3762 | gMC->Gspos("I048", 6,"IT34",-26.315, 0.0, 0.0, idrotm[350], "ONLY"); |
| 3763 | gMC->Gspos("I048", 7,"IT34",-24.7213, -7.2588, 0.0, idrotm[329], "ONLY"); |
| 3764 | gMC->Gspos("I048", 8,"IT34",-22.1376, -14.227, 0.0, idrotm[328], "ONLY"); |
| 3765 | gMC->Gspos("I048", 9,"IT34",-16.8725, -19.4719, 0.0, idrotm[327], "ONLY"); |
| 3766 | gMC->Gspos("I048",10,"IT34",-10.9316, -23.937, 0.0, idrotm[326], "ONLY"); |
| 3767 | gMC->Gspos("I048",11,"IT34", -3.6667, -25.5027, 0.0, idrotm[325], "ONLY"); |
| 3768 | gMC->Gspos("I048",12,"IT34", 3.745, -26.0472, 0.0, idrotm[324], "ONLY"); |
| 3769 | gMC->Gspos("I048",13,"IT34", 10.7032, -23.4367, 0.0, idrotm[323], "ONLY"); |
| 3770 | gMC->Gspos("I048",14,"IT34", 17.2327, -19.8876, 0.0, idrotm[322], "ONLY"); |
| 3771 | gMC->Gspos("I048",15,"IT34", 21.6749, -13.9296, 0.0, idrotm[320], "ONLY"); |
| 3772 | gMC->Gspos("I048",16,"IT34", 25.2491, -7.4138, 0.0, idrotm[319], "ONLY"); |
| 3773 | gMC->Gspos("I048",17,"IT34", 25.765, 0.0, 0.0, idrotm[318], "ONLY"); |
| 3774 | gMC->Gspos("I048",18,"IT34", 25.2491, 7.4138, 0.0, idrotm[317], "ONLY"); |
| 3775 | gMC->Gspos("I048",19,"IT34", 21.6749, 13.9296, 0.0, idrotm[316], "ONLY"); |
| 3776 | gMC->Gspos("I048",20,"IT34", 17.2327, 19.8876, 0.0, idrotm[315], "ONLY"); |
| 3777 | gMC->Gspos("I048",21,"IT34", 10.7032, 23.4367, 0.0, idrotm[314], "ONLY"); |
| 3778 | gMC->Gspos("I048",22,"IT34", 3.745, 26.0472, 0.0, idrotm[334], "ONLY"); |
| 3779 | } |
| 3780 | |
| 3781 | // --- Place SSD volumes into their mother volume IT56 |
| 3782 | |
| 3783 | if (! AliITSInitGeometry::SSDIsTGeoNative()) { |
| 3784 | |
| 3785 | gMC->Gspos("I570",14,"IT56",-28.0681,-36.0619,-0.27,idrotm[566],"ONLY"); |
| 3786 | gMC->Gspos("I570",15,"IT56",-21.677,-40.0556,-0.27,idrotm[567],"ONLY"); |
| 3787 | gMC->Gspos("I570",16,"IT56",-14.838,-43.2217,-0.27,idrotm[568],"ONLY"); |
| 3788 | gMC->Gspos("I570",17,"IT56",-7.4965,-44.9238,-0.27,idrotm[569],"ONLY"); |
| 3789 | gMC->Gspos("I570",18,"IT56",-0.27,-45.6977,-0.27,idrotm[533],"ONLY"); |
| 3790 | gMC->Gspos("I570",19,"IT56",7.4965,-44.9238,-0.27,idrotm[534],"ONLY"); |
| 3791 | gMC->Gspos("I570",20,"IT56",14.838,-43.2217,-0.27,idrotm[535],"ONLY"); |
| 3792 | gMC->Gspos("I570",21,"IT56",21.677,-40.0556,-0.27,idrotm[623],"ONLY"); |
| 3793 | gMC->Gspos("I570",22,"IT56",28.0681,-36.0619,-0.27,idrotm[537],"ONLY"); |
| 3794 | gMC->Gspos("I570",23,"IT56",33.5085,-30.8468,-0.27,idrotm[538],"ONLY"); |
| 3795 | gMC->Gspos("I570",24,"IT56",38.2566,-24.9943,-0.27,idrotm[539],"ONLY"); |
| 3796 | gMC->Gspos("I570",25,"IT56",41.7089,-18.2952,-0.27,idrotm[540],"ONLY"); |
| 3797 | gMC->Gspos("I570",26,"IT56",44.2994,-11.2181,-0.27,idrotm[541],"ONLY"); |
| 3798 | gMC->Gspos("I570",27,"IT56",45.3894,-3.7611,-0.27,idrotm[542],"ONLY"); |
| 3799 | gMC->Gspos("I570",28,"IT56",45.5416,3.7737,-0.27,idrotm[543],"ONLY"); |
| 3800 | gMC->Gspos("I570",29,"IT56",44.1513,11.1806,-0.27,idrotm[544],"ONLY"); |
| 3801 | gMC->Gspos("I570",30,"IT56",41.8487,18.3566,-0.27,idrotm[545],"ONLY"); |
| 3802 | gMC->Gspos("I570",31,"IT56",38.1287,24.9107,-0.27,idrotm[546],"ONLY"); |
| 3803 | gMC->Gspos("I570",32,"IT56",33.6209,30.9502,-0.27,idrotm[547],"ONLY"); |
| 3804 | gMC->Gspos("I570",33,"IT56",27.9743,35.9414,-0.27,idrotm[548],"ONLY"); |
| 3805 | gMC->Gspos("I570",34,"IT56",21.7497,40.1899,-0.27,idrotm[549],"ONLY"); |
| 3806 | gMC->Gspos("I570",35,"IT56",14.7884,43.0772,-0.27,idrotm[550],"ONLY"); |
| 3807 | gMC->Gspos("I570",36,"IT56",7.5216,45.0744,-0.27,idrotm[551],"ONLY"); |
| 3808 | gMC->Gspos("I570",37,"IT56",0.00,45.545,-0.27,0,"ONLY"); |
| 3809 | gMC->Gspos("I570",38,"IT56",-7.5216,45.0744,-0.27,idrotm[552],"ONLY"); |
| 3810 | gMC->Gspos("I570",1,"IT56",-14.7884,43.0772,-0.27,idrotm[553],"ONLY"); |
| 3811 | gMC->Gspos("I570",2,"IT56",-21.7497,40.1899,-0.27,idrotm[620],"ONLY"); |
| 3812 | gMC->Gspos("I570",3,"IT56",-27.9743,35.9414,-0.27,idrotm[555],"ONLY"); |
| 3813 | gMC->Gspos("I570",4,"IT56",-33.6209,30.9502,-0.27,idrotm[556],"ONLY"); |
| 3814 | gMC->Gspos("I570",5,"IT56",-38.1287,24.9108,-0.27,idrotm[557],"ONLY"); |
| 3815 | gMC->Gspos("I570",6,"IT56",-41.8487,18.3566,-0.27,idrotm[558],"ONLY"); |
| 3816 | gMC->Gspos("I570",7,"IT56",-44.1513,11.1806,-0.27,idrotm[559],"ONLY"); |
| 3817 | gMC->Gspos("I570",8,"IT56",-45.5416,3.7737,-0.27,idrotm[560],"ONLY"); |
| 3818 | gMC->Gspos("I570",9,"IT56",-45.3894,-3.7611,-0.27,idrotm[561],"ONLY"); |
| 3819 | gMC->Gspos("I570",10,"IT56",-44.2994,-11.2181,-0.27,idrotm[562],"ONLY"); |
| 3820 | gMC->Gspos("I570",11,"IT56",-41.7089,-18.2952,-0.27,idrotm[563],"ONLY"); |
| 3821 | gMC->Gspos("I570",12,"IT56",-38.2566,-24.9943,-0.27,idrotm[564],"ONLY"); |
| 3822 | gMC->Gspos("I570",13,"IT56",-33.5086,-30.8468,-0.27,idrotm[565],"ONLY"); |
| 3823 | gMC->Gspos("I569",8,"IT56",-43.5484,3.6085,0.0,idrotm[560],"ONLY"); |
| 3824 | gMC->Gspos("I569",9,"IT56",-43.3963,-3.5959,0.0,idrotm[561],"ONLY"); |
| 3825 | gMC->Gspos("I569",10,"IT56",-42.3606,-10.7271,0.0,idrotm[562],"ONLY"); |
| 3826 | gMC->Gspos("I569",11,"IT56",-39.8773,-17.4918,0.0,idrotm[563],"ONLY"); |
| 3827 | gMC->Gspos("I569",12,"IT56",-36.5823,-23.9004,0.0,idrotm[564],"ONLY"); |
| 3828 | gMC->Gspos("I569",13,"IT56",-32.0371,-29.4922,0.0,idrotm[565],"ONLY"); |
| 3829 | gMC->Gspos("I569",14,"IT56",-26.8397,-34.4836,0.0,idrotm[566],"ONLY"); |
| 3830 | gMC->Gspos("I569",15,"IT56",-20.7251,-38.2967,0.0,idrotm[567],"ONLY"); |
| 3831 | gMC->Gspos("I569",16,"IT56",-14.1886,-41.33,0.0,idrotm[568],"ONLY"); |
| 3832 | gMC->Gspos("I569",17,"IT56",-7.1673,-42.9511,0.0,idrotm[569],"ONLY"); |
| 3833 | gMC->Gspos("I569",18,"IT56",0.0,-43.6977,0.0,idrotm[533],"ONLY"); |
| 3834 | gMC->Gspos("I569",19,"IT56",7.1673,-42.9511,0.0,idrotm[534],"ONLY"); |
| 3835 | gMC->Gspos("I569",20,"IT56",14.1886,-41.33,0.0,idrotm[535],"ONLY"); |
| 3836 | gMC->Gspos("I569",21,"IT56",20.7251,-38.2967,0.0,idrotm[623],"ONLY"); |
| 3837 | gMC->Gspos("I569",22,"IT56",26.8397,-34.4836,0.0,idrotm[537],"ONLY"); |
| 3838 | gMC->Gspos("I569",23,"IT56",32.0371,-29.4922,0.0,idrotm[538],"ONLY"); |
| 3839 | gMC->Gspos("I569",24,"IT56",36.5822,-23.9004,0.0,idrotm[539],"ONLY"); |
| 3840 | gMC->Gspos("I569",25,"IT56",39.8773,-17.4918,0.0,idrotm[540],"ONLY"); |
| 3841 | gMC->Gspos("I569",26,"IT56",42.3606,-10.7272,0.0,idrotm[541],"ONLY"); |
| 3842 | gMC->Gspos("I569",27,"IT56",43.3963,-3.5959,0.0,idrotm[542],"ONLY"); |
| 3843 | gMC->Gspos("I569",28,"IT56",43.5484,3.6085,0.0,idrotm[543],"ONLY"); |
| 3844 | gMC->Gspos("I569",29,"IT56",42.2125,10.6897,0.0,idrotm[544],"ONLY"); |
| 3845 | gMC->Gspos("I569",30,"IT56",40.0172,17.5532,0.0,idrotm[545],"ONLY"); |
| 3846 | gMC->Gspos("I569",31,"IT56",36.4544,23.8169,0.0,idrotm[546],"ONLY"); |
| 3847 | gMC->Gspos("I569",32,"IT56",32.1494,29.5956,0.0,idrotm[547],"ONLY"); |
| 3848 | gMC->Gspos("I569",33,"IT56",26.7459,34.3631,0.0,idrotm[548],"ONLY"); |
| 3849 | gMC->Gspos("I569",34,"IT56",20.7978,38.431,0.0,idrotm[549],"ONLY"); |
| 3850 | gMC->Gspos("I569",35,"IT56",14.139,41.1856,0.0,idrotm[550],"ONLY"); |
| 3851 | gMC->Gspos("I569",36,"IT56",7.1924,43.1017,0.0,idrotm[551],"ONLY"); |
| 3852 | gMC->Gspos("I569",37,"IT56",0.0,43.545,0.0,0,"ONLY"); |
| 3853 | gMC->Gspos("I569",38,"IT56",-7.1924,43.1017,0.0,idrotm[552],"ONLY"); |
| 3854 | gMC->Gspos("I569",1,"IT56",-14.139,41.1856,0.0,idrotm[553],"ONLY"); |
| 3855 | gMC->Gspos("I569",2,"IT56",-20.7978,38.431,0.0,idrotm[620],"ONLY"); |
| 3856 | gMC->Gspos("I569",3,"IT56",-26.7459,34.3631,0.0,idrotm[555],"ONLY"); |
| 3857 | gMC->Gspos("I569",4,"IT56",-32.1494,29.5956,0.0,idrotm[556],"ONLY"); |
| 3858 | gMC->Gspos("I569",5,"IT56",-36.4544,23.8169,0.0,idrotm[557],"ONLY"); |
| 3859 | gMC->Gspos("I569",6,"IT56",-40.0172,17.5532,0.0,idrotm[558],"ONLY"); |
| 3860 | gMC->Gspos("I569",7,"IT56",-42.2125,10.6897,0.0,idrotm[559],"ONLY"); |
| 3861 | gMC->Gspos("I571",15,"IT56",-21.2916,-34.387,0.0,idrotm[501],"ONLY"); |
| 3862 | gMC->Gspos("I571",14,"IT56",-27.351,-30.0026,0.0,idrotm[503],"ONLY"); |
| 3863 | gMC->Gspos("I571",13,"IT56",-32.2758,-24.3735,0.0,idrotm[504],"ONLY"); |
| 3864 | gMC->Gspos("I571",12,"IT56",-36.3422,-18.0963,0.0,idrotm[505],"ONLY"); |
| 3865 | gMC->Gspos("I571",11,"IT56",-38.901,-11.0683,0.0,idrotm[506],"ONLY"); |
| 3866 | gMC->Gspos("I571",10,"IT56",-40.4252,-3.7459,0.0,idrotm[507],"ONLY"); |
| 3867 | gMC->Gspos("I571",9,"IT56",-40.2725,3.7318,0.0,idrotm[508],"ONLY"); |
| 3868 | gMC->Gspos("I571",8,"IT56",-39.0486,11.1103,0.0,idrotm[509],"ONLY"); |
| 3869 | gMC->Gspos("I571",7,"IT56",-36.2049,18.0279,0.0,idrotm[510],"ONLY"); |
| 3870 | gMC->Gspos("I571",6,"IT56",-32.3982,24.466,0.0,idrotm[511],"ONLY"); |
| 3871 | gMC->Gspos("I571",5,"IT56",-27.2476,29.8892,0.0,idrotm[512],"ONLY"); |
| 3872 | gMC->Gspos("I571",4,"IT56",-21.3723,34.5175,0.0,idrotm[513],"ONLY"); |
| 3873 | gMC->Gspos("I571",3,"IT56",-14.6104,37.7138,0.0,idrotm[653],"ONLY"); |
| 3874 | gMC->Gspos("I571",2,"IT56",-7.4599,39.9072,0.0,idrotm[514],"ONLY"); |
| 3875 | gMC->Gspos("I571",1,"IT56",0.0,40.445,0.0,0,"ONLY"); |
| 3876 | gMC->Gspos("I571",34,"IT56",7.46,39.9071,0.0,idrotm[515],"ONLY"); |
| 3877 | gMC->Gspos("I571",33,"IT56",14.6104,37.7138,0.0,idrotm[516],"ONLY"); |
| 3878 | gMC->Gspos("I571",32,"IT56",21.3723,34.5175,0.0,idrotm[517],"ONLY"); |
| 3879 | gMC->Gspos("I571",31,"IT56",27.2476,29.8892,0.0,idrotm[518],"ONLY"); |
| 3880 | gMC->Gspos("I571",30,"IT56",32.3983,24.466,0.0,idrotm[519],"ONLY"); |
| 3881 | gMC->Gspos("I571",29,"IT56",36.2049,18.0279,0.0,idrotm[520],"ONLY"); |
| 3882 | gMC->Gspos("I571",28,"IT56",39.0486,11.1103,0.0,idrotm[521],"ONLY"); |
| 3883 | gMC->Gspos("I571",27,"IT56",40.2725,3.7318,0.0,idrotm[522],"ONLY"); |
| 3884 | gMC->Gspos("I571",26,"IT56",40.4252,-3.746,0.0,idrotm[523],"ONLY"); |
| 3885 | gMC->Gspos("I571",25,"IT56",38.901,-11.0683,0.0,idrotm[524],"ONLY"); |
| 3886 | gMC->Gspos("I571",24,"IT56",36.3422,-18.0963,0.0,idrotm[525],"ONLY"); |
| 3887 | gMC->Gspos("I571",23,"IT56",32.2758,-24.3736,0.0,idrotm[526],"ONLY"); |
| 3888 | gMC->Gspos("I571",22,"IT56",27.351,-30.0026,0.0,idrotm[527],"ONLY"); |
| 3889 | gMC->Gspos("I571",21,"IT56",21.2915,-34.387,0.0,idrotm[528],"ONLY"); |
| 3890 | gMC->Gspos("I571",20,"IT56",14.6658,-37.8569,0.0,idrotm[618],"ONLY"); |
| 3891 | gMC->Gspos("I571",19,"IT56",7.4317,-39.7563,0.0,idrotm[529],"ONLY"); |
| 3892 | gMC->Gspos("I571",18,"IT56",0.0,-40.5984,0.0,idrotm[533],"ONLY"); |
| 3893 | gMC->Gspos("I571",17,"IT56",-7.4318,-39.7563,0.0,idrotm[530],"ONLY"); |
| 3894 | gMC->Gspos("I571",16,"IT56",-14.6659,-37.8569,0.0,idrotm[531],"ONLY"); |
| 3895 | gMC->Gspos("I565",13,"IT56",-30.6798,-23.1683,0.0,idrotm[504],"ONLY"); |
| 3896 | gMC->Gspos("I565",12,"IT56",-34.5519,-17.2048,0.0,idrotm[505],"ONLY"); |
| 3897 | gMC->Gspos("I565",11,"IT56",-36.9774,-10.521,0.0,idrotm[506],"ONLY"); |
| 3898 | gMC->Gspos("I565",10,"IT56",-38.4338,-3.5614,0.0,idrotm[507],"ONLY"); |
| 3899 | gMC->Gspos("I565",9,"IT56",-38.281,3.5473,0.0,idrotm[508],"ONLY"); |
| 3900 | gMC->Gspos("I565",8,"IT56",-37.1249,10.563,0.0,idrotm[509],"ONLY"); |
| 3901 | gMC->Gspos("I565",7,"IT56",-34.4146,17.1364,0.0,idrotm[510],"ONLY"); |
| 3902 | gMC->Gspos("I565",6,"IT56",-30.8022,23.2608,0.0,idrotm[511],"ONLY"); |
| 3903 | gMC->Gspos("I565",5,"IT56",-25.9002,28.4112,0.0,idrotm[512],"ONLY"); |
| 3904 | gMC->Gspos("I565",4,"IT56",-20.3195,32.817,0.0,idrotm[513],"ONLY"); |
| 3905 | gMC->Gspos("I565",3,"IT56",-13.8879,35.8489,0.0,idrotm[653],"ONLY"); |
| 3906 | gMC->Gspos("I565",2,"IT56",-7.0924,37.9412,0.0,idrotm[514],"ONLY"); |
| 3907 | gMC->Gspos("I565",1,"IT56",0.0,38.445,0.0,0,"ONLY"); |
| 3908 | gMC->Gspos("I565",34,"IT56",7.0925,37.9412,0.0,idrotm[515],"ONLY"); |
| 3909 | gMC->Gspos("I565",33,"IT56",13.888,35.8489,0.0,idrotm[516],"ONLY"); |
| 3910 | gMC->Gspos("I565",32,"IT56",20.3195,32.817,0.0,idrotm[517],"ONLY"); |
| 3911 | gMC->Gspos("I565",31,"IT56",25.9002,28.4112,0.0,idrotm[518],"ONLY"); |
| 3912 | gMC->Gspos("I565",30,"IT56",30.8022,23.2607,0.0,idrotm[519],"ONLY"); |
| 3913 | gMC->Gspos("I565",29,"IT56",34.4146,17.1364,0.0,idrotm[520],"ONLY"); |
| 3914 | gMC->Gspos("I565",28,"IT56",37.125,10.5629,0.0,idrotm[521],"ONLY"); |
| 3915 | gMC->Gspos("I565",27,"IT56",38.281,3.5472,0.0,idrotm[522],"ONLY"); |
| 3916 | gMC->Gspos("I565",26,"IT56",38.4338,-3.5614,0.0,idrotm[523],"ONLY"); |
| 3917 | gMC->Gspos("I565",25,"IT56",36.9774,-10.521,0.0,idrotm[524],"ONLY"); |
| 3918 | gMC->Gspos("I565",24,"IT56",34.5519,-17.2048,0.0,idrotm[525],"ONLY"); |
| 3919 | gMC->Gspos("I565",23,"IT56",30.6798,-23.1683,0.0,idrotm[526],"ONLY"); |
| 3920 | gMC->Gspos("I565",22,"IT56",26.0036,-28.5246,0.0,idrotm[527],"ONLY"); |
| 3921 | gMC->Gspos("I565",21,"IT56",20.2387,-32.6866,0.0,idrotm[528],"ONLY"); |
| 3922 | gMC->Gspos("I565",20,"IT56",13.9433,-35.992,0.0,idrotm[618],"ONLY"); |
| 3923 | gMC->Gspos("I565",19,"IT56",7.0642,-37.7904,0.0,idrotm[529],"ONLY"); |
| 3924 | gMC->Gspos("I565",18,"IT56",0.0,-38.5984,0.0,idrotm[533],"ONLY"); |
| 3925 | gMC->Gspos("I565",17,"IT56",-7.0643,-37.7904,0.0,idrotm[530],"ONLY"); |
| 3926 | gMC->Gspos("I565",16,"IT56",-13.9434,-35.992,0.0,idrotm[531],"ONLY"); |
| 3927 | gMC->Gspos("I565",15,"IT56",-20.2387,-32.6866,0.0,idrotm[501],"ONLY"); |
| 3928 | gMC->Gspos("I565",14,"IT56",-26.0036,-28.5246,0.0,idrotm[503],"ONLY"); |
| 3929 | gMC->Gspos("I553",1,"I570",0.005,0.0,52.8453,0,"ONLY"); |
| 3930 | gMC->Gspos("I523",1,"I570",0.0,0.0,46.9203+0.82,0,"ONLY"); |
| 3931 | gMC->Gspos("I523",2,"I570",0.0,0.0,43.0103+0.82,0,"ONLY"); |
| 3932 | gMC->Gspos("I523",3,"I570",0.0,0.0,39.1003+0.82,0,"ONLY"); |
| 3933 | gMC->Gspos("I523",4,"I570",0.0,0.0,35.1903+0.82,0,"ONLY"); |
| 3934 | gMC->Gspos("I523",5,"I570",0.0,0.0,31.2803+0.82,0,"ONLY"); |
| 3935 | gMC->Gspos("I523",6,"I570",0.0,0.0,27.3703+0.82,0,"ONLY"); |
| 3936 | gMC->Gspos("I523",7,"I570",0.0,0.0,23.4603+0.82,0,"ONLY"); |
| 3937 | gMC->Gspos("I523",8,"I570",0.0,0.0,19.5503+0.82,0,"ONLY"); |
| 3938 | gMC->Gspos("I523",9,"I570",0.0,0.0,15.6403+0.82,0,"ONLY"); |
| 3939 | gMC->Gspos("I523",10,"I570",0.0,0.0,11.7303+0.82,0,"ONLY"); |
| 3940 | gMC->Gspos("I523",11,"I570",0.0,0.0,7.8203+0.82,0,"ONLY"); |
| 3941 | gMC->Gspos("I523",12,"I570",0.0,0.0,3.9103+0.82,0,"ONLY"); |
| 3942 | gMC->Gspos("I523",13,"I570",0.0,0.0,0.0003+0.82,0,"ONLY"); |
| 3943 | gMC->Gspos("I523",14,"I570",0.0,0.0,-3.9097+0.82,0,"ONLY"); |
| 3944 | gMC->Gspos("I523",15,"I570",0.0,0.0,-7.8197+0.82,0,"ONLY"); |
| 3945 | gMC->Gspos("I523",16,"I570",0.0,0.0,-11.7297+0.82,0,"ONLY"); |
| 3946 | gMC->Gspos("I523",17,"I570",0.0,0.0,-15.6397+0.82,0,"ONLY"); |
| 3947 | gMC->Gspos("I523",18,"I570",0.0,0.0,-19.5497+0.82,0,"ONLY"); |
| 3948 | gMC->Gspos("I523",19,"I570",0.0,0.0,-23.4597+0.82,0,"ONLY"); |
| 3949 | gMC->Gspos("I523",20,"I570",0.0,0.0,-27.3697+0.82,0,"ONLY"); |
| 3950 | gMC->Gspos("I523",21,"I570",0.0,0.0,-31.2797+0.82,0,"ONLY"); |
| 3951 | gMC->Gspos("I523",22,"I570",0.0,0.0,-35.1897+0.82,0,"ONLY"); |
| 3952 | gMC->Gspos("I523",23,"I570",0.0,0.0,-39.0997+0.82,0,"ONLY"); |
| 3953 | gMC->Gspos("I523",24,"I570",0.0,0.0,-43.0097+0.82,0,"ONLY"); |
| 3954 | gMC->Gspos("I523",25,"I570",0.0,0.0,-46.9197+0.82,0,"ONLY"); |
| 3955 | gMC->Gspos("I553",2,"I570",-0.005,0.0,-51.2047,idrotm[570],"ONLY"); |
| 3956 | gMC->Gspos("I566",1,"I569",0.0,-0.03,46.9203,idrotm[532],"ONLY"); |
| 3957 | gMC->Gspos("I566",2,"I569",0.0,0.03,43.0103,0,"ONLY"); |
| 3958 | gMC->Gspos("I566",3,"I569",0.0,-0.03,39.1003,idrotm[532],"ONLY"); |
| 3959 | gMC->Gspos("I566",4,"I569",0.0,0.03,35.1903,0,"ONLY"); |
| 3960 | gMC->Gspos("I566",5,"I569",0.0,-0.03,31.2803,idrotm[532],"ONLY"); |
| 3961 | gMC->Gspos("I566",6,"I569",0.0,0.03,27.3703,0,"ONLY"); |
| 3962 | gMC->Gspos("I566",7,"I569",0.0,-0.03,23.4603,idrotm[532],"ONLY"); |
| 3963 | gMC->Gspos("I566",8,"I569",0.0,0.03,19.5503,0,"ONLY"); |
| 3964 | gMC->Gspos("I566",9,"I569",0.0,-0.03,15.6403,idrotm[532],"ONLY"); |
| 3965 | gMC->Gspos("I566",10,"I569",0.0,0.03,11.7303,0,"ONLY"); |
| 3966 | gMC->Gspos("I566",11,"I569",0.0,-0.03,7.8203,idrotm[532],"ONLY"); |
| 3967 | gMC->Gspos("I566",12,"I569",0.0,0.03,3.9103,0,"ONLY"); |
| 3968 | gMC->Gspos("I566",13,"I569",0.0,-0.03,0.0003,0,"ONLY"); |
| 3969 | gMC->Gspos("I566",14,"I569",0.0,0.03,-3.9097,0,"ONLY"); |
| 3970 | gMC->Gspos("I566",15,"I569",0.0,-0.03,-7.8197,idrotm[532],"ONLY"); |
| 3971 | gMC->Gspos("I566",16,"I569",0.0,0.03,-11.7297,0,"ONLY"); |
| 3972 | gMC->Gspos("I566",17,"I569",0.0,-0.03,-15.6397,0,"ONLY"); |
| 3973 | gMC->Gspos("I566",18,"I569",0.0,0.03,-19.5497,0,"ONLY"); |
| 3974 | gMC->Gspos("I566",19,"I569",0.0,-0.03,-23.4597,idrotm[532],"ONLY"); |
| 3975 | gMC->Gspos("I566",20,"I569",0.0,0.03,-27.3697,0,"ONLY"); |
| 3976 | gMC->Gspos("I566",21,"I569",0.0,-0.03,-31.2797,idrotm[532],"ONLY"); |
| 3977 | gMC->Gspos("I566",22,"I569",0.0,0.03,-35.1897,0,"ONLY"); |
| 3978 | gMC->Gspos("I566",23,"I569",0.0,-0.03,-39.0997,0,"ONLY"); |
| 3979 | gMC->Gspos("I566",24,"I569",0.0,0.03,-43.0097,0,"ONLY"); |
| 3980 | gMC->Gspos("I566",25,"I569",0.0,-0.03,-46.9197,idrotm[532],"ONLY"); |
| 3981 | gMC->Gspos("I544",1,"I571",0.0101,0.0,43.125,0,"ONLY"); |
| 3982 | gMC->Gspos("I516",20,"I571",0.0001,0.0,39.1-1.08,0,"ONLY"); |
| 3983 | gMC->Gspos("I516",19,"I571",0.0001,0.0,35.19-1.08,0,"ONLY"); |
| 3984 | gMC->Gspos("I516",18,"I571",0.0001,0.0,31.28-1.08,0,"ONLY"); |
| 3985 | gMC->Gspos("I516",17,"I571",0.0001,0.0,27.37-1.08,0,"ONLY"); |
| 3986 | gMC->Gspos("I516",16,"I571",0.0001,0.0,23.46-1.08,0,"ONLY"); |
| 3987 | gMC->Gspos("I516",15,"I571",0.0001,0.0,19.55-1.08,0,"ONLY"); |
| 3988 | gMC->Gspos("I516",14,"I571",0.0001,0.0,15.64-1.08,0,"ONLY"); |
| 3989 | gMC->Gspos("I516",13,"I571",0.0001,0.0,11.73-1.08,0,"ONLY"); |
| 3990 | gMC->Gspos("I516",12,"I571",0.0001,0.0,7.82-1.08,0,"ONLY"); |
| 3991 | gMC->Gspos("I516",11,"I571",0.0001,0.0,3.91-1.08,0,"ONLY"); |
| 3992 | gMC->Gspos("I516",10,"I571",0.0001,0.0,0.0-1.08,0,"ONLY"); |
| 3993 | gMC->Gspos("I516",9,"I571",0.0001,0.0,-3.91-1.08,0,"ONLY"); |
| 3994 | gMC->Gspos("I516",8,"I571",0.0001,0.0,-7.82-1.08,0,"ONLY"); |
| 3995 | gMC->Gspos("I516",7,"I571",0.0001,0.0,-11.73-1.08,0,"ONLY"); |
| 3996 | gMC->Gspos("I516",6,"I571",0.0001,0.0,-15.64-1.08,0,"ONLY"); |
| 3997 | gMC->Gspos("I516",5,"I571",0.0001,0.0,-19.55-1.08,0,"ONLY"); |
| 3998 | gMC->Gspos("I516",4,"I571",0.0001,0.0,-23.46-1.08,0,"ONLY"); |
| 3999 | gMC->Gspos("I516",3,"I571",0.0001,0.0,-27.37-1.08,0,"ONLY"); |
| 4000 | gMC->Gspos("I516",2,"I571",0.0001,0.0,-31.28-1.08,0,"ONLY"); |
| 4001 | gMC->Gspos("I516",1,"I571",0.0001,0.0,-35.19-1.08,0,"ONLY"); |
| 4002 | gMC->Gspos("I544",2,"I571",-0.0099,0.0,-41.375,idrotm[570],"ONLY"); |
| 4003 | gMC->Gspos("I562",1,"I565",0.0,0.03,41.1546,0,"ONLY"); |
| 4004 | gMC->Gspos("I562",2,"I565",0.0,-0.03,37.2246,0,"ONLY"); |
| 4005 | gMC->Gspos("I562",3,"I565",0.0,0.03,33.3146,0,"ONLY"); |
| 4006 | gMC->Gspos("I562",4,"I565",0.0,-0.03,29.3846,0,"ONLY"); |
| 4007 | gMC->Gspos("I562",5,"I565",0.0,0.03,25.4746,0,"ONLY"); |
| 4008 | gMC->Gspos("I562",6,"I565",0.0,-0.03,21.5446,0,"ONLY"); |
| 4009 | gMC->Gspos("I562",7,"I565",0.0,0.03,17.6346,0,"ONLY"); |
| 4010 | gMC->Gspos("I562",8,"I565",0.0,-0.03,13.7046,0,"ONLY"); |
| 4011 | gMC->Gspos("I562",9,"I565",0.0,0.03,9.7946,0,"ONLY"); |
| 4012 | gMC->Gspos("I562",10,"I565",0.0,-0.03,5.8645,0,"ONLY"); |
| 4013 | gMC->Gspos("I562",11,"I565",0.0,0.03,1.9546,0,"ONLY"); |
| 4014 | gMC->Gspos("I562",12,"I565",0.0,-0.03,-1.9754,0,"ONLY"); |
| 4015 | gMC->Gspos("I562",13,"I565",0.0,0.03,-5.8855,0,"ONLY"); |
| 4016 | gMC->Gspos("I562",14,"I565",0.0,-0.03,-9.8154,0,"ONLY"); |
| 4017 | gMC->Gspos("I562",15,"I565",0.0,0.03,-13.7254,0,"ONLY"); |
| 4018 | gMC->Gspos("I562",16,"I565",0.0,-0.03,-17.6555,0,"ONLY"); |
| 4019 | gMC->Gspos("I562",17,"I565",0.0,0.03,-21.5655,0,"ONLY"); |
| 4020 | gMC->Gspos("I562",18,"I565",0.0,-0.03,-25.4954,0,"ONLY"); |
| 4021 | gMC->Gspos("I562",19,"I565",0.0,0.03,-29.4054,0,"ONLY"); |
| 4022 | gMC->Gspos("I562",20,"I565",0.0,-0.03,-33.3354,0,"ONLY"); |
| 4023 | gMC->Gspos("I562",21,"I565",0.0,0.03,-37.2454,0,"ONLY"); |
| 4024 | gMC->Gspos("I562",22,"I565",0.0,-0.03,-41.1554,0,"ONLY"); |
| 4025 | gMC->Gspos("I559",1,"I553",2.25,-1.615,0.0,0,"ONLY"); |
| 4026 | gMC->Gspos("I560",1,"I553",2.25,-1.615,0.0,0,"ONLY"); |
| 4027 | gMC->Gspos("I560",2,"I553",-2.25,-1.615,0.0,idrotm[573],"ONLY"); |
| 4028 | gMC->Gspos("I558",1,"I553",-1.7167,-1.52,0.0,idrotm[583],"ONLY"); |
| 4029 | gMC->Gspos("I557",1,"I553",-1.8533,-1.341,0.0,idrotm[581],"ONLY"); |
| 4030 | gMC->Gspos("I558",2,"I553",1.8367,-1.3122,0.0,idrotm[575],"ONLY"); |
| 4031 | gMC->Gspos("I557",2,"I553",1.75,-1.52,0.0,idrotm[583],"ONLY"); |
| 4032 | gMC->Gspos("I558",3,"I553",-0.12,1.6613,0.0,idrotm[581],"ONLY"); |
| 4033 | gMC->Gspos("I557",3,"I553",0.1034,1.6901,0.0,idrotm[575],"ONLY"); |
| 4034 | gMC->Gspos("I556",3,"I553",-1.031,0.2033,-2.203,idrotm[580],"ONLY"); |
| 4035 | gMC->Gspos("I556",1,"I553",1.0311,0.2033,-0.287,idrotm[576],"ONLY"); |
| 4036 | gMC->Gspos("I554",1,"I553",0.0,-1.58,0.71,0,"ONLY"); |
| 4037 | gMC->Gspos("I555",1,"I553",-0.0072,-1.58,-1.2311,idrotm[633],"ONLY"); |
| 4038 | gMC->Gspos("I556",2,"I553",1.0311,0.2033,-2.203,idrotm[577],"ONLY"); |
| 4039 | gMC->Gspos("I556",4,"I553",-1.031,0.2033,-0.287,idrotm[579],"ONLY"); |
| 4040 | gMC->Gspos("I559",2,"I553",-2.25,-1.615,0.0,idrotm[573],"ONLY"); |
| 8f8273a4 |
4041 | |
| 4042 | gMC->Gspos("I561",1,"I553",2.1,-1.615,-0.24,0,"ONLY"); |
| 4043 | gMC->Gspos("I561",2,"I553",-2.1,-1.615,-0.24,idrotm[573],"ONLY"); |
| 4044 | |
| 108bd0fe |
4045 | gMC->Gspos("I519",37,"I523",0.0001,-1.79,-0.99,idrotm[586],"ONLY"); |
| 4046 | gMC->Gspos("I519",36,"I523",-3.2986,-1.79,-1.2943,0,"ONLY"); |
| 4047 | gMC->Gspos("I519",35,"I523",-3.2986,-1.71,-1.2943,0,"ONLY"); |
| 4048 | gMC->Gspos("I519",34,"I523",-3.2286,-1.71,-1.2943,0,"ONLY"); |
| 4049 | gMC->Gspos("I519",33,"I523",-3.2286,-1.79,-1.2943,0,"ONLY"); |
| 4050 | gMC->Gspos("I519",32,"I523",-3.1586,-1.79,-1.2943,0,"ONLY"); |
| 4051 | gMC->Gspos("I519",31,"I523",-3.1586,-1.71,-1.2943,0,"ONLY"); |
| 4052 | gMC->Gspos("I519",30,"I523",-1.3436,-1.71,-1.2943,0,"ONLY"); |
| 4053 | gMC->Gspos("I519",29,"I523",-1.3436,-1.79,-1.2943,0,"ONLY"); |
| 4054 | gMC->Gspos("I519",28,"I523",-1.2736,-1.79,-1.2943,0,"ONLY"); |
| 4055 | gMC->Gspos("I519",27,"I523",-1.2736,-1.71,-1.2943,0,"ONLY"); |
| 4056 | gMC->Gspos("I519",26,"I523",-1.2036,-1.71,-1.2943,0,"ONLY"); |
| 4057 | gMC->Gspos("I519",25,"I523",-1.2036,-1.79,-1.2943,0,"ONLY"); |
| 4058 | gMC->Gspos("I519",24,"I523",-1.0458,-1.79,-1.2943,0,"ONLY"); |
| 4059 | gMC->Gspos("I519",23,"I523",-1.0458,-1.71,-1.2943,0,"ONLY"); |
| 4060 | gMC->Gspos("I519",22,"I523",-0.9758,-1.71,-1.2943,0,"ONLY"); |
| 4061 | gMC->Gspos("I519",21,"I523",-0.9758,-1.79,-1.2943,0,"ONLY"); |
| 4062 | gMC->Gspos("I519",20,"I523",-0.9058,-1.79,-1.2943,0,"ONLY"); |
| 4063 | gMC->Gspos("I519",19,"I523",-0.9058,-1.71,-1.2943,0,"ONLY"); |
| 4064 | gMC->Gspos("I519",18,"I523",0.9092,-1.71,-1.2943,0,"ONLY"); |
| 4065 | gMC->Gspos("I519",17,"I523",0.9092,-1.79,-1.2943,0,"ONLY"); |
| 4066 | gMC->Gspos("I519",16,"I523",0.9792,-1.79,-1.2943,0,"ONLY"); |
| 4067 | gMC->Gspos("I519",15,"I523",0.9792,-1.71,-1.2943,0,"ONLY"); |
| 4068 | gMC->Gspos("I519",14,"I523",1.0492,-1.71,-1.2943,0,"ONLY"); |
| 4069 | gMC->Gspos("I519",13,"I523",1.0492,-1.79,-1.2943,0,"ONLY"); |
| 4070 | gMC->Gspos("I519",12,"I523",1.207,-1.79,-1.2943,0,"ONLY"); |
| 4071 | gMC->Gspos("I519",11,"I523",1.207,-1.71,-1.2943,0,"ONLY"); |
| 4072 | gMC->Gspos("I519",10,"I523",1.277,-1.71,-1.2943,0,"ONLY"); |
| 4073 | gMC->Gspos("I519",9,"I523",1.277,-1.79,-1.2943,0,"ONLY"); |
| 4074 | gMC->Gspos("I519",8,"I523",1.347,-1.79,-1.2943,0,"ONLY"); |
| 4075 | gMC->Gspos("I519",7,"I523",1.347,-1.71,-1.2943,0,"ONLY"); |
| 4076 | gMC->Gspos("I519",6,"I523",3.162,-1.71,-1.2943,0,"ONLY"); |
| 4077 | gMC->Gspos("I519",5,"I523",3.162,-1.79,-1.2943,0,"ONLY"); |
| 4078 | gMC->Gspos("I519",4,"I523",3.232,-1.79,-1.2943,0,"ONLY"); |
| 4079 | gMC->Gspos("I519",3,"I523",3.232,-1.71,-1.2943,0,"ONLY"); |
| 4080 | gMC->Gspos("I521",12,"I523",-2.8209,-1.7925,-0.982,0,"ONLY"); |
| 4081 | gMC->Gspos("I521",11,"I523",-1.6895,-1.7925,-0.982,0,"ONLY"); |
| 4082 | gMC->Gspos("I521",10,"I523",-0.5631,-1.7925,-0.982,0,"ONLY"); |
| 4083 | gMC->Gspos("I521",9,"I523",0.5633,-1.7925,-0.982,0,"ONLY"); |
| 4084 | gMC->Gspos("I521",8,"I523",1.6861,-1.7925,-0.982,0,"ONLY"); |
| 4085 | gMC->Gspos("I521",7,"I523",2.8161,-1.7925,-0.982,0,"ONLY"); |
| 4086 | gMC->Gspos("I519",2,"I523",3.302,-1.79,-1.2943,0,"ONLY"); |
| 4087 | gMC->Gspos("I520",3,"I523",0.0001,-1.845,-1.19,0,"ONLY"); |
| 4088 | gMC->Gspos("I520",2,"I523",-2.2499,-1.845,-1.19,0,"ONLY"); |
| 4089 | gMC->Gspos("I521",6,"I523",-2.8209,-1.7075,-0.982,0,"ONLY"); |
| 4090 | gMC->Gspos("I521",5,"I523",-1.6895,-1.7075,-0.982,0,"ONLY"); |
| 4091 | gMC->Gspos("I521",4,"I523",-0.5631,-1.7075,-0.982,0,"ONLY"); |
| 4092 | gMC->Gspos("I521",3,"I523",0.5633,-1.7075,-0.982,0,"ONLY"); |
| 4093 | gMC->Gspos("I521",2,"I523",1.6861,-1.7075,-0.982,0,"ONLY"); |
| 4094 | gMC->Gspos("I518",1,"I523",0.0001,-1.75,-1.065,0,"ONLY"); |
| 4095 | gMC->Gspos("I519",1,"I523",3.302,-1.71,-1.2943,0,"ONLY"); |
| 4096 | gMC->Gspos("I520",1,"I523",2.2501,-1.845,-1.19,0,"ONLY"); |
| 4097 | gMC->Gspos("I521",1,"I523",2.8161,-1.7075,-0.982,0,"ONLY"); |
| 8f8273a4 |
4098 | |
| 4099 | gMC->Gspos("I522",1,"I523",2.2501,-1.655,-1.3,idrotm[583],"ONLY"); |
| 4100 | gMC->Gspos("I522",2,"I523",-2.2499,-1.655,-1.3,idrotm[583],"ONLY"); |
| 4101 | |
| 108bd0fe |
4102 | gMC->Gspos("I542",2,"I523",-2.2499,-1.615,0.0,idrotm[573],"ONLY"); |
| 4103 | gMC->Gspos("I541",2,"I523",-2.2499,-1.615,0.0,idrotm[573],"ONLY"); |
| 4104 | gMC->Gspos("I541",1,"I523",2.2501,-1.615,0.0,0,"ONLY"); |
| 4105 | gMC->Gspos("I542",1,"I523",2.2501,-1.615,0.0,0,"ONLY"); |
| 8f8273a4 |
4106 | gMC->Gspos("I543",1,"I523",2.1001,-1.615,0.955,0,"ONLY"); |
| 108bd0fe |
4107 | gMC->Gspos("I543",2,"I523",-2.0999,-1.615,0.955,idrotm[573],"MANY"); |
| 4108 | gMC->Gspos("I537",2,"I523",1.7501,-1.52,0.0,idrotm[583],"ONLY"); |
| 4109 | gMC->Gspos("I538",2,"I523",1.8368,-1.3122,0.0,idrotm[575],"ONLY"); |
| 4110 | gMC->Gspos("I537",3,"I523",0.1035,1.6901,0.0,idrotm[575],"ONLY"); |
| 4111 | gMC->Gspos("I538",3,"I523",-0.1199,1.6612,0.0,idrotm[581],"ONLY"); |
| 4112 | gMC->Gspos("I538",1,"I523",-1.7166,-1.52,0.0,idrotm[583],"ONLY"); |
| 4113 | gMC->Gspos("I537",1,"I523",-1.8532,-1.341,0.0,idrotm[581],"ONLY"); |
| 4114 | gMC->Gspos("I536",3,"I523",-1.031,0.2033,-1.008,idrotm[580],"ONLY"); |
| 4115 | gMC->Gspos("I536",4,"I523",-1.031,0.2033,0.908,idrotm[579],"ONLY"); |
| 4116 | gMC->Gspos("I535",1,"I523",-0.0072,-1.58,-0.0361,idrotm[633],"ONLY"); |
| 4117 | gMC->Gspos("I536",2,"I523",1.0312,0.2033,-1.008,idrotm[577],"ONLY"); |
| 4118 | gMC->Gspos("I536",1,"I523",1.0312,0.2033,0.908,idrotm[576],"ONLY"); |
| 4119 | gMC->Gspos("I534",1,"I523",0.0001,-1.58,1.905,0,"ONLY"); |
| 4120 | gMC->Gspos("I540",1,"I523",0.0001,-1.785,1.905,idrotm[571],"ONLY"); |
| 4121 | gMC->Gspos("I539",1,"I523",1.8001,-1.75,-0.195,idrotm[571],"ONLY"); |
| 4122 | gMC->Gspos("I539",2,"I523",-1.7999,-1.75,-0.195,idrotm[572],"ONLY"); |
| 4123 | gMC->Gspos("ITS6",1,"I566",0.0,0.0,0.0,0,"ONLY"); |
| 4124 | gMC->Gspos("I550",1,"I544",2.25,-1.615,0.0,0,"ONLY"); |
| 4125 | gMC->Gspos("I551",1,"I544",2.25,-1.615,0.0,0,"ONLY"); |
| 4126 | gMC->Gspos("I551",2,"I544",-2.25,-1.615,0.0,idrotm[573],"ONLY"); |
| 4127 | gMC->Gspos("I550",2,"I544",-2.25,-1.615,0.0,idrotm[573],"ONLY"); |
| 4128 | gMC->Gspos("I549",1,"I544",1.7167,-1.52,0.0,idrotm[583],"ONLY"); |
| 4129 | gMC->Gspos("I548",1,"I544",1.8533,-1.341,0.0,idrotm[575],"ONLY"); |
| 4130 | gMC->Gspos("I547",1,"I544",1.0311,0.2033,-0.287,idrotm[576],"ONLY"); |
| 4131 | gMC->Gspos("I545",1,"I544",0.0,-1.58,0.71,0,"ONLY"); |
| 4132 | gMC->Gspos("I547",2,"I544",1.0311,0.2033,-2.203,idrotm[577],"ONLY"); |
| 4133 | gMC->Gspos("I546",1,"I544",-0.0073,-1.58,-1.2311,idrotm[633],"ONLY"); |
| 4134 | gMC->Gspos("I547",4,"I544",-1.0311,0.2033,-0.287,idrotm[579],"ONLY"); |
| 4135 | gMC->Gspos("I547",3,"I544",-1.0311,0.2033,-2.203,idrotm[580],"ONLY"); |
| 4136 | gMC->Gspos("I548",2,"I544",-0.1033,1.6901,0.0,idrotm[581],"O]NLY"); |
| 4137 | gMC->Gspos("I549",2,"I544",0.12,1.6613,0.0,idrotm[575],"ONLY"); |
| 4138 | gMC->Gspos("I549",3,"I544",-1.8367,-1.3122,0.0,idrotm[581],"ONLY"); |
| 4139 | gMC->Gspos("I548",3,"I544",-1.75,-1.52,0.0,idrotm[583],"ONLY"); |
| 8f8273a4 |
4140 | |
| 4141 | gMC->Gspos("I552",1,"I544",2.1,-1.615,-0.24,0,"ONLY"); |
| 4142 | gMC->Gspos("I552",2,"I544",-2.1,-1.615,-0.24,idrotm[573],"ONLY"); |
| 4143 | |
| 108bd0fe |
4144 | gMC->Gspos("I515",12,"I516",-1.6896,-1.7075,-0.9822,0,"ONLY"); |
| 4145 | gMC->Gspos("I515",11,"I516",-1.6896,-1.7925,-0.9822,0,"ONLY"); |
| 4146 | gMC->Gspos("I513",37,"I516",0.0,-1.79,-1.035,idrotm[586],"ONLY"); |
| 4147 | gMC->Gspos("I513",1,"I516",-3.2987,-1.71,-1.2943,0,"ONLY"); |
| 4148 | gMC->Gspos("I515",1,"I516",-2.816,-1.7075,-0.9822,0,"ONLY"); |
| 4149 | gMC->Gspos("I514",1,"I516",-2.25,-1.845,-1.19,0,"ONLY"); |
| 4150 | gMC->Gspos("I514",2,"I516",0.0,-1.845,-1.19,0,"ONLY"); |
| 4151 | gMC->Gspos("I514",3,"I516",2.25,-1.845,-1.19,0,"ONLY"); |
| 4152 | gMC->Gspos("I515",2,"I516",-2.816,-1.7925,-0.9822,0,"ONLY"); |
| 4153 | gMC->Gspos("I513",2,"I516",-3.2987,-1.79,-1.2943,0,"ONLY"); |
| 4154 | gMC->Gspos("I515",3,"I516",-0.5632,-1.7075,-0.9822,0,"ONLY"); |
| 4155 | gMC->Gspos("I515",4,"I516",-0.5632,-1.7925,-0.9822,0,"ONLY"); |
| 4156 | gMC->Gspos("I515",5,"I516",0.5632,-1.7925,-0.9822,0,"ONLY"); |
| 4157 | gMC->Gspos("I515",6,"I516",0.5632,-1.7075,-0.9822,0,"ONLY"); |
| 4158 | gMC->Gspos("I515",7,"I516",1.6896,-1.7075,-0.9822,0,"ONLY"); |
| 4159 | gMC->Gspos("I515",8,"I516",1.6896,-1.7925,-0.9822,0,"ONLY"); |
| 4160 | gMC->Gspos("I515",9,"I516",2.816,-1.7925,-0.9822,0,"ONLY"); |
| 4161 | gMC->Gspos("I515",10,"I516",2.816,-1.7075,-0.9822,0,"ONLY"); |
| 4162 | gMC->Gspos("I513",3,"I516",-3.2287,-1.79,-1.2943,0,"ONLY"); |
| 4163 | gMC->Gspos("I513",4,"I516",-3.2287,-1.71,-1.2943,0,"ONLY"); |
| 4164 | gMC->Gspos("I513",5,"I516",-3.1587,-1.71,-1.2943,0,"ONLY"); |
| 4165 | gMC->Gspos("I513",6,"I516",-3.1587,-1.79,-1.2943,0,"ONLY"); |
| 4166 | gMC->Gspos("I513",7,"I516",-1.3437,-1.79,-1.2943,0,"ONLY"); |
| 4167 | gMC->Gspos("I513",8,"I516",-1.3437,-1.71,-1.2943,0,"ONLY"); |
| 4168 | gMC->Gspos("I513",9,"I516",-1.2737,-1.71,-1.2943,0,"ONLY"); |
| 4169 | gMC->Gspos("I513",10,"I516",-1.2737,-1.79,-1.2943,0,"ONLY"); |
| 4170 | gMC->Gspos("I513",11,"I516",-1.2037,-1.79,-1.2943,0,"ONLY"); |
| 4171 | gMC->Gspos("I513",12,"I516",-1.2037,-1.71,-1.2943,0,"ONLY"); |
| 4172 | gMC->Gspos("I513",13,"I516",-1.046,-1.71,-1.2943,0,"ONLY"); |
| 4173 | gMC->Gspos("I513",14,"I516",-1.046,-1.79,-1.2943,0,"ONLY"); |
| 4174 | gMC->Gspos("I513",15,"I516",-0.976,-1.79,-1.2943,0,"ONLY"); |
| 4175 | gMC->Gspos("I513",16,"I516",-0.976,-1.71,-1.2943,0,"ONLY"); |
| 4176 | gMC->Gspos("I513",17,"I516",-0.906,-1.71,-1.2943,0,"ONLY"); |
| 4177 | gMC->Gspos("I513",18,"I516",-0.906,-1.79,-1.2943,0,"ONLY"); |
| 4178 | gMC->Gspos("I513",19,"I516",0.9091,-1.79,-1.2943,0,"ONLY"); |
| 4179 | gMC->Gspos("I513",20,"I516",0.9091,-1.71,-1.2943,0,"ONLY"); |
| 4180 | gMC->Gspos("I513",21,"I516",0.9791,-1.71,-1.2943,0,"ONLY"); |
| 4181 | gMC->Gspos("I513",22,"I516",0.9791,-1.79,-1.2943,0,"ONLY"); |
| 4182 | gMC->Gspos("I513",23,"I516",1.0491,-1.79,-1.2943,0,"ONLY"); |
| 4183 | gMC->Gspos("I513",24,"I516",1.0491,-1.71,-1.2943,0,"ONLY"); |
| 4184 | gMC->Gspos("I513",25,"I516",1.2068,-1.71,-1.2943,0,"ONLY"); |
| 4185 | gMC->Gspos("I513",26,"I516",1.2068,-1.79,-1.2943,0,"ONLY"); |
| 4186 | gMC->Gspos("I513",27,"I516",1.2768,-1.79,-1.2943,0,"ONLY"); |
| 4187 | gMC->Gspos("I513",28,"I516",1.2768,-1.71,-1.2943,0,"ONLY"); |
| 4188 | gMC->Gspos("I513",29,"I516",1.3469,-1.71,-1.2943,0,"ONLY"); |
| 4189 | gMC->Gspos("I513",30,"I516",1.3469,-1.79,-1.2943,0,"ONLY"); |
| 4190 | gMC->Gspos("I513",31,"I516",3.1619,-1.79,-1.2943,0,"ONLY"); |
| 4191 | gMC->Gspos("I513",32,"I516",3.1619,-1.71,-1.2943,0,"ONLY"); |
| 4192 | gMC->Gspos("I513",33,"I516",3.2319,-1.71,-1.2943,0,"ONLY"); |
| 4193 | gMC->Gspos("I513",34,"I516",3.2319,-1.79,-1.2943,0,"ONLY"); |
| 4194 | gMC->Gspos("I513",35,"I516",3.3019,-1.79,-1.2943,0,"ONLY"); |
| 4195 | gMC->Gspos("I513",36,"I516",3.3019,-1.71,-1.2943,0,"ONLY"); |
| 4196 | gMC->Gspos("I512",1,"I516",0.0,-1.75,-1.065,0,"ONLY"); |
| 4197 | gMC->Gspos("I528",1,"I516",1.7167,-1.52,0.0,idrotm[583],"ONLY"); |
| 4198 | gMC->Gspos("I527",1,"I516",1.8534,-1.341,0.0,idrotm[575],"ONLY"); |
| 4199 | gMC->Gspos("I528",2,"I516",0.12,1.6613,0.0,idrotm[575],"ONLY"); |
| 4200 | gMC->Gspos("I527",2,"I516",-0.1033,1.6901,0.0,idrotm[581],"ONLY"); |
| 4201 | gMC->Gspos("I527",3,"I516",-1.75,-1.52,0.0,idrotm[583],"ONLY"); |
| 4202 | gMC->Gspos("I528",3,"I516",-1.8367,-1.3122,0.0,idrotm[581],"ONLY"); |
| 4203 | gMC->Gspos("I526",2,"I516",1.0311,0.2033,-1.008,idrotm[577],"ONLY"); |
| 4204 | gMC->Gspos("I525",1,"I516",-0.0073,-1.58,-0.0361,idrotm[633],"ONLY"); |
| 4205 | gMC->Gspos("I524",1,"I516",0.0,-1.58,1.905,0,"ONLY"); |
| 4206 | gMC->Gspos("I526",1,"I516",1.0311,0.2033,0.908,idrotm[576],"ONLY"); |
| 4207 | gMC->Gspos("I526",3,"I516",-1.0311,0.2033,0.908,idrotm[579],"ONLY"); |
| 4208 | gMC->Gspos("I526",4,"I516",-1.0311,0.2033,-1.008,idrotm[580],"ONLY"); |
| 4209 | gMC->Gspos("I529",1,"I516",1.8,-1.75,-0.195,idrotm[571],"ONLY"); |
| 4210 | gMC->Gspos("I530",1,"I516",0.0,-1.785,1.905,idrotm[571],"ONLY"); |
| 4211 | gMC->Gspos("I529",2,"I516",-1.8,-1.75,-0.195,idrotm[572],"ONLY"); |
| 8f8273a4 |
4212 | |
| 4213 | gMC->Gspos("I517",1,"I516",2.25,-1.655,-1.3,idrotm[583],"ONLY"); |
| 4214 | gMC->Gspos("I517",2,"I516",-2.25,-1.655,-1.3,idrotm[584],"ONLY"); |
| 4215 | |
| 108bd0fe |
4216 | gMC->Gspos("I531",2,"I516",-2.25,-1.615,0.0,idrotm[573],"ONLY"); |
| 4217 | gMC->Gspos("I531",1,"I516",2.25,-1.615,0.0,0,"ONLY"); |
| 4218 | gMC->Gspos("I532",1,"I516",2.25,-1.615,0.0,0,"ONLY"); |
| 4219 | gMC->Gspos("I532",2,"I516",-2.25,-1.615,0.0,idrotm[573],"ONLY"); |
| 8f8273a4 |
4220 | gMC->Gspos("I533",1,"I516",2.1,-1.615,0.955,0,"ONLY"); |
| 108bd0fe |
4221 | gMC->Gspos("I533",2,"I516",-2.1,-1.615,0.955,idrotm[573],"MANY"); |
| 4222 | gMC->Gspos("ITS5",1,"I562",0.0,0.0,0.0,0,"ONLY"); |
| 4223 | } |
| 4224 | |
| 4225 | // --- Place volumes of shield between SPD and SDD |
| 4226 | |
| 4227 | if (! AliITSInitGeometry::SPDshieldIsTGeoNative()) { |
| 4228 | gMC->Gspos("IC01",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); |
| 4229 | gMC->Gspos("IC02",1,"ITSD",0.0,0.0,25.+8.75,0,"ONLY"); |
| 4230 | gMC->Gspos("IC02",2,"ITSD",0.0,0.0,-25.-8.75,idrotm[200],"ONLY"); |
| 4231 | //gMC->Gspos("IC03",1,"ITSD",0.0,0.0,25.+17.5+7.875,0,"ONLY"); |
| 4232 | //gMC->Gspos("IC03",2,"ITSD",0.0,0.0,-25.-17.5-7.875,idrotm[200],"ONLY"); |
| 4233 | } |
| 4234 | |
| 4235 | // --- Place volumes of cylinders between SPD and SDD and SDD and SSD |
| 4236 | if (! AliITSInitGeometry::SDDconeIsTGeoNative()) { |
| 4237 | gMC->Gspos("ICY1",1,"IS02",0.0,0.0,0.,0,"ONLY"); |
| 4238 | gMC->Gspos("ICY2",1,"IS01",0.0,0.0,0.,0,"ONLY"); |
| 074b8e6f |
4239 | gMC->Gspos("ICY3",1,"IS01",0.0,0.0,0.,0,"ONLY"); |
| 4240 | gMC->Gspos("ICY4",1,"IS01",0.0,0.0,0.,0,"ONLY"); |
| 108bd0fe |
4241 | |
| 4242 | // --- Place volumes of SDD cone ---------------------------------- |
| 4243 | |
| 8f8273a4 |
4244 | gMC->Gspos("I093",1,"IS02",0.0,0.0,0.0,0,"ONLY"); |
| 4245 | gMC->Gspos("I093",2,"IS02",0.0,0.0,0.0,idrotm[856],"ONLY"); |
| 4246 | gMC->Gspos("I099",4,"IS02",0.0,0.0,0.0,idrotm[857],"ONLY"); |
| 4247 | gMC->Gspos("I099",3,"IS02",0.0,0.0,0.0,idrotm[858],"ONLY"); |
| 4248 | gMC->Gspos("I099",5,"IS02",0.0,0.0,0.0,idrotm[859],"ONLY"); |
| 4249 | gMC->Gspos("I099",6,"IS02",0.0,0.0,0.0,idrotm[860],"ONLY"); |
| 4250 | gMC->Gspos("I099",7,"IS02",0.0,0.0,0.0,idrotm[861],"ONLY"); |
| 4251 | gMC->Gspos("I099",2,"IS02",0.0,0.0,0.0,idrotm[862],"ONLY"); |
| 4252 | gMC->Gspos("I200",4,"IS02",0.0,0.0,0.0,idrotm[863],"ONLY"); |
| 4253 | gMC->Gspos("I200",3,"IS02",0.0,0.0,0.0,idrotm[864],"ONLY"); |
| 4254 | gMC->Gspos("I200",2,"IS02",0.0,0.0,0.0,idrotm[865],"ONLY"); |
| 4255 | gMC->Gspos("I200",13,"IS02",0.0,0.0,0.0,idrotm[867],"ONLY"); |
| 4256 | gMC->Gspos("I200",12,"IS02",0.0,0.0,0.0,idrotm[869],"ONLY"); |
| 4257 | gMC->Gspos("I200",11,"IS02",0.0,0.0,0.0,idrotm[870],"ONLY"); |
| 4258 | gMC->Gspos("I200",10,"IS02",0.0,0.0,0.0,idrotm[871],"ONLY"); |
| 4259 | gMC->Gspos("I200",9,"IS02",0.0,0.0,0.0,idrotm[872],"ONLY"); |
| 4260 | gMC->Gspos("I200",8,"IS02",0.0,0.0,0.0,idrotm[873],"ONLY"); |
| 4261 | gMC->Gspos("I200",7,"IS02",0.0,0.0,0.0,idrotm[874],"ONLY"); |
| 4262 | gMC->Gspos("I200",6,"IS02",0.0,0.0,0.0,idrotm[875],"ONLY"); |
| 4263 | gMC->Gspos("I200",5,"IS02",0.0,0.0,0.0,idrotm[876],"ONLY"); |
| 108bd0fe |
4264 | gMC->Gspos("I090",2,"IS02",0.0,0.0,-39.4,0,"ONLY"); |
| 4265 | gMC->Gspos("I090",1,"IS02",0.0,0.0,39.4,idrotm[856],"ONLY"); |
| 4266 | gMC->Gspos("I099",9,"IS02",0.0,0.0,0.0,idrotm[877],"ONLY"); |
| 4267 | gMC->Gspos("I099",8,"IS02",0.0,0.0,0.0,idrotm[879],"ONLY"); |
| 4268 | gMC->Gspos("I099",1,"IS02",0.0,0.0,0.0,idrotm[880],"ONLY"); |
| 4269 | gMC->Gspos("I099",12,"IS02",0.0,0.0,0.0,idrotm[881],"ONLY"); |
| 4270 | gMC->Gspos("I099",11,"IS02",0.0,0.0,0.0,idrotm[851],"ONLY"); |
| 4271 | gMC->Gspos("I099",10,"IS02",0.0,0.0,0.0,idrotm[882],"ONLY"); |
| 4272 | gMC->Gspos("I200",23,"IS02",0.0,0.0,0.0,idrotm[898],"ONLY"); |
| 4273 | gMC->Gspos("I200",24,"IS02",0.0,0.0,0.0,idrotm[883],"ONLY"); |
| 4274 | gMC->Gspos("I200",1,"IS02",0.0,0.0,0.0,idrotm[884],"ONLY"); |
| 4275 | gMC->Gspos("I200",14,"IS02",0.0,0.0,0.0,idrotm[885],"ONLY"); |
| 4276 | gMC->Gspos("I200",15,"IS02",0.0,0.0,0.0,idrotm[887],"ONLY"); |
| 4277 | gMC->Gspos("I200",16,"IS02",0.0,0.0,0.0,idrotm[888],"ONLY"); |
| 4278 | gMC->Gspos("I200",17,"IS02",0.0,0.0,0.0,idrotm[889],"ONLY"); |
| 4279 | gMC->Gspos("I200",18,"IS02",0.0,0.0,0.0,idrotm[890],"ONLY"); |
| 4280 | gMC->Gspos("I200",22,"IS02",0.0,0.0,0.0,idrotm[891],"ONLY"); |
| 4281 | gMC->Gspos("I200",21,"IS02",0.0,0.0,0.0,idrotm[892],"ONLY"); |
| 4282 | gMC->Gspos("I200",20,"IS02",0.0,0.0,0.0,idrotm[868],"ONLY"); |
| 4283 | gMC->Gspos("I200",19,"IS02",0.0,0.0,0.0,idrotm[893],"ONLY"); |
| 8f8273a4 |
4284 | |
| 4285 | gMC->Gspos("I098",1,"IS02",0.0,0.0,33.6,0,"ONLY"); |
| 4286 | gMC->Gspos("I097",1,"IS02",0.0,0.0,26.6,0,"ONLY"); |
| 4287 | gMC->Gspos("I097",2,"IS02",0.0,0.0,-26.6,idrotm[856],"ONLY"); |
| 4288 | gMC->Gspos("I098",2,"IS02",0.0,0.0,-33.6,idrotm[856],"ONLY"); |
| 4289 | |
| 108bd0fe |
4290 | gMC->Gspos("I202",1,"IS02",12.1,0.0,33.84,0,"ONLY"); |
| 4291 | gMC->Gspos("I202",6,"IS02",-6.05,-10.4789,33.84,idrotm[930],"ONLY"); |
| 4292 | gMC->Gspos("I202",5,"IS02",-6.05,10.4789,33.84,idrotm[929],"ONLY"); |
| 4293 | gMC->Gspos("I202",2,"IS02",12.1,0.0,-33.84,idrotm[856],"ONLY"); |
| 4294 | gMC->Gspos("I202",3,"IS02",-6.05,10.4789,-33.84,idrotm[932],"ONLY"); |
| 4295 | gMC->Gspos("I202",4,"IS02",-6.05,-10.4789,-33.84,idrotm[934],"ONLY"); |
| 4296 | gMC->Gspos("I203",12,"IS02",21.8453,0.0,-42.24,idrotm[856],"ONLY"); |
| 4297 | gMC->Gspos("I203",11,"IS02",10.9227,-18.9186,-42.24,idrotm[935],"ONLY"); |
| 4298 | gMC->Gspos("I203",10,"IS02",10.9227,-18.9186,42.24,idrotm[846],"ONLY"); |
| 4299 | gMC->Gspos("I203",9,"IS02",-10.9227,-18.9186,-42.24,idrotm[934],"ONLY"); |
| 4300 | gMC->Gspos("I203",8,"IS02",-10.9227,-18.9186,42.24,idrotm[930],"ONLY"); |
| 4301 | gMC->Gspos("I203",7,"IS02",-21.8453,0.0,-42.24,idrotm[933],"ONLY"); |
| 4302 | gMC->Gspos("I203",6,"IS02",-21.8453,0.0,42.24,idrotm[878],"ONLY"); |
| 4303 | gMC->Gspos("I203",5,"IS02",-10.9227,18.9186,-42.24,idrotm[932],"ONLY"); |
| 4304 | gMC->Gspos("I203",4,"IS02",-10.9227,18.9186,42.24,idrotm[929],"ONLY"); |
| 4305 | gMC->Gspos("I203",3,"IS02",10.9227,18.9186,-42.24,idrotm[931],"ONLY"); |
| 4306 | gMC->Gspos("I203",2,"IS02",10.9227,18.9186,42.24,idrotm[853],"ONLY"); |
| 4307 | gMC->Gspos("I203",1,"IS02",21.8453,0.0,42.24,0,"ONLY"); |
| 4308 | gMC->Gspos("I095",1,"I098",0.0,0.0,0.0,0,"ONLY"); |
| 8f8273a4 |
4309 | |
| 4310 | //I096 and I098 are real volume that are really overlapping, can not use ONLY |
| 108bd0fe |
4311 | gMC->Gspos("I096",23,"I098",22.77,0.0,0.0,idrotm[894],"MANY"); |
| 4312 | gMC->Gspos("I096",14,"I098",22.3754,6.57,0.0,idrotm[895],"MANY"); |
| 4313 | gMC->Gspos("I096",3,"I098",19.1553,12.3104,0.0,idrotm[896],"MANY"); |
| 4314 | gMC->Gspos("I096",16,"I098",15.2714,17.6241,0.0,idrotm[897],"MANY"); |
| 4315 | gMC->Gspos("I096",5,"I098",9.459,20.7123,0.0,idrotm[899],"MANY"); |
| 4316 | gMC->Gspos("I096",18,"I098",3.3188,23.0826,0.0,idrotm[900],"MANY"); |
| 4317 | gMC->Gspos("I096",7,"I098",-3.2405,22.5382,0.0,idrotm[901],"MANY"); |
| 4318 | gMC->Gspos("I096",20,"I098",-9.6875,21.2126,0.0,idrotm[902],"MANY"); |
| 4319 | gMC->Gspos("I096",9,"I098",-14.9112,17.2084,0.0,idrotm[903],"MANY"); |
| 4320 | gMC->Gspos("I096",22,"I098",-19.618,12.6077,0.0,idrotm[904],"MANY"); |
| 4321 | gMC->Gspos("I096",11,"I098",-21.8477,6.4151,0.0,idrotm[905],"MANY"); |
| 4322 | gMC->Gspos("I096",24,"I098",-23.32,0.0,0.0,idrotm[906],"MANY"); |
| 4323 | gMC->Gspos("I096",13,"I098",-21.8477,-6.4151,0.0,idrotm[907],"MANY"); |
| 4324 | gMC->Gspos("I096",4,"I098",-19.618,-12.6077,0.0,idrotm[908],"MANY"); |
| 4325 | gMC->Gspos("I096",15,"I098",-14.9112,-17.2084,0.0,idrotm[909],"MANY"); |
| 4326 | gMC->Gspos("I096",6,"I098",-9.6875,-21.2126,0.0,idrotm[910],"MANY"); |
| 4327 | gMC->Gspos("I096",17,"I098",-3.2405,-22.5382,0.0,idrotm[911],"MANY"); |
| 4328 | gMC->Gspos("I096",8,"I098",3.3188,-23.0826,0.0,idrotm[912],"MANY"); |
| 4329 | gMC->Gspos("I096",19,"I098",9.459,-20.7123,0.0,idrotm[913],"MANY"); |
| 4330 | gMC->Gspos("I096",10,"I098",15.2714,-17.6241,0.0,idrotm[914],"MANY"); |
| 4331 | gMC->Gspos("I096",21,"I098",19.1553,-12.3104,0.0,idrotm[915],"MANY"); |
| 4332 | gMC->Gspos("I096",12,"I098",22.3754,-6.57,0.0,idrotm[916],"MANY"); |
| 8f8273a4 |
4333 | |
| 108bd0fe |
4334 | gMC->Gspos("I094",1,"I097",0.0,0.0,0.0,0,"ONLY"); |
| 8f8273a4 |
4335 | |
| 4336 | // idem |
| 108bd0fe |
4337 | gMC->Gspos("I096",1,"I097",13.87,0.0,0.0,idrotm[894],"MANY"); |
| 4338 | gMC->Gspos("I096",32,"I097",13.037,6.2783,0.0,idrotm[917],"MANY"); |
| 4339 | gMC->Gspos("I096",25,"I097",8.6478,10.844,0.0,idrotm[918],"MANY"); |
| 4340 | gMC->Gspos("I096",34,"I097",3.2199,14.1072,0.0,idrotm[919],"MANY"); |
| 4341 | gMC->Gspos("I096",27,"I097",-3.0864,13.5223,0.0,idrotm[920],"MANY"); |
| 4342 | gMC->Gspos("I096",36,"I097",-9.0219,11.3131,0.0,idrotm[921],"MANY"); |
| 4343 | gMC->Gspos("I096",29,"I097",-12.4964,6.018,0.0,idrotm[922],"MANY"); |
| 4344 | gMC->Gspos("I096",2,"I097",-14.47,0.0,0.0,idrotm[906],"MANY"); |
| 4345 | gMC->Gspos("I096",31,"I097",-12.4964,-6.018,0.0,idrotm[923],"MANY"); |
| 4346 | gMC->Gspos("I096",26,"I097",-9.0219,-11.3131,0.0,idrotm[924],"MANY"); |
| 4347 | gMC->Gspos("I096",33,"I097",-3.0864,-13.5223,0.0,idrotm[925],"MANY"); |
| 4348 | gMC->Gspos("I096",28,"I097",3.2199,-14.1072,0.0,idrotm[926],"MANY"); |
| 4349 | gMC->Gspos("I096",35,"I097",8.6478,-10.844,0.0,idrotm[927],"MANY"); |
| 4350 | gMC->Gspos("I096",30,"I097",13.037,-6.2783,0.0,idrotm[928],"MANY"); |
| 4351 | } |
| 4352 | |
| 4353 | // --- Place volumes of SSD cone ---------------------------------- |
| 4354 | |
| 4355 | if (! AliITSInitGeometry::SSDconeIsTGeoNative()) { |
| 4356 | |
| 8f8273a4 |
4357 | gMC->Gspos("I212",2,"IS01",0.0,0.0,0.0,idrotm[701],"ONLY"); |
| 4358 | gMC->Gspos("I212",1,"IS01",0.0,0.0,0.0,0,"ONLY"); |
| 108bd0fe |
4359 | gMC->Gspos("I211",1,"IS01",0.0,0.0,-56.5,0,"ONLY"); |
| bf210566 |
4360 | |
| 108bd0fe |
4361 | gMC->Gspos("I217",1,"IS01",0.0,0.0,-44.4,0,"ONLY"); // this will change after PPR to be symmetric |
| bf210566 |
4362 | // Unfortunately the following piece is not compatible with new SSD |
| 4363 | if (! AliITSInitGeometry::SSDIsTGeoNative()) |
| 4364 | gMC->Gspos("I219",1,"IS01",0.0,0.0,-50.25,0,"ONLY"); // this will change after PPR to be symmetric |
| 108bd0fe |
4365 | gMC->Gspos("I211",2,"IS01",0.0,0.0,56.5,idrotm[701],"ONLY"); |
| bf210566 |
4366 | |
| 4367 | // Unfortunately the following piece is not compatible with new SSD |
| 4368 | if (! AliITSInitGeometry::SSDIsTGeoNative()) |
| 4369 | gMC->Gspos("I219",2,"IS01",0.0,0.0,51.65,idrotm[701],"ONLY"); // this will change after PPR to be symmetric |
| 108bd0fe |
4370 | gMC->Gspos("I217",2,"IS01",0.0,0.0,45.8,idrotm[701],"ONLY"); // this will change after PPR to be symmetric |
| 4371 | gMC->Gspos("I214",2,"IS01",0.0,0.0,67.25,idrotm[701],"ONLY"); |
| 4372 | gMC->Gspos("I213",2,"IS01",0.0,0.0,62.25,idrotm[701],"ONLY"); |
| 4373 | gMC->Gspos("I213",1,"IS01",0.0,0.0,-62.25,0,"ONLY"); |
| 8f8273a4 |
4374 | gMC->Gspos("I214",1,"IS01",0.0,0.0,-67.25,0,"ONLY"); |
| 4375 | |
| 4376 | gMC->Gspos("I215",19,"IS01",0.0,0.0,0.0,idrotm[702],"ONLY"); |
| 4377 | gMC->Gspos("I215",21,"IS01",0.0,0.0,0.0,idrotm[703],"ONLY"); |
| 4378 | gMC->Gspos("I215",23,"IS01",0.0,0.0,0.0,idrotm[704],"ONLY"); |
| 4379 | gMC->Gspos("I215",24,"IS01",0.0,0.0,0.0,idrotm[705],"ONLY"); |
| 4380 | gMC->Gspos("I215",3,"IS01",0.0,0.0,0.0,idrotm[706],"ONLY"); |
| 4381 | gMC->Gspos("I215",5,"IS01",0.0,0.0,0.0,idrotm[707],"ONLY"); |
| 4382 | gMC->Gspos("I215",7,"IS01",0.0,0.0,0.0,idrotm[708],"ONLY"); |
| 4383 | gMC->Gspos("I215",9,"IS01",0.0,0.0,0.0,idrotm[709],"ONLY"); |
| 4384 | gMC->Gspos("I215",11,"IS01",0.0,0.0,0.0,idrotm[710],"ONLY"); |
| 4385 | gMC->Gspos("I215",13,"IS01",0.0,0.0,0.0,idrotm[711],"ONLY"); |
| 4386 | gMC->Gspos("I215",15,"IS01",0.0,0.0,0.0,idrotm[712],"ONLY"); |
| 4387 | gMC->Gspos("I215",17,"IS01",0.0,0.0,0.0,idrotm[713],"ONLY"); |
| bf210566 |
4388 | |
| 4389 | // Unfortunately the following piece is not compatible with new SSD |
| 4390 | if (! AliITSInitGeometry::SSDIsTGeoNative()) { |
| 4391 | gMC->Gspos("I216",9,"IS01",0.0,0.0,45.5,idrotm[714],"ONLY"); |
| 4392 | gMC->Gspos("I216",11,"IS01",0.0,0.0,45.5,idrotm[715],"ONLY"); |
| 4393 | gMC->Gspos("I216",12,"IS01",0.0,0.0,45.5,idrotm[716],"ONLY"); |
| 4394 | gMC->Gspos("I216",3,"IS01",0.0,0.0,45.5,idrotm[717],"ONLY"); |
| 4395 | gMC->Gspos("I216",5,"IS01",0.0,0.0,45.5,idrotm[718],"ONLY"); |
| 4396 | gMC->Gspos("I216",7,"IS01",0.0,0.0,45.5,idrotm[719],"ONLY"); |
| 4397 | gMC->Gspos("I216",10,"IS01",0.0,0.0,-44,idrotm[720],"ONLY"); |
| 4398 | gMC->Gspos("I216",1,"IS01",0.0,0.0,-44,idrotm[721],"ONLY"); |
| 4399 | gMC->Gspos("I216",2,"IS01",0.0,0.0,-44,idrotm[722],"ONLY"); |
| 4400 | gMC->Gspos("I216",4,"IS01",0.0,0.0,-44,idrotm[723],"ONLY"); |
| 4401 | gMC->Gspos("I216",6,"IS01",0.0,0.0,-44,idrotm[724],"ONLY"); |
| 4402 | gMC->Gspos("I216",8,"IS01",0.0,0.0,-44,idrotm[725],"ONLY"); |
| 4403 | } |
| 4404 | |
| 8f8273a4 |
4405 | gMC->Gspos("I215",1,"IS01",0.0,0.0,0.0,idrotm[726],"ONLY"); |
| 4406 | gMC->Gspos("I215",2,"IS01",0.0,0.0,0.0,idrotm[727],"ONLY"); |
| 4407 | gMC->Gspos("I215",4,"IS01",0.0,0.0,0.0,idrotm[728],"ONLY"); |
| 4408 | gMC->Gspos("I215",6,"IS01",0.0,0.0,0.0,idrotm[729],"ONLY"); |
| 4409 | gMC->Gspos("I215",8,"IS01",0.0,0.0,0.0,idrotm[733],"ONLY"); |
| 4410 | gMC->Gspos("I215",10,"IS01",0.0,0.0,0.0,idrotm[730],"ONLY"); |
| 4411 | gMC->Gspos("I215",12,"IS01",0.0,0.0,0.0,idrotm[731],"ONLY"); |
| 4412 | gMC->Gspos("I215",14,"IS01",0.0,0.0,0.0,idrotm[768],"ONLY"); |
| 4413 | gMC->Gspos("I215",16,"IS01",0.0,0.0,0.0,idrotm[732],"ONLY"); |
| 4414 | gMC->Gspos("I215",18,"IS01",0.0,0.0,0.0,idrotm[734],"ONLY"); |
| 4415 | gMC->Gspos("I215",20,"IS01",0.0,0.0,0.0,idrotm[798],"ONLY"); |
| 4416 | gMC->Gspos("I215",22,"IS01",0.0,0.0,0.0,idrotm[735],"ONLY"); |
| 108bd0fe |
4417 | } |
| 4418 | |
| 4419 | // --- Place subdetectors' mother volumes and supports' mother volumes |
| 4420 | // into ITS mother volume ITSD |
| 4421 | |
| 4422 | if (! AliITSInitGeometry::SPDIsTGeoNative()) |
| bf210566 |
4423 | gMC->Gspos("IT12",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SPD mother volume |
| 108bd0fe |
4424 | if (! AliITSInitGeometry::SDDIsTGeoNative()) |
| 8f8273a4 |
4425 | gMC->Gspos("IT34",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SDD mother volume |
| 108bd0fe |
4426 | if (! AliITSInitGeometry::SSDIsTGeoNative()) |
| 8f8273a4 |
4427 | gMC->Gspos("IT56",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SSD mother volume |
| 108bd0fe |
4428 | if (! AliITSInitGeometry::SDDconeIsTGeoNative()) |
| bf210566 |
4429 | gMC->Gspos("IS02",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SDD cones/supports |
| 108bd0fe |
4430 | if (! AliITSInitGeometry::SSDconeIsTGeoNative()) |
| bf210566 |
4431 | gMC->Gspos("IS01",1,"ITSD",0.0,0.0,0.0,0,"ONLY"); // SSD cones/supports |
| 108bd0fe |
4432 | |
| 4433 | |
| 4434 | // **************************** SERVICES ********************************* |
| 4435 | |
| 4436 | |
| 4437 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART |
| 4438 | // UPPER PART |
| 4439 | |
| 4440 | if (! AliITSInitGeometry::ServicesAreTGeoNative()) { |
| 4441 | |
| 4442 | dgh[0] = 46.; |
| 4443 | dgh[1] = 46.+1.0; |
| 4444 | dgh[2] = 9.5; |
| 4445 | dgh[3] = 12.; |
| 4446 | dgh[4] = 168.; |
| 4447 | |
| 4448 | gMC->Gsvolu("I1CU", "TUBS", idtmed[213], dgh, 5); |
| 4449 | gMC->Gspos("I1CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY"); |
| 4450 | gMC->Gspos("I1CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY"); |
| 4451 | |
| 4452 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART |
| 4453 | // LOWER PART |
| 4454 | |
| 4455 | dgh[0] = 46.; |
| 4456 | dgh[1] = 46.+1.0; |
| 4457 | dgh[2] = 9.5; |
| 4458 | dgh[3] = 192.; |
| 4459 | dgh[4] = 348.; |
| 4460 | |
| 4461 | gMC->Gsvolu("I2CU", "TUBS", idtmed[213], dgh, 5); |
| 4462 | gMC->Gspos("I2CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY"); |
| 4463 | gMC->Gspos("I2CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY"); |
| 4464 | |
| 4465 | |
| 4466 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART |
| 4467 | // UPPER PART |
| 4468 | |
| 4469 | dgh[0] = 46.+1.0; |
| 4470 | dgh[1] = 46.+1.0+1.5; |
| 4471 | dgh[2] = 9.5; |
| 4472 | dgh[3] = 12.; |
| 4473 | dgh[4] = 168.; |
| 4474 | |
| 4475 | gMC->Gsvolu("I1CC", "TUBS", idtmed[225], dgh, 5); |
| 4476 | gMC->Gspos("I1CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY"); |
| 4477 | gMC->Gspos("I1CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY"); |
| 4478 | |
| 4479 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART |
| 4480 | // LOWER PART |
| 4481 | |
| 4482 | dgh[0] = 46.+1.0; |
| 4483 | dgh[1] = 46.+1.0+1.5; |
| 4484 | dgh[2] = 9.5; |
| 4485 | dgh[3] = 192.; |
| 4486 | dgh[4] = 348.; |
| 4487 | |
| 4488 | gMC->Gsvolu("I2CC", "TUBS", idtmed[225], dgh, 5); |
| 4489 | gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY"); |
| 4490 | gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY"); |
| 4491 | |
| 108bd0fe |
4492 | // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES |
| 4493 | // UPPER PART |
| 4494 | |
| 4495 | dgh[0] = 46.; |
| 4496 | dgh[1] = 56.; |
| 4497 | dgh[2] = 2.25; |
| 4498 | dgh[3] = 12.; |
| 4499 | dgh[4] = 168.; |
| 4500 | |
| 4501 | gMC->Gsvolu("IPA1", "TUBS", idtmed[210], dgh, 5); |
| 4502 | gMC->Gspos("IPA1", 1, "ITSV", 0., 0., 95.25, 0, "ONLY"); |
| 4503 | gMC->Gspos("IPA1", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY"); |
| 4504 | |
| 4505 | // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES |
| 4506 | // LOWER PART |
| 4507 | |
| 4508 | dgh[0] = 46.; |
| 4509 | dgh[1] = 56.; |
| 4510 | dgh[2] = 2.25; |
| 4511 | dgh[3] = 192.; |
| 4512 | dgh[4] = 348.; |
| 4513 | |
| 4514 | gMC->Gsvolu("IPA2", "TUBS", idtmed[210], dgh, 5); |
| 4515 | gMC->Gspos("IPA2", 1, "ITSV", 0., 0., 95.25, 0, "ONLY"); |
| 4516 | gMC->Gspos("IPA2", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY"); |
| 4517 | |
| 4518 | |
| 4519 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART |
| 4520 | // UPPER PART |
| 4521 | |
| e9ae6a14 |
4522 | dgh[0] = (ztpc-97.5-2.3)/2.; |
| 108bd0fe |
4523 | dgh[1] = 46.2; |
| 4524 | dgh[2] = 46.2+1.0; |
| 4525 | dgh[3] = 62.3; |
| 4526 | dgh[4] = 62.3+1.0; |
| 4527 | dgh[5] = 12.; |
| 4528 | dgh[6] = 168.; |
| 4529 | gMC->Gsvolu("ICU1", "CONS", idtmed[213], dgh, 7); |
| e9ae6a14 |
4530 | // gMC->Gspos("ICU1", 1, "ITSV", 0., 0.,97.5+dgh[0], 0, "ONLY"); |
| 4531 | gMC->Gspos("ICU1", 1, "ITSV", 0., 0.,-(97.5+dgh[0]+4.6), idrotm[199], "ONLY"); |
| 108bd0fe |
4532 | |
| 4533 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART |
| 4534 | // LOWER PART |
| 4535 | |
| e9ae6a14 |
4536 | dgh[0] = (ztpc-97.5-2.3)/2.; |
| 108bd0fe |
4537 | dgh[1] = 46.2; |
| 4538 | dgh[2] = 46.2+1.0; |
| 4539 | dgh[3] = 62.3; |
| 4540 | dgh[4] = 62.3+1.0; |
| 4541 | dgh[5] = 192.; |
| 4542 | dgh[6] = 348.; |
| 4543 | gMC->Gsvolu("ICU2", "CONS", idtmed[213], dgh, 7); |
| e9ae6a14 |
4544 | // gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY"); |
| 4545 | gMC->Gspos("ICU2", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY"); |
| 108bd0fe |
4546 | |
| 4547 | |
| 4548 | // -- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART |
| 4549 | // UPPER PART |
| 4550 | |
| e9ae6a14 |
4551 | dgh[0] = (ztpc-97.5-2.3)/2.; |
| 108bd0fe |
4552 | dgh[1] = 46.2+1.0; |
| 4553 | dgh[2] = 46.2+1.0+1.5; |
| 4554 | dgh[3] = 62.3+1.0; |
| 4555 | dgh[4] = 62.3+1.0+1.5; |
| 4556 | dgh[5] = 12.; |
| 4557 | dgh[6] = 168.; |
| 4558 | gMC->Gsvolu("ICC1", "CONS", idtmed[225], dgh, 7); |
| e9ae6a14 |
4559 | // gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY"); |
| 4560 | gMC->Gspos("ICC1", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY"); |
| 108bd0fe |
4561 | |
| 4562 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART |
| 4563 | // LOWER PART |
| 4564 | |
| e9ae6a14 |
4565 | dgh[0] = (ztpc-97.5-2.3)/2.; |
| 108bd0fe |
4566 | dgh[1] = 46.2+1.0; |
| 4567 | dgh[2] = 46.2+1.0+1.5; |
| 4568 | dgh[3] = 62.3+1.0; |
| 4569 | dgh[4] = 62.3+1.0+1.5; |
| 4570 | dgh[5] = 192.; |
| 4571 | dgh[6] = 348.; |
| 4572 | gMC->Gsvolu("ICC2", "CONS", idtmed[225], dgh, 7); |
| e9ae6a14 |
4573 | // gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY"); |
| 4574 | gMC->Gspos("ICC2", 1, "ITSV", 0., 0., -(97.5+dgh[0]+4.6), idrotm[199], "ONLY"); |
| 108bd0fe |
4575 | |
| 4576 | // -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART |
| 4577 | // UPPER PART |
| 4578 | |
| e9ae6a14 |
4579 | dgh[0] = 62.2; |
| 108bd0fe |
4580 | dgh[1] = 74.5; |
| 4581 | dgh[2] = 0.5; |
| 4582 | dgh[3] = 12.; |
| 4583 | dgh[4] = 168.; |
| 4584 | gMC->Gsvolu("ICU3", "TUBS", idtmed[213], dgh, 5); |
| e9ae6a14 |
4585 | // gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY"); |
| 4586 | gMC->Gspos("ICU3", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]+1.), idrotm[199], "ONLY"); |
| 108bd0fe |
4587 | |
| 4588 | // -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART |
| 4589 | // LOWER PART |
| 4590 | |
| e9ae6a14 |
4591 | dgh[0] = 62.2; |
| 108bd0fe |
4592 | dgh[1] = 74.5; |
| 4593 | dgh[2] = 0.5; |
| 4594 | dgh[3] = 192.; |
| 4595 | dgh[4] = 348.; |
| 4596 | gMC->Gsvolu("ICU4", "TUBS", idtmed[213], dgh, 5); |
| e9ae6a14 |
4597 | // gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY"); |
| 4598 | gMC->Gspos("ICU4", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]+1.), idrotm[199], "ONLY"); |
| 108bd0fe |
4599 | |
| 4600 | // -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART |
| 4601 | // UPPER PART |
| 4602 | |
| e9ae6a14 |
4603 | dgh[0] = 64.8; |
| 108bd0fe |
4604 | dgh[1] = 74.5; |
| 4605 | dgh[2] = 0.75; |
| 4606 | dgh[3] = 12.; |
| 4607 | dgh[4] = 168.; |
| 4608 | gMC->Gsvolu("ICC3", "TUBS", idtmed[225], dgh, 5); |
| e9ae6a14 |
4609 | // gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY"); |
| 4610 | gMC->Gspos("ICC3", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[199], "ONLY"); |
| 108bd0fe |
4611 | |
| 4612 | // -- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART |
| 4613 | // LOWER PART |
| 4614 | |
| e9ae6a14 |
4615 | dgh[0] = 64.8; |
| 108bd0fe |
4616 | dgh[1] = 74.5; |
| 4617 | dgh[2] = 0.75; |
| 4618 | dgh[3] = 192.; |
| 4619 | dgh[4] = 348.; |
| 4620 | gMC->Gsvolu("ICC4", "TUBS", idtmed[225], dgh, 5); |
| e9ae6a14 |
4621 | // gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY"); |
| 4622 | gMC->Gspos("ICC4", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), idrotm[199], "ONLY"); |
| 108bd0fe |
4623 | |
| 798b4e0c |
4624 | |
| 108bd0fe |
4625 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
| 4626 | // THE ABSORBER - COPPER PART - UPPER PART |
| 00c97beb |
4627 | |
| 108bd0fe |
4628 | dgh[0] = 46.; |
| 4629 | dgh[1] = 46.+1.0; |
| 00c97beb |
4630 | // dgh[2] = (ztpc-97.5+1.5-2.5)/2.; |
| 4631 | dgh[2] = (186.6 - 101.1)/2.; |
| 108bd0fe |
4632 | dgh[3] = 12.; |
| 4633 | dgh[4] = 168.; |
| 4634 | gMC->Gsvolu("ICU5", "TUBS", idtmed[213], dgh, 5); |
| e9ae6a14 |
4635 | // gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
| 00c97beb |
4636 | gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY"); |
| 4637 | |
| 4638 | dgh[0] = (ztpc - 1.0 - 186.6)/2.; |
| 4639 | dgh[1] = 64.0; |
| 4640 | dgh[2] = 64.0+1.0; |
| 4641 | dgh[3] = 46.; |
| 4642 | dgh[4] = 46.+1.0; |
| 4643 | dgh[5] = 12.; |
| 4644 | dgh[6] = 168.; |
| 4645 | gMC->Gsvolu("ICU9", "CONS", idtmed[213], dgh, 7); |
| 4646 | gMC->Gspos("ICU9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY"); |
| 4647 | |
| 108bd0fe |
4648 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
| 4649 | // THE ABSORBER - COPPER PART - LOWER PART |
| 4650 | |
| 4651 | dgh[0] = 46.; |
| 4652 | dgh[1] = 46.+1.0; |
| 00c97beb |
4653 | // dgh[2] = (ztpc-97.5+1.5-2.5)/2.; |
| 4654 | dgh[2] = (186.6 - 101.1)/2.; |
| 108bd0fe |
4655 | dgh[3] = 192.; |
| 4656 | dgh[4] = 348.; |
| 4657 | gMC->Gsvolu("ICU6", "TUBS", idtmed[213], dgh, 5); |
| e9ae6a14 |
4658 | // gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
| 00c97beb |
4659 | gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY"); |
| 4660 | |
| 4661 | dgh[0] = (ztpc - 1.0 - 186.6)/2.; |
| 4662 | dgh[1] = 64.0; |
| 4663 | dgh[2] = 64.0+1.0; |
| 4664 | dgh[3] = 46.; |
| 4665 | dgh[4] = 46.+1.0; |
| 4666 | dgh[5] = 192.; |
| 4667 | dgh[6] = 348.; |
| 4668 | gMC->Gsvolu("ICU0", "CONS", idtmed[213], dgh, 7); |
| 4669 | gMC->Gspos("ICU0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY"); |
| 4670 | |
| 108bd0fe |
4671 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
| 4672 | // THE ABSORBER - CARBON PART - UPPER PART |
| 4673 | |
| 4674 | dgh[0] = 46.+1.0; |
| 4675 | dgh[1] = 46.+1.0+1.5; |
| 00c97beb |
4676 | // dgh[2] = (ztpc-97.5)/2.; |
| 4677 | dgh[2] = (186.6 - 101.1)/2.; |
| 108bd0fe |
4678 | dgh[3] = 12.; |
| 4679 | dgh[4] = 168.; |
| 4680 | gMC->Gsvolu("ICC5", "TUBS", idtmed[225], dgh, 5); |
| e9ae6a14 |
4681 | // gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
| 00c97beb |
4682 | gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY"); |
| 108bd0fe |
4683 | |
| 00c97beb |
4684 | dgh[0] = (ztpc - 1.0 - 186.6)/2.; |
| 4685 | dgh[1] = 64.0+1.0; |
| 4686 | dgh[2] = 64.0+1.0+1.5; |
| 4687 | dgh[3] = 46.+1.0; |
| 4688 | dgh[4] = 46.+1.0+1.5; |
| 4689 | dgh[5] = 12.; |
| 4690 | dgh[6] = 168.; |
| 4691 | gMC->Gsvolu("ICC9", "CONS", idtmed[225], dgh, 7); |
| 4692 | gMC->Gspos("ICC9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY"); |
| 4693 | |
| 108bd0fe |
4694 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
| 4695 | // THE ABSORBER - CARBON PART - LOWER PART |
| 4696 | |
| 4697 | dgh[0] = 46.+1.0; |
| 4698 | dgh[1] = 46.+1.0+1.5; |
| 00c97beb |
4699 | // dgh[2] = (ztpc-97.5)/2.; |
| 4700 | dgh[2] = (186.6 - 101.1)/2.; |
| 108bd0fe |
4701 | dgh[3] = 192.; |
| 4702 | dgh[4] = 348.; |
| 4703 | gMC->Gsvolu("ICC6", "TUBS", idtmed[225], dgh, 5); |
| e9ae6a14 |
4704 | // gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
| 00c97beb |
4705 | gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY"); |
| 4706 | |
| 4707 | dgh[0] = (ztpc - 1.0 - 186.6)/2.; |
| 4708 | dgh[1] = 64.0+1.0; |
| 4709 | dgh[2] = 64.0+1.0+1.5; |
| 4710 | dgh[3] = 46.+1.0; |
| 4711 | dgh[4] = 46.+1.0+1.5; |
| 4712 | dgh[5] = 192.; |
| 4713 | dgh[6] = 348.; |
| 4714 | gMC->Gsvolu("ICC0", "CONS", idtmed[225], dgh, 7); |
| 4715 | gMC->Gspos("ICC0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY"); |
| 108bd0fe |
4716 | |
| 4b5e7b0c |
4717 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
| 4718 | // THE ABSORBER - ALUMINUM PART - UPPER PART |
| 4719 | |
| 4720 | dgh[0] = 46.+1.0+1.5; |
| 4721 | dgh[1] = 46.+1.0+1.5+0.4; |
| 4722 | // dgh[2] = (ztpc-97.5)/2.; |
| 4723 | dgh[2] = (186.6 - 101.1)/2.; |
| 4724 | dgh[3] = 12.; |
| 4725 | dgh[4] = 168.; |
| 4726 | gMC->Gsvolu("ICK5", "TUBS", idtmed[210], dgh, 5); |
| 4727 | // gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
| 4728 | gMC->Gspos("ICK5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY"); |
| 4729 | |
| 4730 | dgh[0] = (ztpc - 1.0 - 186.6)/2.; |
| 4731 | dgh[1] = 64.0+1.0+1.5; |
| 4732 | dgh[2] = 64.0+1.0+1.5+0.4; |
| 4733 | dgh[3] = 46.+1.0+1.5; |
| 4734 | dgh[4] = 46.+1.0+1.5+0.4; |
| 4735 | dgh[5] = 12.; |
| 4736 | dgh[6] = 168.; |
| 4737 | gMC->Gsvolu("ICK9", "CONS", idtmed[210], dgh, 7); |
| 4738 | gMC->Gspos("ICK9", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY"); |
| 4739 | |
| 4740 | |
| 4741 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4742 | dgh[1] = 46.+1.0+1.5+0.4+5.5; |
| 4743 | dgh[2] = 4.0/2; |
| 4744 | dgh[3] = 12.; |
| 4745 | dgh[4] = 168.; |
| 4746 | gMC->Gsvolu("IKK7", "TUBS", idtmed[210], dgh, 5); |
| 4747 | // gMC->Gspos("IKK7", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY"); |
| 4748 | gMC->Gspos("IKK7", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+34+31.8), idrotm[199], "ONLY"); |
| 4749 | |
| 4750 | |
| 4751 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4752 | dgh[1] = 46.+1.0+1.5+0.4+0.3; |
| 4753 | dgh[2] = 34.0/2; |
| 4754 | dgh[3] = 12.; |
| 4755 | dgh[4] = 168.; |
| 4756 | gMC->Gsvolu("IKK5", "TUBS", idtmed[210], dgh, 5); |
| 4757 | // gMC->Gspos("IKK5", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4), idrotm[199], "ONLY"); |
| 4758 | gMC->Gspos("IKK5", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+31.8), idrotm[199], "ONLY"); |
| 4759 | |
| 4760 | |
| 4761 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4762 | dgh[1] = 46.+1.0+1.5+0.4+5.5; |
| 4763 | dgh[2] = 4.0/2; |
| 4764 | dgh[3] = 12.; |
| 4765 | dgh[4] = 168.; |
| 4766 | gMC->Gsvolu("IKK3", "TUBS", idtmed[210], dgh, 5); |
| 4767 | // gMC->Gspos("IKK3", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34), idrotm[199], "ONLY"); |
| 4768 | gMC->Gspos("IKK3", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+31.8), idrotm[199], "ONLY"); |
| 4769 | |
| 4770 | |
| 4771 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4772 | dgh[1] = 46.+1.0+1.5+0.4+6.0; |
| 4773 | dgh[2] = 5.0/2; |
| 4774 | dgh[3] = 12.; |
| 4775 | dgh[4] = 168.; |
| 4776 | gMC->Gsvolu("IKK1", "TUBS", idtmed[210], dgh, 5); |
| 4777 | // gMC->Gspos("IKK1", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34-4), idrotm[199], "ONLY"); |
| 4778 | gMC->Gspos("IKK1", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+31.8), idrotm[199], "ONLY"); |
| 4779 | |
| 4780 | |
| 4781 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4782 | dgh[1] = 46.+1.0+1.5+0.4+0.3; |
| 4783 | dgh[2] = 31.8/2; |
| 4784 | dgh[3] = 12.; |
| 4785 | dgh[4] = 168.; |
| 4786 | gMC->Gsvolu("IKK9", "TUBS", idtmed[210], dgh, 5); |
| 4787 | gMC->Gspos("IKK9", 1, "ITSV", 0., 0., -(-186.6+dgh[2]), idrotm[199], "ONLY"); |
| 4788 | |
| 4789 | |
| 4790 | dgh[0] = 66.2/2; |
| 4791 | dgh[1] = 46.+1.0+1.5+0.4+12.5; |
| 4792 | dgh[2] = 46.+1.0+1.5+0.4+12.5+0.3; |
| 4793 | dgh[3] = 46.+1.0+1.5+0.4; |
| 4794 | dgh[4] = 46.+1.0+1.5+0.4+0.3; |
| 4795 | dgh[5] = 12.; |
| 4796 | dgh[6] = 168.; |
| 4797 | gMC->Gsvolu("ICK7", "CONS", idtmed[210], dgh, 7); |
| 4798 | gMC->Gspos("ICK7", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY"); |
| 4799 | |
| 4800 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
| 4801 | // THE ABSORBER - ALUMINUM PART - LOWER PART |
| 4802 | |
| 4803 | dgh[0] = 46.+1.0+1.5; |
| 4804 | dgh[1] = 46.+1.0+1.5+0.4; |
| 4805 | // dgh[2] = (ztpc-97.5)/2.; |
| 4806 | dgh[2] = (186.6 - 101.1)/2.; |
| 4807 | dgh[3] = 192.; |
| 4808 | dgh[4] = 348.; |
| 4809 | gMC->Gsvolu("ICK6", "TUBS", idtmed[210], dgh, 5); |
| 4810 | // gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
| 4811 | gMC->Gspos("ICK6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY"); |
| 4812 | |
| 4813 | dgh[0] = (ztpc - 1.0 - 186.6)/2.; |
| 4814 | dgh[1] = 64.0+1.0+1.5; |
| 4815 | dgh[2] = 64.0+1.0+1.5+0.4; |
| 4816 | dgh[3] = 46.+1.0+1.5; |
| 4817 | dgh[4] = 46.+1.0+1.5+0.4; |
| 4818 | dgh[5] = 192.; |
| 4819 | dgh[6] = 348.; |
| 4820 | gMC->Gsvolu("ICK0", "CONS", idtmed[210], dgh, 7); |
| 4821 | gMC->Gspos("ICK0", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY"); |
| 4822 | |
| 4823 | |
| 4824 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4825 | dgh[1] = 46.+1.0+1.5+0.4+5.5; |
| 4826 | dgh[2] = 4.0/2; |
| 4827 | dgh[3] = 192.; |
| 4828 | dgh[4] = 348.; |
| 4829 | gMC->Gsvolu("IKK8", "TUBS", idtmed[210], dgh, 5); |
| 4830 | // gMC->Gspos("IKK8", 1, "ITSV", 0., 0., -(-101.1-dgh[2]), idrotm[199], "ONLY"); |
| 4831 | gMC->Gspos("IKK8", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+34+31.8), idrotm[199], "ONLY"); |
| 4832 | |
| 4833 | |
| 4834 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4835 | dgh[1] = 46.+1.0+1.5+0.4+0.3; |
| 4836 | dgh[2] = 34.0/2; |
| 4837 | dgh[3] = 192.; |
| 4838 | dgh[4] = 348.; |
| 4839 | gMC->Gsvolu("IKK6", "TUBS", idtmed[210], dgh, 5); |
| 4840 | // gMC->Gspos("IKK6", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4), idrotm[199], "ONLY"); |
| 4841 | gMC->Gspos("IKK6", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+4+31.8), idrotm[199], "ONLY"); |
| 4842 | |
| 4843 | |
| 4844 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4845 | dgh[1] = 46.+1.0+1.5+0.4+5.5; |
| 4846 | dgh[2] = 4.0/2; |
| 4847 | dgh[3] = 192.; |
| 4848 | dgh[4] = 348.; |
| 4849 | gMC->Gsvolu("IKK4", "TUBS", idtmed[210], dgh, 5); |
| 4850 | // gMC->Gspos("IKK4", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34), idrotm[199], "ONLY"); |
| 4851 | gMC->Gspos("IKK4", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+5+31.8), idrotm[199], "ONLY"); |
| 4852 | |
| 4853 | |
| 4854 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4855 | dgh[1] = 46.+1.0+1.5+0.4+6.0; |
| 4856 | dgh[2] = 5.0/2; |
| 4857 | dgh[3] = 192.; |
| 4858 | dgh[4] = 348.; |
| 4859 | gMC->Gsvolu("IKK2", "TUBS", idtmed[210], dgh, 5); |
| 4860 | // gMC->Gspos("IKK2", 1, "ITSV", 0., 0., -(-101.1-dgh[2]-4-34-4), idrotm[199], "ONLY"); |
| 4861 | gMC->Gspos("IKK2", 1, "ITSV", 0., 0., -(-186.6+dgh[2]+31.8), idrotm[199], "ONLY"); |
| 4862 | |
| 4863 | |
| 4864 | dgh[0] = 46.+1.0+1.5+0.4; |
| 4865 | dgh[1] = 46.+1.0+1.5+0.4+0.3; |
| 4866 | dgh[2] = 31.8/2; |
| 4867 | dgh[3] = 192.; |
| 4868 | dgh[4] = 348.; |
| 4869 | gMC->Gsvolu("IKK0", "TUBS", idtmed[210], dgh, 5); |
| 4870 | gMC->Gspos("IKK0", 1, "ITSV", 0., 0., -(-186.6+dgh[2]), idrotm[199], "ONLY"); |
| 4871 | |
| 4872 | |
| 4873 | dgh[0] = 66.2/2; |
| 4874 | dgh[1] = 46.+1.0+1.5+0.4+12.5; |
| 4875 | dgh[2] = 46.+1.0+1.5+0.4+12.5+0.3; |
| 4876 | dgh[3] = 46.+1.0+1.5+0.4; |
| 4877 | dgh[4] = 46.+1.0+1.5+0.4+0.3; |
| 4878 | dgh[5] = 192.; |
| 4879 | dgh[6] = 348.; |
| 4880 | gMC->Gsvolu("ICK8", "CONS", idtmed[210], dgh, 7); |
| 4881 | gMC->Gspos("ICK8", 1, "ITSV", 0., 0., -(-186.6-dgh[0]), idrotm[199], "ONLY"); |
| 4882 | |
| 4883 | |
| 108bd0fe |
4884 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
| 4885 | // COPPER PART - UPPER PART |
| 4886 | |
| 00c97beb |
4887 | dgh[0] = 64.0; |
| 108bd0fe |
4888 | dgh[1] = 74.5; |
| 4889 | dgh[2] = 0.5; |
| 4890 | dgh[3] = 12.; |
| 4891 | dgh[4] = 168.; |
| 4892 | gMC->Gsvolu("ICU7", "TUBS", idtmed[213], dgh, 5); |
| e9ae6a14 |
4893 | gMC->Gspos("ICU7", 1, "ITSV", 0., 0., (ztpc+1.5+dgh[2]), idrotm[199], "ONLY"); |
| 108bd0fe |
4894 | |
| 4895 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
| 4896 | // COPPER PART - LOWER PART |
| 4897 | |
| 00c97beb |
4898 | dgh[0] = 64.0; |
| 108bd0fe |
4899 | dgh[1] = 74.5; |
| 4900 | dgh[2] = 0.5; |
| 4901 | dgh[3] = 192.; |
| 4902 | dgh[4] = 348.; |
| 4903 | gMC->Gsvolu("ICU8", "TUBS", idtmed[213], dgh, 5); |
| e9ae6a14 |
4904 | gMC->Gspos("ICU8", 1, "ITSV", 0., 0., (ztpc+1.5+dgh[2]), idrotm[199], "ONLY"); |
| 108bd0fe |
4905 | |
| 4906 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
| 4907 | // CARBON PART - UPPER PART |
| 4908 | |
| 00c97beb |
4909 | dgh[0] = 64.0+1.0; |
| 108bd0fe |
4910 | dgh[1] = 74.5; |
| 4911 | dgh[2] = 0.75; |
| 4912 | dgh[3] = 12.; |
| 4913 | dgh[4] = 168.; |
| 4914 | gMC->Gsvolu("ICC7", "TUBS", idtmed[225], dgh, 5); |
| e9ae6a14 |
4915 | gMC->Gspos("ICC7", 1, "ITSV", 0., 0., (ztpc+dgh[2]), idrotm[199], "ONLY"); |
| 108bd0fe |
4916 | |
| 4917 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
| 4918 | // CARBON PART - LOWER PART |
| 4919 | |
| 00c97beb |
4920 | dgh[0] = 64.0+1.0; |
| 108bd0fe |
4921 | dgh[1] = 74.5; |
| 4922 | dgh[2] = 0.75; |
| 4923 | dgh[3] = 192.; |
| 4924 | dgh[4] = 348.; |
| 4925 | gMC->Gsvolu("ICC8", "TUBS", idtmed[225], dgh, 5); |
| e9ae6a14 |
4926 | gMC->Gspos("ICC8", 1, "ITSV", 0., 0., (ztpc+dgh[2]), idrotm[199], "ONLY"); |
| 4927 | |
| b984aa76 |
4928 | |
| 108bd0fe |
4929 | |
| 4930 | // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART |
| 4931 | |
| e9ae6a14 |
4932 | dgh[0] = 74.7; |
| 4933 | dgh[1] = 75.3; |
| 108bd0fe |
4934 | dgh[2] = 2.5; |
| 4935 | dgh[3] = 12.; |
| 4936 | dgh[4] = 168.; |
| 4937 | gMC->Gsvolu("IHK1", "TUBS", idtmed[264], dgh, 5); |
| e9ae6a14 |
4938 | gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -(-ztpc-dgh[2]), idrotm[199], "ONLY"); |
| 108bd0fe |
4939 | |
| 4940 | // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART |
| 4941 | |
| e9ae6a14 |
4942 | dgh[0] = 74.7; |
| 4943 | dgh[1] = 75.3; |
| 108bd0fe |
4944 | dgh[2] = 2.5; |
| 4945 | dgh[3] = 192.; |
| 4946 | dgh[4] = 348.; |
| 4947 | gMC->Gsvolu("IHK2", "TUBS", idtmed[264], dgh, 5); |
| e9ae6a14 |
4948 | gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -(-ztpc-dgh[2]), idrotm[199], "ONLY"); |
| 108bd0fe |
4949 | |
| 798b4e0c |
4950 | } |
| 108bd0fe |
4951 | |
| 4952 | |
| 4953 | // --- DEFINE RAILS BETWEEN THE ITS AND THE TPC |
| 4954 | if (! AliITSInitGeometry::SupportIsTGeoNative()) { |
| 4955 | |
| 4956 | if (rails == 1) { |
| 4957 | |
| 4958 | dgh[0] = 2.; |
| 4959 | dgh[1] = 8.; |
| 4960 | dgh[2] = 190.; |
| 4961 | gMC->Gsvolu("IRA1", "BOX ", idtmed[268], dgh, 3); |
| e9ae6a14 |
4962 | gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., 69.5, idrotm[199], "ONLY"); |
| 108bd0fe |
4963 | gMC->Gsvolu("IRA2", "BOX ", idtmed[268], dgh, 3); |
| e9ae6a14 |
4964 | gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., 69.5, idrotm[199], "ONLY"); |
| 108bd0fe |
4965 | |
| 4966 | dgh[0] = 2.-0.5;// 0.5 was determined in such a way that the aluminum area is 20.9 cm^2 |
| 4967 | dgh[1] = 8.-0.5;// 0.5 was determined in such a way that the aluminum area is 20.9 cm^2 |
| 4968 | dgh[2] = 190.; |
| 4969 | gMC->Gsvolu("IRA3", "BOX ", idtmed[205], dgh, 3); |
| 4970 | gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY"); |
| 4971 | gMC->Gsvolu("IRA4", "BOX ", idtmed[205], dgh, 3); |
| 4972 | gMC->Gspos("IRA4", 1, "IRA2", 0., 0., 0., 0, "ONLY"); |
| 4973 | |
| 4974 | } |
| 4975 | |
| 4976 | // --- DEFINE CYLINDERS HOLDING RAILS BETWEEN THE ITS AND THE TPC |
| 4977 | |
| 4978 | dgh[0] = 56.9; |
| 4979 | dgh[1] = 59.; |
| 4980 | dgh[2] = 0.6; |
| 4981 | gMC->Gsvolu("ICYL", "TUBE", idtmed[210], dgh, 3); |
| 1c5895a3 |
4982 | gMC->Gspos("ICYL", 1, "ITSS", 0., 0., -74.1,idrotm[199], "ONLY"); |
| 4983 | gMC->Gspos("ICYL", 2, "ITSS", 0., 0., 74.1, 0, "ONLY"); |
| 108bd0fe |
4984 | |
| 4985 | // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS |
| 4986 | |
| 4987 | dgh[0] = 0.; |
| 4988 | dgh[1] = 3.; |
| 4989 | dgh[2] = 5.;// 5. comes from the fact that the volume has to be 567.6/2 cm^3 |
| 4990 | gMC->Gsvolu("ISR1", "TUBE", idtmed[284], dgh, 3); |
| 1c5895a3 |
4991 | gMC->Gspos("ISR1", 1, "ITSS", 53.4292, 10.7053, -79.75,idrotm[199],"ONLY"); |
| 4992 | gMC->Gspos("ISR1", 2, "ITSS", 53.4292, -10.7053, -79.75,idrotm[199],"ONLY"); |
| 4993 | gMC->Gspos("ISR1", 3, "ITSS", -53.4292, 10.7053, -79.75,idrotm[199],"ONLY"); |
| 4994 | gMC->Gspos("ISR1", 4, "ITSS", -53.4292, -10.7053, -79.75,idrotm[199],"ONLY"); |
| 4995 | gMC->Gspos("ISR1", 5, "ITSS", 53.4292, 10.7053, 79.75,idrotm[199],"ONLY"); |
| 4996 | gMC->Gspos("ISR1", 6, "ITSS", 53.4292, -10.7053, 79.75,idrotm[199],"ONLY"); |
| 4997 | gMC->Gspos("ISR1", 7, "ITSS", -53.4292, 10.7053, 79.75,idrotm[199],"ONLY"); |
| 4998 | gMC->Gspos("ISR1", 8, "ITSS", -53.4292, -10.7053, 79.75,idrotm[199],"ONLY"); |
| 108bd0fe |
4999 | |
| 5000 | // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER |
| 5001 | |
| 5002 | dgh[0] = 5.; |
| 5003 | dgh[1] = 12.; |
| 5004 | dgh[2] = 5.; |
| 5005 | gMC->Gsvolu("ISR2", "BOX ", idtmed[210], dgh, 3); |
| 1c5895a3 |
5006 | gMC->Gspos("ISR2", 1, "ITSS", -53.5, 0., 125.5, 0, "ONLY"); |
| 108bd0fe |
5007 | gMC->Gsvolu("ISR3", "BOX ", idtmed[210], dgh, 3); |
| 1c5895a3 |
5008 | gMC->Gspos("ISR3", 1, "ITSS", 53.5, 0., 125.5, 0, "ONLY"); |
| 108bd0fe |
5009 | |
| 5010 | dgh[0] = 5.-2.; |
| 5011 | dgh[1] = 12.-2.; |
| 5012 | dgh[2] = 5.; |
| 5013 | gMC->Gsvolu("ISR4", "BOX ", idtmed[205], dgh, 3); |
| 5014 | gMC->Gspos("ISR4", 1, "ISR2", 0., 0., 0., 0, "ONLY"); |
| 5015 | gMC->Gsvolu("ISR5", "BOX ", idtmed[205], dgh, 3); |
| 5016 | gMC->Gspos("ISR5", 1, "ISR3", 0., 0., 0., 0, "ONLY"); |
| 5017 | |
| 5018 | // --- DEFINE SUPPORTS TO ATTACH THE ITS TO THE TPC |
| 5019 | |
| 5020 | dgh[0] = 0.; |
| 5021 | dgh[1] = 5.; |
| 5022 | dgh[2] = 2.; |
| 5023 | gMC->Gsvolu("ISR6", "TUBE", idtmed[210], dgh, 3); |
| 1c5895a3 |
5024 | gMC->Gspos("ISR6", 1, "ITSS", 0., 54., 77., 0, "ONLY"); |
| 5025 | gMC->Gspos("ISR6", 2, "ITSS", 0., 54., -77., 0, "ONLY"); |
| 5026 | gMC->Gspos("ISR6", 3, "ITSS", 0., -54., -77., 0, "ONLY"); |
| 108bd0fe |
5027 | |
| 5028 | } |
| 5029 | |
| 108bd0fe |
5030 | { |
| 5031 | if (!gGeoManager) { |
| 5032 | AliError("TGeoManager doesn't exist !"); |
| 5033 | return; |
| 5034 | } |
| 5035 | |
| 5036 | //====== Converting mother volumes of alignable objects |
| 5037 | //====== into TGeoAssemblies : |
| 5038 | |
| 5039 | TObjArray *list = gGeoManager->GetListOfVolumes(); |
| 5040 | |
| 5041 | if (! AliITSInitGeometry::SPDIsTGeoNative()) { |
| 5042 | char spdLaddName[20] = "I10B"; |
| 5043 | |
| 5044 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName); |
| 5045 | Int_t index = list->IndexOf(toTransform); |
| 5046 | do { |
| 5047 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5048 | if (toTransform) |
| 5049 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5050 | if (transformed) |
| 5051 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5052 | index++; |
| 5053 | toTransform = (TGeoVolume*)list->At(index); |
| 5054 | } |
| 5055 | while (strcmp(spdLaddName,toTransform->GetName()) == 0); |
| 5056 | } |
| 5057 | |
| 5058 | // SPD 2 |
| 5059 | if (! AliITSInitGeometry::SPDIsTGeoNative()) { |
| 5060 | char spdLaddName[20] = "I20B"; |
| 5061 | |
| 5062 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName); |
| 5063 | Int_t index = list->IndexOf(toTransform); |
| 5064 | do { |
| 5065 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5066 | if (toTransform) |
| 5067 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5068 | if (transformed) |
| 5069 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5070 | index++; |
| 5071 | toTransform = (TGeoVolume*)list->At(index); |
| 5072 | } |
| 5073 | while (strcmp(spdLaddName, toTransform->GetName()) == 0); |
| 5074 | } |
| 5075 | |
| 5076 | //--- |
| 5077 | |
| 5078 | // SPD 1 |
| 5079 | if (! AliITSInitGeometry::SPDIsTGeoNative()) { |
| 5080 | char spdLaddName[20] = "I107"; // "I107" |
| 5081 | |
| 5082 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName); |
| 5083 | Int_t index = list->IndexOf(toTransform); |
| 5084 | do { |
| 5085 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5086 | if (toTransform) |
| 5087 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5088 | if (transformed) |
| 5089 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5090 | index++; |
| 5091 | toTransform = (TGeoVolume*)list->At(index); |
| 5092 | } |
| 5093 | while (strcmp(spdLaddName,toTransform->GetName()) == 0); |
| 5094 | } |
| 5095 | |
| 5096 | // SPD 2 |
| 5097 | if (! AliITSInitGeometry::SPDIsTGeoNative()) { |
| 5098 | char spdLaddName[20] = "I1D7"; // "I1D7" |
| 5099 | |
| 5100 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(spdLaddName); |
| 5101 | Int_t index = list->IndexOf(toTransform); |
| 5102 | do { |
| 5103 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5104 | if (toTransform) |
| 5105 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5106 | if (transformed) |
| 5107 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5108 | index++; |
| 5109 | toTransform = (TGeoVolume*)list->At(index); |
| 5110 | } |
| 5111 | while (strcmp(spdLaddName, toTransform->GetName()) == 0); |
| 5112 | } |
| 5113 | |
| 5114 | // SDD 1 |
| 5115 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 5116 | char sddLaddName[20] = "I004";// "I302" |
| 5117 | |
| 5118 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddLaddName); |
| 5119 | Int_t index = list->IndexOf(toTransform); |
| 5120 | do { |
| 5121 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5122 | if (toTransform) |
| 5123 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5124 | if (transformed) |
| 5125 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5126 | index++; |
| 5127 | toTransform = (TGeoVolume*)list->At(index); |
| 5128 | } |
| 5129 | while (strcmp(sddLaddName, toTransform->GetName()) == 0); |
| 5130 | } |
| 5131 | |
| 5132 | // SDD 2 |
| 5133 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 5134 | char sddLaddName[20] = "I005";// "I402" |
| 5135 | |
| 5136 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddLaddName); |
| 5137 | Int_t index = list->IndexOf(toTransform); |
| 5138 | do { |
| 5139 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5140 | if (toTransform) |
| 5141 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5142 | if (transformed) |
| 5143 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5144 | index++; |
| 5145 | toTransform = (TGeoVolume*)list->At(index); |
| 5146 | } |
| 5147 | while (strcmp(sddLaddName, toTransform->GetName()) == 0); |
| 5148 | } |
| 5149 | |
| 5150 | |
| 5151 | // SSD 1 |
| 5152 | if (! AliITSInitGeometry::SSDIsTGeoNative()) { |
| 5153 | char ssdLaddName[20] = "I565";// "I562" |
| 5154 | |
| 5155 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(ssdLaddName); |
| 5156 | Int_t index = list->IndexOf(toTransform); |
| 5157 | do { |
| 5158 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5159 | if (toTransform) |
| 5160 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5161 | if (transformed) |
| 5162 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5163 | index++; |
| 5164 | toTransform = (TGeoVolume*)list->At(index); |
| 5165 | } |
| 5166 | while (strcmp(ssdLaddName,toTransform->GetName()) == 0); |
| 5167 | } |
| 5168 | |
| 5169 | // SSD 2 |
| 5170 | if (! AliITSInitGeometry::SSDIsTGeoNative()) { |
| 5171 | char ssdLaddName[20] = "I569";// "I566" |
| 5172 | |
| 5173 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(ssdLaddName); |
| 5174 | Int_t index = list->IndexOf(toTransform); |
| 5175 | do { |
| 5176 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5177 | if (toTransform) |
| 5178 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5179 | if (transformed) |
| 5180 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5181 | index++; |
| 5182 | toTransform = (TGeoVolume*)list->At(index); |
| 5183 | } |
| 5184 | while (strcmp(ssdLaddName, toTransform->GetName()) == 0); |
| 5185 | } |
| 5186 | |
| 5187 | |
| 5188 | //====== Converting some virtual volumes to assemblies in order |
| 5189 | //====== to avoid overlaps : |
| 5190 | |
| 5191 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 5192 | char sddName[20] = "I047"; |
| 5193 | |
| 5194 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName); |
| 5195 | Int_t index = list->IndexOf(toTransform); |
| 5196 | do { |
| 5197 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5198 | if (toTransform) |
| 5199 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5200 | if (transformed) |
| 5201 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5202 | index++; |
| 5203 | toTransform = (TGeoVolume*)list->At(index); |
| 5204 | } |
| 5205 | while (strcmp(sddName, toTransform->GetName()) == 0); |
| 5206 | } |
| 5207 | |
| 5208 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 5209 | char sddName[20] = "I048"; |
| 5210 | |
| 5211 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName); |
| 5212 | Int_t index = list->IndexOf(toTransform); |
| 5213 | do { |
| 5214 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5215 | if (toTransform) |
| 5216 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5217 | if (transformed) |
| 5218 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5219 | index++; |
| 5220 | toTransform = (TGeoVolume*)list->At(index); |
| 5221 | } |
| 5222 | while (strcmp(sddName, toTransform->GetName()) == 0); |
| 5223 | } |
| 5224 | |
| 5225 | if (! AliITSInitGeometry::SDDIsTGeoNative()) { |
| 5226 | char sddName[20] = "I018"; |
| 5227 | |
| 5228 | TGeoVolume *toTransform = gGeoManager->FindVolumeFast(sddName); |
| 5229 | Int_t index = list->IndexOf(toTransform); |
| 5230 | do { |
| 5231 | TGeoVolume *transformed = 0; // this will be in fact TGeoVolumeAssembly |
| 5232 | if (toTransform) |
| 5233 | transformed = TGeoVolumeAssembly::MakeAssemblyFromVolume(toTransform); |
| 5234 | if (transformed) |
| 5235 | gGeoManager->ReplaceVolume(toTransform, transformed); |
| 5236 | index++; |
| 5237 | toTransform = (TGeoVolume*)list->At(index); |
| 5238 | } |
| 5239 | while (strcmp(sddName, toTransform->GetName()) == 0); |
| 5240 | } |
| 108bd0fe |
5241 | } |
| 108bd0fe |
5242 | } |
| 5243 | //______________________________________________________________________ |
| 5244 | void AliITSv11Hybrid::CreateMaterials(){ |
| 5245 | // Create ITS materials |
| 5246 | // This function defines the default materials used in the Geant |
| 5247 | // Monte Carlo simulations for the geometries AliITSv1, AliITSv3, |
| 5248 | // AliITSv11Hybrid. |
| 5249 | // In general it is automatically replaced by |
| 5250 | // the CreateMaterials routine defined in AliITSv?. Should the function |
| 5251 | // CreateMaterials not exist for the geometry version you are using this |
| 5252 | // one is used. See the definition found in AliITSv5 or the other routine |
| 5253 | // for a complete definition. |
| 5254 | // Inputs: |
| 5255 | // none. |
| 5256 | // Outputs: |
| 5257 | // none. |
| 5258 | // Return: |
| 5259 | // none. |
| 5260 | |
| f7a1cc68 |
5261 | Int_t ifield = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Integ(); |
| 5262 | Float_t fieldm = ((AliMagF*)TGeoGlobalMagField::Instance()->GetField())->Max(); |
| 108bd0fe |
5263 | |
| 5264 | Float_t tmaxfd = 0.1; // 1.0; // Degree |
| 5265 | Float_t stemax = 1.0; // cm |
| 5266 | Float_t deemax = 0.1; // 30.0; // Fraction of particle's energy 0<deemax<=1 |
| 5267 | Float_t epsil = 1.0E-4; // 1.0; // cm |
| 5268 | Float_t stmin = 0.0; // cm "Default value used" |
| 5269 | |
| 5270 | Float_t tmaxfdSi = 0.1; // .10000E+01; // Degree |
| 5271 | Float_t stemaxSi = 0.0075; // .10000E+01; // cm |
| 5272 | Float_t deemaxSi = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1 |
| 5273 | Float_t epsilSi = 1.0E-4;// .10000E+01; |
| 5274 | Float_t stminSi = 0.0; // cm "Default value used" |
| 5275 | |
| 5276 | Float_t tmaxfdAir = 0.1; // .10000E+01; // Degree |
| 5277 | Float_t stemaxAir = .10000E+01; // cm |
| 5278 | Float_t deemaxAir = 0.1; // 0.30000E-02; // Fraction of particle's energy 0<deemax<=1 |
| 5279 | Float_t epsilAir = 1.0E-4;// .10000E+01; |
| 5280 | Float_t stminAir = 0.0; // cm "Default value used" |
| 5281 | |
| 5282 | Float_t tmaxfdServ = 1.0; // 10.0; // Degree |
| 5283 | Float_t stemaxServ = 1.0; // 0.01; // cm |
| 5284 | Float_t deemaxServ = 0.5; // 0.1; // Fraction of particle's energy 0<deemax<=1 |
| 5285 | Float_t epsilServ = 1.0E-3; // 0.003; // cm |
| 5286 | Float_t stminServ = 0.0; //0.003; // cm "Default value used" |
| 5287 | |
| 5288 | // Freon PerFluorobuthane C4F10 see |
| 5289 | // http://st-support-cooling-electronics.web.cern.ch/ |
| 5290 | // st-support-cooling-electronics/default.htm |
| 5291 | Float_t afre[2] = { 12.011,18.9984032 }; |
| 5292 | Float_t zfre[2] = { 6., 9. }; |
| 5293 | Float_t wfre[2] = { 4.,10. }; |
| 5294 | Float_t densfre = 1.52; |
| 5295 | |
| 5296 | |
| 5297 | //CM55J |
| 5298 | |
| 5299 | Float_t aCM55J[4]={12.0107,14.0067,15.9994,1.00794}; |
| 5300 | Float_t zCM55J[4]={6.,7.,8.,1.}; |
| 5301 | Float_t wCM55J[4]={0.908508078,0.010387573,0.055957585,0.025146765}; |
| 573a206f |
5302 | Float_t dCM55J = 1.8; |
| 108bd0fe |
5303 | |
| 5304 | //ALCM55J |
| 5305 | |
| 5306 | Float_t aALCM55J[5]={12.0107,14.0067,15.9994,1.00794,26.981538}; |
| 5307 | Float_t zALCM55J[5]={6.,7.,8.,1.,13.}; |
| 5308 | Float_t wALCM55J[5]={0.817657902,0.0093488157,0.0503618265,0.0226320885,0.1}; |
| 5309 | Float_t dALCM55J = 1.9866; |
| 5310 | |
| 5311 | //Si Chips |
| 5312 | |
| 5313 | Float_t aSICHIP[6]={12.0107,14.0067,15.9994,1.00794,28.0855,107.8682}; |
| 5314 | Float_t zSICHIP[6]={6.,7.,8.,1.,14., 47.}; |
| 5315 | Float_t wSICHIP[6]={0.039730642,0.001396798,0.01169634,0.004367771,0.844665,0.09814344903}; |
| 5316 | Float_t dSICHIP = 2.36436; |
| 5317 | |
| 5318 | //Inox |
| 5319 | |
| 267d2209 |
5320 | Float_t aINOX[9]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,95.94,55.845}; |
| 108bd0fe |
5321 | Float_t zINOX[9]={6.,25.,14.,15.,16., 28.,24.,42.,26.}; |
| 5322 | Float_t wINOX[9]={0.0003,0.02,0.01,0.00045,0.0003,0.12,0.17,0.025,0.654}; |
| 5323 | Float_t dINOX = 8.03; |
| 5324 | |
| 9c8369f9 |
5325 | //AISI 304 L (from F.Tosello's web page - M.S. 18 Oct 10) |
| 5326 | |
| 5327 | Float_t a304L[8]={12.0107,54.9380, 28.0855,30.9738,32.066,58.6928,51.9961,55.845}; |
| 5328 | Float_t z304L[8]={6.,25.,14.,15.,16., 28.,24.,26.}; |
| 5329 | Float_t w304L[8]={0.0003,0.02,0.01,0.00045,0.003,0.0925,0.19,0.6865}; |
| 5330 | Float_t d304L = 8.03; |
| 5331 | |
| 108bd0fe |
5332 | //SDD HV microcable |
| 5333 | |
| 5334 | Float_t aHVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538}; |
| 5335 | Float_t zHVm[5]={6.,1.,7.,8.,13.}; |
| 5336 | Float_t wHVm[5]={0.520088819984,0.01983871336,0.0551367996,0.157399667056, 0.247536}; |
| 5337 | Float_t dHVm = 1.6087; |
| 5338 | |
| 5339 | //SDD LV+signal cable |
| 5340 | |
| 5341 | Float_t aLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538}; |
| 5342 | Float_t zLVm[5]={6.,1.,7.,8.,13.}; |
| 5343 | Float_t wLVm[5]={0.21722436468,0.0082859922,0.023028867,0.06574077612, 0.68572}; |
| 5344 | Float_t dLVm = 2.1035; |
| 5345 | |
| 5346 | //SDD hybrid microcab |
| 5347 | |
| 5348 | Float_t aHLVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538}; |
| 5349 | Float_t zHLVm[5]={6.,1.,7.,8.,13.}; |
| 5350 | Float_t wHLVm[5]={0.24281879711,0.00926228815,0.02574224025,0.07348667449, 0.64869}; |
| 5351 | Float_t dHLVm = 2.0502; |
| 5352 | |
| 5353 | //SDD anode microcab |
| 5354 | |
| 5355 | Float_t aALVm[5]={12.0107,1.00794,14.0067,15.9994,26.981538}; |
| 5356 | Float_t zALVm[5]={6.,1.,7.,8.,13.}; |
| 5357 | Float_t wALVm[5]={0.392653705471,0.0128595919215,0.041626868025,0.118832707289, 0.431909}; |
| 5358 | Float_t dALVm = 2.0502; |
| 5359 | |
| 9c8369f9 |
5360 | //X7R capacitors - updated from F.Tosello's web page - M.S. 18 Oct 10 |
| 5361 | |
| 5362 | Float_t aX7R[6]={137.327,47.867,15.9994,58.6928,63.5460,118.710}; |
| 5363 | Float_t zX7R[6]={56.,22.,8.,28.,29.,50.}; |
| 5364 | Float_t wX7R[6]={0.524732,0.176736,0.179282,0.079750,0.019750,0.019750}; |
| 5365 | Float_t dX7R = 6.07914; |
| 108bd0fe |
5366 | |
| 9c8369f9 |
5367 | //X7R weld, i.e. Sn 60% Pb 40% (from F.Tosello's web page - M.S. 15 Oct 10) |
| 5368 | |
| 5369 | Float_t aX7Rweld[2]={118.71 , 207.20}; |
| 5370 | Float_t zX7Rweld[2]={ 50. , 82. }; |
| 5371 | Float_t wX7Rweld[2]={ 0.60 , 0.40}; |
| 5372 | Float_t dX7Rweld = 8.52358; |
| 108bd0fe |
5373 | |
| 5374 | // AIR |
| 5375 | |
| 5376 | Float_t aAir[4]={12.0107,14.0067,15.9994,39.948}; |
| 5377 | Float_t zAir[4]={6.,7.,8.,18.}; |
| 5378 | Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827}; |
| 5379 | Float_t dAir = 1.20479E-3; |
| 5380 | |
| 5381 | // Water |
| 5382 | |
| 5383 | Float_t aWater[2]={1.00794,15.9994}; |
| 5384 | Float_t zWater[2]={1.,8.}; |
| 5385 | Float_t wWater[2]={0.111894,0.888106}; |
| 5386 | Float_t dWater = 1.0; |
| 5387 | |
| 5388 | // CERAMICS |
| 5389 | // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3 |
| 5390 | Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 }; |
| 5391 | Float_t zcer[5] = { 13., 8., 14., 25., 24. }; |
| 5392 | Float_t wcer[5] = {.4443408,.5213375,.0130872,.0178135,.003421}; |
| 5393 | Float_t denscer = 3.6; |
| 5394 | |
| 5395 | //G10FR4 |
| 5396 | |
| 5397 | Float_t zG10FR4[14] = {14.00, 20.00, 13.00, 12.00, 5.00, 22.00, 11.00, 19.00, 26.00, 9.00, 8.00, 6.00, 7.00, 1.00}; |
| 5398 | Float_t aG10FR4[14] = {28.0855000,40.0780000,26.9815380,24.3050000,10.8110000,47.8670000,22.9897700,39.0983000,55.8450000,18.9984000,15.9994000,12.0107000,14.0067000,1.0079400}; |
| 5399 | Float_t wG10FR4[14] = {0.15144894,0.08147477,0.04128158,0.00904554,0.01397570,0.00287685,0.00445114,0.00498089,0.00209828,0.00420000,0.36043788,0.27529426,0.01415852,0.03427566}; |
| 5400 | Float_t densG10FR4= 1.8; |
| 5401 | |
| 5402 | //--- EPOXY --- C18 H19 O3 |
| 5403 | Float_t aEpoxy[3] = {15.9994, 1.00794, 12.0107} ; |
| 5404 | Float_t zEpoxy[3] = { 8., 1., 6.} ; |
| 5405 | Float_t wEpoxy[3] = { 3., 19., 18.} ; |
| 5406 | Float_t dEpoxy = 1.8 ; |
| 5407 | |
| 5408 | // rohacell: C9 H13 N1 O2 |
| 5409 | Float_t arohac[4] = {12.01, 1.01, 14.010, 16.}; |
| 5410 | Float_t zrohac[4] = { 6., 1., 7., 8.}; |
| 074b8e6f |
5411 | Float_t wrohac[4] = { 14., 10., 2., 6.}; |
| 5412 | Float_t drohac = 0.052; |
| 108bd0fe |
5413 | |
| 5414 | // If he/she means stainless steel (inox) + Aluminium and Zeff=15.3383 then |
| 5415 | // |
| 5416 | // %Al=81.6164 %inox=100-%Al |
| 5417 | |
| 5418 | Float_t aInAl[5] = {27., 55.847,51.9961,58.6934,28.0855 }; |
| 5419 | Float_t zInAl[5] = {13., 26.,24.,28.,14. }; |
| 5420 | Float_t wInAl[5] = {.816164, .131443,.0330906,.0183836,.000919182}; |
| 5421 | Float_t dInAl = 3.075; |
| 5422 | |
| d8826f33 |
5423 | // Aluminum alloy with 12% Copper - 21 Oct 10 |
| 5424 | |
| 5425 | Float_t aAlCu12[2] = {26.9815, 63.546}; |
| 5426 | Float_t zAlCu12[2] = {13. , 29. }; |
| 5427 | Float_t wAlCu12[2] = { 0.88 , 0.12 }; |
| 5428 | Float_t dAlCu12 = 2.96; |
| 5429 | |
| 108bd0fe |
5430 | // Kapton |
| 5431 | |
| 5432 | Float_t aKapton[4]={1.00794,12.0107, 14.010,15.9994}; |
| 5433 | Float_t zKapton[4]={1.,6.,7.,8.}; |
| 5434 | Float_t wKapton[4]={0.026362,0.69113,0.07327,0.209235}; |
| 5435 | Float_t dKapton = 1.42; |
| 45c52bb2 |
5436 | |
| 5437 | // Kapton + Cu (for Pixel Bus) |
| 5438 | |
| 5439 | Float_t aKaptonCu[5]={1.00794, 12.0107, 14.010, 15.9994, 63.5460}; |
| 5440 | Float_t zKaptonCu[5]={1., 6., 7., 8., 29.}; |
| 5441 | Float_t wKaptonCuBus[5]; |
| 5442 | |
| 5443 | // Kapton + Cu (for Pixel MCM) |
| 5444 | |
| 5445 | Float_t wKaptonCuMCM[5]; |
| 5446 | |
| 5447 | // Kapton + Cu (mix of two above) |
| 5448 | |
| 5449 | Float_t wKaptonCuMix[5]; |
| 108bd0fe |
5450 | |
| 5451 | //SDD ruby sph. |
| 5452 | Float_t aAlOxide[2] = { 26.981539,15.9994}; |
| 5453 | Float_t zAlOxide[2] = { 13., 8.}; |
| 5454 | Float_t wAlOxide[2] = {0.4707, 0.5293}; |
| 5455 | Float_t dAlOxide = 3.97; |
| 5456 | |
| cc8a4c78 |
5457 | // Silica for optical fibers: Si O2 |
| 5458 | Float_t aoptfib[2] = { 28.0855, 15.9994}; |
| 5459 | Float_t zoptfib[2] = { 14., 8. }; |
| 5460 | Float_t woptfib[2] = { 1., 2. }; |
| 5461 | Float_t doptfib = 2.55; |
| 5462 | |
| 798b4e0c |
5463 | // Tetrafluorethylene-Perfluorpropylene (FEP) - 08 Mar 10 |
| 5464 | Float_t aFEP[2] = { 12.0107, 18.9984}; |
| 5465 | Float_t zFEP[2] = { 6. , 9. }; |
| 5466 | Float_t wFEP[2] = { 1. , 2. }; |
| 5467 | Float_t dFEP = 2.15; |
| 5468 | |
| 44d18d38 |
5469 | // PVC (C2H3Cl)n - 08 Jul 10 |
| 5470 | Float_t aPVC[3] = { 12.0107, 1.00794, 35.4527}; |
| 5471 | Float_t zPVC[3] = { 6. , 1. , 35. }; |
| 5472 | Float_t wPVC[3] = { 2. , 3. , 1. }; |
| 5473 | Float_t dPVC = 1.3; |
| 5474 | |
| 57126ea1 |
5475 | // PBT (Polybutylene terephthalate = C12-H12-O4) - 01 Sep 10 |
| 5476 | Float_t aPBT[3] = { 12.0107, 1.00794, 15.9994}; |
| 5477 | Float_t zPBT[3] = { 6. , 1. , 8. }; |
| 5478 | Float_t wPBT[3] = { 12. ,12. , 4. }; |
| 5479 | Float_t dPBT = 1.31; |
| 5480 | |
| 5481 | // POLYAX (POLYAX = C37-H24-O6-N2) - 03 Sep 10 |
| 5482 | Float_t aPOLYAX[4] = { 12.0107, 1.00794, 15.9994, 14.00674}; |
| 5483 | Float_t zPOLYAX[4] = { 6. , 1. , 8. , 7. }; |
| 5484 | Float_t wPOLYAX[4] = { 37. ,24. , 6. , 2. }; |
| 5485 | Float_t dPOLYAX = 1.27; |
| 5486 | |
| 5487 | // PPS (PPS = C6-H4-S) - 05 Sep 10 |
| 5488 | Float_t aPPS[3] = { 12.0107, 1.00794, 32.066}; |
| 5489 | Float_t zPPS[3] = { 6. , 1. , 16. }; |
| 5490 | Float_t wPPS[3] = { 6. , 4. , 1. }; |
| 5491 | Float_t dPPS = 1.35; |
| 5492 | |
| d8826f33 |
5493 | // Megolon (Polyolefin = (C-H2)n) - 20 Oct 10 |
| 5494 | Float_t aMegolon[2] = { 12.0107, 1.00794}; |
| 5495 | Float_t zMegolon[2] = { 6. , 1. }; |
| 5496 | Float_t wMegolon[2] = { 1. , 2. }; |
| 5497 | Float_t dMegolon = 1.51; // Mean of various types |
| 5498 | |
| 5499 | // Standard glass (from glassproperties.com/glasses - M.S. 21 Oct 10) |
| 5500 | Float_t aStdGlass[7] = {15.9994 ,28.0855 ,22.98977 ,40.078 , |
| 5501 | 24.305 ,26.981539,39.0983 }; |
| 5502 | Float_t zStdGlass[7] = { 8. ,14. ,11. ,20. , |
| 5503 | 12. ,13. ,19. }; |
| 5504 | Float_t wStdGlass[7] = { 0.468377, 0.348239, 0.096441, 0.071469, |
| 5505 | 0.006030, 0.005293, 0.004151}; |
| 5506 | Float_t dStdGlass = 2.53; |
| 5507 | |
| 9c8369f9 |
5508 | // Glass Fiber (from F.Tosello's web page - M.S. 15 Oct 10) |
| 5509 | Float_t aGlass[11] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 , |
| 5510 | 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 ,55.845}; |
| 5511 | Float_t zGlass[11] = { 8. ,14. ,20 ,13 , 5 , |
| 5512 | 12. ,19 ,11 , 9 ,22 ,26 }; |
| 5513 | Float_t wGlass[11] = { 0.473610, 0.252415, 0.135791, 0.068803, 0.023293, |
| 5514 | 0.015076, 0.008301, 0.007419, 0.007000, 0.004795, 0.003497}; |
| 5515 | Float_t dGlass = 2.61; |
| 5516 | |
| 5517 | // Ryton R-4 04 (from F.Tosello's web page - M.S. 15 Oct 10) |
| 5518 | Float_t aRyton[14] = {15.9994 ,28.0855 ,40.078 ,26.981539,10.811 , |
| 5519 | 24.305 ,39.0983 ,22.98977 ,18.9984 ,47.867 , |
| 5520 | 55.845 ,12.0107 , 1.00794 ,32.066 }; |
| 5521 | Float_t zRyton[14] = { 8. ,14. ,20. ,13. , 5. , |
| 5522 | 12. ,19. ,11. , 9. ,22. , |
| 5523 | 26. , 6. , 1. ,16. }; |
| 5524 | Float_t wRyton[14] = { 0.189445, 0.100966, 0.054316, 0.027521, 0.009317, |
| 5525 | 0.006030, 0.003320, 0.002968, 0.002800, 0.001918, |
| 5526 | 0.001399, 0.399760, 0.022365, 0.177875}; |
| 5527 | Float_t dRyton = 1.65; |
| 5528 | |
| f0a991bf |
5529 | // Plexiglas (Poly(methyl methacrylate) (C5O2H8)n - M.S. 05 nov 10) |
| 5530 | Float_t aPlexy[3] = { 12.0107, 15.9994, 1.00794}; |
| 5531 | Float_t zPlexy[3] = { 6. , 8. , 1. }; |
| 5532 | Float_t wPlexy[3] = { 5. , 2. , 8. }; |
| 5533 | Float_t dPlexy = 1.18; |
| 5534 | |
| 78e34526 |
5535 | //SSD NiSn capacitor ends |
| 5536 | Float_t aNiSn[2] = { 56.6934,118.710}; |
| 5537 | Float_t zNiSn[2] = { 28., 50.}; |
| 5538 | Float_t wNiSn[2] = {0.33, 0.67}; |
| 5539 | Float_t dNiSn = wNiSn[0]*8.908 + wNiSn[1]*7.310; |
| 5540 | |
| 108bd0fe |
5541 | AliMaterial(1,"SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5542 | AliMedium(1,"SI$",1,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi); |
| 5543 | |
| 5544 | AliMaterial(2,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5545 | AliMedium(2,"SPD SI CHIP$",2,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi); |
| 5546 | |
| 5547 | AliMaterial(3,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5548 | AliMedium(3,"SPD SI BUS$",3,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi); |
| 5549 | |
| 5550 | AliMixture(4,"C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J); |
| 5551 | AliMedium(4,"C (M55J)$",4,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5552 | |
| 5553 | AliMixture(5,"AIR$",aAir,zAir,dAir,4,wAir); |
| 5554 | AliMedium(5,"AIR$",5,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir); |
| 5555 | |
| 5556 | AliMixture(6,"GEN AIR$",aAir,zAir,dAir,4,wAir); |
| 5557 | AliMedium(6,"GEN AIR$",6,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir); |
| 5558 | |
| 5559 | AliMixture(7,"SDD SI CHIP$",aSICHIP,zSICHIP,dSICHIP,6,wSICHIP); |
| 5560 | AliMedium(7,"SDD SI CHIP$",7,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi); |
| 5561 | |
| 5562 | AliMixture(9,"SDD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J); |
| 5563 | AliMedium(9,"SDD C (M55J)$",9,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5564 | |
| 5565 | AliMixture(10,"SDD AIR$",aAir,zAir,dAir,4,wAir); |
| 5566 | AliMedium(10,"SDD AIR$",10,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir); |
| 5567 | |
| 5568 | AliMaterial(11,"AL$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03); |
| 5569 | AliMedium(11,"AL$",11,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5570 | |
| 5571 | AliMixture(12, "Water$",aWater,zWater,dWater,2,wWater); |
| 5572 | AliMedium(12,"WATER$",12,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5573 | |
| 5574 | AliMixture(13,"Freon$",afre,zfre,densfre,-2,wfre); |
| 5575 | AliMedium(13,"Freon$",13,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5576 | |
| 5577 | AliMaterial(14,"COPPER$",0.63546E+02,0.29000E+02,0.89600E+01,0.14300E+01,0.99900E+03); |
| 5578 | AliMedium(14,"COPPER$",14,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5579 | AliMixture(15,"CERAMICS$",acer,zcer,denscer,5,wcer); |
| 5580 | AliMedium(15,"CERAMICS$",15,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5581 | |
| 5582 | AliMixture(20,"SSD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J); |
| 5583 | AliMedium(20,"SSD C (M55J)$",20,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5584 | |
| 5585 | AliMixture(21,"SSD AIR$",aAir,zAir,dAir,4,wAir); |
| 5586 | AliMedium(21,"SSD AIR$",21,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir); |
| 5587 | |
| 5588 | AliMixture(25,"G10FR4$",aG10FR4,zG10FR4,densG10FR4,14,wG10FR4); |
| 5589 | AliMedium(25,"G10FR4$",25,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5590 | |
| 5591 | AliMixture(26,"GEN C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J); |
| 5592 | AliMedium(26,"GEN C (M55J)$",26,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5593 | |
| 5594 | AliMixture(27,"GEN Air$",aAir,zAir,dAir,4,wAir); |
| 5595 | AliMedium(27,"GEN Air$",27,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir); |
| 5596 | |
| f0a991bf |
5597 | AliMixture(35,"PLEXYGLAS$",aPlexy,zPlexy,dPlexy,-3,wPlexy); |
| 5598 | AliMedium(35,"PLEXYGLAS$",35,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5599 | |
| d8826f33 |
5600 | AliMixture(36,"STDGLASS$",aStdGlass,zStdGlass,dStdGlass,7,wStdGlass); |
| 5601 | AliMedium(36,"STDGLASS$",36,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5602 | |
| 5603 | AliMixture(37,"ALCU12$",aAlCu12,zAlCu12,dAlCu12,2,wAlCu12); |
| 5604 | AliMedium(37,"ALCU12$",37,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5605 | |
| 5606 | AliMixture(38,"MEGOLON$",aMegolon,zMegolon,dMegolon,-2,wMegolon); |
| 5607 | AliMedium(38,"MEGOLON$",38,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5608 | |
| 9c8369f9 |
5609 | AliMixture(39,"RYTON$",aRyton,zRyton,dRyton,14,wRyton); |
| 5610 | AliMedium(39,"RYTON$",39,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5611 | |
| 5612 | AliMixture(40,"GLASS FIBER$",aGlass,zGlass,dGlass,11,wGlass); |
| 5613 | AliMedium(40,"GLASS FIBER$",40,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5614 | |
| 5615 | AliMixture(41,"AISI304L$",a304L,z304L,d304L,8,w304L); |
| 5616 | AliMedium(41,"AISI304L$",41,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5617 | |
| 5618 | AliMaterial(42,"NICKEL$",0.58693E+02,0.28000E+02,0.89080E+01,0.14200E+01,0.99900E+03); |
| 5619 | AliMedium(42,"NICKEL$",42,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5620 | |
| 5621 | AliMixture(43,"SDD X7R weld$",aX7Rweld,zX7Rweld,dX7Rweld,2,wX7Rweld); |
| 5622 | AliMedium(43,"SDD X7R weld$",43,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5623 | |
| 57126ea1 |
5624 | AliMixture(44,"PPS$",aPPS,zPPS,dPPS,-3,wPPS); |
| 5625 | AliMedium(44,"PPS$",44,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5626 | |
| 5627 | AliMixture(45,"POLYAX$",aPOLYAX,zPOLYAX,dPOLYAX,-4,wPOLYAX); |
| 5628 | AliMedium(45,"POLYAX$",45,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5629 | |
| 5630 | AliMixture(46,"PBT$",aPBT,zPBT,dPBT,-3,wPBT); |
| 5631 | AliMedium(46,"PBT$",46,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5632 | |
| 44d18d38 |
5633 | AliMixture(47,"PVC$",aPVC,zPVC,dPVC,-3,wPVC); |
| 5634 | AliMedium(47,"PVC$",47,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5635 | |
| 45c52bb2 |
5636 | Double_t cuFrac = 0.56; |
| 5637 | Double_t kFrac = 1.0 - cuFrac; |
| 5638 | Double_t cuDens = 8.96; |
| 5639 | Float_t dKaptonCuBus = cuFrac * cuDens + kFrac * dKapton; |
| 5640 | for (Int_t j=0; j<4; j++) |
| 5641 | wKaptonCuBus[j] = wKapton[j]*kFrac; |
| 5642 | wKaptonCuBus[4] = cuFrac; |
| 5643 | AliMixture(48, "SPD-BUS CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuBus, 5, wKaptonCuBus); |
| 5644 | AliMedium(48,"SPD-BUS CU KAPTON$",48,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5645 | |
| 5646 | cuFrac = 0.5; |
| 5647 | kFrac = 1.0 - cuFrac; |
| 5648 | Float_t dKaptonCuMCM = cuFrac * cuDens + kFrac * dKapton; |
| 5649 | for (Int_t j=0; j<4; j++) |
| 5650 | wKaptonCuMCM[j] = wKapton[j]*kFrac; |
| 5651 | wKaptonCuMCM[4] = cuFrac; |
| 5652 | AliMixture(49, "SPD-MCM CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMCM, 5, wKaptonCuMCM); |
| 5653 | AliMedium(49,"SPD-MCM CU KAPTON$",49,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5654 | |
| 5655 | cuFrac = (0.56 + 0.5) / 2.0; |
| 5656 | kFrac = 1.0 - cuFrac; |
| 5657 | Float_t dKaptonCuMix = cuFrac * cuDens + kFrac * dKapton; |
| 5658 | for (Int_t j=0; j<4; j++) |
| 5659 | wKaptonCuMix[j] = wKapton[j]*kFrac; |
| 5660 | wKaptonCuMix[4] = cuFrac; |
| 5661 | AliMixture(50, "SPD-MIX CU KAPTON", aKaptonCu, zKaptonCu, dKaptonCuMix, 5, wKaptonCuMix); |
| 5662 | AliMedium(50,"SPD-MIX CU KAPTON$",50,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5663 | |
| 108bd0fe |
5664 | AliMaterial(51,"SPD SI$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5665 | AliMedium(51,"SPD SI$",51,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi); |
| 5666 | |
| 5667 | AliMaterial(52,"SPD SI CHIP$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5668 | AliMedium(52,"SPD SI CHIP$",52,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi); |
| 5669 | |
| 5670 | AliMaterial(53,"SPD SI BUS$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5671 | AliMedium(53,"SPD SI BUS$",53,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi); |
| 5672 | |
| 5673 | AliMixture(54,"SPD C (M55J)$",aCM55J,zCM55J,dCM55J,4,wCM55J); |
| 5674 | AliMedium(54,"SPD C (M55J)$",54,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5675 | |
| 5676 | AliMixture(55,"SPD AIR$",aAir,zAir,dAir,4,wAir); |
| 5677 | AliMedium(55,"SPD AIR$",55,0,ifield,fieldm,tmaxfdAir,stemaxAir,deemaxAir,epsilAir,stminAir); |
| 5678 | |
| 5679 | AliMixture(56, "SPD KAPTON(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton); |
| 5680 | AliMedium(56,"SPD KAPTON(POLYCH2)$",56,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5681 | |
| 96eb8210 |
5682 | // Gaseous Freon has same chemical composition but air density at 1.7 atm |
| 5683 | AliMixture(59,"GASEOUS FREON$",afre,zfre,1.7*dAir,-2,wfre); |
| 5684 | AliMedium(59,"GASEOUS FREON$",59,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5685 | |
| 108bd0fe |
5686 | AliMixture(61,"EPOXY$",aEpoxy,zEpoxy,dEpoxy,-3,wEpoxy); |
| 5687 | AliMedium(61,"EPOXY$",61,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5688 | |
| 5689 | AliMaterial(62,"SILICON$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5690 | AliMedium(62,"SILICON$",62,0,ifield,fieldm,tmaxfdSi,stemaxSi,deemaxSi,epsilSi,stminSi); |
| 5691 | |
| 5692 | AliMixture(63, "KAPTONH(POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton); |
| 5693 | AliMedium(63,"KAPTONH(POLYCH2)$",63,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5694 | |
| 5695 | AliMaterial(64,"ALUMINUM$",0.26982E+02,0.13000E+02,0.26989E+01,0.89000E+01,0.99900E+03); |
| 5696 | AliMedium(64,"ALUMINUM$",64,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5697 | |
| 5698 | AliMixture(65,"INOX$",aINOX,zINOX,dINOX,9,wINOX); |
| 5699 | AliMedium(65,"INOX$",65,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5700 | |
| 78e34526 |
5701 | AliMixture(66,"NiSn$",aNiSn,zNiSn,dNiSn,2,wNiSn); |
| 5702 | AliMedium(66,"NiSn$",66,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5703 | |
| 5704 | AliMaterial(67,"Sn$", 118.710, 50., 7.310, 1.206, 999.); |
| 5705 | AliMedium(67,"Sn$",67,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5706 | |
| 108bd0fe |
5707 | AliMixture(68,"ROHACELL$",arohac,zrohac,drohac,-4,wrohac); |
| 5708 | AliMedium(68,"ROHACELL$",68,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5709 | |
| 5710 | AliMixture(69,"SDD C AL (M55J)$",aALCM55J,zALCM55J,dALCM55J,5,wALCM55J); |
| 5711 | AliMedium(69,"SDD C AL (M55J)$",69,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5712 | |
| 5713 | AliMixture(70, "SDDKAPTON (POLYCH2)", aKapton, zKapton, dKapton, 4, wKapton); |
| 5714 | AliMedium(70,"SDDKAPTON (POLYCH2)$",70,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5715 | |
| 5716 | AliMaterial(71,"ITS SANDW A$",0.12011E+02,0.60000E+01,0.2115E+00,0.17479E+03,0.99900E+03); |
| 5717 | AliMedium(71,"ITS SANDW A$",71,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5718 | |
| 5719 | AliMaterial(72,"ITS SANDW B$",0.12011E+02,0.60000E+01,0.27000E+00,0.18956E+03,0.99900E+03); |
| 5720 | AliMedium(72,"ITS SANDW B$",72,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5721 | |
| 5722 | AliMaterial(73,"ITS SANDW C$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03); |
| 5723 | AliMedium(73,"ITS SANDW C$",73,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5724 | |
| 5725 | AliMaterial(74,"HEAT COND GLUE$",0.12011E+02,0.60000E+01,0.1930E+01,0.22100E+02,0.99900E+03); |
| 5726 | AliMedium(74,"HEAT COND GLUE$",74,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5727 | |
| 5728 | AliMaterial(75,"ELASTO SIL$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5729 | AliMedium(75,"ELASTO SIL$",75,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5730 | |
| 5731 | // SPD bus (data from Petra Riedler) |
| 5732 | Float_t aSPDbus[5] = {1.00794,12.0107,14.01,15.9994,26.982 }; |
| 5733 | Float_t zSPDbus[5] = {1.,6.,7.,8.,13.}; |
| 5734 | Float_t wSPDbus[5] = {0.023523,0.318053,0.009776,0.078057,0.570591}; |
| 5735 | Float_t dSPDbus = 2.128505; |
| 5736 | |
| 5737 | // AliMaterial(76,"SPDBUS(AL+KPT+EPOX)$",0.19509E+02,0.96502E+01,0.19060E+01,0.15413E+02,0.99900E+03); |
| 5738 | AliMixture(76,"SPDBUS(AL+KPT+EPOX)$",aSPDbus,zSPDbus,dSPDbus,5,wSPDbus); |
| 5739 | AliMedium(76,"SPDBUS(AL+KPT+EPOX)$",76,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5740 | |
| 9c8369f9 |
5741 | AliMixture(77,"SDD X7R capacitors$",aX7R,zX7R,dX7R,6,wX7R); |
| 108bd0fe |
5742 | AliMedium(77,"SDD X7R capacitors$",77,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5743 | |
| 5744 | AliMixture(78,"SDD ruby sph. Al2O3$",aAlOxide,zAlOxide,dAlOxide,2,wAlOxide); |
| 5745 | AliMedium(78,"SDD ruby sph. Al2O3$",78,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5746 | |
| 5747 | AliMaterial(79,"SDD SI insensitive$",0.28086E+02,0.14000E+02,0.23300E+01,0.93600E+01,0.99900E+03); |
| 5748 | AliMedium(79,"SDD SI insensitive$",79,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5749 | |
| 5750 | AliMixture(80,"SDD HV microcable$",aHVm,zHVm,dHVm,5,wHVm); |
| 5751 | AliMedium(80,"SDD HV microcable$",80,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5752 | |
| 5753 | AliMixture(81,"SDD LV+signal cable$",aLVm,zLVm,dLVm,5,wLVm); |
| 5754 | AliMedium(81,"SDD LV+signal cable$",81,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5755 | |
| 5756 | AliMixture(82,"SDD hybrid microcab$",aHLVm, zHLVm,dHLVm,5,wHLVm); |
| 5757 | AliMedium(82,"SDD hybrid microcab$",82,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5758 | |
| 5759 | AliMixture(83,"SDD anode microcab$",aALVm,zALVm,dALVm,5,wALVm); |
| 5760 | AliMedium(83,"SDD anode microcab$",83,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5761 | Float_t aDSring[4]={12.0107, 1.00794, 14.0067, 15.9994}; |
| 5762 | Float_t zDSring[4]={ 6., 1., 7., 8.}; |
| 5763 | Float_t wDSring[4]={ 0.854323888, 0.026408778, 0.023050265, 0.096217069}; |
| 5764 | Float_t dDSring = 0.2875; |
| 5765 | AliMixture(84,"SDD/SSD rings$",aDSring,zDSring,dDSring,4,wDSring); |
| 5766 | AliMedium(84,"SDD/SSD rings$",84,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5767 | |
| 5768 | AliMixture(85,"inox/alum$",aInAl,zInAl,dInAl,5,wInAl); |
| 5769 | AliMedium(85,"inox/alum$",85,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5770 | |
| 5771 | // special media to take into account services in the SDD and SSD |
| 5772 | // cones for the FMD |
| 5773 | //Begin_Html |
| 5774 | /* |
| 5775 | <A HREF="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_MatBudget_4B.xls"> |
| 5776 | </pre> |
| 5777 | <br clear=left> |
| 5778 | <font size=+2 color=blue> |
| 5779 | <p> The Exel spread sheet from which these density number come from. |
| 5780 | </font></A> |
| 5781 | */ |
| 5782 | //End_Html |
| 5783 | |
| 5784 | // AliMaterial(86,"AIRFMDSDD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03); |
| 5785 | Float_t aA[13],zZ[13],wW[13],den; |
| 5786 | // From Pierluigi Barberis calculations of 2SPD+1SDD October 2 2002. |
| 5787 | zZ[0] = 1.0; aA[0] = 1.00794; // Hydrogen |
| 5788 | zZ[1] = 6.0; aA[1] = 12.011; // Carbon |
| 5789 | zZ[2] = 7.0; aA[2] = 14.00674; // Nitrogen |
| 5790 | zZ[3] = 8.0; aA[3] = 15.9994; // Oxigen |
| 5791 | zZ[4] = 14.0; aA[4] = 28.0855; // Silicon |
| 5792 | zZ[5] = 24.0; aA[5] = 51.9961; //Cromium |
| 5793 | zZ[6] = 25.0; aA[6] = 54.938049; // Manganese |
| 5794 | zZ[7] = 26.0; aA[7] = 55.845; // Iron |
| 5795 | zZ[8] = 28.0; aA[8] = 58.6934; // Nickle |
| 5796 | zZ[9] = 29.0; aA[9] = 63.546; // Copper |
| 5797 | zZ[10] = 13.0; aA[10] = 26.981539; // Alulminum |
| 5798 | zZ[11] = 47.0; aA[11] = 107.8682; // Silver |
| 5799 | zZ[12] = 27.0; aA[12] = 58.9332; // Cobolt |
| 5800 | wW[0] = 0.019965; |
| 5801 | wW[1] = 0.340961; |
| 5802 | wW[2] = 0.041225; |
| 5803 | wW[3] = 0.200352; |
| 5804 | wW[4] = 0.000386; |
| 5805 | wW[5] = 0.001467; |
| 5806 | wW[6] = 0.000155; |
| 5807 | wW[7] = 0.005113; |
| 5808 | wW[8] = 0.000993; |
| 5809 | wW[9] = 0.381262; |
| 5810 | wW[10] = 0.008121; |
| 5811 | wW[11] = 0.000000; |
| 5812 | wW[12] = 0.000000; |
| 5813 | if(fByThick){// New values seeITS_MatBudget_4B.xls |
| 5814 | den = 1.5253276; // g/cm^3 Cell O370 |
| 5815 | }else{ |
| 5816 | den = 2.58423412; // g/cm^3 Cell L370 |
| 5817 | } // end if fByThick |
| 5818 | //den = 6161.7/(3671.58978);//g/cm^3 Volume does not exclude holes |
| 5819 | AliMixture(86,"AIRFMDSDD$",aA,zZ,den,+11,wW); |
| 5820 | AliMedium(86,"AIRFMDSDD$",86,0,ifield,fieldm,tmaxfdAir,stemaxAir, |
| 5821 | deemaxAir,epsilAir,stminAir); |
| 5822 | |
| 5823 | //AliMaterial(87,"AIRFMDSSD$",0.14610E+02,0.73000E+01,0.12050E-02,0.30423E+05,0.99900E+03); |
| 5824 | // From Pierluigi Barberis calculations of SSD October 2 2002. |
| 5825 | wW[0] = 0.019777; |
| 5826 | wW[1] = 0.325901; |
| 5827 | wW[2] = 0.031848; |
| 5828 | wW[3] = 0.147668; |
| 5829 | wW[4] = 0.030609; |
| 5830 | wW[5] = 0.013993; |
| 5831 | wW[6] = 0.001479; |
| 5832 | wW[7] = 0.048792; |
| 5833 | wW[8] = 0.009477; |
| 5834 | wW[9] = 0.350697; |
| 5835 | wW[10] = 0.014546; |
| 5836 | wW[11] = 0.005213; |
| 5837 | wW[12] = 0.000000; |
| 5838 | if(fByThick){// New values seeITS_MatBudget_4B.xls |
| 5839 | den = 1.2464275; // g/cm^3 Cell O403 |
| 5840 | }else{ |
| 5841 | den = 1.28134409; // g/cm^3 Cell L403 |
| 5842 | } // end if fByThick |
| 5843 | //den = 7666.3/(9753.553259); // volume does not exclude holes |
| 5844 | AliMixture(87,"AIRFMDSSD$",aA,zZ,den,+12,wW); |
| 5845 | AliMedium(87,"AIRFMDSSD$",87,0,ifield,fieldm,tmaxfdAir,stemaxAir, |
| 5846 | deemaxAir,epsilAir,stminAir); |
| 5847 | |
| 5848 | //AliMaterial(88,"ITS SANDW CFMDSDD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03); |
| 5849 | // From Pierluigi Barberis calculations of 1SDD+Carbon fiber October 2 2002 |
| 5850 | wW[0] = 0.016302; |
| 5851 | wW[1] = 0.461870; |
| 5852 | wW[2] = 0.033662; |
| 5853 | wW[3] = 0.163595; |
| 5854 | wW[4] = 0.000315; |
| 5855 | wW[5] = 0.001197; |
| 5856 | wW[6] = 0.000127; |
| 5857 | wW[7] = 0.004175; |
| 5858 | wW[8] = 0.000811; |
| 5859 | wW[9] = 0.311315; |
| 5860 | wW[10] = 0.006631; |
| 5861 | wW[11] = 0.000000; |
| 5862 | wW[12] = 0.000000; |
| 5863 | if(fByThick){// New values seeITS_MatBudget_4B.xls |
| 5864 | den = 1.9353276; // g/cm^3 Cell N370 |
| 5865 | }else{ |
| 5866 | den = 3.2788626; // g/cm^3 Cell F370 |
| 5867 | } // end if fByThick |
| 5868 | //den = 7667.1/(3671.58978); // Volume does not excludeholes |
| 5869 | AliMixture(88,"ITS SANDW CFMDSDD$",aA,zZ,den,+11,wW); |
| 5870 | AliMedium(88,"ITS SANDW CFMDSDD$",88,0,ifield,fieldm,tmaxfd,stemax, |
| 5871 | deemax,epsil,stmin); |
| 5872 | |
| 5873 | //AliMaterial(89,"ITS SANDW CFMDSSD$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03); |
| 5874 | // From Pierluigi Barberis calculations of SSD+Carbon fiber October 2 2002. |
| 5875 | wW[0] = 0.014065; |
| 5876 | wW[1] = 0.520598; |
| 5877 | wW[2] = 0.022650; |
| 5878 | wW[3] = 0.105018; |
| 5879 | wW[4] = 0.021768; |
| 5880 | wW[5] = 0.009952; |
| 5881 | wW[6] = 0.001051; |
| 5882 | wW[7] = 0.034700; |
| 5883 | wW[8] = 0.006740; |
| 5884 | wW[9] = 0.249406; |
| 5885 | wW[10] = 0.010345; |
| 5886 | wW[11] = 0.0003707; |
| 5887 | wW[12] = 0.000000; |
| 5888 | if(fByThick){// New values seeITS_MatBudget_4B.xls |
| 5889 | den = 1.6564275; // g/cm^3 Cell N304 |
| 5890 | }else{ |
| 5891 | den = 1.7028296; // g/cm^3 Cell F304 |
| 5892 | } // end if fByThick |
| 5893 | //den = 1166.5/(3671.58978); // Volume does not exclude holes |
| 5894 | AliMixture(89,"ITS SANDW CFMDSSD$",aA,zZ,den,+12,wW); |
| 5895 | AliMedium(89,"ITS SANDW CFMDSSD$",89,0,ifield,fieldm,tmaxfd,stemax, |
| 5896 | deemax,epsil,stmin); |
| 5897 | |
| 5898 | //AliMaterial(97,"SPD SERVICES$",0.12011E+02,0.60000E+01,0.41000E+00,0.90868E+02,0.99900E+03); |
| 5899 | // From Pierluigi Barberis calculations of 1SPD October 2 2002. |
| 5900 | wW[0] = 0.005970; |
| 5901 | wW[1] = 0.304704; |
| 5902 | wW[2] = 0.042510; |
| 5903 | wW[3] = 0.121715; |
| 5904 | wW[4] = 0.001118; |
| 5905 | wW[5] = 0.030948; |
| 5906 | wW[6] = 0.003270; |
| 5907 | wW[7] = 0.107910; |
| 5908 | wW[8] = 0.020960; |
| 5909 | wW[9] = 0.360895; |
| 5910 | wW[10] = 0.000000; |
| 5911 | wW[11] = 0.000000; |
| 5912 | wW[12] = 0.000000; |
| 5913 | if(fByThick){// New values seeITS_MatBudget_4B.xls |
| 5914 | den = 80.31136576; // g/cm^3 Cell H329 |
| 5915 | }else{ |
| 5916 | den = 87.13062; // g/cm^3 Cell G329 |
| 5917 | } // end if fByThick |
| 5918 | //den = 1251.3/(0.05*2.0*TMath::Pi()*(7.75*7.75 - 3.7*3.7)); // g/cm^3 |
| 5919 | AliMixture(97,"SPD SERVICES$",aA,zZ,den,+10,wW); |
| 5920 | AliMedium(97,"SPD SERVICES$",97,0,ifield,fieldm,tmaxfd,stemax, |
| 5921 | deemax,epsil,stmin); |
| 5922 | |
| 5923 | |
| 5924 | // Special media |
| 5925 | |
| b0c0f648 |
5926 | AliMaterial(90,"SPD shield$", 12.011, 6., 1.93 , 22.36, 999); |
| 108bd0fe |
5927 | AliMedium(90,"SPD shield$",90,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ); |
| 5928 | |
| 5929 | // SPD End Ladder (data from Petra Riedler) |
| 5930 | Float_t aSPDel[5] = {1.00794,12.0107,14.01,15.9994,63.54 }; |
| 5931 | Float_t zSPDel[5] = {1.,6.,7.,8.,29.}; |
| 5932 | Float_t wSPDel[5] = {0.004092,0.107274,0.011438,0.032476,0.844719}; |
| 5933 | Float_t dSPDel = 3.903403; |
| 5934 | |
| 5935 | // AliMaterial(91, "SPD End ladder$", 47.0447, 21.7963, 3.6374, 4.4711, 999); |
| 5936 | AliMixture(91,"SPD End ladder$",aSPDel,zSPDel,dSPDel,5,wSPDel); |
| 5937 | AliMedium(91,"SPD End ladder$",91,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ); |
| 5938 | |
| 5939 | AliMaterial(92, "SPD cone$",28.0855, 14., 2.33, 9.36, 999); |
| 5940 | AliMedium(92,"SPD cone$",92,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ); |
| 5941 | /* Material with fractional Z not actually used |
| 5942 | AliMaterial(93, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999); |
| 5943 | AliMedium(93,"SDD End ladder$",93,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ); |
| 5944 | */ |
| 5945 | AliMaterial(94, "SDD cone$",63.546, 29., 1.15, 1.265, 999); |
| 5946 | AliMedium(94,"SDD cone$",94,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ); |
| 5947 | /* Material with fractional Z not actually used |
| 5948 | AliMaterial(95, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999); |
| 5949 | AliMedium(95,"SSD End ladder$",95,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ); |
| 5950 | */ |
| 5951 | AliMaterial(96, "SSD cone$",63.546, 29., 1.15, 1.265, 999); |
| 5952 | AliMedium(96,"SSD cone$",96,0,ifield,fieldm,tmaxfdServ,stemaxServ,deemaxServ,epsilServ,stminServ); |
| cc8a4c78 |
5953 | |
| 5954 | AliMixture(98,"SDD OPTICFIB$",aoptfib,zoptfib,doptfib,-2,woptfib); |
| 5955 | AliMedium(98,"SDD OPTICFIB$",98,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 798b4e0c |
5956 | |
| 5957 | AliMixture(95,"SSD FEP$",aFEP,zFEP,dFEP,-2,wFEP); |
| 5958 | AliMedium(95,"SSD FEP$",95,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 5959 | |
| 5960 | // Mean material for low-voltage cables on SPD trays Side A |
| 5961 | // (Copper + PolyEthylene (C2-H4)) (D.Elia for cable number and |
| 5962 | // cross-section area, M.Sitta for elemental computation) - 26 Feb 10 |
| 5963 | wW[0] = 0.323024;//H |
| 5964 | wW[2] = 0.515464;//Cu |
| 5965 | wW[1] = 0.161512;//C |
| 5966 | wW[3] = 0.000000;//O |
| 5967 | wW[4] = 0.000000;//S |
| 5968 | wW[5] = 0.000000;//F |
| 5969 | wW[6] = 0.000000;//Sn |
| 5970 | wW[7] = 0.000000;//Pb |
| 5971 | wW[8] = 0.000000;//Cr |
| 5972 | wW[9] = 0.000000;//Si |
| 5973 | wW[10] = 0.000000;//Ni |
| 5974 | wW[11] = 0.000000;//Ca |
| 5975 | |
| 5976 | den = 5.078866; |
| 5977 | AliMixture(60,"SPD_LOWCABLES$",aA,zZ,den,+3,wW); |
| 5978 | AliMedium(60,"SPD_LOWCABLES$",60,0,ifield,fieldm,tmaxfd,stemax, |
| 5979 | deemax,epsil,stmin); |
| 5980 | |
| 96eb8210 |
5981 | // Mean material for high-voltage cables on SPD trays Side A & C |
| 5982 | // (Copper + HD PolyEthylene (C2-H2)) (D.Elia for cable number and |
| 5983 | // cross-section area, M.Sitta for elemental computation) - 10 Jun 10 |
| 5984 | wW[0] = 0.083766;//H |
| 5985 | wW[2] = 0.417136;//Cu |
| 5986 | wW[1] = 0.499098;//C |
| 5987 | wW[3] = 0.000000;//O |
| 5988 | wW[4] = 0.000000;//S |
| 5989 | wW[5] = 0.000000;//F |
| 5990 | wW[6] = 0.000000;//Sn |
| 5991 | wW[7] = 0.000000;//Pb |
| 5992 | wW[8] = 0.000000;//Cr |
| 5993 | wW[9] = 0.000000;//Si |
| 5994 | wW[10] = 0.000000;//Ni |
| 5995 | wW[11] = 0.000000;//Ca |
| 5996 | |
| 5997 | den = 1.514930; |
| 5998 | AliMixture(58,"SPD_HICABLES$",aA,zZ,den,+3,wW); |
| 5999 | AliMedium(58,"SPD_HICABLES$",58,0,ifield,fieldm,tmaxfd,stemax, |
| 6000 | deemax,epsil,stmin); |
| 6001 | |
| 798b4e0c |
6002 | // PolyUrethane [C25-H42-N2-O6] - 07 Mar 10 |
| 6003 | zZ[2] = 7.0; aA[2] = 14.0067; // Nitrogen - From Root TGeoElementTable |
| 6004 | |
| 6005 | wW[0] = 0.090724;//H |
| 6006 | wW[2] = 0.060035;//N |
| 6007 | wW[1] = 0.643513;//C |
| 6008 | wW[3] = 0.205728;//O |
| 6009 | wW[4] = 0.000000;//S |
| 6010 | wW[5] = 0.000000;//F |
| 6011 | wW[6] = 0.000000;//Sn |
| 6012 | wW[7] = 0.000000;//Pb |
| 6013 | wW[8] = 0.000000;//Cr |
| 6014 | wW[9] = 0.000000;//Si |
| 6015 | wW[10] = 0.000000;//Ni |
| 6016 | wW[11] = 0.000000;//Ca |
| 6017 | |
| 6018 | den = 1.158910; |
| 6019 | AliMixture(67,"POLYURETHANE$",aA,zZ,den,+4,wW); |
| 6020 | AliMedium(67,"POLYURETHANE$",67,0,ifield,fieldm,tmaxfd,stemax, |
| 6021 | deemax,epsil,stmin); |
| 44d18d38 |
6022 | |
| 6023 | // POM (Polyoxymethylene = (CH2O)n ) - 02 May 10 |
| 6024 | zZ[2] = 8.0; aA[2] = 15.9994; // Oxigen |
| 6025 | |
| 6026 | wW[0] = 0.067137;//H |
| 6027 | wW[1] = 0.400016;//C |
| 6028 | wW[2] = 0.532847;//O |
| 6029 | wW[3] = 0.000000;//O |
| 6030 | wW[4] = 0.000000;//S |
| 6031 | wW[5] = 0.000000;//F |
| 6032 | wW[6] = 0.000000;//Sn |
| 6033 | wW[7] = 0.000000;//Pb |
| 6034 | wW[8] = 0.000000;//Cr |
| 6035 | wW[9] = 0.000000;//Si |
| 6036 | wW[10] = 0.000000;//Ni |
| 6037 | wW[11] = 0.000000;//Ca |
| 6038 | |
| 6039 | den = 1.4200; |
| 6040 | AliMixture(57,"POLYOXYMETHYLENE$",aA,zZ,den,+3,wW); |
| 6041 | AliMedium(57,"POLYOXYMETHYLENE$",57,0,ifield,fieldm,tmaxfd,stemax, |
| 6042 | deemax,epsil,stmin); |
| 798b4e0c |
6043 | |
| 6044 | |
| f0a991bf |
6045 | // Anticorodal (Aliminum alloy) - 08 nov 10 |
| 6046 | // A,Z from Root TGeoElementTable, W from Web sites |
| 6047 | zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium |
| 6048 | zZ[1] = 29.0; aA[1] = 63.546 ; // Copper |
| 6049 | zZ[2] = 26.0; aA[2] = 55.845 ; // Iron |
| 6050 | zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese |
| 6051 | zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium |
| 6052 | zZ[5] = 14.0; aA[5] = 28.0855; // Silicon |
| 6053 | zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc |
| 6054 | zZ[7] = 24.0; aA[7] = 51.9961; // Chromium |
| 6055 | zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium |
| 6056 | |
| 6057 | wW[1] = 0.001000;//Cu |
| 6058 | wW[2] = 0.005000;//Fe |
| 6059 | wW[3] = 0.007000;//Mn - mean value |
| 6060 | wW[4] = 0.009000;//Mg - mean value |
| 6061 | wW[5] = 0.001000;//Si - mean value |
| 6062 | wW[6] = 0.002000;//Zn |
| 6063 | wW[7] = 0.002500;//Cr |
| 6064 | wW[8] = 0.001000;//Ti |
| 6065 | |
| 6066 | Double_t totFrac = 0; |
| 6067 | for (Int_t j=1; j<9; j++) |
| 6068 | totFrac += wW[j]; |
| 6069 | wW[0] = 1. - totFrac;//Al - the remainder |
| 6070 | |
| 6071 | den = 2.69; |
| 6072 | AliMixture(93,"ANTICORODAL$",aA,zZ,den,+9,wW); |
| 798b4e0c |
6073 | AliMedium(93,"ANTICORODAL$",93,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| f0a991bf |
6074 | |
| 6075 | // Hokotol (another Aluminium alloy) - 08 nov 10 |
| 6076 | // A,Z from Root TGeoElementTable, W from Web sites |
| 6077 | zZ[0] = 13.0; aA[0] = 26.9815; // Aluminium |
| 6078 | zZ[1] = 29.0; aA[1] = 63.546 ; // Copper |
| 6079 | zZ[2] = 26.0; aA[2] = 55.845 ; // Iron |
| 6080 | zZ[3] = 25.0; aA[3] = 54.938 ; // Manganese |
| 6081 | zZ[4] = 12.0; aA[4] = 24.305 ; // Magnesium |
| 6082 | zZ[5] = 14.0; aA[5] = 28.0855; // Silicon |
| 6083 | zZ[6] = 30.0; aA[6] = 65.39 ; // Zinc |
| 6084 | zZ[7] = 24.0; aA[7] = 51.9961; // Chromium |
| 6085 | zZ[8] = 22.0; aA[8] = 47.867 ; // Titanium |
| 6086 | zZ[9] = 40.0; aA[9] = 91.224 ; // Zirconium |
| 6087 | |
| 6088 | wW[1] = 0.020500;//Cu - mean value |
| 6089 | wW[2] = 0.000300;//Fe |
| 6090 | wW[3] = 0.022000;//Mn - mean value |
| 6091 | wW[4] = 0.001000;//Mg - mean value |
| 6092 | wW[5] = 0.002000;//Si - mean value |
| 6093 | wW[6] = 0.066500;//Zn |
| 6094 | wW[7] = 0.005000;//Cr |
| 6095 | wW[8] = 0.000600;//Ti |
| 6096 | wW[9] = 0.001650;//Zr - mean value |
| 6097 | |
| 6098 | totFrac = 0; |
| 6099 | for (Int_t j=1; j<10; j++) |
| 6100 | totFrac += wW[j]; |
| 6101 | wW[0] = 1. - totFrac;//Al - the remainder |
| 6102 | |
| 6103 | den = 2.69; |
| 6104 | AliMixture(34,"HOKOTOL$",aA,zZ,den,+10,wW); |
| 6105 | AliMedium(34,"HOKOTOL$",34,0,ifield,fieldm,tmaxfd,stemax,deemax,epsil,stmin); |
| 798b4e0c |
6106 | |
| 108bd0fe |
6107 | } |
| 6108 | |
| 108bd0fe |
6109 | //______________________________________________________________________ |
| 6110 | void AliITSv11Hybrid::Init(){ |
| 6111 | // Initialise the ITS after it has been created. |
| 6112 | // Inputs: |
| 6113 | // none. |
| 6114 | // Outputs: |
| 6115 | // none. |
| 6116 | // Return: |
| 6117 | // none. |
| 6118 | |
| 6119 | AliDebug(1,Form("Init: Major version %d Minor version %d",fMajorVersion, |
| 6120 | fMinorVersion)); |
| 108bd0fe |
6121 | UpdateInternalGeometry(); |
| 6122 | AliITS::Init(); |
| 108bd0fe |
6123 | |
| 108bd0fe |
6124 | fIDMother = gMC->VolId("ITSV"); // ITS Mother Volume ID. |
| 6125 | } |
| bf210566 |
6126 | |
| 108bd0fe |
6127 | //______________________________________________________________________ |
| 6128 | void AliITSv11Hybrid::SetDefaults(){ |
| 6129 | // sets the default segmentation, response, digit and raw cluster classes |
| 6130 | // Inputs: |
| 6131 | // none. |
| 6132 | // Outputs: |
| 6133 | // none. |
| 6134 | // Return: |
| 6135 | // none. |
| 6136 | |
| 108bd0fe |
6137 | if(!fDetTypeSim){ |
| 6138 | Warning("SetDefaults","Error fDetTypeSim not defined"); |
| 6139 | return; |
| 6140 | } |
| 6141 | |
| 108bd0fe |
6142 | fDetTypeSim->SetDefaults(); |
| 6143 | |
| fa4f0f62 |
6144 | |
| 108bd0fe |
6145 | if(fgkNTYPES>3){ |
| 6146 | Warning("SetDefaults", |
| 6147 | "Only the four basic detector types are initialised!"); |
| 6148 | }// end if |
| 6149 | return; |
| 6150 | } |
| 108bd0fe |
6151 | //______________________________________________________________________ |
| 6152 | void AliITSv11Hybrid::StepManager(){ |
| 6153 | // Called for every step in the ITS, then calles the AliITShit class |
| 6154 | // creator with the information to be recoreded about that hit. |
| 6155 | // The value of the macro ALIITSPRINTGEOM if set to 1 will allow the |
| 6156 | // printing of information to a file which can be used to create a .det |
| 6157 | // file read in by the routine CreateGeometry(). If set to 0 or any other |
| 6158 | // value except 1, the default behavior, then no such file is created nor |
| 6159 | // it the extra variables and the like used in the printing allocated. |
| 6160 | // Inputs: |
| 6161 | // none. |
| 6162 | // Outputs: |
| 6163 | // none. |
| 6164 | // Return: |
| 6165 | // none. |
| 6166 | |
| 012f0f4c |
6167 | if(!(this->IsActive())) return; |
| 108bd0fe |
6168 | if(!(gMC->TrackCharge())) return; |
| 6169 | |
| bf210566 |
6170 | Int_t copy, lay = 0; |
| 6171 | Int_t id = gMC->CurrentVolID(copy); |
| 6172 | |
| 7b208ef4 |
6173 | Bool_t notSens = kFALSE; |
| 6174 | while ((lay<fIdN) && (notSens = id != fIdSens[lay])) ++lay; |
| bf210566 |
6175 | if (notSens) return; |
| 75473741 |
6176 | |
| bf210566 |
6177 | if(gMC->IsTrackExiting()) { |
| e6add757 |
6178 | AddTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber(), AliTrackReference::kITS); |
| 108bd0fe |
6179 | } // if Outer ITS mother Volume |
| 6180 | |
| 75473741 |
6181 | static TLorentzVector position, momentum; // Saves on calls to construtors |
| 6182 | static AliITShit hit;// Saves on calls to constructors |
| bf210566 |
6183 | |
| 012f0f4c |
6184 | TClonesArray &lhits = *(Hits()); |
| bf210566 |
6185 | Int_t cpn0, cpn1, mod, status = 0; |
| 75473741 |
6186 | // |
| 108bd0fe |
6187 | // Track status |
| 012f0f4c |
6188 | if(gMC->IsTrackInside()) status += 1; |
| 6189 | if(gMC->IsTrackEntering()) status += 2; |
| 6190 | if(gMC->IsTrackExiting()) status += 4; |
| 6191 | if(gMC->IsTrackOut()) status += 8; |
| 6192 | if(gMC->IsTrackDisappeared()) status += 16; |
| 6193 | if(gMC->IsTrackStop()) status += 32; |
| 6194 | if(gMC->IsTrackAlive()) status += 64; |
| bf210566 |
6195 | |
| 8f8273a4 |
6196 | // |
| 6197 | // retrieve the indices with the volume path |
| 75473741 |
6198 | // |
| 012f0f4c |
6199 | switch (lay) { |
| 75473741 |
6200 | case 0:case 1: // SPD |
| 8f8273a4 |
6201 | if (AliITSInitGeometry::SPDIsTGeoNative()) { |
| 6202 | gMC->CurrentVolOffID(1,copy); // ladder |
| 6203 | gMC->CurrentVolOffID(3,cpn1); // stave |
| 6204 | gMC->CurrentVolOffID(5,cpn0); // sector |
| 6205 | } else { |
| 6206 | gMC->CurrentVolOffID(2,copy); |
| 6207 | gMC->CurrentVolOffID(4,cpn1); |
| 6208 | gMC->CurrentVolOffID(5,cpn0); |
| 6209 | }; |
| 75473741 |
6210 | break; |
| 6211 | case 2:case 3: // SDD |
| bf210566 |
6212 | copy = 1; |
| 75473741 |
6213 | if (AliITSInitGeometry::SDDIsTGeoNative()) { |
| 6214 | gMC->CurrentVolOffID(2,cpn1); |
| 6215 | gMC->CurrentVolOffID(3,cpn0); |
| 6216 | } else { |
| 6217 | gMC->CurrentVolOffID(1,cpn1); |
| 6218 | gMC->CurrentVolOffID(2,cpn0); |
| 6219 | }; |
| 6220 | break; |
| 6221 | case 4:case 5: // SSD |
| bf210566 |
6222 | copy = 1; |
| 8f8273a4 |
6223 | //if (AliITSInitGeometry::SSDIsTGeoNative()) { |
| 6224 | // same levels for old and new geom |
| bf210566 |
6225 | gMC->CurrentVolOffID(1,cpn1); |
| 6226 | gMC->CurrentVolOffID(2,cpn0); |
| 75473741 |
6227 | break; |
| 6228 | default: |
| bf210566 |
6229 | AliError(Form("Invalid value: lay= %d . Not an ITS sensitive volume",lay)); |
| 75473741 |
6230 | return; // not an ITS sensitive volume. |
| 6231 | } // |
| 8f8273a4 |
6232 | |
| bf210566 |
6233 | fInitGeom.DecodeDetector(mod,lay+1,cpn0,cpn1,copy); |
| 8f8273a4 |
6234 | // We should not need to pass by the switch ! |
| 6235 | // This is time consuming... |
| 6236 | // therefore DecodeDetectorv11Hybrid(...) shouldn't be private ! |
| dbfc6ce6 |
6237 | // and we should be able to use instead : |
| 8f8273a4 |
6238 | //fInitGeom.DecodeDetectorv11Hybrid(mod,lay+1,cpn0,cpn1,copy); |
| 108bd0fe |
6239 | |
| 75473741 |
6240 | // |
| 6241 | // Fill hit structure. |
| 6242 | // |
| 012f0f4c |
6243 | hit.SetModule(mod); |
| 6244 | hit.SetTrack(gAlice->GetMCApp()->GetCurrentTrackNumber()); |
| 108bd0fe |
6245 | gMC->TrackPosition(position); |
| 6246 | gMC->TrackMomentum(momentum); |
| 012f0f4c |
6247 | hit.SetPosition(position); |
| 6248 | hit.SetTime(gMC->TrackTime()); |
| 6249 | hit.SetMomentum(momentum); |
| 6250 | hit.SetStatus(status); |
| 6251 | hit.SetEdep(gMC->Edep()); |
| 6252 | hit.SetShunt(GetIshunt()); |
| 6253 | if(gMC->IsTrackEntering()){ |
| 6254 | hit.SetStartPosition(position); |
| 6255 | hit.SetStartTime(gMC->TrackTime()); |
| 6256 | hit.SetStartStatus(status); |
| 6257 | return; // don't save entering hit. |
| 108bd0fe |
6258 | } // end if IsEntering |
| 6259 | // Fill hit structure with this new hit. |
| 012f0f4c |
6260 | //Info("StepManager","Calling Copy Constructor"); |
| 6261 | new(lhits[fNhits++]) AliITShit(hit); // Use Copy Construtor. |
| 6262 | // Save old position... for next hit. |
| 6263 | hit.SetStartPosition(position); |
| 6264 | hit.SetStartTime(gMC->TrackTime()); |
| 6265 | hit.SetStartStatus(status); |
| 108bd0fe |
6266 | |
| 6267 | return; |
| 6268 | } |
| 3a299c65 |
6269 | |
git://git.uio.no / u / mrichter / AliRoot.git / blame