]>
Commit | Line | Data |
---|---|---|
5d5bdf03 | 1 | /************************************************************************** |
33959f40 | 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
51bc27f4 | 18 | Revision 1.26 2001/05/25 15:59:59 morsch |
19 | Overlaps corrected. (R. Barbera) | |
20 | ||
c2685204 | 21 | Revision 1.25 2001/05/03 08:40:15 barbera |
22 | Volume ITSD slightly modified to be consistent with v5. Some improvement in the printouts. The last commit did not complete successfully. | |
23 | ||
1e9111db | 24 | Revision 1.23 2001/04/04 07:02:16 barbera |
25 | Position of the cylinders holding rails corrected | |
26 | ||
27c5763c | 27 | Revision 1.22 2001/03/29 22:01:53 barbera |
28 | New flag added to change the material for some service supports as asked by the PMD people. Some changes to the services due to the new drawings from the engineers | |
29 | ||
72923d44 | 30 | Revision 1.21 2001/03/29 05:28:56 barbera |
31 | Rails material changed from aluminum to carbon fiber according with the decision of the last Technical Board | |
32 | ||
31683195 | 33 | Revision 1.20 2001/03/28 06:40:21 barbera |
34 | Central and services mother volumes made consistenf for detailed and coarse geometry. Switch for rails added to the coarse geometries | |
35 | ||
e4f08ac3 | 36 | Revision 1.19 2001/03/13 18:13:30 barbera |
37 | Some mother volumes sligthly modified to eliminate an overlap with the absorber | |
38 | ||
45725ec9 | 39 | Revision 1.18 2001/02/19 09:44:16 barbera |
40 | Copy no.2 of volume ICO2 re-inserted | |
41 | ||
1a366a10 | 42 | Revision 1.17 2001/02/09 00:05:31 nilsen |
43 | Added fMajor/MinorVersion variables and made other changes to better make | |
44 | use of the new code changes in AliITSgeom related classes. | |
45 | ||
bae7e562 | 46 | Revision 1.16 2001/01/30 09:23:13 hristov |
47 | Streamers removed (R.Brun) | |
48 | ||
a8a6107b | 49 | Revision 1.15 2001/01/17 07:41:29 barbera |
50 | Some media parameters modified | |
51 | ||
9cd18c59 | 52 | Revision 1.14 2001/01/15 13:13:53 barbera |
53 | Some comments added | |
54 | ||
faec2e21 | 55 | Revision 1.13 2000/12/10 16:00:45 barbera |
56 | Added last definition of special media like end-ladder boxes and cones | |
57 | ||
89909db5 | 58 | Revision 1.12 2000/11/02 15:44:23 barbera |
59 | Services on the opposite side w.r.t the absorber modified to make room for rails | |
60 | ||
4ebc1b6a | 61 | Revision 1.10 2000/10/27 17:19:50 barbera |
62 | Position of rails w.r.t. the interaction point corrected. | |
63 | ||
acb52b3d | 64 | Revision 1.9 2000/10/27 13:31:29 barbera |
65 | Rails between ITS and TPC added. | |
66 | ||
c54243df | 67 | Revision 1.8 2000/10/27 13:03:08 barbera |
68 | Small changes in the SPD volumes and materials | |
69 | ||
6c251614 | 70 | Revision 1.6 2000/10/16 14:45:37 barbera |
71 | Mother volume ITSD modified to avoid some overlaps | |
72 | ||
e8031268 | 73 | Revision 1.5 2000/10/16 13:49:15 barbera |
74 | Services volumes slightly modified and material added following Pierluigi Barberis' information | |
75 | ||
e6892b92 | 76 | Revision 1.4 2000/10/07 15:33:07 barbera |
77 | Small corrections to the ITSV mother volume | |
78 | ||
990d421f | 79 | Revision 1.3 2000/10/07 13:06:50 barbera |
80 | Some new materials and media defined | |
81 | ||
d12d92a5 | 82 | Revision 1.2 2000/10/07 10:58:15 barbera |
83 | Mother volume ITSV corrected | |
84 | ||
b16d3d87 | 85 | Revision 1.1 2000/10/06 23:09:24 barbera |
86 | New coarse geometry (asymmetric services | |
87 | ||
33959f40 | 88 | Revision 1.20 2000/10/02 21:28:08 fca |
89 | Removal of useless dependecies via forward declarations | |
90 | ||
91 | Revision 1.19 2000/07/10 16:07:19 fca | |
92 | Release version of ITS code | |
93 | ||
94 | Revision 1.14.2.2 2000/05/19 10:09:21 nilsen | |
95 | fix for bug with HP and Sun unix + fix for event display in ITS-working branch | |
96 | ||
97 | Revision 1.14.2.1 2000/03/04 23:45:19 nilsen | |
98 | Fixed up the comments/documentation. | |
99 | ||
100 | Revision 1.14 1999/11/25 06:52:56 fca | |
101 | Correct value of drca | |
102 | ||
103 | Revision 1.13.2.1 1999/11/25 06:52:21 fca | |
104 | Correct value of drca | |
105 | ||
106 | Revision 1.13 1999/10/27 11:16:26 fca | |
107 | Correction of problem in geometry | |
108 | ||
109 | Revision 1.12 1999/10/22 08:25:25 fca | |
110 | remove double definition of destructors | |
111 | ||
112 | Revision 1.11 1999/10/22 08:16:49 fca | |
113 | Correct destructors, thanks to I.Hrivnacova | |
114 | ||
115 | Revision 1.10 1999/10/06 19:56:50 fca | |
116 | Add destructor | |
117 | ||
118 | Revision 1.9 1999/10/05 08:05:09 fca | |
119 | Minor corrections for uninitialised variables. | |
120 | ||
121 | Revision 1.8 1999/09/29 09:24:20 fca | |
122 | Introduction of the Copyright and cvs Log | |
123 | ||
124 | */ | |
125 | ||
126 | /////////////////////////////////////////////////////////////////////////////// | |
127 | // // | |
128 | // Inner Traking System version PPR coarse asymmetric // | |
129 | // This class contains the base procedures for the Inner Tracking System // | |
130 | // // | |
131 | // Authors: R. Barbera | |
132 | // version 6. | |
133 | // Created 2000. | |
134 | // | |
135 | // NOTE: THIS IS THE COARSE ASYMMETRIC PPR geometry of the ITS. | |
136 | // THIS WILL NOT WORK | |
137 | // with the geometry or module classes or any analysis classes. You are | |
138 | // strongly encouraged to uses AliITSv5. | |
139 | // // | |
140 | /////////////////////////////////////////////////////////////////////////////// | |
bae7e562 | 141 | #include <iostream.h> |
33959f40 | 142 | #include <TMath.h> |
143 | #include <TRandom.h> | |
144 | #include <TVector.h> | |
145 | #include <TGeometry.h> | |
146 | #include <TNode.h> | |
147 | #include <TTUBE.h> | |
148 | #include <TFile.h> // only required for Tracking function? | |
149 | #include <TCanvas.h> | |
150 | #include <TObjArray.h> | |
151 | #include <TClonesArray.h> | |
152 | ||
153 | ||
154 | #include "AliMC.h" | |
155 | #include "AliMagF.h" | |
156 | #include "AliConst.h" | |
157 | ||
158 | #include "AliITShit.h" | |
159 | #include "AliITSvPPRcoarseasymm.h" | |
160 | #include "AliRun.h" | |
161 | ||
162 | ||
163 | ClassImp(AliITSvPPRcoarseasymm) | |
164 | ||
165 | //_____________________________________________________________________________ | |
166 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm() { | |
167 | //////////////////////////////////////////////////////////////////////// | |
168 | // Standard default constructor for the ITS version 6. | |
169 | //////////////////////////////////////////////////////////////////////// | |
170 | ||
bae7e562 | 171 | fIdN = 0; |
172 | fIdName = 0; | |
173 | fIdSens = 0; | |
174 | fMajorVersion = 9; | |
175 | fMinorVersion = 0; | |
33959f40 | 176 | } |
177 | //_____________________________________________________________________________ | |
178 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const char *name, const char *title) : AliITS(name, title){ | |
179 | //////////////////////////////////////////////////////////////////////// | |
180 | // Standard constructor for the ITS version 6. | |
181 | //////////////////////////////////////////////////////////////////////// | |
182 | ||
bae7e562 | 183 | fIdN = 6; |
184 | fIdName = new TString[fIdN]; | |
185 | fIdName[0] = "ITS1"; | |
186 | fIdName[1] = "ITS2"; | |
187 | fIdName[2] = "ITS3"; | |
188 | fIdName[3] = "ITS4"; | |
189 | fIdName[4] = "ITS5"; | |
190 | fIdName[5] = "ITS6"; | |
191 | fIdSens = new Int_t[fIdN]; | |
192 | for (Int_t i=0;i<fIdN;i++) fIdSens[i]=0; | |
193 | fMajorVersion = 9; | |
194 | fMinorVersion = 0; | |
33959f40 | 195 | } |
196 | //____________________________________________________________________________ | |
197 | AliITSvPPRcoarseasymm::AliITSvPPRcoarseasymm(const AliITSvPPRcoarseasymm &source){ | |
198 | //////////////////////////////////////////////////////////////////////// | |
199 | // Copy Constructor for ITS version 6. | |
200 | //////////////////////////////////////////////////////////////////////// | |
201 | if(&source == this) return; | |
bae7e562 | 202 | Warning("Copy Constructor","Not allowed to copy AliITSvPPRcoarseasymm"); |
33959f40 | 203 | return; |
204 | } | |
205 | //_____________________________________________________________________________ | |
206 | AliITSvPPRcoarseasymm& AliITSvPPRcoarseasymm::operator=(const AliITSvPPRcoarseasymm &source){ | |
207 | //////////////////////////////////////////////////////////////////////// | |
208 | // Assignment operator for the ITS version 6. | |
209 | //////////////////////////////////////////////////////////////////////// | |
210 | if(&source == this) return *this; | |
bae7e562 | 211 | Warning("= operator","Not allowed to copy AliITSvPPRcoarseasymm"); |
33959f40 | 212 | return *this; |
213 | } | |
214 | //_____________________________________________________________________________ | |
215 | AliITSvPPRcoarseasymm::~AliITSvPPRcoarseasymm() { | |
216 | //////////////////////////////////////////////////////////////////////// | |
217 | // Standard destructor for the ITS version 6. | |
218 | //////////////////////////////////////////////////////////////////////// | |
219 | } | |
220 | ||
221 | //__________________________________________________________________________ | |
222 | void AliITSvPPRcoarseasymm::BuildGeometry(){ | |
223 | //////////////////////////////////////////////////////////////////////// | |
224 | // Geometry builder for the ITS version 6. | |
225 | //////////////////////////////////////////////////////////////////////// | |
226 | TNode *node, *top; | |
51bc27f4 | 227 | const Int_t kColorITS=kYellow; |
33959f40 | 228 | // |
229 | top = gAlice->GetGeometry()->GetNode("alice"); | |
230 | ||
51bc27f4 | 231 | new TTUBE("S_layer1","Layer1 of ITS","void",3.8095,3.8095+1.03*9.36/100.,14.35); |
33959f40 | 232 | top->cd(); |
233 | node = new TNode("Layer1","Layer1","S_layer1",0,0,0,""); | |
234 | node->SetLineColor(kColorITS); | |
235 | fNodes->Add(node); | |
236 | ||
51bc27f4 | 237 | new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+1.03*9.36/100.,14.35); |
33959f40 | 238 | top->cd(); |
239 | node = new TNode("Layer2","Layer2","S_layer2",0,0,0,""); | |
240 | node->SetLineColor(kColorITS); | |
241 | fNodes->Add(node); | |
242 | ||
51bc27f4 | 243 | new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.94*9.36/100.,25.1); |
33959f40 | 244 | top->cd(); |
245 | node = new TNode("Layer3","Layer3","S_layer3",0,0,0,""); | |
246 | node->SetLineColor(kColorITS); | |
247 | fNodes->Add(node); | |
248 | ||
51bc27f4 | 249 | new TTUBE("S_layer4","Layer4 of ITS","void",24.1,24.1+0.95*9.36/100.,32.1); |
33959f40 | 250 | top->cd(); |
251 | node = new TNode("Layer4","Layer4","S_layer4",0,0,0,""); | |
252 | node->SetLineColor(kColorITS); | |
253 | fNodes->Add(node); | |
254 | ||
51bc27f4 | 255 | new TTUBE("S_layer5","Layer5 of ITS","void",38.5,38.5+0.91*9.36/100.,49.405); |
33959f40 | 256 | top->cd(); |
257 | node = new TNode("Layer5","Layer5","S_layer5",0,0,0,""); | |
258 | node->SetLineColor(kColorITS); | |
259 | fNodes->Add(node); | |
260 | ||
51bc27f4 | 261 | new TTUBE("S_layer6","Layer6 of ITS","void",43.5765,43.5765+0.87*9.36/100.,55.27); |
33959f40 | 262 | top->cd(); |
263 | node = new TNode("Layer6","Layer6","S_layer6",0,0,0,""); | |
264 | node->SetLineColor(kColorITS); | |
265 | fNodes->Add(node); | |
266 | } | |
267 | //_____________________________________________________________________________ | |
268 | void AliITSvPPRcoarseasymm::CreateGeometry(){ | |
269 | //////////////////////////////////////////////////////////////////////// | |
270 | // This routine defines and Creates the geometry for version 6 of the ITS. | |
271 | //////////////////////////////////////////////////////////////////////// | |
272 | ||
273 | //INNER RADII OF THE SILICON LAYERS | |
51bc27f4 | 274 | Float_t rl[6] = { 3.8095,7.,15.,24.,38.5,43.5765 }; |
33959f40 | 275 | //THICKNESSES OF LAYERS (in % radiation length) |
6c251614 | 276 | Float_t drl[6] = { 1.03,1.03,0.94,0.95,0.91,0.87 }; |
33959f40 | 277 | //HALF LENGTHS OF LAYERS |
6c251614 | 278 | Float_t dzl[6] = { 14.35,14.35,25.1,32.1,49.405,55.27 }; |
33959f40 | 279 | //LENGTHS OF END-LADDER BOXES (ALL INCLUDED) |
89909db5 | 280 | Float_t dzb[6] = { 12.4,12.4,13.5,15.,7.5,7.5 }; |
33959f40 | 281 | //THICKNESSES OF END-LADDER BOXES (ALL INCLUDED) |
89909db5 | 282 | Float_t drb[6] = { rl[1]-rl[0],0.2,5.,5.,4.,4. }; |
33959f40 | 283 | |
284 | ||
285 | Float_t dits[3], rlim, zmax; | |
286 | Float_t zpos; | |
e4f08ac3 | 287 | Float_t pcits[100], ztpc; |
288 | Int_t idrotm[1999], i; | |
289 | Float_t dgh[100]; | |
290 | ||
e4f08ac3 | 291 | Int_t rails = 1; // flag for rails (1 --> rails in; 0 --> rails out) |
72923d44 | 292 | Int_t suppmat = 0; // flag to change the material of the services |
293 | // supports (=0 copper, =1 aluminum, =2 carbon) | |
e4f08ac3 | 294 | rails = GetRails(); |
33959f40 | 295 | |
e4f08ac3 | 296 | if(rails != 0 && rails != 1) { |
1e9111db | 297 | cout << "ITS - WARNING: the switch for rails is not set neither to 0 (rails out) nor to 1 (rails in)." |
e4f08ac3 | 298 | " The default value of 1 (rails in) will be used." << endl; |
e4f08ac3 | 299 | } |
300 | ||
72923d44 | 301 | if (rails == 0 ) { |
1e9111db | 302 | cout << "ITS: Rails are out." << endl; |
e4f08ac3 | 303 | } else { |
1e9111db | 304 | cout << "ITS: Rails are in." << endl; |
e4f08ac3 | 305 | } |
72923d44 | 306 | |
307 | suppmat = GetSupportMaterial(); | |
308 | ||
309 | if (suppmat != 0 && suppmat != 1 && suppmat != 2) { | |
1e9111db | 310 | cout << "ITS - WARNING: the flag for the material of services supports is not set neither to 0 (copper) nor to 1 (aluminum) nor to 2 (carbon)." |
72923d44 | 311 | " The default value of 0 (copper) will be used." << endl; |
312 | } | |
313 | ||
314 | if (suppmat == 0) { | |
1e9111db | 315 | cout << "ITS: The material of the services supports is copper." << endl; |
72923d44 | 316 | } else if (suppmat == 1){ |
1e9111db | 317 | cout << "ITS: The material of the services supports is aluminum." << endl; |
72923d44 | 318 | } else { |
1e9111db | 319 | cout << "ITS: The material of the services supports is carbon." << endl; |
72923d44 | 320 | } |
321 | ||
e4f08ac3 | 322 | |
33959f40 | 323 | Int_t *idtmed = fIdtmed->GetArray()-199; |
324 | ||
325 | // CONVERT INTO CM (RL(SI)=9.36 CM) | |
326 | for (i = 0; i < 6; ++i) { | |
327 | drl[i] = drl[i] / 100. * 9.36; | |
328 | } | |
329 | ||
330 | // FIELD CAGE HALF LENGTH | |
331 | ||
1e9111db | 332 | rlim = 50.; |
e4f08ac3 | 333 | zmax = 74.; |
334 | ztpc = 284.; | |
33959f40 | 335 | |
b16d3d87 | 336 | // --- Define ghost volume containing the whole ITS (including services) |
337 | // and fill it with air | |
338 | ||
339 | dgh[0] = 0.; | |
340 | dgh[1] = 360.; | |
e4f08ac3 | 341 | dgh[2] = 16.; |
342 | dgh[3] = -ztpc-5.-0.1; | |
343 | dgh[4] = 46; | |
b16d3d87 | 344 | dgh[5] = 85.; |
e4f08ac3 | 345 | dgh[6] = -ztpc; |
346 | dgh[7] = 46; | |
b16d3d87 | 347 | dgh[8] = 85.; |
e4f08ac3 | 348 | dgh[9] = -ztpc; |
349 | dgh[10] = 46; | |
1e9111db | 350 | dgh[11] = rlim+6; |
e4f08ac3 | 351 | dgh[12] = -97.5; |
352 | dgh[13] = 46; | |
1e9111db | 353 | dgh[14] = rlim+6; |
e4f08ac3 | 354 | dgh[15] = -zmax; |
355 | dgh[16] = 46; | |
1e9111db | 356 | dgh[17] = rlim+6; |
e4f08ac3 | 357 | dgh[18] = -48; |
358 | dgh[19] = 6; | |
1e9111db | 359 | dgh[20] = rlim+6; |
e4f08ac3 | 360 | dgh[21] = -28.6; |
361 | dgh[22] = 6; | |
1e9111db | 362 | dgh[23] = rlim+6; |
e4f08ac3 | 363 | dgh[24] = -27.6; |
364 | dgh[25] = 3.295; | |
1e9111db | 365 | dgh[26] = rlim+6; |
e4f08ac3 | 366 | dgh[27] = 27.6; |
367 | dgh[28] = 3.295; | |
1e9111db | 368 | dgh[29] = rlim+6; |
e4f08ac3 | 369 | dgh[30] = 28.6; |
370 | dgh[31] = 6; | |
1e9111db | 371 | dgh[32] = rlim+6; |
e4f08ac3 | 372 | dgh[33] = 48; |
373 | dgh[34] = 6; | |
1e9111db | 374 | dgh[35] = rlim+6; |
e4f08ac3 | 375 | dgh[36] = zmax; |
376 | dgh[37] = 46; | |
1e9111db | 377 | dgh[38] = rlim+6; |
e4f08ac3 | 378 | dgh[39] = 97.5; |
379 | dgh[40] = 46; | |
1e9111db | 380 | dgh[41] = rlim+6; |
e4f08ac3 | 381 | dgh[42] = ztpc; |
382 | dgh[43] = 62; | |
383 | dgh[44] = 62+4.; | |
384 | dgh[45] = ztpc; | |
385 | dgh[46] = 62; | |
386 | dgh[47] = 85.; | |
387 | dgh[48] = ztpc+4.+0.1; | |
388 | dgh[49] = 62.4; | |
389 | dgh[50] = 85.; | |
390 | gMC->Gsvolu("ITSV", "PCON", idtmed[275], dgh, 51); | |
b16d3d87 | 391 | |
392 | // --- Place the ghost volume in its mother volume (ALIC) and make it | |
393 | // invisible | |
394 | ||
395 | gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY"); | |
e4f08ac3 | 396 | //gMC->Gsatt("ITSV", "SEEN", 0); |
b16d3d87 | 397 | |
398 | ||
33959f40 | 399 | // --- Define ghost volume containing the six layers and fill it with air |
400 | ||
401 | dgh[0] = 0.; | |
402 | dgh[1] = 360.; | |
e4f08ac3 | 403 | dgh[2] = 8.; |
404 | dgh[3] = -zmax; | |
45725ec9 | 405 | dgh[4] = 46.; |
e4f08ac3 | 406 | dgh[5] = rlim; |
407 | dgh[6] = -47.5; | |
408 | dgh[7] = 6.005; | |
409 | dgh[8] = rlim; | |
410 | dgh[9] = -28.5; | |
411 | dgh[10] = 6.005; | |
412 | dgh[11] = rlim; | |
413 | dgh[12] = -27.5; | |
414 | dgh[13] = 3.3; | |
415 | dgh[14] = rlim; | |
416 | dgh[15] = 27.5; | |
417 | dgh[16] = 3.3; | |
418 | dgh[17] = rlim; | |
419 | dgh[18] = 28.5; | |
420 | dgh[19] = 6.005; | |
421 | dgh[20] = rlim; | |
422 | dgh[21] = 47.5; | |
423 | dgh[22] = 6.005; | |
424 | dgh[23] = rlim; | |
425 | dgh[24] = zmax; | |
426 | dgh[25] = 46.; | |
427 | dgh[26] = rlim; | |
428 | gMC->Gsvolu("ITSD", "PCON", idtmed[275], dgh, 27); | |
33959f40 | 429 | |
430 | // --- Place the ghost volume in its mother volume (ITSV) and make it | |
431 | // invisible | |
432 | ||
b16d3d87 | 433 | gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY"); |
146fb996 | 434 | //gMC->Gsatt("ITSD", "SEEN", 0); |
33959f40 | 435 | |
e4f08ac3 | 436 | |
33959f40 | 437 | // ITS LAYERS (SILICON) |
438 | ||
439 | dits[0] = rl[0]; | |
440 | dits[1] = rl[0] + drl[0]; | |
441 | dits[2] = dzl[0]; | |
442 | gMC->Gsvolu("ITS1", "TUBE", idtmed[199], dits, 3); | |
b16d3d87 | 443 | gMC->Gspos("ITS1", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 444 | |
445 | dits[0] = rl[1]; | |
446 | dits[1] = rl[1] + drl[1]; | |
447 | dits[2] = dzl[1]; | |
448 | gMC->Gsvolu("ITS2", "TUBE", idtmed[199], dits, 3); | |
b16d3d87 | 449 | gMC->Gspos("ITS2", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 450 | |
451 | dits[0] = rl[2]; | |
452 | dits[1] = rl[2] + drl[2]; | |
453 | dits[2] = dzl[2]; | |
454 | gMC->Gsvolu("ITS3", "TUBE", idtmed[224], dits, 3); | |
b16d3d87 | 455 | gMC->Gspos("ITS3", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 456 | |
457 | dits[0] = rl[3]; | |
458 | dits[1] = rl[3] + drl[3]; | |
459 | dits[2] = dzl[3]; | |
460 | gMC->Gsvolu("ITS4", "TUBE", idtmed[224], dits, 3); | |
b16d3d87 | 461 | gMC->Gspos("ITS4", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 462 | |
463 | dits[0] = rl[4]; | |
464 | dits[1] = rl[4] + drl[4]; | |
465 | dits[2] = dzl[4]; | |
466 | gMC->Gsvolu("ITS5", "TUBE", idtmed[249], dits, 3); | |
b16d3d87 | 467 | gMC->Gspos("ITS5", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 468 | |
469 | dits[0] = rl[5]; | |
470 | dits[1] = rl[5] + drl[5]; | |
471 | dits[2] = dzl[5]; | |
472 | gMC->Gsvolu("ITS6", "TUBE", idtmed[249], dits, 3); | |
b16d3d87 | 473 | gMC->Gspos("ITS6", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 474 | |
d12d92a5 | 475 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SPD |
33959f40 | 476 | |
d12d92a5 | 477 | gMC->Gsvolu("IEL1", "TUBE", idtmed[208], dits, 0); |
478 | for (i = 0; i < 2; i++) { | |
33959f40 | 479 | dits[0] = rl[i]; |
480 | dits[1] = dits[0] + drb[i]; | |
481 | dits[2] = dzb[i] / 2.; | |
482 | zpos = dzl[i] + dits[2]; | |
d12d92a5 | 483 | gMC->Gsposp("IEL1", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); |
484 | gMC->Gsposp("IEL1", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
33959f40 | 485 | } |
d12d92a5 | 486 | |
487 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SDD | |
488 | ||
489 | gMC->Gsvolu("IEL2", "TUBE", idtmed[237], dits, 0); | |
89909db5 | 490 | for (i = 2; i < 3; i++) { |
491 | dits[0] = rl[i]-2.5; | |
492 | dits[1] = dits[0] + drb[i]; | |
493 | dits[2] = dzb[i] / 2.; | |
494 | zpos = dzl[i] + dits[2]; | |
495 | gMC->Gsposp("IEL2", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
496 | gMC->Gsposp("IEL2", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
497 | } | |
498 | for (i = 3; i < 4; i++) { | |
499 | dits[0] = rl[i]-1.4; | |
d12d92a5 | 500 | dits[1] = dits[0] + drb[i]; |
501 | dits[2] = dzb[i] / 2.; | |
502 | zpos = dzl[i] + dits[2]; | |
503 | gMC->Gsposp("IEL2", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
504 | gMC->Gsposp("IEL2", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
505 | } | |
506 | ||
507 | // END-LADDER ELECTRONICS BOXES AND CABLES FOR SSD | |
508 | ||
509 | gMC->Gsvolu("IEL3", "TUBE", idtmed[263], dits, 0); | |
89909db5 | 510 | for (i = 4; i < 5; i++) { |
511 | dits[0] = rl[i]+1.4; | |
d12d92a5 | 512 | dits[1] = dits[0] + drb[i]; |
513 | dits[2] = dzb[i] / 2.; | |
514 | zpos = dzl[i] + dits[2]; | |
515 | gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
516 | gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
517 | } | |
89909db5 | 518 | for (i = 5; i < 6; i++) { |
519 | dits[0] = rl[i]+0.4235; | |
520 | dits[1] = dits[0] + drb[i]; | |
521 | dits[2] = dzb[i] / 2.; | |
522 | zpos = dzl[i] + dits[2]; | |
523 | gMC->Gsposp("IEL3", i+1, "ITSD", 0., 0., zpos, 0, "ONLY", dits, 3); | |
524 | gMC->Gsposp("IEL3", i+1+6, "ITSD", 0., 0.,-zpos, 0, "ONLY", dits, 3); | |
525 | } | |
146fb996 | 526 | |
6c251614 | 527 | // DEFINE THERMAL SCREEN FOR SPD |
33959f40 | 528 | |
6c251614 | 529 | pcits[0] = 8.3; |
530 | pcits[1] = 8.5; | |
531 | pcits[2] = 42.5; | |
532 | gMC->Gsvolu("ICY1", "TUBE", idtmed[274], pcits, 3); | |
533 | gMC->Gspos("ICY1", 1, "ITSD", 0., 0., 0., 0, "ONLY"); | |
33959f40 | 534 | |
33959f40 | 535 | // DEFINE END CONES FOR SDD |
536 | ||
4ebc1b6a | 537 | pcits[0] = (59.-42.5)/2.; |
538 | pcits[1] = 8.5; | |
89909db5 | 539 | pcits[2] = 8.5+0.1; |
4ebc1b6a | 540 | pcits[3] = 28.; |
89909db5 | 541 | pcits[4] = 28.+0.1; |
9cd18c59 | 542 | gMC->Gsvolu("ICO1", "CONE", idtmed[238], pcits, 5); |
146fb996 | 543 | AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.); |
4ebc1b6a | 544 | gMC->Gspos("ICO1", 1, "ITSD", 0., 0., 42.5+pcits[0], 0, "ONLY"); |
545 | gMC->Gspos("ICO1", 2, "ITSD", 0., 0., -(42.5+pcits[0]), idrotm[200], "ONLY"); | |
6c251614 | 546 | |
547 | // DEFINE CYLINDER BETWEEN SDD AND SSD | |
548 | ||
549 | pcits[0] = (59.5-0.13/2.)/2.; | |
550 | pcits[1] = (59.5+0.13/2.)/2.; | |
551 | pcits[2] = 57.; | |
faec2e21 | 552 | gMC->Gsvolu("ICY2", "TUBE", idtmed[274], pcits, 3); |
146fb996 | 553 | gMC->Gspos("ICY2", 1, "ITSD", 0., 0., 0., 0, "ONLY"); |
33959f40 | 554 | |
555 | // DEFINE END CONES FOR SSD | |
556 | ||
4ebc1b6a | 557 | pcits[0] = (74.-59.)/2.; |
558 | pcits[1] = 28.; | |
89909db5 | 559 | pcits[2] = 28.+0.1; |
4ebc1b6a | 560 | pcits[3] = 47.; |
89909db5 | 561 | pcits[4] = 47.+0.1; |
9cd18c59 | 562 | gMC->Gsvolu("ICO2", "CONE", idtmed[264], pcits, 5); |
4ebc1b6a | 563 | gMC->Gspos("ICO2", 1, "ITSD", 0., 0., 59.+pcits[0], 0, "ONLY"); |
1a366a10 | 564 | gMC->Gspos("ICO2", 2, "ITSD", 0., 0., -(59.+pcits[0]), idrotm[200], "ONLY"); |
e4f08ac3 | 565 | |
1a366a10 | 566 | |
e4f08ac3 | 567 | // **************************** SERVICES ********************************* |
568 | ||
569 | ||
570 | ||
c54243df | 571 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART |
72923d44 | 572 | // UPPER PART |
33959f40 | 573 | |
e4f08ac3 | 574 | dgh[0] = 46.; |
575 | dgh[1] = 46.+1.0; | |
e8031268 | 576 | dgh[2] = 9.5; |
72923d44 | 577 | dgh[3] = 12.; |
578 | dgh[4] = 168.; | |
33959f40 | 579 | |
72923d44 | 580 | if (suppmat == 0) { |
581 | gMC->Gsvolu("I1CU", "TUBS", idtmed[279], dgh, 5); // copper | |
582 | } else if (suppmat == 1) { | |
583 | gMC->Gsvolu("I1CU", "TUBS", idtmed[285], dgh, 5); // aluminum | |
584 | } else { | |
585 | gMC->Gsvolu("I1CU", "TUBS", idtmed[274], dgh, 5); // carbon | |
586 | } | |
587 | gMC->Gspos("I1CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY"); | |
588 | gMC->Gspos("I1CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY"); | |
e6892b92 | 589 | |
72923d44 | 590 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - COPPER PART |
591 | // LOWER PART | |
592 | ||
593 | dgh[0] = 46.; | |
594 | dgh[1] = 46.+1.0; | |
595 | dgh[2] = 9.5; | |
596 | dgh[3] = 192.; | |
597 | dgh[4] = 348.; | |
598 | ||
599 | if (suppmat == 0) { | |
600 | gMC->Gsvolu("I2CU", "TUBS", idtmed[279], dgh, 5); // copper | |
601 | } else if (suppmat == 1) { | |
602 | gMC->Gsvolu("I2CU", "TUBS", idtmed[285], dgh, 5); // aluminum | |
603 | } else { | |
604 | gMC->Gsvolu("I2CU", "TUBS", idtmed[274], dgh, 5); // carbon | |
605 | } | |
606 | gMC->Gspos("I2CU", 1, "ITSV", 0., 0., 83.5, 0, "ONLY"); | |
607 | gMC->Gspos("I2CU", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY"); | |
608 | ||
609 | ||
c54243df | 610 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART |
72923d44 | 611 | // UPPER PART |
e6892b92 | 612 | |
e4f08ac3 | 613 | dgh[0] = 46.+1.0; |
614 | dgh[1] = 46.+1.0+1.5; | |
e8031268 | 615 | dgh[2] = 9.5; |
72923d44 | 616 | dgh[3] = 12.; |
617 | dgh[4] = 168.; | |
e6892b92 | 618 | |
72923d44 | 619 | gMC->Gsvolu("I1CC", "TUBS", idtmed[274], dgh, 5); |
620 | gMC->Gspos("I1CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY"); | |
621 | gMC->Gspos("I1CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY"); | |
33959f40 | 622 | |
72923d44 | 623 | // --- DEFINE CABLES AT THE END OF THE ITS CONES - CARBON PART |
624 | // LOWER PART | |
625 | ||
626 | dgh[0] = 46.+1.0; | |
627 | dgh[1] = 46.+1.0+1.5; | |
628 | dgh[2] = 9.5; | |
629 | dgh[3] = 192.; | |
630 | dgh[4] = 348.; | |
33959f40 | 631 | |
72923d44 | 632 | gMC->Gsvolu("I2CC", "TUBS", idtmed[274], dgh, 5); |
633 | gMC->Gspos("I2CC", 1, "ITSV", 0., 0., 83.5, 0, "ONLY"); | |
634 | gMC->Gspos("I2CC", 2, "ITSV", 0., 0., -83.5, idrotm[200], "ONLY"); | |
635 | ||
636 | // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES | |
637 | // UPPER PART | |
638 | ||
e4f08ac3 | 639 | dgh[0] = 46.; |
33959f40 | 640 | dgh[1] = 56.; |
641 | dgh[2] = 2.25; | |
72923d44 | 642 | dgh[3] = 12.; |
643 | dgh[4] = 168.; | |
33959f40 | 644 | |
72923d44 | 645 | gMC->Gsvolu("IPA1", "TUBS", idtmed[285], dgh, 5); |
646 | gMC->Gspos("IPA1", 1, "ITSV", 0., 0., 95.25, 0, "ONLY"); | |
647 | gMC->Gspos("IPA1", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY"); | |
648 | ||
649 | ||
650 | // --- DEFINE PATCH PANELS AT THE END OF THE ITS CONES | |
651 | // LOWER PART | |
652 | ||
653 | dgh[0] = 46.; | |
654 | dgh[1] = 56.; | |
655 | dgh[2] = 2.25; | |
656 | dgh[3] = 192.; | |
657 | dgh[4] = 348.; | |
33959f40 | 658 | |
72923d44 | 659 | gMC->Gsvolu("IPA2", "TUBS", idtmed[285], dgh, 5); |
660 | gMC->Gspos("IPA2", 1, "ITSV", 0., 0., 95.25, 0, "ONLY"); | |
661 | gMC->Gspos("IPA2", 2, "ITSV", 0., 0., -95.25, idrotm[200], "ONLY"); | |
662 | ||
663 | ||
c54243df | 664 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART |
4ebc1b6a | 665 | // UPPER PART |
666 | ||
e4f08ac3 | 667 | dgh[0] = (ztpc-97.5)/2.; |
668 | dgh[1] = 46.2; | |
669 | dgh[2] = 46.2+1.0; | |
670 | dgh[3] = 62.3; | |
671 | dgh[4] = 62.3+1.0; | |
4ebc1b6a | 672 | dgh[5] = 12.; |
673 | dgh[6] = 168.; | |
72923d44 | 674 | if (suppmat == 0) { |
675 | gMC->Gsvolu("ICU1", "CONS", idtmed[279], dgh, 7); // copper | |
676 | } else if (suppmat == 1) { | |
677 | gMC->Gsvolu("ICU1", "CONS", idtmed[285], dgh, 7); // aluminum | |
678 | } else { | |
679 | gMC->Gsvolu("ICU1", "CONS", idtmed[274], dgh, 7); // carbon | |
680 | } | |
e4f08ac3 | 681 | gMC->Gspos("ICU1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY"); |
33959f40 | 682 | |
4ebc1b6a | 683 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - COPPER PART |
684 | // LOWER PART | |
685 | ||
e4f08ac3 | 686 | dgh[0] = (ztpc-97.5)/2.; |
687 | dgh[1] = 46.2; | |
688 | dgh[2] = 46.2+1.0; | |
689 | dgh[3] = 62.3; | |
690 | dgh[4] = 62.3+1.0; | |
4ebc1b6a | 691 | dgh[5] = 192.; |
692 | dgh[6] = 348.; | |
72923d44 | 693 | if (suppmat == 0) { |
694 | gMC->Gsvolu("ICU2", "CONS", idtmed[279], dgh, 7); // copper | |
695 | } else if (suppmat == 1) { | |
696 | gMC->Gsvolu("ICU2", "CONS", idtmed[285], dgh, 7); // aluminum | |
697 | } else { | |
698 | gMC->Gsvolu("ICU2", "CONS", idtmed[274], dgh, 7); // carbon | |
699 | } | |
e4f08ac3 | 700 | gMC->Gspos("ICU2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY"); |
701 | ||
4ebc1b6a | 702 | |
703 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART | |
704 | // UPPER PART | |
705 | ||
e4f08ac3 | 706 | dgh[0] = (ztpc-97.5)/2.; |
707 | dgh[1] = 46.2+1.0; | |
708 | dgh[2] = 46.2+1.0+1.5; | |
709 | dgh[3] = 62.3+1.0; | |
710 | dgh[4] = 62.3+1.0+1.5; | |
4ebc1b6a | 711 | dgh[5] = 12.; |
712 | dgh[6] = 168.; | |
713 | gMC->Gsvolu("ICC1", "CONS", idtmed[274], dgh, 7); | |
e4f08ac3 | 714 | gMC->Gspos("ICC1", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY"); |
e6892b92 | 715 | |
c54243df | 716 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE ABSORBER SIDE - CARBON PART |
4ebc1b6a | 717 | // LOWER PART |
718 | ||
e4f08ac3 | 719 | dgh[0] = (ztpc-97.5)/2.; |
720 | dgh[1] = 46.2+1.0; | |
45725ec9 | 721 | dgh[2] = 46.2+1.0+1.5; |
e4f08ac3 | 722 | dgh[3] = 62.3+1.0; |
45725ec9 | 723 | dgh[4] = 62.3+1.0+1.5; |
4ebc1b6a | 724 | dgh[5] = 192.; |
725 | dgh[6] = 348.; | |
726 | gMC->Gsvolu("ICC2", "CONS", idtmed[274], dgh, 7); | |
e4f08ac3 | 727 | gMC->Gspos("ICC2", 1, "ITSV", 0., 0., 97.5+dgh[0], 0, "ONLY"); |
4ebc1b6a | 728 | |
c54243df | 729 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART |
4ebc1b6a | 730 | // UPPER PART |
731 | ||
e4f08ac3 | 732 | dgh[0] = 62.1; |
4ebc1b6a | 733 | dgh[1] = 74.5; |
734 | dgh[2] = 0.5; | |
735 | dgh[3] = 12.; | |
736 | dgh[4] = 168.; | |
72923d44 | 737 | if (suppmat == 0) { |
738 | gMC->Gsvolu("ICU3", "TUBS", idtmed[279], dgh, 5); // copper | |
739 | } else if (suppmat == 1) { | |
740 | gMC->Gsvolu("ICU3", "TUBS", idtmed[285], dgh, 5); // aluminum | |
741 | } else { | |
742 | gMC->Gsvolu("ICU3", "TUBS", idtmed[274], dgh, 5); // carbon | |
743 | } | |
e4f08ac3 | 744 | gMC->Gspos("ICU3", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY"); |
4ebc1b6a | 745 | |
746 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - COPPER PART | |
747 | // LOWER PART | |
748 | ||
e4f08ac3 | 749 | dgh[0] = 62.1; |
4ebc1b6a | 750 | dgh[1] = 74.5; |
751 | dgh[2] = 0.5; | |
752 | dgh[3] = 192.; | |
753 | dgh[4] = 348.; | |
72923d44 | 754 | if (suppmat == 0) { |
755 | gMC->Gsvolu("ICU4", "TUBS", idtmed[279], dgh, 5); // copper | |
756 | } else if (suppmat == 1) { | |
757 | gMC->Gsvolu("ICU4", "TUBS", idtmed[285], dgh, 5); // aluminum | |
758 | } else { | |
759 | gMC->Gsvolu("ICU4", "TUBS", idtmed[274], dgh, 5); // carbon | |
760 | } | |
e4f08ac3 | 761 | gMC->Gspos("ICU4", 1, "ITSV", 0., 0., ztpc+1.5+dgh[2], 0, "ONLY"); |
4ebc1b6a | 762 | |
c54243df | 763 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART |
4ebc1b6a | 764 | // UPPER PART |
765 | ||
e4f08ac3 | 766 | dgh[0] = 62.1; |
4ebc1b6a | 767 | dgh[1] = 74.5; |
768 | dgh[2] = 0.75; | |
769 | dgh[3] = 12.; | |
770 | dgh[4] = 168.; | |
771 | gMC->Gsvolu("ICC3", "TUBS", idtmed[274], dgh, 5); | |
e4f08ac3 | 772 | gMC->Gspos("ICC3", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY"); |
4ebc1b6a | 773 | |
774 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON THE ABSORBER SIDE - CARBON PART | |
775 | // LOWER PART | |
776 | ||
e4f08ac3 | 777 | dgh[0] = 62.1; |
4ebc1b6a | 778 | dgh[1] = 74.5; |
779 | dgh[2] = 0.75; | |
780 | dgh[3] = 192.; | |
781 | dgh[4] = 348.; | |
782 | gMC->Gsvolu("ICC4", "TUBS", idtmed[274], dgh, 5); | |
e4f08ac3 | 783 | gMC->Gspos("ICC4", 1, "ITSV", 0., 0., ztpc+dgh[2], 0, "ONLY"); |
33959f40 | 784 | |
c54243df | 785 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
1a7aef02 | 786 | // THE ABSORBER - COPPER PART - UPPER PART |
33959f40 | 787 | |
e4f08ac3 | 788 | dgh[0] = 46.; |
789 | dgh[1] = 46.+1.0; | |
790 | dgh[2] = (ztpc-97.5+1.5)/2.; | |
1a7aef02 | 791 | dgh[3] = 12.; |
792 | dgh[4] = 168.; | |
72923d44 | 793 | if (suppmat == 0) { |
794 | gMC->Gsvolu("ICU5", "TUBS", idtmed[279], dgh, 5); // copper | |
795 | } else if (suppmat == 1) { | |
796 | gMC->Gsvolu("ICU5", "TUBS", idtmed[285], dgh, 5); // aluminum | |
797 | } else { | |
798 | gMC->Gsvolu("ICU5", "TUBS", idtmed[274], dgh, 5); // carbon | |
799 | } | |
e4f08ac3 | 800 | gMC->Gspos("ICU5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
e6892b92 | 801 | |
c54243df | 802 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. |
1a7aef02 | 803 | // THE ABSORBER - COPPER PART - LOWER PART |
804 | ||
e4f08ac3 | 805 | dgh[0] = 46.; |
806 | dgh[1] = 46.+1.0; | |
807 | dgh[2] = (ztpc-97.5+1.5)/2.; | |
1a7aef02 | 808 | dgh[3] = 192.; |
809 | dgh[4] = 348.; | |
72923d44 | 810 | if (suppmat == 0) { |
811 | gMC->Gsvolu("ICU6", "TUBS", idtmed[279], dgh, 5); // copper | |
812 | } else if (suppmat == 1) { | |
813 | gMC->Gsvolu("ICU6", "TUBS", idtmed[285], dgh, 5); // aluminum | |
814 | } else { | |
815 | gMC->Gsvolu("ICU6", "TUBS", idtmed[274], dgh, 5); // carbon | |
816 | } | |
e4f08ac3 | 817 | gMC->Gspos("ICU6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
1a7aef02 | 818 | |
819 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. | |
820 | // THE ABSORBER - CARBON PART - UPPER PART | |
821 | ||
e4f08ac3 | 822 | dgh[0] = 46.+1.0; |
823 | dgh[1] = 46.+1.0+1.5; | |
824 | dgh[2] = (ztpc-97.5)/2.; | |
1a7aef02 | 825 | dgh[3] = 12.; |
826 | dgh[4] = 168.; | |
827 | gMC->Gsvolu("ICC5", "TUBS", idtmed[274], dgh, 5); | |
e4f08ac3 | 828 | gMC->Gspos("ICC5", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
1a7aef02 | 829 | |
830 | // --- DEFINE CABLES/COOLING BELOW THE TPC ON THE OTHER SIDE W.R.T. | |
831 | // THE ABSORBER - CARBON PART - LOWER PART | |
e6892b92 | 832 | |
e4f08ac3 | 833 | dgh[0] = 46.+1.0; |
834 | dgh[1] = 46.+1.0+1.5; | |
835 | dgh[2] = (ztpc-97.5)/2.; | |
1a7aef02 | 836 | dgh[3] = 192.; |
837 | dgh[4] = 348.; | |
838 | gMC->Gsvolu("ICC6", "TUBS", idtmed[274], dgh, 5); | |
e4f08ac3 | 839 | gMC->Gspos("ICC6", 1, "ITSV", 0., 0., -97.5-dgh[2], 0, "ONLY"); |
33959f40 | 840 | |
1a7aef02 | 841 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
842 | // COPPER PART - UPPER PART | |
843 | ||
e4f08ac3 | 844 | dgh[0] = 46.; |
1a7aef02 | 845 | dgh[1] = 74.5; |
846 | dgh[2] = 0.5; | |
847 | dgh[3] = 12.; | |
848 | dgh[4] = 168.; | |
72923d44 | 849 | if (suppmat == 0) { |
850 | gMC->Gsvolu("ICU7", "TUBS", idtmed[279], dgh, 5); // copper | |
851 | } else if (suppmat == 1) { | |
852 | gMC->Gsvolu("ICU7", "TUBS", idtmed[285], dgh, 5); // aluminum | |
853 | } else { | |
854 | gMC->Gsvolu("ICU7", "TUBS", idtmed[274], dgh, 5); // carbon | |
855 | } | |
e4f08ac3 | 856 | gMC->Gspos("ICU7", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY"); |
33959f40 | 857 | |
c54243df | 858 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
1a7aef02 | 859 | // COPPER PART - LOWER PART |
4ebc1b6a | 860 | |
e4f08ac3 | 861 | dgh[0] = 46.; |
4ebc1b6a | 862 | dgh[1] = 74.5; |
863 | dgh[2] = 0.5; | |
1a7aef02 | 864 | dgh[3] = 192.; |
865 | dgh[4] = 348.; | |
72923d44 | 866 | if (suppmat == 0) { |
867 | gMC->Gsvolu("ICU8", "TUBS", idtmed[279], dgh, 5); // copper | |
868 | } else if (suppmat == 1) { | |
869 | gMC->Gsvolu("ICU8", "TUBS", idtmed[285], dgh, 5); // aluminum | |
870 | } else { | |
871 | gMC->Gsvolu("ICU8", "TUBS", idtmed[274], dgh, 5); // carbon | |
872 | } | |
e4f08ac3 | 873 | gMC->Gspos("ICU8", 1, "ITSV", 0., 0., -(ztpc+1.5+dgh[2]), 0, "ONLY"); |
1a7aef02 | 874 | |
875 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER | |
876 | // CARBON PART - UPPER PART | |
33959f40 | 877 | |
e4f08ac3 | 878 | dgh[0] = 46.+1.0; |
1a7aef02 | 879 | dgh[1] = 74.5; |
880 | dgh[2] = 0.75; | |
881 | dgh[3] = 12.; | |
882 | dgh[4] = 168.; | |
883 | gMC->Gsvolu("ICC7", "TUBS", idtmed[274], dgh, 5); | |
e4f08ac3 | 884 | gMC->Gspos("ICC7", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY"); |
e6892b92 | 885 | |
c54243df | 886 | // --- DEFINE CABLES/COOLING BEHIND THE TPC ON OTHER SIDE W.R.T. THE ABSORBER |
1a7aef02 | 887 | // CARBON PART - LOWER PART |
e6892b92 | 888 | |
e4f08ac3 | 889 | dgh[0] = 46.+1.0; |
4ebc1b6a | 890 | dgh[1] = 74.5; |
891 | dgh[2] = 0.75; | |
1a7aef02 | 892 | dgh[3] = 192.; |
893 | dgh[4] = 348.; | |
894 | gMC->Gsvolu("ICC8", "TUBS", idtmed[274], dgh, 5); | |
e4f08ac3 | 895 | gMC->Gspos("ICC8", 1, "ITSV", 0., 0., -(ztpc+dgh[2]), 0, "ONLY"); |
33959f40 | 896 | |
1a7aef02 | 897 | // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - UPPER PART |
898 | ||
899 | dgh[0] = 74.5; | |
900 | dgh[1] = 79.5; | |
901 | dgh[2] = 2.5; | |
902 | dgh[3] = 12.; | |
903 | dgh[4] = 168.; | |
904 | gMC->Gsvolu("IHK1", "TUBS", idtmed[284], dgh, 5); | |
e4f08ac3 | 905 | gMC->Gspos("IHK1", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY"); |
1a7aef02 | 906 | |
907 | // --- DEFINE HOOK TO THE TPC ON OTHER SIDE W.R.T. THE ABSORBER - LOWER PART | |
33959f40 | 908 | |
909 | dgh[0] = 74.5; | |
910 | dgh[1] = 79.5; | |
911 | dgh[2] = 2.5; | |
1a7aef02 | 912 | dgh[3] = 192.; |
913 | dgh[4] = 348.; | |
914 | gMC->Gsvolu("IHK2", "TUBS", idtmed[284], dgh, 5); | |
e4f08ac3 | 915 | gMC->Gspos("IHK2", 1, "ITSV", 0., 0., -ztpc-dgh[2], 0, "ONLY"); |
33959f40 | 916 | |
c54243df | 917 | // --- DEFINE RAILS BETWEEN THE ITS AND THE TPC |
918 | ||
e4f08ac3 | 919 | if (rails == 1) { |
920 | ||
921 | dgh[0] = 2.; | |
922 | dgh[1] = 8.; | |
923 | dgh[2] = 190.; | |
31683195 | 924 | gMC->Gsvolu("IRA1", "BOX ", idtmed[239], dgh, 3); |
e4f08ac3 | 925 | gMC->Gspos("IRA1", 1, "ITSV", 53.5, 0., -69.5, 0, "ONLY"); |
31683195 | 926 | gMC->Gsvolu("IRA2", "BOX ", idtmed[239], dgh, 3); |
e4f08ac3 | 927 | gMC->Gspos("IRA2", 1, "ITSV", -53.5, 0., -69.5, 0, "ONLY"); |
928 | ||
31683195 | 929 | dgh[0] = 2.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2 |
930 | dgh[1] = 8.-0.5; // 0.5 was determined in such a way that the aluminum area is 20.9 cm^2 | |
e4f08ac3 | 931 | dgh[2] = 190.; |
932 | gMC->Gsvolu("IRA3", "BOX ", idtmed[275], dgh, 3); | |
933 | gMC->Gspos("IRA3", 1, "IRA1", 0., 0., 0., 0, "ONLY"); | |
934 | gMC->Gsvolu("IRA4", "BOX ", idtmed[275], dgh, 3); | |
935 | gMC->Gspos("IRA4", 1, "IRA2", 0., 0., 0., 0, "ONLY"); | |
936 | ||
937 | } | |
c54243df | 938 | |
4ebc1b6a | 939 | // --- DEFINE CYLINDERS HOLDING RAILS BETWEEN THE ITS AND THE TPC |
940 | ||
e4f08ac3 | 941 | dgh[0] = 56.9; |
4ebc1b6a | 942 | dgh[1] = 59.; |
89909db5 | 943 | dgh[2] = 0.6; |
4ebc1b6a | 944 | gMC->Gsvolu("ICYL", "TUBE", idtmed[285], dgh, 3); |
27c5763c | 945 | gMC->Gspos("ICYL", 1, "ALIC", 0., 0., 74.1, 0, "ONLY"); |
946 | gMC->Gspos("ICYL", 2, "ALIC", 0., 0., -74.1, idrotm[200], "ONLY"); | |
e4f08ac3 | 947 | |
948 | // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE CYLINDERS | |
949 | ||
950 | dgh[0] = 0.; | |
951 | dgh[1] = 3.; | |
952 | dgh[2] = 5.; // 5. comes from the fact that the volume has to be 567.6/2 cm^3 | |
953 | gMC->Gsvolu("ISR1", "TUBE", idtmed[286], dgh, 3); | |
c2685204 | 954 | gMC->Gspos("ISR1", 1, "ITSV", 53.4292, 10.7053, 79.75, 0, "ONLY"); |
955 | gMC->Gspos("ISR1", 2, "ITSV", 53.4292, -10.7053, 79.75, 0, "ONLY"); | |
956 | gMC->Gspos("ISR1", 3, "ITSV", -53.4292, 10.7053, 79.75, 0, "ONLY"); | |
957 | gMC->Gspos("ISR1", 4, "ITSV", -53.4292, -10.7053, 79.75, 0, "ONLY"); | |
958 | gMC->Gspos("ISR1", 5, "ITSV", 53.4292, 10.7053, -79.75, 0, "ONLY"); | |
959 | gMC->Gspos("ISR1", 6, "ITSV", 53.4292, -10.7053, -79.75, 0, "ONLY"); | |
960 | gMC->Gspos("ISR1", 7, "ITSV", -53.4292, 10.7053, -79.75, 0, "ONLY"); | |
961 | gMC->Gspos("ISR1", 8, "ITSV", -53.4292, -10.7053, -79.75, 0, "ONLY"); | |
e4f08ac3 | 962 | |
963 | // --- DEFINE SUPPORTS FOR RAILS ATTACHED TO THE ABSORBER | |
964 | ||
965 | dgh[0] = 5.; | |
966 | dgh[1] = 12.; | |
967 | dgh[2] = 5.; | |
968 | gMC->Gsvolu("ISR2", "BOX ", idtmed[285], dgh, 3); | |
969 | gMC->Gspos("ISR2", 1, "ALIC", 53.5, 0., 125.5, 0, "ONLY"); | |
970 | gMC->Gsvolu("ISR3", "BOX ", idtmed[285], dgh, 3); | |
971 | gMC->Gspos("ISR3", 1, "ALIC", -53.5, 0., 125.5, 0, "ONLY"); | |
972 | ||
973 | dgh[0] = 5.-2.; | |
974 | dgh[1] = 12.-2.; | |
975 | dgh[2] = 5.; | |
976 | gMC->Gsvolu("ISR4", "BOX ", idtmed[275], dgh, 3); | |
977 | gMC->Gspos("ISR4", 1, "ISR2", 0., 0., 0., 0, "ONLY"); | |
978 | gMC->Gsvolu("ISR5", "BOX ", idtmed[275], dgh, 3); | |
979 | gMC->Gspos("ISR5", 1, "ISR3", 0., 0., 0., 0, "ONLY"); | |
980 | ||
981 | // --- DEFINE SUPPORTS TO ATTACH THE ITS TO THE TPC | |
982 | ||
983 | dgh[0] = 0.; | |
984 | dgh[1] = 5.; | |
985 | dgh[2] = 2.; | |
986 | gMC->Gsvolu("ISR6", "TUBE", idtmed[285], dgh, 3); | |
987 | gMC->Gspos("ISR6", 1, "ALIC", 0., 54., 77., 0, "ONLY"); | |
988 | gMC->Gspos("ISR6", 2, "ALIC", 0., 54., -77., 0, "ONLY"); | |
989 | gMC->Gspos("ISR6", 3, "ALIC", 0., -54., -77., 0, "ONLY"); | |
990 | ||
991 | ||
33959f40 | 992 | // --- Outputs the geometry tree in the EUCLID/CAD format |
993 | ||
994 | if (fEuclidOut) { | |
995 | gMC->WriteEuclid("ITSgeometry", "ITSV", 1, 5); | |
996 | } | |
997 | } | |
998 | //_____________________________________________________________________________ | |
999 | void AliITSvPPRcoarseasymm::CreateMaterials(){ | |
1000 | //////////////////////////////////////////////////////////////////////// | |
1001 | // | |
1002 | // Create ITS materials | |
1003 | // This function defines the default materials used in the Geant | |
1004 | // Monte Carlo simulations for the geometries AliITSv1, AliITSv3, | |
1005 | // AliITSvPPRcoarseasymm. | |
1006 | // In general it is automatically replaced by | |
1007 | // the CreatMaterials routine defined in AliITSv?. Should the function | |
1008 | // CreateMaterials not exist for the geometry version you are using this | |
1009 | // one is used. See the definition found in AliITSv5 or the other routine | |
1010 | // for a complete definition. | |
1011 | // | |
1012 | // Water H2O | |
1013 | Float_t awat[2] = { 1.00794,15.9994 }; | |
1014 | Float_t zwat[2] = { 1.,8. }; | |
1015 | Float_t wwat[2] = { 2.,1. }; | |
1016 | Float_t denswat = 1.; | |
1017 | // Freon | |
1018 | Float_t afre[2] = { 12.011,18.9984032 }; | |
1019 | Float_t zfre[2] = { 6.,9. }; | |
1020 | Float_t wfre[2] = { 5.,12. }; | |
1021 | Float_t densfre = 1.5; | |
1022 | // Ceramics | |
1023 | // 94.4% Al2O3 , 2.8% SiO2 , 2.3% MnO , 0.5% Cr2O3 | |
1024 | Float_t acer[5] = { 26.981539,15.9994,28.0855,54.93805,51.9961 }; | |
1025 | Float_t zcer[5] = { 13.,8.,14.,25., 24. }; | |
1026 | Float_t wcer[5] = { .49976,1.01233,.01307, .01782,.00342 }; | |
1027 | Float_t denscer = 3.6; | |
1028 | // | |
1029 | // 60% SiO2 , 40% G10FR4 | |
1030 | // PC board | |
1031 | Float_t apcb[3] = { 28.0855,15.9994,17.749 }; | |
1032 | Float_t zpcb[3] = { 14.,8.,8.875 }; | |
1033 | Float_t wpcb[3] = { .28,.32,.4 }; | |
1034 | Float_t denspcb = 1.8; | |
1035 | // POLYETHYL | |
1036 | Float_t apoly[2] = { 12.01,1. }; | |
1037 | Float_t zpoly[2] = { 6.,1. }; | |
1038 | Float_t wpoly[2] = { .33,.67 }; | |
d12d92a5 | 1039 | // old SERVICES |
33959f40 | 1040 | Float_t zserv[4] = { 1.,6.,26.,29. }; |
1041 | Float_t aserv[4] = { 1.,12.,55.8,63.5 }; | |
1042 | Float_t wserv[4] = { .014,.086,.42,.48 }; | |
d12d92a5 | 1043 | // Stainless steel |
1044 | Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 }; | |
1045 | Float_t zsteel[4] = { 26.,24.,28.,14. }; | |
1046 | Float_t wsteel[4] = { .715,.18,.1,.005 }; | |
1047 | ||
33959f40 | 1048 | |
1049 | Int_t isxfld = gAlice->Field()->Integ(); | |
1050 | Float_t sxmgmx = gAlice->Field()->Max(); | |
1051 | ||
1052 | ||
1053 | // --- Define the various materials for GEANT --- | |
1054 | ||
1055 | // 200-224 --> Silicon Pixel Detectors (detectors, chips, buses, cooling,..) | |
1056 | ||
e4f08ac3 | 1057 | AliMaterial(0, "SPD Si$", 28.0855, 14., 2.33, 9.36, 999.); |
1058 | AliMaterial(1, "SPD Si chip$", 28.0855, 14., 2.33, 9.36, 999.); | |
1059 | AliMaterial(2, "SPD Si bus$", 28.0855, 14., 2.33, 9.36, 999.); | |
1060 | AliMaterial(3, "SPD C$", 12.011, 6., 2.265,18.8, 999.); | |
33959f40 | 1061 | // v. dens |
e4f08ac3 | 1062 | AliMaterial(4, "SPD Air$", 14.61, 7.3, .001205, 30423., 999.); |
33959f40 | 1063 | AliMaterial(5, "SPD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); |
e4f08ac3 | 1064 | AliMaterial(6, "SPD Al$", 26.981539, 13., 2.6989, 8.9, 999.); |
33959f40 | 1065 | AliMixture( 7, "SPD Water $", awat, zwat, denswat, -2, wwat); |
1066 | AliMixture( 8, "SPD Freon$", afre, zfre, densfre, -2, wfre); | |
e4f08ac3 | 1067 | AliMaterial(9, "SPD End ladder$", 55.845, 26., 7.87/10., 1.76*10., 999.); |
1068 | //AliMaterial(9, "SPD End ladder$", 55.845, 26., -7.87/10., -1.76*10., 999.); | |
1069 | AliMaterial(10, "SPD cone$",28.0855, 14., 2.33, 9.36, 999.); // check !!!! | |
33959f40 | 1070 | // ** |
faec2e21 | 1071 | AliMedium(0, "SPD Si$", 0, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
1072 | AliMedium(1, "SPD Si chip$", 1, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1073 | AliMedium(2, "SPD Si bus$", 2, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1074 | AliMedium(3, "SPD C$", 3, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1075 | AliMedium(4, "SPD Air$", 4, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1076 | AliMedium(5, "SPD Vacuum$", 5, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
1077 | AliMedium(6, "SPD Al$", 6, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1078 | AliMedium(7, "SPD Water $", 7, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1079 | AliMedium(8, "SPD Freon$", 8, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1080 | AliMedium(9, "SPD End ladder$",9, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1081 | AliMedium(10, "SPD cone$", 10, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
33959f40 | 1082 | |
1083 | // 225-249 --> Silicon Drift Detectors (detectors, chips, buses, cooling,..) | |
1084 | ||
e4f08ac3 | 1085 | AliMaterial(25, "SDD Si$", 28.0855, 14., 2.33, 9.36, 999.); |
1086 | AliMaterial(26, "SDD Si chip$", 28.0855, 14., 2.33, 9.36, 999.); | |
1087 | AliMaterial(27, "SDD Si bus$", 28.0855, 14., 2.33, 9.36, 999.); | |
1088 | AliMaterial(28, "SDD C$", 12.011, 6., 2.265,18.8, 999.); | |
33959f40 | 1089 | // v. dens |
e4f08ac3 | 1090 | AliMaterial(29, "SDD Air$", 14.61, 7.3, .001205, 30423., 999.); |
33959f40 | 1091 | AliMaterial(30, "SDD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); |
e4f08ac3 | 1092 | AliMaterial(31, "SDD Al$", 26.981539, 13., 2.6989, 8.9, 999.); |
33959f40 | 1093 | // After a call with ratios by number (negative number of elements), |
1094 | // the ratio array is changed to the ratio by weight, so all successive | |
1095 | // calls with the same array must specify the number of elements as | |
1096 | // positive | |
1097 | AliMixture(32, "SDD Water $", awat, zwat, denswat, 2, wwat); | |
1098 | // After a call with ratios by number (negative number of elements), | |
1099 | // the ratio array is changed to the ratio by weight, so all successive | |
1100 | // calls with the same array must specify the number of elements as | |
1101 | // positive | |
1102 | AliMixture( 33, "SDD Freon$", afre, zfre, densfre, 2, wfre); | |
1103 | AliMixture( 34, "SDD PCB$", apcb, zpcb, denspcb, 3, wpcb); | |
e4f08ac3 | 1104 | AliMaterial(35, "SDD Copper$", 63.546, 29., 8.96, 1.43, 999.); |
33959f40 | 1105 | AliMixture( 36, "SDD Ceramics$", acer, zcer, denscer, -5, wcer); |
e4f08ac3 | 1106 | AliMaterial(37, "SDD Kapton$", 12.011, 6., 1.3, 31.27, 999.); |
1107 | AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, 0.3824, 36.5103, 999.); | |
31683195 | 1108 | AliMaterial(39, "SDD cone$",63.546, 29., 1.15, 1.265, 999.); |
1109 | AliMaterial(40, "SDD M55J$",12.3565, 6.4561, 1.8097, 22.9570, 999.); | |
e4f08ac3 | 1110 | //AliMaterial(38, "SDD End ladder$", 69.9298, 29.8246, -0.3824, -36.5103, 999.); |
1111 | //AliMaterial(39, "SDD cone$",63.546, 29., -1.15, -1.265, 999.); | |
89909db5 | 1112 | |
33959f40 | 1113 | // ** |
1114 | // check A and Z | |
faec2e21 | 1115 | AliMedium(25, "SDD Si$", 25, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
1116 | AliMedium(26, "SDD Si chip$", 26, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1117 | AliMedium(27, "SDD Si bus$", 27, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1118 | AliMedium(28, "SDD C$", 28, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1119 | AliMedium(29, "SDD Air$", 29, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1120 | AliMedium(30, "SDD Vacuum$", 30, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
1121 | AliMedium(31, "SDD Al$", 31, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1122 | AliMedium(32, "SDD Water $", 32, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1123 | AliMedium(33, "SDD Freon$", 33, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1124 | AliMedium(34, "SDD PCB$", 34, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1125 | AliMedium(35, "SDD Copper$", 35, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1126 | AliMedium(36, "SDD Ceramics$", 36, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1127 | AliMedium(37, "SDD Kapton$", 37, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1128 | AliMedium(38, "SDD End ladder$",38, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1129 | AliMedium(39, "SDD cone$", 39, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
31683195 | 1130 | AliMedium(40, "SDD M55J$", 40, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
33959f40 | 1131 | // 250-274 --> Silicon Strip Detectors (detectors, chips, buses, cooling,..) |
1132 | ||
1133 | AliMaterial(50, "SSD Si$", 28.0855, 14., 2.33, 9.36, 999.); | |
1134 | AliMaterial(51, "SSD Si chip$", 28.0855, 14., 2.33, 9.36, 999.); | |
1135 | AliMaterial(52, "SSD Si bus$", 28.0855, 14., 2.33, 9.36, 999.); | |
1136 | AliMaterial(53, "SSD C$", 12.011, 6., 2.265,18.8, 999.); | |
1137 | // v. dens | |
e4f08ac3 | 1138 | AliMaterial(54, "SSD Air$", 14.61, 7.3, .001205, 30423., 999.); |
33959f40 | 1139 | AliMaterial(55, "SSD Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); |
e4f08ac3 | 1140 | AliMaterial(56, "SSD Al$", 26.981539, 13., 2.6989, 8.9, 999.); |
33959f40 | 1141 | // After a call with ratios by number (negative number of elements), |
1142 | // the ratio array is changed to the ratio by weight, so all successive | |
1143 | // calls with the same array must specify the number of elements as | |
1144 | // positive | |
1145 | AliMixture(57, "SSD Water $", awat, zwat, denswat, 2, wwat); | |
1146 | // After a call with ratios by number (negative number of elements), | |
1147 | // the ratio array is changed to the ratio by weight, so all successive | |
1148 | // calls with the same array must specify the number of elements as | |
1149 | // positive | |
1150 | AliMixture(58, "SSD Freon$", afre, zfre, densfre, 2, wfre); | |
1151 | AliMixture(59, "SSD PCB$", apcb, zpcb, denspcb, 3, wpcb); | |
1152 | AliMaterial(60, "SSD Copper$", 63.546, 29., 8.96, 1.43, 999.); | |
1153 | // After a call with ratios by number (negative number of elements), | |
1154 | // the ratio array is changed to the ratio by weight, so all successive | |
1155 | // calls with the same array must specify the number of elements as | |
1156 | // positive | |
e4f08ac3 | 1157 | AliMixture(61, "SSD Ceramics$", acer, zcer, denscer, 5, wcer); |
33959f40 | 1158 | AliMaterial(62, "SSD Kapton$", 12.011, 6., 1.3, 31.27, 999.); |
1159 | // check A and Z | |
d12d92a5 | 1160 | AliMaterial(63, "SSD G10FR4$", 17.749, 8.875, 1.8, 21.822, 999.); |
e4f08ac3 | 1161 | AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, 0.68, 35.3238, 999.); |
1162 | AliMaterial(65, "SSD cone$",63.546, 29., 1.15, 1.265, 999.); | |
1163 | //AliMaterial(64, "SSD End ladder$", 32.0988, 15.4021, -0.68, -35.3238, 999.); | |
1164 | //AliMaterial(65, "SSD cone$",63.546, 29., -1.15, -1.265, 999.); | |
33959f40 | 1165 | // ** |
faec2e21 | 1166 | AliMedium(50, "SSD Si$", 50, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
1167 | AliMedium(51, "SSD Si chip$", 51, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1168 | AliMedium(52, "SSD Si bus$", 52, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1169 | AliMedium(53, "SSD C$", 53, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1170 | AliMedium(54, "SSD Air$", 54, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1171 | AliMedium(55, "SSD Vacuum$", 55, 0,isxfld,sxmgmx, 10.,1.00, .1, .100,10.00); | |
1172 | AliMedium(56, "SSD Al$", 56, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1173 | AliMedium(57, "SSD Water $", 57, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1174 | AliMedium(58, "SSD Freon$", 58, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1175 | AliMedium(59, "SSD PCB$", 59, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1176 | AliMedium(60, "SSD Copper$", 60, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1177 | AliMedium(61, "SSD Ceramics$", 61, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1178 | AliMedium(62, "SSD Kapton$", 62, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1179 | AliMedium(63, "SSD G10FR4$", 63, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1180 | AliMedium(64, "SSD End ladder$",64, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1181 | AliMedium(65, "SSD cone$", 65, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1182 | ||
33959f40 | 1183 | // 275-299 --> General (end-caps, frames, cooling, cables, etc.) |
1184 | ||
1185 | AliMaterial(75, "GEN C$", 12.011, 6., 2.265, 18.8, 999.); | |
1186 | // verify density | |
e4f08ac3 | 1187 | AliMaterial(76, "GEN Air$", 14.61, 7.3, .001205, 30423., 999.); |
33959f40 | 1188 | AliMaterial(77, "GEN Vacuum$", 1e-16, 1e-16, 1e-16, 1e16, 1e16); |
1189 | AliMixture( 78, "GEN POLYETHYL$", apoly, zpoly, .95, -2, wpoly); | |
1190 | AliMixture( 79, "GEN SERVICES$", aserv, zserv, 4.68, 4, wserv); | |
1191 | AliMaterial(80, "GEN Copper$", 63.546, 29., 8.96, 1.43, 999.); | |
1192 | // After a call with ratios by number (negative number of elements), | |
1193 | // the ratio array is changed to the ratio by weight, so all successive | |
1194 | // calls with the same array must specify the number of elements as | |
1195 | // positive | |
1196 | AliMixture(81, "GEN Water $", awat, zwat, denswat, 2, wwat); | |
e6892b92 | 1197 | // AliMaterial(82, "GEN Cables$", 12.011, 6., 2.265, 18.8, 999.); // check !!! |
1198 | // AliMaterial(83, "GEN patch pan$", 12.011, 6., 2.265, 18.8, 999.); // check !!! | |
1199 | // AliMaterial(84, "GEN serv$", 12.011, 6., 2.265, 18.8, 999.); // check !!! | |
d12d92a5 | 1200 | AliMixture(85, "GEN Inox$", asteel, zsteel, 7.88, 4, wsteel); |
e4f08ac3 | 1201 | AliMaterial(86, "GEN Al$", 26.981539, 13., 2.6989, 8.9, 999.); |
1202 | AliMaterial(87,"inox/alum$", 32.1502,15.3383,3.0705,6.9197,999.); | |
33959f40 | 1203 | // ** |
1204 | AliMedium(75,"GEN C$", 75, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1205 | AliMedium(76,"GEN Air$", 76, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1206 | AliMedium(77,"GEN Vacuum$", 77, 0,isxfld,sxmgmx, 10., .10, .1, .100,10.00); | |
1207 | AliMedium(78,"GEN POLYETHYL$",78, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1208 | AliMedium(79,"GEN SERVICES$", 79, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1209 | AliMedium(80,"GEN Copper$", 80, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1210 | AliMedium(81,"GEN Water $", 81, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
e6892b92 | 1211 | // AliMedium(82,"GEN Cables$", 82, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
1212 | // AliMedium(83,"GEN patch pan$",83, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
1213 | // AliMedium(84,"GEN serv$", 84, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); | |
d12d92a5 | 1214 | AliMedium(85,"GEN Inox$", 85, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
e6892b92 | 1215 | AliMedium(86, "GEN Al$", 86, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
e4f08ac3 | 1216 | AliMedium(87,"inox/alum$", 87, 0,isxfld,sxmgmx, 10., .01, .1, .003, .003); |
1217 | ||
33959f40 | 1218 | } |
1219 | //_____________________________________________________________________________ | |
1220 | void AliITSvPPRcoarseasymm::Init(){ | |
1221 | //////////////////////////////////////////////////////////////////////// | |
1222 | // Initialise the ITS after it has been created. | |
1223 | //////////////////////////////////////////////////////////////////////// | |
bae7e562 | 1224 | Int_t i; |
33959f40 | 1225 | |
bae7e562 | 1226 | cout << endl; |
1227 | for(i=0;i<24;i++) cout << "*";cout << " ITSvPPRcoarseasymm_Init "; | |
1228 | for(i=0;i<25;i++) cout << "*";cout << endl; | |
1229 | // | |
33959f40 | 1230 | AliITS::Init(); |
bae7e562 | 1231 | // |
1232 | for(i=0;i<72;i++) cout << "*"; | |
1233 | cout << endl; | |
33959f40 | 1234 | } |
1235 | ||
1236 | //_____________________________________________________________________________ | |
1237 | void AliITSvPPRcoarseasymm::DrawModule(){ | |
1238 | //////////////////////////////////////////////////////////////////////// | |
1239 | // Draw a shaded view of the FMD version 6. | |
1240 | //////////////////////////////////////////////////////////////////////// | |
1241 | ||
1242 | // Set everything unseen | |
1243 | gMC->Gsatt("*", "seen", -1); | |
1244 | // | |
1245 | // Set ALIC mother visible | |
1246 | gMC->Gsatt("ALIC","SEEN",0); | |
1247 | // | |
1248 | // Set the volumes visible | |
1249 | gMC->Gsatt("ITSD","SEEN",0); | |
1250 | gMC->Gsatt("ITS1","SEEN",1); | |
1251 | gMC->Gsatt("ITS2","SEEN",1); | |
1252 | gMC->Gsatt("ITS3","SEEN",1); | |
1253 | gMC->Gsatt("ITS4","SEEN",1); | |
1254 | gMC->Gsatt("ITS5","SEEN",1); | |
1255 | gMC->Gsatt("ITS6","SEEN",1); | |
1256 | ||
1257 | gMC->Gsatt("IPCB","SEEN",1); | |
1258 | gMC->Gsatt("ICO2","SEEN",1); | |
1259 | gMC->Gsatt("ICER","SEEN",0); | |
1260 | gMC->Gsatt("ISI2","SEEN",0); | |
1261 | gMC->Gsatt("IPLA","SEEN",0); | |
1262 | gMC->Gsatt("ICO3","SEEN",0); | |
1263 | gMC->Gsatt("IEPX","SEEN",0); | |
1264 | gMC->Gsatt("ISI3","SEEN",1); | |
1265 | gMC->Gsatt("ISUP","SEEN",0); | |
1266 | gMC->Gsatt("ICHO","SEEN",0); | |
1267 | gMC->Gsatt("ICMO","SEEN",0); | |
1268 | gMC->Gsatt("ICMD","SEEN",0); | |
1269 | gMC->Gsatt("ICCO","SEEN",1); | |
1270 | gMC->Gsatt("ICCM","SEEN",0); | |
1271 | gMC->Gsatt("ITMD","SEEN",0); | |
1272 | gMC->Gsatt("ITTT","SEEN",1); | |
1273 | ||
1274 | // | |
1275 | gMC->Gdopt("hide", "on"); | |
1276 | gMC->Gdopt("shad", "on"); | |
1277 | gMC->Gsatt("*", "fill", 7); | |
1278 | gMC->SetClipBox("."); | |
1279 | gMC->SetClipBox("*", 0, 300, -300, 300, -300, 300); | |
1280 | gMC->DefaultRange(); | |
1281 | gMC->Gdraw("alic", 40, 30, 0, 11, 10, .07, .07); | |
1282 | gMC->Gdhead(1111, "Inner Tracking System Version 1"); | |
1283 | gMC->Gdman(17, 6, "MAN"); | |
1284 | } | |
1285 | //_____________________________________________________________________________ | |
1286 | void AliITSvPPRcoarseasymm::StepManager(){ | |
1287 | //////////////////////////////////////////////////////////////////////// | |
1288 | // Called for every step in the ITS, then calls the AliITShit class | |
1289 | // creator with the information to be recoreded about that hit. | |
1290 | //////////////////////////////////////////////////////////////////////// | |
b16d3d87 | 1291 | |
1292 | /* | |
33959f40 | 1293 | Int_t copy, id; |
1294 | Float_t hits[8]; | |
1295 | Int_t vol[4]; | |
1296 | TLorentzVector position, momentum; | |
1297 | // TClonesArray &lhits = *fHits; | |
1298 | // | |
1299 | // no hits for this coarse asymmetric version. | |
1300 | // | |
1301 | ||
1302 | // | |
1303 | // Track status | |
1304 | vol[3] = 0; | |
1305 | if(gMC->IsTrackInside()) vol[3] += 1; | |
1306 | if(gMC->IsTrackEntering()) vol[3] += 2; | |
1307 | if(gMC->IsTrackExiting()) vol[3] += 4; | |
1308 | if(gMC->IsTrackOut()) vol[3] += 8; | |
1309 | if(gMC->IsTrackDisappeared()) vol[3] += 16; | |
1310 | if(gMC->IsTrackStop()) vol[3] += 32; | |
1311 | if(gMC->IsTrackAlive()) vol[3] += 64; | |
1312 | // | |
1313 | // Fill hit structure. | |
1314 | if( !(gMC->TrackCharge()) ) return; | |
1315 | // | |
1316 | // Only entering charged tracks | |
1317 | if((id=gMC->CurrentVolID(copy))==fIdSens[0]) { | |
1318 | vol[0]=1; | |
1319 | id=gMC->CurrentVolOffID(1,copy); | |
1320 | vol[1]=copy; | |
1321 | id=gMC->CurrentVolOffID(2,copy); | |
1322 | vol[2]=copy; | |
1323 | } else if(id==fIdSens[1]) { | |
1324 | vol[0]=2; | |
1325 | id=gMC->CurrentVolOffID(1,copy); | |
1326 | vol[1]=copy; | |
1327 | id=gMC->CurrentVolOffID(2,copy); | |
1328 | vol[2]=copy; | |
1329 | } else if(id==fIdSens[2]) { | |
1330 | vol[0]=3; | |
1331 | vol[1]=copy; | |
1332 | id=gMC->CurrentVolOffID(1,copy); | |
1333 | vol[2]=copy; | |
1334 | } else if(id==fIdSens[3]) { | |
1335 | vol[0]=4; | |
1336 | vol[1]=copy; | |
1337 | id=gMC->CurrentVolOffID(1,copy); | |
1338 | vol[2]=copy; | |
1339 | } else if(id==fIdSens[4]) { | |
1340 | vol[0]=5; | |
1341 | vol[1]=copy; | |
1342 | id=gMC->CurrentVolOffID(1,copy); | |
1343 | vol[2]=copy; | |
1344 | } else if(id==fIdSens[5]) { | |
1345 | vol[0]=6; | |
1346 | vol[1]=copy; | |
1347 | id=gMC->CurrentVolOffID(1,copy); | |
1348 | vol[2]=copy; | |
1349 | } else return; | |
1350 | gMC->TrackPosition(position); | |
1351 | gMC->TrackMomentum(momentum); | |
1352 | hits[0]=position[0]; | |
1353 | hits[1]=position[1]; | |
1354 | hits[2]=position[2]; | |
1355 | hits[3]=momentum[0]; | |
1356 | hits[4]=momentum[1]; | |
1357 | hits[5]=momentum[2]; | |
1358 | hits[6]=gMC->Edep(); | |
1359 | hits[7]=gMC->TrackTime(); | |
1360 | // new(lhits[fNhits++]) AliITShit(fIshunt,gAlice->CurrentTrack(),vol,hits); | |
1361 | // | |
1362 | // no hits for this coarse asymmetric version. | |
1363 | // | |
b16d3d87 | 1364 | */ |
33959f40 | 1365 | } |
33959f40 | 1366 |