| e118b27e |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| d1cd2474 |
16 | // $Id$ |
| 17 | // |
| 18 | // Class AliMUONSlatGeometryBuilder |
| 19 | // ------------------------------- |
| 20 | // Abstract base class for geometry construction per chamber. |
| 21 | // |
| f4a7360f |
22 | |
| 2057e0cc |
23 | |
| 24 | |
| c10e6eaf |
25 | // This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves |
| 26 | // of the slats on the support panels. |
| 27 | // Those moves can be described with a simple set of parameters. The next step should be now to describe all |
| 28 | // the slats and their places by a unique |
| 29 | // class, which would make the SlatBuilder far more compact since now only three parameters can define a slat |
| 30 | // and its position, like: |
| 2057e0cc |
31 | // * Bool_t rounded_shape_slat |
| 32 | // * Float_t slat_length |
| 33 | // * Float_t slat_number or Float_t slat_position |
| 34 | |
| d1cd2474 |
35 | #include <TVirtualMC.h> |
| d1cd2474 |
36 | #include <TGeoMatrix.h> |
| 30178c30 |
37 | #include <Riostream.h> |
| d1cd2474 |
38 | |
| e118b27e |
39 | #include "AliRun.h" |
| 40 | #include "AliLog.h" |
| 41 | |
| d1cd2474 |
42 | #include "AliMUONSlatGeometryBuilder.h" |
| 43 | #include "AliMUON.h" |
| b7ef3c96 |
44 | #include "AliMUONConstants.h" |
| e118b27e |
45 | #include "AliMUONGeometryModule.h" |
| a432117a |
46 | #include "AliMUONGeometryEnvelopeStore.h" |
| e516b01d |
47 | #include "AliMUONConstants.h" |
| d1cd2474 |
48 | |
| 5398f946 |
49 | /// \cond CLASSIMP |
| d1cd2474 |
50 | ClassImp(AliMUONSlatGeometryBuilder) |
| 5398f946 |
51 | /// \endcond |
| d1cd2474 |
52 | |
| 53 | //______________________________________________________________________________ |
| 54 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon) |
| b7ef3c96 |
55 | : AliMUONVGeometryBuilder(4, 5, 6, 7, 8, 9), |
| d1cd2474 |
56 | fMUON(muon) |
| 57 | { |
| 58 | // Standard constructor |
| 59 | |
| 60 | } |
| 61 | |
| 62 | //______________________________________________________________________________ |
| 63 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder() |
| 64 | : AliMUONVGeometryBuilder(), |
| 65 | fMUON(0) |
| 66 | { |
| 67 | // Default constructor |
| 68 | } |
| 69 | |
| d1cd2474 |
70 | //______________________________________________________________________________ |
| 71 | AliMUONSlatGeometryBuilder::~AliMUONSlatGeometryBuilder() { |
| 72 | // |
| 73 | } |
| 74 | |
| d1cd2474 |
75 | // |
| 76 | // public methods |
| 77 | // |
| 78 | |
| 79 | //______________________________________________________________________________ |
| 80 | void AliMUONSlatGeometryBuilder::CreateGeometry() |
| 81 | { |
| e516b01d |
82 | // CreateGeometry is the method containing all the informations concerning Stations 345 geometry. |
| 83 | // It includes description and placements of support panels and slats. |
| 84 | // The code comes directly from what was written in AliMUONv1.cxx before, with modifications concerning |
| 85 | // the use of Enveloppe method to place the Geant volumes. |
| 86 | // Now, few changes would allow the creation of a Slat methode where slat could be described by few parameters, |
| 87 | // and this builder would then be dedicated only to the |
| 88 | // placements of the slats. Those modifications could shorten the Station 345 geometry by a non-negligeable factor... |
| d1cd2474 |
89 | |
| e516b01d |
90 | Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099; |
| 91 | |
| 92 | Float_t angle; |
| 93 | Float_t *dum=0; |
| 94 | |
| 95 | // define the id of tracking media: |
| 96 | Int_t idAir = idtmed[1100]; // medium 1 |
| 97 | Int_t idGas = idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%) |
| 98 | Int_t idCopper = idtmed[1110]; |
| 99 | Int_t idG10 = idtmed[1111]; |
| 100 | Int_t idCarbon = idtmed[1112]; |
| 101 | Int_t idRoha = idtmed[1113]; |
| 102 | Int_t idNomex = idtmed[1114]; // honey comb |
| 103 | Int_t idNoryl = idtmed[1115]; |
| 104 | Int_t idNomexB = idtmed[1116]; // bulk material |
| 105 | |
| 106 | // sensitive area: 40*40 cm**2 |
| 107 | const Float_t kSensLength = 40.; |
| 108 | const Float_t kSensHeight = 40.; |
| 1c334adf |
109 | const Float_t kSensWidth = AliMUONConstants::Pitch()*2;// 0.5 cm, according to TDR fig 2.120 |
| e516b01d |
110 | const Int_t kSensMaterial = idGas; |
| 111 | // const Float_t kYoverlap = 1.5; |
| 112 | |
| 113 | // PCB dimensions in cm; width: 30 mum copper |
| 114 | const Float_t kPcbLength = kSensLength; |
| 115 | const Float_t kPcbHeight = 58.; // updated Ch. Finck |
| 116 | const Float_t kPcbWidth = 0.003; |
| 117 | const Int_t kPcbMaterial = idCopper; |
| 118 | |
| 119 | // Insulating material: 220 mum G10 fiber glued to pcb |
| 120 | const Float_t kInsuLength = kPcbLength; |
| 121 | const Float_t kInsuHeight = kPcbHeight; |
| 122 | const Float_t kInsuWidth = 0.022; // updated Ch. Finck |
| 123 | const Int_t kInsuMaterial = idG10; |
| 124 | |
| 125 | // Carbon fiber panels: 200mum carbon/epoxy skin |
| 126 | const Float_t kCarbonWidth = 0.020; |
| 127 | const Int_t kCarbonMaterial = idCarbon; |
| 128 | |
| 129 | // Nomex (honey comb) between the two panel carbon skins |
| 130 | const Float_t kNomexLength = kSensLength; |
| 131 | const Float_t kNomexHeight = kSensHeight; |
| 132 | const Float_t kNomexWidth = 0.8; // updated Ch. Finck |
| 133 | const Int_t kNomexMaterial = idNomex; |
| 134 | |
| 135 | // Bulk Nomex under panel sandwich Ch. Finck |
| 136 | const Float_t kNomexBWidth = 0.025; |
| 137 | const Int_t kNomexBMaterial = idNomexB; |
| 138 | |
| 139 | // Panel sandwich 0.02 carbon*2 + 0.8 nomex |
| 140 | const Float_t kPanelLength = kSensLength; |
| 141 | const Float_t kPanelHeight = kSensHeight; |
| 142 | const Float_t kPanelWidth = 2 * kCarbonWidth + kNomexWidth; |
| 143 | |
| f4a7360f |
144 | // Frame along the rounded (spacers) slats |
| 145 | const Float_t kRframeHeight = 2.00; |
| 146 | |
| e516b01d |
147 | // spacer around the slat: 2 sticks along length,2 along height |
| 148 | // H: the horizontal ones |
| 149 | const Float_t kHframeLength = kPcbLength; |
| 150 | const Float_t kHframeHeight = 1.95; // updated Ch. Finck |
| 151 | const Float_t kHframeWidth = kSensWidth; |
| 152 | const Int_t kHframeMaterial = idNoryl; |
| 153 | |
| 154 | // V: the vertical ones; vertical spacers |
| 155 | const Float_t kVframeLength = 2.5; |
| 156 | const Float_t kVframeHeight = kSensHeight + kHframeHeight; |
| 157 | const Float_t kVframeWidth = kSensWidth; |
| 158 | const Int_t kVframeMaterial = idNoryl; |
| 159 | |
| 160 | // B: the horizontal border filled with rohacell: ok Ch. Finck |
| 161 | const Float_t kBframeLength = kHframeLength; |
| 162 | const Float_t kBframeHeight = (kPcbHeight - kSensHeight)/2. - kHframeHeight; |
| 163 | const Float_t kBframeWidth = kHframeWidth; |
| 164 | const Int_t kBframeMaterial = idRoha; |
| 165 | |
| 166 | // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) for electronics |
| 167 | const Float_t kNulocLength = 2.5; |
| 168 | const Float_t kNulocHeight = kBframeHeight; |
| 169 | const Float_t kNulocWidth = 0.0030 + 0.0014; // equivalent copper width of vetronite; |
| 170 | const Int_t kNulocMaterial = idCopper; |
| 171 | |
| 172 | // Slat parameters |
| 173 | const Float_t kSlatHeight = kPcbHeight; |
| 174 | const Float_t kSlatWidth = kSensWidth + 2.*(kPcbWidth + kInsuWidth + kPanelWidth |
| 175 | + kNomexBWidth); //replaced rohacell with Nomex Ch. Finck |
| eb1c3e3a |
176 | // const Int_t kSlatMaterial = idAir; |
| e516b01d |
177 | const Float_t kDslatLength = -1.25; // position of the slat respect to the beam plane (half vertical spacer) Ch. Finck |
| 178 | Float_t zSlat = AliMUONConstants::DzSlat();// implemented Ch. Finck |
| 179 | Float_t dzCh = AliMUONConstants::DzCh(); |
| 180 | |
| 181 | Float_t spar[3]; |
| 182 | Int_t i, j; |
| 183 | Int_t detElemId; |
| 184 | |
| 185 | // the panel volume contains the nomex |
| 186 | Float_t panelpar[3] = { kPanelLength/2., kPanelHeight/2., kPanelWidth/2. }; |
| 187 | Float_t nomexpar[3] = { kNomexLength/2., kNomexHeight/2., kNomexWidth/2. }; |
| 188 | Float_t twidth = kPanelWidth + kNomexBWidth; |
| 189 | Float_t nomexbpar[3] = {kNomexLength/2., kNomexHeight/2.,twidth/2. };// bulk nomex |
| 190 | |
| 191 | // insulating material contains PCB-> gas |
| 192 | twidth = 2*(kInsuWidth + kPcbWidth) + kSensWidth ; |
| 193 | Float_t insupar[3] = {kInsuLength/2., kInsuHeight/2., twidth/2. }; |
| 194 | twidth -= 2 * kInsuWidth; |
| 195 | Float_t pcbpar[3] = {kPcbLength/2., kPcbHeight/2., twidth/2. }; |
| 196 | Float_t senspar[3] = {kSensLength/2., kSensHeight/2., kSensWidth/2. }; |
| 197 | Float_t theight = 2 * kHframeHeight + kSensHeight; |
| 198 | Float_t hFramepar[3] = {kHframeLength/2., theight/2., kHframeWidth/2.}; |
| 199 | Float_t bFramepar[3] = {kBframeLength/2., kBframeHeight/2., kBframeWidth/2.}; |
| 200 | Float_t vFramepar[3] = {kVframeLength/2., kVframeHeight/2., kVframeWidth/2.}; |
| 201 | Float_t nulocpar[3] = {kNulocLength/2., kNulocHeight/2., kNulocWidth/2.}; |
| 202 | |
| 203 | Float_t xx; |
| 204 | Float_t xxmax = (kBframeLength - kNulocLength)/2.; |
| 205 | Int_t index=0; |
| d1cd2474 |
206 | |
| e516b01d |
207 | AliMUONChamber *iChamber, *iChamber1, *iChamber2; |
| d12a7158 |
208 | |
| e516b01d |
209 | Int_t* fStations = new Int_t[5]; |
| 210 | for (Int_t i=0; i<5; i++) fStations[i] = 1; |
| 211 | fStations[2] = 1; |
| 212 | |
| 213 | if (fStations[2]) |
| d1cd2474 |
214 | { |
| e516b01d |
215 | //******************************************************************** |
| e118b27e |
216 | // Station 3 ** |
| 217 | //******************************************************************** |
| 218 | // indices 1 and 2 for first and second chambers in the station |
| 219 | // iChamber (first chamber) kept for other quanties than Z, |
| 220 | // assumed to be the same in both chambers |
| e516b01d |
221 | |
| e118b27e |
222 | iChamber = &fMUON->Chamber(4); |
| e516b01d |
223 | iChamber1 = iChamber; |
| e118b27e |
224 | iChamber2 = &fMUON->Chamber(5); |
| d1cd2474 |
225 | |
| b7ef3c96 |
226 | //GetGeometry(4)->SetDebug(kTRUE); |
| 227 | //GetGeometry(5)->SetDebug(kTRUE); |
| e118b27e |
228 | |
| 6ffd4cb7 |
229 | if (!gAlice->GetModule("DIPO")) { |
| 230 | // Mother volume for each chamber in st3 are only defined if Dipole volue is there. |
| 231 | // Outer excess and inner recess for mother volume radius |
| 232 | // with respect to ROuter and RInner |
| 124dd59f |
233 | Float_t dMotherInner = AliMUONConstants::Rmin(2)-kRframeHeight; |
| 234 | Float_t dMotherOutner= AliMUONConstants::Rmax(2)+kVframeLength + 37.0; |
| 235 | // Additional 37 cm gap is needed to wrap the corners of the slats sin Rmax represent the maximum active radius of the chamber with 2pi phi acceptance |
| 6ffd4cb7 |
236 | Float_t tpar[3]; |
| b7ef3c96 |
237 | Double_t dstation = ( (-AliMUONConstants::DefaultChamberZ(5)) - |
| 238 | (-AliMUONConstants::DefaultChamberZ(4)) ) /2.1; |
| 124dd59f |
239 | tpar[0] = dMotherInner; |
| 240 | tpar[1] = dMotherOutner; |
| 6ffd4cb7 |
241 | tpar[2] = dstation; |
| 242 | gMC->Gsvolu("CH05", "TUBE", idAir, tpar, 3); |
| 243 | gMC->Gsvolu("CH06", "TUBE", idAir, tpar, 3); |
| 6ffd4cb7 |
244 | } |
| e516b01d |
245 | // volumes for slat geometry (xx=5,..,10 chamber id): |
| 246 | // Sxx0 Sxx1 Sxx2 Sxx3 --> Slat Mother volumes |
| 247 | // SxxG --> Sensitive volume (gas) |
| 248 | // SxxP --> PCB (copper) |
| 249 | // SxxI --> Insulator (G10) |
| 250 | // SxxC --> Carbon panel |
| 251 | // SxxN --> Nomex comb |
| 252 | // SxxX --> Nomex bulk |
| 253 | // SxxH, SxxV --> Horizontal and Vertical frames (Noryl) |
| 254 | // SB5x --> Volumes for the 35 cm long PCB |
| 255 | // slat dimensions: slat is a MOTHER volume!!! made of air |
| 256 | |
| 257 | // only for chamber 5: slat 1 has a PCB shorter by 5cm! |
| 258 | |
| 259 | Float_t tlength = 35.; |
| 260 | Float_t panelpar2[3] = { tlength/2., panelpar[1], panelpar[2]}; |
| 261 | Float_t nomexpar2[3] = { tlength/2., nomexpar[1], nomexpar[2]}; |
| 262 | Float_t nomexbpar2[3] = { tlength/2., nomexbpar[1], nomexbpar[2]}; |
| 263 | Float_t insupar2[3] = { tlength/2., insupar[1], insupar[2]}; |
| 264 | Float_t pcbpar2[3] = { tlength/2., pcbpar[1], pcbpar[2]}; |
| 265 | Float_t senspar2[3] = { tlength/2., senspar[1], senspar[2]}; |
| 266 | Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]}; |
| 267 | Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]}; |
| 268 | Float_t *dum=0; |
| 269 | Float_t pcbDLength3 = (kPcbLength - tlength); |
| 270 | |
| 271 | const Int_t kNslats3 = 5; // number of slats per quadrant |
| 272 | const Int_t kNPCB3[kNslats3] = {4, 4, 4, 3, 2}; // n PCB per slat |
| 273 | const Float_t kXpos3[kNslats3] = {0., 0., 0., 0., 0.};//{31., 0., 0., 0., 0.}; |
| 274 | const Float_t kYpos3[kNslats3] = {0, 37.8, 37.7, 37.3, 33.7}; |
| 275 | Float_t slatLength3[kNslats3]; |
| 276 | |
| 277 | // create and position the slat (mother) volumes |
| 278 | |
| 279 | char idSlatCh5[5]; |
| 280 | char idSlatCh6[5]; |
| 281 | Float_t xSlat3; |
| 282 | Float_t ySlat3 = 0; |
| 283 | Float_t angle = 0.; |
| 284 | Float_t spar2[3]; |
| 285 | for (i = 0; i < kNslats3; i++){ |
| 286 | |
| 287 | slatLength3[i] = kPcbLength * kNPCB3[i] + 2.* kVframeLength; |
| 288 | xSlat3 = slatLength3[i]/2. + kDslatLength + kXpos3[i]; |
| 289 | ySlat3 += kYpos3[i]; |
| 290 | |
| 291 | spar[0] = slatLength3[i]/2.; |
| 292 | spar[1] = kSlatHeight/2.; |
| 293 | spar[2] = kSlatWidth/2.; |
| 294 | // take away 5 cm from the first slat in chamber 5 |
| 7ddb761c |
295 | if (i == 0 || i == 1 || i == 2) { // 1 pcb is shortened by 5cm |
| e516b01d |
296 | spar2[0] = spar[0] - pcbDLength3/2.; |
| 297 | } else { |
| 298 | spar2[0] = spar[0]; |
| 299 | } |
| 300 | spar2[1] = spar[1]; |
| 301 | spar2[2] = spar[2]; |
| 302 | Float_t dzCh3 = dzCh; |
| 303 | Float_t zSlat3 = (i%2 ==0)? -zSlat : zSlat; // seems not that zSlat3 = zSlat4 & 5 refering to plan PQ7EN345-6 ? |
| 304 | |
| e856ab99 |
305 | sprintf(idSlatCh5,"LA%d",i+kNslats3-1); |
| eb1c3e3a |
306 | //gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| e856ab99 |
307 | detElemId = 509 - (i + kNslats3-1-4); |
| e516b01d |
308 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3), |
| 309 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| 310 | |
| 311 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2+i); |
| eb1c3e3a |
312 | //gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| e856ab99 |
313 | detElemId = 500 + (i + kNslats3-1-4); |
| e516b01d |
314 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3), |
| 315 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| 316 | |
| 317 | if (i > 0) { |
| 318 | sprintf(idSlatCh5,"LA%d",kNslats3-1-i); |
| eb1c3e3a |
319 | // gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| e856ab99 |
320 | detElemId = 509 + (i + kNslats3-1-4); |
| e516b01d |
321 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3), |
| 322 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 323 | |
| 324 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2-i); |
| eb1c3e3a |
325 | // gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| e856ab99 |
326 | detElemId = 518 - (i + kNslats3-1-4); |
| e516b01d |
327 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3), |
| 328 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| 329 | } |
| 330 | |
| 331 | sprintf(idSlatCh6,"LB%d",kNslats3-1+i); |
| eb1c3e3a |
332 | // gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
333 | detElemId = 609 - (i + kNslats3-1-4); |
| e516b01d |
334 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3), |
| 335 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| 336 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2+i); |
| eb1c3e3a |
337 | // gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
338 | detElemId = 600 + (i + kNslats3-1-4); |
| e516b01d |
339 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3), |
| 340 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 341 | |
| 342 | if (i > 0) { |
| 343 | sprintf(idSlatCh6,"LB%d",kNslats3-1-i); |
| eb1c3e3a |
344 | //gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
345 | detElemId = 609 + (i + kNslats3-1-4); |
| e516b01d |
346 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3), |
| 347 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 348 | |
| 349 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2-i); |
| eb1c3e3a |
350 | //gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
351 | detElemId = 618 - (i + kNslats3-1-4); |
| e516b01d |
352 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3), |
| 353 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| 354 | } |
| 355 | } |
| d1cd2474 |
356 | |
| e516b01d |
357 | // create the panel volume |
| d1cd2474 |
358 | |
| e516b01d |
359 | gMC->Gsvolu("S05C","BOX",kCarbonMaterial,panelpar,3); |
| 360 | gMC->Gsvolu("SB5C","BOX",kCarbonMaterial,panelpar2,3); |
| 361 | gMC->Gsvolu("S06C","BOX",kCarbonMaterial,panelpar,3); |
| 4846c3ab |
362 | |
| e516b01d |
363 | // create the nomex volume (honey comb) |
| d1cd2474 |
364 | |
| e516b01d |
365 | gMC->Gsvolu("S05N","BOX",kNomexMaterial,nomexpar,3); |
| 366 | gMC->Gsvolu("SB5N","BOX",kNomexMaterial,nomexpar2,3); |
| 367 | gMC->Gsvolu("S06N","BOX",kNomexMaterial,nomexpar,3); |
| 4846c3ab |
368 | |
| e516b01d |
369 | // create the nomex volume (bulk) |
| 370 | |
| 371 | gMC->Gsvolu("S05X","BOX",kNomexBMaterial,nomexbpar,3); |
| 372 | gMC->Gsvolu("SB5X","BOX",kNomexBMaterial,nomexbpar2,3); |
| 373 | gMC->Gsvolu("S06X","BOX",kNomexBMaterial,nomexbpar,3); |
| d1cd2474 |
374 | |
| e516b01d |
375 | // create the insulating material volume |
| 376 | |
| 377 | gMC->Gsvolu("S05I","BOX",kInsuMaterial,insupar,3); |
| 378 | gMC->Gsvolu("SB5I","BOX",kInsuMaterial,insupar2,3); |
| 379 | gMC->Gsvolu("S06I","BOX",kInsuMaterial,insupar,3); |
| 4846c3ab |
380 | |
| e516b01d |
381 | // create the PCB volume |
| d1cd2474 |
382 | |
| e516b01d |
383 | gMC->Gsvolu("S05P","BOX",kPcbMaterial,pcbpar,3); |
| 384 | gMC->Gsvolu("SB5P","BOX",kPcbMaterial,pcbpar2,3); |
| 385 | gMC->Gsvolu("S06P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
386 | |
| e516b01d |
387 | // create the sensitive volumes, |
| 4846c3ab |
388 | |
| e516b01d |
389 | gMC->Gsvolu("S05G","BOX",kSensMaterial,dum,0); |
| 390 | gMC->Gsvolu("S06G","BOX",kSensMaterial,dum,0); |
| d1cd2474 |
391 | |
| e516b01d |
392 | // create the vertical frame volume |
| d1cd2474 |
393 | |
| e516b01d |
394 | gMC->Gsvolu("S05V","BOX",kVframeMaterial,vFramepar,3); |
| 395 | gMC->Gsvolu("S06V","BOX",kVframeMaterial,vFramepar,3); |
| d1cd2474 |
396 | |
| e516b01d |
397 | // create the horizontal frame volume |
| d1cd2474 |
398 | |
| e516b01d |
399 | gMC->Gsvolu("S05H","BOX",kHframeMaterial,hFramepar,3); |
| 400 | gMC->Gsvolu("SB5H","BOX",kHframeMaterial,hFramepar2,3); |
| 401 | gMC->Gsvolu("S06H","BOX",kHframeMaterial,hFramepar,3); |
| 4846c3ab |
402 | |
| e516b01d |
403 | // create the horizontal border volume |
| d1cd2474 |
404 | |
| e516b01d |
405 | gMC->Gsvolu("S05B","BOX",kBframeMaterial,bFramepar,3); |
| 406 | gMC->Gsvolu("SB5B","BOX",kBframeMaterial,bFramepar2,3); |
| 407 | gMC->Gsvolu("S06B","BOX",kBframeMaterial,bFramepar,3); |
| 4846c3ab |
408 | |
| e516b01d |
409 | index = 0; |
| 410 | for (i = 0; i<kNslats3; i++){ |
| 411 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 412 | |
| 413 | if (i == 0 && quadrant == 2) continue; |
| 414 | if (i == 0 && quadrant == 4) continue; |
| 415 | |
| 416 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(i,quadrant,kNslats3-1)); |
| 417 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(i,quadrant,kNslats3-1)); |
| 418 | Float_t xvFrame = (slatLength3[i] - kVframeLength)/2.; |
| 419 | Float_t xvFrame2 = xvFrame; |
| 420 | |
| 421 | if (i == 0 || i == 1 || i == 2) xvFrame2 -= pcbDLength3/2.; |
| 422 | |
| 423 | // position the vertical frames |
| 424 | if ( i > 2) { |
| 425 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 426 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 427 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 428 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 429 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 430 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 431 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 432 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 433 | } |
| 434 | |
| 435 | if (i == 2) { |
| 436 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 437 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); |
| 438 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 439 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 440 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 441 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 442 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 443 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 444 | } |
| 445 | |
| 446 | if (i == 0 || i == 1) { // no rounded spacer for the moment (Ch. Finck) |
| 447 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 448 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); |
| 449 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 450 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 451 | } |
| 452 | |
| 453 | // position the panels and the insulating material |
| 454 | for (j = 0; j < kNPCB3[i]; j++){ |
| 455 | if (i == 1 && j == 0) continue; |
| 456 | if (i == 0 && j == 0) continue; |
| 457 | index++; |
| 458 | Float_t xx = kSensLength * (-kNPCB3[i]/2. + j + 0.5); |
| 459 | Float_t xx2 = xx - pcbDLength3/2.; |
| d1cd2474 |
460 | |
| e516b01d |
461 | Float_t zPanel = spar[2] - nomexbpar[2]; |
| 462 | |
| 463 | if ( (i == 0 || i == 1 || i == 2) && j == kNPCB3[i]-1) { // 1 pcb is shortened by 5cm |
| 464 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index-1,TGeoTranslation(xx2,0.,zPanel)); |
| 465 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index,TGeoTranslation(xx2,0.,-zPanel)); |
| 466 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5I", idSlatCh5, index,TGeoTranslation(xx2,0.,0.)); |
| 467 | } else { |
| 468 | GetEnvelopes(4)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 469 | GetEnvelopes(4)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 470 | GetEnvelopes(4)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx,0.,0.)); |
| 471 | } |
| 472 | GetEnvelopes(5)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 473 | GetEnvelopes(5)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 474 | GetEnvelopes(5)->AddEnvelopeConstituent("S06I", idSlatCh6, index,TGeoTranslation(xx,0.,0.)); |
| d1cd2474 |
475 | |
| e516b01d |
476 | } |
| 477 | } |
| 478 | } |
| 479 | |
| 480 | // position the nomex volume inside the panel volume |
| 481 | gMC->Gspos("S05N",1,"S05C",0.,0.,0.,0,"ONLY"); |
| 482 | gMC->Gspos("SB5N",1,"SB5C",0.,0.,0.,0,"ONLY"); |
| 483 | gMC->Gspos("S06N",1,"S06C",0.,0.,0.,0,"ONLY"); |
| 4846c3ab |
484 | |
| e516b01d |
485 | // position panel volume inside the bulk nomex material volume |
| 486 | gMC->Gspos("S05C",1,"S05X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 487 | gMC->Gspos("SB5C",1,"SB5X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 488 | gMC->Gspos("S06C",1,"S06X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 489 | |
| 490 | // position the PCB volume inside the insulating material volume |
| 491 | gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY"); |
| 492 | gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY"); |
| 493 | gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY"); |
| 4846c3ab |
494 | |
| e516b01d |
495 | // position the horizontal frame volume inside the PCB volume |
| 496 | gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY"); |
| 497 | gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY"); |
| 498 | gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY"); |
| 4846c3ab |
499 | |
| e516b01d |
500 | // position the sensitive volume inside the horizontal frame volume |
| 501 | gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3); |
| 502 | gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3); |
| 503 | gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3); |
| 4846c3ab |
504 | |
| 505 | |
| e516b01d |
506 | // position the border volumes inside the PCB volume |
| 507 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| 508 | gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY"); |
| 509 | gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY"); |
| 510 | gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY"); |
| 511 | gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY"); |
| 512 | |
| 513 | gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY"); |
| 514 | gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY"); |
| 4846c3ab |
515 | |
| e516b01d |
516 | // create the NULOC volume and position it in the horizontal frame |
| 517 | gMC->Gsvolu("S05E","BOX",kNulocMaterial,nulocpar,3); |
| 518 | gMC->Gsvolu("S06E","BOX",kNulocMaterial,nulocpar,3); |
| 519 | index = 0; |
| 520 | Float_t xxmax2 = xxmax - pcbDLength3/2.; |
| 521 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| 522 | index++; |
| 523 | gMC->Gspos("S05E",2*index-1,"S05B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 524 | gMC->Gspos("S05E",2*index ,"S05B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 525 | gMC->Gspos("S06E",2*index-1,"S06B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 526 | gMC->Gspos("S06E",2*index ,"S06B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY"); |
| 527 | if (xx > -xxmax2 && xx< xxmax2) { |
| 528 | gMC->Gspos("S05E",2*index-1,"SB5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY"); |
| 529 | gMC->Gspos("S05E",2*index ,"SB5B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY"); |
| 530 | } |
| 531 | } |
| 532 | |
| 533 | // position the volumes approximating the circular section of the pipe |
| 534 | Float_t epsilon = 0.001; |
| 535 | Int_t ndiv = 6; |
| 536 | Int_t imax = 1; |
| 537 | Double_t divpar[3]; |
| 538 | Double_t dydiv = kSensHeight/ndiv; |
| 539 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
| b7ef3c96 |
540 | Double_t rmin = AliMUONConstants::Rmin(2);// Same radius for both chamber in St3 |
| e516b01d |
541 | Double_t xdiv = 0.; |
| 542 | Float_t xvol; |
| 543 | Float_t yvol; |
| 544 | |
| 545 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 546 | ydiv += dydiv; |
| 547 | xdiv = 0.; |
| 6f7aa53f |
548 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
| e516b01d |
549 | divpar[0] = (kPcbLength - xdiv)/2.; |
| 550 | divpar[1] = dydiv/2. - epsilon; |
| 551 | divpar[2] = kSensWidth/2.; |
| 552 | xvol = (kPcbLength + xdiv)/2.; |
| 553 | yvol = ydiv; |
| 554 | |
| 555 | // Volumes close to the beam pipe for slat i=1 so 4 slats per chamber |
| 556 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 557 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(1,quadrant,kNslats3-1)); |
| 558 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(1,quadrant,kNslats3-1)); |
| 559 | |
| 560 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5, quadrant*100+imax+4*idiv+1, |
| 561 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[1]/2.),yvol-kPcbLength,0.),3,divpar); |
| 562 | |
| 563 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6, quadrant*100+imax+4*idiv+1, |
| 564 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[1]/2.),yvol-kPcbLength,0.),3,divpar); |
| 565 | } |
| 566 | } |
| 567 | |
| 568 | // Volumes close to the beam pipe for slat i=0 so 2 slats per chamber (central slat for station 3) |
| 569 | // Gines Martinez, Subatech sep 04 |
| 570 | // 9 box volumes are used to define the PCB closed to the beam pipe of the slat 122000SR1 of chamber 5 and 6 of St3 |
| 571 | // Accordingly to plan PQ-LAT-SR1 of CEA-DSM-DAPNIA-SIS/BE ph HARDY 8-Oct-2002 |
| 572 | // Rmin = 31.5 cm |
| b7ef3c96 |
573 | rmin = AliMUONConstants::Rmin(2); // Same radius for both chamber in St3 |
| e516b01d |
574 | ndiv = 9; |
| 575 | dydiv = kSensHeight/ndiv; // Vertical size of the box volume approximating the rounded PCB |
| 576 | ydiv = -kSensHeight/2 + dydiv/2.; // Initializing vertical position of the volume from bottom |
| 577 | xdiv = 0.; // Initializing horizontal position of the box volumes |
| 578 | |
| 579 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 580 | xdiv = TMath::Abs( rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ) ); |
| 581 | divpar[0] = (kPcbLength - xdiv)/2.; // Dimension of the box volume |
| 582 | divpar[1] = dydiv/2. - epsilon; |
| 583 | divpar[2] = kSensWidth/2.; |
| 584 | xvol = (kPcbLength + xdiv)/2.; //2D traslition for positionning of box volume |
| 585 | yvol = ydiv; |
| 586 | Int_t side; |
| 587 | for (side = 1; side <= 2; side++) { |
| 588 | sprintf(idSlatCh5,"LA%d",4); |
| 589 | sprintf(idSlatCh6,"LB%d",4); |
| 590 | if(side == 2) { |
| 591 | sprintf(idSlatCh5,"LA%d",13); |
| 592 | sprintf(idSlatCh6,"LB%d",13); |
| 593 | } |
| 594 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5,500+side*100+imax+4*idiv+1, |
| 595 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[0]/2.),yvol,0.),3,divpar); |
| 596 | |
| 597 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6,500+side*100+imax+4*idiv+1, |
| 598 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[0]/2.),yvol,0.),3,divpar); |
| 599 | } |
| 600 | ydiv += dydiv; // Going from bottom to top |
| 601 | } |
| 602 | // cout << "Geometry for Station 3...... done" << endl; |
| d1cd2474 |
603 | } |
| 604 | |
| e516b01d |
605 | if (fStations[3]) { |
| d1cd2474 |
606 | |
| 607 | |
| e516b01d |
608 | // //******************************************************************** |
| 609 | // // Station 4 ** |
| 610 | // //******************************************************************** |
| 611 | // // indices 1 and 2 for first and second chambers in the station |
| 612 | // // iChamber (first chamber) kept for other quanties than Z, |
| 613 | // // assumed to be the same in both chambers |
| 614 | // corrected geometry (JP. Cussonneau, Ch. Finck) |
| d1cd2474 |
615 | |
| e118b27e |
616 | iChamber = &fMUON->Chamber(6); |
| e516b01d |
617 | iChamber1 = iChamber; |
| e118b27e |
618 | iChamber2 = &fMUON->Chamber(7); |
| e516b01d |
619 | |
| 620 | const Int_t kNslats4 = 7; // number of slats per quadrant |
| 621 | const Int_t kNPCB4[kNslats4] = {5, 6, 5, 5, 4, 3, 2}; // n PCB per slat |
| 622 | const Float_t kXpos4[kNslats4] = {38.2, 0., 0., 0., 0., 0., 0.}; |
| 623 | const Float_t kYpos41[kNslats4] = {0., 38.2, 34.40, 36.60, 29.3, 37.0, 28.6}; |
| 624 | const Float_t kYpos42[kNslats4] = {0., 38.2, 37.85, 37.55, 29.4, 37.0, 28.6}; |
| 625 | |
| 626 | Float_t slatLength4[kNslats4]; |
| 627 | |
| 6ffd4cb7 |
628 | |
| 629 | // Mother volume for each chamber |
| 630 | // Outer excess and inner recess for mother volume radius |
| 631 | // with respect to ROuter and RInner |
| 124dd59f |
632 | Float_t dMotherInner = AliMUONConstants::Rmin(3)-kRframeHeight; |
| 633 | // Additional 40 cm gap is needed to wrap the corners of the slats since Rmax represent the maximum active radius of the chamber with 2pi phi acceptance |
| 634 | Float_t dMotherOutner= AliMUONConstants::Rmax(3)+kVframeLength + 40.0; |
| 6ffd4cb7 |
635 | Float_t tpar[3]; |
| b7ef3c96 |
636 | Double_t dstation = ( (-AliMUONConstants::DefaultChamberZ(7)) - |
| 2c9844e7 |
637 | (-AliMUONConstants::DefaultChamberZ(6)) ) /2.2; |
| 124dd59f |
638 | tpar[0] = dMotherInner; |
| 639 | tpar[1] = dMotherOutner; |
| 6ffd4cb7 |
640 | tpar[2] = dstation; |
| 641 | gMC->Gsvolu("CH07", "TUBE", idAir, tpar, 3); |
| 642 | gMC->Gsvolu("CH08", "TUBE", idAir, tpar, 3); |
| 6ffd4cb7 |
643 | |
| e516b01d |
644 | // create and position the slat (mother) volumes |
| 645 | |
| 646 | char idSlatCh7[5]; |
| 647 | char idSlatCh8[5]; |
| 648 | Float_t xSlat4; |
| 649 | Float_t ySlat41 = 0; |
| 650 | Float_t ySlat42 = 0; |
| 651 | |
| 652 | angle = 0.; |
| 653 | |
| 654 | for (i = 0; i<kNslats4; i++){ |
| 655 | slatLength4[i] = kPcbLength * kNPCB4[i] + 2. * kVframeLength; |
| 656 | xSlat4 = slatLength4[i]/2. + kDslatLength + kXpos4[i]; |
| 657 | ySlat41 += kYpos41[i]; |
| 658 | ySlat42 += kYpos42[i]; |
| 659 | |
| 660 | spar[0] = slatLength4[i]/2.; |
| 661 | spar[1] = kSlatHeight/2.; |
| 662 | spar[2] = kSlatWidth/2.; |
| 663 | Float_t dzCh4 = dzCh; |
| 664 | Float_t zSlat4 = (i%2 ==0)? -zSlat : zSlat; |
| 665 | |
| 666 | sprintf(idSlatCh7,"LC%d",kNslats4-1+i); |
| eb1c3e3a |
667 | //gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
668 | detElemId = 713 - (i + kNslats4-1-6); |
| e516b01d |
669 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4), |
| 670 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| 671 | |
| 672 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2+i); |
| eb1c3e3a |
673 | //gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
674 | detElemId = 700 + (i + kNslats4-1-6); |
| e516b01d |
675 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4), |
| 676 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| d1cd2474 |
677 | |
| e516b01d |
678 | if (i > 0) { |
| 679 | sprintf(idSlatCh7,"LC%d",kNslats4-1-i); |
| eb1c3e3a |
680 | //gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
681 | detElemId = 713 + (i + kNslats4-1-6); |
| e516b01d |
682 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4), |
| 683 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 684 | |
| 685 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2-i); |
| e856ab99 |
686 | detElemId = 726 - (i + kNslats4-1-6); |
| eb1c3e3a |
687 | //gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
688 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, |
| 689 | TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4), |
| 690 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| 691 | } |
| 692 | |
| 693 | sprintf(idSlatCh8,"LD%d",kNslats4-1+i); |
| eb1c3e3a |
694 | //gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
695 | detElemId = 813 - (i + kNslats4-1-6); |
| e516b01d |
696 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4), |
| 697 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| 698 | |
| 699 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2+i); |
| e856ab99 |
700 | detElemId = 800 + (i + kNslats4-1-6); |
| eb1c3e3a |
701 | //gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
702 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4), |
| 703 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 704 | if (i > 0) { |
| 705 | sprintf(idSlatCh8,"LD%d",kNslats4-1-i); |
| e856ab99 |
706 | detElemId = 813 + (i + kNslats4-1-6); |
| eb1c3e3a |
707 | //gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
708 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4), |
| 709 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 710 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2-i); |
| e856ab99 |
711 | detElemId = 826 - (i + kNslats4-1-6); |
| eb1c3e3a |
712 | //gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
713 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4), |
| 714 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| 715 | } |
| 716 | } |
| d1cd2474 |
717 | |
| e516b01d |
718 | // create the panel volume |
| d1cd2474 |
719 | |
| e516b01d |
720 | gMC->Gsvolu("S07C","BOX",kCarbonMaterial,panelpar,3); |
| 721 | gMC->Gsvolu("S08C","BOX",kCarbonMaterial,panelpar,3); |
| d1cd2474 |
722 | |
| e516b01d |
723 | // create the nomex volume |
| d1cd2474 |
724 | |
| e516b01d |
725 | gMC->Gsvolu("S07N","BOX",kNomexMaterial,nomexpar,3); |
| 726 | gMC->Gsvolu("S08N","BOX",kNomexMaterial,nomexpar,3); |
| d1cd2474 |
727 | |
| d1cd2474 |
728 | |
| e516b01d |
729 | // create the nomex volume (bulk) |
| d1cd2474 |
730 | |
| e516b01d |
731 | gMC->Gsvolu("S07X","BOX",kNomexBMaterial,nomexbpar,3); |
| 732 | gMC->Gsvolu("S08X","BOX",kNomexBMaterial,nomexbpar,3); |
| d1cd2474 |
733 | |
| e516b01d |
734 | // create the insulating material volume |
| 735 | |
| 736 | gMC->Gsvolu("S07I","BOX",kInsuMaterial,insupar,3); |
| 737 | gMC->Gsvolu("S08I","BOX",kInsuMaterial,insupar,3); |
| 738 | |
| 739 | // create the PCB volume |
| 740 | |
| 741 | gMC->Gsvolu("S07P","BOX",kPcbMaterial,pcbpar,3); |
| 742 | gMC->Gsvolu("S08P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
743 | |
| e516b01d |
744 | // create the sensitive volumes, |
| 745 | |
| 746 | gMC->Gsvolu("S07G","BOX",kSensMaterial,dum,0); |
| 747 | gMC->Gsvolu("S08G","BOX",kSensMaterial,dum,0); |
| 748 | |
| 749 | // create the vertical frame volume |
| 750 | |
| 751 | gMC->Gsvolu("S07V","BOX",kVframeMaterial,vFramepar,3); |
| 752 | gMC->Gsvolu("S08V","BOX",kVframeMaterial,vFramepar,3); |
| 753 | |
| 754 | // create the horizontal frame volume |
| 755 | |
| 756 | gMC->Gsvolu("S07H","BOX",kHframeMaterial,hFramepar,3); |
| 757 | gMC->Gsvolu("S08H","BOX",kHframeMaterial,hFramepar,3); |
| 758 | |
| 759 | // create the horizontal border volume |
| 760 | |
| 761 | gMC->Gsvolu("S07B","BOX",kBframeMaterial,bFramepar,3); |
| 762 | gMC->Gsvolu("S08B","BOX",kBframeMaterial,bFramepar,3); |
| 763 | |
| 764 | index = 0; |
| 765 | for (i = 0; i < kNslats4; i++){ |
| 766 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 767 | |
| 768 | if (i == 0 && quadrant == 2) continue; |
| 769 | if (i == 0 && quadrant == 4) continue; |
| 770 | |
| 771 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(i,quadrant,kNslats4-1)); |
| 772 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(i,quadrant,kNslats4-1)); |
| 773 | Float_t xvFrame = (slatLength4[i] - kVframeLength)/2.; |
| 774 | |
| 775 | // position the vertical frames |
| 776 | if (i != 1) { |
| 777 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 778 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 779 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 780 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 781 | } else { // no rounded spacer yet |
| 782 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 783 | // GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 784 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 785 | // GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 786 | } |
| 787 | // position the panels and the insulating material |
| 788 | for (j = 0; j < kNPCB4[i]; j++){ |
| 789 | if (i == 1 && j == 0) continue; |
| 790 | index++; |
| 791 | Float_t xx = kSensLength * (-kNPCB4[i]/2.+j+.5); |
| 792 | |
| 793 | Float_t zPanel = spar[2] - nomexbpar[2]; |
| 794 | GetEnvelopes(6)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 795 | GetEnvelopes(6)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 796 | GetEnvelopes(6)->AddEnvelopeConstituent("S07I", idSlatCh7, index,TGeoTranslation(xx,0.,0.)); |
| 797 | GetEnvelopes(7)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 798 | GetEnvelopes(7)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 799 | GetEnvelopes(7)->AddEnvelopeConstituent("S08I", idSlatCh8, index,TGeoTranslation(xx,0.,0.)); |
| 800 | } |
| 801 | } |
| 802 | } |
| 803 | |
| 804 | // position the nomex volume inside the panel volume |
| 805 | gMC->Gspos("S07N",1,"S07C",0.,0.,0.,0,"ONLY"); |
| 806 | gMC->Gspos("S08N",1,"S08C",0.,0.,0.,0,"ONLY"); |
| 807 | |
| 808 | // position panel volume inside the bulk nomex material volume |
| 809 | gMC->Gspos("S07C",1,"S07X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 810 | gMC->Gspos("S08C",1,"S08X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 811 | |
| 812 | // position the PCB volume inside the insulating material volume |
| 813 | gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY"); |
| 814 | gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY"); |
| 815 | |
| 816 | // position the horizontal frame volume inside the PCB volume |
| 817 | gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY"); |
| 818 | gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY"); |
| 819 | |
| 820 | // position the sensitive volume inside the horizontal frame volume |
| 821 | gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3); |
| 822 | gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3); |
| 823 | |
| 824 | // position the border volumes inside the PCB volume |
| 825 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| 826 | gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY"); |
| 827 | gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY"); |
| 828 | gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY"); |
| 829 | gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY"); |
| 830 | |
| 831 | // create the NULOC volume and position it in the horizontal frame |
| 832 | |
| 833 | gMC->Gsvolu("S07E","BOX",kNulocMaterial,nulocpar,3); |
| 834 | gMC->Gsvolu("S08E","BOX",kNulocMaterial,nulocpar,3); |
| 835 | index = 0; |
| 836 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| 837 | index++; |
| 838 | gMC->Gspos("S07E",2*index-1,"S07B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 839 | gMC->Gspos("S07E",2*index ,"S07B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 840 | gMC->Gspos("S08E",2*index-1,"S08B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 841 | gMC->Gspos("S08E",2*index ,"S08B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 842 | } |
| 843 | |
| 844 | // position the volumes approximating the circular section of the pipe |
| 845 | |
| 846 | Float_t epsilon = 0.001; |
| 847 | Int_t ndiv = 10; |
| 848 | Int_t imax = 1; |
| 849 | Double_t divpar[3]; |
| 850 | Double_t dydiv = kSensHeight/ndiv; |
| 851 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
| b7ef3c96 |
852 | Float_t rmin = AliMUONConstants::Rmin(3); // Same radius for both chamber of St4 |
| e516b01d |
853 | Float_t xdiv = 0.; |
| 854 | Float_t xvol; |
| 855 | Float_t yvol; |
| 856 | |
| 857 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 858 | ydiv += dydiv; |
| 859 | xdiv = 0.; |
| 6f7aa53f |
860 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
| e516b01d |
861 | divpar[0] = (kPcbLength - xdiv)/2.; |
| 862 | divpar[1] = dydiv/2. - epsilon; |
| 863 | divpar[2] = kSensWidth/2.; |
| 864 | xvol = (kPcbLength + xdiv)/2.; |
| 865 | yvol = ydiv ; |
| 6296ba34 |
866 | |
| e516b01d |
867 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 868 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(1,quadrant,kNslats4-1)); |
| 869 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(1,quadrant,kNslats4-1)); |
| 6296ba34 |
870 | |
| e516b01d |
871 | GetEnvelopes(6)->AddEnvelopeConstituentParam("S07G",idSlatCh7, quadrant*100+imax+4*idiv+1, |
| 872 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength,0.),3,divpar); |
| 6296ba34 |
873 | |
| e516b01d |
874 | GetEnvelopes(7)->AddEnvelopeConstituentParam("S08G", idSlatCh8, quadrant*100+imax+4*idiv+1, |
| 875 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength,0.),3,divpar); |
| 876 | } |
| d12a7158 |
877 | } |
| e516b01d |
878 | // cout << "Geometry for Station 4...... done" << endl; |
| 879 | |
| 880 | } |
| d1cd2474 |
881 | |
| e516b01d |
882 | if (fStations[4]) { |
| 6296ba34 |
883 | |
| d1cd2474 |
884 | |
| e516b01d |
885 | // //******************************************************************** |
| 886 | // // Station 5 ** |
| 887 | // //******************************************************************** |
| 888 | // // indices 1 and 2 for first and second chambers in the station |
| 889 | // // iChamber (first chamber) kept for other quanties than Z, |
| 890 | // // assumed to be the same in both chambers |
| 891 | // corrected geometry (JP. Cussonneau, Ch. Finck) |
| 892 | |
| e118b27e |
893 | iChamber = &fMUON->Chamber(8); |
| e516b01d |
894 | iChamber1 = iChamber; |
| e118b27e |
895 | iChamber2 = &fMUON->Chamber(9); |
| d1cd2474 |
896 | |
| e516b01d |
897 | const Int_t kNslats5 = 7; // number of slats per quadrant |
| 898 | const Int_t kNPCB5[kNslats5] = {5, 6, 6, 6, 5, 4, 3}; // n PCB per slat |
| 899 | const Float_t kXpos5[kNslats5] = {38.2, 0., 0., 0., 0., 0., 0.}; |
| 900 | const Float_t kYpos5[kNslats5] = {0., 38.2, 37.9, 37.6, 37.3, 37.05, 36.75}; |
| 901 | Float_t slatLength5[kNslats5]; |
| 902 | |
| 6ffd4cb7 |
903 | // Mother volume for each chamber |
| 904 | // Outer excess and inner recess for mother volume radius |
| 905 | // with respect to ROuter and RInner |
| 124dd59f |
906 | Float_t dMotherInner = AliMUONConstants::Rmin(4)-kRframeHeight; |
| 907 | // Additional 40 cm gap is needed to wrap the corners of the slats since Rmax represent the maximum active radius of the chamber with 2pi phi acceptance |
| 908 | Float_t dMotherOutner= AliMUONConstants::Rmax(4)+kVframeLength + 40.0; |
| 6ffd4cb7 |
909 | Float_t tpar[3]; |
| b7ef3c96 |
910 | Double_t dstation = ( (-AliMUONConstants::DefaultChamberZ(9)) - |
| 911 | (-AliMUONConstants::DefaultChamberZ(8)) ) /2.3; |
| 124dd59f |
912 | tpar[0] = dMotherInner; |
| 913 | tpar[1] = dMotherOutner; |
| 6ffd4cb7 |
914 | tpar[2] = dstation; |
| 915 | gMC->Gsvolu("CH09", "TUBE", idAir, tpar, 3); |
| 916 | gMC->Gsvolu("CH10", "TUBE", idAir, tpar, 3); |
| 6ffd4cb7 |
917 | |
| e516b01d |
918 | // create and position the slat (mother) volumes |
| 919 | |
| 920 | char idSlatCh9[5]; |
| 921 | char idSlatCh10[5]; |
| 922 | Float_t xSlat5; |
| 923 | Float_t ySlat5 = 0; |
| 924 | angle = 0.; |
| 925 | |
| 926 | for (i = 0; i < kNslats5; i++){ |
| 927 | |
| 928 | slatLength5[i] = kPcbLength * kNPCB5[i] + 2.* kVframeLength; |
| 929 | xSlat5 = slatLength5[i]/2. + kDslatLength + kXpos5[i]; |
| 930 | ySlat5 += kYpos5[i]; |
| 931 | |
| 932 | spar[0] = slatLength5[i]/2.; |
| 933 | spar[1] = kSlatHeight/2.; |
| 934 | spar[2] = kSlatWidth/2.; |
| 935 | |
| 936 | Float_t dzCh5 = dzCh; |
| 937 | Float_t zSlat5 = (i%2 ==0)? -zSlat : zSlat; |
| 938 | |
| 939 | sprintf(idSlatCh9,"LE%d",kNslats5-1+i); |
| e856ab99 |
940 | detElemId = 913 - (i + kNslats5-1-6); |
| eb1c3e3a |
941 | //gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
942 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5), |
| 943 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| 944 | |
| 945 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2+i); |
| e856ab99 |
946 | detElemId = 900 + (i + kNslats5-1-6); |
| eb1c3e3a |
947 | //gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
948 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5), |
| 949 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| d1cd2474 |
950 | |
| e516b01d |
951 | if (i > 0) { |
| 952 | sprintf(idSlatCh9,"LE%d",kNslats5-1-i); |
| e856ab99 |
953 | detElemId = 913 + (i + kNslats5-1-6); |
| eb1c3e3a |
954 | //gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
955 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5), |
| 956 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 957 | |
| 958 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2-i); |
| e856ab99 |
959 | detElemId = 926 - (i + kNslats5-1-6); |
| eb1c3e3a |
960 | //gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
961 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5), |
| 962 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| 963 | } |
| 964 | |
| 965 | sprintf(idSlatCh10,"LF%d",kNslats5-1+i); |
| e856ab99 |
966 | detElemId = 1013 - (i + kNslats5-1-6); |
| eb1c3e3a |
967 | //gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
968 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5), |
| 969 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| 970 | |
| 971 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2+i); |
| e856ab99 |
972 | detElemId = 1000 + (i + kNslats5-1-6); |
| eb1c3e3a |
973 | //gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
974 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5), |
| 975 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 976 | |
| 977 | if (i > 0) { |
| 978 | sprintf(idSlatCh10,"LF%d",kNslats5-1-i); |
| e856ab99 |
979 | detElemId = 1013 + (i + kNslats5-1-6); |
| eb1c3e3a |
980 | //gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
981 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5), |
| 982 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 983 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2-i); |
| e856ab99 |
984 | detElemId = 1026 - (i + kNslats5-1-6); |
| eb1c3e3a |
985 | //gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| e516b01d |
986 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5), |
| 987 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| 988 | } |
| 989 | } |
| 990 | |
| 991 | // create the panel volume |
| d12a7158 |
992 | |
| e516b01d |
993 | gMC->Gsvolu("S09C","BOX",kCarbonMaterial,panelpar,3); |
| 994 | gMC->Gsvolu("S10C","BOX",kCarbonMaterial,panelpar,3); |
| 995 | |
| 996 | // create the nomex volume |
| 997 | |
| 998 | gMC->Gsvolu("S09N","BOX",kNomexMaterial,nomexpar,3); |
| 999 | gMC->Gsvolu("S10N","BOX",kNomexMaterial,nomexpar,3); |
| d1cd2474 |
1000 | |
| d1cd2474 |
1001 | |
| e516b01d |
1002 | // create the nomex volume (bulk) |
| d1cd2474 |
1003 | |
| e516b01d |
1004 | gMC->Gsvolu("S09X","BOX",kNomexBMaterial,nomexbpar,3); |
| 1005 | gMC->Gsvolu("S10X","BOX",kNomexBMaterial,nomexbpar,3); |
| d1cd2474 |
1006 | |
| e516b01d |
1007 | // create the insulating material volume |
| d1cd2474 |
1008 | |
| e516b01d |
1009 | gMC->Gsvolu("S09I","BOX",kInsuMaterial,insupar,3); |
| 1010 | gMC->Gsvolu("S10I","BOX",kInsuMaterial,insupar,3); |
| c3b69531 |
1011 | |
| e516b01d |
1012 | // create the PCB volume |
| 1013 | |
| 1014 | gMC->Gsvolu("S09P","BOX",kPcbMaterial,pcbpar,3); |
| 1015 | gMC->Gsvolu("S10P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
1016 | |
| e516b01d |
1017 | // create the sensitive volumes, |
| 1018 | |
| 1019 | gMC->Gsvolu("S09G","BOX",kSensMaterial,dum,0); |
| 1020 | gMC->Gsvolu("S10G","BOX",kSensMaterial,dum,0); |
| 1021 | |
| 1022 | // create the vertical frame volume |
| 1023 | |
| 1024 | gMC->Gsvolu("S09V","BOX",kVframeMaterial,vFramepar,3); |
| 1025 | gMC->Gsvolu("S10V","BOX",kVframeMaterial,vFramepar,3); |
| 1026 | |
| 1027 | // create the horizontal frame volume |
| 1028 | |
| 1029 | gMC->Gsvolu("S09H","BOX",kHframeMaterial,hFramepar,3); |
| 1030 | gMC->Gsvolu("S10H","BOX",kHframeMaterial,hFramepar,3); |
| 1031 | |
| 1032 | // create the horizontal border volume |
| 1033 | |
| 1034 | gMC->Gsvolu("S09B","BOX",kBframeMaterial,bFramepar,3); |
| 1035 | gMC->Gsvolu("S10B","BOX",kBframeMaterial,bFramepar,3); |
| 1036 | |
| 1037 | index = 0; |
| 1038 | for (i = 0; i < kNslats5; i++){ |
| 1039 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 1040 | |
| 1041 | if (i == 0 && quadrant == 2) continue; |
| 1042 | if (i == 0 && quadrant == 4) continue; |
| 1043 | |
| 1044 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(i,quadrant,kNslats5-1)); |
| 1045 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(i,quadrant,kNslats5-1)); |
| 1046 | Float_t xvFrame = (slatLength5[i] - kVframeLength)/2.; // ok |
| 1047 | |
| 1048 | // position the vertical frames (spacers) |
| 1049 | if (i != 1) { |
| 1050 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 1051 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 1052 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 1053 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 1054 | } else { // no rounded spacer yet |
| 1055 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 1056 | // GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 1057 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 1058 | // GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 1059 | } |
| 1060 | |
| 1061 | // position the panels and the insulating material |
| 1062 | for (j = 0; j < kNPCB5[i]; j++){ |
| 1063 | if (i == 1 && j == 0) continue; |
| 1064 | index++; |
| 1065 | Float_t xx = kSensLength * (-kNPCB5[i]/2.+j+.5); |
| 1066 | |
| 1067 | Float_t zPanel = spar[2] - nomexbpar[2]; |
| 1068 | GetEnvelopes(8)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 1069 | GetEnvelopes(8)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 1070 | GetEnvelopes(8)->AddEnvelopeConstituent("S09I", idSlatCh9, index,TGeoTranslation(xx,0.,0.)); |
| 1071 | |
| 1072 | GetEnvelopes(9)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 1073 | GetEnvelopes(9)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 1074 | GetEnvelopes(9)->AddEnvelopeConstituent("S10I", idSlatCh10, index,TGeoTranslation(xx,0.,0.)); |
| 1075 | } |
| 1076 | } |
| 1077 | } |
| 1078 | |
| 1079 | // position the nomex volume inside the panel volume |
| 1080 | gMC->Gspos("S09N",1,"S09C",0.,0.,0.,0,"ONLY"); |
| 1081 | gMC->Gspos("S10N",1,"S10C",0.,0.,0.,0,"ONLY"); |
| 1082 | |
| 1083 | // position panel volume inside the bulk nomex material volume |
| 1084 | gMC->Gspos("S09C",1,"S09X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 1085 | gMC->Gspos("S10C",1,"S10X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 1086 | |
| 1087 | // position the PCB volume inside the insulating material volume |
| 1088 | gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY"); |
| 1089 | gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY"); |
| 1090 | |
| 1091 | // position the horizontal frame volume inside the PCB volume |
| 1092 | gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY"); |
| 1093 | gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY"); |
| 1094 | |
| 1095 | // position the sensitive volume inside the horizontal frame volume |
| 1096 | gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3); |
| 1097 | gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3); |
| 1098 | |
| 1099 | // position the border volumes inside the PCB volume |
| 1100 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| 1101 | gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY"); |
| 1102 | gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY"); |
| 1103 | gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY"); |
| 1104 | gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY"); |
| 1105 | |
| 1106 | // // create the NULOC volume and position it in the horizontal frame |
| 1107 | |
| 1108 | gMC->Gsvolu("S09E","BOX",kNulocMaterial,nulocpar,3); |
| 1109 | gMC->Gsvolu("S10E","BOX",kNulocMaterial,nulocpar,3); |
| 1110 | index = 0; |
| 1111 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| 1112 | index++; |
| 1113 | gMC->Gspos("S09E",2*index-1,"S09B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 1114 | gMC->Gspos("S09E",2*index ,"S09B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 1115 | gMC->Gspos("S10E",2*index-1,"S10B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 1116 | gMC->Gspos("S10E",2*index ,"S10B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 1117 | } |
| 1118 | |
| d1cd2474 |
1119 | |
| e516b01d |
1120 | // position the volumes approximating the circular section of the pipe |
| 1121 | Float_t epsilon = 0.001; |
| 1122 | Int_t ndiv = 10; |
| 1123 | Int_t imax = 1; |
| 1124 | Double_t divpar[3]; |
| 1125 | Double_t dydiv = kSensHeight/ndiv; |
| 1126 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
| b7ef3c96 |
1127 | Float_t rmin = AliMUONConstants::Rmin(4); |
| e516b01d |
1128 | Float_t xdiv = 0.; |
| 1129 | Float_t xvol; |
| 1130 | Float_t yvol; |
| 1131 | |
| 1132 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 1133 | ydiv += dydiv; |
| 1134 | xdiv = 0.; |
| 6f7aa53f |
1135 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
| e516b01d |
1136 | divpar[0] = (kPcbLength - xdiv)/2.; |
| 1137 | divpar[1] = dydiv/2. - epsilon; |
| 1138 | divpar[2] = kSensWidth/2.; |
| 1139 | xvol = (kPcbLength + xdiv)/2.; |
| 1140 | yvol = ydiv; |
| 1141 | |
| 1142 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 1143 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(1,quadrant,kNslats5-1)); |
| 1144 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(1,quadrant,kNslats5-1)); |
| 1145 | |
| 1146 | GetEnvelopes(8)->AddEnvelopeConstituentParam("S09G", idSlatCh9, quadrant*100+imax+4*idiv+1, |
| 1147 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength,0.),3,divpar); |
| 1148 | GetEnvelopes(9)->AddEnvelopeConstituentParam("S10G", idSlatCh10, quadrant*100+imax+4*idiv+1, |
| 1149 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength,0.),3,divpar); |
| 1150 | } |
| d1cd2474 |
1151 | } |
| e516b01d |
1152 | // cout << "Geometry for Station 5...... done" << endl; |
| 1153 | |
| 1154 | } |
| d1cd2474 |
1155 | } |
| 1156 | |
| 1157 | |
| 1158 | //______________________________________________________________________________ |
| 1159 | void AliMUONSlatGeometryBuilder::SetTransformations() |
| 1160 | { |
| 2c9844e7 |
1161 | // Defines the transformations for the station345 chambers. |
| d1cd2474 |
1162 | // --- |
| eb1c3e3a |
1163 | |
| 1164 | if (gAlice->GetModule("DIPO")) { |
| 1165 | // if DIPO is preset, the whole station will be placed in DDIP volume |
| 1166 | SetMotherVolume(4, "DDIP"); |
| 1167 | SetMotherVolume(5, "DDIP"); |
| 1168 | SetVolume(4, "CH05", true); |
| 1169 | SetVolume(5, "CH06", true); |
| 1170 | } |
| 1171 | else { |
| 1172 | SetVolume(4, "CH05"); |
| 1173 | SetVolume(5, "CH06"); |
| c0404a6c |
1174 | } |
| 1175 | |
| 1176 | if (gAlice->GetModule("SHIL")) { |
| 1177 | SetMotherVolume(6, "YOUT2"); |
| 1178 | SetMotherVolume(7, "YOUT2"); |
| 1179 | SetMotherVolume(8, "YOUT2"); |
| 1180 | SetMotherVolume(9, "YOUT2"); |
| eb1c3e3a |
1181 | } |
| c0404a6c |
1182 | |
| eb1c3e3a |
1183 | SetVolume(6, "CH07"); |
| 1184 | SetVolume(7, "CH08"); |
| 1185 | SetVolume(8, "CH09"); |
| 1186 | SetVolume(9, "CH10"); |
| 1187 | |
| 2c9844e7 |
1188 | // Stations 345 are not perpendicular to the beam axis |
| 1189 | // See AliMUONConstants class |
| 1190 | TGeoRotation st345inclination("rot99"); |
| 1191 | st345inclination.RotateX(AliMUONConstants::St345Inclination()); |
| 1192 | |
| b7ef3c96 |
1193 | Double_t zpos1= - AliMUONConstants::DefaultChamberZ(4); |
| 2c9844e7 |
1194 | SetTransformation(4, TGeoTranslation(0., 0., zpos1), st345inclination); |
| b7ef3c96 |
1195 | |
| 1196 | zpos1= - AliMUONConstants::DefaultChamberZ(5); |
| 2c9844e7 |
1197 | SetTransformation(5, TGeoTranslation(0., 0., zpos1), st345inclination); |
| b7ef3c96 |
1198 | |
| 1199 | zpos1 = - AliMUONConstants::DefaultChamberZ(6); |
| 2c9844e7 |
1200 | SetTransformation(6, TGeoTranslation(0., 0., zpos1), st345inclination); |
| b7ef3c96 |
1201 | |
| 1202 | zpos1 = - AliMUONConstants::DefaultChamberZ(7); |
| 2c9844e7 |
1203 | SetTransformation(7, TGeoTranslation(0., 0., zpos1), st345inclination ); |
| b7ef3c96 |
1204 | |
| 1205 | zpos1 = - AliMUONConstants::DefaultChamberZ(8); |
| 2c9844e7 |
1206 | SetTransformation(8, TGeoTranslation(0., 0., zpos1), st345inclination); |
| b7ef3c96 |
1207 | |
| 1208 | zpos1 = - AliMUONConstants::DefaultChamberZ(9); |
| 2c9844e7 |
1209 | SetTransformation(9, TGeoTranslation(0., 0., zpos1), st345inclination); |
| d1cd2474 |
1210 | |
| 1211 | } |
| 1212 | |
| 1213 | //______________________________________________________________________________ |
| 1214 | void AliMUONSlatGeometryBuilder::SetSensitiveVolumes() |
| 1215 | { |
| 1216 | // Defines the sensitive volumes for slat stations chambers. |
| 1217 | // --- |
| 1218 | |
| e118b27e |
1219 | GetGeometry(4)->SetSensitiveVolume("S05G"); |
| 1220 | GetGeometry(5)->SetSensitiveVolume("S06G"); |
| 1221 | GetGeometry(6)->SetSensitiveVolume("S07G"); |
| 1222 | GetGeometry(7)->SetSensitiveVolume("S08G"); |
| 1223 | GetGeometry(8)->SetSensitiveVolume("S09G"); |
| 1224 | GetGeometry(9)->SetSensitiveVolume("S10G"); |
| d1cd2474 |
1225 | } |
| 1226 | |
| 1227 | //______________________________________________________________________________ |
| 1228 | Int_t AliMUONSlatGeometryBuilder::ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq) const |
| 1229 | { |
| 2057e0cc |
1230 | // On-line function establishing the correspondance between numslat (the slat number on a particular quadrant (numslat->0....4 for St3)) |
| 1231 | // and slatnum (the slat number on the whole panel (slatnum->1...18 for St3) |
| c10e6eaf |
1232 | numslat += 1; |
| 1233 | if (quadnum==2 || quadnum==3) |
| 1234 | numslat += fspq; |
| 1235 | else |
| 1236 | numslat = fspq + 2-numslat; |
| 1237 | numslat -= 1; |
| d1cd2474 |
1238 | |
| c10e6eaf |
1239 | if (quadnum==3 || quadnum==4) numslat += 2*fspq+1; |
| 1240 | |
| 1241 | return numslat; |
| d1cd2474 |
1242 | } |
git://git.uio.no / u / mrichter / AliRoot.git / blame