d1cd2474 |
1 | // $Id$ |
2 | // |
3 | // Class AliMUONSlatGeometryBuilder |
4 | // ------------------------------- |
5 | // Abstract base class for geometry construction per chamber. |
6 | // |
2057e0cc |
7 | // Author: Eric Dumonteil (dumontei@cea.fr) |
8 | |
9 | |
c10e6eaf |
10 | // This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves |
11 | // of the slats on the support panels. |
12 | // Those moves can be described with a simple set of parameters. The next step should be now to describe all |
13 | // the slats and their places by a unique |
14 | // class, which would make the SlatBuilder far more compact since now only three parameters can define a slat |
15 | // and its position, like: |
2057e0cc |
16 | // * Bool_t rounded_shape_slat |
17 | // * Float_t slat_length |
18 | // * Float_t slat_number or Float_t slat_position |
19 | |
d1cd2474 |
20 | #include <TVirtualMC.h> |
d1cd2474 |
21 | #include <TGeoMatrix.h> |
30178c30 |
22 | #include <Riostream.h> |
d1cd2474 |
23 | |
24 | #include "AliMUONSlatGeometryBuilder.h" |
25 | #include "AliMUON.h" |
26 | #include "AliMUONChamber.h" |
27 | #include "AliMUONChamberGeometry.h" |
a432117a |
28 | #include "AliMUONGeometryEnvelopeStore.h" |
e516b01d |
29 | #include "AliMUONConstants.h" |
30178c30 |
30 | #include "AliRun.h" |
8c343c7c |
31 | #include "AliLog.h" |
d1cd2474 |
32 | |
33 | ClassImp(AliMUONSlatGeometryBuilder) |
34 | |
d1cd2474 |
35 | |
36 | //______________________________________________________________________________ |
37 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon) |
a432117a |
38 | : AliMUONVGeometryBuilder("slat.dat", |
39 | &muon->Chamber(4), &muon->Chamber(5), |
30178c30 |
40 | &muon->Chamber(6), &muon->Chamber(7), |
41 | &muon->Chamber(8), &muon->Chamber(9)), |
d1cd2474 |
42 | fMUON(muon) |
43 | { |
44 | // Standard constructor |
45 | |
46 | } |
47 | |
48 | //______________________________________________________________________________ |
49 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder() |
50 | : AliMUONVGeometryBuilder(), |
51 | fMUON(0) |
52 | { |
53 | // Default constructor |
54 | } |
55 | |
56 | |
57 | //______________________________________________________________________________ |
58 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(const AliMUONSlatGeometryBuilder& rhs) |
59 | : AliMUONVGeometryBuilder(rhs) |
60 | { |
8c343c7c |
61 | AliFatal("Copy constructor is not implemented."); |
d1cd2474 |
62 | } |
63 | |
64 | //______________________________________________________________________________ |
65 | AliMUONSlatGeometryBuilder::~AliMUONSlatGeometryBuilder() { |
66 | // |
67 | } |
68 | |
69 | //______________________________________________________________________________ |
70 | AliMUONSlatGeometryBuilder& |
71 | AliMUONSlatGeometryBuilder::operator = (const AliMUONSlatGeometryBuilder& rhs) |
72 | { |
73 | // check assignement to self |
74 | if (this == &rhs) return *this; |
75 | |
8c343c7c |
76 | AliFatal("Assignment operator is not implemented."); |
d1cd2474 |
77 | |
78 | return *this; |
79 | } |
80 | |
81 | // |
82 | // public methods |
83 | // |
84 | |
85 | //______________________________________________________________________________ |
86 | void AliMUONSlatGeometryBuilder::CreateGeometry() |
87 | { |
e516b01d |
88 | // CreateGeometry is the method containing all the informations concerning Stations 345 geometry. |
89 | // It includes description and placements of support panels and slats. |
90 | // The code comes directly from what was written in AliMUONv1.cxx before, with modifications concerning |
91 | // the use of Enveloppe method to place the Geant volumes. |
92 | // Now, few changes would allow the creation of a Slat methode where slat could be described by few parameters, |
93 | // and this builder would then be dedicated only to the |
94 | // placements of the slats. Those modifications could shorten the Station 345 geometry by a non-negligeable factor... |
d1cd2474 |
95 | |
e516b01d |
96 | Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099; |
97 | |
98 | Float_t angle; |
99 | Float_t *dum=0; |
100 | |
101 | // define the id of tracking media: |
102 | Int_t idAir = idtmed[1100]; // medium 1 |
103 | Int_t idGas = idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%) |
104 | Int_t idCopper = idtmed[1110]; |
105 | Int_t idG10 = idtmed[1111]; |
106 | Int_t idCarbon = idtmed[1112]; |
107 | Int_t idRoha = idtmed[1113]; |
108 | Int_t idNomex = idtmed[1114]; // honey comb |
109 | Int_t idNoryl = idtmed[1115]; |
110 | Int_t idNomexB = idtmed[1116]; // bulk material |
111 | |
112 | // sensitive area: 40*40 cm**2 |
113 | const Float_t kSensLength = 40.; |
114 | const Float_t kSensHeight = 40.; |
115 | const Float_t kSensWidth = 0.5; // according to TDR fig 2.120 |
116 | const Int_t kSensMaterial = idGas; |
117 | // const Float_t kYoverlap = 1.5; |
118 | |
119 | // PCB dimensions in cm; width: 30 mum copper |
120 | const Float_t kPcbLength = kSensLength; |
121 | const Float_t kPcbHeight = 58.; // updated Ch. Finck |
122 | const Float_t kPcbWidth = 0.003; |
123 | const Int_t kPcbMaterial = idCopper; |
124 | |
125 | // Insulating material: 220 mum G10 fiber glued to pcb |
126 | const Float_t kInsuLength = kPcbLength; |
127 | const Float_t kInsuHeight = kPcbHeight; |
128 | const Float_t kInsuWidth = 0.022; // updated Ch. Finck |
129 | const Int_t kInsuMaterial = idG10; |
130 | |
131 | // Carbon fiber panels: 200mum carbon/epoxy skin |
132 | const Float_t kCarbonWidth = 0.020; |
133 | const Int_t kCarbonMaterial = idCarbon; |
134 | |
135 | // Nomex (honey comb) between the two panel carbon skins |
136 | const Float_t kNomexLength = kSensLength; |
137 | const Float_t kNomexHeight = kSensHeight; |
138 | const Float_t kNomexWidth = 0.8; // updated Ch. Finck |
139 | const Int_t kNomexMaterial = idNomex; |
140 | |
141 | // Bulk Nomex under panel sandwich Ch. Finck |
142 | const Float_t kNomexBWidth = 0.025; |
143 | const Int_t kNomexBMaterial = idNomexB; |
144 | |
145 | // Panel sandwich 0.02 carbon*2 + 0.8 nomex |
146 | const Float_t kPanelLength = kSensLength; |
147 | const Float_t kPanelHeight = kSensHeight; |
148 | const Float_t kPanelWidth = 2 * kCarbonWidth + kNomexWidth; |
149 | |
150 | // spacer around the slat: 2 sticks along length,2 along height |
151 | // H: the horizontal ones |
152 | const Float_t kHframeLength = kPcbLength; |
153 | const Float_t kHframeHeight = 1.95; // updated Ch. Finck |
154 | const Float_t kHframeWidth = kSensWidth; |
155 | const Int_t kHframeMaterial = idNoryl; |
156 | |
157 | // V: the vertical ones; vertical spacers |
158 | const Float_t kVframeLength = 2.5; |
159 | const Float_t kVframeHeight = kSensHeight + kHframeHeight; |
160 | const Float_t kVframeWidth = kSensWidth; |
161 | const Int_t kVframeMaterial = idNoryl; |
162 | |
163 | // B: the horizontal border filled with rohacell: ok Ch. Finck |
164 | const Float_t kBframeLength = kHframeLength; |
165 | const Float_t kBframeHeight = (kPcbHeight - kSensHeight)/2. - kHframeHeight; |
166 | const Float_t kBframeWidth = kHframeWidth; |
167 | const Int_t kBframeMaterial = idRoha; |
168 | |
169 | // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) for electronics |
170 | const Float_t kNulocLength = 2.5; |
171 | const Float_t kNulocHeight = kBframeHeight; |
172 | const Float_t kNulocWidth = 0.0030 + 0.0014; // equivalent copper width of vetronite; |
173 | const Int_t kNulocMaterial = idCopper; |
174 | |
175 | // Slat parameters |
176 | const Float_t kSlatHeight = kPcbHeight; |
177 | const Float_t kSlatWidth = kSensWidth + 2.*(kPcbWidth + kInsuWidth + kPanelWidth |
178 | + kNomexBWidth); //replaced rohacell with Nomex Ch. Finck |
179 | const Int_t kSlatMaterial = idAir; |
180 | const Float_t kDslatLength = -1.25; // position of the slat respect to the beam plane (half vertical spacer) Ch. Finck |
181 | Float_t zSlat = AliMUONConstants::DzSlat();// implemented Ch. Finck |
182 | Float_t dzCh = AliMUONConstants::DzCh(); |
183 | |
184 | Float_t spar[3]; |
185 | Int_t i, j; |
186 | Int_t detElemId; |
187 | |
188 | // the panel volume contains the nomex |
189 | Float_t panelpar[3] = { kPanelLength/2., kPanelHeight/2., kPanelWidth/2. }; |
190 | Float_t nomexpar[3] = { kNomexLength/2., kNomexHeight/2., kNomexWidth/2. }; |
191 | Float_t twidth = kPanelWidth + kNomexBWidth; |
192 | Float_t nomexbpar[3] = {kNomexLength/2., kNomexHeight/2.,twidth/2. };// bulk nomex |
193 | |
194 | // insulating material contains PCB-> gas |
195 | twidth = 2*(kInsuWidth + kPcbWidth) + kSensWidth ; |
196 | Float_t insupar[3] = {kInsuLength/2., kInsuHeight/2., twidth/2. }; |
197 | twidth -= 2 * kInsuWidth; |
198 | Float_t pcbpar[3] = {kPcbLength/2., kPcbHeight/2., twidth/2. }; |
199 | Float_t senspar[3] = {kSensLength/2., kSensHeight/2., kSensWidth/2. }; |
200 | Float_t theight = 2 * kHframeHeight + kSensHeight; |
201 | Float_t hFramepar[3] = {kHframeLength/2., theight/2., kHframeWidth/2.}; |
202 | Float_t bFramepar[3] = {kBframeLength/2., kBframeHeight/2., kBframeWidth/2.}; |
203 | Float_t vFramepar[3] = {kVframeLength/2., kVframeHeight/2., kVframeWidth/2.}; |
204 | Float_t nulocpar[3] = {kNulocLength/2., kNulocHeight/2., kNulocWidth/2.}; |
205 | |
206 | Float_t xx; |
207 | Float_t xxmax = (kBframeLength - kNulocLength)/2.; |
208 | Int_t index=0; |
d1cd2474 |
209 | |
e516b01d |
210 | AliMUONChamber *iChamber, *iChamber1, *iChamber2; |
d12a7158 |
211 | |
e516b01d |
212 | Int_t* fStations = new Int_t[5]; |
213 | for (Int_t i=0; i<5; i++) fStations[i] = 1; |
214 | fStations[2] = 1; |
215 | |
216 | if (fStations[2]) |
d1cd2474 |
217 | { |
e516b01d |
218 | //******************************************************************** |
219 | // Station 3 ** |
220 | //******************************************************************** |
221 | // indices 1 and 2 for first and second chambers in the station |
222 | // iChamber (first chamber) kept for other quanties than Z, |
223 | // assumed to be the same in both chambers |
224 | |
225 | iChamber = GetChamber(4); |
226 | iChamber1 = iChamber; |
227 | iChamber2 = GetChamber(5); |
d1cd2474 |
228 | |
e516b01d |
229 | //iChamber1->GetGeometry()->SetDebug(kTRUE); |
230 | //iChamber2->GetGeometry()->SetDebug(kTRUE); |
231 | |
232 | if (gAlice->GetModule("DIPO")) { |
233 | // if DIPO is preset, the whole station will be placed in DDIP volume |
234 | iChamber1->GetGeometry()->SetMotherVolume("DDIP"); |
235 | iChamber2->GetGeometry()->SetMotherVolume("DDIP"); |
236 | } |
237 | |
238 | |
239 | // volumes for slat geometry (xx=5,..,10 chamber id): |
240 | // Sxx0 Sxx1 Sxx2 Sxx3 --> Slat Mother volumes |
241 | // SxxG --> Sensitive volume (gas) |
242 | // SxxP --> PCB (copper) |
243 | // SxxI --> Insulator (G10) |
244 | // SxxC --> Carbon panel |
245 | // SxxN --> Nomex comb |
246 | // SxxX --> Nomex bulk |
247 | // SxxH, SxxV --> Horizontal and Vertical frames (Noryl) |
248 | // SB5x --> Volumes for the 35 cm long PCB |
249 | // slat dimensions: slat is a MOTHER volume!!! made of air |
250 | |
251 | // only for chamber 5: slat 1 has a PCB shorter by 5cm! |
252 | |
253 | Float_t tlength = 35.; |
254 | Float_t panelpar2[3] = { tlength/2., panelpar[1], panelpar[2]}; |
255 | Float_t nomexpar2[3] = { tlength/2., nomexpar[1], nomexpar[2]}; |
256 | Float_t nomexbpar2[3] = { tlength/2., nomexbpar[1], nomexbpar[2]}; |
257 | Float_t insupar2[3] = { tlength/2., insupar[1], insupar[2]}; |
258 | Float_t pcbpar2[3] = { tlength/2., pcbpar[1], pcbpar[2]}; |
259 | Float_t senspar2[3] = { tlength/2., senspar[1], senspar[2]}; |
260 | Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]}; |
261 | Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]}; |
262 | Float_t *dum=0; |
263 | Float_t pcbDLength3 = (kPcbLength - tlength); |
264 | |
265 | const Int_t kNslats3 = 5; // number of slats per quadrant |
266 | const Int_t kNPCB3[kNslats3] = {4, 4, 4, 3, 2}; // n PCB per slat |
267 | const Float_t kXpos3[kNslats3] = {0., 0., 0., 0., 0.};//{31., 0., 0., 0., 0.}; |
268 | const Float_t kYpos3[kNslats3] = {0, 37.8, 37.7, 37.3, 33.7}; |
269 | Float_t slatLength3[kNslats3]; |
270 | |
271 | // create and position the slat (mother) volumes |
272 | |
273 | char idSlatCh5[5]; |
274 | char idSlatCh6[5]; |
275 | Float_t xSlat3; |
276 | Float_t ySlat3 = 0; |
277 | Float_t angle = 0.; |
278 | Float_t spar2[3]; |
279 | for (i = 0; i < kNslats3; i++){ |
280 | |
281 | slatLength3[i] = kPcbLength * kNPCB3[i] + 2.* kVframeLength; |
282 | xSlat3 = slatLength3[i]/2. + kDslatLength + kXpos3[i]; |
283 | ySlat3 += kYpos3[i]; |
284 | |
285 | spar[0] = slatLength3[i]/2.; |
286 | spar[1] = kSlatHeight/2.; |
287 | spar[2] = kSlatWidth/2.; |
288 | // take away 5 cm from the first slat in chamber 5 |
7ddb761c |
289 | if (i == 0 || i == 1 || i == 2) { // 1 pcb is shortened by 5cm |
e516b01d |
290 | spar2[0] = spar[0] - pcbDLength3/2.; |
291 | } else { |
292 | spar2[0] = spar[0]; |
293 | } |
294 | spar2[1] = spar[1]; |
295 | spar2[2] = spar[2]; |
296 | Float_t dzCh3 = dzCh; |
297 | Float_t zSlat3 = (i%2 ==0)? -zSlat : zSlat; // seems not that zSlat3 = zSlat4 & 5 refering to plan PQ7EN345-6 ? |
298 | |
299 | sprintf(idSlatCh5,"LA%d",kNslats3-1+i); |
300 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
301 | detElemId = 500 + i + kNslats3-1; |
302 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3), |
303 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
304 | |
305 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2+i); |
306 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
307 | detElemId = 550 + i + kNslats3-1; |
308 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3), |
309 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
310 | |
311 | if (i > 0) { |
312 | sprintf(idSlatCh5,"LA%d",kNslats3-1-i); |
313 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
314 | detElemId = 500 - i + kNslats3-1; |
315 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3), |
316 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
317 | |
318 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2-i); |
319 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
320 | detElemId = 550 - i + kNslats3-1; |
321 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3), |
322 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
323 | } |
324 | |
325 | sprintf(idSlatCh6,"LB%d",kNslats3-1+i); |
326 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
327 | detElemId = 600 + i + kNslats3-1; |
328 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3), |
329 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
330 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2+i); |
331 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
332 | detElemId = 650 + i + kNslats3-1; |
333 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3), |
334 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
335 | |
336 | if (i > 0) { |
337 | sprintf(idSlatCh6,"LB%d",kNslats3-1-i); |
338 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
339 | detElemId = 600 - i + kNslats3-1; |
340 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3), |
341 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
342 | |
343 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2-i); |
344 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
345 | detElemId = 650 - i + kNslats3-1; |
346 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3), |
347 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
348 | } |
349 | } |
d1cd2474 |
350 | |
e516b01d |
351 | // create the panel volume |
d1cd2474 |
352 | |
e516b01d |
353 | gMC->Gsvolu("S05C","BOX",kCarbonMaterial,panelpar,3); |
354 | gMC->Gsvolu("SB5C","BOX",kCarbonMaterial,panelpar2,3); |
355 | gMC->Gsvolu("S06C","BOX",kCarbonMaterial,panelpar,3); |
4846c3ab |
356 | |
e516b01d |
357 | // create the nomex volume (honey comb) |
d1cd2474 |
358 | |
e516b01d |
359 | gMC->Gsvolu("S05N","BOX",kNomexMaterial,nomexpar,3); |
360 | gMC->Gsvolu("SB5N","BOX",kNomexMaterial,nomexpar2,3); |
361 | gMC->Gsvolu("S06N","BOX",kNomexMaterial,nomexpar,3); |
4846c3ab |
362 | |
e516b01d |
363 | // create the nomex volume (bulk) |
364 | |
365 | gMC->Gsvolu("S05X","BOX",kNomexBMaterial,nomexbpar,3); |
366 | gMC->Gsvolu("SB5X","BOX",kNomexBMaterial,nomexbpar2,3); |
367 | gMC->Gsvolu("S06X","BOX",kNomexBMaterial,nomexbpar,3); |
d1cd2474 |
368 | |
e516b01d |
369 | // create the insulating material volume |
370 | |
371 | gMC->Gsvolu("S05I","BOX",kInsuMaterial,insupar,3); |
372 | gMC->Gsvolu("SB5I","BOX",kInsuMaterial,insupar2,3); |
373 | gMC->Gsvolu("S06I","BOX",kInsuMaterial,insupar,3); |
4846c3ab |
374 | |
e516b01d |
375 | // create the PCB volume |
d1cd2474 |
376 | |
e516b01d |
377 | gMC->Gsvolu("S05P","BOX",kPcbMaterial,pcbpar,3); |
378 | gMC->Gsvolu("SB5P","BOX",kPcbMaterial,pcbpar2,3); |
379 | gMC->Gsvolu("S06P","BOX",kPcbMaterial,pcbpar,3); |
d1cd2474 |
380 | |
e516b01d |
381 | // create the sensitive volumes, |
4846c3ab |
382 | |
e516b01d |
383 | gMC->Gsvolu("S05G","BOX",kSensMaterial,dum,0); |
384 | gMC->Gsvolu("S06G","BOX",kSensMaterial,dum,0); |
d1cd2474 |
385 | |
e516b01d |
386 | // create the vertical frame volume |
d1cd2474 |
387 | |
e516b01d |
388 | gMC->Gsvolu("S05V","BOX",kVframeMaterial,vFramepar,3); |
389 | gMC->Gsvolu("S06V","BOX",kVframeMaterial,vFramepar,3); |
d1cd2474 |
390 | |
e516b01d |
391 | // create the horizontal frame volume |
d1cd2474 |
392 | |
e516b01d |
393 | gMC->Gsvolu("S05H","BOX",kHframeMaterial,hFramepar,3); |
394 | gMC->Gsvolu("SB5H","BOX",kHframeMaterial,hFramepar2,3); |
395 | gMC->Gsvolu("S06H","BOX",kHframeMaterial,hFramepar,3); |
4846c3ab |
396 | |
e516b01d |
397 | // create the horizontal border volume |
d1cd2474 |
398 | |
e516b01d |
399 | gMC->Gsvolu("S05B","BOX",kBframeMaterial,bFramepar,3); |
400 | gMC->Gsvolu("SB5B","BOX",kBframeMaterial,bFramepar2,3); |
401 | gMC->Gsvolu("S06B","BOX",kBframeMaterial,bFramepar,3); |
4846c3ab |
402 | |
e516b01d |
403 | index = 0; |
404 | for (i = 0; i<kNslats3; i++){ |
405 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
406 | |
407 | if (i == 0 && quadrant == 2) continue; |
408 | if (i == 0 && quadrant == 4) continue; |
409 | |
410 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(i,quadrant,kNslats3-1)); |
411 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(i,quadrant,kNslats3-1)); |
412 | Float_t xvFrame = (slatLength3[i] - kVframeLength)/2.; |
413 | Float_t xvFrame2 = xvFrame; |
414 | |
415 | if (i == 0 || i == 1 || i == 2) xvFrame2 -= pcbDLength3/2.; |
416 | |
417 | // position the vertical frames |
418 | if ( i > 2) { |
419 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
420 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
421 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
422 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
423 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
424 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
425 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
426 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
427 | } |
428 | |
429 | if (i == 2) { |
430 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
431 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); |
432 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
433 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
434 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
435 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
436 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
437 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
438 | } |
439 | |
440 | if (i == 0 || i == 1) { // no rounded spacer for the moment (Ch. Finck) |
441 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
442 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); |
443 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
444 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
445 | } |
446 | |
447 | // position the panels and the insulating material |
448 | for (j = 0; j < kNPCB3[i]; j++){ |
449 | if (i == 1 && j == 0) continue; |
450 | if (i == 0 && j == 0) continue; |
451 | index++; |
452 | Float_t xx = kSensLength * (-kNPCB3[i]/2. + j + 0.5); |
453 | Float_t xx2 = xx - pcbDLength3/2.; |
d1cd2474 |
454 | |
e516b01d |
455 | Float_t zPanel = spar[2] - nomexbpar[2]; |
456 | |
457 | if ( (i == 0 || i == 1 || i == 2) && j == kNPCB3[i]-1) { // 1 pcb is shortened by 5cm |
458 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index-1,TGeoTranslation(xx2,0.,zPanel)); |
459 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index,TGeoTranslation(xx2,0.,-zPanel)); |
460 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5I", idSlatCh5, index,TGeoTranslation(xx2,0.,0.)); |
461 | } else { |
462 | GetEnvelopes(4)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
463 | GetEnvelopes(4)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
464 | GetEnvelopes(4)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx,0.,0.)); |
465 | } |
466 | GetEnvelopes(5)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
467 | GetEnvelopes(5)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
468 | GetEnvelopes(5)->AddEnvelopeConstituent("S06I", idSlatCh6, index,TGeoTranslation(xx,0.,0.)); |
d1cd2474 |
469 | |
e516b01d |
470 | } |
471 | } |
472 | } |
473 | |
474 | // position the nomex volume inside the panel volume |
475 | gMC->Gspos("S05N",1,"S05C",0.,0.,0.,0,"ONLY"); |
476 | gMC->Gspos("SB5N",1,"SB5C",0.,0.,0.,0,"ONLY"); |
477 | gMC->Gspos("S06N",1,"S06C",0.,0.,0.,0,"ONLY"); |
4846c3ab |
478 | |
e516b01d |
479 | // position panel volume inside the bulk nomex material volume |
480 | gMC->Gspos("S05C",1,"S05X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
481 | gMC->Gspos("SB5C",1,"SB5X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
482 | gMC->Gspos("S06C",1,"S06X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
483 | |
484 | // position the PCB volume inside the insulating material volume |
485 | gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY"); |
486 | gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY"); |
487 | gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY"); |
4846c3ab |
488 | |
e516b01d |
489 | // position the horizontal frame volume inside the PCB volume |
490 | gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY"); |
491 | gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY"); |
492 | gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY"); |
4846c3ab |
493 | |
e516b01d |
494 | // position the sensitive volume inside the horizontal frame volume |
495 | gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3); |
496 | gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3); |
497 | gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3); |
4846c3ab |
498 | |
499 | |
e516b01d |
500 | // position the border volumes inside the PCB volume |
501 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
502 | gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY"); |
503 | gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY"); |
504 | gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY"); |
505 | gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY"); |
506 | |
507 | gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY"); |
508 | gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY"); |
4846c3ab |
509 | |
e516b01d |
510 | // create the NULOC volume and position it in the horizontal frame |
511 | gMC->Gsvolu("S05E","BOX",kNulocMaterial,nulocpar,3); |
512 | gMC->Gsvolu("S06E","BOX",kNulocMaterial,nulocpar,3); |
513 | index = 0; |
514 | Float_t xxmax2 = xxmax - pcbDLength3/2.; |
515 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
516 | index++; |
517 | gMC->Gspos("S05E",2*index-1,"S05B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
518 | gMC->Gspos("S05E",2*index ,"S05B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
519 | gMC->Gspos("S06E",2*index-1,"S06B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
520 | gMC->Gspos("S06E",2*index ,"S06B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY"); |
521 | if (xx > -xxmax2 && xx< xxmax2) { |
522 | gMC->Gspos("S05E",2*index-1,"SB5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY"); |
523 | gMC->Gspos("S05E",2*index ,"SB5B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY"); |
524 | } |
525 | } |
526 | |
527 | // position the volumes approximating the circular section of the pipe |
528 | Float_t epsilon = 0.001; |
529 | Int_t ndiv = 6; |
530 | Int_t imax = 1; |
531 | Double_t divpar[3]; |
532 | Double_t dydiv = kSensHeight/ndiv; |
533 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
534 | Double_t rmin = 31.5; // Corrected in sep04 from PQ-LAT-SR2 de CEA-DSM-DAPNIA-SIS/BE ph HARDY 19-Oct-2002 slat |
535 | Double_t xdiv = 0.; |
536 | Float_t xvol; |
537 | Float_t yvol; |
538 | |
539 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
540 | ydiv += dydiv; |
541 | xdiv = 0.; |
542 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
543 | divpar[0] = (kPcbLength - xdiv)/2.; |
544 | divpar[1] = dydiv/2. - epsilon; |
545 | divpar[2] = kSensWidth/2.; |
546 | xvol = (kPcbLength + xdiv)/2.; |
547 | yvol = ydiv; |
548 | |
549 | // Volumes close to the beam pipe for slat i=1 so 4 slats per chamber |
550 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
551 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(1,quadrant,kNslats3-1)); |
552 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(1,quadrant,kNslats3-1)); |
553 | |
554 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5, quadrant*100+imax+4*idiv+1, |
555 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[1]/2.),yvol-kPcbLength,0.),3,divpar); |
556 | |
557 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6, quadrant*100+imax+4*idiv+1, |
558 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[1]/2.),yvol-kPcbLength,0.),3,divpar); |
559 | } |
560 | } |
561 | |
562 | // Volumes close to the beam pipe for slat i=0 so 2 slats per chamber (central slat for station 3) |
563 | // Gines Martinez, Subatech sep 04 |
564 | // 9 box volumes are used to define the PCB closed to the beam pipe of the slat 122000SR1 of chamber 5 and 6 of St3 |
565 | // Accordingly to plan PQ-LAT-SR1 of CEA-DSM-DAPNIA-SIS/BE ph HARDY 8-Oct-2002 |
566 | // Rmin = 31.5 cm |
567 | rmin = 31.5; //in cm |
568 | ndiv = 9; |
569 | dydiv = kSensHeight/ndiv; // Vertical size of the box volume approximating the rounded PCB |
570 | ydiv = -kSensHeight/2 + dydiv/2.; // Initializing vertical position of the volume from bottom |
571 | xdiv = 0.; // Initializing horizontal position of the box volumes |
572 | |
573 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
574 | xdiv = TMath::Abs( rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ) ); |
575 | divpar[0] = (kPcbLength - xdiv)/2.; // Dimension of the box volume |
576 | divpar[1] = dydiv/2. - epsilon; |
577 | divpar[2] = kSensWidth/2.; |
578 | xvol = (kPcbLength + xdiv)/2.; //2D traslition for positionning of box volume |
579 | yvol = ydiv; |
580 | Int_t side; |
581 | for (side = 1; side <= 2; side++) { |
582 | sprintf(idSlatCh5,"LA%d",4); |
583 | sprintf(idSlatCh6,"LB%d",4); |
584 | if(side == 2) { |
585 | sprintf(idSlatCh5,"LA%d",13); |
586 | sprintf(idSlatCh6,"LB%d",13); |
587 | } |
588 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5,500+side*100+imax+4*idiv+1, |
589 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[0]/2.),yvol,0.),3,divpar); |
590 | |
591 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6,500+side*100+imax+4*idiv+1, |
592 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[0]/2.),yvol,0.),3,divpar); |
593 | } |
594 | ydiv += dydiv; // Going from bottom to top |
595 | } |
596 | // cout << "Geometry for Station 3...... done" << endl; |
d1cd2474 |
597 | } |
598 | |
e516b01d |
599 | if (fStations[3]) { |
d1cd2474 |
600 | |
601 | |
e516b01d |
602 | // //******************************************************************** |
603 | // // Station 4 ** |
604 | // //******************************************************************** |
605 | // // indices 1 and 2 for first and second chambers in the station |
606 | // // iChamber (first chamber) kept for other quanties than Z, |
607 | // // assumed to be the same in both chambers |
608 | // corrected geometry (JP. Cussonneau, Ch. Finck) |
d1cd2474 |
609 | |
e516b01d |
610 | iChamber = GetChamber(6); |
611 | iChamber1 = iChamber; |
612 | iChamber2 = GetChamber(7); |
613 | |
614 | const Int_t kNslats4 = 7; // number of slats per quadrant |
615 | const Int_t kNPCB4[kNslats4] = {5, 6, 5, 5, 4, 3, 2}; // n PCB per slat |
616 | const Float_t kXpos4[kNslats4] = {38.2, 0., 0., 0., 0., 0., 0.}; |
617 | const Float_t kYpos41[kNslats4] = {0., 38.2, 34.40, 36.60, 29.3, 37.0, 28.6}; |
618 | const Float_t kYpos42[kNslats4] = {0., 38.2, 37.85, 37.55, 29.4, 37.0, 28.6}; |
619 | |
620 | Float_t slatLength4[kNslats4]; |
621 | |
622 | // create and position the slat (mother) volumes |
623 | |
624 | char idSlatCh7[5]; |
625 | char idSlatCh8[5]; |
626 | Float_t xSlat4; |
627 | Float_t ySlat41 = 0; |
628 | Float_t ySlat42 = 0; |
629 | |
630 | angle = 0.; |
631 | |
632 | for (i = 0; i<kNslats4; i++){ |
633 | slatLength4[i] = kPcbLength * kNPCB4[i] + 2. * kVframeLength; |
634 | xSlat4 = slatLength4[i]/2. + kDslatLength + kXpos4[i]; |
635 | ySlat41 += kYpos41[i]; |
636 | ySlat42 += kYpos42[i]; |
637 | |
638 | spar[0] = slatLength4[i]/2.; |
639 | spar[1] = kSlatHeight/2.; |
640 | spar[2] = kSlatWidth/2.; |
641 | Float_t dzCh4 = dzCh; |
642 | Float_t zSlat4 = (i%2 ==0)? -zSlat : zSlat; |
643 | |
644 | sprintf(idSlatCh7,"LC%d",kNslats4-1+i); |
645 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
646 | detElemId = 700 + i + kNslats4-1; |
647 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4), |
648 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
649 | |
650 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2+i); |
651 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
652 | detElemId = 750 + i + kNslats4-1; |
653 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4), |
654 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
d1cd2474 |
655 | |
e516b01d |
656 | if (i > 0) { |
657 | sprintf(idSlatCh7,"LC%d",kNslats4-1-i); |
658 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
659 | detElemId = 700 - i + kNslats4-1; |
660 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4), |
661 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
662 | |
663 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2-i); |
664 | detElemId = 750 - i + kNslats4-1; |
665 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
666 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, |
667 | TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4), |
668 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
669 | } |
670 | |
671 | sprintf(idSlatCh8,"LD%d",kNslats4-1+i); |
672 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
673 | detElemId = 800 + i + kNslats4-1; |
674 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4), |
675 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
676 | |
677 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2+i); |
678 | detElemId = 850 + i + kNslats4-1; |
679 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
680 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4), |
681 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
682 | if (i > 0) { |
683 | sprintf(idSlatCh8,"LD%d",kNslats4-1-i); |
684 | detElemId = 800 - i + kNslats4-1; |
685 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
686 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4), |
687 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
688 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2-i); |
689 | detElemId = 850 - i + kNslats4-1; |
690 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
691 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4), |
692 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
693 | } |
694 | } |
d1cd2474 |
695 | |
e516b01d |
696 | // create the panel volume |
d1cd2474 |
697 | |
e516b01d |
698 | gMC->Gsvolu("S07C","BOX",kCarbonMaterial,panelpar,3); |
699 | gMC->Gsvolu("S08C","BOX",kCarbonMaterial,panelpar,3); |
d1cd2474 |
700 | |
e516b01d |
701 | // create the nomex volume |
d1cd2474 |
702 | |
e516b01d |
703 | gMC->Gsvolu("S07N","BOX",kNomexMaterial,nomexpar,3); |
704 | gMC->Gsvolu("S08N","BOX",kNomexMaterial,nomexpar,3); |
d1cd2474 |
705 | |
d1cd2474 |
706 | |
e516b01d |
707 | // create the nomex volume (bulk) |
d1cd2474 |
708 | |
e516b01d |
709 | gMC->Gsvolu("S07X","BOX",kNomexBMaterial,nomexbpar,3); |
710 | gMC->Gsvolu("S08X","BOX",kNomexBMaterial,nomexbpar,3); |
d1cd2474 |
711 | |
e516b01d |
712 | // create the insulating material volume |
713 | |
714 | gMC->Gsvolu("S07I","BOX",kInsuMaterial,insupar,3); |
715 | gMC->Gsvolu("S08I","BOX",kInsuMaterial,insupar,3); |
716 | |
717 | // create the PCB volume |
718 | |
719 | gMC->Gsvolu("S07P","BOX",kPcbMaterial,pcbpar,3); |
720 | gMC->Gsvolu("S08P","BOX",kPcbMaterial,pcbpar,3); |
d1cd2474 |
721 | |
e516b01d |
722 | // create the sensitive volumes, |
723 | |
724 | gMC->Gsvolu("S07G","BOX",kSensMaterial,dum,0); |
725 | gMC->Gsvolu("S08G","BOX",kSensMaterial,dum,0); |
726 | |
727 | // create the vertical frame volume |
728 | |
729 | gMC->Gsvolu("S07V","BOX",kVframeMaterial,vFramepar,3); |
730 | gMC->Gsvolu("S08V","BOX",kVframeMaterial,vFramepar,3); |
731 | |
732 | // create the horizontal frame volume |
733 | |
734 | gMC->Gsvolu("S07H","BOX",kHframeMaterial,hFramepar,3); |
735 | gMC->Gsvolu("S08H","BOX",kHframeMaterial,hFramepar,3); |
736 | |
737 | // create the horizontal border volume |
738 | |
739 | gMC->Gsvolu("S07B","BOX",kBframeMaterial,bFramepar,3); |
740 | gMC->Gsvolu("S08B","BOX",kBframeMaterial,bFramepar,3); |
741 | |
742 | index = 0; |
743 | for (i = 0; i < kNslats4; i++){ |
744 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
745 | |
746 | if (i == 0 && quadrant == 2) continue; |
747 | if (i == 0 && quadrant == 4) continue; |
748 | |
749 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(i,quadrant,kNslats4-1)); |
750 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(i,quadrant,kNslats4-1)); |
751 | Float_t xvFrame = (slatLength4[i] - kVframeLength)/2.; |
752 | |
753 | // position the vertical frames |
754 | if (i != 1) { |
755 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
756 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
757 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
758 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
759 | } else { // no rounded spacer yet |
760 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
761 | // GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
762 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
763 | // GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
764 | } |
765 | // position the panels and the insulating material |
766 | for (j = 0; j < kNPCB4[i]; j++){ |
767 | if (i == 1 && j == 0) continue; |
768 | index++; |
769 | Float_t xx = kSensLength * (-kNPCB4[i]/2.+j+.5); |
770 | |
771 | Float_t zPanel = spar[2] - nomexbpar[2]; |
772 | GetEnvelopes(6)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
773 | GetEnvelopes(6)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
774 | GetEnvelopes(6)->AddEnvelopeConstituent("S07I", idSlatCh7, index,TGeoTranslation(xx,0.,0.)); |
775 | GetEnvelopes(7)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
776 | GetEnvelopes(7)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
777 | GetEnvelopes(7)->AddEnvelopeConstituent("S08I", idSlatCh8, index,TGeoTranslation(xx,0.,0.)); |
778 | } |
779 | } |
780 | } |
781 | |
782 | // position the nomex volume inside the panel volume |
783 | gMC->Gspos("S07N",1,"S07C",0.,0.,0.,0,"ONLY"); |
784 | gMC->Gspos("S08N",1,"S08C",0.,0.,0.,0,"ONLY"); |
785 | |
786 | // position panel volume inside the bulk nomex material volume |
787 | gMC->Gspos("S07C",1,"S07X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
788 | gMC->Gspos("S08C",1,"S08X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
789 | |
790 | // position the PCB volume inside the insulating material volume |
791 | gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY"); |
792 | gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY"); |
793 | |
794 | // position the horizontal frame volume inside the PCB volume |
795 | gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY"); |
796 | gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY"); |
797 | |
798 | // position the sensitive volume inside the horizontal frame volume |
799 | gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3); |
800 | gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3); |
801 | |
802 | // position the border volumes inside the PCB volume |
803 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
804 | gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY"); |
805 | gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY"); |
806 | gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY"); |
807 | gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY"); |
808 | |
809 | // create the NULOC volume and position it in the horizontal frame |
810 | |
811 | gMC->Gsvolu("S07E","BOX",kNulocMaterial,nulocpar,3); |
812 | gMC->Gsvolu("S08E","BOX",kNulocMaterial,nulocpar,3); |
813 | index = 0; |
814 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
815 | index++; |
816 | gMC->Gspos("S07E",2*index-1,"S07B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
817 | gMC->Gspos("S07E",2*index ,"S07B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
818 | gMC->Gspos("S08E",2*index-1,"S08B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
819 | gMC->Gspos("S08E",2*index ,"S08B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
820 | } |
821 | |
822 | // position the volumes approximating the circular section of the pipe |
823 | |
824 | Float_t epsilon = 0.001; |
825 | Int_t ndiv = 10; |
826 | Int_t imax = 1; |
827 | Double_t divpar[3]; |
828 | Double_t dydiv = kSensHeight/ndiv; |
829 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
830 | Float_t rmin = 39.5;// Corrected in sep04 from PQ-LAT-NR3 de CEA-DSM-DAPNIA-SIS/BE ph HARDY 19-Oct-2002 slat |
831 | Float_t xdiv = 0.; |
832 | Float_t xvol; |
833 | Float_t yvol; |
834 | |
835 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
836 | ydiv += dydiv; |
837 | xdiv = 0.; |
838 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
839 | divpar[0] = (kPcbLength - xdiv)/2.; |
840 | divpar[1] = dydiv/2. - epsilon; |
841 | divpar[2] = kSensWidth/2.; |
842 | xvol = (kPcbLength + xdiv)/2.; |
843 | yvol = ydiv ; |
6296ba34 |
844 | |
e516b01d |
845 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
846 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(1,quadrant,kNslats4-1)); |
847 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(1,quadrant,kNslats4-1)); |
6296ba34 |
848 | |
e516b01d |
849 | GetEnvelopes(6)->AddEnvelopeConstituentParam("S07G",idSlatCh7, quadrant*100+imax+4*idiv+1, |
850 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength,0.),3,divpar); |
6296ba34 |
851 | |
e516b01d |
852 | GetEnvelopes(7)->AddEnvelopeConstituentParam("S08G", idSlatCh8, quadrant*100+imax+4*idiv+1, |
853 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength,0.),3,divpar); |
854 | } |
d12a7158 |
855 | } |
e516b01d |
856 | // cout << "Geometry for Station 4...... done" << endl; |
857 | |
858 | } |
d1cd2474 |
859 | |
e516b01d |
860 | if (fStations[4]) { |
6296ba34 |
861 | |
d1cd2474 |
862 | |
e516b01d |
863 | // //******************************************************************** |
864 | // // Station 5 ** |
865 | // //******************************************************************** |
866 | // // indices 1 and 2 for first and second chambers in the station |
867 | // // iChamber (first chamber) kept for other quanties than Z, |
868 | // // assumed to be the same in both chambers |
869 | // corrected geometry (JP. Cussonneau, Ch. Finck) |
870 | |
871 | iChamber = GetChamber(8); |
872 | iChamber1 = iChamber; |
873 | iChamber2 = GetChamber(9); |
d1cd2474 |
874 | |
e516b01d |
875 | const Int_t kNslats5 = 7; // number of slats per quadrant |
876 | const Int_t kNPCB5[kNslats5] = {5, 6, 6, 6, 5, 4, 3}; // n PCB per slat |
877 | const Float_t kXpos5[kNslats5] = {38.2, 0., 0., 0., 0., 0., 0.}; |
878 | const Float_t kYpos5[kNslats5] = {0., 38.2, 37.9, 37.6, 37.3, 37.05, 36.75}; |
879 | Float_t slatLength5[kNslats5]; |
880 | |
881 | // create and position the slat (mother) volumes |
882 | |
883 | char idSlatCh9[5]; |
884 | char idSlatCh10[5]; |
885 | Float_t xSlat5; |
886 | Float_t ySlat5 = 0; |
887 | angle = 0.; |
888 | |
889 | for (i = 0; i < kNslats5; i++){ |
890 | |
891 | slatLength5[i] = kPcbLength * kNPCB5[i] + 2.* kVframeLength; |
892 | xSlat5 = slatLength5[i]/2. + kDslatLength + kXpos5[i]; |
893 | ySlat5 += kYpos5[i]; |
894 | |
895 | spar[0] = slatLength5[i]/2.; |
896 | spar[1] = kSlatHeight/2.; |
897 | spar[2] = kSlatWidth/2.; |
898 | |
899 | Float_t dzCh5 = dzCh; |
900 | Float_t zSlat5 = (i%2 ==0)? -zSlat : zSlat; |
901 | |
902 | sprintf(idSlatCh9,"LE%d",kNslats5-1+i); |
903 | detElemId = 900 + i + kNslats5-1; |
904 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
905 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5), |
906 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
907 | |
908 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2+i); |
909 | detElemId = 950 + i + kNslats5-1; |
910 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
911 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5), |
912 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
d1cd2474 |
913 | |
e516b01d |
914 | if (i > 0) { |
915 | sprintf(idSlatCh9,"LE%d",kNslats5-1-i); |
916 | detElemId = 900 - i + kNslats5-1; |
917 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
918 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5), |
919 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
920 | |
921 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2-i); |
922 | detElemId = 950 - i + kNslats5-1; |
923 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
924 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5), |
925 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
926 | } |
927 | |
928 | sprintf(idSlatCh10,"LF%d",kNslats5-1+i); |
929 | detElemId = 1000 + i + kNslats5-1; |
930 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
931 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5), |
932 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
933 | |
934 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2+i); |
935 | detElemId = 1050 + i + kNslats5-1; |
936 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
937 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5), |
938 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
939 | |
940 | if (i > 0) { |
941 | sprintf(idSlatCh10,"LF%d",kNslats5-1-i); |
942 | detElemId = 1000 - i + kNslats5-1; |
943 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
944 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5), |
945 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
946 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2-i); |
947 | detElemId = 1050 - i + kNslats5-1; |
948 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
949 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5), |
950 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
951 | } |
952 | } |
953 | |
954 | // create the panel volume |
d12a7158 |
955 | |
e516b01d |
956 | gMC->Gsvolu("S09C","BOX",kCarbonMaterial,panelpar,3); |
957 | gMC->Gsvolu("S10C","BOX",kCarbonMaterial,panelpar,3); |
958 | |
959 | // create the nomex volume |
960 | |
961 | gMC->Gsvolu("S09N","BOX",kNomexMaterial,nomexpar,3); |
962 | gMC->Gsvolu("S10N","BOX",kNomexMaterial,nomexpar,3); |
d1cd2474 |
963 | |
d1cd2474 |
964 | |
e516b01d |
965 | // create the nomex volume (bulk) |
d1cd2474 |
966 | |
e516b01d |
967 | gMC->Gsvolu("S09X","BOX",kNomexBMaterial,nomexbpar,3); |
968 | gMC->Gsvolu("S10X","BOX",kNomexBMaterial,nomexbpar,3); |
d1cd2474 |
969 | |
e516b01d |
970 | // create the insulating material volume |
d1cd2474 |
971 | |
e516b01d |
972 | gMC->Gsvolu("S09I","BOX",kInsuMaterial,insupar,3); |
973 | gMC->Gsvolu("S10I","BOX",kInsuMaterial,insupar,3); |
c3b69531 |
974 | |
e516b01d |
975 | // create the PCB volume |
976 | |
977 | gMC->Gsvolu("S09P","BOX",kPcbMaterial,pcbpar,3); |
978 | gMC->Gsvolu("S10P","BOX",kPcbMaterial,pcbpar,3); |
d1cd2474 |
979 | |
e516b01d |
980 | // create the sensitive volumes, |
981 | |
982 | gMC->Gsvolu("S09G","BOX",kSensMaterial,dum,0); |
983 | gMC->Gsvolu("S10G","BOX",kSensMaterial,dum,0); |
984 | |
985 | // create the vertical frame volume |
986 | |
987 | gMC->Gsvolu("S09V","BOX",kVframeMaterial,vFramepar,3); |
988 | gMC->Gsvolu("S10V","BOX",kVframeMaterial,vFramepar,3); |
989 | |
990 | // create the horizontal frame volume |
991 | |
992 | gMC->Gsvolu("S09H","BOX",kHframeMaterial,hFramepar,3); |
993 | gMC->Gsvolu("S10H","BOX",kHframeMaterial,hFramepar,3); |
994 | |
995 | // create the horizontal border volume |
996 | |
997 | gMC->Gsvolu("S09B","BOX",kBframeMaterial,bFramepar,3); |
998 | gMC->Gsvolu("S10B","BOX",kBframeMaterial,bFramepar,3); |
999 | |
1000 | index = 0; |
1001 | for (i = 0; i < kNslats5; i++){ |
1002 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
1003 | |
1004 | if (i == 0 && quadrant == 2) continue; |
1005 | if (i == 0 && quadrant == 4) continue; |
1006 | |
1007 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(i,quadrant,kNslats5-1)); |
1008 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(i,quadrant,kNslats5-1)); |
1009 | Float_t xvFrame = (slatLength5[i] - kVframeLength)/2.; // ok |
1010 | |
1011 | // position the vertical frames (spacers) |
1012 | if (i != 1) { |
1013 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
1014 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
1015 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
1016 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
1017 | } else { // no rounded spacer yet |
1018 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
1019 | // GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
1020 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
1021 | // GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
1022 | } |
1023 | |
1024 | // position the panels and the insulating material |
1025 | for (j = 0; j < kNPCB5[i]; j++){ |
1026 | if (i == 1 && j == 0) continue; |
1027 | index++; |
1028 | Float_t xx = kSensLength * (-kNPCB5[i]/2.+j+.5); |
1029 | |
1030 | Float_t zPanel = spar[2] - nomexbpar[2]; |
1031 | GetEnvelopes(8)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
1032 | GetEnvelopes(8)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
1033 | GetEnvelopes(8)->AddEnvelopeConstituent("S09I", idSlatCh9, index,TGeoTranslation(xx,0.,0.)); |
1034 | |
1035 | GetEnvelopes(9)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
1036 | GetEnvelopes(9)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
1037 | GetEnvelopes(9)->AddEnvelopeConstituent("S10I", idSlatCh10, index,TGeoTranslation(xx,0.,0.)); |
1038 | } |
1039 | } |
1040 | } |
1041 | |
1042 | // position the nomex volume inside the panel volume |
1043 | gMC->Gspos("S09N",1,"S09C",0.,0.,0.,0,"ONLY"); |
1044 | gMC->Gspos("S10N",1,"S10C",0.,0.,0.,0,"ONLY"); |
1045 | |
1046 | // position panel volume inside the bulk nomex material volume |
1047 | gMC->Gspos("S09C",1,"S09X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
1048 | gMC->Gspos("S10C",1,"S10X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
1049 | |
1050 | // position the PCB volume inside the insulating material volume |
1051 | gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY"); |
1052 | gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY"); |
1053 | |
1054 | // position the horizontal frame volume inside the PCB volume |
1055 | gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY"); |
1056 | gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY"); |
1057 | |
1058 | // position the sensitive volume inside the horizontal frame volume |
1059 | gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3); |
1060 | gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3); |
1061 | |
1062 | // position the border volumes inside the PCB volume |
1063 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
1064 | gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY"); |
1065 | gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY"); |
1066 | gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY"); |
1067 | gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY"); |
1068 | |
1069 | // // create the NULOC volume and position it in the horizontal frame |
1070 | |
1071 | gMC->Gsvolu("S09E","BOX",kNulocMaterial,nulocpar,3); |
1072 | gMC->Gsvolu("S10E","BOX",kNulocMaterial,nulocpar,3); |
1073 | index = 0; |
1074 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
1075 | index++; |
1076 | gMC->Gspos("S09E",2*index-1,"S09B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
1077 | gMC->Gspos("S09E",2*index ,"S09B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
1078 | gMC->Gspos("S10E",2*index-1,"S10B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
1079 | gMC->Gspos("S10E",2*index ,"S10B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
1080 | } |
1081 | |
d1cd2474 |
1082 | |
e516b01d |
1083 | // position the volumes approximating the circular section of the pipe |
1084 | Float_t epsilon = 0.001; |
1085 | Int_t ndiv = 10; |
1086 | Int_t imax = 1; |
1087 | Double_t divpar[3]; |
1088 | Double_t dydiv = kSensHeight/ndiv; |
1089 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
1090 | Float_t rmin = 39.5; |
1091 | Float_t xdiv = 0.; |
1092 | Float_t xvol; |
1093 | Float_t yvol; |
1094 | |
1095 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
1096 | ydiv += dydiv; |
1097 | xdiv = 0.; |
1098 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
1099 | divpar[0] = (kPcbLength - xdiv)/2.; |
1100 | divpar[1] = dydiv/2. - epsilon; |
1101 | divpar[2] = kSensWidth/2.; |
1102 | xvol = (kPcbLength + xdiv)/2.; |
1103 | yvol = ydiv; |
1104 | |
1105 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
1106 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(1,quadrant,kNslats5-1)); |
1107 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(1,quadrant,kNslats5-1)); |
1108 | |
1109 | GetEnvelopes(8)->AddEnvelopeConstituentParam("S09G", idSlatCh9, quadrant*100+imax+4*idiv+1, |
1110 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength,0.),3,divpar); |
1111 | GetEnvelopes(9)->AddEnvelopeConstituentParam("S10G", idSlatCh10, quadrant*100+imax+4*idiv+1, |
1112 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength,0.),3,divpar); |
1113 | } |
d1cd2474 |
1114 | } |
e516b01d |
1115 | // cout << "Geometry for Station 5...... done" << endl; |
1116 | |
1117 | } |
d1cd2474 |
1118 | } |
1119 | |
1120 | |
1121 | //______________________________________________________________________________ |
1122 | void AliMUONSlatGeometryBuilder::SetTransformations() |
1123 | { |
1124 | // Defines the transformations for the station2 chambers. |
1125 | // --- |
1126 | |
1127 | AliMUONChamber* iChamber1 = GetChamber(4); |
1128 | Double_t zpos1 = - iChamber1->Z(); |
1129 | iChamber1->GetGeometry() |
1130 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
1131 | |
1132 | AliMUONChamber* iChamber2 = GetChamber(5); |
1133 | Double_t zpos2 = - iChamber2->Z(); |
1134 | iChamber2->GetGeometry() |
1135 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
1136 | |
1137 | iChamber1 = GetChamber(6); |
1138 | zpos1 = - iChamber1->Z(); |
1139 | iChamber1->GetGeometry() |
1140 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
1141 | |
1142 | iChamber2 = GetChamber(7); |
1143 | zpos2 = - iChamber2->Z(); |
1144 | iChamber2->GetGeometry() |
1145 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
1146 | |
1147 | iChamber1 = GetChamber(8); |
1148 | zpos1 = - iChamber1->Z(); |
1149 | iChamber1->GetGeometry() |
1150 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
1151 | |
1152 | iChamber2 = GetChamber(9); |
1153 | zpos2 = - iChamber2->Z(); |
1154 | iChamber2->GetGeometry() |
1155 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
1156 | |
1157 | } |
1158 | |
1159 | //______________________________________________________________________________ |
1160 | void AliMUONSlatGeometryBuilder::SetSensitiveVolumes() |
1161 | { |
1162 | // Defines the sensitive volumes for slat stations chambers. |
1163 | // --- |
1164 | |
1165 | GetChamber(4)->GetGeometry()->SetSensitiveVolume("S05G"); |
1166 | GetChamber(5)->GetGeometry()->SetSensitiveVolume("S06G"); |
1167 | GetChamber(6)->GetGeometry()->SetSensitiveVolume("S07G"); |
1168 | GetChamber(7)->GetGeometry()->SetSensitiveVolume("S08G"); |
1169 | GetChamber(8)->GetGeometry()->SetSensitiveVolume("S09G"); |
1170 | GetChamber(9)->GetGeometry()->SetSensitiveVolume("S10G"); |
1171 | } |
1172 | |
1173 | //______________________________________________________________________________ |
1174 | Int_t AliMUONSlatGeometryBuilder::ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq) const |
1175 | { |
2057e0cc |
1176 | // On-line function establishing the correspondance between numslat (the slat number on a particular quadrant (numslat->0....4 for St3)) |
1177 | // and slatnum (the slat number on the whole panel (slatnum->1...18 for St3) |
c10e6eaf |
1178 | numslat += 1; |
1179 | if (quadnum==2 || quadnum==3) |
1180 | numslat += fspq; |
1181 | else |
1182 | numslat = fspq + 2-numslat; |
1183 | numslat -= 1; |
d1cd2474 |
1184 | |
c10e6eaf |
1185 | if (quadnum==3 || quadnum==4) numslat += 2*fspq+1; |
1186 | |
1187 | return numslat; |
d1cd2474 |
1188 | } |