Avoid ambiguities in function overloading for new Virtual MC
[u/mrichter/AliRoot.git] / MUON / AliMUONv1.cxx
CommitLineData
a9e2aefa 1/**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3 * *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
6 * *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
2c799aa2 12 * about the suitability of this software for any purpeateose. It is *
a9e2aefa 13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
15
16/*
17$Log$
3f08857e 18Revision 1.33 2002/07/23 10:02:46 morsch
19All volume names start with "S".
20
b74f1c6a 21Revision 1.32 2002/05/02 12:51:10 morsch
22For G4: gMC->VolId(...) replaced by gAlice->GetModule(...).
23
fe713e43 24Revision 1.31 2002/03/13 07:55:04 jchudoba
25Correction of the errourness last commit.
26
4b1670dc 27Revision 1.29 2001/06/21 14:54:37 morsch
28Put volumes of station 3 into DIPO if present. (A. de Falco)
29
2724ae40 30Revision 1.28 2001/05/16 14:57:17 alibrary
31New files for folders and Stack
32
9e1a0ddb 33Revision 1.27 2001/04/06 11:24:43 morsch
34Dependency on implementations of AliSegmentation and AliMUONResponse moved to AliMUONFactory class.
35Static method Build() builds the MUON system out of chambers, segmentation and response.
36
be3bb6c1 37Revision 1.26 2001/03/17 10:07:20 morsch
38Correct inconsistent variable name / method name / comments.
39
2eb55fab 40Revision 1.25 2001/03/16 15:32:06 morsch
41Corrections of overlap with beam shield and dipole (A. de Falco)
42
21a18f36 43Revision 1.24 2001/03/14 17:22:15 pcrochet
44Geometry of the trigger chambers : a vertical gap of has been introduced around x=0 according fig.3.27 of the TDR (P.Dupieux)
45
236fe2c5 46Revision 1.23 2001/01/18 15:23:49 egangler
47Bug correction in StepManager :
48Now the systematic offset with angle is cured
49
e0f71fb7 50Revision 1.22 2001/01/17 21:01:21 hristov
51Unused variable removed
52
a7e8b51a 53Revision 1.21 2000/12/20 13:00:22 egangler
54
55Added charge correlation between cathods.
56In Config_slat.C, use
57 MUON->Chamber(chamber-1).SetChargeCorrel(0.11); to set the RMS of
58 q1/q2 to 11 % (number from Alberto)
59 This is stored in AliMUONChamber fChargeCorrel member.
60 At generation time, when a tracks enters the volume,
61 AliMUONv1::StepManager calls
62 AliMUONChamber::ChargeCorrelationInit() to set the current value of
63 fCurrentCorrel which is then used at Disintegration level to scale
64 appropriately the PadHit charges.
65
681d067b 66Revision 1.20 2000/12/04 17:48:23 gosset
67Modifications for stations 1 et 2 mainly:
68* station 1 with 4 mm gas gap and smaller cathode segmentation...
69* stations 1 and 2 with "grey" frame crosses
70* mean noise at 1.5 ADC channel
71* Ar-CO2 gas (80%+20%)
72
b64652f5 73Revision 1.19 2000/12/02 17:15:46 morsch
74Correction of dead zones in inner regions of stations 3-5
75Correction of length of slats 3 and 9 of station 4.
76
a083207d 77Revision 1.17 2000/11/24 12:57:10 morsch
78New version of geometry for stations 3-5 "Slats" (A. de Falco)
79 - sensitive region at station 3 inner radius
80 - improved volume tree structure
81
3c084d9f 82Revision 1.16 2000/11/08 13:01:40 morsch
83Chamber half-planes of stations 3-5 at different z-positions.
84
e1ad7d45 85Revision 1.15 2000/11/06 11:39:02 morsch
86Bug in StepManager() corrected.
87
e3cf5faa 88Revision 1.14 2000/11/06 09:16:50 morsch
89Avoid overlap of slat volumes.
90
2c799aa2 91Revision 1.13 2000/10/26 07:33:44 morsch
92Correct x-position of slats in station 5.
93
8013c580 94Revision 1.12 2000/10/25 19:55:35 morsch
95Switches for each station individually for debug and lego.
96
b17c0c87 97Revision 1.11 2000/10/22 16:44:01 morsch
98Update of slat geometry for stations 3,4,5 (A. deFalco)
99
f9f7c205 100Revision 1.10 2000/10/12 16:07:04 gosset
101StepManager:
102* SigGenCond only called for tracking chambers,
103 hence no more division by 0,
104 and may use last ALIROOT/dummies.C with exception handling;
105* "10" replaced by "AliMUONConstants::NTrackingCh()".
106
a75f073c 107Revision 1.9 2000/10/06 15:37:22 morsch
108Problems with variable redefinition in for-loop solved.
109Variable names starting with u-case letters changed to l-case.
110
6c5ddcfa 111Revision 1.8 2000/10/06 09:06:31 morsch
112Include Slat chambers (stations 3-5) into geometry (A. de Falco)
113
1e8fff9c 114Revision 1.7 2000/10/02 21:28:09 fca
115Removal of useless dependecies via forward declarations
116
94de3818 117Revision 1.6 2000/10/02 17:20:45 egangler
118Cleaning of the code (continued ) :
119-> coding conventions
120-> void Streamers
121-> some useless includes removed or replaced by "class" statement
122
8c449e83 123Revision 1.5 2000/06/28 15:16:35 morsch
124(1) Client code adapted to new method signatures in AliMUONSegmentation (see comments there)
125to allow development of slat-muon chamber simulation and reconstruction code in the MUON
126framework. The changes should have no side effects (mostly dummy arguments).
127(2) Hit disintegration uses 3-dim hit coordinates to allow simulation
128of chambers with overlapping modules (MakePadHits, Disintegration).
129
802a864d 130Revision 1.4 2000/06/26 14:02:38 morsch
131Add class AliMUONConstants with MUON specific constants using static memeber data and access methods.
132
f665c1ea 133Revision 1.3 2000/06/22 14:10:05 morsch
134HP scope problems corrected (PH)
135
e17592e9 136Revision 1.2 2000/06/15 07:58:49 morsch
137Code from MUON-dev joined
138
a9e2aefa 139Revision 1.1.2.14 2000/06/14 14:37:25 morsch
140Initialization of TriggerCircuit added (PC)
141
142Revision 1.1.2.13 2000/06/09 21:55:47 morsch
143Most coding rule violations corrected.
144
145Revision 1.1.2.12 2000/05/05 11:34:29 morsch
146Log inside comments.
147
148Revision 1.1.2.11 2000/05/05 10:06:48 morsch
149Coding Rule violations regarding trigger section corrected (CP)
150Log messages included.
151*/
152
153/////////////////////////////////////////////////////////
154// Manager and hits classes for set:MUON version 0 //
155/////////////////////////////////////////////////////////
156
157#include <TTUBE.h>
158#include <TNode.h>
159#include <TRandom.h>
160#include <TLorentzVector.h>
161#include <iostream.h>
162
163#include "AliMUONv1.h"
164#include "AliRun.h"
165#include "AliMC.h"
94de3818 166#include "AliMagF.h"
a9e2aefa 167#include "AliCallf77.h"
168#include "AliConst.h"
169#include "AliMUONChamber.h"
170#include "AliMUONHit.h"
171#include "AliMUONPadHit.h"
f665c1ea 172#include "AliMUONConstants.h"
8c449e83 173#include "AliMUONTriggerCircuit.h"
be3bb6c1 174#include "AliMUONFactory.h"
a9e2aefa 175
176ClassImp(AliMUONv1)
177
178//___________________________________________
37c0cd40 179AliMUONv1::AliMUONv1() : AliMUON()
a9e2aefa 180{
181// Constructor
37c0cd40 182 fChambers = 0;
a9e2aefa 183}
184
185//___________________________________________
186AliMUONv1::AliMUONv1(const char *name, const char *title)
187 : AliMUON(name,title)
188{
189// Constructor
be3bb6c1 190 AliMUONFactory::Build(this, title);
a9e2aefa 191}
192
193//___________________________________________
194void AliMUONv1::CreateGeometry()
195{
196//
197// Note: all chambers have the same structure, which could be
198// easily parameterised. This was intentionally not done in order
199// to give a starting point for the implementation of the actual
200// design of each station.
201 Int_t *idtmed = fIdtmed->GetArray()-1099;
202
203// Distance between Stations
204//
205 Float_t bpar[3];
206 Float_t tpar[3];
b64652f5 207// Float_t pgpar[10];
a9e2aefa 208 Float_t zpos1, zpos2, zfpos;
b64652f5 209 // Outer excess and inner recess for mother volume radius
210 // with respect to ROuter and RInner
a9e2aefa 211 Float_t dframep=.001; // Value for station 3 should be 6 ...
b64652f5 212 // Width (RdPhi) of the frame crosses for stations 1 and 2 (cm)
213// Float_t dframep1=.001;
214 Float_t dframep1 = 11.0;
215// Bool_t frameCrosses=kFALSE;
216 Bool_t frameCrosses=kTRUE;
3f08857e 217 Float_t *dum=0;
a9e2aefa 218
b64652f5 219// Float_t dframez=0.9;
220 // Half of the total thickness of frame crosses (including DAlu)
221 // for each chamber in stations 1 and 2:
222 // 3% of X0 of composite material,
223 // but taken as Aluminium here, with same thickness in number of X0
224 Float_t dframez = 3. * 8.9 / 100;
225// Float_t dr;
a9e2aefa 226 Float_t dstation;
227
228//
229// Rotation matrices in the x-y plane
230 Int_t idrotm[1199];
231// phi= 0 deg
232 AliMatrix(idrotm[1100], 90., 0., 90., 90., 0., 0.);
233// phi= 90 deg
234 AliMatrix(idrotm[1101], 90., 90., 90., 180., 0., 0.);
235// phi= 180 deg
236 AliMatrix(idrotm[1102], 90., 180., 90., 270., 0., 0.);
237// phi= 270 deg
238 AliMatrix(idrotm[1103], 90., 270., 90., 0., 0., 0.);
239//
240 Float_t phi=2*TMath::Pi()/12/2;
241
242//
243// pointer to the current chamber
244// pointer to the current chamber
b64652f5 245 Int_t idAlu1=idtmed[1103]; // medium 4
246 Int_t idAlu2=idtmed[1104]; // medium 5
a9e2aefa 247// Int_t idAlu1=idtmed[1100];
248// Int_t idAlu2=idtmed[1100];
b64652f5 249 Int_t idAir=idtmed[1100]; // medium 1
250// Int_t idGas=idtmed[1105]; // medium 6 = Ar-isoC4H10 gas
251 Int_t idGas=idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%)
a9e2aefa 252
253
254 AliMUONChamber *iChamber, *iChamber1, *iChamber2;
b17c0c87 255 Int_t stations[5] = {1, 1, 1, 1, 1};
256
257 if (stations[0]) {
258
a9e2aefa 259//********************************************************************
260// Station 1 **
261//********************************************************************
262// CONCENTRIC
263 // indices 1 and 2 for first and second chambers in the station
264 // iChamber (first chamber) kept for other quanties than Z,
265 // assumed to be the same in both chambers
266 iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[0];
267 iChamber2 =(AliMUONChamber*) (*fChambers)[1];
268 zpos1=iChamber1->Z();
269 zpos2=iChamber2->Z();
270 dstation = zpos2 - zpos1;
b64652f5 271 // DGas decreased from standard one (0.5)
272 iChamber->SetDGas(0.4); iChamber2->SetDGas(0.4);
273 // DAlu increased from standard one (3% of X0),
274 // because more electronics with smaller pads
275 iChamber->SetDAlu(3.5 * 8.9 / 100.); iChamber2->SetDAlu(3.5 * 8.9 / 100.);
a9e2aefa 276 zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2;
277
278//
279// Mother volume
b64652f5 280 tpar[0] = iChamber->RInner()-dframep;
281 tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi);
2c799aa2 282 tpar[2] = dstation/5;
a9e2aefa 283
b74f1c6a 284 gMC->Gsvolu("S01M", "TUBE", idAir, tpar, 3);
285 gMC->Gsvolu("S02M", "TUBE", idAir, tpar, 3);
286 gMC->Gspos("S01M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY");
287 gMC->Gspos("S02M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY");
b64652f5 288// // Aluminium frames
289// // Outer frames
290// pgpar[0] = 360/12/2;
291// pgpar[1] = 360.;
292// pgpar[2] = 12.;
293// pgpar[3] = 2;
294// pgpar[4] = -dframez/2;
295// pgpar[5] = iChamber->ROuter();
296// pgpar[6] = pgpar[5]+dframep1;
297// pgpar[7] = +dframez/2;
298// pgpar[8] = pgpar[5];
299// pgpar[9] = pgpar[6];
b74f1c6a 300// gMC->Gsvolu("S01O", "PGON", idAlu1, pgpar, 10);
301// gMC->Gsvolu("S02O", "PGON", idAlu1, pgpar, 10);
302// gMC->Gspos("S01O",1,"S01M", 0.,0.,-zfpos, 0,"ONLY");
303// gMC->Gspos("S01O",2,"S01M", 0.,0.,+zfpos, 0,"ONLY");
304// gMC->Gspos("S02O",1,"S02M", 0.,0.,-zfpos, 0,"ONLY");
305// gMC->Gspos("S02O",2,"S02M", 0.,0.,+zfpos, 0,"ONLY");
b64652f5 306// //
307// // Inner frame
308// tpar[0]= iChamber->RInner()-dframep1;
309// tpar[1]= iChamber->RInner();
310// tpar[2]= dframez/2;
b74f1c6a 311// gMC->Gsvolu("S01I", "TUBE", idAlu1, tpar, 3);
312// gMC->Gsvolu("S02I", "TUBE", idAlu1, tpar, 3);
b64652f5 313
b74f1c6a 314// gMC->Gspos("S01I",1,"S01M", 0.,0.,-zfpos, 0,"ONLY");
315// gMC->Gspos("S01I",2,"S01M", 0.,0.,+zfpos, 0,"ONLY");
316// gMC->Gspos("S02I",1,"S02M", 0.,0.,-zfpos, 0,"ONLY");
317// gMC->Gspos("S02I",2,"S02M", 0.,0.,+zfpos, 0,"ONLY");
a9e2aefa 318//
319// Frame Crosses
b64652f5 320 if (frameCrosses) {
321 // outside gas
322 // security for inside mother volume
323 bpar[0] = (iChamber->ROuter() - iChamber->RInner())
324 * TMath::Cos(TMath::ASin(dframep1 /
325 (iChamber->ROuter() - iChamber->RInner())))
326 / 2.0;
a9e2aefa 327 bpar[1] = dframep1/2;
b64652f5 328 // total thickness will be (4 * bpar[2]) for each chamber,
329 // which has to be equal to (2 * dframez) - DAlu
330 bpar[2] = (2.0 * dframez - iChamber->DAlu()) / 4.0;
b74f1c6a 331 gMC->Gsvolu("S01B", "BOX", idAlu1, bpar, 3);
332 gMC->Gsvolu("S02B", "BOX", idAlu1, bpar, 3);
a9e2aefa 333
b74f1c6a 334 gMC->Gspos("S01B",1,"S01M", +iChamber->RInner()+bpar[0] , 0,-zfpos,
a9e2aefa 335 idrotm[1100],"ONLY");
b74f1c6a 336 gMC->Gspos("S01B",2,"S01M", -iChamber->RInner()-bpar[0] , 0,-zfpos,
a9e2aefa 337 idrotm[1100],"ONLY");
b74f1c6a 338 gMC->Gspos("S01B",3,"S01M", 0, +iChamber->RInner()+bpar[0] ,-zfpos,
a9e2aefa 339 idrotm[1101],"ONLY");
b74f1c6a 340 gMC->Gspos("S01B",4,"S01M", 0, -iChamber->RInner()-bpar[0] ,-zfpos,
a9e2aefa 341 idrotm[1101],"ONLY");
b74f1c6a 342 gMC->Gspos("S01B",5,"S01M", +iChamber->RInner()+bpar[0] , 0,+zfpos,
a9e2aefa 343 idrotm[1100],"ONLY");
b74f1c6a 344 gMC->Gspos("S01B",6,"S01M", -iChamber->RInner()-bpar[0] , 0,+zfpos,
a9e2aefa 345 idrotm[1100],"ONLY");
b74f1c6a 346 gMC->Gspos("S01B",7,"S01M", 0, +iChamber->RInner()+bpar[0] ,+zfpos,
a9e2aefa 347 idrotm[1101],"ONLY");
b74f1c6a 348 gMC->Gspos("S01B",8,"S01M", 0, -iChamber->RInner()-bpar[0] ,+zfpos,
a9e2aefa 349 idrotm[1101],"ONLY");
350
b74f1c6a 351 gMC->Gspos("S02B",1,"S02M", +iChamber->RInner()+bpar[0] , 0,-zfpos,
a9e2aefa 352 idrotm[1100],"ONLY");
b74f1c6a 353 gMC->Gspos("S02B",2,"S02M", -iChamber->RInner()-bpar[0] , 0,-zfpos,
a9e2aefa 354 idrotm[1100],"ONLY");
b74f1c6a 355 gMC->Gspos("S02B",3,"S02M", 0, +iChamber->RInner()+bpar[0] ,-zfpos,
a9e2aefa 356 idrotm[1101],"ONLY");
b74f1c6a 357 gMC->Gspos("S02B",4,"S02M", 0, -iChamber->RInner()-bpar[0] ,-zfpos,
a9e2aefa 358 idrotm[1101],"ONLY");
b74f1c6a 359 gMC->Gspos("S02B",5,"S02M", +iChamber->RInner()+bpar[0] , 0,+zfpos,
a9e2aefa 360 idrotm[1100],"ONLY");
b74f1c6a 361 gMC->Gspos("S02B",6,"S02M", -iChamber->RInner()-bpar[0] , 0,+zfpos,
a9e2aefa 362 idrotm[1100],"ONLY");
b74f1c6a 363 gMC->Gspos("S02B",7,"S02M", 0, +iChamber->RInner()+bpar[0] ,+zfpos,
a9e2aefa 364 idrotm[1101],"ONLY");
b74f1c6a 365 gMC->Gspos("S02B",8,"S02M", 0, -iChamber->RInner()-bpar[0] ,+zfpos,
a9e2aefa 366 idrotm[1101],"ONLY");
367 }
368//
369// Chamber Material represented by Alu sheet
370 tpar[0]= iChamber->RInner();
371 tpar[1]= iChamber->ROuter();
372 tpar[2] = (iChamber->DGas()+iChamber->DAlu())/2;
b74f1c6a 373 gMC->Gsvolu("S01A", "TUBE", idAlu2, tpar, 3);
374 gMC->Gsvolu("S02A", "TUBE",idAlu2, tpar, 3);
375 gMC->Gspos("S01A", 1, "S01M", 0., 0., 0., 0, "ONLY");
376 gMC->Gspos("S02A", 1, "S02M", 0., 0., 0., 0, "ONLY");
a9e2aefa 377//
378// Sensitive volumes
379 // tpar[2] = iChamber->DGas();
380 tpar[2] = iChamber->DGas()/2;
b74f1c6a 381 gMC->Gsvolu("S01G", "TUBE", idGas, tpar, 3);
382 gMC->Gsvolu("S02G", "TUBE", idGas, tpar, 3);
383 gMC->Gspos("S01G", 1, "S01A", 0., 0., 0., 0, "ONLY");
384 gMC->Gspos("S02G", 1, "S02A", 0., 0., 0., 0, "ONLY");
a9e2aefa 385//
b64652f5 386// Frame Crosses to be placed inside gas
387 // NONE: chambers are sensitive everywhere
388// if (frameCrosses) {
389
390// dr = (iChamber->ROuter() - iChamber->RInner());
391// bpar[0] = TMath::Sqrt(dr*dr-dframep1*dframep1/4)/2;
392// bpar[1] = dframep1/2;
393// bpar[2] = iChamber->DGas()/2;
b74f1c6a 394// gMC->Gsvolu("S01F", "BOX", idAlu1, bpar, 3);
395// gMC->Gsvolu("S02F", "BOX", idAlu1, bpar, 3);
a9e2aefa 396
b74f1c6a 397// gMC->Gspos("S01F",1,"S01G", +iChamber->RInner()+bpar[0] , 0, 0,
b64652f5 398// idrotm[1100],"ONLY");
b74f1c6a 399// gMC->Gspos("S01F",2,"S01G", -iChamber->RInner()-bpar[0] , 0, 0,
b64652f5 400// idrotm[1100],"ONLY");
b74f1c6a 401// gMC->Gspos("S01F",3,"S01G", 0, +iChamber->RInner()+bpar[0] , 0,
b64652f5 402// idrotm[1101],"ONLY");
b74f1c6a 403// gMC->Gspos("S01F",4,"S01G", 0, -iChamber->RInner()-bpar[0] , 0,
b64652f5 404// idrotm[1101],"ONLY");
a9e2aefa 405
b74f1c6a 406// gMC->Gspos("S02F",1,"S02G", +iChamber->RInner()+bpar[0] , 0, 0,
b64652f5 407// idrotm[1100],"ONLY");
b74f1c6a 408// gMC->Gspos("S02F",2,"S02G", -iChamber->RInner()-bpar[0] , 0, 0,
b64652f5 409// idrotm[1100],"ONLY");
b74f1c6a 410// gMC->Gspos("S02F",3,"S02G", 0, +iChamber->RInner()+bpar[0] , 0,
b64652f5 411// idrotm[1101],"ONLY");
b74f1c6a 412// gMC->Gspos("S02F",4,"S02G", 0, -iChamber->RInner()-bpar[0] , 0,
b64652f5 413// idrotm[1101],"ONLY");
414// }
b17c0c87 415 }
416 if (stations[1]) {
417
a9e2aefa 418//********************************************************************
419// Station 2 **
420//********************************************************************
421 // indices 1 and 2 for first and second chambers in the station
422 // iChamber (first chamber) kept for other quanties than Z,
423 // assumed to be the same in both chambers
424 iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[2];
425 iChamber2 =(AliMUONChamber*) (*fChambers)[3];
426 zpos1=iChamber1->Z();
427 zpos2=iChamber2->Z();
428 dstation = zpos2 - zpos1;
b64652f5 429 // DGas and DAlu not changed from standard values
a9e2aefa 430 zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2;
431
432//
433// Mother volume
434 tpar[0] = iChamber->RInner()-dframep;
435 tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi);
2c799aa2 436 tpar[2] = dstation/5;
a9e2aefa 437
b74f1c6a 438 gMC->Gsvolu("S03M", "TUBE", idAir, tpar, 3);
439 gMC->Gsvolu("S04M", "TUBE", idAir, tpar, 3);
440 gMC->Gspos("S03M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY");
441 gMC->Gspos("S04M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY");
1e8fff9c 442
b64652f5 443// // Aluminium frames
444// // Outer frames
445// pgpar[0] = 360/12/2;
446// pgpar[1] = 360.;
447// pgpar[2] = 12.;
448// pgpar[3] = 2;
449// pgpar[4] = -dframez/2;
450// pgpar[5] = iChamber->ROuter();
451// pgpar[6] = pgpar[5]+dframep;
452// pgpar[7] = +dframez/2;
453// pgpar[8] = pgpar[5];
454// pgpar[9] = pgpar[6];
b74f1c6a 455// gMC->Gsvolu("S03O", "PGON", idAlu1, pgpar, 10);
456// gMC->Gsvolu("S04O", "PGON", idAlu1, pgpar, 10);
457// gMC->Gspos("S03O",1,"S03M", 0.,0.,-zfpos, 0,"ONLY");
458// gMC->Gspos("S03O",2,"S03M", 0.,0.,+zfpos, 0,"ONLY");
459// gMC->Gspos("S04O",1,"S04M", 0.,0.,-zfpos, 0,"ONLY");
460// gMC->Gspos("S04O",2,"S04M", 0.,0.,+zfpos, 0,"ONLY");
b64652f5 461// //
462// // Inner frame
463// tpar[0]= iChamber->RInner()-dframep;
464// tpar[1]= iChamber->RInner();
465// tpar[2]= dframez/2;
b74f1c6a 466// gMC->Gsvolu("S03I", "TUBE", idAlu1, tpar, 3);
467// gMC->Gsvolu("S04I", "TUBE", idAlu1, tpar, 3);
b64652f5 468
b74f1c6a 469// gMC->Gspos("S03I",1,"S03M", 0.,0.,-zfpos, 0,"ONLY");
470// gMC->Gspos("S03I",2,"S03M", 0.,0.,+zfpos, 0,"ONLY");
471// gMC->Gspos("S04I",1,"S04M", 0.,0.,-zfpos, 0,"ONLY");
472// gMC->Gspos("S04I",2,"S04M", 0.,0.,+zfpos, 0,"ONLY");
a9e2aefa 473//
474// Frame Crosses
b64652f5 475 if (frameCrosses) {
476 // outside gas
477 // security for inside mother volume
478 bpar[0] = (iChamber->ROuter() - iChamber->RInner())
479 * TMath::Cos(TMath::ASin(dframep1 /
480 (iChamber->ROuter() - iChamber->RInner())))
481 / 2.0;
482 bpar[1] = dframep1/2;
483 // total thickness will be (4 * bpar[2]) for each chamber,
484 // which has to be equal to (2 * dframez) - DAlu
485 bpar[2] = (2.0 * dframez - iChamber->DAlu()) / 4.0;
b74f1c6a 486 gMC->Gsvolu("S03B", "BOX", idAlu1, bpar, 3);
487 gMC->Gsvolu("S04B", "BOX", idAlu1, bpar, 3);
a9e2aefa 488
b74f1c6a 489 gMC->Gspos("S03B",1,"S03M", +iChamber->RInner()+bpar[0] , 0,-zfpos,
a9e2aefa 490 idrotm[1100],"ONLY");
b74f1c6a 491 gMC->Gspos("S03B",2,"S03M", -iChamber->RInner()-bpar[0] , 0,-zfpos,
a9e2aefa 492 idrotm[1100],"ONLY");
b74f1c6a 493 gMC->Gspos("S03B",3,"S03M", 0, +iChamber->RInner()+bpar[0] ,-zfpos,
a9e2aefa 494 idrotm[1101],"ONLY");
b74f1c6a 495 gMC->Gspos("S03B",4,"S03M", 0, -iChamber->RInner()-bpar[0] ,-zfpos,
a9e2aefa 496 idrotm[1101],"ONLY");
b74f1c6a 497 gMC->Gspos("S03B",5,"S03M", +iChamber->RInner()+bpar[0] , 0,+zfpos,
a9e2aefa 498 idrotm[1100],"ONLY");
b74f1c6a 499 gMC->Gspos("S03B",6,"S03M", -iChamber->RInner()-bpar[0] , 0,+zfpos,
a9e2aefa 500 idrotm[1100],"ONLY");
b74f1c6a 501 gMC->Gspos("S03B",7,"S03M", 0, +iChamber->RInner()+bpar[0] ,+zfpos,
a9e2aefa 502 idrotm[1101],"ONLY");
b74f1c6a 503 gMC->Gspos("S03B",8,"S03M", 0, -iChamber->RInner()-bpar[0] ,+zfpos,
a9e2aefa 504 idrotm[1101],"ONLY");
505
b74f1c6a 506 gMC->Gspos("S04B",1,"S04M", +iChamber->RInner()+bpar[0] , 0,-zfpos,
a9e2aefa 507 idrotm[1100],"ONLY");
b74f1c6a 508 gMC->Gspos("S04B",2,"S04M", -iChamber->RInner()-bpar[0] , 0,-zfpos,
a9e2aefa 509 idrotm[1100],"ONLY");
b74f1c6a 510 gMC->Gspos("S04B",3,"S04M", 0, +iChamber->RInner()+bpar[0] ,-zfpos,
a9e2aefa 511 idrotm[1101],"ONLY");
b74f1c6a 512 gMC->Gspos("S04B",4,"S04M", 0, -iChamber->RInner()-bpar[0] ,-zfpos,
a9e2aefa 513 idrotm[1101],"ONLY");
b74f1c6a 514 gMC->Gspos("S04B",5,"S04M", +iChamber->RInner()+bpar[0] , 0,+zfpos,
a9e2aefa 515 idrotm[1100],"ONLY");
b74f1c6a 516 gMC->Gspos("S04B",6,"S04M", -iChamber->RInner()-bpar[0] , 0,+zfpos,
a9e2aefa 517 idrotm[1100],"ONLY");
b74f1c6a 518 gMC->Gspos("S04B",7,"S04M", 0, +iChamber->RInner()+bpar[0] ,+zfpos,
a9e2aefa 519 idrotm[1101],"ONLY");
b74f1c6a 520 gMC->Gspos("S04B",8,"S04M", 0, -iChamber->RInner()-bpar[0] ,+zfpos,
a9e2aefa 521 idrotm[1101],"ONLY");
522 }
523//
524// Chamber Material represented by Alu sheet
525 tpar[0]= iChamber->RInner();
526 tpar[1]= iChamber->ROuter();
527 tpar[2] = (iChamber->DGas()+iChamber->DAlu())/2;
b74f1c6a 528 gMC->Gsvolu("S03A", "TUBE", idAlu2, tpar, 3);
529 gMC->Gsvolu("S04A", "TUBE", idAlu2, tpar, 3);
530 gMC->Gspos("S03A", 1, "S03M", 0., 0., 0., 0, "ONLY");
531 gMC->Gspos("S04A", 1, "S04M", 0., 0., 0., 0, "ONLY");
a9e2aefa 532//
533// Sensitive volumes
534 // tpar[2] = iChamber->DGas();
535 tpar[2] = iChamber->DGas()/2;
b74f1c6a 536 gMC->Gsvolu("S03G", "TUBE", idGas, tpar, 3);
537 gMC->Gsvolu("S04G", "TUBE", idGas, tpar, 3);
538 gMC->Gspos("S03G", 1, "S03A", 0., 0., 0., 0, "ONLY");
539 gMC->Gspos("S04G", 1, "S04A", 0., 0., 0., 0, "ONLY");
a9e2aefa 540//
541// Frame Crosses to be placed inside gas
b64652f5 542 // NONE: chambers are sensitive everywhere
543// if (frameCrosses) {
544
545// dr = (iChamber->ROuter() - iChamber->RInner());
546// bpar[0] = TMath::Sqrt(dr*dr-dframep1*dframep1/4)/2;
547// bpar[1] = dframep1/2;
548// bpar[2] = iChamber->DGas()/2;
b74f1c6a 549// gMC->Gsvolu("S03F", "BOX", idAlu1, bpar, 3);
550// gMC->Gsvolu("S04F", "BOX", idAlu1, bpar, 3);
a9e2aefa 551
b74f1c6a 552// gMC->Gspos("S03F",1,"S03G", +iChamber->RInner()+bpar[0] , 0, 0,
b64652f5 553// idrotm[1100],"ONLY");
b74f1c6a 554// gMC->Gspos("S03F",2,"S03G", -iChamber->RInner()-bpar[0] , 0, 0,
b64652f5 555// idrotm[1100],"ONLY");
b74f1c6a 556// gMC->Gspos("S03F",3,"S03G", 0, +iChamber->RInner()+bpar[0] , 0,
b64652f5 557// idrotm[1101],"ONLY");
b74f1c6a 558// gMC->Gspos("S03F",4,"S03G", 0, -iChamber->RInner()-bpar[0] , 0,
b64652f5 559// idrotm[1101],"ONLY");
a9e2aefa 560
b74f1c6a 561// gMC->Gspos("S04F",1,"S04G", +iChamber->RInner()+bpar[0] , 0, 0,
b64652f5 562// idrotm[1100],"ONLY");
b74f1c6a 563// gMC->Gspos("S04F",2,"S04G", -iChamber->RInner()-bpar[0] , 0, 0,
b64652f5 564// idrotm[1100],"ONLY");
b74f1c6a 565// gMC->Gspos("S04F",3,"S04G", 0, +iChamber->RInner()+bpar[0] , 0,
b64652f5 566// idrotm[1101],"ONLY");
b74f1c6a 567// gMC->Gspos("S04F",4,"S04G", 0, -iChamber->RInner()-bpar[0] , 0,
b64652f5 568// idrotm[1101],"ONLY");
569// }
b17c0c87 570 }
1e8fff9c 571 // define the id of tracking media:
572 Int_t idCopper = idtmed[1110];
573 Int_t idGlass = idtmed[1111];
574 Int_t idCarbon = idtmed[1112];
575 Int_t idRoha = idtmed[1113];
576
1e8fff9c 577 // sensitive area: 40*40 cm**2
6c5ddcfa 578 const Float_t sensLength = 40.;
579 const Float_t sensHeight = 40.;
580 const Float_t sensWidth = 0.5; // according to TDR fig 2.120
581 const Int_t sensMaterial = idGas;
1e8fff9c 582 const Float_t yOverlap = 1.5;
583
584 // PCB dimensions in cm; width: 30 mum copper
6c5ddcfa 585 const Float_t pcbLength = sensLength;
586 const Float_t pcbHeight = 60.;
587 const Float_t pcbWidth = 0.003;
588 const Int_t pcbMaterial = idCopper;
1e8fff9c 589
590 // Insulating material: 200 mum glass fiber glued to pcb
6c5ddcfa 591 const Float_t insuLength = pcbLength;
592 const Float_t insuHeight = pcbHeight;
593 const Float_t insuWidth = 0.020;
594 const Int_t insuMaterial = idGlass;
1e8fff9c 595
596 // Carbon fiber panels: 200mum carbon/epoxy skin
6c5ddcfa 597 const Float_t panelLength = sensLength;
598 const Float_t panelHeight = sensHeight;
599 const Float_t panelWidth = 0.020;
600 const Int_t panelMaterial = idCarbon;
1e8fff9c 601
602 // rohacell between the two carbon panels
6c5ddcfa 603 const Float_t rohaLength = sensLength;
604 const Float_t rohaHeight = sensHeight;
605 const Float_t rohaWidth = 0.5;
606 const Int_t rohaMaterial = idRoha;
1e8fff9c 607
608 // Frame around the slat: 2 sticks along length,2 along height
609 // H: the horizontal ones
6c5ddcfa 610 const Float_t hFrameLength = pcbLength;
611 const Float_t hFrameHeight = 1.5;
612 const Float_t hFrameWidth = sensWidth;
613 const Int_t hFrameMaterial = idGlass;
1e8fff9c 614
615 // V: the vertical ones
6c5ddcfa 616 const Float_t vFrameLength = 4.0;
617 const Float_t vFrameHeight = sensHeight + hFrameHeight;
618 const Float_t vFrameWidth = sensWidth;
619 const Int_t vFrameMaterial = idGlass;
1e8fff9c 620
621 // B: the horizontal border filled with rohacell
6c5ddcfa 622 const Float_t bFrameLength = hFrameLength;
623 const Float_t bFrameHeight = (pcbHeight - sensHeight)/2. - hFrameHeight;
624 const Float_t bFrameWidth = hFrameWidth;
625 const Int_t bFrameMaterial = idRoha;
1e8fff9c 626
627 // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper)
6c5ddcfa 628 const Float_t nulocLength = 2.5;
629 const Float_t nulocHeight = 7.5;
630 const Float_t nulocWidth = 0.0030 + 0.0014; // equivalent copper width of vetronite;
631 const Int_t nulocMaterial = idCopper;
1e8fff9c 632
6c5ddcfa 633 const Float_t slatHeight = pcbHeight;
634 const Float_t slatWidth = sensWidth + 2.*(pcbWidth + insuWidth +
635 2.* panelWidth + rohaWidth);
636 const Int_t slatMaterial = idAir;
637 const Float_t dSlatLength = vFrameLength; // border on left and right
1e8fff9c 638
1e8fff9c 639 Float_t spar[3];
b17c0c87 640 Int_t i, j;
641
3c084d9f 642 // the panel volume contains the rohacell
643
644 Float_t twidth = 2 * panelWidth + rohaWidth;
645 Float_t panelpar[3] = { panelLength/2., panelHeight/2., twidth/2. };
b17c0c87 646 Float_t rohapar[3] = { rohaLength/2., rohaHeight/2., rohaWidth/2. };
3c084d9f 647
648 // insulating material contains PCB-> gas-> 2 borders filled with rohacell
649
650 twidth = 2*(insuWidth + pcbWidth) + sensWidth;
651 Float_t insupar[3] = { insuLength/2., insuHeight/2., twidth/2. };
652 twidth -= 2 * insuWidth;
653 Float_t pcbpar[3] = { pcbLength/2., pcbHeight/2., twidth/2. };
654 Float_t senspar[3] = { sensLength/2., sensHeight/2., sensWidth/2. };
655 Float_t theight = 2*hFrameHeight + sensHeight;
656 Float_t hFramepar[3]={hFrameLength/2., theight/2., hFrameWidth/2.};
b17c0c87 657 Float_t bFramepar[3]={bFrameLength/2., bFrameHeight/2., bFrameWidth/2.};
3c084d9f 658 Float_t vFramepar[3]={vFrameLength/2., vFrameHeight/2., vFrameWidth/2.};
b17c0c87 659 Float_t nulocpar[3]={nulocLength/2., nulocHeight/2., nulocWidth/2.};
b17c0c87 660 Float_t xx;
661 Float_t xxmax = (bFrameLength - nulocLength)/2.;
662 Int_t index=0;
663
664 if (stations[2]) {
665
666//********************************************************************
667// Station 3 **
668//********************************************************************
669 // indices 1 and 2 for first and second chambers in the station
670 // iChamber (first chamber) kept for other quanties than Z,
671 // assumed to be the same in both chambers
672 iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[4];
673 iChamber2 =(AliMUONChamber*) (*fChambers)[5];
674 zpos1=iChamber1->Z();
675 zpos2=iChamber2->Z();
676 dstation = zpos2 - zpos1;
677
b64652f5 678// zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2; // not used any more
b17c0c87 679//
680// Mother volume
681 tpar[0] = iChamber->RInner()-dframep;
682 tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi);
21a18f36 683 tpar[2] = dstation/5;
2724ae40 684
b74f1c6a 685 char *slats5Mother = "S05M";
686 char *slats6Mother = "S06M";
2724ae40 687 Float_t zoffs5 = 0;
688 Float_t zoffs6 = 0;
689
fe713e43 690 if (gAlice->GetModule("DIPO")) {
2724ae40 691 slats5Mother="DDIP";
692 slats6Mother="DDIP";
693
694 zoffs5 = zpos1;
695 zoffs6 = zpos2;
696 }
697 else {
b74f1c6a 698 gMC->Gsvolu("S05M", "TUBE", idAir, tpar, 3);
699 gMC->Gsvolu("S06M", "TUBE", idAir, tpar, 3);
700 gMC->Gspos("S05M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY");
701 gMC->Gspos("S06M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY");
2724ae40 702 }
703
b17c0c87 704 // volumes for slat geometry (xx=5,..,10 chamber id):
705 // Sxx0 Sxx1 Sxx2 Sxx3 --> Slat Mother volumes
706 // SxxG --> Sensitive volume (gas)
707 // SxxP --> PCB (copper)
708 // SxxI --> Insulator (vetronite)
709 // SxxC --> Carbon panel
710 // SxxR --> Rohacell
711 // SxxH, SxxV --> Horizontal and Vertical frames (vetronite)
21a18f36 712 // SB5x --> Volumes for the 35 cm long PCB
b17c0c87 713 // slat dimensions: slat is a MOTHER volume!!! made of air
714
21a18f36 715 // only for chamber 5: slat 1 has a PCB shorter by 5cm!
716
717 Float_t tlength = 35.;
718 Float_t panelpar2[3] = { tlength/2., panelpar[1], panelpar[2]};
719 Float_t rohapar2[3] = { tlength/2., rohapar[1], rohapar[2]};
720 Float_t insupar2[3] = { tlength/2., insupar[1], insupar[2]};
721 Float_t pcbpar2[3] = { tlength/2., pcbpar[1], pcbpar[2]};
722 Float_t senspar2[3] = { tlength/2., senspar[1], senspar[2]};
723 Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]};
724 Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]};
725
a083207d 726 const Int_t nSlats3 = 5; // number of slats per quadrant
727 const Int_t nPCB3[nSlats3] = {3,3,4,3,2}; // n PCB per slat
21a18f36 728 const Float_t xpos3[nSlats3] = {31., 40., 0., 0., 0.};
b17c0c87 729 Float_t slatLength3[nSlats3];
730
731 // create and position the slat (mother) volumes
732
6c5ddcfa 733 char volNam5[5];
734 char volNam6[5];
f9f7c205 735 Float_t xSlat3;
b17c0c87 736
21a18f36 737 Float_t spar2[3];
6c5ddcfa 738 for (i = 0; i<nSlats3; i++){
3c084d9f 739 slatLength3[i] = pcbLength * nPCB3[i] + 2. * dSlatLength;
a083207d 740 xSlat3 = slatLength3[i]/2. - vFrameLength/2. + xpos3[i];
21a18f36 741 if (i==1 || i==0) slatLength3[i] -= 2. *dSlatLength; // frame out in PCB with circular border
a083207d 742 Float_t ySlat31 = sensHeight * i - yOverlap * i;
743 Float_t ySlat32 = -sensHeight * i + yOverlap * i;
3c084d9f 744 spar[0] = slatLength3[i]/2.;
745 spar[1] = slatHeight/2.;
746 spar[2] = slatWidth/2. * 1.01;
21a18f36 747 // take away 5 cm from the first slat in chamber 5
748 Float_t xSlat32 = 0;
749 if (i==1 || i==2) { // 1 pcb is shortened by 5cm
750 spar2[0] = spar[0]-5./2.;
751 xSlat32 = xSlat3 - 5/2.;
752 }
753 else {
754 spar2[0] = spar[0];
755 xSlat32 = xSlat3;
756 }
757 spar2[1] = spar[1];
758 spar2[2] = spar[2];
3c084d9f 759 Float_t dzCh3=spar[2] * 1.01;
760 // zSlat to be checked (odd downstream or upstream?)
761 Float_t zSlat = (i%2 ==0)? -spar[2] : spar[2];
762 sprintf(volNam5,"S05%d",i);
21a18f36 763 gMC->Gsvolu(volNam5,"BOX",slatMaterial,spar2,3);
2724ae40 764 gMC->Gspos(volNam5, i*4+1,slats5Mother, xSlat32, ySlat31, zoffs5+zSlat+2.*dzCh3, 0, "ONLY");
765 gMC->Gspos(volNam5, i*4+2,slats5Mother,-xSlat32, ySlat31, zoffs5+zSlat-2.*dzCh3, 0, "ONLY");
21a18f36 766
a083207d 767 if (i>0) {
2724ae40 768 gMC->Gspos(volNam5, i*4+3,slats5Mother, xSlat32, ySlat32, zoffs5+zSlat+2.*dzCh3, 0, "ONLY");
769 gMC->Gspos(volNam5, i*4+4,slats5Mother,-xSlat32, ySlat32, zoffs5+zSlat-2.*dzCh3, 0, "ONLY");
a083207d 770 }
3c084d9f 771 sprintf(volNam6,"S06%d",i);
772 gMC->Gsvolu(volNam6,"BOX",slatMaterial,spar,3);
2724ae40 773 gMC->Gspos(volNam6, i*4+1,slats6Mother, xSlat3, ySlat31, zoffs6+zSlat+2.*dzCh3, 0, "ONLY");
774 gMC->Gspos(volNam6, i*4+2,slats6Mother,-xSlat3, ySlat31, zoffs6+zSlat-2.*dzCh3, 0, "ONLY");
a083207d 775 if (i>0) {
2724ae40 776 gMC->Gspos(volNam6, i*4+3,slats6Mother, xSlat3, ySlat32, zoffs6+zSlat+2.*dzCh3, 0, "ONLY");
777 gMC->Gspos(volNam6, i*4+4,slats6Mother,-xSlat3, ySlat32, zoffs6+zSlat-2.*dzCh3, 0, "ONLY");
a083207d 778 }
3c084d9f 779 }
1e8fff9c 780
781 // create the panel volume
b17c0c87 782
6c5ddcfa 783 gMC->Gsvolu("S05C","BOX",panelMaterial,panelpar,3);
21a18f36 784 gMC->Gsvolu("SB5C","BOX",panelMaterial,panelpar2,3);
6c5ddcfa 785 gMC->Gsvolu("S06C","BOX",panelMaterial,panelpar,3);
1e8fff9c 786
787 // create the rohacell volume
b17c0c87 788
6c5ddcfa 789 gMC->Gsvolu("S05R","BOX",rohaMaterial,rohapar,3);
21a18f36 790 gMC->Gsvolu("SB5R","BOX",rohaMaterial,rohapar2,3);
6c5ddcfa 791 gMC->Gsvolu("S06R","BOX",rohaMaterial,rohapar,3);
1e8fff9c 792
3c084d9f 793 // create the insulating material volume
794
795 gMC->Gsvolu("S05I","BOX",insuMaterial,insupar,3);
21a18f36 796 gMC->Gsvolu("SB5I","BOX",insuMaterial,insupar2,3);
3c084d9f 797 gMC->Gsvolu("S06I","BOX",insuMaterial,insupar,3);
798
799 // create the PCB volume
800
801 gMC->Gsvolu("S05P","BOX",pcbMaterial,pcbpar,3);
21a18f36 802 gMC->Gsvolu("SB5P","BOX",pcbMaterial,pcbpar2,3);
3c084d9f 803 gMC->Gsvolu("S06P","BOX",pcbMaterial,pcbpar,3);
804
805 // create the sensitive volumes,
3f08857e 806 gMC->Gsvolu("S05G","BOX",sensMaterial,dum,0);
807 gMC->Gsvolu("S06G","BOX",sensMaterial,dum,0);
3c084d9f 808
809
1e8fff9c 810 // create the vertical frame volume
b17c0c87 811
6c5ddcfa 812 gMC->Gsvolu("S05V","BOX",vFrameMaterial,vFramepar,3);
813 gMC->Gsvolu("S06V","BOX",vFrameMaterial,vFramepar,3);
1e8fff9c 814
815 // create the horizontal frame volume
b17c0c87 816
6c5ddcfa 817 gMC->Gsvolu("S05H","BOX",hFrameMaterial,hFramepar,3);
21a18f36 818 gMC->Gsvolu("SB5H","BOX",hFrameMaterial,hFramepar2,3);
6c5ddcfa 819 gMC->Gsvolu("S06H","BOX",hFrameMaterial,hFramepar,3);
1e8fff9c 820
821 // create the horizontal border volume
b17c0c87 822
6c5ddcfa 823 gMC->Gsvolu("S05B","BOX",bFrameMaterial,bFramepar,3);
21a18f36 824 gMC->Gsvolu("SB5B","BOX",bFrameMaterial,bFramepar2,3);
6c5ddcfa 825 gMC->Gsvolu("S06B","BOX",bFrameMaterial,bFramepar,3);
1e8fff9c 826
b17c0c87 827 index=0;
6c5ddcfa 828 for (i = 0; i<nSlats3; i++){
829 sprintf(volNam5,"S05%d",i);
830 sprintf(volNam6,"S06%d",i);
f9f7c205 831 Float_t xvFrame = (slatLength3[i] - vFrameLength)/2.;
21a18f36 832 Float_t xvFrame2 = xvFrame;
833 if ( i==1 || i ==2 ) xvFrame2 -= 5./2.;
3c084d9f 834 // position the vertical frames
21a18f36 835 if (i!=1 && i!=0) {
836 gMC->Gspos("S05V",2*i-1,volNam5, xvFrame2, 0., 0. , 0, "ONLY");
837 gMC->Gspos("S05V",2*i ,volNam5,-xvFrame2, 0., 0. , 0, "ONLY");
3c084d9f 838 gMC->Gspos("S06V",2*i-1,volNam6, xvFrame, 0., 0. , 0, "ONLY");
839 gMC->Gspos("S06V",2*i ,volNam6,-xvFrame, 0., 0. , 0, "ONLY");
840 }
841 // position the panels and the insulating material
6c5ddcfa 842 for (j=0; j<nPCB3[i]; j++){
1e8fff9c 843 index++;
6c5ddcfa 844 Float_t xx = sensLength * (-nPCB3[i]/2.+j+.5);
21a18f36 845 Float_t xx2 = xx + 5/2.;
3c084d9f 846
847 Float_t zPanel = spar[2] - panelpar[2];
21a18f36 848 if ( (i==1 || i==2) && j == nPCB3[i]-1) { // 1 pcb is shortened by 5cm
849 gMC->Gspos("SB5C",2*index-1,volNam5, xx, 0., zPanel , 0, "ONLY");
850 gMC->Gspos("SB5C",2*index ,volNam5, xx, 0.,-zPanel , 0, "ONLY");
851 gMC->Gspos("SB5I",index ,volNam5, xx, 0., 0 , 0, "ONLY");
852 }
853 else if ( (i==1 || i==2) && j < nPCB3[i]-1) {
854 gMC->Gspos("S05C",2*index-1,volNam5, xx2, 0., zPanel , 0, "ONLY");
855 gMC->Gspos("S05C",2*index ,volNam5, xx2, 0.,-zPanel , 0, "ONLY");
856 gMC->Gspos("S05I",index ,volNam5, xx2, 0., 0 , 0, "ONLY");
857 }
858 else {
859 gMC->Gspos("S05C",2*index-1,volNam5, xx, 0., zPanel , 0, "ONLY");
860 gMC->Gspos("S05C",2*index ,volNam5, xx, 0.,-zPanel , 0, "ONLY");
861 gMC->Gspos("S05I",index ,volNam5, xx, 0., 0 , 0, "ONLY");
862 }
3c084d9f 863 gMC->Gspos("S06C",2*index-1,volNam6, xx, 0., zPanel , 0, "ONLY");
864 gMC->Gspos("S06C",2*index ,volNam6, xx, 0.,-zPanel , 0, "ONLY");
3c084d9f 865 gMC->Gspos("S06I",index,volNam6, xx, 0., 0 , 0, "ONLY");
1e8fff9c 866 }
a9e2aefa 867 }
21a18f36 868
3c084d9f 869 // position the rohacell volume inside the panel volume
870 gMC->Gspos("S05R",1,"S05C",0.,0.,0.,0,"ONLY");
21a18f36 871 gMC->Gspos("SB5R",1,"SB5C",0.,0.,0.,0,"ONLY");
3c084d9f 872 gMC->Gspos("S06R",1,"S06C",0.,0.,0.,0,"ONLY");
873
874 // position the PCB volume inside the insulating material volume
875 gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY");
21a18f36 876 gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY");
3c084d9f 877 gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY");
878 // position the horizontal frame volume inside the PCB volume
879 gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY");
21a18f36 880 gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY");
3c084d9f 881 gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY");
882 // position the sensitive volume inside the horizontal frame volume
883 gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3);
21a18f36 884 gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3);
3c084d9f 885 gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3);
886 // position the border volumes inside the PCB volume
887 Float_t yborder = ( pcbHeight - bFrameHeight ) / 2.;
888 gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY");
889 gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY");
21a18f36 890 gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY");
891 gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY");
3c084d9f 892 gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY");
893 gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY");
894
1e8fff9c 895 // create the NULOC volume and position it in the horizontal frame
b17c0c87 896
6c5ddcfa 897 gMC->Gsvolu("S05N","BOX",nulocMaterial,nulocpar,3);
898 gMC->Gsvolu("S06N","BOX",nulocMaterial,nulocpar,3);
6c5ddcfa 899 index = 0;
21a18f36 900 Float_t xxmax2 = xxmax - 5./2.;
901 for (xx = -xxmax; xx<=xxmax; xx+=2*nulocLength) {
1e8fff9c 902 index++;
6c5ddcfa 903 gMC->Gspos("S05N",2*index-1,"S05B", xx, 0.,-bFrameWidth/4., 0, "ONLY");
904 gMC->Gspos("S05N",2*index ,"S05B", xx, 0., bFrameWidth/4., 0, "ONLY");
21a18f36 905 if (xx > -xxmax2 && xx< xxmax2) {
906 gMC->Gspos("S05N",2*index-1,"SB5B", xx, 0.,-bFrameWidth/4., 0, "ONLY");
907 gMC->Gspos("S05N",2*index ,"SB5B", xx, 0., bFrameWidth/4., 0, "ONLY");
908 }
6c5ddcfa 909 gMC->Gspos("S06N",2*index-1,"S06B", xx, 0.,-bFrameWidth/4., 0, "ONLY");
910 gMC->Gspos("S06N",2*index ,"S06B", xx, 0., bFrameWidth/4., 0, "ONLY");
1e8fff9c 911 }
3c084d9f 912
913 // position the volumes approximating the circular section of the pipe
a083207d 914 Float_t yoffs = sensHeight/2. - yOverlap;
3c084d9f 915 Float_t epsilon = 0.001;
916 Int_t ndiv=6;
917 Float_t divpar[3];
918 Double_t dydiv= sensHeight/ndiv;
21a18f36 919 Double_t ydiv = yoffs -dydiv;
3c084d9f 920 Int_t imax=0;
3c084d9f 921 imax = 1;
21a18f36 922 Float_t rmin = 33.;
a083207d 923 Float_t z1 = spar[2], z2=2*spar[2]*1.01;
3c084d9f 924 for (Int_t idiv=0;idiv<ndiv; idiv++){
925 ydiv+= dydiv;
425ebd0a 926 Float_t xdiv = 0.;
3c084d9f 927 if (ydiv<rmin) xdiv= rmin * TMath::Sin( TMath::ACos(ydiv/rmin) );
928 divpar[0] = (pcbLength-xdiv)/2.;
929 divpar[1] = dydiv/2. - epsilon;
930 divpar[2] = sensWidth/2.;
425ebd0a 931 Float_t xvol=(pcbLength+xdiv)/2.+1.999;
a083207d 932 Float_t yvol=ydiv + dydiv/2.;
21a18f36 933 //printf ("y ll = %f y ur = %f \n",yvol - divpar[1], yvol + divpar[1]);
2724ae40 934 gMC->Gsposp("S05G",imax+4*idiv+1,slats5Mother, xvol, yvol, zoffs5+z1+z2, 0, "ONLY",divpar,3);
935 gMC->Gsposp("S06G",imax+4*idiv+1,slats6Mother, xvol, yvol, zoffs6+z1+z2, 0, "ONLY",divpar,3);
936 gMC->Gsposp("S05G",imax+4*idiv+2,slats5Mother, xvol,-yvol, zoffs5+z1+z2, 0, "ONLY",divpar,3);
937 gMC->Gsposp("S06G",imax+4*idiv+2,slats6Mother, xvol,-yvol, zoffs6+z1+z2, 0, "ONLY",divpar,3);
938 gMC->Gsposp("S05G",imax+4*idiv+3,slats5Mother,-xvol, yvol, zoffs5+z1-z2, 0, "ONLY",divpar,3);
939 gMC->Gsposp("S06G",imax+4*idiv+3,slats6Mother,-xvol, yvol, zoffs6+z1-z2, 0, "ONLY",divpar,3);
940 gMC->Gsposp("S05G",imax+4*idiv+4,slats5Mother,-xvol,-yvol, zoffs5+z1-z2, 0, "ONLY",divpar,3);
941 gMC->Gsposp("S06G",imax+4*idiv+4,slats6Mother,-xvol,-yvol, zoffs6+z1-z2, 0, "ONLY",divpar,3);
3c084d9f 942 }
b17c0c87 943 }
b17c0c87 944
3c084d9f 945 if (stations[3]) {
946
a9e2aefa 947//********************************************************************
948// Station 4 **
949//********************************************************************
950 // indices 1 and 2 for first and second chambers in the station
951 // iChamber (first chamber) kept for other quanties than Z,
952 // assumed to be the same in both chambers
953 iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[6];
954 iChamber2 =(AliMUONChamber*) (*fChambers)[7];
955 zpos1=iChamber1->Z();
956 zpos2=iChamber2->Z();
957 dstation = zpos2 - zpos1;
b64652f5 958// zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2; // not used any more
a9e2aefa 959
960//
961// Mother volume
962 tpar[0] = iChamber->RInner()-dframep;
963 tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi);
2724ae40 964 tpar[2] = dstation/4;
a9e2aefa 965
b74f1c6a 966 gMC->Gsvolu("S07M", "TUBE", idAir, tpar, 3);
967 gMC->Gsvolu("S08M", "TUBE", idAir, tpar, 3);
968 gMC->Gspos("S07M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY");
969 gMC->Gspos("S08M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY");
1e8fff9c 970
a9e2aefa 971
f9f7c205 972 const Int_t nSlats4 = 6; // number of slats per quadrant
425ebd0a 973 const Int_t nPCB4[nSlats4] = {4,4,5,5,4,3}; // n PCB per slat
21a18f36 974 const Float_t xpos4[nSlats4] = {38.5, 40., 0., 0., 0., 0.};
6c5ddcfa 975 Float_t slatLength4[nSlats4];
1e8fff9c 976
977 // create and position the slat (mother) volumes
978
6c5ddcfa 979 char volNam7[5];
980 char volNam8[5];
1e8fff9c 981 Float_t xSlat4;
f9f7c205 982 Float_t ySlat4;
1e8fff9c 983
6c5ddcfa 984 for (i = 0; i<nSlats4; i++){
a083207d 985 slatLength4[i] = pcbLength * nPCB4[i] + 2. * dSlatLength;
986 xSlat4 = slatLength4[i]/2. - vFrameLength/2. + xpos4[i];
2724ae40 987 if (i==1) slatLength4[i] -= 2. *dSlatLength; // frame out in PCB with circular border
a083207d 988 ySlat4 = sensHeight * i - yOverlap *i;
989
990 spar[0] = slatLength4[i]/2.;
991 spar[1] = slatHeight/2.;
992 spar[2] = slatWidth/2.*1.01;
993 Float_t dzCh4=spar[2]*1.01;
994 // zSlat to be checked (odd downstream or upstream?)
995 Float_t zSlat = (i%2 ==0)? spar[2] : -spar[2];
996 sprintf(volNam7,"S07%d",i);
997 gMC->Gsvolu(volNam7,"BOX",slatMaterial,spar,3);
b74f1c6a 998 gMC->Gspos(volNam7, i*4+1,"S07M", xSlat4, ySlat4, zSlat+2.*dzCh4, 0, "ONLY");
999 gMC->Gspos(volNam7, i*4+2,"S07M",-xSlat4, ySlat4, zSlat-2.*dzCh4, 0, "ONLY");
a083207d 1000 if (i>0) {
b74f1c6a 1001 gMC->Gspos(volNam7, i*4+3,"S07M", xSlat4,-ySlat4, zSlat+2.*dzCh4, 0, "ONLY");
1002 gMC->Gspos(volNam7, i*4+4,"S07M",-xSlat4,-ySlat4, zSlat-2.*dzCh4, 0, "ONLY");
a083207d 1003 }
1004 sprintf(volNam8,"S08%d",i);
1005 gMC->Gsvolu(volNam8,"BOX",slatMaterial,spar,3);
b74f1c6a 1006 gMC->Gspos(volNam8, i*4+1,"S08M", xSlat4, ySlat4, zSlat+2.*dzCh4, 0, "ONLY");
1007 gMC->Gspos(volNam8, i*4+2,"S08M",-xSlat4, ySlat4, zSlat-2.*dzCh4, 0, "ONLY");
a083207d 1008 if (i>0) {
b74f1c6a 1009 gMC->Gspos(volNam8, i*4+3,"S08M", xSlat4,-ySlat4, zSlat+2.*dzCh4, 0, "ONLY");
1010 gMC->Gspos(volNam8, i*4+4,"S08M",-xSlat4,-ySlat4, zSlat-2.*dzCh4, 0, "ONLY");
a083207d 1011 }
a9e2aefa 1012 }
a083207d 1013
3c084d9f 1014
1015 // create the panel volume
1e8fff9c 1016
3c084d9f 1017 gMC->Gsvolu("S07C","BOX",panelMaterial,panelpar,3);
1018 gMC->Gsvolu("S08C","BOX",panelMaterial,panelpar,3);
a9e2aefa 1019
3c084d9f 1020 // create the rohacell volume
1021
1022 gMC->Gsvolu("S07R","BOX",rohaMaterial,rohapar,3);
1023 gMC->Gsvolu("S08R","BOX",rohaMaterial,rohapar,3);
1e8fff9c 1024
1e8fff9c 1025 // create the insulating material volume
1026
6c5ddcfa 1027 gMC->Gsvolu("S07I","BOX",insuMaterial,insupar,3);
1028 gMC->Gsvolu("S08I","BOX",insuMaterial,insupar,3);
1e8fff9c 1029
3c084d9f 1030 // create the PCB volume
1e8fff9c 1031
3c084d9f 1032 gMC->Gsvolu("S07P","BOX",pcbMaterial,pcbpar,3);
1033 gMC->Gsvolu("S08P","BOX",pcbMaterial,pcbpar,3);
1e8fff9c 1034
3c084d9f 1035 // create the sensitive volumes,
1036
3f08857e 1037 gMC->Gsvolu("S07G","BOX",sensMaterial,dum,0);
1038 gMC->Gsvolu("S08G","BOX",sensMaterial,dum,0);
1e8fff9c 1039
1040 // create the vertical frame volume
1041
6c5ddcfa 1042 gMC->Gsvolu("S07V","BOX",vFrameMaterial,vFramepar,3);
1043 gMC->Gsvolu("S08V","BOX",vFrameMaterial,vFramepar,3);
1e8fff9c 1044
1045 // create the horizontal frame volume
1046
6c5ddcfa 1047 gMC->Gsvolu("S07H","BOX",hFrameMaterial,hFramepar,3);
1048 gMC->Gsvolu("S08H","BOX",hFrameMaterial,hFramepar,3);
1e8fff9c 1049
1050 // create the horizontal border volume
1051
6c5ddcfa 1052 gMC->Gsvolu("S07B","BOX",bFrameMaterial,bFramepar,3);
1053 gMC->Gsvolu("S08B","BOX",bFrameMaterial,bFramepar,3);
3c084d9f 1054
1055 index=0;
6c5ddcfa 1056 for (i = 0; i<nSlats4; i++){
1057 sprintf(volNam7,"S07%d",i);
1058 sprintf(volNam8,"S08%d",i);
1059 Float_t xvFrame = (slatLength4[i] - vFrameLength)/2.;
3c084d9f 1060 // position the vertical frames
21a18f36 1061 if (i!=1 && i!=0) {
a083207d 1062 gMC->Gspos("S07V",2*i-1,volNam7, xvFrame, 0., 0. , 0, "ONLY");
1063 gMC->Gspos("S07V",2*i ,volNam7,-xvFrame, 0., 0. , 0, "ONLY");
1064 gMC->Gspos("S08V",2*i-1,volNam8, xvFrame, 0., 0. , 0, "ONLY");
1065 gMC->Gspos("S08V",2*i ,volNam8,-xvFrame, 0., 0. , 0, "ONLY");
1066 }
3c084d9f 1067 // position the panels and the insulating material
6c5ddcfa 1068 for (j=0; j<nPCB4[i]; j++){
1e8fff9c 1069 index++;
6c5ddcfa 1070 Float_t xx = sensLength * (-nPCB4[i]/2.+j+.5);
3c084d9f 1071
1072 Float_t zPanel = spar[2] - panelpar[2];
1073 gMC->Gspos("S07C",2*index-1,volNam7, xx, 0., zPanel , 0, "ONLY");
1074 gMC->Gspos("S07C",2*index ,volNam7, xx, 0.,-zPanel , 0, "ONLY");
1075 gMC->Gspos("S08C",2*index-1,volNam8, xx, 0., zPanel , 0, "ONLY");
1076 gMC->Gspos("S08C",2*index ,volNam8, xx, 0.,-zPanel , 0, "ONLY");
1077
1078 gMC->Gspos("S07I",index,volNam7, xx, 0., 0 , 0, "ONLY");
1079 gMC->Gspos("S08I",index,volNam8, xx, 0., 0 , 0, "ONLY");
1e8fff9c 1080 }
a9e2aefa 1081 }
1e8fff9c 1082
3c084d9f 1083 // position the rohacell volume inside the panel volume
1084 gMC->Gspos("S07R",1,"S07C",0.,0.,0.,0,"ONLY");
1085 gMC->Gspos("S08R",1,"S08C",0.,0.,0.,0,"ONLY");
1086
1087 // position the PCB volume inside the insulating material volume
1088 gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY");
1089 gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY");
1090 // position the horizontal frame volume inside the PCB volume
1091 gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY");
1092 gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY");
1093 // position the sensitive volume inside the horizontal frame volume
1094 gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3);
1095 gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3);
3c084d9f 1096 // position the border volumes inside the PCB volume
1097 Float_t yborder = ( pcbHeight - bFrameHeight ) / 2.;
1098 gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY");
1099 gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY");
1100 gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY");
1101 gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY");
1102
1e8fff9c 1103 // create the NULOC volume and position it in the horizontal frame
3c084d9f 1104
6c5ddcfa 1105 gMC->Gsvolu("S07N","BOX",nulocMaterial,nulocpar,3);
1106 gMC->Gsvolu("S08N","BOX",nulocMaterial,nulocpar,3);
3c084d9f 1107 index = 0;
21a18f36 1108 for (xx = -xxmax; xx<=xxmax; xx+=2*nulocLength) {
1e8fff9c 1109 index++;
6c5ddcfa 1110 gMC->Gspos("S07N",2*index-1,"S07B", xx, 0.,-bFrameWidth/4., 0, "ONLY");
1111 gMC->Gspos("S07N",2*index ,"S07B", xx, 0., bFrameWidth/4., 0, "ONLY");
1112 gMC->Gspos("S08N",2*index-1,"S08B", xx, 0.,-bFrameWidth/4., 0, "ONLY");
1113 gMC->Gspos("S08N",2*index ,"S08B", xx, 0., bFrameWidth/4., 0, "ONLY");
1e8fff9c 1114 }
a083207d 1115
1116 // position the volumes approximating the circular section of the pipe
21a18f36 1117 Float_t yoffs = sensHeight/2. - yOverlap;
a083207d 1118 Float_t epsilon = 0.001;
1119 Int_t ndiv=6;
1120 Float_t divpar[3];
1121 Double_t dydiv= sensHeight/ndiv;
21a18f36 1122 Double_t ydiv = yoffs -dydiv;
a083207d 1123 Int_t imax=0;
a083207d 1124 imax = 1;
1125 Float_t rmin = 40.;
1126 Float_t z1 = -spar[2], z2=2*spar[2]*1.01;
1127 for (Int_t idiv=0;idiv<ndiv; idiv++){
1128 ydiv+= dydiv;
425ebd0a 1129 Float_t xdiv = 0.;
a083207d 1130 if (ydiv<rmin) xdiv= rmin * TMath::Sin( TMath::ACos(ydiv/rmin) );
1131 divpar[0] = (pcbLength-xdiv)/2.;
1132 divpar[1] = dydiv/2. - epsilon;
1133 divpar[2] = sensWidth/2.;
425ebd0a 1134 Float_t xvol=(pcbLength+xdiv)/2.+1.999;
a083207d 1135 Float_t yvol=ydiv + dydiv/2.;
b74f1c6a 1136 gMC->Gsposp("S07G",imax+4*idiv+1,"S07M", xvol, yvol, z1+z2, 0, "ONLY",divpar,3);
1137 gMC->Gsposp("S08G",imax+4*idiv+1,"S08M", xvol, yvol, z1+z2, 0, "ONLY",divpar,3);
1138 gMC->Gsposp("S07G",imax+4*idiv+2,"S07M", xvol,-yvol, z1+z2, 0, "ONLY",divpar,3);
1139 gMC->Gsposp("S08G",imax+4*idiv+2,"S08M", xvol,-yvol, z1+z2, 0, "ONLY",divpar,3);
1140 gMC->Gsposp("S07G",imax+4*idiv+3,"S07M",-xvol, yvol, z1-z2, 0, "ONLY",divpar,3);
1141 gMC->Gsposp("S08G",imax+4*idiv+3,"S08M",-xvol, yvol, z1-z2, 0, "ONLY",divpar,3);
1142 gMC->Gsposp("S07G",imax+4*idiv+4,"S07M",-xvol,-yvol, z1-z2, 0, "ONLY",divpar,3);
1143 gMC->Gsposp("S08G",imax+4*idiv+4,"S08M",-xvol,-yvol, z1-z2, 0, "ONLY",divpar,3);
a083207d 1144 }
1145
1146
1147
1148
1149
b17c0c87 1150 }
3c084d9f 1151
b17c0c87 1152 if (stations[4]) {
1153
1e8fff9c 1154
a9e2aefa 1155//********************************************************************
1156// Station 5 **
1157//********************************************************************
1158 // indices 1 and 2 for first and second chambers in the station
1159 // iChamber (first chamber) kept for other quanties than Z,
1160 // assumed to be the same in both chambers
1161 iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[8];
1162 iChamber2 =(AliMUONChamber*) (*fChambers)[9];
1163 zpos1=iChamber1->Z();
1164 zpos2=iChamber2->Z();
1165 dstation = zpos2 - zpos1;
b64652f5 1166// zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2; // not used any more
3c084d9f 1167
a9e2aefa 1168//
1169// Mother volume
1170 tpar[0] = iChamber->RInner()-dframep;
1171 tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi);
3c084d9f 1172 tpar[2] = dstation/5.;
a9e2aefa 1173
b74f1c6a 1174 gMC->Gsvolu("S09M", "TUBE", idAir, tpar, 3);
1175 gMC->Gsvolu("S10M", "TUBE", idAir, tpar, 3);
1176 gMC->Gspos("S09M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY");
1177 gMC->Gspos("S10M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY");
a9e2aefa 1178
a9e2aefa 1179
1e8fff9c 1180 const Int_t nSlats5 = 7; // number of slats per quadrant
a083207d 1181 const Int_t nPCB5[nSlats5] = {5,5,6,6,5,4,3}; // n PCB per slat
21a18f36 1182 const Float_t xpos5[nSlats5] = {38.5, 40., 0., 0., 0., 0., 0.};
6c5ddcfa 1183 Float_t slatLength5[nSlats5];
6c5ddcfa 1184 char volNam9[5];
1185 char volNam10[5];
f9f7c205 1186 Float_t xSlat5;
1187 Float_t ySlat5;
1e8fff9c 1188
6c5ddcfa 1189 for (i = 0; i<nSlats5; i++){
1190 slatLength5[i] = pcbLength * nPCB5[i] + 2. * dSlatLength;
a083207d 1191 xSlat5 = slatLength5[i]/2. - vFrameLength/2. +xpos5[i];
21a18f36 1192 if (i==1 || i==0) slatLength5[i] -= 2. *dSlatLength; // frame out in PCB with circular border
f9f7c205 1193 ySlat5 = sensHeight * i - yOverlap * i;
6c5ddcfa 1194 spar[0] = slatLength5[i]/2.;
1195 spar[1] = slatHeight/2.;
3c084d9f 1196 spar[2] = slatWidth/2. * 1.01;
1197 Float_t dzCh5=spar[2]*1.01;
1e8fff9c 1198 // zSlat to be checked (odd downstream or upstream?)
3c084d9f 1199 Float_t zSlat = (i%2 ==0)? -spar[2] : spar[2];
6c5ddcfa 1200 sprintf(volNam9,"S09%d",i);
1201 gMC->Gsvolu(volNam9,"BOX",slatMaterial,spar,3);
b74f1c6a 1202 gMC->Gspos(volNam9, i*4+1,"S09M", xSlat5, ySlat5, zSlat+2.*dzCh5, 0, "ONLY");
1203 gMC->Gspos(volNam9, i*4+2,"S09M",-xSlat5, ySlat5, zSlat-2.*dzCh5, 0, "ONLY");
f9f7c205 1204 if (i>0) {
b74f1c6a 1205 gMC->Gspos(volNam9, i*4+3,"S09M", xSlat5,-ySlat5, zSlat+2.*dzCh5, 0, "ONLY");
1206 gMC->Gspos(volNam9, i*4+4,"S09M",-xSlat5,-ySlat5, zSlat-2.*dzCh5, 0, "ONLY");
f9f7c205 1207 }
6c5ddcfa 1208 sprintf(volNam10,"S10%d",i);
1209 gMC->Gsvolu(volNam10,"BOX",slatMaterial,spar,3);
b74f1c6a 1210 gMC->Gspos(volNam10, i*4+1,"S10M", xSlat5, ySlat5, zSlat+2.*dzCh5, 0, "ONLY");
1211 gMC->Gspos(volNam10, i*4+2,"S10M",-xSlat5, ySlat5, zSlat-2.*dzCh5, 0, "ONLY");
f9f7c205 1212 if (i>0) {
b74f1c6a 1213 gMC->Gspos(volNam10, i*4+3,"S10M", xSlat5,-ySlat5, zSlat+2.*dzCh5, 0, "ONLY");
1214 gMC->Gspos(volNam10, i*4+4,"S10M",-xSlat5,-ySlat5, zSlat-2.*dzCh5, 0, "ONLY");
f9f7c205 1215 }
a9e2aefa 1216 }
1217
1e8fff9c 1218 // create the panel volume
3c084d9f 1219
6c5ddcfa 1220 gMC->Gsvolu("S09C","BOX",panelMaterial,panelpar,3);
1221 gMC->Gsvolu("S10C","BOX",panelMaterial,panelpar,3);
3c084d9f 1222
1e8fff9c 1223 // create the rohacell volume
3c084d9f 1224
6c5ddcfa 1225 gMC->Gsvolu("S09R","BOX",rohaMaterial,rohapar,3);
1226 gMC->Gsvolu("S10R","BOX",rohaMaterial,rohapar,3);
3c084d9f 1227
1228 // create the insulating material volume
1229
1230 gMC->Gsvolu("S09I","BOX",insuMaterial,insupar,3);
1231 gMC->Gsvolu("S10I","BOX",insuMaterial,insupar,3);
1232
1233 // create the PCB volume
1234
1235 gMC->Gsvolu("S09P","BOX",pcbMaterial,pcbpar,3);
1236 gMC->Gsvolu("S10P","BOX",pcbMaterial,pcbpar,3);
1237
1238 // create the sensitive volumes,
1239
3f08857e 1240 gMC->Gsvolu("S09G","BOX",sensMaterial,dum,0);
1241 gMC->Gsvolu("S10G","BOX",sensMaterial,dum,0);
3c084d9f 1242
1e8fff9c 1243 // create the vertical frame volume
3c084d9f 1244
6c5ddcfa 1245 gMC->Gsvolu("S09V","BOX",vFrameMaterial,vFramepar,3);
1246 gMC->Gsvolu("S10V","BOX",vFrameMaterial,vFramepar,3);
1e8fff9c 1247
1248 // create the horizontal frame volume
3c084d9f 1249
6c5ddcfa 1250 gMC->Gsvolu("S09H","BOX",hFrameMaterial,hFramepar,3);
1251 gMC->Gsvolu("S10H","BOX",hFrameMaterial,hFramepar,3);
1e8fff9c 1252
1253 // create the horizontal border volume
1254
6c5ddcfa 1255 gMC->Gsvolu("S09B","BOX",bFrameMaterial,bFramepar,3);
1256 gMC->Gsvolu("S10B","BOX",bFrameMaterial,bFramepar,3);
1e8fff9c 1257
3c084d9f 1258 index=0;
6c5ddcfa 1259 for (i = 0; i<nSlats5; i++){
1260 sprintf(volNam9,"S09%d",i);
1261 sprintf(volNam10,"S10%d",i);
1262 Float_t xvFrame = (slatLength5[i] - vFrameLength)/2.;
3c084d9f 1263 // position the vertical frames
21a18f36 1264 if (i!=1 && i!=0) {
a083207d 1265 gMC->Gspos("S09V",2*i-1,volNam9, xvFrame, 0., 0. , 0, "ONLY");
1266 gMC->Gspos("S09V",2*i ,volNam9,-xvFrame, 0., 0. , 0, "ONLY");
1267 gMC->Gspos("S10V",2*i-1,volNam10, xvFrame, 0., 0. , 0, "ONLY");
1268 gMC->Gspos("S10V",2*i ,volNam10,-xvFrame, 0., 0. , 0, "ONLY");
1269 }
3c084d9f 1270
1271 // position the panels and the insulating material
6c5ddcfa 1272 for (j=0; j<nPCB5[i]; j++){
1e8fff9c 1273 index++;
3c084d9f 1274 Float_t xx = sensLength * (-nPCB5[i]/2.+j+.5);
1275
1276 Float_t zPanel = spar[2] - panelpar[2];
1277 gMC->Gspos("S09C",2*index-1,volNam9, xx, 0., zPanel , 0, "ONLY");
1278 gMC->Gspos("S09C",2*index ,volNam9, xx, 0.,-zPanel , 0, "ONLY");
1279 gMC->Gspos("S10C",2*index-1,volNam10, xx, 0., zPanel , 0, "ONLY");
1280 gMC->Gspos("S10C",2*index ,volNam10, xx, 0.,-zPanel , 0, "ONLY");
1281
1282 gMC->Gspos("S09I",index,volNam9, xx, 0., 0 , 0, "ONLY");
1283 gMC->Gspos("S10I",index,volNam10, xx, 0., 0 , 0, "ONLY");
1e8fff9c 1284 }
1285 }
1286
3c084d9f 1287 // position the rohacell volume inside the panel volume
1288 gMC->Gspos("S09R",1,"S09C",0.,0.,0.,0,"ONLY");
1289 gMC->Gspos("S10R",1,"S10C",0.,0.,0.,0,"ONLY");
1290
1291 // position the PCB volume inside the insulating material volume
1292 gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY");
1293 gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY");
1294 // position the horizontal frame volume inside the PCB volume
1295 gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY");
1296 gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY");
1297 // position the sensitive volume inside the horizontal frame volume
1298 gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3);
1299 gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3);
3c084d9f 1300 // position the border volumes inside the PCB volume
1301 Float_t yborder = ( pcbHeight - bFrameHeight ) / 2.;
1302 gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY");
1303 gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY");
1304 gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY");
1305 gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY");
1306
1e8fff9c 1307 // create the NULOC volume and position it in the horizontal frame
3c084d9f 1308
6c5ddcfa 1309 gMC->Gsvolu("S09N","BOX",nulocMaterial,nulocpar,3);
1310 gMC->Gsvolu("S10N","BOX",nulocMaterial,nulocpar,3);
3c084d9f 1311 index = 0;
21a18f36 1312 for (xx = -xxmax; xx<=xxmax; xx+=2*nulocLength) {
1e8fff9c 1313 index++;
6c5ddcfa 1314 gMC->Gspos("S09N",2*index-1,"S09B", xx, 0.,-bFrameWidth/4., 0, "ONLY");
1315 gMC->Gspos("S09N",2*index ,"S09B", xx, 0., bFrameWidth/4., 0, "ONLY");
1316 gMC->Gspos("S10N",2*index-1,"S10B", xx, 0.,-bFrameWidth/4., 0, "ONLY");
1317 gMC->Gspos("S10N",2*index ,"S10B", xx, 0., bFrameWidth/4., 0, "ONLY");
a9e2aefa 1318 }
a083207d 1319 // position the volumes approximating the circular section of the pipe
21a18f36 1320 Float_t yoffs = sensHeight/2. - yOverlap;
a083207d 1321 Float_t epsilon = 0.001;
1322 Int_t ndiv=6;
1323 Float_t divpar[3];
1324 Double_t dydiv= sensHeight/ndiv;
21a18f36 1325 Double_t ydiv = yoffs -dydiv;
a083207d 1326 Int_t imax=0;
1327 // for (Int_t islat=0; islat<nSlats3; islat++) imax += nPCB3[islat];
1328 imax = 1;
1329 Float_t rmin = 40.;
1330 Float_t z1 = spar[2], z2=2*spar[2]*1.01;
1331 for (Int_t idiv=0;idiv<ndiv; idiv++){
1332 ydiv+= dydiv;
425ebd0a 1333 Float_t xdiv = 0.;
a083207d 1334 if (ydiv<rmin) xdiv= rmin * TMath::Sin( TMath::ACos(ydiv/rmin) );
1335 divpar[0] = (pcbLength-xdiv)/2.;
1336 divpar[1] = dydiv/2. - epsilon;
1337 divpar[2] = sensWidth/2.;
425ebd0a 1338 Float_t xvol=(pcbLength+xdiv)/2. + 1.999;
a083207d 1339 Float_t yvol=ydiv + dydiv/2.;
b74f1c6a 1340 gMC->Gsposp("S09G",imax+4*idiv+1,"S09M", xvol, yvol, z1+z2, 0, "ONLY",divpar,3);
1341 gMC->Gsposp("S10G",imax+4*idiv+1,"S10M", xvol, yvol, z1+z2, 0, "ONLY",divpar,3);
1342 gMC->Gsposp("S09G",imax+4*idiv+2,"S09M", xvol,-yvol, z1+z2, 0, "ONLY",divpar,3);
1343 gMC->Gsposp("S10G",imax+4*idiv+2,"S10M", xvol,-yvol, z1+z2, 0, "ONLY",divpar,3);
1344 gMC->Gsposp("S09G",imax+4*idiv+3,"S09M",-xvol, yvol, z1-z2, 0, "ONLY",divpar,3);
1345 gMC->Gsposp("S10G",imax+4*idiv+3,"S10M",-xvol, yvol, z1-z2, 0, "ONLY",divpar,3);
1346 gMC->Gsposp("S09G",imax+4*idiv+4,"S09M",-xvol,-yvol, z1-z2, 0, "ONLY",divpar,3);
1347 gMC->Gsposp("S10G",imax+4*idiv+4,"S10M",-xvol,-yvol, z1-z2, 0, "ONLY",divpar,3);
a083207d 1348 }
1349
b17c0c87 1350 }
1351
1e8fff9c 1352
a9e2aefa 1353///////////////////////////////////////
1354// GEOMETRY FOR THE TRIGGER CHAMBERS //
1355///////////////////////////////////////
1356
1357// 03/00 P. Dupieux : introduce a slighly more realistic
1358// geom. of the trigger readout planes with
1359// 2 Zpos per trigger plane (alternate
1360// between left and right of the trigger)
1361
1362// Parameters of the Trigger Chambers
1363
236fe2c5 1364// DP03-01 introduce dead zone of +/- 2 cm arround x=0 (as in TDR, fig3.27)
1365 const Float_t kDXZERO=2.;
a9e2aefa 1366 const Float_t kXMC1MIN=34.;
1367 const Float_t kXMC1MED=51.;
1368 const Float_t kXMC1MAX=272.;
1369 const Float_t kYMC1MIN=34.;
1370 const Float_t kYMC1MAX=51.;
1371 const Float_t kRMIN1=50.;
236fe2c5 1372// DP03-01 const Float_t kRMAX1=62.;
1373 const Float_t kRMAX1=64.;
a9e2aefa 1374 const Float_t kRMIN2=50.;
236fe2c5 1375// DP03-01 const Float_t kRMAX2=66.;
1376 const Float_t kRMAX2=68.;
a9e2aefa 1377
1378// zposition of the middle of the gas gap in mother vol
1379 const Float_t kZMCm=-3.6;
1380 const Float_t kZMCp=+3.6;
1381
1382
1383// TRIGGER STATION 1 - TRIGGER STATION 1 - TRIGGER STATION 1
1384
1385 // iChamber 1 and 2 for first and second chambers in the station
1386 // iChamber (first chamber) kept for other quanties than Z,
1387 // assumed to be the same in both chambers
1388 iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[10];
1389 iChamber2 =(AliMUONChamber*) (*fChambers)[11];
1390
1391 // 03/00
1392 // zpos1 and zpos2 are now the middle of the first and second
1393 // plane of station 1 :
1394 // zpos1=(16075+15995)/2=16035 mm, thick/2=40 mm
1395 // zpos2=(16225+16145)/2=16185 mm, thick/2=40 mm
1396 //
1397 // zpos1m=15999 mm , zpos1p=16071 mm (middles of gas gaps)
1398 // zpos2m=16149 mm , zpos2p=16221 mm (middles of gas gaps)
1399 // rem : the total thickness accounts for 1 mm of al on both
1400 // side of the RPCs (see zpos1 and zpos2), as previously
1401
1402 zpos1=iChamber1->Z();
1403 zpos2=iChamber2->Z();
1404
1405
1406// Mother volume definition
1407 tpar[0] = iChamber->RInner();
1408 tpar[1] = iChamber->ROuter();
1409 tpar[2] = 4.0;
b74f1c6a 1410 gMC->Gsvolu("SM11", "TUBE", idAir, tpar, 3);
1411 gMC->Gsvolu("SM12", "TUBE", idAir, tpar, 3);
a9e2aefa 1412
1413// Definition of the flange between the beam shielding and the RPC
1414 tpar[0]= kRMIN1;
1415 tpar[1]= kRMAX1;
1416 tpar[2]= 4.0;
1417
b74f1c6a 1418 gMC->Gsvolu("SF1A", "TUBE", idAlu1, tpar, 3); //Al
1419 gMC->Gspos("SF1A", 1, "SM11", 0., 0., 0., 0, "MANY");
1420 gMC->Gspos("SF1A", 2, "SM12", 0., 0., 0., 0, "MANY");
a9e2aefa 1421
1422
1423// FIRST PLANE OF STATION 1
1424
1425// ratios of zpos1m/zpos1p and inverse for first plane
1426 Float_t zmp=(zpos1-3.6)/(zpos1+3.6);
1427 Float_t zpm=1./zmp;
1428
1429
1430// Definition of prototype for chambers in the first plane
1431
1432 tpar[0]= 0.;
1433 tpar[1]= 0.;
1434 tpar[2]= 0.;
1435
b74f1c6a 1436 gMC->Gsvolu("SC1A", "BOX ", idAlu1, tpar, 0); //Al
1437 gMC->Gsvolu("SB1A", "BOX ", idtmed[1107], tpar, 0); //Bakelite
1438 gMC->Gsvolu("SG1A", "BOX ", idtmed[1106], tpar, 0); //Gas streamer
a9e2aefa 1439
1440// chamber type A
1441 tpar[0] = -1.;
1442 tpar[1] = -1.;
1443
236fe2c5 1444// DP03-01 const Float_t kXMC1A=kXMC1MED+(kXMC1MAX-kXMC1MED)/2.;
1445 const Float_t kXMC1A=kDXZERO+kXMC1MED+(kXMC1MAX-kXMC1MED)/2.;
a9e2aefa 1446 const Float_t kYMC1Am=0.;
1447 const Float_t kYMC1Ap=0.;
1448
1449 tpar[2] = 0.1;
b74f1c6a 1450 gMC->Gsposp("SG1A", 1, "SB1A", 0., 0., 0., 0, "ONLY",tpar,3);
a9e2aefa 1451 tpar[2] = 0.3;
b74f1c6a 1452 gMC->Gsposp("SB1A", 1, "SC1A", 0., 0., 0., 0, "ONLY",tpar,3);
a9e2aefa 1453
1454 tpar[2] = 0.4;
1455 tpar[0] = (kXMC1MAX-kXMC1MED)/2.;
1456 tpar[1] = kYMC1MIN;
1457
b74f1c6a 1458 gMC->Gsposp("SC1A", 1, "SM11",kXMC1A,kYMC1Am,kZMCm, 0, "ONLY", tpar, 3);
1459 gMC->Gsposp("SC1A", 2, "SM11",-kXMC1A,kYMC1Ap,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1460
1461// chamber type B
1462 Float_t tpar1save=tpar[1];
1463 Float_t y1msave=kYMC1Am;
1464 Float_t y1psave=kYMC1Ap;
1465
1466 tpar[0] = (kXMC1MAX-kXMC1MIN)/2.;
1467 tpar[1] = (kYMC1MAX-kYMC1MIN)/2.;
1468
236fe2c5 1469// DP03-01 const Float_t kXMC1B=kXMC1MIN+tpar[0];
1470 const Float_t kXMC1B=kDXZERO+kXMC1MIN+tpar[0];
a9e2aefa 1471 const Float_t kYMC1Bp=(y1msave+tpar1save)*zpm+tpar[1];
1472 const Float_t kYMC1Bm=(y1psave+tpar1save)*zmp+tpar[1];
1473
b74f1c6a 1474 gMC->Gsposp("SC1A", 3, "SM11",kXMC1B,kYMC1Bp,kZMCp, 0, "ONLY", tpar, 3);
1475 gMC->Gsposp("SC1A", 4, "SM11",-kXMC1B,kYMC1Bm,kZMCm, 0, "ONLY", tpar, 3);
1476 gMC->Gsposp("SC1A", 5, "SM11",kXMC1B,-kYMC1Bp,kZMCp, 0, "ONLY", tpar, 3);
1477 gMC->Gsposp("SC1A", 6, "SM11",-kXMC1B,-kYMC1Bm,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1478
1479// chamber type C (end of type B !!)
1480 tpar1save=tpar[1];
1481 y1msave=kYMC1Bm;
1482 y1psave=kYMC1Bp;
1483
1484 tpar[0] = kXMC1MAX/2;
1485 tpar[1] = kYMC1MAX/2;
1486
236fe2c5 1487
1488// DP03-01 const Float_t kXMC1C=tpar[0];
1489 const Float_t kXMC1C=kDXZERO+tpar[0];
a9e2aefa 1490// warning : same Z than type B
1491 const Float_t kYMC1Cp=(y1psave+tpar1save)*1.+tpar[1];
1492 const Float_t kYMC1Cm=(y1msave+tpar1save)*1.+tpar[1];
1493
b74f1c6a 1494 gMC->Gsposp("SC1A", 7, "SM11",kXMC1C,kYMC1Cp,kZMCp, 0, "ONLY", tpar, 3);
1495 gMC->Gsposp("SC1A", 8, "SM11",-kXMC1C,kYMC1Cm,kZMCm, 0, "ONLY", tpar, 3);
1496 gMC->Gsposp("SC1A", 9, "SM11",kXMC1C,-kYMC1Cp,kZMCp, 0, "ONLY", tpar, 3);
1497 gMC->Gsposp("SC1A", 10, "SM11",-kXMC1C,-kYMC1Cm,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1498
1499// chamber type D, E and F (same size)
1500 tpar1save=tpar[1];
1501 y1msave=kYMC1Cm;
1502 y1psave=kYMC1Cp;
1503
1504 tpar[0] = kXMC1MAX/2.;
1505 tpar[1] = kYMC1MIN;
1506
236fe2c5 1507// DP03-01 const Float_t kXMC1D=tpar[0];
1508 const Float_t kXMC1D=kDXZERO+tpar[0];
a9e2aefa 1509 const Float_t kYMC1Dp=(y1msave+tpar1save)*zpm+tpar[1];
1510 const Float_t kYMC1Dm=(y1psave+tpar1save)*zmp+tpar[1];
1511
b74f1c6a 1512 gMC->Gsposp("SC1A", 11, "SM11",kXMC1D,kYMC1Dm,kZMCm, 0, "ONLY", tpar, 3);
1513 gMC->Gsposp("SC1A", 12, "SM11",-kXMC1D,kYMC1Dp,kZMCp, 0, "ONLY", tpar, 3);
1514 gMC->Gsposp("SC1A", 13, "SM11",kXMC1D,-kYMC1Dm,kZMCm, 0, "ONLY", tpar, 3);
1515 gMC->Gsposp("SC1A", 14, "SM11",-kXMC1D,-kYMC1Dp,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1516
1517
1518 tpar1save=tpar[1];
1519 y1msave=kYMC1Dm;
1520 y1psave=kYMC1Dp;
1521 const Float_t kYMC1Ep=(y1msave+tpar1save)*zpm+tpar[1];
1522 const Float_t kYMC1Em=(y1psave+tpar1save)*zmp+tpar[1];
1523
b74f1c6a 1524 gMC->Gsposp("SC1A", 15, "SM11",kXMC1D,kYMC1Ep,kZMCp, 0, "ONLY", tpar, 3);
1525 gMC->Gsposp("SC1A", 16, "SM11",-kXMC1D,kYMC1Em,kZMCm, 0, "ONLY", tpar, 3);
1526 gMC->Gsposp("SC1A", 17, "SM11",kXMC1D,-kYMC1Ep,kZMCp, 0, "ONLY", tpar, 3);
1527 gMC->Gsposp("SC1A", 18, "SM11",-kXMC1D,-kYMC1Em,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1528
1529 tpar1save=tpar[1];
1530 y1msave=kYMC1Em;
1531 y1psave=kYMC1Ep;
1532 const Float_t kYMC1Fp=(y1msave+tpar1save)*zpm+tpar[1];
1533 const Float_t kYMC1Fm=(y1psave+tpar1save)*zmp+tpar[1];
1534
b74f1c6a 1535 gMC->Gsposp("SC1A", 19, "SM11",kXMC1D,kYMC1Fm,kZMCm, 0, "ONLY", tpar, 3);
1536 gMC->Gsposp("SC1A", 20, "SM11",-kXMC1D,kYMC1Fp,kZMCp, 0, "ONLY", tpar, 3);
1537 gMC->Gsposp("SC1A", 21, "SM11",kXMC1D,-kYMC1Fm,kZMCm, 0, "ONLY", tpar, 3);
1538 gMC->Gsposp("SC1A", 22, "SM11",-kXMC1D,-kYMC1Fp,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1539
1540// Positioning first plane in ALICE
b74f1c6a 1541 gMC->Gspos("SM11", 1, "ALIC", 0., 0., zpos1, 0, "ONLY");
a9e2aefa 1542
1543// End of geometry definition for the first plane of station 1
1544
1545
1546
1547// SECOND PLANE OF STATION 1 : proj ratio = zpos2/zpos1
1548
1549 const Float_t kZ12=zpos2/zpos1;
1550
1551// Definition of prototype for chambers in the second plane of station 1
1552
1553 tpar[0]= 0.;
1554 tpar[1]= 0.;
1555 tpar[2]= 0.;
1556
b74f1c6a 1557 gMC->Gsvolu("SC2A", "BOX ", idAlu1, tpar, 0); //Al
1558 gMC->Gsvolu("SB2A", "BOX ", idtmed[1107], tpar, 0); //Bakelite
1559 gMC->Gsvolu("SG2A", "BOX ", idtmed[1106], tpar, 0); //Gas streamer
a9e2aefa 1560
1561// chamber type A
1562 tpar[0] = -1.;
1563 tpar[1] = -1.;
1564
1565 const Float_t kXMC2A=kXMC1A*kZ12;
1566 const Float_t kYMC2Am=0.;
1567 const Float_t kYMC2Ap=0.;
1568
1569 tpar[2] = 0.1;
b74f1c6a 1570 gMC->Gsposp("SG2A", 1, "SB2A", 0., 0., 0., 0, "ONLY",tpar,3);
a9e2aefa 1571 tpar[2] = 0.3;
b74f1c6a 1572 gMC->Gsposp("SB2A", 1, "SC2A", 0., 0., 0., 0, "ONLY",tpar,3);
a9e2aefa 1573
1574 tpar[2] = 0.4;
1575 tpar[0] = ((kXMC1MAX-kXMC1MED)/2.)*kZ12;
1576 tpar[1] = kYMC1MIN*kZ12;
1577
b74f1c6a 1578 gMC->Gsposp("SC2A", 1, "SM12",kXMC2A,kYMC2Am,kZMCm, 0, "ONLY", tpar, 3);
1579 gMC->Gsposp("SC2A", 2, "SM12",-kXMC2A,kYMC2Ap,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1580
1581
1582// chamber type B
1583
1584 tpar[0] = ((kXMC1MAX-kXMC1MIN)/2.)*kZ12;
1585 tpar[1] = ((kYMC1MAX-kYMC1MIN)/2.)*kZ12;
1586
1587 const Float_t kXMC2B=kXMC1B*kZ12;
1588 const Float_t kYMC2Bp=kYMC1Bp*kZ12;
1589 const Float_t kYMC2Bm=kYMC1Bm*kZ12;
b74f1c6a 1590 gMC->Gsposp("SC2A", 3, "SM12",kXMC2B,kYMC2Bp,kZMCp, 0, "ONLY", tpar, 3);
1591 gMC->Gsposp("SC2A", 4, "SM12",-kXMC2B,kYMC2Bm,kZMCm, 0, "ONLY", tpar, 3);
1592 gMC->Gsposp("SC2A", 5, "SM12",kXMC2B,-kYMC2Bp,kZMCp, 0, "ONLY", tpar, 3);
1593 gMC->Gsposp("SC2A", 6, "SM12",-kXMC2B,-kYMC2Bm,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1594
1595
1596// chamber type C (end of type B !!)
1597
1598 tpar[0] = (kXMC1MAX/2)*kZ12;
1599 tpar[1] = (kYMC1MAX/2)*kZ12;
1600
1601 const Float_t kXMC2C=kXMC1C*kZ12;
1602 const Float_t kYMC2Cp=kYMC1Cp*kZ12;
1603 const Float_t kYMC2Cm=kYMC1Cm*kZ12;
b74f1c6a 1604 gMC->Gsposp("SC2A", 7, "SM12",kXMC2C,kYMC2Cp,kZMCp, 0, "ONLY", tpar, 3);
1605 gMC->Gsposp("SC2A", 8, "SM12",-kXMC2C,kYMC2Cm,kZMCm, 0, "ONLY", tpar, 3);
1606 gMC->Gsposp("SC2A", 9, "SM12",kXMC2C,-kYMC2Cp,kZMCp, 0, "ONLY", tpar, 3);
1607 gMC->Gsposp("SC2A", 10, "SM12",-kXMC2C,-kYMC2Cm,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1608
1609// chamber type D, E and F (same size)
1610
1611 tpar[0] = (kXMC1MAX/2.)*kZ12;
1612 tpar[1] = kYMC1MIN*kZ12;
1613
1614 const Float_t kXMC2D=kXMC1D*kZ12;
1615 const Float_t kYMC2Dp=kYMC1Dp*kZ12;
1616 const Float_t kYMC2Dm=kYMC1Dm*kZ12;
b74f1c6a 1617 gMC->Gsposp("SC2A", 11, "SM12",kXMC2D,kYMC2Dm,kZMCm, 0, "ONLY", tpar, 3);
1618 gMC->Gsposp("SC2A", 12, "SM12",-kXMC2D,kYMC2Dp,kZMCp, 0, "ONLY", tpar, 3);
1619 gMC->Gsposp("SC2A", 13, "SM12",kXMC2D,-kYMC2Dm,kZMCm, 0, "ONLY", tpar, 3);
1620 gMC->Gsposp("SC2A", 14, "SM12",-kXMC2D,-kYMC2Dp,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1621
1622 const Float_t kYMC2Ep=kYMC1Ep*kZ12;
1623 const Float_t kYMC2Em=kYMC1Em*kZ12;
b74f1c6a 1624 gMC->Gsposp("SC2A", 15, "SM12",kXMC2D,kYMC2Ep,kZMCp, 0, "ONLY", tpar, 3);
1625 gMC->Gsposp("SC2A", 16, "SM12",-kXMC2D,kYMC2Em,kZMCm, 0, "ONLY", tpar, 3);
1626 gMC->Gsposp("SC2A", 17, "SM12",kXMC2D,-kYMC2Ep,kZMCp, 0, "ONLY", tpar, 3);
1627 gMC->Gsposp("SC2A", 18, "SM12",-kXMC2D,-kYMC2Em,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1628
1629
1630 const Float_t kYMC2Fp=kYMC1Fp*kZ12;
1631 const Float_t kYMC2Fm=kYMC1Fm*kZ12;
b74f1c6a 1632 gMC->Gsposp("SC2A", 19, "SM12",kXMC2D,kYMC2Fm,kZMCm, 0, "ONLY", tpar, 3);
1633 gMC->Gsposp("SC2A", 20, "SM12",-kXMC2D,kYMC2Fp,kZMCp, 0, "ONLY", tpar, 3);
1634 gMC->Gsposp("SC2A", 21, "SM12",kXMC2D,-kYMC2Fm,kZMCm, 0, "ONLY", tpar, 3);
1635 gMC->Gsposp("SC2A", 22, "SM12",-kXMC2D,-kYMC2Fp,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1636
1637// Positioning second plane of station 1 in ALICE
1638
b74f1c6a 1639 gMC->Gspos("SM12", 1, "ALIC", 0., 0., zpos2, 0, "ONLY");
a9e2aefa 1640
1641// End of geometry definition for the second plane of station 1
1642
1643
1644
1645// TRIGGER STATION 2 - TRIGGER STATION 2 - TRIGGER STATION 2
1646
1647 // 03/00
1648 // zpos3 and zpos4 are now the middle of the first and second
1649 // plane of station 2 :
1650 // zpos3=(17075+16995)/2=17035 mm, thick/2=40 mm
1651 // zpos4=(17225+17145)/2=17185 mm, thick/2=40 mm
1652 //
1653 // zpos3m=16999 mm , zpos3p=17071 mm (middles of gas gaps)
1654 // zpos4m=17149 mm , zpos4p=17221 mm (middles of gas gaps)
1655 // rem : the total thickness accounts for 1 mm of al on both
1656 // side of the RPCs (see zpos3 and zpos4), as previously
1657 iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[12];
1658 iChamber2 =(AliMUONChamber*) (*fChambers)[13];
1659 Float_t zpos3=iChamber1->Z();
1660 Float_t zpos4=iChamber2->Z();
1661
1662
1663// Mother volume definition
1664 tpar[0] = iChamber->RInner();
1665 tpar[1] = iChamber->ROuter();
1666 tpar[2] = 4.0;
1667
b74f1c6a 1668 gMC->Gsvolu("SM21", "TUBE", idAir, tpar, 3);
1669 gMC->Gsvolu("SM22", "TUBE", idAir, tpar, 3);
a9e2aefa 1670
1671// Definition of the flange between the beam shielding and the RPC
1672// ???? interface shielding
1673
1674 tpar[0]= kRMIN2;
1675 tpar[1]= kRMAX2;
1676 tpar[2]= 4.0;
1677
b74f1c6a 1678 gMC->Gsvolu("SF2A", "TUBE", idAlu1, tpar, 3); //Al
1679 gMC->Gspos("SF2A", 1, "SM21", 0., 0., 0., 0, "MANY");
1680 gMC->Gspos("SF2A", 2, "SM22", 0., 0., 0., 0, "MANY");
a9e2aefa 1681
1682
1683
1684// FIRST PLANE OF STATION 2 : proj ratio = zpos3/zpos1
1685
1686 const Float_t kZ13=zpos3/zpos1;
1687
1688// Definition of prototype for chambers in the first plane of station 2
1689 tpar[0]= 0.;
1690 tpar[1]= 0.;
1691 tpar[2]= 0.;
1692
b74f1c6a 1693 gMC->Gsvolu("SC3A", "BOX ", idAlu1, tpar, 0); //Al
1694 gMC->Gsvolu("SB3A", "BOX ", idtmed[1107], tpar, 0); //Bakelite
1695 gMC->Gsvolu("SG3A", "BOX ", idtmed[1106], tpar, 0); //Gas streamer
a9e2aefa 1696
1697
1698// chamber type A
1699 tpar[0] = -1.;
1700 tpar[1] = -1.;
1701
1702 const Float_t kXMC3A=kXMC1A*kZ13;
1703 const Float_t kYMC3Am=0.;
1704 const Float_t kYMC3Ap=0.;
1705
1706 tpar[2] = 0.1;
b74f1c6a 1707 gMC->Gsposp("SG3A", 1, "SB3A", 0., 0., 0., 0, "ONLY",tpar,3);
a9e2aefa 1708 tpar[2] = 0.3;
b74f1c6a 1709 gMC->Gsposp("SB3A", 1, "SC3A", 0., 0., 0., 0, "ONLY",tpar,3);
a9e2aefa 1710
1711 tpar[2] = 0.4;
1712 tpar[0] = ((kXMC1MAX-kXMC1MED)/2.)*kZ13;
1713 tpar[1] = kYMC1MIN*kZ13;
b74f1c6a 1714 gMC->Gsposp("SC3A", 1, "SM21",kXMC3A,kYMC3Am,kZMCm, 0, "ONLY", tpar, 3);
1715 gMC->Gsposp("SC3A", 2, "SM21",-kXMC3A,kYMC3Ap,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1716
1717
1718// chamber type B
1719 tpar[0] = ((kXMC1MAX-kXMC1MIN)/2.)*kZ13;
1720 tpar[1] = ((kYMC1MAX-kYMC1MIN)/2.)*kZ13;
1721
1722 const Float_t kXMC3B=kXMC1B*kZ13;
1723 const Float_t kYMC3Bp=kYMC1Bp*kZ13;
1724 const Float_t kYMC3Bm=kYMC1Bm*kZ13;
b74f1c6a 1725 gMC->Gsposp("SC3A", 3, "SM21",kXMC3B,kYMC3Bp,kZMCp, 0, "ONLY", tpar, 3);
1726 gMC->Gsposp("SC3A", 4, "SM21",-kXMC3B,kYMC3Bm,kZMCm, 0, "ONLY", tpar, 3);
1727 gMC->Gsposp("SC3A", 5, "SM21",kXMC3B,-kYMC3Bp,kZMCp, 0, "ONLY", tpar, 3);
1728 gMC->Gsposp("SC3A", 6, "SM21",-kXMC3B,-kYMC3Bm,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1729
1730
1731// chamber type C (end of type B !!)
1732 tpar[0] = (kXMC1MAX/2)*kZ13;
1733 tpar[1] = (kYMC1MAX/2)*kZ13;
1734
1735 const Float_t kXMC3C=kXMC1C*kZ13;
1736 const Float_t kYMC3Cp=kYMC1Cp*kZ13;
1737 const Float_t kYMC3Cm=kYMC1Cm*kZ13;
b74f1c6a 1738 gMC->Gsposp("SC3A", 7, "SM21",kXMC3C,kYMC3Cp,kZMCp, 0, "ONLY", tpar, 3);
1739 gMC->Gsposp("SC3A", 8, "SM21",-kXMC3C,kYMC3Cm,kZMCm, 0, "ONLY", tpar, 3);
1740 gMC->Gsposp("SC3A", 9, "SM21",kXMC3C,-kYMC3Cp,kZMCp, 0, "ONLY", tpar, 3);
1741 gMC->Gsposp("SC3A", 10, "SM21",-kXMC3C,-kYMC3Cm,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1742
1743
1744// chamber type D, E and F (same size)
1745
1746 tpar[0] = (kXMC1MAX/2.)*kZ13;
1747 tpar[1] = kYMC1MIN*kZ13;
1748
1749 const Float_t kXMC3D=kXMC1D*kZ13;
1750 const Float_t kYMC3Dp=kYMC1Dp*kZ13;
1751 const Float_t kYMC3Dm=kYMC1Dm*kZ13;
b74f1c6a 1752 gMC->Gsposp("SC3A", 11, "SM21",kXMC3D,kYMC3Dm,kZMCm, 0, "ONLY", tpar, 3);
1753 gMC->Gsposp("SC3A", 12, "SM21",-kXMC3D,kYMC3Dp,kZMCp, 0, "ONLY", tpar, 3);
1754 gMC->Gsposp("SC3A", 13, "SM21",kXMC3D,-kYMC3Dm,kZMCm, 0, "ONLY", tpar, 3);
1755 gMC->Gsposp("SC3A", 14, "SM21",-kXMC3D,-kYMC3Dp,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1756
1757 const Float_t kYMC3Ep=kYMC1Ep*kZ13;
1758 const Float_t kYMC3Em=kYMC1Em*kZ13;
b74f1c6a 1759 gMC->Gsposp("SC3A", 15, "SM21",kXMC3D,kYMC3Ep,kZMCp, 0, "ONLY", tpar, 3);
1760 gMC->Gsposp("SC3A", 16, "SM21",-kXMC3D,kYMC3Em,kZMCm, 0, "ONLY", tpar, 3);
1761 gMC->Gsposp("SC3A", 17, "SM21",kXMC3D,-kYMC3Ep,kZMCp, 0, "ONLY", tpar, 3);
1762 gMC->Gsposp("SC3A", 18, "SM21",-kXMC3D,-kYMC3Em,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1763
1764 const Float_t kYMC3Fp=kYMC1Fp*kZ13;
1765 const Float_t kYMC3Fm=kYMC1Fm*kZ13;
b74f1c6a 1766 gMC->Gsposp("SC3A", 19, "SM21",kXMC3D,kYMC3Fm,kZMCm, 0, "ONLY", tpar, 3);
1767 gMC->Gsposp("SC3A", 20, "SM21",-kXMC3D,kYMC3Fp,kZMCp, 0, "ONLY", tpar, 3);
1768 gMC->Gsposp("SC3A", 21, "SM21",kXMC3D,-kYMC3Fm,kZMCm, 0, "ONLY", tpar, 3);
1769 gMC->Gsposp("SC3A", 22, "SM21",-kXMC3D,-kYMC3Fp,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1770
1771
1772// Positioning first plane of station 2 in ALICE
1773
b74f1c6a 1774 gMC->Gspos("SM21", 1, "ALIC", 0., 0., zpos3, 0, "ONLY");
a9e2aefa 1775
1776// End of geometry definition for the first plane of station 2
1777
1778
1779
1780
1781// SECOND PLANE OF STATION 2 : proj ratio = zpos4/zpos1
1782
1783 const Float_t kZ14=zpos4/zpos1;
1784
1785// Definition of prototype for chambers in the second plane of station 2
1786
1787 tpar[0]= 0.;
1788 tpar[1]= 0.;
1789 tpar[2]= 0.;
1790
b74f1c6a 1791 gMC->Gsvolu("SC4A", "BOX ", idAlu1, tpar, 0); //Al
1792 gMC->Gsvolu("SB4A", "BOX ", idtmed[1107], tpar, 0); //Bakelite
1793 gMC->Gsvolu("SG4A", "BOX ", idtmed[1106], tpar, 0); //Gas streamer
a9e2aefa 1794
1795// chamber type A
1796 tpar[0] = -1.;
1797 tpar[1] = -1.;
1798
1799 const Float_t kXMC4A=kXMC1A*kZ14;
1800 const Float_t kYMC4Am=0.;
1801 const Float_t kYMC4Ap=0.;
1802
1803 tpar[2] = 0.1;
b74f1c6a 1804 gMC->Gsposp("SG4A", 1, "SB4A", 0., 0., 0., 0, "ONLY",tpar,3);
a9e2aefa 1805 tpar[2] = 0.3;
b74f1c6a 1806 gMC->Gsposp("SB4A", 1, "SC4A", 0., 0., 0., 0, "ONLY",tpar,3);
a9e2aefa 1807
1808 tpar[2] = 0.4;
1809 tpar[0] = ((kXMC1MAX-kXMC1MED)/2.)*kZ14;
1810 tpar[1] = kYMC1MIN*kZ14;
b74f1c6a 1811 gMC->Gsposp("SC4A", 1, "SM22",kXMC4A,kYMC4Am,kZMCm, 0, "ONLY", tpar, 3);
1812 gMC->Gsposp("SC4A", 2, "SM22",-kXMC4A,kYMC4Ap,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1813
1814
1815// chamber type B
1816 tpar[0] = ((kXMC1MAX-kXMC1MIN)/2.)*kZ14;
1817 tpar[1] = ((kYMC1MAX-kYMC1MIN)/2.)*kZ14;
1818
1819 const Float_t kXMC4B=kXMC1B*kZ14;
1820 const Float_t kYMC4Bp=kYMC1Bp*kZ14;
1821 const Float_t kYMC4Bm=kYMC1Bm*kZ14;
b74f1c6a 1822 gMC->Gsposp("SC4A", 3, "SM22",kXMC4B,kYMC4Bp,kZMCp, 0, "ONLY", tpar, 3);
1823 gMC->Gsposp("SC4A", 4, "SM22",-kXMC4B,kYMC4Bm,kZMCm, 0, "ONLY", tpar, 3);
1824 gMC->Gsposp("SC4A", 5, "SM22",kXMC4B,-kYMC4Bp,kZMCp, 0, "ONLY", tpar, 3);
1825 gMC->Gsposp("SC4A", 6, "SM22",-kXMC4B,-kYMC4Bm,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1826
1827
1828// chamber type C (end of type B !!)
1829 tpar[0] =(kXMC1MAX/2)*kZ14;
1830 tpar[1] = (kYMC1MAX/2)*kZ14;
1831
1832 const Float_t kXMC4C=kXMC1C*kZ14;
1833 const Float_t kYMC4Cp=kYMC1Cp*kZ14;
1834 const Float_t kYMC4Cm=kYMC1Cm*kZ14;
b74f1c6a 1835 gMC->Gsposp("SC4A", 7, "SM22",kXMC4C,kYMC4Cp,kZMCp, 0, "ONLY", tpar, 3);
1836 gMC->Gsposp("SC4A", 8, "SM22",-kXMC4C,kYMC4Cm,kZMCm, 0, "ONLY", tpar, 3);
1837 gMC->Gsposp("SC4A", 9, "SM22",kXMC4C,-kYMC4Cp,kZMCp, 0, "ONLY", tpar, 3);
1838 gMC->Gsposp("SC4A", 10, "SM22",-kXMC4C,-kYMC4Cm,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1839
1840
1841// chamber type D, E and F (same size)
1842 tpar[0] = (kXMC1MAX/2.)*kZ14;
1843 tpar[1] = kYMC1MIN*kZ14;
1844
1845 const Float_t kXMC4D=kXMC1D*kZ14;
1846 const Float_t kYMC4Dp=kYMC1Dp*kZ14;
1847 const Float_t kYMC4Dm=kYMC1Dm*kZ14;
b74f1c6a 1848 gMC->Gsposp("SC4A", 11, "SM22",kXMC4D,kYMC4Dm,kZMCm, 0, "ONLY", tpar, 3);
1849 gMC->Gsposp("SC4A", 12, "SM22",-kXMC4D,kYMC4Dp,kZMCp, 0, "ONLY", tpar, 3);
1850 gMC->Gsposp("SC4A", 13, "SM22",kXMC4D,-kYMC4Dm,kZMCm, 0, "ONLY", tpar, 3);
1851 gMC->Gsposp("SC4A", 14, "SM22",-kXMC4D,-kYMC4Dp,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1852
1853 const Float_t kYMC4Ep=kYMC1Ep*kZ14;
1854 const Float_t kYMC4Em=kYMC1Em*kZ14;
b74f1c6a 1855 gMC->Gsposp("SC4A", 15, "SM22",kXMC4D,kYMC4Ep,kZMCp, 0, "ONLY", tpar, 3);
1856 gMC->Gsposp("SC4A", 16, "SM22",-kXMC4D,kYMC4Em,kZMCm, 0, "ONLY", tpar, 3);
1857 gMC->Gsposp("SC4A", 17, "SM22",kXMC4D,-kYMC4Ep,kZMCp, 0, "ONLY", tpar, 3);
1858 gMC->Gsposp("SC4A", 18, "SM22",-kXMC4D,-kYMC4Em,kZMCm, 0, "ONLY", tpar, 3);
a9e2aefa 1859
1860 const Float_t kYMC4Fp=kYMC1Fp*kZ14;
1861 const Float_t kYMC4Fm=kYMC1Fm*kZ14;
b74f1c6a 1862 gMC->Gsposp("SC4A", 19, "SM22",kXMC4D,kYMC4Fm,kZMCm, 0, "ONLY", tpar, 3);
1863 gMC->Gsposp("SC4A", 20, "SM22",-kXMC4D,kYMC4Fp,kZMCp, 0, "ONLY", tpar, 3);
1864 gMC->Gsposp("SC4A", 21, "SM22",kXMC4D,-kYMC4Fm,kZMCm, 0, "ONLY", tpar, 3);
1865 gMC->Gsposp("SC4A", 22, "SM22",-kXMC4D,-kYMC4Fp,kZMCp, 0, "ONLY", tpar, 3);
a9e2aefa 1866
1867
1868// Positioning second plane of station 2 in ALICE
1869
b74f1c6a 1870 gMC->Gspos("SM22", 1, "ALIC", 0., 0., zpos4, 0, "ONLY");
a9e2aefa 1871
1872// End of geometry definition for the second plane of station 2
1873
1874// End of trigger geometry definition
1875
1876}
1877
1878
1879
1880//___________________________________________
1881void AliMUONv1::CreateMaterials()
1882{
1883 // *** DEFINITION OF AVAILABLE MUON MATERIALS ***
1884 //
b64652f5 1885 // Ar-CO2 gas (80%+20%)
a9e2aefa 1886 Float_t ag1[3] = { 39.95,12.01,16. };
1887 Float_t zg1[3] = { 18.,6.,8. };
1888 Float_t wg1[3] = { .8,.0667,.13333 };
1889 Float_t dg1 = .001821;
1890 //
1891 // Ar-buthane-freon gas -- trigger chambers
1892 Float_t atr1[4] = { 39.95,12.01,1.01,19. };
1893 Float_t ztr1[4] = { 18.,6.,1.,9. };
1894 Float_t wtr1[4] = { .56,.1262857,.2857143,.028 };
1895 Float_t dtr1 = .002599;
1896 //
1897 // Ar-CO2 gas
1898 Float_t agas[3] = { 39.95,12.01,16. };
1899 Float_t zgas[3] = { 18.,6.,8. };
1900 Float_t wgas[3] = { .74,.086684,.173316 };
1901 Float_t dgas = .0018327;
1902 //
1903 // Ar-Isobutane gas (80%+20%) -- tracking
1904 Float_t ag[3] = { 39.95,12.01,1.01 };
1905 Float_t zg[3] = { 18.,6.,1. };
1906 Float_t wg[3] = { .8,.057,.143 };
1907 Float_t dg = .0019596;
1908 //
1909 // Ar-Isobutane-Forane-SF6 gas (49%+7%+40%+4%) -- trigger
1910 Float_t atrig[5] = { 39.95,12.01,1.01,19.,32.066 };
1911 Float_t ztrig[5] = { 18.,6.,1.,9.,16. };
1912 Float_t wtrig[5] = { .49,1.08,1.5,1.84,0.04 };
1913 Float_t dtrig = .0031463;
1914 //
1915 // bakelite
1916
1917 Float_t abak[3] = {12.01 , 1.01 , 16.};
1918 Float_t zbak[3] = {6. , 1. , 8.};
1919 Float_t wbak[3] = {6. , 6. , 1.};
1920 Float_t dbak = 1.4;
1921
1922 Float_t epsil, stmin, deemax, tmaxfd, stemax;
1923
1924 Int_t iSXFLD = gAlice->Field()->Integ();
1925 Float_t sXMGMX = gAlice->Field()->Max();
1926 //
1927 // --- Define the various materials for GEANT ---
1928 AliMaterial(9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
1929 AliMaterial(10, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
1930 AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
1931 AliMixture(19, "Bakelite$", abak, zbak, dbak, -3, wbak);
1932 AliMixture(20, "ArC4H10 GAS$", ag, zg, dg, 3, wg);
1933 AliMixture(21, "TRIG GAS$", atrig, ztrig, dtrig, -5, wtrig);
1934 AliMixture(22, "ArCO2 80%$", ag1, zg1, dg1, 3, wg1);
1935 AliMixture(23, "Ar-freon $", atr1, ztr1, dtr1, 4, wtr1);
1936 AliMixture(24, "ArCO2 GAS$", agas, zgas, dgas, 3, wgas);
1e8fff9c 1937 // materials for slat:
1938 // Sensitive area: gas (already defined)
1939 // PCB: copper
1940 // insulating material and frame: vetronite
1941 // walls: carbon, rohacell, carbon
1942 Float_t aglass[5]={12.01, 28.09, 16., 10.8, 23.};
1943 Float_t zglass[5]={ 6., 14., 8., 5., 11.};
1944 Float_t wglass[5]={ 0.5, 0.105, 0.355, 0.03, 0.01};
1945 Float_t dglass=1.74;
1946
1947 // rohacell: C9 H13 N1 O2
1948 Float_t arohac[4] = {12.01, 1.01, 14.010, 16.};
1949 Float_t zrohac[4] = { 6., 1., 7., 8.};
1950 Float_t wrohac[4] = { 9., 13., 1., 2.};
1951 Float_t drohac = 0.03;
1952
1953 AliMaterial(31, "COPPER$", 63.54, 29., 8.96, 1.4, 0.);
1954 AliMixture(32, "Vetronite$",aglass, zglass, dglass, 5, wglass);
1955 AliMaterial(33, "Carbon$", 12.01, 6., 2.265, 18.8, 49.9);
1956 AliMixture(34, "Rohacell$", arohac, zrohac, drohac, -4, wrohac);
1957
a9e2aefa 1958
1959 epsil = .001; // Tracking precision,
1960 stemax = -1.; // Maximum displacement for multiple scat
1961 tmaxfd = -20.; // Maximum angle due to field deflection
1962 deemax = -.3; // Maximum fractional energy loss, DLS
1963 stmin = -.8;
1964 //
1965 // Air
1966 AliMedium(1, "AIR_CH_US ", 15, 1, iSXFLD, sXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
1967 //
1968 // Aluminum
1969
1970 AliMedium(4, "ALU_CH_US ", 9, 0, iSXFLD, sXMGMX, tmaxfd, fMaxStepAlu,
1971 fMaxDestepAlu, epsil, stmin);
1972 AliMedium(5, "ALU_CH_US ", 10, 0, iSXFLD, sXMGMX, tmaxfd, fMaxStepAlu,
1973 fMaxDestepAlu, epsil, stmin);
1974 //
1975 // Ar-isoC4H10 gas
1976
1977 AliMedium(6, "AR_CH_US ", 20, 1, iSXFLD, sXMGMX, tmaxfd, fMaxStepGas,
1978 fMaxDestepGas, epsil, stmin);
1979//
1980 // Ar-Isobuthane-Forane-SF6 gas
1981
1982 AliMedium(7, "GAS_CH_TRIGGER ", 21, 1, iSXFLD, sXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
1983
1984 AliMedium(8, "BAKE_CH_TRIGGER ", 19, 0, iSXFLD, sXMGMX, tmaxfd, fMaxStepAlu,
1985 fMaxDestepAlu, epsil, stmin);
1986
1987 AliMedium(9, "ARG_CO2 ", 22, 1, iSXFLD, sXMGMX, tmaxfd, fMaxStepGas,
1988 fMaxDestepAlu, epsil, stmin);
1e8fff9c 1989 // tracking media for slats: check the parameters!!
1990 AliMedium(11, "PCB_COPPER ", 31, 0, iSXFLD, sXMGMX, tmaxfd,
1991 fMaxStepAlu, fMaxDestepAlu, epsil, stmin);
1992 AliMedium(12, "VETRONITE ", 32, 0, iSXFLD, sXMGMX, tmaxfd,
1993 fMaxStepAlu, fMaxDestepAlu, epsil, stmin);
1994 AliMedium(13, "CARBON ", 33, 0, iSXFLD, sXMGMX, tmaxfd,
1995 fMaxStepAlu, fMaxDestepAlu, epsil, stmin);
1996 AliMedium(14, "Rohacell ", 34, 0, iSXFLD, sXMGMX, tmaxfd,
1997 fMaxStepAlu, fMaxDestepAlu, epsil, stmin);
a9e2aefa 1998}
1999
2000//___________________________________________
2001
2002void AliMUONv1::Init()
2003{
2004 //
2005 // Initialize Tracking Chambers
2006 //
2007
9e1a0ddb 2008 if(fDebug) printf("\n%s: Start Init for version 1 - CPC chamber type\n\n",ClassName());
e17592e9 2009 Int_t i;
f665c1ea 2010 for (i=0; i<AliMUONConstants::NCh(); i++) {
a9e2aefa 2011 ( (AliMUONChamber*) (*fChambers)[i])->Init();
2012 }
2013
2014 //
2015 // Set the chamber (sensitive region) GEANT identifier
2016 AliMC* gMC = AliMC::GetMC();
b74f1c6a 2017 ((AliMUONChamber*)(*fChambers)[0])->SetGid(gMC->VolId("S01G"));
2018 ((AliMUONChamber*)(*fChambers)[1])->SetGid(gMC->VolId("S02G"));
b17c0c87 2019
b74f1c6a 2020 ((AliMUONChamber*)(*fChambers)[2])->SetGid(gMC->VolId("S03G"));
2021 ((AliMUONChamber*)(*fChambers)[3])->SetGid(gMC->VolId("S04G"));
b17c0c87 2022
1e8fff9c 2023 ((AliMUONChamber*)(*fChambers)[4])->SetGid(gMC->VolId("S05G"));
2024 ((AliMUONChamber*)(*fChambers)[5])->SetGid(gMC->VolId("S06G"));
b17c0c87 2025
1e8fff9c 2026 ((AliMUONChamber*)(*fChambers)[6])->SetGid(gMC->VolId("S07G"));
2027 ((AliMUONChamber*)(*fChambers)[7])->SetGid(gMC->VolId("S08G"));
b17c0c87 2028
1e8fff9c 2029 ((AliMUONChamber*)(*fChambers)[8])->SetGid(gMC->VolId("S09G"));
2030 ((AliMUONChamber*)(*fChambers)[9])->SetGid(gMC->VolId("S10G"));
b17c0c87 2031
b74f1c6a 2032 ((AliMUONChamber*)(*fChambers)[10])->SetGid(gMC->VolId("SG1A"));
2033 ((AliMUONChamber*)(*fChambers)[11])->SetGid(gMC->VolId("SG2A"));
2034 ((AliMUONChamber*)(*fChambers)[12])->SetGid(gMC->VolId("SG3A"));
2035 ((AliMUONChamber*)(*fChambers)[13])->SetGid(gMC->VolId("SG4A"));
a9e2aefa 2036
9e1a0ddb 2037 if(fDebug) printf("\n%s: Finished Init for version 1 - CPC chamber type\n",ClassName());
a9e2aefa 2038
2039 //cp
9e1a0ddb 2040 if(fDebug) printf("\n%s: Start Init for Trigger Circuits\n",ClassName());
f665c1ea 2041 for (i=0; i<AliMUONConstants::NTriggerCircuit(); i++) {
a9e2aefa 2042 ( (AliMUONTriggerCircuit*) (*fTriggerCircuits)[i])->Init(i);
2043 }
9e1a0ddb 2044 if(fDebug) printf("%s: Finished Init for Trigger Circuits\n",ClassName());
a9e2aefa 2045 //cp
2046
2047}
2048
2049//___________________________________________
2050void AliMUONv1::StepManager()
2051{
2052 Int_t copy, id;
2053 static Int_t idvol;
2054 static Int_t vol[2];
2055 Int_t ipart;
2056 TLorentzVector pos;
2057 TLorentzVector mom;
2058 Float_t theta,phi;
2059 Float_t destep, step;
681d067b 2060
1e8fff9c 2061 static Float_t eloss, eloss2, xhit, yhit, zhit, tof, tlength;
2eb55fab 2062 const Float_t kBig = 1.e10;
a9e2aefa 2063 static Float_t hits[15];
2064
2065 TClonesArray &lhits = *fHits;
2066
2067 //
a9e2aefa 2068 //
2069 // Only charged tracks
2070 if( !(gMC->TrackCharge()) ) return;
2071 //
2072 // Only gas gap inside chamber
2073 // Tag chambers and record hits when track enters
2074 idvol=-1;
2075 id=gMC->CurrentVolID(copy);
2076
2eb55fab 2077 for (Int_t i = 1; i <= AliMUONConstants::NCh(); i++) {
a9e2aefa 2078 if(id==((AliMUONChamber*)(*fChambers)[i-1])->GetGid()){
2eb55fab 2079 vol[0] = i;
2080 idvol = i-1;
a9e2aefa 2081 }
2082 }
2083 if (idvol == -1) return;
2084 //
2085 // Get current particle id (ipart), track position (pos) and momentum (mom)
2086 gMC->TrackPosition(pos);
2087 gMC->TrackMomentum(mom);
2088
2089 ipart = gMC->TrackPid();
a9e2aefa 2090
2091 //
2092 // momentum loss and steplength in last step
2093 destep = gMC->Edep();
2094 step = gMC->TrackStep();
2095
2096 //
2097 // record hits when track enters ...
2098 if( gMC->IsTrackEntering()) {
2099 gMC->SetMaxStep(fMaxStepGas);
2100 Double_t tc = mom[0]*mom[0]+mom[1]*mom[1];
2101 Double_t rt = TMath::Sqrt(tc);
2102 Double_t pmom = TMath::Sqrt(tc+mom[2]*mom[2]);
2eb55fab 2103 Double_t tx = mom[0]/pmom;
2104 Double_t ty = mom[1]/pmom;
2105 Double_t tz = mom[2]/pmom;
2106 Double_t s = ((AliMUONChamber*)(*fChambers)[idvol])
a9e2aefa 2107 ->ResponseModel()
2108 ->Pitch()/tz;
2109 theta = Float_t(TMath::ATan2(rt,Double_t(mom[2])))*kRaddeg;
2110 phi = Float_t(TMath::ATan2(Double_t(mom[1]),Double_t(mom[0])))*kRaddeg;
2111 hits[0] = Float_t(ipart); // Geant3 particle type
2eb55fab 2112 hits[1] = pos[0]+s*tx; // X-position for hit
2113 hits[2] = pos[1]+s*ty; // Y-position for hit
2114 hits[3] = pos[2]+s*tz; // Z-position for hit
a9e2aefa 2115 hits[4] = theta; // theta angle of incidence
2116 hits[5] = phi; // phi angle of incidence
2eb55fab 2117 hits[8] = (Float_t) fNPadHits; // first padhit
a9e2aefa 2118 hits[9] = -1; // last pad hit
2eb55fab 2119 hits[10] = mom[3]; // hit momentum P
2120 hits[11] = mom[0]; // Px
2121 hits[12] = mom[1]; // Py
2122 hits[13] = mom[2]; // Pz
a9e2aefa 2123 tof=gMC->TrackTime();
2eb55fab 2124 hits[14] = tof; // Time of flight
2125 tlength = 0;
2126 eloss = 0;
2127 eloss2 = 0;
2128 xhit = pos[0];
2129 yhit = pos[1];
2130 zhit = pos[2];
681d067b 2131 Chamber(idvol).ChargeCorrelationInit();
a9e2aefa 2132 // Only if not trigger chamber
1e8fff9c 2133
2134
2135
2136
2eb55fab 2137 if(idvol < AliMUONConstants::NTrackingCh()) {
a9e2aefa 2138 //
2139 // Initialize hit position (cursor) in the segmentation model
2140 ((AliMUONChamber*) (*fChambers)[idvol])
2141 ->SigGenInit(pos[0], pos[1], pos[2]);
2142 } else {
2143 //geant3->Gpcxyz();
2144 //printf("In the Trigger Chamber #%d\n",idvol-9);
2145 }
2146 }
2147 eloss2+=destep;
2148
2149 //
2150 // Calculate the charge induced on a pad (disintegration) in case
2151 //
2152 // Mip left chamber ...
2153 if( gMC->IsTrackExiting() || gMC->IsTrackStop() || gMC->IsTrackDisappeared()){
2154 gMC->SetMaxStep(kBig);
2155 eloss += destep;
2156 tlength += step;
2157
802a864d 2158 Float_t x0,y0,z0;
2159 Float_t localPos[3];
2160 Float_t globalPos[3] = {pos[0], pos[1], pos[2]};
802a864d 2161 gMC->Gmtod(globalPos,localPos,1);
2162
2eb55fab 2163 if(idvol < AliMUONConstants::NTrackingCh()) {
a9e2aefa 2164// tracking chambers
2165 x0 = 0.5*(xhit+pos[0]);
2166 y0 = 0.5*(yhit+pos[1]);
1e8fff9c 2167 z0 = 0.5*(zhit+pos[2]);
a9e2aefa 2168 } else {
2169// trigger chambers
2eb55fab 2170 x0 = xhit;
2171 y0 = yhit;
2172 z0 = 0.;
a9e2aefa 2173 }
2174
1e8fff9c 2175
802a864d 2176 if (eloss >0) MakePadHits(x0,y0,z0,eloss,tof,idvol);
a9e2aefa 2177
2178
2eb55fab 2179 hits[6] = tlength; // track length
2180 hits[7] = eloss2; // de/dx energy loss
2181
a9e2aefa 2182 if (fNPadHits > (Int_t)hits[8]) {
2eb55fab 2183 hits[8] = hits[8]+1;
2184 hits[9] = (Float_t) fNPadHits;
a9e2aefa 2185 }
2eb55fab 2186//
2187// new hit
2188
a9e2aefa 2189 new(lhits[fNhits++])
2eb55fab 2190 AliMUONHit(fIshunt, gAlice->CurrentTrack(), vol,hits);
a9e2aefa 2191 eloss = 0;
2192 //
2193 // Check additional signal generation conditions
2194 // defined by the segmentation
a75f073c 2195 // model (boundary crossing conditions)
2196 // only for tracking chambers
a9e2aefa 2197 } else if
a75f073c 2198 ((idvol < AliMUONConstants::NTrackingCh()) &&
2199 ((AliMUONChamber*) (*fChambers)[idvol])->SigGenCond(pos[0], pos[1], pos[2]))
a9e2aefa 2200 {
2201 ((AliMUONChamber*) (*fChambers)[idvol])
2202 ->SigGenInit(pos[0], pos[1], pos[2]);
802a864d 2203
2204 Float_t localPos[3];
2205 Float_t globalPos[3] = {pos[0], pos[1], pos[2]};
2206 gMC->Gmtod(globalPos,localPos,1);
2207
e0f71fb7 2208 eloss += destep;
802a864d 2209
a75f073c 2210 if (eloss > 0 && idvol < AliMUONConstants::NTrackingCh())
1e8fff9c 2211 MakePadHits(0.5*(xhit+pos[0]),0.5*(yhit+pos[1]),pos[2],eloss,tof,idvol);
a9e2aefa 2212 xhit = pos[0];
2213 yhit = pos[1];
e0f71fb7 2214 zhit = pos[2];
2215 eloss = 0;
a9e2aefa 2216 tlength += step ;
2217 //
2218 // nothing special happened, add up energy loss
2219 } else {
2220 eloss += destep;
2221 tlength += step ;
2222 }
2223}
2224
2225