Adding an option to disabling status map usage (for debug only)
[u/mrichter/AliRoot.git] / MUON / MUONGenerateBusPatch.C
CommitLineData
36903978 1/**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3 * *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
6 * *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
15
16
17void MUONGenerateBusPatch()
18{
19 // Generates buspatch id and DDL id for given detection element id
0a69c1eb 20 // station 1 & 2 assuming 24 buspatches per quadrant
36903978 21 // station345, reading from DetElemIdToSlatType.dat file and calculates
22 // the number of bus patches per slat (and also number of Translator and Bridge Boards).
23 // Generates an output file DetElemIdToBusPatch.dat.out, preserve from overwriting
24 // (Ch. Finck, July 05)
42c7b335 25 // (Nov. 05, added DDL)
26 // (June 06, correction for St123)
36903978 27
6e96542a 28
36903978 29 TString dirPath2 = gSystem->Getenv("ALICE_ROOT");
30 dirPath2 += "/MUON/mapping/data/";
31
32 TString dirPath1 = dirPath2 + "station345/";
33
34 TString infile = dirPath1 + "DetElemIdToSlatType.dat";
35 TString outfile = dirPath2 + "DetElemIdToBusPatch.dat.out";
36
37 ifstream in(infile, ios::in);
38 ofstream out(outfile, ios::out);
39 char line[80];
40 char nameSlat[82];
41 Int_t idDE;
42 Int_t i;
43 Int_t cursor = 0;
44 Int_t begin[800];
45 Int_t end[800];
46 Int_t nbBusPatch;
47 Int_t listDE[800];
48 Int_t nbTB = 0;
49 Int_t nbBB = 0;
50 Int_t idSt12[] = {100, 101, 102, 103,
51 200, 201, 202, 203,
52 300, 301, 302, 303,
53 400, 401, 402, 403};
54
42c7b335 55 Int_t idSt3swp1 = 5; // 1/4 chamber for DDL on horizontal
56 Int_t idSt3swp2 = 9; // 1/4 chamber for DDL on horizontal
57 Int_t idSt3swp3 = 14; // 1/4 chamber for DDL on horizontal
58
36903978 59 Int_t idSt45swp1 = 7; // half chamber for DDL in vertical cutting twice the official numbering
60 Int_t idSt45swp2 = 20;
61
62 Int_t iDDL = 0;
63 // station 1 & 2
0a69c1eb 64 nbBusPatch = 24;
36903978 65 cout << "#DE BusPatch DDL SlatName" << endl;
66 out << "#DE BusPatch DDL " << endl;
67
68 for (Int_t j = 0; j < 16; j++) {
69
70 idDE = idSt12[j];
71 if (idDE % 100 == 0) {
42c7b335 72 iDDL++;
6e96542a 73 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1);
36903978 74 cout << "# Chamber " << idDE/100 << endl;
75 out << "# Chamber " << idDE/100 << endl;
76 }
42c7b335 77 if (idDE % 100 == 1) {
78 iDDL++;
6e96542a 79 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1);
42c7b335 80 }
81 if (idDE % 100 == 3) {
82 iDDL--;
6e96542a 83 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1) + nbBusPatch;
42c7b335 84 }
36903978 85 end[cursor] = begin[cursor] + nbBusPatch - 1;
86 begin[++cursor] = end[cursor] + 1;
87
42c7b335 88 cout << idDE << " " << begin[cursor-1]<<"-"<<end[cursor-1] <<" " << iDDL-1 << endl;
89 out << idDE << " " << begin[cursor-1]<<"-"<<end[cursor-1] <<" " << iDDL-1 <<endl;
90 if (idDE % 100 == 3) iDDL++;
91
36903978 92 }
93
94 // station 345
95 nbBusPatch = 0;
42c7b335 96 Int_t nbBusSt3Tot1 = 0;
97 Int_t nbBusSt3Tot2 = 0;
98 Int_t nbBusSt3Tot3 = 0;
99 Int_t nbBusSt3Tot4 = 0;
100
101 Int_t nbBusSt3Swap1 = 0;
102 Int_t nbBusSt3Swap2 = 0;
103 Int_t nbBusSt3Swap3 = 0;
104 Int_t nbBusSt3Swap4 = 0;
105
106 Int_t iDDLSt3Swap1 = 0;
107 Int_t iDDLSt3Swap2 = 0;
108 Int_t iDDLSt3Swap3 = 0;
109 Int_t iDDLSt3Swap4 = 0;
110
111 Int_t nbBusSt45Tot = 0;
112 Int_t nbBusSt45Swap = 0;
113
114 // reads from file
36903978 115 while ( in.getline(line,80) ) {
116
117 if ( line[0] == '#' || line[0] == '\0' ) continue;
118 i = 0;
119 sscanf(line, "%d %s", &idDE, nameSlat);
120
121 // number of PCB's
122 while(nameSlat[i] < '4' && nameSlat[i] !='0') i++;
123 Int_t len = strlen(nameSlat);
124
125 // number of buspatch
126 if (i == 2 || i == 3)
127 nbBusPatch = 2;
128 else
129 nbBusPatch = 4;
130
131 // calculate the number of TB & BB
132 // R1: 2 bridges more per PCB
133 // R2 & R3: 1 translator more per PCB
134 if (i == 2) nbBB += 2;
135 if (i == 3) nbBB += 4;
136 if (i == 4) nbBB += 4;
137 if (i == 5) nbBB += 6;
138 if (i == 6) nbBB += 8;
139
140 nbTB += nbBusPatch;
08ce37ff 141 if (nameSlat[len-1] == '1') {
42c7b335 142 nbTB += 2;
143 nbBusPatch+=2;
08ce37ff 144 }
0a69c1eb 145 if (nameSlat[len-1] == '2' || nameSlat[len-1] == '3') {
36903978 146 nbTB += 1;
0a69c1eb 147 nbBusPatch++;
148 }
42c7b335 149
150 // station 3
151 // for buspatch length reasons, one ddl connects one 1/4 of two chambers
152 // really messy isn't it ?
153
154 if (idDE < 700 ) {
155
156 if (idDE == 500) {
157 iDDL++;
6e96542a 158 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1);
42c7b335 159 nbBusSt3Tot1 = 0;
160
161 }
162 if (idDE % 100 == 0) {
163 cout << "# Chamber " << idDE/100 << endl;
164 out << "# Chamber " << idDE/100 << endl;
165 }
166
167 nbBusSt3Tot1 += nbBusPatch;
168
169 // second 1/4 for chamber 5
170 if (idDE == 500+idSt3swp1) {
171 iDDLSt3Swap1 = iDDL++;
6e96542a 172 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1);
42c7b335 173 nbBusSt3Swap1 = nbBusSt3Tot1 - nbBusPatch;
174 nbBusSt3Tot1 = 0;
175 nbBusSt3Tot2 = 0;
176 }
177
178 // first 1/4 chamber 6
179 if (idDE == 600) {
180 iDDL = iDDLSt3Swap1;
6e96542a 181 begin[cursor] = AliMpBusPatch::GetGlobalBusID(nbBusSt3Swap1, iDDL-1);
42c7b335 182 }
183 // third 1/4 for chamber 5
184 if (idDE == 500+idSt3swp2) {
185 iDDL = iDDLSt3Swap1+1;
186 iDDLSt3Swap2 = iDDL++;
6e96542a 187 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1);
42c7b335 188 nbBusSt3Swap2 = nbBusSt3Tot2;
189 nbBusSt3Tot2 = 0;
190 nbBusSt3Tot3 = 0;
191 }
192 nbBusSt3Tot2 += nbBusPatch;
193
194 // second 1/4 chamber 6
195 if (idDE == 600 +idSt3swp1) {
196 iDDL = iDDLSt3Swap2;
6e96542a 197 begin[cursor] = AliMpBusPatch::GetGlobalBusID(nbBusSt3Swap2, iDDL-1);
42c7b335 198 }
199
200 // fourth 1/4 chamber 5
201 if (idDE == 500+idSt3swp3) {
202 iDDL = iDDLSt3Swap2+1;
203 iDDLSt3Swap3 = iDDL++;
6e96542a 204 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1);
42c7b335 205 nbBusSt3Swap3 = nbBusSt3Tot3;
206 nbBusSt3Tot2 = 0;
207 nbBusSt3Tot3 = 0;
208 nbBusSt3Tot4 = 0;
209 }
210 nbBusSt3Tot3 += nbBusPatch;
211
212 //third 1/4 chamber 6
213 if (idDE == 600)
214 nbBusSt3Swap4 = nbBusSt3Tot4;
215
216 if (idDE == 600 +idSt3swp2) {
217 iDDL = iDDLSt3Swap3;
6e96542a 218 begin[cursor] = AliMpBusPatch::GetGlobalBusID(nbBusSt3Swap3, iDDL-1);
42c7b335 219 nbBusSt3Tot4 += nbBusPatch;
220 }
221 nbBusSt3Tot4 += nbBusPatch;
222
223 // fourth 1/4 chamber 6
224 if (idDE == 600 +idSt3swp3) {
225 iDDL = iDDLSt3Swap3+1;
6e96542a 226 begin[cursor] = AliMpBusPatch::GetGlobalBusID(nbBusSt3Swap4, iDDL-1);
42c7b335 227 }
228
229 end[cursor] = begin[cursor] + nbBusPatch - 1;
230 begin[++cursor] = end[cursor] + 1;
231
232 cout << idDE << " " << begin[cursor-1]<<"-"<<end[cursor-1] << " " << iDDL-1 << " " <<nameSlat <<endl;
233 out << idDE << " " << begin[cursor-1]<<"-"<<end[cursor-1] <<" " << iDDL-1 <<endl;
234 }
235
236 // station 4 & 5
237 // back to normal one ddl connects one 1/2 chamber
238 // finally !
239 if (idDE == 700) {
240 iDDL = ((idDE-1)/100)*2;
241 }
242 if (idDE >= 700) {
243
36903978 244 if (idDE % 100 == 0) {
42c7b335 245 nbBusSt45Tot = 0;
36903978 246 iDDL++;
247 if (idDE >=800)
248 iDDL++;
6e96542a 249 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1);
36903978 250 cout << "# Chamber " << idDE/100 << endl;
251 out << "# Chamber " << idDE/100 << endl;
252 }
36903978 253
42c7b335 254 nbBusSt45Tot += nbBusPatch;
36903978 255
42c7b335 256 if (idDE == 700+idSt45swp1 || idDE == 800+idSt45swp1 || idDE == 900+idSt45swp1 || idDE == 1000+idSt45swp1 ) {
257 iDDL++;
6e96542a 258 begin[cursor] = AliMpBusPatch::GetGlobalBusID(0, iDDL-1);
42c7b335 259 nbBusSt45Swap = nbBusSt45Tot - nbBusPatch;
260 nbBusSt45Tot = 0;
261 }
262 if (idDE == 700+idSt45swp2 || idDE == 800+idSt45swp2 || idDE == 900+idSt45swp2 || idDE == 1000+idSt45swp2 ) {
36903978 263 iDDL--;
6e96542a 264 begin[cursor] = AliMpBusPatch::GetGlobalBusID(nbBusSt45Swap, iDDL-1);
42c7b335 265 }
266 end[cursor] = begin[cursor] + nbBusPatch - 1;
267 begin[++cursor] = end[cursor] + 1;
36903978 268
42c7b335 269 cout << idDE << " " << begin[cursor-1]<<"-"<<end[cursor-1] << " " << iDDL-1 << " " <<nameSlat <<endl;
270 out << idDE << " " << begin[cursor-1]<<"-"<<end[cursor-1] <<" " << iDDL-1 <<endl;
271 }
36903978 272
36903978 273 }
274 printf(" Slat: number of TB %d and BB %d\n", nbTB, nbBB);
275 in.close();
276 out.close();
277}