| 4c039060 |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| 16 | /* |
| 17 | $Log$ |
| 18 | */ |
| 19 | |
| 6edc06da |
20 | /////////////////////////////////////////////////////////////////////////////// |
| 21 | // // |
| 22 | // Photon Multiplicity Detector Version 1 // |
| 23 | // // |
| 24 | //Begin_Html |
| 25 | /* |
| 1439f98e |
26 | <img src="picts/AliPMDv2Class.gif"> |
| 6edc06da |
27 | */ |
| 28 | //End_Html |
| 29 | // // |
| 30 | /////////////////////////////////////////////////////////////////////////////// |
| 31 | #include "AliPMDv2.h" |
| 32 | #include "AliRun.h" |
| 33 | #include "AliMC.h" |
| 34 | #include "AliConst.h" |
| 35 | |
| 36 | static Float_t smod1[3], smod2[3], smod3[3], smod4[3]; |
| 37 | static Int_t maxbox, kdet; |
| 38 | static Float_t thgas,thcell,thmin,thmax,zdist,zdist1,thlow, |
| 39 | thhigh,edge; |
| 40 | static Int_t numqu; |
| 41 | static Float_t xbox[40][40], ybox[40][40]; |
| 42 | static Int_t pindex[40][40]; |
| 43 | |
| 44 | ClassImp(AliPMDv2) |
| 45 | //_____________________________________________________________________________ |
| 46 | AliPMDv2::AliPMDv2() : AliPMD() |
| 47 | { |
| 48 | // |
| 49 | // Default constructor |
| 50 | // |
| 51 | fMedSens=0; |
| 52 | } |
| 53 | |
| 54 | //_____________________________________________________________________________ |
| 55 | AliPMDv2::AliPMDv2(const char *name, const char *title) |
| 56 | : AliPMD(name,title) |
| 57 | { |
| 58 | // |
| 59 | // Standard constructor |
| 60 | // |
| 61 | fMedSens=0; |
| 62 | } |
| 63 | |
| 64 | //_____________________________________________________________________________ |
| 65 | void AliPMDv2::Coordnew() |
| 66 | { |
| 67 | // |
| 68 | // Find coordinates for pad geometry |
| 69 | // |
| 70 | // Author Y.P. Viyogi, VECC Calcutta |
| 71 | // |
| 72 | |
| 73 | Float_t th1, th2, dbox, dist; |
| 74 | //Float_t xoff[40][40], yoff[40][40]; |
| 75 | Int_t i, j, nbox; |
| 76 | Float_t rlow; |
| 77 | Int_t xoff1[3], yoff1[3], l; |
| 78 | Float_t rhigh, dmax, hole; |
| 79 | Int_t kk, nhol; |
| 80 | Float_t rr, xx, yy; |
| 81 | |
| 82 | th1 = thmin * kPI / 180; |
| 83 | th2 = thmax * kPI / 180; |
| 84 | /* ESTIMATES FOR OCTAGON */ |
| 85 | dist = zdist * TMath::Tan(th2); |
| 86 | /* *** 04.06.97 Fixed Module size of 6 cm, 0 mm boundary. */ |
| 87 | /* *** variable pad sizes of 0.3 mm, 0.5 mm, 1.0 mm and 1.2 mm */ |
| 88 | dbox = edge * 2 + 24; |
| 89 | maxbox = Int_t(dist / dbox + .5); |
| 90 | dmax= maxbox * dbox; |
| 91 | /* NOW GET THE HOLE SIZE ETC. */ |
| 92 | hole = zdist * TMath::Tan(th1); |
| 93 | nhol = Int_t(hole / dbox + .5); |
| 94 | hole = nhol * dbox; |
| 95 | |
| 96 | rlow = zdist * TMath::Tan(thlow * kPI / 180); |
| 97 | rhigh = zdist * TMath::Tan(thhigh * kPI / 180); |
| 98 | for (i = 1; i <= 40; ++i) { |
| 99 | for (j = 1; j <= 40; ++j) { |
| 100 | //index[j][i] = 0; |
| 101 | //xoff[j][i] = 0; |
| 102 | //yoff[j][i] = 0; |
| 103 | xbox[j][i] = 0; |
| 104 | /* L5: */ |
| 105 | ybox[j][i] = 0; |
| 106 | } |
| 107 | } |
| 108 | |
| 109 | // NOW START PLACING THE BOXES IN VARIOUS LAYERS, START FROM THE CENTRE |
| 110 | |
| 111 | yy = dbox / 2; |
| 112 | for(i=0;i<3;i++) yoff1[i]=0; |
| 113 | nbox = 0; |
| 114 | // PRINT*,'MAXBOX=',MAXBOX |
| 115 | for (i = 1; i <= maxbox; ++i) { |
| 116 | xx = dbox / 2; |
| 117 | for(j=0;j<3;j++) xoff1[j]=0; |
| 118 | for (j = 1; j <= maxbox; ++j) { |
| 119 | rr = sqrt(xx*xx+yy*yy); |
| 120 | if (rr >= hole && rr <= dmax) { |
| 121 | // BOX CAN BE FITTED |
| 122 | //index[j][i] = 2; |
| 123 | //if (rr < rlow) index[j][i] = 1; |
| 124 | //else if (rr > rhigh) index[j][i] = 3; |
| 125 | xbox[j][i] = xx; |
| 126 | ybox[j][i] = yy; |
| 127 | ++nbox; |
| 128 | //xoff[j][i] = xoff1[index[j][i] - 1]; |
| 129 | //yoff[j][i] = yoff1[index[j][i] - 1]; |
| 130 | } |
| 131 | if (kdet == 1) kk = 1; else kk = 0; |
| 132 | for (l = 1; l <= 3; ++l) |
| 133 | xoff1[l - 1] += fNumPads[l + kk - 1]; |
| 134 | xx += dbox; |
| 135 | } |
| 136 | |
| 137 | if (kdet == 1) kk = 1; else kk=0; |
| 138 | |
| 139 | for (l = 1; l <= 3; ++l) |
| 140 | yoff1[l - 1] += fNumPads[l + kk - 1]; |
| 141 | yy += dbox; |
| 142 | } |
| 143 | } |
| 144 | |
| 145 | //_____________________________________________________________________________ |
| 146 | void AliPMDv2::Coordinates() |
| 147 | { |
| 148 | // |
| 149 | // SUBROUTINE TO COMPUTE THE X- AND Y- COORDINATES OF THE BOXES |
| 150 | // WHICH CAN FIT INTO THE CIRCULAR REGION BETWEEN THE GIVEN ANGLES. |
| 151 | // INPUT : ZDIST, THMIN, THMAX, PADSIZE (FOR INSIDE and OUTSIDE PMD). |
| 152 | // ALL DIMENSIONS IN CM. |
| 153 | // -- Author : Y.P. VIYOGI, 10/05/1996. |
| 154 | |
| 155 | Float_t hole, dmax, dbox; |
| 156 | Int_t nhol; |
| 157 | Float_t dist; |
| 158 | Int_t nbox; |
| 159 | Float_t rlow; |
| 160 | Int_t i, j; |
| 161 | Float_t rhigh, rr, xx, yy, th1, th2; |
| 162 | |
| 163 | th1 = thmin*kPI/180; |
| 164 | th2 = thmax*kPI/180; |
| 165 | // ESTIMATES FOR OCTAGON |
| 166 | dist = zdist * TMath::Tan(th2); |
| 167 | // *** 04.06.97 Fixed Module size of 24 cm, 3 mm boundary. |
| 168 | // *** variable pad sizes of 8 mm, 10 mm, 12mm and 15 mm |
| 169 | dbox = edge*2 + 24.; |
| 170 | maxbox = Int_t(dist / dbox + .5); |
| 171 | dmax = maxbox*dbox; |
| 172 | // NOW GET THE HOLE SIZE ETC. |
| 173 | hole = zdist * TMath::Tan(th1); |
| 174 | nhol = Int_t(hole / dbox + .5); |
| 175 | hole = nhol * dbox; |
| 176 | |
| 177 | rlow = zdist * TMath::Tan(thlow*kPI/180); |
| 178 | rhigh = zdist * TMath::Tan(thhigh*kPI/180); |
| 179 | for (i = 0; i < 40; ++i) { |
| 180 | for (j = 0; j < 40; ++j) { |
| 181 | pindex[j][i] = 0; |
| 182 | xbox[j][i] = 0; |
| 183 | ybox[j][i] = 0; |
| 184 | } |
| 185 | } |
| 186 | |
| 187 | // NOW START PLACING THE BOXES IN VARIOUS LAYERS, START FROM THE CENTRE |
| 188 | yy = dbox / 2; |
| 189 | nbox = 0; |
| 190 | for (i = 0; i < maxbox; ++i) { |
| 191 | xx = dbox / 2; |
| 192 | for (j = 0; j < maxbox; ++j) { |
| 193 | rr = TMath::Sqrt(xx*xx + yy*yy); |
| 194 | if (rr >= hole && rr <= dmax) { // BOX CAN BE FITTED |
| 195 | pindex[j][i] = 2; |
| 196 | if (rr < rlow) pindex[j][i] = 1; |
| 197 | if (rr > rhigh) pindex[j][i] = 3; |
| 198 | xbox[j][i] = xx; |
| 199 | ybox[j][i] = yy; |
| 200 | ++nbox; |
| 201 | } |
| 202 | xx += dbox; |
| 203 | } |
| 204 | yy += dbox; |
| 205 | } |
| 206 | } |
| 207 | |
| 208 | //_____________________________________________________________________________ |
| 209 | void AliPMDv2::CreateGeometry() |
| 210 | { |
| 211 | // |
| 212 | // Create geometry for Photon Multiplicity Detector Version 1 |
| 213 | // |
| 214 | //Begin_Html |
| 215 | /* |
| 1439f98e |
216 | <img src="picts/AliPMDv2.gif"> |
| 6edc06da |
217 | */ |
| 218 | //End_Html |
| 219 | //Begin_Html |
| 220 | /* |
| 1439f98e |
221 | <img src="picts/AliPMDv2Tree.gif"> |
| 6edc06da |
222 | */ |
| 223 | //End_Html |
| 224 | CreatePads(); |
| 225 | CreateInside(); |
| 226 | } |
| 227 | |
| 228 | //_____________________________________________________________________________ |
| 229 | void AliPMDv2::CreateInside() |
| 230 | { |
| 231 | // |
| 232 | // Create inside of Pads |
| 233 | // |
| 234 | // -- Author : Y.P. VIYOGI, 07/05/1996. |
| 235 | // -- Modified: P.V.K.S.Baba(JU), 15-12-97. |
| 236 | |
| 237 | Float_t sipmd[3] = { 300.,300.,5. }; |
| 238 | |
| 239 | Int_t i2; |
| 240 | |
| 241 | Float_t xiqa[4], yiqa[4]; |
| 242 | Int_t inum2, inum3, inum4, i, j, k; |
| 243 | Float_t siqad[4]; |
| 244 | Float_t zd, xd, yd, xp, yp, zp; |
| 245 | Int_t idrotm[100]; |
| 246 | |
| ad51aeb0 |
247 | Int_t *idtmed = fIdtmed->GetArray()-599; |
| 6edc06da |
248 | |
| 249 | // VOLUMES Names : begining with D for all PMD volumes, |
| 250 | // The names of SIZE variables begin with S and have more meaningful |
| 251 | // characters as shown below. |
| 252 | |
| 253 | // VOLUME SIZE MEDIUM : REMARKS |
| 254 | // ------ ----- ------ : --------------------------- |
| 255 | |
| 256 | // DPMD SIPMD AIR : INSIDE PMD and its SIZE |
| 257 | |
| 258 | |
| 259 | |
| 260 | // *** Define the DPMD Volume and fill with air *** |
| 261 | |
| cfce8870 |
262 | gMC->Gsvolu("DPMD", "BOX ", idtmed[698], sipmd, 3); |
| 6edc06da |
263 | |
| 264 | // *** Define DIQU Volume and fill with air |
| 265 | siqad[0] = sipmd[0] / 2. - 1.; |
| 266 | siqad[1] = sipmd[1] / 2. - 1.; |
| 267 | siqad[2] = sipmd[2]; |
| cfce8870 |
268 | gMC->Gsvolu("DIQU","BOX ", idtmed[698], siqad, 3); |
| 269 | gMC->Gsatt("DIQU", "SEEN", 1); |
| 6edc06da |
270 | |
| 271 | |
| 272 | // --- Place the modules in INSIDE PMD (DPMD) |
| 273 | // --- FIRST CALCULATE THE COORDINATES OF THE MODULES WHICH CAN BE |
| 274 | // --- ACCOMODATED. |
| 275 | |
| 276 | kdet = 1; |
| 277 | Coordinates(); |
| 278 | |
| 279 | //inum = 0; |
| 280 | zd = 0.; |
| 281 | AliMatrix(idrotm[1], 90., 0., 90., 90., 0., 0.); |
| 282 | AliMatrix(idrotm[2], 90., 180., 90., 90., 0., 0.); |
| 283 | AliMatrix(idrotm[3], 90., 180., 90., 270., 0., 0.); |
| 284 | AliMatrix(idrotm[4], 90., 0., 90., 270., 0., 0.); |
| 285 | // **** Filling the DIQU Vol. (One Quadrant) |
| 286 | inum2 = 0; |
| 287 | inum3 = 0; |
| 288 | inum4 = 0; |
| 289 | for (i = 0; i < maxbox; ++i) { |
| 290 | i2 = maxbox; |
| 291 | for (j = 0; j < i2; ++j) { |
| 292 | if (xbox[j][i] <= 0 && ybox[j][i] <= 0) continue; |
| 293 | xd = xbox[j][i] - siqad[0]; |
| 294 | yd = ybox[j][i] - siqad[1]; |
| 295 | if (pindex[j][i] == 1) { |
| 296 | ++inum2; |
| cfce8870 |
297 | gMC->Gsposp("DM11", inum2, "DIQU", xd, yd, zd, 0, "ONLY", smod2, 3); |
| 6edc06da |
298 | } |
| 299 | if (pindex[j][i] == 2) { |
| 300 | ++inum3; |
| cfce8870 |
301 | gMC->Gsposp("DM12", inum3, "DIQU", xd, yd, zd, 0, "ONLY", smod3, 3); |
| 6edc06da |
302 | } |
| 303 | if (pindex[j][i] == 3) { |
| 304 | ++inum4; |
| cfce8870 |
305 | gMC->Gsposp("DM13", inum4, "DIQU", xd, yd, zd, 0, "ONLY", smod4, 3); |
| 6edc06da |
306 | } |
| 307 | } |
| 308 | } |
| 309 | xiqa[0] = siqad[0]; |
| 310 | xiqa[1] = -siqad[0]; |
| 311 | xiqa[2] = xiqa[1]; |
| 312 | xiqa[3] = xiqa[0]; |
| 313 | yiqa[0] = siqad[0]; |
| 314 | yiqa[1] = yiqa[0]; |
| 315 | yiqa[2] = -siqad[0]; |
| 316 | yiqa[3] = yiqa[2]; |
| 317 | i2 = numqu; |
| 318 | for (k = 1; k <= i2; ++k) { |
| cfce8870 |
319 | gMC->Gsposp("DIQU", k, "DPMD", xiqa[k-1], yiqa[k-1], zd, idrotm[k], "ONLY", siqad, 3); |
| 6edc06da |
320 | } |
| 321 | |
| 322 | // --- Place the DPMD in ALICE with front edge 6.0m from vertex --- |
| 323 | xp = 0.; |
| 324 | yp = 0.; |
| 325 | zp = zdist1; |
| cfce8870 |
326 | gMC->Gspos("DPMD", 1, "ALIC", xp, yp, zp, 0, "ONLY"); |
| 6edc06da |
327 | |
| 328 | } |
| 329 | |
| 330 | //_____________________________________________________________________________ |
| 331 | void AliPMDv2::CreatePads() |
| 332 | { |
| 333 | // |
| 334 | // Create the geometry of the pads |
| 335 | // *** DEFINITION OF THE GEOMETRY OF THE PMD *** |
| 336 | // *** DIFFERENT PADS WITH SIZES 8 MM, 10 MM, 12 MM AND 15 MM SQUARE |
| 337 | // -- Author : Y.P. VIYOGI, 04/06/1997. |
| 338 | // -- Modified: P.V.K.S.Baba(JU), 13-12-97. |
| 339 | |
| 6edc06da |
340 | Int_t npad1, npad2, npad3, npad4; |
| 341 | Float_t spad1[3], spad2[3], spad3[3], spad4[3]; |
| 342 | Float_t scpv1[3], scpv2[3], scpv3[3], scpv4[3]; |
| 343 | Int_t i, j; |
| 344 | Float_t sstr1[3], spsw1[3], sstr2[3], spsw2[3], sstr3[3], spsw3[3], |
| 345 | sstr4[3], spsw4[3]; |
| 346 | Float_t xa, ya, za, xb, yb, zb, xc, sw[3], yc, zc; |
| 347 | Float_t sfe[3]; |
| 348 | Float_t spb[3], pad1, pad2, pad3, pad4; |
| 349 | // VOLUMES Names : begining with D for all PMD volumes, |
| 350 | // DMO1 : MODULE TYPE 1 ( 8 MM PADS) |
| 351 | // DM11 : MODULE TYPE 2 (10 MM PADS) |
| 352 | // DM12 : MODULE TYPE 3 (12 MM PADS) |
| 353 | // DM13 : MODULE TYPE 4 (15 MM PADS) |
| 354 | |
| 355 | // The names of SIZE variables begin with S and have more meaningful |
| 356 | // characters as shown below. |
| 357 | |
| 358 | // VOLUME SIZE MEDIUM : REMARKS |
| 359 | // ------ ----- ------ : --------------------------- |
| 360 | |
| 361 | // DPPB SPB PB : PB Converter and its SIZE |
| 362 | // DPFE SFE FE : FE Support Plate and its SIZE |
| 363 | |
| 364 | // DP11 SPAD2 GAS : PAD TYPE 2 (10 MM) |
| 365 | // DP12 SPAD2 GAS : PAD TYPE 2 FOR CPV(10 MM) |
| 366 | // DS11 SSTR2 FE : STRIP OF IRON |
| 367 | // DW11 SPSW2 G10 : PRESHOWER |
| 368 | // DV11 SCPV2 G10 : CPV |
| 369 | |
| 370 | // DP13 SPAD3 GAS : PAD TYPE 3 (12 MM) |
| 371 | // DP14 SPAD3 GAS : PAD TYPE 3 FOR CPV(12 MM) |
| 372 | // DS12 SSTR3 FE : STRIP OF IRON |
| 373 | // DW12 SPSW3 G10 : PRESHOWER |
| 374 | // DV12 SCPV3 G10 : CPV |
| 375 | |
| 376 | // DP15 SPAD4 GAS : PAD TYPE 4 (15 MM) |
| 377 | // DP16 SPAD4 GAS : PAD TYPE 4 FOR CPV(15 MM) |
| 378 | // DS13 SSTR4 FE : STRIP OF IRON |
| 379 | // DW13 SPSW4 G10 : PRESHOWER |
| 380 | // DV13 SCPV4 G10 : CPV |
| 381 | |
| 382 | // ****************** VOLUME TREE ****************** |
| 383 | |
| 384 | // DM11 (Module) |
| 385 | // | |
| 386 | // | |
| 387 | // ------------------------------------------------- |
| 388 | // | | | | |
| 389 | // | | | | |
| 390 | // DV11( CPV) DPFE DPPB DW11(Preshower) |
| 391 | // | | |
| 392 | // | | |
| 393 | // DS12(Strip) DS11(Strip) |
| 394 | // | | |
| 395 | // | | |
| 396 | // DP12(Pads) DP11(Pads) |
| 397 | |
| 398 | // ************************************************************ |
| 399 | |
| 400 | // --- The above gives the Volume Tree. PAD is a gas cell of size |
| 401 | // --- given by PADSIZE in the input cards. STRIP is a collection of |
| 402 | //--- PADs in a row. STRIPs are positioned in the PRESHOWER BOX. This is |
| 403 | //--- then placed in the MODULE. The PSW and the MODULE have the same size |
| 404 | // --- ; Lead converter, Iron support plate are also placed |
| 405 | // --- in the MODULE. |
| 406 | |
| 407 | |
| 408 | // DATA PAD1,PAD2,PAD3,PAD4/4*0.8/ |
| 409 | // DATA NPAD1,NPAD2,NPAD3,NPAD4/4*30/ |
| 410 | |
| ad51aeb0 |
411 | Int_t *idtmed = fIdtmed->GetArray()-599; |
| 6edc06da |
412 | |
| 413 | // **** PAD SIZE 8 MM |
| 414 | // pmdin = fPar[0]; |
| 415 | // pmdout = fPar[1]; |
| 416 | thgas = fPar[2]; |
| 417 | thcell = fPar[3]; |
| 418 | thmin = fIn[0]; |
| 419 | thmax = fIn[1]; |
| 420 | zdist1 = fIn[2]; |
| 421 | zdist = TMath::Abs(zdist1); |
| 422 | thlow = fIn[3]; |
| 423 | thhigh = fIn[4]; |
| 424 | // wafer = fGeo[0]; |
| 425 | edge = fGeo[1]; |
| 426 | numqu = Int_t(fGeo[2]); |
| 427 | |
| 428 | |
| 429 | // *BABA |
| 430 | pad1 = fPadSize[0]; |
| 431 | pad2 = fPadSize[1]; |
| 432 | pad3 = fPadSize[2]; |
| 433 | pad4 = fPadSize[3]; |
| 434 | npad1 = Int_t(24/fPadSize[0]); |
| 435 | npad2 = Int_t(24/fPadSize[1]); |
| 436 | npad3 = Int_t(24/fPadSize[2]); |
| 437 | npad4 = Int_t(24/fPadSize[3]); |
| 438 | // *BABA |
| 439 | spad1[0] = (pad1 - thcell) / 2.; |
| 440 | spad1[1] = spad1[0]; |
| 441 | spad1[2] = thgas / 2; |
| cfce8870 |
442 | gMC->Gsvolu("DP21", "BOX ", idtmed[604], spad1, 3); |
| 443 | gMC->Gsatt("DP21", "SEEN", 1); |
| 444 | gMC->Gsvolu("DP22", "BOX ", idtmed[604], spad1, 3); |
| 445 | gMC->Gsatt("DP22", "SEEN", 1); |
| 6edc06da |
446 | |
| 447 | sstr1[0] = npad1*pad1/2; |
| 448 | sstr1[1] = pad1/2; |
| 449 | sstr1[2] = thgas/2; |
| cfce8870 |
450 | gMC->Gsvolu("DS21", "BOX ", idtmed[605], sstr1, 3); |
| 451 | gMC->Gsatt("DS21", "SEEN", 1); |
| 452 | gMC->Gsvolu("DS22", "BOX ", idtmed[605], sstr1, 3); |
| 453 | gMC->Gsatt("DS22", "SEEN", 1); |
| 6edc06da |
454 | |
| 455 | spsw1[0] = sstr1[0] + edge; |
| 456 | spsw1[1] = spsw1[0]; |
| 457 | spsw1[2] = (thgas + .4) / 2; |
| 458 | // 2 mm G10 Plate cover (NMATE = 808) |
| 459 | scpv1[0] = spsw1[0]; |
| 460 | scpv1[1] = spsw1[1]; |
| 461 | scpv1[2] = spsw1[2]; |
| cfce8870 |
462 | gMC->Gsvolu("DW21", "BOX ", idtmed[607], spsw1, 3); |
| 463 | gMC->Gsatt("DW21", "SEEN", 1); |
| 464 | gMC->Gsvolu("DV21", "BOX ", idtmed[607], spsw1, 3); |
| 465 | gMC->Gsatt("DV21", "SEEN", 1); |
| 6edc06da |
466 | |
| 467 | // --- place pads in a strip |
| 468 | xa = (-npad1 + 1.) * pad1 / 2.; |
| 469 | ya = 0.; |
| 470 | za = 0.; |
| 471 | for (i = 1; i <= npad1; ++i) { |
| cfce8870 |
472 | gMC->Gsposp("DP21", i, "DS21", xa, ya, za, 0, "ONLY", spad1, 3); |
| 473 | gMC->Gsposp("DP22", i, "DS22", xa, ya, za, 0, "ONLY", spad1, 3); |
| 6edc06da |
474 | xa += pad1; |
| 475 | } |
| 476 | // --- place strips in the PRESHOWER AND CPV boxes |
| 477 | xb = 0.; |
| 478 | yb = (-npad1 + 1.) * pad1 / 2.; |
| 479 | zb = 0.; |
| 480 | for (j = 1; j <= npad1; ++j) { |
| cfce8870 |
481 | gMC->Gsposp("DS21", j, "DW21", xb, yb, zb, 0, "ONLY", sstr1, 3); |
| 482 | gMC->Gsposp("DS22", j, "DV21", xb, yb, zb, 0, "ONLY", sstr1, 3); |
| 6edc06da |
483 | yb += pad1; |
| 484 | } |
| 485 | |
| 486 | // **** PAD SIZE 10 MM |
| 487 | |
| 488 | spad2[0] = (pad2 - thcell) / 2.; |
| 489 | spad2[1] = spad2[0]; |
| 490 | spad2[2] = thgas / 2; |
| cfce8870 |
491 | gMC->Gsvolu("DP11", "BOX ", idtmed[604], spad2, 3); |
| 492 | gMC->Gsatt("DP11", "SEEN", 1); |
| 493 | gMC->Gsvolu("DP12", "BOX ", idtmed[604], spad2, 3); |
| 494 | gMC->Gsatt("DP12", "SEEN", 1); |
| 6edc06da |
495 | |
| 496 | sstr2[0] = npad2 * pad2 / 2; |
| 497 | sstr2[1] = pad2 / 2; |
| 498 | sstr2[2] = thgas / 2; |
| cfce8870 |
499 | gMC->Gsvolu("DS11", "BOX ", idtmed[605], sstr2, 3); |
| 500 | gMC->Gsatt("DS11", "SEEN", 1); |
| 501 | gMC->Gsvolu("DS12", "BOX ", idtmed[605], sstr2, 3); |
| 502 | gMC->Gsatt("DS12", "SEEN", 1); |
| 6edc06da |
503 | |
| 504 | spsw2[0] = sstr2[0] + edge; |
| 505 | spsw2[1] = spsw2[0]; |
| 506 | spsw2[2] = (thgas + .4) / 2; |
| 507 | // 2 mm G10 Plate cover (NMATE = 808) |
| 508 | scpv2[0] = spsw2[0]; |
| 509 | scpv2[1] = spsw2[1]; |
| 510 | scpv2[2] = spsw2[2]; |
| cfce8870 |
511 | gMC->Gsvolu("DW11","BOX ", idtmed[607], spsw2, 3); |
| 512 | gMC->Gsatt("DW11", "SEEN", 1); |
| 513 | gMC->Gsvolu("DV11","BOX ", idtmed[607], spsw2, 3); |
| 514 | gMC->Gsatt("DV11", "SEEN", 1); |
| 6edc06da |
515 | |
| 516 | // --- place pads in a strip |
| 517 | xa = (-npad2 + 1.) * pad2 / 2.; |
| 518 | ya = 0.; |
| 519 | za = 0.; |
| 520 | for (i = 1; i <= npad2; ++i) { |
| cfce8870 |
521 | gMC->Gsposp("DP11", i, "DS11", xa, ya, za, 0, "ONLY", spad2, 3); |
| 522 | gMC->Gsposp("DP12", i, "DS12", xa, ya, za, 0, "ONLY", spad2, 3); |
| 6edc06da |
523 | xa += pad2; |
| 524 | } |
| 525 | // --- place strips in the PRESHOWER AND CPV boxes |
| 526 | xb = 0.; |
| 527 | yb = (-npad2 + 1.) * pad2 / 2.; |
| 528 | zb = 0.; |
| 529 | for (j = 1; j <= npad2; ++j) { |
| cfce8870 |
530 | gMC->Gsposp("DS11", j, "DW11", xb, yb, zb, 0, "ONLY", sstr2, 3); |
| 531 | gMC->Gsposp("DS12", j, "DV11", xb, yb, zb, 0, "ONLY", sstr2, 3); |
| 6edc06da |
532 | yb += pad2; |
| 533 | } |
| 534 | |
| 535 | // **** PAD SIZE 12 MM |
| 536 | |
| 537 | spad3[0] = (pad3 - thcell) / 2.; |
| 538 | spad3[1] = spad3[0]; |
| 539 | spad3[2] = thgas / 2; |
| cfce8870 |
540 | gMC->Gsvolu("DP13", "BOX ", idtmed[604], spad3, 3); |
| 541 | gMC->Gsatt("DP13", "SEEN", 1); |
| 542 | gMC->Gsvolu("DP14", "BOX ", idtmed[604], spad3, 3); |
| 543 | gMC->Gsatt("DP14", "SEEN", 1); |
| 6edc06da |
544 | |
| 545 | sstr3[0] = npad3 * pad3 / 2; |
| 546 | sstr3[1] = pad3 / 2; |
| 547 | sstr3[2] = thgas / 2; |
| cfce8870 |
548 | gMC->Gsvolu("DS13", "BOX ", idtmed[605], sstr3, 3); |
| 549 | gMC->Gsatt("DS13", "SEEN", 1); |
| 550 | gMC->Gsvolu("DS14", "BOX ", idtmed[605], sstr3, 3); |
| 551 | gMC->Gsatt("DS14", "SEEN", 1); |
| 6edc06da |
552 | |
| 553 | spsw3[0] = sstr3[0] + edge; |
| 554 | spsw3[1] = spsw3[0]; |
| 555 | spsw3[2] = (thgas + .4) / 2; |
| 556 | // 2 mm G10 Plate cover (NMATE = 808) |
| 557 | scpv3[0] = spsw3[0]; |
| 558 | scpv3[1] = spsw3[1]; |
| 559 | scpv3[2] = spsw3[2]; |
| cfce8870 |
560 | gMC->Gsvolu("DW12","BOX ", idtmed[607], spsw3, 3); |
| 561 | gMC->Gsatt("DW12", "SEEN", 1); |
| 562 | gMC->Gsvolu("DV12","BOX ", idtmed[607], spsw3, 3); |
| 563 | gMC->Gsatt("DV12", "SEEN", 1); |
| 6edc06da |
564 | |
| 565 | // --- place pads in a strip |
| 566 | xa = (-npad3 + 1.) * pad3 / 2.; |
| 567 | ya = 0.; |
| 568 | za = 0.; |
| 569 | for (i = 1; i <= npad3; ++i) { |
| cfce8870 |
570 | gMC->Gsposp("DP13", i, "DS13", xa, ya, za, 0, "ONLY", spad3, 3); |
| 571 | gMC->Gsposp("DP14", i, "DS14", xa, ya, za, 0, "ONLY", spad3, 3); |
| 6edc06da |
572 | xa += pad3; |
| 573 | } |
| 574 | // --- place strips in the PRESHOWER AND CPV boxes |
| 575 | xb = 0.; |
| 576 | yb = (-npad3 + 1.) * pad3 / 2.; |
| 577 | zb = 0.; |
| 578 | for (j = 1; j <= npad3; ++j) { |
| cfce8870 |
579 | gMC->Gsposp("DS13", j, "DW12", xb, yb, zb, 0, "ONLY", sstr3, 3); |
| 580 | gMC->Gsposp("DS14", j, "DV12", xb, yb, zb, 0, "ONLY", sstr3, 3); |
| 6edc06da |
581 | yb += pad3; |
| 582 | } |
| 583 | |
| 584 | // **** PAD SIZE 15 MM |
| 585 | |
| 586 | spad4[0] = (pad4 - thcell) / 2.; |
| 587 | spad4[1] = spad4[0]; |
| 588 | spad4[2] = thgas / 2; |
| cfce8870 |
589 | gMC->Gsvolu("DP15","BOX ", idtmed[604], spad4, 3); |
| 590 | gMC->Gsatt("DP15", "SEEN", 1); |
| 591 | gMC->Gsvolu("DP16","BOX ", idtmed[604], spad4, 3); |
| 592 | gMC->Gsatt("DP16", "SEEN", 1); |
| 6edc06da |
593 | |
| 594 | sstr4[0] = npad4 * pad4 / 2; |
| 595 | sstr4[1] = pad4 / 2; |
| 596 | sstr4[2] = thgas / 2; |
| cfce8870 |
597 | gMC->Gsvolu("DS15","BOX ", idtmed[605], sstr4, 3); |
| 598 | gMC->Gsatt("DS15", "SEEN", 1); |
| 599 | gMC->Gsvolu("DS16","BOX ", idtmed[605], sstr4, 3); |
| 600 | gMC->Gsatt("DS16", "SEEN", 1); |
| 6edc06da |
601 | |
| 602 | spsw4[0] = sstr4[0] + edge; |
| 603 | spsw4[1] = spsw4[0]; |
| 604 | spsw4[2] = (thgas + .4) / 2; |
| 605 | // 2 mm G10 Plate cover (NMATE = 808) |
| 606 | scpv4[0] = spsw4[0]; |
| 607 | scpv4[1] = spsw4[1]; |
| 608 | scpv4[2] = spsw4[2]; |
| cfce8870 |
609 | gMC->Gsvolu("DW13","BOX ", idtmed[607], spsw4, 3); |
| 610 | gMC->Gsatt("DW13", "SEEN", 1); |
| 611 | gMC->Gsvolu("DV13","BOX ", idtmed[607], spsw4, 3); |
| 612 | gMC->Gsatt("DV13", "SEEN", 1); |
| 6edc06da |
613 | |
| 614 | // --- place pads in a strip |
| 615 | xa = (-npad4 + 1.) * pad4 / 2.; |
| 616 | ya = 0.; |
| 617 | za = 0.; |
| 618 | for (i = 1; i <= npad4; ++i) { |
| cfce8870 |
619 | gMC->Gsposp("DP15", i, "DS15", xa, ya, za, 0, "ONLY", spad4, 3); |
| 620 | gMC->Gsposp("DP16", i, "DS16", xa, ya, za, 0, "ONLY", spad4, 3); |
| 6edc06da |
621 | xa += pad4; |
| 622 | } |
| 623 | // --- place strips in the PRESHOWER AND CPV boxes |
| 624 | xb = 0.; |
| 625 | yb = (-npad4 + 1.) * pad4 / 2.; |
| 626 | zb = 0.; |
| 627 | for (j = 1; j <= npad4; ++j) { |
| cfce8870 |
628 | gMC->Gsposp("DS15", j, "DW13", xb, yb, zb, 0, "ONLY", sstr4, 3); |
| 629 | gMC->Gsposp("DS16", j, "DV13", xb, yb, zb, 0, "ONLY", sstr4, 3); |
| 6edc06da |
630 | yb += pad4; |
| 631 | } |
| 632 | |
| 633 | |
| 634 | // --- DEFINE MODULES, IRON, TUNGSTEN AND LEAD VOLUMES |
| 635 | |
| 636 | |
| 637 | spb[0] = spsw1[0]; |
| 638 | spb[1] = spsw1[1]; |
| 639 | spb[2] = .75; |
| cfce8870 |
640 | gMC->Gsvolu("DPPB","BOX ", idtmed[600], spb, 3); |
| 641 | gMC->Gsatt("DPPB", "SEEN", 1); |
| 6edc06da |
642 | |
| 643 | sw[0] = spsw1[0]; |
| 644 | sw[1] = spsw1[1]; |
| 645 | sw[2] = 0.9/2.; |
| cfce8870 |
646 | gMC->Gsvolu("DPW ","BOX ", idtmed[600], sw, 3); |
| 647 | gMC->Gsatt("DPW ", "SEEN", 1); |
| 6edc06da |
648 | |
| 649 | sfe[0] = spsw1[0]; |
| 650 | sfe[1] = spsw1[1]; |
| 651 | sfe[2] = 0.6/2.; |
| cfce8870 |
652 | gMC->Gsvolu("DPFE","BOX ", idtmed[605], sfe, 3); |
| 653 | gMC->Gsatt("DPFE", "SEEN", 1); |
| 6edc06da |
654 | |
| 655 | smod1[0] = spsw1[0]; |
| 656 | smod1[1] = smod1[0]; |
| 657 | // SMOD1(3)=SPSW1(3)+SFE(3)+SW (3)+SCPV1(3) |
| 658 | smod1[2] = spsw1[2] + sfe[2] + spb[2] + scpv1[2]; |
| cfce8870 |
659 | gMC->Gsvolu("DM21", "BOX ", idtmed[698], smod1, 3); |
| 6edc06da |
660 | |
| 661 | smod2[0] = spsw2[0]; |
| 662 | smod2[1] = smod2[0]; |
| 663 | smod2[2] = spsw2[2] + sfe[2] + spb[2] + scpv2[2]; |
| cfce8870 |
664 | gMC->Gsvolu("DM11", "BOX ", idtmed[698], smod2, 3); |
| 6edc06da |
665 | |
| 666 | smod3[0] = spsw3[0]; |
| 667 | smod3[1] = smod3[0]; |
| 668 | smod3[2] = spsw3[2] + sfe[2] + spb[2] + scpv3[2]; |
| cfce8870 |
669 | gMC->Gsvolu("DM12", "BOX ", idtmed[698], smod3, 3); |
| 6edc06da |
670 | |
| 671 | smod4[0] = spsw4[0]; |
| 672 | smod4[1] = smod4[0]; |
| 673 | smod4[2] = spsw4[2] + sfe[2] + spb[2] + scpv4[2]; |
| cfce8870 |
674 | gMC->Gsvolu("DM13", "BOX ", idtmed[698], smod4, 3); |
| 6edc06da |
675 | |
| 676 | // **** MODULE TYPE 1 : ALWAYS WITH TUNSGTEN CONVERTER |
| 677 | |
| 678 | // *** try with PB once 8.6.97 |
| 679 | |
| 680 | // --- place gas box (as CPV), iron support, lead converter and gas box |
| 681 | // --- (preshower) in the module |
| 682 | xc = 0.; |
| 683 | yc = 0.; |
| 684 | // --- First the CPV box |
| 685 | zc = -(spsw1[2] + sfe[2] + spb[2] + spsw1[2]) + spsw1[2]; |
| cfce8870 |
686 | gMC->Gspos("DV21", 1, "DM21", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
687 | // --- Then iron support plate |
| 688 | zc = zc + sfe[2] + spsw1[2]; |
| cfce8870 |
689 | gMC->Gspos("DPFE", 1, "DM21", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
690 | // --- Then converter plate |
| 691 | zc = zc + sfe[2] + spb[2]; |
| cfce8870 |
692 | gMC->Gspos("DPPB", 1, "DM21", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
693 | // --- Lastly the preshower box |
| 694 | zc = zc + spb[2] + spsw1[2]; |
| cfce8870 |
695 | gMC->Gspos("DW21", 1, "DM21", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
696 | |
| 697 | // **** MODULE TYPE 2 |
| 698 | |
| 699 | // --- place gas box (as CPV), iron support, lead converter and gas box |
| 700 | // --- (preshower) in the module |
| 701 | xc = 0.; |
| 702 | yc = 0.; |
| 703 | // --- First the CPV box |
| 704 | zc = -(spsw2[2] + sfe[2] + spb[2] + spsw2[2]) + spsw2[2]; |
| cfce8870 |
705 | gMC->Gspos("DV11", 1, "DM11", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
706 | // --- Then iron support plate |
| 707 | zc = zc + sfe[2] + spsw2[2]; |
| cfce8870 |
708 | gMC->Gspos("DPFE", 1, "DM11", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
709 | // --- Then lead converter plate |
| 710 | zc = zc + sfe[2] + spb[2]; |
| cfce8870 |
711 | gMC->Gspos("DPPB", 1, "DM11", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
712 | // --- Lastly the preshower box |
| 713 | zc = zc + spb[2] + spsw2[2]; |
| cfce8870 |
714 | gMC->Gspos("DW11", 1, "DM11", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
715 | |
| 716 | |
| 717 | // **** MODULE TYPE 3 |
| 718 | |
| 719 | // --- place gas box (as CPV), iron support, lead converter and gas box |
| 720 | // --- (preshower) in the module |
| 721 | xc = 0.; |
| 722 | yc = 0.; |
| 723 | // --- First the CPV box |
| 724 | zc = -(spsw3[2] + sfe[2] + spb[2] + spsw3[2]) + spsw3[2]; |
| cfce8870 |
725 | gMC->Gspos("DV12", 1, "DM12", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
726 | // --- Then iron support plate |
| 727 | zc = zc + sfe[2] + spsw3[2]; |
| cfce8870 |
728 | gMC->Gspos("DPFE", 1, "DM12", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
729 | // --- Then lead converter plate |
| 730 | zc = zc + sfe[2] + spb[2]; |
| cfce8870 |
731 | gMC->Gspos("DPPB", 1, "DM12", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
732 | // --- Lastly the preshower box |
| 733 | zc = zc + spb[2] + spsw3[2]; |
| cfce8870 |
734 | gMC->Gspos("DW12", 1, "DM12", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
735 | |
| 736 | |
| 737 | // **** MODULE TYPE 4 |
| 738 | |
| 739 | // --- place gas box (as CPV), iron support, lead converter and gas box |
| 740 | // --- (preshower) in the module |
| 741 | xc = 0.; |
| 742 | yc = 0.; |
| 743 | // --- First the CPV box |
| 744 | zc = -(spsw4[2] + sfe[2] + spb[2] + spsw4[2]) + spsw4[2]; |
| cfce8870 |
745 | gMC->Gspos("DV13", 1, "DM13", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
746 | // --- Then iron support plate |
| 747 | zc = zc + sfe[2] + spsw4[2]; |
| cfce8870 |
748 | gMC->Gspos("DPFE", 1, "DM13", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
749 | // --- Then lead converter plate |
| 750 | zc = zc + sfe[2] + spb[2]; |
| cfce8870 |
751 | gMC->Gspos("DPPB", 1, "DM13", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
752 | // --- Lastly the preshower box |
| 753 | zc = zc + spb[2] + spsw4[2]; |
| cfce8870 |
754 | gMC->Gspos("DW13", 1, "DM13", xc, yc, zc, 0, "ONLY"); |
| 6edc06da |
755 | |
| 756 | } |
| 757 | |
| 758 | //_____________________________________________________________________________ |
| 759 | void AliPMDv2::DrawModule() |
| 760 | { |
| 761 | // |
| 762 | // Draw a shaded view of the Photon Multiplicity Detector |
| 763 | // |
| 764 | |
| cfce8870 |
765 | gMC->Gsatt("*", "seen", -1); |
| 766 | gMC->Gsatt("alic", "seen", 0); |
| 6edc06da |
767 | // |
| 768 | // Set the visibility of the components |
| 769 | // |
| cfce8870 |
770 | gMC->Gsatt("DP21","seen",0); |
| 771 | gMC->Gsatt("DP22","seen",0); |
| 772 | gMC->Gsatt("DS21","seen",1); |
| 773 | gMC->Gsatt("DS22","seen",1); |
| 774 | gMC->Gsatt("DW21","seen",0); |
| 775 | gMC->Gsatt("DV21","seen",0); |
| 776 | gMC->Gsatt("DP11","seen",0); |
| 777 | gMC->Gsatt("DP12","seen",0); |
| 778 | gMC->Gsatt("DS11","seen",1); |
| 779 | gMC->Gsatt("DS12","seen",1); |
| 780 | gMC->Gsatt("DW11","seen",0); |
| 781 | gMC->Gsatt("DV11","seen",0); |
| 782 | gMC->Gsatt("DP13","seen",0); |
| 783 | gMC->Gsatt("DP14","seen",0); |
| 784 | gMC->Gsatt("DS13","seen",1); |
| 785 | gMC->Gsatt("DS14","seen",1); |
| 786 | gMC->Gsatt("DW12","seen",0); |
| 787 | gMC->Gsatt("DV12","seen",0); |
| 788 | gMC->Gsatt("DP15","seen",0); |
| 789 | gMC->Gsatt("DP16","seen",0); |
| 790 | gMC->Gsatt("DS15","seen",1); |
| 791 | gMC->Gsatt("DS16","seen",1); |
| 792 | gMC->Gsatt("DW13","seen",0); |
| 793 | gMC->Gsatt("DV13","seen",0); |
| 794 | gMC->Gsatt("DPPB","seen",1); |
| 795 | gMC->Gsatt("DPW ","seen",1); |
| 796 | gMC->Gsatt("DPFE","seen",1); |
| 797 | gMC->Gsatt("DM21","seen",1); |
| 798 | gMC->Gsatt("DM11","seen",1); |
| 799 | gMC->Gsatt("DM12","seen",1); |
| 800 | gMC->Gsatt("DM13","seen",1); |
| 801 | gMC->Gsatt("DPMD","seen",0); |
| 802 | gMC->Gsatt("DIQU","seen",0); |
| 6edc06da |
803 | // |
| cfce8870 |
804 | gMC->Gdopt("hide", "on"); |
| 805 | gMC->Gdopt("shad", "on"); |
| 806 | gMC->Gsatt("*", "fill", 7); |
| 807 | gMC->SetClipBox("."); |
| 808 | gMC->SetClipBox("*", 0, 3000, -3000, 3000, -6000, 6000); |
| 809 | gMC->DefaultRange(); |
| 810 | gMC->Gdraw("alic", 40, 30, 0, 22, 15.5, .04, .04); |
| 811 | gMC->Gdhead(1111, "Photon Multiplicity Detector Version 1"); |
| 812 | gMC->Gdman(17, 5, "MAN"); |
| 813 | gMC->Gdopt("hide", "off"); |
| 6edc06da |
814 | } |
| 815 | |
| 816 | //_____________________________________________________________________________ |
| 817 | void AliPMDv2::CreateMaterials() |
| 818 | { |
| 819 | // |
| 820 | // Create materials for the PMD version 1 |
| 821 | // |
| 822 | // ORIGIN : Y. P. VIYOGI |
| 823 | // |
| 824 | |
| 6edc06da |
825 | // --- The Argon- CO2 mixture --- |
| 826 | Float_t ag[2] = { 39.95 }; |
| 827 | Float_t zg[2] = { 18. }; |
| 828 | Float_t wg[2] = { .8,.2 }; |
| 829 | Float_t dar = .001782; // --- Ar density in g/cm3 --- |
| 830 | // --- CO2 --- |
| 831 | Float_t ac[2] = { 12.,16. }; |
| 832 | Float_t zc[2] = { 6.,8. }; |
| 833 | Float_t wc[2] = { 1.,2. }; |
| 834 | Float_t dc = .001977; |
| 835 | Float_t dco = .002; // --- CO2 density in g/cm3 --- |
| 836 | |
| 837 | Float_t absl, radl, a, d, z; |
| 838 | Float_t dg; |
| 839 | Float_t x0ar; |
| 840 | Float_t buf[1]; |
| 841 | Int_t nbuf; |
| 842 | |
| ad51aeb0 |
843 | Int_t *idtmed = fIdtmed->GetArray()-599; |
| 6edc06da |
844 | Int_t isxfld = gAlice->Field()->Integ(); |
| 845 | Float_t sxmgmx = gAlice->Field()->Max(); |
| 846 | |
| 847 | // --- Define the various materials for GEANT --- |
| 848 | AliMaterial(1, "Pb $", 207.19, 82., 11.35, .56, 18.5); |
| 849 | x0ar = 19.55 / dar; |
| 850 | AliMaterial(2, "Argon$", 39.95, 18., dar, x0ar, 6.5e4); |
| 851 | AliMixture(3, "CO2 $", ac, zc, dc, -2, wc); |
| 852 | AliMaterial(4, "Al $", 26.98, 13., 2.7, 8.9, 18.5); |
| 853 | AliMaterial(6, "Fe $", 55.85, 26., 7.87, 1.76, 18.5); |
| 854 | AliMaterial(7, "W $", 183.85, 74., 19.3, .35, 10.3); |
| 855 | AliMaterial(8, "G10 $", 20., 10., 1.7, 19.4, 999); |
| 856 | AliMaterial(9, "SILIC$", 28.09, 14., 2.33, 9.36, 45.); |
| 857 | AliMaterial(10, "Be $", 9.01, 4., 1.848, 35.3, 36.7); |
| 858 | AliMaterial(15, "Cu $", 63.54, 29., 8.96, 1.43, 15.); |
| 859 | AliMaterial(16, "C $", 12.01, 6., 2.265, 18.8, 49.9); |
| 860 | |
| 861 | AliMaterial(96, "MYLAR$", 8.73, 4.55, 1.39, 28.7, 62.); |
| 862 | AliMaterial(97, "CONCR$", 20., 10., 2.5, 10.7, 40.); |
| 863 | AliMaterial(98, "Vacum$", 1e-9, 1e-9, 1e-9, 1e16, 1e16); |
| 864 | AliMaterial(99, "Air $", 14.61, 7.3, .0012, 30420., 67500.); |
| 865 | |
| 866 | // define gas-mixtures |
| 867 | |
| 868 | char namate[21]; |
| cfce8870 |
869 | gMC->Gfmate((*fIdmate)[3], namate, a, z, d, radl, absl, buf, nbuf); |
| 6edc06da |
870 | ag[1] = a; |
| 871 | zg[1] = z; |
| 872 | dg = (dar * 4 + dco) / 5; |
| 873 | AliMixture(5, "ArCO2$", ag, zg, dg, 2, wg); |
| 874 | |
| 875 | // Define tracking media |
| ad51aeb0 |
876 | AliMedium(1, "Pb conv.$", 1, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); |
| 877 | AliMedium(7, "W conv.$", 7, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); |
| 878 | AliMedium(8, "G10plate$", 8, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); |
| 879 | AliMedium(4, "Al $", 4, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); |
| 880 | AliMedium(6, "Fe $", 6, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); |
| 881 | AliMedium(5, "ArCO2 $", 5, 1, 0, isxfld, sxmgmx, .1, .1, .1, .1); |
| 882 | AliMedium(9, "SILICON $", 9, 1, 0, isxfld, sxmgmx, .1, .1, .1, .1); |
| 883 | AliMedium(10, "Be $", 10, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); |
| 884 | AliMedium(98, "Vacuum $", 98, 0, 0, isxfld, sxmgmx, 1., .1, .1, 10); |
| 885 | AliMedium(99, "Air gaps$", 99, 0, 0, isxfld, sxmgmx, 1., .1, .1, .1); |
| 886 | AliMedium(15, "Cu $", 15, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); |
| 887 | AliMedium(16, "C $", 16, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); |
| 6edc06da |
888 | |
| 889 | // --- Generate explicitly delta rays in the iron, aluminium and lead --- |
| cfce8870 |
890 | gMC->Gstpar(idtmed[600], "LOSS", 3.); |
| 891 | gMC->Gstpar(idtmed[600], "DRAY", 1.); |
| 6edc06da |
892 | |
| cfce8870 |
893 | gMC->Gstpar(idtmed[603], "LOSS", 3.); |
| 894 | gMC->Gstpar(idtmed[603], "DRAY", 1.); |
| 6edc06da |
895 | |
| cfce8870 |
896 | gMC->Gstpar(idtmed[604], "LOSS", 3.); |
| 897 | gMC->Gstpar(idtmed[604], "DRAY", 1.); |
| 6edc06da |
898 | |
| cfce8870 |
899 | gMC->Gstpar(idtmed[605], "LOSS", 3.); |
| 900 | gMC->Gstpar(idtmed[605], "DRAY", 1.); |
| 6edc06da |
901 | |
| cfce8870 |
902 | gMC->Gstpar(idtmed[606], "LOSS", 3.); |
| 903 | gMC->Gstpar(idtmed[606], "DRAY", 1.); |
| 6edc06da |
904 | |
| cfce8870 |
905 | gMC->Gstpar(idtmed[607], "LOSS", 3.); |
| 906 | gMC->Gstpar(idtmed[607], "DRAY", 1.); |
| 6edc06da |
907 | |
| 908 | // --- Energy cut-offs in the Pb and Al to gain time in tracking --- |
| 909 | // --- without affecting the hit patterns --- |
| cfce8870 |
910 | gMC->Gstpar(idtmed[600], "CUTGAM", 1e-4); |
| 911 | gMC->Gstpar(idtmed[600], "CUTELE", 1e-4); |
| 912 | gMC->Gstpar(idtmed[600], "CUTNEU", 1e-4); |
| 913 | gMC->Gstpar(idtmed[600], "CUTHAD", 1e-4); |
| 914 | gMC->Gstpar(idtmed[605], "CUTGAM", 1e-4); |
| 915 | gMC->Gstpar(idtmed[605], "CUTELE", 1e-4); |
| 916 | gMC->Gstpar(idtmed[605], "CUTNEU", 1e-4); |
| 917 | gMC->Gstpar(idtmed[605], "CUTHAD", 1e-4); |
| 918 | gMC->Gstpar(idtmed[606], "CUTGAM", 1e-4); |
| 919 | gMC->Gstpar(idtmed[606], "CUTELE", 1e-4); |
| 920 | gMC->Gstpar(idtmed[606], "CUTNEU", 1e-4); |
| 921 | gMC->Gstpar(idtmed[606], "CUTHAD", 1e-4); |
| 922 | gMC->Gstpar(idtmed[603], "CUTGAM", 1e-4); |
| 923 | gMC->Gstpar(idtmed[603], "CUTELE", 1e-4); |
| 924 | gMC->Gstpar(idtmed[603], "CUTNEU", 1e-4); |
| 925 | gMC->Gstpar(idtmed[603], "CUTHAD", 1e-4); |
| 926 | gMC->Gstpar(idtmed[609], "CUTGAM", 1e-4); |
| 927 | gMC->Gstpar(idtmed[609], "CUTELE", 1e-4); |
| 928 | gMC->Gstpar(idtmed[609], "CUTNEU", 1e-4); |
| 929 | gMC->Gstpar(idtmed[609], "CUTHAD", 1e-4); |
| 6edc06da |
930 | |
| 931 | // --- Prevent particles stopping in the gas due to energy cut-off --- |
| cfce8870 |
932 | gMC->Gstpar(idtmed[604], "CUTGAM", 1e-5); |
| 933 | gMC->Gstpar(idtmed[604], "CUTELE", 1e-5); |
| 934 | gMC->Gstpar(idtmed[604], "CUTNEU", 1e-5); |
| 935 | gMC->Gstpar(idtmed[604], "CUTHAD", 1e-5); |
| 936 | gMC->Gstpar(idtmed[604], "CUTMUO", 1e-5); |
| 6edc06da |
937 | } |
| 938 | |
| 939 | //_____________________________________________________________________________ |
| 940 | void AliPMDv2::Init() |
| 941 | { |
| 942 | // |
| 943 | // Initialises PMD detector after it has been built |
| 944 | // |
| 945 | Int_t i; |
| 946 | kdet=1; |
| 947 | // |
| 948 | printf("\n"); |
| 949 | for(i=0;i<35;i++) printf("*"); |
| 950 | printf(" PMD_INIT "); |
| 951 | for(i=0;i<35;i++) printf("*"); |
| 952 | printf("\n"); |
| 953 | printf(" PMD simulation package initialised\n"); |
| 954 | printf(" parameters of pmd\n"); |
| 955 | printf("%6d %10.2f %10.2f %10.2f %10.2f %10.2f\n",kdet,thmin,thmax,zdist,thlow,thhigh); |
| 956 | // |
| 957 | for(i=0;i<80;i++) printf("*"); |
| 958 | printf("\n"); |
| 959 | // |
| ad51aeb0 |
960 | Int_t *idtmed = fIdtmed->GetArray()-599; |
| 6edc06da |
961 | fMedSens=idtmed[605-1]; |
| 962 | } |
| 963 | |
| 964 | //_____________________________________________________________________________ |
| 965 | void AliPMDv2::StepManager() |
| 966 | { |
| 967 | // |
| 968 | // Called at each step in the PMD |
| 969 | // |
| 970 | Int_t copy; |
| 971 | Float_t hits[4], destep; |
| 972 | Float_t center[3] = {0,0,0}; |
| 973 | Int_t vol[5]; |
| 0a6d8768 |
974 | const char *namep; |
| 6edc06da |
975 | |
| cfce8870 |
976 | if(gMC->GetMedium() == fMedSens && (destep = gMC->Edep())) { |
| 6edc06da |
977 | |
| 0a6d8768 |
978 | gMC->CurrentVolID(copy); |
| 6edc06da |
979 | vol[0]=copy; |
| 0a6d8768 |
980 | gMC->CurrentVolOffID(1,copy); |
| 6edc06da |
981 | vol[1]=copy; |
| 0a6d8768 |
982 | gMC->CurrentVolOffID(2,copy); |
| 983 | namep=gMC->CurrentVolOffName(2); |
| 6edc06da |
984 | vol[2]=copy; |
| 985 | if(strncmp(namep,"DW11",4))vol[2]=1; |
| 986 | if(strncmp(namep,"DV11",4))vol[2]=2; |
| 0a6d8768 |
987 | gMC->CurrentVolOffID(3,copy); |
| 6edc06da |
988 | vol[3]=copy; |
| 0a6d8768 |
989 | gMC->CurrentVolOffID(4,copy); |
| 6edc06da |
990 | vol[4]=copy; |
| cfce8870 |
991 | gMC->Gdtom(center,hits,1); |
| 6edc06da |
992 | hits[3] = destep*1e9; //Number in eV |
| 993 | AddHit(gAlice->CurrentTrack(), vol, hits); |
| 994 | } |
| 995 | } |
git://git.uio.no / u / mrichter / AliRoot.git / blame