[u/mrichter/AliRoot.git] / README_CMake


Note: The CMake build of AliRoot builds out-of-source

Steps to Build AliRoot with CMake :

1. Check out Aliroot source into a folder (usually specified by the environment variable ALICE)
	
	cd $ALICE
	svn co https://alisoft.cern.ch/AliRoot/trunk AliRoot

Note: Please use https:// if you want to be able to commit changes to the SVN repository.

2. Set the environment variable ALICE_ROOT to point to the source you have checked out

       cd AliRoot
       export ALICE_ROOT=`pwd`


3. Create a new folder where the build will take place. It must be different from the source directory!
	
	cd ..
	mkdir objdir
	cd objdir

4. Optionally specify the place for installation using the environment variable ALICE_INSTALL.
It you do not specify it, "make install" will put lib, bin and include in ALICE_ROOT

5. Optionally specify the location of Geant3 using the environment variable GEANT3DIR

6. Execute the following commands to configure the build

	cmake $ALICE_ROOT

Note: Some files CMakeLists.txt will be created in the source tree, so you need write access there. This 
is a temporary situation that will change soon.

7. Build and install AliRoot. Note that the parralel build is fully operational with CMake.

   	 make -j4
	 make install

If you make changes in the source tree, it is enough to do

       	 make
	 make install

to get them in use.

9. In order to build addtional targets like THydjet and SHUTTLE add the following options to the cmake command

	cmake -DTHydjet=ON -DSHUTTLE=ON <path_to_source>

10. Static libraries can be built using

	make alilibs-static

11. Individual Modules can be built using

	make <Module>-all
	make <Module>-all-static 

eg.	make STEER-all STEER-all-static

12. Individual Packages can be built using

	make <Package>
	make <Package>-static

eg.	make STEERbase STEERbase-static

13. The code can be checked for the ALICE coding conventions on a package, module or class level using the following targets. 

  make check-all
  make <Module>-check-all
  make <Package>-check
  make <Module>-<ClassName>-check  // To use this run cmake with -DCLASSCHECK="YES" option. It is turned off by default since it bloats the Makefile and slows down the internal makefile rule checking

  The resulting violations will be written to the folder <Build_Directory>/<Module>/check/viols

14. To Build PARs the following targets can be used. The resulting packages will be created in the cmake build directory

  make par-all 
  make <Package>.par
  make <Module>-par-all   //build all par packages in the module

15. To test PARs after building run

  make test-par-all
  make test-<Package>
  make test-<Module>-par-all

!IMPORTANT! - Make sure your source folder is clean. If you used the old make system to build aliroot run make clean in the source directory before you run cmake
Commit	Line	Data
45526b5e	1
	2	Note: The CMake build of AliRoot builds out-of-source
	3
529dfa42	4	Steps to Build AliRoot with CMake :
dfa85384	5
8b0f7d96	6	1. Check out Aliroot source into a folder (usually specified by the environment variable ALICE)
45526b5e	7
8b0f7d96	8	cd $ALICE
11f822d1	9	svn co https://alisoft.cern.ch/AliRoot/trunk AliRoot
	10
	11	Note: Please use https:// if you want to be able to commit changes to the SVN repository.
529dfa42	12
8b0f7d96	13	2. Set the environment variable ALICE_ROOT to point to the source you have checked out
	14
	15	cd AliRoot
	16	export ALICE_ROOT=`pwd`
	17
	18
	19	3. Create a new folder where the build will take place. It must be different from the source directory!
45526b5e	20
8b0f7d96	21	cd ..
	22	mkdir objdir
	23	cd objdir
	24
	25	4. Optionally specify the place for installation using the environment variable ALICE_INSTALL.
	26	It you do not specify it, "make install" will put lib, bin and include in ALICE_ROOT
	27
	28	5. Optionally specify the location of Geant3 using the environment variable GEANT3DIR
	29
	30	6. Execute the following commands to configure the build
	31
	32	cmake $ALICE_ROOT
	33
	34	Note: Some files CMakeLists.txt will be created in the source tree, so you need write access there. This
	35	is a temporary situation that will change soon.
	36
	37	7. Build and install AliRoot. Note that the parralel build is fully operational with CMake.
	38
	39	make -j4
	40	make install
529dfa42	41
8b0f7d96	42	If you make changes in the source tree, it is enough to do
45526b5e	43
8b0f7d96	44	make
8b0f7d96	45	make install
529f129e	46
8b0f7d96	47	to get them in use.
529dfa42	48
8b0f7d96	49	9. In order to build addtional targets like THydjet and SHUTTLE add the following options to the cmake command
45526b5e	50
	51	cmake -DTHydjet=ON -DSHUTTLE=ON <path_to_source>
	52
8b0f7d96	53	10. Static libraries can be built using
529f129e	54
	55	make alilibs-static
	56
8b0f7d96	57	11. Individual Modules can be built using
529f129e	58
	59	make <Module>-all
	60	make <Module>-all-static
	61
	62	eg. make STEER-all STEER-all-static
	63
8b0f7d96	64	12. Individual Packages can be built using
529f129e	65
	66	make <Package>
	67	make <Package>-static
	68
	69	eg. make STEERbase STEERbase-static
529dfa42	70
8b0f7d96	71	13. The code can be checked for the ALICE coding conventions on a package, module or class level using the following targets.
c2a2c0b8	72
	73	make check-all
	74	make <Module>-check-all
	75	make <Package>-check
8948a174	76	make <Module>-<ClassName>-check // To use this run cmake with -DCLASSCHECK="YES" option. It is turned off by default since it bloats the Makefile and slows down the internal makefile rule checking
c2a2c0b8	77
811ffdcc	78	The resulting violations will be written to the folder <Build_Directory>/<Module>/check/viols
c2a2c0b8	79
8b0f7d96	80	14. To Build PARs the following targets can be used. The resulting packages will be created in the cmake build directory
6a9e2760	81
	82	make par-all
	83	make <Package>.par
8948a174	84	make <Module>-par-all //build all par packages in the module
3a8dbb31	85
8b0f7d96	86	15. To test PARs after building run
3a8dbb31	87
	88	make test-par-all
	89	make test-<Package>
	90	make test-<Module>-par-all
6a9e2760	91
45526b5e	92	!IMPORTANT! - Make sure your source folder is clean. If you used the old make system to build aliroot run make clean in the source directory before you run cmake
529dfa42	93
dfa85384	94