[u/mrichter/AliRoot.git] / RICH / AliRICHGeometry.h

#ifndef AliRICHGeometry_h
#define AliRICHGeometry_h


/* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
 * See cxx source for full Copyright notice                               */

/* $Id$ */

#include <Riostream.h>
#include <TObject.h>

class AliRICHGeometry :public TObject  
{
public:
// ctor & dtor staff      
   inline AliRICHGeometry(); // default ctor
// inline methods:          
   void    SetGapThickness(Float_t thickness)          {fGapThickness=thickness;}    // Radiator Thickness 
   Float_t GetGapThickness()                      const{return fGapThickness;}       // Radiator thickness

   void    SetProximityGapThickness(Float_t thickness) {fProximityGapThickness=thickness;}
   Float_t GetProximityGapThickness()             const{return fProximityGapThickness;}
    
   void    SetQuartzLength(Float_t length)             {fQuartzLength=length;}
   Float_t GetQuartzLength()                      const{return fQuartzLength;}
   
   void    SetQuartzWidth(Float_t width)               {fQuartzWidth=width;}
   Float_t GetQuartzWidth()                       const{return fQuartzWidth;}

   void    SetQuartzThickness(Float_t thickness)       {fQuartzThickness=thickness;}
   Float_t GetQuartzThickness()                   const{return fQuartzThickness;}
   
   void    SetOuterFreonLength(Float_t length)         {fOuterFreonLength=length;}
   Float_t GetOuterFreonLength()                  const{return fOuterFreonLength;}
   
   void    SetOuterFreonWidth(Float_t width)           {fOuterFreonWidth=width;}
   Float_t GetOuterFreonWidth()                   const{return fOuterFreonWidth;}
   
   void    SetInnerFreonLength(Float_t length)         {fInnerFreonLength=length;}
   Float_t GetInnerFreonLength()                  const{return fInnerFreonLength;}
   
   void    SetInnerFreonWidth(Float_t width)           {fInnerFreonWidth=width;}
   Float_t GetInnerFreonWidth()                   const{return fInnerFreonWidth;}
   
   void    SetFreonThickness(Float_t thickness)        {fFreonThickness=thickness;}
   Float_t GetFreonThickness()                    const{return fFreonThickness;}
   
   void    SetRadiatorToPads(Float_t distance)         {fRadiatorToPads=distance;}
   Float_t GetRadiatorToPads()                    const{return fRadiatorToPads;}   

   void    SetRotationAngle(Float_t rotAngle)          {fRotationAngle=rotAngle;}
   Float_t GetRotationAngle()                    const {return fRotationAngle;}
       
   void    SetAlphaAngle(Float_t alphaAngle)           {fAlphaAngle=alphaAngle;} // Angle between modules in YZ plane
   Float_t GetAlphaAngle()                       const {return fAlphaAngle;}     // Angle between modules in YZ plane
   
   void    SetBetaAngle(Float_t betaAngle)             {fBetaAngle=betaAngle;}   // Angle between modules in XY plane
   Float_t GetBetaAngle()                        const {return fBetaAngle;}      // Angle between modules in XY plane
   
   void    SetOffset(Float_t offset)                   {fOffset=offset;}         // Modules offset from IP
   Float_t GetOffset()                           const {return fOffset;}         // Modules offset from IP
   
   inline void Print(Option_t *option)const;
          
private:
   Float_t fGapThickness;            // Gap Thickness
   Float_t fProximityGapThickness;   // Proximity Gap Thickness
   Float_t fQuartzLength;            // Quartz Length
   Float_t fQuartzWidth;             // Quartz Width
   Float_t fQuartzThickness;         // Quartz Thickness
   Float_t fOuterFreonLength;        // Outer Freon Length
   Float_t fOuterFreonWidth;         // Outer Freon Width
   Float_t fInnerFreonLength;        // Inner Freon Length
   Float_t fInnerFreonWidth;         // Inner Freon Width
   Float_t fFreonThickness;          // Freon Thickness
   Float_t fRadiatorToPads;          // Distance from radiator to pads
   Float_t fRotationAngle;           // Azimuthal rotation angle in X-Y plane  
   Float_t fAlphaAngle;              // Angle between modules in YZ plane
   Float_t fBetaAngle;               // Angle between modules in XY plane
   Float_t fOffset;                  // Modules offset from IP 
   ClassDef(AliRICHGeometry,3)       // Chamber's main geometry parameters
};

inline AliRICHGeometry::AliRICHGeometry()
      	               :TObject()
{
// Define the default values:
      
   SetGapThickness         (8);     // Gap Thickness
   SetProximityGapThickness(0.4);   // Proximity Gap Thickness
   SetQuartzLength         (133);   // Quartz Length
   SetQuartzWidth          (127.9); // Quartz Width
   SetQuartzThickness      (0.5);   // Quartz Thickness
   SetOuterFreonLength     (133);   // Outer Freon Length
   SetOuterFreonWidth      (41.3);  // Outer Freon Width
   SetInnerFreonLength     (133);   // Inner Freon Length
   SetInnerFreonWidth      (41.3);  // Inner Freon Width
   SetFreonThickness       (1.5);   // Freon Thickness
   SetRadiatorToPads       (0);     // Distance from radiator to pads
   SetRotationAngle        (60);    // Azimuthal rotation angle in X-Y plane
   SetAlphaAngle           (19.5);  // Angle between modules in YZ plane
   SetBetaAngle            (20);    // Angle vetween modules in XY plane     
   SetOffset               (490+1.267); // ???1.267??? Modules offset from IP 
}//AliRICHGeometry::ctor()

inline void AliRICHGeometry::Print(Option_t *option)const
{
   TObject::Print(option);
   cout<<"Radiator Gap thickness:  "<<GetGapThickness()          <<endl;
   cout<<"Proximity Gap thickness: "<<GetProximityGapThickness() <<endl;
   cout<<"Quartz window length:    "<<GetQuartzLength()          <<endl;
   cout<<"Quartz window width:     "<<GetQuartzWidth()           <<endl;
   cout<<"Quartz window thickness: "<<GetQuartzThickness()       <<endl;
   cout<<"Outer freon length:      "<<GetOuterFreonLength()      <<endl;
   cout<<"Outer freon width:       "<<GetOuterFreonWidth()       <<endl;
   cout<<"Inner freon length:      "<<GetInnerFreonLength()      <<endl;
   cout<<"Inner freon width:       "<<GetInnerFreonWidth()       <<endl;
   cout<<"Freon thickness:         "<<GetFreonThickness()        <<endl;
   cout<<"RadiatorToPads:          "<<GetRadiatorToPads()        <<endl;
   cout<<"Rotation angle:          "<<GetRotationAngle()         <<endl;
   cout<<"Alpha Angle:             "<<GetAlphaAngle()            <<endl;
   cout<<"Beta angle:              "<<GetBetaAngle()             <<endl;
   cout<<"Modules offset from IP:  "<<GetOffset()                <<endl;
}//void AliRICHGeometry::Print()

//______________________________________________________
// Definition and manipulation with parameters describing RICH parametrised geometry.

#endif //AliRICHGeometry_h
Commit	Line	Data
d3382349	1	#ifndef AliRICHGeometry_h
d3382349	2	#define AliRICHGeometry_h
237c933d	3
	4
	5	/* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
	6	* See cxx source for full Copyright notice */
	7
	8	/* $Id$ */
	9
7118aef0	10	#include <Riostream.h>
237c933d	11	#include <TObject.h>
237c933d	12
d3382349	13	class AliRICHGeometry :public TObject
897796c0	14	{
9fb716cd	15	public:
9fb716cd	16	// ctor & dtor staff
d3382349	17	inline AliRICHGeometry(); // default ctor
9fb716cd	18	// inline methods:
d3382349	19	void SetGapThickness(Float_t thickness) {fGapThickness=thickness;} // Radiator Thickness
	20	Float_t GetGapThickness() const{return fGapThickness;} // Radiator thickness
	21
	22	void SetProximityGapThickness(Float_t thickness) {fProximityGapThickness=thickness;}
	23	Float_t GetProximityGapThickness() const{return fProximityGapThickness;}
897796c0	24
d3382349	25	void SetQuartzLength(Float_t length) {fQuartzLength=length;}
	26	Float_t GetQuartzLength() const{return fQuartzLength;}
	27
	28	void SetQuartzWidth(Float_t width) {fQuartzWidth=width;}
	29	Float_t GetQuartzWidth() const{return fQuartzWidth;}
237c933d	30
d3382349	31	void SetQuartzThickness(Float_t thickness) {fQuartzThickness=thickness;}
	32	Float_t GetQuartzThickness() const{return fQuartzThickness;}
	33
	34	void SetOuterFreonLength(Float_t length) {fOuterFreonLength=length;}
	35	Float_t GetOuterFreonLength() const{return fOuterFreonLength;}
	36
	37	void SetOuterFreonWidth(Float_t width) {fOuterFreonWidth=width;}
	38	Float_t GetOuterFreonWidth() const{return fOuterFreonWidth;}
	39
	40	void SetInnerFreonLength(Float_t length) {fInnerFreonLength=length;}
	41	Float_t GetInnerFreonLength() const{return fInnerFreonLength;}
	42
	43	void SetInnerFreonWidth(Float_t width) {fInnerFreonWidth=width;}
	44	Float_t GetInnerFreonWidth() const{return fInnerFreonWidth;}
	45
	46	void SetFreonThickness(Float_t thickness) {fFreonThickness=thickness;}
	47	Float_t GetFreonThickness() const{return fFreonThickness;}
	48
	49	void SetRadiatorToPads(Float_t distance) {fRadiatorToPads=distance;}
	50	Float_t GetRadiatorToPads() const{return fRadiatorToPads;}
237c933d	51
d3382349	52	void SetRotationAngle(Float_t rotAngle) {fRotationAngle=rotAngle;}
9fb716cd	53	Float_t GetRotationAngle() const {return fRotationAngle;}
	54
	55	void SetAlphaAngle(Float_t alphaAngle) {fAlphaAngle=alphaAngle;} // Angle between modules in YZ plane
	56	Float_t GetAlphaAngle() const {return fAlphaAngle;} // Angle between modules in YZ plane
	57
	58	void SetBetaAngle(Float_t betaAngle) {fBetaAngle=betaAngle;} // Angle between modules in XY plane
	59	Float_t GetBetaAngle() const {return fBetaAngle;} // Angle between modules in XY plane
	60
	61	void SetOffset(Float_t offset) {fOffset=offset;} // Modules offset from IP
	62	Float_t GetOffset() const {return fOffset;} // Modules offset from IP
	63
	64	inline void Print(Option_t *option)const;
d3382349	65
	66	private:
	67	Float_t fGapThickness; // Gap Thickness
	68	Float_t fProximityGapThickness; // Proximity Gap Thickness
	69	Float_t fQuartzLength; // Quartz Length
	70	Float_t fQuartzWidth; // Quartz Width
	71	Float_t fQuartzThickness; // Quartz Thickness
	72	Float_t fOuterFreonLength; // Outer Freon Length
	73	Float_t fOuterFreonWidth; // Outer Freon Width
	74	Float_t fInnerFreonLength; // Inner Freon Length
	75	Float_t fInnerFreonWidth; // Inner Freon Width
	76	Float_t fFreonThickness; // Freon Thickness
	77	Float_t fRadiatorToPads; // Distance from radiator to pads
	78	Float_t fRotationAngle; // Azimuthal rotation angle in X-Y plane
9fb716cd	79	Float_t fAlphaAngle; // Angle between modules in YZ plane
	80	Float_t fBetaAngle; // Angle between modules in XY plane
	81	Float_t fOffset; // Modules offset from IP
2b00434a	82	ClassDef(AliRICHGeometry,3) // Chamber's main geometry parameters
d3382349	83	};
	84
	85	inline AliRICHGeometry::AliRICHGeometry()
	86	:TObject()
	87	{
	88	// Define the default values:
	89
9fb716cd	90	SetGapThickness (8); // Gap Thickness
	91	SetProximityGapThickness(0.4); // Proximity Gap Thickness
	92	SetQuartzLength (133); // Quartz Length
	93	SetQuartzWidth (127.9); // Quartz Width
	94	SetQuartzThickness (0.5); // Quartz Thickness
	95	SetOuterFreonLength (133); // Outer Freon Length
	96	SetOuterFreonWidth (41.3); // Outer Freon Width
	97	SetInnerFreonLength (133); // Inner Freon Length
	98	SetInnerFreonWidth (41.3); // Inner Freon Width
	99	SetFreonThickness (1.5); // Freon Thickness
	100	SetRadiatorToPads (0); // Distance from radiator to pads
e62e4625	101	SetRotationAngle (60); // Azimuthal rotation angle in X-Y plane
9fb716cd	102	SetAlphaAngle (19.5); // Angle between modules in YZ plane
	103	SetBetaAngle (20); // Angle vetween modules in XY plane
	104	SetOffset (490+1.267); // ???1.267??? Modules offset from IP
d3382349	105	}//AliRICHGeometry::ctor()
237c933d	106
9fb716cd	107	inline void AliRICHGeometry::Print(Option_t *option)const
d3382349	108	{
cc23c5c6	109	TObject::Print(option);
9fb716cd	110	cout<<"Radiator Gap thickness: "<<GetGapThickness() <<endl;
	111	cout<<"Proximity Gap thickness: "<<GetProximityGapThickness() <<endl;
	112	cout<<"Quartz window length: "<<GetQuartzLength() <<endl;
	113	cout<<"Quartz window width: "<<GetQuartzWidth() <<endl;
	114	cout<<"Quartz window thickness: "<<GetQuartzThickness() <<endl;
	115	cout<<"Outer freon length: "<<GetOuterFreonLength() <<endl;
	116	cout<<"Outer freon width: "<<GetOuterFreonWidth() <<endl;
	117	cout<<"Inner freon length: "<<GetInnerFreonLength() <<endl;
	118	cout<<"Inner freon width: "<<GetInnerFreonWidth() <<endl;
	119	cout<<"Freon thickness: "<<GetFreonThickness() <<endl;
	120	cout<<"RadiatorToPads: "<<GetRadiatorToPads() <<endl;
	121	cout<<"Rotation angle: "<<GetRotationAngle() <<endl;
	122	cout<<"Alpha Angle: "<<GetAlphaAngle() <<endl;
	123	cout<<"Beta angle: "<<GetBetaAngle() <<endl;
	124	cout<<"Modules offset from IP: "<<GetOffset() <<endl;
d3382349	125	}//void AliRICHGeometry::Print()
237c933d	126
9fb716cd	127	//______________________________________________________
	128	// Definition and manipulation with parameters describing RICH parametrised geometry.
	129
d3382349	130	#endif //AliRICHGeometry_h