[u/mrichter/AliRoot.git] / STRUCT / AliALIFE.cxx

/**************************************************************************
 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
 *                                                                        *
 * Author: The ALICE Off-line Project.                                    *
 * Contributors are mentioned in the code where appropriate.              *
 *                                                                        *
 * Permission to use, copy, modify and distribute this software and its   *
 * documentation strictly for non-commercial purposes is hereby granted   *
 * without fee, provided that the above copyright notice appears in all   *
 * copies and that both the copyright notice and this permission notice   *
 * appear in the supporting documentation. The authors make no claims     *
 * about the suitability of this software for any purpose. It is          *
 * provided "as is" without express or implied warranty.                  *
 **************************************************************************/

/* $Id$ */

//----------------------------------------------------------------------
// Helper class to write geometry in ALIFE format
// in parallel with Geant geometry definition.
// Author: A.Morsch
//----------------------------------------------------------------------

#include <AliALIFE.h>

ClassImp(AliALIFE)


AliALIFE::AliALIFE(const char* file1, const char* file2)
{  
// Constructor
    fNBodies = 0; 
    fNVolumes= 0; 
    fBodyFile   = file1;   // File for Fluka bodies
    fVolumeFile = file2;
    fFile1=fopen(fBodyFile,"w");
    fFile2=fopen(fVolumeFile,"w");
    BodyHeader();
    VolumeHeader();
    fDefaultVolume1 = "DEFAU1";
    fDefaultVolume2 = "DEFAU2";    
}

AliALIFE::AliALIFE()
{
// Default constructor
    fBodyFile   = "FlukaBody.inp";  
    fVolumeFile = "FlukaVolume.inp";
    fFile1=fopen(fBodyFile,"w");
    fFile2=fopen(fVolumeFile,"w");
    BodyHeader();
    VolumeHeader();
}

void AliALIFE::BodyHeader()
{
// Write header for body definitions
    fprintf(fFile1,"*\n");        
    fprintf(fFile1,"GEOBEGIN                                                              COMBINAT\n");
    fprintf(fFile1,"    0    0         AliRoot Generated\n");
    fprintf(fFile1,"*\n");
    fprintf(fFile1,"*== Body Definitions ================================================\n");
    fprintf(fFile1,"*\n");
                            
}


void AliALIFE::VolumeHeader()
{
// Write header for region (volume)  definitions
    fprintf(fFile2,"REGIONS\n");
    fprintf(fFile2,"*\n");
    fprintf(fFile2,"*== Region Definitions =================================================\n");
    fprintf(fFile2,"*\n");
}


void AliALIFE:: Cylinder(Float_t rmin, Float_t rmax, 
			 Float_t zmin, Float_t zmax, 
			 Float_t pos[3], 
			 char* Material, char* Field, char* Cuts) 
{
// Simple cylinder
//
// Bodies
// ^^^^^^
    char name1[5], name2[5], name3[5], name4[5];

//  outer radius
    sprintf(name1, "R%4.4d", fNBodies++);
    fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",name1, pos[0], pos[1], rmax); // inner radius
    sprintf(name2, "R%4.4d", fNBodies++);
    fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",name2, pos[0], pos[1], rmin); 
// z-max
    sprintf(name3, "Z%4.4d", fNBodies++);
    fprintf(fFile1,"%5s XYP%10.3f\n",name3, zmax); 
// z-min
    sprintf(name4, "Z%4.4d", fNBodies++);
    fprintf(fFile1,"%5s XYP%10.3f\n",name4, zmin); 
//
// Volumes
// ^^^^^^^

    fprintf(fFile2,">%s:%s\n", Material, Field);
    fprintf(fFile2,"EMFCUT=%s\n", Cuts);
    fprintf(fFile2,"WW-FACTOR=%s\n", Cuts);
    if (rmin >0) {
	fprintf(fFile2,"+%s-%s+%s-%s\n", name1, name2, name3, name4);
    } else {
	fprintf(fFile2,"+%s+%s-%s\n", name1, name3, name4);
    }
    
    fprintf(fFile2,"\n");    
}

void AliALIFE::OnionCylinder(Float_t* r, Int_t nr, Float_t zmin, Float_t zmax,
			     Float_t pos[3], char** Materials, 
			     char** Fields, char** Cuts) 
{
//
// Concentric cylinders
//

// Bodies
// ^^^^^^
    char nameRin[6], nameRou[6], nameZin[6], nameZou[6];
// z-limits
// z-max
    sprintf(nameZou, "Z%4.4d", fNBodies++);
    nameZou[5]='\0';
    
    fprintf(fFile1,"%5s XYP%10.3f\n",nameZou, zmax); 
// z-min
    sprintf(nameZin, "Z%4.4d", fNBodies++);
    nameZin[5]='\0';
    fprintf(fFile1,"%5s XYP%10.3f\n",nameZin, zmin); 

// inner radius
    sprintf(nameRin, "R%4.4d", fNBodies++);
    nameRin[5]='\0';
    fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",nameRin, pos[0], pos[1], r[0]); 

    Int_t i;
    for (i=1; i<nr; i++) {
//  outer radius
	sprintf(nameRou, "R%4.4d", fNBodies++);
	nameRou[5]='\0';
	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
		nameRou, pos[0], pos[1], r[i]); 	
//
// Volumes
// ^^^^^^^
	if (Fields && Cuts) {
	    fprintf(fFile2,">%s:%s\n", Materials[i-1], Fields[i-1]);
	    fprintf(fFile2,"EMFCUT=%s\n", Cuts[i-1]);
	    fprintf(fFile2,"WW-FACTOR=%s\n", Cuts[i-1]);
	} else {
	    fprintf(fFile2,">%s:%s\n", Materials[i-1], "MF");
	    fprintf(fFile2,"EMFCUT=%s\n", "$UNSHIELDED");
	    fprintf(fFile2,"WW-FACTOR=%s\n", "$UNSHIELDED");
	}
	if (r[i-1] != 0.) {
	    fprintf(fFile2,"+%5s-%5s+%5s-%5s\n", nameZou, nameZin, nameRou, nameRin);
	} else {
	    fprintf(fFile2,"+%5s-%5s+%5s\n", nameZou, nameZin, nameRou);
	}
	fprintf(fFile2,"\n");
	strcpy(nameRin,nameRou);
    }
}


void AliALIFE::Cone(Float_t rmin1, Float_t rmin2, 
		     Float_t rmax1, Float_t rmax2,
		     Float_t zmin, Float_t zmax, 
		     Float_t pos[3], 
		     char* Material, char* Field, char* Cuts) 
{
// Simple cone 

//
// Bodies
// ^^^^^^
    char nameCou[6], nameCin[6];
    Float_t d, r1, r2;
    char nameZin[6], nameZou[6];
// z-max
    sprintf(nameZou, "Z%4.4d", fNBodies++);
    fprintf(fFile1,"%5s XYP%10.3f\n",nameZou, zmax); 
// z-min
    sprintf(nameZin, "Z%4.4d", fNBodies++);
    fprintf(fFile1,"%5s XYP%10.3f\n",nameZin, zmin); 
    
//  outer radius
    d=zmax-zmin;
    sprintf(nameCou, "C%4.4d", fNBodies++);
    if (rmax1 >= 0. && rmax2 >= 0.) {
	if (rmax1!=rmax2) {
	    if (rmax1 > rmax2) {
		pos[2]=zmin;
		r1=rmax1;
		r2=rmax2;
	    } else {
		d=-d;
		pos[2]=zmax;
		r1=rmax2;
		r2=rmax1;
	    }
	    fprintf(fFile1,"%5s TRC%10.3f%10.3f%10.3f%10.3f%10.3f%10.3f\n",
		    nameCou, pos[0], pos[1], pos[2], 0., 0., d); 
	    fprintf(fFile1,"         %10.3f%10.3f\n",r1,r2);
	} else {
	    fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
		    nameCou, pos[0], pos[1], rmax1); 
	} 
    }else {
      fDefaultVolume1 = nameCou;
    }

    
// inner radius
    sprintf(nameCin, "C%4.4d", fNBodies++);
    if (rmin1 >= 0. && rmin2 >= 0.) {
	if (rmin1!=rmin2) {
	    if (rmin1 != 0 && rmin2 !=0) {
		d=zmax-zmin;
		if (rmin1 > rmin2) {
		    pos[2]=zmin;
		    r1=rmin1;
		    r2=rmin2;
		} else {
		    pos[2]=zmax;
		    r1=rmin2;
		    r2=rmin1;
		    d=-d;
		}
		fprintf(fFile1,"%5s TRC%10.3f%10.3f%10.3f%10.3f%10.3f%10.3f\n",
			nameCin, pos[0], pos[1], pos[2], 0., 0., d); 
		fprintf(fFile1,"         %10.3f%10.3f\n",r1,r2);
	    } 
	} else {
	    fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
		    nameCin, pos[0], pos[1], rmin1); 
	} 
    }else {
      fDefaultVolume2 = nameCin;
    }


//
// Volumes
// ^^^^^^^
    fprintf(fFile2,">%s:%s\n", Material, Field);
    fprintf(fFile2,"EMFCUT=%s\n", Cuts);
    fprintf(fFile2,"WW-FACTOR=%s\n", Cuts);
    if (rmin1 != 0 && rmin2 !=0) {
	fprintf(fFile2,"+%s-%s+%s-%s\n", nameCou, nameCin, nameZou, nameZin);
    } else {
	fprintf(fFile2,"+%s+%s-%s\n", nameCou, nameZou, nameZin);
    }
    fprintf(fFile2,"\n");        
}

void AliALIFE::OnionCone (Float_t* r1, Float_t* r2, Int_t nr, 
			  Float_t zmin, Float_t zmax,
			  Float_t pos[3], char** Materials, char** Fields,
			  char** Cuts) 
{
// Concentric cones
//
    char nameCin[6], nameCou[6], nameZin[6], nameZou[6];
//
// Bodies
// ^^^^^^
    Float_t ri1, ri2, ro1, ro2, d;

// z-max
    sprintf(nameZou, "Z%4.4d", fNBodies++);
    fprintf(fFile1,"%5s XYP%10.3f\n",nameZou, zmax); 
// z-min
    sprintf(nameZin, "Z%4.4d", fNBodies++);
    fprintf(fFile1,"%5s XYP%10.3f\n",nameZin, zmin); 
     
//  inner radius
    d=zmax-zmin;
    Bool_t hasInner=kFALSE;
    Bool_t isCylinder=kFALSE;
    if (r1[0]>=0 && r2[0]>=0) {
	if (r1[0] != 0. &&  r2[0] !=0.) {
	    if (r1[0]!=r2[0]) {
		hasInner=kTRUE;
		if (r1[0] > r2[0]) {
		    pos[2]=zmin;
		    ri1=r1[0];
		    ri2=r2[0];
		} else {
		    d=-d;
		    pos[2]=zmax;
		    ri1=r2[0];
		    ri2=r1[0];
		}
		sprintf(nameCin, "C%4.4d", fNBodies++);
		nameCin[5]='\0';
		fprintf(fFile1,"%5s TRC%10.3f%10.3f%10.3f%10.3f%10.3f%10.3f\n",
			nameCin, pos[0], pos[1], pos[2], 0., 0., d); 
		fprintf(fFile1,"         %10.3f%10.3f\n",ri1,ri2);
	    } else {
		isCylinder=kTRUE;
		sprintf(nameCin, "C%4.4d", fNBodies++);
		nameCin[5]='\0';
		fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
			nameCin, pos[0], pos[1], r1[0]); 
	    }
	}
    } else {
      fDefaultVolume1 = nameCin;
    }
    
    
// outer radius
    Int_t i;
    for (i=1; i<nr; i++) {
	if (r1[i] >= 0. && r2[i] >=0) {
	    if (r1[i]!=r2[i]) {
		d=zmax-zmin;
		if (r1[i] > r2[i]) {
		    pos[2]=zmin;
		    ro1=r1[i];
		    ro2=r2[i];
		} else {
		    pos[2]=zmax;
		    ro1=r2[i];
		    ro2=r1[i];
		    d=-d;
		}
		sprintf(nameCou, "C%4.4d", fNBodies++);
		nameCou[5]='\0';
		fprintf(fFile1,"%5s TRC%10.3f%10.3f%10.3f%10.3f%10.3f%10.3f\n",
			nameCou, pos[0], pos[1], pos[2], 0., 0., d); 
		fprintf(fFile1,"         %10.3f%10.3f\n",ro1,ro2);
	    } else {
		isCylinder=kTRUE;
		sprintf(nameCou, "C%4.4d", fNBodies++);
		nameCou[5]='\0';
		fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
			nameCou, pos[0], pos[1], r1[i]); 
	    }
	} else {
	  fDefaultVolume1 = nameCou;
	}
	
// Volumes
// ^^^^^^^
	if (Fields && Cuts) {
	    fprintf(fFile2,">%s:%s\n", Materials[i-1], Fields[i-1]);
	    fprintf(fFile2,"EMFCUT=%s\n", Cuts[i-1]);
	    fprintf(fFile2,"WW-FACTOR=%s\n", Cuts[i-1]);
	} else {
	    fprintf(fFile2,">%s:%s\n", Materials[i-1], "MF");
	    fprintf(fFile2,"EMFCUT=%s\n", "$UNSHIELDED");
	    fprintf(fFile2,"WW-FACTOR=%s\n", "$UNSHIELDED");
	}
	if (hasInner || isCylinder) {
	    if (!isCylinder) fprintf(fFile2,"+%5s-%5s+%5s-%5s\n", 
		    nameCou, nameCin, nameZou, nameZin);
	    if (isCylinder)  fprintf(fFile2,"+%5s+%5s-%5s\n",
		    nameCou, nameZou, nameZin); 
	} else {
	    fprintf(fFile2,"+%5s\n", nameCou);
	    hasInner=kTRUE;
	}
	fprintf(fFile2,"\n");        
	strcpy(nameCin,nameCou);
    }
}


void AliALIFE::PolyCone(Float_t* rmin, Float_t* rmax, Float_t* z, 
			Int_t nz,
			Float_t pos[3], 
			char* Material, char* Field, char* Cuts) 
{
//
// Equivalent to the Geant3 PCON
    Int_t i;
    for (i=0; i<nz-1; i++) {
// skip (z_i = z_i+1)
	if (z[i] == z[i+1]) continue;
	Cone(rmin[i], rmin[i+1], rmax[i], rmax[i+1], z[i], z[i+1], pos,
	     Material, Field, Cuts);
    }
}

void AliALIFE::OnionPolyCone(Float_t** r, Float_t* z,
			     Int_t nr, Int_t nz,
			     Float_t pos[3], 
			     char** Materials, char** Fields, char** Cuts)
{
//
// Concentric PCONS
    Int_t i, j;
    for (i=0; i<nz-1; i++) {
// skip (z_i = z_i+1)
	if (z[i] == z[i+1]) continue;
	for (j=0; j<nr-1; j++) {
	    if (Fields && Cuts) {
		Cone(r[i][j], r[i+1][j], r[i][j+1], r[i+1][j+1], 
		     z[i], z[i+1], pos,
		     Materials[i], Fields[i], Cuts[i]);
	    } else {
		Cone(r[i][j], r[i+1][j], r[i][j+1], r[i+1][j+1], 
		     z[i], z[i+1], pos,
		     Materials[i]);
	    }
	}
    }
}

void AliALIFE::Comment(char* Comment)
{
// Insert comment line
    fprintf(fFile1,"*%s\n", Comment);        
    fprintf(fFile2,"*%s\n", Comment);        
}


void AliALIFE::Finish(Bool_t iremove)
{
// Finish geometry definition
    char s[BUFSIZ];
    fprintf(fFile1,"      END\n");
    fclose(fFile2);
    fFile2=fopen(fVolumeFile,"r");
    while (fgets(s, BUFSIZ, fFile2)) {
	fputs(s,fFile1);
    }
    
    fclose(fFile1);
    fclose(fFile2);    
    if (iremove) {
	remove(fVolumeFile);
	remove(fBodyFile);
    }
}

void AliALIFE::Copy(AliALIFE&) const
{
    //
    // Copy 
    //
    Fatal("Copy","Not implemented!\n");
}
Commit	Line	Data
660eb9a2	1	/**************************************************************************
	2	* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
	3	* *
	4	* Author: The ALICE Off-line Project. *
	5	* Contributors are mentioned in the code where appropriate. *
	6	* *
	7	* Permission to use, copy, modify and distribute this software and its *
	8	* documentation strictly for non-commercial purposes is hereby granted *
	9	* without fee, provided that the above copyright notice appears in all *
	10	* copies and that both the copyright notice and this permission notice *
	11	* appear in the supporting documentation. The authors make no claims *
	12	* about the suitability of this software for any purpose. It is *
	13	* provided "as is" without express or implied warranty. *
	14	**************************************************************************/
	15
eeacf08b	16	/* $Id$ */
660eb9a2	17
eeacf08b	18	//----------------------------------------------------------------------
	19	// Helper class to write geometry in ALIFE format
	20	// in parallel with Geant geometry definition.
	21	// Author: A.Morsch
	22	//----------------------------------------------------------------------
88cb7938	23
660eb9a2	24	#include <AliALIFE.h>
	25
	26	ClassImp(AliALIFE)
	27
9b62c596	28
9b62c596	29	AliALIFE::AliALIFE(const char* file1, const char* file2)
660eb9a2	30	{
	31	// Constructor
	32	fNBodies = 0;
	33	fNVolumes= 0;
	34	fBodyFile = file1; // File for Fluka bodies
	35	fVolumeFile = file2;
	36	fFile1=fopen(fBodyFile,"w");
	37	fFile2=fopen(fVolumeFile,"w");
	38	BodyHeader();
	39	VolumeHeader();
	40	fDefaultVolume1 = "DEFAU1";
	41	fDefaultVolume2 = "DEFAU2";
	42	}
	43
9b62c596	44	AliALIFE::AliALIFE()
660eb9a2	45	{
	46	// Default constructor
	47	fBodyFile = "FlukaBody.inp";
	48	fVolumeFile = "FlukaVolume.inp";
	49	fFile1=fopen(fBodyFile,"w");
	50	fFile2=fopen(fVolumeFile,"w");
	51	BodyHeader();
	52	VolumeHeader();
	53	}
	54
	55	void AliALIFE::BodyHeader()
	56	{
	57	// Write header for body definitions
	58	fprintf(fFile1,"*\n");
	59	fprintf(fFile1,"GEOBEGIN COMBINAT\n");
	60	fprintf(fFile1," 0 0 AliRoot Generated\n");
	61	fprintf(fFile1,"*\n");
	62	fprintf(fFile1,"*== Body Definitions ================================================\n");
	63	fprintf(fFile1,"*\n");
	64
	65	}
	66
	67
	68	void AliALIFE::VolumeHeader()
	69	{
	70	// Write header for region (volume) definitions
	71	fprintf(fFile2,"REGIONS\n");
	72	fprintf(fFile2,"*\n");
	73	fprintf(fFile2,"*== Region Definitions =================================================\n");
	74	fprintf(fFile2,"*\n");
	75	}
	76
	77
	78	void AliALIFE:: Cylinder(Float_t rmin, Float_t rmax,
	79	Float_t zmin, Float_t zmax,
	80	Float_t pos[3],
	81	char* Material, char* Field, char* Cuts)
	82	{
	83	// Simple cylinder
	84	//
	85	// Bodies
	86	// ^^^^^^
	87	char name1[5], name2[5], name3[5], name4[5];
	88
	89	// outer radius
	90	sprintf(name1, "R%4.4d", fNBodies++);
	91	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",name1, pos[0], pos[1], rmax); // inner radius
	92	sprintf(name2, "R%4.4d", fNBodies++);
	93	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",name2, pos[0], pos[1], rmin);
	94	// z-max
	95	sprintf(name3, "Z%4.4d", fNBodies++);
	96	fprintf(fFile1,"%5s XYP%10.3f\n",name3, zmax);
	97	// z-min
	98	sprintf(name4, "Z%4.4d", fNBodies++);
	99	fprintf(fFile1,"%5s XYP%10.3f\n",name4, zmin);
	100	//
	101	// Volumes
	102	// ^^^^^^^
	103
	104	fprintf(fFile2,">%s:%s\n", Material, Field);
	105	fprintf(fFile2,"EMFCUT=%s\n", Cuts);
	106	fprintf(fFile2,"WW-FACTOR=%s\n", Cuts);
	107	if (rmin >0) {
	108	fprintf(fFile2,"+%s-%s+%s-%s\n", name1, name2, name3, name4);
109	} else {
110	fprintf(fFile2,"+%s+%s-%s\n", name1, name3, name4);
111	}
112
113	fprintf(fFile2,"\n");
114	}
115
116	void AliALIFE::OnionCylinder(Float_t* r, Int_t nr, Float_t zmin, Float_t zmax,
117	Float_t pos[3], char** Materials,
118	char Fields, char Cuts)
119	{
120	//
121	// Concentric cylinders
122	//
123
124	// Bodies
125	// ^^^^^^
126	char nameRin[6], nameRou[6], nameZin[6], nameZou[6];
127	// z-limits
128	// z-max
129	sprintf(nameZou, "Z%4.4d", fNBodies++);
130	nameZou[5]='\0';
131
132	fprintf(fFile1,"%5s XYP%10.3f\n",nameZou, zmax);
133	// z-min
134	sprintf(nameZin, "Z%4.4d", fNBodies++);
135	nameZin[5]='\0';
136	fprintf(fFile1,"%5s XYP%10.3f\n",nameZin, zmin);
137
138	// inner radius
139	sprintf(nameRin, "R%4.4d", fNBodies++);
140	nameRin[5]='\0';
141	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",nameRin, pos[0], pos[1], r[0]);
142
143	Int_t i;
144	for (i=1; i<nr; i++) {
145	// outer radius
146	sprintf(nameRou, "R%4.4d", fNBodies++);
147	nameRou[5]='\0';
148	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
149	nameRou, pos[0], pos[1], r[i]);
150	//
151	// Volumes
152	// ^^^^^^^
153	if (Fields && Cuts) {
154	fprintf(fFile2,">%s:%s\n", Materials[i-1], Fields[i-1]);
155	fprintf(fFile2,"EMFCUT=%s\n", Cuts[i-1]);
156	fprintf(fFile2,"WW-FACTOR=%s\n", Cuts[i-1]);
157	} else {
158	fprintf(fFile2,">%s:%s\n", Materials[i-1], "MF");
159	fprintf(fFile2,"EMFCUT=%s\n", "$UNSHIELDED");
160	fprintf(fFile2,"WW-FACTOR=%s\n", "$UNSHIELDED");
161	}
162	if (r[i-1] != 0.) {
163	fprintf(fFile2,"+%5s-%5s+%5s-%5s\n", nameZou, nameZin, nameRou, nameRin);
164	} else {
165	fprintf(fFile2,"+%5s-%5s+%5s\n", nameZou, nameZin, nameRou);
166	}
167	fprintf(fFile2,"\n");
886e839a	168	strcpy(nameRin,nameRou);
660eb9a2	169	}
	170	}
	171
	172
	173	void AliALIFE::Cone(Float_t rmin1, Float_t rmin2,
	174	Float_t rmax1, Float_t rmax2,
	175	Float_t zmin, Float_t zmax,
	176	Float_t pos[3],
	177	char* Material, char* Field, char* Cuts)
	178	{
	179	// Simple cone
	180
	181	//
	182	// Bodies
	183	// ^^^^^^
	184	char nameCou[6], nameCin[6];
	185	Float_t d, r1, r2;
	186	char nameZin[6], nameZou[6];
	187	// z-max
	188	sprintf(nameZou, "Z%4.4d", fNBodies++);
	189	fprintf(fFile1,"%5s XYP%10.3f\n",nameZou, zmax);
	190	// z-min
	191	sprintf(nameZin, "Z%4.4d", fNBodies++);
	192	fprintf(fFile1,"%5s XYP%10.3f\n",nameZin, zmin);
	193
	194	// outer radius
	195	d=zmax-zmin;
eeacf08b	196	sprintf(nameCou, "C%4.4d", fNBodies++);
660eb9a2	197	if (rmax1 >= 0. && rmax2 >= 0.) {
	198	if (rmax1!=rmax2) {
	199	if (rmax1 > rmax2) {
	200	pos[2]=zmin;
	201	r1=rmax1;
	202	r2=rmax2;
	203	} else {
	204	d=-d;
	205	pos[2]=zmax;
	206	r1=rmax2;
	207	r2=rmax1;
	208	}
660eb9a2	209	fprintf(fFile1,"%5s TRC%10.3f%10.3f%10.3f%10.3f%10.3f%10.3f\n",
	210	nameCou, pos[0], pos[1], pos[2], 0., 0., d);
	211	fprintf(fFile1," %10.3f%10.3f\n",r1,r2);
	212	} else {
660eb9a2	213	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
	214	nameCou, pos[0], pos[1], rmax1);
	215	}
	216	}else {
b7fab4b5	217	fDefaultVolume1 = nameCou;
660eb9a2	218	}
	219
	220
	221
	222	// inner radius
eeacf08b	223	sprintf(nameCin, "C%4.4d", fNBodies++);
660eb9a2	224	if (rmin1 >= 0. && rmin2 >= 0.) {
	225	if (rmin1!=rmin2) {
	226	if (rmin1 != 0 && rmin2 !=0) {
	227	d=zmax-zmin;
	228	if (rmin1 > rmin2) {
	229	pos[2]=zmin;
	230	r1=rmin1;
	231	r2=rmin2;
	232	} else {
	233	pos[2]=zmax;
	234	r1=rmin2;
	235	r2=rmin1;
	236	d=-d;
	237	}
660eb9a2	238	fprintf(fFile1,"%5s TRC%10.3f%10.3f%10.3f%10.3f%10.3f%10.3f\n",
	239	nameCin, pos[0], pos[1], pos[2], 0., 0., d);
	240	fprintf(fFile1," %10.3f%10.3f\n",r1,r2);
	241	}
	242	} else {
660eb9a2	243	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
	244	nameCin, pos[0], pos[1], rmin1);
	245	}
	246	}else {
b7fab4b5	247	fDefaultVolume2 = nameCin;
660eb9a2	248	}
	249
	250
	251
	252	//
	253	// Volumes
	254	// ^^^^^^^
	255	fprintf(fFile2,">%s:%s\n", Material, Field);
	256	fprintf(fFile2,"EMFCUT=%s\n", Cuts);
	257	fprintf(fFile2,"WW-FACTOR=%s\n", Cuts);
	258	if (rmin1 != 0 && rmin2 !=0) {
	259	fprintf(fFile2,"+%s-%s+%s-%s\n", nameCou, nameCin, nameZou, nameZin);
	260	} else {
	261	fprintf(fFile2,"+%s+%s-%s\n", nameCou, nameZou, nameZin);
	262	}
	263	fprintf(fFile2,"\n");
	264	}
	265
	266	void AliALIFE::OnionCone (Float_t* r1, Float_t* r2, Int_t nr,
	267	Float_t zmin, Float_t zmax,
	268	Float_t pos[3], char Materials, char Fields,
	269	char** Cuts)
	270	{
	271	// Concentric cones
	272	//
	273	char nameCin[6], nameCou[6], nameZin[6], nameZou[6];
	274	//
	275	// Bodies
	276	// ^^^^^^
	277	Float_t ri1, ri2, ro1, ro2, d;
	278
	279	// z-max
	280	sprintf(nameZou, "Z%4.4d", fNBodies++);
	281	fprintf(fFile1,"%5s XYP%10.3f\n",nameZou, zmax);
	282	// z-min
	283	sprintf(nameZin, "Z%4.4d", fNBodies++);
	284	fprintf(fFile1,"%5s XYP%10.3f\n",nameZin, zmin);
	285
	286	// inner radius
	287	d=zmax-zmin;
	288	Bool_t hasInner=kFALSE;
	289	Bool_t isCylinder=kFALSE;
	290	if (r1[0]>=0 && r2[0]>=0) {
	291	if (r1[0] != 0. && r2[0] !=0.) {
	292	if (r1[0]!=r2[0]) {
	293	hasInner=kTRUE;
	294	if (r1[0] > r2[0]) {
	295	pos[2]=zmin;
	296	ri1=r1[0];
	297	ri2=r2[0];
	298	} else {
	299	d=-d;
	300	pos[2]=zmax;
	301	ri1=r2[0];
	302	ri2=r1[0];
	303	}
	304	sprintf(nameCin, "C%4.4d", fNBodies++);
	305	nameCin[5]='\0';
	306	fprintf(fFile1,"%5s TRC%10.3f%10.3f%10.3f%10.3f%10.3f%10.3f\n",
	307	nameCin, pos[0], pos[1], pos[2], 0., 0., d);
	308	fprintf(fFile1," %10.3f%10.3f\n",ri1,ri2);
	309	} else {
	310	isCylinder=kTRUE;
	311	sprintf(nameCin, "C%4.4d", fNBodies++);
312	nameCin[5]='\0';
313	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
314	nameCin, pos[0], pos[1], r1[0]);
315	}
316	}
317	} else {
b7fab4b5	318	fDefaultVolume1 = nameCin;
660eb9a2	319	}
	320
	321
	322
	323	// outer radius
	324	Int_t i;
	325	for (i=1; i<nr; i++) {
	326	if (r1[i] >= 0. && r2[i] >=0) {
	327	if (r1[i]!=r2[i]) {
	328	d=zmax-zmin;
	329	if (r1[i] > r2[i]) {
	330	pos[2]=zmin;
	331	ro1=r1[i];
	332	ro2=r2[i];
	333	} else {
	334	pos[2]=zmax;
	335	ro1=r2[i];
	336	ro2=r1[i];
	337	d=-d;
	338	}
	339	sprintf(nameCou, "C%4.4d", fNBodies++);
	340	nameCou[5]='\0';
	341	fprintf(fFile1,"%5s TRC%10.3f%10.3f%10.3f%10.3f%10.3f%10.3f\n",
	342	nameCou, pos[0], pos[1], pos[2], 0., 0., d);
	343	fprintf(fFile1," %10.3f%10.3f\n",ro1,ro2);
	344	} else {
	345	isCylinder=kTRUE;
	346	sprintf(nameCou, "C%4.4d", fNBodies++);
	347	nameCou[5]='\0';
	348	fprintf(fFile1,"%5s ZCC%10.3f%10.3f%10.3f\n",
	349	nameCou, pos[0], pos[1], r1[i]);
	350	}
	351	} else {
b7fab4b5	352	fDefaultVolume1 = nameCou;
660eb9a2	353	}
	354
	355	// Volumes
	356	// ^^^^^^^
	357	if (Fields && Cuts) {
	358	fprintf(fFile2,">%s:%s\n", Materials[i-1], Fields[i-1]);
	359	fprintf(fFile2,"EMFCUT=%s\n", Cuts[i-1]);
	360	fprintf(fFile2,"WW-FACTOR=%s\n", Cuts[i-1]);
	361	} else {
	362	fprintf(fFile2,">%s:%s\n", Materials[i-1], "MF");
	363	fprintf(fFile2,"EMFCUT=%s\n", "$UNSHIELDED");
	364	fprintf(fFile2,"WW-FACTOR=%s\n", "$UNSHIELDED");
	365	}
38e826ad	366	if (hasInner \|\| isCylinder) {
38e826ad	367	if (!isCylinder) fprintf(fFile2,"+%5s-%5s+%5s-%5s\n",
660eb9a2	368	nameCou, nameCin, nameZou, nameZin);
38e826ad	369	if (isCylinder) fprintf(fFile2,"+%5s+%5s-%5s\n",
38e826ad	370	nameCou, nameZou, nameZin);
660eb9a2	371	} else {
	372	fprintf(fFile2,"+%5s\n", nameCou);
	373	hasInner=kTRUE;
	374	}
	375	fprintf(fFile2,"\n");
886e839a	376	strcpy(nameCin,nameCou);
660eb9a2	377	}
	378	}
	379
	380
	381	void AliALIFE::PolyCone(Float_t* rmin, Float_t* rmax, Float_t* z,
	382	Int_t nz,
	383	Float_t pos[3],
	384	char* Material, char* Field, char* Cuts)
	385	{
	386	//
	387	// Equivalent to the Geant3 PCON
	388	Int_t i;
	389	for (i=0; i<nz-1; i++) {
	390	// skip (z_i = z_i+1)
	391	if (z[i] == z[i+1]) continue;
	392	Cone(rmin[i], rmin[i+1], rmax[i], rmax[i+1], z[i], z[i+1], pos,
	393	Material, Field, Cuts);
	394	}
	395	}
	396
	397	void AliALIFE::OnionPolyCone(Float_t** r, Float_t* z,
	398	Int_t nr, Int_t nz,
	399	Float_t pos[3],
886e839a	400	char Materials, char Fields, char** Cuts)
660eb9a2	401	{
	402	//
	403	// Concentric PCONS
	404	Int_t i, j;
	405	for (i=0; i<nz-1; i++) {
	406	// skip (z_i = z_i+1)
	407	if (z[i] == z[i+1]) continue;
	408	for (j=0; j<nr-1; j++) {
	409	if (Fields && Cuts) {
	410	Cone(r[i][j], r[i+1][j], r[i][j+1], r[i+1][j+1],
	411	z[i], z[i+1], pos,
	412	Materials[i], Fields[i], Cuts[i]);
	413	} else {
	414	Cone(r[i][j], r[i+1][j], r[i][j+1], r[i+1][j+1],
	415	z[i], z[i+1], pos,
	416	Materials[i]);
	417	}
	418	}
	419	}
	420	}
	421
	422	void AliALIFE::Comment(char* Comment)
	423	{
	424	// Insert comment line
	425	fprintf(fFile1,"*%s\n", Comment);
	426	fprintf(fFile2,"*%s\n", Comment);
	427	}
	428
	429
e59713af	430	void AliALIFE::Finish(Bool_t iremove)
660eb9a2	431	{
	432	// Finish geometry definition
	433	char s[BUFSIZ];
	434	fprintf(fFile1," END\n");
	435	fclose(fFile2);
	436	fFile2=fopen(fVolumeFile,"r");
	437	while (fgets(s, BUFSIZ, fFile2)) {
	438	fputs(s,fFile1);
	439	}
	440
	441	fclose(fFile1);
	442	fclose(fFile2);
e59713af	443	if (iremove) {
	444	remove(fVolumeFile);
	445	remove(fBodyFile);
	446	}
660eb9a2	447	}
660eb9a2	448
9b62c596	449	void AliALIFE::Copy(AliALIFE&) const
	450	{
	451	//
	452	// Copy
	453	//
	454	Fatal("Copy","Not implemented!\n");
	455	}
660eb9a2	456
	457
	458
	459
	460
	461
	462
	463
	464
	465