]>
Commit | Line | Data |
---|---|---|
4c039060 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
43ea1292 | 18 | Revision 1.18 2001/06/21 14:16:43 morsch |
19 | Use absolute coordinates for mother volume PCON. | |
20 | ||
395de7f7 | 21 | Revision 1.17 2001/06/21 11:59:25 morsch |
22 | Some more details in compensator geometry. | |
23 | ||
34d8746c | 24 | Revision 1.16 2001/06/20 16:07:08 morsch |
25 | Compensator dipole MBWMD (MCB@SPS) added. | |
26 | ||
c557d782 | 27 | Revision 1.15 2001/03/16 15:34:37 morsch |
28 | Mothervolume defined MANY because overlap with station 3 mothervolume not avoidable (A. de Falco) | |
29 | ||
a37078b5 | 30 | Revision 1.14 2000/12/21 16:37:23 morsch |
31 | Use Al for coil and cable material. The materials used before cause the dipole to | |
32 | have hydrogene on the outer surface leading to unrealistic gamma rates due to | |
33 | n-capture. | |
34 | ||
ee7389e1 | 35 | Revision 1.13 2000/10/02 21:28:15 fca |
36 | Removal of useless dependecies via forward declarations | |
37 | ||
94de3818 | 38 | Revision 1.12 2000/06/20 10:53:01 morsch |
39 | Volume placed outside mother volume (DDIP) corrected (Galina Chabratova) | |
40 | ||
e094dc1b | 41 | Revision 1.11 2000/06/11 12:33:46 morsch |
42 | Coding rule violations corrected | |
43 | ||
b43eb0dc | 44 | Revision 1.10 2000/06/09 19:32:56 morsch |
45 | New detailed and corrected version from Galina Chabratova | |
46 | ||
1b206195 | 47 | Revision 1.9 2000/04/27 09:29:53 fca |
48 | Reverting to version 1.6.2 | |
49 | ||
d811c12b | 50 | Revision 1.6.2.1 1999/12/03 16:38:51 fca |
51 | Correct overlap in magnet | |
9e8c9316 | 52 | |
e821f75f | 53 | Revision 1.6 1999/09/29 09:24:30 fca |
54 | Introduction of the Copyright and cvs Log | |
55 | ||
4c039060 | 56 | */ |
57 | ||
fe4da5cc | 58 | /////////////////////////////////////////////////////////////////////////////// |
59 | // // | |
60 | // Magnetic Dipole version 1 // | |
61 | // // | |
62 | //Begin_Html | |
63 | /* | |
d811c12b | 64 | <img src="picts/AliDIPOv2Class.gif"> |
fe4da5cc | 65 | </pre> |
66 | <br clear=left> | |
67 | <font size=+2 color=red> | |
68 | <p>The responsible person for this module is | |
69 | <a href="mailto:andreas.morsch@cern.ch">Andreas Morsch</a>. | |
70 | </font> | |
71 | <pre> | |
72 | */ | |
73 | //End_Html | |
74 | // // | |
75 | // // | |
fe4da5cc | 76 | |
77 | #include "AliDIPOv2.h" | |
78 | #include "AliRun.h" | |
94de3818 | 79 | #include "AliMagF.h" |
fe4da5cc | 80 | #include "AliConst.h" |
81 | ||
82 | ClassImp(AliDIPOv2) | |
83 | ||
84 | //_____________________________________________________________________________ | |
1b206195 | 85 | AliDIPOv2::AliDIPOv2() |
fe4da5cc | 86 | { |
87 | // | |
1b206195 | 88 | // Last design of magnetic dipole version 2 |
fe4da5cc | 89 | // |
90 | } | |
91 | ||
92 | //_____________________________________________________________________________ | |
93 | AliDIPOv2::AliDIPOv2(const char *name, const char *title) | |
94 | : AliDIPO(name,title) | |
95 | { | |
96 | // | |
97 | // Standard constructor for the magnetic dipole version 2 | |
98 | SetMarkerColor(7); | |
99 | SetMarkerStyle(2); | |
100 | SetMarkerSize(0.4); | |
101 | } | |
c557d782 | 102 | |
fe4da5cc | 103 | void AliDIPOv2::CreateGeometry() |
c557d782 | 104 | { |
105 | // | |
106 | // Creation of the geometry of the magnetic DIPOLE version 2 | |
107 | // | |
108 | ||
109 | CreateSpectrometerDipole(); | |
110 | CreateCompensatorDipole(); | |
111 | } | |
112 | ||
113 | ||
114 | //_____________________________________________________________________________ | |
115 | void AliDIPOv2::CreateSpectrometerDipole() | |
fe4da5cc | 116 | { |
117 | // | |
118 | // Creation of the geometry of the magnetic DIPOLE version 2 | |
119 | // | |
1b206195 | 120 | |
395de7f7 | 121 | Float_t cpar[5], tpar[18], ypar[12]; |
fe4da5cc | 122 | Float_t dz, dx, dy; |
123 | Int_t idrotm[1899]; | |
b43eb0dc | 124 | Float_t accMax, the1, phi1, the2, phi2, the3, phi3; |
d811c12b | 125 | |
1b206195 | 126 | Int_t *idtmed = fIdtmed->GetArray()-1799; |
127 | ||
ee7389e1 | 128 | // const Int_t kCoil = 1813; |
129 | // const Int_t kCable= 1811; | |
130 | ||
131 | const Int_t kCoil = 1808; | |
132 | const Int_t kCable= 1808; | |
133 | ||
b43eb0dc | 134 | accMax = 9.; // ANGLE POLAIRE MAXIMUM |
1b206195 | 135 | |
fe4da5cc | 136 | // DIPOLE MAGNET |
395de7f7 | 137 | const Float_t kZDipole = 975; |
1b206195 | 138 | |
e094dc1b | 139 | tpar[0] = 0.; |
140 | tpar[1] = 360.; | |
395de7f7 | 141 | tpar[2] = 5.; |
e094dc1b | 142 | // |
395de7f7 | 143 | tpar[3] = -250.55+kZDipole; |
144 | tpar[4] = 30.5; | |
e094dc1b | 145 | tpar[5] = 527.34; |
146 | // | |
395de7f7 | 147 | tpar[6] = -160.7+kZDipole; |
148 | tpar[7] = 30.5; | |
e094dc1b | 149 | tpar[8] = 527.34; |
150 | // | |
395de7f7 | 151 | tpar[9] = 30.+kZDipole; |
152 | tpar[10] = 30.5; | |
e094dc1b | 153 | tpar[11] = 527.34; |
395de7f7 | 154 | |
155 | tpar[12] = 150.8+kZDipole; | |
e094dc1b | 156 | tpar[13] = 193.3; |
157 | tpar[14] = 527.34; | |
395de7f7 | 158 | // |
159 | tpar[15] = 250.55+kZDipole; | |
160 | tpar[16] = 193.3; | |
161 | tpar[17] = 527.34; | |
e094dc1b | 162 | |
1b206195 | 163 | |
395de7f7 | 164 | gMC->Gsvolu("DDIP", "PCON", idtmed[1814], tpar, 18); |
fe4da5cc | 165 | // COILS |
fe4da5cc | 166 | // air - m.f. |
1b206195 | 167 | cpar[0] = 207.; |
168 | cpar[1] = 274.; | |
169 | cpar[2] = 37.65; | |
170 | cpar[3] = 119.; | |
395de7f7 | 171 | cpar[4] = 241.; |
1b206195 | 172 | // coil - high cuts |
ee7389e1 | 173 | gMC->Gsvolu("DC1 ", "TUBS", idtmed[kCoil+40], cpar, 5); |
1b206195 | 174 | cpar[3] = -61.; |
175 | cpar[4] = 61.; | |
ee7389e1 | 176 | gMC->Gsvolu("DC2 ", "TUBS", idtmed[kCoil+40], cpar, 5); |
1b206195 | 177 | |
178 | // coil - low cuts cuts | |
179 | cpar[0] = 207.; | |
180 | // cpar[1] = cpar[0] + 10.; | |
181 | cpar[1] = 217; | |
182 | cpar[3] = 119.; | |
183 | cpar[4] = 241.; | |
184 | ||
ee7389e1 | 185 | gMC->Gsvolu("DC3 ", "TUBS", idtmed[kCoil], cpar, 5); |
1b206195 | 186 | cpar[0] = 207.; |
187 | cpar[1] = 217; | |
188 | cpar[3] = -61.; | |
189 | cpar[4] = 61.; | |
ee7389e1 | 190 | gMC->Gsvolu("DC4 ", "TUBS", idtmed[kCoil], cpar, 5); |
1b206195 | 191 | |
cfce8870 | 192 | gMC->Gspos("DC3 ", 1, "DC1 ", 0., 0., 0., 0, "ONLY"); |
cfce8870 | 193 | gMC->Gspos("DC4 ", 1, "DC2 ", 0., 0., 0., 0, "ONLY"); |
1b206195 | 194 | |
195 | // dz = 37.65 - 243.55 | |
196 | dz = -205.9-2.45; | |
197 | dx = 5.; | |
395de7f7 | 198 | gMC->Gspos("DC1 ", 1, "DDIP", dx, 0., dz+kZDipole, 0, "ONLY"); |
199 | gMC->Gspos("DC1 ", 2, "DDIP", dx, 0., -dz+kZDipole, 0, "ONLY"); | |
200 | gMC->Gspos("DC2 ", 1, "DDIP", -dx, 0., dz+kZDipole, 0, "ONLY"); | |
201 | gMC->Gspos("DC2 ", 2, "DDIP", -dx, 0., -dz+kZDipole, 0, "ONLY"); | |
fe4da5cc | 202 | the1 = 180.; |
203 | phi1 = 0.; | |
204 | the2 = 90.; | |
1b206195 | 205 | phi2 = 151.; |
fe4da5cc | 206 | the3 = 90.; |
1b206195 | 207 | phi3 = 61.; |
fe4da5cc | 208 | AliMatrix(idrotm[1800], the1, phi1, the2, phi2, the3, phi3); |
1b206195 | 209 | phi2 = 29.; //90-61 |
fe4da5cc | 210 | the3 = -90.; |
1b206195 | 211 | phi3 = -61.; |
fe4da5cc | 212 | AliMatrix(idrotm[1801], the1, phi1, the2, phi2, the3, phi3); |
213 | the1 = 0.; | |
214 | phi1 = 0.; | |
215 | the2 = 90.; | |
1b206195 | 216 | phi2 = 151.; |
fe4da5cc | 217 | the3 = 90.; |
1b206195 | 218 | phi3 = 61.; |
fe4da5cc | 219 | AliMatrix(idrotm[1802], the1, phi1, the2, phi2, the3, phi3); |
1b206195 | 220 | phi2 = 29.; |
fe4da5cc | 221 | the3 = -90.; |
1b206195 | 222 | phi3 = -61.; |
fe4da5cc | 223 | AliMatrix(idrotm[1803], the1, phi1, the2, phi2, the3, phi3); |
1b206195 | 224 | |
fe4da5cc | 225 | cpar[0] = 25.; |
1b206195 | 226 | cpar[1] = 100.3; //25+75.3 |
227 | cpar[2] = 33.5; | |
fe4da5cc | 228 | cpar[3] = 270.; |
229 | cpar[4] = 360.; | |
1b206195 | 230 | //* coil high cuts |
ee7389e1 | 231 | gMC->Gsvolu("DC11", "TUBS", idtmed[kCoil+40], cpar, 5); |
1b206195 | 232 | |
395de7f7 | 233 | dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad); |
1b206195 | 234 | dy = TMath::Cos(30.5*kDegrad) * -(207.+33.5); |
235 | dz = cpar[1] - 243.55-2.45; | |
395de7f7 | 236 | gMC->Gspos("DC11", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1800], "ONLY"); |
237 | gMC->Gspos("DC11", 2, "DDIP", dx, dy, -dz+kZDipole, idrotm[1802], "ONLY"); | |
238 | gMC->Gspos("DC11", 3, "DDIP", -dx, dy, dz+kZDipole, idrotm[1801], "ONLY"); | |
239 | gMC->Gspos("DC11", 4, "DDIP", -dx, dy, -dz+kZDipole, idrotm[1803], "ONLY"); | |
1b206195 | 240 | |
241 | ||
242 | ||
243 | //* ... higher cuts | |
fe4da5cc | 244 | cpar[0] = 25.; |
1b206195 | 245 | cpar[1] = 100.3; //25+75.3 |
246 | cpar[2] = 33.5; | |
fe4da5cc | 247 | cpar[3] = 0.; |
248 | cpar[4] = 90.; | |
1b206195 | 249 | //* coil high cuts |
ee7389e1 | 250 | gMC->Gsvolu("DC12", "TUBS", idtmed[kCoil+40], cpar, 5); |
1b206195 | 251 | |
395de7f7 | 252 | dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad); |
1b206195 | 253 | dy = TMath::Cos(30.5*kDegrad) *(207.+33.5); |
254 | dz = cpar[1] - 243.55-2.45; | |
395de7f7 | 255 | gMC->Gspos("DC12", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1801], "ONLY"); |
256 | gMC->Gspos("DC12", 2, "DDIP", dx, dy, -dz+kZDipole, idrotm[1803], "ONLY"); | |
257 | gMC->Gspos("DC12", 3, "DDIP", -dx, dy, dz+kZDipole, idrotm[1800], "ONLY"); | |
258 | gMC->Gspos("DC12", 4, "DDIP", -dx, dy, -dz+kZDipole, idrotm[1802], "ONLY"); | |
1b206195 | 259 | |
fe4da5cc | 260 | the1 = 90.; |
1b206195 | 261 | phi1 = 61.; |
fe4da5cc | 262 | the2 = 90.; |
1b206195 | 263 | phi2 = 151.; |
fe4da5cc | 264 | the3 = 0.; |
265 | phi3 = 0.; | |
266 | AliMatrix(idrotm[1804], the1, phi1, the2, phi2, the3, phi3); | |
267 | the1 = 90.; | |
1b206195 | 268 | phi1 = -61.; |
fe4da5cc | 269 | the2 = 90.; |
1b206195 | 270 | phi2 = -151.; |
fe4da5cc | 271 | AliMatrix(idrotm[1805], the1, phi1, the2, phi2, the3, phi3); |
1b206195 | 272 | the1 = 90.; |
273 | phi1 = 119.; //180 -61 | |
274 | the2 = 90.; | |
275 | phi2 = 209.; //270-61 | |
276 | AliMatrix(idrotm[1806], the1, phi1, the2, phi2, the3, phi3); | |
277 | the1 = 90.; | |
278 | phi1 = -119.; | |
279 | the2 = 90.; | |
280 | phi2 = -209.; | |
281 | AliMatrix(idrotm[1807], the1, phi1, the2, phi2, the3, phi3); | |
282 | ||
283 | //* coil - high cuts | |
284 | ||
285 | tpar[0] = 37.65; | |
286 | tpar[1] = 33.5; | |
287 | tpar[2] = 145.5; | |
ee7389e1 | 288 | gMC->Gsvolu("DL1 ", "BOX ", idtmed[kCoil+40], tpar, 3); |
1b206195 | 289 | |
290 | // coil - low cuts | |
291 | ||
292 | tpar[0] = 5.; | |
293 | dx = 37.65 - 5.; | |
ee7389e1 | 294 | gMC->Gsvolu("DL2 ", "BOX ", idtmed[kCoil], tpar, 3); |
1b206195 | 295 | gMC->Gspos("DL2 ", 1, "DL1 ", dx, 0., 0., 0, "ONLY"); |
296 | ||
297 | dx =-53.62; | |
298 | dy =-241.26819; | |
395de7f7 | 299 | dz = 0.; |
300 | gMC->Gspos("DL1 ", 1, "DDIP", dx, dy, dz+kZDipole, idrotm[1804], "ONLY"); | |
301 | gMC->Gspos("DL1 ", 2, "DDIP", dx, -dy, dz+kZDipole, idrotm[1805], "ONLY"); | |
302 | gMC->Gspos("DL1 ", 3, "DDIP",-dx, dy, dz+kZDipole, idrotm[1806], "ONLY"); | |
303 | gMC->Gspos("DL1 ", 4, "DDIP",-dx, -dy, dz+kZDipole, idrotm[1807], "ONLY"); | |
1b206195 | 304 | |
305 | // Contactor | |
306 | ||
307 | // high cuts | |
308 | ||
309 | //Steel outer face planes | |
310 | ||
311 | cpar[0] = 207.-18.6; | |
312 | cpar[1] = 274.+18.6; | |
313 | cpar[2] = 1.; | |
314 | cpar[3] = -50.; | |
315 | cpar[4] = 50.; | |
316 | ||
317 | gMC->Gsvolu("DCO1", "TUBS", idtmed[1818], cpar, 5); | |
318 | dx = -5.; | |
319 | dz = 168.25-1.5-1.; | |
395de7f7 | 320 | gMC->Gspos("DCO1", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 321 | dz = 243.55+4.5+1.5+1.; |
395de7f7 | 322 | gMC->Gspos("DCO1", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
d811c12b | 323 | |
1b206195 | 324 | // 9.06.2000 |
325 | ||
326 | // cpar[0] = 207.-18.6; | |
327 | // cpar[1] = 274.+18.6; | |
328 | // cpar[2] = 1.; | |
329 | cpar[3] = 180.-50.; | |
330 | cpar[4] = 180.+50.; | |
331 | ||
332 | gMC->Gsvolu("DCO2", "TUBS", idtmed[1818], cpar, 5); | |
333 | dx = +5.; | |
334 | dz = 168.25-1.5-1.; | |
395de7f7 | 335 | gMC->Gspos("DCO2", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 336 | dz = 243.55+4.5+1.5+1.; |
395de7f7 | 337 | gMC->Gspos("DCO2", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 338 | |
339 | ||
340 | ||
341 | // Resin face planes | |
342 | ||
343 | cpar[0] = 207.; | |
344 | cpar[1] = 274.; | |
345 | cpar[2] = .75; | |
346 | cpar[3] = -50.; | |
347 | cpar[4] = 50.; | |
348 | ||
349 | gMC->Gsvolu("DCO3", "TUBS", idtmed[1812], cpar, 5); | |
350 | dx = -5; | |
351 | dz = 168.25-0.75; | |
395de7f7 | 352 | gMC->Gspos("DCO3", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 353 | dz = 243.55+4.5+0.75; |
395de7f7 | 354 | gMC->Gspos("DCO3", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 355 | |
356 | // 9.06.2000 | |
357 | ||
358 | cpar[3] = 180.-50.; | |
359 | cpar[4] = 180.+50.; | |
360 | gMC->Gsvolu("DCO4", "TUBS", idtmed[1812], cpar, 5); | |
361 | dx = +5; | |
362 | dz = 168.25-0.75; | |
395de7f7 | 363 | gMC->Gspos("DCO4", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
364 | dz = 243.55+4.5+0.75 ; | |
365 | gMC->Gspos("DCO4", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
1b206195 | 366 | |
367 | ||
368 | // G10 face plane | |
369 | ||
370 | cpar[0] = 207.; | |
371 | cpar[1] = 274.; | |
372 | cpar[2] = 2.25; | |
373 | cpar[3] = -50.; | |
374 | cpar[4] = 50.; | |
375 | ||
376 | gMC->Gsvolu("DCO5", "TUBS", idtmed[1810], cpar, 5); | |
377 | ||
378 | dx = -5; | |
379 | dz = 243.55+2.25; | |
395de7f7 | 380 | gMC->Gspos("DCO5", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 381 | |
382 | // 9.06.2000 | |
383 | ||
384 | cpar[3] = 180.-50.; | |
385 | cpar[4] = 180.+50.; | |
386 | ||
387 | gMC->Gsvolu("DCO6", "TUBS", idtmed[1810], cpar, 5); | |
388 | ||
389 | dx = +5; | |
395de7f7 | 390 | dz = 243.55+2.25; |
391 | gMC->Gspos("DCO6", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
1b206195 | 392 | |
393 | //Steel supported planes | |
394 | ||
395 | cpar[0] = 274.+1.5+2.; | |
396 | cpar[1] = 274.+18.6; | |
397 | cpar[2] = 1.; | |
398 | cpar[3] = -50.; | |
399 | cpar[4] = 50.; | |
400 | ||
401 | gMC->Gsvolu("DCO7", "TUBS", idtmed[1818], cpar, 5); | |
402 | ||
403 | dx = -5; | |
404 | dz = 168.25+1.; | |
395de7f7 | 405 | gMC->Gspos("DCO7", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 406 | |
407 | // 9.06.2000 | |
408 | cpar[0] = 274.+1.5+2.; | |
409 | cpar[1] = 274.+18.6; | |
410 | cpar[2] = 1.; | |
411 | cpar[3] = 180.-50.; | |
412 | cpar[4] = 180.+50.; | |
413 | ||
414 | ||
415 | gMC->Gsvolu("DCO8", "TUBS", idtmed[1818], cpar, 5); | |
416 | ||
417 | dx = +5; | |
418 | dz = 168.25+1.; | |
395de7f7 | 419 | gMC->Gspos("DCO8", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 420 | |
421 | // | |
422 | ||
423 | cpar[0] = 207.- 18.6; | |
424 | cpar[1] = 207.- 2.- 1.5; | |
425 | cpar[2] = 1.; | |
426 | cpar[3] = -50.; | |
427 | cpar[4] = 50.; | |
428 | ||
429 | gMC->Gsvolu("DCO9", "TUBS", idtmed[1818], cpar, 5); | |
430 | ||
431 | dx = -5; | |
432 | dz = 168.25+1.; | |
395de7f7 | 433 | gMC->Gspos("DCO9", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 434 | |
435 | // 9.06.2000 | |
436 | ||
437 | cpar[0] = 207.- 18.6; | |
438 | cpar[1] = 207.- 2.- 1.5; | |
439 | cpar[2] = 1.; | |
440 | cpar[3] = 180.-50.; | |
441 | cpar[4] = 180.+50.; | |
442 | ||
443 | gMC->Gsvolu("DCOA", "TUBS", idtmed[1818], cpar, 5); | |
444 | ||
445 | dx = +5; | |
446 | dz = 168.25+1.; | |
395de7f7 | 447 | gMC->Gspos("DCOA", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 448 | |
449 | ||
450 | // Sides steel planes | |
451 | ||
452 | cpar[0] = 207. - 1.5 -2.; | |
395de7f7 | 453 | cpar[1] = 207. - 1.5; |
1b206195 | 454 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; |
455 | cpar[3] = -50.; | |
456 | cpar[4] = 50.; | |
457 | ||
458 | gMC->Gsvolu("DCOB", "TUBS", idtmed[1818], cpar, 5); | |
459 | ||
460 | cpar[0] = 274. + 1.5; | |
461 | cpar[1] = 274. + 1.5 +2.; | |
462 | ||
463 | gMC->Gsvolu("DCOC", "TUBS", idtmed[1818], cpar, 5); | |
464 | ||
465 | dx=-5.; | |
466 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
395de7f7 | 467 | gMC->Gspos("DCOB", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
468 | gMC->Gspos("DCOC", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
1b206195 | 469 | |
470 | // 9.06.2000 | |
471 | ||
472 | cpar[0] = 207. - 1.5 -2.; | |
395de7f7 | 473 | cpar[1] = 207. - 1.5; |
1b206195 | 474 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; |
475 | cpar[3] = 180.-50.; | |
476 | cpar[4] = 180.+50.; | |
477 | ||
478 | gMC->Gsvolu("DCOD", "TUBS", idtmed[1818], cpar, 5); | |
479 | ||
480 | cpar[0] = 274. + 1.5; | |
481 | cpar[1] = 274. + 1.5 +2.; | |
482 | ||
483 | gMC->Gsvolu("DCOE", "TUBS", idtmed[1818], cpar, 5); | |
484 | ||
485 | dx=+5.; | |
486 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
395de7f7 | 487 | gMC->Gspos("DCOD", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
488 | gMC->Gspos("DCOE", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
1b206195 | 489 | |
490 | ||
491 | // Top and bottom resin planes | |
492 | ||
395de7f7 | 493 | cpar[0] = 207. - 1.5; |
494 | cpar[1] = 207.; | |
1b206195 | 495 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; |
496 | cpar[3] = -50.; | |
497 | cpar[4] = 50.; | |
498 | ||
499 | gMC->Gsvolu("DCOF", "TUBS", idtmed[1812], cpar, 5); | |
500 | ||
501 | cpar[0] = 274.; | |
502 | cpar[1] = 274. + 1.5; | |
503 | ||
504 | gMC->Gsvolu("DCOG", "TUBS", idtmed[1812], cpar, 5); | |
505 | ||
506 | ||
507 | dx=-5.; | |
508 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
395de7f7 | 509 | gMC->Gspos("DCOF", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
510 | gMC->Gspos("DCOG", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
1b206195 | 511 | |
512 | // 9.06.2000 | |
395de7f7 | 513 | cpar[0] = 207. - 1.5; |
514 | cpar[1] = 207.; | |
1b206195 | 515 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; |
516 | ||
517 | cpar[3] = 180.-50.; | |
518 | cpar[4] = 180.+50.; | |
519 | ||
520 | gMC->Gsvolu("DCOH", "TUBS", idtmed[1812], cpar, 5); | |
521 | ||
522 | cpar[0] = 274.; | |
523 | cpar[1] = 274. + 1.5; | |
524 | ||
525 | gMC->Gsvolu("DCOI", "TUBS", idtmed[1812], cpar, 5); | |
526 | ||
527 | ||
528 | dx=+5.; | |
529 | dz = ((243.55+4.5+1.5)+168.25)/2; | |
395de7f7 | 530 | gMC->Gspos("DCOH", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
531 | gMC->Gspos("DCOI", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); | |
1b206195 | 532 | |
533 | ||
534 | // Aluminum cabels | |
535 | ||
536 | cpar[0] = 274. + 1.5 +2.; | |
537 | cpar[1] = 274. + 1.5 +2. + 80.; | |
538 | cpar[2] = 5.05/2; | |
539 | cpar[3] = -24.; | |
540 | cpar[4] = 24.; | |
541 | ||
ee7389e1 | 542 | gMC->Gsvolu("DCOJ", "TUBS", idtmed[kCable], cpar, 5); |
1b206195 | 543 | |
544 | // dx = 274. + 1.5 +2. +40.; | |
545 | // dx = 5. + 1.5 +2. +40.; | |
546 | // dx = 5. + 1.5 +2.; | |
547 | dx=-5.; | |
548 | dz = 168.25 + 5.05 + 5.05/2; | |
395de7f7 | 549 | gMC->Gspos("DCOJ", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 550 | |
551 | dz = 243.55 - 5.05/2; | |
395de7f7 | 552 | gMC->Gspos("DCOJ", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 553 | |
554 | // 9.06.2000 | |
555 | ||
556 | cpar[3] = 180.-24.; | |
557 | cpar[4] = 180.+24.; | |
558 | ||
ee7389e1 | 559 | gMC->Gsvolu("DCOK", "TUBS", idtmed[kCable], cpar, 5); |
1b206195 | 560 | |
561 | // dx = 274. + 1.5 +2. +40.; | |
562 | // dx = 5. + 1.5 +2. +40.; | |
563 | // dx = 5. + 1.5 +2.; | |
564 | dx=+5.; | |
565 | dz = 168.25 + 5.05 + 5.05/2; | |
395de7f7 | 566 | gMC->Gspos("DCOK", 1, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 567 | |
568 | dz = 243.55 - 5.05/2; | |
395de7f7 | 569 | gMC->Gspos("DCOK", 2, "DDIP", dx, 0, dz+kZDipole, 0, "ONLY"); |
1b206195 | 570 | |
571 | ||
fe4da5cc | 572 | // YOKE |
1b206195 | 573 | |
574 | // Top and bottom blocks | |
395de7f7 | 575 | ypar[0] = 298.1; |
1b206195 | 576 | ypar[1] = 69.5; |
577 | ypar[2] = 155.75; | |
578 | ||
579 | // iron- high cuts | |
580 | gMC->Gsvolu("DY1 ", "BOX ", idtmed[1858], ypar, 3); | |
395de7f7 | 581 | ypar[0] = 144.+10.; |
1b206195 | 582 | ypar[1] = 193.3+10.; |
fe4da5cc | 583 | ypar[2] = 5.; |
1b206195 | 584 | ypar[3] = 155.75; |
585 | dy = -69.5 + 5.; | |
586 | // iron- low cuts | |
587 | gMC->Gsvolu("DY11", "TRD1", idtmed[1818], ypar, 4); | |
588 | gMC->Gspos("DY11", 1, "DY1 ", 0., dy, 0., 0, "ONLY"); | |
589 | ||
590 | dy = 365.5; | |
591 | dz = 4.95; | |
395de7f7 | 592 | gMC->Gspos("DY1 ", 1, "DDIP", 0., dy, -dz+kZDipole, 0, "ONLY"); |
1b206195 | 593 | |
594 | the1 = 270.; | |
fe4da5cc | 595 | phi1 = 0.; |
1b206195 | 596 | the2 = 270.; |
fe4da5cc | 597 | phi2 = 90.; |
1b206195 | 598 | the3 = 0.; |
fe4da5cc | 599 | phi3 = 0.; |
1b206195 | 600 | AliMatrix(idrotm[1808], the1, phi1, the2, phi2, the3, phi3); |
395de7f7 | 601 | gMC->Gspos("DY1 ", 2, "DDIP", 0., -dy, -dz+kZDipole, idrotm[1808] , "ONLY"); |
1b206195 | 602 | |
603 | // side walls | |
395de7f7 | 604 | // ypar[0] = 579./2.; |
605 | ypar[0] = 296.; | |
1b206195 | 606 | ypar[1] = 0.; |
607 | ypar[2] = 0.; | |
608 | ypar[3] = 155.75; | |
395de7f7 | 609 | ypar[4] = 47.9; |
1b206195 | 610 | ypar[5] = 72.55; |
395de7f7 | 611 | ypar[6] = 4.3058039629; |
1b206195 | 612 | // z+ |
613 | ypar[7] = 155.75; | |
395de7f7 | 614 | ypar[8] = 47.9; |
1b206195 | 615 | ypar[9] = 72.55; |
395de7f7 | 616 | ypar[10] = 4.3058039629; |
1b206195 | 617 | |
618 | // iron - high cuts | |
619 | ||
620 | gMC->Gsvolu("DY2 ", "TRAP", idtmed[1858], ypar,11); | |
621 | ||
622 | ypar[4] = 47.9 -5.; | |
623 | ypar[5] = 72.55 -5.; | |
624 | ||
625 | ypar[8] = 47.9 -5.; | |
626 | ypar[9] = 72.55 -5.; | |
627 | ||
628 | ||
629 | // iron - low cuts | |
630 | ||
631 | gMC->Gsvolu("DY22", "TRAP", idtmed[1818], ypar,11); | |
632 | ||
633 | dy = 0.; | |
634 | dx = -5.; | |
635 | ||
636 | gMC->Gspos("DY22", 1, "DY2 ", dx, dy, 0., 0, "ONLY"); | |
637 | ||
638 | the1 = 90.; | |
639 | phi1 = 180.; | |
640 | the2 = 180.; | |
641 | phi2 = 180.; | |
642 | the3 = 90.; | |
643 | phi3 = 90.; | |
644 | AliMatrix(idrotm[1809], the1, phi1, the2, phi2, the3, phi3); | |
645 | ||
646 | the1 = 90.; | |
fe4da5cc | 647 | phi1 = 0.; |
1b206195 | 648 | the2 = 180.; |
649 | phi2 = 0.; | |
395de7f7 | 650 | the3 = 90.; |
1b206195 | 651 | phi3 = 90.; |
652 | AliMatrix(idrotm[1810], the1, phi1, the2, phi2, the3, phi3); | |
653 | ||
654 | dx = 228.875; | |
655 | dz = - 4.95; | |
395de7f7 | 656 | |
657 | gMC->Gspos("DY2 ", 1, "DDIP", dx, 0.0, dz+kZDipole, idrotm[1809], "ONLY"); | |
658 | gMC->Gspos("DY2 ", 2, "DDIP", -dx, 0.0, dz+kZDipole, idrotm[1810], "ONLY"); | |
1b206195 | 659 | |
395de7f7 | 660 | gMC->Gspos("DDIP", 1, "ALIC", 0., 0., 0., 0, "ONLY"); |
1b206195 | 661 | |
cfce8870 | 662 | gMC->Gsatt("DDIP", "SEEN", 0); |
1b206195 | 663 | // gMC->Gsatt("DC21", "SEEN", 0); |
664 | // gMC->Gsatt("DC22", "SEEN", 0); | |
665 | // gMC->Gsatt("DC3 ", "SEEN", 0); | |
666 | // gMC->Gsatt("DC4 ", "SEEN", 0); | |
fe4da5cc | 667 | } |
668 | ||
c557d782 | 669 | |
670 | void AliDIPOv2::CreateCompensatorDipole() | |
671 | { | |
672 | // | |
673 | // Geometry of the compensator Dipole MBWMD (was MCB @ SPS) | |
674 | // | |
675 | Int_t *idtmed = fIdtmed->GetArray()-1799; | |
676 | Int_t idrotm[1899]; | |
677 | // | |
678 | Float_t pbox[3] = {62.5, 62.5, 170.}; | |
679 | ||
680 | // Mother volumes | |
681 | gMC->Gsvolu("DCM0", "BOX", idtmed[1814], pbox, 3); | |
34d8746c | 682 | |
c557d782 | 683 | // |
34d8746c | 684 | // Mother volume containing lower coil |
c557d782 | 685 | pbox[0] = 58.5/2.; |
686 | pbox[1] = 30.0; | |
34d8746c | 687 | pbox[2] = 152.5; |
688 | ||
c557d782 | 689 | gMC->Gsvolu("DCML", "BOX", idtmed[1809], pbox, 3); |
690 | // | |
691 | // Base | |
692 | pbox[0] = 62.5; | |
693 | pbox[1] = 15.0; | |
694 | gMC->Gsvolu("DCBA", "BOX", idtmed[1809], pbox, 3); | |
c557d782 | 695 | // |
696 | // Coil: straight sections, horizontal | |
697 | pbox[0] = 6.; | |
698 | pbox[1] = 11.; | |
34d8746c | 699 | pbox[2] = 135.; |
c557d782 | 700 | gMC->Gsvolu("DCH1", "BOX", idtmed[1816], pbox, 3); |
701 | // | |
702 | // Coil: straight sections, horizontal | |
703 | pbox[0] = 6.; | |
704 | pbox[1] = 11.; | |
705 | pbox[2] = 135.; | |
706 | gMC->Gsvolu("DCH2", "BOX", idtmed[1816], pbox, 3); | |
707 | ||
708 | // | |
709 | // Mother volume containing upper coil | |
710 | pbox[0] = 8.0; | |
711 | pbox[1] = 17.5; | |
712 | pbox[2] = 135.0; | |
713 | gMC->Gsvolu("DCMU", "BOX", idtmed[1809], pbox, 3); | |
714 | ||
715 | // | |
716 | // Coil: straight sections, vertical | |
34d8746c | 717 | pbox[0] = 6.0; |
718 | pbox[1] = 9.5; | |
719 | pbox[2] = 11.0; | |
c557d782 | 720 | |
721 | gMC->Gsvolu("DCCV", "BOX", idtmed[1816], pbox, 3); | |
722 | // | |
723 | // Coil: circular section | |
724 | ||
725 | Float_t ptubs[5]; | |
726 | ptubs[0] = 0.; | |
727 | ptubs[1] = 35.; | |
728 | ptubs[2] = 8.; | |
729 | ptubs[3] = 0.; | |
730 | ptubs[4] = 90.; | |
34d8746c | 731 | // gMC->Gsvolu("DCC1", "TUBS", idtmed[1809], ptubs, 5); |
c557d782 | 732 | ptubs[0] = 13.; |
733 | ptubs[1] = 35.; | |
734 | ptubs[2] = 6.; | |
34d8746c | 735 | ptubs[3] = 0.; |
736 | ptubs[4] = 90.; | |
737 | gMC->Gsvolu("DCC1", "TUBS", idtmed[1816], ptubs, 5); | |
738 | // | |
739 | // Clamps | |
740 | Float_t ppgon[10]; | |
741 | ppgon[0] = 0.; | |
742 | ppgon[1] = 90.; | |
743 | ppgon[2] = 1.; | |
744 | ppgon[3] = 2.; | |
745 | ppgon[4] = -1.; | |
746 | ppgon[5] = 0.; | |
747 | ppgon[6] = 24.75; | |
748 | ppgon[7] = 1.; | |
749 | ppgon[8] = 0.; | |
750 | ppgon[9] = 24.75; | |
751 | gMC->Gsvolu("DCLA", "PGON", idtmed[1809], ppgon, 10); | |
c557d782 | 752 | // |
753 | // Assemble all | |
754 | // | |
755 | AliMatrix(idrotm[1811], -90., 0., 90., 90., 0., 0.); | |
34d8746c | 756 | AliMatrix(idrotm[1812], 0., 0., 90., 90., 90., 0.); |
c557d782 | 757 | AliMatrix(idrotm[1813], 180., 0., 90., 90., 90., 0.); |
34d8746c | 758 | AliMatrix(idrotm[1814], 0., 180., 90., 270., 90., 0.); |
759 | AliMatrix(idrotm[1815], 180., 180., 90., 270., 90., 0.); | |
760 | ||
761 | gMC->Gspos("DCH1", 1, "DCML", 23.25, -13., -17.5, 0, "ONLY"); | |
762 | gMC->Gspos("DCCV", 1, "DCM0", 12., 19., -159., 0, "ONLY"); | |
763 | gMC->Gspos("DCCV", 2, "DCM0", -12., 19., -159., 0, "ONLY"); | |
764 | gMC->Gspos("DCCV", 3, "DCML", 23.25, 20.5, 141.5, 0, "ONLY"); | |
c557d782 | 765 | |
34d8746c | 766 | gMC->Gspos("DCML", 1, "DCM0", -33.25, -2.5, 17.5, 0, "ONLY"); |
767 | gMC->Gspos("DCML", 2, "DCM0", 33.25, -2.5, 17.5, idrotm[1811], "ONLY"); | |
c557d782 | 768 | |
769 | ||
34d8746c | 770 | gMC->Gspos("DCH2", 1, "DCMU", 2., 6.5, 0., 0, "ONLY"); |
c557d782 | 771 | gMC->Gspos("DCMU", 1, "DCM0", -12., 45., 0., 0, "ONLY"); |
772 | gMC->Gspos("DCMU", 2, "DCM0", 12., 45., 0., idrotm[1811], "ONLY"); | |
773 | ||
34d8746c | 774 | // gMC->Gspos("DCC2", 1, "DCC1", 0., 0., 0., 0, "ONLY"); |
c557d782 | 775 | |
776 | gMC->Gspos("DCC1", 1, "DCM0", -12., 27.5, 135., idrotm[1812], "ONLY"); | |
777 | gMC->Gspos("DCC1", 2, "DCM0", 12., 27.5, 135., idrotm[1812], "ONLY"); | |
778 | gMC->Gspos("DCC1", 3, "DCM0", -12., 27.5, -135., idrotm[1813], "ONLY"); | |
779 | gMC->Gspos("DCC1", 4, "DCM0", 12., 27.5, -135., idrotm[1813], "ONLY"); | |
780 | ||
34d8746c | 781 | gMC->Gspos("DCC1", 5, "DCM0", 12., 27.5-32.+13., -135., idrotm[1815], "ONLY"); |
782 | gMC->Gspos("DCC1", 6, "DCM0", -12., 27.5-32.+13., -135., idrotm[1815], "ONLY"); | |
783 | ||
784 | gMC->Gspos("DCC1", 7, "DCML", 23.25, -13+13.+11., 117.5, idrotm[1814], "ONLY"); | |
785 | ||
786 | gMC->Gspos("DCLA", 1, "DCM0", 20., 27.5, -134., 0, "ONLY"); | |
787 | gMC->Gspos("DCLA", 2, "DCM0", 20., 27.5, -44., 0, "ONLY"); | |
788 | gMC->Gspos("DCLA", 3, "DCM0", 20., 27.5, 46., 0, "ONLY"); | |
789 | gMC->Gspos("DCLA", 4, "DCM0", 20., 27.5, 134., 0, "ONLY"); | |
790 | ||
791 | gMC->Gspos("DCLA", 5, "DCM0", -20., 27.5, -134., idrotm[1811], "ONLY"); | |
792 | gMC->Gspos("DCLA", 6, "DCM0", -20., 27.5, -44., idrotm[1811], "ONLY"); | |
793 | gMC->Gspos("DCLA", 7, "DCM0", -20., 27.5, 46., idrotm[1811], "ONLY"); | |
794 | gMC->Gspos("DCLA", 8, "DCM0", -20., 27.5, 134., idrotm[1811], "ONLY"); | |
c557d782 | 795 | |
c557d782 | 796 | |
34d8746c | 797 | gMC->Gspos("DCBA", 1, "DCM0", 0., -47.5 , 17.5, 0, "ONLY"); |
c557d782 | 798 | gMC->Gspos("DCM0", 1, "ALIC", 0., -6.75, -975., 0, "ONLY"); |
799 | ||
800 | ||
801 | } | |
802 | ||
fe4da5cc | 803 | //_____________________________________________________________________________ |
b8032157 | 804 | void AliDIPOv2::DrawModule() |
fe4da5cc | 805 | { |
806 | // | |
807 | // Draw a shaded view of the muon absorber | |
808 | // | |
809 | ||
fe4da5cc | 810 | // Set everything unseen |
cfce8870 | 811 | gMC->Gsatt("*", "seen", -1); |
fe4da5cc | 812 | // |
813 | // Set ALIC mother transparent | |
cfce8870 | 814 | gMC->Gsatt("ALIC","SEEN",0); |
fe4da5cc | 815 | // |
816 | // Set the volumes visible | |
cfce8870 | 817 | gMC->Gsatt("DDIP","seen",0); |
818 | gMC->Gsatt("DC1 ","seen",1); | |
819 | gMC->Gsatt("DC2 ","seen",1); | |
820 | gMC->Gsatt("DC3 ","seen",1); | |
821 | gMC->Gsatt("DC4 ","seen",1); | |
822 | gMC->Gsatt("DC11","seen",1); | |
823 | gMC->Gsatt("DC21","seen",1); | |
824 | gMC->Gsatt("DC12","seen",1); | |
825 | gMC->Gsatt("DC22","seen",1); | |
826 | gMC->Gsatt("DL1 ","seen",1); | |
827 | gMC->Gsatt("DL2 ","seen",1); | |
828 | gMC->Gsatt("DY1 ","seen",1); | |
829 | gMC->Gsatt("DY2 ","seen",1); | |
830 | gMC->Gsatt("DYL ","seen",1); | |
831 | gMC->Gsatt("DY3 ","seen",1); | |
1b206195 | 832 | // gMC->Gsatt("DY4 ","seen",1); |
833 | // gMC->Gsatt("DY5 ","seen",1); | |
834 | // gMC->Gsatt("DY6 ","seen",1); | |
835 | // gMC->Gsatt("DY7 ","seen",1); | |
fe4da5cc | 836 | // |
cfce8870 | 837 | gMC->Gdopt("hide", "on"); |
838 | gMC->Gdopt("shad", "on"); | |
839 | gMC->Gsatt("*", "fill", 7); | |
840 | gMC->SetClipBox("."); | |
841 | gMC->SetClipBox("."); | |
842 | gMC->DefaultRange(); | |
843 | gMC->Gdraw("alic", 30, 30, 0, 17, 13.5, .019, .019); | |
844 | gMC->Gdhead(1111, "Magnetic Dipole Version 2"); | |
845 | gMC->Gdman(16, 4, "MAN"); | |
fe4da5cc | 846 | } |
847 | ||
c557d782 | 848 | |
849 | ||
850 | ||
fe4da5cc | 851 | //_____________________________________________________________________________ |
852 | void AliDIPOv2::CreateMaterials() | |
853 | { | |
854 | // | |
855 | // Create Materials for Magnetic Dipole version 2 | |
856 | // | |
857 | ||
b43eb0dc | 858 | Int_t isxfld = gAlice->Field()->Integ(); |
859 | Float_t sxmgmx = gAlice->Field()->Max(); | |
fe4da5cc | 860 | |
861 | Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 }; | |
862 | Float_t zsteel[4] = { 26.,24.,28.,14. }; | |
863 | Float_t wsteel[4] = { .715,.18,.1,.005 }; | |
1b206195 | 864 | |
fe4da5cc | 865 | Float_t acoil[3] = { 26.98,1.01,16. }; |
866 | Float_t zcoil[3] = { 13.,1.,8. }; | |
867 | Float_t wcoil[3] = { .66,.226,.114 }; | |
1b206195 | 868 | |
869 | Float_t aresi[3] = { 1.01,12.011,16.}; | |
870 | Float_t zresi[3] = { 1.,6.,8. }; | |
871 | Float_t wresi[3] = { .0644,.7655,.1701 }; | |
872 | ||
873 | Float_t aG10[5] = { 1.01,12.011,16.,28.085 ,79.904 }; | |
874 | Float_t zG10[5] = { 1.,6.,8.,14.,35. }; | |
875 | Float_t wG10[5] = { .02089,.22338,.28493,.41342,.05738 }; | |
876 | ||
877 | Float_t aAlCon[2] = { 14.61, 26.98}; | |
878 | Float_t zAlCon[2] = { 7.3, 13.}; | |
879 | Float_t wAlCon[2] = { .0004,.9996}; | |
880 | ||
fe4da5cc | 881 | |
882 | Float_t epsil, stmin, deemax, tmaxfd, stemax; | |
883 | ||
884 | // --- Define the various materials for GEANT --- | |
885 | // Aluminum | |
c557d782 | 886 | AliMaterial( 9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); |
fe4da5cc | 887 | AliMaterial(29, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); |
888 | AliMaterial(49, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); | |
889 | ||
890 | // Iron | |
891 | AliMaterial(10, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
892 | AliMaterial(30, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
893 | AliMaterial(50, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); | |
c557d782 | 894 | // Copper |
895 | AliMaterial(17, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1); | |
896 | AliMaterial(37, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1); | |
897 | AliMaterial(57, "COPPER$ ", 63.55, 29., 8.96, 1.43, 15.1); | |
898 | // Air | |
fe4da5cc | 899 | AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); |
900 | AliMaterial(35, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
901 | AliMaterial(55, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); | |
902 | ||
903 | // Vacuum | |
904 | AliMaterial(16, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
905 | AliMaterial(36, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
906 | AliMaterial(56, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); | |
907 | ||
908 | // stainless Steel | |
909 | AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
910 | AliMixture(39, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
911 | AliMixture(59, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); | |
912 | ||
913 | // Coil | |
914 | AliMixture(14, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
915 | AliMixture(34, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
916 | AliMixture(54, "Al$", acoil, zcoil, 2.122, 3, wcoil); | |
1b206195 | 917 | |
918 | //RESIN | |
919 | AliMixture(13, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
920 | AliMixture(33, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
921 | AliMixture(53, "RESIN$", aresi, zresi, 1.05, 3, wresi); | |
922 | ||
923 | //G10 | |
924 | AliMixture(11, "G10$", aG10, zG10, 1.7, 5, wG10); | |
925 | AliMixture(31, "G10$", aG10, zG10, 1.7, 5, wG10); | |
926 | AliMixture(51, "G10$", aG10, zG10, 1.7, 5, wG10); | |
927 | ||
928 | //Aluminium Conductor | |
929 | AliMixture(12, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
930 | AliMixture(32, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
931 | AliMixture(52, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); | |
932 | ||
fe4da5cc | 933 | // **************** |
934 | // Defines tracking media parameters. | |
935 | // Les valeurs sont commentees pour laisser le defaut | |
936 | // a GEANT (version 3-21, page CONS200), f.m. | |
937 | epsil = .001; // Tracking precision, | |
938 | stemax = -1.; // Maximum displacement for multiple scat | |
939 | tmaxfd = -20.; // Maximum angle due to field deflection | |
940 | deemax = -.3; // Maximum fractional energy loss, DLS | |
941 | stmin = -.8; | |
942 | // *************** | |
943 | ||
944 | // Aluminum | |
b43eb0dc | 945 | AliMedium(9, "ALU_C0 ", 9, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
946 | AliMedium(29, "ALU_C1 ", 29, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
947 | AliMedium(49, "ALU_C2 ", 49, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 948 | |
949 | // Iron | |
b43eb0dc | 950 | AliMedium(10, "FE_C0 ", 10, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
951 | AliMedium(30, "FE_C1 ", 30, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
952 | AliMedium(50, "FE_C2 ", 50, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 953 | |
954 | // Air | |
b43eb0dc | 955 | AliMedium(15, "AIR_C0 ", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
956 | AliMedium(35, "AIR_C1 ", 35, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
957 | AliMedium(55, "AIR_C2 ", 55, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 958 | |
959 | // Vacuum | |
b43eb0dc | 960 | AliMedium(16, "VA_C0 ", 16, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
961 | AliMedium(36, "VA_C1 ", 36, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
962 | AliMedium(56, "VA_C2 ", 56, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 963 | |
964 | // Steel | |
b43eb0dc | 965 | AliMedium(19, "ST_C0 ", 19, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
966 | AliMedium(39, "ST_C1 ", 39, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
967 | AliMedium(59, "ST_C3 ", 59, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
fe4da5cc | 968 | |
969 | // Coil | |
b43eb0dc | 970 | AliMedium(14, "Coil_C1 ", 14, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
971 | AliMedium(34, "Coil_C2 ", 34, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
972 | AliMedium(54, "Coil_C3 ", 54, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
1b206195 | 973 | |
974 | // Resin | |
b43eb0dc | 975 | AliMedium(13, "RESIN_C0 ", 13, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
976 | AliMedium(33, "RESIN_C1 ", 33, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
977 | AliMedium(53, "RESIN_C2 ", 53, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
1b206195 | 978 | |
979 | // G10 | |
b43eb0dc | 980 | AliMedium(11, "G10_C0 ", 11, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
981 | AliMedium(31, "G10_C1 ", 31, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
982 | AliMedium(51, "G10_C2 ", 51, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
1b206195 | 983 | |
984 | //Aluminium Contactor | |
b43eb0dc | 985 | AliMedium(12, "AlCond_C0 ", 12, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
986 | AliMedium(32, "AlCond_C1 ", 32, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
987 | AliMedium(52, "AlCond_C2 ", 52, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
c557d782 | 988 | |
989 | // | |
990 | // Copper | |
991 | AliMedium(17, "Cu_C0 ", 17, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
992 | AliMedium(37, "Cu_C1 ", 37, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
993 | AliMedium(57, "Cu_C2 ", 57, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); | |
994 | ||
fe4da5cc | 995 | } |
996 | ||
1b206195 | 997 | |
998 | ||
999 | ||
1000 | ||
1001 |