4c039060 |
1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
3 | * * |
4 | * Author: The ALICE Off-line Project. * |
5 | * Contributors are mentioned in the code where appropriate. * |
6 | * * |
7 | * Permission to use, copy, modify and distribute this software and its * |
8 | * documentation strictly for non-commercial purposes is hereby granted * |
9 | * without fee, provided that the above copyright notice appears in all * |
10 | * copies and that both the copyright notice and this permission notice * |
11 | * appear in the supporting documentation. The authors make no claims * |
12 | * about the suitability of this software for any purpose. It is * |
13 | * provided "as is" without express or implied warranty. * |
14 | **************************************************************************/ |
15 | |
16 | /* |
17 | $Log$ |
e094dc1b |
18 | Revision 1.11 2000/06/11 12:33:46 morsch |
19 | Coding rule violations corrected |
20 | |
b43eb0dc |
21 | Revision 1.10 2000/06/09 19:32:56 morsch |
22 | New detailed and corrected version from Galina Chabratova |
23 | |
1b206195 |
24 | Revision 1.9 2000/04/27 09:29:53 fca |
25 | Reverting to version 1.6.2 |
26 | |
d811c12b |
27 | Revision 1.6.2.1 1999/12/03 16:38:51 fca |
28 | Correct overlap in magnet |
9e8c9316 |
29 | |
e821f75f |
30 | Revision 1.6 1999/09/29 09:24:30 fca |
31 | Introduction of the Copyright and cvs Log |
32 | |
4c039060 |
33 | */ |
34 | |
fe4da5cc |
35 | /////////////////////////////////////////////////////////////////////////////// |
36 | // // |
37 | // Magnetic Dipole version 1 // |
38 | // // |
39 | //Begin_Html |
40 | /* |
d811c12b |
41 | <img src="picts/AliDIPOv2Class.gif"> |
fe4da5cc |
42 | </pre> |
43 | <br clear=left> |
44 | <font size=+2 color=red> |
45 | <p>The responsible person for this module is |
46 | <a href="mailto:andreas.morsch@cern.ch">Andreas Morsch</a>. |
47 | </font> |
48 | <pre> |
49 | */ |
50 | //End_Html |
51 | // // |
52 | // // |
fe4da5cc |
53 | |
54 | #include "AliDIPOv2.h" |
55 | #include "AliRun.h" |
fe4da5cc |
56 | #include "AliConst.h" |
57 | |
58 | ClassImp(AliDIPOv2) |
59 | |
60 | //_____________________________________________________________________________ |
1b206195 |
61 | AliDIPOv2::AliDIPOv2() |
fe4da5cc |
62 | { |
63 | // |
1b206195 |
64 | // Last design of magnetic dipole version 2 |
fe4da5cc |
65 | // |
66 | } |
67 | |
68 | //_____________________________________________________________________________ |
69 | AliDIPOv2::AliDIPOv2(const char *name, const char *title) |
70 | : AliDIPO(name,title) |
71 | { |
72 | // |
73 | // Standard constructor for the magnetic dipole version 2 |
74 | SetMarkerColor(7); |
75 | SetMarkerStyle(2); |
76 | SetMarkerSize(0.4); |
77 | } |
78 | |
79 | //_____________________________________________________________________________ |
80 | void AliDIPOv2::CreateGeometry() |
81 | { |
82 | // |
83 | // Creation of the geometry of the magnetic DIPOLE version 2 |
84 | // |
1b206195 |
85 | |
86 | // AliMC* gMC = AliMC::GetMC(); |
87 | |
e094dc1b |
88 | Float_t cpar[5], tpar[15], ypar[12]; |
fe4da5cc |
89 | Float_t dz, dx, dy; |
90 | Int_t idrotm[1899]; |
b43eb0dc |
91 | Float_t accMax, the1, phi1, the2, phi2, the3, phi3; |
d811c12b |
92 | |
1b206195 |
93 | Int_t *idtmed = fIdtmed->GetArray()-1799; |
94 | |
b43eb0dc |
95 | accMax = 9.; // ANGLE POLAIRE MAXIMUM |
1b206195 |
96 | |
fe4da5cc |
97 | // DIPOLE MAGNET |
1b206195 |
98 | |
e094dc1b |
99 | tpar[0] = 0.; |
100 | tpar[1] = 360.; |
101 | tpar[2] = 4.; |
102 | // |
103 | tpar[3] = -250.55; |
104 | tpar[4] = 144.; |
105 | tpar[5] = 527.34; |
106 | // |
107 | tpar[6] = -160.7; |
108 | tpar[7] = 144.; |
109 | tpar[8] = 527.34; |
110 | // |
111 | tpar[9] = 150.8; |
112 | tpar[10] = 193.3; |
113 | tpar[11] = 527.34; |
114 | // |
115 | tpar[12] = 250.55; |
116 | tpar[13] = 193.3; |
117 | tpar[14] = 527.34; |
118 | |
1b206195 |
119 | |
e094dc1b |
120 | gMC->Gsvolu("DDIP", "PCON", idtmed[1814], tpar, 15); |
fe4da5cc |
121 | // COILS |
fe4da5cc |
122 | // air - m.f. |
1b206195 |
123 | cpar[0] = 207.; |
124 | cpar[1] = 274.; |
125 | cpar[2] = 37.65; |
126 | cpar[3] = 119.; |
127 | cpar[4] = 241. ; |
128 | // coil - high cuts |
129 | gMC->Gsvolu("DC1 ", "TUBS", idtmed[1853], cpar, 5); |
130 | cpar[3] = -61.; |
131 | cpar[4] = 61.; |
132 | gMC->Gsvolu("DC2 ", "TUBS", idtmed[1853], cpar, 5); |
133 | |
134 | // coil - low cuts cuts |
135 | cpar[0] = 207.; |
136 | // cpar[1] = cpar[0] + 10.; |
137 | cpar[1] = 217; |
138 | cpar[3] = 119.; |
139 | cpar[4] = 241.; |
140 | |
141 | gMC->Gsvolu("DC3 ", "TUBS", idtmed[1813], cpar, 5); |
142 | cpar[0] = 207.; |
143 | cpar[1] = 217; |
144 | cpar[3] = -61.; |
145 | cpar[4] = 61.; |
146 | gMC->Gsvolu("DC4 ", "TUBS", idtmed[1813], cpar, 5); |
147 | |
cfce8870 |
148 | gMC->Gspos("DC3 ", 1, "DC1 ", 0., 0., 0., 0, "ONLY"); |
cfce8870 |
149 | gMC->Gspos("DC4 ", 1, "DC2 ", 0., 0., 0., 0, "ONLY"); |
1b206195 |
150 | |
151 | // dz = 37.65 - 243.55 |
152 | dz = -205.9-2.45; |
153 | dx = 5.; |
154 | gMC->Gspos("DC1 ", 1, "DDIP", dx, 0., dz, 0, "ONLY"); |
155 | gMC->Gspos("DC1 ", 2, "DDIP", dx, 0., -dz, 0, "ONLY"); |
156 | gMC->Gspos("DC2 ", 1, "DDIP", -dx, 0., dz, 0, "ONLY"); |
157 | gMC->Gspos("DC2 ", 2, "DDIP", -dx, 0., -dz, 0, "ONLY"); |
fe4da5cc |
158 | the1 = 180.; |
159 | phi1 = 0.; |
160 | the2 = 90.; |
1b206195 |
161 | phi2 = 151.; |
fe4da5cc |
162 | the3 = 90.; |
1b206195 |
163 | phi3 = 61.; |
fe4da5cc |
164 | AliMatrix(idrotm[1800], the1, phi1, the2, phi2, the3, phi3); |
1b206195 |
165 | phi2 = 29.; //90-61 |
fe4da5cc |
166 | the3 = -90.; |
1b206195 |
167 | phi3 = -61.; |
fe4da5cc |
168 | AliMatrix(idrotm[1801], the1, phi1, the2, phi2, the3, phi3); |
169 | the1 = 0.; |
170 | phi1 = 0.; |
171 | the2 = 90.; |
1b206195 |
172 | phi2 = 151.; |
fe4da5cc |
173 | the3 = 90.; |
1b206195 |
174 | phi3 = 61.; |
fe4da5cc |
175 | AliMatrix(idrotm[1802], the1, phi1, the2, phi2, the3, phi3); |
1b206195 |
176 | phi2 = 29.; |
fe4da5cc |
177 | the3 = -90.; |
1b206195 |
178 | phi3 = -61.; |
fe4da5cc |
179 | AliMatrix(idrotm[1803], the1, phi1, the2, phi2, the3, phi3); |
1b206195 |
180 | |
fe4da5cc |
181 | cpar[0] = 25.; |
1b206195 |
182 | cpar[1] = 100.3; //25+75.3 |
183 | cpar[2] = 33.5; |
fe4da5cc |
184 | cpar[3] = 270.; |
185 | cpar[4] = 360.; |
1b206195 |
186 | //* coil high cuts |
187 | gMC->Gsvolu("DC11", "TUBS", idtmed[1853], cpar, 5); |
188 | |
189 | dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad) ; |
190 | dy = TMath::Cos(30.5*kDegrad) * -(207.+33.5); |
191 | dz = cpar[1] - 243.55-2.45; |
cfce8870 |
192 | gMC->Gspos("DC11", 1, "DDIP", dx, dy, dz, idrotm[1800], "ONLY"); |
193 | gMC->Gspos("DC11", 2, "DDIP", dx, dy, -dz, idrotm[1802], "ONLY"); |
194 | gMC->Gspos("DC11", 3, "DDIP", -dx, dy, dz, idrotm[1801], "ONLY"); |
195 | gMC->Gspos("DC11", 4, "DDIP", -dx, dy, -dz, idrotm[1803], "ONLY"); |
1b206195 |
196 | |
197 | |
198 | |
199 | //* ... higher cuts |
fe4da5cc |
200 | cpar[0] = 25.; |
1b206195 |
201 | cpar[1] = 100.3; //25+75.3 |
202 | cpar[2] = 33.5; |
fe4da5cc |
203 | cpar[3] = 0.; |
204 | cpar[4] = 90.; |
1b206195 |
205 | //* coil high cuts |
206 | gMC->Gsvolu("DC12", "TUBS", idtmed[1853], cpar, 5); |
207 | |
208 | dx = TMath::Sin(30.5*kDegrad) * -(207.+33.5)+5./TMath::Sin(30.5*kDegrad) ; |
209 | dy = TMath::Cos(30.5*kDegrad) *(207.+33.5); |
210 | dz = cpar[1] - 243.55-2.45; |
cfce8870 |
211 | gMC->Gspos("DC12", 1, "DDIP", dx, dy, dz, idrotm[1801], "ONLY"); |
212 | gMC->Gspos("DC12", 2, "DDIP", dx, dy, -dz, idrotm[1803], "ONLY"); |
213 | gMC->Gspos("DC12", 3, "DDIP", -dx, dy, dz, idrotm[1800], "ONLY"); |
214 | gMC->Gspos("DC12", 4, "DDIP", -dx, dy, -dz, idrotm[1802], "ONLY"); |
1b206195 |
215 | |
fe4da5cc |
216 | the1 = 90.; |
1b206195 |
217 | phi1 = 61.; |
fe4da5cc |
218 | the2 = 90.; |
1b206195 |
219 | phi2 = 151.; |
fe4da5cc |
220 | the3 = 0.; |
221 | phi3 = 0.; |
222 | AliMatrix(idrotm[1804], the1, phi1, the2, phi2, the3, phi3); |
223 | the1 = 90.; |
1b206195 |
224 | phi1 = -61.; |
fe4da5cc |
225 | the2 = 90.; |
1b206195 |
226 | phi2 = -151.; |
fe4da5cc |
227 | AliMatrix(idrotm[1805], the1, phi1, the2, phi2, the3, phi3); |
1b206195 |
228 | the1 = 90.; |
229 | phi1 = 119.; //180 -61 |
230 | the2 = 90.; |
231 | phi2 = 209.; //270-61 |
232 | AliMatrix(idrotm[1806], the1, phi1, the2, phi2, the3, phi3); |
233 | the1 = 90.; |
234 | phi1 = -119.; |
235 | the2 = 90.; |
236 | phi2 = -209.; |
237 | AliMatrix(idrotm[1807], the1, phi1, the2, phi2, the3, phi3); |
238 | |
239 | //* coil - high cuts |
240 | |
241 | tpar[0] = 37.65; |
242 | tpar[1] = 33.5; |
243 | tpar[2] = 145.5; |
244 | gMC->Gsvolu("DL1 ", "BOX ", idtmed[1853], tpar, 3); |
245 | |
246 | // coil - low cuts |
247 | |
248 | tpar[0] = 5.; |
249 | dx = 37.65 - 5.; |
250 | gMC->Gsvolu("DL2 ", "BOX ", idtmed[1813], tpar, 3); |
251 | gMC->Gspos("DL2 ", 1, "DL1 ", dx, 0., 0., 0, "ONLY"); |
252 | |
253 | dx =-53.62; |
254 | dy =-241.26819; |
255 | dz = 0.0; |
cfce8870 |
256 | gMC->Gspos("DL1 ", 1, "DDIP", dx, dy, dz, idrotm[1804], "ONLY"); |
257 | gMC->Gspos("DL1 ", 2, "DDIP", dx, -dy, dz, idrotm[1805], "ONLY"); |
1b206195 |
258 | gMC->Gspos("DL1 ", 3, "DDIP",-dx, dy, dz, idrotm[1806], "ONLY"); |
259 | gMC->Gspos("DL1 ", 4, "DDIP",-dx, -dy, dz, idrotm[1807], "ONLY"); |
260 | |
261 | // Contactor |
262 | |
263 | // high cuts |
264 | |
265 | //Steel outer face planes |
266 | |
267 | cpar[0] = 207.-18.6; |
268 | cpar[1] = 274.+18.6; |
269 | cpar[2] = 1.; |
270 | cpar[3] = -50.; |
271 | cpar[4] = 50.; |
272 | |
273 | gMC->Gsvolu("DCO1", "TUBS", idtmed[1818], cpar, 5); |
274 | dx = -5.; |
275 | dz = 168.25-1.5-1.; |
276 | gMC->Gspos("DCO1", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
277 | dz = 243.55+4.5+1.5+1.; |
278 | gMC->Gspos("DCO1", 2, "DDIP", dx, 0, dz, 0, "ONLY"); |
d811c12b |
279 | |
1b206195 |
280 | // 9.06.2000 |
281 | |
282 | // cpar[0] = 207.-18.6; |
283 | // cpar[1] = 274.+18.6; |
284 | // cpar[2] = 1.; |
285 | cpar[3] = 180.-50.; |
286 | cpar[4] = 180.+50.; |
287 | |
288 | gMC->Gsvolu("DCO2", "TUBS", idtmed[1818], cpar, 5); |
289 | dx = +5.; |
290 | dz = 168.25-1.5-1.; |
291 | gMC->Gspos("DCO2", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
292 | dz = 243.55+4.5+1.5+1.; |
293 | gMC->Gspos("DCO2", 2, "DDIP", dx, 0, dz, 0, "ONLY"); |
294 | |
295 | |
296 | |
297 | // Resin face planes |
298 | |
299 | cpar[0] = 207.; |
300 | cpar[1] = 274.; |
301 | cpar[2] = .75; |
302 | cpar[3] = -50.; |
303 | cpar[4] = 50.; |
304 | |
305 | gMC->Gsvolu("DCO3", "TUBS", idtmed[1812], cpar, 5); |
306 | dx = -5; |
307 | dz = 168.25-0.75; |
308 | gMC->Gspos("DCO3", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
309 | dz = 243.55+4.5+0.75; |
310 | gMC->Gspos("DCO3", 2, "DDIP", dx, 0, dz, 0, "ONLY"); |
311 | |
312 | // 9.06.2000 |
313 | |
314 | cpar[3] = 180.-50.; |
315 | cpar[4] = 180.+50.; |
316 | gMC->Gsvolu("DCO4", "TUBS", idtmed[1812], cpar, 5); |
317 | dx = +5; |
318 | dz = 168.25-0.75; |
319 | gMC->Gspos("DCO4", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
320 | dz = 243.55+4.5+0.75; |
321 | gMC->Gspos("DCO4", 2, "DDIP", dx, 0, dz, 0, "ONLY"); |
322 | |
323 | |
324 | // G10 face plane |
325 | |
326 | cpar[0] = 207.; |
327 | cpar[1] = 274.; |
328 | cpar[2] = 2.25; |
329 | cpar[3] = -50.; |
330 | cpar[4] = 50.; |
331 | |
332 | gMC->Gsvolu("DCO5", "TUBS", idtmed[1810], cpar, 5); |
333 | |
334 | dx = -5; |
335 | dz = 243.55+2.25; |
336 | gMC->Gspos("DCO5", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
337 | |
338 | // 9.06.2000 |
339 | |
340 | cpar[3] = 180.-50.; |
341 | cpar[4] = 180.+50.; |
342 | |
343 | gMC->Gsvolu("DCO6", "TUBS", idtmed[1810], cpar, 5); |
344 | |
345 | dx = +5; |
346 | dz = 243.55+2.25; |
347 | gMC->Gspos("DCO6", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
348 | |
349 | //Steel supported planes |
350 | |
351 | cpar[0] = 274.+1.5+2.; |
352 | cpar[1] = 274.+18.6; |
353 | cpar[2] = 1.; |
354 | cpar[3] = -50.; |
355 | cpar[4] = 50.; |
356 | |
357 | gMC->Gsvolu("DCO7", "TUBS", idtmed[1818], cpar, 5); |
358 | |
359 | dx = -5; |
360 | dz = 168.25+1.; |
361 | gMC->Gspos("DCO7", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
362 | |
363 | // 9.06.2000 |
364 | cpar[0] = 274.+1.5+2.; |
365 | cpar[1] = 274.+18.6; |
366 | cpar[2] = 1.; |
367 | cpar[3] = 180.-50.; |
368 | cpar[4] = 180.+50.; |
369 | |
370 | |
371 | gMC->Gsvolu("DCO8", "TUBS", idtmed[1818], cpar, 5); |
372 | |
373 | dx = +5; |
374 | dz = 168.25+1.; |
375 | gMC->Gspos("DCO8", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
376 | |
377 | // |
378 | |
379 | cpar[0] = 207.- 18.6; |
380 | cpar[1] = 207.- 2.- 1.5; |
381 | cpar[2] = 1.; |
382 | cpar[3] = -50.; |
383 | cpar[4] = 50.; |
384 | |
385 | gMC->Gsvolu("DCO9", "TUBS", idtmed[1818], cpar, 5); |
386 | |
387 | dx = -5; |
388 | dz = 168.25+1.; |
389 | gMC->Gspos("DCO9", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
390 | |
391 | // 9.06.2000 |
392 | |
393 | cpar[0] = 207.- 18.6; |
394 | cpar[1] = 207.- 2.- 1.5; |
395 | cpar[2] = 1.; |
396 | cpar[3] = 180.-50.; |
397 | cpar[4] = 180.+50.; |
398 | |
399 | gMC->Gsvolu("DCOA", "TUBS", idtmed[1818], cpar, 5); |
400 | |
401 | dx = +5; |
402 | dz = 168.25+1.; |
403 | gMC->Gspos("DCOA", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
404 | |
405 | |
406 | // Sides steel planes |
407 | |
408 | cpar[0] = 207. - 1.5 -2.; |
409 | cpar[1] = 207. - 1.5 ; |
410 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; |
411 | cpar[3] = -50.; |
412 | cpar[4] = 50.; |
413 | |
414 | gMC->Gsvolu("DCOB", "TUBS", idtmed[1818], cpar, 5); |
415 | |
416 | cpar[0] = 274. + 1.5; |
417 | cpar[1] = 274. + 1.5 +2.; |
418 | |
419 | gMC->Gsvolu("DCOC", "TUBS", idtmed[1818], cpar, 5); |
420 | |
421 | dx=-5.; |
422 | dz = ((243.55+4.5+1.5)+168.25)/2; |
423 | gMC->Gspos("DCOB", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
424 | gMC->Gspos("DCOC", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
425 | |
426 | // 9.06.2000 |
427 | |
428 | cpar[0] = 207. - 1.5 -2.; |
429 | cpar[1] = 207. - 1.5 ; |
430 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; |
431 | cpar[3] = 180.-50.; |
432 | cpar[4] = 180.+50.; |
433 | |
434 | gMC->Gsvolu("DCOD", "TUBS", idtmed[1818], cpar, 5); |
435 | |
436 | cpar[0] = 274. + 1.5; |
437 | cpar[1] = 274. + 1.5 +2.; |
438 | |
439 | gMC->Gsvolu("DCOE", "TUBS", idtmed[1818], cpar, 5); |
440 | |
441 | dx=+5.; |
442 | dz = ((243.55+4.5+1.5)+168.25)/2; |
443 | gMC->Gspos("DCOD", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
444 | gMC->Gspos("DCOE", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
445 | |
446 | |
447 | // Top and bottom resin planes |
448 | |
449 | cpar[0] = 207. - 1.5 ; |
450 | cpar[1] = 207. ; |
451 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; |
452 | cpar[3] = -50.; |
453 | cpar[4] = 50.; |
454 | |
455 | gMC->Gsvolu("DCOF", "TUBS", idtmed[1812], cpar, 5); |
456 | |
457 | cpar[0] = 274.; |
458 | cpar[1] = 274. + 1.5; |
459 | |
460 | gMC->Gsvolu("DCOG", "TUBS", idtmed[1812], cpar, 5); |
461 | |
462 | |
463 | dx=-5.; |
464 | dz = ((243.55+4.5+1.5)+168.25)/2; |
465 | gMC->Gspos("DCOF", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
466 | gMC->Gspos("DCOG", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
467 | |
468 | // 9.06.2000 |
469 | cpar[0] = 207. - 1.5 ; |
470 | cpar[1] = 207. ; |
471 | cpar[2] = ((243.55+4.5+1.5)-168.25)/2; |
472 | |
473 | cpar[3] = 180.-50.; |
474 | cpar[4] = 180.+50.; |
475 | |
476 | gMC->Gsvolu("DCOH", "TUBS", idtmed[1812], cpar, 5); |
477 | |
478 | cpar[0] = 274.; |
479 | cpar[1] = 274. + 1.5; |
480 | |
481 | gMC->Gsvolu("DCOI", "TUBS", idtmed[1812], cpar, 5); |
482 | |
483 | |
484 | dx=+5.; |
485 | dz = ((243.55+4.5+1.5)+168.25)/2; |
486 | gMC->Gspos("DCOH", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
487 | gMC->Gspos("DCOI", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
488 | |
489 | |
490 | // Aluminum cabels |
491 | |
492 | cpar[0] = 274. + 1.5 +2.; |
493 | cpar[1] = 274. + 1.5 +2. + 80.; |
494 | cpar[2] = 5.05/2; |
495 | cpar[3] = -24.; |
496 | cpar[4] = 24.; |
497 | |
498 | gMC->Gsvolu("DCOJ", "TUBS", idtmed[1811], cpar, 5); |
499 | |
500 | // dx = 274. + 1.5 +2. +40.; |
501 | // dx = 5. + 1.5 +2. +40.; |
502 | // dx = 5. + 1.5 +2.; |
503 | dx=-5.; |
504 | dz = 168.25 + 5.05 + 5.05/2; |
505 | gMC->Gspos("DCOJ", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
506 | |
507 | dz = 243.55 - 5.05/2; |
508 | gMC->Gspos("DCOJ", 2, "DDIP", dx, 0, dz, 0, "ONLY"); |
509 | |
510 | // 9.06.2000 |
511 | |
512 | cpar[3] = 180.-24.; |
513 | cpar[4] = 180.+24.; |
514 | |
515 | gMC->Gsvolu("DCOK", "TUBS", idtmed[1811], cpar, 5); |
516 | |
517 | // dx = 274. + 1.5 +2. +40.; |
518 | // dx = 5. + 1.5 +2. +40.; |
519 | // dx = 5. + 1.5 +2.; |
520 | dx=+5.; |
521 | dz = 168.25 + 5.05 + 5.05/2; |
522 | gMC->Gspos("DCOK", 1, "DDIP", dx, 0, dz, 0, "ONLY"); |
523 | |
524 | dz = 243.55 - 5.05/2; |
525 | gMC->Gspos("DCOK", 2, "DDIP", dx, 0, dz, 0, "ONLY"); |
526 | |
527 | |
fe4da5cc |
528 | // YOKE |
1b206195 |
529 | |
530 | // Top and bottom blocks |
531 | ypar[0] = 298.1 ; |
532 | ypar[1] = 69.5; |
533 | ypar[2] = 155.75; |
534 | |
535 | // iron- high cuts |
536 | gMC->Gsvolu("DY1 ", "BOX ", idtmed[1858], ypar, 3); |
537 | ypar[0] = 144.+10. ; |
538 | ypar[1] = 193.3+10.; |
fe4da5cc |
539 | ypar[2] = 5.; |
1b206195 |
540 | ypar[3] = 155.75; |
541 | dy = -69.5 + 5.; |
542 | // iron- low cuts |
543 | gMC->Gsvolu("DY11", "TRD1", idtmed[1818], ypar, 4); |
544 | gMC->Gspos("DY11", 1, "DY1 ", 0., dy, 0., 0, "ONLY"); |
545 | |
546 | dy = 365.5; |
547 | dz = 4.95; |
548 | gMC->Gspos("DY1 ", 1, "DDIP", 0., dy, -dz, 0, "ONLY"); |
549 | |
550 | the1 = 270.; |
fe4da5cc |
551 | phi1 = 0.; |
1b206195 |
552 | the2 = 270.; |
fe4da5cc |
553 | phi2 = 90.; |
1b206195 |
554 | the3 = 0.; |
fe4da5cc |
555 | phi3 = 0.; |
1b206195 |
556 | AliMatrix(idrotm[1808], the1, phi1, the2, phi2, the3, phi3); |
557 | gMC->Gspos("DY1 ", 2, "DDIP", 0., -dy, -dz, idrotm[1808] , "ONLY"); |
558 | |
559 | // side walls |
560 | // ypar[0] = 579./2. ; |
561 | ypar[0] = 296. ; |
562 | ypar[1] = 0.; |
563 | ypar[2] = 0.; |
564 | ypar[3] = 155.75; |
565 | ypar[4] = 47.9 ; |
566 | ypar[5] = 72.55; |
567 | ypar[6] = 4.3058039629 ; |
568 | // z+ |
569 | ypar[7] = 155.75; |
570 | ypar[8] = 47.9 ; |
571 | ypar[9] = 72.55; |
572 | ypar[10] = 4.3058039629 ; |
573 | |
574 | // iron - high cuts |
575 | |
576 | gMC->Gsvolu("DY2 ", "TRAP", idtmed[1858], ypar,11); |
577 | |
578 | ypar[4] = 47.9 -5.; |
579 | ypar[5] = 72.55 -5.; |
580 | |
581 | ypar[8] = 47.9 -5.; |
582 | ypar[9] = 72.55 -5.; |
583 | |
584 | |
585 | // iron - low cuts |
586 | |
587 | gMC->Gsvolu("DY22", "TRAP", idtmed[1818], ypar,11); |
588 | |
589 | dy = 0.; |
590 | dx = -5.; |
591 | |
592 | gMC->Gspos("DY22", 1, "DY2 ", dx, dy, 0., 0, "ONLY"); |
593 | |
594 | the1 = 90.; |
595 | phi1 = 180.; |
596 | the2 = 180.; |
597 | phi2 = 180.; |
598 | the3 = 90.; |
599 | phi3 = 90.; |
600 | AliMatrix(idrotm[1809], the1, phi1, the2, phi2, the3, phi3); |
601 | |
602 | the1 = 90.; |
fe4da5cc |
603 | phi1 = 0.; |
1b206195 |
604 | the2 = 180.; |
605 | phi2 = 0.; |
606 | the3 = 90. ; |
607 | phi3 = 90.; |
608 | AliMatrix(idrotm[1810], the1, phi1, the2, phi2, the3, phi3); |
609 | |
610 | dx = 228.875; |
611 | dz = - 4.95; |
612 | gMC->Gspos("DY2 ", 1, "DDIP", dx, 0.0, dz, idrotm[1809], "ONLY"); |
613 | gMC->Gspos("DY2 ", 2, "DDIP", -dx, 0.0, dz, idrotm[1810], "ONLY"); |
614 | |
615 | dz=975.; |
616 | gMC->Gspos("DDIP", 1, "ALIC", 0., 0., dz, 0, "ONLY"); |
617 | |
cfce8870 |
618 | gMC->Gsatt("DDIP", "SEEN", 0); |
1b206195 |
619 | // gMC->Gsatt("DC21", "SEEN", 0); |
620 | // gMC->Gsatt("DC22", "SEEN", 0); |
621 | // gMC->Gsatt("DC3 ", "SEEN", 0); |
622 | // gMC->Gsatt("DC4 ", "SEEN", 0); |
fe4da5cc |
623 | } |
624 | |
625 | //_____________________________________________________________________________ |
b8032157 |
626 | void AliDIPOv2::DrawModule() |
fe4da5cc |
627 | { |
628 | // |
629 | // Draw a shaded view of the muon absorber |
630 | // |
631 | |
1b206195 |
632 | AliMC* gMC = AliMC::GetMC(); |
633 | |
fe4da5cc |
634 | // Set everything unseen |
cfce8870 |
635 | gMC->Gsatt("*", "seen", -1); |
fe4da5cc |
636 | // |
637 | // Set ALIC mother transparent |
cfce8870 |
638 | gMC->Gsatt("ALIC","SEEN",0); |
fe4da5cc |
639 | // |
640 | // Set the volumes visible |
cfce8870 |
641 | gMC->Gsatt("DDIP","seen",0); |
642 | gMC->Gsatt("DC1 ","seen",1); |
643 | gMC->Gsatt("DC2 ","seen",1); |
644 | gMC->Gsatt("DC3 ","seen",1); |
645 | gMC->Gsatt("DC4 ","seen",1); |
646 | gMC->Gsatt("DC11","seen",1); |
647 | gMC->Gsatt("DC21","seen",1); |
648 | gMC->Gsatt("DC12","seen",1); |
649 | gMC->Gsatt("DC22","seen",1); |
650 | gMC->Gsatt("DL1 ","seen",1); |
651 | gMC->Gsatt("DL2 ","seen",1); |
652 | gMC->Gsatt("DY1 ","seen",1); |
653 | gMC->Gsatt("DY2 ","seen",1); |
654 | gMC->Gsatt("DYL ","seen",1); |
655 | gMC->Gsatt("DY3 ","seen",1); |
1b206195 |
656 | // gMC->Gsatt("DY4 ","seen",1); |
657 | // gMC->Gsatt("DY5 ","seen",1); |
658 | // gMC->Gsatt("DY6 ","seen",1); |
659 | // gMC->Gsatt("DY7 ","seen",1); |
fe4da5cc |
660 | // |
cfce8870 |
661 | gMC->Gdopt("hide", "on"); |
662 | gMC->Gdopt("shad", "on"); |
663 | gMC->Gsatt("*", "fill", 7); |
664 | gMC->SetClipBox("."); |
665 | gMC->SetClipBox("."); |
666 | gMC->DefaultRange(); |
667 | gMC->Gdraw("alic", 30, 30, 0, 17, 13.5, .019, .019); |
668 | gMC->Gdhead(1111, "Magnetic Dipole Version 2"); |
669 | gMC->Gdman(16, 4, "MAN"); |
fe4da5cc |
670 | } |
671 | |
672 | //_____________________________________________________________________________ |
673 | void AliDIPOv2::CreateMaterials() |
674 | { |
675 | // |
676 | // Create Materials for Magnetic Dipole version 2 |
677 | // |
678 | |
b43eb0dc |
679 | Int_t isxfld = gAlice->Field()->Integ(); |
680 | Float_t sxmgmx = gAlice->Field()->Max(); |
fe4da5cc |
681 | |
682 | Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 }; |
683 | Float_t zsteel[4] = { 26.,24.,28.,14. }; |
684 | Float_t wsteel[4] = { .715,.18,.1,.005 }; |
1b206195 |
685 | |
fe4da5cc |
686 | Float_t acoil[3] = { 26.98,1.01,16. }; |
687 | Float_t zcoil[3] = { 13.,1.,8. }; |
688 | Float_t wcoil[3] = { .66,.226,.114 }; |
1b206195 |
689 | |
690 | Float_t aresi[3] = { 1.01,12.011,16.}; |
691 | Float_t zresi[3] = { 1.,6.,8. }; |
692 | Float_t wresi[3] = { .0644,.7655,.1701 }; |
693 | |
694 | Float_t aG10[5] = { 1.01,12.011,16.,28.085 ,79.904 }; |
695 | Float_t zG10[5] = { 1.,6.,8.,14.,35. }; |
696 | Float_t wG10[5] = { .02089,.22338,.28493,.41342,.05738 }; |
697 | |
698 | Float_t aAlCon[2] = { 14.61, 26.98}; |
699 | Float_t zAlCon[2] = { 7.3, 13.}; |
700 | Float_t wAlCon[2] = { .0004,.9996}; |
701 | |
fe4da5cc |
702 | |
703 | Float_t epsil, stmin, deemax, tmaxfd, stemax; |
704 | |
705 | // --- Define the various materials for GEANT --- |
706 | // Aluminum |
707 | AliMaterial(9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); |
708 | AliMaterial(29, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); |
709 | AliMaterial(49, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); |
710 | |
711 | // Iron |
712 | AliMaterial(10, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); |
713 | AliMaterial(30, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); |
714 | AliMaterial(50, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1); |
715 | |
716 | // Air |
717 | AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); |
718 | AliMaterial(35, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); |
719 | AliMaterial(55, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); |
720 | |
721 | // Vacuum |
722 | AliMaterial(16, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); |
723 | AliMaterial(36, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); |
724 | AliMaterial(56, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16); |
725 | |
726 | // stainless Steel |
727 | AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); |
728 | AliMixture(39, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); |
729 | AliMixture(59, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel); |
730 | |
731 | // Coil |
732 | AliMixture(14, "Al$", acoil, zcoil, 2.122, 3, wcoil); |
733 | AliMixture(34, "Al$", acoil, zcoil, 2.122, 3, wcoil); |
734 | AliMixture(54, "Al$", acoil, zcoil, 2.122, 3, wcoil); |
1b206195 |
735 | |
736 | //RESIN |
737 | AliMixture(13, "RESIN$", aresi, zresi, 1.05, 3, wresi); |
738 | AliMixture(33, "RESIN$", aresi, zresi, 1.05, 3, wresi); |
739 | AliMixture(53, "RESIN$", aresi, zresi, 1.05, 3, wresi); |
740 | |
741 | //G10 |
742 | AliMixture(11, "G10$", aG10, zG10, 1.7, 5, wG10); |
743 | AliMixture(31, "G10$", aG10, zG10, 1.7, 5, wG10); |
744 | AliMixture(51, "G10$", aG10, zG10, 1.7, 5, wG10); |
745 | |
746 | //Aluminium Conductor |
747 | AliMixture(12, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); |
748 | AliMixture(32, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); |
749 | AliMixture(52, "AlCond$", aAlCon, zAlCon, 1.3506, 2, wAlCon); |
750 | |
fe4da5cc |
751 | // **************** |
752 | // Defines tracking media parameters. |
753 | // Les valeurs sont commentees pour laisser le defaut |
754 | // a GEANT (version 3-21, page CONS200), f.m. |
755 | epsil = .001; // Tracking precision, |
756 | stemax = -1.; // Maximum displacement for multiple scat |
757 | tmaxfd = -20.; // Maximum angle due to field deflection |
758 | deemax = -.3; // Maximum fractional energy loss, DLS |
759 | stmin = -.8; |
760 | // *************** |
761 | |
762 | // Aluminum |
b43eb0dc |
763 | AliMedium(9, "ALU_C0 ", 9, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
764 | AliMedium(29, "ALU_C1 ", 29, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
765 | AliMedium(49, "ALU_C2 ", 49, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc |
766 | |
767 | // Iron |
b43eb0dc |
768 | AliMedium(10, "FE_C0 ", 10, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
769 | AliMedium(30, "FE_C1 ", 30, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
770 | AliMedium(50, "FE_C2 ", 50, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc |
771 | |
772 | // Air |
b43eb0dc |
773 | AliMedium(15, "AIR_C0 ", 15, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
774 | AliMedium(35, "AIR_C1 ", 35, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
775 | AliMedium(55, "AIR_C2 ", 55, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc |
776 | |
777 | // Vacuum |
b43eb0dc |
778 | AliMedium(16, "VA_C0 ", 16, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
779 | AliMedium(36, "VA_C1 ", 36, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
780 | AliMedium(56, "VA_C2 ", 56, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc |
781 | |
782 | // Steel |
b43eb0dc |
783 | AliMedium(19, "ST_C0 ", 19, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
784 | AliMedium(39, "ST_C1 ", 39, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
785 | AliMedium(59, "ST_C3 ", 59, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc |
786 | |
787 | // Coil |
b43eb0dc |
788 | AliMedium(14, "Coil_C1 ", 14, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
789 | AliMedium(34, "Coil_C2 ", 34, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
790 | AliMedium(54, "Coil_C3 ", 54, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
1b206195 |
791 | |
792 | // Resin |
b43eb0dc |
793 | AliMedium(13, "RESIN_C0 ", 13, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
794 | AliMedium(33, "RESIN_C1 ", 33, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
795 | AliMedium(53, "RESIN_C2 ", 53, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
1b206195 |
796 | |
797 | // G10 |
b43eb0dc |
798 | AliMedium(11, "G10_C0 ", 11, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
799 | AliMedium(31, "G10_C1 ", 31, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
800 | AliMedium(51, "G10_C2 ", 51, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
1b206195 |
801 | |
802 | //Aluminium Contactor |
b43eb0dc |
803 | AliMedium(12, "AlCond_C0 ", 12, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
804 | AliMedium(32, "AlCond_C1 ", 32, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
805 | AliMedium(52, "AlCond_C2 ", 52, 0, isxfld, sxmgmx, tmaxfd, stemax, deemax, epsil, stmin); |
fe4da5cc |
806 | } |
807 | |
1b206195 |
808 | |
809 | |
810 | |
811 | |
812 | |