| 829fb838 |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| 16 | /* $Id$ */ |
| 17 | |
| 18 | // |
| 19 | // Realisation of the TVirtualMC interface for the FLUKA code |
| 20 | // (See official web side http://www.fluka.org/). |
| 21 | // |
| 22 | // This implementation makes use of the TGeo geometry modeller. |
| 23 | // User configuration is via automatic generation of FLUKA input cards. |
| 24 | // |
| 25 | // Authors: |
| 26 | // A. Fasso |
| 27 | // E. Futo |
| 28 | // A. Gheata |
| 29 | // A. Morsch |
| 30 | // |
| 31 | |
| 32 | #include <Riostream.h> |
| 33 | |
| 829fb838 |
34 | #include "TFluka.h" |
| 35 | #include "TCallf77.h" //For the fortran calls |
| 36 | #include "Fdblprc.h" //(DBLPRC) fluka common |
| 37 | #include "Fepisor.h" //(EPISOR) fluka common |
| 07f5b33e |
38 | #include "Ffinuc.h" //(FINUC) fluka common |
| 829fb838 |
39 | #include "Fiounit.h" //(IOUNIT) fluka common |
| 40 | #include "Fpaprop.h" //(PAPROP) fluka common |
| 41 | #include "Fpart.h" //(PART) fluka common |
| 42 | #include "Ftrackr.h" //(TRACKR) fluka common |
| 43 | #include "Fpaprop.h" //(PAPROP) fluka common |
| 44 | #include "Ffheavy.h" //(FHEAVY) fluka common |
| 3a625972 |
45 | #include "Fopphst.h" //(OPPHST) fluka common |
| 07f5b33e |
46 | #include "Fstack.h" //(STACK) fluka common |
| 47 | #include "Fstepsz.h" //(STEPSZ) fluka common |
| 7b203b6e |
48 | #include "Fopphst.h" //(OPPHST) fluka common |
| 829fb838 |
49 | |
| 50 | #include "TVirtualMC.h" |
| 3a625972 |
51 | #include "TMCProcess.h" |
| 829fb838 |
52 | #include "TGeoManager.h" |
| 53 | #include "TGeoMaterial.h" |
| 54 | #include "TGeoMedium.h" |
| 55 | #include "TFlukaMCGeometry.h" |
| 6f5667d1 |
56 | #include "TGeoMCGeometry.h" |
| 829fb838 |
57 | #include "TFlukaCerenkov.h" |
| 1df5fa54 |
58 | #include "TFlukaConfigOption.h" |
| b496f27c |
59 | #include "TFlukaScoringOption.h" |
| 829fb838 |
60 | #include "TLorentzVector.h" |
| b496f27c |
61 | #include "TArrayI.h" |
| 829fb838 |
62 | |
| 63 | // Fluka methods that may be needed. |
| 64 | #ifndef WIN32 |
| 65 | # define flukam flukam_ |
| 66 | # define fluka_openinp fluka_openinp_ |
| 67 | # define fluka_closeinp fluka_closeinp_ |
| 68 | # define mcihad mcihad_ |
| 69 | # define mpdgha mpdgha_ |
| eea53470 |
70 | # define newplo newplo_ |
| 829fb838 |
71 | #else |
| 72 | # define flukam FLUKAM |
| 73 | # define fluka_openinp FLUKA_OPENINP |
| 74 | # define fluka_closeinp FLUKA_CLOSEINP |
| 75 | # define mcihad MCIHAD |
| 76 | # define mpdgha MPDGHA |
| eea53470 |
77 | # define newplo NEWPLO |
| 829fb838 |
78 | #endif |
| 79 | |
| 80 | extern "C" |
| 81 | { |
| 82 | // |
| 83 | // Prototypes for FLUKA functions |
| 84 | // |
| 85 | void type_of_call flukam(const int&); |
| eea53470 |
86 | void type_of_call newplo(); |
| 829fb838 |
87 | void type_of_call fluka_openinp(const int&, DEFCHARA); |
| 88 | void type_of_call fluka_closeinp(const int&); |
| 89 | int type_of_call mcihad(const int&); |
| 90 | int type_of_call mpdgha(const int&); |
| 91 | } |
| 92 | |
| 93 | // |
| 94 | // Class implementation for ROOT |
| 95 | // |
| 96 | ClassImp(TFluka) |
| 97 | |
| 98 | // |
| 99 | //---------------------------------------------------------------------------- |
| 100 | // TFluka constructors and destructors. |
| 101 | //______________________________________________________________________________ |
| 102 | TFluka::TFluka() |
| 103 | :TVirtualMC(), |
| 104 | fVerbosityLevel(0), |
| 1df5fa54 |
105 | fInputFileName(""), |
| fb2cbbec |
106 | fUserConfig(0), |
| 1df5fa54 |
107 | fUserScore(0) |
| 829fb838 |
108 | { |
| 109 | // |
| 110 | // Default constructor |
| 111 | // |
| 112 | fGeneratePemf = kFALSE; |
| 113 | fNVolumes = 0; |
| 114 | fCurrentFlukaRegion = -1; |
| 115 | fGeom = 0; |
| 116 | fMCGeo = 0; |
| 117 | fMaterials = 0; |
| 118 | fDummyBoundary = 0; |
| 119 | fFieldFlag = 1; |
| bd3d5c8a |
120 | fStopped = 0; |
| b496f27c |
121 | fStopEvent = 0; |
| 122 | fStopRun = 0; |
| 123 | fNEvent = 0; |
| 829fb838 |
124 | } |
| 125 | |
| 126 | //______________________________________________________________________________ |
| 127 | TFluka::TFluka(const char *title, Int_t verbosity, Bool_t isRootGeometrySupported) |
| 128 | :TVirtualMC("TFluka",title, isRootGeometrySupported), |
| 129 | fVerbosityLevel(verbosity), |
| 130 | fInputFileName(""), |
| 131 | fTrackIsEntering(0), |
| 132 | fTrackIsExiting(0), |
| 1df5fa54 |
133 | fTrackIsNew(0), |
| fb2cbbec |
134 | fUserConfig(new TObjArray(100)), |
| 1df5fa54 |
135 | fUserScore(new TObjArray(100)) |
| 829fb838 |
136 | { |
| 137 | // create geometry interface |
| 7f13be31 |
138 | if (fVerbosityLevel >=3) |
| 139 | cout << "<== TFluka::TFluka(" << title << ") constructor called." << endl; |
| 140 | SetCoreInputFileName(); |
| 141 | SetInputFileName(); |
| 142 | SetGeneratePemf(kFALSE); |
| 829fb838 |
143 | fNVolumes = 0; |
| 144 | fCurrentFlukaRegion = -1; |
| 145 | fDummyBoundary = 0; |
| 146 | fFieldFlag = 1; |
| 147 | fGeneratePemf = kFALSE; |
| 148 | fMCGeo = new TGeoMCGeometry("MCGeo", "TGeo Implementation of VirtualMCGeometry", kTRUE); |
| fb2cbbec |
149 | fGeom = new TFlukaMCGeometry("geom", "FLUKA VMC Geometry"); |
| 829fb838 |
150 | if (verbosity > 2) fGeom->SetDebugMode(kTRUE); |
| 151 | fMaterials = 0; |
| bd3d5c8a |
152 | fStopped = 0; |
| b496f27c |
153 | fStopEvent = 0; |
| 154 | fStopRun = 0; |
| 155 | fNEvent = 0; |
| 829fb838 |
156 | } |
| 157 | |
| 158 | //______________________________________________________________________________ |
| 159 | TFluka::~TFluka() { |
| 160 | // Destructor |
| 1df5fa54 |
161 | if (fVerbosityLevel >=3) |
| 162 | cout << "<== TFluka::~TFluka() destructor called." << endl; |
| 163 | |
| 164 | delete fGeom; |
| 165 | delete fMCGeo; |
| 166 | |
| fb2cbbec |
167 | if (fUserConfig) { |
| 168 | fUserConfig->Delete(); |
| 169 | delete fUserConfig; |
| 1df5fa54 |
170 | } |
| 171 | |
| 172 | |
| 829fb838 |
173 | } |
| 174 | |
| 175 | // |
| 176 | //______________________________________________________________________________ |
| 177 | // TFluka control methods |
| 178 | //______________________________________________________________________________ |
| 179 | void TFluka::Init() { |
| 180 | // |
| 181 | // Geometry initialisation |
| 182 | // |
| 183 | if (fVerbosityLevel >=3) cout << "==> TFluka::Init() called." << endl; |
| 184 | |
| 185 | if (!gGeoManager) new TGeoManager("geom", "FLUKA geometry"); |
| 186 | fApplication->ConstructGeometry(); |
| 187 | TGeoVolume *top = (TGeoVolume*)gGeoManager->GetListOfVolumes()->First(); |
| 188 | gGeoManager->SetTopVolume(top); |
| 189 | gGeoManager->CloseGeometry("di"); |
| 190 | gGeoManager->DefaultColors(); // to be removed |
| 191 | fNVolumes = fGeom->NofVolumes(); |
| 192 | fGeom->CreateFlukaMatFile("flukaMat.inp"); |
| 193 | if (fVerbosityLevel >=3) { |
| 194 | printf("== Number of volumes: %i\n ==", fNVolumes); |
| 195 | cout << "\t* InitPhysics() - Prepare input file to be called" << endl; |
| 196 | } |
| 3b8c325d |
197 | // now we have TGeo geometry created and we have to patch FlukaVmc.inp |
| 829fb838 |
198 | // with the material mapping file FlukaMat.inp |
| 199 | } |
| 200 | |
| 201 | |
| 202 | //______________________________________________________________________________ |
| 203 | void TFluka::FinishGeometry() { |
| 204 | // |
| 205 | // Build-up table with region to medium correspondance |
| 206 | // |
| 207 | if (fVerbosityLevel >=3) { |
| 208 | cout << "==> TFluka::FinishGeometry() called." << endl; |
| 209 | printf("----FinishGeometry - nothing to do with TGeo\n"); |
| 210 | cout << "<== TFluka::FinishGeometry() called." << endl; |
| 211 | } |
| 212 | } |
| 213 | |
| 214 | //______________________________________________________________________________ |
| 215 | void TFluka::BuildPhysics() { |
| 216 | // |
| 217 | // Prepare FLUKA input files and call FLUKA physics initialisation |
| 218 | // |
| 219 | |
| 220 | if (fVerbosityLevel >=3) |
| 221 | cout << "==> TFluka::BuildPhysics() called." << endl; |
| 222 | // Prepare input file with the current physics settings |
| 223 | InitPhysics(); |
| 224 | cout << "\t* InitPhysics() - Prepare input file was called" << endl; |
| 225 | |
| 226 | if (fVerbosityLevel >=2) |
| 227 | cout << "\t* Changing lfdrtr = (" << (GLOBAL.lfdrtr?'T':'F') |
| 228 | << ") in fluka..." << endl; |
| 229 | GLOBAL.lfdrtr = true; |
| 230 | |
| 231 | if (fVerbosityLevel >=2) |
| 232 | cout << "\t* Opening file " << fInputFileName << endl; |
| 233 | const char* fname = fInputFileName; |
| 234 | fluka_openinp(lunin, PASSCHARA(fname)); |
| 235 | |
| 236 | if (fVerbosityLevel >=2) |
| 237 | cout << "\t* Calling flukam..." << endl; |
| 238 | flukam(1); |
| 239 | |
| 240 | if (fVerbosityLevel >=2) |
| 241 | cout << "\t* Closing file " << fInputFileName << endl; |
| 242 | fluka_closeinp(lunin); |
| 243 | |
| 244 | FinishGeometry(); |
| 245 | |
| 246 | if (fVerbosityLevel >=3) |
| 247 | cout << "<== TFluka::Init() called." << endl; |
| 248 | |
| 249 | |
| 250 | if (fVerbosityLevel >=3) |
| 251 | cout << "<== TFluka::BuildPhysics() called." << endl; |
| 252 | } |
| 253 | |
| 254 | //______________________________________________________________________________ |
| 255 | void TFluka::ProcessEvent() { |
| 256 | // |
| 257 | // Process one event |
| 258 | // |
| b496f27c |
259 | if (fStopRun) { |
| 260 | printf("User Run Abortion: No more events handled !\n"); |
| 261 | fNEvent += 1; |
| 262 | return; |
| 263 | } |
| 264 | |
| 265 | if (fVerbosityLevel >=3) |
| 266 | cout << "==> TFluka::ProcessEvent() called." << endl; |
| 267 | fApplication->GeneratePrimaries(); |
| 268 | EPISOR.lsouit = true; |
| 269 | flukam(1); |
| 270 | if (fVerbosityLevel >=3) |
| 271 | cout << "<== TFluka::ProcessEvent() called." << endl; |
| 272 | // |
| 273 | // Increase event number |
| 274 | // |
| 275 | fNEvent += 1; |
| 829fb838 |
276 | } |
| 277 | |
| 278 | //______________________________________________________________________________ |
| 279 | Bool_t TFluka::ProcessRun(Int_t nevent) { |
| 280 | // |
| 281 | // Run steering |
| 282 | // |
| 283 | |
| 284 | if (fVerbosityLevel >=3) |
| 285 | cout << "==> TFluka::ProcessRun(" << nevent << ") called." |
| 286 | << endl; |
| 287 | |
| 288 | if (fVerbosityLevel >=2) { |
| 289 | cout << "\t* GLOBAL.fdrtr = " << (GLOBAL.lfdrtr?'T':'F') << endl; |
| 290 | cout << "\t* Calling flukam again..." << endl; |
| 291 | } |
| 292 | |
| 293 | fApplication->InitGeometry(); |
| 294 | Int_t todo = TMath::Abs(nevent); |
| 295 | for (Int_t ev = 0; ev < todo; ev++) { |
| 296 | fApplication->BeginEvent(); |
| 297 | ProcessEvent(); |
| 298 | fApplication->FinishEvent(); |
| 299 | } |
| 300 | |
| 301 | if (fVerbosityLevel >=3) |
| 302 | cout << "<== TFluka::ProcessRun(" << nevent << ") called." |
| 303 | << endl; |
| eea53470 |
304 | // Write fluka specific scoring output |
| 305 | newplo(); |
| 306 | |
| 829fb838 |
307 | return kTRUE; |
| 308 | } |
| 309 | |
| 310 | //_____________________________________________________________________________ |
| 311 | // methods for building/management of geometry |
| 312 | |
| 313 | // functions from GCONS |
| 314 | //____________________________________________________________________________ |
| 315 | void TFluka::Gfmate(Int_t imat, char *name, Float_t &a, Float_t &z, |
| 316 | Float_t &dens, Float_t &radl, Float_t &absl, |
| 317 | Float_t* /*ubuf*/, Int_t& /*nbuf*/) { |
| 318 | // |
| 319 | TGeoMaterial *mat; |
| 320 | TIter next (gGeoManager->GetListOfMaterials()); |
| 321 | while ((mat = (TGeoMaterial*)next())) { |
| 322 | if (mat->GetUniqueID() == (UInt_t)imat) break; |
| 323 | } |
| 324 | if (!mat) { |
| 325 | Error("Gfmate", "no material with index %i found", imat); |
| 326 | return; |
| 327 | } |
| 328 | sprintf(name, "%s", mat->GetName()); |
| 329 | a = mat->GetA(); |
| 330 | z = mat->GetZ(); |
| 331 | dens = mat->GetDensity(); |
| 332 | radl = mat->GetRadLen(); |
| 333 | absl = mat->GetIntLen(); |
| 334 | } |
| 335 | |
| 336 | //______________________________________________________________________________ |
| 337 | void TFluka::Gfmate(Int_t imat, char *name, Double_t &a, Double_t &z, |
| 338 | Double_t &dens, Double_t &radl, Double_t &absl, |
| 339 | Double_t* /*ubuf*/, Int_t& /*nbuf*/) { |
| 340 | // |
| 341 | TGeoMaterial *mat; |
| 342 | TIter next (gGeoManager->GetListOfMaterials()); |
| 343 | while ((mat = (TGeoMaterial*)next())) { |
| 344 | if (mat->GetUniqueID() == (UInt_t)imat) break; |
| 345 | } |
| 346 | if (!mat) { |
| 347 | Error("Gfmate", "no material with index %i found", imat); |
| 348 | return; |
| 349 | } |
| 350 | sprintf(name, "%s", mat->GetName()); |
| 351 | a = mat->GetA(); |
| 352 | z = mat->GetZ(); |
| 353 | dens = mat->GetDensity(); |
| 354 | radl = mat->GetRadLen(); |
| 355 | absl = mat->GetIntLen(); |
| 356 | } |
| 357 | |
| 358 | // detector composition |
| 359 | //______________________________________________________________________________ |
| 360 | void TFluka::Material(Int_t& kmat, const char* name, Double_t a, |
| 361 | Double_t z, Double_t dens, Double_t radl, Double_t absl, |
| 362 | Float_t* buf, Int_t nwbuf) { |
| 363 | // |
| 364 | Double_t* dbuf = fGeom->CreateDoubleArray(buf, nwbuf); |
| 365 | Material(kmat, name, a, z, dens, radl, absl, dbuf, nwbuf); |
| 366 | delete [] dbuf; |
| 367 | } |
| 368 | |
| 369 | //______________________________________________________________________________ |
| 370 | void TFluka::Material(Int_t& kmat, const char* name, Double_t a, |
| 371 | Double_t z, Double_t dens, Double_t radl, Double_t absl, |
| 372 | Double_t* /*buf*/, Int_t /*nwbuf*/) { |
| 373 | // |
| fb2cbbec |
374 | // Define a material |
| 829fb838 |
375 | TGeoMaterial *mat; |
| 376 | kmat = gGeoManager->GetListOfMaterials()->GetSize(); |
| 377 | if ((z-Int_t(z)) > 1E-3) { |
| 378 | mat = fGeom->GetMakeWrongMaterial(z); |
| 379 | if (mat) { |
| 380 | mat->SetRadLen(radl,absl); |
| 381 | mat->SetUniqueID(kmat); |
| 382 | return; |
| 383 | } |
| 384 | } |
| 385 | gGeoManager->Material(name, a, z, dens, kmat, radl, absl); |
| 386 | } |
| 387 | |
| 388 | //______________________________________________________________________________ |
| 389 | void TFluka::Mixture(Int_t& kmat, const char *name, Float_t *a, |
| 390 | Float_t *z, Double_t dens, Int_t nlmat, Float_t *wmat) { |
| fb2cbbec |
391 | // |
| 392 | // Define a material mixture |
| 829fb838 |
393 | // |
| 394 | Double_t* da = fGeom->CreateDoubleArray(a, TMath::Abs(nlmat)); |
| 395 | Double_t* dz = fGeom->CreateDoubleArray(z, TMath::Abs(nlmat)); |
| 396 | Double_t* dwmat = fGeom->CreateDoubleArray(wmat, TMath::Abs(nlmat)); |
| 397 | |
| 398 | Mixture(kmat, name, da, dz, dens, nlmat, dwmat); |
| 399 | for (Int_t i=0; i<nlmat; i++) { |
| 400 | a[i] = da[i]; z[i] = dz[i]; wmat[i] = dwmat[i]; |
| 401 | } |
| 402 | |
| 403 | delete [] da; |
| 404 | delete [] dz; |
| 405 | delete [] dwmat; |
| 406 | } |
| 407 | |
| 408 | //______________________________________________________________________________ |
| 409 | void TFluka::Mixture(Int_t& kmat, const char *name, Double_t *a, |
| 410 | Double_t *z, Double_t dens, Int_t nlmat, Double_t *wmat) { |
| 411 | // |
| 412 | // Defines mixture OR COMPOUND IMAT as composed by |
| 413 | // THE BASIC NLMAT materials defined by arrays A,Z and WMAT |
| 414 | // |
| 415 | // If NLMAT > 0 then wmat contains the proportion by |
| 416 | // weights of each basic material in the mixture. |
| 417 | // |
| 418 | // If nlmat < 0 then WMAT contains the number of atoms |
| 419 | // of a given kind into the molecule of the COMPOUND |
| 420 | // In this case, WMAT in output is changed to relative |
| 421 | // weigths. |
| 422 | // |
| 423 | Int_t i,j; |
| 424 | if (nlmat < 0) { |
| 425 | nlmat = - nlmat; |
| 426 | Double_t amol = 0; |
| 427 | for (i=0;i<nlmat;i++) { |
| 428 | amol += a[i]*wmat[i]; |
| 429 | } |
| 430 | for (i=0;i<nlmat;i++) { |
| 431 | wmat[i] *= a[i]/amol; |
| 432 | } |
| 433 | } |
| 434 | kmat = gGeoManager->GetListOfMaterials()->GetSize(); |
| 435 | // Check if we have elements with fractional Z |
| 436 | TGeoMaterial *mat = 0; |
| 437 | TGeoMixture *mix = 0; |
| 438 | Bool_t mixnew = kFALSE; |
| 439 | for (i=0; i<nlmat; i++) { |
| 440 | if (z[i]-Int_t(z[i]) < 1E-3) continue; |
| 441 | // We have found an element with fractional Z -> loop mixtures to look for it |
| 442 | for (j=0; j<kmat; j++) { |
| 443 | mat = (TGeoMaterial*)gGeoManager->GetListOfMaterials()->At(j); |
| 444 | if (!mat) break; |
| 445 | if (!mat->IsMixture()) continue; |
| 446 | mix = (TGeoMixture*)mat; |
| 447 | if (TMath::Abs(z[i]-mix->GetZ()) >1E-3) continue; |
| 448 | // printf(" FOUND component %i as mixture %s\n", i, mat->GetName()); |
| 449 | mixnew = kTRUE; |
| 450 | break; |
| 451 | } |
| 452 | if (!mixnew) Warning("Mixture","%s : cannot find component %i with fractional Z=%f\n", name, i, z[i]); |
| 453 | break; |
| 454 | } |
| 455 | if (mixnew) { |
| 456 | Int_t nlmatnew = nlmat+mix->GetNelements()-1; |
| 457 | Double_t *anew = new Double_t[nlmatnew]; |
| 458 | Double_t *znew = new Double_t[nlmatnew]; |
| 459 | Double_t *wmatnew = new Double_t[nlmatnew]; |
| 460 | Int_t ind=0; |
| 461 | for (j=0; j<nlmat; j++) { |
| 462 | if (j==i) continue; |
| 463 | anew[ind] = a[j]; |
| 464 | znew[ind] = z[j]; |
| 465 | wmatnew[ind] = wmat[j]; |
| 466 | ind++; |
| 467 | } |
| 468 | for (j=0; j<mix->GetNelements(); j++) { |
| 469 | anew[ind] = mix->GetAmixt()[j]; |
| 470 | znew[ind] = mix->GetZmixt()[j]; |
| 471 | wmatnew[ind] = wmat[i]*mix->GetWmixt()[j]; |
| 472 | ind++; |
| 473 | } |
| 474 | Mixture(kmat, name, anew, znew, dens, nlmatnew, wmatnew); |
| 475 | delete [] anew; |
| 476 | delete [] znew; |
| 477 | delete [] wmatnew; |
| 478 | return; |
| 479 | } |
| 480 | // Now we need to compact identical elements within the mixture |
| 481 | // First check if this happens |
| 482 | mixnew = kFALSE; |
| 483 | for (i=0; i<nlmat-1; i++) { |
| 484 | for (j=i+1; j<nlmat; j++) { |
| 485 | if (z[i] == z[j]) { |
| 486 | mixnew = kTRUE; |
| 487 | break; |
| 488 | } |
| 489 | } |
| 490 | if (mixnew) break; |
| 491 | } |
| 492 | if (mixnew) { |
| 493 | Int_t nlmatnew = 0; |
| 494 | Double_t *anew = new Double_t[nlmat]; |
| 495 | Double_t *znew = new Double_t[nlmat]; |
| 496 | memset(znew, 0, nlmat*sizeof(Double_t)); |
| 497 | Double_t *wmatnew = new Double_t[nlmat]; |
| 498 | Bool_t skipi; |
| 499 | for (i=0; i<nlmat; i++) { |
| 500 | skipi = kFALSE; |
| 501 | for (j=0; j<nlmatnew; j++) { |
| 502 | if (z[i] == z[j]) { |
| 503 | wmatnew[j] += wmat[i]; |
| 504 | skipi = kTRUE; |
| 505 | break; |
| 506 | } |
| 507 | } |
| 508 | if (skipi) continue; |
| 509 | anew[nlmatnew] = a[i]; |
| 510 | znew[nlmatnew] = z[i]; |
| 511 | wmatnew[nlmatnew] = wmat[i]; |
| 512 | nlmatnew++; |
| 513 | } |
| 514 | Mixture(kmat, name, anew, znew, dens, nlmatnew, wmatnew); |
| 515 | delete [] anew; |
| 516 | delete [] znew; |
| 517 | delete [] wmatnew; |
| 518 | return; |
| 519 | } |
| 520 | gGeoManager->Mixture(name, a, z, dens, nlmat, wmat, kmat); |
| 521 | } |
| 522 | |
| 523 | //______________________________________________________________________________ |
| 524 | void TFluka::Medium(Int_t& kmed, const char *name, Int_t nmat, |
| 525 | Int_t isvol, Int_t ifield, Double_t fieldm, Double_t tmaxfd, |
| 526 | Double_t stemax, Double_t deemax, Double_t epsil, |
| 527 | Double_t stmin, Float_t* ubuf, Int_t nbuf) { |
| b2129742 |
528 | // Define a medium |
| 529 | // |
| 829fb838 |
530 | kmed = gGeoManager->GetListOfMedia()->GetSize()+1; |
| 531 | fMCGeo->Medium(kmed, name, nmat, isvol, ifield, fieldm, tmaxfd, stemax, deemax, |
| 532 | epsil, stmin, ubuf, nbuf); |
| 533 | } |
| 534 | |
| 535 | //______________________________________________________________________________ |
| 536 | void TFluka::Medium(Int_t& kmed, const char *name, Int_t nmat, |
| 537 | Int_t isvol, Int_t ifield, Double_t fieldm, Double_t tmaxfd, |
| 538 | Double_t stemax, Double_t deemax, Double_t epsil, |
| 539 | Double_t stmin, Double_t* ubuf, Int_t nbuf) { |
| b2129742 |
540 | // Define a medium |
| 541 | // |
| 829fb838 |
542 | kmed = gGeoManager->GetListOfMedia()->GetSize()+1; |
| 543 | fMCGeo->Medium(kmed, name, nmat, isvol, ifield, fieldm, tmaxfd, stemax, deemax, |
| 544 | epsil, stmin, ubuf, nbuf); |
| 545 | } |
| 546 | |
| 547 | //______________________________________________________________________________ |
| 548 | void TFluka::Matrix(Int_t& krot, Double_t thetaX, Double_t phiX, |
| 549 | Double_t thetaY, Double_t phiY, Double_t thetaZ, |
| 550 | Double_t phiZ) { |
| 551 | // |
| 552 | krot = gGeoManager->GetListOfMatrices()->GetEntriesFast(); |
| 553 | fMCGeo->Matrix(krot, thetaX, phiX, thetaY, phiY, thetaZ, phiZ); |
| 554 | } |
| 555 | |
| 556 | //______________________________________________________________________________ |
| 557 | void TFluka::Gstpar(Int_t itmed, const char* param, Double_t parval) { |
| 558 | // |
| 559 | // |
| 7b203b6e |
560 | // Check if material is used |
| 561 | if (fVerbosityLevel >=3) |
| 562 | printf("Gstpar called with %6d %5s %12.4e %6d\n", itmed, param, parval, fGeom->GetFlukaMaterial(itmed)); |
| 563 | Int_t* reglist; |
| 564 | Int_t nreg; |
| c1c801f9 |
565 | reglist = fGeom->GetMaterialList(fGeom->GetFlukaMaterial(itmed), nreg); |
| 566 | if (nreg == 0) { |
| 567 | return; |
| 568 | } |
| 569 | |
| 7b203b6e |
570 | // |
| 829fb838 |
571 | Bool_t process = kFALSE; |
| 572 | if (strncmp(param, "DCAY", 4) == 0 || |
| 573 | strncmp(param, "PAIR", 4) == 0 || |
| 574 | strncmp(param, "COMP", 4) == 0 || |
| 575 | strncmp(param, "PHOT", 4) == 0 || |
| 576 | strncmp(param, "PFIS", 4) == 0 || |
| 577 | strncmp(param, "DRAY", 4) == 0 || |
| 578 | strncmp(param, "ANNI", 4) == 0 || |
| 579 | strncmp(param, "BREM", 4) == 0 || |
| 580 | strncmp(param, "MUNU", 4) == 0 || |
| 581 | strncmp(param, "CKOV", 4) == 0 || |
| 582 | strncmp(param, "HADR", 4) == 0 || |
| 583 | strncmp(param, "LOSS", 4) == 0 || |
| 584 | strncmp(param, "MULS", 4) == 0 || |
| 585 | strncmp(param, "RAYL", 4) == 0) |
| 586 | { |
| 587 | process = kTRUE; |
| 588 | } |
| 589 | if (process) { |
| 590 | SetProcess(param, Int_t (parval), fGeom->GetFlukaMaterial(itmed)); |
| 591 | } else { |
| 592 | SetCut(param, parval, fGeom->GetFlukaMaterial(itmed)); |
| 593 | } |
| 594 | } |
| 595 | |
| 596 | // functions from GGEOM |
| 597 | //_____________________________________________________________________________ |
| 598 | void TFluka::Gsatt(const char *name, const char *att, Int_t val) |
| 599 | { |
| 6f5667d1 |
600 | // Set visualisation attributes for one volume |
| 829fb838 |
601 | char vname[5]; |
| 602 | fGeom->Vname(name,vname); |
| 603 | char vatt[5]; |
| 604 | fGeom->Vname(att,vatt); |
| 605 | gGeoManager->SetVolumeAttribute(vname, vatt, val); |
| 606 | } |
| 607 | |
| 608 | //______________________________________________________________________________ |
| 609 | Int_t TFluka::Gsvolu(const char *name, const char *shape, Int_t nmed, |
| 610 | Float_t *upar, Int_t np) { |
| 611 | // |
| 612 | return fMCGeo->Gsvolu(name, shape, nmed, upar, np); |
| 613 | } |
| 614 | |
| 615 | //______________________________________________________________________________ |
| 616 | Int_t TFluka::Gsvolu(const char *name, const char *shape, Int_t nmed, |
| 617 | Double_t *upar, Int_t np) { |
| 618 | // |
| 619 | return fMCGeo->Gsvolu(name, shape, nmed, upar, np); |
| 620 | } |
| 621 | |
| 622 | //______________________________________________________________________________ |
| 623 | void TFluka::Gsdvn(const char *name, const char *mother, Int_t ndiv, |
| 624 | Int_t iaxis) { |
| 625 | // |
| 626 | fMCGeo->Gsdvn(name, mother, ndiv, iaxis); |
| 627 | } |
| 628 | |
| 629 | //______________________________________________________________________________ |
| 630 | void TFluka::Gsdvn2(const char *name, const char *mother, Int_t ndiv, |
| 631 | Int_t iaxis, Double_t c0i, Int_t numed) { |
| 632 | // |
| 633 | fMCGeo->Gsdvn2(name, mother, ndiv, iaxis, c0i, numed); |
| 634 | } |
| 635 | |
| 636 | //______________________________________________________________________________ |
| 637 | void TFluka::Gsdvt(const char *name, const char *mother, Double_t step, |
| 638 | Int_t iaxis, Int_t numed, Int_t ndvmx) { |
| 639 | // |
| 640 | fMCGeo->Gsdvt(name, mother, step, iaxis, numed, ndvmx); |
| 641 | } |
| 642 | |
| 643 | //______________________________________________________________________________ |
| 644 | void TFluka::Gsdvt2(const char *name, const char *mother, Double_t step, |
| 645 | Int_t iaxis, Double_t c0, Int_t numed, Int_t ndvmx) { |
| 646 | // |
| 647 | fMCGeo->Gsdvt2(name, mother, step, iaxis, c0, numed, ndvmx); |
| 648 | } |
| 649 | |
| 650 | //______________________________________________________________________________ |
| 651 | void TFluka::Gsord(const char * /*name*/, Int_t /*iax*/) { |
| 652 | // |
| 653 | // Nothing to do with TGeo |
| 654 | } |
| 655 | |
| 656 | //______________________________________________________________________________ |
| 657 | void TFluka::Gspos(const char *name, Int_t nr, const char *mother, |
| 658 | Double_t x, Double_t y, Double_t z, Int_t irot, |
| 659 | const char *konly) { |
| 660 | // |
| 661 | fMCGeo->Gspos(name, nr, mother, x, y, z, irot, konly); |
| 662 | } |
| 663 | |
| 664 | //______________________________________________________________________________ |
| 665 | void TFluka::Gsposp(const char *name, Int_t nr, const char *mother, |
| 666 | Double_t x, Double_t y, Double_t z, Int_t irot, |
| 667 | const char *konly, Float_t *upar, Int_t np) { |
| 668 | // |
| 669 | fMCGeo->Gsposp(name, nr, mother, x, y, z, irot, konly, upar, np); |
| 670 | } |
| 671 | |
| 672 | //______________________________________________________________________________ |
| 673 | void TFluka::Gsposp(const char *name, Int_t nr, const char *mother, |
| 674 | Double_t x, Double_t y, Double_t z, Int_t irot, |
| 675 | const char *konly, Double_t *upar, Int_t np) { |
| 676 | // |
| 677 | fMCGeo->Gsposp(name, nr, mother, x, y, z, irot, konly, upar, np); |
| 678 | } |
| 679 | |
| 680 | //______________________________________________________________________________ |
| 681 | void TFluka::Gsbool(const char* /*onlyVolName*/, const char* /*manyVolName*/) { |
| 682 | // |
| 683 | // Nothing to do with TGeo |
| 684 | } |
| 685 | |
| 686 | //______________________________________________________________________________ |
| 687 | void TFluka::SetCerenkov(Int_t itmed, Int_t npckov, Float_t* ppckov, |
| 688 | Float_t* absco, Float_t* effic, Float_t* rindex) { |
| 689 | // |
| 690 | // Set Cerenkov properties for medium itmed |
| 691 | // |
| 692 | // npckov: number of sampling points |
| 693 | // ppckov: energy values |
| 694 | // absco: absorption length |
| 695 | // effic: quantum efficiency |
| 696 | // rindex: refraction index |
| 697 | // |
| 698 | // |
| 699 | // |
| 700 | // Create object holding Cerenkov properties |
| 701 | // |
| 702 | TFlukaCerenkov* cerenkovProperties = new TFlukaCerenkov(npckov, ppckov, absco, effic, rindex); |
| 703 | // |
| 704 | // Pass object to medium |
| 705 | TGeoMedium* medium = gGeoManager->GetMedium(itmed); |
| 706 | medium->SetCerenkovProperties(cerenkovProperties); |
| 707 | } |
| 708 | |
| 709 | //______________________________________________________________________________ |
| 710 | void TFluka::SetCerenkov(Int_t /*itmed*/, Int_t /*npckov*/, Double_t * /*ppckov*/, |
| 711 | Double_t * /*absco*/, Double_t * /*effic*/, Double_t * /*rindex*/) { |
| 712 | // |
| 713 | // Not implemented with TGeo - what G4 did ? Any FLUKA card generated? |
| 714 | Warning("SetCerenkov", "Not implemented with TGeo"); |
| 715 | } |
| 716 | |
| 717 | // Euclid |
| 718 | //______________________________________________________________________________ |
| 719 | void TFluka::WriteEuclid(const char* /*fileName*/, const char* /*topVol*/, |
| 720 | Int_t /*number*/, Int_t /*nlevel*/) { |
| 721 | // |
| 722 | // Not with TGeo |
| 723 | Warning("WriteEuclid", "Not implemented with TGeo"); |
| 724 | } |
| 725 | |
| 726 | |
| 727 | |
| 728 | //_____________________________________________________________________________ |
| 729 | // methods needed by the stepping |
| 730 | //____________________________________________________________________________ |
| 731 | |
| 732 | Int_t TFluka::GetMedium() const { |
| 733 | // |
| 734 | // Get the medium number for the current fluka region |
| 735 | // |
| 736 | return fGeom->GetMedium(); // this I need to check due to remapping !!! |
| 737 | } |
| 738 | |
| 739 | |
| 740 | |
| 741 | //____________________________________________________________________________ |
| 742 | // particle table usage |
| 743 | // ID <--> PDG transformations |
| 744 | //_____________________________________________________________________________ |
| 745 | Int_t TFluka::IdFromPDG(Int_t pdg) const |
| 746 | { |
| 747 | // |
| 748 | // Return Fluka code from PDG and pseudo ENDF code |
| 749 | |
| 750 | // Catch the feedback photons |
| 751 | if (pdg == 50000051) return (-1); |
| 752 | // MCIHAD() goes from pdg to fluka internal. |
| 753 | Int_t intfluka = mcihad(pdg); |
| 754 | // KPTOIP array goes from internal to official |
| 755 | return GetFlukaKPTOIP(intfluka); |
| 756 | } |
| 757 | |
| 758 | //______________________________________________________________________________ |
| 759 | Int_t TFluka::PDGFromId(Int_t id) const |
| 760 | { |
| 761 | // |
| 762 | // Return PDG code and pseudo ENDF code from Fluka code |
| f926898e |
763 | // Alpha He3 Triton Deuteron gen. ion opt. photon |
| 764 | Int_t idSpecial[6] = {10020040, 10020030, 10010030, 10010020, 10000000, 50000050}; |
| 829fb838 |
765 | // IPTOKP array goes from official to internal |
| 766 | |
| 767 | if (id == -1) { |
| 768 | // Cerenkov photon |
| bd3d5c8a |
769 | if (fVerbosityLevel >= 3) |
| 829fb838 |
770 | printf("\n PDGFromId: Cerenkov Photon \n"); |
| 771 | return 50000050; |
| 772 | } |
| 773 | // Error id |
| 774 | if (id == 0 || id < -6 || id > 250) { |
| f926898e |
775 | if (fVerbosityLevel >= 3) |
| 829fb838 |
776 | printf("PDGFromId: Error id = 0\n"); |
| 777 | return -1; |
| 778 | } |
| 779 | // Good id |
| f926898e |
780 | if (id > 0) { |
| 781 | Int_t intfluka = GetFlukaIPTOKP(id); |
| 782 | if (intfluka == 0) { |
| 783 | if (fVerbosityLevel >= 3) |
| 784 | printf("PDGFromId: Error intfluka = 0: %d\n", id); |
| 785 | return -1; |
| 786 | } else if (intfluka < 0) { |
| 787 | if (fVerbosityLevel >= 3) |
| 788 | printf("PDGFromId: Error intfluka < 0: %d\n", id); |
| 789 | return -1; |
| 790 | } |
| 791 | if (fVerbosityLevel >= 3) |
| 792 | printf("mpdgha called with %d %d \n", id, intfluka); |
| 793 | // MPDGHA() goes from fluka internal to pdg. |
| 794 | return mpdgha(intfluka); |
| 795 | } else { |
| 796 | // ions and optical photons |
| 797 | return idSpecial[id + 6]; |
| 829fb838 |
798 | } |
| 829fb838 |
799 | } |
| 800 | |
| bd3d5c8a |
801 | void TFluka::StopTrack() |
| 802 | { |
| 803 | // Set stopping conditions |
| 804 | // Works for photons and charged particles |
| 805 | fStopped = kTRUE; |
| 806 | } |
| 807 | |
| 829fb838 |
808 | //_____________________________________________________________________________ |
| 809 | // methods for physics management |
| 810 | //____________________________________________________________________________ |
| 811 | // |
| 812 | // set methods |
| 813 | // |
| 814 | |
| 1df5fa54 |
815 | void TFluka::SetProcess(const char* flagName, Int_t flagValue, Int_t imed) |
| 829fb838 |
816 | { |
| 817 | // Set process user flag for material imat |
| 1df5fa54 |
818 | // |
| 819 | // |
| 820 | // Update if already in the list |
| 829fb838 |
821 | // |
| fb2cbbec |
822 | TIter next(fUserConfig); |
| 1df5fa54 |
823 | TFlukaConfigOption* proc; |
| 824 | while((proc = (TFlukaConfigOption*)next())) |
| 825 | { |
| fb2cbbec |
826 | if (proc->Medium() == imed) { |
| 827 | proc->SetProcess(flagName, flagValue); |
| 828 | return; |
| 829 | } |
| 1df5fa54 |
830 | } |
| fb2cbbec |
831 | proc = new TFlukaConfigOption(imed); |
| 832 | proc->SetProcess(flagName, flagValue); |
| 833 | fUserConfig->Add(proc); |
| 834 | } |
| 835 | |
| 836 | //______________________________________________________________________________ |
| 837 | Bool_t TFluka::SetProcess(const char* flagName, Int_t flagValue) |
| 838 | { |
| 839 | // Set process user flag |
| 1df5fa54 |
840 | // |
| 1df5fa54 |
841 | // |
| fb2cbbec |
842 | SetProcess(flagName, flagValue, -1); |
| 1df5fa54 |
843 | return kTRUE; |
| 829fb838 |
844 | } |
| 845 | |
| 846 | //______________________________________________________________________________ |
| 847 | void TFluka::SetCut(const char* cutName, Double_t cutValue, Int_t imed) |
| 848 | { |
| 849 | // Set user cut value for material imed |
| 850 | // |
| fb2cbbec |
851 | TIter next(fUserConfig); |
| 852 | TFlukaConfigOption* proc; |
| 853 | while((proc = (TFlukaConfigOption*)next())) |
| 854 | { |
| 855 | if (proc->Medium() == imed) { |
| 856 | proc->SetCut(cutName, cutValue); |
| 857 | return; |
| 858 | } |
| 859 | } |
| 860 | |
| 861 | proc = new TFlukaConfigOption(imed); |
| 862 | proc->SetCut(cutName, cutValue); |
| 863 | fUserConfig->Add(proc); |
| 829fb838 |
864 | } |
| 865 | |
| 866 | //______________________________________________________________________________ |
| 867 | Bool_t TFluka::SetCut(const char* cutName, Double_t cutValue) |
| 868 | { |
| 869 | // Set user cut value |
| 870 | // |
| 1df5fa54 |
871 | // |
| fb2cbbec |
872 | SetCut(cutName, cutValue, -1); |
| 873 | return kTRUE; |
| 829fb838 |
874 | } |
| 875 | |
| b496f27c |
876 | void TFluka::SetUserScoring(const char* option, Int_t npar, Float_t what[12]) |
| 877 | { |
| 878 | // |
| 879 | // Ads a user scoring option to th list |
| 880 | // |
| 881 | TFlukaScoringOption* opt = new TFlukaScoringOption(option, "User Scoring", npar, what); |
| 882 | fUserScore->Add(opt); |
| 883 | } |
| 884 | |
| 885 | |
| 829fb838 |
886 | //______________________________________________________________________________ |
| 887 | Double_t TFluka::Xsec(char*, Double_t, Int_t, Int_t) |
| 888 | { |
| 889 | printf("WARNING: Xsec not yet implemented !\n"); return -1.; |
| 890 | } |
| 891 | |
| 892 | |
| 893 | //______________________________________________________________________________ |
| 894 | void TFluka::InitPhysics() |
| 895 | { |
| 896 | // |
| 897 | // Physics initialisation with preparation of FLUKA input cards |
| 898 | // |
| fb2cbbec |
899 | printf("=>InitPhysics\n"); |
| 829fb838 |
900 | |
| fb2cbbec |
901 | // Construct file names |
| 902 | FILE *pFlukaVmcCoreInp, *pFlukaVmcFlukaMat, *pFlukaVmcInp; |
| 903 | TString sFlukaVmcCoreInp = getenv("ALICE_ROOT"); |
| 904 | sFlukaVmcCoreInp +="/TFluka/input/"; |
| 905 | TString sFlukaVmcTmp = "flukaMat.inp"; |
| 906 | TString sFlukaVmcInp = GetInputFileName(); |
| 907 | sFlukaVmcCoreInp += GetCoreInputFileName(); |
| 908 | |
| 909 | // Open files |
| 910 | if ((pFlukaVmcCoreInp = fopen(sFlukaVmcCoreInp.Data(),"r")) == NULL) { |
| 911 | printf("\nCannot open file %s\n",sFlukaVmcCoreInp.Data()); |
| 912 | exit(1); |
| 913 | } |
| 914 | if ((pFlukaVmcFlukaMat = fopen(sFlukaVmcTmp.Data(),"r")) == NULL) { |
| 915 | printf("\nCannot open file %s\n",sFlukaVmcTmp.Data()); |
| 916 | exit(1); |
| 917 | } |
| 918 | if ((pFlukaVmcInp = fopen(sFlukaVmcInp.Data(),"w")) == NULL) { |
| 919 | printf("\nCannot open file %s\n",sFlukaVmcInp.Data()); |
| 920 | exit(1); |
| 921 | } |
| 829fb838 |
922 | |
| fb2cbbec |
923 | // Copy core input file |
| 924 | Char_t sLine[255]; |
| 925 | Float_t fEventsPerRun; |
| 829fb838 |
926 | |
| fb2cbbec |
927 | while ((fgets(sLine,255,pFlukaVmcCoreInp)) != NULL) { |
| 928 | if (strncmp(sLine,"GEOEND",6) != 0) |
| 929 | fprintf(pFlukaVmcInp,"%s",sLine); // copy until GEOEND card |
| 930 | else { |
| 931 | fprintf(pFlukaVmcInp,"GEOEND\n"); // add GEOEND card |
| 932 | goto flukamat; |
| 829fb838 |
933 | } |
| fb2cbbec |
934 | } // end of while until GEOEND card |
| 935 | |
| 829fb838 |
936 | |
| fb2cbbec |
937 | flukamat: |
| 938 | while ((fgets(sLine,255,pFlukaVmcFlukaMat)) != NULL) { // copy flukaMat.inp file |
| 939 | fprintf(pFlukaVmcInp,"%s\n",sLine); |
| 940 | } |
| 941 | |
| 942 | while ((fgets(sLine,255,pFlukaVmcCoreInp)) != NULL) { |
| 943 | if (strncmp(sLine,"START",5) != 0) |
| 944 | fprintf(pFlukaVmcInp,"%s\n",sLine); |
| 945 | else { |
| 946 | sscanf(sLine+10,"%10f",&fEventsPerRun); |
| 947 | goto fin; |
| 948 | } |
| 949 | } //end of while until START card |
| 950 | |
| 951 | fin: |
| 829fb838 |
952 | |
| fb2cbbec |
953 | // Pass information to configuration objects |
| 829fb838 |
954 | |
| fb2cbbec |
955 | Float_t fLastMaterial = fGeom->GetLastMaterialIndex(); |
| 956 | TFlukaConfigOption::SetStaticInfo(pFlukaVmcInp, 3, fLastMaterial, fGeom); |
| 957 | |
| 958 | TIter next(fUserConfig); |
| 959 | TFlukaConfigOption* proc; |
| 960 | while((proc = (TFlukaConfigOption*)next())) proc->WriteFlukaInputCards(); |
| 961 | |
| 829fb838 |
962 | // Add START and STOP card |
| 3b8c325d |
963 | fprintf(pFlukaVmcInp,"START %10.1f\n",fEventsPerRun); |
| 964 | fprintf(pFlukaVmcInp,"STOP \n"); |
| 829fb838 |
965 | |
| 966 | |
| 967 | // Close files |
| 3b8c325d |
968 | fclose(pFlukaVmcCoreInp); |
| 969 | fclose(pFlukaVmcFlukaMat); |
| 970 | fclose(pFlukaVmcInp); |
| fb2cbbec |
971 | |
| 972 | |
| 973 | // |
| 974 | // Initialisation needed for Cerenkov photon production and transport |
| 975 | TObjArray *matList = GetFlukaMaterials(); |
| 976 | Int_t nmaterial = matList->GetEntriesFast(); |
| 977 | fMaterials = new Int_t[nmaterial+3]; |
| 978 | |
| 979 | for (Int_t im = 0; im < nmaterial; im++) |
| 980 | { |
| 981 | TGeoMaterial* material = dynamic_cast<TGeoMaterial*> (matList->At(im)); |
| 982 | Int_t idmat = material->GetIndex(); |
| 983 | fMaterials[idmat] = im; |
| 984 | } |
| 829fb838 |
985 | } // end of InitPhysics |
| 986 | |
| 987 | |
| 988 | //______________________________________________________________________________ |
| 07f5b33e |
989 | void TFluka::SetMaxStep(Double_t step) |
| 829fb838 |
990 | { |
| 07f5b33e |
991 | // Set the maximum step size |
| 992 | if (step > 1.e4) return; |
| 993 | |
| 994 | Int_t mreg, latt; |
| 995 | fGeom->GetCurrentRegion(mreg, latt); |
| 996 | STEPSZ.stepmx[mreg - 1] = step; |
| 829fb838 |
997 | } |
| 998 | |
| 2f09b80e |
999 | |
| 1000 | Double_t TFluka::MaxStep() const |
| 1001 | { |
| 1002 | // Return the maximum for current medium |
| 1003 | Int_t mreg, latt; |
| 1004 | fGeom->GetCurrentRegion(mreg, latt); |
| 1005 | return (STEPSZ.stepmx[mreg - 1]); |
| 1006 | } |
| 1007 | |
| 829fb838 |
1008 | //______________________________________________________________________________ |
| 1009 | void TFluka::SetMaxNStep(Int_t) |
| 1010 | { |
| 1011 | // SetMaxNStep is dummy procedure in TFluka ! |
| 1012 | if (fVerbosityLevel >=3) |
| 1013 | cout << "SetMaxNStep is dummy procedure in TFluka !" << endl; |
| 1014 | } |
| 1015 | |
| 1016 | //______________________________________________________________________________ |
| 1017 | void TFluka::SetUserDecay(Int_t) |
| 1018 | { |
| 1019 | // SetUserDecay is dummy procedure in TFluka ! |
| 1020 | if (fVerbosityLevel >=3) |
| 1021 | cout << "SetUserDecay is dummy procedure in TFluka !" << endl; |
| 1022 | } |
| 1023 | |
| 1024 | // |
| 1025 | // dynamic properties |
| 1026 | // |
| 1027 | //______________________________________________________________________________ |
| 1028 | void TFluka::TrackPosition(TLorentzVector& position) const |
| 1029 | { |
| 1030 | // Return the current position in the master reference frame of the |
| 1031 | // track being transported |
| 1032 | // TRACKR.atrack = age of the particle |
| 1033 | // TRACKR.xtrack = x-position of the last point |
| 1034 | // TRACKR.ytrack = y-position of the last point |
| 1035 | // TRACKR.ztrack = z-position of the last point |
| 1036 | Int_t caller = GetCaller(); |
| 1037 | if (caller == 3 || caller == 6 || caller == 11 || caller == 12) { //bxdraw,endraw,usdraw |
| 1038 | position.SetX(GetXsco()); |
| 1039 | position.SetY(GetYsco()); |
| 1040 | position.SetZ(GetZsco()); |
| 1041 | position.SetT(TRACKR.atrack); |
| 1042 | } |
| 1043 | else if (caller == 4) { // mgdraw |
| 1044 | position.SetX(TRACKR.xtrack[TRACKR.ntrack]); |
| 1045 | position.SetY(TRACKR.ytrack[TRACKR.ntrack]); |
| 1046 | position.SetZ(TRACKR.ztrack[TRACKR.ntrack]); |
| 1047 | position.SetT(TRACKR.atrack); |
| 1048 | } |
| 1049 | else if (caller == 5) { // sodraw |
| 1050 | position.SetX(TRACKR.xtrack[TRACKR.ntrack]); |
| 1051 | position.SetY(TRACKR.ytrack[TRACKR.ntrack]); |
| 1052 | position.SetZ(TRACKR.ztrack[TRACKR.ntrack]); |
| 1053 | position.SetT(0); |
| 1054 | } |
| 1055 | else |
| 1056 | Warning("TrackPosition","position not available"); |
| 1057 | } |
| 1058 | |
| 1059 | //______________________________________________________________________________ |
| 1060 | void TFluka::TrackPosition(Double_t& x, Double_t& y, Double_t& z) const |
| 1061 | { |
| 1062 | // Return the current position in the master reference frame of the |
| 1063 | // track being transported |
| 1064 | // TRACKR.atrack = age of the particle |
| 1065 | // TRACKR.xtrack = x-position of the last point |
| 1066 | // TRACKR.ytrack = y-position of the last point |
| 1067 | // TRACKR.ztrack = z-position of the last point |
| 1068 | Int_t caller = GetCaller(); |
| 1069 | if (caller == 3 || caller == 6 || caller == 11 || caller == 12) { //bxdraw,endraw,usdraw |
| 1070 | x = GetXsco(); |
| 1071 | y = GetYsco(); |
| 1072 | z = GetZsco(); |
| 1073 | } |
| 1074 | else if (caller == 4 || caller == 5) { // mgdraw, sodraw |
| 1075 | x = TRACKR.xtrack[TRACKR.ntrack]; |
| 1076 | y = TRACKR.ytrack[TRACKR.ntrack]; |
| 1077 | z = TRACKR.ztrack[TRACKR.ntrack]; |
| 1078 | } |
| 1079 | else |
| 1080 | Warning("TrackPosition","position not available"); |
| 1081 | } |
| 1082 | |
| 1083 | //______________________________________________________________________________ |
| 1084 | void TFluka::TrackMomentum(TLorentzVector& momentum) const |
| 1085 | { |
| 1086 | // Return the direction and the momentum (GeV/c) of the track |
| 1087 | // currently being transported |
| 1088 | // TRACKR.ptrack = momentum of the particle (not always defined, if |
| 1089 | // < 0 must be obtained from etrack) |
| 1090 | // TRACKR.cx,y,ztrck = direction cosines of the current particle |
| 1091 | // TRACKR.etrack = total energy of the particle |
| 1092 | // TRACKR.jtrack = identity number of the particle |
| 1093 | // PAPROP.am[TRACKR.jtrack] = particle mass in gev |
| 1094 | Int_t caller = GetCaller(); |
| 1095 | if (caller != 2) { // not eedraw |
| 1096 | if (TRACKR.ptrack >= 0) { |
| 1097 | momentum.SetPx(TRACKR.ptrack*TRACKR.cxtrck); |
| 1098 | momentum.SetPy(TRACKR.ptrack*TRACKR.cytrck); |
| 1099 | momentum.SetPz(TRACKR.ptrack*TRACKR.cztrck); |
| 1100 | momentum.SetE(TRACKR.etrack); |
| 1101 | return; |
| 1102 | } |
| 1103 | else { |
| 1104 | Double_t p = sqrt(TRACKR.etrack*TRACKR.etrack - PAPROP.am[TRACKR.jtrack+6]*PAPROP.am[TRACKR.jtrack+6]); |
| 1105 | momentum.SetPx(p*TRACKR.cxtrck); |
| 1106 | momentum.SetPy(p*TRACKR.cytrck); |
| 1107 | momentum.SetPz(p*TRACKR.cztrck); |
| 1108 | momentum.SetE(TRACKR.etrack); |
| 1109 | return; |
| 1110 | } |
| 1111 | } |
| 1112 | else |
| 1113 | Warning("TrackMomentum","momentum not available"); |
| 1114 | } |
| 1115 | |
| 1116 | //______________________________________________________________________________ |
| 1117 | void TFluka::TrackMomentum(Double_t& px, Double_t& py, Double_t& pz, Double_t& e) const |
| 1118 | { |
| 1119 | // Return the direction and the momentum (GeV/c) of the track |
| 1120 | // currently being transported |
| 1121 | // TRACKR.ptrack = momentum of the particle (not always defined, if |
| 1122 | // < 0 must be obtained from etrack) |
| 1123 | // TRACKR.cx,y,ztrck = direction cosines of the current particle |
| 1124 | // TRACKR.etrack = total energy of the particle |
| 1125 | // TRACKR.jtrack = identity number of the particle |
| 1126 | // PAPROP.am[TRACKR.jtrack] = particle mass in gev |
| 1127 | Int_t caller = GetCaller(); |
| 1128 | if (caller != 2) { // not eedraw |
| 1129 | if (TRACKR.ptrack >= 0) { |
| 1130 | px = TRACKR.ptrack*TRACKR.cxtrck; |
| 1131 | py = TRACKR.ptrack*TRACKR.cytrck; |
| 1132 | pz = TRACKR.ptrack*TRACKR.cztrck; |
| 1133 | e = TRACKR.etrack; |
| 1134 | return; |
| 1135 | } |
| 1136 | else { |
| 1137 | Double_t p = sqrt(TRACKR.etrack*TRACKR.etrack - PAPROP.am[TRACKR.jtrack+6]*PAPROP.am[TRACKR.jtrack+6]); |
| 1138 | px = p*TRACKR.cxtrck; |
| 1139 | py = p*TRACKR.cytrck; |
| 1140 | pz = p*TRACKR.cztrck; |
| 1141 | e = TRACKR.etrack; |
| 1142 | return; |
| 1143 | } |
| 1144 | } |
| 1145 | else |
| 1146 | Warning("TrackMomentum","momentum not available"); |
| 1147 | } |
| 1148 | |
| 1149 | //______________________________________________________________________________ |
| 1150 | Double_t TFluka::TrackStep() const |
| 1151 | { |
| 1152 | // Return the length in centimeters of the current step |
| 1153 | // TRACKR.ctrack = total curved path |
| 1154 | Int_t caller = GetCaller(); |
| 1155 | if (caller == 11 || caller==12 || caller == 3 || caller == 6) //bxdraw,endraw,usdraw |
| 1156 | return 0.0; |
| 1157 | else if (caller == 4) //mgdraw |
| 1158 | return TRACKR.ctrack; |
| 1159 | else |
| 1160 | return -1.0; |
| 1161 | } |
| 1162 | |
| 1163 | //______________________________________________________________________________ |
| 1164 | Double_t TFluka::TrackLength() const |
| 1165 | { |
| 1166 | // TRACKR.cmtrck = cumulative curved path since particle birth |
| 1167 | Int_t caller = GetCaller(); |
| 1168 | if (caller == 11 || caller==12 || caller == 3 || caller == 4 || caller == 6) //bxdraw,endraw,mgdraw,usdraw |
| 1169 | return TRACKR.cmtrck; |
| 1170 | else |
| 1171 | return -1.0; |
| 1172 | } |
| 1173 | |
| 1174 | //______________________________________________________________________________ |
| 1175 | Double_t TFluka::TrackTime() const |
| 1176 | { |
| 1177 | // Return the current time of flight of the track being transported |
| 1178 | // TRACKR.atrack = age of the particle |
| 1179 | Int_t caller = GetCaller(); |
| 1180 | if (caller == 11 || caller==12 || caller == 3 || caller == 4 || caller == 6) //bxdraw,endraw,mgdraw,usdraw |
| 1181 | return TRACKR.atrack; |
| 1182 | else |
| 1183 | return -1; |
| 1184 | } |
| 1185 | |
| 1186 | //______________________________________________________________________________ |
| 1187 | Double_t TFluka::Edep() const |
| 1188 | { |
| 1189 | // Energy deposition |
| 1190 | // if TRACKR.ntrack = 0, TRACKR.mtrack = 0: |
| 1191 | // -->local energy deposition (the value and the point are not recorded in TRACKR) |
| 1192 | // but in the variable "rull" of the procedure "endraw.cxx" |
| 1193 | // if TRACKR.ntrack > 0, TRACKR.mtrack = 0: |
| 1194 | // -->no energy loss along the track |
| 1195 | // if TRACKR.ntrack > 0, TRACKR.mtrack > 0: |
| 1196 | // -->energy loss distributed along the track |
| 07f5b33e |
1197 | // TRACKR.dtrack = energy deposition of the jth deposition event |
| 829fb838 |
1198 | |
| 1199 | // If coming from bxdraw we have 2 steps of 0 length and 0 edep |
| 1200 | Int_t caller = GetCaller(); |
| 1201 | if (caller == 11 || caller==12) return 0.0; |
| 1202 | Double_t sum = 0; |
| 1203 | for ( Int_t j=0;j<TRACKR.mtrack;j++) { |
| 1204 | sum +=TRACKR.dtrack[j]; |
| 1205 | } |
| 1206 | if (TRACKR.ntrack == 0 && TRACKR.mtrack == 0) |
| 1207 | return fRull + sum; |
| 1208 | else { |
| 1209 | return sum; |
| 1210 | } |
| 1211 | } |
| 1212 | |
| 1213 | //______________________________________________________________________________ |
| 1214 | Int_t TFluka::TrackPid() const |
| 1215 | { |
| 1216 | // Return the id of the particle transported |
| 1217 | // TRACKR.jtrack = identity number of the particle |
| 1218 | Int_t caller = GetCaller(); |
| f926898e |
1219 | if (caller != 2) { // not eedraw |
| 1220 | return PDGFromId(TRACKR.jtrack); |
| 1221 | } |
| 829fb838 |
1222 | else |
| 1223 | return -1000; |
| 1224 | } |
| 1225 | |
| 1226 | //______________________________________________________________________________ |
| 1227 | Double_t TFluka::TrackCharge() const |
| 1228 | { |
| 1229 | // Return charge of the track currently transported |
| 1230 | // PAPROP.ichrge = electric charge of the particle |
| 1231 | // TRACKR.jtrack = identity number of the particle |
| 1232 | Int_t caller = GetCaller(); |
| 1233 | if (caller != 2) // not eedraw |
| 1234 | return PAPROP.ichrge[TRACKR.jtrack+6]; |
| 1235 | else |
| 1236 | return -1000.0; |
| 1237 | } |
| 1238 | |
| 1239 | //______________________________________________________________________________ |
| 1240 | Double_t TFluka::TrackMass() const |
| 1241 | { |
| 1242 | // PAPROP.am = particle mass in GeV |
| 1243 | // TRACKR.jtrack = identity number of the particle |
| 1244 | Int_t caller = GetCaller(); |
| 1245 | if (caller != 2) // not eedraw |
| 1246 | return PAPROP.am[TRACKR.jtrack+6]; |
| 1247 | else |
| 1248 | return -1000.0; |
| 1249 | } |
| 1250 | |
| 1251 | //______________________________________________________________________________ |
| 1252 | Double_t TFluka::Etot() const |
| 1253 | { |
| 1254 | // TRACKR.etrack = total energy of the particle |
| 1255 | Int_t caller = GetCaller(); |
| 1256 | if (caller != 2) // not eedraw |
| 1257 | return TRACKR.etrack; |
| 1258 | else |
| 1259 | return -1000.0; |
| 1260 | } |
| 1261 | |
| 1262 | // |
| 1263 | // track status |
| 1264 | // |
| 1265 | //______________________________________________________________________________ |
| 1266 | Bool_t TFluka::IsNewTrack() const |
| 1267 | { |
| 1268 | // Return true for the first call of Stepping() |
| 1269 | return fTrackIsNew; |
| 1270 | } |
| 1271 | |
| 0dabe425 |
1272 | void TFluka::SetTrackIsNew(Bool_t flag) |
| 1273 | { |
| 1274 | // Return true for the first call of Stepping() |
| 1275 | fTrackIsNew = flag; |
| 1276 | |
| 1277 | } |
| 1278 | |
| 1279 | |
| 829fb838 |
1280 | //______________________________________________________________________________ |
| 1281 | Bool_t TFluka::IsTrackInside() const |
| 1282 | { |
| 1283 | // True if the track is not at the boundary of the current volume |
| 1284 | // In Fluka a step is always inside one kind of material |
| 1285 | // If the step would go behind the region of one material, |
| 1286 | // it will be shortened to reach only the boundary. |
| 1287 | // Therefore IsTrackInside() is always true. |
| 1288 | Int_t caller = GetCaller(); |
| 1289 | if (caller == 11 || caller==12) // bxdraw |
| 1290 | return 0; |
| 1291 | else |
| 1292 | return 1; |
| 1293 | } |
| 1294 | |
| 1295 | //______________________________________________________________________________ |
| 1296 | Bool_t TFluka::IsTrackEntering() const |
| 1297 | { |
| 1298 | // True if this is the first step of the track in the current volume |
| 1299 | |
| 1300 | Int_t caller = GetCaller(); |
| 1301 | if (caller == 11) // bxdraw entering |
| 1302 | return 1; |
| 1303 | else return 0; |
| 1304 | } |
| 1305 | |
| 1306 | //______________________________________________________________________________ |
| 1307 | Bool_t TFluka::IsTrackExiting() const |
| 1308 | { |
| 1309 | // True if track is exiting volume |
| 1310 | // |
| 1311 | Int_t caller = GetCaller(); |
| 1312 | if (caller == 12) // bxdraw exiting |
| 1313 | return 1; |
| 1314 | else return 0; |
| 1315 | } |
| 1316 | |
| 1317 | //______________________________________________________________________________ |
| 1318 | Bool_t TFluka::IsTrackOut() const |
| 1319 | { |
| 1320 | // True if the track is out of the setup |
| 1321 | // means escape |
| 1322 | // Icode = 14: escape - call from Kaskad |
| 1323 | // Icode = 23: escape - call from Emfsco |
| 1324 | // Icode = 32: escape - call from Kasneu |
| 1325 | // Icode = 40: escape - call from Kashea |
| 1326 | // Icode = 51: escape - call from Kasoph |
| 1327 | if (fIcode == 14 || |
| 1328 | fIcode == 23 || |
| 1329 | fIcode == 32 || |
| 1330 | fIcode == 40 || |
| 1331 | fIcode == 51) return 1; |
| 1332 | else return 0; |
| 1333 | } |
| 1334 | |
| 1335 | //______________________________________________________________________________ |
| 1336 | Bool_t TFluka::IsTrackDisappeared() const |
| 1337 | { |
| 1338 | // means all inelastic interactions and decays |
| 1339 | // fIcode from usdraw |
| 1340 | if (fIcode == 101 || // inelastic interaction |
| 1341 | fIcode == 102 || // particle decay |
| 0dabe425 |
1342 | fIcode == 103 || // delta ray generation by hadron |
| 1343 | fIcode == 104 || // direct pair production |
| 1344 | fIcode == 105 || // bremsstrahlung (muon) |
| 1345 | fIcode == 208 || // bremsstrahlung (electron) |
| 829fb838 |
1346 | fIcode == 214 || // in-flight annihilation |
| 1347 | fIcode == 215 || // annihilation at rest |
| 1348 | fIcode == 217 || // pair production |
| 0dabe425 |
1349 | fIcode == 219 || // Compton scattering |
| 1350 | fIcode == 221 || // Photoelectric effect |
| 1351 | fIcode == 300 || // hadronic interaction |
| 1352 | fIcode == 400 // delta-ray |
| 1353 | ) return 1; |
| 829fb838 |
1354 | else return 0; |
| 1355 | } |
| 1356 | |
| 1357 | //______________________________________________________________________________ |
| 1358 | Bool_t TFluka::IsTrackStop() const |
| 1359 | { |
| 1360 | // True if the track energy has fallen below the threshold |
| 1361 | // means stopped by signal or below energy threshold |
| 1362 | // Icode = 12: stopping particle - call from Kaskad |
| 1363 | // Icode = 15: time kill - call from Kaskad |
| 1364 | // Icode = 21: below threshold, iarg=1 - call from Emfsco |
| 1365 | // Icode = 22: below threshold, iarg=2 - call from Emfsco |
| 1366 | // Icode = 24: time kill - call from Emfsco |
| 1367 | // Icode = 31: below threshold - call from Kasneu |
| 1368 | // Icode = 33: time kill - call from Kasneu |
| 1369 | // Icode = 41: time kill - call from Kashea |
| 1370 | // Icode = 52: time kill - call from Kasoph |
| 1371 | if (fIcode == 12 || |
| 1372 | fIcode == 15 || |
| 1373 | fIcode == 21 || |
| 1374 | fIcode == 22 || |
| 1375 | fIcode == 24 || |
| 1376 | fIcode == 31 || |
| 1377 | fIcode == 33 || |
| 1378 | fIcode == 41 || |
| 1379 | fIcode == 52) return 1; |
| 1380 | else return 0; |
| 1381 | } |
| 1382 | |
| 1383 | //______________________________________________________________________________ |
| 1384 | Bool_t TFluka::IsTrackAlive() const |
| 1385 | { |
| 1386 | // means not disappeared or not out |
| 1387 | if (IsTrackDisappeared() || IsTrackOut() ) return 0; |
| 1388 | else return 1; |
| 1389 | } |
| 1390 | |
| 1391 | // |
| 1392 | // secondaries |
| 1393 | // |
| 1394 | |
| 1395 | //______________________________________________________________________________ |
| 1396 | Int_t TFluka::NSecondaries() const |
| 1397 | |
| 1398 | { |
| 1399 | // Number of secondary particles generated in the current step |
| 1400 | // FINUC.np = number of secondaries except light and heavy ions |
| 1401 | // FHEAVY.npheav = number of secondaries for light and heavy secondary ions |
| 7b203b6e |
1402 | Int_t caller = GetCaller(); |
| 1403 | if (caller == 6) // valid only after usdraw |
| 1404 | return FINUC.np + FHEAVY.npheav; |
| 1405 | else if (caller == 50) { |
| 1406 | // Cerenkov Photon production |
| 1407 | return fNCerenkov; |
| 1408 | } |
| 829fb838 |
1409 | return 0; |
| 1410 | } // end of NSecondaries |
| 1411 | |
| 1412 | //______________________________________________________________________________ |
| 1413 | void TFluka::GetSecondary(Int_t isec, Int_t& particleId, |
| 1414 | TLorentzVector& position, TLorentzVector& momentum) |
| 1415 | { |
| 1416 | // Copy particles from secondary stack to vmc stack |
| 1417 | // |
| 1418 | |
| 7b203b6e |
1419 | Int_t caller = GetCaller(); |
| 1420 | if (caller == 6) { // valid only after usdraw |
| 1421 | if (FINUC.np > 0) { |
| 1422 | // Hadronic interaction |
| 1423 | if (isec >= 0 && isec < FINUC.np) { |
| 1424 | particleId = PDGFromId(FINUC.kpart[isec]); |
| 1425 | position.SetX(fXsco); |
| 1426 | position.SetY(fYsco); |
| 1427 | position.SetZ(fZsco); |
| 1428 | position.SetT(TRACKR.atrack); |
| 1429 | momentum.SetPx(FINUC.plr[isec]*FINUC.cxr[isec]); |
| 1430 | momentum.SetPy(FINUC.plr[isec]*FINUC.cyr[isec]); |
| 1431 | momentum.SetPz(FINUC.plr[isec]*FINUC.czr[isec]); |
| 1432 | momentum.SetE(FINUC.tki[isec] + PAPROP.am[FINUC.kpart[isec]+6]); |
| 1433 | } |
| 1434 | else if (isec >= FINUC.np && isec < FINUC.np + FHEAVY.npheav) { |
| 1435 | Int_t jsec = isec - FINUC.np; |
| 1436 | particleId = FHEAVY.kheavy[jsec]; // this is Fluka id !!! |
| 1437 | position.SetX(fXsco); |
| 1438 | position.SetY(fYsco); |
| 1439 | position.SetZ(fZsco); |
| 1440 | position.SetT(TRACKR.atrack); |
| 1441 | momentum.SetPx(FHEAVY.pheavy[jsec]*FHEAVY.cxheav[jsec]); |
| 1442 | momentum.SetPy(FHEAVY.pheavy[jsec]*FHEAVY.cyheav[jsec]); |
| 1443 | momentum.SetPz(FHEAVY.pheavy[jsec]*FHEAVY.czheav[jsec]); |
| 1444 | if (FHEAVY.tkheav[jsec] >= 3 && FHEAVY.tkheav[jsec] <= 6) |
| 1445 | momentum.SetE(FHEAVY.tkheav[jsec] + PAPROP.am[jsec+6]); |
| 1446 | else if (FHEAVY.tkheav[jsec] > 6) |
| 1447 | momentum.SetE(FHEAVY.tkheav[jsec] + FHEAVY.amnhea[jsec]); // to be checked !!! |
| 1448 | } |
| 1449 | else |
| 1450 | Warning("GetSecondary","isec out of range"); |
| 1451 | } |
| 1452 | } else if (caller == 50) { |
| 1453 | Int_t index = OPPHST.lstopp - isec; |
| 1454 | position.SetX(OPPHST.xoptph[index]); |
| 1455 | position.SetY(OPPHST.yoptph[index]); |
| 1456 | position.SetZ(OPPHST.zoptph[index]); |
| 1457 | position.SetT(OPPHST.agopph[index]); |
| 1458 | Double_t p = OPPHST.poptph[index]; |
| 1459 | |
| 1460 | momentum.SetPx(p * OPPHST.txopph[index]); |
| 1461 | momentum.SetPy(p * OPPHST.tyopph[index]); |
| 1462 | momentum.SetPz(p * OPPHST.tzopph[index]); |
| 1463 | momentum.SetE(p); |
| 829fb838 |
1464 | } |
| 1465 | else |
| 7b203b6e |
1466 | Warning("GetSecondary","no secondaries available"); |
| 1467 | |
| 829fb838 |
1468 | } // end of GetSecondary |
| 1469 | |
| 7b203b6e |
1470 | |
| 829fb838 |
1471 | //______________________________________________________________________________ |
| 1472 | TMCProcess TFluka::ProdProcess(Int_t) const |
| 1473 | |
| 1474 | { |
| 1475 | // Name of the process that has produced the secondary particles |
| 1476 | // in the current step |
| 0dabe425 |
1477 | |
| 1478 | Int_t mugamma = (TRACKR.jtrack == 7 || TRACKR.jtrack == 10 || TRACKR.jtrack == 11); |
| 1479 | |
| b496f27c |
1480 | if (fIcode == 102) return kPDecay; |
| 0dabe425 |
1481 | else if (fIcode == 104 || fIcode == 217) return kPPair; |
| b496f27c |
1482 | else if (fIcode == 219) return kPCompton; |
| 1483 | else if (fIcode == 221) return kPPhotoelectric; |
| 0dabe425 |
1484 | else if (fIcode == 105 || fIcode == 208) return kPBrem; |
| 1485 | else if (fIcode == 103 || fIcode == 400) return kPDeltaRay; |
| 1486 | else if (fIcode == 210 || fIcode == 212) return kPDeltaRay; |
| 1487 | else if (fIcode == 214 || fIcode == 215) return kPAnnihilation; |
| b496f27c |
1488 | else if (fIcode == 101) return kPHadronic; |
| 829fb838 |
1489 | else if (fIcode == 101) { |
| b496f27c |
1490 | if (!mugamma) return kPHadronic; |
| 1491 | else if (TRACKR.jtrack == 7) return kPPhotoFission; |
| 1492 | else return kPMuonNuclear; |
| 829fb838 |
1493 | } |
| b496f27c |
1494 | else if (fIcode == 225) return kPRayleigh; |
| 829fb838 |
1495 | // Fluka codes 100, 300 and 400 still to be investigasted |
| b496f27c |
1496 | else return kPNoProcess; |
| 829fb838 |
1497 | } |
| 1498 | |
| 829fb838 |
1499 | |
| b496f27c |
1500 | Int_t TFluka::StepProcesses(TArrayI &proc) const |
| 1501 | { |
| 1502 | // |
| 1503 | // Return processes active in the current step |
| 1504 | // |
| 1505 | proc.Set(1); |
| 1506 | TMCProcess iproc; |
| 1507 | switch (fIcode) { |
| 1508 | case 15: |
| 1509 | case 24: |
| 1510 | case 33: |
| 1511 | case 41: |
| 1512 | case 52: |
| 1513 | iproc = kPTOFlimit; |
| 1514 | break; |
| 1515 | case 12: |
| 1516 | case 14: |
| 1517 | case 21: |
| 1518 | case 22: |
| 1519 | case 23: |
| 1520 | case 31: |
| 1521 | case 32: |
| 1522 | case 40: |
| 1523 | case 51: |
| 6fd5baa4 |
1524 | iproc = kPStop; |
| b496f27c |
1525 | break; |
| 1526 | case 50: |
| 1527 | iproc = kPLightAbsorption; |
| 1528 | break; |
| 6fd5baa4 |
1529 | case 59: |
| 1530 | iproc = kPLightRefraction; |
| b496f27c |
1531 | case 20: |
| 1532 | iproc = kPPhotoelectric; |
| 1533 | break; |
| 1534 | default: |
| 1535 | iproc = ProdProcess(0); |
| 1536 | } |
| 07f5b33e |
1537 | proc[0] = iproc; |
| b496f27c |
1538 | return 1; |
| 1539 | } |
| 829fb838 |
1540 | //______________________________________________________________________________ |
| 1541 | Int_t TFluka::VolId2Mate(Int_t id) const |
| 1542 | { |
| 1543 | // |
| 1544 | // Returns the material number for a given volume ID |
| 1545 | // |
| 1546 | return fMCGeo->VolId2Mate(id); |
| 1547 | } |
| 1548 | |
| 1549 | //______________________________________________________________________________ |
| 1550 | const char* TFluka::VolName(Int_t id) const |
| 1551 | { |
| 1552 | // |
| 1553 | // Returns the volume name for a given volume ID |
| 1554 | // |
| 1555 | return fMCGeo->VolName(id); |
| 1556 | } |
| 1557 | |
| 1558 | //______________________________________________________________________________ |
| 1559 | Int_t TFluka::VolId(const Text_t* volName) const |
| 1560 | { |
| 1561 | // |
| 1562 | // Converts from volume name to volume ID. |
| 1563 | // Time consuming. (Only used during set-up) |
| 1564 | // Could be replaced by hash-table |
| 1565 | // |
| 1566 | return fMCGeo->VolId(volName); |
| 1567 | } |
| 1568 | |
| 1569 | //______________________________________________________________________________ |
| 1570 | Int_t TFluka::CurrentVolID(Int_t& copyNo) const |
| 1571 | { |
| 1572 | // |
| 1573 | // Return the logical id and copy number corresponding to the current fluka region |
| 1574 | // |
| 1575 | if (gGeoManager->IsOutside()) return 0; |
| 1576 | TGeoNode *node = gGeoManager->GetCurrentNode(); |
| 1577 | copyNo = node->GetNumber(); |
| 1578 | Int_t id = node->GetVolume()->GetNumber(); |
| 1579 | return id; |
| 1580 | } |
| 1581 | |
| 1582 | //______________________________________________________________________________ |
| 1583 | Int_t TFluka::CurrentVolOffID(Int_t off, Int_t& copyNo) const |
| 1584 | { |
| 1585 | // |
| 1586 | // Return the logical id and copy number of off'th mother |
| 1587 | // corresponding to the current fluka region |
| 1588 | // |
| 1589 | if (off<0 || off>gGeoManager->GetLevel()) return 0; |
| 1590 | if (off==0) return CurrentVolID(copyNo); |
| 1591 | TGeoNode *node = gGeoManager->GetMother(off); |
| 1592 | if (!node) return 0; |
| 1593 | copyNo = node->GetNumber(); |
| 1594 | return node->GetVolume()->GetNumber(); |
| 1595 | } |
| 1596 | |
| 1597 | //______________________________________________________________________________ |
| 1598 | const char* TFluka::CurrentVolName() const |
| 1599 | { |
| 1600 | // |
| 1601 | // Return the current volume name |
| 1602 | // |
| 1603 | if (gGeoManager->IsOutside()) return 0; |
| 1604 | return gGeoManager->GetCurrentVolume()->GetName(); |
| 1605 | } |
| 1606 | |
| 1607 | //______________________________________________________________________________ |
| 1608 | const char* TFluka::CurrentVolOffName(Int_t off) const |
| 1609 | { |
| 1610 | // |
| 1611 | // Return the volume name of the off'th mother of the current volume |
| 1612 | // |
| 1613 | if (off<0 || off>gGeoManager->GetLevel()) return 0; |
| 1614 | if (off==0) return CurrentVolName(); |
| 1615 | TGeoNode *node = gGeoManager->GetMother(off); |
| 1616 | if (!node) return 0; |
| 1617 | return node->GetVolume()->GetName(); |
| 1618 | } |
| 1619 | |
| 1620 | //______________________________________________________________________________ |
| a60813de |
1621 | Int_t TFluka::CurrentMaterial(Float_t & a, Float_t & z, |
| 1622 | Float_t & dens, Float_t & radl, Float_t & absl) const |
| 829fb838 |
1623 | { |
| 1624 | // |
| a60813de |
1625 | // Return the current medium number and material properties |
| 829fb838 |
1626 | // |
| 1627 | Int_t copy; |
| 1628 | Int_t id = TFluka::CurrentVolID(copy); |
| 1629 | Int_t med = TFluka::VolId2Mate(id); |
| a60813de |
1630 | TGeoVolume* vol = gGeoManager->GetCurrentVolume(); |
| 1631 | TGeoMaterial* mat = vol->GetMaterial(); |
| 1632 | a = mat->GetA(); |
| 1633 | z = mat->GetZ(); |
| 1634 | dens = mat->GetDensity(); |
| 1635 | radl = mat->GetRadLen(); |
| 1636 | absl = mat->GetIntLen(); |
| 1637 | |
| 829fb838 |
1638 | return med; |
| 1639 | } |
| 1640 | |
| 1641 | //______________________________________________________________________________ |
| 1642 | void TFluka::Gmtod(Float_t* xm, Float_t* xd, Int_t iflag) |
| 1643 | { |
| 1644 | // Transforms a position from the world reference frame |
| 1645 | // to the current volume reference frame. |
| 1646 | // |
| 1647 | // Geant3 desription: |
| 1648 | // ================== |
| 1649 | // Computes coordinates XD (in DRS) |
| 1650 | // from known coordinates XM in MRS |
| 1651 | // The local reference system can be initialized by |
| 1652 | // - the tracking routines and GMTOD used in GUSTEP |
| 1653 | // - a call to GMEDIA(XM,NUMED) |
| 1654 | // - a call to GLVOLU(NLEVEL,NAMES,NUMBER,IER) |
| 1655 | // (inverse routine is GDTOM) |
| 1656 | // |
| 1657 | // If IFLAG=1 convert coordinates |
| 1658 | // IFLAG=2 convert direction cosinus |
| 1659 | // |
| 1660 | // --- |
| 1661 | Double_t xmL[3], xdL[3]; |
| 1662 | Int_t i; |
| 1663 | for (i=0;i<3;i++) xmL[i]=xm[i]; |
| 1664 | if (iflag == 1) gGeoManager->MasterToLocal(xmL,xdL); |
| 1665 | else gGeoManager->MasterToLocalVect(xmL,xdL); |
| 1666 | for (i=0;i<3;i++) xd[i] = xdL[i]; |
| 1667 | } |
| 1668 | |
| 1669 | //______________________________________________________________________________ |
| 1670 | void TFluka::Gmtod(Double_t* xm, Double_t* xd, Int_t iflag) |
| 1671 | { |
| 1672 | if (iflag == 1) gGeoManager->MasterToLocal(xm,xd); |
| 1673 | else gGeoManager->MasterToLocalVect(xm,xd); |
| 1674 | } |
| 1675 | |
| 1676 | //______________________________________________________________________________ |
| 1677 | void TFluka::Gdtom(Float_t* xd, Float_t* xm, Int_t iflag) |
| 1678 | { |
| 1679 | // Transforms a position from the current volume reference frame |
| 1680 | // to the world reference frame. |
| 1681 | // |
| 1682 | // Geant3 desription: |
| 1683 | // ================== |
| 1684 | // Computes coordinates XM (Master Reference System |
| 1685 | // knowing the coordinates XD (Detector Ref System) |
| 1686 | // The local reference system can be initialized by |
| 1687 | // - the tracking routines and GDTOM used in GUSTEP |
| 1688 | // - a call to GSCMED(NLEVEL,NAMES,NUMBER) |
| 1689 | // (inverse routine is GMTOD) |
| 1690 | // |
| 1691 | // If IFLAG=1 convert coordinates |
| 1692 | // IFLAG=2 convert direction cosinus |
| 1693 | // |
| 1694 | // --- |
| 1695 | Double_t xmL[3], xdL[3]; |
| 1696 | Int_t i; |
| 1697 | for (i=0;i<3;i++) xdL[i] = xd[i]; |
| 1698 | if (iflag == 1) gGeoManager->LocalToMaster(xdL,xmL); |
| 1699 | else gGeoManager->LocalToMasterVect(xdL,xmL); |
| 1700 | for (i=0;i<3;i++) xm[i]=xmL[i]; |
| 1701 | } |
| 1702 | |
| 1703 | //______________________________________________________________________________ |
| 1704 | void TFluka::Gdtom(Double_t* xd, Double_t* xm, Int_t iflag) |
| 1705 | { |
| 1706 | if (iflag == 1) gGeoManager->LocalToMaster(xd,xm); |
| 1707 | else gGeoManager->LocalToMasterVect(xd,xm); |
| 1708 | } |
| 1709 | |
| 1710 | //______________________________________________________________________________ |
| 1711 | TObjArray *TFluka::GetFlukaMaterials() |
| 1712 | { |
| 1713 | return fGeom->GetMatList(); |
| 1714 | } |
| 1715 | |
| 1716 | //______________________________________________________________________________ |
| 1717 | void TFluka::SetMreg(Int_t l) |
| 1718 | { |
| 1719 | // Set current fluka region |
| 1720 | fCurrentFlukaRegion = l; |
| 1721 | fGeom->SetMreg(l); |
| 1722 | } |
| 1723 | |
| 1724 | |
| b496f27c |
1725 | |
| 1726 | |
| 1727 | TString TFluka::ParticleName(Int_t pdg) const |
| 1728 | { |
| 1729 | // Return particle name for particle with pdg code pdg. |
| 1730 | Int_t ifluka = IdFromPDG(pdg); |
| 1731 | return TString((CHPPRP.btype[ifluka+6]), 8); |
| 1732 | } |
| 1733 | |
| 1734 | |
| 1735 | Double_t TFluka::ParticleMass(Int_t pdg) const |
| 1736 | { |
| 1737 | // Return particle mass for particle with pdg code pdg. |
| 1738 | Int_t ifluka = IdFromPDG(pdg); |
| 1739 | return (PAPROP.am[ifluka+6]); |
| 1740 | } |
| 1741 | |
| 1742 | Double_t TFluka::ParticleCharge(Int_t pdg) const |
| 1743 | { |
| 1744 | // Return particle charge for particle with pdg code pdg. |
| 1745 | Int_t ifluka = IdFromPDG(pdg); |
| 1746 | return Double_t(PAPROP.ichrge[ifluka+6]); |
| 1747 | } |
| 1748 | |
| 1749 | Double_t TFluka::ParticleLifeTime(Int_t pdg) const |
| 1750 | { |
| 1751 | // Return particle lifetime for particle with pdg code pdg. |
| 1752 | Int_t ifluka = IdFromPDG(pdg); |
| 1753 | return (PAPROP.thalf[ifluka+6]); |
| 1754 | } |
| 1755 | |
| 1756 | void TFluka::Gfpart(Int_t pdg, char* name, Int_t& type, Float_t& mass, Float_t& charge, Float_t& tlife) |
| 1757 | { |
| 1758 | // Retrieve particle properties for particle with pdg code pdg. |
| 1759 | |
| 1760 | strcpy(name, ParticleName(pdg).Data()); |
| 1761 | type = ParticleMCType(pdg); |
| 1762 | mass = ParticleMass(pdg); |
| 1763 | charge = ParticleCharge(pdg); |
| 1764 | tlife = ParticleLifeTime(pdg); |
| 1765 | } |
| 1766 | |
| 1767 | |
| 1768 | |
| 3a625972 |
1769 | #define pushcerenkovphoton pushcerenkovphoton_ |
| 7b203b6e |
1770 | #define usersteppingckv usersteppingckv_ |
| 3a625972 |
1771 | |
| 1772 | |
| 1773 | extern "C" { |
| 1774 | void pushcerenkovphoton(Double_t & px, Double_t & py, Double_t & pz, Double_t & e, |
| 1775 | Double_t & vx, Double_t & vy, Double_t & vz, Double_t & tof, |
| 1776 | Double_t & polx, Double_t & poly, Double_t & polz, Double_t & wgt, Int_t& ntr) |
| 1777 | { |
| 1778 | // |
| 1779 | // Pushes one cerenkov photon to the stack |
| 1780 | // |
| 1781 | |
| 1782 | TFluka* fluka = (TFluka*) gMC; |
| 1783 | TVirtualMCStack* cppstack = fluka->GetStack(); |
| bd3d5c8a |
1784 | Int_t parent = TRACKR.ispusr[mkbmx2-1]; |
| 921e0994 |
1785 | cppstack->PushTrack(0, parent, 50000050, |
| 3a625972 |
1786 | px, py, pz, e, |
| 1787 | vx, vy, vz, tof, |
| 1788 | polx, poly, polz, |
| 1789 | kPCerenkov, ntr, wgt, 0); |
| 1790 | } |
| 7b203b6e |
1791 | |
| 1792 | void usersteppingckv(Int_t & nphot, Int_t & mreg, Double_t & x, Double_t & y, Double_t & z) |
| 1793 | { |
| 1794 | // |
| 1795 | // Calls stepping in order to signal cerenkov production |
| 1796 | // |
| 1797 | TFluka *fluka = (TFluka*)gMC; |
| 1798 | fluka->SetMreg(mreg); |
| 1799 | fluka->SetXsco(x); |
| 1800 | fluka->SetYsco(y); |
| 1801 | fluka->SetZsco(z); |
| 1802 | fluka->SetNCerenkov(nphot); |
| 1803 | fluka->SetCaller(50); |
| 1804 | printf("userstepping ckv: %10d %10d %13.3f %13.3f %13.2f\n", nphot, mreg, x, y, z); |
| 1805 | (TVirtualMCApplication::Instance())->Stepping(); |
| 1806 | } |
| 3a625972 |
1807 | } |
| 829fb838 |
1808 | |
git://git.uio.no / u / mrichter / AliRoot.git / blame