| 4c039060 |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| 88cb7938 |
16 | /* $Id$ */ |
| 4c039060 |
17 | |
| fe4da5cc |
18 | /////////////////////////////////////////////////////////////////////////////// |
| da3d3acd |
19 | // // |
| 68861244 |
20 | // This class contains the functions for version 0 of the Time Of Flight // |
| fe4da5cc |
21 | // detector. // |
| da3d3acd |
22 | // // |
| 23 | // VERSION WITH 5 MODULES AND TILTED STRIPS // |
| 24 | // NO HITS DEFINED BY DEFAULT FOR THIS VERSION // |
| 25 | // FULL COVERAGE VERSION // |
| 26 | // // |
| 27 | // Authors: // |
| 28 | // // |
| 29 | // Alessio Seganti // |
| 30 | // Domenico Vicinanza // |
| 31 | // // |
| 32 | // University of Salerno - Italy // |
| 33 | // // |
| 34 | // Fabrizio Pierella // |
| 35 | // University of Bologna - Italy // |
| 36 | // // |
| 37 | // // |
| 38 | //Begin_Html // |
| 39 | /* // |
| 40 | <img src="picts/AliTOFv0Class.gif"> // |
| 41 | */ // |
| 42 | //End_Html // |
| fe4da5cc |
43 | // // |
| 44 | /////////////////////////////////////////////////////////////////////////////// |
| 45 | |
| f8014e68 |
46 | #include <Riostream.h> |
| ab76897d |
47 | #include <stdlib.h> |
| 48 | |
| 88cb7938 |
49 | #include <TBRIK.h> |
| 50 | #include <TGeometry.h> |
| 0cc62300 |
51 | #include <TLorentzVector.h> |
| 88cb7938 |
52 | #include <TNode.h> |
| 53 | #include <TObject.h> |
| 54 | #include <TVirtualMC.h> |
| 68861244 |
55 | |
| 88cb7938 |
56 | #include "AliConst.h" |
| 57 | #include "AliRun.h" |
| 58 | #include "AliTOFv0.h" |
| da3d3acd |
59 | #include "AliTOFConstants.h" // AdC |
| 5d12ce38 |
60 | #include "AliMC.h" |
| 3fe3a833 |
61 | |
| fe4da5cc |
62 | ClassImp(AliTOFv0) |
| 63 | |
| 64 | //_____________________________________________________________________________ |
| 151e057e |
65 | AliTOFv0::AliTOFv0() |
| fe4da5cc |
66 | { |
| 67 | // |
| 68 | // Default constructor |
| 69 | // |
| 68861244 |
70 | } |
| 71 | |
| 72 | //_____________________________________________________________________________ |
| 73 | AliTOFv0::AliTOFv0(const char *name, const char *title) |
| 74 | : AliTOF(name,title) |
| 75 | { |
| 76 | // |
| 77 | // Standard constructor |
| 78 | // |
| da39da0c |
79 | // |
| 80 | // Check that FRAME is there otherwise we have no place where to |
| 81 | // put TOF |
| b94fa26c |
82 | AliModule* frame=gAlice->GetModule("FRAME"); |
| 83 | if(!frame) { |
| da39da0c |
84 | Error("Ctor","TOF needs FRAME to be present\n"); |
| 85 | exit(1); |
| 2cef3cb2 |
86 | } else |
| b94fa26c |
87 | if(frame->IsVersion()!=1) { |
| 2cef3cb2 |
88 | Error("Ctor","FRAME version 1 needed with this version of TOF\n"); |
| da39da0c |
89 | exit(1); |
| 90 | } |
| 2cef3cb2 |
91 | |
| 2cef3cb2 |
92 | } |
| b94fa26c |
93 | |
| 94 | //____________________________________________________________________________ |
| 68861244 |
95 | |
| 2cef3cb2 |
96 | void AliTOFv0::BuildGeometry() |
| 97 | { |
| 68861244 |
98 | // |
| 99 | // Build TOF ROOT geometry for the ALICE event display |
| 2cef3cb2 |
100 | // |
| b94fa26c |
101 | TNode *node, *top; |
| 2cef3cb2 |
102 | const int kColorTOF = 27; |
| 9e9add11 |
103 | |
| 2cef3cb2 |
104 | // Find top TNODE |
| b94fa26c |
105 | top = gAlice->GetGeometry()->GetNode("alice"); |
| 9e9add11 |
106 | |
| 2cef3cb2 |
107 | // Position the different copies |
| b94fa26c |
108 | const Float_t krTof =(fRmax+fRmin)/2; |
| 109 | const Float_t khTof = fRmax-fRmin; |
| 110 | const Int_t kNTof = fNTof; |
| 2cef3cb2 |
111 | const Float_t kPi = TMath::Pi(); |
| b94fa26c |
112 | const Float_t kangle = 2*kPi/kNTof; |
| 2cef3cb2 |
113 | Float_t ang; |
| 9e9add11 |
114 | |
| 115 | // define offset for nodes |
| 116 | Float_t zOffsetC = fZtof - fZlenC*0.5; |
| 117 | Float_t zOffsetB = fZtof - fZlenC - fZlenB*0.5; |
| 118 | Float_t zOffsetA = 0.; |
| 2cef3cb2 |
119 | // Define TOF basic volume |
| 120 | |
| b94fa26c |
121 | char nodeName0[7], nodeName1[7], nodeName2[7]; |
| 122 | char nodeName3[7], nodeName4[7], rotMatNum[7]; |
| 9e9add11 |
123 | |
| 2cef3cb2 |
124 | new TBRIK("S_TOF_C","TOF box","void", |
| 9e9add11 |
125 | fStripLn*0.5,khTof*0.5,fZlenC*0.5); |
| 2cef3cb2 |
126 | new TBRIK("S_TOF_B","TOF box","void", |
| 9e9add11 |
127 | fStripLn*0.5,khTof*0.5,fZlenB*0.5); |
| 2cef3cb2 |
128 | new TBRIK("S_TOF_A","TOF box","void", |
| 9e9add11 |
129 | fStripLn*0.5,khTof*0.5,fZlenA*0.5); |
| 130 | |
| b94fa26c |
131 | for (Int_t nodeNum=1;nodeNum<19;nodeNum++){ |
| 9e9add11 |
132 | |
| 133 | if (nodeNum<10) { |
| 134 | sprintf(rotMatNum,"rot50%i",nodeNum); |
| 135 | sprintf(nodeName0,"FTO00%i",nodeNum); |
| 136 | sprintf(nodeName1,"FTO10%i",nodeNum); |
| 137 | sprintf(nodeName2,"FTO20%i",nodeNum); |
| 138 | sprintf(nodeName3,"FTO30%i",nodeNum); |
| 139 | sprintf(nodeName4,"FTO40%i",nodeNum); |
| 140 | } |
| 141 | if (nodeNum>9) { |
| 142 | sprintf(rotMatNum,"rot5%i",nodeNum); |
| 143 | sprintf(nodeName0,"FTO0%i",nodeNum); |
| 144 | sprintf(nodeName1,"FTO1%i",nodeNum); |
| 145 | sprintf(nodeName2,"FTO2%i",nodeNum); |
| 146 | sprintf(nodeName3,"FTO3%i",nodeNum); |
| 147 | sprintf(nodeName4,"FTO4%i",nodeNum); |
| 148 | } |
| 149 | |
| 150 | new TRotMatrix(rotMatNum,rotMatNum,90,-20*nodeNum,90,90-20*nodeNum,0,0); |
| 151 | ang = (4.5-nodeNum) * kangle; |
| 152 | |
| 153 | top->cd(); |
| 154 | node = new TNode(nodeName0,nodeName0,"S_TOF_C",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),zOffsetC,rotMatNum); |
| 155 | node->SetLineColor(kColorTOF); |
| 156 | fNodes->Add(node); |
| 157 | |
| 158 | top->cd(); |
| 159 | node = new TNode(nodeName1,nodeName1,"S_TOF_C",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),-zOffsetC,rotMatNum); |
| 160 | node->SetLineColor(kColorTOF); |
| 161 | fNodes->Add(node); |
| 162 | |
| 163 | top->cd(); |
| 164 | node = new TNode(nodeName2,nodeName2,"S_TOF_B",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),zOffsetB,rotMatNum); |
| 165 | node->SetLineColor(kColorTOF); |
| 166 | fNodes->Add(node); |
| 167 | |
| 168 | top->cd(); |
| 169 | node = new TNode(nodeName3,nodeName3,"S_TOF_B",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),-zOffsetB,rotMatNum); |
| 170 | node->SetLineColor(kColorTOF); |
| 171 | fNodes->Add(node); |
| 172 | |
| 173 | top->cd(); |
| 174 | node = new TNode(nodeName4,nodeName4,"S_TOF_A",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),zOffsetA,rotMatNum); |
| 175 | node->SetLineColor(kColorTOF); |
| 176 | fNodes->Add(node); |
| 68861244 |
177 | } // end loop on nodeNum |
| 2cef3cb2 |
178 | } |
| 179 | |
| 68861244 |
180 | |
| 181 | |
| fe4da5cc |
182 | //_____________________________________________________________________________ |
| 183 | void AliTOFv0::CreateGeometry() |
| 184 | { |
| 185 | // |
| 3fe3a833 |
186 | // Create geometry for Time Of Flight version 0 |
| 187 | // |
| fe4da5cc |
188 | //Begin_Html |
| 189 | /* |
| 1439f98e |
190 | <img src="picts/AliTOFv0.gif"> |
| fe4da5cc |
191 | */ |
| 192 | //End_Html |
| 193 | // |
| 937fe4a4 |
194 | // Creates common geometry |
| fe4da5cc |
195 | // |
| 3fe3a833 |
196 | AliTOF::CreateGeometry(); |
| fe4da5cc |
197 | } |
| 198 | |
| 199 | //_____________________________________________________________________________ |
| 2cef3cb2 |
200 | void AliTOFv0::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenC, |
| 201 | Float_t zlenB, Float_t zlenA, Float_t ztof0) |
| fe4da5cc |
202 | { |
| 203 | // |
| 3fe3a833 |
204 | // Definition of the Time Of Fligh Resistive Plate Chambers |
| 937fe4a4 |
205 | // xFLT, yFLT, zFLT - sizes of TOF modules (large) |
| 3fe3a833 |
206 | |
| 2cef3cb2 |
207 | Float_t ycoor, zcoor; |
| 68861244 |
208 | Float_t par[3]; |
| 209 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 210 | Int_t idrotm[100]; |
| 211 | Int_t nrot = 0; |
| 212 | Float_t hTof = fRmax-fRmin; |
| 3fe3a833 |
213 | |
| b94fa26c |
214 | Float_t radius = fRmin+2.;//cm |
| 937fe4a4 |
215 | |
| 2cef3cb2 |
216 | par[0] = xtof * 0.5; |
| 217 | par[1] = ytof * 0.5; |
| 218 | par[2] = zlenC * 0.5; |
| 219 | gMC->Gsvolu("FTOC", "BOX ", idtmed[506], par, 3); |
| 220 | par[2] = zlenB * 0.5; |
| 221 | gMC->Gsvolu("FTOB", "BOX ", idtmed[506], par, 3); |
| 222 | par[2] = zlenA * 0.5; |
| 223 | gMC->Gsvolu("FTOA", "BOX ", idtmed[506], par, 3); |
| 937fe4a4 |
224 | |
| 225 | |
| 226 | // Positioning of modules |
| 227 | |
| 2cef3cb2 |
228 | Float_t zcor1 = ztof0 - zlenC*0.5; |
| 229 | Float_t zcor2 = ztof0 - zlenC - zlenB*0.5; |
| 937fe4a4 |
230 | Float_t zcor3 = 0.; |
| 231 | |
| 68861244 |
232 | AliMatrix(idrotm[0], 90., 0., 0., 0., 90,-90.); |
| 233 | AliMatrix(idrotm[1], 90.,180., 0., 0., 90, 90.); |
| 2cef3cb2 |
234 | gMC->Gspos("FTOC", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY"); |
| 235 | gMC->Gspos("FTOC", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY"); |
| 236 | gMC->Gspos("FTOC", 1, "BTO2", 0, zcor1, 0, idrotm[0], "ONLY"); |
| 237 | gMC->Gspos("FTOC", 2, "BTO2", 0, -zcor1, 0, idrotm[1], "ONLY"); |
| 238 | gMC->Gspos("FTOC", 1, "BTO3", 0, zcor1, 0, idrotm[0], "ONLY"); |
| 239 | gMC->Gspos("FTOC", 2, "BTO3", 0, -zcor1, 0, idrotm[1], "ONLY"); |
| 240 | |
| 241 | gMC->Gspos("FTOB", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY"); |
| 242 | gMC->Gspos("FTOB", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY"); |
| 243 | gMC->Gspos("FTOB", 1, "BTO2", 0, zcor2, 0, idrotm[0], "ONLY"); |
| 244 | gMC->Gspos("FTOB", 2, "BTO2", 0, -zcor2, 0, idrotm[1], "ONLY"); |
| 245 | gMC->Gspos("FTOB", 1, "BTO3", 0, zcor2, 0, idrotm[0], "ONLY"); |
| 246 | gMC->Gspos("FTOB", 2, "BTO3", 0, -zcor2, 0, idrotm[1], "ONLY"); |
| 247 | |
| 248 | gMC->Gspos("FTOA", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY"); |
| 249 | gMC->Gspos("FTOA", 0, "BTO2", 0, zcor3, 0, idrotm[0], "ONLY"); |
| 250 | gMC->Gspos("FTOA", 0, "BTO3", 0, zcor3, 0, idrotm[0], "ONLY"); |
| 251 | |
| 252 | Float_t db = 0.5;//cm |
| 68861244 |
253 | Float_t xFLT, xFST, yFLT, zFLTA, zFLTB, zFLTC; |
| 2cef3cb2 |
254 | |
| 68861244 |
255 | xFLT = fStripLn; |
| 937fe4a4 |
256 | yFLT = ytof; |
| 68861244 |
257 | zFLTA = zlenA; |
| 258 | zFLTB = zlenB; |
| 259 | zFLTC = zlenC; |
| 260 | |
| 261 | xFST = xFLT-fDeadBndX*2;//cm |
| 2cef3cb2 |
262 | |
| 937fe4a4 |
263 | // Sizes of MRPC pads |
| 264 | |
| 2cef3cb2 |
265 | Float_t yPad = 0.505;//cm |
| 3fe3a833 |
266 | |
| b94fa26c |
267 | // Large not sensitive volumes with Insensitive Freon |
| 2cef3cb2 |
268 | par[0] = xFLT*0.5; |
| 68861244 |
269 | par[1] = yFLT*0.5; |
| b94fa26c |
270 | |
| 68861244 |
271 | cout <<"************************* TOF geometry **************************"<<endl; |
| 272 | |
| 2cef3cb2 |
273 | par[2] = (zFLTA *0.5); |
| b94fa26c |
274 | gMC->Gsvolu("FLTA", "BOX ", idtmed[512], par, 3); // Insensitive Freon |
| 68861244 |
275 | gMC->Gspos ("FLTA", 0, "FTOA", 0., 0., 0., 0, "ONLY"); |
| 276 | |
| 2cef3cb2 |
277 | par[2] = (zFLTB * 0.5); |
| b94fa26c |
278 | gMC->Gsvolu("FLTB", "BOX ", idtmed[512], par, 3); // Insensitive Freon |
| 68861244 |
279 | gMC->Gspos ("FLTB", 0, "FTOB", 0., 0., 0., 0, "ONLY"); |
| 937fe4a4 |
280 | |
| b94fa26c |
281 | par[2] = (zFLTC * 0.5); |
| 282 | gMC->Gsvolu("FLTC", "BOX ", idtmed[512], par, 3); // Insensitive Freon |
| 68861244 |
283 | gMC->Gspos ("FLTC", 0, "FTOC", 0., 0., 0., 0, "ONLY"); |
| 284 | |
| 285 | ////////// Layers of Aluminum before and after detector ////////// |
| b94fa26c |
286 | ////////// Aluminum Box for Modules (2.0 mm thickness) ///////// |
| 287 | ////////// lateral walls not simulated |
| 288 | par[0] = xFLT*0.5; |
| 2cef3cb2 |
289 | par[1] = 0.1;//cm |
| 937fe4a4 |
290 | ycoor = -yFLT/2 + par[1]; |
| b94fa26c |
291 | par[2] = (zFLTA *0.5); |
| 292 | gMC->Gsvolu("FALA", "BOX ", idtmed[508], par, 3); // Alluminium |
| 68861244 |
293 | gMC->Gspos ("FALA", 1, "FLTA", 0., ycoor, 0., 0, "ONLY"); |
| 294 | gMC->Gspos ("FALA", 2, "FLTA", 0.,-ycoor, 0., 0, "ONLY"); |
| b94fa26c |
295 | par[2] = (zFLTB *0.5); |
| 68861244 |
296 | gMC->Gsvolu("FALB", "BOX ", idtmed[508], par, 3); // Alluminium |
| 297 | gMC->Gspos ("FALB", 1, "FLTB", 0., ycoor, 0., 0, "ONLY"); |
| 298 | gMC->Gspos ("FALB", 2, "FLTB", 0.,-ycoor, 0., 0, "ONLY"); |
| b94fa26c |
299 | par[2] = (zFLTC *0.5); |
| 300 | gMC->Gsvolu("FALC", "BOX ", idtmed[508], par, 3); // Alluminium |
| 68861244 |
301 | gMC->Gspos ("FALC", 1, "FLTC", 0., ycoor, 0., 0, "ONLY"); |
| 302 | gMC->Gspos ("FALC", 2, "FLTC", 0.,-ycoor, 0., 0, "ONLY"); |
| 303 | |
| 3fe3a833 |
304 | ///////////////// Detector itself ////////////////////// |
| 68861244 |
305 | const Float_t kdeadBound = fDeadBndZ; //cm non-sensitive between the pad edge |
| 306 | //and the boundary of the strip |
| 307 | const Int_t knx = fNpadX; // number of pads along x |
| 308 | const Int_t knz = fNpadZ; // number of pads along z |
| 309 | const Float_t kspace = fSpace; //cm distance from the front plate of the box |
| 310 | |
| 311 | Float_t zSenStrip = fZpad*fNpadZ;//cm |
| 312 | Float_t stripWidth = zSenStrip + 2*kdeadBound; |
| 313 | par[0] = xFLT*0.5; |
| 314 | par[1] = yPad*0.5; |
| 315 | par[2] = stripWidth*0.5; |
| 316 | |
| dfacde63 |
317 | // new description for strip volume -double stack strip- |
| b94fa26c |
318 | // -- all constants are expressed in cm |
| 68861244 |
319 | // heigth of different layers |
| b94fa26c |
320 | const Float_t khhony = 1. ; // heigth of HONY Layer |
| 321 | const Float_t khpcby = 0.15 ; // heigth of PCB Layer |
| 322 | const Float_t khmyly = 0.035 ; // heigth of MYLAR Layer |
| 323 | const Float_t khgraphy = 0.02 ; // heigth of GRAPHITE Layer |
| dfacde63 |
324 | const Float_t khglasseiy = 0.17; // 0.6 Ext. Glass + 1.1 i.e. (Int. Glass/2) (mm) |
| b94fa26c |
325 | const Float_t khsensmy = 0.11 ; // heigth of Sensitive Freon Mixture |
| 326 | const Float_t kwsensmz = 2*3.5 ; // cm |
| 327 | const Float_t klsensmx = 48*2.5; // cm |
| 328 | const Float_t kwpadz = 3.5; // cm z dimension of the FPAD volume |
| 329 | const Float_t klpadx = 2.5; // cm x dimension of the FPAD volume |
| 68861244 |
330 | |
| b94fa26c |
331 | // heigth of the FSTR Volume (the strip volume) |
| dfacde63 |
332 | const Float_t khstripy = 2*khhony+3*khpcby+4*(khmyly+khgraphy+khglasseiy)+2*khsensmy; |
| b94fa26c |
333 | // width of the FSTR Volume (the strip volume) |
| 68861244 |
334 | const Float_t kwstripz = 10.; |
| b94fa26c |
335 | // length of the FSTR Volume (the strip volume) |
| 336 | const Float_t klstripx = 122.; |
| 937fe4a4 |
337 | |
| b94fa26c |
338 | Float_t parfp[3]={klstripx*0.5,khstripy*0.5,kwstripz*0.5}; |
| 339 | // coordinates of the strip center in the strip reference frame; used for positioning |
| 340 | // internal strip volumes |
| 68861244 |
341 | Float_t posfp[3]={0.,0.,0.}; |
| dfacde63 |
342 | |
| 937fe4a4 |
343 | |
| b94fa26c |
344 | // FSTR volume definition and filling this volume with non sensitive Gas Mixture |
| 345 | gMC->Gsvolu("FSTR","BOX",idtmed[512],parfp,3); |
| 346 | //-- HONY Layer definition |
| 347 | // parfp[0] = -1; |
| 348 | parfp[1] = khhony*0.5; |
| 349 | // parfp[2] = -1; |
| 350 | gMC->Gsvolu("FHON","BOX",idtmed[503],parfp,3); |
| 351 | // positioning 2 HONY Layers on FSTR volume |
| dfacde63 |
352 | |
| b94fa26c |
353 | posfp[1]=-khstripy*0.5+parfp[1]; |
| 354 | gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 68861244 |
355 | gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| dfacde63 |
356 | |
| 68861244 |
357 | //-- PCB Layer definition |
| b94fa26c |
358 | parfp[1] = khpcby*0.5; |
| 359 | gMC->Gsvolu("FPCB","BOX",idtmed[504],parfp,3); |
| 360 | // positioning 2 PCB Layers on FSTR volume |
| 361 | posfp[1]=-khstripy*0.5+khhony+parfp[1]; |
| 362 | gMC->Gspos("FPCB",1,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 363 | gMC->Gspos("FPCB",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| dfacde63 |
364 | // positioning the central PCB layer |
| 365 | gMC->Gspos("FPCB",3,"FSTR",0.,0.,0.,0,"ONLY"); |
| 366 | |
| 367 | |
| 368 | |
| b94fa26c |
369 | //-- MYLAR Layer definition |
| 370 | parfp[1] = khmyly*0.5; |
| 371 | gMC->Gsvolu("FMYL","BOX",idtmed[511],parfp,3); |
| 372 | // positioning 2 MYLAR Layers on FSTR volume |
| 68861244 |
373 | posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1]; |
| b94fa26c |
374 | gMC->Gspos("FMYL",1,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 375 | gMC->Gspos("FMYL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| dfacde63 |
376 | // adding further 2 MYLAR Layers on FSTR volume |
| 377 | posfp[1] = khpcby*0.5+parfp[1]; |
| 378 | gMC->Gspos("FMYL",3,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 379 | gMC->Gspos("FMYL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| 380 | |
| b94fa26c |
381 | |
| 382 | //-- Graphite Layer definition |
| 383 | parfp[1] = khgraphy*0.5; |
| 384 | gMC->Gsvolu("FGRP","BOX",idtmed[502],parfp,3); |
| 385 | // positioning 2 Graphite Layers on FSTR volume |
| 68861244 |
386 | posfp[1] = -khstripy*0.5+khhony+khpcby+khmyly+parfp[1]; |
| b94fa26c |
387 | gMC->Gspos("FGRP",1,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 388 | gMC->Gspos("FGRP",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| dfacde63 |
389 | // adding further 2 Graphite Layers on FSTR volume |
| 390 | posfp[1] = khpcby*0.5+khmyly+parfp[1]; |
| 391 | gMC->Gspos("FGRP",3,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 392 | gMC->Gspos("FGRP",4,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| 393 | |
| 68861244 |
394 | |
| b94fa26c |
395 | //-- Glass (EXT. +Semi INT.) Layer definition |
| 396 | parfp[1] = khglasseiy*0.5; |
| 397 | gMC->Gsvolu("FGLA","BOX",idtmed[514],parfp,3); |
| 68861244 |
398 | // positioning 2 Glass Layers on FSTR volume |
| b94fa26c |
399 | posfp[1] = -khstripy*0.5+khhony+khpcby+khmyly+khgraphy+parfp[1]; |
| 400 | gMC->Gspos("FGLA",1,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 401 | gMC->Gspos("FGLA",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| dfacde63 |
402 | // adding further 2 Glass Layers on FSTR volume |
| 403 | posfp[1] = khpcby*0.5+khmyly+khgraphy+parfp[1]; |
| 404 | gMC->Gspos("FGLA",3,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 405 | gMC->Gspos("FGLA",4,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| 406 | |
| 68861244 |
407 | |
| b94fa26c |
408 | //-- Sensitive Mixture Layer definition |
| 409 | parfp[0] = klsensmx*0.5; |
| 410 | parfp[1] = khsensmy*0.5; |
| dfacde63 |
411 | parfp[2] = kwsensmz*0.5; |
| b94fa26c |
412 | gMC->Gsvolu("FSEN","BOX",idtmed[513],parfp,3); |
| dfacde63 |
413 | gMC->Gsvolu("FNSE","BOX",idtmed[512],parfp,3); |
| 414 | // positioning 2 gas Layers on FSTR volume |
| 415 | // the upper is insensitive freon |
| 416 | // while the remaining is sensitive |
| 417 | posfp[1] = khpcby*0.5+khmyly+khgraphy+khglasseiy+parfp[1]; |
| 418 | gMC->Gspos("FNSE",0,"FSTR", 0., posfp[1],0.,0,"ONLY"); |
| 419 | gMC->Gspos("FSEN",0,"FSTR", 0.,-posfp[1],0.,0,"ONLY"); |
| 68861244 |
420 | |
| b94fa26c |
421 | // dividing FSEN along z in knz=2 and along x in knx=48 |
| 422 | gMC->Gsdvn("FSEZ","FSEN",knz,3); |
| 423 | gMC->Gsdvn("FSEX","FSEZ",knx,1); |
| 68861244 |
424 | |
| b94fa26c |
425 | // FPAD volume definition |
| 68861244 |
426 | parfp[0] = klpadx*0.5; |
| b94fa26c |
427 | parfp[1] = khsensmy*0.5; |
| 428 | parfp[2] = kwpadz*0.5; |
| 429 | gMC->Gsvolu("FPAD","BOX",idtmed[513],parfp,3); |
| 430 | // positioning the FPAD volumes on previous divisions |
| 431 | gMC->Gspos("FPAD",0,"FSEX",0.,0.,0.,0,"ONLY"); |
| 68861244 |
432 | |
| 937fe4a4 |
433 | //// Positioning the Strips (FSTR) in the FLT volumes ///// |
| 434 | |
| 2cef3cb2 |
435 | // Plate A (Central) |
| 436 | |
| 437 | Float_t t = zFLTC+zFLTB+zFLTA*0.5+ 2*db;//Half Width of Barrel |
| 438 | |
| b213b8bd |
439 | Float_t gap = fGapA+0.5; //cm updated distance between the strip axis |
| 937fe4a4 |
440 | Float_t zpos = 0; |
| 2cef3cb2 |
441 | Float_t ang = 0; |
| da3d3acd |
442 | Int_t j=1; // AdC |
| 2cef3cb2 |
443 | nrot = 0; |
| 444 | zcoor = 0; |
| b94fa26c |
445 | ycoor = -14.5 + kspace ; //2 cm over front plate |
| 2cef3cb2 |
446 | |
| 447 | AliMatrix (idrotm[0], 90., 0.,90.,90.,0., 90.); |
| 2cef3cb2 |
448 | |
| da3d3acd |
449 | Int_t centerLoc= (Int_t)(fNStripA/2.) + 1; // AdC |
| 68861244 |
450 | |
| da3d3acd |
451 | //gMC->Gspos("FSTR",j,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY"); |
| 452 | gMC->Gspos("FSTR",centerLoc,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY"); // AdC |
| 453 | if(fDebug>=1) { |
| 454 | printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,j); // AdC |
| 455 | printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos); |
| 456 | } |
| 68861244 |
457 | zcoor -= zSenStrip; |
| da3d3acd |
458 | //j++; // AdC |
| b94fa26c |
459 | Int_t upDown = -1; // upDown=-1 -> Upper strip |
| 460 | // upDown=+1 -> Lower strip |
| 937fe4a4 |
461 | do{ |
| b94fa26c |
462 | ang = atan(zcoor/radius); |
| 2cef3cb2 |
463 | ang *= kRaddeg; |
| 826b71ec |
464 | AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.); |
| 2cef3cb2 |
465 | AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.); |
| 466 | ang /= kRaddeg; |
| b94fa26c |
467 | ycoor = -14.5+ kspace; //2 cm over front plate |
| 468 | ycoor += (1-(upDown+1)/2)*gap; |
| da3d3acd |
469 | //gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY"); |
| 470 | //gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY"); |
| 471 | gMC->Gspos("FSTR",centerLoc-j,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY"); // AdC |
| 472 | gMC->Gspos("FSTR",centerLoc+j,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY"); // AdC |
| 473 | if(fDebug>=1) { |
| 474 | printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,j); // AdC |
| 475 | printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos); |
| 476 | } |
| 477 | //j += 2; // AdC |
| 478 | upDown*= -1; // Alternate strips |
| 479 | zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)- |
| 480 | upDown*gap*TMath::Tan(ang)- |
| 481 | (zSenStrip/2)/TMath::Cos(ang); |
| b94fa26c |
482 | } while (zcoor-(stripWidth/2)*TMath::Cos(ang)>-t+zFLTC+zFLTB+db*2); |
| 937fe4a4 |
483 | |
| 68861244 |
484 | zcoor = zcoor+(zSenStrip/2)/TMath::Cos(ang)+ |
| da3d3acd |
485 | upDown*gap*TMath::Tan(ang)+ |
| 486 | (zSenStrip/2)/TMath::Cos(ang); |
| 487 | |
| 68861244 |
488 | gap = fGapB; |
| 2cef3cb2 |
489 | zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)- |
| da3d3acd |
490 | upDown*gap*TMath::Tan(ang)- |
| 491 | (zSenStrip/2)/TMath::Cos(ang); |
| 492 | |
| b94fa26c |
493 | ang = atan(zcoor/radius); |
| 2cef3cb2 |
494 | ang *= kRaddeg; |
| 495 | AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.); |
| 496 | AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.); |
| 497 | ang /= kRaddeg; |
| 498 | |
| b94fa26c |
499 | ycoor = -14.5+ kspace; //2 cm over front plate |
| 500 | ycoor += (1-(upDown+1)/2)*gap; |
| da3d3acd |
501 | //gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY"); |
| 502 | //gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY"); |
| 503 | gMC->Gspos("FSTR",centerLoc-j,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY"); // AdC |
| 504 | gMC->Gspos("FSTR",centerLoc+j,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY"); // AdC |
| 505 | if(fDebug>=1) { |
| 506 | printf("%s: %f, St. %2i, Pl.3 ",ClassName(),ang*kRaddeg,j); // AdC |
| 507 | printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos); |
| 508 | } |
| 68861244 |
509 | ycoor = -hTof/2.+ kspace;//2 cm over front plate |
| 2cef3cb2 |
510 | |
| 511 | // Plate B |
| 937fe4a4 |
512 | |
| 937fe4a4 |
513 | nrot = 0; |
| da3d3acd |
514 | Int_t i=1; // AdC |
| 68861244 |
515 | upDown = 1; |
| 516 | Float_t deadRegion = 1.0;//cm |
| 2cef3cb2 |
517 | |
| 518 | zpos = zcoor - (zSenStrip/2)/TMath::Cos(ang)- |
| b94fa26c |
519 | upDown*gap*TMath::Tan(ang)- |
| 68861244 |
520 | (zSenStrip/2)/TMath::Cos(ang)- |
| 521 | deadRegion/TMath::Cos(ang); |
| 2cef3cb2 |
522 | |
| b94fa26c |
523 | ang = atan(zpos/radius); |
| 2cef3cb2 |
524 | ang *= kRaddeg; |
| 525 | AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.); |
| 526 | ang /= kRaddeg; |
| 68861244 |
527 | ycoor = -hTof*0.5+ kspace ; //2 cm over front plate |
| b94fa26c |
528 | ycoor += (1-(upDown+1)/2)*gap; |
| 2cef3cb2 |
529 | zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB |
| 530 | gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY"); |
| da3d3acd |
531 | if(fDebug>=1) { |
| 532 | printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i); |
| 533 | printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos); |
| 534 | } |
| 2cef3cb2 |
535 | i++; |
| b94fa26c |
536 | upDown*=-1; |
| 937fe4a4 |
537 | |
| 538 | do { |
| 2cef3cb2 |
539 | zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)- |
| b94fa26c |
540 | upDown*gap*TMath::Tan(ang)- |
| 2cef3cb2 |
541 | (zSenStrip/2)/TMath::Cos(ang); |
| b94fa26c |
542 | ang = atan(zpos/radius); |
| 2cef3cb2 |
543 | ang *= kRaddeg; |
| 826b71ec |
544 | AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.); |
| 2cef3cb2 |
545 | ang /= kRaddeg; |
| b213b8bd |
546 | Float_t deltaSpaceinB=-0.5; // [cm] to avoid overlaps with the end of freon frame |
| 547 | Float_t deltaGapinB=0.5; // [cm] to avoid overlaps in between initial strips |
| 548 | ycoor = -hTof*0.5+ kspace+deltaSpaceinB ; //2 cm over front plate |
| 549 | ycoor += (1-(upDown+1)/2)*(gap+deltaGapinB); |
| 2cef3cb2 |
550 | zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB |
| 551 | gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY"); |
| da3d3acd |
552 | if(fDebug>=1) { |
| 553 | printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i); |
| 554 | printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos); |
| 555 | } |
| b94fa26c |
556 | upDown*=-1; |
| 2cef3cb2 |
557 | i++; |
| 68861244 |
558 | } while (TMath::Abs(ang*kRaddeg)<22.5); |
| 559 | //till we reach a tilting angle of 22.5 degrees |
| 937fe4a4 |
560 | |
| 68861244 |
561 | ycoor = -hTof*0.5+ kspace ; //2 cm over front plate |
| 562 | zpos = zpos - zSenStrip/TMath::Cos(ang); |
| b213b8bd |
563 | // this avoid overlaps in between outer strips in plate B |
| 564 | Float_t deltaMovingUp=0.8; // [cm] |
| 565 | Float_t deltaMovingDown=-0.5; // [cm] |
| 2cef3cb2 |
566 | |
| 567 | do { |
| b94fa26c |
568 | ang = atan(zpos/radius); |
| 2cef3cb2 |
569 | ang *= kRaddeg; |
| 570 | AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.); |
| 571 | ang /= kRaddeg; |
| 572 | zcoor = zpos+(zFLTB/2+zFLTA/2+db); |
| b213b8bd |
573 | gMC->Gspos("FSTR",i, "FLTB", 0., ycoor+deltaMovingDown+deltaMovingUp, zcoor,idrotm[nrot], "ONLY"); |
| 574 | deltaMovingUp+=0.8; // update delta moving toward the end of the plate |
| 937fe4a4 |
575 | zpos = zpos - zSenStrip/TMath::Cos(ang); |
| da3d3acd |
576 | if(fDebug>=1) { |
| 577 | printf("%s: %f, St. %2i, Pl.4 ",ClassName(),ang*kRaddeg,i); |
| 578 | printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos); |
| 579 | } |
| 68861244 |
580 | i++; |
| 581 | } while (zpos-stripWidth*0.5/TMath::Cos(ang)>-t+zFLTC+db); |
| da3d3acd |
582 | |
| 2cef3cb2 |
583 | // Plate C |
| 68861244 |
584 | |
| 585 | zpos = zpos + zSenStrip/TMath::Cos(ang); |
| 2cef3cb2 |
586 | |
| 68861244 |
587 | zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)+ |
| b94fa26c |
588 | gap*TMath::Tan(ang)- |
| 2cef3cb2 |
589 | (zSenStrip/2)/TMath::Cos(ang); |
| 590 | |
| 591 | nrot = 0; |
| 592 | i=0; |
| b213b8bd |
593 | Float_t deltaGap=-2.5; // [cm] update distance from strip center and plate |
| 594 | ycoor= -hTof*0.5+kspace+gap+deltaGap; |
| 937fe4a4 |
595 | |
| 2cef3cb2 |
596 | do { |
| 597 | i++; |
| b94fa26c |
598 | ang = atan(zpos/radius); |
| 2cef3cb2 |
599 | ang *= kRaddeg; |
| 600 | AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.); |
| 601 | ang /= kRaddeg; |
| 602 | zcoor = zpos+(zFLTC*0.5+zFLTB+zFLTA*0.5+db*2); |
| 603 | gMC->Gspos("FSTR",i, "FLTC", 0., ycoor, zcoor,idrotm[nrot], "ONLY"); |
| da3d3acd |
604 | if(fDebug>=1) { |
| 605 | printf("%s: %f, St. %2i, Pl.5 ",ClassName(),ang*kRaddeg,i); |
| 606 | printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos); |
| 607 | } |
| 937fe4a4 |
608 | zpos = zpos - zSenStrip/TMath::Cos(ang); |
| 68861244 |
609 | } while (zpos-stripWidth*TMath::Cos(ang)*0.5>-t); |
| 2cef3cb2 |
610 | |
| 937fe4a4 |
611 | |
| b94fa26c |
612 | ////////// Layers after strips ///////////////// |
| 613 | // honeycomb (Polyethilene) Layer after (1.2cm) |
| 937fe4a4 |
614 | |
| b94fa26c |
615 | Float_t overSpace = fOverSpc;//cm |
| 937fe4a4 |
616 | |
| b94fa26c |
617 | par[0] = xFLT*0.5; |
| 937fe4a4 |
618 | par[1] = 0.6; |
| b94fa26c |
619 | par[2] = (zFLTA *0.5); |
| 620 | ycoor = -yFLT/2 + overSpace + par[1]; |
| 2cef3cb2 |
621 | gMC->Gsvolu("FPEA", "BOX ", idtmed[503], par, 3); // Hony |
| 622 | gMC->Gspos ("FPEA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY"); |
| b94fa26c |
623 | par[2] = (zFLTB *0.5); |
| 2cef3cb2 |
624 | gMC->Gsvolu("FPEB", "BOX ", idtmed[503], par, 3); // Hony |
| 625 | gMC->Gspos ("FPEB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY"); |
| b94fa26c |
626 | par[2] = (zFLTC *0.5); |
| 2cef3cb2 |
627 | gMC->Gsvolu("FPEC", "BOX ", idtmed[503], par, 3); // Hony |
| 628 | gMC->Gspos ("FPEC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY"); |
| 937fe4a4 |
629 | |
| 630 | // Electronics (Cu) after |
| 631 | ycoor += par[1]; |
| b94fa26c |
632 | par[0] = xFLT*0.5; |
| 2cef3cb2 |
633 | par[1] = 1.43*0.05*0.5; // 5% of X0 |
| b94fa26c |
634 | par[2] = (zFLTA *0.5); |
| 937fe4a4 |
635 | ycoor += par[1]; |
| 2cef3cb2 |
636 | gMC->Gsvolu("FECA", "BOX ", idtmed[501], par, 3); // Cu |
| 637 | gMC->Gspos ("FECA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY"); |
| b94fa26c |
638 | par[2] = (zFLTB *0.5); |
| 2cef3cb2 |
639 | gMC->Gsvolu("FECB", "BOX ", idtmed[501], par, 3); // Cu |
| 640 | gMC->Gspos ("FECB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY"); |
| b94fa26c |
641 | par[2] = (zFLTC *0.5); |
| 2cef3cb2 |
642 | gMC->Gsvolu("FECC", "BOX ", idtmed[501], par, 3); // Cu |
| 643 | gMC->Gspos ("FECC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY"); |
| 644 | |
| 645 | // cooling WAter after |
| 937fe4a4 |
646 | ycoor += par[1]; |
| b94fa26c |
647 | par[0] = xFLT*0.5; |
| 2cef3cb2 |
648 | par[1] = 36.1*0.02*0.5; // 2% of X0 |
| b94fa26c |
649 | par[2] = (zFLTA *0.5); |
| 937fe4a4 |
650 | ycoor += par[1]; |
| 2cef3cb2 |
651 | gMC->Gsvolu("FWAA", "BOX ", idtmed[515], par, 3); // Water |
| 652 | gMC->Gspos ("FWAA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY"); |
| b94fa26c |
653 | par[2] = (zFLTB *0.5); |
| 2cef3cb2 |
654 | gMC->Gsvolu("FWAB", "BOX ", idtmed[515], par, 3); // Water |
| 655 | gMC->Gspos ("FWAB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY"); |
| b94fa26c |
656 | par[2] = (zFLTC *0.5); |
| 2cef3cb2 |
657 | gMC->Gsvolu("FWAC", "BOX ", idtmed[515], par, 3); // Water |
| 658 | gMC->Gspos ("FWAC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY"); |
| 659 | |
| b94fa26c |
660 | // frame of Air |
| 661 | ycoor += par[1]; |
| 662 | par[0] = xFLT*0.5; |
| 663 | par[1] = (yFLT/2-ycoor-0.2)*0.5; // Aluminum layer considered (0.2 cm) |
| 664 | par[2] = (zFLTA *0.5); |
| 665 | ycoor += par[1]; |
| 666 | gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air |
| 667 | gMC->Gspos ("FAIA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY"); |
| 668 | par[2] = (zFLTB *0.5); |
| 669 | gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air |
| 670 | gMC->Gspos ("FAIB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY"); |
| 671 | par[2] = (zFLTC *0.5); |
| 672 | gMC->Gsvolu("FAIC", "BOX ", idtmed[500], par, 3); // Air |
| 673 | gMC->Gspos ("FAIC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY"); |
| 674 | /* fp |
| 2cef3cb2 |
675 | //Back Plate honycomb (2cm) |
| 3fe3a833 |
676 | par[0] = -1; |
| 2cef3cb2 |
677 | par[1] = 2 *0.5; |
| 3fe3a833 |
678 | par[2] = -1; |
| 937fe4a4 |
679 | ycoor = yFLT/2 - par[1]; |
| 2cef3cb2 |
680 | gMC->Gsvolu("FBPA", "BOX ", idtmed[503], par, 3); // Hony |
| 681 | gMC->Gspos ("FBPA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY"); |
| 682 | gMC->Gsvolu("FBPB", "BOX ", idtmed[503], par, 3); // Hony |
| 683 | gMC->Gspos ("FBPB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY"); |
| 684 | gMC->Gsvolu("FBPC", "BOX ", idtmed[503], par, 3); // Hony |
| 685 | gMC->Gspos ("FBPC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY"); |
| b94fa26c |
686 | fp */ |
| 3fe3a833 |
687 | } |
| fe4da5cc |
688 | |
| 3fe3a833 |
689 | //_____________________________________________________________________________ |
| 68861244 |
690 | void AliTOFv0::DrawModule() const |
| 3fe3a833 |
691 | { |
| 692 | // |
| 517b7f8f |
693 | // Draw a shaded view of the Time Of Flight version 0 |
| 3fe3a833 |
694 | // |
| fe4da5cc |
695 | // Set everything unseen |
| cfce8870 |
696 | gMC->Gsatt("*", "seen", -1); |
| fe4da5cc |
697 | // |
| 698 | // Set ALIC mother transparent |
| cfce8870 |
699 | gMC->Gsatt("ALIC","SEEN",0); |
| fe4da5cc |
700 | // |
| 701 | // Set the volumes visible |
| 3fe3a833 |
702 | gMC->Gsatt("ALIC","SEEN",0); |
| 2cef3cb2 |
703 | |
| 704 | gMC->Gsatt("FTOA","SEEN",1); |
| 705 | gMC->Gsatt("FTOB","SEEN",1); |
| 706 | gMC->Gsatt("FTOC","SEEN",1); |
| 707 | gMC->Gsatt("FLTA","SEEN",1); |
| 708 | gMC->Gsatt("FLTB","SEEN",1); |
| 709 | gMC->Gsatt("FLTC","SEEN",1); |
| 710 | gMC->Gsatt("FPLA","SEEN",1); |
| 711 | gMC->Gsatt("FPLB","SEEN",1); |
| 712 | gMC->Gsatt("FPLC","SEEN",1); |
| 713 | gMC->Gsatt("FSTR","SEEN",1); |
| 714 | gMC->Gsatt("FPEA","SEEN",1); |
| 715 | gMC->Gsatt("FPEB","SEEN",1); |
| 716 | gMC->Gsatt("FPEC","SEEN",1); |
| 717 | |
| 718 | gMC->Gsatt("FLZ1","SEEN",0); |
| 719 | gMC->Gsatt("FLZ2","SEEN",0); |
| 720 | gMC->Gsatt("FLZ3","SEEN",0); |
| 721 | gMC->Gsatt("FLX1","SEEN",0); |
| 722 | gMC->Gsatt("FLX2","SEEN",0); |
| 723 | gMC->Gsatt("FLX3","SEEN",0); |
| 724 | gMC->Gsatt("FPAD","SEEN",0); |
| 725 | |
| cfce8870 |
726 | gMC->Gdopt("hide", "on"); |
| 727 | gMC->Gdopt("shad", "on"); |
| 728 | gMC->Gsatt("*", "fill", 7); |
| cfce8870 |
729 | gMC->SetClipBox("."); |
| 730 | gMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000); |
| 731 | gMC->DefaultRange(); |
| 732 | gMC->Gdraw("alic", 40, 30, 0, 12, 9.5, .02, .02); |
| 733 | gMC->Gdhead(1111, "Time Of Flight"); |
| 734 | gMC->Gdman(18, 4, "MAN"); |
| 735 | gMC->Gdopt("hide","off"); |
| fe4da5cc |
736 | } |
| 517b7f8f |
737 | //_____________________________________________________________________________ |
| 738 | void AliTOFv0::DrawDetectorModules() |
| 739 | { |
| 740 | // |
| 741 | // Draw a shaded view of the TOF detector version 0 |
| 742 | // |
| 743 | |
| 517b7f8f |
744 | //Set ALIC mother transparent |
| 4c475d27 |
745 | gMC->Gsatt("ALIC","SEEN",0); |
| 517b7f8f |
746 | |
| 747 | // |
| 748 | //Set volumes visible |
| 749 | // |
| 750 | //=====> Level 1 |
| 751 | // Level 1 for TOF volumes |
| 752 | gMC->Gsatt("B077","seen",0); |
| 753 | |
| 754 | |
| 755 | //==========> Level 2 |
| 756 | // Level 2 |
| 757 | gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped - |
| 758 | gMC->Gsatt("B071","seen",0); |
| 759 | gMC->Gsatt("B074","seen",0); |
| 760 | gMC->Gsatt("B075","seen",0); |
| 761 | gMC->Gsatt("B080","seen",0); // B080 does not has sub-level |
| 762 | |
| 763 | |
| 764 | // Level 2 of B071 |
| 765 | gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped - |
| 766 | gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped - |
| 767 | gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped - |
| 768 | gMC->Gsatt("B069","seen",-1); // all B069 sub-levels skipped - |
| 769 | gMC->Gsatt("B056","seen",0); // B056 does not has sub-levels - |
| 770 | gMC->Gsatt("B059","seen",-1); // all B059 sub-levels skipped - |
| 771 | gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped - |
| 772 | gMC->Gsatt("BTR1","seen",0); // BTR1 do not have sub-levels - |
| 773 | gMC->Gsatt("BTO1","seen",0); |
| 774 | |
| 775 | |
| 776 | // Level 2 of B074 |
| 777 | gMC->Gsatt("BTR2","seen",0); // BTR2 does not has sub-levels - |
| 778 | gMC->Gsatt("BTO2","seen",0); |
| 779 | |
| 780 | // Level 2 of B075 |
| 781 | gMC->Gsatt("BTR3","seen",0); // BTR3 do not have sub-levels - |
| 782 | gMC->Gsatt("BTO3","seen",0); |
| 783 | |
| 784 | // ==================> Level 3 |
| 785 | // Level 3 of B071 / Level 2 of BTO1 |
| 786 | gMC->Gsatt("FTOC","seen",-2); |
| 787 | gMC->Gsatt("FTOB","seen",-2); |
| 788 | gMC->Gsatt("FTOA","seen",-2); |
| 789 | |
| 790 | // Level 3 of B074 / Level 2 of BTO2 |
| 791 | // -> cfr previous settings |
| 792 | |
| 793 | // Level 3 of B075 / Level 2 of BTO3 |
| 794 | // -> cfr previous settings |
| 795 | |
| 796 | gMC->Gdopt("hide","on"); |
| 797 | gMC->Gdopt("shad","on"); |
| 798 | gMC->Gsatt("*", "fill", 5); |
| 799 | gMC->SetClipBox("."); |
| 800 | gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000); |
| 801 | gMC->DefaultRange(); |
| 802 | gMC->Gdraw("alic", 45, 40, 0, 10, 10, .015, .015); |
| 803 | gMC->Gdhead(1111,"TOF detector V1"); |
| 804 | gMC->Gdman(18, 4, "MAN"); |
| 805 | gMC->Gdopt("hide","off"); |
| 806 | } |
| 807 | |
| 808 | //_____________________________________________________________________________ |
| 809 | void AliTOFv0::DrawDetectorStrips() |
| 810 | { |
| 811 | // |
| 812 | // Draw a shaded view of the TOF strips for version 0 |
| 813 | // |
| 814 | |
| 517b7f8f |
815 | //Set ALIC mother transparent |
| 4c475d27 |
816 | gMC->Gsatt("ALIC","SEEN",0); |
| 517b7f8f |
817 | |
| 818 | // |
| 819 | //Set volumes visible |
| 820 | //=====> Level 1 |
| 821 | // Level 1 for TOF volumes |
| 822 | gMC->Gsatt("B077","seen",0); |
| 823 | |
| 824 | //==========> Level 2 |
| 825 | // Level 2 |
| 826 | gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped - |
| 827 | gMC->Gsatt("B071","seen",0); |
| 828 | gMC->Gsatt("B074","seen",0); |
| 829 | gMC->Gsatt("B075","seen",0); |
| 830 | gMC->Gsatt("B080","seen",0); // B080 does not has sub-level |
| 831 | |
| 832 | // Level 2 of B071 |
| 833 | gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped - |
| 834 | gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped - |
| 835 | gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped - |
| 836 | gMC->Gsatt("B069","seen",-1); // all B069 sub-levels skipped - |
| 837 | gMC->Gsatt("B056","seen",0); // B056 does not has sub-levels - |
| 838 | gMC->Gsatt("B059","seen",-1); // all B059 sub-levels skipped - |
| 839 | gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped - |
| 840 | gMC->Gsatt("BTR1","seen",0); // BTR1 do not have sub-levels - |
| 841 | gMC->Gsatt("BTO1","seen",0); |
| 842 | |
| 843 | // ==================> Level 3 |
| 844 | // Level 3 of B071 / Level 2 of BTO1 |
| 845 | gMC->Gsatt("FTOC","seen",0); |
| 846 | gMC->Gsatt("FTOB","seen",0); |
| 847 | gMC->Gsatt("FTOA","seen",0); |
| 848 | |
| 849 | // Level 3 of B074 / Level 2 of BTO2 |
| 850 | // -> cfr previous settings |
| 851 | |
| 852 | // Level 3 of B075 / Level 2 of BTO3 |
| 853 | // -> cfr previous settings |
| 854 | |
| 855 | |
| 856 | // ==========================> Level 4 |
| 857 | // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOC |
| 858 | gMC->Gsatt("FLTC","seen",0); |
| 859 | // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOB |
| 860 | gMC->Gsatt("FLTB","seen",0); |
| 861 | // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOA |
| 862 | gMC->Gsatt("FLTA","seen",0); |
| 863 | |
| 864 | // Level 4 of B074 / Level 3 of BTO2 / Level 2 of FTOC |
| 865 | // -> cfr previous settings |
| 866 | // Level 4 of B074 / Level 3 of BTO2 / Level 2 of FTOB |
| 867 | // -> cfr previous settings |
| 868 | |
| 869 | // Level 4 of B075 / Level 3 of BTO3 / Level 2 of FTOC |
| 870 | // -> cfr previous settings |
| 871 | |
| 872 | //======================================> Level 5 |
| 873 | // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOC / Level 2 of FLTC |
| 874 | gMC->Gsatt("FALC","seen",0); // no children for FALC |
| 875 | gMC->Gsatt("FSTR","seen",-2); |
| 876 | gMC->Gsatt("FPEC","seen",0); // no children for FPEC |
| 877 | gMC->Gsatt("FECC","seen",0); // no children for FECC |
| 878 | gMC->Gsatt("FWAC","seen",0); // no children for FWAC |
| 879 | gMC->Gsatt("FAIC","seen",0); // no children for FAIC |
| 880 | |
| 881 | // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOB / Level 2 of FLTB |
| 882 | gMC->Gsatt("FALB","seen",0); // no children for FALB |
| 883 | //--> gMC->Gsatt("FSTR","seen",-2); |
| 884 | |
| 885 | |
| 886 | // -> cfr previous settings |
| 887 | gMC->Gsatt("FPEB","seen",0); // no children for FPEB |
| 888 | gMC->Gsatt("FECB","seen",0); // no children for FECB |
| 889 | gMC->Gsatt("FWAB","seen",0); // no children for FWAB |
| 890 | gMC->Gsatt("FAIB","seen",0); // no children for FAIB |
| 891 | |
| 892 | // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOA / Level 2 of FLTA |
| 893 | gMC->Gsatt("FALA","seen",0); // no children for FALB |
| 894 | //--> gMC->Gsatt("FSTR","seen",-2); |
| 895 | // -> cfr previous settings |
| 896 | gMC->Gsatt("FPEA","seen",0); // no children for FPEA |
| 897 | gMC->Gsatt("FECA","seen",0); // no children for FECA |
| 898 | gMC->Gsatt("FWAA","seen",0); // no children for FWAA |
| 899 | gMC->Gsatt("FAIA","seen",0); // no children for FAIA |
| 900 | |
| 901 | // Level 2 of B074 |
| 902 | gMC->Gsatt("BTR2","seen",0); // BTR2 does not has sub-levels - |
| 903 | gMC->Gsatt("BTO2","seen",0); |
| 904 | |
| 905 | // Level 2 of B075 |
| 906 | gMC->Gsatt("BTR3","seen",0); // BTR3 do not have sub-levels - |
| 907 | gMC->Gsatt("BTO3","seen",0); |
| 908 | |
| 909 | // for others Level 5, cfr. previous settings |
| 910 | |
| 911 | gMC->Gdopt("hide","on"); |
| 912 | gMC->Gdopt("shad","on"); |
| 913 | gMC->Gsatt("*", "fill", 5); |
| 914 | gMC->SetClipBox("."); |
| 915 | gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000); |
| 916 | gMC->DefaultRange(); |
| 917 | gMC->Gdraw("alic", 45, 40, 0, 10, 10, .015, .015); |
| 918 | gMC->Gdhead(1111,"TOF Strips V1"); |
| 919 | gMC->Gdman(18, 4, "MAN"); |
| 920 | gMC->Gdopt("hide","off"); |
| 921 | } |
| fe4da5cc |
922 | |
| 923 | //_____________________________________________________________________________ |
| 924 | void AliTOFv0::CreateMaterials() |
| 925 | { |
| 926 | // |
| 927 | // Define materials for the Time Of Flight |
| 928 | // |
| 929 | AliTOF::CreateMaterials(); |
| 930 | } |
| 931 | |
| 932 | //_____________________________________________________________________________ |
| 933 | void AliTOFv0::Init() |
| 934 | { |
| 935 | // |
| 3fe3a833 |
936 | // Initialise the detector after the geometry has been defined |
| fe4da5cc |
937 | // |
| 68861244 |
938 | printf("**************************************" |
| 939 | " TOF " |
| 940 | "**************************************\n"); |
| 941 | printf("\n Version 0 of TOF initialing, " |
| 942 | "symmetric TOF - Full Coverage version\n"); |
| ab76897d |
943 | |
| fe4da5cc |
944 | AliTOF::Init(); |
| ab76897d |
945 | |
| 2cef3cb2 |
946 | fIdFTOA = gMC->VolId("FTOA"); |
| 947 | fIdFTOB = gMC->VolId("FTOB"); |
| 948 | fIdFTOC = gMC->VolId("FTOC"); |
| 949 | fIdFLTA = gMC->VolId("FLTA"); |
| 950 | fIdFLTB = gMC->VolId("FLTB"); |
| 951 | fIdFLTC = gMC->VolId("FLTC"); |
| ab76897d |
952 | |
| 9e1a0ddb |
953 | if(fDebug) { |
| 954 | printf("%s: **************************************" |
| 955 | " TOF " |
| 956 | "**************************************\n",ClassName()); |
| 957 | } |
| fe4da5cc |
958 | } |
| 959 | |
| 960 | //_____________________________________________________________________________ |
| 961 | void AliTOFv0::StepManager() |
| 962 | { |
| 963 | // |
| 964 | // Procedure called at each step in the Time Of Flight |
| 3fe3a833 |
965 | // |
| 68861244 |
966 | TLorentzVector mom, pos; |
| 967 | Float_t xm[3],pm[3],xpad[3],ppad[3]; |
| 968 | Float_t hits[13],phi,phid,z; |
| 969 | Int_t vol[5]; |
| b94fa26c |
970 | Int_t sector, plate, padx, padz, strip; |
| 971 | Int_t copy, padzid, padxid, stripid, i; |
| 2cef3cb2 |
972 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 68861244 |
973 | Float_t incidenceAngle; |
| 826b71ec |
974 | |
| 975 | if(gMC->GetMedium()==idtmed[513] && |
| 0a6d8768 |
976 | gMC->IsTrackEntering() && gMC->TrackCharge() |
| 826b71ec |
977 | && gMC->CurrentVolID(copy)==fIdSens) |
| 2cef3cb2 |
978 | { |
| 68861244 |
979 | // getting information about hit volumes |
| 826b71ec |
980 | |
| b94fa26c |
981 | padzid=gMC->CurrentVolOffID(2,copy); |
| 982 | padz=copy; |
| 826b71ec |
983 | |
| b94fa26c |
984 | padxid=gMC->CurrentVolOffID(1,copy); |
| 985 | padx=copy; |
| 826b71ec |
986 | |
| b94fa26c |
987 | stripid=gMC->CurrentVolOffID(4,copy); |
| 826b71ec |
988 | strip=copy; |
| 989 | |
| 0a6d8768 |
990 | gMC->TrackPosition(pos); |
| 991 | gMC->TrackMomentum(mom); |
| 826b71ec |
992 | |
| 68861244 |
993 | // Double_t NormPos=1./pos.Rho(); |
| 994 | Double_t normMom=1./mom.Rho(); |
| 826b71ec |
995 | |
| 68861244 |
996 | // getting the cohordinates in pad ref system |
| 997 | xm[0] = (Float_t)pos.X(); |
| 998 | xm[1] = (Float_t)pos.Y(); |
| 999 | xm[2] = (Float_t)pos.Z(); |
| 1000 | |
| 1001 | pm[0] = (Float_t)mom.X()*normMom; |
| 1002 | pm[1] = (Float_t)mom.Y()*normMom; |
| 1003 | pm[2] = (Float_t)mom.Z()*normMom; |
| 1004 | |
| 1005 | gMC->Gmtod(xm,xpad,1); |
| 1006 | gMC->Gmtod(pm,ppad,2); |
| 5919c40c |
1007 | |
| 68861244 |
1008 | incidenceAngle = TMath::ACos(ppad[1])*kRaddeg; |
| 2cef3cb2 |
1009 | |
| 68861244 |
1010 | z = pos[2]; |
| 826b71ec |
1011 | |
| 68861244 |
1012 | plate = 0; |
| da3d3acd |
1013 | if (TMath::Abs(z) <= fZlenA*0.5) plate = 2; //3; // AdC |
| 68861244 |
1014 | if (z < (fZlenA*0.5+fZlenB) && |
| da3d3acd |
1015 | z > fZlenA*0.5) plate = 1; //4; // AdC |
| 68861244 |
1016 | if (z >-(fZlenA*0.5+fZlenB) && |
| da3d3acd |
1017 | z < -fZlenA*0.5) plate = 3; //2; // AdC |
| 1018 | if (z > (fZlenA*0.5+fZlenB)) plate = 0; //5; // AdC |
| 1019 | if (z <-(fZlenA*0.5+fZlenB)) plate = 4; //1; // AdC |
| 1020 | |
| 1021 | if (plate==0) strip=AliTOFConstants::fgkNStripC-strip; // AdC |
| 1022 | else if (plate==1) strip=AliTOFConstants::fgkNStripB-strip; // AdC |
| 1023 | else strip--; // AdC |
| 1024 | |
| 1025 | if (z<=0.) padx=AliTOFConstants::fgkNpadX-padx; // AdC |
| 1026 | else padx--; // AdC |
| 1027 | |
| 1028 | if (plate==3 || plate==4) padz=AliTOFConstants::fgkNpadZ-padz; // AdC |
| 1029 | else padz--; // AdC |
| 68861244 |
1030 | |
| 1031 | phi = pos.Phi(); |
| da3d3acd |
1032 | if (phi>=0.) phid = phi*kRaddeg; //+180.; // AdC |
| 1033 | else phid = phi*kRaddeg + 360.; // AdC |
| 826b71ec |
1034 | sector = Int_t (phid/20.); |
| da3d3acd |
1035 | //sector++; // AdC |
| 826b71ec |
1036 | |
| 0a6d8768 |
1037 | for(i=0;i<3;++i) { |
| 2cef3cb2 |
1038 | hits[i] = pos[i]; |
| 68861244 |
1039 | hits[i+3] = pm[i]; |
| 0a6d8768 |
1040 | } |
| 68861244 |
1041 | |
| 1042 | hits[6] = mom.Rho(); |
| 2cef3cb2 |
1043 | hits[7] = pos[3]; |
| 68861244 |
1044 | hits[8] = xpad[0]; |
| 1045 | hits[9] = xpad[1]; |
| 1046 | hits[10]= xpad[2]; |
| 1047 | hits[11]= incidenceAngle; |
| 1048 | hits[12]= gMC->Edep(); |
| 2cef3cb2 |
1049 | |
| 68861244 |
1050 | vol[0]= sector; |
| 1051 | vol[1]= plate; |
| 1052 | vol[2]= strip; |
| 1053 | vol[3]= padx; |
| 1054 | vol[4]= padz; |
| 1055 | |
| 5d12ce38 |
1056 | AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits); |
| fe4da5cc |
1057 | } |
| 1058 | } |
| b94fa26c |
1059 | |
| 1060 | |
| 1061 | |
| 1062 | |
| 1063 | |
| 1064 | |
git://git.uio.no / u / mrichter / AliRoot.git / blame