| dfef1a15 |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| 16 | /* |
| 17 | $Log$ |
| 5e6c8f3d |
18 | Revision 1.11 2007/10/08 17:52:55 decaro |
| 19 | hole region in front of PHOS detector: update of sectors' numbers |
| 20 | |
| 3c5f55bc |
21 | Revision 1.10 2007/10/07 19:40:46 decaro |
| 22 | right handling of l2t matrices and alignable entries in case of TOF staging geometry |
| 23 | |
| 19dd44a6 |
24 | Revision 1.9 2007/10/07 19:36:29 decaro |
| 25 | TOF materials and volumes description: update |
| 26 | |
| 57df6e96 |
27 | Revision 1.8 2007/10/04 13:15:37 arcelli |
| 28 | updates to comply with AliTOFGeometryV5 becoming AliTOFGeometry |
| 29 | |
| ba66add8 |
30 | Revision 1.7 2007/10/03 18:07:26 arcelli |
| 31 | right handling of l2t matrices and alignable entries in case of TOF holes (Annalisa) |
| 32 | |
| da79abb0 |
33 | Revision 1.6 2007/10/03 10:41:16 arcelli |
| 34 | adding tracking-to-local matrices for new AliTOFcluster |
| 35 | |
| ce352d73 |
36 | Revision 1.5 2007/07/27 08:14:48 morsch |
| 37 | Write all track references into the same branch. |
| 38 | |
| e6add757 |
39 | Revision 1.4 2007/05/29 16:51:05 decaro |
| 40 | Update of the front-end electronics and cooling system description |
| 41 | |
| 9f8488c2 |
42 | Revision 1.3.2 2007/05/29 decaro |
| 43 | FEA+cooling zone description: update |
| 44 | FEA+cooling orientation (side A/ side C) -> correction |
| 45 | Revision 1.3.1 2007/05/24 decaro |
| 46 | Change the FEA+cooling zone description: |
| 47 | - FCA1/FCA2, air boxes, contain: |
| 48 | FFEA volume, G10 box, |
| 49 | FAL1/FAL2/FAL3 volumes, aluminium boxes; |
| 50 | - FRO1/FRO2/FRO3/FRO4/FBAR, aluminum boxes; |
| 51 | - changed FTUB positions; |
| 52 | |
| 53 | Revision 1.3 2007/05/04 14:05:42 decaro |
| 54 | Ineffective comment cleanup |
| 55 | |
| e41ca6a9 |
56 | Revision 1.2 2007/05/04 12:59:22 arcelli |
| 57 | Change the TOF SM paths for misalignment (one layer up) |
| 58 | |
| 6e2570fc |
59 | Revision 1.1 2007/05/02 17:32:58 decaro |
| 60 | TOF geometry description as installed (G. Cara Romeo, A. De Caro) |
| 61 | |
| dfef1a15 |
62 | Revision 0.1 2007 March G. Cara Romeo and A. De Caro |
| 63 | Implemented a more realistic TOF geometry description, |
| 64 | in terms of: |
| 65 | - material badget, |
| 66 | - services and front end electronics description, |
| 67 | - TOF crate readout modules |
| 68 | (added volume FTOS in ALIC_1/BBMO_1/BBCE_%i -for i=1,...,18-, |
| 69 | and in ALIC_1/BFMO_%i -for i=19,...,36- volumes) |
| 70 | As the 5th version in terms of geometrical positioning of volumes. |
| 71 | |
| 72 | */ |
| 73 | |
| 74 | /////////////////////////////////////////////////////////////////////////////// |
| 75 | // // |
| 76 | // This class contains the functions for version 6 of the Time Of Flight // |
| 77 | // detector. // |
| 78 | // // |
| 79 | // VERSION WITH 6 MODULES AND TILTED STRIPS // |
| 80 | // // |
| 81 | // FULL COVERAGE VERSION + OPTION for PHOS holes // |
| 82 | // // |
| 83 | // // |
| 84 | //Begin_Html // |
| 85 | /* // |
| 86 | <img src="picts/AliTOFv6T0Class.gif"> // |
| 87 | */ // |
| 88 | //End_Html // |
| 89 | // // |
| 90 | /////////////////////////////////////////////////////////////////////////////// |
| 91 | |
| f7a1cc68 |
92 | #include <TDirectory.h> |
| 93 | #include <TGeoGlobalMagField.h> |
| 94 | #include <TGeoManager.h> |
| ce352d73 |
95 | #include <TGeoMatrix.h> |
| 96 | #include <TGeoPhysicalNode.h> |
| 97 | #include <TGeoVolume.h> |
| f7a1cc68 |
98 | #include <TLorentzVector.h> |
| 99 | #include <TVirtualMC.h> |
| dfef1a15 |
100 | |
| 101 | #include "AliConst.h" |
| c28a5715 |
102 | #include "AliGeomManager.h" |
| dfef1a15 |
103 | #include "AliLog.h" |
| 104 | #include "AliMagF.h" |
| 105 | #include "AliMC.h" |
| 106 | #include "AliRun.h" |
| e6add757 |
107 | #include "AliTrackReference.h" |
| dfef1a15 |
108 | |
| 109 | #include "AliTOFGeometry.h" |
| dfef1a15 |
110 | #include "AliTOFv6T0.h" |
| 111 | |
| dfef1a15 |
112 | extern TGeoManager *gGeoManager; |
| 113 | |
| 114 | extern AliRun *gAlice; |
| 115 | |
| 116 | ClassImp(AliTOFv6T0) |
| 117 | |
| 5e6c8f3d |
118 | // TOF sectors with Nino masks: 0, 8, 9, 10, 16 |
| 119 | const Bool_t AliTOFv6T0::fgkFEAwithMasks[18] = |
| 120 | {kTRUE , kFALSE, kFALSE, kFALSE, kFALSE, kFALSE, |
| 121 | kFALSE, kFALSE, kTRUE , kTRUE , kTRUE , kFALSE, |
| 122 | kFALSE, kFALSE, kFALSE, kFALSE, kTRUE , kFALSE}; |
| 57df6e96 |
123 | const Float_t AliTOFv6T0::fgkModuleWallThickness = 0.33; // cm |
| 124 | const Float_t AliTOFv6T0::fgkInterCentrModBorder1 = 49.5 ; // cm |
| 125 | const Float_t AliTOFv6T0::fgkInterCentrModBorder2 = 57.5 ; // cm |
| 126 | const Float_t AliTOFv6T0::fgkExterInterModBorder1 = 196.0 ; // cm |
| 127 | const Float_t AliTOFv6T0::fgkExterInterModBorder2 = 203.5 ; // cm |
| fbd27255 |
128 | //const Float_t AliTOFv6T0::fgkLengthInCeModBorder = 7.2 ; // cm // it was 4.7 cm (AdC) |
| 129 | const Float_t AliTOFv6T0::fgkLengthInCeModBorderU = 5.0 ; // cm |
| 130 | const Float_t AliTOFv6T0::fgkLengthInCeModBorderD = 7.0 ; // cm |
| 1879b6a0 |
131 | const Float_t AliTOFv6T0::fgkLengthExInModBorder = 5.0 ; // cm // it was 7.0 cm (AdC) |
| 57df6e96 |
132 | const Float_t AliTOFv6T0::fgkModuleCoverThickness = 2.0 ; // cm |
| 133 | const Float_t AliTOFv6T0::fgkFEAwidth1 = 19.0; // cm |
| 5e6c8f3d |
134 | const Float_t AliTOFv6T0::fgkFEAwidth2 = 39.5;//38.5; // cm |
| 57df6e96 |
135 | const Float_t AliTOFv6T0::fgkSawThickness = 1.0; // cm |
| 136 | const Float_t AliTOFv6T0::fgkCBLw = 13.5; // cm |
| 137 | const Float_t AliTOFv6T0::fgkCBLh1 = 2.0; // cm |
| 138 | const Float_t AliTOFv6T0::fgkCBLh2 = 12.3; // cm |
| 5e6c8f3d |
139 | const Float_t AliTOFv6T0::fgkBetweenLandMask = 0.1; // cm |
| 140 | const Float_t AliTOFv6T0::fgkAl1parameters[3] = {fgkFEAwidth1*0.5, 0.4, 0.2}; // cm |
| 141 | const Float_t AliTOFv6T0::fgkAl2parameters[3] = {7.25, 0.75, 0.25}; // cm |
| 142 | const Float_t AliTOFv6T0::fgkAl3parameters[3] = {3., 4., 0.1}; // cm |
| 143 | const Float_t AliTOFv6T0::fgkRoof1parameters[3] = {fgkAl1parameters[0], fgkAl1parameters[2], 1.45}; // cm |
| 144 | const Float_t AliTOFv6T0::fgkRoof2parameters[3] = {fgkAl3parameters[0], 0.1, 1.15}; // cm |
| 145 | const Float_t AliTOFv6T0::fgkFEAparameters[3] = {fgkFEAwidth1*0.5, 5.6, 0.1}; // cm |
| 146 | const Float_t AliTOFv6T0::fgkBar[3] = {8.575, 0.6, 0.25}; // cm |
| 147 | const Float_t AliTOFv6T0::fgkBar1[3] = {fgkBar[0], fgkBar[1], 0.1}; // cm |
| 148 | const Float_t AliTOFv6T0::fgkBar2[3] = {fgkBar[0], 0.1, fgkBar[1] - 2.*fgkBar1[2]}; // cm |
| 149 | const Float_t AliTOFv6T0::fgkBarS[3] = {2., fgkBar[1], fgkBar[2]}; // cm |
| 150 | const Float_t AliTOFv6T0::fgkBarS1[3] = {fgkBarS[0], fgkBar1[1], fgkBar1[2]}; // cm |
| 151 | const Float_t AliTOFv6T0::fgkBarS2[3] = {fgkBarS[0], fgkBar2[1], fgkBar2[2]}; // cm |
| 57df6e96 |
152 | |
| dfef1a15 |
153 | //_____________________________________________________________________________ |
| 154 | AliTOFv6T0::AliTOFv6T0(): |
| 155 | fIdFTOA(-1), |
| 156 | fIdFTOB(-1), |
| 157 | fIdFTOC(-1), |
| 158 | fIdFLTA(-1), |
| 159 | fIdFLTB(-1), |
| 4f283355 |
160 | fIdFLTC(-1)//, |
| 161 | //fTOFHoles(kFALSE) |
| dfef1a15 |
162 | { |
| 163 | // |
| 164 | // Default constructor |
| 165 | // |
| 5e6c8f3d |
166 | |
| dfef1a15 |
167 | } |
| 168 | |
| 169 | //_____________________________________________________________________________ |
| 170 | AliTOFv6T0::AliTOFv6T0(const char *name, const char *title): |
| 171 | AliTOF(name,title,"tzero"), |
| 172 | fIdFTOA(-1), |
| 173 | fIdFTOB(-1), |
| 174 | fIdFTOC(-1), |
| 175 | fIdFLTA(-1), |
| 176 | fIdFLTB(-1), |
| 4f283355 |
177 | fIdFLTC(-1)//, |
| 178 | //fTOFHoles(kFALSE) |
| dfef1a15 |
179 | { |
| 180 | // |
| 181 | // Standard constructor |
| 182 | // |
| 4f283355 |
183 | |
| dfef1a15 |
184 | // |
| 185 | // Check that FRAME is there otherwise we have no place where to |
| 186 | // put TOF |
| 187 | |
| 4f283355 |
188 | /* |
| dfef1a15 |
189 | AliModule* frame = (AliModule*)gAlice->GetModule("FRAME"); |
| 4f283355 |
190 | |
| dfef1a15 |
191 | if(!frame) { |
| 192 | AliFatal("TOF needs FRAME to be present"); |
| 4f283355 |
193 | } else { |
| dfef1a15 |
194 | if (fTOFGeometry) delete fTOFGeometry; |
| ba66add8 |
195 | fTOFGeometry = new AliTOFGeometry(); |
| dfef1a15 |
196 | |
| 197 | if(frame->IsVersion()==1) { |
| 198 | AliDebug(1,Form("Frame version %d", frame->IsVersion())); |
| 199 | AliDebug(1,"Full Coverage for TOF"); |
| 4f283355 |
200 | fTOFHoles=false;} |
| dfef1a15 |
201 | else { |
| 202 | AliDebug(1,Form("Frame version %d", frame->IsVersion())); |
| 203 | AliDebug(1,"TOF with Holes for PHOS"); |
| 4f283355 |
204 | fTOFHoles=true;} |
| 205 | |
| dfef1a15 |
206 | } |
| 4f283355 |
207 | */ |
| 208 | |
| 209 | if (fTOFGeometry) delete fTOFGeometry; |
| 210 | fTOFGeometry = new AliTOFGeometry(); |
| dfef1a15 |
211 | fTOFGeometry->SetHoles(fTOFHoles); |
| 212 | |
| 213 | //AliTOF::fTOFGeometry = fTOFGeometry; |
| 214 | |
| 215 | // Save the geometry |
| 216 | TDirectory* saveDir = gDirectory; |
| 33c3c91a |
217 | AliRunLoader::Instance()->CdGAFile(); |
| dfef1a15 |
218 | fTOFGeometry->Write("TOFgeometry"); |
| 219 | saveDir->cd(); |
| 220 | |
| 221 | } |
| 222 | |
| 223 | //_____________________________________________________________________________ |
| 224 | void AliTOFv6T0::AddAlignableVolumes() const |
| 225 | { |
| 226 | // |
| 227 | // Create entries for alignable volumes associating the symbolic volume |
| 228 | // name with the corresponding volume path. Needs to be syncronized with |
| 229 | // eventual changes in the geometry. |
| 230 | // |
| 231 | |
| c28a5715 |
232 | AliGeomManager::ELayerID idTOF = AliGeomManager::kTOF; |
| 233 | Int_t modUID, modnum=0; |
| 234 | |
| dfef1a15 |
235 | TString volPath; |
| 236 | TString symName; |
| 237 | |
| 238 | TString vpL0 = "ALIC_1/B077_1/BSEGMO"; |
| 239 | TString vpL1 = "_1/BTOF"; |
| 240 | TString vpL2 = "_1"; |
| 241 | TString vpL3 = "/FTOA_0"; |
| 242 | TString vpL4 = "/FLTA_0/FSTR_"; |
| 243 | |
| 244 | TString snSM = "TOF/sm"; |
| 245 | TString snSTRIP = "/strip"; |
| 246 | |
| 247 | Int_t nSectors=fTOFGeometry->NSectors(); |
| 248 | Int_t nStrips =fTOFGeometry->NStripA()+ |
| 249 | 2*fTOFGeometry->NStripB()+ |
| 250 | 2*fTOFGeometry->NStripC(); |
| 251 | |
| 252 | // |
| 253 | // The TOF MRPC Strips |
| 254 | // The symbolic names are: TOF/sm00/strip01 |
| 255 | // ... |
| 256 | // TOF/sm17/strip91 |
| 257 | |
| 258 | Int_t imod=0; |
| 259 | |
| 260 | for (Int_t isect = 0; isect < nSectors; isect++) { |
| 261 | for (Int_t istr = 1; istr <= nStrips; istr++) { |
| da79abb0 |
262 | |
| e86c4f42 |
263 | modUID = AliGeomManager::LayerToVolUID(idTOF, modnum++); |
| c28a5715 |
264 | if (fTOFSectors[isect]==-1) continue; |
| 19dd44a6 |
265 | |
| 3c5f55bc |
266 | if (fTOFHoles && (isect==13 || isect==14 || isect==15)) { |
| da79abb0 |
267 | if (istr<39) { |
| 268 | vpL3 = "/FTOB_0"; |
| 269 | vpL4 = "/FLTB_0/FSTR_"; |
| 270 | } |
| 271 | else if (istr>53) { |
| 272 | vpL3 = "/FTOC_0"; |
| 273 | vpL4 = "/FLTC_0/FSTR_"; |
| 274 | } |
| 275 | else continue; |
| 276 | } |
| 277 | else { |
| 278 | vpL3 = "/FTOA_0"; |
| 279 | vpL4 = "/FLTA_0/FSTR_"; |
| 280 | } |
| 281 | |
| dfef1a15 |
282 | volPath = vpL0; |
| 283 | volPath += isect; |
| 284 | volPath += vpL1; |
| 285 | volPath += isect; |
| 286 | volPath += vpL2; |
| 287 | volPath += vpL3; |
| 288 | volPath += vpL4; |
| 289 | volPath += istr; |
| 290 | |
| 291 | |
| 292 | symName = snSM; |
| 293 | symName += Form("%02d",isect); |
| 294 | symName += snSTRIP; |
| 295 | symName += Form("%02d",istr); |
| 296 | |
| 297 | AliDebug(2,"--------------------------------------------"); |
| 298 | AliDebug(2,Form("Alignable object %d", imod)); |
| 299 | AliDebug(2,Form("volPath=%s\n",volPath.Data())); |
| 300 | AliDebug(2,Form("symName=%s\n",symName.Data())); |
| 301 | AliDebug(2,"--------------------------------------------"); |
| 302 | |
| c28a5715 |
303 | if(!gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data(),modUID)) |
| 304 | AliError(Form("Alignable entry %s not set",symName.Data())); |
| ce352d73 |
305 | |
| 306 | //T2L matrices for alignment |
| c28a5715 |
307 | TGeoPNEntry *e = gGeoManager->GetAlignableEntryByUID(modUID); |
| ce352d73 |
308 | if (e) { |
| c28a5715 |
309 | TGeoHMatrix *globMatrix = e->GetGlobalOrig(); |
| ce352d73 |
310 | Double_t phi = 20.0 * (isect % 18) + 10.0; |
| 311 | TGeoHMatrix *t2l = new TGeoHMatrix(); |
| 312 | t2l->RotateZ(phi); |
| 313 | t2l->MultiplyLeft(&(globMatrix->Inverse())); |
| 314 | e->SetMatrix(t2l); |
| 315 | } |
| 316 | else { |
| 317 | AliError(Form("Alignable entry %s is not valid!",symName.Data())); |
| 318 | } |
| dfef1a15 |
319 | imod++; |
| 320 | } |
| 321 | } |
| 322 | |
| 323 | |
| 324 | // |
| 325 | // The TOF supermodules |
| 326 | // The symbolic names are: TOF/sm00 |
| 327 | // ... |
| 328 | // TOF/sm17 |
| 329 | // |
| 330 | for (Int_t isect = 0; isect < nSectors; isect++) { |
| 331 | |
| 332 | volPath = vpL0; |
| 333 | volPath += isect; |
| 334 | volPath += vpL1; |
| 335 | volPath += isect; |
| 336 | volPath += vpL2; |
| dfef1a15 |
337 | |
| 338 | symName = snSM; |
| 339 | symName += Form("%02d",isect); |
| 340 | |
| c28a5715 |
341 | AliDebug(2,"--------------------------------------------"); |
| 342 | AliDebug(2,Form("Alignable object %d", isect+imod)); |
| 343 | AliDebug(2,Form("volPath=%s\n",volPath.Data())); |
| 344 | AliDebug(2,Form("symName=%s\n",symName.Data())); |
| 345 | AliDebug(2,"--------------------------------------------"); |
| 346 | |
| dfef1a15 |
347 | gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data()); |
| 348 | |
| 349 | } |
| 350 | |
| dfef1a15 |
351 | } |
| 352 | |
| 353 | //_____________________________________________________________________________ |
| 354 | void AliTOFv6T0::CreateGeometry() |
| 355 | { |
| 356 | // |
| 357 | // Create geometry for Time Of Flight version 0 |
| 358 | // |
| 359 | //Begin_Html |
| 360 | /* |
| 361 | <img src="picts/AliTOFv6T0.gif"> |
| 362 | */ |
| 363 | //End_Html |
| 364 | // |
| 365 | // Creates common geometry |
| 366 | // |
| 367 | AliTOF::CreateGeometry(); |
| 368 | } |
| 369 | |
| 370 | |
| 371 | //_____________________________________________________________________________ |
| 372 | void AliTOFv6T0::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenA) |
| 373 | { |
| 374 | // |
| 375 | // Definition of the Time Of Fligh Resistive Plate Chambers |
| 376 | // |
| 377 | |
| dfef1a15 |
378 | AliDebug(1, "************************* TOF geometry **************************"); |
| 4682c56e |
379 | AliDebug(1,Form(" xtof %f", xtof)); |
| 380 | AliDebug(1,Form(" ytof %f", ytof)); |
| 381 | AliDebug(1,Form(" zlenA %f", zlenA)); |
| 382 | AliDebug(2,Form(" zlenA*0.5 = %f", zlenA*0.5)); |
| 57df6e96 |
383 | |
| 384 | Float_t xFLT, yFLT, zFLTA; |
| 385 | xFLT = xtof - 2.*fgkModuleWallThickness; |
| 386 | yFLT = ytof*0.5 - fgkModuleWallThickness; |
| 387 | zFLTA = zlenA - 2.*fgkModuleWallThickness; |
| 388 | |
| 389 | CreateModules(xtof, ytof, zlenA, xFLT, yFLT, zFLTA); |
| 390 | MakeStripsInModules(ytof, zlenA); |
| 391 | |
| 392 | CreateModuleCovers(xtof, zlenA); |
| 393 | |
| 394 | CreateBackZone(xtof, ytof, zlenA); |
| 5e6c8f3d |
395 | MakeFrontEndElectronics(xtof); |
| 396 | MakeFEACooling(xtof); |
| 397 | MakeNinoMask(xtof); |
| 57df6e96 |
398 | MakeSuperModuleCooling(xtof, ytof, zlenA); |
| 399 | MakeSuperModuleServices(xtof, ytof, zlenA); |
| 400 | |
| 401 | MakeModulesInBTOFvolumes(ytof, zlenA); |
| 402 | MakeCoversInBTOFvolumes(); |
| 403 | MakeBackInBTOFvolumes(ytof); |
| 404 | |
| 405 | MakeReadoutCrates(ytof); |
| 406 | |
| 407 | } |
| 408 | |
| 409 | //_____________________________________________________________________________ |
| 410 | void AliTOFv6T0::CreateModules(Float_t xtof, Float_t ytof, Float_t zlenA, |
| 411 | Float_t xFLT, Float_t yFLT, Float_t zFLTA) const |
| 412 | { |
| 413 | // |
| 414 | // Create supermodule volume |
| 415 | // and wall volumes to separate 5 modules |
| 416 | // |
| 417 | |
| 418 | const Float_t kPi = TMath::Pi(); |
| 419 | |
| 57df6e96 |
420 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 421 | |
| a3b608e8 |
422 | Int_t idrotm[8]; for (Int_t ii=0; ii<8; ii++) idrotm[ii]=0; |
| 57df6e96 |
423 | |
| 5e6c8f3d |
424 | // Definition of the of fibre glass modules (FTOA, FTOB and FTOC) |
| 57df6e96 |
425 | Float_t par[3]; |
| dfef1a15 |
426 | par[0] = xtof * 0.5; |
| 427 | par[1] = ytof * 0.25; |
| 428 | par[2] = zlenA * 0.5; |
| 57df6e96 |
429 | gMC->Gsvolu("FTOA", "BOX ", idtmed[503], par, 3); // Fibre glass |
| 430 | |
| dfef1a15 |
431 | if (fTOFHoles) { |
| 432 | par[0] = xtof * 0.5; |
| 433 | par[1] = ytof * 0.25; |
| 57df6e96 |
434 | par[2] = (zlenA*0.5 - fgkInterCentrModBorder1)*0.5; |
| 435 | gMC->Gsvolu("FTOB", "BOX ", idtmed[503], par, 3); // Fibre glass |
| 436 | gMC->Gsvolu("FTOC", "BOX ", idtmed[503], par, 3); // Fibre glass |
| dfef1a15 |
437 | } |
| 438 | |
| dfef1a15 |
439 | |
| 440 | // Definition and positioning |
| 441 | // of the not sensitive volumes with Insensitive Freon (FLTA, FLTB and FLTC) |
| dfef1a15 |
442 | par[0] = xFLT*0.5; |
| 443 | par[1] = yFLT*0.5; |
| 444 | par[2] = zFLTA*0.5; |
| 57df6e96 |
445 | gMC->Gsvolu("FLTA", "BOX ", idtmed[506], par, 3); // Freon mix |
| dfef1a15 |
446 | |
| 57df6e96 |
447 | Float_t xcoor, ycoor, zcoor; |
| dfef1a15 |
448 | xcoor = 0.; |
| 57df6e96 |
449 | ycoor = fgkModuleWallThickness*0.5; |
| dfef1a15 |
450 | zcoor = 0.; |
| 451 | gMC->Gspos ("FLTA", 0, "FTOA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 452 | |
| 453 | if (fTOFHoles) { |
| 57df6e96 |
454 | par[2] = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5; |
| 455 | gMC->Gsvolu("FLTB", "BOX ", idtmed[506], par, 3); // Freon mix |
| 456 | gMC->Gsvolu("FLTC", "BOX ", idtmed[506], par, 3); // Freon mix |
| dfef1a15 |
457 | |
| 458 | //xcoor = 0.; |
| 57df6e96 |
459 | //ycoor = fgkModuleWallThickness*0.5; |
| 460 | zcoor = fgkModuleWallThickness; |
| dfef1a15 |
461 | gMC->Gspos ("FLTB", 0, "FTOB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 57df6e96 |
462 | gMC->Gspos ("FLTC", 0, "FTOC", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| dfef1a15 |
463 | } |
| 464 | |
| dfef1a15 |
465 | // Definition and positioning |
| 466 | // of the fibre glass walls between central and intermediate modules (FWZ1 and FWZ2) |
| 57df6e96 |
467 | Float_t alpha, tgal, beta, tgbe, trpa[11]; |
| fbd27255 |
468 | //tgal = (yFLT - 2.*fgkLengthInCeModBorder)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1); |
| 469 | tgal = (yFLT - fgkLengthInCeModBorderU - fgkLengthInCeModBorderD)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1); |
| dfef1a15 |
470 | alpha = TMath::ATan(tgal); |
| 57df6e96 |
471 | beta = (kPi*0.5 - alpha)*0.5; |
| 472 | tgbe = TMath::Tan(beta); |
| dfef1a15 |
473 | trpa[0] = xFLT*0.5; |
| 474 | trpa[1] = 0.; |
| 475 | trpa[2] = 0.; |
| 57df6e96 |
476 | trpa[3] = 2.*fgkModuleWallThickness; |
| fbd27255 |
477 | //trpa[4] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 478 | //trpa[5] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 479 | trpa[4] = (fgkLengthInCeModBorderD - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 480 | trpa[5] = (fgkLengthInCeModBorderD + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| dfef1a15 |
481 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 57df6e96 |
482 | trpa[7] = 2.*fgkModuleWallThickness; |
| fbd27255 |
483 | trpa[8] = (fgkLengthInCeModBorderD - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 484 | trpa[9] = (fgkLengthInCeModBorderD + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 485 | //trpa[8] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 486 | //trpa[9] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| dfef1a15 |
487 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| fbd27255 |
488 | gMC->Gsvolu("FWZ1D", "TRAP", idtmed[503], trpa, 11); // Fibre glass |
| dfef1a15 |
489 | |
| 57df6e96 |
490 | AliMatrix (idrotm[0],90., 90.,180.,0.,90.,180.); |
| 491 | AliMatrix (idrotm[1],90., 90., 0.,0.,90., 0.); |
| dfef1a15 |
492 | |
| 57df6e96 |
493 | //xcoor = 0.; |
| fbd27255 |
494 | //ycoor = -(yFLT - fgkLengthInCeModBorder)*0.5; |
| 495 | ycoor = -(yFLT - fgkLengthInCeModBorderD)*0.5; |
| 57df6e96 |
496 | zcoor = fgkInterCentrModBorder1; |
| fbd27255 |
497 | gMC->Gspos("FWZ1D", 1, "FLTA", xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 498 | gMC->Gspos("FWZ1D", 2, "FLTA", xcoor, ycoor,-zcoor, idrotm[1], "ONLY"); |
| 57df6e96 |
499 | |
| 500 | Float_t y0B, ycoorB, zcoorB; |
| 501 | |
| 502 | if (fTOFHoles) { |
| fbd27255 |
503 | //y0B = fgkLengthInCeModBorder - fgkModuleWallThickness*tgbe; |
| 504 | y0B = fgkLengthInCeModBorderD - fgkModuleWallThickness*tgbe; |
| 57df6e96 |
505 | trpa[0] = xFLT*0.5; |
| 506 | trpa[1] = 0.; |
| 507 | trpa[2] = 0.; |
| 508 | trpa[3] = fgkModuleWallThickness; |
| 509 | trpa[4] = (y0B - fgkModuleWallThickness*tgbe)*0.5; |
| 510 | trpa[5] = (y0B + fgkModuleWallThickness*tgbe)*0.5; |
| 511 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 512 | trpa[7] = fgkModuleWallThickness; |
| 513 | trpa[8] = (y0B - fgkModuleWallThickness*tgbe)*0.5; |
| 514 | trpa[9] = (y0B + fgkModuleWallThickness*tgbe)*0.5; |
| 515 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 516 | //xcoor = 0.; |
| 517 | ycoorB = ycoor - fgkModuleWallThickness*0.5*tgbe; |
| 518 | zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 - 2.*fgkModuleWallThickness; |
| fbd27255 |
519 | gMC->Gsvolu("FWZAD", "TRAP", idtmed[503], trpa, 11); // Fibre glass |
| 520 | gMC->Gspos("FWZAD", 1, "FLTB", xcoor, ycoorB, zcoorB, idrotm[1], "ONLY"); |
| 521 | gMC->Gspos("FWZAD", 2, "FLTC", xcoor, ycoorB,-zcoorB, idrotm[0], "ONLY"); |
| 57df6e96 |
522 | } |
| dfef1a15 |
523 | |
| fbd27255 |
524 | |
| 525 | |
| 526 | tgal = (yFLT - fgkLengthInCeModBorderU - fgkLengthInCeModBorderD)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1); |
| 527 | alpha = TMath::ATan(tgal); |
| 528 | beta = (kPi*0.5 - alpha)*0.5; |
| 529 | tgbe = TMath::Tan(beta); |
| 530 | trpa[0] = xFLT*0.5; |
| 531 | trpa[1] = 0.; |
| 532 | trpa[2] = 0.; |
| 533 | trpa[3] = 2.*fgkModuleWallThickness; |
| 534 | //trpa[4] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 535 | //trpa[5] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 536 | trpa[4] = (fgkLengthInCeModBorderU - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 537 | trpa[5] = (fgkLengthInCeModBorderU + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 538 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 539 | trpa[7] = 2.*fgkModuleWallThickness; |
| 540 | trpa[8] = (fgkLengthInCeModBorderU - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 541 | trpa[9] = (fgkLengthInCeModBorderU + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 542 | //trpa[8] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 543 | //trpa[9] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 544 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 545 | gMC->Gsvolu("FWZ1U", "TRAP", idtmed[503], trpa, 11); // Fibre glass |
| 546 | |
| 547 | |
| dfef1a15 |
548 | AliMatrix (idrotm[2],90.,270., 0.,0.,90.,180.); |
| 57df6e96 |
549 | AliMatrix (idrotm[3],90.,270.,180.,0.,90., 0.); |
| dfef1a15 |
550 | |
| 57df6e96 |
551 | //xcoor = 0.; |
| fbd27255 |
552 | //ycoor = (yFLT - fgkLengthInCeModBorder)*0.5; |
| 553 | ycoor = (yFLT - fgkLengthInCeModBorderU)*0.5; |
| 57df6e96 |
554 | zcoor = fgkInterCentrModBorder2; |
| fbd27255 |
555 | gMC->Gspos("FWZ1U", 1, "FLTA", xcoor, ycoor, zcoor,idrotm[2], "ONLY"); |
| 556 | gMC->Gspos("FWZ1U", 2, "FLTA", xcoor, ycoor,-zcoor,idrotm[3], "ONLY"); |
| 57df6e96 |
557 | |
| 558 | if (fTOFHoles) { |
| fbd27255 |
559 | //y0B = fgkLengthInCeModBorder + fgkModuleWallThickness*tgbe; |
| 560 | y0B = fgkLengthInCeModBorderU + fgkModuleWallThickness*tgbe; |
| 57df6e96 |
561 | trpa[0] = xFLT*0.5; |
| 562 | trpa[1] = 0.; |
| 563 | trpa[2] = 0.; |
| 564 | trpa[3] = fgkModuleWallThickness; |
| 565 | trpa[4] = (y0B - fgkModuleWallThickness*tgbe)*0.5; |
| 566 | trpa[5] = (y0B + fgkModuleWallThickness*tgbe)*0.5; |
| 567 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 568 | trpa[7] = fgkModuleWallThickness; |
| 569 | trpa[8] = (y0B - fgkModuleWallThickness*tgbe)*0.5; |
| 570 | trpa[9] = (y0B + fgkModuleWallThickness*tgbe)*0.5; |
| 571 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| fbd27255 |
572 | gMC->Gsvolu("FWZBU", "TRAP", idtmed[503], trpa, 11); // Fibre glass |
| 57df6e96 |
573 | //xcoor = 0.; |
| 574 | ycoorB = ycoor - fgkModuleWallThickness*0.5*tgbe; |
| 575 | zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 - |
| 576 | (fgkInterCentrModBorder2 - fgkInterCentrModBorder1) - 2.*fgkModuleWallThickness; |
| fbd27255 |
577 | gMC->Gspos("FWZBU", 1, "FLTB", xcoor, ycoorB, zcoorB, idrotm[3], "ONLY"); |
| 578 | gMC->Gspos("FWZBU", 2, "FLTC", xcoor, ycoorB,-zcoorB, idrotm[2], "ONLY"); |
| 57df6e96 |
579 | } |
| dfef1a15 |
580 | |
| 57df6e96 |
581 | trpa[0] = 0.5*(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)/TMath::Cos(alpha); |
| 582 | trpa[1] = 2.*fgkModuleWallThickness; |
| dfef1a15 |
583 | trpa[2] = xFLT*0.5; |
| 584 | trpa[3] = -beta*kRaddeg; |
| 585 | trpa[4] = 0.; |
| 586 | trpa[5] = 0.; |
| 5e6c8f3d |
587 | gMC->Gsvolu("FWZ2", "PARA", idtmed[503], trpa, 6); // Fibre glass |
| dfef1a15 |
588 | |
| 57df6e96 |
589 | AliMatrix (idrotm[4], alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.); |
| 590 | AliMatrix (idrotm[5],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90., 0.); |
| dfef1a15 |
591 | |
| 57df6e96 |
592 | //xcoor = 0.; |
| fbd27255 |
593 | //ycoor = 0.; |
| 594 | ycoor = (fgkLengthInCeModBorderD - fgkLengthInCeModBorderU)*0.5; |
| 57df6e96 |
595 | zcoor = (fgkInterCentrModBorder2 + fgkInterCentrModBorder1)*0.5; |
| 5e6c8f3d |
596 | gMC->Gspos("FWZ2", 1, "FLTA", xcoor, ycoor, zcoor, idrotm[4], "ONLY"); |
| 597 | gMC->Gspos("FWZ2", 2, "FLTA", xcoor, ycoor,-zcoor, idrotm[5], "ONLY"); |
| 57df6e96 |
598 | |
| 599 | if (fTOFHoles) { |
| 600 | trpa[0] = 0.5*(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)/TMath::Cos(alpha); |
| 601 | trpa[1] = fgkModuleWallThickness; |
| 602 | trpa[2] = xFLT*0.5; |
| 603 | trpa[3] = -beta*kRaddeg; |
| 604 | trpa[4] = 0.; |
| 605 | trpa[5] = 0.; |
| 5e6c8f3d |
606 | gMC->Gsvolu("FWZC", "PARA", idtmed[503], trpa, 6); // Fibre glass |
| 57df6e96 |
607 | //xcoor = 0.; |
| 608 | ycoorB = ycoor - fgkModuleWallThickness*tgbe; |
| 609 | zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 - |
| 610 | (fgkInterCentrModBorder2 - fgkInterCentrModBorder1)*0.5 - 2.*fgkModuleWallThickness; |
| 5e6c8f3d |
611 | gMC->Gspos("FWZC", 1, "FLTB", xcoor, ycoorB, zcoorB, idrotm[5], "ONLY"); |
| 612 | gMC->Gspos("FWZC", 2, "FLTC", xcoor, ycoorB,-zcoorB, idrotm[4], "ONLY"); |
| 57df6e96 |
613 | } |
| 614 | |
| dfef1a15 |
615 | |
| 616 | // Definition and positioning |
| 617 | // of the fibre glass walls between intermediate and lateral modules (FWZ3 and FWZ4) |
| 57df6e96 |
618 | tgal = (yFLT - 2.*fgkLengthExInModBorder)/(fgkExterInterModBorder2 - fgkExterInterModBorder1); |
| dfef1a15 |
619 | alpha = TMath::ATan(tgal); |
| 57df6e96 |
620 | beta = (kPi*0.5 - alpha)*0.5; |
| 621 | tgbe = TMath::Tan(beta); |
| dfef1a15 |
622 | trpa[0] = xFLT*0.5; |
| 623 | trpa[1] = 0.; |
| 624 | trpa[2] = 0.; |
| 57df6e96 |
625 | trpa[3] = 2.*fgkModuleWallThickness; |
| 626 | trpa[4] = (fgkLengthExInModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 627 | trpa[5] = (fgkLengthExInModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| dfef1a15 |
628 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 57df6e96 |
629 | trpa[7] = 2.*fgkModuleWallThickness; |
| 630 | trpa[8] = (fgkLengthExInModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 631 | trpa[9] = (fgkLengthExInModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| dfef1a15 |
632 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 5e6c8f3d |
633 | gMC->Gsvolu("FWZ3", "TRAP", idtmed[503], trpa, 11); // Fibre glass |
| dfef1a15 |
634 | |
| 57df6e96 |
635 | //xcoor = 0.; |
| 636 | ycoor = (yFLT - fgkLengthExInModBorder)*0.5; |
| 637 | zcoor = fgkExterInterModBorder1; |
| 5e6c8f3d |
638 | gMC->Gspos("FWZ3", 1, "FLTA", xcoor, ycoor, zcoor,idrotm[3], "ONLY"); |
| 639 | gMC->Gspos("FWZ3", 2, "FLTA", xcoor, ycoor,-zcoor,idrotm[2], "ONLY"); |
| dfef1a15 |
640 | |
| 641 | if (fTOFHoles) { |
| 642 | //xcoor = 0.; |
| 57df6e96 |
643 | //ycoor = (yFLT - fgkLengthExInModBorder)*0.5; |
| 644 | zcoor = -fgkExterInterModBorder1 + (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5; |
| 5e6c8f3d |
645 | gMC->Gspos("FWZ3", 5, "FLTB", xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 646 | gMC->Gspos("FWZ3", 6, "FLTC", xcoor, ycoor,-zcoor, idrotm[3], "ONLY"); |
| dfef1a15 |
647 | } |
| 648 | |
| 649 | //xcoor = 0.; |
| 57df6e96 |
650 | ycoor = -(yFLT - fgkLengthExInModBorder)*0.5; |
| 651 | zcoor = fgkExterInterModBorder2; |
| 5e6c8f3d |
652 | gMC->Gspos("FWZ3", 3, "FLTA", xcoor, ycoor, zcoor, idrotm[1], "ONLY"); |
| 653 | gMC->Gspos("FWZ3", 4, "FLTA", xcoor, ycoor,-zcoor, idrotm[0], "ONLY"); |
| dfef1a15 |
654 | |
| 655 | if (fTOFHoles) { |
| 656 | //xcoor = 0.; |
| 57df6e96 |
657 | //ycoor = -(yFLT - fgkLengthExInModBorder)*0.5; |
| 658 | zcoor = -fgkExterInterModBorder2 + (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5; |
| 5e6c8f3d |
659 | gMC->Gspos("FWZ3", 7, "FLTB", xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 660 | gMC->Gspos("FWZ3", 8, "FLTC", xcoor, ycoor,-zcoor, idrotm[1], "ONLY"); |
| dfef1a15 |
661 | } |
| 662 | |
| 57df6e96 |
663 | trpa[0] = 0.5*(fgkExterInterModBorder2 - fgkExterInterModBorder1)/TMath::Cos(alpha); |
| 664 | trpa[1] = 2.*fgkModuleWallThickness; |
| dfef1a15 |
665 | trpa[2] = xFLT*0.5; |
| 666 | trpa[3] = -beta*kRaddeg; |
| 667 | trpa[4] = 0.; |
| 668 | trpa[5] = 0.; |
| 5e6c8f3d |
669 | gMC->Gsvolu("FWZ4", "PARA", idtmed[503], trpa, 6); // Fibre glass |
| dfef1a15 |
670 | |
| 57df6e96 |
671 | AliMatrix (idrotm[6],alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.); |
| 672 | AliMatrix (idrotm[7],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90.,0.); |
| dfef1a15 |
673 | |
| 674 | //xcoor = 0.; |
| 675 | ycoor = 0.; |
| 57df6e96 |
676 | zcoor = (fgkExterInterModBorder2 + fgkExterInterModBorder1)*0.5; |
| 5e6c8f3d |
677 | gMC->Gspos("FWZ4", 1, "FLTA", xcoor, ycoor, zcoor, idrotm[7], "ONLY"); |
| 678 | gMC->Gspos("FWZ4", 2, "FLTA", xcoor, ycoor,-zcoor, idrotm[6], "ONLY"); |
| dfef1a15 |
679 | |
| 680 | if (fTOFHoles) { |
| 681 | //xcoor = 0.; |
| 682 | //ycoor = 0.; |
| 57df6e96 |
683 | zcoor = -(fgkExterInterModBorder2 + fgkExterInterModBorder1)*0.5 + |
| 684 | (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5; |
| 5e6c8f3d |
685 | gMC->Gspos("FWZ4", 3, "FLTB", xcoor, ycoor, zcoor, idrotm[6], "ONLY"); |
| 686 | gMC->Gspos("FWZ4", 4, "FLTC", xcoor, ycoor,-zcoor, idrotm[7], "ONLY"); |
| dfef1a15 |
687 | } |
| 688 | |
| 57df6e96 |
689 | } |
| dfef1a15 |
690 | |
| 57df6e96 |
691 | //_____________________________________________________________________________ |
| 692 | void AliTOFv6T0::CreateModuleCovers(Float_t xtof, Float_t zlenA) const |
| 693 | { |
| 694 | // |
| 695 | // Create covers for module: |
| 696 | // per each module zone, defined according to |
| 697 | // fgkInterCentrModBorder2, fgkExterInterModBorder1 and zlenA+2 values, |
| 5e6c8f3d |
698 | // there is a frame of thickness 2cm in Al |
| 57df6e96 |
699 | // and the contained zones in honeycomb of Al. |
| 700 | // There is also an interface layer (1.6mm thichness) |
| 701 | // and plastic and Cu corresponding to the flat cables. |
| 702 | // |
| dfef1a15 |
703 | |
| 57df6e96 |
704 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| dfef1a15 |
705 | |
| 57df6e96 |
706 | Float_t par[3]; |
| 707 | par[0] = xtof*0.5 + 2.; |
| 708 | par[1] = fgkModuleCoverThickness*0.5; |
| 709 | par[2] = zlenA*0.5 + 2.; |
| 710 | gMC->Gsvolu("FPEA", "BOX ", idtmed[500], par, 3); // Air |
| 711 | if (fTOFHoles) gMC->Gsvolu("FPEB", "BOX ", idtmed[500], par, 3); // Air |
| 712 | |
| 713 | const Float_t kAlCoverThickness = 1.5; |
| 714 | const Float_t kInterfaceCardThickness = 0.16; |
| 715 | const Float_t kAlSkinThickness = 0.1; |
| 716 | |
| 717 | //par[0] = xtof*0.5 + 2.; |
| 718 | par[1] = kAlCoverThickness*0.5; |
| 719 | //par[2] = zlenA*0.5 + 2.; |
| 720 | gMC->Gsvolu("FALT", "BOX ", idtmed[504], par, 3); // Al |
| 721 | if (fTOFHoles) gMC->Gsvolu("FALB", "BOX ", idtmed[504], par, 3); // Al |
| 722 | Float_t xcoor, ycoor, zcoor; |
| 723 | xcoor = 0.; |
| 724 | ycoor = 0.; |
| 725 | zcoor = 0.; |
| 726 | gMC->Gspos("FALT", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 727 | if (fTOFHoles) gMC->Gspos("FALB", 0, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| dfef1a15 |
728 | |
| 57df6e96 |
729 | par[0] = xtof*0.5; |
| 730 | //par[1] = kAlCoverThickness*0.5; |
| 731 | par[2] = fgkInterCentrModBorder2 - 2.; |
| 732 | gMC->Gsvolu("FPE1", "BOX ", idtmed[505], par, 3); // Al honeycomb |
| 733 | //xcoor = 0.; |
| 734 | //ycoor = 0.; |
| 735 | //zcoor = 0.; |
| 736 | gMC->Gspos("FPE1", 0, "FALT", xcoor, ycoor, zcoor, 0, "ONLY"); |
| dfef1a15 |
737 | |
| 57df6e96 |
738 | if (fTOFHoles) { |
| 739 | //par[0] = xtof*0.5; |
| 740 | par[1] = kAlCoverThickness*0.5 - kAlSkinThickness; |
| 741 | //par[2] = fgkInterCentrModBorder2 - 2.; |
| 742 | gMC->Gsvolu("FPE4", "BOX ", idtmed[515], par, 3); // Al honeycomb for holes |
| 743 | //xcoor = 0.; |
| 744 | //ycoor = 0.; |
| 745 | //zcoor = 0.; |
| 746 | gMC->Gspos("FPE4", 0, "FALB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 747 | } |
| dfef1a15 |
748 | |
| 57df6e96 |
749 | //par[0] = xtof*0.5; |
| 750 | //par[1] = kAlCoverThickness*0.5; |
| 751 | par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.; |
| 752 | gMC->Gsvolu("FPE2", "BOX ", idtmed[505], par, 3); // Al honeycomb |
| 753 | //xcoor = 0.; |
| 754 | //ycoor = 0.; |
| 755 | zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 756 | gMC->Gspos("FPE2", 1, "FALT", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 757 | gMC->Gspos("FPE2", 2, "FALT", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| dfef1a15 |
758 | |
| 57df6e96 |
759 | if (fTOFHoles) { |
| 760 | //xcoor = 0.; |
| 761 | //ycoor = 0.; |
| 762 | //zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 763 | gMC->Gspos("FPE2", 1, "FALB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 764 | gMC->Gspos("FPE2", 2, "FALB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 765 | } |
| dfef1a15 |
766 | |
| 57df6e96 |
767 | //par[0] = xtof*0.5; |
| 768 | //par[1] = kAlCoverThickness*0.5; |
| 769 | par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.; |
| 770 | gMC->Gsvolu("FPE3", "BOX ", idtmed[505], par, 3); // Al honeycomb |
| 771 | //xcoor = 0.; |
| 772 | //ycoor = 0.; |
| 773 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 774 | gMC->Gspos("FPE3", 1, "FALT", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 775 | gMC->Gspos("FPE3", 2, "FALT", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| dfef1a15 |
776 | |
| 57df6e96 |
777 | if (fTOFHoles) { |
| 778 | //xcoor = 0.; |
| 779 | //ycoor = 0.; |
| 780 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 781 | gMC->Gspos("FPE3", 1, "FALB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 782 | gMC->Gspos("FPE3", 2, "FALB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 783 | } |
| dfef1a15 |
784 | |
| 57df6e96 |
785 | // volumes for Interface cards |
| 786 | par[0] = xtof*0.5; |
| 787 | par[1] = kInterfaceCardThickness*0.5; |
| 788 | par[2] = fgkInterCentrModBorder2 - 2.; |
| 789 | gMC->Gsvolu("FIF1", "BOX ", idtmed[502], par, 3); // G10 |
| 790 | //xcoor = 0.; |
| 791 | ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5; |
| 792 | zcoor = 0.; |
| 793 | gMC->Gspos("FIF1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| dfef1a15 |
794 | |
| 57df6e96 |
795 | //par[0] = xtof*0.5; |
| 796 | //par[1] = kInterfaceCardThickness*0.5; |
| 797 | par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.; |
| 798 | gMC->Gsvolu("FIF2", "BOX ", idtmed[502], par, 3); // G10 |
| 799 | //xcoor = 0.; |
| 800 | //ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5; |
| 801 | zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 802 | gMC->Gspos("FIF2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 803 | gMC->Gspos("FIF2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 804 | if (fTOFHoles) { |
| 805 | gMC->Gspos("FIF2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 806 | gMC->Gspos("FIF2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 807 | } |
| dfef1a15 |
808 | |
| 57df6e96 |
809 | //par[0] = xtof*0.5; |
| 810 | //par[1] = kInterfaceCardThickness*0.5; |
| 811 | par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.; |
| 812 | gMC->Gsvolu("FIF3", "BOX ", idtmed[502], par, 3); // G10 |
| 813 | //xcoor = 0.; |
| 814 | //ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5; |
| 815 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 816 | gMC->Gspos("FIF3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 817 | gMC->Gspos("FIF3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 818 | if (fTOFHoles) { |
| 819 | gMC->Gspos("FIF3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 820 | gMC->Gspos("FIF3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 821 | } |
| dfef1a15 |
822 | |
| 57df6e96 |
823 | // volumes for flat cables |
| 824 | // plastic |
| 5e6c8f3d |
825 | const Float_t kPlasticFlatCableThickness = 0.25; |
| 57df6e96 |
826 | par[0] = xtof*0.5; |
| 827 | par[1] = kPlasticFlatCableThickness*0.5; |
| 828 | par[2] = fgkInterCentrModBorder2 - 2.; |
| 829 | gMC->Gsvolu("FFC1", "BOX ", idtmed[513], par, 3); // Plastic (CH2) |
| 830 | //xcoor = 0.; |
| 831 | ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5; |
| 832 | zcoor = 0.; |
| 833 | gMC->Gspos("FFC1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| dfef1a15 |
834 | |
| 57df6e96 |
835 | //par[0] = xtof*0.5; |
| 836 | //par[1] = kPlasticFlatCableThickness*0.5; |
| 837 | par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.; |
| 838 | gMC->Gsvolu("FFC2", "BOX ", idtmed[513], par, 3); // Plastic (CH2) |
| 839 | //xcoor = 0.; |
| 840 | //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5; |
| 841 | zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 842 | gMC->Gspos("FFC2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 843 | gMC->Gspos("FFC2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 844 | if (fTOFHoles) { |
| 845 | gMC->Gspos("FFC2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 846 | gMC->Gspos("FFC2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| dfef1a15 |
847 | } |
| 848 | |
| 57df6e96 |
849 | //par[0] = xtof*0.5; |
| 850 | //par[1] = kPlasticFlatCableThickness*0.5; |
| 851 | par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.; |
| 852 | gMC->Gsvolu("FFC3", "BOX ", idtmed[513], par, 3); // Plastic (CH2) |
| 853 | //xcoor = 0.; |
| 854 | //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5; |
| 855 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 856 | gMC->Gspos("FFC3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 857 | gMC->Gspos("FFC3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 858 | if (fTOFHoles) { |
| 859 | gMC->Gspos("FFC3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 860 | gMC->Gspos("FFC3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 861 | } |
| dfef1a15 |
862 | |
| 57df6e96 |
863 | // Cu |
| 864 | const Float_t kCopperFlatCableThickness = 0.01; |
| 865 | par[0] = xtof*0.5; |
| 866 | par[1] = kCopperFlatCableThickness*0.5; |
| 867 | par[2] = fgkInterCentrModBorder2 - 2.; |
| 868 | gMC->Gsvolu("FCC1", "BOX ", idtmed[512], par, 3); // Cu |
| 5e6c8f3d |
869 | gMC->Gspos("FCC1", 0, "FFC1", 0., 0., 0., 0, "ONLY"); |
| 9f8488c2 |
870 | |
| 57df6e96 |
871 | //par[0] = xtof*0.5; |
| 872 | //par[1] = kCopperFlatCableThickness*0.5; |
| 873 | par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.; |
| 874 | gMC->Gsvolu("FCC2", "BOX ", idtmed[512], par, 3); // Cu |
| 5e6c8f3d |
875 | gMC->Gspos("FCC2", 0, "FFC2", 0., 0., 0., 0, "ONLY"); |
| 9f8488c2 |
876 | |
| 57df6e96 |
877 | //par[0] = xtof*0.5; |
| 878 | //par[1] = kCopperFlatCableThickness*0.5; |
| 879 | par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.; |
| 880 | gMC->Gsvolu("FCC3", "BOX ", idtmed[512], par, 3); // Cu |
| 5e6c8f3d |
881 | gMC->Gspos("FCC3", 0, "FFC3", 0., 0., 0., 0, "ONLY"); |
| 9f8488c2 |
882 | |
| 57df6e96 |
883 | } |
| 9f8488c2 |
884 | |
| 57df6e96 |
885 | //_____________________________________________________________________________ |
| 886 | void AliTOFv6T0::MakeModulesInBTOFvolumes(Float_t ytof, Float_t zlenA) const |
| 887 | { |
| 888 | // |
| 889 | // Fill BTOF_%i (for i=0,...17) volumes |
| 890 | // with volumes FTOA (MRPC strip container), |
| f12287bf |
891 | // In case of TOF holes, three sectors (i.e. 13th, 14th and 15th) |
| 57df6e96 |
892 | // are filled with volumes: FTOB and FTOC (MRPC containers), |
| 893 | // |
| 894 | |
| 4ec650ac |
895 | const Int_t kSize=16; |
| 896 | |
| a3b608e8 |
897 | Int_t idrotm[1]={0}; |
| 57df6e96 |
898 | |
| 899 | //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.); |
| 900 | AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.); |
| 901 | |
| 902 | Float_t xcoor, ycoor, zcoor; |
| 903 | xcoor = 0.; |
| 904 | |
| 905 | // Positioning of fibre glass modules (FTOA, FTOB and FTOC) |
| 57df6e96 |
906 | for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++){ |
| 907 | if(fTOFSectors[isec]==-1)continue; |
| 4ec650ac |
908 | |
| 909 | char name[kSize]; |
| 910 | snprintf(name, kSize, "BTOF%d",isec); |
| 3c5f55bc |
911 | if (fTOFHoles && (isec==13 || isec==14 || isec==15)) { |
| 57df6e96 |
912 | //xcoor = 0.; |
| 913 | ycoor = (zlenA*0.5 + fgkInterCentrModBorder1)*0.5; |
| 914 | zcoor = -ytof * 0.25; |
| 915 | gMC->Gspos("FTOB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 916 | gMC->Gspos("FTOC", 0, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY"); |
| 917 | } |
| 918 | else { |
| 919 | //xcoor = 0.; |
| 920 | ycoor = 0.; |
| 921 | zcoor = -ytof * 0.25; |
| 922 | gMC->Gspos("FTOA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 923 | } |
| 924 | } |
| 925 | |
| 926 | } |
| 927 | |
| 928 | //_____________________________________________________________________________ |
| 929 | void AliTOFv6T0::MakeCoversInBTOFvolumes() const |
| 930 | { |
| 931 | // |
| 932 | // Fill BTOF_%i (for i=0,...17) volumes |
| 933 | // with volumes FPEA (to separate strips from FEA cards) |
| f12287bf |
934 | // In case of TOF holes, three sectors (i.e. 13th, 14th and 15th) |
| 57df6e96 |
935 | // are filled with FPEB volumes |
| 936 | // (to separate MRPC strips from FEA cards) |
| 937 | // |
| 938 | |
| 4ec650ac |
939 | const Int_t kSize=16; |
| 940 | |
| a3b608e8 |
941 | Int_t idrotm[1]={0}; |
| 57df6e96 |
942 | |
| 943 | //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.); |
| 944 | AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.); |
| 945 | |
| 946 | Float_t xcoor, ycoor, zcoor; |
| 947 | xcoor = 0.; |
| 948 | ycoor = 0.; |
| 949 | zcoor = fgkModuleCoverThickness*0.5; |
| 950 | |
| 4ec650ac |
951 | char name[kSize]; |
| 57df6e96 |
952 | |
| 953 | // Positioning of module covers (FPEA, FPEB) |
| 57df6e96 |
954 | for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { |
| 955 | if(fTOFSectors[isec]==-1)continue; |
| 4ec650ac |
956 | snprintf(name, kSize, "BTOF%d",isec); |
| 3c5f55bc |
957 | if (fTOFHoles && (isec==13 || isec==14 || isec==15)) |
| 57df6e96 |
958 | gMC->Gspos("FPEB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 959 | else |
| 960 | gMC->Gspos("FPEA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 961 | } |
| 962 | |
| 963 | } |
| 964 | |
| 965 | //_____________________________________________________________________________ |
| 966 | void AliTOFv6T0::MakeBackInBTOFvolumes(Float_t ytof) const |
| 967 | { |
| 968 | // |
| 5e6c8f3d |
969 | // Fill BTOF_%i (for i=0,...17) volumes with volumes called FAIA and |
| 970 | // FAIC (FEA cards and services container). |
| 971 | // In case of TOF holes, three sectors (i.e. 13th, 14th and 15th) are |
| 972 | // filled with volumes FAIB (FEA cards and services container). |
| 57df6e96 |
973 | // |
| 974 | |
| 4ec650ac |
975 | const Int_t kSize=16; |
| 976 | |
| a3b608e8 |
977 | Int_t idrotm[1]={0}; |
| 57df6e96 |
978 | |
| 979 | //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.); |
| 980 | AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.); |
| 981 | |
| 982 | Float_t xcoor, ycoor, zcoor; |
| 983 | xcoor = 0.; |
| 984 | ycoor = 0.; |
| 985 | zcoor = fgkModuleCoverThickness + (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 986 | |
| 4ec650ac |
987 | char name[kSize]; |
| 57df6e96 |
988 | |
| 5e6c8f3d |
989 | // Positioning of FEA cards and services containers (FAIA, FAIC and FAIB) |
| 57df6e96 |
990 | for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { |
| 991 | if(fTOFSectors[isec]==-1)continue; |
| 4ec650ac |
992 | snprintf(name, kSize, "BTOF%d",isec); |
| df6f8cc9 |
993 | if (fgkFEAwithMasks[isec]) |
| 994 | gMC->Gspos("FAIA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 5e6c8f3d |
995 | else { |
| 996 | if (fTOFHoles && (isec==13 || isec==14 || isec==15)) |
| 997 | gMC->Gspos("FAIB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 998 | else |
| df6f8cc9 |
999 | gMC->Gspos("FAIC", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 5e6c8f3d |
1000 | } |
| 57df6e96 |
1001 | } |
| 1002 | |
| 1003 | } |
| 1004 | |
| 1005 | //_____________________________________________________________________________ |
| 1006 | void AliTOFv6T0::MakeStripsInModules(Float_t ytof, Float_t zlenA) const |
| 1007 | { |
| 1008 | // |
| 1009 | // Define MRPC strip volume, called FSTR |
| 1010 | // Insert FSTR volume in FLTA/B/C volumes |
| 1011 | // |
| 1012 | |
| 57df6e96 |
1013 | Float_t yFLT = ytof*0.5 - fgkModuleWallThickness; |
| 1014 | |
| 1015 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1016 | |
| 1017 | ///////////////// Detector itself ////////////////////// |
| 1018 | |
| 1019 | const Int_t knx = fTOFGeometry->NpadX(); // number of pads along x |
| 1020 | const Int_t knz = fTOFGeometry->NpadZ(); // number of pads along z |
| 1021 | const Float_t kPadX = fTOFGeometry->XPad(); // pad length along x |
| 1022 | const Float_t kPadZ = fTOFGeometry->ZPad(); // pad length along z |
| 1023 | |
| 1024 | // new description for strip volume -double stack strip- |
| 1025 | // -- all constants are expressed in cm |
| 1026 | // height of different layers |
| 1027 | const Float_t khhony = 1.0; // height of HONY Layer |
| 1028 | const Float_t khpcby = 0.08; // height of PCB Layer |
| 1029 | const Float_t khrgly = 0.055; // height of RED GLASS Layer |
| 1030 | |
| 1031 | const Float_t khfiliy = 0.125; // height of FISHLINE Layer |
| 1032 | const Float_t khglassy = 0.160*0.5; // semi-height of GLASS Layer |
| 1033 | const Float_t khglfy = khfiliy+2.*khglassy; // height of GLASS Layer |
| 1034 | |
| 1035 | const Float_t khcpcby = 0.16; // height of PCB Central Layer |
| 1036 | const Float_t kwhonz = 8.1; // z dimension of HONEY Layer |
| 1037 | const Float_t kwpcbz1 = 10.64; // z dimension of PCB Lower Layer |
| 1038 | const Float_t kwpcbz2 = 11.6; // z dimension of PCB Upper Layer |
| 1039 | const Float_t kwcpcbz = 12.4; // z dimension of PCB Central Layer |
| 1040 | |
| 1041 | const Float_t kwrglz = 8.; // z dimension of RED GLASS Layer |
| 1042 | const Float_t kwglfz = 7.; // z dimension of GLASS Layer |
| 1043 | const Float_t klsensmx = knx*kPadX; // length of Sensitive Layer |
| 1044 | const Float_t khsensmy = 0.0105; // height of Sensitive Layer |
| 1045 | const Float_t kwsensmz = knz*kPadZ; // width of Sensitive Layer |
| 1046 | |
| 1047 | // height of the FSTR Volume (the strip volume) |
| 1048 | const Float_t khstripy = 2.*khhony+2.*khpcby+4.*khrgly+2.*khglfy+khcpcby; |
| 1049 | |
| 1050 | // width of the FSTR Volume (the strip volume) |
| 1051 | const Float_t kwstripz = kwcpcbz; |
| 1052 | // length of the FSTR Volume (the strip volume) |
| 1053 | const Float_t klstripx = fTOFGeometry->StripLength(); |
| 1054 | |
| 1055 | |
| 1056 | // FSTR volume definition-filling this volume with non sensitive Gas Mixture |
| 1057 | Float_t parfp[3]={klstripx*0.5, khstripy*0.5, kwstripz*0.5}; |
| 5e6c8f3d |
1058 | gMC->Gsvolu("FSTR", "BOX", idtmed[506], parfp, 3); // Freon mix |
| 57df6e96 |
1059 | |
| 1060 | Float_t posfp[3]={0.,0.,0.}; |
| 1061 | |
| 1062 | // NOMEX (HONEYCOMB) Layer definition |
| 1063 | //parfp[0] = klstripx*0.5; |
| 1064 | parfp[1] = khhony*0.5; |
| 1065 | parfp[2] = kwhonz*0.5; |
| 5e6c8f3d |
1066 | gMC->Gsvolu("FHON", "BOX", idtmed[501], parfp, 3); // Nomex (Honeycomb) |
| 57df6e96 |
1067 | // positioning 2 NOMEX Layers on FSTR volume |
| 1068 | //posfp[0] = 0.; |
| 1069 | posfp[1] =-khstripy*0.5 + parfp[1]; |
| 1070 | //posfp[2] = 0.; |
| 5e6c8f3d |
1071 | gMC->Gspos("FHON", 1, "FSTR", 0., posfp[1], 0., 0, "ONLY"); |
| 1072 | gMC->Gspos("FHON", 2, "FSTR", 0.,-posfp[1], 0., 0, "ONLY"); |
| 57df6e96 |
1073 | |
| 1074 | // Lower PCB Layer definition |
| 1075 | //parfp[0] = klstripx*0.5; |
| 1076 | parfp[1] = khpcby*0.5; |
| 1077 | parfp[2] = kwpcbz1*0.5; |
| 5e6c8f3d |
1078 | gMC->Gsvolu("FPC1", "BOX", idtmed[502], parfp, 3); // G10 |
| 57df6e96 |
1079 | |
| 1080 | // Upper PCB Layer definition |
| 1081 | //parfp[0] = klstripx*0.5; |
| 1082 | //parfp[1] = khpcby*0.5; |
| 1083 | parfp[2] = kwpcbz2*0.5; |
| 5e6c8f3d |
1084 | gMC->Gsvolu("FPC2", "BOX", idtmed[502], parfp, 3); // G10 |
| 57df6e96 |
1085 | |
| 1086 | // positioning 2 external PCB Layers in FSTR volume |
| 1087 | //posfp[0] = 0.; |
| 1088 | posfp[1] =-khstripy*0.5+khhony+parfp[1]; |
| 1089 | //posfp[2] = 0.; |
| 5e6c8f3d |
1090 | gMC->Gspos("FPC1", 1, "FSTR", 0.,-posfp[1], 0., 0, "ONLY"); |
| 1091 | gMC->Gspos("FPC2", 1, "FSTR", 0., posfp[1], 0., 0, "ONLY"); |
| 57df6e96 |
1092 | |
| 1093 | // Central PCB layer definition |
| 1094 | //parfp[0] = klstripx*0.5; |
| 1095 | parfp[1] = khcpcby*0.5; |
| 1096 | parfp[2] = kwcpcbz*0.5; |
| 5e6c8f3d |
1097 | gMC->Gsvolu("FPCB", "BOX", idtmed[502], parfp, 3); // G10 |
| 1098 | gGeoManager->GetVolume("FPCB")->VisibleDaughters(kFALSE); |
| 57df6e96 |
1099 | // positioning the central PCB layer |
| 5e6c8f3d |
1100 | gMC->Gspos("FPCB", 1, "FSTR", 0., 0., 0., 0, "ONLY"); |
| 57df6e96 |
1101 | |
| 1102 | // Sensitive volume definition |
| 1103 | Float_t parfs[3] = {klsensmx*0.5, khsensmy*0.5, kwsensmz*0.5}; |
| 5e6c8f3d |
1104 | gMC->Gsvolu("FSEN", "BOX", idtmed[507], parfs, 3); // Cu sensitive |
| 57df6e96 |
1105 | // dividing FSEN along z in knz=2 and along x in knx=48 |
| 5e6c8f3d |
1106 | gMC->Gsdvn("FSEZ", "FSEN", knz, 3); |
| 1107 | gMC->Gsdvn("FPAD", "FSEZ", knx, 1); |
| 57df6e96 |
1108 | // positioning sensitive layer inside FPCB |
| 5e6c8f3d |
1109 | gMC->Gspos("FSEN", 1, "FPCB", 0., 0., 0., 0, "ONLY"); |
| 57df6e96 |
1110 | |
| 1111 | // RED GLASS Layer definition |
| 1112 | //parfp[0] = klstripx*0.5; |
| 1113 | parfp[1] = khrgly*0.5; |
| 1114 | parfp[2] = kwrglz*0.5; |
| 5e6c8f3d |
1115 | gMC->Gsvolu("FRGL", "BOX", idtmed[508], parfp, 3); // red glass |
| 57df6e96 |
1116 | // positioning 4 RED GLASS Layers in FSTR volume |
| 1117 | //posfp[0] = 0.; |
| 1118 | posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1]; |
| 1119 | //posfp[2] = 0.; |
| 5e6c8f3d |
1120 | gMC->Gspos("FRGL", 1, "FSTR", 0., posfp[1], 0., 0, "ONLY"); |
| 1121 | gMC->Gspos("FRGL", 4, "FSTR", 0.,-posfp[1], 0., 0, "ONLY"); |
| 57df6e96 |
1122 | //posfp[0] = 0.; |
| 1123 | posfp[1] = (khcpcby+khrgly)*0.5; |
| 1124 | //posfp[2] = 0.; |
| 5e6c8f3d |
1125 | gMC->Gspos("FRGL", 2, "FSTR", 0.,-posfp[1], 0., 0, "ONLY"); |
| 1126 | gMC->Gspos("FRGL", 3, "FSTR", 0., posfp[1], 0., 0, "ONLY"); |
| 57df6e96 |
1127 | |
| 1128 | // GLASS Layer definition |
| 1129 | //parfp[0] = klstripx*0.5; |
| 1130 | parfp[1] = khglassy; |
| 1131 | parfp[2] = kwglfz*0.5; |
| 5e6c8f3d |
1132 | gMC->Gsvolu("FGLF", "BOX", idtmed[508], parfp, 3); // glass |
| 57df6e96 |
1133 | // positioning 2 GLASS Layers in FSTR volume |
| 1134 | //posfp[0] = 0.; |
| 1135 | posfp[1] = (khcpcby + khglfy)*0.5 + khrgly; |
| 1136 | //posfp[2] = 0.; |
| 5e6c8f3d |
1137 | gMC->Gspos("FGLF", 1, "FSTR", 0.,-posfp[1], 0., 0, "ONLY"); |
| 1138 | gMC->Gspos("FGLF", 2, "FSTR", 0., posfp[1], 0., 0, "ONLY"); |
| 57df6e96 |
1139 | |
| 1140 | // Positioning the Strips (FSTR volumes) in the FLT volumes |
| 1141 | Int_t maxStripNumbers [5] ={fTOFGeometry->NStripC(), |
| 1142 | fTOFGeometry->NStripB(), |
| 1143 | fTOFGeometry->NStripA(), |
| 1144 | fTOFGeometry->NStripB(), |
| 1145 | fTOFGeometry->NStripC()}; |
| 1146 | |
| a3b608e8 |
1147 | Int_t idrotm[91]; for (Int_t ii=0; ii<91; ii++) idrotm[ii]=0; |
| 57df6e96 |
1148 | |
| 1149 | Int_t totalStrip = 0; |
| 1150 | Float_t xpos, zpos, ypos, ang; |
| 1151 | for(Int_t iplate = 0; iplate < fTOFGeometry->NPlates(); iplate++){ |
| 1152 | if (iplate>0) totalStrip += maxStripNumbers[iplate-1]; |
| 1153 | for(Int_t istrip = 0; istrip < maxStripNumbers[iplate]; istrip++){ |
| 1154 | |
| 1155 | ang = fTOFGeometry->GetAngles(iplate,istrip); |
| 1156 | AliDebug(1, Form(" iplate = %1i, istrip = %2i ---> ang = %f", iplate, istrip, ang)); |
| 1157 | |
| 1158 | if (ang>0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.+ang,90., ang, 90.); |
| 1159 | else if (ang==0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.,90., 0., 0.); |
| 1160 | else if (ang<0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.+ang,90.,-ang,270.); |
| 1161 | |
| 1162 | xpos = 0.; |
| 1163 | ypos = fTOFGeometry->GetHeights(iplate,istrip) + yFLT*0.5; |
| 1164 | zpos = fTOFGeometry->GetDistances(iplate,istrip); |
| 5e6c8f3d |
1165 | gMC->Gspos("FSTR", istrip+totalStrip+1, "FLTA", xpos, ypos,-zpos, idrotm[istrip+totalStrip], "ONLY"); |
| 57df6e96 |
1166 | |
| 1167 | if (fTOFHoles) { |
| 1168 | if (istrip+totalStrip+1>53) |
| 5e6c8f3d |
1169 | gMC->Gspos("FSTR", istrip+totalStrip+1, "FLTC", xpos, ypos,-zpos-(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5, idrotm[istrip+totalStrip], "ONLY"); |
| 57df6e96 |
1170 | if (istrip+totalStrip+1<39) |
| 5e6c8f3d |
1171 | gMC->Gspos("FSTR", istrip+totalStrip+1, "FLTB", xpos, ypos,-zpos+(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5, idrotm[istrip+totalStrip], "ONLY"); |
| 57df6e96 |
1172 | } |
| 1173 | } |
| 1174 | } |
| 1175 | |
| 1176 | } |
| 1177 | |
| 1178 | //_____________________________________________________________________________ |
| 1179 | void AliTOFv6T0::CreateBackZone(Float_t xtof, Float_t ytof, Float_t zlenA) const |
| 1180 | { |
| 1181 | // |
| 1182 | // Define: |
| 1183 | // - containers for FEA cards, cooling system |
| 1184 | // signal cables and supermodule support structure |
| 5e6c8f3d |
1185 | // (volumes called FAIA/B/C), |
| 57df6e96 |
1186 | // - containers for FEA cards and some cooling |
| 1187 | // elements for a FEA (volumes called FCA1/2). |
| 1188 | // |
| 1189 | |
| 57df6e96 |
1190 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1191 | |
| a3b608e8 |
1192 | Int_t idrotm[1]={0}; |
| 57df6e96 |
1193 | |
| 5e6c8f3d |
1194 | // Definition of the air card containers (FAIA, FAIC and FAIB) |
| 57df6e96 |
1195 | |
| 1196 | Float_t par[3]; |
| 1197 | par[0] = xtof*0.5; |
| 1198 | par[1] = (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 1199 | par[2] = zlenA*0.5; |
| 1200 | gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air |
| 1201 | if (fTOFHoles) gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air |
| 5e6c8f3d |
1202 | gMC->Gsvolu("FAIC", "BOX ", idtmed[500], par, 3); // Air |
| 1203 | |
| 1204 | Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]}; |
| 1205 | Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]}; |
| 1206 | Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]}; |
| 1879b6a0 |
1207 | //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]}; |
| 57df6e96 |
1208 | |
| 1209 | // FEA card mother-volume definition |
| 5e6c8f3d |
1210 | Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness, |
| 1879b6a0 |
1211 | feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5, |
| 5e6c8f3d |
1212 | feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]}; |
| 57df6e96 |
1213 | gMC->Gsvolu("FCA1", "BOX ", idtmed[500], carpar, 3); // Air |
| 57df6e96 |
1214 | gMC->Gsvolu("FCA2", "BOX ", idtmed[500], carpar, 3); // Air |
| 1215 | |
| 1216 | // rotation matrix |
| 1217 | AliMatrix(idrotm[0], 90.,180., 90., 90.,180., 0.); |
| 1218 | |
| 1219 | // FEA card mother-volume positioning |
| 1220 | Float_t rowstep = 6.66; |
| 1221 | Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4}; |
| 1222 | Int_t rowb[5] = {6, 7, 6, 19, 7}; |
| 5e6c8f3d |
1223 | Float_t carpos[3] = {0., |
| 1224 | -(ytof*0.5 - fgkModuleCoverThickness)*0.5 + carpar[1], |
| 1225 | -0.8}; |
| 1226 | gMC->Gspos("FCA1", 91, "FAIA", carpos[0], carpos[1], carpos[2], 0, "MANY"); |
| 1227 | gMC->Gspos("FCA2", 91, "FAIC", carpos[0], carpos[1], carpos[2], 0, "MANY"); |
| 1228 | |
| 57df6e96 |
1229 | Int_t row = 1; |
| 1230 | Int_t nrow = 0; |
| 1231 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 5e6c8f3d |
1232 | carpos[2] = sg*zlenA*0.5 - 0.8; |
| 57df6e96 |
1233 | for (Int_t nb=0; nb<5; ++nb) { |
| 1234 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1235 | nrow = row + rowb[nb]; |
| 1236 | for ( ; row < nrow ; ++row) { |
| 1237 | |
| 1238 | carpos[2] -= sg*rowstep; |
| 1239 | |
| 1240 | if (nb==4) { |
| 5e6c8f3d |
1241 | gMC->Gspos("FCA1", row, "FAIA", carpos[0], carpos[1], carpos[2], 0, "ONLY"); |
| 1242 | gMC->Gspos("FCA2", row, "FAIC", carpos[0], carpos[1], carpos[2], 0, "ONLY"); |
| 57df6e96 |
1243 | |
| 1244 | } |
| 1245 | else { |
| 1246 | switch (sg) { |
| 1247 | case 1: |
| 5e6c8f3d |
1248 | gMC->Gspos("FCA1", row, "FAIA", carpos[0], carpos[1], carpos[2], 0, "ONLY"); |
| 1249 | gMC->Gspos("FCA2", row, "FAIC", carpos[0], carpos[1], carpos[2], 0, "ONLY"); |
| 57df6e96 |
1250 | break; |
| 1251 | case -1: |
| 5e6c8f3d |
1252 | gMC->Gspos("FCA1", row, "FAIA", carpos[0], carpos[1], carpos[2], idrotm[0], "ONLY"); |
| 1253 | gMC->Gspos("FCA2", row, "FAIC", carpos[0], carpos[1], carpos[2], idrotm[0], "ONLY"); |
| 57df6e96 |
1254 | break; |
| 1255 | } |
| 1256 | |
| 1257 | } |
| 5e6c8f3d |
1258 | |
| 57df6e96 |
1259 | } |
| 1260 | } |
| 1261 | } |
| 1262 | |
| 57df6e96 |
1263 | if (fTOFHoles) { |
| 1264 | row = 1; |
| 1265 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 5e6c8f3d |
1266 | carpos[2] = sg*zlenA*0.5 - 0.8; |
| 57df6e96 |
1267 | for (Int_t nb=0; nb<4; ++nb) { |
| 1268 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1269 | nrow = row + rowb[nb]; |
| 1270 | for ( ; row < nrow ; ++row) { |
| 1271 | carpos[2] -= sg*rowstep; |
| 1272 | |
| 1273 | switch (sg) { |
| 1274 | case 1: |
| 5e6c8f3d |
1275 | gMC->Gspos("FCA1", row, "FAIB", carpos[0], carpos[1], carpos[2], 0, "ONLY"); |
| 57df6e96 |
1276 | break; |
| 1277 | case -1: |
| 5e6c8f3d |
1278 | gMC->Gspos("FCA1", row, "FAIB", carpos[0], carpos[1], carpos[2], idrotm[0], "ONLY"); |
| 57df6e96 |
1279 | break; |
| 1280 | } |
| 1281 | } |
| 1282 | } |
| 1283 | } |
| 1284 | } |
| 1285 | |
| 1286 | } |
| 1287 | |
| 1288 | //_____________________________________________________________________________ |
| 5e6c8f3d |
1289 | void AliTOFv6T0::MakeFrontEndElectronics(Float_t xtof) const |
| 57df6e96 |
1290 | { |
| 1291 | // |
| 1292 | // Fill FCA1/2 volumes with FEA cards (FFEA volumes). |
| 1293 | // |
| 1294 | |
| 1295 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1296 | |
| 57df6e96 |
1297 | // FEA card volume definition |
| 5e6c8f3d |
1298 | Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]}; |
| 1299 | gMC->Gsvolu("FFEA", "BOX ", idtmed[502], feaParam, 3); // G10 |
| 1300 | |
| 1301 | Float_t al1[3] = {fgkAl1parameters[0], fgkAl1parameters[1], fgkAl1parameters[2]}; |
| 1302 | Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]}; |
| 1303 | Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]}; |
| 1879b6a0 |
1304 | //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]}; |
| 5e6c8f3d |
1305 | |
| 1306 | Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness, |
| 1879b6a0 |
1307 | feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5, |
| 5e6c8f3d |
1308 | feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]}; |
| 57df6e96 |
1309 | |
| 1310 | // FEA card volume positioning |
| 5e6c8f3d |
1311 | Float_t xCoor = xtof*0.5 - 25.; |
| 1312 | Float_t yCoor =-carpar[1] + feaParam[1]; |
| 1313 | Float_t zCoor =-carpar[2] + (2.*feaRoof1[2] - 2.*al1[2] - feaParam[2]); |
| 1314 | gMC->Gspos("FFEA", 1, "FCA1",-xCoor, yCoor, zCoor, 0, "ONLY"); |
| 1315 | gMC->Gspos("FFEA", 4, "FCA1", xCoor, yCoor, zCoor, 0, "ONLY"); |
| 1316 | gMC->Gspos("FFEA", 1, "FCA2",-xCoor, yCoor, zCoor, 0, "ONLY"); |
| 1317 | gMC->Gspos("FFEA", 4, "FCA2", xCoor, yCoor, zCoor, 0, "ONLY"); |
| 1318 | xCoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1319 | gMC->Gspos("FFEA", 2, "FCA1",-xCoor, yCoor, zCoor, 0, "ONLY"); |
| 1320 | gMC->Gspos("FFEA", 3, "FCA1", xCoor, yCoor, zCoor, 0, "ONLY"); |
| 1321 | gMC->Gspos("FFEA", 2, "FCA2",-xCoor, yCoor, zCoor, 0, "ONLY"); |
| 1322 | gMC->Gspos("FFEA", 3, "FCA2", xCoor, yCoor, zCoor, 0, "ONLY"); |
| 57df6e96 |
1323 | |
| 1324 | } |
| 1325 | |
| 1326 | //_____________________________________________________________________________ |
| 5e6c8f3d |
1327 | void AliTOFv6T0::MakeFEACooling(Float_t xtof) const |
| 57df6e96 |
1328 | { |
| 1329 | // |
| 1330 | // Make cooling system attached to each FEA card |
| 1331 | // (FAL1, FRO1 and FBAR/1/2 volumes) |
| 5e6c8f3d |
1332 | // in FCA1/2 volume containers. |
| 57df6e96 |
1333 | // |
| 1334 | |
| 57df6e96 |
1335 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1336 | |
| 57df6e96 |
1337 | // first FEA cooling element definition |
| 5e6c8f3d |
1338 | Float_t al1[3] = {fgkAl1parameters[0], fgkAl1parameters[1], fgkAl1parameters[2]}; |
| 57df6e96 |
1339 | gMC->Gsvolu("FAL1", "BOX ", idtmed[504], al1, 3); // Al |
| 57df6e96 |
1340 | |
| 5e6c8f3d |
1341 | // second FEA cooling element definition |
| 1342 | Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]}; |
| 1343 | gMC->Gsvolu("FRO1", "BOX ", idtmed[504], feaRoof1, 3); // Al |
| 57df6e96 |
1344 | |
| 5e6c8f3d |
1345 | Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]}; |
| 1879b6a0 |
1346 | //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]}; |
| 57df6e96 |
1347 | |
| 5e6c8f3d |
1348 | // definition and positioning of a small air groove in the FRO1 volume |
| 1879b6a0 |
1349 | Float_t airHole[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1]*0.5, feaRoof1[2]}; |
| 5e6c8f3d |
1350 | gMC->Gsvolu("FREE", "BOX ", idtmed[500], airHole, 3); // Air |
| 1351 | gMC->Gspos("FREE", 1, "FRO1", 0., feaRoof1[1]-airHole[1], 0., 0, "ONLY"); |
| 1352 | gGeoManager->GetVolume("FRO1")->VisibleDaughters(kFALSE); |
| 57df6e96 |
1353 | |
| 5e6c8f3d |
1354 | // third FEA cooling element definition |
| 1355 | Float_t bar[3] = {fgkBar[0], fgkBar[1], fgkBar[2]}; |
| 1356 | gMC->Gsvolu("FBAR", "BOX ", idtmed[504], bar, 3); // Al |
| 57df6e96 |
1357 | |
| 5e6c8f3d |
1358 | Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]}; |
| 57df6e96 |
1359 | |
| 5e6c8f3d |
1360 | Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness, |
| 1879b6a0 |
1361 | feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5, |
| 5e6c8f3d |
1362 | feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]}; |
| 57df6e96 |
1363 | |
| 5e6c8f3d |
1364 | // fourth FEA cooling element definition |
| 1365 | Float_t bar1[3] = {fgkBar1[0], fgkBar1[1], fgkBar1[2]}; |
| 1366 | gMC->Gsvolu("FBA1", "BOX ", idtmed[504], bar1, 3); // Al |
| 57df6e96 |
1367 | |
| 5e6c8f3d |
1368 | // fifth FEA cooling element definition |
| 1369 | Float_t bar2[3] = {fgkBar2[0], fgkBar2[1], fgkBar2[2]}; |
| 1370 | gMC->Gsvolu("FBA2", "BOX ", idtmed[504], bar2, 3); // Al |
| 9f8488c2 |
1371 | |
| 5e6c8f3d |
1372 | // first FEA cooling element positioning |
| 1373 | Float_t xcoor = xtof*0.5 - 25.; |
| 1879b6a0 |
1374 | Float_t ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - al1[1]; |
| 5e6c8f3d |
1375 | Float_t zcoor =-carpar[2] + 2.*feaRoof1[2] - al1[2]; |
| 1376 | gMC->Gspos("FAL1", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1377 | gMC->Gspos("FAL1", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1378 | gMC->Gspos("FAL1", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1379 | gMC->Gspos("FAL1", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1380 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1381 | gMC->Gspos("FAL1", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1382 | gMC->Gspos("FAL1", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1383 | gMC->Gspos("FAL1", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1384 | gMC->Gspos("FAL1", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1385 | |
| 1386 | // second FEA cooling element positioning |
| 1387 | xcoor = xtof*0.5 - 25.; |
| 1879b6a0 |
1388 | ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - feaRoof1[1]; |
| 5e6c8f3d |
1389 | zcoor =-carpar[2] + feaRoof1[2]; |
| 1879b6a0 |
1390 | gMC->Gspos("FRO1", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "MANY"); // (AdC) |
| 1391 | gMC->Gspos("FRO1", 4, "FCA1", xcoor, ycoor, zcoor, 0, "MANY"); // (AdC) |
| 5e6c8f3d |
1392 | gMC->Gspos("FRO1", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1393 | gMC->Gspos("FRO1", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1394 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1879b6a0 |
1395 | gMC->Gspos("FRO1", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "MANY"); // (AdC) |
| 1396 | gMC->Gspos("FRO1", 3, "FCA1", xcoor, ycoor, zcoor, 0, "MANY"); // (AdC) |
| 5e6c8f3d |
1397 | gMC->Gspos("FRO1", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1398 | gMC->Gspos("FRO1", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1399 | |
| 1400 | // third FEA cooling element positioning |
| 1401 | xcoor = xtof*0.5 - 25.; |
| 1879b6a0 |
1402 | ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - bar[1]; |
| 5e6c8f3d |
1403 | zcoor =-carpar[2] + bar[2]; |
| 1404 | gMC->Gspos("FBAR", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1405 | gMC->Gspos("FBAR", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1406 | gMC->Gspos("FBAR", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1407 | gMC->Gspos("FBAR", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1408 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1409 | gMC->Gspos("FBAR", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1410 | gMC->Gspos("FBAR", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1411 | gMC->Gspos("FBAR", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1412 | gMC->Gspos("FBAR", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1413 | |
| 1414 | // fourth FEA cooling element positioning |
| 1415 | Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw}; |
| 1416 | xcoor = xtof*0.5 - 25.; |
| 1879b6a0 |
1417 | ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - bar[1]; |
| 5e6c8f3d |
1418 | zcoor =-carpar[2] + 2.*bar[2] + 2.*tubepar[1] + bar1[2]; |
| 1419 | gMC->Gspos("FBA1", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1420 | gMC->Gspos("FBA1", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1421 | gMC->Gspos("FBA1", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1422 | gMC->Gspos("FBA1", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1423 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1424 | gMC->Gspos("FBA1", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1425 | gMC->Gspos("FBA1", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1426 | gMC->Gspos("FBA1", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1427 | gMC->Gspos("FBA1", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1428 | |
| 1429 | // fifth FEA cooling element positioning |
| 1430 | xcoor = xtof*0.5 - 25.; |
| 1879b6a0 |
1431 | ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - bar2[1]; |
| 5e6c8f3d |
1432 | zcoor =-carpar[2] + 2.*bar[2] + bar2[2]; |
| 1433 | gMC->Gspos("FBA2", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1434 | gMC->Gspos("FBA2", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1435 | gMC->Gspos("FBA2", 1, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1436 | gMC->Gspos("FBA2", 4, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1437 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1438 | gMC->Gspos("FBA2", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1439 | gMC->Gspos("FBA2", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1440 | gMC->Gspos("FBA2", 2, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1441 | gMC->Gspos("FBA2", 3, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1442 | |
| 1443 | xcoor = xtof*0.5 - 25.; |
| 1879b6a0 |
1444 | ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*bar2[1] - 2.*tubepar[1] - bar2[1]; |
| 5e6c8f3d |
1445 | zcoor =-carpar[2] + 2.*bar[2] + bar2[2]; |
| 1446 | gMC->Gspos("FBA2", 5, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1447 | gMC->Gspos("FBA2", 8, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1448 | gMC->Gspos("FBA2", 5, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1449 | gMC->Gspos("FBA2", 8, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1450 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1451 | gMC->Gspos("FBA2", 6, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1452 | gMC->Gspos("FBA2", 7, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1453 | gMC->Gspos("FBA2", 6, "FCA2",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1454 | gMC->Gspos("FBA2", 7, "FCA2", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 9f8488c2 |
1455 | |
| 57df6e96 |
1456 | } |
| 9f8488c2 |
1457 | |
| 57df6e96 |
1458 | //_____________________________________________________________________________ |
| 5e6c8f3d |
1459 | void AliTOFv6T0::MakeNinoMask(Float_t xtof) const |
| 57df6e96 |
1460 | { |
| 1461 | // |
| 1462 | // Make cooling Nino mask |
| 5e6c8f3d |
1463 | // for each FEA card (FAL2/3 and FRO2 volumes) |
| 1464 | // in FCA1 volume container. |
| 57df6e96 |
1465 | // |
| 1466 | |
| 57df6e96 |
1467 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1468 | |
| 57df6e96 |
1469 | // first Nino ASIC mask volume definition |
| 5e6c8f3d |
1470 | Float_t al2[3] = {fgkAl2parameters[0], fgkAl2parameters[1], fgkAl2parameters[2]}; |
| 57df6e96 |
1471 | gMC->Gsvolu("FAL2", "BOX ", idtmed[504], al2, 3); // Al |
| 1472 | |
| 1473 | // second Nino ASIC mask volume definition |
| 5e6c8f3d |
1474 | Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]}; |
| 57df6e96 |
1475 | gMC->Gsvolu("FAL3", "BOX ", idtmed[504], al3, 3); // Al |
| 1476 | |
| 57df6e96 |
1477 | // third Nino ASIC mask volume definition |
| 5e6c8f3d |
1478 | Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]}; |
| 57df6e96 |
1479 | gMC->Gsvolu("FRO2", "BOX ", idtmed[504], feaRoof2, 3); // Al |
| dfef1a15 |
1480 | |
| 5e6c8f3d |
1481 | Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]}; |
| 1482 | Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]}; |
| 9f8488c2 |
1483 | |
| 5e6c8f3d |
1484 | Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness, |
| 1879b6a0 |
1485 | feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5, |
| 5e6c8f3d |
1486 | feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]}; |
| 9f8488c2 |
1487 | |
| 5e6c8f3d |
1488 | // first Nino ASIC mask volume positioning |
| 1489 | Float_t xcoor = xtof*0.5 - 25.; |
| 1490 | Float_t ycoor = carpar[1] - 2.*al3[1]; |
| 1491 | Float_t zcoor = carpar[2] - 2.*al3[2] - al2[2]; |
| 1492 | gMC->Gspos("FAL2", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1493 | gMC->Gspos("FAL2", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1494 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1495 | gMC->Gspos("FAL2", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1496 | gMC->Gspos("FAL2", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 9f8488c2 |
1497 | |
| 5e6c8f3d |
1498 | // second Nino ASIC mask volume positioning |
| 1499 | xcoor = xtof*0.5 - 25.; |
| 1500 | ycoor = carpar[1] - al3[1]; |
| 1501 | zcoor = carpar[2] - al3[2]; |
| 1502 | gMC->Gspos("FAL3", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1503 | gMC->Gspos("FAL3", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1504 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1505 | gMC->Gspos("FAL3", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1506 | gMC->Gspos("FAL3", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1507 | |
| 1508 | // third Nino ASIC mask volume positioning |
| 1509 | xcoor = xtof*0.5 - 25.; |
| 1879b6a0 |
1510 | ycoor = carpar[1] - fgkRoof2parameters[1]; |
| 1511 | zcoor = carpar[2] - 2.*al3[2] - fgkRoof2parameters[2]; |
| 5e6c8f3d |
1512 | gMC->Gspos("FRO2", 1, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1513 | gMC->Gspos("FRO2", 4, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1514 | xcoor = feaParam[0] + (fgkFEAwidth2*0.5 - fgkFEAwidth1); |
| 1515 | gMC->Gspos("FRO2", 2, "FCA1",-xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1516 | gMC->Gspos("FRO2", 3, "FCA1", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 57df6e96 |
1517 | |
| 1518 | } |
| 1519 | |
| 1520 | //_____________________________________________________________________________ |
| 1521 | void AliTOFv6T0::MakeSuperModuleCooling(Float_t xtof, Float_t ytof, Float_t zlenA) const |
| 1522 | { |
| 1523 | // |
| 1524 | // Make cooling tubes (FTUB volume) |
| 5e6c8f3d |
1525 | // and cooling bars (FTLN and FLO1/2/3 volumes) |
| 1526 | // in FAIA/B/C volume containers. |
| 57df6e96 |
1527 | // |
| 1528 | |
| 57df6e96 |
1529 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1530 | |
| a3b608e8 |
1531 | Int_t idrotm[1]={0}; |
| 57df6e96 |
1532 | |
| 57df6e96 |
1533 | // cooling tube volume definition |
| 1534 | Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw - fgkSawThickness}; |
| 1535 | gMC->Gsvolu("FTUB", "TUBE", idtmed[512], tubepar, 3); // Cu |
| 1536 | |
| 1537 | // water cooling tube volume definition |
| 1538 | Float_t tubeparW[3] = {0., 0.3, tubepar[2]}; |
| 1539 | gMC->Gsvolu("FITU", "TUBE", idtmed[509], tubeparW, 3); // H2O |
| 1540 | |
| 1541 | // Positioning of the water tube into the steel one |
| 5e6c8f3d |
1542 | gMC->Gspos("FITU", 1, "FTUB", 0., 0., 0., 0, "ONLY"); |
| 57df6e96 |
1543 | |
| 1544 | // definition of transverse components of SM cooling system |
| 5e6c8f3d |
1545 | Float_t trapar[3] = {tubepar[2], 6.175/*6.15*/, 0.7}; |
| 1546 | gMC->Gsvolu("FTLN", "BOX ", idtmed[504], trapar, 3); // Al |
| 57df6e96 |
1547 | |
| 1548 | // rotation matrix |
| 1549 | AliMatrix(idrotm[0], 180., 90., 90., 90., 90., 0.); |
| 1550 | |
| 5e6c8f3d |
1551 | Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]}; |
| 1552 | Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]}; |
| 1553 | Float_t bar[3] = {fgkBar[0], fgkBar[1], fgkBar[2]}; |
| 1554 | Float_t bar2[3] = {fgkBar2[0], fgkBar2[1], fgkBar2[2]}; |
| 1555 | Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]}; |
| 1879b6a0 |
1556 | //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]}; |
| 57df6e96 |
1557 | |
| 5e6c8f3d |
1558 | Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness, |
| 1879b6a0 |
1559 | feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5, |
| 5e6c8f3d |
1560 | feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]}; |
| 57df6e96 |
1561 | |
| 5e6c8f3d |
1562 | Float_t ytub =-(ytof*0.5 - fgkModuleCoverThickness)*0.5 + carpar[1] + |
| 1879b6a0 |
1563 | carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*bar2[1] - tubepar[1]; |
| 57df6e96 |
1564 | |
| 5e6c8f3d |
1565 | // Positioning of tubes for the SM cooling system |
| 1879b6a0 |
1566 | Float_t ycoor = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*bar2[1] - tubepar[1]; |
| 5e6c8f3d |
1567 | Float_t zcoor =-carpar[2] + 2.*bar[2] + tubepar[1]; |
| 1568 | gMC->Gspos("FTUB", 1, "FCA1", 0., ycoor, zcoor, idrotm[0], "ONLY"); |
| 1569 | gMC->Gspos("FTUB", 1, "FCA2", 0., ycoor, zcoor, idrotm[0], "ONLY"); |
| 1570 | gGeoManager->GetVolume("FTUB")->VisibleDaughters(kFALSE); |
| 1571 | |
| 1572 | Float_t yFLTN = trapar[1] - (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 1573 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1574 | // Positioning of transverse components for the SM cooling system |
| 1575 | gMC->Gspos("FTLN", 5+4*sg, "FAIA", 0., yFLTN, 369.9*sg, 0, "MANY"); |
| 1576 | gMC->Gspos("FTLN", 5+3*sg, "FAIA", 0., yFLTN, 366.9*sg, 0, "MANY"); |
| 1577 | gMC->Gspos("FTLN", 5+2*sg, "FAIA", 0., yFLTN, 198.8*sg, 0, "MANY"); |
| 1578 | gMC->Gspos("FTLN", 5+sg, "FAIA", 0., yFLTN, 56.82*sg, 0, "MANY"); |
| 1579 | gMC->Gspos("FTLN", 5+4*sg, "FAIC", 0., yFLTN, 369.9*sg, 0, "MANY"); |
| 1580 | gMC->Gspos("FTLN", 5+3*sg, "FAIC", 0., yFLTN, 366.9*sg, 0, "MANY"); |
| 1581 | gMC->Gspos("FTLN", 5+2*sg, "FAIC", 0., yFLTN, 198.8*sg, 0, "MANY"); |
| 1582 | gMC->Gspos("FTLN", 5+sg, "FAIC", 0., yFLTN, 56.82*sg, 0, "MANY"); |
| 1583 | } |
| 57df6e96 |
1584 | |
| 5e6c8f3d |
1585 | // definition of longitudinal components of SM cooling system |
| 1586 | Float_t lonpar1[3] = {2., 0.5, 56.82 - trapar[2]}; |
| 1587 | Float_t lonpar2[3] = {lonpar1[0], lonpar1[1], (198.8 - 56.82)*0.5 - trapar[2]}; |
| 1588 | Float_t lonpar3[3] = {lonpar1[0], lonpar1[1], (366.9 - 198.8)*0.5 - trapar[2]}; |
| 1589 | gMC->Gsvolu("FLO1", "BOX ", idtmed[504], lonpar1, 3); // Al |
| 1590 | gMC->Gsvolu("FLO2", "BOX ", idtmed[504], lonpar2, 3); // Al |
| 1591 | gMC->Gsvolu("FLO3", "BOX ", idtmed[504], lonpar3, 3); // Al |
| 1592 | |
| 1593 | // Positioning of longitudinal components for the SM cooling system |
| 1594 | ycoor = ytub + (tubepar[1] + 2.*bar2[1] + lonpar1[1]); |
| 1595 | gMC->Gspos("FLO1", 4, "FAIA",-24., ycoor, 0., 0, "MANY"); |
| 1596 | gMC->Gspos("FLO1", 2, "FAIA", 24., ycoor, 0., 0, "MANY"); |
| 1597 | gMC->Gspos("FLO1", 4, "FAIC",-24., ycoor, 0., 0, "MANY"); |
| 1598 | gMC->Gspos("FLO1", 2, "FAIC", 24., ycoor, 0., 0, "MANY"); |
| 1599 | |
| 1600 | zcoor = (198.8 + 56.82)*0.5; |
| 1601 | gMC->Gspos("FLO2", 4, "FAIA",-24., ycoor,-zcoor, 0, "MANY"); |
| 1602 | gMC->Gspos("FLO2", 2, "FAIA", 24., ycoor,-zcoor, 0, "MANY"); |
| 1603 | gMC->Gspos("FLO2", 4, "FAIC",-24., ycoor,-zcoor, 0, "MANY"); |
| 1604 | gMC->Gspos("FLO2", 2, "FAIC", 24., ycoor,-zcoor, 0, "MANY"); |
| 1605 | gMC->Gspos("FLO2", 8, "FAIA",-24., ycoor, zcoor, 0, "MANY"); |
| 1606 | gMC->Gspos("FLO2", 6, "FAIA", 24., ycoor, zcoor, 0, "MANY"); |
| 1607 | gMC->Gspos("FLO2", 8, "FAIC",-24., ycoor, zcoor, 0, "MANY"); |
| 1608 | gMC->Gspos("FLO2", 6, "FAIC", 24., ycoor, zcoor, 0, "MANY"); |
| 1609 | |
| 1610 | zcoor = (366.9 + 198.8)*0.5; |
| 1611 | gMC->Gspos("FLO3", 4, "FAIA",-24., ycoor,-zcoor, 0, "MANY"); |
| 1612 | gMC->Gspos("FLO3", 2, "FAIA", 24., ycoor,-zcoor, 0, "MANY"); |
| 1613 | gMC->Gspos("FLO3", 4, "FAIC",-24., ycoor,-zcoor, 0, "MANY"); |
| 1614 | gMC->Gspos("FLO3", 2, "FAIC", 24., ycoor,-zcoor, 0, "MANY"); |
| 1615 | gMC->Gspos("FLO3", 8, "FAIA",-24., ycoor, zcoor, 0, "MANY"); |
| 1616 | gMC->Gspos("FLO3", 6, "FAIA", 24., ycoor, zcoor, 0, "MANY"); |
| 1617 | gMC->Gspos("FLO3", 8, "FAIC",-24., ycoor, zcoor, 0, "MANY"); |
| 1618 | gMC->Gspos("FLO3", 6, "FAIC", 24., ycoor, zcoor, 0, "MANY"); |
| 1619 | |
| 1620 | ycoor = ytub - (tubepar[1] + 2.*bar2[1] + lonpar1[1]); |
| 1621 | gMC->Gspos("FLO1", 3, "FAIA",-24., ycoor, 0., 0, "MANY"); |
| 1622 | gMC->Gspos("FLO1", 1, "FAIA", 24., ycoor, 0., 0, "MANY"); |
| 1623 | gMC->Gspos("FLO1", 3, "FAIC",-24., ycoor, 0., 0, "MANY"); |
| 1624 | gMC->Gspos("FLO1", 1, "FAIC", 24., ycoor, 0., 0, "MANY"); |
| 1625 | |
| 1626 | zcoor = (198.8 + 56.82)*0.5; |
| 1627 | gMC->Gspos("FLO2", 3, "FAIA",-24., ycoor,-zcoor, 0, "MANY"); |
| 1628 | gMC->Gspos("FLO2", 1, "FAIA", 24., ycoor,-zcoor, 0, "MANY"); |
| 1629 | gMC->Gspos("FLO2", 3, "FAIC",-24., ycoor,-zcoor, 0, "MANY"); |
| 1630 | gMC->Gspos("FLO2", 1, "FAIC", 24., ycoor,-zcoor, 0, "MANY"); |
| 1631 | gMC->Gspos("FLO2", 7, "FAIA",-24., ycoor, zcoor, 0, "MANY"); |
| 1632 | gMC->Gspos("FLO2", 5, "FAIA", 24., ycoor, zcoor, 0, "MANY"); |
| 1633 | gMC->Gspos("FLO2", 7, "FAIC",-24., ycoor, zcoor, 0, "MANY"); |
| 1634 | gMC->Gspos("FLO2", 5, "FAIC", 24., ycoor, zcoor, 0, "MANY"); |
| 1635 | |
| 1636 | zcoor = (366.9 + 198.8)*0.5; |
| 1637 | gMC->Gspos("FLO3", 3, "FAIA",-24., ycoor,-zcoor, 0, "MANY"); |
| 1638 | gMC->Gspos("FLO3", 1, "FAIA", 24., ycoor,-zcoor, 0, "MANY"); |
| 1639 | gMC->Gspos("FLO3", 3, "FAIC",-24., ycoor,-zcoor, 0, "MANY"); |
| 1640 | gMC->Gspos("FLO3", 1, "FAIC", 24., ycoor,-zcoor, 0, "MANY"); |
| 1641 | gMC->Gspos("FLO3", 7, "FAIA",-24., ycoor, zcoor, 0, "MANY"); |
| 1642 | gMC->Gspos("FLO3", 5, "FAIA", 24., ycoor, zcoor, 0, "MANY"); |
| 1643 | gMC->Gspos("FLO3", 7, "FAIC",-24., ycoor, zcoor, 0, "MANY"); |
| 1644 | gMC->Gspos("FLO3", 5, "FAIC", 24., ycoor, zcoor, 0, "MANY"); |
| 9f8488c2 |
1645 | |
| 57df6e96 |
1646 | |
| 5e6c8f3d |
1647 | Float_t carpos[3] = {25. - xtof*0.5, |
| 1648 | (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5, |
| 1649 | 0.}; |
| 57df6e96 |
1650 | if (fTOFHoles) { |
| 57df6e96 |
1651 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1652 | carpos[2] = sg*zlenA*0.5; |
| 5e6c8f3d |
1653 | gMC->Gspos("FTLN", 5+4*sg, "FAIB", 0., yFLTN, 369.9*sg, 0, "MANY"); |
| 1654 | gMC->Gspos("FTLN", 5+3*sg, "FAIB", 0., yFLTN, 366.9*sg, 0, "MANY"); |
| 1655 | gMC->Gspos("FTLN", 5+2*sg, "FAIB", 0., yFLTN, 198.8*sg, 0, "MANY"); |
| 1656 | gMC->Gspos("FTLN", 5+sg, "FAIB", 0., yFLTN, 56.82*sg, 0, "MANY"); |
| dfef1a15 |
1657 | } |
| 57df6e96 |
1658 | |
| 5e6c8f3d |
1659 | ycoor = ytub + (tubepar[1] + 2.*bar2[1] + lonpar1[1]); |
| e86c4f42 |
1660 | zcoor = (198.8 + 56.82)*0.5; |
| 5e6c8f3d |
1661 | gMC->Gspos("FLO2", 2, "FAIB",-24., ycoor,-zcoor, 0, "MANY"); |
| 1662 | gMC->Gspos("FLO2", 1, "FAIB",-24., ycoor, zcoor, 0, "MANY"); |
| e86c4f42 |
1663 | zcoor = (366.9 + 198.8)*0.5; |
| 5e6c8f3d |
1664 | gMC->Gspos("FLO3", 2, "FAIB",-24., ycoor,-zcoor, 0, "MANY"); |
| 1665 | gMC->Gspos("FLO3", 1, "FAIB",-24., ycoor, zcoor, 0, "MANY"); |
| 1666 | ycoor = ytub - (tubepar[1] + 2.*bar2[1] + lonpar1[1]); |
| e86c4f42 |
1667 | zcoor = (198.8 + 56.82)*0.5; |
| 1668 | gMC->Gspos("FLO2", 4, "FAIB", 24., ycoor,-zcoor, 0, "MANY"); |
| 1669 | gMC->Gspos("FLO2", 3, "FAIB", 24., ycoor, zcoor, 0, "MANY"); |
| 1670 | zcoor = (366.9 + 198.8)*0.5; |
| 1671 | gMC->Gspos("FLO3", 4, "FAIB", 24., ycoor,-zcoor, 0, "MANY"); |
| 1672 | gMC->Gspos("FLO3", 3, "FAIB", 24., ycoor, zcoor, 0, "MANY"); |
| 57df6e96 |
1673 | |
| 1674 | } |
| 1675 | |
| 5e6c8f3d |
1676 | Float_t barS[3] = {fgkBarS[0], fgkBarS[1], fgkBarS[2]}; |
| 1677 | gMC->Gsvolu("FBAS", "BOX ", idtmed[504], barS, 3); // Al |
| 1678 | |
| 1679 | Float_t barS1[3] = {fgkBarS1[0], fgkBarS1[1], fgkBarS1[2]}; |
| 1680 | gMC->Gsvolu("FBS1", "BOX ", idtmed[504], barS1, 3); // Al |
| 1681 | |
| 1682 | Float_t barS2[3] = {fgkBarS2[0], fgkBarS2[1], fgkBarS2[2]}; |
| 1683 | gMC->Gsvolu("FBS2", "BOX ", idtmed[504], barS2, 3); // Al |
| 1684 | |
| 1879b6a0 |
1685 | Float_t ytubBis = carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*barS2[1] - tubepar[1]; |
| 5e6c8f3d |
1686 | ycoor = ytubBis; |
| 1687 | zcoor =-carpar[2] + barS[2]; |
| 1688 | gMC->Gspos("FBAS", 1, "FCA1",-24., ycoor, zcoor, 0, "ONLY"); |
| 1689 | gMC->Gspos("FBAS", 2, "FCA1", 24., ycoor, zcoor, 0, "ONLY"); |
| 1690 | gMC->Gspos("FBAS", 1, "FCA2",-24., ycoor, zcoor, 0, "ONLY"); |
| 1691 | gMC->Gspos("FBAS", 2, "FCA2", 24., ycoor, zcoor, 0, "ONLY"); |
| 1692 | |
| 1693 | zcoor =-carpar[2] + 2.*barS[2] + 2.*tubepar[1] + barS1[2]; |
| 1694 | gMC->Gspos("FBS1", 1, "FCA1",-24., ycoor, zcoor, 0, "ONLY"); |
| 1695 | gMC->Gspos("FBS1", 2, "FCA1", 24., ycoor, zcoor, 0, "ONLY"); |
| 1696 | gMC->Gspos("FBS1", 1, "FCA2",-24., ycoor, zcoor, 0, "ONLY"); |
| 1697 | gMC->Gspos("FBS1", 2, "FCA2", 24., ycoor, zcoor, 0, "ONLY"); |
| 1698 | |
| 1699 | ycoor = ytubBis + (tubepar[1] + barS2[1]); |
| 1700 | zcoor =-carpar[2] + 2.*barS[2] + barS2[2]; |
| 1701 | gMC->Gspos("FBS2", 1, "FCA1",-24., ycoor, zcoor, 0, "ONLY"); |
| 1702 | gMC->Gspos("FBS2", 2, "FCA1", 24., ycoor, zcoor, 0, "ONLY"); |
| 1703 | gMC->Gspos("FBS2", 1, "FCA2",-24., ycoor, zcoor, 0, "ONLY"); |
| 1704 | gMC->Gspos("FBS2", 2, "FCA2", 24., ycoor, zcoor, 0, "ONLY"); |
| 1705 | |
| 1706 | ycoor = ytubBis - (tubepar[1] + barS2[1]); |
| 1707 | //zcoor =-carpar[2] + 2.*barS[2] + barS2[2]; |
| 1708 | gMC->Gspos("FBS2", 3, "FCA1",-24., ycoor, zcoor, 0, "ONLY"); |
| 1709 | gMC->Gspos("FBS2", 4, "FCA1", 24., ycoor, zcoor, 0, "ONLY"); |
| 1710 | gMC->Gspos("FBS2", 3, "FCA2",-24., ycoor, zcoor, 0, "ONLY"); |
| 1711 | gMC->Gspos("FBS2", 4, "FCA2", 24., ycoor, zcoor, 0, "ONLY"); |
| 1712 | |
| 57df6e96 |
1713 | } |
| 1714 | |
| 1715 | //_____________________________________________________________________________ |
| 1716 | void AliTOFv6T0::MakeSuperModuleServices(Float_t xtof, Float_t ytof, Float_t zlenA) const |
| 1717 | { |
| 1718 | // |
| 5e6c8f3d |
1719 | // Make signal cables (FCAB/L and FCBL/B volumes), |
| 57df6e96 |
1720 | // supemodule cover (FCOV volume) and wall (FSAW volume) |
| 5e6c8f3d |
1721 | // in FAIA/B/C volume containers. |
| 57df6e96 |
1722 | // |
| 1723 | |
| 57df6e96 |
1724 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1725 | |
| a3b608e8 |
1726 | Int_t idrotm[3]={0,0,0}; |
| 57df6e96 |
1727 | |
| 57df6e96 |
1728 | Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw - fgkSawThickness}; |
| 5e6c8f3d |
1729 | Float_t al1[3] = {fgkAl1parameters[0], fgkAl1parameters[1], fgkAl1parameters[2]}; |
| 1730 | Float_t al3[3] = {fgkAl3parameters[0], fgkAl3parameters[1], fgkAl3parameters[2]}; |
| 1731 | Float_t feaRoof1[3] = {fgkRoof1parameters[0], fgkRoof1parameters[1], fgkRoof1parameters[2]}; |
| 1879b6a0 |
1732 | //Float_t feaRoof2[3] = {fgkRoof2parameters[0], fgkRoof2parameters[1], fgkRoof2parameters[2]}; |
| 5e6c8f3d |
1733 | Float_t feaParam[3] = {fgkFEAparameters[0], fgkFEAparameters[1], fgkFEAparameters[2]}; |
| 57df6e96 |
1734 | |
| 1735 | // FEA cables definition |
| 5e6c8f3d |
1736 | Float_t cbpar[3] = {0., 0.5, (tubepar[2] - (fgkFEAwidth2 - fgkFEAwidth1/6.)*0.5)*0.5}; |
| 57df6e96 |
1737 | gMC->Gsvolu("FCAB", "TUBE", idtmed[510], cbpar, 3); // copper+alu |
| 5e6c8f3d |
1738 | |
| 1739 | Float_t cbparS[3] = {cbpar[0], cbpar[1], (tubepar[2] - (xtof*0.5 - 25. + (fgkFEAwidth1 - fgkFEAwidth1/6.)*0.5))*0.5}; |
| 1740 | gMC->Gsvolu("FCAL", "TUBE", idtmed[510], cbparS, 3); // copper+alu |
| 57df6e96 |
1741 | |
| 1742 | // rotation matrix |
| 1743 | AliMatrix(idrotm[0], 180., 90., 90., 90., 90., 0.); |
| 1744 | |
| 5e6c8f3d |
1745 | Float_t carpar[3] = {xtof*0.5 - fgkCBLw - fgkSawThickness, |
| 1879b6a0 |
1746 | feaParam[1] + feaRoof1[1] + fgkRoof2parameters[1]*0.5, |
| 5e6c8f3d |
1747 | feaRoof1[2] + fgkBetweenLandMask*0.5 + al3[2]}; |
| 57df6e96 |
1748 | |
| 5e6c8f3d |
1749 | Float_t bar2[3] = {fgkBar2[0], fgkBar2[1], fgkBar2[2]}; |
| 1750 | Float_t ytub =-(ytof*0.5 - fgkModuleCoverThickness)*0.5 + carpar[1] + |
| 1879b6a0 |
1751 | carpar[1] - 2.*fgkRoof2parameters[1]*0.5 - 2.*feaRoof1[1] - 2.*bar2[1] - tubepar[1]; |
| 57df6e96 |
1752 | |
| 5e6c8f3d |
1753 | // FEA cables positioning |
| 1754 | Float_t xcoor = (tubepar[2] + (fgkFEAwidth2 - fgkFEAwidth1/6.)*0.5)*0.5; |
| 1755 | Float_t ycoor = ytub - 3.; |
| 1756 | Float_t zcoor =-carpar[2] + (2.*feaRoof1[2] - 2.*al1[2] - 2.*feaParam[2] - cbpar[1]); |
| 1757 | gMC->Gspos("FCAB", 1, "FCA1",-xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1758 | gMC->Gspos("FCAB", 2, "FCA1", xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1759 | gMC->Gspos("FCAB", 1, "FCA2",-xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1760 | gMC->Gspos("FCAB", 2, "FCA2", xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1761 | xcoor = (tubepar[2] + (xtof*0.5 - 25. + (fgkFEAwidth1 - fgkFEAwidth1/6.)*0.5))*0.5; |
| 1762 | ycoor -= 2.*cbpar[1]; |
| 1763 | gMC->Gspos("FCAL", 1, "FCA1",-xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1764 | gMC->Gspos("FCAL", 2, "FCA1", xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1765 | gMC->Gspos("FCAL", 1, "FCA2",-xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1766 | gMC->Gspos("FCAL", 2, "FCA2", xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 57df6e96 |
1767 | |
| dfef1a15 |
1768 | |
| 1769 | // Cables and tubes on the side blocks |
| 57df6e96 |
1770 | // constants definition |
| 1771 | const Float_t kCBLl = zlenA*0.5; // length of block |
| 1772 | const Float_t kCBLlh = zlenA*0.5 - fgkInterCentrModBorder2; // length of block in case of holes |
| 1773 | //const Float_t fgkCBLw = 13.5; // width of block |
| 1774 | //const Float_t fgkCBLh1 = 2.; // min. height of block |
| 1775 | //const Float_t fgkCBLh2 = 12.3; // max. height of block |
| 1776 | //const Float_t fgkSawThickness = 1.; // Al wall thickness |
| 1777 | |
| 1778 | // lateral cable and tube volume definition |
| 1779 | Float_t tgal = (fgkCBLh2 - fgkCBLh1)/(2.*kCBLl); |
| dfef1a15 |
1780 | Float_t cblpar[11]; |
| 57df6e96 |
1781 | cblpar[0] = fgkCBLw *0.5; |
| dfef1a15 |
1782 | cblpar[1] = 0.; |
| 1783 | cblpar[2] = 0.; |
| 57df6e96 |
1784 | cblpar[3] = kCBLl *0.5; |
| 1785 | cblpar[4] = fgkCBLh1 *0.5; |
| 1786 | cblpar[5] = fgkCBLh2 *0.5; |
| dfef1a15 |
1787 | cblpar[6] = TMath::ATan(tgal)*kRaddeg; |
| 57df6e96 |
1788 | cblpar[7] = kCBLl *0.5; |
| 1789 | cblpar[8] = fgkCBLh1 *0.5; |
| 1790 | cblpar[9] = fgkCBLh2 *0.5; |
| dfef1a15 |
1791 | cblpar[10]= cblpar[6]; |
| 57df6e96 |
1792 | gMC->Gsvolu("FCBL", "TRAP", idtmed[511], cblpar, 11); // cables and tubes mix |
| 1793 | |
| 1794 | // Side Al Walls definition |
| 1795 | Float_t sawpar[3] = {fgkSawThickness*0.5, fgkCBLh2*0.5, kCBLl}; |
| 1796 | gMC->Gsvolu("FSAW", "BOX ", idtmed[504], sawpar, 3); // Al |
| 1797 | |
| 1798 | AliMatrix(idrotm[1], 90., 90., 180., 0., 90., 180.); |
| 1799 | AliMatrix(idrotm[2], 90., 90., 0., 0., 90., 0.); |
| 1800 | |
| 1801 | // lateral cable and tube volume positioning |
| 57df6e96 |
1802 | xcoor = (xtof - fgkCBLw)*0.5 - 2.*sawpar[0]; |
| 1803 | ycoor = (fgkCBLh1 + fgkCBLh2)*0.25 - (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 1804 | zcoor = kCBLl*0.5; |
| 1805 | gMC->Gspos("FCBL", 1, "FAIA", -xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 1806 | gMC->Gspos("FCBL", 2, "FAIA", xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 1807 | gMC->Gspos("FCBL", 3, "FAIA", -xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 1808 | gMC->Gspos("FCBL", 4, "FAIA", xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 5e6c8f3d |
1809 | gMC->Gspos("FCBL", 1, "FAIC", -xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 1810 | gMC->Gspos("FCBL", 2, "FAIC", xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 1811 | gMC->Gspos("FCBL", 3, "FAIC", -xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 1812 | gMC->Gspos("FCBL", 4, "FAIC", xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 57df6e96 |
1813 | |
| dfef1a15 |
1814 | if (fTOFHoles) { |
| 57df6e96 |
1815 | cblpar[3] = kCBLlh *0.5; |
| 1816 | cblpar[5] = fgkCBLh1*0.5 + kCBLlh*tgal; |
| 1817 | cblpar[7] = kCBLlh *0.5; |
| dfef1a15 |
1818 | cblpar[9] = cblpar[5]; |
| 57df6e96 |
1819 | gMC->Gsvolu("FCBB", "TRAP", idtmed[511], cblpar, 11); // cables and tubes mix |
| 1820 | |
| 1821 | xcoor = (xtof - fgkCBLw)*0.5 - 2.*sawpar[0]; |
| 1822 | ycoor = (fgkCBLh1 + 2.*cblpar[5])*0.25 - (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 1823 | zcoor = kCBLl-kCBLlh*0.5; |
| 1824 | gMC->Gspos("FCBB", 1, "FAIB", -xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 1825 | gMC->Gspos("FCBB", 2, "FAIB", xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 1826 | gMC->Gspos("FCBB", 3, "FAIB", -xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 1827 | gMC->Gspos("FCBB", 4, "FAIB", xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 1828 | } |
| 1829 | |
| 1830 | // lateral cable and tube volume positioning |
| 5e6c8f3d |
1831 | xcoor = xtof*0.5 - sawpar[0]; |
| 57df6e96 |
1832 | ycoor = (fgkCBLh2 - ytof*0.5 + fgkModuleCoverThickness)*0.5; |
| 1833 | zcoor = 0.; |
| 1834 | gMC->Gspos("FSAW", 1, "FAIA", -xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1835 | gMC->Gspos("FSAW", 2, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 5e6c8f3d |
1836 | gMC->Gspos("FSAW", 1, "FAIC", -xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1837 | gMC->Gspos("FSAW", 2, "FAIC", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 57df6e96 |
1838 | |
| 1839 | if (fTOFHoles) { |
| dfef1a15 |
1840 | xcoor = xtof*0.5 - sawpar[0]; |
| 57df6e96 |
1841 | ycoor = (fgkCBLh2 - ytof*0.5 + fgkModuleCoverThickness)*0.5; |
| dfef1a15 |
1842 | gMC->Gspos("FSAW", 1, "FAIB", -xcoor, ycoor, 0., 0, "ONLY"); |
| 1843 | gMC->Gspos("FSAW", 2, "FAIB", xcoor, ycoor, 0., 0, "ONLY"); |
| 1844 | } |
| 1845 | |
| 1846 | // TOF Supermodule cover definition and positioning |
| 57df6e96 |
1847 | Float_t covpar[3] = {xtof*0.5, 0.075, zlenA*0.5}; |
| 1848 | gMC->Gsvolu("FCOV", "BOX ", idtmed[504], covpar, 3); // Al |
| 1849 | if (fTOFHoles) { |
| 1850 | covpar[2] = (zlenA*0.5 - fgkInterCentrModBorder2)*0.5; |
| 1851 | gMC->Gsvolu("FCOB", "BOX ", idtmed[504], covpar, 3); // Al |
| 1852 | covpar[2] = fgkInterCentrModBorder2; |
| 1853 | gMC->Gsvolu("FCOP", "BOX ", idtmed[513], covpar, 3); // Plastic (CH2) |
| 1854 | } |
| 1855 | |
| dfef1a15 |
1856 | xcoor = 0.; |
| 5e6c8f3d |
1857 | ycoor = (ytof*0.5 - fgkModuleCoverThickness)*0.5 - covpar[1]; |
| dfef1a15 |
1858 | zcoor = 0.; |
| 1859 | gMC->Gspos("FCOV", 0, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 5e6c8f3d |
1860 | gMC->Gspos("FCOV", 0, "FAIC", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 57df6e96 |
1861 | if (fTOFHoles) { |
| 1862 | zcoor = (zlenA*0.5 + fgkInterCentrModBorder2)*0.5; |
| 1863 | gMC->Gspos("FCOB", 1, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1864 | gMC->Gspos("FCOB", 2, "FAIB", xcoor, ycoor, -zcoor, 0, "ONLY"); |
| 1865 | zcoor = 0.; |
| 1866 | gMC->Gspos("FCOP", 0, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 1867 | } |
| 1868 | |
| 1869 | } |
| 1870 | |
| 1871 | //_____________________________________________________________________________ |
| 1872 | void AliTOFv6T0::MakeReadoutCrates(Float_t ytof) const |
| 1873 | { |
| 1874 | // Services Volumes |
| 1875 | |
| 1876 | // Empty crate weight: 50 Kg, electronics cards + cables ~ 52 Kg. |
| 1877 | // Per each side (A and C) the total weight is: 2x102 ~ 204 Kg. |
| 1878 | // ... + weight of the connection pannel for the steel cooling system (Cr 18%, Ni 12%, Fe 70%) |
| 1879 | // + other remaining elements + various supports |
| 1880 | |
| 1881 | // Each FEA card weight + all supports |
| 1882 | // (including all bolts and not including the cable connectors) |
| 1883 | // 353.1 g. |
| 1884 | // Per each strip there are 4 FEA cards, then |
| 1885 | // the total weight of the front-end electonics section is: 353.1 g x 4 = 1412.4 g. |
| dfef1a15 |
1886 | |
| 1887 | // Services Volumes |
| 1888 | |
| 1889 | // Empty crate weight: 50 Kg, electronics cards + cables ~ 52 Kg. |
| 1890 | // Per each side (A and C) the total weight is: 2x102 ~ 204 Kg. |
| 1891 | // ... + weight of the connection pannel for the steel cooling system (Cr 18%, Ni 12%, Fe 70%) |
| 1892 | // + other remaining elements + various supports |
| 1893 | |
| 1894 | // Each FEA card weight + all supports |
| 1895 | // (including all bolts and not including the cable connectors) |
| 1896 | // 353.1 g. |
| 1897 | // Per each strip there are 4 FEA cards, then |
| 1898 | // the total weight of the front-end electonics section is: 353.1 g x 4 = 1412.4 g. |
| 57df6e96 |
1899 | // |
| 1900 | |
| 1901 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1902 | |
| a3b608e8 |
1903 | Int_t idrotm[18]; for (Int_t ii=0; ii<18; ii++) idrotm[ii]=0; |
| dfef1a15 |
1904 | |
| 57df6e96 |
1905 | // volume definition |
| dfef1a15 |
1906 | Float_t serpar[3] = {29.*0.5, 121.*0.5, 90.*0.5}; |
| 57df6e96 |
1907 | gMC->Gsvolu("FTOS", "BOX ", idtmed[514], serpar, 3); // Al + Cu + steel |
| 1908 | |
| 1909 | Float_t xcoor, ycoor, zcoor; |
| dfef1a15 |
1910 | zcoor = (118.-90.)*0.5; |
| 1911 | Float_t phi = -10., ra = fTOFGeometry->Rmin() + ytof*0.5; |
| 1912 | for (Int_t i = 0; i < fTOFGeometry->NSectors(); i++) { |
| 1913 | phi += 20.; |
| 1914 | xcoor = ra * TMath::Cos(phi * kDegrad); |
| 1915 | ycoor = ra * TMath::Sin(phi * kDegrad); |
| 57df6e96 |
1916 | AliMatrix(idrotm[i], 90., phi, 90., phi + 270., 0., 0.); |
| 1917 | gMC->Gspos("FTOS", i, "BFMO", xcoor, ycoor, zcoor, idrotm[i], "ONLY"); |
| dfef1a15 |
1918 | } |
| 57df6e96 |
1919 | |
| dfef1a15 |
1920 | zcoor = (90. - 223.)*0.5; |
| 2fb1ef22 |
1921 | gMC->Gspos("FTOS", 1, "BBCE", ra, -3., zcoor, 0, "ONLY"); |
| dfef1a15 |
1922 | |
| 1923 | } |
| 57df6e96 |
1924 | |
| dfef1a15 |
1925 | //_____________________________________________________________________________ |
| 1926 | void AliTOFv6T0::CreateMaterials() |
| 1927 | { |
| 1928 | // |
| 1929 | // Define materials for the Time Of Flight |
| 1930 | // |
| 1931 | |
| 1932 | //AliTOF::CreateMaterials(); |
| 1933 | |
| f7a1cc68 |
1934 | AliMagF *magneticField = (AliMagF*)((AliMagF*)TGeoGlobalMagField::Instance()->GetField()); |
| dfef1a15 |
1935 | |
| 1936 | Int_t isxfld = magneticField->Integ(); |
| 1937 | Float_t sxmgmx = magneticField->Max(); |
| 1938 | |
| 57df6e96 |
1939 | //--- Quartz (SiO2) --- |
| 1940 | Float_t aq[2] = { 28.0855,15.9994}; |
| dfef1a15 |
1941 | Float_t zq[2] = { 14.,8. }; |
| 1942 | Float_t wq[2] = { 1.,2. }; |
| 57df6e96 |
1943 | Float_t dq = 2.7; // (+5.9%) |
| dfef1a15 |
1944 | Int_t nq = -2; |
| 1945 | |
| 57df6e96 |
1946 | // --- Nomex (C14H22O2N2) --- |
| 1947 | Float_t anox[4] = {12.011,1.00794,15.9994,14.00674}; |
| dfef1a15 |
1948 | Float_t znox[4] = { 6., 1., 8., 7.}; |
| 1949 | Float_t wnox[4] = {14., 22., 2., 2.}; |
| 1950 | //Float_t dnox = 0.048; //old value |
| 1951 | Float_t dnox = 0.22; // (x 4.6) |
| 1952 | Int_t nnox = -4; |
| 1953 | |
| 57df6e96 |
1954 | // --- G10 {Si, O, C, H, O} --- |
| 1955 | Float_t we[7], na[7]; |
| 1956 | |
| 1957 | Float_t ag10[5] = {28.0855,15.9994,12.011,1.00794,15.9994}; |
| dfef1a15 |
1958 | Float_t zg10[5] = {14., 8., 6., 1., 8.}; |
| 1959 | Float_t wmatg10[5]; |
| 1960 | Int_t nlmatg10 = 5; |
| 1961 | na[0]= 1. , na[1]= 2. , na[2]= 0. , na[3]= 0. , na[4]= 0.; |
| 1962 | MaterialMixer(we,ag10,na,5); |
| 1963 | wmatg10[0]= we[0]*0.6; |
| 1964 | wmatg10[1]= we[1]*0.6; |
| 1965 | na[0]= 0. , na[1]= 0. , na[2]= 14. , na[3]= 20. , na[4]= 3.; |
| 1966 | MaterialMixer(we,ag10,na,5); |
| 1967 | wmatg10[2]= we[2]*0.4; |
| 1968 | wmatg10[3]= we[3]*0.4; |
| 1969 | wmatg10[4]= we[4]*0.4; |
| cb4d308f |
1970 | AliDebug(1,Form("wg10 %f %f %f %f %f", wmatg10[0], wmatg10[1], wmatg10[2], wmatg10[3], wmatg10[4])); |
| 57df6e96 |
1971 | //Float_t densg10 = 1.7; //old value |
| e41ca6a9 |
1972 | Float_t densg10 = 2.0; // (+17.8%) |
| dfef1a15 |
1973 | |
| 57df6e96 |
1974 | // --- Water --- |
| 1975 | Float_t awa[2] = { 1.00794, 15.9994 }; |
| dfef1a15 |
1976 | Float_t zwa[2] = { 1., 8. }; |
| 1977 | Float_t wwa[2] = { 2., 1. }; |
| 1978 | Float_t dwa = 1.0; |
| 1979 | Int_t nwa = -2; |
| 1980 | |
| 57df6e96 |
1981 | // --- Air --- |
| 1982 | Float_t aAir[4]={12.011,14.00674,15.9994,39.948}; |
| dfef1a15 |
1983 | Float_t zAir[4]={6.,7.,8.,18.}; |
| 1984 | Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827}; |
| 1985 | Float_t dAir = 1.20479E-3; |
| 1986 | |
| 57df6e96 |
1987 | // --- Fibre Glass --- |
| 1988 | Float_t afg[4] = {28.0855,15.9994,12.011,1.00794}; |
| dfef1a15 |
1989 | Float_t zfg[4] = {14., 8., 6., 1.}; |
| 1990 | Float_t wfg[4] = {0.12906,0.29405,0.51502,0.06187}; |
| 1991 | //Float_t dfg = 1.111; |
| 57df6e96 |
1992 | Float_t dfg = 2.05; // (x1.845) |
| dfef1a15 |
1993 | Int_t nfg = 4; |
| 1994 | |
| 57df6e96 |
1995 | // --- Freon C2F4H2 + SF6 --- |
| 1996 | Float_t afre[4] = {12.011,1.00794,18.9984032,32.0065}; |
| 1997 | Float_t zfre[4] = { 6., 1., 9., 16.}; |
| 1998 | Float_t wfre[4] = {0.21250,0.01787,0.74827,0.021355}; |
| 1999 | Float_t densfre = 0.00375; |
| dfef1a15 |
2000 | Int_t nfre = 4; |
| 2001 | |
| 57df6e96 |
2002 | // --- Cables and tubes {Al, Cu} --- |
| 2003 | Float_t acbt[2] = {26.981539,63.546}; |
| 2004 | Float_t zcbt[2] = {13., 29.}; |
| 2005 | Float_t wcbt[2] = {0.407,0.593}; |
| 2006 | Float_t decbt = 0.68; |
| 2007 | |
| 2008 | // --- Cable {CH2, Al, Cu} --- |
| 2009 | Float_t asc[4] = {12.011, 1.00794, 26.981539,63.546}; |
| 2010 | Float_t zsc[4] = { 6., 1., 13., 29.}; |
| 2011 | Float_t wsc[4]; |
| 2012 | for (Int_t ii=0; ii<4; ii++) wsc[ii]=0.; |
| 2013 | |
| 2014 | Float_t wDummy[4], nDummy[4]; |
| 2015 | for (Int_t ii=0; ii<4; ii++) wDummy[ii]=0.; |
| 2016 | for (Int_t ii=0; ii<4; ii++) nDummy[ii]=0.; |
| 2017 | nDummy[0] = 1.; |
| 2018 | nDummy[1] = 2.; |
| 2019 | MaterialMixer(wDummy,asc,nDummy,2); |
| 2020 | wsc[0] = 0.4375*wDummy[0]; |
| 2021 | wsc[1] = 0.4375*wDummy[1]; |
| 2022 | wsc[2] = 0.3244; |
| 2023 | wsc[3] = 0.2381; |
| 2024 | Float_t dsc = 1.223; |
| 2025 | |
| 2026 | // --- Crates boxes {Al, Cu, Fe, Cr, Ni} --- |
| 2027 | Float_t acra[5]= {26.981539,63.546,55.845,51.9961,58.6934}; |
| dfef1a15 |
2028 | Float_t zcra[5]= {13., 29., 26., 24., 28.}; |
| 2029 | Float_t wcra[5]= {0.7,0.2,0.07,0.018,0.012}; |
| 2030 | Float_t dcra = 0.77; |
| 2031 | |
| 57df6e96 |
2032 | // --- Polietilene CH2 --- |
| 2033 | Float_t aPlastic[2] = {12.011, 1.00794}; |
| 2034 | Float_t zPlastic[2] = { 6., 1.}; |
| 2035 | Float_t wPlastic[2] = { 1., 2.}; |
| 2036 | //Float_t dPlastic = 0.92; // PDB value |
| 2037 | Float_t dPlastic = 0.93; // (~+1.1%) |
| 2038 | Int_t nwPlastic = -2; |
| 2039 | |
| dfef1a15 |
2040 | AliMixture ( 0, "Air$", aAir, zAir, dAir, 4, wAir); |
| 2041 | AliMixture ( 1, "Nomex$", anox, znox, dnox, nnox, wnox); |
| 2042 | AliMixture ( 2, "G10$", ag10, zg10, densg10, nlmatg10, wmatg10); |
| 2043 | AliMixture ( 3, "fibre glass$", afg, zfg, dfg, nfg, wfg); |
| 57df6e96 |
2044 | AliMaterial( 4, "Al $", 26.981539, 13., 2.7, -8.9, 999.); |
| 2045 | Float_t factor = 0.4/1.5*2./3.; |
| 2046 | AliMaterial( 5, "Al honeycomb$", 26.981539, 13., 2.7*factor, -8.9/factor, 999.); |
| dfef1a15 |
2047 | AliMixture ( 6, "Freon$", afre, zfre, densfre, nfre, wfre); |
| 2048 | AliMixture ( 7, "Glass$", aq, zq, dq, nq, wq); |
| 57df6e96 |
2049 | AliMixture ( 8, "Water$", awa, zwa, dwa, nwa, wwa); |
| 2050 | AliMixture ( 9, "cables+tubes$", acbt, zcbt, decbt, 2, wcbt); |
| 2051 | AliMaterial(10, "Cu $", 63.546, 29., 8.96, -1.43, 999.); |
| 2052 | AliMixture (11, "cable$", asc, zsc, dsc, 4, wsc); |
| 2053 | AliMixture (12, "Al+Cu+steel$", acra, zcra, dcra, 5, wcra); |
| 2054 | AliMixture (13, "plastic$", aPlastic, zPlastic, dPlastic, nwPlastic, wPlastic); |
| 2055 | Float_t factorHoles = 1./36.5; |
| 2056 | AliMaterial(14, "Al honey for holes$", 26.981539, 13., 2.7*factorHoles, -8.9/factorHoles, 999.); |
| dfef1a15 |
2057 | |
| 2058 | Float_t epsil, stmin, deemax, stemax; |
| 2059 | |
| 2060 | // STD data |
| 2061 | // EPSIL = 0.1 ! Tracking precision, |
| 2062 | // STEMAX = 0.1 ! Maximum displacement for multiple scattering |
| 2063 | // DEEMAX = 0.1 ! Maximum fractional energy loss, DLS |
| 2064 | // STMIN = 0.1 |
| 2065 | |
| 2066 | // TOF data |
| 2067 | epsil = .001; // Tracking precision, |
| 2068 | stemax = -1.; // Maximum displacement for multiple scattering |
| 2069 | deemax = -.3; // Maximum fractional energy loss, DLS |
| 2070 | stmin = -.8; |
| 2071 | |
| 57df6e96 |
2072 | AliMedium( 1,"Air$", 0, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| dfef1a15 |
2073 | AliMedium( 2,"Nomex$", 1, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2074 | AliMedium( 3,"G10$", 2, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2075 | AliMedium( 4,"fibre glass$", 3, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 57df6e96 |
2076 | AliMedium( 5,"Al Frame$", 4, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2077 | AliMedium( 6,"honeycomb$", 5, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2078 | AliMedium( 7,"Fre$", 6, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2079 | AliMedium( 8,"Cu-S$", 10, 1, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2080 | AliMedium( 9,"Glass$", 7, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2081 | AliMedium(10,"Water$", 8, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2082 | AliMedium(11,"Cable$", 11, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2083 | AliMedium(12,"Cables+Tubes$", 9, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2084 | AliMedium(13,"Copper$", 10, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2085 | AliMedium(14,"Plastic$", 13, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2086 | AliMedium(15,"Crates$", 12, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2087 | AliMedium(16,"honey_holes$", 14, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| dfef1a15 |
2088 | |
| 2089 | } |
| 2090 | //_____________________________________________________________________________ |
| 2091 | void AliTOFv6T0::Init() |
| 2092 | { |
| 2093 | // |
| 2094 | // Initialise the detector after the geometry has been defined |
| 2095 | // |
| 2096 | AliDebug(1, "**************************************" |
| 2097 | " TOF " |
| 2098 | "**************************************"); |
| 2099 | AliDebug(1, " Version 4 of TOF initialing, " |
| 2100 | "symmetric TOF - Full Coverage version"); |
| 2101 | |
| 2102 | AliTOF::Init(); |
| 2103 | |
| 2104 | fIdFTOA = gMC->VolId("FTOA"); |
| 2105 | if (fTOFHoles) { |
| 2106 | fIdFTOB = gMC->VolId("FTOB"); |
| 2107 | fIdFTOC = gMC->VolId("FTOC"); |
| 2108 | } |
| 2109 | fIdFLTA = gMC->VolId("FLTA"); |
| 2110 | if (fTOFHoles) { |
| 2111 | fIdFLTB = gMC->VolId("FLTB"); |
| 2112 | fIdFLTC = gMC->VolId("FLTC"); |
| 2113 | } |
| 2114 | |
| 2115 | AliDebug(1, "**************************************" |
| 2116 | " TOF " |
| 2117 | "**************************************"); |
| 2118 | } |
| 2119 | |
| 2120 | //_____________________________________________________________________________ |
| 2121 | void AliTOFv6T0::StepManager() |
| 2122 | { |
| 2123 | |
| 2124 | // |
| 2125 | // Procedure called at each step in the Time Of Flight |
| 2126 | // |
| 2127 | |
| 2128 | TLorentzVector mom, pos; |
| 2129 | Float_t xm[3],pm[3],xpad[3],ppad[3]; |
| 2130 | Float_t hits[14]; |
| 2131 | Int_t vol[5]; |
| 2132 | Int_t sector, plate, padx, padz, strip; |
| 2133 | Int_t copy, padzid, padxid, stripid, i; |
| 2134 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 2135 | Float_t incidenceAngle; |
| 2136 | |
| 2137 | const char* volpath; |
| 2138 | |
| 2139 | Int_t index = 0; |
| 2140 | |
| 2141 | if( |
| 2142 | gMC->IsTrackEntering() |
| 2143 | && gMC->TrackCharge() |
| 57df6e96 |
2144 | //&& gMC->GetMedium()==idtmed[507] |
| 2145 | && gMC->CurrentMedium()==idtmed[507] |
| dfef1a15 |
2146 | && gMC->CurrentVolID(copy)==fIdSens |
| 2147 | ) |
| 2148 | { |
| 2149 | |
| 2150 | AliMC *mcApplication = (AliMC*)gAlice->GetMCApp(); |
| 2151 | |
| 66e8614d |
2152 | AddTrackReference(mcApplication->GetCurrentTrackNumber(), AliTrackReference::kTOF); |
| 2153 | //AddTrackReference(mcApplication->GetCurrentTrackNumber()); |
| dfef1a15 |
2154 | |
| 2155 | // getting information about hit volumes |
| 2156 | |
| 2157 | padzid=gMC->CurrentVolOffID(1,copy); |
| 2158 | padz=copy; |
| 2159 | padz--; |
| 2160 | |
| 2161 | padxid=gMC->CurrentVolOffID(0,copy); |
| 2162 | padx=copy; |
| 2163 | padx--; |
| 2164 | |
| 2165 | stripid=gMC->CurrentVolOffID(4,copy); |
| 2166 | strip=copy; |
| 2167 | strip--; |
| 2168 | |
| 2169 | gMC->TrackPosition(pos); |
| 2170 | gMC->TrackMomentum(mom); |
| 2171 | |
| 2172 | Double_t normMom=1./mom.Rho(); |
| 2173 | |
| 2174 | // getting the coordinates in pad ref system |
| 2175 | |
| 2176 | xm[0] = (Float_t)pos.X(); |
| 2177 | xm[1] = (Float_t)pos.Y(); |
| 2178 | xm[2] = (Float_t)pos.Z(); |
| 2179 | |
| 2180 | pm[0] = (Float_t)mom.X()*normMom; |
| 2181 | pm[1] = (Float_t)mom.Y()*normMom; |
| 2182 | pm[2] = (Float_t)mom.Z()*normMom; |
| 2183 | |
| 2184 | gMC->Gmtod(xm,xpad,1); // from MRS to DRS: coordinates convertion |
| 2185 | gMC->Gmtod(pm,ppad,2); // from MRS to DRS: direction cosinus convertion |
| 2186 | |
| 2187 | |
| 2188 | if (TMath::Abs(ppad[1])>1) { |
| 2189 | AliWarning("Abs(ppad) > 1"); |
| 2190 | ppad[1]=TMath::Sign((Float_t)1,ppad[1]); |
| 2191 | } |
| 2192 | incidenceAngle = TMath::ACos(ppad[1])*kRaddeg; |
| 2193 | |
| 2194 | plate = -1; |
| 2195 | if (strip < fTOFGeometry->NStripC()) { |
| 2196 | plate = 0; |
| 2197 | //strip = strip; |
| 2198 | } |
| 2199 | else if (strip >= fTOFGeometry->NStripC() && |
| 2200 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB()) { |
| 2201 | plate = 1; |
| 2202 | strip = strip - fTOFGeometry->NStripC(); |
| 2203 | } |
| 2204 | else if (strip >= fTOFGeometry->NStripC() + fTOFGeometry->NStripB() && |
| 2205 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA()) { |
| 2206 | plate = 2; |
| 2207 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB(); |
| 2208 | } |
| 2209 | else if (strip >= fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA() && |
| 2210 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA() + fTOFGeometry->NStripB()) { |
| 2211 | plate = 3; |
| 2212 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB() - fTOFGeometry->NStripA(); |
| 2213 | } |
| 2214 | else { |
| 2215 | plate = 4; |
| 2216 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB() - fTOFGeometry->NStripA() - fTOFGeometry->NStripB(); |
| 2217 | } |
| 2218 | |
| 2219 | volpath=gMC->CurrentVolOffName(7); |
| 2220 | index=atoi(&volpath[4]); |
| 2221 | sector=-1; |
| 2222 | sector=index; |
| 2223 | |
| 2224 | //Old 6h convention |
| 2225 | // if(index<5){ |
| 2226 | // sector=index+13; |
| 2227 | // } |
| 2228 | // else{ |
| 2229 | // sector=index-5; |
| 2230 | // } |
| 2231 | |
| 2232 | for(i=0;i<3;++i) { |
| 2233 | hits[i] = pos[i]; |
| 2234 | hits[i+3] = pm[i]; |
| 2235 | } |
| 2236 | |
| 2237 | hits[6] = mom.Rho(); |
| 2238 | hits[7] = pos[3]; |
| 2239 | hits[8] = xpad[0]; |
| 2240 | hits[9] = xpad[1]; |
| 2241 | hits[10]= xpad[2]; |
| 2242 | hits[11]= incidenceAngle; |
| 2243 | hits[12]= gMC->Edep(); |
| 2244 | hits[13]= gMC->TrackLength(); |
| 2245 | |
| 2246 | vol[0]= sector; |
| 2247 | vol[1]= plate; |
| 2248 | vol[2]= strip; |
| 2249 | vol[3]= padx; |
| 2250 | vol[4]= padz; |
| 2251 | |
| 2252 | AddT0Hit(mcApplication->GetCurrentTrackNumber(),vol, hits); |
| 2253 | //AddT0Hit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits); |
| 2254 | } |
| 2255 | } |
| 2256 | //------------------------------------------------------------------- |
| ca83c889 |
2257 | void AliTOFv6T0::MaterialMixer(Float_t * p, const Float_t * const a, |
| 2258 | const Float_t * const m, Int_t n) const |
| dfef1a15 |
2259 | { |
| 2260 | // a[] atomic weights vector (in) |
| 2261 | // (atoms present in more compound appear separately) |
| 2262 | // m[] number of corresponding atoms in the compound (in) |
| 2263 | Float_t t = 0.; |
| 2264 | for (Int_t i = 0; i < n; ++i) { |
| 2265 | p[i] = a[i]*m[i]; |
| 2266 | t += p[i]; |
| 2267 | } |
| 2268 | for (Int_t i = 0; i < n; ++i) { |
| 2269 | p[i] = p[i]/t; |
| 2270 | //AliDebug(1,Form((\n weight[%i] = %f (,i,p[i])); |
| 2271 | } |
| 2272 | } |
git://git.uio.no / u / mrichter / AliRoot.git / blame