Add trck reference for acceptance purpose (A.M.) + minors
[u/mrichter/AliRoot.git] / TOF / AliTOFv6T0.cxx
CommitLineData
dfef1a15 1/**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3 * *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
6 * *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
15
16/*
17$Log$
ba66add8 18Revision 1.7 2007/10/03 18:07:26 arcelli
19right handling of l2t matrices and alignable entries in case of TOF holes (Annalisa)
20
da79abb0 21Revision 1.6 2007/10/03 10:41:16 arcelli
22adding tracking-to-local matrices for new AliTOFcluster
23
ce352d73 24Revision 1.5 2007/07/27 08:14:48 morsch
25Write all track references into the same branch.
26
e6add757 27Revision 1.4 2007/05/29 16:51:05 decaro
28Update of the front-end electronics and cooling system description
29
9f8488c2 30Revision 1.3.2 2007/05/29 decaro
31FEA+cooling zone description: update
32 FEA+cooling orientation (side A/ side C) -> correction
33Revision 1.3.1 2007/05/24 decaro
34Change the FEA+cooling zone description:
35 - FCA1/FCA2, air boxes, contain:
36 FFEA volume, G10 box,
37 FAL1/FAL2/FAL3 volumes, aluminium boxes;
38 - FRO1/FRO2/FRO3/FRO4/FBAR, aluminum boxes;
39 - changed FTUB positions;
40
41Revision 1.3 2007/05/04 14:05:42 decaro
42Ineffective comment cleanup
43
e41ca6a9 44Revision 1.2 2007/05/04 12:59:22 arcelli
45Change the TOF SM paths for misalignment (one layer up)
46
6e2570fc 47Revision 1.1 2007/05/02 17:32:58 decaro
48TOF geometry description as installed (G. Cara Romeo, A. De Caro)
49
dfef1a15 50Revision 0.1 2007 March G. Cara Romeo and A. De Caro
51 Implemented a more realistic TOF geometry description,
52 in terms of:
53 - material badget,
54 - services and front end electronics description,
55 - TOF crate readout modules
56 (added volume FTOS in ALIC_1/BBMO_1/BBCE_%i -for i=1,...,18-,
57 and in ALIC_1/BFMO_%i -for i=19,...,36- volumes)
58 As the 5th version in terms of geometrical positioning of volumes.
59
60*/
61
62///////////////////////////////////////////////////////////////////////////////
63// //
64// This class contains the functions for version 6 of the Time Of Flight //
65// detector. //
66// //
67// VERSION WITH 6 MODULES AND TILTED STRIPS //
68// //
69// FULL COVERAGE VERSION + OPTION for PHOS holes //
70// //
71// //
72//Begin_Html //
73/* //
74<img src="picts/AliTOFv6T0Class.gif"> //
75*/ //
76//End_Html //
77// //
78///////////////////////////////////////////////////////////////////////////////
79
80#include "TBRIK.h"
81#include "TGeometry.h"
82#include "TLorentzVector.h"
83#include "TNode.h"
84#include "TVirtualMC.h"
85#include "TGeoManager.h"
ce352d73 86#include <TGeoMatrix.h>
87#include <TGeoPhysicalNode.h>
88#include <TGeoVolume.h>
dfef1a15 89
90#include "AliConst.h"
91#include "AliLog.h"
92#include "AliMagF.h"
93#include "AliMC.h"
94#include "AliRun.h"
e6add757 95#include "AliTrackReference.h"
dfef1a15 96
97#include "AliTOFGeometry.h"
dfef1a15 98#include "AliTOFv6T0.h"
99
100extern TDirectory *gDirectory;
101extern TVirtualMC *gMC;
102extern TGeoManager *gGeoManager;
103
104extern AliRun *gAlice;
105
106ClassImp(AliTOFv6T0)
107
108//_____________________________________________________________________________
109 AliTOFv6T0::AliTOFv6T0():
110 fIdFTOA(-1),
111 fIdFTOB(-1),
112 fIdFTOC(-1),
113 fIdFLTA(-1),
114 fIdFLTB(-1),
115 fIdFLTC(-1),
116 fTOFHoles(kFALSE)
117{
118 //
119 // Default constructor
120 //
121}
122
123//_____________________________________________________________________________
124AliTOFv6T0::AliTOFv6T0(const char *name, const char *title):
125 AliTOF(name,title,"tzero"),
126 fIdFTOA(-1),
127 fIdFTOB(-1),
128 fIdFTOC(-1),
129 fIdFLTA(-1),
130 fIdFLTB(-1),
131 fIdFLTC(-1),
132 fTOFHoles(kFALSE)
133{
134 //
135 // Standard constructor
136 //
137 //
138 // Check that FRAME is there otherwise we have no place where to
139 // put TOF
140
141
142 AliModule* frame = (AliModule*)gAlice->GetModule("FRAME");
143 if(!frame) {
144 AliFatal("TOF needs FRAME to be present");
145 } else{
146
147 if (fTOFGeometry) delete fTOFGeometry;
ba66add8 148 fTOFGeometry = new AliTOFGeometry();
dfef1a15 149
150 if(frame->IsVersion()==1) {
151 AliDebug(1,Form("Frame version %d", frame->IsVersion()));
152 AliDebug(1,"Full Coverage for TOF");
153 fTOFHoles=false;}
154 else {
155 AliDebug(1,Form("Frame version %d", frame->IsVersion()));
156 AliDebug(1,"TOF with Holes for PHOS");
157 fTOFHoles=true;}
158 }
159 fTOFGeometry->SetHoles(fTOFHoles);
160
161 //AliTOF::fTOFGeometry = fTOFGeometry;
162
163 // Save the geometry
164 TDirectory* saveDir = gDirectory;
165 gAlice->GetRunLoader()->CdGAFile();
166 fTOFGeometry->Write("TOFgeometry");
167 saveDir->cd();
168
169}
170
171//_____________________________________________________________________________
172void AliTOFv6T0::AddAlignableVolumes() const
173{
174 //
175 // Create entries for alignable volumes associating the symbolic volume
176 // name with the corresponding volume path. Needs to be syncronized with
177 // eventual changes in the geometry.
178 //
179
180 TString volPath;
181 TString symName;
182
183 TString vpL0 = "ALIC_1/B077_1/BSEGMO";
184 TString vpL1 = "_1/BTOF";
185 TString vpL2 = "_1";
186 TString vpL3 = "/FTOA_0";
187 TString vpL4 = "/FLTA_0/FSTR_";
188
189 TString snSM = "TOF/sm";
190 TString snSTRIP = "/strip";
191
192 Int_t nSectors=fTOFGeometry->NSectors();
193 Int_t nStrips =fTOFGeometry->NStripA()+
194 2*fTOFGeometry->NStripB()+
195 2*fTOFGeometry->NStripC();
196
197 //
198 // The TOF MRPC Strips
199 // The symbolic names are: TOF/sm00/strip01
200 // ...
201 // TOF/sm17/strip91
202
203 Int_t imod=0;
204
205 for (Int_t isect = 0; isect < nSectors; isect++) {
206 for (Int_t istr = 1; istr <= nStrips; istr++) {
da79abb0 207
208 if (fTOFHoles && (isect==11 || isect==12)) {
209 if (istr<39) {
210 vpL3 = "/FTOB_0";
211 vpL4 = "/FLTB_0/FSTR_";
212 }
213 else if (istr>53) {
214 vpL3 = "/FTOC_0";
215 vpL4 = "/FLTC_0/FSTR_";
216 }
217 else continue;
218 }
219 else {
220 vpL3 = "/FTOA_0";
221 vpL4 = "/FLTA_0/FSTR_";
222 }
223
dfef1a15 224 volPath = vpL0;
225 volPath += isect;
226 volPath += vpL1;
227 volPath += isect;
228 volPath += vpL2;
229 volPath += vpL3;
230 volPath += vpL4;
231 volPath += istr;
232
233
234 symName = snSM;
235 symName += Form("%02d",isect);
236 symName += snSTRIP;
237 symName += Form("%02d",istr);
238
239 AliDebug(2,"--------------------------------------------");
240 AliDebug(2,Form("Alignable object %d", imod));
241 AliDebug(2,Form("volPath=%s\n",volPath.Data()));
242 AliDebug(2,Form("symName=%s\n",symName.Data()));
243 AliDebug(2,"--------------------------------------------");
244
245 gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data());
ce352d73 246
247 //T2L matrices for alignment
248 TGeoPNEntry *e = gGeoManager->GetAlignableEntry(symName.Data());
249 if (e) {
250 const char *path = e->GetTitle();
251 if (!gGeoManager->cd(path)) {
252 AliFatal(Form("Volume path %s not valid!",path));
253 }
254 TGeoHMatrix *globMatrix = gGeoManager->GetCurrentMatrix();
255 Double_t phi = 20.0 * (isect % 18) + 10.0;
256 TGeoHMatrix *t2l = new TGeoHMatrix();
257 t2l->RotateZ(phi);
258 t2l->MultiplyLeft(&(globMatrix->Inverse()));
259 e->SetMatrix(t2l);
260 }
261 else {
262 AliError(Form("Alignable entry %s is not valid!",symName.Data()));
263 }
264
dfef1a15 265 imod++;
266 }
267 }
268
269
270 //
271 // The TOF supermodules
272 // The symbolic names are: TOF/sm00
273 // ...
274 // TOF/sm17
275 //
276 for (Int_t isect = 0; isect < nSectors; isect++) {
277
278 volPath = vpL0;
279 volPath += isect;
280 volPath += vpL1;
281 volPath += isect;
282 volPath += vpL2;
dfef1a15 283
284 symName = snSM;
285 symName += Form("%02d",isect);
286
287 AliDebug(2,"--------------------------------------------");
288 AliDebug(2,Form("Alignable object %d", isect+imod));
289 AliDebug(2,Form("volPath=%s\n",volPath.Data()));
290 AliDebug(2,Form("symName=%s\n",symName.Data()));
291 AliDebug(2,"--------------------------------------------");
292
293 gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data());
294
295 }
296
297}
298//____________________________________________________________________________
299void AliTOFv6T0::BuildGeometry()
300{
301 //
302 // Build TOF ROOT geometry for the ALICE event display
303 //
304 TNode *node, *top;
305 const int kColorTOF = 27;
306
307 TGeometry *globalGeometry = (TGeometry*)gAlice->GetGeometry();
308
309 // Find top TNODE
310 top = globalGeometry->GetNode("alice");
311
312 // Position the different copies
313 const Float_t krTof =(fTOFGeometry->Rmax()+fTOFGeometry->Rmin())/2.;
314 const Float_t khTof = fTOFGeometry->Rmax()-fTOFGeometry->Rmin();
315 const Int_t kNTof = fTOFGeometry->NSectors();
316 const Float_t kangle = k2PI/kNTof;
317
318 const Float_t kInterCentrModBorder1 = 49.5;
319 const Float_t kInterCentrModBorder2 = 57.5;
320
321 Float_t ang;
322
323 // define offset for nodes
324 Float_t zOffsetB = (fTOFGeometry->ZlenA()*0.5 + (kInterCentrModBorder1+kInterCentrModBorder2)*0.5)*0.5;
325 Float_t zOffsetA = 0.;
326 // Define TOF basic volume
327
328 char nodeName0[16], nodeName1[16], nodeName2[16];
329 char nodeName3[16], nodeName4[16], rotMatNum[16];
330
331 if (fTOFHoles) {
332 new TBRIK("S_TOF_B","TOF box","void",
333 fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenB()*0.5);
334 new TBRIK("S_TOF_C","TOF box","void",
335 fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenB()*0.5);
336 }
337 new TBRIK("S_TOF_A","TOF box","void",
338 fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenA()*0.5);
339
340 for (Int_t nodeNum=1;nodeNum<kNTof+1;nodeNum++){
341
342 if (nodeNum<10) {
343 sprintf(rotMatNum,"rot50%i",nodeNum);
344 sprintf(nodeName0,"FTO00%i",nodeNum);
345 sprintf(nodeName1,"FTO10%i",nodeNum);
346 sprintf(nodeName2,"FTO20%i",nodeNum);
347 sprintf(nodeName3,"FTO30%i",nodeNum);
348 sprintf(nodeName4,"FTO40%i",nodeNum);
349 }
350 if (nodeNum>9) {
351 sprintf(rotMatNum,"rot5%i",nodeNum);
352 sprintf(nodeName0,"FTO0%i",nodeNum);
353 sprintf(nodeName1,"FTO1%i",nodeNum);
354 sprintf(nodeName2,"FTO2%i",nodeNum);
355 sprintf(nodeName3,"FTO3%i",nodeNum);
356 sprintf(nodeName4,"FTO4%i",nodeNum);
357 }
358
359 new TRotMatrix(rotMatNum,rotMatNum,90,-20*nodeNum,90,90-20*nodeNum,0,0);
360 ang = (4.5-nodeNum) * kangle;
361
362 if (fTOFHoles) {
363 top->cd();
364 node = new TNode(nodeName2,nodeName2,"S_TOF_B", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang), zOffsetB,rotMatNum);
365 node->SetLineColor(kColorTOF);
366 fNodes->Add(node);
367
368 top->cd();
369 node = new TNode(nodeName3,nodeName3,"S_TOF_C", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang),-zOffsetB,rotMatNum);
370 node->SetLineColor(kColorTOF);
371 fNodes->Add(node);
372 }
373
374 top->cd();
375 node = new TNode(nodeName4,nodeName4,"S_TOF_A", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang), zOffsetA,rotMatNum);
376 node->SetLineColor(kColorTOF);
377 fNodes->Add(node);
378 } // end loop on nodeNum
379
380}
381
382//_____________________________________________________________________________
383void AliTOFv6T0::CreateGeometry()
384{
385 //
386 // Create geometry for Time Of Flight version 0
387 //
388 //Begin_Html
389 /*
390 <img src="picts/AliTOFv6T0.gif">
391 */
392 //End_Html
393 //
394 // Creates common geometry
395 //
396 AliTOF::CreateGeometry();
397}
398
399
400//_____________________________________________________________________________
401void AliTOFv6T0::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenA)
402{
403 //
404 // Definition of the Time Of Fligh Resistive Plate Chambers
405 //
406
407 const Float_t kPi = TMath::Pi();
408
409 const Float_t kInterCentrModBorder1 = 49.5;
410 const Float_t kInterCentrModBorder2 = 57.5;
411 const Float_t kExterInterModBorder1 = 196.0;
412 const Float_t kExterInterModBorder2 = 203.5;
413
414 const Float_t kLengthExInModBorder = 4.7;
415 const Float_t kLengthInCeModBorder = 7.0;
416
417 // module wall thickness (cm)
418 const Float_t kModuleWallThickness = 0.33;
419
420 // honeycomb layer between strips and cards (cm)
421 const Float_t kHoneycombLayerThickness = 2.;
422
423 AliDebug(1, "************************* TOF geometry **************************");
424 AliDebug(1,Form(" xtof %d", xtof));
425 AliDebug(1,Form(" ytof %d", ytof));
426 AliDebug(1,Form(" zlenA %d", zlenA));
427 AliDebug(2,Form(" zlenA*0.5 = %d", zlenA*0.5));
428
429 // Definition of the of fibre glass modules (FTOA, FTOB and FTOC)
6e2570fc 430
dfef1a15 431 Float_t xcoor, ycoor, zcoor;
432 Float_t par[3];
433 Int_t *idtmed = fIdtmed->GetArray()-499;
434 Int_t idrotm[100];
435
436 par[0] = xtof * 0.5;
437 par[1] = ytof * 0.25;
438 par[2] = zlenA * 0.5;
439 gMC->Gsvolu("FTOA", "BOX ", idtmed[503], par, 3); // fibre glass
6e2570fc 440
dfef1a15 441 if (fTOFHoles) {
442 par[0] = xtof * 0.5;
443 par[1] = ytof * 0.25;
444 par[2] = (zlenA*0.5 - kInterCentrModBorder1)*0.5;
445 gMC->Gsvolu("FTOB", "BOX ", idtmed[503], par, 3); // fibre glass
446 gMC->Gsvolu("FTOC", "BOX ", idtmed[503], par, 3); // fibre glass
447 }
448
449 // New supermodule card section description
450 // 2 cm honeycomb layer between strips and cards
451 par[0] = xtof*0.5 + 2.;
452 par[1] = kHoneycombLayerThickness*0.5;
453 par[2] = zlenA*0.5 + 2.;
454 gMC->Gsvolu("FPEA", "BOX ", idtmed[506], par, 3); // Al + Cu honeycomb
455 if (fTOFHoles) {
456 //par[0] = xtof*0.5 + 2.;
457 //par[1] = kHoneycombLayerThickness*0.5;
458 par[2] = (zlenA*0.5 - kInterCentrModBorder1)*0.5 + 2.;
459 gMC->Gsvolu("FPEB", "BOX ", idtmed[506], par, 3); // Al + Cu honeycomb
460 }
461
462 // Definition of the air card containers (FAIA and FAIB)
463
464 par[0] = xtof*0.5;
465 par[1] = (ytof*0.5 - kHoneycombLayerThickness)*0.5;
466 par[2] = zlenA*0.5;
467 gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air
468 if (fTOFHoles) gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air
469
470 // Positioning of fibre glass modules (FTOA, FTOB and FTOC) and
471 // card containers (FPEA, FAIA and FAIB)
472
473 //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.);
474 AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.);
dfef1a15 475 xcoor = 0.;
476 for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++){
477 if(fTOFSectors[isec]==-1)continue;
478 char name[16];
479 sprintf(name, "BTOF%d",isec);
480 if (fTOFHoles && (isec==11||isec==12)) {
481 //if (fTOFHoles && (isec==16||isec==17)) { \\Old 6h convention
482 //xcoor = 0.;
483 ycoor = (zlenA*0.5 + kInterCentrModBorder1)*0.5;
484 zcoor = -ytof * 0.25;
485 gMC->Gspos("FTOB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
486 gMC->Gspos("FTOC", 0, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY");
487 //xcoor = 0.;
488 //ycoor = (zlenA*0.5 + kInterCentrModBorder1)*0.5;
489 zcoor = kHoneycombLayerThickness*0.5;
490 gMC->Gspos("FPEB", 1, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
491 gMC->Gspos("FPEB", 2, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY");
492 //xcoor = 0.;
493 ycoor = 0.;
494 zcoor = kHoneycombLayerThickness + (ytof*0.5 - kHoneycombLayerThickness)*0.5;
495 gMC->Gspos("FAIB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
496 }
497 else {
498 //xcoor = 0.;
499 ycoor = 0.;
500 zcoor = -ytof * 0.25;
501 gMC->Gspos("FTOA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
502 //xcoor = 0.;
503 //ycoor = 0.;
504 zcoor = kHoneycombLayerThickness*0.5;
505 gMC->Gspos("FPEA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
506 //xcoor = 0.;
507 //ycoor = 0.;
508 zcoor = kHoneycombLayerThickness + (ytof*0.5 - kHoneycombLayerThickness)*0.5;
509 gMC->Gspos("FAIA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY");
510 }
511 }
512
513 // Definition and positioning
514 // of the not sensitive volumes with Insensitive Freon (FLTA, FLTB and FLTC)
515
516 Float_t xFLT, yFLT, zFLTA;
517
518 xFLT = xtof - kModuleWallThickness*2.;
519 yFLT = ytof*0.5 - kModuleWallThickness;
520 zFLTA = zlenA - kModuleWallThickness*2.;
521
522 par[0] = xFLT*0.5;
523 par[1] = yFLT*0.5;
524 par[2] = zFLTA*0.5;
525 gMC->Gsvolu("FLTA", "BOX ", idtmed[507], par, 3); // Freon mix
526
527 xcoor = 0.;
528 ycoor = kModuleWallThickness*0.5;
529 zcoor = 0.;
530 gMC->Gspos ("FLTA", 0, "FTOA", xcoor, ycoor, zcoor, 0, "ONLY");
531
532 if (fTOFHoles) {
533 par[2] = (zlenA*0.5 - kInterCentrModBorder1 - kModuleWallThickness)*0.5;
534 gMC->Gsvolu("FLTB", "BOX ", idtmed[507], par, 3); // Freon mix
535 gMC->Gsvolu("FLTC", "BOX ", idtmed[507], par, 3); // Freon mix
536
537 //xcoor = 0.;
538 //ycoor = kModuleWallThickness*0.5;
539 //zcoor = 0.;
540 gMC->Gspos ("FLTB", 0, "FTOB", xcoor, ycoor, zcoor, 0, "ONLY");
541 gMC->Gspos ("FLTC", 0, "FTOC", xcoor, ycoor, zcoor, 0, "ONLY");
542 }
543
544 Float_t alpha, tgal, beta, tgbe, trpa[11];
545
546 // Definition and positioning
547 // of the fibre glass walls between central and intermediate modules (FWZ1 and FWZ2)
548
549 tgal = (yFLT - 2.*kLengthInCeModBorder)/(kInterCentrModBorder2 - kInterCentrModBorder1);
550 alpha = TMath::ATan(tgal);
551 beta = (kPi*0.5 - alpha)*0.5;
552 tgbe = TMath::Tan(beta);
553 trpa[0] = xFLT*0.5;
554 trpa[1] = 0.;
555 trpa[2] = 0.;
556 trpa[3] = kModuleWallThickness;
557 trpa[4] = (kLengthInCeModBorder - kModuleWallThickness*tgbe)*0.5;
558 trpa[5] = (kLengthInCeModBorder + kModuleWallThickness*tgbe)*0.5;
559 trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
560 trpa[7] = kModuleWallThickness;
561 trpa[8] = (kLengthInCeModBorder - kModuleWallThickness*tgbe)*0.5;
562 trpa[9] = (kLengthInCeModBorder + kModuleWallThickness*tgbe)*0.5;
563 trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
564 gMC->Gsvolu("FWZ1","TRAP", idtmed[503], trpa, 11); // fibre glass
565
566 AliMatrix (idrotm[1],90., 90.,180.,0.,90.,180.);
567 AliMatrix (idrotm[4],90., 90., 0.,0.,90., 0.);
568
569 xcoor = 0.;
570 ycoor = -(yFLT - kLengthInCeModBorder)*0.5;
571 zcoor = kInterCentrModBorder1;
572 gMC->Gspos("FWZ1", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[1],"ONLY");
573 gMC->Gspos("FWZ1", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[4],"ONLY");
574
575 AliMatrix (idrotm[2],90.,270., 0.,0.,90.,180.);
576 AliMatrix (idrotm[5],90.,270.,180.,0.,90., 0.);
577
578 xcoor = 0.;
579 ycoor = (yFLT - kLengthInCeModBorder)*0.5;
580 zcoor = kInterCentrModBorder2;
581 gMC->Gspos("FWZ1", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[2],"ONLY");
582 gMC->Gspos("FWZ1", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[5],"ONLY");
583
584 trpa[0] = 0.5*(kInterCentrModBorder2 - kInterCentrModBorder1)/TMath::Cos(alpha);
585 trpa[1] = kModuleWallThickness;
586 trpa[2] = xFLT*0.5;
587 trpa[3] = -beta*kRaddeg;
588 trpa[4] = 0.;
589 trpa[5] = 0.;
590 gMC->Gsvolu("FWZ2","PARA", idtmed[503], trpa, 6); // fibre glass
591
592 AliMatrix (idrotm[3], alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.);
593 AliMatrix (idrotm[6],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90., 0.);
594
595 xcoor = 0.;
596 ycoor = 0.;
597 zcoor = (kInterCentrModBorder2 + kInterCentrModBorder1)*0.5;
598 gMC->Gspos("FWZ2", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[3],"ONLY");
599 gMC->Gspos("FWZ2", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[6],"ONLY");
600
601 // Definition and positioning
602 // of the fibre glass walls between intermediate and lateral modules (FWZ3 and FWZ4)
603
604 tgal = (yFLT - 2.*kLengthExInModBorder)/(kExterInterModBorder2 - kExterInterModBorder1);
605 alpha = TMath::ATan(tgal);
606 beta = (kPi*0.5 - alpha)*0.5;
607 tgbe = TMath::Tan(beta);
608 trpa[0] = xFLT*0.5;
609 trpa[1] = 0.;
610 trpa[2] = 0.;
611 trpa[3] = kModuleWallThickness;
612 trpa[4] = (kLengthExInModBorder - kModuleWallThickness*tgbe)*0.5;
613 trpa[5] = (kLengthExInModBorder + kModuleWallThickness*tgbe)*0.5;
614 trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
615 trpa[7] = kModuleWallThickness;
616 trpa[8] = (kLengthExInModBorder - kModuleWallThickness*tgbe)*0.5;
617 trpa[9] = (kLengthExInModBorder + kModuleWallThickness*tgbe)*0.5;
618 trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg;
619 gMC->Gsvolu("FWZ3","TRAP", idtmed[503], trpa, 11); // fibre glass
620
621 xcoor = 0.;
622 ycoor = (yFLT - kLengthExInModBorder)*0.5;
623 zcoor = kExterInterModBorder1;
624 gMC->Gspos("FWZ3", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[5],"ONLY");
625 gMC->Gspos("FWZ3", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[2],"ONLY");
626
627 if (fTOFHoles) {
628 //xcoor = 0.;
629 //ycoor = (yFLT - kLengthExInModBorder)*0.5;
630 zcoor = -kExterInterModBorder1 + (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5;
631 gMC->Gspos("FWZ3", 5,"FLTB", xcoor, ycoor, zcoor,idrotm[2],"ONLY");
632 gMC->Gspos("FWZ3", 6,"FLTC", xcoor, ycoor,-zcoor,idrotm[5],"ONLY");
633 }
634
635 //xcoor = 0.;
636 ycoor = -(yFLT - kLengthExInModBorder)*0.5;
637 zcoor = kExterInterModBorder2;
638 gMC->Gspos("FWZ3", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[4],"ONLY");
639 gMC->Gspos("FWZ3", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[1],"ONLY");
640
641 if (fTOFHoles) {
642 //xcoor = 0.;
643 //ycoor = -(yFLT - kLengthExInModBorder)*0.5;
644 zcoor = -kExterInterModBorder2 + (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5;
645 gMC->Gspos("FWZ3", 7,"FLTB", xcoor, ycoor, zcoor,idrotm[1],"ONLY");
646 gMC->Gspos("FWZ3", 8,"FLTC", xcoor, ycoor,-zcoor,idrotm[4],"ONLY");
647 }
648
649 trpa[0] = 0.5*(kExterInterModBorder2 - kExterInterModBorder1)/TMath::Cos(alpha);
650 trpa[1] = kModuleWallThickness;
651 trpa[2] = xFLT*0.5;
652 trpa[3] = -beta*kRaddeg;
653 trpa[4] = 0.;
654 trpa[5] = 0.;
655 gMC->Gsvolu("FWZ4","PARA", idtmed[503], trpa, 6); // fibre glass
656
657 AliMatrix (idrotm[13],alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.);
658 AliMatrix (idrotm[16],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90.,0.);
659
660 //xcoor = 0.;
661 ycoor = 0.;
662 zcoor = (kExterInterModBorder2 + kExterInterModBorder1)*0.5;
663 gMC->Gspos("FWZ4", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[16],"ONLY");
664 gMC->Gspos("FWZ4", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[13],"ONLY");
665
666 if (fTOFHoles) {
667 //xcoor = 0.;
668 //ycoor = 0.;
669 zcoor = -(kExterInterModBorder2 + kExterInterModBorder1)*0.5 +
670 (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5;
671 gMC->Gspos("FWZ4", 3,"FLTB", xcoor, ycoor, zcoor,idrotm[13],"ONLY");
672 gMC->Gspos("FWZ4", 4,"FLTC", xcoor, ycoor,-zcoor,idrotm[16],"ONLY");
673 }
674
675
676 ///////////////// Detector itself //////////////////////
677
678 const Int_t knx = fTOFGeometry->NpadX(); // number of pads along x
679 const Int_t knz = fTOFGeometry->NpadZ(); // number of pads along z
680 const Float_t kPadX = fTOFGeometry->XPad(); // pad length along x
681 const Float_t kPadZ = fTOFGeometry->ZPad(); // pad length along z
682
683 // new description for strip volume -double stack strip-
684 // -- all constants are expressed in cm
685 // heigth of different layers
686 const Float_t khhony = 1.0; // heigth of HONY Layer
687 const Float_t khpcby = 0.08; // heigth of PCB Layer
688 const Float_t khrgly = 0.055; // heigth of RED GLASS Layer
689
690 const Float_t khfiliy = 0.125; // heigth of FISHLINE Layer
691 const Float_t khglassy = 0.160*0.5; // heigth of GLASS Layer
692 const Float_t khglfy = khfiliy+2.*khglassy; // heigth of GLASS+FISHLINE Layer
693
694 const Float_t khcpcby = 0.16; // heigth of PCB Central Layer
695 const Float_t kwhonz = 8.1; // z dimension of HONEY Layer
696 const Float_t kwpcbz1 = 10.6; // z dimension of PCB Lower Layer
697 const Float_t kwpcbz2 = 11.6; // z dimension of PCB Upper Layer
698 const Float_t kwcpcbz = 13.; // z dimension of PCB Central Layer
699 const Float_t kwrglz = 8.; // z dimension of RED GLASS Layer
700 const Float_t kwglfz = 7.; // z dimension of GLASS+FISHLN Layer
701 const Float_t klsensmx = knx*kPadX; // length of Sensitive Layer
702 const Float_t khsensmy = 0.05; // heigth of Sensitive Layer
703 const Float_t kwsensmz = knz*kPadZ; // width of Sensitive Layer
704
705 // heigth of the FSTR Volume (the strip volume)
706 const Float_t khstripy = 2.*khhony+2.*khpcby+4.*khrgly+2.*khglfy+khcpcby;
707
708 // width of the FSTR Volume (the strip volume)
709 const Float_t kwstripz = kwcpcbz;
710 // length of the FSTR Volume (the strip volume)
711 const Float_t klstripx = fTOFGeometry->StripLength();
712
713 Float_t parfp[3]={klstripx*0.5, khstripy*0.5, kwstripz*0.5};
714 // Coordinates of the strip center in the strip reference frame;
715 // used for positioning internal strip volumes
716 Float_t posfp[3]={0.,0.,0.};
717
718 // FSTR volume definition-filling this volume with non sensitive Gas Mixture
719 gMC->Gsvolu("FSTR","BOX",idtmed[507],parfp,3); // Freon mix
720
721 //-- HONY Layer definition
722 //parfp[0] = klstripx*0.5;
723 parfp[1] = khhony*0.5;
724 parfp[2] = kwhonz*0.5;
725 gMC->Gsvolu("FHON","BOX",idtmed[501],parfp,3); // honeycomb (Nomex)
726 // positioning 2 HONY Layers on FSTR volume
727 //posfp[0] = 0.;
728 posfp[1] =-khstripy*0.5+parfp[1];
729 //posfp[2] = 0.;
730 gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY");
731 gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
732
733 //-- PCB Layer definition
734 //parfp[0] = klstripx*0.5;
735 parfp[1] = khpcby*0.5;
736 parfp[2] = kwpcbz1*0.5;
737 gMC->Gsvolu("FPC1","BOX",idtmed[502],parfp,3); // G10
738 //parfp[0] = klstripx*0.5;
739 //parfp[1] = khpcby*0.5;
740 parfp[2] = kwpcbz2*0.5;
741 gMC->Gsvolu("FPC2","BOX",idtmed[502],parfp,3); // G10
742 // positioning 2 PCB Layers on FSTR volume
743 //posfp[0] = 0.;
744 posfp[1] =-khstripy*0.5+khhony+parfp[1];
745 //posfp[2] = 0.;
746 gMC->Gspos("FPC1",1,"FSTR",0.,-posfp[1],0.,0,"ONLY");
747 gMC->Gspos("FPC2",1,"FSTR",0., posfp[1],0.,0,"ONLY");
748
749 //-- central PCB layer definition
750 //parfp[0] = klstripx*0.5;
751 parfp[1] = khcpcby*0.5;
752 parfp[2] = kwcpcbz*0.5;
753 gMC->Gsvolu("FPCB","BOX",idtmed[502],parfp,3); // G10
754 // positioning the central PCB layer
755 gMC->Gspos("FPCB",1,"FSTR",0.,0.,0.,0,"ONLY");
756
757 // Sensitive volume
758 Float_t parfs[3] = {klsensmx*0.5, khsensmy*0.5, kwsensmz*0.5};
759 gMC->Gsvolu("FSEN","BOX",idtmed[508],parfs,3); // sensitive
760 // dividing FSEN along z in knz=2 and along x in knx=48
761 gMC->Gsdvn("FSEZ","FSEN",knz,3);
762 gMC->Gsdvn("FPAD","FSEZ",knx,1);
763 // positioning a Sensitive layer inside FPCB
764 gMC->Gspos("FSEN",1,"FPCB",0.,0.,0.,0,"ONLY");
765
766 //-- RED GLASS Layer definition
767 //parfp[0] = klstripx*0.5;
768 parfp[1] = khrgly*0.5;
769 parfp[2] = kwrglz*0.5;
770 gMC->Gsvolu("FRGL","BOX",idtmed[509],parfp,3); // glass
771 // positioning 4 RED GLASS Layers on FSTR volume
772 //posfp[0] = 0.;
773 posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1];
774 //posfp[2] = 0.;
775 gMC->Gspos("FRGL",1,"FSTR",0., posfp[1],0.,0,"ONLY");
776 gMC->Gspos("FRGL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
777 //posfp[0] = 0.;
778 posfp[1] = (khcpcby+khrgly)*0.5;
779 //posfp[2] = 0.;
780 gMC->Gspos("FRGL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
781 gMC->Gspos("FRGL",3,"FSTR",0., posfp[1],0.,0,"ONLY");
782
783 //-- GLASS+FISHLINE Layer definition
784 //parfp[0] = klstripx*0.5;
785 parfp[1] = khglfy*0.5;
786 parfp[2] = kwglfz*0.5;
787 gMC->Gsvolu("FGLF","BOX",idtmed[504],parfp,3);
788
789 // positioning 2 GLASS+FISHLINE Layers on FSTR volume
790 //posfp[0] = 0.;
791 posfp[1] = (khcpcby + khglfy)*0.5 + khrgly;
792 //posfp[2] = 0.;
793 gMC->Gspos("FGLF",1,"FSTR",0.,-posfp[1],0.,0,"ONLY");
794 gMC->Gspos("FGLF",2,"FSTR",0., posfp[1],0.,0,"ONLY");
795
796 // Positioning the Strips (FSTR volumes) in the FLT volumes
797 Int_t maxStripNumbers [5] ={fTOFGeometry->NStripC(),
798 fTOFGeometry->NStripB(),
799 fTOFGeometry->NStripA(),
800 fTOFGeometry->NStripB(),
801 fTOFGeometry->NStripC()};
802
803 Int_t totalStrip = 0;
804 Float_t xpos, zpos, ypos, ang;
805 for(Int_t iplate = 0; iplate < fTOFGeometry->NPlates(); iplate++){
806 if (iplate>0) totalStrip += maxStripNumbers[iplate-1];
807 for(Int_t istrip = 0; istrip < maxStripNumbers[iplate]; istrip++){
808
809 ang = fTOFGeometry->GetAngles(iplate,istrip);
810 AliDebug(1, Form(" iplate = %1i, istrip = %2i ---> ang = %f", iplate, istrip, ang));
811
812 if (ang>0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.+ang,90., ang, 90.);
813 else if (ang==0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.,90., 0., 0.);
814 else if (ang<0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.+ang,90.,-ang,270.);
815
816 xpos = 0.;
817 zpos = fTOFGeometry->GetDistances(iplate,istrip);
818 ypos = fTOFGeometry->GetHeights(iplate,istrip) + yFLT*0.5;
819
820 gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTA", xpos, ypos,-zpos,idrotm[istrip+totalStrip+1], "ONLY");
821
822 if (fTOFHoles) {
823 if (istrip+totalStrip+1>53)
824 gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTC", xpos, ypos,-zpos-(zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5,idrotm[istrip+totalStrip+1],"ONLY");
825 if (istrip+totalStrip+1<39)
826 gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTB", xpos, ypos,-zpos+(zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5,idrotm[istrip+totalStrip+1],"ONLY");
827 }
828 }
829 }
830
831 // Definition of the cards, cooling tubes and layer for thermal dispersion
832 // (3 volumes)
833
834 // card volume definition
9f8488c2 835 //Float_t carpar[3] = {9.5, 5.75, 0.5};
836 Float_t carpar[3] = {9.5, 5.6, 0.55};
837 //gMC->Gsvolu("FCA1", "BOX ", idtmed[514], carpar, 3); // PCB+Alu small Card
838 gMC->Gsvolu("FCA1", "BOX ", idtmed[500], carpar, 3); // air
dfef1a15 839 carpar[0] = 19.25;
9f8488c2 840 //carpar[1] = 5.6;//5.75;
841 //carpar[2] = 0.55;//0.5;
842 //gMC->Gsvolu("FCA2", "BOX ", idtmed[514], carpar, 3); // PCB+Alu long Card
843 gMC->Gsvolu("FCA2", "BOX ", idtmed[500], carpar, 3); // air
844
845
846 Float_t feaParam1[3] = {9.5, 5.6, 0.1};
847 gMC->Gsvolu("FFEA", "BOX ", idtmed[502], feaParam1, 3); // G10
848
849 Float_t al1[3] = {9.5, 0.5, 0.25};
850 gMC->Gsvolu("FAL1", "BOX ", idtmed[505], al1, 3); // Aluminium
851 Float_t al2[3] = {7.2, 0.8, 0.25};
852 gMC->Gsvolu("FAL2", "BOX ", idtmed[505], al2, 3); // Aluminium
853 Float_t al3[3] = {3.35, 3.7, 0.1};
854 gMC->Gsvolu("FAL3", "BOX ", idtmed[505], al3, 3); // Aluminium
855
856 gMC->Gspos("FFEA", 1, "FCA1", 0., 0., -carpar[2]+feaParam1[2], 0, "ONLY");
857 gMC->Gspos("FAL1", 1, "FCA1", 0., carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
858 gMC->Gspos("FAL3", 1, "FCA1", 0., carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
859 gMC->Gspos("FAL2", 1, "FCA1", 0., carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
860
861
862 gMC->Gspos("FFEA", 2, "FCA2", -(feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY");
863 gMC->Gspos("FAL1", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
864 gMC->Gspos("FAL3", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
865 gMC->Gspos("FAL2", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
866
867 gMC->Gspos("FFEA", 3, "FCA2", (feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY");
868 gMC->Gspos("FAL1", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY");
869 gMC->Gspos("FAL3", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY");
870 gMC->Gspos("FAL2", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY");
871
872 Float_t feaRoof1[3] = {9.5, 0.25, 1.7};
873 gMC->Gsvolu("FRO1", "BOX ", idtmed[505], feaRoof1, 3); // Aluminium
874 Float_t feaRoof2[3] = {3.35, 0.05, 1.5};
875 gMC->Gsvolu("FRO2", "BOX ", idtmed[505], feaRoof2, 3); // Aluminium
876 Float_t feaRoof3[3] = {3.35, feaRoof1[1]+feaRoof2[1], 0.1};
877 gMC->Gsvolu("FRO3", "BOX ", idtmed[505], feaRoof3, 3); // Aluminium
878
879 Float_t feaRoof4[3] = {3.35,
880 0.05,
881 carpar[2]-feaParam1[2]-al1[2]-al3[2]};
882 gMC->Gsvolu("FRO4", "BOX ", idtmed[505], feaRoof4, 3); // Aluminium
883
884 Float_t bar[3] = {8.575, 0.6, 0.15};
885 gMC->Gsvolu("FBAR", "BOX ", idtmed[505], bar, 3); // Aluminium
886
dfef1a15 887
888 // tube volume definition
889 Float_t tubepar[3] = {0., 0.4, xFLT*0.5-15.};
890 gMC->Gsvolu("FTUB", "TUBE", idtmed[513], tubepar, 3); // copper cooling tubes
891 //tubepar[0]= 0.;
892 tubepar[1]= 0.3;
893 //tubepar[2]= xFLT*0.5 - 15.;
894 gMC->Gsvolu("FITU", "TUBE", idtmed[510], tubepar, 3); // cooling water
895 // Positioning of the water tube into the steel one
896 gMC->Gspos("FITU",1,"FTUB",0.,0.,0.,0,"ONLY");
897
898 // cable
899 Float_t cbpar[3] = {0., 0.5, tubepar[2]};
900 gMC->Gsvolu("FCAB", "TUBE", idtmed[511], cbpar, 3); // copper+alu
901
902 // Alluminium components
903 Float_t lonpar[3] = {tubepar[2], 6.15, 0.7};
904 gMC->Gsvolu("FTLN", "BOX ", idtmed[505], lonpar, 3); // alluminium
905 lonpar[0] = 2.;
906 lonpar[1] = 1.;
907 lonpar[2] = zlenA*0.5;
908 gMC->Gsvolu("FLON", "BOX ", idtmed[505], lonpar, 3); // alluminium
909
910 // rotation matrix
911 AliMatrix(idrotm[99], 180., 90., 90., 90., 90., 0.);
9f8488c2 912 AliMatrix(idrotm[98], 90.,180., 90., 90.,180., 0.);
dfef1a15 913
914 // cards, tubes, cables positioning
915 Float_t carpos[3], rowstep = 6.66, ytub= 3.65, ycab= ytub-3.;
916 Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4};
917 Int_t row, rowb[5] = {6, 7, 6, 19, 7}, nrow;
918 carpos[0] = 25. - xtof*0.5;
919 carpos[1] = (11.5 - (ytof*0.5 - kHoneycombLayerThickness))*0.5;
920 row = 1;
921 for (Int_t sg= -1; sg< 2; sg+= 2) {
922 carpos[2] = sg*zlenA*0.5;
923 for (Int_t nb=0; nb<5; ++nb) {
924 carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
925 nrow = row + rowb[nb];
926 for ( ; row < nrow ; ++row) {
9f8488c2 927
dfef1a15 928 carpos[2] -= sg*rowstep;
9f8488c2 929
930 if (nb==4) {
931 gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY");
932 gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
933 gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], 0, "ONLY");
934
935 //gMC->Gspos("FTUB", row, "FAIA", 0., ytub, carpos[2]-sg, idrotm[99], "ONLY");
936 gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY");
937 gMC->Gspos("FCAB", row, "FAIA", 0., ycab, carpos[2]-1.1, idrotm[99], "ONLY");
938
939 gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
940 gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
941 gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
942 gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
943
944 gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
945 gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
946 gMC->Gspos("FRO2",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
947 gMC->Gspos("FRO2",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
948
949 gMC->Gspos("FRO3",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY");
950 gMC->Gspos("FRO3",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY");
951 gMC->Gspos("FRO3",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY");
952 gMC->Gspos("FRO3",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY");
953
954 gMC->Gspos("FRO4",4*row, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
955 gMC->Gspos("FRO4",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
956 gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
957 gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
958
959 gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
960 gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
961 gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
962 gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
963
964 }
965 else {
966 switch (sg) {
967 case 1:
968 gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY");
969 gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
970 gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], 0, "ONLY");
971 break;
972 case -1:
973 gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY");
974 gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY");
975 gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], idrotm[98], "ONLY");
976 break;
977 }
978
979 //gMC->Gspos("FTUB", row, "FAIA", 0., ytub, carpos[2]-sg, idrotm[99], "ONLY");
980 gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY");
981 gMC->Gspos("FCAB", row, "FAIA", 0., ycab, carpos[2]-sg*1.1, idrotm[99], "ONLY");
982
983 gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
984 gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
985 gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
986 gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
987
988 gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
989 gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
990 gMC->Gspos("FRO2",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
991 gMC->Gspos("FRO2",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
992
993 gMC->Gspos("FRO3",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
994 gMC->Gspos("FRO3",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
995 gMC->Gspos("FRO3",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
996 gMC->Gspos("FRO3",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
997
998 gMC->Gspos("FRO4",4*row, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
999 gMC->Gspos("FRO4",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1000 gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1001 gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1002
1003 gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1004 gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1005 gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1006 gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1007
1008 }
dfef1a15 1009 }
1010 }
1011 gMC->Gspos("FTLN", 5+4*sg, "FAIA", 0., -0.1, 369.9*sg, 0, "ONLY");
1012 gMC->Gspos("FTLN", 5+3*sg, "FAIA", 0., -0.1, 366.9*sg, 0, "ONLY");
1013 gMC->Gspos("FTLN", 5+2*sg, "FAIA", 0., -0.1, 198.8*sg, 0, "ONLY");
1014 gMC->Gspos("FTLN", 5+sg, "FAIA", 0., -0.1, 56.82*sg, 0, "ONLY");
1015 }
9f8488c2 1016 gMC->Gspos("FCA1", 182, "FAIA", carpos[0],carpos[1],0., 0,"ONLY");
1017 gMC->Gspos("FCA1", 181, "FAIA",-carpos[0],carpos[1],0., 0,"ONLY");
dfef1a15 1018 gMC->Gspos("FCA2", 91, "FAIA", 0., carpos[1], 0., 0, "ONLY");
9f8488c2 1019
1020 //gMC->Gspos("FTUB", 91, "FAIA", 0., ytub, -1., idrotm[99], "ONLY");
1021 gMC->Gspos("FTUB", 91, "FAIA", 0., carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY");
1022 gMC->Gspos("FCAB", 91, "FAIA", 0., ycab, -1.1, idrotm[99], "ONLY");
1023
1024 gMC->Gspos("FRO1",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
1025 gMC->Gspos("FRO1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
1026 gMC->Gspos("FRO1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
1027 gMC->Gspos("FRO1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
1028
1029 gMC->Gspos("FRO2",364, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
1030 gMC->Gspos("FRO2",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
1031 gMC->Gspos("FRO2",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
1032 gMC->Gspos("FRO2",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
1033
1034 gMC->Gspos("FRO3",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY");
1035 gMC->Gspos("FRO3",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY");
1036 gMC->Gspos("FRO3",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY");
1037 gMC->Gspos("FRO3",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY");
1038
1039 gMC->Gspos("FRO4",364, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1040 gMC->Gspos("FRO4",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1041 gMC->Gspos("FRO4",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1042 gMC->Gspos("FRO4",361, "FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1043
1044 gMC->Gspos("FBAR",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1045 gMC->Gspos("FBAR",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1046 gMC->Gspos("FBAR",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1047 gMC->Gspos("FBAR",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1048
1049 gMC->Gspos("FLON", 2, "FAIA",-24., ytub+1.4, 0., 0, "MANY");
1050 gMC->Gspos("FLON", 1, "FAIA", 24., ytub+1.4, 0., 0, "MANY");
1051
1052
dfef1a15 1053 if (fTOFHoles) {
1054 row = 1;
1055 for (Int_t sg= -1; sg< 2; sg+= 2) {
1056 carpos[2] = sg*zlenA*0.5;
1057 for (Int_t nb=0; nb<4; ++nb) {
1058 carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep);
1059 nrow = row + rowb[nb];
1060 for ( ; row < nrow ; ++row) {
1061 carpos[2] -= sg*rowstep;
9f8488c2 1062
1063 switch (sg) {
1064 case 1:
1065 gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], 0,"ONLY");
1066 gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], 0,"ONLY");
1067 gMC->Gspos("FCA2", row, "FAIB", 0., carpos[1], carpos[2], 0, "ONLY");
1068 break;
1069 case -1:
1070 gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY");
1071 gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY");
1072 gMC->Gspos("FCA2", row, "FAIB", 0., carpos[1], carpos[2], idrotm[98], "ONLY");
1073 break;
1074 }
1075
1076 //gMC->Gspos("FTUB", row, "FAIB", 0., ytub,carpos[2]-sg, idrotm[99], "ONLY");
1077 gMC->Gspos("FTUB", row, "FAIB", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY");
1078 gMC->Gspos("FCAB", row, "FAIB", 0., ycab,carpos[2]-sg*1.1, idrotm[99], "ONLY");
1079
1080 gMC->Gspos("FRO1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
1081 gMC->Gspos("FRO1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
1082 gMC->Gspos("FRO1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
1083 gMC->Gspos("FRO1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY");
1084
1085 gMC->Gspos("FRO2",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
1086 gMC->Gspos("FRO2",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
1087 gMC->Gspos("FRO2",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
1088 gMC->Gspos("FRO2",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY");
1089
1090 gMC->Gspos("FRO3",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
1091 gMC->Gspos("FRO3",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
1092 gMC->Gspos("FRO3",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
1093 gMC->Gspos("FRO3",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY");
1094
1095 gMC->Gspos("FRO4",4*row, "FAIB", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1096 gMC->Gspos("FRO4",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1097 gMC->Gspos("FRO4",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1098 gMC->Gspos("FRO4",4*row-3,"FAIB",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY");
1099
1100 gMC->Gspos("FBAR",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1101 gMC->Gspos("FBAR",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1102 gMC->Gspos("FBAR",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1103 gMC->Gspos("FBAR",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY");
1104
dfef1a15 1105 }
1106 }
1107 gMC->Gspos("FTLN", 5+4*sg, "FAIB", 0., -0.1, 369.9*sg, 0, "ONLY");
1108 gMC->Gspos("FTLN", 5+3*sg, "FAIB", 0., -0.1, 366.9*sg, 0, "ONLY");
1109 gMC->Gspos("FTLN", 5+2*sg, "FAIB", 0., -0.1, 198.8*sg, 0, "ONLY");
1110 gMC->Gspos("FTLN", 5+sg, "FAIB", 0., -0.1, 56.82*sg, 0, "ONLY");
1111 }
9f8488c2 1112 gMC->Gspos("FLON", 2, "FAIB",-24., ytub+1.4, 0., 0, "MANY");
1113 gMC->Gspos("FLON", 1, "FAIB", 24., ytub+1.4, 0., 0, "MANY");
dfef1a15 1114 }
1115
1116 // Cables and tubes on the side blocks
1117 const Float_t kcbll = zlenA*0.5; // length of block
1118 const Float_t kcbllh = zlenA*0.5 - kInterCentrModBorder2; // length of block in case of hole
1119 const Float_t kcblw = 13.5; // width of block
1120 const Float_t kcblh1 = 2.; // min. heigth of block
1121 const Float_t kcblh2 = 12.3; // max. heigth of block
1122 // volume definition
1123 Float_t cblpar[11];
1124 tgal = (kcblh2 - kcblh1)/(2.*kcbll);
1125 cblpar[0] = kcblw *0.5;
1126 cblpar[1] = 0.;
1127 cblpar[2] = 0.;
1128 cblpar[3] = kcbll *0.5;
1129 cblpar[4] = kcblh1 *0.5;
1130 cblpar[5] = kcblh2 *0.5;
1131 cblpar[6] = TMath::ATan(tgal)*kRaddeg;
1132 cblpar[7] = kcbll *0.5;
1133 cblpar[8] = kcblh1 *0.5;
1134 cblpar[9] = kcblh2 *0.5;
1135 cblpar[10]= cblpar[6];
1136 gMC->Gsvolu("FCBL", "TRAP", idtmed[512], cblpar, 11); // cables & tubes mix
1137 Float_t sawpar[3] = {0.5, kcblh2*0.5, kcbll};
1138 gMC->Gsvolu("FSAW", "BOX ", idtmed[505], sawpar, 3); // Side Al walls
1139 // volume positioning
1140 AliMatrix(idrotm[7], 90., 90., 180., 0., 90., 180.);
1141 AliMatrix(idrotm[8], 90., 90., 0., 0., 90., 0.);
1142 xcoor = (xtof-kcblw)*0.5 - 2.*sawpar[0];
1143 ycoor = (kcblh1+kcblh2)*0.25 - (ytof*0.5 - kHoneycombLayerThickness)*0.5;
1144 zcoor = kcbll*0.5;
1145 gMC->Gspos("FCBL", 1, "FAIA", -xcoor, ycoor, -zcoor, idrotm[7], "ONLY");
1146 gMC->Gspos("FCBL", 2, "FAIA", xcoor, ycoor, -zcoor, idrotm[7], "ONLY");
1147 gMC->Gspos("FCBL", 3, "FAIA", -xcoor, ycoor, zcoor, idrotm[8], "ONLY");
1148 gMC->Gspos("FCBL", 4, "FAIA", xcoor, ycoor, zcoor, idrotm[8], "ONLY");
1149 xcoor = xtof*0.5-sawpar[0];
1150 ycoor = (kcblh2 - ytof*0.5 + kHoneycombLayerThickness)*0.5;
1151 gMC->Gspos("FSAW", 1, "FAIA", -xcoor, ycoor, 0., 0, "ONLY");
1152 gMC->Gspos("FSAW", 2, "FAIA", xcoor, ycoor, 0., 0, "ONLY");
1153 if (fTOFHoles) {
1154 cblpar[3] = kcbllh *0.5;
1155 cblpar[5] = kcblh1*0.5 + kcbllh*tgal;
1156 cblpar[7] = kcbllh *0.5;
1157 cblpar[9] = cblpar[5];
1158 gMC->Gsvolu("FCBB", "TRAP", idtmed[512], cblpar, 11); // cables & tubes mix
1159 xcoor = (xtof - kcblw)*0.5 - 2.*sawpar[0];
1160 ycoor = (kcblh1 + 2.*cblpar[5])*0.25 - (ytof*0.5 - kHoneycombLayerThickness)*0.5;
1161 zcoor = kcbll-kcbllh*0.5;
1162 gMC->Gspos("FCBB", 1, "FAIB", -xcoor, ycoor, -zcoor, idrotm[7], "ONLY");
1163 gMC->Gspos("FCBB", 2, "FAIB", xcoor, ycoor, -zcoor, idrotm[7], "ONLY");
1164 gMC->Gspos("FCBB", 3, "FAIB", -xcoor, ycoor, zcoor, idrotm[8], "ONLY");
1165 gMC->Gspos("FCBB", 4, "FAIB", xcoor, ycoor, zcoor, idrotm[8], "ONLY");
1166 xcoor = xtof*0.5 - sawpar[0];
1167 ycoor = (kcblh2 - ytof*0.5 + kHoneycombLayerThickness)*0.5;
1168 gMC->Gspos("FSAW", 1, "FAIB", -xcoor, ycoor, 0., 0, "ONLY");
1169 gMC->Gspos("FSAW", 2, "FAIB", xcoor, ycoor, 0., 0, "ONLY");
1170 }
1171
1172 // TOF Supermodule cover definition and positioning
1173 Float_t covpar[3] = {xtof*0.5, 0.1, zlenA*0.5};
1174 gMC->Gsvolu("FCOV", "BOX ", idtmed[505], covpar, 3); // Al cover
1175 xcoor = 0.;
1176 ycoor = 12.5*0.5 - 0.1;
1177 zcoor = 0.;
1178 gMC->Gspos("FCOV", 0, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY");
1179 if (fTOFHoles) gMC->Gspos("FCOV", 0, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY");
1180
1181 // Services Volumes
1182
1183 // Empty crate weight: 50 Kg, electronics cards + cables ~ 52 Kg.
1184 // Per each side (A and C) the total weight is: 2x102 ~ 204 Kg.
1185 // ... + weight of the connection pannel for the steel cooling system (Cr 18%, Ni 12%, Fe 70%)
1186 // + other remaining elements + various supports
1187
1188 // Each FEA card weight + all supports
1189 // (including all bolts and not including the cable connectors)
1190 // 353.1 g.
1191 // Per each strip there are 4 FEA cards, then
1192 // the total weight of the front-end electonics section is: 353.1 g x 4 = 1412.4 g.
1193
1194 Float_t serpar[3] = {29.*0.5, 121.*0.5, 90.*0.5};
1195 gMC->Gsvolu("FTOS", "BOX ", idtmed[515], serpar, 3); // Al + Cu + steel
1196 zcoor = (118.-90.)*0.5;
1197 Float_t phi = -10., ra = fTOFGeometry->Rmin() + ytof*0.5;
1198 for (Int_t i = 0; i < fTOFGeometry->NSectors(); i++) {
1199 phi += 20.;
1200 xcoor = ra * TMath::Cos(phi * kDegrad);
1201 ycoor = ra * TMath::Sin(phi * kDegrad);
1202 AliMatrix(idrotm[20+i], 90., phi, 90., phi + 270., 0., 0.);
1203 gMC->Gspos("FTOS", i, "BFMO", xcoor, ycoor, zcoor, idrotm[20+i], "ONLY");
1204 }
1205 zcoor = (90. - 223.)*0.5;
1206 gMC->Gspos("FTOS", 1, "BBCE", ra, 0., zcoor, 0, "ONLY");
1207
1208}
1209//_____________________________________________________________________________
1210void AliTOFv6T0::DrawModule() const
1211{
1212 //
1213 // Draw a shaded view of the Time Of Flight version 5
1214 //
1215
1216 // Set everything unseen
1217 gMC->Gsatt("*", "seen", -1);
1218
1219 //
1220 //Set volumes visible
1221 //
1222
1223 //Set ALIC mother transparent
1224 gMC->Gsatt("ALIC","SEEN", 0);
1225
1226//=====> Level 1
1227 // Level 1 for TOF volumes
1228 gMC->Gsatt("B077","seen", 0);
1229
1230//=====> Level 2
1231 // Level 2 for TOF volumes
1232 gMC->Gsatt("B071","seen", 0);
1233 gMC->Gsatt("B074","seen", 0);
1234 gMC->Gsatt("B075","seen", 0);
1235 gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
1236 gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level
1237
1238 // Level 2 of B071
1239 gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels -
1240 gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
1241 gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
1242 gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
1243 gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
1244
1245 char name[16];
1246 for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
1247 sprintf(name, "BREF%d",isec);
1248 gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped -
1249 sprintf(name, "BTRD%d",isec);
1250 gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped -
1251 sprintf(name, "BTOF%d",isec);
1252 gMC->Gsatt(name,"seen",-2); // all BTOF%d sub-levels skipped -
1253 }
1254
1255 gMC->Gdopt("hide", "on");
1256 gMC->Gdopt("shad", "on");
1257 gMC->Gsatt("*", "fill", 7);
1258 gMC->SetClipBox(".");
1259 gMC->SetClipBox("*", 100, 1000, 100, 1000, 100, 1000);
1260 gMC->DefaultRange();
1261 gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018);
1262 gMC->Gdhead(1111, "Time Of Flight");
1263 gMC->Gdman(18, 3, "MAN");
1264 gMC->Gdopt("hide","off");
1265}
1266//_____________________________________________________________________________
1267void AliTOFv6T0::DrawDetectorModules() const
1268{
1269 //
1270 // Draw a shaded view of the TOF detector SuperModules version 5
1271 //
1272
1273 // Set everything unseen
1274 gMC->Gsatt("*", "seen", -1);
1275
1276 //
1277 //Set volumes visible
1278 //
1279
1280 //Set ALIC mother transparent
1281 gMC->Gsatt("ALIC","SEEN", 0);
1282
1283//=====> Level 1
1284 // Level 1 for TOF volumes
1285 gMC->Gsatt("B077","seen", 0);
1286
1287//=====> Level 2
1288 // Level 2 for TOF volumes
1289 gMC->Gsatt("B071","seen", 0);
1290 gMC->Gsatt("B074","seen", 0);
1291 gMC->Gsatt("B075","seen", 0);
1292 gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
1293 gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level
1294
1295 // Level 2 of B071
1296 gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels -
1297 gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
1298 gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
1299 gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
1300 gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
1301
1302 char name[16];
1303 for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
1304 sprintf(name, "BREF%d",isec);
1305 gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped -
1306 sprintf(name, "BTRD%d",isec);
1307 gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped -
1308 sprintf(name, "BTOF%d",isec);
1309 gMC->Gsatt(name,"seen", 0); // all BTOF%d sub-levels skipped -
1310 }
1311
1312 // Level 3 of B071, B075 and B074
1313 gMC->Gsatt("FTOA","seen",-2); // all FTOA sub-levels skipped -
1314 if (fTOFHoles) gMC->Gsatt("FTOB","seen",-2); // all FTOB sub-levels skipped -
1315 if (fTOFHoles) gMC->Gsatt("FTOC","seen",-2); // all FTOC sub-levels skipped -
1316
1317 // Level 3 of B071, B075 and B074
1318 gMC->Gsatt("FAIA","seen",-1); // all FAIA sub-levels skipped -
1319 if (fTOFHoles) gMC->Gsatt("FAIB","seen",-1); // all FAIB sub-levels skipped -
1320
1321 // Level 3 of B071, B075 and B074
1322 gMC->Gsatt("FPEA","seen",1); // all FPEA sub-levels skipped -
1323 if (fTOFHoles) gMC->Gsatt("FPEB","seen",1); // all FPEB sub-levels skipped -
1324
1325 gMC->Gdopt("hide","on");
1326 gMC->Gdopt("shad","on");
1327 gMC->Gsatt("*", "fill", 5);
1328 gMC->SetClipBox(".");
1329 gMC->SetClipBox("*", 100, 1000, 100, 1000, 0, 1000);
1330 gMC->DefaultRange();
1331 gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018);
1332 gMC->Gdhead(1111,"TOF detector");
1333 gMC->Gdman(18, 3, "MAN");
1334 gMC->Gdopt("hide","off");
1335}
1336
1337//_____________________________________________________________________________
1338void AliTOFv6T0::DrawDetectorStrips() const
1339{
1340 //
1341 // Draw a shaded view of the TOF strips for version 5
1342 //
1343
1344 // Set everything unseen
1345 gMC->Gsatt("*", "seen", -1);
1346
1347 //
1348 //Set volumes visible
1349 //
1350
1351 //Set ALIC mother transparent
1352 gMC->Gsatt("ALIC","SEEN", 0);
1353
1354//=====> Level 1
1355 // Level 1 for TOF volumes
1356 gMC->Gsatt("B077","seen", 0);
1357
1358//=====> Level 2
1359 // Level 2 for TOF volumes
1360 gMC->Gsatt("B071","seen", 0);
1361 gMC->Gsatt("B074","seen", 0);
1362 gMC->Gsatt("B075","seen", 0);
1363 gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
1364 gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level
1365
1366 // Level 2 of B071
1367 gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
1368 gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
1369 gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
1370 gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels -
1371 gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
1372
1373 char name[16];
1374 for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) {
1375 sprintf(name, "BREF%d",isec);
1376 gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped -
1377 sprintf(name, "BTRD%d",isec);
1378 gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped -
1379 sprintf(name, "BTOF%d",isec);
1380 gMC->Gsatt(name,"seen", 0); // all BTOF%d sub-levels skipped -
1381 }
1382
1383 // Level 3 of B071, B074 and B075
1384 gMC->Gsatt("FTOA","SEEN", 0);
1385 if (fTOFHoles) gMC->Gsatt("FTOB","SEEN", 0);
1386 if (fTOFHoles) gMC->Gsatt("FTOC","SEEN", 0);
1387
1388 // Level 4 of B071, B074 and B075
1389 gMC->Gsatt("FLTA","SEEN", 0);
1390 if (fTOFHoles) gMC->Gsatt("FLTB","SEEN", 0);
1391 if (fTOFHoles) gMC->Gsatt("FLTC","SEEN", 0);
1392
1393 // Level 5 of B071, B074 and B075
1394 gMC->Gsatt("FAIA","SEEN", 0);
1395 if (fTOFHoles) gMC->Gsatt("FAIB","SEEN", 0);
1396
1397 gMC->Gsatt("FPEA","SEEN", 1);
1398 if (fTOFHoles) gMC->Gsatt("FPEB","SEEN", 1);
1399
1400 gMC->Gsatt("FSTR","SEEN",-2); // all FSTR sub-levels skipped -
1401
1402 gMC->Gsatt("FWZ1","SEEN", 1);
1403 gMC->Gsatt("FWZ2","SEEN", 1);
1404 gMC->Gsatt("FWZ3","SEEN", 1);
1405 gMC->Gsatt("FWZ4","SEEN", 1);
1406
1407
1408 // Level 2 of FAIA
1409 // Level 2 of FAIB
1410 gMC->Gsatt("FCA1","SEEN", 0);
1411 gMC->Gsatt("FCA2","SEEN", 0);
1412 gMC->Gsatt("FCAB","SEEN", 0);
1413 gMC->Gsatt("FTUB","SEEN",-1); // all FTUB sub-levels skipped -
1414 gMC->Gsatt("FTLN","SEEN", 0);
1415 gMC->Gsatt("FLTN","SEEN", 0);
1416 gMC->Gsatt("FCBL","SEEN", 0);
1417 gMC->Gsatt("FSAW","SEEN", 0);
1418 gMC->Gsatt("FCOV","SEEN", 0);
1419 if (fTOFHoles) gMC->Gsatt("FCBB","SEEN", 0);
1420
1421 // Level 2 of FTUB
1422 gMC->Gsatt("FITU","SEEN", 0);
1423
1424 // Level 2 of FSTR
1425 gMC->Gsatt("FHON","SEEN", 1);
1426 gMC->Gsatt("FPC1","SEEN", 1);
1427 gMC->Gsatt("FPC2","SEEN", 1);
1428 gMC->Gsatt("FPCB","SEEN", 1);
1429 gMC->Gsatt("FRGL","SEEN", 1);
1430 gMC->Gsatt("FGLF","SEEN", 1);
1431
1432 // Level 2 of FPCB => Level 3 of FSTR
1433 gMC->Gsatt("FSEN","SEEN", 0);
1434 gMC->Gsatt("FSEZ","SEEN", 0);
1435 gMC->Gsatt("FPAD","SEEN", 1);
1436
1437 gMC->Gdopt("hide","on");
1438 gMC->Gdopt("shad","on");
1439 gMC->Gsatt("*", "fill", 5);
1440 gMC->SetClipBox(".");
1441 gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000);
1442 gMC->DefaultRange();
1443 gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018);
1444 gMC->Gdhead(1111,"TOF Strips");
1445 gMC->Gdman(18, 3, "MAN");
1446 gMC->Gdopt("hide","off");
1447}
1448
1449//_____________________________________________________________________________
1450void AliTOFv6T0::CreateMaterials()
1451{
1452 //
1453 // Define materials for the Time Of Flight
1454 //
1455
1456 //AliTOF::CreateMaterials();
1457
1458 AliMagF *magneticField = (AliMagF*)gAlice->Field();
1459
1460 Int_t isxfld = magneticField->Integ();
1461 Float_t sxmgmx = magneticField->Max();
1462
1463 Float_t we[7], na[7];
1464
1465 //--- Quartz (SiO2) to simulate float glass
1466 // density tuned to have correct float glass
1467 // radiation length
1468 Float_t aq[2] = { 28.09,16. };
1469 Float_t zq[2] = { 14.,8. };
1470 Float_t wq[2] = { 1.,2. };
1471 //Float_t dq = 2.55; // std value: 2.2
1472 Float_t dq = 2.7; // (+5.9%)
1473 Int_t nq = -2;
1474
1475 // --- Nomex
1476 Float_t anox[4] = {12.01,1.01,16.00,14.01};
1477 Float_t znox[4] = { 6., 1., 8., 7.};
1478 Float_t wnox[4] = {14., 22., 2., 2.};
1479 //Float_t dnox = 0.048; //old value
1480 Float_t dnox = 0.22; // (x 4.6)
1481 Int_t nnox = -4;
1482
1483 // --- glass+freon { Si, O, C, F, H, S }
1484 Float_t agfr[6]= {28.09,16.00,12.01,19.00,1.01,32.065};
1485 Float_t zgfr[6]= {14., 8., 6., 9., 1., 16.};
1486 Float_t wgfr[6]= {0.465, 0.530, 0.000484, 0.00383, 4.0e-05, 0.000646};
1487 Int_t ngfr = 6;
1488 AliDebug(1,Form("wgfr: %d %d %d %d %d %d", wgfr[0], wgfr[1], wgfr[2], wgfr[3], wgfr[4], wgfr[5]));
1489 //Float_t dgfr = 1.35; // + FISHLINE (old value)
1490 Float_t dgfr = 1.6; // + FISHLINE(+18.5 %)
1491
1492 // --- G10 {Si, O, C, H, O}
1493 Float_t ag10[5] = {28.09,16.00,12.01,1.01,16.00};
1494 Float_t zg10[5] = {14., 8., 6., 1., 8.};
1495 Float_t wmatg10[5];
1496 Int_t nlmatg10 = 5;
1497 na[0]= 1. , na[1]= 2. , na[2]= 0. , na[3]= 0. , na[4]= 0.;
1498 MaterialMixer(we,ag10,na,5);
1499 wmatg10[0]= we[0]*0.6;
1500 wmatg10[1]= we[1]*0.6;
1501 na[0]= 0. , na[1]= 0. , na[2]= 14. , na[3]= 20. , na[4]= 3.;
1502 MaterialMixer(we,ag10,na,5);
1503 wmatg10[2]= we[2]*0.4;
1504 wmatg10[3]= we[3]*0.4;
1505 wmatg10[4]= we[4]*0.4;
1506 AliDebug(1,Form("wg10 %d %d %d %d %d", wmatg10[0], wmatg10[1], wmatg10[2], wmatg10[3], wmatg10[4]));
1507 // Float_t densg10 = 1.7; //old value
e41ca6a9 1508 Float_t densg10 = 2.0; // (+17.8%)
dfef1a15 1509
1510 // -- Water
1511 Float_t awa[2] = { 1., 16. };
1512 Float_t zwa[2] = { 1., 8. };
1513 Float_t wwa[2] = { 2., 1. };
1514 Float_t dwa = 1.0;
1515 Int_t nwa = -2;
1516
1517 // AIR
1518 Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
1519 Float_t zAir[4]={6.,7.,8.,18.};
1520 Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
1521 Float_t dAir = 1.20479E-3;
1522
1523 // --- fibre glass
1524 Float_t afg[4] = {28.09,16.00,12.01,1.01};
1525 Float_t zfg[4] = {14., 8., 6., 1.};
1526 Float_t wfg[4] = {0.12906,0.29405,0.51502,0.06187};
1527 //Float_t dfg = 1.111;
1528 Float_t dfg = 2.; // (+1.8%)
1529 Int_t nfg = 4;
1530
1531 // --- Freon C2F4H2 + SF6
1532 Float_t afre[4]= {12.01,1.01,19.00,32.07};
1533 Float_t zfre[4]= { 6., 1., 9., 16.};
1534 Float_t wfre[4]= {0.21250,0.01787,0.74827,0.021355};
1535 Float_t densfre= 0.00375;
1536 Int_t nfre = 4;
1537
1538 // --- Al + Cu + G10 {Al, Cu, Si, O, C, H, O}
9f8488c2 1539 Float_t acar[10]= {26.98,
1540 /*63.55,*/
1541 ag10[0], ag10[1], ag10[2], ag10[3], ag10[4],
1542 aAir[0], aAir[1], aAir[2], aAir[3]};
1543 Float_t zcar[10]= {13.,
1544 /*29.,*/
1545 zg10[0], zg10[1], zg10[2], zg10[3], zg10[4],
1546 zAir[0], zAir[1], zAir[2], zAir[3]};
1547 Float_t wcar[10];
1548 wcar[0]= 0.4732;//0.7;
1549 //wcar[1]= 0.04;//0.05;
1550 wcar[1]= 0.2854*wmatg10[0];//0.25*wmatg10[0];
1551 wcar[2]= 0.2854*wmatg10[1];//0.25*wmatg10[1];
1552 wcar[3]= 0.2854*wmatg10[2];//0.25*wmatg10[2];
1553 wcar[4]= 0.2854*wmatg10[3];//0.25*wmatg10[3];
1554 wcar[5]= 0.2854*wmatg10[4];//0.25*wmatg10[4];
1555 wcar[6]= 0.2414*wAir[0];
1556 wcar[7]= 0.2414*wAir[1];
1557 wcar[8]= 0.2414*wAir[2];
1558 wcar[9]= 0.2414*wAir[3];
1559
1560 AliDebug(1,Form("wcar %f %f %f %f %f %f %f %f %f %f", wcar[0], wcar[1], wcar[2], wcar[3], wcar[4],
1561 wcar[5], wcar[6], wcar[7], wcar[8], wcar[9]));
1562 Float_t dcar = 1.85;//1.9;
dfef1a15 1563
1564 // --- Cables, tubes {Al, Cu} ---
1565 Float_t acbt[2]= {26.98,63.55};
1566 Float_t zcbt[2]= {13., 29.};
1567 //Float_t wcbt[2]= {0.541,0.459};
1568 Float_t wcbt[2]= {0.407,0.593};
1569 //Float_t decbt = 0.95;
1570 Float_t decbt = 0.68;
1571
1572 // --- Cable {Al, Cu}
1573 Float_t wcb[2] = {0.165,0.835};
1574 Float_t decb = 0.962;
1575
1576 // --- Honeycomb layer {Al, Cu}
1577 Float_t whon[2]= {0.9,0.1};
1578 //Float_t dhon = 0.44;
1579 Float_t dhon = 1.095; // (x 2.56)
1580
1581 // --- Crates boxes {Al, Cu, Fe, Cr, Ni}
1582 Float_t acra[5]= {26.98,63.55,55.845,52.00,58.69};
1583 Float_t zcra[5]= {13., 29., 26., 24., 28.};
1584 Float_t wcra[5]= {0.7,0.2,0.07,0.018,0.012};
1585 Float_t dcra = 0.77;
1586
1587 AliMixture ( 0, "Air$", aAir, zAir, dAir, 4, wAir);
1588 AliMixture ( 1, "Nomex$", anox, znox, dnox, nnox, wnox);
1589 AliMixture ( 2, "G10$", ag10, zg10, densg10, nlmatg10, wmatg10);
1590 AliMixture ( 3, "fibre glass$", afg, zfg, dfg, nfg, wfg);
1591 AliMaterial( 4, "Al $", 26.98, 13., 2.7, 8.9, 37.2);
1592 AliMixture ( 5, "Al+Cu honeycomb$", acbt, zcbt, dhon, 2, whon);
1593 AliMixture ( 6, "Freon$", afre, zfre, densfre, nfre, wfre);
1594 AliMixture ( 7, "Glass$", aq, zq, dq, nq, wq);
1595 AliMixture ( 8, "glass-freon$", agfr, zgfr, dgfr, ngfr, wgfr);
1596 AliMixture ( 9, "Water$", awa, zwa, dwa, nwa, wwa);
1597 AliMixture (10, "Al+Cu$", acbt, zcbt, decbt, 2, wcbt);
9f8488c2 1598 AliMaterial(11, "Cu $", 63.54, 29., 8.96, 1.43, 10.);
dfef1a15 1599 AliMixture (12, "Al+Cu (cable)$", acbt, zcbt, decb, 2, wcb);
9f8488c2 1600 AliMixture (13, "Al+Cu+G10$", acar, zcar, dcar, 10/*7*/, wcar);
dfef1a15 1601 AliMixture (14, "Al+Cu+steel$", acra, zcra, dcra, 5, wcra);
9f8488c2 1602 AliMaterial(15, "Cu_sensitive$", 63.54, 29., 3.392, 1.43, 10.);
dfef1a15 1603
1604 Float_t epsil, stmin, deemax, stemax;
1605
1606 // STD data
1607 // EPSIL = 0.1 ! Tracking precision,
1608 // STEMAX = 0.1 ! Maximum displacement for multiple scattering
1609 // DEEMAX = 0.1 ! Maximum fractional energy loss, DLS
1610 // STMIN = 0.1
1611
1612 // TOF data
1613 epsil = .001; // Tracking precision,
1614 stemax = -1.; // Maximum displacement for multiple scattering
1615 deemax = -.3; // Maximum fractional energy loss, DLS
1616 stmin = -.8;
1617
1618 AliMedium( 1, "Air$", 0, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1619 AliMedium( 2,"Nomex$", 1, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1620 AliMedium( 3,"G10$", 2, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1621 AliMedium( 4,"fibre glass$", 3, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1622 AliMedium( 5,"glass-freon$", 8, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1623 AliMedium( 6,"Al Frame$", 4, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1624 AliMedium( 7,"honeycomb$", 5, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1625 AliMedium( 8,"Fre$", 6, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
9f8488c2 1626 AliMedium( 9,"Cu-S$", 15, 1, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
dfef1a15 1627 AliMedium(10,"Glass$", 7, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1628 AliMedium(11,"Water$", 9, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1629 AliMedium(12,"Cable$", 12, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1630 AliMedium(13,"Al+Cables$", 10, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1631 AliMedium(14,"Copper$", 11, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1632 AliMedium(15,"Cards$", 13, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1633 AliMedium(16,"Crates$", 14, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin);
1634
1635}
1636//_____________________________________________________________________________
1637void AliTOFv6T0::Init()
1638{
1639 //
1640 // Initialise the detector after the geometry has been defined
1641 //
1642 AliDebug(1, "**************************************"
1643 " TOF "
1644 "**************************************");
1645 AliDebug(1, " Version 4 of TOF initialing, "
1646 "symmetric TOF - Full Coverage version");
1647
1648 AliTOF::Init();
1649
1650 fIdFTOA = gMC->VolId("FTOA");
1651 if (fTOFHoles) {
1652 fIdFTOB = gMC->VolId("FTOB");
1653 fIdFTOC = gMC->VolId("FTOC");
1654 }
1655 fIdFLTA = gMC->VolId("FLTA");
1656 if (fTOFHoles) {
1657 fIdFLTB = gMC->VolId("FLTB");
1658 fIdFLTC = gMC->VolId("FLTC");
1659 }
1660
1661 AliDebug(1, "**************************************"
1662 " TOF "
1663 "**************************************");
1664}
1665
1666//_____________________________________________________________________________
1667void AliTOFv6T0::StepManager()
1668{
1669
1670 //
1671 // Procedure called at each step in the Time Of Flight
1672 //
1673
1674 TLorentzVector mom, pos;
1675 Float_t xm[3],pm[3],xpad[3],ppad[3];
1676 Float_t hits[14];
1677 Int_t vol[5];
1678 Int_t sector, plate, padx, padz, strip;
1679 Int_t copy, padzid, padxid, stripid, i;
1680 Int_t *idtmed = fIdtmed->GetArray()-499;
1681 Float_t incidenceAngle;
1682
1683 const char* volpath;
1684
1685 Int_t index = 0;
1686
1687 if(
1688 gMC->IsTrackEntering()
1689 && gMC->TrackCharge()
1690 //&& gMC->GetMedium()==idtmed[508]
1691 && gMC->CurrentMedium()==idtmed[508]
1692 && gMC->CurrentVolID(copy)==fIdSens
1693 )
1694 {
1695
1696 AliMC *mcApplication = (AliMC*)gAlice->GetMCApp();
1697
e6add757 1698 AddTrackReference(mcApplication->GetCurrentTrackNumber(), AliTrackReference::kTOF);
dfef1a15 1699 //AddTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber());
1700
1701 // getting information about hit volumes
1702
1703 padzid=gMC->CurrentVolOffID(1,copy);
1704 padz=copy;
1705 padz--;
1706
1707 padxid=gMC->CurrentVolOffID(0,copy);
1708 padx=copy;
1709 padx--;
1710
1711 stripid=gMC->CurrentVolOffID(4,copy);
1712 strip=copy;
1713 strip--;
1714
1715 gMC->TrackPosition(pos);
1716 gMC->TrackMomentum(mom);
1717
1718 Double_t normMom=1./mom.Rho();
1719
1720 // getting the coordinates in pad ref system
1721
1722 xm[0] = (Float_t)pos.X();
1723 xm[1] = (Float_t)pos.Y();
1724 xm[2] = (Float_t)pos.Z();
1725
1726 pm[0] = (Float_t)mom.X()*normMom;
1727 pm[1] = (Float_t)mom.Y()*normMom;
1728 pm[2] = (Float_t)mom.Z()*normMom;
1729
1730 gMC->Gmtod(xm,xpad,1); // from MRS to DRS: coordinates convertion
1731 gMC->Gmtod(pm,ppad,2); // from MRS to DRS: direction cosinus convertion
1732
1733
1734 if (TMath::Abs(ppad[1])>1) {
1735 AliWarning("Abs(ppad) > 1");
1736 ppad[1]=TMath::Sign((Float_t)1,ppad[1]);
1737 }
1738 incidenceAngle = TMath::ACos(ppad[1])*kRaddeg;
1739
1740 plate = -1;
1741 if (strip < fTOFGeometry->NStripC()) {
1742 plate = 0;
1743 //strip = strip;
1744 }
1745 else if (strip >= fTOFGeometry->NStripC() &&
1746 strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB()) {
1747 plate = 1;
1748 strip = strip - fTOFGeometry->NStripC();
1749 }
1750 else if (strip >= fTOFGeometry->NStripC() + fTOFGeometry->NStripB() &&
1751 strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA()) {
1752 plate = 2;
1753 strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB();
1754 }
1755 else if (strip >= fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA() &&
1756 strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA() + fTOFGeometry->NStripB()) {
1757 plate = 3;
1758 strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB() - fTOFGeometry->NStripA();
1759 }
1760 else {
1761 plate = 4;
1762 strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB() - fTOFGeometry->NStripA() - fTOFGeometry->NStripB();
1763 }
1764
1765 volpath=gMC->CurrentVolOffName(7);
1766 index=atoi(&volpath[4]);
1767 sector=-1;
1768 sector=index;
1769
1770 //Old 6h convention
1771 // if(index<5){
1772 // sector=index+13;
1773 // }
1774 // else{
1775 // sector=index-5;
1776 // }
1777
1778 for(i=0;i<3;++i) {
1779 hits[i] = pos[i];
1780 hits[i+3] = pm[i];
1781 }
1782
1783 hits[6] = mom.Rho();
1784 hits[7] = pos[3];
1785 hits[8] = xpad[0];
1786 hits[9] = xpad[1];
1787 hits[10]= xpad[2];
1788 hits[11]= incidenceAngle;
1789 hits[12]= gMC->Edep();
1790 hits[13]= gMC->TrackLength();
1791
1792 vol[0]= sector;
1793 vol[1]= plate;
1794 vol[2]= strip;
1795 vol[3]= padx;
1796 vol[4]= padz;
1797
1798 AddT0Hit(mcApplication->GetCurrentTrackNumber(),vol, hits);
1799 //AddT0Hit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits);
1800 }
1801}
1802//-------------------------------------------------------------------
1803void AliTOFv6T0::MaterialMixer(Float_t* p,Float_t* a,Float_t* m,Int_t n) const
1804{
1805 // a[] atomic weights vector (in)
1806 // (atoms present in more compound appear separately)
1807 // m[] number of corresponding atoms in the compound (in)
1808 Float_t t = 0.;
1809 for (Int_t i = 0; i < n; ++i) {
1810 p[i] = a[i]*m[i];
1811 t += p[i];
1812 }
1813 for (Int_t i = 0; i < n; ++i) {
1814 p[i] = p[i]/t;
1815 //AliDebug(1,Form((\n weight[%i] = %f (,i,p[i]));
1816 }
1817}