changed range for plot in GammaConv task
[u/mrichter/AliRoot.git] / TPC / Base / AliTPCPreprocessor.cxx
CommitLineData
54472e4f 1/**************************************************************************
2 * Copyright(c) 2007, ALICE Experiment at CERN, All rights reserved. *
3 * *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
6 * *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
15
72df5829 16
54472e4f 17#include "AliTPCPreprocessor.h"
a7dce0bc 18#include "AliShuttleInterface.h"
54472e4f 19
20#include "AliCDBMetaData.h"
21#include "AliDCSValue.h"
22#include "AliLog.h"
23#include "AliTPCSensorTempArray.h"
a7dce0bc 24#include "AliTPCROC.h"
25#include "AliTPCCalROC.h"
26#include "AliTPCCalPad.h"
27#include "AliTPCCalibPedestal.h"
9f016d99 28#include "AliTPCCalibPulser.h"
29#include "AliTPCCalibCE.h"
70f224dd 30#include "AliTPCCalibRaw.h"
dca91b3f 31#include "AliTPCdataQA.h"
eeeac1b2 32#include "ARVersion.h"
9e66a8dd 33#include "TFile.h"
7b54c8e9 34#include "TTree.h"
bb30a935 35#include "TGraph.h"
7b54c8e9 36#include "TEnv.h"
bb30a935 37#include "TParameter.h"
54472e4f 38
39#include <TTimeStamp.h>
40
a7dce0bc 41const Int_t kValCutTemp = 100; // discard temperatures > 100 degrees
42const Int_t kDiffCutTemp = 5; // discard temperature differences > 5 degrees
2b00f997 43const Double_t kHighVoltageDifference = 1e-4; // don't record High Voltage points
44 // differing by less than 1e-4 from
45 // previous point.
41c979ea 46const Double_t kGasCompositionDifference = 1e-3; // don't record Gas Composition points
47 // differing by less than 1e-3 from
48 // previous point
bb30a935 49const TString kPedestalRunType = "PEDESTAL"; // pedestal run identifier
9054511b 50const TString kPulserRunType = "PULSER"; // pulser run identifier
bdffc5fb 51const TString kPhysicsRunType = "PHYSICS"; // physics run identifier
9054511b 52const TString kCosmicRunType = "COSMIC"; // cosmic run identifier
53const TString kLaserRunType = "LASER"; // laser run identifier
9c754ce7 54const TString kDaqRunType = "DAQ"; // DAQ run identifier
87d77b35 55const TString kAmandaTemp = "TPC_PT_%d_TEMPERATURE"; // Amanda string for temperature entries
f6b5fa33 56const TString kAmandaDDL = "DDL%d"; // Amanda string for list of active DDLs
57const Int_t kNumDDL = 216; // number of TPC DDLs
58const Int_t kFirstDDL = 768; // identifier of first DDL
bee89eeb 59//const Double_t kFitFraction = 0.7; // Fraction of DCS sensor fits required
68b512ca 60const Double_t kFitFraction = -1.0; // Don't require minimum number of fits in commissioning run
09a746c5 61const Int_t kNumPressureSensors = 3; // number of pressure sensors
62const char* kPressureSensorNames[kNumPressureSensors] = {
63 "CavernAtmosPressure",
64 "CavernAtmosPressure2",
65 "SurfaceAtmosPressure" };
1fc96a8a 66const Int_t kMinCESectors = 32; // minimum number of sectors (per side)
67 // to accept CE calibration
09a746c5 68
cf4216a3 69
54472e4f 70//
71// This class is the SHUTTLE preprocessor for the TPC detector.
54472e4f 72//
73
74ClassImp(AliTPCPreprocessor)
75
76//______________________________________________________________________________________________
6d07bf74 77AliTPCPreprocessor::AliTPCPreprocessor(AliShuttleInterface* shuttle) :
78 AliPreprocessor("TPC",shuttle),
09a746c5 79 fConfEnv(0), fTemp(0), fHighVoltage(0), fHighVoltageStat(0), fGoofie(0),
41c979ea 80 fPressure(0), fGasComposition(0), fConfigOK(kTRUE), fROC(0)
54472e4f 81{
82 // constructor
a7dce0bc 83 fROC = AliTPCROC::Instance();
72534123 84
85 // define run types to be processed
86
87 AddRunType(kPedestalRunType);
88 AddRunType(kPulserRunType);
89 AddRunType(kPhysicsRunType);
72534123 90 AddRunType(kCosmicRunType);
91 AddRunType(kLaserRunType);
92 AddRunType(kDaqRunType);
93
54472e4f 94}
72df5829 95//______________________________________________________________________________________________
f4a89669 96 AliTPCPreprocessor::AliTPCPreprocessor(const AliTPCPreprocessor& ) :
97 AliPreprocessor("TPC",0),
09a746c5 98 fConfEnv(0), fTemp(0), fHighVoltage(0), fHighVoltageStat(0), fGoofie(0),
41c979ea 99 fPressure(0), fGasComposition(0), fConfigOK(kTRUE), fROC(0)
f4a89669 100 {
101
102 Fatal("AliTPCPreprocessor", "copy constructor not implemented");
f7f602cc 103//
104// // fTemp = new AliTPCSensorTempArray(*(org.fTemp));
f4a89669 105 }
54472e4f 106
107//______________________________________________________________________________________________
108AliTPCPreprocessor::~AliTPCPreprocessor()
109{
110 // destructor
a7dce0bc 111
54472e4f 112 delete fTemp;
bdffc5fb 113 delete fHighVoltage;
795dbd3b 114 delete fHighVoltageStat;
115 delete fGoofie;
33f6bae5 116 delete fGasComposition;
09a746c5 117 delete fPressure;
54472e4f 118}
72df5829 119//______________________________________________________________________________________________
120AliTPCPreprocessor& AliTPCPreprocessor::operator = (const AliTPCPreprocessor& )
121{
122 Fatal("operator =", "assignment operator not implemented");
123 return *this;
124}
125
54472e4f 126
127//______________________________________________________________________________________________
128void AliTPCPreprocessor::Initialize(Int_t run, UInt_t startTime,
129 UInt_t endTime)
130{
bb30a935 131
09a746c5 132 AliPreprocessor::Initialize(run, startTime, endTime);
54472e4f 133
134 AliInfo(Form("\n\tRun %d \n\tStartTime %s \n\tEndTime %s", run,
f4a89669 135 TTimeStamp((time_t)startTime,0).AsString(),
136 TTimeStamp((time_t)endTime,0).AsString()));
54472e4f 137
7b54c8e9 138 // Preprocessor configuration
139
37092b2b 140 AliCDBEntry* entry = GetFromOCDB("Config", "Preprocessor");
7b54c8e9 141 if (entry) fConfEnv = (TEnv*) entry->GetObject();
142 if ( fConfEnv==0 ) {
7b54c8e9 143 Log("AliTPCPreprocsessor: Preprocessor Config OCDB entry missing.\n");
37092b2b 144 fConfigOK = kFALSE;
145 return;
7b54c8e9 146 }
147
18eade96 148 // Temperature sensors
149
136e44f7 150 TTree *confTree = 0;
151
152 TString tempConf = fConfEnv->GetValue("Temperature","ON");
153 tempConf.ToUpper();
154 if (tempConf != "OFF" ) {
7b54c8e9 155 entry = GetFromOCDB("Config", "Temperature");
f7f602cc 156 if (entry) confTree = (TTree*) entry->GetObject();
18eade96 157 if ( confTree==0 ) {
18eade96 158 Log("AliTPCPreprocsessor: Temperature Config OCDB entry missing.\n");
159 fConfigOK = kFALSE;
f7f602cc 160 return;
18eade96 161 }
09a746c5 162 fTemp = new AliTPCSensorTempArray(startTime, endTime, confTree, kAmandaTemp);
18eade96 163 fTemp->SetValCut(kValCutTemp);
164 fTemp->SetDiffCut(kDiffCutTemp);
136e44f7 165 }
18eade96 166
bdffc5fb 167 // High voltage measurements
168
136e44f7 169 TString hvConf = fConfEnv->GetValue("HighVoltage","ON");
170 hvConf.ToUpper();
171 if (hvConf != "OFF" ) {
bdffc5fb 172 confTree=0;
173 entry=0;
174 entry = GetFromOCDB("Config", "HighVoltage");
175 if (entry) confTree = (TTree*) entry->GetObject();
176 if ( confTree==0 ) {
177 Log("AliTPCPreprocsessor: High Voltage Config OCDB entry missing.\n");
178 fConfigOK = kFALSE;
179 return;
180 }
03d57022 181 time_t timeStart = (time_t)(((TString)GetRunParameter("DAQ_time_start")).Atoi());
182 time_t timeEnd = (time_t)(((TString)GetRunParameter("DAQ_time_end")).Atoi());
183 fHighVoltage = new AliDCSSensorArray (UInt_t(timeStart),
184 UInt_t(timeEnd), confTree);
bff20895 185 }
9d2ce539 186
187 // High voltage status values
188
bff20895 189 TString hvStatConf = fConfEnv->GetValue("HighVoltageStat","ON");
190 hvStatConf.ToUpper();
191 if (hvStatConf != "OFF" ) {
9d2ce539 192 confTree=0;
193 entry=0;
194 entry = GetFromOCDB("Config", "HighVoltageStat");
195 if (entry) confTree = (TTree*) entry->GetObject();
196 if ( confTree==0 ) {
197 Log("AliTPCPreprocsessor: High Voltage Status Config OCDB entry missing.\n");
198 fConfigOK = kFALSE;
199 return;
200 }
fe7f3fe2 201 fHighVoltageStat = new AliDCSSensorArray(startTime, endTime, confTree);
bdffc5fb 202 }
b6e9fd45 203
204 // Goofie values
205
206 TString goofieConf = fConfEnv->GetValue("Goofie","ON");
207 goofieConf.ToUpper();
208 if (goofieConf != "OFF" ) {
209 confTree=0;
210 entry=0;
211 entry = GetFromOCDB("Config", "Goofie");
212 if (entry) confTree = (TTree*) entry->GetObject();
213 if ( confTree==0 ) {
214 Log("AliTPCPreprocsessor: Goofie Config OCDB entry missing.\n");
215 fConfigOK = kFALSE;
216 return;
217 }
09a746c5 218 fGoofie = new AliDCSSensorArray(startTime, endTime, confTree);
b6e9fd45 219 }
220
41c979ea 221
222 // Gas composition measurements
223
224 TString gasConf = fConfEnv->GetValue("GasComposition","OFF");
225 gasConf.ToUpper();
226 if (gasConf != "OFF" ) {
227 confTree=0;
228 entry=0;
229 entry = GetFromOCDB("Config", "GasComposition");
230 if (entry) confTree = (TTree*) entry->GetObject();
231 if ( confTree==0 ) {
232 Log("AliTPCPreprocsessor: Gas Composition Config OCDB entry missing.\n");
233 fConfigOK = kFALSE;
234 return;
235 }
236 time_t timeStart = (time_t)(((TString)GetRunParameter("DAQ_time_start")).Atoi());
237 time_t timeEnd = (time_t)(((TString)GetRunParameter("DAQ_time_end")).Atoi());
238 fGasComposition = new AliDCSSensorArray (UInt_t(timeStart),
239 UInt_t(timeEnd), confTree);
240 }
09a746c5 241 // Pressure values
242
243 TString runType = GetRunType();
244
245 if( runType == kPhysicsRunType ||
246 runType == kLaserRunType ) {
247 TString pressureConf = fConfEnv->GetValue("Pressure","ON");
248 pressureConf.ToUpper();
249 if (pressureConf != "OFF" ) {
250 TClonesArray * array = new TClonesArray("AliDCSSensor",kNumPressureSensors);
251 for(Int_t j = 0; j < kNumPressureSensors; j++) {
252 AliDCSSensor * sens = new ((*array)[j])AliDCSSensor;
253 sens->SetStringID(kPressureSensorNames[j]);
254 }
255 fPressure = new AliDCSSensorArray(startTime, endTime, array);
256 }
257 }
54472e4f 258}
259
260//______________________________________________________________________________________________
261UInt_t AliTPCPreprocessor::Process(TMap* dcsAliasMap)
262{
263 // Fills data into TPC calibrations objects
264
54472e4f 265 // Amanda servers provide information directly through dcsAliasMap
266
bb30a935 267
a7dce0bc 268 if (!fConfigOK) return 9;
136e44f7 269 UInt_t result = 0;
bb30a935 270 TObjArray *resultArray = new TObjArray();
271 TString errorHandling = fConfEnv->GetValue("ErrorHandling","ON");
272 errorHandling.ToUpper();
273 TObject * status;
274
275 UInt_t dcsResult=0;
ff7d4b88 276 if (!dcsAliasMap) {
277 dcsResult=1;
278 } else {
279 if (dcsAliasMap->GetEntries() == 0 ) dcsResult=1;
280 }
cf4216a3 281 status = new TParameter<int>("dcsResult",dcsResult);
282 resultArray->Add(status);
bb30a935 283
284
a7dce0bc 285 TString runType = GetRunType();
286
cf4216a3 287 if ( dcsResult == 0 ) {
288
54472e4f 289 // Temperature sensors are processed by AliTPCCalTemp
72df5829 290
cf4216a3 291 TString tempConf = fConfEnv->GetValue("Temperature","ON");
292 tempConf.ToUpper();
293 if (tempConf != "OFF" ) {
294 UInt_t tempResult = MapTemperature(dcsAliasMap);
c589a949 295 if ( tempConf != "TRY") result+=tempResult;
cf4216a3 296 status = new TParameter<int>("tempResult",tempResult);
297 resultArray->Add(status);
298 }
18eade96 299
bdffc5fb 300 // High Voltage recordings
301
302
cf4216a3 303 TString hvConf = fConfEnv->GetValue("HighVoltage","ON");
304 hvConf.ToUpper();
305 if (hvConf != "OFF" ) {
306 UInt_t hvResult = MapHighVoltage(dcsAliasMap);
c589a949 307 if (hvConf != "TRY") result+=hvResult;
cf4216a3 308 status = new TParameter<int>("hvResult",hvResult);
309 resultArray->Add(status);
310 }
f7f602cc 311
cf4216a3 312 // Goofie values
b6e9fd45 313
314
cf4216a3 315 TString goofieConf = fConfEnv->GetValue("Goofie","ON");
316 goofieConf.ToUpper();
317 if (goofieConf != "OFF" ) {
318 UInt_t goofieResult = MapGoofie(dcsAliasMap);
c589a949 319 if (goofieConf != "TRY") result+=goofieResult;
cf4216a3 320 status = new TParameter<int>("goofieResult",goofieResult);
321 resultArray->Add(status);
322 }
09a746c5 323
41c979ea 324
325 // Gas composition recordings
326
327
88bca400 328 TString gasConf = fConfEnv->GetValue("GasComposition","OFF");
41c979ea 329 gasConf.ToUpper();
330 if (gasConf != "OFF" ) {
331 UInt_t gasResult = MapGasComposition(dcsAliasMap);
332 if (gasConf != "TRY") result+=gasResult;
333 status = new TParameter<int>("gasResult",gasResult);
334 resultArray->Add(status);
335 }
336
09a746c5 337 // Pressure values
338
339 if( runType == kPhysicsRunType ||
340 runType == kLaserRunType ) {
341
342 TString pressureConf = fConfEnv->GetValue("Pressure","ON");
343 pressureConf.ToUpper();
344 if (pressureConf != "OFF" ) {
345 UInt_t pressureResult = MapPressure(dcsAliasMap);
346 status = new TParameter<int>("pressureResult",pressureResult);
347 resultArray->Add(status);
348 }
349 }
cf4216a3 350 }
54472e4f 351 // Other calibration information will be retrieved through FXS files
a7dce0bc 352 // examples:
54472e4f 353 // TList* fileSourcesDAQ = GetFile(AliShuttleInterface::kDAQ, "pedestals");
354 // const char* fileNamePed = GetFile(AliShuttleInterface::kDAQ, "pedestals", "LDC1");
355 //
356 // TList* fileSourcesHLT = GetFile(AliShuttleInterface::kHLT, "calib");
357 // const char* fileNameHLT = GetFile(AliShuttleInterface::kHLT, "calib", "LDC1");
358
9f016d99 359 // pedestal entries
54472e4f 360
a7dce0bc 361 if(runType == kPedestalRunType) {
68b512ca 362 Int_t numSources = 1;
363 Int_t pedestalSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
7b54c8e9 364 TString source = fConfEnv->GetValue("Pedestal","DAQ");
365 source.ToUpper();
136e44f7 366 if (source != "OFF" ) {
367 if ( source == "HLT") pedestalSource[0] = AliShuttleInterface::kHLT;
368 if (!GetHLTStatus()) pedestalSource[0] = AliShuttleInterface::kDAQ;
369 if (source == "HLTDAQ" ) {
370 numSources=2;
371 pedestalSource[0] = AliShuttleInterface::kHLT;
372 pedestalSource[1] = AliShuttleInterface::kDAQ;
373 }
374 if (source == "DAQHLT" ) numSources=2;
375 UInt_t pedestalResult=0;
376 for (Int_t i=0; i<numSources; i++ ) {
453bd596 377 pedestalResult = ExtractPedestals(pedestalSource[i]);
136e44f7 378 if ( pedestalResult == 0 ) break;
379 }
380 result += pedestalResult;
bb30a935 381 status = new TParameter<int>("pedestalResult",pedestalResult);
382 resultArray->Add(status);
68b512ca 383 }
a7dce0bc 384 }
385
9f016d99 386 // pulser trigger processing
387
68b512ca 388 if(runType == kPulserRunType) {
389 Int_t numSources = 1;
390 Int_t pulserSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
9f016d99 391 TString source = fConfEnv->GetValue("Pulser","DAQ");
392 source.ToUpper();
136e44f7 393 if ( source != "OFF") {
394 if ( source == "HLT") pulserSource[0] = AliShuttleInterface::kHLT;
395 if (!GetHLTStatus()) pulserSource[0] = AliShuttleInterface::kDAQ;
396 if (source == "HLTDAQ" ) {
397 numSources=2;
398 pulserSource[0] = AliShuttleInterface::kHLT;
399 pulserSource[1] = AliShuttleInterface::kDAQ;
400 }
401 if (source == "DAQHLT" ) numSources=2;
c589a949 402 if (source == "TRY" ) numSources=2;
136e44f7 403 UInt_t pulserResult=0;
404 for (Int_t i=0; i<numSources; i++ ) {
405 pulserResult = ExtractPulser(pulserSource[i]);
406 if ( pulserResult == 0 ) break;
407 }
c589a949 408 if (source != "TRY") result += pulserResult;
bb30a935 409 status = new TParameter<int>("pulserResult",pulserResult);
410 resultArray->Add(status);
68b512ca 411 }
9f016d99 412 }
413
70f224dd 414
415// raw calibration processing
416
417 if(runType == kPhysicsRunType) {
418 Int_t numSources = 1;
419 Int_t rawSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
420 TString source = fConfEnv->GetValue("Raw","DAQ");
421 source.ToUpper();
422 if ( source != "OFF") {
423 if ( source == "HLT") rawSource[0] = AliShuttleInterface::kHLT;
424 if (!GetHLTStatus()) rawSource[0] = AliShuttleInterface::kDAQ;
425 if (source == "HLTDAQ" ) {
426 numSources=2;
427 rawSource[0] = AliShuttleInterface::kHLT;
428 rawSource[1] = AliShuttleInterface::kDAQ;
429 }
430 if (source == "DAQHLT" ) numSources=2;
c589a949 431 if (source == "TRY" ) numSources=2;
70f224dd 432 UInt_t rawResult=0;
433 for (Int_t i=0; i<numSources; i++ ) {
434 rawResult = ExtractRaw(rawSource[i]);
435 if ( rawResult == 0 ) break;
436 }
c589a949 437 if (source != "TRY" )result += rawResult;
70f224dd 438 status = new TParameter<int>("rawResult",rawResult);
439 resultArray->Add(status);
440 }
441 }
442
443
9054511b 444 // Altro configuration
445
446
447 TString altroConf = fConfEnv->GetValue("AltroConf","ON");
cf4216a3 448 altroConf.ToUpper();
9054511b 449 if (altroConf != "OFF" ) {
f6b5fa33 450 UInt_t altroResult = ExtractAltro(AliShuttleInterface::kDCS,dcsAliasMap);
c589a949 451 if (altroConf != "TRY" ) result+=altroResult;
9054511b 452 status = new TParameter<int>("altroResult",altroResult);
453 resultArray->Add(status);
454 }
68b512ca 455
456
9f016d99 457 // Central Electrode processing
458
9054511b 459 if( runType == kPhysicsRunType ||
6f3699dd 460 runType == kLaserRunType ) {
68b512ca 461
462 Int_t numSources = 1;
463 Int_t ceSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
9f016d99 464 TString source = fConfEnv->GetValue("CE","DAQ");
465 source.ToUpper();
136e44f7 466 if ( source != "OFF" ) {
467 if ( source == "HLT") ceSource[0] = AliShuttleInterface::kHLT;
468 if (!GetHLTStatus()) ceSource[0] = AliShuttleInterface::kDAQ;
469 if (source == "HLTDAQ" ) {
68b512ca 470 numSources=2;
471 ceSource[0] = AliShuttleInterface::kHLT;
472 ceSource[1] = AliShuttleInterface::kDAQ;
136e44f7 473 }
474 if (source == "DAQHLT" ) numSources=2;
c589a949 475 if (source == "TRY" ) numSources=2;
136e44f7 476 UInt_t ceResult=0;
477 for (Int_t i=0; i<numSources; i++ ) {
478 ceResult = ExtractCE(ceSource[i]);
479 if ( ceResult == 0 ) break;
480 }
6f3699dd 481
482 // only flag error if CE result is missing from LASER runs
483 // -- for PHYSICS run do CE processing if data available
484
dee76880 485 if ( runType == kLaserRunType && source != "TRY" && ceResult<10 ) result += ceResult;
bb30a935 486 status = new TParameter<int>("ceResult",ceResult);
487 resultArray->Add(status);
dca91b3f 488
489 numSources = 1;
490 Int_t qaSource[2] = {AliShuttleInterface::kDAQ,AliShuttleInterface::kHLT} ;
5e5c1e83 491 source = fConfEnv->GetValue("QA","DAQ");
dca91b3f 492 source.ToUpper();
493 if ( source != "OFF" ) {
494 if ( source == "HLT") qaSource[0] = AliShuttleInterface::kHLT;
495 if (!GetHLTStatus()) qaSource[0] = AliShuttleInterface::kDAQ;
496 if (source == "HLTDAQ" ) {
497 numSources=2;
498 qaSource[0] = AliShuttleInterface::kHLT;
499 qaSource[1] = AliShuttleInterface::kDAQ;
500 }
501 if (source == "DAQHLT" ) numSources=2;
c589a949 502 if (source == "TRY" ) numSources=2;
dca91b3f 503 UInt_t qaResult=0;
504 for (Int_t i=0; i<numSources; i++ ) {
505 qaResult = ExtractQA(qaSource[i]);
506 if ( qaResult == 0 ) break;
507 }
508// result += qaResult;
509 if ( qaResult !=0 ) Log ("ExtractQA failed, no QA entry available.");
510 status = new TParameter<int>("qaResult",qaResult);
511 resultArray->Add(status);
68b512ca 512 }
dca91b3f 513 }
9f016d99 514 }
136e44f7 515
c589a949 516// Store component status to OCDB
517
518 AliCDBMetaData metaData;
519 metaData.SetBeamPeriod(0);
520 metaData.SetResponsible("Haavard Helstrup");
0492edf5 521 metaData.SetAliRootVersion(ALIROOT_BRANCH);
c589a949 522 metaData.SetComment("Preprocessor AliTPC status.");
f085dc93 523 Bool_t storeOK = Store("Calib", "PreprocStatus", resultArray, &metaData, 0, kFALSE);
524 if (!storeOK) Log ("Unable to store preprocessor status entry");
525
c589a949 526 resultArray->Delete();
527 delete resultArray;
528
529 if (errorHandling == "OFF" ) return 0;
530 return result;
531
54472e4f 532}
533//______________________________________________________________________________________________
534UInt_t AliTPCPreprocessor::MapTemperature(TMap* dcsAliasMap)
535{
536
537 // extract DCS temperature maps. Perform fits to save space
538
72df5829 539 UInt_t result=0;
54472e4f 540 TMap *map = fTemp->ExtractDCS(dcsAliasMap);
541 if (map) {
542 fTemp->MakeSplineFit(map);
68b512ca 543 Double_t fitFraction = 1.0*fTemp->NumFits()/fTemp->NumSensors();
67a165ed 544 if (fitFraction > kFitFraction ) {
545 AliInfo(Form("Temperature values extracted, fits performed.\n"));
546 } else {
547 Log ("Too few temperature maps fitted. \n");
548 result = 9;
549 }
54472e4f 550 } else {
67a165ed 551 Log("No temperature map extracted. \n");
72df5829 552 result=9;
54472e4f 553 }
554 delete map;
555 // Now store the final CDB file
a7dce0bc 556
557 if ( result == 0 ) {
72df5829 558 AliCDBMetaData metaData;
54472e4f 559 metaData.SetBeamPeriod(0);
560 metaData.SetResponsible("Haavard Helstrup");
0492edf5 561 metaData.SetAliRootVersion(ALIROOT_BRANCH);
54472e4f 562 metaData.SetComment("Preprocessor AliTPC data base entries.");
563
a7dce0bc 564 Bool_t storeOK = Store("Calib", "Temperature", fTemp, &metaData, 0, kFALSE);
565 if ( !storeOK ) result=1;
566
72df5829 567 }
54472e4f 568
569 return result;
7b54c8e9 570
54472e4f 571}
09a746c5 572//______________________________________________________________________________________________
573UInt_t AliTPCPreprocessor::MapPressure(TMap* dcsAliasMap)
574{
575
576 // extract DCS pressure maps. Perform fits to save space
577
578 UInt_t result=0;
579 TMap *map = fPressure->ExtractDCS(dcsAliasMap);
580 if (map) {
581 fPressure->MakeSplineFit(map);
582 Double_t fitFraction = 1.0*fPressure->NumFits()/fPressure->NumSensors();
583 if (fitFraction > kFitFraction ) {
1a63b1b0 584 AliInfo(Form("Pressure values extracted, fits performed.\n"));
09a746c5 585 } else {
586 Log ("Too few pressure maps fitted. \n");
587 result = 9;
588 }
589 } else {
590 Log("No pressure map extracted. \n");
591 result=9;
592 }
593 delete map;
594 return result;
595}
7b54c8e9 596
bdffc5fb 597//______________________________________________________________________________________________
598UInt_t AliTPCPreprocessor::MapHighVoltage(TMap* dcsAliasMap)
599{
600
601 // extract DCS HV maps. Perform fits to save space
602
603 UInt_t result=0;
604 TMap *map = fHighVoltage->ExtractDCS(dcsAliasMap);
605 if (map) {
379fc89a 606 fHighVoltage->ClearFit();
2b00f997 607 fHighVoltage->RemoveGraphDuplicates(kHighVoltageDifference);
608 // don't keep new point if too similar to previous one
379fc89a 609 fHighVoltage->SetGraph(map);
bdffc5fb 610 } else {
611 Log("No high voltage recordings extracted. \n");
612 result=9;
613 }
614 delete map;
9d2ce539 615
bff20895 616 TString hvStatConf = fConfEnv->GetValue("HighVoltageStat","ON");
617 hvStatConf.ToUpper();
618 if (hvStatConf != "OFF" ) {
619 TMap *map2 = fHighVoltageStat->ExtractDCS(dcsAliasMap);
620 if (map2) {
dca91b3f 621 fHighVoltageStat->ClearFit();
622 fHighVoltageStat->SetGraph(map2);
bff20895 623 } else {
624 Log("No high voltage status recordings extracted. \n");
625 result=9;
626 }
627 delete map2;
9d2ce539 628
bff20895 629 // add status maps to high voltage sensor array
9d2ce539 630
bff20895 631 fHighVoltage->AddSensors(fHighVoltageStat);
632 }
bdffc5fb 633 // Now store the final CDB file
634
635 if ( result == 0 ) {
636 AliCDBMetaData metaData;
637 metaData.SetBeamPeriod(0);
638 metaData.SetResponsible("Haavard Helstrup");
0492edf5 639 metaData.SetAliRootVersion(ALIROOT_BRANCH);
bdffc5fb 640 metaData.SetComment("Preprocessor AliTPC data base entries.");
641
642 Bool_t storeOK = Store("Calib", "HighVoltage", fHighVoltage, &metaData, 0, kFALSE);
643 if ( !storeOK ) result=1;
644
645 }
646
647 return result;
648
649}
650
b6e9fd45 651//______________________________________________________________________________________________
652UInt_t AliTPCPreprocessor::MapGoofie(TMap* dcsAliasMap)
653{
654
655 // extract DCS Goofie maps. Do not perform fits (low update rate)
656
657 UInt_t result=0;
658
659 TMap *map = fGoofie->ExtractDCS(dcsAliasMap);
660 if (map) {
661 fGoofie->ClearFit();
662 fGoofie->SetGraph(map);
663 } else {
664 Log("No Goofie recordings extracted. \n");
665 result=9;
666 }
667 delete map;
668
669 // Now store the final CDB file
670
671 if ( result == 0 ) {
672 AliCDBMetaData metaData;
673 metaData.SetBeamPeriod(0);
674 metaData.SetResponsible("Haavard Helstrup");
0492edf5 675 metaData.SetAliRootVersion(ALIROOT_BRANCH);
b6e9fd45 676 metaData.SetComment("Preprocessor AliTPC data base entries.");
677
678 Bool_t storeOK = Store("Calib", "Goofie", fGoofie, &metaData, 0, kFALSE);
679 if ( !storeOK ) result=1;
680
681 }
682
683 return result;
684
685}
686
41c979ea 687//______________________________________________________________________________________________
688UInt_t AliTPCPreprocessor::MapGasComposition(TMap* dcsAliasMap)
689{
690
691 // extract DCS HV maps. Perform fits to save space
692
693 UInt_t result=0;
694 TMap *map = fGasComposition->ExtractDCS(dcsAliasMap);
695 if (map) {
33f6bae5 696 fGasComposition->ClearFit();
697 fGasComposition->RemoveGraphDuplicates(kGasCompositionDifference);
41c979ea 698 // don't keep new point if too similar to previous one
33f6bae5 699 fGasComposition->SetGraph(map);
41c979ea 700 } else {
701 Log("No gas composition recordings extracted. \n");
702 result=9;
703 }
704 delete map;
705
706 // Now store the final CDB file
707
708 if ( result == 0 ) {
709 AliCDBMetaData metaData;
710 metaData.SetBeamPeriod(0);
711 metaData.SetResponsible("Haavard Helstrup");
712 metaData.SetAliRootVersion(ALIROOT_BRANCH);
713 metaData.SetComment("Preprocessor AliTPC data base entries.");
714
715 Bool_t storeOK = Store("Calib", "GasComposition", fGasComposition, &metaData, 0, kFALSE);
716 if ( !storeOK ) result=1;
717
718 }
719
720 return result;
721
722}
723
7b54c8e9 724
a7dce0bc 725//______________________________________________________________________________________________
7b54c8e9 726
727UInt_t AliTPCPreprocessor::ExtractPedestals(Int_t sourceFXS)
a7dce0bc 728{
729 //
730 // Read pedestal file from file exchage server
731 // Keep original entry from OCDB in case no new pedestals are available
732 //
ccf58a39 733 AliTPCCalPad *calPadPedOCDB=0;
a7dce0bc 734 AliCDBEntry* entry = GetFromOCDB("Calib", "Pedestals");
ccf58a39 735 if (entry) calPadPedOCDB = (AliTPCCalPad*)entry->GetObject();
736 if ( calPadPedOCDB==NULL ) {
a7dce0bc 737 Log("AliTPCPreprocsessor: No previous TPC pedestal entry available.\n");
7b54c8e9 738 }
739
ccf58a39 740 AliTPCCalPad *calPadRMSOCDB=0;
d63b9ad7 741 entry = GetFromOCDB("Calib", "PadNoise");
ccf58a39 742 if (entry) calPadRMSOCDB = (AliTPCCalPad*)entry->GetObject();
743 if ( calPadRMSOCDB==NULL ) {
7b54c8e9 744 Log("AliTPCPreprocsessor: No previous TPC noise entry available.\n");
a7dce0bc 745 }
746
ccf58a39 747 AliTPCCalPad* calPadPed = new AliTPCCalPad("PedestalsMean","PedestalsMean");
748 AliTPCCalPad* calPadRMS = new AliTPCCalPad("PedestalsRMS","PedestalsRMS");
749
7b54c8e9 750
a7dce0bc 751 UInt_t result=0;
752
753 Int_t nSectors = fROC->GetNSectors();
ccf58a39 754 TVectorD foundSectorsPed(nSectors);
755 foundSectorsPed=0;
756 TVectorD foundSectorsRMS(nSectors);
757 foundSectorsRMS=0;
758
7b54c8e9 759 TList* list = GetFileSources(sourceFXS,"pedestals");
9f016d99 760
761 if (list && list->GetEntries()>0) {
a7dce0bc 762
763// loop through all files from LDCs
764
bdffc5fb 765 Bool_t changed=false;
a7dce0bc 766 UInt_t index = 0;
767 while (list->At(index)!=NULL) {
768 TObjString* fileNameEntry = (TObjString*) list->At(index);
769 if (fileNameEntry!=NULL) {
7b54c8e9 770 TString fileName = GetFile(sourceFXS, "pedestals",
a7dce0bc 771 fileNameEntry->GetString().Data());
772 TFile *f = TFile::Open(fileName);
9f016d99 773 if (!f) {
774 Log ("Error opening pedestal file.");
775 result =2;
776 break;
777 }
a7dce0bc 778 AliTPCCalibPedestal *calPed;
e73181c9 779 f->GetObject("tpcCalibPedestal",calPed);
67a165ed 780 if ( !calPed ) {
781 Log ("No pedestal calibration object in file.");
782 result = 2;
783 break;
784 }
a7dce0bc 785
786 // replace entries for the sectors available in the present file
787
bdffc5fb 788 changed=true;
c9c23d80 789 for (Int_t sector=0; sector<nSectors; sector++) {
7b54c8e9 790 AliTPCCalROC *rocPed=calPed->GetCalRocPedestal(sector, kFALSE);
ccf58a39 791 if ( rocPed ) {
792 AliTPCCalROC* roc=calPadPed->GetCalROC(sector);
793 roc->Add(rocPed,1);
794 foundSectorsPed[sector]++;
795 }
7b54c8e9 796 AliTPCCalROC *rocRMS=calPed->GetCalRocRMS(sector, kFALSE);
ccf58a39 797 if ( rocRMS ) {
798 AliTPCCalROC* roc=calPadRMS->GetCalROC(sector);
799 roc->Add(rocRMS,1);
800 foundSectorsRMS[sector]++;
801 }
a7dce0bc 802 }
a480de15 803 delete calPed;
342d3b42 804 f->Close();
a7dce0bc 805 }
806 ++index;
807 } // while(list)
ccf58a39 808
809//
810// Check if calibration is complete -- otherwise take from old OCDB entry
811
812// inner sectors
813 for (Int_t sector=0; sector<nSectors/2; sector++) {
814 if (foundSectorsPed[sector] < 1 ) {
f3652e39 815 if (calPadPedOCDB) {
816 AliTPCCalROC *rocOCDB=calPadPedOCDB->GetCalROC(sector);
817 calPadPed->SetCalROC(rocOCDB,sector);
818 } else {
819 const int mess_length=100;
820 char message[mess_length];
821 snprintf(message,mess_length,"Missing pedestals for sector %d - also not available from previous OCDB entry.\n",
822 sector);
823 Log (message);
824 result = 2;
825 }
ccf58a39 826 }
827 if (foundSectorsRMS[sector] < 1 ) {
f3652e39 828 if (calPadRMSOCDB) {
829 AliTPCCalROC *rocOCDB=calPadRMSOCDB->GetCalROC(sector);
830 calPadRMS->SetCalROC(rocOCDB,sector);
831 } else {
832 const int mess_length=100;
833 char message[mess_length];
834 snprintf(message,mess_length,"Missing pedestal RMS for sector %d - also not available from previous OCDB entry.\n",
835 sector);
836 Log (message);
837 result = 2;
838 }
ccf58a39 839 }
840 }
f3652e39 841
ccf58a39 842// outer sectors -- two updates needed
f3652e39 843
ccf58a39 844 for (Int_t sector=nSectors/2; sector<nSectors; sector++) {
845 if (foundSectorsPed[sector] < 2 ) {
f3652e39 846 if (calPadPedOCDB) {
847 AliTPCCalROC *rocOCDB=calPadPedOCDB->GetCalROC(sector);
848 calPadPed->SetCalROC(rocOCDB,sector);
849 } else {
850 const int mess_length=100;
851 char message[mess_length];
852 snprintf(message,mess_length,"Missing pedestals for sector %d - also not available from previous OCDB entry.\n",
853 sector);
854 Log (message);
855 result = 2;
856 }
857
ccf58a39 858 }
859 if (foundSectorsRMS[sector] < 2 ) {
f3652e39 860 if (calPadRMSOCDB) {
861 AliTPCCalROC *rocOCDB=calPadRMSOCDB->GetCalROC(sector);
862 calPadRMS->SetCalROC(rocOCDB,sector);
863 } else {
864 const int mess_length=100;
865 char message[mess_length];
866 snprintf(message,mess_length,"Missing pedestal RMS for sector %d - also not available from previous OCDB entry.\n",
867 sector);
868 Log (message);
869 result = 2;
870 }
871
ccf58a39 872 }
873 }
874
875
a7dce0bc 876//
877// Store updated pedestal entry to OCDB
878//
bdffc5fb 879 if (changed) {
880 AliCDBMetaData metaData;
881 metaData.SetBeamPeriod(0);
882 metaData.SetResponsible("Haavard Helstrup");
0492edf5 883 metaData.SetAliRootVersion(ALIROOT_BRANCH);
bdffc5fb 884 metaData.SetComment("Preprocessor AliTPC data base entries.");
885
886 Bool_t storeOK = Store("Calib", "Pedestals", calPadPed, &metaData, 0, kTRUE);
887 if ( !storeOK ) ++result;
888 storeOK = Store("Calib", "PadNoise", calPadRMS, &metaData, 0, kTRUE);
889 if ( !storeOK ) ++result;
890 }
9f016d99 891 } else {
cf4216a3 892 Log ("Error: no entries in pedestal file list!");
9f016d99 893 result = 1;
7b54c8e9 894 }
a7dce0bc 895
795dbd3b 896 delete calPadPed;
897 delete calPadRMS;
ccf58a39 898 delete calPadPedOCDB;
899 delete calPadRMSOCDB;
795dbd3b 900
a7dce0bc 901 return result;
902}
7b54c8e9 903
904//______________________________________________________________________________________________
905
906
9f016d99 907UInt_t AliTPCPreprocessor::ExtractPulser(Int_t sourceFXS)
908{
909 //
910 // Read pulser calibration file from file exchage server
911 // Keep original entry from OCDB in case no new pulser calibration is available
912 //
ccf58a39 913
914 TObjArray *pulserObjects = new TObjArray;
915 TObjArray *pulserObjectsOCDB=0;
916
9f016d99 917 AliCDBEntry* entry = GetFromOCDB("Calib", "Pulser");
ccf58a39 918 if (entry) pulserObjectsOCDB = (TObjArray*)entry->GetObject();
919 if ( pulserObjectsOCDB==NULL ) {
9f016d99 920 Log("AliTPCPreprocsessor: No previous TPC pulser entry available.\n");
9f016d99 921 }
922
ccf58a39 923 AliTPCCalPad *pulserTmean = new AliTPCCalPad("PulserTmean","PulserTmean");
924 pulserObjects->Add(pulserTmean);
925
926 AliTPCCalPad *pulserTrms = new AliTPCCalPad("PulserTrms","PulserTrms");
927 pulserObjects->Add(pulserTrms);
928
929 AliTPCCalPad *pulserQmean = new AliTPCCalPad("PulserQmean","PulserQmean");
930 pulserObjects->Add(pulserQmean);
931
9f016d99 932
933
934 UInt_t result=0;
935
936 Int_t nSectors = fROC->GetNSectors();
ccf58a39 937 TVectorD foundTmean(nSectors);
938 foundTmean=0;
939 TVectorD foundTrms(nSectors);
940 foundTrms=0;
941 TVectorD foundQmean(nSectors);
942 foundQmean=0;
943
944
9f016d99 945 TList* list = GetFileSources(sourceFXS,"pulser");
946
947 if (list && list->GetEntries()>0) {
948
949// loop through all files from LDCs
950
bdffc5fb 951 Bool_t changed=false;
9f016d99 952 UInt_t index = 0;
953 while (list->At(index)!=NULL) {
954 TObjString* fileNameEntry = (TObjString*) list->At(index);
955 if (fileNameEntry!=NULL) {
956 TString fileName = GetFile(sourceFXS, "pulser",
957 fileNameEntry->GetString().Data());
958 TFile *f = TFile::Open(fileName);
959 if (!f) {
960 Log ("Error opening pulser file.");
961 result =2;
962 break;
963 }
964 AliTPCCalibPulser *calPulser;
e73181c9 965 f->GetObject("tpcCalibPulser",calPulser);
67a165ed 966 if ( !calPulser ) {
967 Log ("No pulser calibration object in file.");
968 result = 2;
969 break;
970 }
9f016d99 971
972 // replace entries for the sectors available in the present file
973
bdffc5fb 974 changed=true;
9f016d99 975 for (Int_t sector=0; sector<nSectors; sector++) {
976 AliTPCCalROC *rocTmean=calPulser->GetCalRocT0(sector);
ccf58a39 977 if ( rocTmean ) {
978 AliTPCCalROC* roc=pulserTmean->GetCalROC(sector);
979 roc->Add(rocTmean,1);
980 foundTmean[sector]++;
981 }
9f016d99 982 AliTPCCalROC *rocTrms=calPulser->GetCalRocRMS(sector);
ccf58a39 983 if ( rocTrms ) {
984 AliTPCCalROC* roc=pulserTrms->GetCalROC(sector);
985 roc->Add(rocTrms,1);
986 foundTrms[sector]++;
987 }
9f016d99 988 AliTPCCalROC *rocQmean=calPulser->GetCalRocQ(sector);
ccf58a39 989 if ( rocQmean ) {
990 AliTPCCalROC* roc=pulserQmean->GetCalROC(sector);
991 roc->Add(rocQmean,1);
992 foundQmean[sector]++;
993 }
9f016d99 994 }
a480de15 995 delete calPulser;
342d3b42 996 f->Close();
9f016d99 997 }
998 ++index;
999 } // while(list)
ccf58a39 1000
1001
1002
1003
1004if (pulserObjectsOCDB) {
1005 AliTPCCalPad* pulserTmeanOCDB = (AliTPCCalPad*)pulserObjectsOCDB->FindObject("PulserTmean");
1006 AliTPCCalPad* pulserTrmsOCDB = (AliTPCCalPad*)pulserObjectsOCDB->FindObject("PulserTrms");
1007 AliTPCCalPad* pulserQmeanOCDB = (AliTPCCalPad*)pulserObjectsOCDB->FindObject("PulserQmean");
1008
1009//
1010// Check if calibration is complete -- otherwise take from old OCDB entry
1011
1012// inner sectors
1013 for (Int_t sector=0; sector<nSectors/2; sector++) {
1014 if (foundTmean[sector] < 1 ) {
1015 if (pulserTmeanOCDB) {
1016 AliTPCCalROC* rocOCDB = pulserTmeanOCDB->GetCalROC(sector);
1017 if ( rocOCDB ) pulserTmean->SetCalROC(rocOCDB,sector);
1018 }
1019 }
1020 if (foundTrms[sector] < 1 ) {
1021 if (pulserTrmsOCDB) {
1022 AliTPCCalROC* rocOCDB = pulserTrmsOCDB->GetCalROC(sector);
1023 if ( rocOCDB ) pulserTrms->SetCalROC(rocOCDB,sector);
1024 }
1025 }
1026 if (foundQmean[sector] < 1 ) {
1027 if (pulserQmeanOCDB) {
1028 AliTPCCalROC* rocOCDB = pulserQmeanOCDB->GetCalROC(sector);
1029 if ( rocOCDB ) pulserQmean->SetCalROC(rocOCDB,sector);
1030 }
1031 }
1032 }
1033
1034// outer sectors -- two updates needed
1035
1036 for (Int_t sector=0; sector<nSectors/2; sector++) {
1037 if (foundTmean[sector] < 2 ) {
1038 if (pulserTmeanOCDB) {
1039 AliTPCCalROC* rocOCDB = pulserTmeanOCDB->GetCalROC(sector);
1040 if ( rocOCDB ) pulserTmean->SetCalROC(rocOCDB,sector);
1041 }
1042 }
1043 if (foundTrms[sector] < 2 ) {
1044 if (pulserTrmsOCDB) {
1045 AliTPCCalROC* rocOCDB = pulserTrmsOCDB->GetCalROC(sector);
1046 if ( rocOCDB ) pulserTrms->SetCalROC(rocOCDB,sector);
1047 }
1048 }
1049 if (foundQmean[sector] < 2 ) {
1050 if (pulserQmeanOCDB) {
1051 AliTPCCalROC* rocOCDB = pulserQmeanOCDB->GetCalROC(sector);
1052 if ( rocOCDB ) pulserQmean->SetCalROC(rocOCDB,sector);
1053 }
1054 }
1055
1056 }
1057}
1058
9f016d99 1059//
1060// Store updated pedestal entry to OCDB
1061//
bdffc5fb 1062 if (changed) {
1063 AliCDBMetaData metaData;
1064 metaData.SetBeamPeriod(0);
1065 metaData.SetResponsible("Haavard Helstrup");
0492edf5 1066 metaData.SetAliRootVersion(ALIROOT_BRANCH);
bdffc5fb 1067 metaData.SetComment("Preprocessor AliTPC data base entries.");
1068
1069 Bool_t storeOK = Store("Calib", "Pulser", pulserObjects, &metaData, 0, kTRUE);
1070 if ( !storeOK ) ++result;
1071 }
9f016d99 1072 } else {
cf4216a3 1073 Log ("Error: no entries in pulser file list!");
9f016d99 1074 result = 1;
1075 }
795dbd3b 1076 pulserObjects->Delete();
1077 delete pulserObjects;
f3652e39 1078 if (pulserObjectsOCDB) pulserObjectsOCDB->Delete();
ccf58a39 1079 delete pulserObjectsOCDB;
9f016d99 1080
1081 return result;
1082}
1083
70f224dd 1084//______________________________________________________________________________________________
1085
1086
1087UInt_t AliTPCPreprocessor::ExtractRaw(Int_t sourceFXS)
1088{
1089 //
1090 // Read Raw calibration file from file exchage server
1091 //
1092
1093 UInt_t result=0;
90581ff1 1094 TObjArray* rawArray = new TObjArray;
70f224dd 1095
9b1478f9 1096 TList* list = GetFileSources(sourceFXS,"tpcCalibRaw");
70f224dd 1097
1098 if (list && list->GetEntries()>0) {
1099
1100// loop through all files
1101
1102 UInt_t index = 0;
1103 while (list->At(index)!=NULL) {
1104 TObjString* fileNameEntry = (TObjString*) list->At(index);
1105 if (fileNameEntry!=NULL) {
1106 TString fileName = GetFile(sourceFXS, "tpcCalibRaw",
1107 fileNameEntry->GetString().Data());
1108 TFile *f = TFile::Open(fileName);
1109 if (!f) {
1110 Log ("Error opening raw file.");
1111 result =2;
1112 break;
1113 }
90581ff1 1114 AliTPCCalibRaw *calRaw;
70f224dd 1115 f->GetObject("tpcCalibRaw",calRaw);
1116 if ( !calRaw ) {
1117 Log ("No raw calibration object in file.");
1118 result = 2;
1119 break;
1120 }
90581ff1 1121 rawArray->Add(calRaw);
70f224dd 1122 f->Close();
1123 }
1124 ++index;
1125 } // while(list)
1126//
1127// Store updated pedestal entry to OCDB
1128//
1129 AliCDBMetaData metaData;
1130 metaData.SetBeamPeriod(0);
1131 metaData.SetResponsible("Haavard Helstrup");
0492edf5 1132 metaData.SetAliRootVersion(ALIROOT_BRANCH);
70f224dd 1133 metaData.SetComment("Preprocessor AliTPC data base entries.");
1134
90581ff1 1135 Bool_t storeOK = Store("Calib", "Raw", rawArray, &metaData, 0, kTRUE);
70f224dd 1136 if ( !storeOK ) ++result;
1137 } else {
cf4216a3 1138 Log ("Error: no entries in raw file list!");
70f224dd 1139 result = 1;
1140 }
795dbd3b 1141
1142 rawArray->Delete();
1143 delete rawArray;
70f224dd 1144
1145 return result;
1146}
1147//______________________________________________________________________________________________
1148
9f016d99 1149UInt_t AliTPCPreprocessor::ExtractCE(Int_t sourceFXS)
1150{
1151 //
1152 // Read Central Electrode file from file exchage server
9f016d99 1153 //
e2d642a2 1154 //
1155 AliTPCCalPad *ceTmean=0;
1156 AliTPCCalPad *ceTrms=0;
1157 AliTPCCalPad *ceQmean=0;
1158 TObjArray *rocTtime=0;
1159 TObjArray *rocQtime=0;
1160
1161 TObjArray *ceObjects= new TObjArray;
1162
1163
1164 Int_t nSectors = fROC->GetNSectors();
1165
1166 ceTmean = new AliTPCCalPad("CETmean","CETmean");
1167 ceObjects->Add(ceTmean);
1168
1169 ceTrms = new AliTPCCalPad("CETrms","CETrms");
1170 ceObjects->Add(ceTrms);
1171
1172 ceQmean = new AliTPCCalPad("CEQmean","CEQmean");
1173 ceObjects->Add(ceQmean);
1174
1175 rocTtime = new TObjArray(nSectors+2); // also make room for A and C side average
1176 rocTtime->SetName("rocTtime");
1177 ceObjects->Add(rocTtime);
1178
1179 rocQtime = new TObjArray(nSectors);
1180 rocQtime->SetName("rocQtime");
1181 ceObjects->Add(rocQtime);
1182
1183 //=== new part
1184 TObjArray *arrFitGraphs=new TObjArray;
1185 arrFitGraphs->SetName("ceFitsDrift");
1186 ceObjects->Add(arrFitGraphs);
70f224dd 1187
09a746c5 1188// Temperature maps
e2d642a2 1189
1190 if (fTemp) {
df8595b9 1191 AliTPCSensorTempArray *tempMap = new AliTPCSensorTempArray(*fTemp);
1192 tempMap->SetNameTitle("TempMap","TempMap");
1193 ceObjects->Add(tempMap);
e2d642a2 1194 }
1195
09a746c5 1196// Pressure maps
e2d642a2 1197
1198 if (fPressure) {
1199 AliDCSSensor *sensor=0, *sensorCopy=0;
1200 for (Int_t isensor=0; isensor<kNumPressureSensors; ++isensor ) {
09a746c5 1201 sensor = fPressure->GetSensor(kPressureSensorNames[isensor]);
b5886f0f 1202 if (sensor) {
e2d642a2 1203 sensorCopy = new AliDCSSensor(*sensor);
1204 sensorCopy->SetNameTitle(kPressureSensorNames[isensor],kPressureSensorNames[isensor]);
1205 ceObjects->Add(sensorCopy);
b5886f0f 1206 }
e2d642a2 1207 }
1208 }
1209
1210 UInt_t result=0;
1211
1212 TList* list = GetFileSources(sourceFXS,"CE");
1213
1214 if (list && list->GetEntries()>0) {
1215
9f016d99 1216// loop through all files from LDCs
e2d642a2 1217
9f016d99 1218 UInt_t index = 0;
1219 while (list->At(index)!=NULL) {
e2d642a2 1220 TObjString* fileNameEntry = (TObjString*) list->At(index);
1221 if (fileNameEntry!=NULL) {
9f016d99 1222 TString fileName = GetFile(sourceFXS, "CE",
e2d642a2 1223 fileNameEntry->GetString().Data());
6d3584e9 1224 AliTPCCalibCE *calCE=AliTPCCalibCE::ReadFromFile(fileName.Data());
e2d642a2 1225
7c2575c4 1226 if (!calCE) {
e2d642a2 1227 Log ("No valid calibCE object.");
1228 result=2;
1229 break;
1230 }
9f016d99 1231 // replace entries for the sectors available in the present file
e2d642a2 1232
9f016d99 1233 for (Int_t sector=0; sector<nSectors; sector++) {
e2d642a2 1234 AliTPCCalROC *rocTmean=calCE->GetCalRocT0(sector);
1235 if ( rocTmean ) ceTmean->SetCalROC(rocTmean,sector);
1236 AliTPCCalROC *rocTrms=calCE->GetCalRocRMS(sector);
1237 if ( rocTrms ) ceTrms->SetCalROC(rocTrms,sector);
1238 AliTPCCalROC *rocQmean=calCE->GetCalRocQ(sector);
1239 if ( rocQmean ) ceQmean->SetCalROC(rocQmean,sector);
1240 TGraph *grT=calCE->MakeGraphTimeCE(sector,0,2); // T time graph
1241 if ( grT ) rocTtime->AddAt(grT,sector);
1242 TGraph *grQ=calCE->MakeGraphTimeCE(sector,0,3); // Q time graph
1243 if ( grQ ) rocQtime->AddAt(grQ,sector);
9f016d99 1244 }
e2d642a2 1245
1246 TGraph *grT=calCE->MakeGraphTimeCE(-1,0,2); // A side average
1247 if ( grT ) {
1248 rocTtime->AddAt(grT,nSectors);
1249 } else {
31c50f68 1250 result=10;
e2d642a2 1251 }
1252 grT=calCE->MakeGraphTimeCE(-2,0,2); // C side average
1253 if ( grT ) {
1254 rocTtime->AddAt(grT,nSectors+1);
1255 } else {
31c50f68 1256 result=10;
e2d642a2 1257 }
1fc96a8a 1258
e2d642a2 1259 delete calCE;
9f016d99 1260 }
e2d642a2 1261 ++index;
9f016d99 1262 } // while(list)
1fc96a8a 1263//
1264// Check number of calibrated sectors per side
1265//
1266 Int_t aside=0, cside=0;
1267 for (Int_t ind=0; ind<nSectors/4; ind++ ) {
1268 TGraph *grT=(TGraph*)rocTtime->At(ind);
1269 if (grT) aside++;
1270 grT=(TGraph*)rocTtime->At(ind+nSectors/2);
1271 if (grT) aside++;
1272 grT=(TGraph*)rocTtime->At(ind+nSectors/4);
1273 if (grT) cside++;
1274 grT=(TGraph*)rocTtime->At(ind+3*nSectors/4);
1275 if (grT) cside++;
1276 }
f085dc93 1277 if ( (aside<kMinCESectors) && (cside<kMinCESectors) ) {
1278 Log (Form("ExtractCE: Too few fitted sectors: Aside =%d, Cside=%d\n",
1279 aside, cside)) ;
1280 result=10;
1281 }
e2d642a2 1282
1283 //
1284 //=== New CE part
1285 // if it is validated this part needs to be modified again
1286 // currently its only processed if there is a valid standard CE object
1287 //
1288 list = GetFileSources(sourceFXS,"CEnew");
1289
1290 if (result==0 && list && list->GetEntries()>0) {
1291
1292// loop through all files from LDCs
1293
1294 UInt_t index2 = 0;
1295 while (list->At(index2)!=NULL) {
1296 TObjString* fileNameEntry = (TObjString*) list->At(index2);
1297 if (fileNameEntry!=NULL) {
1298 TString fileName = GetFile(sourceFXS, "CEnew",
1299 fileNameEntry->GetString().Data());
82bf5037 1300 AliTPCCalibCE *calCE=AliTPCCalibCE::ReadFromFile(fileName.Data());
e2d642a2 1301
1302 if (!calCE) {
1303 Log ("No valid new calibCE object.");
1304// result=2;
1305 break;
1306 }
1307
1308 TIter nextObj(calCE->GetArrFitGraphs());
1309 TObject *obj=0x0;
1310 while ( (obj=nextObj()) ){
1311 arrFitGraphs->Add(obj->Clone());
1312 }
1313 delete calCE;
e2d642a2 1314 }
1315 ++index2;
1316 }
1317 }
1318
9f016d99 1319//
1320// Store updated pedestal entry to OCDB
1321//
1322 AliCDBMetaData metaData;
1323 metaData.SetBeamPeriod(0);
1324 metaData.SetResponsible("Haavard Helstrup");
0492edf5 1325 metaData.SetAliRootVersion(ALIROOT_BRANCH);
9f016d99 1326 metaData.SetComment("Preprocessor AliTPC data base entries.");
e2d642a2 1327
31c50f68 1328 if ( result == 0 ) {
e2d642a2 1329 Bool_t storeOK = Store("Calib", "CE", ceObjects, &metaData, 0, kTRUE);
1330 if ( !storeOK ) ++result;
31c50f68 1331 } else {
e2d642a2 1332 Log ("Warning: Average time graphs not available - no OCDB entry written");
1333 }
9f016d99 1334 } else {
cf4216a3 1335 Log ("Error: no CE entries available from FXS!");
9f016d99 1336 result = 1;
1337 }
e2d642a2 1338
795dbd3b 1339 ceObjects->Delete();
1340 delete ceObjects;
1341
9f016d99 1342 return result;
1343}
dca91b3f 1344//______________________________________________________________________________________________
1345
1346UInt_t AliTPCPreprocessor::ExtractQA(Int_t sourceFXS)
1347{
1348 //
1349 // Read Quality Assurance file from file exchage server
1350 //
1351
1352 UInt_t result=0;
1353
1354 TList* list = GetFileSources(sourceFXS,"QA");
1355
1356 if (list && list->GetEntries()>0) {
1357
ccf58a39 1358// only one QA object should be available!
dca91b3f 1359
1360 AliTPCdataQA *calQA;
1361
1362 UInt_t nentries = list->GetEntries();
1363 UInt_t index=0;
1364 if ( nentries > 1) Log ( "More than one QA entry. First one processed");
1365 TObjString* fileNameEntry = (TObjString*) list->At(index);
1366 if (fileNameEntry!=NULL) {
1367 TString fileName = GetFile(sourceFXS, "QA",
1368 fileNameEntry->GetString().Data());
1369 TFile *f = TFile::Open(fileName);
1370 if (!f) {
1371 Log ("Error opening QA file.");
a2465b54 1372 result =2;
1373 } else {
1374 f->GetObject("tpcCalibQA",calQA);
7c2575c4 1375 if ( calQA ) {
dca91b3f 1376//
1377// Store updated pedestal entry to OCDB
1378//
7c2575c4 1379 AliCDBMetaData metaData;
1380 metaData.SetBeamPeriod(0);
1381 metaData.SetResponsible("Haavard Helstrup");
0492edf5 1382 metaData.SetAliRootVersion(ALIROOT_BRANCH);
7c2575c4 1383 metaData.SetComment("Preprocessor AliTPC data base entries.");
1384
cf4216a3 1385 Bool_t storeOK = Store("Calib", "QA", calQA, &metaData, 0, kFALSE);
7c2575c4 1386 if ( !storeOK ) ++result;
795dbd3b 1387
1388 delete calQA;
7c2575c4 1389 }
a2465b54 1390 }
1391 } else {
1392 Log ("Error: no QA files on FXS!");
1393 result = 2;
1394 }
dca91b3f 1395 } else {
a2465b54 1396 Log ("Error: no QA entries in FXS list!");
dca91b3f 1397 result = 1;
1398 }
dca91b3f 1399 return result;
1400}
1401
9054511b 1402//______________________________________________________________________________________________
1403
1404
f6b5fa33 1405UInt_t AliTPCPreprocessor::ExtractAltro(Int_t sourceFXS, TMap* dcsMap)
9054511b 1406{
1407 //
f6b5fa33 1408 // Read Altro configuration file from file exchage server
9054511b 1409 // Keep original entry from OCDB in case no new pulser calibration is available
1410 //
1411 TObjArray *altroObjects=0;
1412 AliTPCCalPad *acqStart=0;
1413 AliTPCCalPad *zsThr=0;
1414 AliTPCCalPad *acqStop=0;
1415 AliTPCCalPad *FPED=0;
1416 AliTPCCalPad *masked=0;
cf4216a3 1417 AliTPCCalPad *k1=0, *k2=0, *k3=0;
1418 AliTPCCalPad *l1=0, *l2=0, *l3=0;
1419 TMap *mapRCUconfig=0;
9054511b 1420
14ae505e 1421 AliCDBEntry* entry = GetFromOCDB("Calib", "AltroConfig");
9054511b 1422 if (entry) altroObjects = (TObjArray*)entry->GetObject();
1423 if ( altroObjects==NULL ) {
1424 Log("AliTPCPreprocsessor: No previous TPC altro calibration entry available.\n");
1425 altroObjects = new TObjArray;
1426 }
1427
1428 acqStart = (AliTPCCalPad*)altroObjects->FindObject("AcqStart");
1429 if ( !acqStart ) {
1430 acqStart = new AliTPCCalPad("AcqStart","AcqStart");
1431 altroObjects->Add(acqStart);
1432 }
1433 zsThr = (AliTPCCalPad*)altroObjects->FindObject("ZsThr");
1434 if ( !zsThr ) {
1435 zsThr = new AliTPCCalPad("ZsThr","ZsThr");
1436 altroObjects->Add(zsThr);
1437 }
1438 FPED = (AliTPCCalPad*)altroObjects->FindObject("FPED");
1439 if ( !FPED ) {
1440 FPED = new AliTPCCalPad("FPED","FPED");
1441 altroObjects->Add(FPED);
1442 }
1443 acqStop = (AliTPCCalPad*)altroObjects->FindObject("AcqStop");
1444 if ( !acqStop ) {
1445 acqStop = new AliTPCCalPad("AcqStop","AcqStop");
1446 altroObjects->Add(acqStop);
1447 }
1448 masked = (AliTPCCalPad*)altroObjects->FindObject("Masked");
1449 if ( !masked ) {
1450 masked = new AliTPCCalPad("Masked","Masked");
1451 altroObjects->Add(masked);
1452 }
cf4216a3 1453 k1 = (AliTPCCalPad*)altroObjects->FindObject("K1");
1454 if ( !k1 ) {
1455 k1 = new AliTPCCalPad("K1","K1");
1456 altroObjects->Add(k1);
1457 }
1458 k2 = (AliTPCCalPad*)altroObjects->FindObject("K2");
1459 if ( !k2 ) {
1460 k2 = new AliTPCCalPad("K2","K2");
1461 altroObjects->Add(k2);
1462 }
1463 k3 = (AliTPCCalPad*)altroObjects->FindObject("K3");
1464 if ( !k3 ) {
1465 k3 = new AliTPCCalPad("K3","K3");
1466 altroObjects->Add(k3);
1467 }
1468 l1 = (AliTPCCalPad*)altroObjects->FindObject("L1");
1469 if ( !l1 ) {
1470 l1 = new AliTPCCalPad("L1","L1");
1471 altroObjects->Add(l1);
1472 }
1473 l2 = (AliTPCCalPad*)altroObjects->FindObject("L2");
1474 if ( !l2 ) {
1475 l2 = new AliTPCCalPad("L2","L2");
1476 altroObjects->Add(l2);
1477 }
1478 l3 = (AliTPCCalPad*)altroObjects->FindObject("L3");
1479 if ( !l3 ) {
1480 l3 = new AliTPCCalPad("L3","L3");
1481 altroObjects->Add(l3);
1482 }
1483 mapRCUconfig = (TMap*)altroObjects->FindObject("RCUconfig");
1484 if (!mapRCUconfig) {
1485 mapRCUconfig = new TMap();
1486 mapRCUconfig->SetName("RCUconfig");
1487 altroObjects->Add(mapRCUconfig);
1488 }
9054511b 1489
1490
1491 UInt_t result=0;
1492 TString idFXS[2]={"AltroConfigA","AltroConfigC"};
1493
1494 Int_t nSectors = fROC->GetNSectors();
1495 Bool_t changed=false;
f6b5fa33 1496 if (altroObjects == 0 ) altroObjects = new TObjArray;
1497
1498// extract list of active DDLs
1499
f3652e39 1500 if (dcsMap) {
f6b5fa33 1501 Bool_t found;
1502 TString arrDDL(kNumDDL);
2b00f997 1503 arrDDL.Append('x',kNumDDL);
f6b5fa33 1504 for ( Int_t iDDL = 0; iDDL<kNumDDL; iDDL++ ) {
1505 TString stringID = Form (kAmandaDDL.Data(),iDDL+kFirstDDL);
1506 TPair *pair = (TPair*)dcsMap->FindObject(stringID.Data());
1507 found = false;
1508 if ( pair ) {
1509 TObjArray *valueSet=(TObjArray*)pair->Value();
1510 if ( valueSet) {
1511 AliDCSValue *val = (AliDCSValue*)valueSet->At(0);
2b00f997 1512 if (val) {
1513 found = val->GetBool();
1514 if (found){
1515 arrDDL[iDDL] = '1';
1516 } else {
1517 arrDDL[iDDL] = '0';
1518 }
1519 }
f6b5fa33 1520 }
1521 }
f6b5fa33 1522 }
1523 TObjString *ddlArray = new TObjString;
1524 ddlArray->SetString(arrDDL);
1525 TMap *activeDDL = new TMap;
1526 activeDDL->SetName("DDLArray");
1527 TObjString *key = new TObjString("DDLArray");
1528 activeDDL->Add(key,ddlArray);
1529 altroObjects->Add(activeDDL);
1530 changed=true;
f3652e39 1531 } else {
1532 Log ("ExtractAltro: No DCS map available. Active DDL list cannot be obtained.");
1533 result = 3;
1534 }
f6b5fa33 1535
1536// extract Altro configuration files
1537
9054511b 1538 for ( Int_t id=0; id<2; id++) {
1539 TList* list = GetFileSources(sourceFXS,idFXS[id].Data());
1540
1541 if (list && list->GetEntries()>0) {
9054511b 1542
1543// loop through all files from LDCs
1544
1545 UInt_t index = 0;
1546 while (list->At(index)!=NULL) {
1547 TObjString* fileNameEntry = (TObjString*) list->At(index);
1548 if (fileNameEntry!=NULL) {
1549 TString fileName = GetFile(sourceFXS, idFXS[id].Data(),
1550 fileNameEntry->GetString().Data());
1551 TFile *f = TFile::Open(fileName);
1552 if (!f) {
ff7d4b88 1553 const int mess_length=40;
1554 char message[mess_length];
1555 snprintf(message,mess_length,"Error opening Altro configuration file, id = %d",id);
9054511b 1556 Log (message);
1557 result =2;
1558 break;
1559 }
1560 TObjArray *altroFXS;
1561 f->GetObject("AltroConfig",altroFXS);
1562 if ( !altroFXS ) {
1563 Log ("No Altro configuration object in file.");
1564 result = 2;
1565 break;
1566 }
1567
1568 // replace entries for the sectors available in the present file
1569 AliTPCCalPad *acqStartFXS=(AliTPCCalPad*)altroFXS->FindObject("AcqStart");
1570 AliTPCCalPad *zsThrFXS=(AliTPCCalPad*)altroFXS->FindObject("ZsThr");
1571 AliTPCCalPad *acqStopFXS=(AliTPCCalPad*)altroFXS->FindObject("AcqStop");
1572 AliTPCCalPad *FPEDFXS=(AliTPCCalPad*)altroFXS->FindObject("FPED");
1573 AliTPCCalPad *maskedFXS=(AliTPCCalPad*)altroFXS->FindObject("Masked");
cf4216a3 1574 AliTPCCalPad *k1FXS=(AliTPCCalPad*)altroFXS->FindObject("K1");
1575 AliTPCCalPad *k2FXS=(AliTPCCalPad*)altroFXS->FindObject("K2");
1576 AliTPCCalPad *k3FXS=(AliTPCCalPad*)altroFXS->FindObject("K3");
1577 AliTPCCalPad *l1FXS=(AliTPCCalPad*)altroFXS->FindObject("L1");
1578 AliTPCCalPad *l2FXS=(AliTPCCalPad*)altroFXS->FindObject("L2");
1579 AliTPCCalPad *l3FXS=(AliTPCCalPad*)altroFXS->FindObject("L3");
1580 TMap *mapRCUconfigFXS = (TMap*)altroFXS->FindObject("RCUconfig");
1581 TIterator *mapFXSiter = mapRCUconfigFXS->MakeIterator();
1582
9054511b 1583 changed=true;
1584 for (Int_t sector=0; sector<nSectors; sector++) {
1585
1586 if (acqStartFXS) {
1587 AliTPCCalROC *rocAcqStart=acqStartFXS->GetCalROC(sector);
1588 if ( rocAcqStart ) acqStart->SetCalROC(rocAcqStart,sector);
1589 }
1590 if (zsThrFXS ) {
1591 AliTPCCalROC *rocZsThr=zsThrFXS->GetCalROC(sector);
1592 if ( rocZsThr ) zsThr->SetCalROC(rocZsThr,sector);
1593 }
1594 if (acqStopFXS) {
1595 AliTPCCalROC *rocAcqStop=acqStopFXS->GetCalROC(sector);
1596 if ( rocAcqStop ) acqStop->SetCalROC(rocAcqStop,sector);
1597 }
1598 if (FPEDFXS ) {
1599 AliTPCCalROC *rocFPED=FPEDFXS->GetCalROC(sector);
2d47cfd4 1600 if ( rocFPED ) FPED->SetCalROC(rocFPED,sector);
9054511b 1601 }
1602 if (maskedFXS) {
1603 AliTPCCalROC *rocMasked=maskedFXS->GetCalROC(sector);
1604 if ( rocMasked ) masked->SetCalROC(rocMasked,sector);
1605 }
cf4216a3 1606 if (k1FXS) {
1607 AliTPCCalROC *rocK1=k1FXS->GetCalROC(sector);
1608 if ( rocK1 ) k1->SetCalROC(rocK1,sector);
1609 }
1610 if (k2FXS) {
1611 AliTPCCalROC *rocK2=k2FXS->GetCalROC(sector);
1612 if ( rocK2 ) k2->SetCalROC(rocK2,sector);
1613 }
1614 if (k3FXS) {
1615 AliTPCCalROC *rocK3=k3FXS->GetCalROC(sector);
1616 if ( rocK3 ) k3->SetCalROC(rocK3,sector);
1617 }
1618 if (l1FXS) {
1619 AliTPCCalROC *rocL1=l1FXS->GetCalROC(sector);
1620 if ( rocL1 ) l1->SetCalROC(rocL1,sector);
1621 }
1622 if (l2FXS) {
1623 AliTPCCalROC *rocL2=l2FXS->GetCalROC(sector);
1624 if ( rocL2 ) l2->SetCalROC(rocL2,sector);
1625 }
1626 if (l3FXS) {
1627 AliTPCCalROC *rocL3=l3FXS->GetCalROC(sector);
1628 if ( rocL3 ) l3->SetCalROC(rocL3,sector);
1629 }
1630 }
1631 if (mapRCUconfigFXS) {
1632 Int_t mapEntries = mapRCUconfigFXS->GetEntries();
1633 TObjString* keyFXS;
1634 TVectorF* vecFXS;
1635 TVectorF* vec; // nSectors = 72 (total number of inner/outer sectors)
1636 for (Int_t i=0; i<mapEntries; ++i) {
1637 keyFXS=(TObjString*)mapFXSiter->Next();
1638 vecFXS=(TVectorF*)mapRCUconfigFXS->GetValue(keyFXS);
1639 vec=(TVectorF*)mapRCUconfig->GetValue(keyFXS);
1640 if (!vec) {
1641 vec = new TVectorF(3*nSectors);
1642 *vec = -1;
1643 mapRCUconfig->Add(keyFXS,vec);
1644 }
1645 if (vec->GetNoElements() != 3*nSectors ) {
1646 vec->ResizeTo(3*nSectors);
1647 }
1648 if (id==0) { // A side
1649 vec->SetSub(0,vecFXS->GetSub(0,nSectors/2-1));
1650 vec->SetSub(nSectors,vecFXS->GetSub(nSectors,2*nSectors-1));
1651 } else { // C side
1652 vec->SetSub(nSectors/2,vecFXS->GetSub(nSectors/2,nSectors-1));
1653 vec->SetSub(2*nSectors,vecFXS->GetSub(2*nSectors,3*nSectors-1));
1654 }
1655 }
9054511b 1656 }
1657 delete altroFXS;
1658 f->Close();
1659 }
1660 ++index;
1661 } // while(list)
1662 } else {
cf4216a3 1663 Log ("Error: no entries in AltroConfig file list!");
9054511b 1664 result = 1;
1665 }
1666
1667 } // for - id
1668//
1669// Store updated pedestal entry to OCDB
1670//
1671 if (changed) {
1672 AliCDBMetaData metaData;
1673 metaData.SetBeamPeriod(0);
1674 metaData.SetResponsible("Haavard Helstrup");
0492edf5 1675 metaData.SetAliRootVersion(ALIROOT_BRANCH);
9054511b 1676 metaData.SetComment("Preprocessor AliTPC data base entries.");
1677
dbc10140 1678 Bool_t storeOK = Store("Calib", "AltroConfig", altroObjects, &metaData, 0, kFALSE);
9054511b 1679 if ( !storeOK ) ++result;
1680 }
1681
795dbd3b 1682 altroObjects->Delete();
1683 delete altroObjects;
1684
9054511b 1685 return result;
1686}