| f7336fa3 |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| afc51ac2 |
16 | /* $Id$ */ |
| f7336fa3 |
17 | |
| 18 | /////////////////////////////////////////////////////////////////////////////// |
| 19 | // // |
| 20 | // TRD geometry class // |
| 21 | // // |
| 22 | /////////////////////////////////////////////////////////////////////////////// |
| 23 | |
| b4a9cd27 |
24 | #include <TGeoManager.h> |
| 25 | #include <TGeoPhysicalNode.h> |
| 2d0eca96 |
26 | #include <TVirtualMC.h> |
| e74d6d1b |
27 | #include <TMath.h> |
| b4a9cd27 |
28 | |
| 0d83b3a5 |
29 | #include "AliLog.h" |
| 90dbf5fb |
30 | #include "AliAlignObjParams.h" |
| 030b4415 |
31 | |
| 2745a409 |
32 | #include "AliTRDgeometry.h" |
| 33 | #include "AliTRDpadPlane.h" |
| ecb36af7 |
34 | |
| f7336fa3 |
35 | ClassImp(AliTRDgeometry) |
| 36 | |
| 793ff80c |
37 | //_____________________________________________________________________________ |
| 38 | |
| 39 | // |
| 40 | // The geometry constants |
| 41 | // |
| 053767a4 |
42 | const Int_t AliTRDgeometry::fgkNsector = kNsector; |
| 43 | const Int_t AliTRDgeometry::fgkNlayer = kNlayer; |
| 44 | const Int_t AliTRDgeometry::fgkNstack = kNstack; |
| 7925de54 |
45 | const Int_t AliTRDgeometry::fgkNdet = kNdet; |
| 793ff80c |
46 | |
| 47 | // |
| 48 | // Dimensions of the detector |
| 49 | // |
| 0a770ac9 |
50 | |
| b640260a |
51 | // Total length of the TRD mother volume |
| 52 | const Float_t AliTRDgeometry::fgkTlength = 751.0; |
| 53 | |
| 54 | // Parameter of the super module mother volumes |
| 7925de54 |
55 | const Float_t AliTRDgeometry::fgkSheight = 77.9; |
| 56 | const Float_t AliTRDgeometry::fgkSwidth1 = 94.881; |
| 57 | const Float_t AliTRDgeometry::fgkSwidth2 = 122.353; |
| b640260a |
58 | const Float_t AliTRDgeometry::fgkSlength = 702.0; |
| 59 | |
| 60 | // Length of the additional space in front of the supermodule |
| 61 | // used for services |
| 62 | const Float_t AliTRDgeometry::fgkFlength = (AliTRDgeometry::fgkTlength |
| 63 | - AliTRDgeometry::fgkSlength) / 2.0; |
| 793ff80c |
64 | |
| 73ae7b59 |
65 | // The super module side plates |
| 7925de54 |
66 | const Float_t AliTRDgeometry::fgkSMpltT = 0.2; |
| 73ae7b59 |
67 | |
| 053a5ea0 |
68 | // Vertical spacing of the chambers |
| 69 | const Float_t AliTRDgeometry::fgkVspace = 1.784; |
| 70 | // Horizontal spacing of the chambers |
| 71 | const Float_t AliTRDgeometry::fgkHspace = 2.0; |
| 72 | // Radial distance of the first ROC to the outer plates of the SM |
| 73 | const Float_t AliTRDgeometry::fgkVrocsm = 1.2; |
| 74 | |
| 0a770ac9 |
75 | // Height of different chamber parts |
| 76 | // Radiator |
| 7925de54 |
77 | const Float_t AliTRDgeometry::fgkCraH = 4.8; |
| 0a770ac9 |
78 | // Drift region |
| 7925de54 |
79 | const Float_t AliTRDgeometry::fgkCdrH = 3.0; |
| 0a770ac9 |
80 | // Amplification region |
| 7925de54 |
81 | const Float_t AliTRDgeometry::fgkCamH = 0.7; |
| 0a770ac9 |
82 | // Readout |
| 7925de54 |
83 | const Float_t AliTRDgeometry::fgkCroH = 2.316; |
| 053a5ea0 |
84 | // Additional width of the readout chamber frames |
| 85 | const Float_t AliTRDgeometry::fgkCroW = 0.9; |
| 86 | // Services on top of ROC |
| 87 | const Float_t AliTRDgeometry::fgkCsvH = AliTRDgeometry::fgkVspace |
| 88 | - 0.742; |
| 89 | // Total height (w/o services) |
| 7925de54 |
90 | const Float_t AliTRDgeometry::fgkCH = AliTRDgeometry::fgkCraH |
| 91 | + AliTRDgeometry::fgkCdrH |
| 92 | + AliTRDgeometry::fgkCamH |
| 25ca55ce |
93 | + AliTRDgeometry::fgkCroH; |
| 053a5ea0 |
94 | // Total height (with services) |
| 95 | |
| 96 | const Float_t AliTRDgeometry::fgkCHsv = AliTRDgeometry::fgkCH |
| 97 | + AliTRDgeometry::fgkCsvH; |
| 0a770ac9 |
98 | |
| a72494bb |
99 | // Distance of anode wire plane relative to middle of alignable volume |
| 100 | const Float_t AliTRDgeometry::fgkAnodePos = AliTRDgeometry::fgkCraH |
| 101 | + AliTRDgeometry::fgkCdrH |
| 102 | + AliTRDgeometry::fgkCamH/2.0 |
| 053a5ea0 |
103 | - AliTRDgeometry::fgkCHsv/2.0; |
| a797f961 |
104 | |
| 0a770ac9 |
105 | // Thicknesses of different parts of the chamber frame |
| 106 | // Lower aluminum frame |
| 7925de54 |
107 | const Float_t AliTRDgeometry::fgkCalT = 0.4; |
| 0a5f3331 |
108 | // Lower Wacosit frame sides |
| 7925de54 |
109 | const Float_t AliTRDgeometry::fgkCclsT = 0.21; |
| 0a5f3331 |
110 | // Lower Wacosit frame front |
| 7925de54 |
111 | const Float_t AliTRDgeometry::fgkCclfT = 1.0; |
| 0a5f3331 |
112 | // Thickness of glue around radiator |
| 7925de54 |
113 | const Float_t AliTRDgeometry::fgkCglT = 0.25; |
| 053a5ea0 |
114 | // Upper Wacosit frame around amplification region |
| 115 | const Float_t AliTRDgeometry::fgkCcuTa = 1.0; |
| 116 | const Float_t AliTRDgeometry::fgkCcuTb = 0.8; |
| 0a5f3331 |
117 | // Al frame of back panel |
| 7925de54 |
118 | const Float_t AliTRDgeometry::fgkCauT = 1.5; |
| 053a5ea0 |
119 | // Additional Al ledge at the lower chamber frame |
| 120 | // Actually the dimensions are not realistic, but |
| 121 | // modified in order to allow to mis-alignment. |
| 122 | // The amount of material is, however, correct |
| 123 | const Float_t AliTRDgeometry::fgkCalW = 2.5; |
| 124 | const Float_t AliTRDgeometry::fgkCalH = 0.4; |
| 125 | const Float_t AliTRDgeometry::fgkCalWmod = 0.4; |
| 126 | const Float_t AliTRDgeometry::fgkCalHmod = 2.5; |
| 127 | // Additional Wacosit ledge at the lower chamber frame |
| 128 | const Float_t AliTRDgeometry::fgkCwsW = 1.2; |
| 129 | const Float_t AliTRDgeometry::fgkCwsH = 0.3; |
| 0a770ac9 |
130 | |
| 131 | // Difference of outer chamber width and pad plane width |
| 7925de54 |
132 | const Float_t AliTRDgeometry::fgkCpadW = 0.0; |
| 133 | const Float_t AliTRDgeometry::fgkRpadW = 1.0; |
| 793ff80c |
134 | |
| 135 | // |
| 136 | // Thickness of the the material layers |
| 137 | // |
| 7925de54 |
138 | const Float_t AliTRDgeometry::fgkDrThick = AliTRDgeometry::fgkCdrH; |
| 139 | const Float_t AliTRDgeometry::fgkAmThick = AliTRDgeometry::fgkCamH; |
| 140 | const Float_t AliTRDgeometry::fgkXeThick = AliTRDgeometry::fgkDrThick |
| 141 | + AliTRDgeometry::fgkAmThick; |
| 053a5ea0 |
142 | const Float_t AliTRDgeometry::fgkWrThick = 0.00011; |
| 143 | |
| 144 | const Float_t AliTRDgeometry::fgkRMyThick = 0.0015; |
| 145 | const Float_t AliTRDgeometry::fgkRCbThick = 0.0055; |
| 146 | const Float_t AliTRDgeometry::fgkRGlThick = 0.0065; |
| 147 | const Float_t AliTRDgeometry::fgkRRhThick = 0.8; |
| 148 | const Float_t AliTRDgeometry::fgkRFbThick = fgkCraH - 2.0 * (fgkRMyThick |
| 149 | + fgkRCbThick |
| 150 | + fgkRRhThick); |
| 151 | |
| 152 | const Float_t AliTRDgeometry::fgkPPdThick = 0.0025; |
| 153 | const Float_t AliTRDgeometry::fgkPPpThick = 0.0356; |
| 154 | const Float_t AliTRDgeometry::fgkPGlThick = 0.1428; |
| 155 | const Float_t AliTRDgeometry::fgkPCbThick = 0.019; |
| 156 | const Float_t AliTRDgeometry::fgkPPcThick = 0.0486; |
| 157 | const Float_t AliTRDgeometry::fgkPRbThick = 0.0057; |
| 158 | const Float_t AliTRDgeometry::fgkPElThick = 0.0029; |
| 159 | const Float_t AliTRDgeometry::fgkPHcThick = fgkCroH - fgkPPdThick |
| 160 | - fgkPPpThick |
| 161 | - fgkPGlThick |
| 162 | - fgkPCbThick * 2.0 |
| 163 | - fgkPPcThick |
| 164 | - fgkPRbThick |
| 165 | - fgkPElThick; |
| 793ff80c |
166 | |
| 167 | // |
| 168 | // Position of the material layers |
| 169 | // |
| 7925de54 |
170 | const Float_t AliTRDgeometry::fgkDrZpos = 2.4; |
| 171 | const Float_t AliTRDgeometry::fgkAmZpos = 0.0; |
| 053a5ea0 |
172 | const Float_t AliTRDgeometry::fgkWrZposA = 0.0; |
| 173 | const Float_t AliTRDgeometry::fgkWrZposB = -fgkAmThick/2.0 + 0.001; |
| 174 | const Float_t AliTRDgeometry::fgkCalZpos = 0.3; |
| 7925de54 |
175 | |
| 25ca55ce |
176 | const Int_t AliTRDgeometry::fgkMCMmax = 16; |
| 177 | const Int_t AliTRDgeometry::fgkMCMrow = 4; |
| 178 | const Int_t AliTRDgeometry::fgkROBmaxC0 = 6; |
| 179 | const Int_t AliTRDgeometry::fgkROBmaxC1 = 8; |
| 7925de54 |
180 | const Int_t AliTRDgeometry::fgkADCmax = 21; |
| 181 | const Int_t AliTRDgeometry::fgkTBmax = 60; |
| 25ca55ce |
182 | const Int_t AliTRDgeometry::fgkPadmax = 18; |
| 7925de54 |
183 | const Int_t AliTRDgeometry::fgkColmax = 144; |
| 184 | const Int_t AliTRDgeometry::fgkRowmaxC0 = 12; |
| 185 | const Int_t AliTRDgeometry::fgkRowmaxC1 = 16; |
| 0a5f3331 |
186 | |
| ca06fab2 |
187 | const Double_t AliTRDgeometry::fgkTime0Base = 300.65; |
| 7925de54 |
188 | const Float_t AliTRDgeometry::fgkTime0[6] = { fgkTime0Base + 0 * (Cheight() + Cspace()) |
| 189 | , fgkTime0Base + 1 * (Cheight() + Cspace()) |
| 190 | , fgkTime0Base + 2 * (Cheight() + Cspace()) |
| 191 | , fgkTime0Base + 3 * (Cheight() + Cspace()) |
| 192 | , fgkTime0Base + 4 * (Cheight() + Cspace()) |
| 193 | , fgkTime0Base + 5 * (Cheight() + Cspace())}; |
| 793ff80c |
194 | |
| cff68175 |
195 | const Double_t AliTRDgeometry::fgkXtrdBeg = 288.43; // Values depend on position of TRD |
| 196 | const Double_t AliTRDgeometry::fgkXtrdEnd = 366.33; // mother volume inside space frame !!! |
| 197 | |
| 225096c8 |
198 | // The outer width of the chambers |
| b29bcb3a |
199 | const Float_t AliTRDgeometry::fgkCwidth[kNlayer] = { 90.4, 94.8, 99.3, 103.7, 108.1, 112.6 }; |
| 225096c8 |
200 | |
| 201 | // The outer lengths of the chambers |
| 202 | // Includes the spacings between the chambers! |
| 203 | const Float_t AliTRDgeometry::fgkClength[kNlayer][kNstack] = { { 124.0, 124.0, 110.0, 124.0, 124.0 } |
| 204 | , { 124.0, 124.0, 110.0, 124.0, 124.0 } |
| 205 | , { 131.0, 131.0, 110.0, 131.0, 131.0 } |
| 206 | , { 138.0, 138.0, 110.0, 138.0, 138.0 } |
| 207 | , { 145.0, 145.0, 110.0, 145.0, 145.0 } |
| 208 | , { 147.0, 147.0, 110.0, 147.0, 147.0 } }; |
| 209 | |
| b29bcb3a |
210 | Char_t AliTRDgeometry::fgSMstatus[kNsector] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 |
| 211 | , 1, 1, 1, 1, 1, 1, 1, 1, 1 }; |
| 212 | |
| 225096c8 |
213 | TObjArray* AliTRDgeometry::fgClusterMatrixArray = NULL; |
| 214 | |
| 215 | TObjArray* AliTRDgeometry::fgPadPlaneArray = NULL; |
| 216 | |
| f7336fa3 |
217 | //_____________________________________________________________________________ |
| 2745a409 |
218 | AliTRDgeometry::AliTRDgeometry() |
| f7336fa3 |
219 | { |
| 220 | // |
| 221 | // AliTRDgeometry default constructor |
| 222 | // |
| bd0f8685 |
223 | |
| f7336fa3 |
224 | } |
| 225 | |
| 226 | //_____________________________________________________________________________ |
| 227 | AliTRDgeometry::~AliTRDgeometry() |
| 228 | { |
| 8230f242 |
229 | // |
| 230 | // AliTRDgeometry destructor |
| 231 | // |
| bd0f8685 |
232 | |
| f7336fa3 |
233 | } |
| 234 | |
| f162af62 |
235 | //_____________________________________________________________________________ |
| 236 | void AliTRDgeometry::CreatePadPlaneArray() |
| 237 | { |
| 238 | // |
| 239 | // Creates the array of AliTRDpadPlane objects |
| 240 | // |
| 241 | |
| 225096c8 |
242 | if (fgPadPlaneArray) |
| 243 | return; |
| f162af62 |
244 | |
| 225096c8 |
245 | fgPadPlaneArray = new TObjArray(fgkNlayer * fgkNstack); |
| 053767a4 |
246 | for (Int_t ilayer = 0; ilayer < fgkNlayer; ilayer++) { |
| 247 | for (Int_t istack = 0; istack < fgkNstack; istack++) { |
| 248 | Int_t ipp = GetDetectorSec(ilayer,istack); |
| 225096c8 |
249 | fgPadPlaneArray->AddAt(CreatePadPlane(ilayer,istack),ipp); |
| f162af62 |
250 | } |
| 251 | } |
| 252 | |
| 253 | } |
| 254 | |
| 255 | //_____________________________________________________________________________ |
| 053767a4 |
256 | AliTRDpadPlane *AliTRDgeometry::CreatePadPlane(Int_t ilayer, Int_t istack) |
| f162af62 |
257 | { |
| 258 | // |
| 259 | // Creates an AliTRDpadPlane object |
| 260 | // |
| 261 | |
| 262 | AliTRDpadPlane *padPlane = new AliTRDpadPlane(); |
| 263 | |
| 053767a4 |
264 | padPlane->SetLayer(ilayer); |
| 265 | padPlane->SetStack(istack); |
| f162af62 |
266 | |
| 267 | padPlane->SetRowSpacing(0.0); |
| 268 | padPlane->SetColSpacing(0.0); |
| 269 | |
| 270 | padPlane->SetLengthRim(1.0); |
| 271 | padPlane->SetWidthRim(0.5); |
| 272 | |
| 273 | padPlane->SetNcols(144); |
| 274 | |
| 58897a75 |
275 | padPlane->SetAnodeWireOffset(0.25); |
| 276 | |
| f162af62 |
277 | // |
| 278 | // The pad plane parameter |
| 279 | // |
| 59f44727 |
280 | const Float_t kTiltAngle = 2.0; |
| 053767a4 |
281 | switch (ilayer) { |
| f162af62 |
282 | case 0: |
| 053767a4 |
283 | if (istack == 2) { |
| f162af62 |
284 | // L0C0 type |
| 285 | padPlane->SetNrows(12); |
| 286 | padPlane->SetLength(108.0); |
| f162af62 |
287 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
288 | padPlane->SetLengthIPad(9.0); |
| f162af62 |
289 | } |
| 290 | else { |
| 291 | // L0C1 type |
| 292 | padPlane->SetNrows(16); |
| 293 | padPlane->SetLength(122.0); |
| f162af62 |
294 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
295 | padPlane->SetLengthIPad(7.5); |
| f162af62 |
296 | } |
| 59f44727 |
297 | padPlane->SetWidth(92.2); |
| 298 | padPlane->SetWidthOPad(0.515); |
| 299 | padPlane->SetWidthIPad(0.635); |
| 300 | padPlane->SetTiltingAngle(-kTiltAngle); |
| f162af62 |
301 | break; |
| 302 | case 1: |
| 053767a4 |
303 | if (istack == 2) { |
| f162af62 |
304 | // L1C0 type |
| 305 | padPlane->SetNrows(12); |
| 306 | padPlane->SetLength(108.0); |
| f162af62 |
307 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
308 | padPlane->SetLengthIPad(9.0); |
| f162af62 |
309 | } |
| 310 | else { |
| 311 | // L1C1 type |
| 312 | padPlane->SetNrows(16); |
| 313 | padPlane->SetLength(122.0); |
| f162af62 |
314 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
315 | padPlane->SetLengthIPad(7.5); |
| f162af62 |
316 | } |
| 59f44727 |
317 | padPlane->SetWidth(96.6); |
| 318 | padPlane->SetWidthOPad(0.585); |
| 319 | padPlane->SetWidthIPad(0.665); |
| 320 | padPlane->SetTiltingAngle(kTiltAngle); |
| f162af62 |
321 | break; |
| 322 | case 2: |
| 053767a4 |
323 | if (istack == 2) { |
| f162af62 |
324 | // L2C0 type |
| 325 | padPlane->SetNrows(12); |
| 326 | padPlane->SetLength(108.0); |
| f162af62 |
327 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
328 | padPlane->SetLengthIPad(9.0); |
| f162af62 |
329 | } |
| 330 | else { |
| 331 | // L2C1 type |
| 332 | padPlane->SetNrows(16); |
| 333 | padPlane->SetLength(129.0); |
| f162af62 |
334 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
335 | padPlane->SetLengthIPad(8.0); |
| f162af62 |
336 | } |
| 59f44727 |
337 | padPlane->SetWidth(101.1); |
| 338 | padPlane->SetWidthOPad(0.705); |
| 339 | padPlane->SetWidthIPad(0.695); |
| 340 | padPlane->SetTiltingAngle(-kTiltAngle); |
| f162af62 |
341 | break; |
| 342 | case 3: |
| 053767a4 |
343 | if (istack == 2) { |
| f162af62 |
344 | // L3C0 type |
| 345 | padPlane->SetNrows(12); |
| 346 | padPlane->SetLength(108.0); |
| f162af62 |
347 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
348 | padPlane->SetLengthIPad(9.0); |
| f162af62 |
349 | } |
| 350 | else { |
| 351 | // L3C1 type |
| 352 | padPlane->SetNrows(16); |
| 353 | padPlane->SetLength(136.0); |
| f162af62 |
354 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
355 | padPlane->SetLengthIPad(8.5); |
| f162af62 |
356 | } |
| 59f44727 |
357 | padPlane->SetWidth(105.5); |
| 358 | padPlane->SetWidthOPad(0.775); |
| 359 | padPlane->SetWidthIPad(0.725); |
| 360 | padPlane->SetTiltingAngle(kTiltAngle); |
| f162af62 |
361 | break; |
| 362 | case 4: |
| 053767a4 |
363 | if (istack == 2) { |
| f162af62 |
364 | // L4C0 type |
| 365 | padPlane->SetNrows(12); |
| 366 | padPlane->SetLength(108.0); |
| f162af62 |
367 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
368 | } |
| 369 | else { |
| 370 | // L4C1 type |
| 371 | padPlane->SetNrows(16); |
| 372 | padPlane->SetLength(143.0); |
| f162af62 |
373 | padPlane->SetLengthOPad(7.5); |
| f162af62 |
374 | } |
| 59f44727 |
375 | padPlane->SetWidth(109.9); |
| 376 | padPlane->SetWidthOPad(0.845); |
| 377 | padPlane->SetLengthIPad(9.0); |
| 378 | padPlane->SetWidthIPad(0.755); |
| 379 | padPlane->SetTiltingAngle(-kTiltAngle); |
| f162af62 |
380 | break; |
| 381 | case 5: |
| 053767a4 |
382 | if (istack == 2) { |
| f162af62 |
383 | // L5C0 type |
| 384 | padPlane->SetNrows(12); |
| 385 | padPlane->SetLength(108.0); |
| f162af62 |
386 | padPlane->SetLengthOPad(8.0); |
| f162af62 |
387 | } |
| 388 | else { |
| 389 | // L5C1 type |
| 390 | padPlane->SetNrows(16); |
| 391 | padPlane->SetLength(145.0); |
| f162af62 |
392 | padPlane->SetLengthOPad(8.5); |
| f162af62 |
393 | } |
| 59f44727 |
394 | padPlane->SetWidth(114.4); |
| 395 | padPlane->SetWidthOPad(0.965); |
| 396 | padPlane->SetLengthIPad(9.0); |
| 397 | padPlane->SetWidthIPad(0.785); |
| 398 | padPlane->SetTiltingAngle(kTiltAngle); |
| f162af62 |
399 | break; |
| 400 | }; |
| 401 | |
| 402 | // |
| 403 | // The positions of the borders of the pads |
| 404 | // |
| 405 | // Row direction |
| 406 | // |
| 225096c8 |
407 | Double_t row = fgkClength[ilayer][istack] / 2.0 |
| f162af62 |
408 | - fgkRpadW |
| 409 | - padPlane->GetLengthRim(); |
| 410 | for (Int_t ir = 0; ir < padPlane->GetNrows(); ir++) { |
| 411 | padPlane->SetPadRow(ir,row); |
| 412 | row -= padPlane->GetRowSpacing(); |
| 413 | if (ir == 0) { |
| 414 | row -= padPlane->GetLengthOPad(); |
| 415 | } |
| 416 | else { |
| 417 | row -= padPlane->GetLengthIPad(); |
| 418 | } |
| 419 | } |
| 420 | // |
| 421 | // Column direction |
| 422 | // |
| 225096c8 |
423 | Double_t col = - fgkCwidth[ilayer] / 2.0 |
| 023b669c |
424 | - fgkCroW |
| 425 | + padPlane->GetWidthRim(); |
| f162af62 |
426 | for (Int_t ic = 0; ic < padPlane->GetNcols(); ic++) { |
| 427 | padPlane->SetPadCol(ic,col); |
| 023b669c |
428 | col += padPlane->GetColSpacing(); |
| f162af62 |
429 | if (ic == 0) { |
| 023b669c |
430 | col += padPlane->GetWidthOPad(); |
| f162af62 |
431 | } |
| 432 | else { |
| 023b669c |
433 | col += padPlane->GetWidthIPad(); |
| f162af62 |
434 | } |
| 435 | } |
| 436 | // Calculate the offset to translate from the local ROC system into |
| 437 | // the local supermodule system, which is used for clusters |
| 225096c8 |
438 | Double_t rowTmp = fgkClength[ilayer][0] |
| 439 | + fgkClength[ilayer][1] |
| 440 | + fgkClength[ilayer][2] / 2.0; |
| 053767a4 |
441 | for (Int_t jstack = 0; jstack < istack; jstack++) { |
| 225096c8 |
442 | rowTmp -= fgkClength[ilayer][jstack]; |
| f162af62 |
443 | } |
| 225096c8 |
444 | padPlane->SetPadRowSMOffset(rowTmp - fgkClength[ilayer][istack]/2.0); |
| f162af62 |
445 | |
| 446 | return padPlane; |
| 447 | |
| 448 | } |
| 449 | |
| f7336fa3 |
450 | //_____________________________________________________________________________ |
| bd0f8685 |
451 | void AliTRDgeometry::CreateGeometry(Int_t *idtmed) |
| 452 | { |
| 453 | // |
| 053a5ea0 |
454 | // Create the TRD geometry |
| bd0f8685 |
455 | // |
| 456 | // |
| 457 | // Names of the TRD volumina (xx = detector number): |
| 458 | // |
| 053a5ea0 |
459 | // Volume (Air) wrapping the readout chamber components |
| 460 | // UTxx includes: UAxx, UDxx, UFxx, UUxx |
| 461 | // |
| 462 | // Lower part of the readout chambers (drift volume + radiator) |
| 463 | // UAxx Aluminum frames (Al) |
| 464 | // |
| 465 | // Upper part of the readout chambers (readout plane + fee) |
| 466 | // UDxx Wacosit frames of amp. region (Wacosit) |
| 467 | // UFxx Aluminum frame of back panel (Al) |
| 468 | // |
| 469 | // Services on chambers (cooling, cables, MCMs, DCS boards, ...) |
| 470 | // UUxx Volume containing the services (Air) |
| 471 | // |
| 472 | // Material layers inside sensitive area: |
| 473 | // Name Description Mat. Thick. Dens. Radl. X/X_0 |
| 474 | // |
| 475 | // URMYxx Mylar layers (x2) Mylar 0.0015 1.39 28.5464 0.005% |
| 476 | // URCBxx Carbon layer (x2) Carbon 0.0055 1.75 24.2824 0.023% |
| 477 | // URGLxx Glue on the carbon layers (x2) Araldite 0.0065 1.12 37.0664 0.018% |
| 478 | // URRHxx Rohacell layer (x2) Rohacell 0.8 0.075 536.005 0.149% |
| 479 | // URFBxx Fiber mat layer PP 3.186 0.068 649.727 0.490% |
| 480 | // |
| 481 | // UJxx Drift region Xe/CO2 3.0 0.00495 1792.37 0.167% |
| 482 | // UKxx Amplification region Xe/CO2 0.7 0.00495 1792.37 0.039% |
| 483 | // UWxx Wire planes (x2) Copper 0.00011 8.96 1.43503 0.008% |
| 484 | // |
| 485 | // UPPDxx Copper of pad plane Copper 0.0025 8.96 1.43503 0.174% |
| 486 | // UPPPxx PCB of pad plane G10 0.0356 2.0 14.9013 0.239% |
| 487 | // UPGLxx Glue on pad planes Araldite 0.0923 1.12 37.0664 0.249% |
| 488 | // + add. glue (ca. 600g) Araldite 0.0505 1.12 37.0663 0.107% |
| 489 | // UPCBxx Carbon fiber mats (x2) Carbon 0.019 1.75 24.2824 0.078% |
| 490 | // UPHCxx Honeycomb structure Aramide 2.0299 0.032 1198.84 0.169% |
| 491 | // UPPCxx PCB of readout board G10 0.0486 2.0 14.9013 0.326% |
| 492 | // UPRDxx Copper of readout board Copper 0.0057 8.96 1.43503 0.404% |
| 493 | // UPELxx Electronics + cables Copper 0.0029 8.96 1.43503 0.202% |
| bd0f8685 |
494 | // |
| 495 | |
| 496 | const Int_t kNparTrd = 4; |
| 497 | const Int_t kNparCha = 3; |
| 498 | |
| 030b4415 |
499 | Float_t xpos; |
| 500 | Float_t ypos; |
| 501 | Float_t zpos; |
| bd0f8685 |
502 | |
| 503 | Float_t parTrd[kNparTrd]; |
| 504 | Float_t parCha[kNparCha]; |
| 505 | |
| 024c0422 |
506 | const Int_t kTag = 100; |
| 507 | Char_t cTagV[kTag]; |
| 508 | Char_t cTagM[kTag]; |
| bd0f8685 |
509 | |
| e7014565 |
510 | // There are three TRD volumes for the supermodules in order to accomodate |
| 511 | // the different arrangements in front of PHOS |
| 512 | // UTR1: Default supermodule |
| 513 | // UTR2: Supermodule in front of PHOS with double carbon cover |
| 514 | // UTR3: As UTR2, but w/o middle stack |
| b640260a |
515 | // |
| 516 | // The mother volume for one sector (Air), full length in z-direction |
| bd0f8685 |
517 | // Provides material for side plates of super module |
| 030b4415 |
518 | parTrd[0] = fgkSwidth1/2.0; |
| 519 | parTrd[1] = fgkSwidth2/2.0; |
| 0a5f3331 |
520 | parTrd[2] = fgkSlength/2.0; |
| 030b4415 |
521 | parTrd[3] = fgkSheight/2.0; |
| bd0f8685 |
522 | gMC->Gsvolu("UTR1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| e7014565 |
523 | gMC->Gsvolu("UTR2","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| 524 | gMC->Gsvolu("UTR3","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| a797f961 |
525 | // The outer aluminum plates of the super module (Al) |
| 030b4415 |
526 | parTrd[0] = fgkSwidth1/2.0; |
| 527 | parTrd[1] = fgkSwidth2/2.0; |
| 0a5f3331 |
528 | parTrd[2] = fgkSlength/2.0; |
| 030b4415 |
529 | parTrd[3] = fgkSheight/2.0; |
| bd0f8685 |
530 | gMC->Gsvolu("UTS1","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
| e7014565 |
531 | gMC->Gsvolu("UTS2","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
| 532 | gMC->Gsvolu("UTS3","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
| bd0f8685 |
533 | // The inner part of the TRD mother volume for one sector (Air), |
| 534 | // full length in z-direction |
| 030b4415 |
535 | parTrd[0] = fgkSwidth1/2.0 - fgkSMpltT; |
| 536 | parTrd[1] = fgkSwidth2/2.0 - fgkSMpltT; |
| 0a5f3331 |
537 | parTrd[2] = fgkSlength/2.0; |
| 030b4415 |
538 | parTrd[3] = fgkSheight/2.0 - fgkSMpltT; |
| bd0f8685 |
539 | gMC->Gsvolu("UTI1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| e7014565 |
540 | gMC->Gsvolu("UTI2","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| 541 | gMC->Gsvolu("UTI3","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| bd0f8685 |
542 | |
| b640260a |
543 | // The inner part of the TRD mother volume for services in front |
| 544 | // of the supermodules (Air), |
| 545 | parTrd[0] = fgkSwidth1/2.0; |
| 546 | parTrd[1] = fgkSwidth2/2.0; |
| 547 | parTrd[2] = fgkFlength/2.0; |
| 548 | parTrd[3] = fgkSheight/2.0; |
| 549 | gMC->Gsvolu("UTF1","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| 550 | gMC->Gsvolu("UTF2","TRD1",idtmed[1302-1],parTrd,kNparTrd); |
| 551 | |
| 053767a4 |
552 | for (Int_t istack = 0; istack < kNstack; istack++) { |
| 553 | for (Int_t ilayer = 0; ilayer < kNlayer; ilayer++) { |
| bd0f8685 |
554 | |
| 053767a4 |
555 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| bd0f8685 |
556 | |
| 0a5f3331 |
557 | // The lower part of the readout chambers (drift volume + radiator) |
| bd0f8685 |
558 | // The aluminum frames |
| 024c0422 |
559 | snprintf(cTagV,kTag,"UA%02d",iDet); |
| 225096c8 |
560 | parCha[0] = fgkCwidth[ilayer]/2.0; |
| 561 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 030b4415 |
562 | parCha[2] = fgkCraH/2.0 + fgkCdrH/2.0; |
| bd0f8685 |
563 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); |
| 0a5f3331 |
564 | // The additional aluminum on the frames |
| 053a5ea0 |
565 | // This part has not the correct shape but is just supposed to |
| b640260a |
566 | // represent the missing material. The correct form of the L-shaped |
| 0a5f3331 |
567 | // profile would not fit into the alignable volume. |
| 024c0422 |
568 | snprintf(cTagV,kTag,"UZ%02d",iDet); |
| 053a5ea0 |
569 | parCha[0] = fgkCalWmod/2.0; |
| 225096c8 |
570 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 053a5ea0 |
571 | parCha[2] = fgkCalHmod/2.0; |
| 0a5f3331 |
572 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); |
| 053a5ea0 |
573 | // The additional Wacosit on the frames |
| 024c0422 |
574 | snprintf(cTagV,kTag,"UP%02d",iDet); |
| 053a5ea0 |
575 | parCha[0] = fgkCwsW/2.0; |
| 225096c8 |
576 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 053a5ea0 |
577 | parCha[2] = fgkCwsH/2.0; |
| 578 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); |
| 0a5f3331 |
579 | // The Wacosit frames |
| 024c0422 |
580 | snprintf(cTagV,kTag,"UB%02d",iDet); |
| 225096c8 |
581 | parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT; |
| 030b4415 |
582 | parCha[1] = -1.0; |
| 583 | parCha[2] = -1.0; |
| bd0f8685 |
584 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); |
| 0a5f3331 |
585 | // The glue around the radiator |
| 024c0422 |
586 | snprintf(cTagV,kTag,"UX%02d",iDet); |
| 225096c8 |
587 | parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT; |
| 588 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT; |
| 0a5f3331 |
589 | parCha[2] = fgkCraH/2.0; |
| 590 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha); |
| 591 | // The inner part of radiator (air) |
| 024c0422 |
592 | snprintf(cTagV,kTag,"UC%02d",iDet); |
| 225096c8 |
593 | parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT - fgkCglT; |
| 594 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT - fgkCglT; |
| 030b4415 |
595 | parCha[2] = -1.0; |
| bd0f8685 |
596 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); |
| 597 | |
| 0a5f3331 |
598 | // The upper part of the readout chambers (amplification volume) |
| 599 | // The Wacosit frames |
| 024c0422 |
600 | snprintf(cTagV,kTag,"UD%02d",iDet); |
| 225096c8 |
601 | parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW; |
| 602 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 030b4415 |
603 | parCha[2] = fgkCamH/2.0; |
| bd0f8685 |
604 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha); |
| 0a5f3331 |
605 | // The inner part of the Wacosit frame (air) |
| 024c0422 |
606 | snprintf(cTagV,kTag,"UE%02d",iDet); |
| 225096c8 |
607 | parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW - fgkCcuTb; |
| 608 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCcuTa; |
| bd0f8685 |
609 | parCha[2] = -1.; |
| 610 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); |
| 0a5f3331 |
611 | |
| 053a5ea0 |
612 | // The back panel, including pad plane and readout boards |
| bd0f8685 |
613 | // The aluminum frames |
| 024c0422 |
614 | snprintf(cTagV,kTag,"UF%02d",iDet); |
| 225096c8 |
615 | parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW; |
| 616 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 030b4415 |
617 | parCha[2] = fgkCroH/2.0; |
| bd0f8685 |
618 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha); |
| 619 | // The inner part of the aluminum frames |
| 024c0422 |
620 | snprintf(cTagV,kTag,"UG%02d",iDet); |
| 225096c8 |
621 | parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW - fgkCauT; |
| 622 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCauT; |
| 030b4415 |
623 | parCha[2] = -1.0; |
| bd0f8685 |
624 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha); |
| 625 | |
| 053a5ea0 |
626 | // |
| bd0f8685 |
627 | // The material layers inside the chambers |
| 053a5ea0 |
628 | // |
| 629 | |
| 630 | // Mylar layer (radiator) |
| 631 | parCha[0] = -1.0; |
| 632 | parCha[1] = -1.0; |
| 633 | parCha[2] = fgkRMyThick/2.0; |
| 024c0422 |
634 | snprintf(cTagV,kTag,"URMY%02d",iDet); |
| 053a5ea0 |
635 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1327-1],parCha,kNparCha); |
| 636 | // Carbon layer (radiator) |
| 637 | parCha[0] = -1.0; |
| 638 | parCha[1] = -1.0; |
| 639 | parCha[2] = fgkRCbThick/2.0; |
| 024c0422 |
640 | snprintf(cTagV,kTag,"URCB%02d",iDet); |
| 053a5ea0 |
641 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1326-1],parCha,kNparCha); |
| 642 | // Araldite layer (radiator) |
| 643 | parCha[0] = -1.0; |
| 644 | parCha[1] = -1.0; |
| 645 | parCha[2] = fgkRGlThick/2.0; |
| 024c0422 |
646 | snprintf(cTagV,kTag,"URGL%02d",iDet); |
| 053a5ea0 |
647 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha); |
| 0a5f3331 |
648 | // Rohacell layer (radiator) |
| 030b4415 |
649 | parCha[0] = -1.0; |
| 650 | parCha[1] = -1.0; |
| 053a5ea0 |
651 | parCha[2] = fgkRRhThick/2.0; |
| 024c0422 |
652 | snprintf(cTagV,kTag,"URRH%02d",iDet); |
| bd0f8685 |
653 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1315-1],parCha,kNparCha); |
| 053a5ea0 |
654 | // Fiber layer (radiator) |
| 655 | parCha[0] = -1.0; |
| 656 | parCha[1] = -1.0; |
| 657 | parCha[2] = fgkRFbThick/2.0; |
| 024c0422 |
658 | snprintf(cTagV,kTag,"URFB%02d",iDet); |
| 053a5ea0 |
659 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1328-1],parCha,kNparCha); |
| 660 | |
| bd0f8685 |
661 | // Xe/Isobutane layer (drift volume) |
| 225096c8 |
662 | parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT; |
| 663 | parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT; |
| 030b4415 |
664 | parCha[2] = fgkDrThick/2.0; |
| 024c0422 |
665 | snprintf(cTagV,kTag,"UJ%02d",iDet); |
| bd0f8685 |
666 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha); |
| 053a5ea0 |
667 | |
| bd0f8685 |
668 | // Xe/Isobutane layer (amplification volume) |
| 0a5f3331 |
669 | parCha[0] = -1.0; |
| 670 | parCha[1] = -1.0; |
| 030b4415 |
671 | parCha[2] = fgkAmThick/2.0; |
| 024c0422 |
672 | snprintf(cTagV,kTag,"UK%02d",iDet); |
| bd0f8685 |
673 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha); |
| 0a5f3331 |
674 | // Cu layer (wire plane) |
| 675 | parCha[0] = -1.0; |
| 676 | parCha[1] = -1.0; |
| 677 | parCha[2] = fgkWrThick/2.0; |
| 024c0422 |
678 | snprintf(cTagV,kTag,"UW%02d",iDet); |
| 0a5f3331 |
679 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1303-1],parCha,kNparCha); |
| 053a5ea0 |
680 | |
| bd0f8685 |
681 | // Cu layer (pad plane) |
| 0a5f3331 |
682 | parCha[0] = -1.0; |
| 683 | parCha[1] = -1.0; |
| 053a5ea0 |
684 | parCha[2] = fgkPPdThick/2.0; |
| 024c0422 |
685 | snprintf(cTagV,kTag,"UPPD%02d",iDet); |
| bd0f8685 |
686 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1305-1],parCha,kNparCha); |
| 053a5ea0 |
687 | // G10 layer (pad plane) |
| 0a5f3331 |
688 | parCha[0] = -1.0; |
| 689 | parCha[1] = -1.0; |
| 053a5ea0 |
690 | parCha[2] = fgkPPpThick/2.0; |
| 024c0422 |
691 | snprintf(cTagV,kTag,"UPPP%02d",iDet); |
| 053a5ea0 |
692 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1313-1],parCha,kNparCha); |
| 693 | // Araldite layer (glue) |
| 694 | parCha[0] = -1.0; |
| 695 | parCha[1] = -1.0; |
| 696 | parCha[2] = fgkPGlThick/2.0; |
| 024c0422 |
697 | snprintf(cTagV,kTag,"UPGL%02d",iDet); |
| 0a5f3331 |
698 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha); |
| 053a5ea0 |
699 | // Carbon layer (carbon fiber mats) |
| 700 | parCha[0] = -1.0; |
| 701 | parCha[1] = -1.0; |
| 702 | parCha[2] = fgkPCbThick/2.0; |
| 024c0422 |
703 | snprintf(cTagV,kTag,"UPCB%02d",iDet); |
| 053a5ea0 |
704 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1326-1],parCha,kNparCha); |
| 705 | // Aramide layer (honeycomb) |
| 0a5f3331 |
706 | parCha[0] = -1.0; |
| 707 | parCha[1] = -1.0; |
| 053a5ea0 |
708 | parCha[2] = fgkPHcThick/2.0; |
| 024c0422 |
709 | snprintf(cTagV,kTag,"UPHC%02d",iDet); |
| 0a5f3331 |
710 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1310-1],parCha,kNparCha); |
| 711 | // G10 layer (PCB readout board) |
| 712 | parCha[0] = -1.0; |
| 713 | parCha[1] = -1.0; |
| 053a5ea0 |
714 | parCha[2] = fgkPPcThick/2; |
| 024c0422 |
715 | snprintf(cTagV,kTag,"UPPC%02d",iDet); |
| a797f961 |
716 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1313-1],parCha,kNparCha); |
| 0a5f3331 |
717 | // Cu layer (traces in readout board) |
| 718 | parCha[0] = -1.0; |
| 719 | parCha[1] = -1.0; |
| 053a5ea0 |
720 | parCha[2] = fgkPRbThick/2.0; |
| 024c0422 |
721 | snprintf(cTagV,kTag,"UPRB%02d",iDet); |
| a797f961 |
722 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1306-1],parCha,kNparCha); |
| 053a5ea0 |
723 | // Cu layer (other material on in readout board, incl. screws) |
| 0a5f3331 |
724 | parCha[0] = -1.0; |
| 725 | parCha[1] = -1.0; |
| 053a5ea0 |
726 | parCha[2] = fgkPElThick/2.0; |
| 024c0422 |
727 | snprintf(cTagV,kTag,"UPEL%02d",iDet); |
| 0a5f3331 |
728 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1304-1],parCha,kNparCha); |
| bd0f8685 |
729 | |
| 053a5ea0 |
730 | // |
| bd0f8685 |
731 | // Position the layers in the chambers |
| 053a5ea0 |
732 | // |
| 030b4415 |
733 | xpos = 0.0; |
| 734 | ypos = 0.0; |
| 053a5ea0 |
735 | |
| bd0f8685 |
736 | // Lower part |
| 053a5ea0 |
737 | // Mylar layers (radiator) |
| 738 | zpos = fgkRMyThick/2.0 - fgkCraH/2.0; |
| 024c0422 |
739 | snprintf(cTagV,kTag,"URMY%02d",iDet); |
| 740 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| 053a5ea0 |
741 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 742 | zpos = -fgkRMyThick/2.0 + fgkCraH/2.0; |
| 024c0422 |
743 | snprintf(cTagV,kTag,"URMY%02d",iDet); |
| 744 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| 053a5ea0 |
745 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 746 | // Carbon layers (radiator) |
| 747 | zpos = fgkRCbThick/2.0 + fgkRMyThick - fgkCraH/2.0; |
| 024c0422 |
748 | snprintf(cTagV,kTag,"URCB%02d",iDet); |
| 749 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| 053a5ea0 |
750 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 751 | zpos = -fgkRCbThick/2.0 - fgkRMyThick + fgkCraH/2.0; |
| 024c0422 |
752 | snprintf(cTagV,kTag,"URCB%02d",iDet); |
| 753 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| 053a5ea0 |
754 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 755 | // Carbon layers (radiator) |
| 756 | zpos = fgkRGlThick/2.0 + fgkRCbThick + fgkRMyThick - fgkCraH/2.0; |
| 024c0422 |
757 | snprintf(cTagV,kTag,"URGL%02d",iDet); |
| 758 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| bd0f8685 |
759 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
760 | zpos = -fgkRGlThick/2.0 - fgkRCbThick - fgkRMyThick + fgkCraH/2.0; |
| 024c0422 |
761 | snprintf(cTagV,kTag,"URGL%02d",iDet); |
| 762 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| 053a5ea0 |
763 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 764 | // Rohacell layers (radiator) |
| 765 | zpos = fgkRRhThick/2.0 + fgkRGlThick + fgkRCbThick + fgkRMyThick - fgkCraH/2.0; |
| 024c0422 |
766 | snprintf(cTagV,kTag,"URRH%02d",iDet); |
| 767 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| 053a5ea0 |
768 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 769 | zpos = -fgkRRhThick/2.0 - fgkRGlThick - fgkRCbThick - fgkRMyThick + fgkCraH/2.0; |
| 024c0422 |
770 | snprintf(cTagV,kTag,"URRH%02d",iDet); |
| 771 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| 053a5ea0 |
772 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 773 | // Fiber layers (radiator) |
| 774 | zpos = 0.0; |
| 024c0422 |
775 | snprintf(cTagV,kTag,"URFB%02d",iDet); |
| 776 | snprintf(cTagM,kTag,"UC%02d",iDet); |
| 053a5ea0 |
777 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 778 | |
| bd0f8685 |
779 | // Xe/Isobutane layer (drift volume) |
| 780 | zpos = fgkDrZpos; |
| 024c0422 |
781 | snprintf(cTagV,kTag,"UJ%02d",iDet); |
| 782 | snprintf(cTagM,kTag,"UB%02d",iDet); |
| bd0f8685 |
783 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
784 | |
| bd0f8685 |
785 | // Upper part |
| 786 | // Xe/Isobutane layer (amplification volume) |
| 787 | zpos = fgkAmZpos; |
| 024c0422 |
788 | snprintf(cTagV,kTag,"UK%02d",iDet); |
| 789 | snprintf(cTagM,kTag,"UE%02d",iDet); |
| bd0f8685 |
790 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
791 | // Cu layer (wire planes inside amplification volume) |
| 792 | zpos = fgkWrZposA; |
| 024c0422 |
793 | snprintf(cTagV,kTag,"UW%02d",iDet); |
| 794 | snprintf(cTagM,kTag,"UK%02d",iDet); |
| 0a5f3331 |
795 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
796 | zpos = fgkWrZposB; |
| 024c0422 |
797 | snprintf(cTagV,kTag,"UW%02d",iDet); |
| 798 | snprintf(cTagM,kTag,"UK%02d",iDet); |
| 053a5ea0 |
799 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 800 | |
| 801 | // Back panel + pad plane + readout part |
| bd0f8685 |
802 | // Cu layer (pad plane) |
| 053a5ea0 |
803 | zpos = fgkPPdThick/2.0 - fgkCroH/2.0; |
| 024c0422 |
804 | snprintf(cTagV,kTag,"UPPD%02d",iDet); |
| 805 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| 053a5ea0 |
806 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 807 | // G10 layer (pad plane) |
| 808 | zpos = fgkPPpThick/2.0 + fgkPPdThick - fgkCroH/2.0; |
| 024c0422 |
809 | snprintf(cTagV,kTag,"UPPP%02d",iDet); |
| 810 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| bd0f8685 |
811 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
812 | // Araldite layer (glue) |
| 813 | zpos = fgkPGlThick/2.0 + fgkPPpThick + fgkPPdThick - fgkCroH/2.0; |
| 024c0422 |
814 | snprintf(cTagV,kTag,"UPGL%02d",iDet); |
| 815 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| 0a5f3331 |
816 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
817 | // Carbon layers (carbon fiber mats) |
| 818 | zpos = fgkPCbThick/2.0 + fgkPGlThick + fgkPPpThick + fgkPPdThick - fgkCroH/2.0; |
| 024c0422 |
819 | snprintf(cTagV,kTag,"UPCB%02d",iDet); |
| 820 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| 053a5ea0 |
821 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 822 | zpos = -fgkPCbThick/2.0 - fgkPPcThick - fgkPRbThick - fgkPElThick + fgkCroH/2.0; |
| 024c0422 |
823 | snprintf(cTagV,kTag,"UPCB%02d",iDet); |
| 824 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| 053a5ea0 |
825 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 826 | // Aramide layer (honeycomb) |
| 827 | zpos = fgkPHcThick/2.0 + fgkPCbThick + fgkPGlThick + fgkPPpThick + fgkPPdThick - fgkCroH/2.0; |
| 024c0422 |
828 | snprintf(cTagV,kTag,"UPHC%02d",iDet); |
| 829 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| bd0f8685 |
830 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
831 | // G10 layer (PCB readout board) |
| 053a5ea0 |
832 | zpos = -fgkPPcThick/2.0 - fgkPRbThick - fgkPElThick + fgkCroH/2.0; |
| 024c0422 |
833 | snprintf(cTagV,kTag,"UPPC%02d",iDet); |
| 834 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| a797f961 |
835 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
836 | // Cu layer (traces in readout board) |
| 053a5ea0 |
837 | zpos = -fgkPRbThick/2.0 - fgkPElThick + fgkCroH/2.0; |
| 024c0422 |
838 | snprintf(cTagV,kTag,"UPRB%02d",iDet); |
| 839 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| a797f961 |
840 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
841 | // Cu layer (other materials on readout board, incl. screws) |
| 842 | zpos = -fgkPElThick/2.0 + fgkCroH/2.0; |
| 024c0422 |
843 | snprintf(cTagV,kTag,"UPEL%02d",iDet); |
| 844 | snprintf(cTagM,kTag,"UG%02d",iDet); |
| 0a5f3331 |
845 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
846 | |
| 847 | // Position the inner volumes of the chambers in the frames |
| 030b4415 |
848 | xpos = 0.0; |
| 849 | ypos = 0.0; |
| 053a5ea0 |
850 | |
| 851 | // The inner part of the radiator (air) |
| 030b4415 |
852 | zpos = 0.0; |
| 024c0422 |
853 | snprintf(cTagV,kTag,"UC%02d",iDet); |
| 854 | snprintf(cTagM,kTag,"UX%02d",iDet); |
| 0a5f3331 |
855 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 856 | // The glue around the radiator |
| 857 | zpos = fgkCraH/2.0 - fgkCdrH/2.0 - fgkCraH/2.0; |
| 024c0422 |
858 | snprintf(cTagV,kTag,"UX%02d",iDet); |
| 859 | snprintf(cTagM,kTag,"UB%02d",iDet); |
| bd0f8685 |
860 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
861 | // The lower Wacosit frame inside the aluminum frame |
| 862 | zpos = 0.0; |
| 024c0422 |
863 | snprintf(cTagV,kTag,"UB%02d",iDet); |
| 864 | snprintf(cTagM,kTag,"UA%02d",iDet); |
| bd0f8685 |
865 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
866 | |
| 0a5f3331 |
867 | // The inside of the upper Wacosit frame |
| 868 | zpos = 0.0; |
| 024c0422 |
869 | snprintf(cTagV,kTag,"UE%02d",iDet); |
| 870 | snprintf(cTagM,kTag,"UD%02d",iDet); |
| bd0f8685 |
871 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
872 | |
| bd0f8685 |
873 | // The inside of the upper aluminum frame |
| 0a5f3331 |
874 | zpos = 0.0; |
| 024c0422 |
875 | snprintf(cTagV,kTag,"UG%02d",iDet); |
| 876 | snprintf(cTagM,kTag,"UF%02d",iDet); |
| bd0f8685 |
877 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 878 | |
| bd0f8685 |
879 | } |
| 880 | } |
| 881 | |
| 882 | // Create the volumes of the super module frame |
| 883 | CreateFrame(idtmed); |
| 884 | |
| 885 | // Create the volumes of the services |
| 886 | CreateServices(idtmed); |
| 887 | |
| 053767a4 |
888 | for (Int_t istack = 0; istack < kNstack; istack++) { |
| 889 | for (Int_t ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 053a5ea0 |
890 | AssembleChamber(ilayer,istack); |
| bd0f8685 |
891 | } |
| 892 | } |
| 893 | |
| 030b4415 |
894 | xpos = 0.0; |
| 895 | ypos = 0.0; |
| 896 | zpos = 0.0; |
| bd0f8685 |
897 | gMC->Gspos("UTI1",1,"UTS1",xpos,ypos,zpos,0,"ONLY"); |
| e7014565 |
898 | gMC->Gspos("UTI2",1,"UTS2",xpos,ypos,zpos,0,"ONLY"); |
| 899 | gMC->Gspos("UTI3",1,"UTS3",xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
900 | |
| 030b4415 |
901 | xpos = 0.0; |
| 902 | ypos = 0.0; |
| 903 | zpos = 0.0; |
| bd0f8685 |
904 | gMC->Gspos("UTS1",1,"UTR1",xpos,ypos,zpos,0,"ONLY"); |
| e7014565 |
905 | gMC->Gspos("UTS2",1,"UTR2",xpos,ypos,zpos,0,"ONLY"); |
| 906 | gMC->Gspos("UTS3",1,"UTR3",xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
907 | |
| 908 | // Put the TRD volumes into the space frame mother volumes |
| 909 | // if enabled via status flag |
| 030b4415 |
910 | xpos = 0.0; |
| 911 | ypos = 0.0; |
| 912 | zpos = 0.0; |
| 053767a4 |
913 | for (Int_t isector = 0; isector < kNsector; isector++) { |
| 5f6f5c22 |
914 | if (GetSMstatus(isector)) { |
| 024c0422 |
915 | snprintf(cTagV,kTag,"BTRD%d",isector); |
| 053767a4 |
916 | switch (isector) { |
| e7014565 |
917 | case 13: |
| 918 | case 14: |
| 919 | case 15: |
| 920 | // Double carbon, w/o middle stack |
| 921 | gMC->Gspos("UTR3",1,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 922 | break; |
| 923 | case 11: |
| 924 | case 12: |
| 925 | // Double carbon, all stacks |
| 926 | gMC->Gspos("UTR2",1,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 927 | break; |
| 928 | default: |
| 929 | // Standard supermodule |
| 930 | gMC->Gspos("UTR1",1,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 931 | }; |
| bd0f8685 |
932 | } |
| 933 | } |
| 934 | |
| b640260a |
935 | // Put the TRD volumes into the space frame mother volumes |
| 936 | // if enabled via status flag |
| 937 | xpos = 0.0; |
| 938 | ypos = 0.5*fgkSlength + 0.5*fgkFlength; |
| 939 | zpos = 0.0; |
| 053767a4 |
940 | for (Int_t isector = 0; isector < kNsector; isector++) { |
| 5f6f5c22 |
941 | if (GetSMstatus(isector)) { |
| 024c0422 |
942 | snprintf(cTagV,kTag,"BTRD%d",isector); |
| b640260a |
943 | gMC->Gspos("UTF1",1,cTagV,xpos, ypos,zpos,0,"ONLY"); |
| 944 | gMC->Gspos("UTF2",1,cTagV,xpos,-ypos,zpos,0,"ONLY"); |
| 945 | } |
| 946 | } |
| 947 | |
| bd0f8685 |
948 | } |
| 949 | |
| 950 | //_____________________________________________________________________________ |
| 951 | void AliTRDgeometry::CreateFrame(Int_t *idtmed) |
| 952 | { |
| 953 | // |
| 954 | // Create the geometry of the frame of the supermodule |
| 955 | // |
| 956 | // Names of the TRD services volumina |
| 957 | // |
| 958 | // USRL Support rails for the chambers (Al) |
| 959 | // USxx Support cross bars between the chambers (Al) |
| 0a5f3331 |
960 | // USHx Horizontal connection between the cross bars (Al) |
| 961 | // USLx Long corner ledges (Al) |
| bd0f8685 |
962 | // |
| 963 | |
| 053767a4 |
964 | Int_t ilayer = 0; |
| bd0f8685 |
965 | |
| 966 | Float_t xpos = 0.0; |
| 967 | Float_t ypos = 0.0; |
| 968 | Float_t zpos = 0.0; |
| 969 | |
| 024c0422 |
970 | const Int_t kTag = 100; |
| 971 | Char_t cTagV[kTag]; |
| 972 | Char_t cTagM[kTag]; |
| 0a5f3331 |
973 | |
| b640260a |
974 | const Int_t kNparTRD = 4; |
| 975 | Float_t parTRD[kNparTRD]; |
| 976 | const Int_t kNparBOX = 3; |
| 977 | Float_t parBOX[kNparBOX]; |
| 978 | const Int_t kNparTRP = 11; |
| 979 | Float_t parTRP[kNparTRP]; |
| 980 | |
| 0a5f3331 |
981 | // The rotation matrices |
| 7c0ec5ca |
982 | const Int_t kNmatrix = 7; |
| 0a5f3331 |
983 | Int_t matrix[kNmatrix]; |
| 984 | gMC->Matrix(matrix[0], 100.0, 0.0, 90.0, 90.0, 10.0, 0.0); |
| 985 | gMC->Matrix(matrix[1], 80.0, 0.0, 90.0, 90.0, 10.0, 180.0); |
| 986 | gMC->Matrix(matrix[2], 90.0, 0.0, 0.0, 0.0, 90.0, 90.0); |
| 987 | gMC->Matrix(matrix[3], 90.0, 180.0, 0.0, 180.0, 90.0, 90.0); |
| b640260a |
988 | gMC->Matrix(matrix[4], 170.0, 0.0, 80.0, 0.0, 90.0, 90.0); |
| 989 | gMC->Matrix(matrix[5], 170.0, 180.0, 80.0, 180.0, 90.0, 90.0); |
| 990 | gMC->Matrix(matrix[6], 180.0, 180.0, 90.0, 180.0, 90.0, 90.0); |
| 991 | |
| 992 | // |
| 993 | // The carbon inserts in the top/bottom aluminum plates |
| 994 | // |
| 995 | |
| 996 | const Int_t kNparCrb = 3; |
| 997 | Float_t parCrb[kNparCrb]; |
| 998 | parCrb[0] = 0.0; |
| 999 | parCrb[1] = 0.0; |
| 1000 | parCrb[2] = 0.0; |
| 053a5ea0 |
1001 | gMC->Gsvolu("USCR","BOX ",idtmed[1326-1],parCrb,0); |
| b640260a |
1002 | // Bottom 1 (all sectors) |
| 1003 | parCrb[0] = 77.49/2.0; |
| 1004 | parCrb[1] = 104.60/2.0; |
| 1005 | parCrb[2] = fgkSMpltT/2.0; |
| 1006 | xpos = 0.0; |
| 1007 | ypos = 0.0; |
| 1008 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1009 | gMC->Gsposp("USCR", 1,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1010 | gMC->Gsposp("USCR", 2,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1011 | gMC->Gsposp("USCR", 3,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1012 | // Bottom 2 (all sectors) |
| 1013 | parCrb[0] = 77.49/2.0; |
| 1014 | parCrb[1] = 55.80/2.0; |
| 1015 | parCrb[2] = fgkSMpltT/2.0; |
| 1016 | xpos = 0.0; |
| 1017 | ypos = 85.6; |
| 1018 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1019 | gMC->Gsposp("USCR", 4,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1020 | gMC->Gsposp("USCR", 5,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1021 | gMC->Gsposp("USCR", 6,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1022 | gMC->Gsposp("USCR", 7,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1023 | gMC->Gsposp("USCR", 8,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1024 | gMC->Gsposp("USCR", 9,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1025 | // Bottom 3 (all sectors) |
| 1026 | parCrb[0] = 77.49/2.0; |
| 1027 | parCrb[1] = 56.00/2.0; |
| 1028 | parCrb[2] = fgkSMpltT/2.0; |
| 1029 | xpos = 0.0; |
| 1030 | ypos = 148.5; |
| 1031 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1032 | gMC->Gsposp("USCR",10,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1033 | gMC->Gsposp("USCR",11,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1034 | gMC->Gsposp("USCR",12,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1035 | gMC->Gsposp("USCR",13,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1036 | gMC->Gsposp("USCR",14,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1037 | gMC->Gsposp("USCR",15,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1038 | // Bottom 4 (all sectors) |
| 1039 | parCrb[0] = 77.49/2.0; |
| 1040 | parCrb[1] = 118.00/2.0; |
| 1041 | parCrb[2] = fgkSMpltT/2.0; |
| 1042 | xpos = 0.0; |
| 1043 | ypos = 240.5; |
| 1044 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1045 | gMC->Gsposp("USCR",16,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1046 | gMC->Gsposp("USCR",17,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1047 | gMC->Gsposp("USCR",18,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1048 | gMC->Gsposp("USCR",19,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1049 | gMC->Gsposp("USCR",20,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1050 | gMC->Gsposp("USCR",21,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb); |
| 1051 | // Top 1 (only in front of PHOS) |
| 1052 | parCrb[0] = 111.48/2.0; |
| 1053 | parCrb[1] = 105.00/2.0; |
| 1054 | parCrb[2] = fgkSMpltT/2.0; |
| 1055 | xpos = 0.0; |
| 1056 | ypos = 0.0; |
| 1057 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1058 | gMC->Gsposp("USCR",22,"UTS2", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1059 | gMC->Gsposp("USCR",23,"UTS3", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1060 | // Top 2 (only in front of PHOS) |
| 1061 | parCrb[0] = 111.48/2.0; |
| 1062 | parCrb[1] = 56.00/2.0; |
| 1063 | parCrb[2] = fgkSMpltT/2.0; |
| 1064 | xpos = 0.0; |
| 1065 | ypos = 85.5; |
| 1066 | zpos = fgkSMpltT/2.0 - fgkSheight/2.0; |
| 1067 | gMC->Gsposp("USCR",24,"UTS2", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1068 | gMC->Gsposp("USCR",25,"UTS3", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1069 | gMC->Gsposp("USCR",26,"UTS2", xpos,-ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| 1070 | gMC->Gsposp("USCR",27,"UTS3", xpos,-ypos,-zpos,0,"ONLY",parCrb,kNparCrb); |
| bd0f8685 |
1071 | |
| 1072 | // |
| 1073 | // The chamber support rails |
| 1074 | // |
| 1075 | |
| 053a5ea0 |
1076 | const Float_t kSRLhgt = 2.00; |
| 1077 | const Float_t kSRLwidA = 2.3; |
| 1078 | const Float_t kSRLwidB = 1.947; |
| 1079 | const Float_t kSRLdst = 1.135; |
| 1080 | const Int_t kNparSRL = 11; |
| bd0f8685 |
1081 | Float_t parSRL[kNparSRL]; |
| 053a5ea0 |
1082 | // Trapezoidal shape |
| 1083 | parSRL[ 0] = fgkSlength/2.0; |
| 1084 | parSRL[ 1] = 0.0; |
| 1085 | parSRL[ 2] = 0.0; |
| 1086 | parSRL[ 3] = kSRLhgt /2.0; |
| 1087 | parSRL[ 4] = kSRLwidB /2.0; |
| 1088 | parSRL[ 5] = kSRLwidA /2.0; |
| 1089 | parSRL[ 6] = 5.0; |
| 1090 | parSRL[ 7] = kSRLhgt /2.0; |
| 1091 | parSRL[ 8] = kSRLwidB /2.0; |
| 1092 | parSRL[ 9] = kSRLwidA /2.0; |
| 1093 | parSRL[10] = 5.0; |
| 1094 | gMC->Gsvolu("USRL","TRAP",idtmed[1301-1],parSRL,kNparSRL); |
| bd0f8685 |
1095 | |
| 1096 | xpos = 0.0; |
| 1097 | ypos = 0.0; |
| 1098 | zpos = 0.0; |
| 053a5ea0 |
1099 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 225096c8 |
1100 | xpos = fgkCwidth[ilayer]/2.0 + kSRLwidA/2.0 + kSRLdst; |
| bd0f8685 |
1101 | ypos = 0.0; |
| 053a5ea0 |
1102 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos - fgkSheight/2.0 |
| 1103 | + fgkCraH + fgkCdrH - fgkCalH - kSRLhgt/2.0 |
| 053767a4 |
1104 | + ilayer * (fgkCH + fgkVspace); |
| 053a5ea0 |
1105 | gMC->Gspos("USRL",ilayer+1 ,"UTI1", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 1106 | gMC->Gspos("USRL",ilayer+1+ kNlayer,"UTI1",-xpos,ypos,zpos,matrix[3],"ONLY"); |
| 1107 | gMC->Gspos("USRL",ilayer+1+2*kNlayer,"UTI2", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 1108 | gMC->Gspos("USRL",ilayer+1+3*kNlayer,"UTI2",-xpos,ypos,zpos,matrix[3],"ONLY"); |
| 1109 | gMC->Gspos("USRL",ilayer+1+4*kNlayer,"UTI3", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 1110 | gMC->Gspos("USRL",ilayer+1+5*kNlayer,"UTI3",-xpos,ypos,zpos,matrix[3],"ONLY"); |
| bd0f8685 |
1111 | } |
| 1112 | |
| 1113 | // |
| 1114 | // The cross bars between the chambers |
| 1115 | // |
| 1116 | |
| 1117 | const Float_t kSCBwid = 1.0; |
| 0a5f3331 |
1118 | const Float_t kSCBthk = 2.0; |
| 1119 | const Float_t kSCHhgt = 0.3; |
| 1120 | |
| bd0f8685 |
1121 | const Int_t kNparSCB = 3; |
| 1122 | Float_t parSCB[kNparSCB]; |
| 030b4415 |
1123 | parSCB[1] = kSCBwid/2.0; |
| 0a5f3331 |
1124 | parSCB[2] = fgkCH /2.0 + fgkVspace/2.0 - kSCHhgt; |
| 1125 | |
| 1126 | const Int_t kNparSCI = 3; |
| 1127 | Float_t parSCI[kNparSCI]; |
| 1128 | parSCI[1] = -1; |
| bd0f8685 |
1129 | |
| 1130 | xpos = 0.0; |
| 1131 | ypos = 0.0; |
| 1132 | zpos = 0.0; |
| 053767a4 |
1133 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| bd0f8685 |
1134 | |
| 0a5f3331 |
1135 | // The aluminum of the cross bars |
| 225096c8 |
1136 | parSCB[0] = fgkCwidth[ilayer]/2.0 + kSRLdst/2.0; |
| 024c0422 |
1137 | snprintf(cTagV,kTag,"USF%01d",ilayer); |
| bd0f8685 |
1138 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parSCB,kNparSCB); |
| bd0f8685 |
1139 | |
| 0a5f3331 |
1140 | // The empty regions in the cross bars |
| 1141 | Float_t thkSCB = kSCBthk; |
| 053767a4 |
1142 | if (ilayer < 2) { |
| 0a5f3331 |
1143 | thkSCB *= 1.5; |
| 1144 | } |
| 1145 | parSCI[2] = parSCB[2] - thkSCB; |
| 1146 | parSCI[0] = parSCB[0]/4.0 - kSCBthk; |
| 024c0422 |
1147 | snprintf(cTagV,kTag,"USI%01d",ilayer); |
| 0a5f3331 |
1148 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parSCI,kNparSCI); |
| bd0f8685 |
1149 | |
| 024c0422 |
1150 | snprintf(cTagV,kTag,"USI%01d",ilayer); |
| 1151 | snprintf(cTagM,kTag,"USF%01d",ilayer); |
| 0a5f3331 |
1152 | ypos = 0.0; |
| 1153 | zpos = 0.0; |
| 1154 | xpos = parSCI[0] + thkSCB/2.0; |
| 1155 | gMC->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 1156 | xpos = - parSCI[0] - thkSCB/2.0; |
| 1157 | gMC->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 1158 | xpos = 3.0 * parSCI[0] + 1.5 * thkSCB; |
| 1159 | gMC->Gspos(cTagV,3,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 1160 | xpos = - 3.0 * parSCI[0] - 1.5 * thkSCB; |
| 1161 | gMC->Gspos(cTagV,4,cTagM,xpos,ypos,zpos,0,"ONLY"); |
| 1162 | |
| 024c0422 |
1163 | snprintf(cTagV,kTag,"USF%01d",ilayer); |
| bd0f8685 |
1164 | xpos = 0.0; |
| 0a5f3331 |
1165 | zpos = fgkVrocsm + fgkSMpltT + parSCB[2] - fgkSheight/2.0 |
| 053767a4 |
1166 | + ilayer * (fgkCH + fgkVspace); |
| 0a5f3331 |
1167 | |
| 225096c8 |
1168 | ypos = fgkClength[ilayer][2]/2.0 + fgkClength[ilayer][1]; |
| b640260a |
1169 | gMC->Gspos(cTagV, 1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 1170 | gMC->Gspos(cTagV, 3,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 1171 | gMC->Gspos(cTagV, 5,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
1172 | |
| 225096c8 |
1173 | ypos = - fgkClength[ilayer][2]/2.0 - fgkClength[ilayer][1]; |
| b640260a |
1174 | gMC->Gspos(cTagV, 2,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 1175 | gMC->Gspos(cTagV, 4,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 1176 | gMC->Gspos(cTagV, 6,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
1177 | |
| 1178 | } |
| 1179 | |
| 1180 | // |
| 1181 | // The horizontal connections between the cross bars |
| 1182 | // |
| 1183 | |
| 1184 | const Int_t kNparSCH = 3; |
| 1185 | Float_t parSCH[kNparSCH]; |
| 1186 | |
| 053767a4 |
1187 | for (ilayer = 1; ilayer < kNlayer-1; ilayer++) { |
| 0a5f3331 |
1188 | |
| 225096c8 |
1189 | parSCH[0] = fgkCwidth[ilayer]/2.0; |
| 1190 | parSCH[1] = (fgkClength[ilayer+1][2]/2.0 + fgkClength[ilayer+1][1] |
| 1191 | - fgkClength[ilayer ][2]/2.0 - fgkClength[ilayer ][1])/2.0; |
| 0a5f3331 |
1192 | parSCH[2] = kSCHhgt/2.0; |
| 1193 | |
| 024c0422 |
1194 | snprintf(cTagV,kTag,"USH%01d",ilayer); |
| 0a5f3331 |
1195 | gMC->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parSCH,kNparSCH); |
| bd0f8685 |
1196 | xpos = 0.0; |
| 225096c8 |
1197 | ypos = fgkClength[ilayer][2]/2.0 + fgkClength[ilayer][1] + parSCH[1]; |
| 0a5f3331 |
1198 | zpos = fgkVrocsm + fgkSMpltT - kSCHhgt/2.0 - fgkSheight/2.0 |
| 053767a4 |
1199 | + (ilayer+1) * (fgkCH + fgkVspace); |
| bd0f8685 |
1200 | gMC->Gspos(cTagV,1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| b640260a |
1201 | gMC->Gspos(cTagV,3,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 1202 | gMC->Gspos(cTagV,5,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
1203 | ypos = -ypos; |
| 1204 | gMC->Gspos(cTagV,2,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| b640260a |
1205 | gMC->Gspos(cTagV,4,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 1206 | gMC->Gspos(cTagV,6,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
1207 | |
| 1208 | } |
| 1209 | |
| b640260a |
1210 | // |
| 1211 | // The aymmetric flat frame in the middle |
| 1212 | // |
| 1213 | |
| 1214 | // The envelope volume (aluminum) |
| 1215 | parTRD[0] = 87.60/2.0; |
| 1216 | parTRD[1] = 114.00/2.0; |
| 1217 | parTRD[2] = 1.20/2.0; |
| 1218 | parTRD[3] = 71.30/2.0; |
| 1219 | gMC->Gsvolu("USDB","TRD1",idtmed[1301-1],parTRD,kNparTRD); |
| 1220 | // Empty spaces (air) |
| 1221 | parTRP[ 0] = 1.20/2.0; |
| 1222 | parTRP[ 1] = 0.0; |
| 1223 | parTRP[ 2] = 0.0; |
| 1224 | parTRP[ 3] = 27.00/2.0; |
| 1225 | parTRP[ 4] = 50.60/2.0; |
| 1226 | parTRP[ 5] = 5.00/2.0; |
| 1227 | parTRP[ 6] = 3.5; |
| 1228 | parTRP[ 7] = 27.00/2.0; |
| 1229 | parTRP[ 8] = 50.60/2.0; |
| 1230 | parTRP[ 9] = 5.00/2.0; |
| 1231 | parTRP[10] = 3.5; |
| 1232 | gMC->Gsvolu("USD1","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1233 | xpos = 18.0; |
| 1234 | ypos = 0.0; |
| 1235 | zpos = 27.00/2.0 - 71.3/2.0; |
| 1236 | gMC->Gspos("USD1",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1237 | // Empty spaces (air) |
| 1238 | parTRP[ 0] = 1.20/2.0; |
| 1239 | parTRP[ 1] = 0.0; |
| 1240 | parTRP[ 2] = 0.0; |
| 1241 | parTRP[ 3] = 33.00/2.0; |
| 1242 | parTRP[ 4] = 5.00/2.0; |
| 1243 | parTRP[ 5] = 62.10/2.0; |
| 1244 | parTRP[ 6] = 3.5; |
| 1245 | parTRP[ 7] = 33.00/2.0; |
| 1246 | parTRP[ 8] = 5.00/2.0; |
| 1247 | parTRP[ 9] = 62.10/2.0; |
| 1248 | parTRP[10] = 3.5; |
| 1249 | gMC->Gsvolu("USD2","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1250 | xpos = 21.0; |
| 1251 | ypos = 0.0; |
| 1252 | zpos = 71.3/2.0 - 33.0/2.0; |
| 1253 | gMC->Gspos("USD2",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1254 | // Empty spaces (air) |
| 1255 | parBOX[ 0] = 22.50/2.0; |
| 1256 | parBOX[ 1] = 1.20/2.0; |
| 1257 | parBOX[ 2] = 70.50/2.0; |
| 1258 | gMC->Gsvolu("USD3","BOX ",idtmed[1302-1],parBOX,kNparBOX); |
| 1259 | xpos = -25.75; |
| 1260 | ypos = 0.0; |
| 1261 | zpos = 0.4; |
| 1262 | gMC->Gspos("USD3",1,"USDB", xpos, ypos, zpos, 0,"ONLY"); |
| 1263 | // Empty spaces (air) |
| 1264 | parTRP[ 0] = 1.20/2.0; |
| 1265 | parTRP[ 1] = 0.0; |
| 1266 | parTRP[ 2] = 0.0; |
| 1267 | parTRP[ 3] = 25.50/2.0; |
| 1268 | parTRP[ 4] = 5.00/2.0; |
| 1269 | parTRP[ 5] = 65.00/2.0; |
| 1270 | parTRP[ 6] = -1.0; |
| 1271 | parTRP[ 7] = 25.50/2.0; |
| 1272 | parTRP[ 8] = 5.00/2.0; |
| 1273 | parTRP[ 9] = 65.00/2.0; |
| 1274 | parTRP[10] = -1.0; |
| 1275 | gMC->Gsvolu("USD4","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1276 | xpos = 2.0; |
| 1277 | ypos = 0.0; |
| 1278 | zpos = -1.6; |
| 1279 | gMC->Gspos("USD4",1,"USDB", xpos, ypos, zpos,matrix[6],"ONLY"); |
| 1280 | // Empty spaces (air) |
| 1281 | parTRP[ 0] = 1.20/2.0; |
| 1282 | parTRP[ 1] = 0.0; |
| 1283 | parTRP[ 2] = 0.0; |
| 1284 | parTRP[ 3] = 23.50/2.0; |
| 1285 | parTRP[ 4] = 63.50/2.0; |
| 1286 | parTRP[ 5] = 5.00/2.0; |
| 1287 | parTRP[ 6] = 16.0; |
| 1288 | parTRP[ 7] = 23.50/2.0; |
| 1289 | parTRP[ 8] = 63.50/2.0; |
| 1290 | parTRP[ 9] = 5.00/2.0; |
| 1291 | parTRP[10] = 16.0; |
| 1292 | gMC->Gsvolu("USD5","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1293 | xpos = 36.5; |
| 1294 | ypos = 0.0; |
| 1295 | zpos = -1.5; |
| 1296 | gMC->Gspos("USD5",1,"USDB", xpos, ypos, zpos,matrix[5],"ONLY"); |
| 1297 | // Empty spaces (air) |
| 1298 | parTRP[ 0] = 1.20/2.0; |
| 1299 | parTRP[ 1] = 0.0; |
| 1300 | parTRP[ 2] = 0.0; |
| 1301 | parTRP[ 3] = 70.50/2.0; |
| 1302 | parTRP[ 4] = 4.50/2.0; |
| 1303 | parTRP[ 5] = 16.50/2.0; |
| 1304 | parTRP[ 6] = -5.0; |
| 1305 | parTRP[ 7] = 70.50/2.0; |
| 1306 | parTRP[ 8] = 4.50/2.0; |
| 1307 | parTRP[ 9] = 16.50/2.0; |
| 1308 | parTRP[10] = -5.0; |
| 1309 | gMC->Gsvolu("USD6","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1310 | xpos = -43.7; |
| 1311 | ypos = 0.0; |
| 1312 | zpos = 0.4; |
| 1313 | gMC->Gspos("USD6",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1314 | xpos = 0.0; |
| 225096c8 |
1315 | ypos = fgkClength[5][2]/2.0; |
| 1e9dad22 |
1316 | zpos = 0.04; |
| b640260a |
1317 | gMC->Gspos("USDB",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1318 | gMC->Gspos("USDB",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1319 | gMC->Gspos("USDB",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1320 | gMC->Gspos("USDB",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1321 | gMC->Gspos("USDB",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1322 | gMC->Gspos("USDB",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1323 | // Upper bar (aluminum) |
| 1324 | parBOX[0] = 95.00/2.0; |
| 1325 | parBOX[1] = 1.20/2.0; |
| 1326 | parBOX[2] = 3.00/2.0; |
| 1327 | gMC->Gsvolu("USD7","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1328 | xpos = 0.0; |
| 225096c8 |
1329 | ypos = fgkClength[5][2]/2.0; |
| 83dd8891 |
1330 | zpos = fgkSheight/2.0 - fgkSMpltT - 3.00/2.0; |
| b640260a |
1331 | gMC->Gspos("USD7",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1332 | gMC->Gspos("USD7",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1333 | gMC->Gspos("USD7",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1334 | gMC->Gspos("USD7",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1335 | gMC->Gspos("USD7",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1336 | gMC->Gspos("USD7",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1337 | // Lower bar (aluminum) |
| 1338 | parBOX[0] = 90.22/2.0; |
| 1339 | parBOX[1] = 1.20/2.0; |
| 9e020f1e |
1340 | parBOX[2] = 1.74/2.0; |
| b640260a |
1341 | gMC->Gsvolu("USD8","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1342 | xpos = 0.0; |
| 225096c8 |
1343 | ypos = fgkClength[5][2]/2.0 - 0.1; |
| 9e020f1e |
1344 | zpos = -fgkSheight/2.0 + fgkSMpltT + 2.27; |
| b640260a |
1345 | gMC->Gspos("USD8",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1346 | gMC->Gspos("USD8",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1347 | gMC->Gspos("USD8",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1348 | gMC->Gspos("USD8",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1349 | gMC->Gspos("USD8",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1350 | gMC->Gspos("USD8",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1351 | // Lower bar (aluminum) |
| 1352 | parBOX[0] = 82.60/2.0; |
| 1353 | parBOX[1] = 1.20/2.0; |
| 1354 | parBOX[2] = 1.40/2.0; |
| 1355 | gMC->Gsvolu("USD9","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1356 | xpos = 0.0; |
| 225096c8 |
1357 | ypos = fgkClength[5][2]/2.0; |
| 83dd8891 |
1358 | zpos = -fgkSheight/2.0 + fgkSMpltT + 1.40/2.0; |
| b640260a |
1359 | gMC->Gspos("USD9",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1360 | gMC->Gspos("USD9",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1361 | gMC->Gspos("USD9",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1362 | gMC->Gspos("USD9",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1363 | gMC->Gspos("USD9",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1364 | gMC->Gspos("USD9",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1365 | // Front sheet (aluminum) |
| 1366 | parTRP[ 0] = 0.10/2.0; |
| 1367 | parTRP[ 1] = 0.0; |
| 1368 | parTRP[ 2] = 0.0; |
| 1369 | parTRP[ 3] = 74.50/2.0; |
| 1370 | parTRP[ 4] = 31.70/2.0; |
| 1371 | parTRP[ 5] = 44.00/2.0; |
| 1372 | parTRP[ 6] = -5.0; |
| 1373 | parTRP[ 7] = 74.50/2.0; |
| 1374 | parTRP[ 8] = 31.70/2.0; |
| 1375 | parTRP[ 9] = 44.00/2.0; |
| 1376 | parTRP[10] = -5.0; |
| 1377 | gMC->Gsvolu("USDF","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1378 | xpos = -32.0; |
| 225096c8 |
1379 | ypos = fgkClength[5][2]/2.0 + 1.20/2.0 + 0.10/2.0; |
| b640260a |
1380 | zpos = 0.0; |
| 1381 | gMC->Gspos("USDF",1,"UTI1", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1382 | gMC->Gspos("USDF",2,"UTI1", xpos,-ypos, zpos,matrix[2],"ONLY"); |
| 1383 | gMC->Gspos("USDF",3,"UTI2", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1384 | gMC->Gspos("USDF",4,"UTI2", xpos,-ypos, zpos,matrix[2],"ONLY"); |
| 1385 | gMC->Gspos("USDF",5,"UTI3", xpos, ypos, zpos,matrix[2],"ONLY"); |
| 1386 | gMC->Gspos("USDF",6,"UTI3", xpos,-ypos, zpos,matrix[2],"ONLY"); |
| 1387 | |
| 1388 | // |
| 1389 | // The flat frame in front of the chambers |
| 1390 | // |
| 1391 | |
| 1392 | // The envelope volume (aluminum) |
| 24eb93fd |
1393 | parTRD[0] = 90.00/2.0 - 0.1; |
| 1394 | parTRD[1] = 114.00/2.0 - 0.1; |
| b640260a |
1395 | parTRD[2] = 1.50/2.0; |
| 1396 | parTRD[3] = 70.30/2.0; |
| 1397 | gMC->Gsvolu("USCB","TRD1",idtmed[1301-1],parTRD,kNparTRD); |
| 1398 | // Empty spaces (air) |
| 1399 | parTRD[0] = 87.00/2.0; |
| 1400 | parTRD[1] = 10.00/2.0; |
| 1401 | parTRD[2] = 1.50/2.0; |
| 1402 | parTRD[3] = 26.35/2.0; |
| 1403 | gMC->Gsvolu("USC1","TRD1",idtmed[1302-1],parTRD,kNparTRD); |
| 1404 | xpos = 0.0; |
| 1405 | ypos = 0.0; |
| 1406 | zpos = 26.35/2.0 - 70.3/2.0; |
| 1407 | gMC->Gspos("USC1",1,"USCB",xpos,ypos,zpos,0,"ONLY"); |
| 1408 | // Empty spaces (air) |
| 1409 | parTRD[0] = 10.00/2.0; |
| 1410 | parTRD[1] = 111.00/2.0; |
| 1411 | parTRD[2] = 1.50/2.0; |
| 1412 | parTRD[3] = 35.05/2.0; |
| 1413 | gMC->Gsvolu("USC2","TRD1",idtmed[1302-1],parTRD,kNparTRD); |
| 1414 | xpos = 0.0; |
| 1415 | ypos = 0.0; |
| 1416 | zpos = 70.3/2.0 - 35.05/2.0; |
| 1417 | gMC->Gspos("USC2",1,"USCB",xpos,ypos,zpos,0,"ONLY"); |
| 1418 | // Empty spaces (air) |
| 1419 | parTRP[ 0] = 1.50/2.0; |
| 1420 | parTRP[ 1] = 0.0; |
| 1421 | parTRP[ 2] = 0.0; |
| 1422 | parTRP[ 3] = 37.60/2.0; |
| 1423 | parTRP[ 4] = 63.90/2.0; |
| 1424 | parTRP[ 5] = 8.86/2.0; |
| 1425 | parTRP[ 6] = 16.0; |
| 1426 | parTRP[ 7] = 37.60/2.0; |
| 1427 | parTRP[ 8] = 63.90/2.0; |
| 1428 | parTRP[ 9] = 8.86/2.0; |
| 1429 | parTRP[10] = 16.0; |
| 1430 | gMC->Gsvolu("USC3","TRAP",idtmed[1302-1],parTRP,kNparTRP); |
| 1431 | xpos = -30.5; |
| 1432 | ypos = 0.0; |
| 1433 | zpos = -2.0; |
| 1434 | gMC->Gspos("USC3",1,"USCB", xpos, ypos, zpos,matrix[4],"ONLY"); |
| 1435 | gMC->Gspos("USC3",2,"USCB",-xpos, ypos, zpos,matrix[5],"ONLY"); |
| 1436 | xpos = 0.0; |
| 225096c8 |
1437 | ypos = fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0]; |
| b640260a |
1438 | zpos = 0.0; |
| 1439 | gMC->Gspos("USCB",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1440 | gMC->Gspos("USCB",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1441 | gMC->Gspos("USCB",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1442 | gMC->Gspos("USCB",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1443 | gMC->Gspos("USCB",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1444 | gMC->Gspos("USCB",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1445 | // Upper bar (aluminum) |
| 1446 | parBOX[0] = 95.00/2.0; |
| 1447 | parBOX[1] = 1.50/2.0; |
| 1448 | parBOX[2] = 3.00/2.0; |
| 1449 | gMC->Gsvolu("USC4","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1450 | xpos = 0.0; |
| 225096c8 |
1451 | ypos = fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0]; |
| 83dd8891 |
1452 | zpos = fgkSheight/2.0 - fgkSMpltT - 3.00/2.0; |
| b640260a |
1453 | gMC->Gspos("USC4",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1454 | gMC->Gspos("USC4",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1455 | gMC->Gspos("USC4",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1456 | gMC->Gspos("USC4",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1457 | gMC->Gspos("USC4",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1458 | gMC->Gspos("USC4",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1459 | // Lower bar (aluminum) |
| 1460 | parBOX[0] = 90.22/2.0; |
| 1461 | parBOX[1] = 1.50/2.0; |
| 9e020f1e |
1462 | parBOX[2] = 2.00/2.0; |
| b640260a |
1463 | gMC->Gsvolu("USC5","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1464 | xpos = 0.0; |
| 225096c8 |
1465 | ypos = fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0]; |
| 9e020f1e |
1466 | zpos = -fgkSheight/2.0 + fgkSMpltT + 2.60; |
| b640260a |
1467 | gMC->Gspos("USC5",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1468 | gMC->Gspos("USC5",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1469 | gMC->Gspos("USC5",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1470 | gMC->Gspos("USC5",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1471 | gMC->Gspos("USC5",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1472 | gMC->Gspos("USC5",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1473 | // Lower bar (aluminum) |
| 1474 | parBOX[0] = 82.60/2.0; |
| 1475 | parBOX[1] = 1.50/2.0; |
| 1476 | parBOX[2] = 1.60/2.0; |
| 1477 | gMC->Gsvolu("USC6","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1478 | xpos = 0.0; |
| 225096c8 |
1479 | ypos = fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0]; |
| 83dd8891 |
1480 | zpos = -fgkSheight/2.0 + fgkSMpltT + 1.60/2.0; |
| b640260a |
1481 | gMC->Gspos("USC6",1,"UTI1", xpos, ypos, zpos, 0,"ONLY"); |
| 1482 | gMC->Gspos("USC6",2,"UTI1", xpos,-ypos, zpos, 0,"ONLY"); |
| 1483 | gMC->Gspos("USC6",3,"UTI2", xpos, ypos, zpos, 0,"ONLY"); |
| 1484 | gMC->Gspos("USC6",4,"UTI2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1485 | gMC->Gspos("USC6",5,"UTI3", xpos, ypos, zpos, 0,"ONLY"); |
| 1486 | gMC->Gspos("USC6",6,"UTI3", xpos,-ypos, zpos, 0,"ONLY"); |
| 1487 | |
| 0a5f3331 |
1488 | // |
| 1489 | // The long corner ledges |
| 1490 | // |
| 1491 | |
| 1492 | const Int_t kNparSCL = 3; |
| 1493 | Float_t parSCL[kNparSCL]; |
| 1494 | const Int_t kNparSCLb = 11; |
| 1495 | Float_t parSCLb[kNparSCLb]; |
| 1496 | |
| 1497 | // Upper ledges |
| 1498 | // Thickness of the corner ledges |
| 1499 | const Float_t kSCLthkUa = 0.6; |
| 1500 | const Float_t kSCLthkUb = 0.6; |
| 1501 | // Width of the corner ledges |
| 1502 | const Float_t kSCLwidUa = 3.2; |
| 1503 | const Float_t kSCLwidUb = 4.8; |
| 1504 | // Position of the corner ledges |
| 1505 | const Float_t kSCLposxUa = 0.7; |
| 1506 | const Float_t kSCLposxUb = 3.3; |
| dc9d308d |
1507 | const Float_t kSCLposzUa = 1.65; |
| 0a5f3331 |
1508 | const Float_t kSCLposzUb = 0.3; |
| 1509 | // Vertical |
| 1510 | parSCL[0] = kSCLthkUa /2.0; |
| 1511 | parSCL[1] = fgkSlength/2.0; |
| 1512 | parSCL[2] = kSCLwidUa /2.0; |
| 1513 | gMC->Gsvolu("USL1","BOX ",idtmed[1301-1],parSCL,kNparSCL); |
| 1514 | xpos = fgkSwidth2/2.0 - fgkSMpltT - kSCLposxUa; |
| 1515 | ypos = 0.0; |
| 1516 | zpos = fgkSheight/2.0 - fgkSMpltT - kSCLposzUa; |
| 1517 | gMC->Gspos("USL1",1,"UTI1", xpos,ypos,zpos,matrix[0],"ONLY"); |
| 1518 | xpos = -xpos; |
| 1519 | gMC->Gspos("USL1",2,"UTI1", xpos,ypos,zpos,matrix[1],"ONLY"); |
| 1520 | // Horizontal |
| 1521 | parSCL[0] = kSCLwidUb /2.0; |
| 1522 | parSCL[1] = fgkSlength/2.0; |
| 1523 | parSCL[2] = kSCLthkUb /2.0; |
| 1524 | gMC->Gsvolu("USL2","BOX ",idtmed[1301-1],parSCL,kNparSCL); |
| 1525 | xpos = fgkSwidth2/2.0 - fgkSMpltT - kSCLposxUb; |
| 1526 | ypos = 0.0; |
| 1527 | zpos = fgkSheight/2.0 - fgkSMpltT - kSCLposzUb; |
| 1528 | gMC->Gspos("USL2",1,"UTI1", xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
1529 | gMC->Gspos("USL2",3,"UTI2", xpos,ypos,zpos, 0,"ONLY"); |
| 1530 | gMC->Gspos("USL2",5,"UTI3", xpos,ypos,zpos, 0,"ONLY"); |
| 0a5f3331 |
1531 | xpos = -xpos; |
| 1532 | gMC->Gspos("USL2",2,"UTI1", xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
1533 | gMC->Gspos("USL2",4,"UTI2", xpos,ypos,zpos, 0,"ONLY"); |
| 1534 | gMC->Gspos("USL2",6,"UTI3", xpos,ypos,zpos, 0,"ONLY"); |
| 0a5f3331 |
1535 | |
| 1536 | // Lower ledges |
| 1537 | // Thickness of the corner ledges |
| 1538 | const Float_t kSCLthkLa = 2.464; |
| 1539 | const Float_t kSCLthkLb = 1.0; |
| 1540 | // Width of the corner ledges |
| 053a5ea0 |
1541 | const Float_t kSCLwidLa = 8.3; |
| 1542 | const Float_t kSCLwidLb = 4.0; |
| 0a5f3331 |
1543 | // Position of the corner ledges |
| 053a5ea0 |
1544 | const Float_t kSCLposxLa = (3.0 * kSCLthkLb - kSCLthkLa) / 4.0 + 0.05; |
| 1545 | const Float_t kSCLposxLb = kSCLthkLb + kSCLwidLb/2.0 + 0.05; |
| 1546 | const Float_t kSCLposzLa = kSCLwidLa/2.0; |
| 1547 | const Float_t kSCLposzLb = kSCLthkLb/2.0; |
| 0a5f3331 |
1548 | // Vertical |
| 1549 | // Trapezoidal shape |
| 1550 | parSCLb[ 0] = fgkSlength/2.0; |
| 1551 | parSCLb[ 1] = 0.0; |
| 1552 | parSCLb[ 2] = 0.0; |
| 1553 | parSCLb[ 3] = kSCLwidLa /2.0; |
| 1554 | parSCLb[ 4] = kSCLthkLb /2.0; |
| 1555 | parSCLb[ 5] = kSCLthkLa /2.0; |
| 1556 | parSCLb[ 6] = 5.0; |
| 1557 | parSCLb[ 7] = kSCLwidLa /2.0; |
| 1558 | parSCLb[ 8] = kSCLthkLb /2.0; |
| 1559 | parSCLb[ 9] = kSCLthkLa /2.0; |
| 1560 | parSCLb[10] = 5.0; |
| 1561 | gMC->Gsvolu("USL3","TRAP",idtmed[1301-1],parSCLb,kNparSCLb); |
| 1562 | xpos = fgkSwidth1/2.0 - fgkSMpltT - kSCLposxLa; |
| 1563 | ypos = 0.0; |
| 053a5ea0 |
1564 | zpos = - fgkSheight/2.0 + fgkSMpltT + kSCLposzLa; |
| 0a5f3331 |
1565 | gMC->Gspos("USL3",1,"UTI1", xpos,ypos,zpos,matrix[2],"ONLY"); |
| b640260a |
1566 | gMC->Gspos("USL3",3,"UTI2", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 1567 | gMC->Gspos("USL3",5,"UTI3", xpos,ypos,zpos,matrix[2],"ONLY"); |
| 0a5f3331 |
1568 | xpos = -xpos; |
| 1569 | gMC->Gspos("USL3",2,"UTI1", xpos,ypos,zpos,matrix[3],"ONLY"); |
| b640260a |
1570 | gMC->Gspos("USL3",4,"UTI2", xpos,ypos,zpos,matrix[3],"ONLY"); |
| 1571 | gMC->Gspos("USL3",6,"UTI3", xpos,ypos,zpos,matrix[3],"ONLY"); |
| 053a5ea0 |
1572 | // Horizontal part |
| 0a5f3331 |
1573 | parSCL[0] = kSCLwidLb /2.0; |
| 1574 | parSCL[1] = fgkSlength/2.0; |
| 1575 | parSCL[2] = kSCLthkLb /2.0; |
| 1576 | gMC->Gsvolu("USL4","BOX ",idtmed[1301-1],parSCL,kNparSCL); |
| 1577 | xpos = fgkSwidth1/2.0 - fgkSMpltT - kSCLposxLb; |
| 1578 | ypos = 0.0; |
| 053a5ea0 |
1579 | zpos = - fgkSheight/2.0 + fgkSMpltT + kSCLposzLb; |
| 0a5f3331 |
1580 | gMC->Gspos("USL4",1,"UTI1", xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
1581 | gMC->Gspos("USL4",3,"UTI2", xpos,ypos,zpos, 0,"ONLY"); |
| 1582 | gMC->Gspos("USL4",5,"UTI3", xpos,ypos,zpos, 0,"ONLY"); |
| 0a5f3331 |
1583 | xpos = -xpos; |
| 1584 | gMC->Gspos("USL4",2,"UTI1", xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
1585 | gMC->Gspos("USL4",4,"UTI2", xpos,ypos,zpos, 0,"ONLY"); |
| 1586 | gMC->Gspos("USL4",6,"UTI3", xpos,ypos,zpos, 0,"ONLY"); |
| 1587 | |
| 1588 | // |
| 1589 | // Aluminum plates in the front part of the super modules |
| 1590 | // |
| 1591 | |
| 1592 | const Int_t kNparTrd = 4; |
| 1593 | Float_t parTrd[kNparTrd]; |
| 1594 | parTrd[0] = fgkSwidth1/2.0 - 2.5; |
| 1595 | parTrd[1] = fgkSwidth2/2.0 - 2.5; |
| 1596 | parTrd[2] = fgkSMpltT /2.0; |
| 1597 | parTrd[3] = fgkSheight/2.0 - 1.0; |
| 1598 | gMC->Gsvolu("UTA1","TRD1",idtmed[1301-1],parTrd,kNparTrd); |
| 1599 | xpos = 0.0; |
| 1600 | ypos = fgkSMpltT/2.0 - fgkFlength/2.0; |
| 1601 | zpos = -0.5; |
| 1602 | gMC->Gspos("UTA1",1,"UTF1",xpos, ypos,zpos, 0,"ONLY"); |
| 1603 | gMC->Gspos("UTA1",2,"UTF2",xpos,-ypos,zpos, 0,"ONLY"); |
| 1604 | |
| 1605 | const Int_t kNparPlt = 3; |
| 1606 | Float_t parPlt[kNparPlt]; |
| 1607 | parPlt[0] = 0.0; |
| 1608 | parPlt[1] = 0.0; |
| 1609 | parPlt[2] = 0.0; |
| 1610 | gMC->Gsvolu("UTA2","BOX ",idtmed[1301-1],parPlt,0); |
| 1611 | xpos = 0.0; |
| 1612 | ypos = 0.0; |
| 1613 | zpos = fgkSheight/2.0 - fgkSMpltT/2.0; |
| dc9d308d |
1614 | parPlt[0] = fgkSwidth2/2.0 - 0.2; |
| b640260a |
1615 | parPlt[1] = fgkFlength/2.0; |
| 1616 | parPlt[2] = fgkSMpltT /2.0; |
| 1617 | gMC->Gsposp("UTA2",1,"UTF2",xpos,ypos,zpos |
| 1618 | , 0,"ONLY",parPlt,kNparPlt); |
| babcf76e |
1619 | xpos = (fgkSwidth1 + fgkSwidth2)/4.0 - fgkSMpltT/2.0 - 0.0016; |
| b640260a |
1620 | ypos = 0.0; |
| 1621 | zpos = 0.0; |
| 1622 | parPlt[0] = fgkSMpltT /2.0; |
| 1623 | parPlt[1] = fgkFlength/2.0; |
| 1624 | parPlt[2] = fgkSheight/2.0; |
| 1625 | gMC->Gsposp("UTA2",2,"UTF2", xpos,ypos,zpos |
| 1626 | ,matrix[0],"ONLY",parPlt,kNparPlt); |
| 1627 | gMC->Gsposp("UTA2",3,"UTF2",-xpos,ypos,zpos |
| 1628 | ,matrix[1],"ONLY",parPlt,kNparPlt); |
| 0a5f3331 |
1629 | |
| 9bf8c575 |
1630 | // Additional aluminum bar |
| 1631 | parBOX[0] = 80.0/2.0; |
| 1632 | parBOX[1] = 1.0/2.0; |
| 1633 | parBOX[2] = 10.0/2.0; |
| 1634 | gMC->Gsvolu("UTA3","BOX ",idtmed[1301-1],parBOX,kNparBOX); |
| 1635 | xpos = 0.0; |
| 1636 | ypos = 1.0/2.0 + fgkSMpltT - fgkFlength/2.0; |
| 1637 | zpos = fgkSheight/2.0 - 1.5 - 10.0/2.0; |
| 1638 | gMC->Gspos("UTA3",1,"UTF1", xpos, ypos, zpos, 0,"ONLY"); |
| 1639 | gMC->Gspos("UTA3",2,"UTF2", xpos,-ypos, zpos, 0,"ONLY"); |
| 1640 | |
| bd0f8685 |
1641 | } |
| 1642 | |
| 1643 | //_____________________________________________________________________________ |
| 1644 | void AliTRDgeometry::CreateServices(Int_t *idtmed) |
| 1645 | { |
| 1646 | // |
| 1647 | // Create the geometry of the services |
| 1648 | // |
| 1649 | // Names of the TRD services volumina |
| 1650 | // |
| b640260a |
1651 | // UTC1 Cooling arterias (Al) |
| 1652 | // UTC2 Cooling arterias (Water) |
| bd0f8685 |
1653 | // UUxx Volumes for the services at the chambers (Air) |
| 053a5ea0 |
1654 | // UMCM Readout MCMs (G10/Cu/Si) |
| 1655 | // UDCS DCSs boards (G10/Cu) |
| b640260a |
1656 | // UTP1 Power bars (Cu) |
| 0a5f3331 |
1657 | // UTCP Cooling pipes (Fe) |
| bd0f8685 |
1658 | // UTCH Cooling pipes (Water) |
| 1659 | // UTPL Power lines (Cu) |
| b640260a |
1660 | // UTGD Gas distribution box (V2A) |
| bd0f8685 |
1661 | // |
| 1662 | |
| 053767a4 |
1663 | Int_t ilayer = 0; |
| 1664 | Int_t istack = 0; |
| bd0f8685 |
1665 | |
| 1666 | Float_t xpos = 0.0; |
| 1667 | Float_t ypos = 0.0; |
| 1668 | Float_t zpos = 0.0; |
| 1669 | |
| 024c0422 |
1670 | const Int_t kTag = 100; |
| 1671 | Char_t cTagV[kTag]; |
| bd0f8685 |
1672 | |
| b640260a |
1673 | const Int_t kNparBox = 3; |
| 1674 | Float_t parBox[kNparBox]; |
| 1675 | |
| 1676 | const Int_t kNparTube = 3; |
| 1677 | Float_t parTube[kNparTube]; |
| 1678 | |
| 10df4d39 |
1679 | // Services inside the baby frame |
| 1680 | const Float_t kBBMdz = 223.0; |
| 1681 | const Float_t kBBSdz = 8.5; |
| 1682 | |
| 1683 | // Services inside the back frame |
| 1684 | const Float_t kBFMdz = 118.0; |
| 1685 | const Float_t kBFSdz = 8.5; |
| 1686 | |
| bd0f8685 |
1687 | // The rotation matrices |
| 10df4d39 |
1688 | const Int_t kNmatrix = 10; |
| bd0f8685 |
1689 | Int_t matrix[kNmatrix]; |
| 10df4d39 |
1690 | gMC->Matrix(matrix[0], 100.0, 0.0, 90.0, 90.0, 10.0, 0.0); // rotation around y-axis |
| 1691 | gMC->Matrix(matrix[1], 80.0, 0.0, 90.0, 90.0, 10.0, 180.0); // rotation around y-axis |
| 030b4415 |
1692 | gMC->Matrix(matrix[2], 0.0, 0.0, 90.0, 90.0, 90.0, 0.0); |
| 99ed5146 |
1693 | gMC->Matrix(matrix[3], 180.0, 0.0, 90.0, 90.0, 90.0, 180.0); |
| b640260a |
1694 | gMC->Matrix(matrix[4], 90.0, 0.0, 0.0, 0.0, 90.0, 90.0); |
| 1695 | gMC->Matrix(matrix[5], 100.0, 0.0, 90.0, 270.0, 10.0, 0.0); |
| 1696 | gMC->Matrix(matrix[6], 80.0, 0.0, 90.0, 270.0, 10.0, 180.0); |
| 10df4d39 |
1697 | gMC->Matrix(matrix[7], 90.0, 10.0, 90.0, 100.0, 0.0, 0.0); // rotation around z-axis |
| 1698 | gMC->Matrix(matrix[8], 90.0, 350.0, 90.0, 80.0, 0.0, 0.0); // rotation around z-axis |
| 1699 | gMC->Matrix(matrix[9], 90.0, 90.0, 90.0, 180.0, 0.0, 0.0); // rotation around z-axis |
| bd0f8685 |
1700 | |
| 1701 | // |
| 1702 | // The cooling arterias |
| 1703 | // |
| 1704 | |
| 1705 | // Width of the cooling arterias |
| 0a5f3331 |
1706 | const Float_t kCOLwid = 0.8; |
| bd0f8685 |
1707 | // Height of the cooling arterias |
| 0a5f3331 |
1708 | const Float_t kCOLhgt = 6.5; |
| bd0f8685 |
1709 | // Positioning of the cooling |
| 053a5ea0 |
1710 | const Float_t kCOLposx = 1.0; |
| 1711 | const Float_t kCOLposz = -1.2; |
| bd0f8685 |
1712 | // Thickness of the walls of the cooling arterias |
| 1713 | const Float_t kCOLthk = 0.1; |
| 030b4415 |
1714 | const Int_t kNparCOL = 3; |
| bd0f8685 |
1715 | Float_t parCOL[kNparCOL]; |
| b640260a |
1716 | parCOL[0] = 0.0; |
| 1717 | parCOL[1] = 0.0; |
| 1718 | parCOL[2] = 0.0; |
| 1719 | gMC->Gsvolu("UTC1","BOX ",idtmed[1308-1],parCOL,0); |
| 1720 | gMC->Gsvolu("UTC3","BOX ",idtmed[1308-1],parCOL,0); |
| 1721 | parCOL[0] = kCOLwid/2.0 - kCOLthk; |
| 1722 | parCOL[1] = -1.0; |
| 1723 | parCOL[2] = kCOLhgt/2.0 - kCOLthk; |
| 1724 | gMC->Gsvolu("UTC2","BOX ",idtmed[1314-1],parCOL,kNparCOL); |
| 1725 | gMC->Gsvolu("UTC4","BOX ",idtmed[1314-1],parCOL,kNparCOL); |
| bd0f8685 |
1726 | |
| 1727 | xpos = 0.0; |
| 1728 | ypos = 0.0; |
| 1729 | zpos = 0.0; |
| b640260a |
1730 | gMC->Gspos("UTC2",1,"UTC1", xpos,ypos,zpos,0,"ONLY"); |
| 1731 | gMC->Gspos("UTC4",1,"UTC3", xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
1732 | |
| 053767a4 |
1733 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 99ed5146 |
1734 | |
| b640260a |
1735 | // Along the chambers |
| 225096c8 |
1736 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx; |
| b640260a |
1737 | ypos = 0.0; |
| 053a5ea0 |
1738 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1739 | + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
| 053767a4 |
1740 | + ilayer * (fgkCH + fgkVspace); |
| b640260a |
1741 | parCOL[0] = kCOLwid /2.0; |
| 1742 | parCOL[1] = fgkSlength/2.0; |
| 1743 | parCOL[2] = kCOLhgt /2.0; |
| 053767a4 |
1744 | gMC->Gsposp("UTC1",ilayer ,"UTI1", xpos,ypos,zpos |
| b640260a |
1745 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1746 | gMC->Gsposp("UTC1",ilayer+ kNlayer,"UTI1",-xpos,ypos,zpos |
| b640260a |
1747 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1748 | gMC->Gsposp("UTC1",ilayer+6*kNlayer,"UTI2", xpos,ypos,zpos |
| b640260a |
1749 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1750 | gMC->Gsposp("UTC1",ilayer+7*kNlayer,"UTI2",-xpos,ypos,zpos |
| b640260a |
1751 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1752 | gMC->Gsposp("UTC1",ilayer+8*kNlayer ,"UTI3", xpos,ypos,zpos |
| b640260a |
1753 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1754 | gMC->Gsposp("UTC1",ilayer+9*kNlayer,"UTI3",-xpos,ypos,zpos |
| b640260a |
1755 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 1756 | |
| 1757 | // Front of supermodules |
| 225096c8 |
1758 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx; |
| b640260a |
1759 | ypos = 0.0; |
| 053a5ea0 |
1760 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1761 | + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
| 053767a4 |
1762 | + ilayer * (fgkCH + fgkVspace); |
| b640260a |
1763 | parCOL[0] = kCOLwid /2.0; |
| 1764 | parCOL[1] = fgkFlength/2.0; |
| 1765 | parCOL[2] = kCOLhgt /2.0; |
| 053767a4 |
1766 | gMC->Gsposp("UTC3",ilayer+2*kNlayer,"UTF1", xpos,ypos,zpos |
| b640260a |
1767 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1768 | gMC->Gsposp("UTC3",ilayer+3*kNlayer,"UTF1",-xpos,ypos,zpos |
| b640260a |
1769 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1770 | gMC->Gsposp("UTC3",ilayer+4*kNlayer,"UTF2", xpos,ypos,zpos |
| b640260a |
1771 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1772 | gMC->Gsposp("UTC3",ilayer+5*kNlayer,"UTF2",-xpos,ypos,zpos |
| b640260a |
1773 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 99ed5146 |
1774 | |
| bd0f8685 |
1775 | } |
| 1776 | |
| 053767a4 |
1777 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 10df4d39 |
1778 | |
| 1779 | // In baby frame |
| 225096c8 |
1780 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx - 2.5; |
| 10df4d39 |
1781 | ypos = kBBSdz/2.0 - kBBMdz/2.0; |
| 053a5ea0 |
1782 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1783 | + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
| 053767a4 |
1784 | + ilayer * (fgkCH + fgkVspace); |
| 10df4d39 |
1785 | parCOL[0] = kCOLwid/2.0; |
| 1786 | parCOL[1] = kBBSdz /2.0; |
| 1787 | parCOL[2] = kCOLhgt/2.0; |
| 053767a4 |
1788 | gMC->Gsposp("UTC3",ilayer+6*kNlayer,"BBTRD", xpos, ypos, zpos |
| 10df4d39 |
1789 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1790 | gMC->Gsposp("UTC3",ilayer+7*kNlayer,"BBTRD",-xpos, ypos, zpos |
| 10df4d39 |
1791 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 1792 | |
| 1793 | } |
| 1794 | |
| 053767a4 |
1795 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 10df4d39 |
1796 | |
| 1797 | // In back frame |
| 225096c8 |
1798 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx - 0.3; |
| 10df4d39 |
1799 | ypos = -kBFSdz/2.0 + kBFMdz/2.0; |
| 053a5ea0 |
1800 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1801 | + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz |
| 053767a4 |
1802 | + ilayer * (fgkCH + fgkVspace); |
| 10df4d39 |
1803 | parCOL[0] = kCOLwid/2.0; |
| 1804 | parCOL[1] = kBFSdz /2.0; |
| 1805 | parCOL[2] = kCOLhgt/2.0; |
| 053767a4 |
1806 | gMC->Gsposp("UTC3",ilayer+6*kNlayer,"BFTRD", xpos,ypos,zpos |
| 10df4d39 |
1807 | ,matrix[0],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1808 | gMC->Gsposp("UTC3",ilayer+7*kNlayer,"BFTRD",-xpos,ypos,zpos |
| 10df4d39 |
1809 | ,matrix[1],"ONLY",parCOL,kNparCOL); |
| 1810 | |
| 1811 | } |
| 1812 | |
| 053a5ea0 |
1813 | // The upper most layer |
| b640260a |
1814 | // Along the chambers |
| 225096c8 |
1815 | xpos = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3; |
| b640260a |
1816 | ypos = 0.0; |
| 1817 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
| 1818 | parCOL[0] = kCOLwid /2.0; |
| 1819 | parCOL[1] = fgkSlength/2.0; |
| 1820 | parCOL[2] = kCOLhgt /2.0; |
| 053767a4 |
1821 | gMC->Gsposp("UTC1",6 ,"UTI1", xpos,ypos,zpos |
| b640260a |
1822 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1823 | gMC->Gsposp("UTC1",6+ kNlayer,"UTI1",-xpos,ypos,zpos |
| b640260a |
1824 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1825 | gMC->Gsposp("UTC1",6+6*kNlayer,"UTI2", xpos,ypos,zpos |
| b640260a |
1826 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1827 | gMC->Gsposp("UTC1",6+7*kNlayer,"UTI2",-xpos,ypos,zpos |
| b640260a |
1828 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1829 | gMC->Gsposp("UTC1",6+8*kNlayer,"UTI3", xpos,ypos,zpos |
| b640260a |
1830 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1831 | gMC->Gsposp("UTC1",6+9*kNlayer,"UTI3",-xpos,ypos,zpos |
| b640260a |
1832 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 1833 | // Front of supermodules |
| 225096c8 |
1834 | xpos = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3; |
| b640260a |
1835 | ypos = 0.0; |
| 1836 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
| 1837 | parCOL[0] = kCOLwid /2.0; |
| 1838 | parCOL[1] = fgkFlength/2.0; |
| 1839 | parCOL[2] = kCOLhgt /2.0; |
| 053767a4 |
1840 | gMC->Gsposp("UTC3",6+2*kNlayer,"UTF1", xpos,ypos,zpos |
| b640260a |
1841 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1842 | gMC->Gsposp("UTC3",6+3*kNlayer,"UTF1",-xpos,ypos,zpos |
| b640260a |
1843 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1844 | gMC->Gsposp("UTC3",6+4*kNlayer,"UTF2", xpos,ypos,zpos |
| b640260a |
1845 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1846 | gMC->Gsposp("UTC3",6+5*kNlayer,"UTF2",-xpos,ypos,zpos |
| b640260a |
1847 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 10df4d39 |
1848 | // In baby frame |
| 225096c8 |
1849 | xpos = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 3.1; |
| 10df4d39 |
1850 | ypos = kBBSdz/2.0 - kBBMdz/2.0; |
| 1851 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
| 1852 | parCOL[0] = kCOLwid/2.0; |
| 1853 | parCOL[1] = kBBSdz /2.0; |
| 1854 | parCOL[2] = kCOLhgt/2.0; |
| 053767a4 |
1855 | gMC->Gsposp("UTC3",6+6*kNlayer,"BBTRD", xpos, ypos, zpos |
| 10df4d39 |
1856 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1857 | gMC->Gsposp("UTC3",6+7*kNlayer,"BBTRD",-xpos, ypos, zpos |
| 10df4d39 |
1858 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 1859 | // In back frame |
| 225096c8 |
1860 | xpos = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3; |
| 10df4d39 |
1861 | ypos = -kBFSdz/2.0 + kBFMdz/2.0; |
| 1862 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0; |
| 1863 | parCOL[0] = kCOLwid/2.0; |
| 1864 | parCOL[1] = kBFSdz /2.0; |
| 1865 | parCOL[2] = kCOLhgt/2.0; |
| 053767a4 |
1866 | gMC->Gsposp("UTC3",6+6*kNlayer,"BFTRD", xpos,ypos,zpos |
| 10df4d39 |
1867 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 053767a4 |
1868 | gMC->Gsposp("UTC3",6+7*kNlayer,"BFTRD",-xpos,ypos,zpos |
| 10df4d39 |
1869 | ,matrix[3],"ONLY",parCOL,kNparCOL); |
| 99ed5146 |
1870 | |
| bd0f8685 |
1871 | // |
| 053a5ea0 |
1872 | // The power bus bars |
| bd0f8685 |
1873 | // |
| 1874 | |
| 1875 | const Float_t kPWRwid = 0.6; |
| 053a5ea0 |
1876 | // Increase the height of the power bus bars to take into |
| 1877 | // account the material of additional cables, etc. |
| 1878 | const Float_t kPWRhgtA = 5.0 + 0.2; |
| 1879 | const Float_t kPWRhgtB = 5.0; |
| 1880 | const Float_t kPWRposx = 2.0; |
| 1881 | const Float_t kPWRposz = 0.1; |
| 030b4415 |
1882 | const Int_t kNparPWR = 3; |
| bd0f8685 |
1883 | Float_t parPWR[kNparPWR]; |
| b640260a |
1884 | parPWR[0] = 0.0; |
| 1885 | parPWR[1] = 0.0; |
| 1886 | parPWR[2] = 0.0; |
| 1887 | gMC->Gsvolu("UTP1","BOX ",idtmed[1325-1],parPWR,0); |
| 1888 | gMC->Gsvolu("UTP3","BOX ",idtmed[1325-1],parPWR,0); |
| bd0f8685 |
1889 | |
| 053767a4 |
1890 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| b640260a |
1891 | |
| 1892 | // Along the chambers |
| 225096c8 |
1893 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx; |
| b640260a |
1894 | ypos = 0.0; |
| 053a5ea0 |
1895 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1896 | + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
1897 | + ilayer * (fgkCH + fgkVspace); |
| b640260a |
1898 | parPWR[0] = kPWRwid /2.0; |
| 1899 | parPWR[1] = fgkSlength/2.0; |
| 053a5ea0 |
1900 | parPWR[2] = kPWRhgtA /2.0; |
| 053767a4 |
1901 | gMC->Gsposp("UTP1",ilayer ,"UTI1", xpos,ypos,zpos |
| b640260a |
1902 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1903 | gMC->Gsposp("UTP1",ilayer+ kNlayer,"UTI1",-xpos,ypos,zpos |
| b640260a |
1904 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1905 | gMC->Gsposp("UTP1",ilayer+6*kNlayer,"UTI2", xpos,ypos,zpos |
| b640260a |
1906 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1907 | gMC->Gsposp("UTP1",ilayer+7*kNlayer,"UTI2",-xpos,ypos,zpos |
| b640260a |
1908 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1909 | gMC->Gsposp("UTP1",ilayer+8*kNlayer,"UTI3", xpos,ypos,zpos |
| b640260a |
1910 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1911 | gMC->Gsposp("UTP1",ilayer+9*kNlayer,"UTI3",-xpos,ypos,zpos |
| b640260a |
1912 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 1913 | |
| 1914 | // Front of supermodule |
| 225096c8 |
1915 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx; |
| b640260a |
1916 | ypos = 0.0; |
| 053a5ea0 |
1917 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1918 | + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
1919 | + ilayer * (fgkCH + fgkVspace); |
| b640260a |
1920 | parPWR[0] = kPWRwid /2.0; |
| 1921 | parPWR[1] = fgkFlength/2.0; |
| 053a5ea0 |
1922 | parPWR[2] = kPWRhgtA /2.0; |
| 053767a4 |
1923 | gMC->Gsposp("UTP3",ilayer+2*kNlayer,"UTF1", xpos,ypos,zpos |
| b640260a |
1924 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1925 | gMC->Gsposp("UTP3",ilayer+3*kNlayer,"UTF1",-xpos,ypos,zpos |
| b640260a |
1926 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1927 | gMC->Gsposp("UTP3",ilayer+4*kNlayer,"UTF2", xpos,ypos,zpos |
| b640260a |
1928 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1929 | gMC->Gsposp("UTP3",ilayer+5*kNlayer,"UTF2",-xpos,ypos,zpos |
| b640260a |
1930 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| bd0f8685 |
1931 | |
| 1932 | } |
| 1933 | |
| 053767a4 |
1934 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 10df4d39 |
1935 | |
| 1936 | // In baby frame |
| 225096c8 |
1937 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx - 2.5; |
| 10df4d39 |
1938 | ypos = kBBSdz/2.0 - kBBMdz/2.0; |
| 053a5ea0 |
1939 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1940 | + kPWRhgtB/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
1941 | + ilayer * (fgkCH + fgkVspace); |
| 053a5ea0 |
1942 | parPWR[0] = kPWRwid /2.0; |
| 1943 | parPWR[1] = kBBSdz /2.0; |
| 1944 | parPWR[2] = kPWRhgtB/2.0; |
| 053767a4 |
1945 | gMC->Gsposp("UTP3",ilayer+6*kNlayer,"BBTRD", xpos, ypos, zpos |
| 10df4d39 |
1946 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1947 | gMC->Gsposp("UTP3",ilayer+7*kNlayer,"BBTRD",-xpos, ypos, zpos |
| 10df4d39 |
1948 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 1949 | |
| 1950 | } |
| 1951 | |
| 053767a4 |
1952 | for (ilayer = 1; ilayer < kNlayer; ilayer++) { |
| 10df4d39 |
1953 | |
| 1954 | // In back frame |
| 225096c8 |
1955 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx - 0.3; |
| 10df4d39 |
1956 | ypos = -kBFSdz/2.0 + kBFMdz/2.0; |
| 053a5ea0 |
1957 | zpos = fgkVrocsm + fgkSMpltT - fgkCalZpos |
| 1958 | + kPWRhgtB/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
1959 | + ilayer * (fgkCH + fgkVspace); |
| 053a5ea0 |
1960 | parPWR[0] = kPWRwid /2.0; |
| 1961 | parPWR[1] = kBFSdz /2.0; |
| 1962 | parPWR[2] = kPWRhgtB/2.0; |
| 053767a4 |
1963 | gMC->Gsposp("UTP3",ilayer+8*kNlayer,"BFTRD", xpos,ypos,zpos |
| 10df4d39 |
1964 | ,matrix[0],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1965 | gMC->Gsposp("UTP3",ilayer+9*kNlayer,"BFTRD",-xpos,ypos,zpos |
| 10df4d39 |
1966 | ,matrix[1],"ONLY",parPWR,kNparPWR); |
| 1967 | |
| 1968 | } |
| 1969 | |
| 1970 | // The upper most layer |
| b640260a |
1971 | // Along the chambers |
| 225096c8 |
1972 | xpos = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3; |
| 4ba1d6ae |
1973 | ypos = 0.0; |
| 1974 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
| b640260a |
1975 | parPWR[0] = kPWRwid /2.0; |
| 1976 | parPWR[1] = fgkSlength/2.0; |
| 053a5ea0 |
1977 | parPWR[2] = kPWRhgtB /2.0 ; |
| 053767a4 |
1978 | gMC->Gsposp("UTP1",6 ,"UTI1", xpos,ypos,zpos |
| b640260a |
1979 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1980 | gMC->Gsposp("UTP1",6+ kNlayer,"UTI1",-xpos,ypos,zpos |
| b640260a |
1981 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1982 | gMC->Gsposp("UTP1",6+6*kNlayer,"UTI2", xpos,ypos,zpos |
| b640260a |
1983 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1984 | gMC->Gsposp("UTP1",6+7*kNlayer,"UTI2",-xpos,ypos,zpos |
| b640260a |
1985 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1986 | gMC->Gsposp("UTP1",6+8*kNlayer,"UTI3", xpos,ypos,zpos |
| b640260a |
1987 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1988 | gMC->Gsposp("UTP1",6+9*kNlayer,"UTI3",-xpos,ypos,zpos |
| b640260a |
1989 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 1990 | // Front of supermodules |
| 225096c8 |
1991 | xpos = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3; |
| b640260a |
1992 | ypos = 0.0; |
| 1993 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
| 1994 | parPWR[0] = kPWRwid /2.0; |
| 1995 | parPWR[1] = fgkFlength/2.0; |
| 053a5ea0 |
1996 | parPWR[2] = kPWRhgtB /2.0; |
| 053767a4 |
1997 | gMC->Gsposp("UTP3",6+2*kNlayer,"UTF1", xpos,ypos,zpos |
| b640260a |
1998 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
1999 | gMC->Gsposp("UTP3",6+3*kNlayer,"UTF1",-xpos,ypos,zpos |
| b640260a |
2000 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2001 | gMC->Gsposp("UTP3",6+4*kNlayer,"UTF2", xpos,ypos,zpos |
| b640260a |
2002 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2003 | gMC->Gsposp("UTP3",6+5*kNlayer,"UTF2",-xpos,ypos,zpos |
| b640260a |
2004 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 10df4d39 |
2005 | // In baby frame |
| 225096c8 |
2006 | xpos = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 3.0; |
| 10df4d39 |
2007 | ypos = kBBSdz/2.0 - kBBMdz/2.0; |
| 2008 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
| 053a5ea0 |
2009 | parPWR[0] = kPWRwid /2.0; |
| 2010 | parPWR[1] = kBBSdz /2.0; |
| 2011 | parPWR[2] = kPWRhgtB/2.0; |
| 053767a4 |
2012 | gMC->Gsposp("UTP3",6+6*kNlayer,"BBTRD", xpos, ypos, zpos |
| 10df4d39 |
2013 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2014 | gMC->Gsposp("UTP3",6+7*kNlayer,"BBTRD",-xpos, ypos, zpos |
| 10df4d39 |
2015 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 2016 | // In back frame |
| 225096c8 |
2017 | xpos = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3; |
| 10df4d39 |
2018 | ypos = -kBFSdz/2.0 + kBFMdz/2.0; |
| 2019 | zpos = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0; |
| 053a5ea0 |
2020 | parPWR[0] = kPWRwid /2.0; |
| 2021 | parPWR[1] = kBFSdz /2.0; |
| 2022 | parPWR[2] = kPWRhgtB/2.0; |
| 053767a4 |
2023 | gMC->Gsposp("UTP3",6+8*kNlayer,"BFTRD", xpos,ypos,zpos |
| 10df4d39 |
2024 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| 053767a4 |
2025 | gMC->Gsposp("UTP3",6+9*kNlayer,"BFTRD",-xpos,ypos,zpos |
| 10df4d39 |
2026 | ,matrix[3],"ONLY",parPWR,kNparPWR); |
| b640260a |
2027 | |
| 2028 | // |
| 2029 | // The gas tubes connecting the chambers in the super modules with holes |
| f73d8692 |
2030 | // Material: Stainless steel |
| b640260a |
2031 | // |
| 2032 | |
| 2033 | parTube[0] = 0.0; |
| 2034 | parTube[1] = 2.2/2.0; |
| 225096c8 |
2035 | parTube[2] = fgkClength[5][2]/2.0 - fgkHspace/2.0; |
| f73d8692 |
2036 | gMC->Gsvolu("UTG1","TUBE",idtmed[1308-1],parTube,kNparTube); |
| b640260a |
2037 | parTube[0] = 0.0; |
| f73d8692 |
2038 | parTube[1] = 2.1/2.0; |
| 225096c8 |
2039 | parTube[2] = fgkClength[5][2]/2.0 - fgkHspace/2.0; |
| b640260a |
2040 | gMC->Gsvolu("UTG2","TUBE",idtmed[1309-1],parTube,kNparTube); |
| 2041 | xpos = 0.0; |
| 99ed5146 |
2042 | ypos = 0.0; |
| b640260a |
2043 | zpos = 0.0; |
| 2044 | gMC->Gspos("UTG2",1,"UTG1",xpos,ypos,zpos,0,"ONLY"); |
| 053767a4 |
2045 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 225096c8 |
2046 | xpos = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 - 1.5; |
| b640260a |
2047 | ypos = 0.0; |
| 2048 | zpos = fgkVrocsm + fgkSMpltT + kCOLhgt/2.0 - fgkSheight/2.0 + 5.0 |
| 053767a4 |
2049 | + ilayer * (fgkCH + fgkVspace); |
| 2050 | gMC->Gspos("UTG1",1+ilayer,"UTI3", xpos, ypos, zpos,matrix[4],"ONLY"); |
| 2051 | gMC->Gspos("UTG1",7+ilayer,"UTI3",-xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2052 | } |
| 99ed5146 |
2053 | |
| bd0f8685 |
2054 | // |
| 2055 | // The volumes for the services at the chambers |
| 2056 | // |
| 2057 | |
| 2058 | const Int_t kNparServ = 3; |
| 2059 | Float_t parServ[kNparServ]; |
| 2060 | |
| 053767a4 |
2061 | for (istack = 0; istack < kNstack; istack++) { |
| 2062 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| bd0f8685 |
2063 | |
| 053767a4 |
2064 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| bd0f8685 |
2065 | |
| 024c0422 |
2066 | snprintf(cTagV,kTag,"UU%02d",iDet); |
| 225096c8 |
2067 | parServ[0] = fgkCwidth[ilayer] /2.0; |
| 2068 | parServ[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0; |
| 053a5ea0 |
2069 | parServ[2] = fgkCsvH /2.0; |
| bd0f8685 |
2070 | gMC->Gsvolu(cTagV,"BOX",idtmed[1302-1],parServ,kNparServ); |
| a797f961 |
2071 | |
| bd0f8685 |
2072 | } |
| 2073 | } |
| 2074 | |
| 2075 | // |
| 2076 | // The cooling pipes inside the service volumes |
| 2077 | // |
| 2078 | |
| 0a5f3331 |
2079 | // The cooling pipes |
| e7014565 |
2080 | parTube[0] = 0.0; |
| 2081 | parTube[1] = 0.0; |
| 2082 | parTube[2] = 0.0; |
| bd0f8685 |
2083 | gMC->Gsvolu("UTCP","TUBE",idtmed[1324-1],parTube,0); |
| 2084 | // The cooling water |
| 2085 | parTube[0] = 0.0; |
| 030b4415 |
2086 | parTube[1] = 0.2/2.0; |
| e7014565 |
2087 | parTube[2] = -1.0; |
| bd0f8685 |
2088 | gMC->Gsvolu("UTCH","TUBE",idtmed[1314-1],parTube,kNparTube); |
| 2089 | // Water inside the cooling pipe |
| 2090 | xpos = 0.0; |
| 2091 | ypos = 0.0; |
| 2092 | zpos = 0.0; |
| 2093 | gMC->Gspos("UTCH",1,"UTCP",xpos,ypos,zpos,0,"ONLY"); |
| 2094 | |
| 2095 | // Position the cooling pipes in the mother volume |
| 053767a4 |
2096 | for (istack = 0; istack < kNstack; istack++) { |
| 2097 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2098 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2099 | Int_t iCopy = GetDetector(ilayer,istack,0) * 100; |
| 2100 | Int_t nMCMrow = GetRowMax(ilayer,istack,0); |
| 2101 | Float_t ySize = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| bd0f8685 |
2102 | / ((Float_t) nMCMrow); |
| 024c0422 |
2103 | snprintf(cTagV,kTag,"UU%02d",iDet); |
| bd0f8685 |
2104 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { |
| 2105 | xpos = 0.0; |
| 053a5ea0 |
2106 | ypos = (0.5 + iMCMrow) * ySize |
| 225096c8 |
2107 | - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0; |
| 030b4415 |
2108 | zpos = 0.0 + 0.742/2.0; |
| e7014565 |
2109 | // The cooling pipes |
| b640260a |
2110 | parTube[0] = 0.0; |
| 2111 | parTube[1] = 0.3/2.0; // Thickness of the cooling pipes |
| 225096c8 |
2112 | parTube[2] = fgkCwidth[ilayer]/2.0; |
| bd0f8685 |
2113 | gMC->Gsposp("UTCP",iCopy+iMCMrow,cTagV,xpos,ypos,zpos |
| b640260a |
2114 | ,matrix[2],"ONLY",parTube,kNparTube); |
| bd0f8685 |
2115 | } |
| 2116 | } |
| 2117 | } |
| 2118 | |
| 2119 | // |
| 2120 | // The power lines |
| 2121 | // |
| 2122 | |
| 2123 | // The copper power lines |
| 2124 | parTube[0] = 0.0; |
| 2125 | parTube[1] = 0.0; |
| 2126 | parTube[2] = 0.0; |
| 2127 | gMC->Gsvolu("UTPL","TUBE",idtmed[1305-1],parTube,0); |
| 2128 | |
| 2129 | // Position the power lines in the mother volume |
| 053767a4 |
2130 | for (istack = 0; istack < kNstack; istack++) { |
| 2131 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2132 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2133 | Int_t iCopy = GetDetector(ilayer,istack,0) * 100; |
| 2134 | Int_t nMCMrow = GetRowMax(ilayer,istack,0); |
| 2135 | Float_t ySize = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| bd0f8685 |
2136 | / ((Float_t) nMCMrow); |
| 024c0422 |
2137 | snprintf(cTagV,kTag,"UU%02d",iDet); |
| bd0f8685 |
2138 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { |
| b640260a |
2139 | xpos = 0.0; |
| 2140 | ypos = (0.5 + iMCMrow) * ySize - 1.0 |
| 225096c8 |
2141 | - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0; |
| b640260a |
2142 | zpos = -0.4 + 0.742/2.0; |
| 2143 | parTube[0] = 0.0; |
| 2144 | parTube[1] = 0.2/2.0; // Thickness of the power lines |
| 225096c8 |
2145 | parTube[2] = fgkCwidth[ilayer]/2.0; |
| bd0f8685 |
2146 | gMC->Gsposp("UTPL",iCopy+iMCMrow,cTagV,xpos,ypos,zpos |
| b640260a |
2147 | ,matrix[2],"ONLY",parTube,kNparTube); |
| bd0f8685 |
2148 | } |
| 2149 | } |
| 2150 | } |
| 2151 | |
| 2152 | // |
| 2153 | // The MCMs |
| 2154 | // |
| 2155 | |
| 1f766e4b |
2156 | const Float_t kMCMx = 3.0; |
| 2157 | const Float_t kMCMy = 3.0; |
| 2158 | const Float_t kMCMz = 0.3; |
| 2159 | |
| 2160 | const Float_t kMCMpcTh = 0.1; |
| 2161 | const Float_t kMCMcuTh = 0.0025; |
| 2162 | const Float_t kMCMsiTh = 0.03; |
| 2163 | const Float_t kMCMcoTh = 0.04; |
| 0a5f3331 |
2164 | |
| bd0f8685 |
2165 | // The mother volume for the MCMs (air) |
| 2166 | const Int_t kNparMCM = 3; |
| 2167 | Float_t parMCM[kNparMCM]; |
| 0a5f3331 |
2168 | parMCM[0] = kMCMx /2.0; |
| 2169 | parMCM[1] = kMCMy /2.0; |
| 2170 | parMCM[2] = kMCMz /2.0; |
| bd0f8685 |
2171 | gMC->Gsvolu("UMCM","BOX",idtmed[1302-1],parMCM,kNparMCM); |
| 2172 | |
| 2173 | // The MCM carrier G10 layer |
| 0a5f3331 |
2174 | parMCM[0] = kMCMx /2.0; |
| 2175 | parMCM[1] = kMCMy /2.0; |
| 2176 | parMCM[2] = kMCMpcTh/2.0; |
| bd0f8685 |
2177 | gMC->Gsvolu("UMC1","BOX",idtmed[1319-1],parMCM,kNparMCM); |
| 2178 | // The MCM carrier Cu layer |
| 0a5f3331 |
2179 | parMCM[0] = kMCMx /2.0; |
| 2180 | parMCM[1] = kMCMy /2.0; |
| 2181 | parMCM[2] = kMCMcuTh/2.0; |
| bd0f8685 |
2182 | gMC->Gsvolu("UMC2","BOX",idtmed[1318-1],parMCM,kNparMCM); |
| 2183 | // The silicon of the chips |
| 0a5f3331 |
2184 | parMCM[0] = kMCMx /2.0; |
| 2185 | parMCM[1] = kMCMy /2.0; |
| 2186 | parMCM[2] = kMCMsiTh/2.0; |
| bd0f8685 |
2187 | gMC->Gsvolu("UMC3","BOX",idtmed[1320-1],parMCM,kNparMCM); |
| 0a5f3331 |
2188 | // The aluminum of the cooling plates |
| 2189 | parMCM[0] = kMCMx /2.0; |
| 2190 | parMCM[1] = kMCMy /2.0; |
| 2191 | parMCM[2] = kMCMcoTh/2.0; |
| 2192 | gMC->Gsvolu("UMC4","BOX",idtmed[1324-1],parMCM,kNparMCM); |
| bd0f8685 |
2193 | |
| 2194 | // Put the MCM material inside the MCM mother volume |
| 2195 | xpos = 0.0; |
| 2196 | ypos = 0.0; |
| 0a5f3331 |
2197 | zpos = -kMCMz /2.0 + kMCMpcTh/2.0; |
| bd0f8685 |
2198 | gMC->Gspos("UMC1",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
2199 | zpos += kMCMpcTh/2.0 + kMCMcuTh/2.0; |
| bd0f8685 |
2200 | gMC->Gspos("UMC2",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
2201 | zpos += kMCMcuTh/2.0 + kMCMsiTh/2.0; |
| bd0f8685 |
2202 | gMC->Gspos("UMC3",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
| 0a5f3331 |
2203 | zpos += kMCMsiTh/2.0 + kMCMcoTh/2.0; |
| 2204 | gMC->Gspos("UMC4",1,"UMCM",xpos,ypos,zpos,0,"ONLY"); |
| bd0f8685 |
2205 | |
| 2206 | // Position the MCMs in the mother volume |
| 053767a4 |
2207 | for (istack = 0; istack < kNstack; istack++) { |
| 2208 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2209 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2210 | Int_t iCopy = GetDetector(ilayer,istack,0) * 1000; |
| 2211 | Int_t nMCMrow = GetRowMax(ilayer,istack,0); |
| 023b669c |
2212 | Float_t ySize = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| bd0f8685 |
2213 | / ((Float_t) nMCMrow); |
| 2214 | Int_t nMCMcol = 8; |
| 053767a4 |
2215 | Float_t xSize = (GetChamberWidth(ilayer) - 2.0*fgkCpadW) |
| 023b669c |
2216 | / ((Float_t) nMCMcol + 6); // Introduce 6 gaps |
| 2217 | Int_t iMCM[8] = { 1, 2, 3, 5, 8, 9, 10, 12 }; // 0..7 MCM + 6 gap structure |
| 024c0422 |
2218 | snprintf(cTagV,kTag,"UU%02d",iDet); |
| bd0f8685 |
2219 | for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) { |
| 2220 | for (Int_t iMCMcol = 0; iMCMcol < nMCMcol; iMCMcol++) { |
| 023b669c |
2221 | xpos = (0.5 + iMCM[iMCMcol]) * xSize + 1.0 |
| 225096c8 |
2222 | - fgkCwidth[ilayer]/2.0; |
| 023b669c |
2223 | ypos = (0.5 + iMCMrow) * ySize + 1.0 |
| 225096c8 |
2224 | - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0; |
| b640260a |
2225 | zpos = -0.4 + 0.742/2.0; |
| bd0f8685 |
2226 | gMC->Gspos("UMCM",iCopy+iMCMrow*10+iMCMcol,cTagV |
| 2227 | ,xpos,ypos,zpos,0,"ONLY"); |
| 053a5ea0 |
2228 | // Add two additional smaller cooling pipes on top of the MCMs |
| 2229 | // to mimic the meandering structure |
| 2230 | xpos = (0.5 + iMCM[iMCMcol]) * xSize + 1.0 |
| 225096c8 |
2231 | - fgkCwidth[ilayer]/2.0; |
| 053a5ea0 |
2232 | ypos = (0.5 + iMCMrow) * ySize |
| 225096c8 |
2233 | - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0; |
| 053a5ea0 |
2234 | zpos = 0.0 + 0.742/2.0; |
| 2235 | parTube[0] = 0.0; |
| 2236 | parTube[1] = 0.3/2.0; // Thickness of the cooling pipes |
| 2237 | parTube[2] = kMCMx/2.0; |
| 2238 | gMC->Gsposp("UTCP",iCopy+iMCMrow*10+iMCMcol+ 50,cTagV |
| 2239 | ,xpos,ypos+1.0,zpos |
| 2240 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 2241 | gMC->Gsposp("UTCP",iCopy+iMCMrow*10+iMCMcol+500,cTagV |
| 2242 | ,xpos,ypos+2.0,zpos |
| 2243 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 2244 | |
| 023b669c |
2245 | } |
| bd0f8685 |
2246 | } |
| 2247 | |
| 2248 | } |
| 2249 | } |
| 2250 | |
| 053a5ea0 |
2251 | // |
| 2252 | // The DCS boards |
| 2253 | // |
| 2254 | |
| 2255 | const Float_t kDCSx = 9.0; |
| 2256 | const Float_t kDCSy = 14.5; |
| 2257 | const Float_t kDCSz = 0.3; |
| 2258 | |
| 2259 | const Float_t kDCSpcTh = 0.15; |
| 2260 | const Float_t kDCScuTh = 0.01; |
| 2261 | const Float_t kDCScoTh = 0.04; |
| 2262 | |
| 2263 | // The mother volume for the DCSs (air) |
| 2264 | const Int_t kNparDCS = 3; |
| 2265 | Float_t parDCS[kNparDCS]; |
| 2266 | parDCS[0] = kDCSx /2.0; |
| 2267 | parDCS[1] = kDCSy /2.0; |
| 2268 | parDCS[2] = kDCSz /2.0; |
| 2269 | gMC->Gsvolu("UDCS","BOX",idtmed[1302-1],parDCS,kNparDCS); |
| 2270 | |
| 2271 | // The DCS carrier G10 layer |
| 2272 | parDCS[0] = kDCSx /2.0; |
| 2273 | parDCS[1] = kDCSy /2.0; |
| 2274 | parDCS[2] = kDCSpcTh/2.0; |
| 2275 | gMC->Gsvolu("UDC1","BOX",idtmed[1319-1],parDCS,kNparDCS); |
| 2276 | // The DCS carrier Cu layer |
| 2277 | parDCS[0] = kDCSx /2.0; |
| 2278 | parDCS[1] = kDCSy /2.0; |
| 2279 | parDCS[2] = kDCScuTh/2.0; |
| 2280 | gMC->Gsvolu("UDC2","BOX",idtmed[1318-1],parDCS,kNparDCS); |
| 2281 | // The aluminum of the cooling plates |
| 075abeb7 |
2282 | parDCS[0] = 5.0 /2.0; |
| 2283 | parDCS[1] = 5.0 /2.0; |
| 053a5ea0 |
2284 | parDCS[2] = kDCScoTh/2.0; |
| 2285 | gMC->Gsvolu("UDC3","BOX",idtmed[1324-1],parDCS,kNparDCS); |
| 2286 | |
| 2287 | // Put the DCS material inside the DCS mother volume |
| 2288 | xpos = 0.0; |
| 2289 | ypos = 0.0; |
| 2290 | zpos = -kDCSz /2.0 + kDCSpcTh/2.0; |
| 2291 | gMC->Gspos("UDC1",1,"UDCS",xpos,ypos,zpos,0,"ONLY"); |
| 2292 | zpos += kDCSpcTh/2.0 + kDCScuTh/2.0; |
| 2293 | gMC->Gspos("UDC2",1,"UDCS",xpos,ypos,zpos,0,"ONLY"); |
| 2294 | zpos += kDCScuTh/2.0 + kDCScoTh/2.0; |
| 2295 | gMC->Gspos("UDC3",1,"UDCS",xpos,ypos,zpos,0,"ONLY"); |
| 2296 | |
| 2297 | // Put the DCS board in the chamber services mother volume |
| 2298 | for (istack = 0; istack < kNstack; istack++) { |
| 2299 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2300 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2301 | Int_t iCopy = iDet + 1; |
| 225096c8 |
2302 | xpos = fgkCwidth[ilayer]/2.0 - 1.9 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| 053a5ea0 |
2303 | / ((Float_t) GetRowMax(ilayer,istack,0)); |
| 225096c8 |
2304 | ypos = 0.05 * fgkClength[ilayer][istack]; |
| 053a5ea0 |
2305 | zpos = kDCSz/2.0 - fgkCsvH/2.0; |
| 024c0422 |
2306 | snprintf(cTagV,kTag,"UU%02d",iDet); |
| 053a5ea0 |
2307 | gMC->Gspos("UDCS",iCopy,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 2308 | } |
| 2309 | } |
| 2310 | |
| 2311 | // |
| 2312 | // The ORI boards |
| 2313 | // |
| 2314 | |
| 2315 | const Float_t kORIx = 4.2; |
| 2316 | const Float_t kORIy = 13.5; |
| 2317 | const Float_t kORIz = 0.3; |
| 2318 | |
| 2319 | const Float_t kORIpcTh = 0.15; |
| 2320 | const Float_t kORIcuTh = 0.01; |
| 2321 | const Float_t kORIcoTh = 0.04; |
| 2322 | |
| 2323 | // The mother volume for the ORIs (air) |
| 2324 | const Int_t kNparORI = 3; |
| 2325 | Float_t parORI[kNparORI]; |
| 2326 | parORI[0] = kORIx /2.0; |
| 2327 | parORI[1] = kORIy /2.0; |
| 2328 | parORI[2] = kORIz /2.0; |
| 2329 | gMC->Gsvolu("UORI","BOX",idtmed[1302-1],parORI,kNparORI); |
| 2330 | |
| 2331 | // The ORI carrier G10 layer |
| 2332 | parORI[0] = kORIx /2.0; |
| 2333 | parORI[1] = kORIy /2.0; |
| 2334 | parORI[2] = kORIpcTh/2.0; |
| 2335 | gMC->Gsvolu("UOR1","BOX",idtmed[1319-1],parORI,kNparORI); |
| 2336 | // The ORI carrier Cu layer |
| 2337 | parORI[0] = kORIx /2.0; |
| 2338 | parORI[1] = kORIy /2.0; |
| 2339 | parORI[2] = kORIcuTh/2.0; |
| 2340 | gMC->Gsvolu("UOR2","BOX",idtmed[1318-1],parORI,kNparORI); |
| 2341 | // The aluminum of the cooling plates |
| 2342 | parORI[0] = kORIx /2.0; |
| 2343 | parORI[1] = kORIy /2.0; |
| 2344 | parORI[2] = kORIcoTh/2.0; |
| 2345 | gMC->Gsvolu("UOR3","BOX",idtmed[1324-1],parORI,kNparORI); |
| 2346 | |
| 2347 | // Put the ORI material inside the ORI mother volume |
| 2348 | xpos = 0.0; |
| 2349 | ypos = 0.0; |
| 2350 | zpos = -kORIz /2.0 + kORIpcTh/2.0; |
| 2351 | gMC->Gspos("UOR1",1,"UORI",xpos,ypos,zpos,0,"ONLY"); |
| 2352 | zpos += kORIpcTh/2.0 + kORIcuTh/2.0; |
| 2353 | gMC->Gspos("UOR2",1,"UORI",xpos,ypos,zpos,0,"ONLY"); |
| 2354 | zpos += kORIcuTh/2.0 + kORIcoTh/2.0; |
| 2355 | gMC->Gspos("UOR3",1,"UORI",xpos,ypos,zpos,0,"ONLY"); |
| 2356 | |
| 2357 | // Put the ORI board in the chamber services mother volume |
| 2358 | for (istack = 0; istack < kNstack; istack++) { |
| 2359 | for (ilayer = 0; ilayer < kNlayer; ilayer++) { |
| 2360 | Int_t iDet = GetDetectorSec(ilayer,istack); |
| 2361 | Int_t iCopy = iDet + 1; |
| 225096c8 |
2362 | xpos = fgkCwidth[ilayer]/2.0 - 1.92 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| 053a5ea0 |
2363 | / ((Float_t) GetRowMax(ilayer,istack,0)); |
| 2364 | ypos = -16.0; |
| 2365 | zpos = kORIz/2.0 - fgkCsvH/2.0; |
| 024c0422 |
2366 | snprintf(cTagV,kTag,"UU%02d",iDet); |
| 053a5ea0 |
2367 | gMC->Gspos("UORI",iCopy ,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 225096c8 |
2368 | xpos = -fgkCwidth[ilayer]/2.0 + 3.8 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW) |
| 053a5ea0 |
2369 | / ((Float_t) GetRowMax(ilayer,istack,0)); |
| 2370 | ypos = -16.0; |
| 2371 | zpos = kORIz/2.0 - fgkCsvH/2.0; |
| 024c0422 |
2372 | snprintf(cTagV,kTag,"UU%02d",iDet); |
| 053a5ea0 |
2373 | gMC->Gspos("UORI",iCopy+kNdet,cTagV,xpos,ypos,zpos,0,"ONLY"); |
| 2374 | } |
| 2375 | } |
| 2376 | |
| b640260a |
2377 | // |
| 2378 | // Services in front of the super module |
| 2379 | // |
| 2380 | |
| 9bf8c575 |
2381 | // Gas in-/outlet pipes (INOX) |
| 2382 | parTube[0] = 0.0; |
| 2383 | parTube[1] = 0.0; |
| 2384 | parTube[2] = 0.0; |
| 2385 | gMC->Gsvolu("UTG3","TUBE",idtmed[1308-1],parTube,0); |
| 2386 | // The gas inside the in-/outlet pipes (Xe) |
| 2387 | parTube[0] = 0.0; |
| 2388 | parTube[1] = 1.2/2.0; |
| 2389 | parTube[2] = -1.0; |
| 2390 | gMC->Gsvolu("UTG4","TUBE",idtmed[1309-1],parTube,kNparTube); |
| 2391 | xpos = 0.0; |
| 2392 | ypos = 0.0; |
| 2393 | zpos = 0.0; |
| 2394 | gMC->Gspos("UTG4",1,"UTG3",xpos,ypos,zpos,0,"ONLY"); |
| 053767a4 |
2395 | for (ilayer = 0; ilayer < kNlayer-1; ilayer++) { |
| 9bf8c575 |
2396 | xpos = 0.0; |
| 225096c8 |
2397 | ypos = fgkClength[ilayer][2]/2.0 |
| 2398 | + fgkClength[ilayer][1] |
| 2399 | + fgkClength[ilayer][0]; |
| 9bf8c575 |
2400 | zpos = 9.0 - fgkSheight/2.0 |
| 053767a4 |
2401 | + ilayer * (fgkCH + fgkVspace); |
| 9bf8c575 |
2402 | parTube[0] = 0.0; |
| 2403 | parTube[1] = 1.5/2.0; |
| 225096c8 |
2404 | parTube[2] = fgkCwidth[ilayer]/2.0 - 2.5; |
| 053767a4 |
2405 | gMC->Gsposp("UTG3",ilayer+1 ,"UTI1", xpos, ypos, zpos |
| 9bf8c575 |
2406 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2407 | gMC->Gsposp("UTG3",ilayer+1+1*kNlayer,"UTI1", xpos,-ypos, zpos |
| 9bf8c575 |
2408 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2409 | gMC->Gsposp("UTG3",ilayer+1+2*kNlayer,"UTI2", xpos, ypos, zpos |
| 9bf8c575 |
2410 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2411 | gMC->Gsposp("UTG3",ilayer+1+3*kNlayer,"UTI2", xpos,-ypos, zpos |
| 9bf8c575 |
2412 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2413 | gMC->Gsposp("UTG3",ilayer+1+4*kNlayer,"UTI3", xpos, ypos, zpos |
| 9bf8c575 |
2414 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 053767a4 |
2415 | gMC->Gsposp("UTG3",ilayer+1+5*kNlayer,"UTI3", xpos,-ypos, zpos |
| 9bf8c575 |
2416 | ,matrix[2],"ONLY",parTube,kNparTube); |
| 2417 | } |
| 2418 | |
| b640260a |
2419 | // Gas distribution box |
| 2420 | parBox[0] = 14.50/2.0; |
| 2421 | parBox[1] = 4.52/2.0; |
| 2422 | parBox[2] = 5.00/2.0; |
| 2423 | gMC->Gsvolu("UTGD","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2424 | parBox[0] = 14.50/2.0; |
| 2425 | parBox[1] = 4.00/2.0; |
| 2426 | parBox[2] = 4.40/2.0; |
| 2427 | gMC->Gsvolu("UTGI","BOX ",idtmed[1309-1],parBox,kNparBox); |
| 2428 | parTube[0] = 0.0; |
| 2429 | parTube[1] = 4.0/2.0; |
| 2430 | parTube[2] = 8.0/2.0; |
| 2431 | gMC->Gsvolu("UTGT","TUBE",idtmed[1308-1],parTube,kNparTube); |
| 2432 | parTube[0] = 0.0; |
| 2433 | parTube[1] = 3.4/2.0; |
| 2434 | parTube[2] = 8.0/2.0; |
| 2435 | gMC->Gsvolu("UTGG","TUBE",idtmed[1309-1],parTube,kNparTube); |
| 2436 | xpos = 0.0; |
| 2437 | ypos = 0.0; |
| 2438 | zpos = 0.0; |
| 2439 | gMC->Gspos("UTGI",1,"UTGD",xpos,ypos,zpos, 0,"ONLY"); |
| 2440 | gMC->Gspos("UTGG",1,"UTGT",xpos,ypos,zpos, 0,"ONLY"); |
| 2441 | xpos = 0.0; |
| 2442 | ypos = 0.0; |
| 2443 | zpos = 0.0; |
| 2444 | gMC->Gspos("UTGD",1,"UTF1",xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
2445 | xpos = -3.0; |
| 2446 | ypos = 0.0; |
| 2447 | zpos = 6.5; |
| 2448 | gMC->Gspos("UTGT",1,"UTF1",xpos,ypos,zpos, 0,"ONLY"); |
| b640260a |
2449 | xpos = -11.25; |
| 2450 | ypos = 0.0; |
| 2451 | zpos = 0.5; |
| 2452 | gMC->Gspos("UTGT",3,"UTF1",xpos,ypos,zpos,matrix[2],"ONLY"); |
| b640260a |
2453 | xpos = 11.25; |
| 2454 | ypos = 0.0; |
| 2455 | zpos = 0.5; |
| 2456 | gMC->Gspos("UTGT",5,"UTF1",xpos,ypos,zpos,matrix[2],"ONLY"); |
| b640260a |
2457 | |
| 2458 | // Cooling manifolds |
| 2459 | parBox[0] = 5.0/2.0; |
| 2460 | parBox[1] = 23.0/2.0; |
| 2461 | parBox[2] = 70.0/2.0; |
| 2462 | gMC->Gsvolu("UTCM","BOX ",idtmed[1302-1],parBox,kNparBox); |
| 2463 | parBox[0] = 5.0/2.0; |
| 2464 | parBox[1] = 5.0/2.0; |
| 2465 | parBox[2] = 70.0/2.0; |
| 2466 | gMC->Gsvolu("UTCA","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2467 | parBox[0] = 5.0/2.0 - 0.3; |
| 2468 | parBox[1] = 5.0/2.0 - 0.3; |
| 2469 | parBox[2] = 70.0/2.0 - 0.3; |
| 2470 | gMC->Gsvolu("UTCW","BOX ",idtmed[1314-1],parBox,kNparBox); |
| 2471 | xpos = 0.0; |
| 2472 | ypos = 0.0; |
| 2473 | zpos = 0.0; |
| 2474 | gMC->Gspos("UTCW",1,"UTCA", xpos, ypos, zpos, 0,"ONLY"); |
| 2475 | xpos = 0.0; |
| 2476 | ypos = 5.0/2.0 - 23.0/2.0; |
| 2477 | zpos = 0.0; |
| 2478 | gMC->Gspos("UTCA",1,"UTCM", xpos, ypos, zpos, 0,"ONLY"); |
| 2479 | parTube[0] = 0.0; |
| 2480 | parTube[1] = 3.0/2.0; |
| 2481 | parTube[2] = 18.0/2.0; |
| 9bf8c575 |
2482 | gMC->Gsvolu("UTCO","TUBE",idtmed[1308-1],parTube,kNparTube); |
| b640260a |
2483 | parTube[0] = 0.0; |
| 2484 | parTube[1] = 3.0/2.0 - 0.3; |
| 2485 | parTube[2] = 18.0/2.0; |
| 2486 | gMC->Gsvolu("UTCL","TUBE",idtmed[1314-1],parTube,kNparTube); |
| 2487 | xpos = 0.0; |
| 2488 | ypos = 0.0; |
| 2489 | zpos = 0.0; |
| 9bf8c575 |
2490 | gMC->Gspos("UTCL",1,"UTCO", xpos, ypos, zpos, 0,"ONLY"); |
| b640260a |
2491 | xpos = 0.0; |
| 2492 | ypos = 2.5; |
| 2493 | zpos = -70.0/2.0 + 7.0; |
| 9bf8c575 |
2494 | gMC->Gspos("UTCO",1,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2495 | zpos += 7.0; |
| 9bf8c575 |
2496 | gMC->Gspos("UTCO",2,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2497 | zpos += 7.0; |
| 9bf8c575 |
2498 | gMC->Gspos("UTCO",3,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2499 | zpos += 7.0; |
| 9bf8c575 |
2500 | gMC->Gspos("UTCO",4,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2501 | zpos += 7.0; |
| 9bf8c575 |
2502 | gMC->Gspos("UTCO",5,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2503 | zpos += 7.0; |
| 9bf8c575 |
2504 | gMC->Gspos("UTCO",6,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2505 | zpos += 7.0; |
| 9bf8c575 |
2506 | gMC->Gspos("UTCO",7,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2507 | zpos += 7.0; |
| 9bf8c575 |
2508 | gMC->Gspos("UTCO",8,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY"); |
| b640260a |
2509 | |
| 2510 | xpos = 40.0; |
| 2511 | ypos = fgkFlength/2.0 - 23.0/2.0; |
| 2512 | zpos = 0.0; |
| 2513 | gMC->Gspos("UTCM",1,"UTF1", xpos, ypos, zpos,matrix[0],"ONLY"); |
| 2514 | gMC->Gspos("UTCM",2,"UTF1",-xpos, ypos, zpos,matrix[1],"ONLY"); |
| 2515 | gMC->Gspos("UTCM",3,"UTF2", xpos,-ypos, zpos,matrix[5],"ONLY"); |
| 2516 | gMC->Gspos("UTCM",4,"UTF2",-xpos,-ypos, zpos,matrix[6],"ONLY"); |
| 2517 | |
| f73d8692 |
2518 | // Power connection boards (Cu) |
| 2519 | parBox[0] = 0.5/2.0; |
| 2520 | parBox[1] = 15.0/2.0; |
| 2521 | parBox[2] = 7.0/2.0; |
| 2522 | gMC->Gsvolu("UTPC","BOX ",idtmed[1325-1],parBox,kNparBox); |
| 053767a4 |
2523 | for (ilayer = 0; ilayer < kNlayer-1; ilayer++) { |
| 225096c8 |
2524 | xpos = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0; |
| f73d8692 |
2525 | ypos = 0.0; |
| 053a5ea0 |
2526 | zpos = fgkVrocsm + fgkSMpltT + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz |
| 053767a4 |
2527 | + (ilayer+1) * (fgkCH + fgkVspace); |
| 2528 | gMC->Gspos("UTPC",ilayer ,"UTF1", xpos,ypos,zpos,matrix[0],"ONLY"); |
| 2529 | gMC->Gspos("UTPC",ilayer+kNlayer,"UTF1",-xpos,ypos,zpos,matrix[1],"ONLY"); |
| f73d8692 |
2530 | } |
| 225096c8 |
2531 | xpos = fgkCwidth[5]/2.0 + kPWRhgtA/2.0 - 2.0; |
| f73d8692 |
2532 | ypos = 0.0; |
| 2533 | zpos = fgkSheight/2.0 - fgkSMpltT - 2.0; |
| 053767a4 |
2534 | gMC->Gspos("UTPC",5 ,"UTF1", xpos,ypos,zpos,matrix[3],"ONLY"); |
| 2535 | gMC->Gspos("UTPC",5+kNlayer,"UTF1",-xpos,ypos,zpos,matrix[3],"ONLY"); |
| f73d8692 |
2536 | |
| 2537 | // Power connection panel (Al) |
| 2538 | parBox[0] = 60.0/2.0; |
| 2539 | parBox[1] = 10.0/2.0; |
| 2540 | parBox[2] = 3.0/2.0; |
| 2541 | gMC->Gsvolu("UTPP","BOX ",idtmed[1301-1],parBox,kNparBox); |
| 2542 | xpos = 0.0; |
| 2543 | ypos = 0.0; |
| 2544 | zpos = 18.0; |
| 2545 | gMC->Gspos("UTPP",1,"UTF1", xpos,ypos,zpos,0,"ONLY"); |
| 2546 | |
| 2547 | // |
| 2548 | // Electronics boxes |
| 2549 | // |
| 2550 | |
| 2551 | // Casing (INOX) |
| 2552 | parBox[0] = 60.0/2.0; |
| 2553 | parBox[1] = 10.0/2.0; |
| 2554 | parBox[2] = 6.0/2.0; |
| 2555 | gMC->Gsvolu("UTE1","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2556 | // Interior (air) |
| 2557 | parBox[0] = parBox[0] - 0.5; |
| 2558 | parBox[1] = parBox[1] - 0.5; |
| 2559 | parBox[2] = parBox[2] - 0.5; |
| 2560 | gMC->Gsvolu("UTE2","BOX ",idtmed[1302-1],parBox,kNparBox); |
| 2561 | xpos = 0.0; |
| 2562 | ypos = 0.0; |
| 2563 | zpos = 0.0; |
| 2564 | gMC->Gspos("UTE2",1,"UTE1",xpos,ypos,zpos,0,"ONLY"); |
| 2565 | xpos = 0.0; |
| 2566 | ypos = fgkSlength/2.0 - 10.0/2.0 - 3.0; |
| 2567 | zpos = -fgkSheight/2.0 + 6.0/2.0 + 1.0; |
| 2568 | gMC->Gspos("UTE1",1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 2569 | gMC->Gspos("UTE1",2,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 2570 | gMC->Gspos("UTE1",3,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 2571 | |
| 2572 | // Casing (INOX) |
| 2573 | parBox[0] = 50.0/2.0; |
| 2574 | parBox[1] = 15.0/2.0; |
| 2575 | parBox[2] = 20.0/2.0; |
| 2576 | gMC->Gsvolu("UTE3","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2577 | // Interior (air) |
| 2578 | parBox[0] = parBox[0] - 0.5; |
| 2579 | parBox[1] = parBox[1] - 0.5; |
| 2580 | parBox[2] = parBox[2] - 0.5; |
| 2581 | gMC->Gsvolu("UTE4","BOX ",idtmed[1302-1],parBox,kNparBox); |
| 2582 | xpos = 0.0; |
| 2583 | ypos = 0.0; |
| 2584 | zpos = 0.0; |
| 2585 | gMC->Gspos("UTE4",1,"UTE3",xpos,ypos,zpos,0,"ONLY"); |
| 2586 | xpos = 0.0; |
| 2587 | ypos = -fgkSlength/2.0 + 15.0/2.0 + 3.0; |
| 2588 | zpos = -fgkSheight/2.0 + 20.0/2.0 + 1.0; |
| 2589 | gMC->Gspos("UTE3",1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 2590 | gMC->Gspos("UTE3",2,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 2591 | gMC->Gspos("UTE3",3,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 2592 | |
| 2593 | // Casing (INOX) |
| 2594 | parBox[0] = 20.0/2.0; |
| 2595 | parBox[1] = 7.0/2.0; |
| 2596 | parBox[2] = 20.0/2.0; |
| 2597 | gMC->Gsvolu("UTE5","BOX ",idtmed[1308-1],parBox,kNparBox); |
| 2598 | // Interior (air) |
| 2599 | parBox[0] = parBox[0] - 0.5; |
| 2600 | parBox[1] = parBox[1] - 0.5; |
| 2601 | parBox[2] = parBox[2] - 0.5; |
| 2602 | gMC->Gsvolu("UTE6","BOX ",idtmed[1302-1],parBox,kNparBox); |
| 2603 | xpos = 0.0; |
| 2604 | ypos = 0.0; |
| 2605 | zpos = 0.0; |
| 2606 | gMC->Gspos("UTE6",1,"UTE5",xpos,ypos,zpos,0,"ONLY"); |
| 2607 | xpos = 20.0; |
| 2608 | ypos = -fgkSlength/2.0 + 7.0/2.0 + 3.0; |
| 2609 | zpos = 0.0; |
| 2610 | gMC->Gspos("UTE5",1,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 2611 | gMC->Gspos("UTE5",2,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 2612 | gMC->Gspos("UTE5",3,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 2613 | xpos = -xpos; |
| 2614 | gMC->Gspos("UTE5",4,"UTI1", xpos,ypos,zpos,0,"ONLY"); |
| 2615 | gMC->Gspos("UTE5",5,"UTI2", xpos,ypos,zpos,0,"ONLY"); |
| 2616 | gMC->Gspos("UTE5",6,"UTI3", xpos,ypos,zpos,0,"ONLY"); |
| 2617 | |
| bd0f8685 |
2618 | } |
| 2619 | |
| 2620 | //_____________________________________________________________________________ |
| 053a5ea0 |
2621 | void AliTRDgeometry::AssembleChamber(Int_t ilayer, Int_t istack) |
| f7336fa3 |
2622 | { |
| 2623 | // |
| 053a5ea0 |
2624 | // Group volumes UA, UD, UF, UU into an assembly that defines the |
| 2625 | // alignable volume of a single readout chamber |
| 0a770ac9 |
2626 | // |
| bd0f8685 |
2627 | |
| 024c0422 |
2628 | const Int_t kTag = 100; |
| 2629 | Char_t cTagV[kTag]; |
| 2630 | Char_t cTagM[kTag]; |
| bd0f8685 |
2631 | |
| 053a5ea0 |
2632 | Double_t xpos = 0.0; |
| 2633 | Double_t ypos = 0.0; |
| 2634 | Double_t zpos = 0.0; |
| bd0f8685 |
2635 | |
| 053a5ea0 |
2636 | Int_t idet = GetDetectorSec(ilayer,istack); |
| bd0f8685 |
2637 | |
| 053a5ea0 |
2638 | // Create the assembly for a given ROC |
| 024c0422 |
2639 | snprintf(cTagM,kTag,"UT%02d",idet); |
| 053a5ea0 |
2640 | TGeoVolume *roc = new TGeoVolumeAssembly(cTagM); |
| bd0f8685 |
2641 | |
| 053a5ea0 |
2642 | // Add the lower part of the chamber (aluminum frame), |
| 2643 | // including radiator and drift region |
| 2644 | xpos = 0.0; |
| 2645 | ypos = 0.0; |
| 2646 | zpos = fgkCraH/2.0 + fgkCdrH/2.0 - fgkCHsv/2.0; |
| 024c0422 |
2647 | snprintf(cTagV,kTag,"UA%02d",idet); |
| 053a5ea0 |
2648 | TGeoVolume *rocA = gGeoManager->GetVolume(cTagV); |
| 2649 | roc->AddNode(rocA,1,new TGeoTranslation(xpos,ypos,zpos)); |
| bd0f8685 |
2650 | |
| 053a5ea0 |
2651 | // Add the additional aluminum ledges |
| 225096c8 |
2652 | xpos = fgkCwidth[ilayer]/2.0 + fgkCalWmod/2.0; |
| 053a5ea0 |
2653 | ypos = 0.0; |
| 2654 | zpos = fgkCraH + fgkCdrH - fgkCalZpos - fgkCalHmod/2.0 - fgkCHsv/2.0; |
| 024c0422 |
2655 | snprintf(cTagV,kTag,"UZ%02d",idet); |
| 053a5ea0 |
2656 | TGeoVolume *rocZ = gGeoManager->GetVolume(cTagV); |
| 2657 | roc->AddNode(rocZ,1,new TGeoTranslation( xpos,ypos,zpos)); |
| 2658 | roc->AddNode(rocZ,2,new TGeoTranslation(-xpos,ypos,zpos)); |
| 2659 | |
| 2660 | // Add the additional wacosit ledges |
| 225096c8 |
2661 | xpos = fgkCwidth[ilayer]/2.0 + fgkCwsW/2.0; |
| 053a5ea0 |
2662 | ypos = 0.0; |
| 2663 | zpos = fgkCraH + fgkCdrH - fgkCwsH/2.0 - fgkCHsv/2.0; |
| 024c0422 |
2664 | snprintf(cTagV,kTag,"UP%02d",idet); |
| 053a5ea0 |
2665 | TGeoVolume *rocP = gGeoManager->GetVolume(cTagV); |
| 2666 | roc->AddNode(rocP,1,new TGeoTranslation( xpos,ypos,zpos)); |
| 2667 | roc->AddNode(rocP,2,new TGeoTranslation(-xpos,ypos,zpos)); |
| 2668 | |
| 2669 | // Add the middle part of the chamber (G10 frame), |
| 2670 | // including amplification region |
| 2671 | xpos = 0.0; |
| 2672 | ypos = 0.0; |
| 2673 | zpos = fgkCamH/2.0 + fgkCraH + fgkCdrH - fgkCHsv/2.0; |
| 024c0422 |
2674 | snprintf(cTagV,kTag,"UD%02d",idet); |
| 053a5ea0 |
2675 | TGeoVolume *rocD = gGeoManager->GetVolume(cTagV); |
| 2676 | roc->AddNode(rocD,1,new TGeoTranslation(xpos,ypos,zpos)); |
| bd0f8685 |
2677 | |
| 053a5ea0 |
2678 | // Add the upper part of the chamber (aluminum frame), |
| 2679 | // including back panel and FEE |
| 2680 | xpos = 0.0; |
| 2681 | ypos = 0.0; |
| 2682 | zpos = fgkCroH/2.0 + fgkCamH + fgkCraH + fgkCdrH - fgkCHsv/2.0; |
| 024c0422 |
2683 | snprintf(cTagV,kTag,"UF%02d",idet); |
| 053a5ea0 |
2684 | TGeoVolume *rocF = gGeoManager->GetVolume(cTagV); |
| 2685 | roc->AddNode(rocF,1,new TGeoTranslation(xpos,ypos,zpos)); |
| bd0f8685 |
2686 | |
| 053a5ea0 |
2687 | // Add the volume with services on top of the back panel |
| 2688 | xpos = 0.0; |
| 2689 | ypos = 0.0; |
| 2690 | zpos = fgkCsvH/2.0 + fgkCroH + fgkCamH + fgkCraH + fgkCdrH - fgkCHsv/2.0; |
| 024c0422 |
2691 | snprintf(cTagV,kTag,"UU%02d",idet); |
| 053a5ea0 |
2692 | TGeoVolume *rocU = gGeoManager->GetVolume(cTagV); |
| 2693 | roc->AddNode(rocU,1,new TGeoTranslation(xpos,ypos,zpos)); |
| bd0f8685 |
2694 | |
| 053a5ea0 |
2695 | // Place the ROC assembly into the super modules |
| 2696 | xpos = 0.0; |
| 2697 | ypos = 0.0; |
| 225096c8 |
2698 | ypos = fgkClength[ilayer][0] + fgkClength[ilayer][1] + fgkClength[ilayer][2]/2.0; |
| 053a5ea0 |
2699 | for (Int_t ic = 0; ic < istack; ic++) { |
| 225096c8 |
2700 | ypos -= fgkClength[ilayer][ic]; |
| bd0f8685 |
2701 | } |
| 225096c8 |
2702 | ypos -= fgkClength[ilayer][istack]/2.0; |
| 053a5ea0 |
2703 | zpos = fgkVrocsm + fgkSMpltT + fgkCHsv/2.0 - fgkSheight/2.0 |
| 2704 | + ilayer * (fgkCH + fgkVspace); |
| 2705 | TGeoVolume *sm1 = gGeoManager->GetVolume("UTI1"); |
| 2706 | TGeoVolume *sm2 = gGeoManager->GetVolume("UTI2"); |
| 2707 | TGeoVolume *sm3 = gGeoManager->GetVolume("UTI3"); |
| 2708 | sm1->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos)); |
| 2709 | sm2->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos)); |
| 053767a4 |
2710 | if (istack != 2) { |
| 053a5ea0 |
2711 | // w/o middle stack |
| 2712 | sm3->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos)); |
| e7014565 |
2713 | } |
| f7336fa3 |
2714 | |
| 2715 | } |
| 2716 | |
| 25ca55ce |
2717 | //_____________________________________________________________________________ |
| e74d6d1b |
2718 | Bool_t AliTRDgeometry::RotateBack(Int_t det |
| 2719 | , const Double_t * const loc |
| 2720 | , Double_t *glb) const |
| 25ca55ce |
2721 | { |
| 2722 | // |
| 2669905c |
2723 | // Rotates a chambers to transform the corresponding local frame |
| 2724 | // coordinates <loc> into the coordinates of the ALICE restframe <glb>. |
| 25ca55ce |
2725 | // |
| 2726 | |
| b29bcb3a |
2727 | Int_t sector = GetSector(det); |
| 2728 | Float_t phi = 2.0 * TMath::Pi() / (Float_t) fgkNsector * ((Float_t) sector + 0.5); |
| 25ca55ce |
2729 | |
| b29bcb3a |
2730 | glb[0] = loc[0] * TMath::Cos(phi) - loc[1] * TMath::Sin(phi); |
| 2731 | glb[1] = loc[0] * TMath::Sin(phi) + loc[1] * TMath::Cos(phi); |
| 2669905c |
2732 | glb[2] = loc[2]; |
| f7336fa3 |
2733 | |
| 2734 | return kTRUE; |
| 2735 | |
| 2736 | } |
| 2737 | |
| 2738 | //_____________________________________________________________________________ |
| 053767a4 |
2739 | Int_t AliTRDgeometry::GetDetectorSec(Int_t layer, Int_t stack) |
| 0a770ac9 |
2740 | { |
| 2741 | // |
| 053767a4 |
2742 | // Convert plane / stack into detector number for one single sector |
| 0a770ac9 |
2743 | // |
| 2744 | |
| 053767a4 |
2745 | return (layer + stack * fgkNlayer); |
| 0a770ac9 |
2746 | |
| 2747 | } |
| 2748 | |
| 2749 | //_____________________________________________________________________________ |
| 053767a4 |
2750 | Int_t AliTRDgeometry::GetDetector(Int_t layer, Int_t stack, Int_t sector) |
| f7336fa3 |
2751 | { |
| 2752 | // |
| 053767a4 |
2753 | // Convert layer / stack / sector into detector number |
| f7336fa3 |
2754 | // |
| 2755 | |
| 053767a4 |
2756 | return (layer + stack * fgkNlayer + sector * fgkNlayer * fgkNstack); |
| f7336fa3 |
2757 | |
| 2758 | } |
| 2759 | |
| 2760 | //_____________________________________________________________________________ |
| 053767a4 |
2761 | Int_t AliTRDgeometry::GetLayer(Int_t det) |
| f7336fa3 |
2762 | { |
| 2763 | // |
| 053767a4 |
2764 | // Reconstruct the layer number from the detector number |
| f7336fa3 |
2765 | // |
| 2766 | |
| 053767a4 |
2767 | return ((Int_t) (det % fgkNlayer)); |
| f7336fa3 |
2768 | |
| 2769 | } |
| 2770 | |
| 2771 | //_____________________________________________________________________________ |
| 44024ed3 |
2772 | Int_t AliTRDgeometry::GetStack(Int_t det) |
| f7336fa3 |
2773 | { |
| 2774 | // |
| 053767a4 |
2775 | // Reconstruct the stack number from the detector number |
| f7336fa3 |
2776 | // |
| 2777 | |
| 053767a4 |
2778 | return ((Int_t) (det % (fgkNlayer * fgkNstack)) / fgkNlayer); |
| f7336fa3 |
2779 | |
| 2780 | } |
| 2781 | |
| d9950a5a |
2782 | //_____________________________________________________________________________ |
| 053767a4 |
2783 | Int_t AliTRDgeometry::GetStack(Double_t z, Int_t layer) |
| d9950a5a |
2784 | { |
| 2785 | // |
| 053767a4 |
2786 | // Reconstruct the chamber number from the z position and layer number |
| d9950a5a |
2787 | // |
| f73d8692 |
2788 | // The return function has to be protected for positiveness !! |
| 2789 | // |
| d9950a5a |
2790 | |
| 053767a4 |
2791 | if ((layer < 0) || |
| 2792 | (layer >= fgkNlayer)) return -1; |
| d9950a5a |
2793 | |
| 053767a4 |
2794 | Int_t istck = fgkNstack; |
| 86a9e36c |
2795 | Double_t zmin = 0.0; |
| 2796 | Double_t zmax = 0.0; |
| f73d8692 |
2797 | |
| 2798 | do { |
| 053767a4 |
2799 | istck--; |
| 2800 | if (istck < 0) break; |
| 2801 | AliTRDpadPlane *pp = GetPadPlane(layer,istck); |
| 0906e73e |
2802 | zmax = pp->GetRow0(); |
| f73d8692 |
2803 | Int_t nrows = pp->GetNrows(); |
| 2804 | zmin = zmax - 2 * pp->GetLengthOPad() |
| 2805 | - (nrows-2) * pp->GetLengthIPad() |
| 2806 | - (nrows-1) * pp->GetRowSpacing(); |
| 2807 | } while((z < zmin) || (z > zmax)); |
| d9950a5a |
2808 | |
| 053767a4 |
2809 | return istck; |
| d9950a5a |
2810 | |
| f73d8692 |
2811 | } |
| 0906e73e |
2812 | |
| f7336fa3 |
2813 | //_____________________________________________________________________________ |
| 44024ed3 |
2814 | Int_t AliTRDgeometry::GetSector(Int_t det) |
| f7336fa3 |
2815 | { |
| 2816 | // |
| 2817 | // Reconstruct the sector number from the detector number |
| 2818 | // |
| 2819 | |
| 053767a4 |
2820 | return ((Int_t) (det / (fgkNlayer * fgkNstack))); |
| f7336fa3 |
2821 | |
| 2822 | } |
| 2823 | |
| 7925de54 |
2824 | //_____________________________________________________________________________ |
| 053767a4 |
2825 | AliTRDpadPlane *AliTRDgeometry::GetPadPlane(Int_t layer, Int_t stack) |
| 7925de54 |
2826 | { |
| f162af62 |
2827 | // |
| 053767a4 |
2828 | // Returns the pad plane for a given plane <pl> and stack <st> number |
| f162af62 |
2829 | // |
| 7925de54 |
2830 | |
| 225096c8 |
2831 | if (!fgPadPlaneArray) { |
| f162af62 |
2832 | CreatePadPlaneArray(); |
| 2833 | } |
| 2834 | |
| 053767a4 |
2835 | Int_t ipp = GetDetectorSec(layer,stack); |
| 225096c8 |
2836 | return ((AliTRDpadPlane *) fgPadPlaneArray->At(ipp)); |
| f162af62 |
2837 | |
| 2838 | } |
| 2839 | |
| 2840 | //_____________________________________________________________________________ |
| 053767a4 |
2841 | Int_t AliTRDgeometry::GetRowMax(Int_t layer, Int_t stack, Int_t /*sector*/) |
| f162af62 |
2842 | { |
| 2843 | // |
| 2844 | // Returns the number of rows on the pad plane |
| 2845 | // |
| 2846 | |
| 053767a4 |
2847 | return GetPadPlane(layer,stack)->GetNrows(); |
| f162af62 |
2848 | |
| 2849 | } |
| 2850 | |
| 2851 | //_____________________________________________________________________________ |
| 053767a4 |
2852 | Int_t AliTRDgeometry::GetColMax(Int_t layer) |
| f162af62 |
2853 | { |
| 2854 | // |
| 2855 | // Returns the number of rows on the pad plane |
| 2856 | // |
| 2857 | |
| 053767a4 |
2858 | return GetPadPlane(layer,0)->GetNcols(); |
| f162af62 |
2859 | |
| 2860 | } |
| 2861 | |
| 2862 | //_____________________________________________________________________________ |
| 053767a4 |
2863 | Double_t AliTRDgeometry::GetRow0(Int_t layer, Int_t stack, Int_t /*sector*/) |
| f162af62 |
2864 | { |
| 2865 | // |
| 2866 | // Returns the position of the border of the first pad in a row |
| 2867 | // |
| 2868 | |
| 053767a4 |
2869 | return GetPadPlane(layer,stack)->GetRow0(); |
| f162af62 |
2870 | |
| 2871 | } |
| 2872 | |
| 2873 | //_____________________________________________________________________________ |
| 053767a4 |
2874 | Double_t AliTRDgeometry::GetCol0(Int_t layer) |
| f162af62 |
2875 | { |
| 2876 | // |
| 2877 | // Returns the position of the border of the first pad in a column |
| 2878 | // |
| 2879 | |
| 053767a4 |
2880 | return GetPadPlane(layer,0)->GetCol0(); |
| f162af62 |
2881 | |
| 2882 | } |
| 2883 | |
| b4a9cd27 |
2884 | //_____________________________________________________________________________ |
| 9a96f175 |
2885 | Bool_t AliTRDgeometry::CreateClusterMatrixArray() |
| bd0f8685 |
2886 | { |
| b4a9cd27 |
2887 | // |
| 9a96f175 |
2888 | // Create the matrices to transform cluster coordinates from the |
| 2889 | // local chamber system to the tracking coordinate system |
| b4a9cd27 |
2890 | // |
| 2891 | |
| 030b4415 |
2892 | if (!gGeoManager) { |
| 2893 | return kFALSE; |
| 2894 | } |
| 0a5f3331 |
2895 | |
| 225096c8 |
2896 | if(fgClusterMatrixArray) |
| 2897 | return kTRUE; |
| 2898 | |
| 18c05eb3 |
2899 | TString volPath; |
| 2900 | TString vpStr = "ALIC_1/B077_1/BSEGMO"; |
| 2901 | TString vpApp1 = "_1/BTRD"; |
| 2902 | TString vpApp2 = "_1"; |
| 2903 | TString vpApp3a = "/UTR1_1/UTS1_1/UTI1_1"; |
| 2904 | TString vpApp3b = "/UTR2_1/UTS2_1/UTI2_1"; |
| 2905 | TString vpApp3c = "/UTR3_1/UTS3_1/UTI3_1"; |
| 2906 | |
| 225096c8 |
2907 | fgClusterMatrixArray = new TObjArray(kNdet); |
| 90dbf5fb |
2908 | AliAlignObjParams o; |
| bd0f8685 |
2909 | |
| ae079791 |
2910 | for (Int_t iLayer = AliGeomManager::kTRD1; iLayer <= AliGeomManager::kTRD6; iLayer++) { |
| 2911 | for (Int_t iModule = 0; iModule < AliGeomManager::LayerSize(iLayer); iModule++) { |
| 02cb65d6 |
2912 | |
| 053767a4 |
2913 | Int_t isector = iModule/Nstack(); |
| 2914 | Int_t istack = iModule%Nstack(); |
| 02cb65d6 |
2915 | Int_t iLayerTRD = iLayer - AliGeomManager::kTRD1; |
| 053767a4 |
2916 | Int_t lid = GetDetector(iLayerTRD,istack,isector); |
| 02cb65d6 |
2917 | |
| 18c05eb3 |
2918 | // Check for disabled supermodules |
| 2919 | volPath = vpStr; |
| 2920 | volPath += isector; |
| 2921 | volPath += vpApp1; |
| 2922 | volPath += isector; |
| 2923 | volPath += vpApp2; |
| 2924 | switch (isector) { |
| 2925 | case 13: |
| 2926 | case 14: |
| 2927 | case 15: |
| af63084f |
2928 | // Check for holes in from of PHOS |
| 18c05eb3 |
2929 | if (istack == 2) { |
| 2930 | continue; |
| 2931 | } |
| 2932 | volPath += vpApp3c; |
| 2933 | break; |
| 2934 | case 11: |
| 2935 | case 12: |
| 2936 | volPath += vpApp3b; |
| 2937 | break; |
| 2938 | default: |
| 2939 | volPath += vpApp3a; |
| 2940 | }; |
| 2941 | if (!gGeoManager->CheckPath(volPath)) { |
| 2942 | continue; |
| 2943 | } |
| 030b4415 |
2944 | |
| ae079791 |
2945 | UShort_t volid = AliGeomManager::LayerToVolUID(iLayer,iModule); |
| 2946 | const char *symname = AliGeomManager::SymName(volid); |
| 0a5f3331 |
2947 | TGeoPNEntry *pne = gGeoManager->GetAlignableEntry(symname); |
| 2948 | const char *path = symname; |
| 2949 | if (pne) { |
| 2950 | path = pne->GetTitle(); |
| 2951 | } |
| 0453d10c |
2952 | else { |
| 2953 | continue; |
| 2954 | } |
| 9a96f175 |
2955 | if (!strstr(path,"ALIC")) { |
| 6a9169ee |
2956 | AliDebugClass(1,Form("Not a valid path: %s\n",path)); |
| 9a96f175 |
2957 | continue; |
| 2958 | } |
| 0a5f3331 |
2959 | if (!gGeoManager->cd(path)) { |
| 6a9169ee |
2960 | AliErrorClass(Form("Cannot go to path: %s\n",path)); |
| 9a96f175 |
2961 | continue; |
| 0a5f3331 |
2962 | } |
| c127f13a |
2963 | TGeoHMatrix *m = gGeoManager->GetCurrentMatrix(); |
| 25ca55ce |
2964 | |
| 2965 | TGeoRotation mchange; |
| 2966 | mchange.RotateY(90); |
| c127f13a |
2967 | mchange.RotateX(90); |
| 2968 | |
| c127f13a |
2969 | // |
| 2970 | // Cluster transformation matrix |
| 2971 | // |
| 2972 | TGeoHMatrix rotMatrix(mchange.Inverse()); |
| 2973 | rotMatrix.MultiplyLeft(m); |
| 030b4415 |
2974 | Double_t sectorAngle = 20.0 * (isector % 18) + 10.0; |
| c127f13a |
2975 | TGeoHMatrix rotSector; |
| b4a9cd27 |
2976 | rotSector.RotateZ(sectorAngle); |
| 8a497c18 |
2977 | rotMatrix.MultiplyLeft(&rotSector.Inverse()); |
| c127f13a |
2978 | |
| 225096c8 |
2979 | fgClusterMatrixArray->AddAt(new TGeoHMatrix(rotMatrix),lid); |
| bd0f8685 |
2980 | |
| 25ca55ce |
2981 | } |
| b4a9cd27 |
2982 | } |
| bd0f8685 |
2983 | |
| b4a9cd27 |
2984 | return kTRUE; |
| b4a9cd27 |
2985 | |
| bd0f8685 |
2986 | } |
| 25ca55ce |
2987 | |
| 9bf8c575 |
2988 | //_____________________________________________________________________________ |
| de406abf |
2989 | TGeoHMatrix *AliTRDgeometry::GetClusterMatrix(Int_t det) |
| 9bf8c575 |
2990 | { |
| 2991 | // |
| de406abf |
2992 | // Returns the cluster transformation matrix for a given detector |
| 9bf8c575 |
2993 | // |
| 2994 | |
| 225096c8 |
2995 | if (!fgClusterMatrixArray) { |
| de406abf |
2996 | if (!CreateClusterMatrixArray()) { |
| 2997 | return NULL; |
| 2998 | } |
| 9bf8c575 |
2999 | } |
| 225096c8 |
3000 | return (TGeoHMatrix *) fgClusterMatrixArray->At(det); |
| de406abf |
3001 | |
| 3002 | } |
| 3003 | |
| 3004 | //_____________________________________________________________________________ |
| 3005 | Bool_t AliTRDgeometry::ChamberInGeometry(Int_t det) |
| 3006 | { |
| 3007 | // |
| 3008 | // Checks whether the given detector is part of the current geometry |
| 3009 | // |
| 9bf8c575 |
3010 | |
| 3011 | if (!GetClusterMatrix(det)) { |
| 3012 | return kFALSE; |
| 3013 | } |
| 3014 | else { |
| 3015 | return kTRUE; |
| 3016 | } |
| 3017 | |
| 3018 | } |
| 2f504fcc |
3019 | |
| 3020 | //_____________________________________________________________________________ |
| 3021 | Bool_t AliTRDgeometry::IsHole(Int_t /*la*/, Int_t st, Int_t se) const |
| 3022 | { |
| 3023 | // |
| 3024 | // Checks for holes in front of PHOS |
| 3025 | // |
| 3026 | |
| 3027 | if (((se == 13) || (se == 14) || (se == 15)) && |
| 3028 | (st == 2)) { |
| 3029 | return kTRUE; |
| 3030 | } |
| 053a5ea0 |
3031 | |
| 2f504fcc |
3032 | return kFALSE; |
| 053a5ea0 |
3033 | |
| eb2b4f91 |
3034 | } |
| 2f504fcc |
3035 | |
| eb2b4f91 |
3036 | //_____________________________________________________________________________ |
| 3037 | Bool_t AliTRDgeometry::IsOnBoundary(Int_t det, Float_t y, Float_t z, Float_t eps) const |
| 3038 | { |
| 053a5ea0 |
3039 | // |
| 3040 | // Checks whether position is at the boundary of the sensitive volume |
| 3041 | // |
| 3042 | |
| eb2b4f91 |
3043 | Int_t ly = GetLayer(det); |
| 3044 | if ((ly < 0) || |
| 3045 | (ly >= fgkNlayer)) return kTRUE; |
| 3046 | |
| 3047 | Int_t stk = GetStack(det); |
| 3048 | if ((stk < 0) || |
| 3049 | (stk >= fgkNstack)) return kTRUE; |
| 3050 | |
| 225096c8 |
3051 | AliTRDpadPlane *pp = (AliTRDpadPlane*) fgPadPlaneArray->At(GetDetectorSec(ly, stk)); |
| eb2b4f91 |
3052 | if(!pp) return kTRUE; |
| 3053 | |
| 3054 | Double_t max = pp->GetRow0(); |
| 3055 | Int_t n = pp->GetNrows(); |
| 3056 | Double_t min = max - 2 * pp->GetLengthOPad() |
| 3057 | - (n-2) * pp->GetLengthIPad() |
| 3058 | - (n-1) * pp->GetRowSpacing(); |
| 3059 | if(z < min+eps || z > max-eps){ |
| 3060 | //printf("z : min[%7.2f (%7.2f)] %7.2f max[(%7.2f) %7.2f]\n", min, min+eps, z, max-eps, max); |
| 3061 | return kTRUE; |
| 3062 | } |
| 3063 | min = pp->GetCol0(); |
| 3064 | n = pp->GetNcols(); |
| 3065 | max = min +2 * pp->GetWidthOPad() |
| 3066 | + (n-2) * pp->GetWidthIPad() |
| 3067 | + (n-1) * pp->GetColSpacing(); |
| 3068 | if(y < min+eps || y > max-eps){ |
| 3069 | //printf("y : min[%7.2f (%7.2f)] %7.2f max[(%7.2f) %7.2f]\n", min, min+eps, y, max-eps, max); |
| 3070 | return kTRUE; |
| 3071 | } |
| 053a5ea0 |
3072 | |
| eb2b4f91 |
3073 | return kFALSE; |
| 053a5ea0 |
3074 | |
| 2f504fcc |
3075 | } |
git://git.uio.no / u / mrichter / AliRoot.git / blame