68ca986e |
1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
3 | * * |
4 | * Author: The ALICE Off-line Project. * |
5 | * Contributors are mentioned in the code where appropriate. * |
6 | * * |
7 | * Permission to use, copy, modify and distribute this software and its * |
8 | * documentation strictly for non-commercial purposes is hereby granted * |
9 | * without fee, provided that the above copyright notice appears in all * |
10 | * copies and that both the copyright notice and this permission notice * |
11 | * appear in the supporting documentation. The authors make no claims * |
12 | * about the suitability of this software for any purpose. It is * |
13 | * provided "as is" without express or implied warranty. * |
14 | **************************************************************************/ |
15 | |
16 | /* |
17 | $Log$ |
0014adbc |
18 | Revision 1.16 2001/03/15 16:12:04 coppedis |
19 | Code review |
20 | |
5a881c97 |
21 | Revision 1.15 2001/03/12 17:47:56 hristov |
22 | Changes needed on Sun with CC 5.0 |
23 | |
5cf7bbad |
24 | Revision 1.14 2001/02/23 16:48:28 coppedis |
25 | Correct bug in ZEM hit definition |
26 | |
0c9b76ab |
27 | Revision 1.13 2001/02/07 18:07:41 coppedis |
28 | Modif for splitting |
29 | |
7d285fe3 |
30 | Revision 1.12 2001/01/26 19:56:27 hristov |
31 | Major upgrade of AliRoot code |
32 | |
2ab0c725 |
33 | Revision 1.11 2001/01/16 07:43:33 hristov |
34 | Initialisation of ZDC hits |
35 | |
de6bc247 |
36 | Revision 1.10 2000/12/14 15:20:02 coppedis |
37 | Hits2Digits method for digitization |
38 | |
cc9c0243 |
39 | Revision 1.9 2000/12/13 10:33:49 coppedis |
40 | Prints only if fDebug==1 |
41 | |
9d7316ac |
42 | Revision 1.8 2000/12/12 14:10:02 coppedis |
43 | Correction suggested by M. Masera |
44 | |
bdee0299 |
45 | Revision 1.7 2000/11/30 17:23:47 coppedis |
46 | Remove first corrector dipole and introduce digitization |
47 | |
5ce39387 |
48 | Revision 1.6 2000/11/22 11:33:10 coppedis |
49 | Major code revision |
50 | |
866ab5a2 |
51 | Revision 1.5 2000/10/02 21:28:20 fca |
52 | Removal of useless dependecies via forward declarations |
53 | |
54 | Revision 1.3.2.1 2000/08/24 09:25:47 hristov |
55 | Patch by P.Hristov: Bug in ZDC geometry corrected by E.Scomparin |
56 | |
94de3818 |
57 | Revision 1.4 2000/08/24 09:23:59 hristov |
58 | Bug in ZDC geometry corrected by E.Scomparin |
59 | |
0500bdfc |
60 | Revision 1.3 2000/07/12 06:59:16 fca |
61 | Fixing dimension of hits array |
62 | |
366ff5c2 |
63 | Revision 1.2 2000/07/11 11:12:34 fca |
64 | Some syntax corrections for non standard HP aCC |
65 | |
c0ceba4c |
66 | Revision 1.1 2000/07/10 13:58:01 fca |
5a881c97 |
67 | New version of ZDC from E.Scomparin & C.Oppedisano |
c0ceba4c |
68 | |
68ca986e |
69 | Revision 1.7 2000/01/19 17:17:40 fca |
70 | |
71 | Revision 1.6 1999/09/29 09:24:35 fca |
72 | Introduction of the Copyright and cvs Log |
73 | |
74 | */ |
75 | |
76 | /////////////////////////////////////////////////////////////////////////////// |
77 | // // |
78 | // Zero Degree Calorimeter // |
866ab5a2 |
79 | // This class contains the basic functions for the ZDC // |
80 | // Functions specific to one particular geometry are // |
68ca986e |
81 | // contained in the derived classes // |
82 | // // |
83 | /////////////////////////////////////////////////////////////////////////////// |
84 | |
cc9c0243 |
85 | // --- Standard libraries |
86 | #include "stdio.h" |
87 | |
5ce39387 |
88 | // --- ROOT system |
68ca986e |
89 | #include <TBRIK.h> |
90 | #include <TNode.h> |
91 | #include <TMath.h> |
5ce39387 |
92 | #include <TRandom.h> |
866ab5a2 |
93 | #include <TSystem.h> |
5ce39387 |
94 | #include <TTree.h> |
68ca986e |
95 | |
5ce39387 |
96 | |
97 | // --- AliRoot classes |
68ca986e |
98 | #include "AliZDCv1.h" |
5ce39387 |
99 | #include "AliZDCHit.h" |
100 | #include "AliZDCDigit.h" |
68ca986e |
101 | #include "AliRun.h" |
5ce39387 |
102 | #include "AliDetector.h" |
94de3818 |
103 | #include "AliMagF.h" |
68ca986e |
104 | #include "AliMC.h" |
105 | #include "AliCallf77.h" |
106 | #include "AliConst.h" |
107 | #include "AliPDG.h" |
5ce39387 |
108 | #include "TLorentzVector.h" |
68ca986e |
109 | |
110 | |
111 | ClassImp(AliZDCv1) |
112 | |
113 | |
114 | /////////////////////////////////////////////////////////////////////////////// |
115 | // // |
116 | // Zero Degree Calorimeter version 1 // |
117 | // // |
118 | /////////////////////////////////////////////////////////////////////////////// |
119 | |
120 | //_____________________________________________________________________________ |
121 | AliZDCv1::AliZDCv1() : AliZDC() |
122 | { |
123 | // |
124 | // Default constructor for Zero Degree Calorimeter |
125 | // |
5ce39387 |
126 | |
866ab5a2 |
127 | fMedSensF1 = 0; |
128 | fMedSensF2 = 0; |
129 | fMedSensZN = 0; |
130 | fMedSensZP = 0; |
866ab5a2 |
131 | fMedSensZEM = 0; |
5a881c97 |
132 | fMedSensGR = 0; |
866ab5a2 |
133 | fMedSensPI = 0; |
68ca986e |
134 | } |
135 | |
136 | //_____________________________________________________________________________ |
137 | AliZDCv1::AliZDCv1(const char *name, const char *title) |
138 | : AliZDC(name,title) |
139 | { |
140 | // |
141 | // Standard constructor for Zero Degree Calorimeter |
142 | // |
5ce39387 |
143 | |
866ab5a2 |
144 | fMedSensF1 = 0; |
145 | fMedSensF2 = 0; |
146 | fMedSensZN = 0; |
147 | fMedSensZP = 0; |
866ab5a2 |
148 | fMedSensZEM = 0; |
5a881c97 |
149 | fMedSensGR = 0; |
866ab5a2 |
150 | fMedSensPI = 0; |
5a881c97 |
151 | |
152 | |
153 | // Parameters for light tables |
154 | fNalfan = 90; // Number of Alfa (neutrons) |
155 | fNalfap = 90; // Number of Alfa (protons) |
156 | fNben = 18; // Number of beta (neutrons) |
157 | fNbep = 28; // Number of beta (protons) |
158 | Int_t ip,jp,kp; |
159 | for(ip=0; ip<4; ip++){ |
160 | for(kp=0; kp<fNalfap; kp++){ |
161 | for(jp=0; jp<fNbep; jp++){ |
162 | fTablep[ip][kp][jp] = 0; |
163 | } |
164 | } |
165 | } |
166 | Int_t in,jn,kn; |
167 | for(in=0; in<4; in++){ |
168 | for(kn=0; kn<fNalfan; kn++){ |
169 | for(jn=0; jn<fNben; jn++){ |
170 | fTablen[in][kn][jn] = 0; |
171 | } |
172 | } |
173 | } |
174 | |
175 | // Parameters for hadronic calorimeters geometry |
176 | fDimZP[0] = 11.2; |
177 | fDimZP[1] = 6.; |
178 | fDimZP[2] = 75.; |
179 | fPosZN[0] = 0.; |
180 | fPosZN[1] = 0.; |
181 | fPosZN[2] = 11650.; |
182 | fPosZP[0] = -23.; |
183 | fPosZP[1] = 0.; |
184 | fPosZP[2] = 11600.; |
185 | fFibZN[0] = 0.; |
186 | fFibZN[1] = 0.01825; |
187 | fFibZN[2] = 50.; |
188 | fFibZP[0] = 0.; |
189 | fFibZP[1] = 0.0275; |
190 | fFibZP[2] = 75.; |
191 | |
192 | // Parameters for EM calorimeter geometry |
193 | fPosZEM[0] = 0.; |
194 | fPosZEM[1] = 5.8; |
195 | fPosZEM[2] = 11600.; |
196 | |
197 | |
198 | fDigits = new TClonesArray("AliZDCDigit",1000); |
68ca986e |
199 | } |
200 | |
201 | //_____________________________________________________________________________ |
202 | void AliZDCv1::CreateGeometry() |
203 | { |
204 | // |
205 | // Create the geometry for the Zero Degree Calorimeter version 1 |
206 | //* Initialize COMMON block ZDC_CGEOM |
207 | //* |
208 | |
209 | CreateBeamLine(); |
210 | CreateZDC(); |
211 | } |
212 | |
213 | //_____________________________________________________________________________ |
214 | void AliZDCv1::CreateBeamLine() |
215 | { |
216 | |
5a881c97 |
217 | Float_t angle, zq, conpar[9], elpar[3], tubpar[3], zd1, zd2; |
68ca986e |
218 | Int_t im1, im2; |
68ca986e |
219 | |
220 | Int_t *idtmed = fIdtmed->GetArray(); |
221 | |
5a881c97 |
222 | // -- Mother of the ZDCs |
68ca986e |
223 | |
224 | conpar[0] = 0.; |
225 | conpar[1] = 360.; |
226 | conpar[2] = 2.; |
0014adbc |
227 | conpar[3] = 2000.; |
68ca986e |
228 | conpar[4] = 0.; |
229 | conpar[5] = 55.; |
230 | conpar[6] = 13060.; |
231 | conpar[7] = 0.; |
232 | conpar[8] = 55.; |
233 | gMC->Gsvolu("ZDC ", "PCON", idtmed[10], conpar, 9); |
234 | gMC->Gspos("ZDC ", 1, "ALIC", 0., 0., 0., 0, "ONLY"); |
235 | |
236 | // -- FIRST SECTION OF THE BEAM PIPE (from compensator dipole to |
237 | // beginning of D1) |
238 | |
0014adbc |
239 | zd1 = 2000.; |
68ca986e |
240 | |
241 | tubpar[0] = 6.3/2.; |
242 | tubpar[1] = 6.7/2.; |
0014adbc |
243 | tubpar[2] = 3838.3/2.; |
68ca986e |
244 | gMC->Gsvolu("P001", "TUBE", idtmed[5], tubpar, 3); |
245 | gMC->Gspos("P001", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
246 | |
247 | //-- SECOND SECTION OF THE BEAM PIPE (FROM THE END OF D1 TO THE BEGINNING OF |
248 | // D2) |
249 | |
0014adbc |
250 | //-- FROM MAGNETIC BEGINNING OF D1 TO MAGNETIC END OF D1 + 23.5 cm |
251 | //-- Elliptic pipe -> ELLIPTIC PIPE NOT INSERTED FOR THE MOMENT! |
68ca986e |
252 | |
0014adbc |
253 | //-> D1 begins at (6310.8-472.5) |
68ca986e |
254 | zd1 = 6310.8-472.5; |
255 | |
256 | elpar[0] = 6.84/2.; |
257 | elpar[1] = 5.86/2.; |
258 | elpar[2] = 945./2.; |
866ab5a2 |
259 | // gMC->Gsvolu("E001", "ELTU", idtmed[5], elpar, 3); |
260 | // gMC->Gspos("E001", 1, "ZDC ", 0., 0., elpar[2] + zd1, 0, "ONLY"); |
261 | // |
68ca986e |
262 | elpar[0] = 6.44/2.; |
263 | elpar[1] = 5.46/2.; |
264 | elpar[2] = 945./2.; |
866ab5a2 |
265 | // gMC->Gsvolu("E002", "ELTU", idtmed[10], elpar, 3); |
266 | // gMC->Gspos("E002", 1, "E001", 0., 0., 0., 0, "ONLY"); |
68ca986e |
267 | |
268 | zd1 += 2.*elpar[2]; |
269 | |
270 | elpar[0] = 6.84/2.; |
271 | elpar[1] = 5.86/2.; |
272 | elpar[2] = 13.5/2.; |
866ab5a2 |
273 | // gMC->Gsvolu("E003", "ELTU", idtmed[5], elpar, 3); |
274 | // gMC->Gspos("E002", 1, "ZDC ", 0., 0., elpar[2] + zd1, 0, "ONLY"); |
68ca986e |
275 | |
276 | elpar[0] = 6.44/2.; |
277 | elpar[1] = 5.46/2.; |
278 | elpar[2] = 13.5/2.; |
866ab5a2 |
279 | // gMC->Gsvolu("E004", "ELTU", idtmed[10], elpar, 3); |
280 | // gMC->Gspos("E004", 1, "E003", 0., 0., 0., 0, "ONLY"); |
68ca986e |
281 | |
282 | zd1 += 2.*elpar[2]; |
283 | |
284 | conpar[0] = 25./2.; |
285 | conpar[1] = 6.44/2.; |
286 | conpar[2] = 6.84/2.; |
287 | conpar[3] = 10./2.; |
288 | conpar[4] = 10.4/2.; |
289 | gMC->Gsvolu("C001", "CONE", idtmed[5], conpar, 5); |
290 | gMC->Gspos("C001", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); |
291 | |
292 | zd1 += 2.*conpar[0]; |
293 | |
294 | tubpar[0] = 10./2.; |
295 | tubpar[1] = 10.4/2.; |
296 | tubpar[2] = 50./2.; |
297 | gMC->Gsvolu("P002", "TUBE", idtmed[5], tubpar, 3); |
298 | gMC->Gspos("P002", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
299 | |
5a881c97 |
300 | zd1 += tubpar[2]*2.; |
68ca986e |
301 | |
302 | tubpar[0] = 10./2.; |
303 | tubpar[1] = 10.4/2.; |
304 | tubpar[2] = 10./2.; |
305 | gMC->Gsvolu("P003", "TUBE", idtmed[5], tubpar, 3); |
306 | gMC->Gspos("P003", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
307 | |
308 | zd1 += tubpar[2] * 2.; |
309 | |
310 | tubpar[0] = 10./2.; |
311 | tubpar[1] = 10.4/2.; |
312 | tubpar[2] = 3.16/2.; |
313 | gMC->Gsvolu("P004", "TUBE", idtmed[5], tubpar, 3); |
314 | gMC->Gspos("P004", 1, "ZDC ", 0., 0., tubpar[0] + zd1, 0, "ONLY"); |
315 | |
316 | zd1 += tubpar[2] * 2.; |
317 | |
318 | tubpar[0] = 10.0/2.; |
319 | tubpar[1] = 10.4/2; |
320 | tubpar[2] = 190./2.; |
321 | gMC->Gsvolu("P005", "TUBE", idtmed[5], tubpar, 3); |
322 | gMC->Gspos("P005", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
323 | |
324 | zd1 += tubpar[2] * 2.; |
325 | |
326 | conpar[0] = 30./2.; |
327 | conpar[1] = 10./2.; |
328 | conpar[2] = 10.4/2.; |
329 | conpar[3] = 20.6/2.; |
330 | conpar[4] = 21./2.; |
331 | gMC->Gsvolu("P006", "CONE", idtmed[5], conpar, 5); |
332 | gMC->Gspos("P006", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); |
333 | |
334 | zd1 += conpar[0] * 2.; |
335 | |
336 | tubpar[0] = 20.6/2.; |
337 | tubpar[1] = 21./2.; |
338 | tubpar[2] = 450./2.; |
339 | gMC->Gsvolu("P007", "TUBE", idtmed[5], tubpar, 3); |
340 | gMC->Gspos("P007", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
341 | |
342 | zd1 += tubpar[2] * 2.; |
343 | |
344 | conpar[0] = 13.6/2.; |
345 | conpar[1] = 20.6/2.; |
346 | conpar[2] = 21./2.; |
347 | conpar[3] = 25.4/2.; |
348 | conpar[4] = 25.8/2.; |
349 | gMC->Gsvolu("P008", "CONE", idtmed[5], conpar, 5); |
350 | gMC->Gspos("P008", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); |
351 | |
352 | zd1 += conpar[0] * 2.; |
353 | |
354 | tubpar[0] = 25.4/2.; |
355 | tubpar[1] = 25.8/2.; |
356 | tubpar[2] = 205.8/2.; |
357 | gMC->Gsvolu("P009", "TUBE", idtmed[5], tubpar, 3); |
358 | gMC->Gspos("P009", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
359 | |
360 | zd1 += tubpar[2] * 2.; |
361 | |
362 | tubpar[0] = 50./2.; |
363 | tubpar[1] = 50.4/2.; |
364 | tubpar[2] = 505.4/2.; |
365 | gMC->Gsvolu("P010", "TUBE", idtmed[5], tubpar, 3); |
366 | gMC->Gspos("P010", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
367 | |
368 | zd1 += tubpar[2] * 2.; |
369 | |
370 | tubpar[0] = 50./2.; |
371 | tubpar[1] = 50.4/2.; |
372 | tubpar[2] = 700./2.; |
373 | gMC->Gsvolu("P011", "TUBE", idtmed[5], tubpar, 3); |
374 | gMC->Gspos("P011", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
375 | |
376 | zd1 += tubpar[2] * 2.; |
377 | |
378 | tubpar[0] = 50./2.; |
379 | tubpar[1] = 50.4/2.; |
380 | tubpar[2] = 778.5/2.; |
381 | gMC->Gsvolu("P012", "TUBE", idtmed[5], tubpar, 3); |
382 | gMC->Gspos("P012", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
383 | |
384 | zd1 += tubpar[2] * 2.; |
385 | |
386 | conpar[0] = 14.18/2.; |
387 | conpar[1] = 50./2.; |
388 | conpar[2] = 50.4/2.; |
389 | conpar[3] = 55./2.; |
390 | conpar[4] = 55.4/2.; |
391 | gMC->Gsvolu("P013", "CONE", idtmed[5], conpar, 5); |
392 | gMC->Gspos("P013", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); |
393 | |
394 | zd1 += conpar[0] * 2.; |
395 | |
396 | tubpar[0] = 55./2.; |
397 | tubpar[1] = 55.4/2.; |
398 | tubpar[2] = 730./2.; |
399 | gMC->Gsvolu("P014", "TUBE", idtmed[5], tubpar, 3); |
400 | gMC->Gspos("P014", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
401 | |
402 | zd1 += tubpar[2] * 2.; |
403 | |
404 | conpar[0] = 36.86/2.; |
405 | conpar[1] = 55./2.; |
406 | conpar[2] = 55.4/2.; |
407 | conpar[3] = 68./2.; |
408 | conpar[4] = 68.4/2.; |
409 | gMC->Gsvolu("P015", "CONE", idtmed[5], conpar, 5); |
410 | gMC->Gspos("P015", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); |
411 | |
412 | zd1 += conpar[0] * 2.; |
413 | |
414 | tubpar[0] = 68./2.; |
415 | tubpar[1] = 68.4/2.; |
416 | tubpar[2] = 927.3/2.; |
417 | gMC->Gsvolu("P016", "TUBE", idtmed[5], tubpar, 3); |
418 | gMC->Gspos("P016", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
419 | |
420 | zd1 += tubpar[2] * 2.; |
421 | |
422 | tubpar[0] = 0./2.; |
423 | tubpar[1] = 68.4/2.; |
424 | tubpar[2] = 0.2/2.; |
866ab5a2 |
425 | gMC->Gsvolu("P017", "TUBE", idtmed[8], tubpar, 3); |
68ca986e |
426 | gMC->Gspos("P017", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
427 | |
428 | zd1 += tubpar[2] * 2.; |
429 | |
430 | tubpar[0] = 0./2.; |
431 | tubpar[1] = 5./2.; |
432 | tubpar[2] = 0.2/2.; |
433 | gMC->Gsvolu("Q017", "TUBE", idtmed[10], tubpar, 3); |
434 | |
435 | //-- Position Q017 inside P017 |
436 | gMC->Gspos("Q017", 1, "P017", -7.7, 0., 0., 0, "ONLY"); |
437 | |
438 | tubpar[0] = 0./2.; |
439 | tubpar[1] = 7./2.; |
440 | tubpar[2] = 0.2/2.; |
441 | gMC->Gsvolu("R017", "TUBE", idtmed[10], tubpar, 3); |
442 | |
443 | //-- Position R017 inside P017 |
444 | gMC->Gspos("R017", 1, "P017", 7.7, 0., 0., 0, "ONLY"); |
445 | |
446 | //-- BEAM PIPE BETWEEN END OF CONICAL PIPE AND BEGINNING OF D2 |
447 | |
448 | tubpar[0] = 5./2.; |
449 | tubpar[1] = 5.4/2.; |
450 | tubpar[2] = 678./2.; |
451 | gMC->Gsvolu("P018", "TUBE", idtmed[5], tubpar, 3); |
452 | |
453 | tubpar[0] = 7./2.; |
454 | tubpar[1] = 7.4/2.; |
455 | tubpar[2] = 678./2.; |
456 | gMC->Gsvolu("P019", "TUBE", idtmed[5], tubpar, 3); |
457 | |
458 | // -- ROTATE PIPES |
459 | |
460 | AliMatrix(im1, 90.-0.071, 0., 90., 90., .071, 180.); |
461 | angle = .071*kDegrad; |
462 | gMC->Gspos("P018", 1, "ZDC ", TMath::Sin(angle) * 645. / 2. - 9.7 + |
463 | TMath::Sin(angle) * 945. / 2., 0., tubpar[2] + zd1, im1, "ONLY"); |
464 | AliMatrix(im2, 90.+0.071, 0., 90., 90., .071, 0.); |
465 | gMC->Gspos("P019", 1, "ZDC ", 9.7 - TMath::Sin(angle) * 645. / 2., 0., |
466 | tubpar[2] + zd1, im2, "ONLY"); |
467 | |
468 | // -- END OF BEAM PIPE VOLUME DEFINITION. MAGNET DEFINITION FOLLOWS |
469 | // (LHC OPTICS 6) |
470 | |
0014adbc |
471 | // ---------------------------------------------------------------- |
472 | // Replaced by the muon dipole |
473 | // ---------------------------------------------------------------- |
68ca986e |
474 | // -- COMPENSATOR DIPOLE (MBXW) |
475 | // GAP (VACUUM WITH MAGNETIC FIELD) |
476 | |
5ce39387 |
477 | // tubpar[0] = 0.; |
478 | // tubpar[1] = 4.5; |
479 | // tubpar[2] = 340./2.; |
480 | // gMC->Gsvolu("MBXW", "TUBE", idtmed[11], tubpar, 3); |
481 | // gMC->Gspos("MBXW", 1, "ZDC ", 0., 0., tubpar[2] + 805., 0, "ONLY"); |
68ca986e |
482 | |
483 | // -- YOKE (IRON WITHOUT MAGNETIC FIELD) |
484 | |
5ce39387 |
485 | // tubpar[0] = 4.5; |
486 | // tubpar[1] = 55.; |
487 | // tubpar[2] = 340./2.; |
488 | // gMC->Gsvolu("YMBX", "TUBE", idtmed[5], tubpar, 3); |
489 | // gMC->Gspos("YMBX", 1, "ZDC ", 0., 0., tubpar[2] + 805., 0, "ONLY"); |
68ca986e |
490 | |
0014adbc |
491 | // ---------------------------------------------------------------- |
492 | // Replaced by the muon compesator |
493 | // ---------------------------------------------------------------- |
68ca986e |
494 | // -- COMPENSATOR DIPOLE (MCBWA) |
495 | // GAP (VACUUM WITH MAGNETIC FIELD) |
496 | |
0014adbc |
497 | // tubpar[0] = 0.; |
498 | // tubpar[1] = 4.5; |
499 | // tubpar[2] = 170./2.; |
500 | // gMC->Gsvolu("MCBW", "TUBE", idtmed[11], tubpar, 3); |
501 | // gMC->Gspos("MCBW", 1, "ZDC ", 0., 0., tubpar[2] + 1921.6, 0, "ONLY"); |
68ca986e |
502 | |
503 | // -- YOKE (IRON WITHOUT MAGNETIC FIELD) |
504 | |
0014adbc |
505 | // tubpar[0] = 4.5; |
506 | // tubpar[1] = 55.; |
507 | // tubpar[2] = 170./2.; |
508 | // gMC->Gsvolu("YMCB", "TUBE", idtmed[5], tubpar, 3); |
509 | // gMC->Gspos("YMCB", 1, "ZDC ", 0., 0., tubpar[2] + 1921.6, 0, "ONLY"); |
68ca986e |
510 | |
511 | // -- INNER TRIPLET |
512 | |
513 | zq = 2300.; |
514 | |
515 | // -- DEFINE MQXL AND MQX QUADRUPOLE ELEMENT |
516 | |
517 | // MQXL |
518 | // -- GAP (VACUUM WITH MAGNETIC FIELD) |
519 | |
520 | tubpar[0] = 0.; |
521 | tubpar[1] = 3.5; |
522 | tubpar[2] = 630./2.; |
523 | gMC->Gsvolu("MQXL", "TUBE", idtmed[11], tubpar, 3); |
524 | |
525 | // -- YOKE |
526 | |
527 | tubpar[0] = 3.5; |
528 | tubpar[1] = 22.; |
529 | tubpar[2] = 630./2.; |
530 | gMC->Gsvolu("YMQL", "TUBE", idtmed[5], tubpar, 3); |
531 | |
532 | gMC->Gspos("MQXL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY"); |
533 | gMC->Gspos("YMQL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY"); |
534 | |
535 | gMC->Gspos("MQXL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY"); |
536 | gMC->Gspos("YMQL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY"); |
537 | |
538 | // -- MQX |
539 | // -- GAP (VACUUM WITH MAGNETIC FIELD) |
540 | |
541 | tubpar[0] = 0.; |
542 | tubpar[1] = 3.5; |
543 | tubpar[2] = 550./2.; |
544 | gMC->Gsvolu("MQX ", "TUBE", idtmed[11], tubpar, 3); |
545 | |
546 | // -- YOKE |
547 | |
548 | tubpar[0] = 3.5; |
549 | tubpar[1] = 22.; |
550 | tubpar[2] = 550./2.; |
551 | gMC->Gsvolu("YMQ ", "TUBE", idtmed[5], tubpar, 3); |
552 | |
553 | gMC->Gspos("MQX ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 880., 0, "ONLY"); |
554 | gMC->Gspos("YMQ ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 880., 0, "ONLY"); |
555 | |
556 | gMC->Gspos("MQX ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1530., 0, "ONLY"); |
557 | gMC->Gspos("YMQ ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1530., 0, "ONLY"); |
558 | |
559 | // -- SEPARATOR DIPOLE D1 |
560 | |
561 | zd1 = 5838.3; |
562 | |
563 | // -- GAP (VACUUM WITH MAGNETIC FIELD) |
564 | |
565 | tubpar[0] = 0.; |
566 | tubpar[1] = 7.5/2.; |
567 | tubpar[2] = 945./2.; |
568 | gMC->Gsvolu("D1 ", "TUBE", idtmed[11], tubpar, 3); |
569 | |
570 | // -- YOKE |
571 | |
572 | tubpar[0] = 0.; |
573 | tubpar[1] = 110./2; |
574 | tubpar[2] = 945./2.; |
575 | gMC->Gsvolu("YD1 ", "TUBE", idtmed[5], tubpar, 3); |
576 | |
577 | gMC->Gspos("YD1 ", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); |
578 | gMC->Gspos("D1 ", 1, "YD1 ", 0., 0., 0., 0, "ONLY"); |
579 | |
580 | // -- DIPOLE D2 |
581 | |
582 | zd2 = 12147.6; |
583 | |
584 | // -- GAP (VACUUM WITH MAGNETIC FIELD) |
585 | |
586 | tubpar[0] = 0.; |
587 | tubpar[1] = 7.5/2.; |
588 | tubpar[2] = 945./2.; |
589 | gMC->Gsvolu("D2 ", "TUBE", idtmed[11], tubpar, 3); |
590 | |
591 | // -- YOKE |
592 | |
593 | tubpar[0] = 0.; |
594 | tubpar[1] = 55.; |
595 | tubpar[2] = 945./2.; |
596 | gMC->Gsvolu("YD2 ", "TUBE", idtmed[5], tubpar, 3); |
597 | |
598 | gMC->Gspos("YD2 ", 1, "ZDC ", 0., 0., tubpar[2] + zd2, 0, "ONLY"); |
599 | |
600 | gMC->Gspos("D2 ", 1, "YD2 ", -9.7, 0., 0., 0, "ONLY"); |
601 | gMC->Gspos("D2 ", 2, "YD2 ", 9.7, 0., 0., 0, "ONLY"); |
602 | |
603 | // -- END OF MAGNET DEFINITION |
604 | } |
605 | |
606 | //_____________________________________________________________________________ |
607 | void AliZDCv1::CreateZDC() |
608 | { |
609 | |
866ab5a2 |
610 | Int_t irot1, irot2; |
611 | Float_t DimPb[6], DimVoid[6]; |
5a881c97 |
612 | |
613 | Int_t *idtmed = fIdtmed->GetArray(); |
614 | |
615 | // Parameters for hadronic calorimeters geometry |
616 | // NB -> parameters used ONLY in CreateZDC() |
617 | Float_t fDimZN[3] = {3.52, 3.52, 50.}; // Dimensions of neutron detector |
618 | Float_t fGrvZN[3] = {0.03, 0.03, 50.}; // Grooves for neutron detector |
619 | Float_t fGrvZP[3] = {0.04, 0.04, 75.}; // Grooves for proton detector |
620 | Int_t fDivZN[3] = {11, 11, 0}; // Division for neutron detector |
621 | Int_t fDivZP[3] = {7, 15, 0}; // Division for proton detector |
622 | Int_t fTowZN[2] = {2, 2}; // Tower for neutron detector |
623 | Int_t fTowZP[2] = {4, 1}; // Tower for proton detector |
624 | |
625 | // Parameters for EM calorimeter geometry |
626 | // NB -> parameters used ONLY in CreateZDC() |
627 | Float_t fDimZEMPb = 0.15*(TMath::Sqrt(2.)); // z-dimension of the Pb slice |
628 | Float_t fDimZEMAir = 0.001; // scotch |
629 | Float_t fFibRadZEM = 0.0315; // External fiber radius (including cladding) |
630 | Int_t fDivZEM[3] = {92, 0, 20}; // Divisions for EM detector |
631 | Float_t fDimZEM0 = 2*fDivZEM[2]*(fDimZEMPb+fDimZEMAir+fFibRadZEM*(TMath::Sqrt(2.))); |
632 | Float_t fDimZEM[6] = {fDimZEM0, 3.5, 3.5, 45., 0., 0.}; // Dimensions of EM detector |
633 | Float_t fFibZEM2 = fDimZEM[2]/TMath::Sin(fDimZEM[3]*kDegrad)-fFibRadZEM; |
634 | Float_t fFibZEM[3] = {0., 0.0275, fFibZEM2}; // Fibers for EM calorimeter |
866ab5a2 |
635 | |
68ca986e |
636 | |
637 | //-- Create calorimeters geometry |
638 | |
639 | //--> Neutron calorimeter (ZN) |
640 | |
641 | gMC->Gsvolu("ZNEU", "BOX ", idtmed[1], fDimZN, 3); // Passive material |
642 | gMC->Gsvolu("ZNF1", "TUBE", idtmed[3], fFibZN, 3); // Active material |
643 | gMC->Gsvolu("ZNF2", "TUBE", idtmed[4], fFibZN, 3); |
644 | gMC->Gsvolu("ZNF3", "TUBE", idtmed[4], fFibZN, 3); |
645 | gMC->Gsvolu("ZNF4", "TUBE", idtmed[3], fFibZN, 3); |
646 | gMC->Gsvolu("ZNG1", "BOX ", idtmed[12], fGrvZN, 3); // Empty grooves |
647 | gMC->Gsvolu("ZNG2", "BOX ", idtmed[12], fGrvZN, 3); |
648 | gMC->Gsvolu("ZNG3", "BOX ", idtmed[12], fGrvZN, 3); |
649 | gMC->Gsvolu("ZNG4", "BOX ", idtmed[12], fGrvZN, 3); |
650 | |
651 | // Divide ZNEU in towers (for hits purposes) |
652 | |
653 | gMC->Gsdvn("ZNTX", "ZNEU", fTowZN[0], 1); // x-tower |
654 | gMC->Gsdvn("ZN1 ", "ZNTX", fTowZN[1], 2); // y-tower |
655 | |
656 | //-- Divide ZN1 in minitowers |
657 | // fDivZN[0]= NUMBER OF FIBERS PER TOWER ALONG X-AXIS, |
658 | // fDivZN[1]= NUMBER OF FIBERS PER TOWER ALONG Y-AXIS |
659 | // (4 fibres per minitower) |
660 | |
661 | gMC->Gsdvn("ZNSL", "ZN1 ", fDivZN[1], 2); // Slices |
662 | gMC->Gsdvn("ZNST", "ZNSL", fDivZN[0], 1); // Sticks |
663 | |
664 | // --- Position the empty grooves in the sticks (4 grooves per stick) |
665 | Float_t dx = fDimZN[0] / fDivZN[0] / 4.; |
666 | Float_t dy = fDimZN[1] / fDivZN[1] / 4.; |
667 | |
668 | gMC->Gspos("ZNG1", 1, "ZNST", 0.-dx, 0.+dy, 0., 0, "ONLY"); |
669 | gMC->Gspos("ZNG2", 1, "ZNST", 0.+dx, 0.+dy, 0., 0, "ONLY"); |
670 | gMC->Gspos("ZNG3", 1, "ZNST", 0.-dx, 0.-dy, 0., 0, "ONLY"); |
671 | gMC->Gspos("ZNG4", 1, "ZNST", 0.+dx, 0.-dy, 0., 0, "ONLY"); |
672 | |
673 | // --- Position the fibers in the grooves |
674 | gMC->Gspos("ZNF1", 1, "ZNG1", 0., 0., 0., 0, "ONLY"); |
675 | gMC->Gspos("ZNF2", 1, "ZNG2", 0., 0., 0., 0, "ONLY"); |
676 | gMC->Gspos("ZNF3", 1, "ZNG3", 0., 0., 0., 0, "ONLY"); |
677 | gMC->Gspos("ZNF4", 1, "ZNG4", 0., 0., 0., 0, "ONLY"); |
678 | |
679 | // --- Position the neutron calorimeter in ZDC |
680 | gMC->Gspos("ZNEU", 1, "ZDC ", fPosZN[0], fPosZN[1], fPosZN[2] + fDimZN[2], 0, "ONLY"); |
681 | |
866ab5a2 |
682 | |
683 | //--> Proton calorimeter (ZP) |
68ca986e |
684 | |
685 | gMC->Gsvolu("ZPRO", "BOX ", idtmed[2], fDimZP, 3); // Passive material |
686 | gMC->Gsvolu("ZPF1", "TUBE", idtmed[3], fFibZP, 3); // Active material |
687 | gMC->Gsvolu("ZPF2", "TUBE", idtmed[4], fFibZP, 3); |
688 | gMC->Gsvolu("ZPF3", "TUBE", idtmed[4], fFibZP, 3); |
689 | gMC->Gsvolu("ZPF4", "TUBE", idtmed[3], fFibZP, 3); |
690 | gMC->Gsvolu("ZPG1", "BOX ", idtmed[12], fGrvZP, 3); // Empty grooves |
691 | gMC->Gsvolu("ZPG2", "BOX ", idtmed[12], fGrvZP, 3); |
692 | gMC->Gsvolu("ZPG3", "BOX ", idtmed[12], fGrvZP, 3); |
693 | gMC->Gsvolu("ZPG4", "BOX ", idtmed[12], fGrvZP, 3); |
694 | |
695 | //-- Divide ZPRO in towers(for hits purposes) |
696 | |
697 | gMC->Gsdvn("ZPTX", "ZPRO", fTowZP[0], 1); // x-tower |
698 | gMC->Gsdvn("ZP1 ", "ZPTX", fTowZP[1], 2); // y-tower |
699 | |
700 | |
701 | //-- Divide ZP1 in minitowers |
702 | // fDivZP[0]= NUMBER OF FIBERS ALONG X-AXIS PER MINITOWER, |
703 | // fDivZP[1]= NUMBER OF FIBERS ALONG Y-AXIS PER MINITOWER |
704 | // (4 fiber per minitower) |
705 | |
706 | gMC->Gsdvn("ZPSL", "ZP1 ", fDivZP[1], 2); // Slices |
707 | gMC->Gsdvn("ZPST", "ZPSL", fDivZP[0], 1); // Sticks |
708 | |
709 | // --- Position the empty grooves in the sticks (4 grooves per stick) |
710 | dx = fDimZP[0] / fTowZP[0] / fDivZP[0] / 2.; |
711 | dy = fDimZP[1] / fTowZP[1] / fDivZP[1] / 2.; |
712 | |
713 | gMC->Gspos("ZPG1", 1, "ZPST", 0.-dx, 0.+dy, 0., 0, "ONLY"); |
714 | gMC->Gspos("ZPG2", 1, "ZPST", 0.+dx, 0.+dy, 0., 0, "ONLY"); |
715 | gMC->Gspos("ZPG3", 1, "ZPST", 0.-dx, 0.-dy, 0., 0, "ONLY"); |
716 | gMC->Gspos("ZPG4", 1, "ZPST", 0.+dx, 0.-dy, 0., 0, "ONLY"); |
717 | |
718 | // --- Position the fibers in the grooves |
719 | gMC->Gspos("ZPF1", 1, "ZPG1", 0., 0., 0., 0, "ONLY"); |
720 | gMC->Gspos("ZPF2", 1, "ZPG2", 0., 0., 0., 0, "ONLY"); |
721 | gMC->Gspos("ZPF3", 1, "ZPG3", 0., 0., 0., 0, "ONLY"); |
722 | gMC->Gspos("ZPF4", 1, "ZPG4", 0., 0., 0., 0, "ONLY"); |
723 | |
724 | |
725 | // --- Position the proton calorimeter in ZDC |
726 | gMC->Gspos("ZPRO", 1, "ZDC ", fPosZP[0], fPosZP[1], fPosZP[2] + fDimZP[2], 0, "ONLY"); |
866ab5a2 |
727 | |
728 | |
729 | |
730 | //--> EM calorimeter (ZEM) |
731 | |
732 | gMC->Gsvolu("ZEM ", "PARA", idtmed[10], fDimZEM, 6); |
733 | |
734 | gMC->Matrix(irot1,0.,0.,90.,90.,90.,180.); // Rotation matrix 1 |
735 | gMC->Matrix(irot2,180.,0.,90.,fDimZEM[3]+90.,90.,fDimZEM[3]); // Rotation matrix 2 |
736 | // printf("irot1 = %d, irot2 = %d \n", irot1, irot2); |
737 | |
738 | gMC->Gsvolu("ZEMF", "TUBE", idtmed[3], fFibZEM, 3); // Active material |
739 | |
740 | gMC->Gsdvn("ZETR", "ZEM ", fDivZEM[2], 1); // Tranches |
741 | |
742 | DimPb[0] = fDimZEMPb; // Lead slices |
743 | DimPb[1] = fDimZEM[2]; |
744 | DimPb[2] = fDimZEM[1]; |
745 | DimPb[3] = 90.-fDimZEM[3]; |
746 | DimPb[4] = 0.; |
747 | DimPb[5] = 0.; |
748 | gMC->Gsvolu("ZEL0", "PARA", idtmed[6], DimPb, 6); |
749 | gMC->Gsvolu("ZEL1", "PARA", idtmed[6], DimPb, 6); |
750 | gMC->Gsvolu("ZEL2", "PARA", idtmed[6], DimPb, 6); |
751 | |
752 | // --- Position the lead slices in the tranche |
753 | Float_t zTran = fDimZEM[0]/fDivZEM[2]; |
754 | Float_t zTrPb = -zTran+fDimZEMPb; |
755 | gMC->Gspos("ZEL0", 1, "ZETR", zTrPb, 0., 0., 0, "ONLY"); |
756 | gMC->Gspos("ZEL1", 1, "ZETR", fDimZEMPb, 0., 0., 0, "ONLY"); |
757 | |
758 | // --- Vacuum zone (to be filled with fibres) |
759 | DimVoid[0] = (zTran-2*fDimZEMPb)/2.; |
760 | DimVoid[1] = fDimZEM[2]; |
761 | DimVoid[2] = fDimZEM[1]; |
762 | DimVoid[3] = 90.-fDimZEM[3]; |
763 | DimVoid[4] = 0.; |
764 | DimVoid[5] = 0.; |
765 | gMC->Gsvolu("ZEV0", "PARA", idtmed[10], DimVoid,6); |
766 | gMC->Gsvolu("ZEV1", "PARA", idtmed[10], DimVoid,6); |
767 | |
768 | // --- Divide the vacuum slice into sticks along x axis |
769 | gMC->Gsdvn("ZES0", "ZEV0", fDivZEM[0], 3); |
770 | gMC->Gsdvn("ZES1", "ZEV1", fDivZEM[0], 3); |
771 | |
772 | // --- Positioning the fibers into the sticks |
773 | gMC->Gspos("ZEMF", 1,"ZES0", 0., 0., 0., irot2, "ONLY"); |
774 | gMC->Gspos("ZEMF", 1,"ZES1", 0., 0., 0., irot2, "ONLY"); |
775 | |
776 | // --- Positioning the vacuum slice into the tranche |
777 | Float_t DisplFib = fDimZEM[1]/fDivZEM[0]; |
778 | gMC->Gspos("ZEV0", 1,"ZETR", -DimVoid[0], 0., 0., 0, "ONLY"); |
779 | gMC->Gspos("ZEV1", 1,"ZETR", -DimVoid[0]+zTran, 0., DisplFib, 0, "ONLY"); |
780 | |
781 | // --- Positioning the ZEM into the ZDC - rotation for 90 degrees |
782 | gMC->Gspos("ZEM ", 1,"ZDC ", fPosZEM[0], fPosZEM[1], fPosZEM[2], irot1, "ONLY"); |
783 | |
784 | // --- Adding last slice at the end of the EM calorimeter |
785 | Float_t zLastSlice = fPosZEM[2]+fDimZEMPb+fDimZEM[0]; |
786 | gMC->Gspos("ZEL2", 1,"ZDC ", fPosZEM[0], fPosZEM[1], zLastSlice, irot1, "ONLY"); |
68ca986e |
787 | |
788 | } |
789 | |
790 | //_____________________________________________________________________________ |
791 | void AliZDCv1::DrawModule() |
792 | { |
793 | // |
794 | // Draw a shaded view of the Zero Degree Calorimeter version 1 |
795 | // |
796 | |
797 | // Set everything unseen |
798 | gMC->Gsatt("*", "seen", -1); |
799 | // |
800 | // Set ALIC mother transparent |
801 | gMC->Gsatt("ALIC","SEEN",0); |
802 | // |
803 | // Set the volumes visible |
804 | gMC->Gsatt("ZDC ","SEEN",0); |
805 | gMC->Gsatt("P001","SEEN",1); |
806 | gMC->Gsatt("E001","SEEN",1); |
807 | gMC->Gsatt("E002","SEEN",1); |
808 | gMC->Gsatt("E003","SEEN",1); |
809 | gMC->Gsatt("E004","SEEN",1); |
810 | gMC->Gsatt("C001","SEEN",1); |
811 | gMC->Gsatt("P002","SEEN",1); |
812 | gMC->Gsatt("P003","SEEN",1); |
813 | gMC->Gsatt("P004","SEEN",1); |
814 | gMC->Gsatt("P005","SEEN",1); |
815 | gMC->Gsatt("P006","SEEN",1); |
816 | gMC->Gsatt("P007","SEEN",1); |
817 | gMC->Gsatt("P008","SEEN",1); |
818 | gMC->Gsatt("P009","SEEN",1); |
819 | gMC->Gsatt("P010","SEEN",1); |
820 | gMC->Gsatt("P011","SEEN",1); |
821 | gMC->Gsatt("P012","SEEN",1); |
822 | gMC->Gsatt("P013","SEEN",1); |
823 | gMC->Gsatt("P014","SEEN",1); |
824 | gMC->Gsatt("P015","SEEN",1); |
825 | gMC->Gsatt("P016","SEEN",1); |
826 | gMC->Gsatt("P017","SEEN",1); |
827 | gMC->Gsatt("Q017","SEEN",1); |
828 | gMC->Gsatt("R017","SEEN",1); |
829 | gMC->Gsatt("P018","SEEN",1); |
830 | gMC->Gsatt("P019","SEEN",1); |
5ce39387 |
831 | // gMC->Gsatt("MBXW","SEEN",1); |
832 | // gMC->Gsatt("YMBX","SEEN",1); |
68ca986e |
833 | gMC->Gsatt("MCBW","SEEN",1); |
834 | gMC->Gsatt("YMCB","SEEN",1); |
835 | gMC->Gsatt("MQXL","SEEN",1); |
836 | gMC->Gsatt("YMQL","SEEN",1); |
837 | gMC->Gsatt("MQX ","SEEN",1); |
838 | gMC->Gsatt("YMQ ","SEEN",1); |
839 | gMC->Gsatt("D1 ","SEEN",1); |
840 | gMC->Gsatt("YD1 ","SEEN",1); |
841 | gMC->Gsatt("D2 ","SEEN",1); |
842 | gMC->Gsatt("YD2 ","SEEN",1); |
843 | gMC->Gsatt("ZNEU","SEEN",0); |
844 | gMC->Gsatt("ZNF1","SEEN",0); |
845 | gMC->Gsatt("ZNF2","SEEN",0); |
846 | gMC->Gsatt("ZNF3","SEEN",0); |
847 | gMC->Gsatt("ZNF4","SEEN",0); |
848 | gMC->Gsatt("ZNG1","SEEN",0); |
849 | gMC->Gsatt("ZNG2","SEEN",0); |
850 | gMC->Gsatt("ZNG3","SEEN",0); |
851 | gMC->Gsatt("ZNG4","SEEN",0); |
852 | gMC->Gsatt("ZNTX","SEEN",0); |
853 | gMC->Gsatt("ZN1 ","COLO",2); |
854 | gMC->Gsatt("ZN1 ","SEEN",1); |
855 | gMC->Gsatt("ZNSL","SEEN",0); |
856 | gMC->Gsatt("ZNST","SEEN",0); |
857 | gMC->Gsatt("ZPRO","SEEN",0); |
858 | gMC->Gsatt("ZPF1","SEEN",0); |
859 | gMC->Gsatt("ZPF2","SEEN",0); |
860 | gMC->Gsatt("ZPF3","SEEN",0); |
861 | gMC->Gsatt("ZPF4","SEEN",0); |
862 | gMC->Gsatt("ZPG1","SEEN",0); |
863 | gMC->Gsatt("ZPG2","SEEN",0); |
864 | gMC->Gsatt("ZPG3","SEEN",0); |
865 | gMC->Gsatt("ZPG4","SEEN",0); |
866 | gMC->Gsatt("ZPTX","SEEN",0); |
867 | gMC->Gsatt("ZP1 ","COLO",2); |
868 | gMC->Gsatt("ZP1 ","SEEN",1); |
869 | gMC->Gsatt("ZPSL","SEEN",0); |
870 | gMC->Gsatt("ZPST","SEEN",0); |
866ab5a2 |
871 | gMC->Gsatt("ZEM ","COLO",2); |
872 | gMC->Gsatt("ZEM ","SEEN",1); |
873 | gMC->Gsatt("ZEMF","SEEN",0); |
874 | gMC->Gsatt("ZETR","SEEN",0); |
875 | gMC->Gsatt("ZEL0","SEEN",0); |
876 | gMC->Gsatt("ZEL1","SEEN",0); |
877 | gMC->Gsatt("ZEL2","SEEN",0); |
878 | gMC->Gsatt("ZEV0","SEEN",0); |
879 | gMC->Gsatt("ZEV1","SEEN",0); |
880 | gMC->Gsatt("ZES0","SEEN",0); |
881 | gMC->Gsatt("ZES1","SEEN",0); |
68ca986e |
882 | |
883 | // |
884 | gMC->Gdopt("hide", "on"); |
885 | gMC->Gdopt("shad", "on"); |
886 | gMC->Gsatt("*", "fill", 7); |
887 | gMC->SetClipBox("."); |
888 | gMC->SetClipBox("*", 0, 100, -100, 100, 12000, 16000); |
889 | gMC->DefaultRange(); |
890 | gMC->Gdraw("alic", 40, 30, 0, 488, 220, .07, .07); |
891 | gMC->Gdhead(1111, "Zero Degree Calorimeter Version 1"); |
892 | gMC->Gdman(18, 4, "MAN"); |
893 | } |
894 | |
895 | //_____________________________________________________________________________ |
896 | void AliZDCv1::CreateMaterials() |
897 | { |
898 | // |
899 | // Create Materials for the Zero Degree Calorimeter |
900 | // |
901 | // Origin : E. Scomparin |
902 | |
903 | Int_t *idtmed = fIdtmed->GetArray(); |
904 | |
866ab5a2 |
905 | Float_t dens, ubuf[1], wmat[2], a[2], z[2], epsil=0.001, stmin=0.01; |
5a881c97 |
906 | Float_t deemax = -1, stemax; |
68ca986e |
907 | Float_t fieldm = gAlice->Field()->Max(); |
68ca986e |
908 | Float_t tmaxfd=gAlice->Field()->Max(); |
5a881c97 |
909 | Int_t i, isvolActive, isvol, inofld; |
866ab5a2 |
910 | Int_t isxfld = gAlice->Field()->Integ(); |
68ca986e |
911 | |
912 | // --- Store in UBUF r0 for nuclear radius calculation R=r0*A**1/3 |
913 | |
914 | // --- Tantalum -> ZN passive material |
915 | ubuf[0] = 1.1; |
916 | AliMaterial(1, "TANT", 180.95, 73., 16.65, .4, 11.9, ubuf, 1); |
917 | |
918 | // --- Tungsten |
919 | // ubuf[0] = 1.11; |
920 | // AliMaterial(1, "TUNG", 183.85, 74., 19.3, .35, 10.3, ubuf, 1); |
921 | |
922 | // --- Brass (CuZn) -> ZP passive material |
923 | dens = 8.48; |
924 | a[0] = 63.546; |
925 | a[1] = 65.39; |
926 | z[0] = 29.; |
927 | z[1] = 30.; |
928 | wmat[0] = .63; |
929 | wmat[1] = .37; |
930 | AliMixture(2, "BRASS ", a, z, dens, 2, wmat); |
931 | |
932 | // --- SiO2 |
933 | dens = 2.64; |
934 | a[0] = 28.086; |
935 | a[1] = 15.9994; |
936 | z[0] = 14.; |
937 | z[1] = 8.; |
938 | wmat[0] = 1.; |
939 | wmat[1] = 2.; |
940 | AliMixture(3, "SIO2 ", a, z, dens, -2, wmat); |
866ab5a2 |
941 | |
942 | |
943 | // --- Lead |
944 | ubuf[0] = 1.12; |
945 | AliMaterial(5, "LEAD", 207.19, 82., 11.35, .56, 18.5, ubuf, 1); |
68ca986e |
946 | |
947 | // --- Copper |
948 | // ubuf[0] = 1.1; |
949 | // AliMaterial(7, "COPP", 63.54, 29., 8.96, 1.4, 0., ubuf, 1); |
950 | |
866ab5a2 |
951 | // --- Iron (energy loss taken into account) |
952 | ubuf[0] = 1.1; |
953 | AliMaterial(6, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1); |
68ca986e |
954 | |
866ab5a2 |
955 | // --- Iron (no energy loss) |
68ca986e |
956 | ubuf[0] = 1.1; |
866ab5a2 |
957 | AliMaterial(7, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1); |
68ca986e |
958 | |
959 | // --- Vacuum (no magnetic field) |
960 | AliMaterial(10, "VOID", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0); |
961 | |
962 | // --- Vacuum (with magnetic field) |
963 | AliMaterial(11, "VOIM", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0); |
964 | |
965 | // --- Air (no magnetic field) |
966 | AliMaterial(12, "Air $", 14.61, 7.3, .001205, 30420., 67500., ubuf, 0); |
967 | |
968 | // --- Definition of tracking media: |
969 | |
970 | // --- Tantalum = 1 ; |
971 | // --- Brass = 2 ; |
972 | // --- Fibers (SiO2) = 3 ; |
973 | // --- Fibers (SiO2) = 4 ; |
866ab5a2 |
974 | // --- Lead = 5 ; |
975 | // --- Iron (with energy loss) = 6 ; |
976 | // --- Iron (without energy loss) = 7 ; |
68ca986e |
977 | // --- Vacuum (no field) = 10 |
978 | // --- Vacuum (with field) = 11 |
979 | // --- Air (no field) = 12 |
980 | |
981 | |
982 | // --- Tracking media parameters |
983 | epsil = .01; |
984 | stemax = 1.; |
985 | isvol = 0; |
986 | isvolActive = 1; |
987 | inofld = 0; |
988 | fieldm = 0.; |
989 | |
990 | AliMedium(1, "ZTANT", 1, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
991 | // AliMedium(1, "ZW", 1, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
992 | AliMedium(2, "ZBRASS", 2, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
993 | AliMedium(3, "ZSIO2", 3, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
994 | AliMedium(4, "ZQUAR", 3, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
866ab5a2 |
995 | AliMedium(6, "ZLEAD", 5, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
68ca986e |
996 | // AliMedium(7, "ZCOPP", 7, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
866ab5a2 |
997 | AliMedium(5, "ZIRON", 6, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
998 | AliMedium(8, "ZIRONN", 7, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
68ca986e |
999 | AliMedium(10, "ZVOID", 10, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
1000 | AliMedium(12, "ZAIR", 12, 0, inofld, fieldm, tmaxfd, stemax,deemax, epsil, stmin); |
1001 | |
1002 | fieldm = 45.; |
1003 | AliMedium(11, "ZVOIM", 11, isvol, isxfld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
1004 | |
1005 | // Thresholds for showering in the ZDCs |
1006 | |
1007 | i = 1; |
1008 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); |
1009 | gMC->Gstpar(idtmed[i], "CUTELE", .001); |
1010 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); |
1011 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); |
1012 | i = 2; |
1013 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); |
1014 | gMC->Gstpar(idtmed[i], "CUTELE", .001); |
1015 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); |
1016 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); |
866ab5a2 |
1017 | i = 6; |
1018 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); |
1019 | gMC->Gstpar(idtmed[i], "CUTELE", .001); |
1020 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); |
1021 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); |
68ca986e |
1022 | |
1023 | // Avoid too detailed showering along the beam line |
1024 | |
1025 | i = 5; |
1026 | gMC->Gstpar(idtmed[i], "CUTGAM", .1); |
1027 | gMC->Gstpar(idtmed[i], "CUTELE", .1); |
1028 | gMC->Gstpar(idtmed[i], "CUTNEU", 1.); |
1029 | gMC->Gstpar(idtmed[i], "CUTHAD", 1.); |
1030 | |
1031 | // Avoid interaction in fibers (only energy loss allowed) |
1032 | i = 3; |
1033 | gMC->Gstpar(idtmed[i], "DCAY", 0.); |
1034 | gMC->Gstpar(idtmed[i], "MULS", 0.); |
1035 | gMC->Gstpar(idtmed[i], "PFIS", 0.); |
1036 | gMC->Gstpar(idtmed[i], "MUNU", 0.); |
1037 | gMC->Gstpar(idtmed[i], "LOSS", 1.); |
1038 | gMC->Gstpar(idtmed[i], "PHOT", 0.); |
1039 | gMC->Gstpar(idtmed[i], "COMP", 0.); |
1040 | gMC->Gstpar(idtmed[i], "PAIR", 0.); |
1041 | gMC->Gstpar(idtmed[i], "BREM", 0.); |
1042 | gMC->Gstpar(idtmed[i], "DRAY", 0.); |
1043 | gMC->Gstpar(idtmed[i], "ANNI", 0.); |
1044 | gMC->Gstpar(idtmed[i], "HADR", 0.); |
1045 | i = 4; |
1046 | gMC->Gstpar(idtmed[i], "DCAY", 0.); |
1047 | gMC->Gstpar(idtmed[i], "MULS", 0.); |
1048 | gMC->Gstpar(idtmed[i], "PFIS", 0.); |
1049 | gMC->Gstpar(idtmed[i], "MUNU", 0.); |
1050 | gMC->Gstpar(idtmed[i], "LOSS", 1.); |
1051 | gMC->Gstpar(idtmed[i], "PHOT", 0.); |
1052 | gMC->Gstpar(idtmed[i], "COMP", 0.); |
1053 | gMC->Gstpar(idtmed[i], "PAIR", 0.); |
1054 | gMC->Gstpar(idtmed[i], "BREM", 0.); |
1055 | gMC->Gstpar(idtmed[i], "DRAY", 0.); |
1056 | gMC->Gstpar(idtmed[i], "ANNI", 0.); |
1057 | gMC->Gstpar(idtmed[i], "HADR", 0.); |
866ab5a2 |
1058 | |
1059 | // Avoid interaction in void |
1060 | i = 10; |
1061 | gMC->Gstpar(idtmed[i], "DCAY", 0.); |
1062 | gMC->Gstpar(idtmed[i], "MULS", 0.); |
1063 | gMC->Gstpar(idtmed[i], "PFIS", 0.); |
1064 | gMC->Gstpar(idtmed[i], "MUNU", 0.); |
1065 | gMC->Gstpar(idtmed[i], "LOSS", 0.); |
1066 | gMC->Gstpar(idtmed[i], "PHOT", 0.); |
1067 | gMC->Gstpar(idtmed[i], "COMP", 0.); |
1068 | gMC->Gstpar(idtmed[i], "PAIR", 0.); |
1069 | gMC->Gstpar(idtmed[i], "BREM", 0.); |
1070 | gMC->Gstpar(idtmed[i], "DRAY", 0.); |
1071 | gMC->Gstpar(idtmed[i], "ANNI", 0.); |
1072 | gMC->Gstpar(idtmed[i], "HADR", 0.); |
1073 | |
68ca986e |
1074 | // |
866ab5a2 |
1075 | fMedSensF1 = idtmed[3]; // Sensitive volume: fibres type 1 |
1076 | fMedSensF2 = idtmed[4]; // Sensitive volume: fibres type 2 |
1077 | fMedSensZN = idtmed[1]; // Sensitive volume: ZN passive material |
1078 | fMedSensZP = idtmed[2]; // Sensitive volume: ZP passive material |
1079 | fMedSensZEM = idtmed[6]; // Sensitive volume: ZEM passive material |
1080 | fMedSensGR = idtmed[12]; // Sensitive volume: air into the grooves |
1081 | fMedSensPI = idtmed[5]; // Sensitive volume: beam pipes |
68ca986e |
1082 | } |
1083 | |
1084 | //_____________________________________________________________________________ |
1085 | void AliZDCv1::Init() |
1086 | { |
1087 | InitTables(); |
68ca986e |
1088 | } |
1089 | |
1090 | //_____________________________________________________________________________ |
1091 | void AliZDCv1::InitTables() |
1092 | { |
c0ceba4c |
1093 | Int_t k, j; |
5a881c97 |
1094 | |
866ab5a2 |
1095 | char *lightfName1,*lightfName2,*lightfName3,*lightfName4, |
1096 | *lightfName5,*lightfName6,*lightfName7,*lightfName8; |
68ca986e |
1097 | FILE *fp1, *fp2, *fp3, *fp4, *fp5, *fp6, *fp7, *fp8; |
1098 | |
866ab5a2 |
1099 | lightfName1 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362207s"); |
1100 | if((fp1 = fopen(lightfName1,"r")) == NULL){ |
68ca986e |
1101 | printf("Cannot open file fp1 \n"); |
1102 | return; |
1103 | } |
866ab5a2 |
1104 | lightfName2 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362208s"); |
1105 | if((fp2 = fopen(lightfName2,"r")) == NULL){ |
68ca986e |
1106 | printf("Cannot open file fp2 \n"); |
1107 | return; |
1108 | } |
866ab5a2 |
1109 | lightfName3 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362209s"); |
1110 | if((fp3 = fopen(lightfName3,"r")) == NULL){ |
68ca986e |
1111 | printf("Cannot open file fp3 \n"); |
1112 | return; |
1113 | } |
866ab5a2 |
1114 | lightfName4 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362210s"); |
1115 | if((fp4 = fopen(lightfName4,"r")) == NULL){ |
68ca986e |
1116 | printf("Cannot open file fp4 \n"); |
1117 | return; |
1118 | } |
1119 | // printf(" --- Reading light tables for ZN \n"); |
c0ceba4c |
1120 | for(k=0; k<fNalfan; k++){ |
1121 | for(j=0; j<fNben; j++){ |
68ca986e |
1122 | fscanf(fp1,"%f",&fTablen[0][k][j]); |
1123 | fscanf(fp2,"%f",&fTablen[1][k][j]); |
1124 | fscanf(fp3,"%f",&fTablen[2][k][j]); |
1125 | fscanf(fp4,"%f",&fTablen[3][k][j]); |
1126 | } |
1127 | } |
1128 | fclose(fp1); |
1129 | fclose(fp2); |
1130 | fclose(fp3); |
1131 | fclose(fp4); |
1132 | |
866ab5a2 |
1133 | lightfName5 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552207s"); |
1134 | if((fp5 = fopen(lightfName5,"r")) == NULL){ |
68ca986e |
1135 | printf("Cannot open file fp5 \n"); |
1136 | return; |
1137 | } |
866ab5a2 |
1138 | lightfName6 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552208s"); |
1139 | if((fp6 = fopen(lightfName6,"r")) == NULL){ |
68ca986e |
1140 | printf("Cannot open file fp6 \n"); |
1141 | return; |
1142 | } |
866ab5a2 |
1143 | lightfName7 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552209s"); |
1144 | if((fp7 = fopen(lightfName7,"r")) == NULL){ |
68ca986e |
1145 | printf("Cannot open file fp7 \n"); |
1146 | return; |
1147 | } |
866ab5a2 |
1148 | lightfName8 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552210s"); |
1149 | if((fp8 = fopen(lightfName8,"r")) == NULL){ |
68ca986e |
1150 | printf("Cannot open file fp8 \n"); |
1151 | return; |
1152 | } |
866ab5a2 |
1153 | // printf(" --- Reading light tables for ZP and ZEM \n"); |
c0ceba4c |
1154 | for(k=0; k<fNalfap; k++){ |
1155 | for(j=0; j<fNbep; j++){ |
68ca986e |
1156 | fscanf(fp5,"%f",&fTablep[0][k][j]); |
1157 | fscanf(fp6,"%f",&fTablep[1][k][j]); |
1158 | fscanf(fp7,"%f",&fTablep[2][k][j]); |
1159 | fscanf(fp8,"%f",&fTablep[3][k][j]); |
1160 | } |
1161 | } |
1162 | fclose(fp5); |
1163 | fclose(fp6); |
1164 | fclose(fp7); |
1165 | fclose(fp8); |
1166 | } |
5ce39387 |
1167 | |
1168 | //_____________________________________________________________________________ |
1169 | Int_t AliZDCv1::Digitize(Int_t Det, Int_t Quad, Int_t Light) |
1170 | { |
1171 | // Evaluation of the ADC channel corresponding to the light yield Light |
1172 | |
9d7316ac |
1173 | if(fDebug == 1){ |
1174 | printf("\n Digitize -> Det = %d, Quad = %d, Light = %d\n", Det, Quad, Light); |
1175 | } |
5ce39387 |
1176 | |
5a881c97 |
1177 | // Parameters for conversion of light yield in ADC channels |
1178 | Float_t fPMGain[3][5]; // PM gain |
1179 | Float_t fADCRes; // ADC conversion factor |
1180 | |
5ce39387 |
1181 | Int_t j,i; |
1182 | for(i=0; i<3; i++){ |
1183 | for(j=0; j<5; j++){ |
0c9b76ab |
1184 | fPMGain[i][j] = 100000.; |
5ce39387 |
1185 | } |
1186 | } |
1187 | fADCRes = 0.00000064; // ADC Resolution: 250 fC/ADCch |
1188 | |
0c9b76ab |
1189 | Int_t ADCch = Int_t(Light*fPMGain[Det-1][Quad]*fADCRes); |
5a881c97 |
1190 | |
5ce39387 |
1191 | return ADCch; |
1192 | } |
2ab0c725 |
1193 | |
5ce39387 |
1194 | |
2ab0c725 |
1195 | //_____________________________________________________________________________ |
1196 | void AliZDCv1::SDigits2Digits() |
1197 | { |
1198 | Hits2Digits(gAlice->GetNtrack()); |
1199 | } |
5ce39387 |
1200 | |
2ab0c725 |
1201 | //_____________________________________________________________________________ |
1202 | void AliZDCv1::Hits2Digits(Int_t ntracks) |
1203 | { |
5ce39387 |
1204 | AliZDCDigit *newdigit; |
1205 | AliZDCHit *hit; |
1206 | |
1207 | Int_t PMCZN = 0, PMCZP = 0, PMQZN[4], PMQZP[4], PMZEM = 0; |
1208 | |
cc9c0243 |
1209 | Int_t i; |
1210 | for(i=0; i<4; i++){ |
1211 | PMQZN[i] =0; |
1212 | PMQZP[i] =0; |
5ce39387 |
1213 | } |
1214 | |
cc9c0243 |
1215 | Int_t itrack = 0; |
1216 | for(itrack=0; itrack<ntracks; itrack++){ |
1217 | gAlice->ResetHits(); |
1218 | gAlice->TreeH()->GetEvent(itrack); |
1219 | for(i=0; i<fHits->GetEntries(); i++){ |
1220 | hit = (AliZDCHit*)fHits->At(i); |
1221 | Int_t det = hit->GetVolume(0); |
1222 | Int_t quad = hit->GetVolume(1); |
1223 | Int_t lightQ = Int_t(hit->GetLightPMQ()); |
1224 | Int_t lightC = Int_t(hit->GetLightPMC()); |
1225 | if(fDebug == 1) |
1226 | printf(" \n itrack = %d, fNhits = %d, det = %d, quad = %d," |
1227 | "lightC = %d lightQ = %d\n", itrack, fNhits, det, quad, lightC, lightQ); |
1228 | |
1229 | if(det == 1){ //ZN |
1230 | PMCZN = PMCZN + lightC; |
1231 | PMQZN[quad-1] = PMQZN[quad-1] + lightQ; |
1232 | } |
5ce39387 |
1233 | |
cc9c0243 |
1234 | if(det == 2){ //ZP |
1235 | PMCZP = PMCZP + lightC; |
1236 | PMQZP[quad-1] = PMQZP[quad-1] + lightQ; |
1237 | } |
5ce39387 |
1238 | |
cc9c0243 |
1239 | if(det == 3){ //ZEM |
1240 | PMZEM = PMZEM + lightC; |
1241 | } |
1242 | } // Hits loop |
1243 | |
0c9b76ab |
1244 | } // Tracks loop |
1245 | |
cc9c0243 |
1246 | if(fDebug == 1){ |
1247 | printf("\n PMCZN = %d, PMQZN[0] = %d, PMQZN[1] = %d, PMQZN[2] = %d, PMQZN[3] = %d\n" |
1248 | , PMCZN, PMQZN[0], PMQZN[1], PMQZN[2], PMQZN[3]); |
1249 | printf("\n PMCZP = %d, PMQZP[0] = %d, PMQZP[1] = %d, PMQZP[2] = %d, PMQZP[3] = %d\n" |
1250 | , PMCZP, PMQZP[0], PMQZP[1], PMQZP[2], PMQZP[3]); |
1251 | printf("\n PMZEM = %d\n", PMZEM); |
5ce39387 |
1252 | } |
5ce39387 |
1253 | |
1254 | // ------------------------------------ Hits2Digits |
1255 | // Digits for ZN |
cc9c0243 |
1256 | newdigit = new AliZDCDigit(1, 0, Digitize(1, 0, PMCZN)); |
1257 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); |
1258 | fNdigits++; |
1259 | delete newdigit; |
5ce39387 |
1260 | |
cc9c0243 |
1261 | Int_t j; |
1262 | for(j=0; j<4; j++){ |
1263 | newdigit = new AliZDCDigit(1, j+1, Digitize(1, j+1, PMQZN[j])); |
1264 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); |
1265 | fNdigits++; |
1266 | delete newdigit; |
1267 | } |
1268 | |
1269 | // Digits for ZP |
1270 | newdigit = new AliZDCDigit(2, 0, Digitize(2, 0, PMCZP)); |
1271 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); |
5ce39387 |
1272 | fNdigits++; |
1273 | delete newdigit; |
5ce39387 |
1274 | |
cc9c0243 |
1275 | Int_t k; |
1276 | for(k=0; k<4; k++){ |
1277 | newdigit = new AliZDCDigit(2, k+1, Digitize(2, k+1, PMQZP[k])); |
1278 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); |
1279 | fNdigits++; |
1280 | delete newdigit; |
1281 | } |
5ce39387 |
1282 | |
cc9c0243 |
1283 | // Digits for ZEM |
1284 | newdigit = new AliZDCDigit(3, 0, Digitize(3, 0, PMZEM)); |
1285 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); |
5ce39387 |
1286 | fNdigits++; |
1287 | delete newdigit; |
5ce39387 |
1288 | |
1289 | |
1290 | gAlice->TreeD()->Fill(); |
cc9c0243 |
1291 | gAlice->TreeD()->Write(0,TObject::kOverwrite); |
5ce39387 |
1292 | |
9d7316ac |
1293 | if(fDebug == 1){ |
5ce39387 |
1294 | printf("\n Event Digits -----------------------------------------------------\n"); |
1295 | fDigits->Print(""); |
9d7316ac |
1296 | } |
5ce39387 |
1297 | |
1298 | } |
1299 | //_____________________________________________________________________________ |
2ab0c725 |
1300 | void AliZDCv1::MakeBranch(Option_t *opt, char *file) |
5ce39387 |
1301 | { |
1302 | // |
1303 | // Create a new branch in the current Root Tree |
1304 | // |
1305 | |
1306 | AliDetector::MakeBranch(opt); |
1307 | |
2ab0c725 |
1308 | Char_t branchname[10]; |
5ce39387 |
1309 | sprintf(branchname,"%s",GetName()); |
5cf7bbad |
1310 | const char *cD = strstr(opt,"D"); |
5ce39387 |
1311 | |
7d285fe3 |
1312 | if (gAlice->TreeD() && cD) { |
2ab0c725 |
1313 | |
1314 | // Creation of the digits from hits |
1315 | |
1316 | if(fDigits!=0) fDigits->Clear(); |
1317 | else fDigits = new TClonesArray ("AliZDCDigit",1000); |
1318 | char branchname[10]; |
1319 | sprintf(branchname,"%s",GetName()); |
1320 | gAlice->MakeBranchInTree(gAlice->TreeD(), |
1321 | branchname, &fDigits, fBufferSize, file) ; |
5ce39387 |
1322 | printf("* AliZDCv1::MakeBranch * Making Branch %s for digits\n\n",branchname); |
1323 | } |
1324 | } |
68ca986e |
1325 | //_____________________________________________________________________________ |
1326 | void AliZDCv1::StepManager() |
1327 | { |
1328 | // |
1329 | // Routine called at every step in the Zero Degree Calorimeters |
1330 | // |
1331 | |
c0ceba4c |
1332 | Int_t j; |
5ce39387 |
1333 | Int_t vol[2], ibeta=0, ialfa, ibe, nphe; |
366ff5c2 |
1334 | Float_t x[3], xdet[3], destep, hits[10], m, ekin, um[3], ud[3], be, radius, out; |
68ca986e |
1335 | TLorentzVector s, p; |
1336 | const char *knamed; |
866ab5a2 |
1337 | |
de6bc247 |
1338 | for (j=0;j<10;j++) hits[j]=0; |
866ab5a2 |
1339 | |
68ca986e |
1340 | if((gMC->GetMedium() == fMedSensZN) || (gMC->GetMedium() == fMedSensZP) || |
1341 | (gMC->GetMedium() == fMedSensGR) || (gMC->GetMedium() == fMedSensF1) || |
866ab5a2 |
1342 | (gMC->GetMedium() == fMedSensF2) || (gMC->GetMedium() == fMedSensZEM) || |
1343 | (gMC->GetMedium() == fMedSensPI)){ |
cc9c0243 |
1344 | |
866ab5a2 |
1345 | // If particle interacts with beam pipe -> return |
1346 | if(gMC->GetMedium() == fMedSensPI){ |
1347 | |
1348 | // If option NoShower is set -> StopTrack |
1349 | if(fNoShower==1) gMC->StopTrack(); |
1350 | return; |
1351 | } |
1352 | |
68ca986e |
1353 | //Particle coordinates |
1354 | gMC->TrackPosition(s); |
c0ceba4c |
1355 | for(j=0; j<=2; j++){ |
68ca986e |
1356 | x[j] = s[j]; |
1357 | } |
1358 | hits[0] = x[0]; |
1359 | hits[1] = x[1]; |
1360 | hits[2] = x[2]; |
1361 | |
1362 | // Determine in which ZDC the particle is |
1363 | knamed = gMC->CurrentVolName(); |
1364 | if(!strncmp(knamed,"ZN",2))vol[0]=1; |
1365 | if(!strncmp(knamed,"ZP",2))vol[0]=2; |
866ab5a2 |
1366 | if(!strncmp(knamed,"ZE",2))vol[0]=3; |
68ca986e |
1367 | |
1368 | // Determine in which quadrant the particle is |
1369 | |
1370 | //Quadrant in ZN |
68ca986e |
1371 | if(vol[0]==1){ |
866ab5a2 |
1372 | xdet[0] = x[0]-fPosZN[0]; |
1373 | xdet[1] = x[1]-fPosZN[1]; |
5a881c97 |
1374 | if((xdet[0]<=0.) && (xdet[1]>=0.)) vol[1]=1; |
1375 | if((xdet[0]>0.) && (xdet[1]>0.)) vol[1]=2; |
1376 | if((xdet[0]<0.) && (xdet[1]<0.)) vol[1]=3; |
1377 | if((xdet[0]>0.) && (xdet[1]<0.)) vol[1]=4; |
68ca986e |
1378 | } |
1379 | |
1380 | //Quadrant in ZP |
1381 | if(vol[0]==2){ |
866ab5a2 |
1382 | xdet[0] = x[0]-fPosZP[0]; |
1383 | xdet[1] = x[1]-fPosZP[1]; |
1384 | if(xdet[0]>fDimZP[0])xdet[0]=fDimZP[0]-0.01; |
1385 | if(xdet[0]<-fDimZP[0])xdet[0]=-fDimZP[0]+0.01; |
68ca986e |
1386 | Float_t xqZP = xdet[0]/(fDimZP[0]/2); |
1387 | for(int i=1; i<=4; i++){ |
866ab5a2 |
1388 | if(xqZP>=(i-3) && xqZP<(i-2)){ |
68ca986e |
1389 | vol[1] = i; |
1390 | break; |
5a881c97 |
1391 | } |
1392 | } |
68ca986e |
1393 | } |
866ab5a2 |
1394 | |
1395 | //ZEM has only 1 quadrant |
1396 | if(vol[0] == 3){ |
1397 | vol[1] = 1; |
1398 | xdet[0] = x[0]-fPosZEM[0]; |
1399 | xdet[1] = x[1]-fPosZEM[1]; |
866ab5a2 |
1400 | } |
1401 | |
68ca986e |
1402 | |
1403 | // Store impact point and kinetic energy of the ENTERING particle |
1404 | |
68ca986e |
1405 | // if(Curtrack==Prim){ |
1406 | if(gMC->IsTrackEntering()){ |
1407 | //Particle energy |
1408 | gMC->TrackMomentum(p); |
68ca986e |
1409 | hits[3] = p[3]; |
1410 | |
866ab5a2 |
1411 | // Impact point on ZDC |
68ca986e |
1412 | hits[4] = xdet[0]; |
1413 | hits[5] = xdet[1]; |
866ab5a2 |
1414 | hits[6] = 0; |
68ca986e |
1415 | hits[7] = 0; |
1416 | hits[8] = 0; |
1417 | hits[9] = 0; |
1418 | |
866ab5a2 |
1419 | // Int_t PcID = gMC->TrackPid(); |
1420 | // printf("Pc ID -> %d\n",PcID); |
1421 | AddHit(gAlice->CurrentTrack(), vol, hits); |
1422 | |
1423 | if(fNoShower==1){ |
1424 | gMC->StopTrack(); |
1425 | return; |
1426 | } |
68ca986e |
1427 | } |
1428 | // } |
1429 | |
1430 | // Charged particles -> Energy loss |
1431 | if((destep=gMC->Edep())){ |
1432 | if(gMC->IsTrackStop()){ |
1433 | gMC->TrackMomentum(p); |
1434 | m = gMC->TrackMass(); |
1435 | ekin = p[3]-m; |
1436 | if(ekin<0.) printf("ATTENTION!!!!!!!!!!!!!!! -> ekin = %f <0 (?)",ekin); |
1437 | hits[9] = ekin; |
1438 | hits[7] = 0.; |
1439 | hits[8] = 0.; |
1440 | AddHit(gAlice->CurrentTrack(), vol, hits); |
1441 | } |
1442 | else{ |
1443 | hits[9] = destep; |
1444 | hits[7] = 0.; |
1445 | hits[8] = 0.; |
1446 | AddHit(gAlice->CurrentTrack(), vol, hits); |
1447 | } |
1448 | // printf(" -> Charged particle -> Dep. E = %f eV \n",hits[8]); |
1449 | } |
1450 | // printf(" \n"); |
1451 | } |
1452 | |
1453 | |
1454 | // *** Light production in fibres |
1455 | if((gMC->GetMedium() == fMedSensF1) || (gMC->GetMedium() == fMedSensF2)){ |
68ca986e |
1456 | |
1457 | //Select charged particles |
1458 | if((destep=gMC->Edep())){ |
1459 | // printf(" -> CHARGED particle!!! \n"); |
1460 | |
1461 | // Particle velocity |
1462 | gMC->TrackMomentum(p); |
1463 | Float_t ptot=TMath::Sqrt(p[0]*p[0]+p[1]*p[1]+p[2]*p[2]); |
1464 | Float_t beta = ptot/p[3]; |
68ca986e |
1465 | if(beta<0.67) return; |
866ab5a2 |
1466 | if((beta>=0.67) && (beta<=0.75)) ibeta = 0; |
1467 | if((beta>0.75) && (beta<=0.85)) ibeta = 1; |
1468 | if((beta>0.85) && (beta<=0.95)) ibeta = 2; |
1469 | // if((beta>0.95) && (beta<=1.00)) ibeta = 3; |
1470 | if(beta>0.95) ibeta = 3; |
68ca986e |
1471 | |
1472 | // Angle between particle trajectory and fibre axis |
1473 | // 1 -> Momentum directions |
1474 | um[0] = p[0]/ptot; |
1475 | um[1] = p[1]/ptot; |
1476 | um[2] = p[2]/ptot; |
1477 | gMC->Gmtod(um,ud,2); |
1478 | // 2 -> Angle < limit angle |
1479 | Double_t alfar = TMath::ACos(ud[2]); |
1480 | Double_t alfa = alfar*kRaddeg; |
866ab5a2 |
1481 | if(alfa>=110.) return; |
68ca986e |
1482 | ialfa = Int_t(1.+alfa/2.); |
1483 | |
1484 | // Distance between particle trajectory and fibre axis |
1485 | gMC->TrackPosition(s); |
c0ceba4c |
1486 | for(j=0; j<=2; j++){ |
68ca986e |
1487 | x[j] = s[j]; |
1488 | } |
1489 | gMC->Gmtod(x,xdet,1); |
1490 | if(TMath::Abs(ud[0])>0.00001){ |
1491 | Float_t dcoeff = ud[1]/ud[0]; |
1492 | be = TMath::Abs((xdet[1]-dcoeff*xdet[0])/TMath::Sqrt(dcoeff*dcoeff+1.)); |
1493 | } |
1494 | else{ |
1495 | be = TMath::Abs(ud[0]); |
1496 | } |
1497 | |
1498 | if((vol[0]==1)) radius = fFibZN[1]; |
1499 | if((vol[0]==2)) radius = fFibZP[1]; |
1500 | ibe = Int_t(be*1000.+1); |
1501 | |
1502 | //Looking into the light tables |
1503 | Float_t charge = gMC->TrackCharge(); |
1504 | |
1505 | // (1) ZN |
1506 | if((vol[0]==1)) { |
1507 | if(ibe>fNben) ibe=fNben; |
1508 | out = charge*charge*fTablen[ibeta][ialfa][ibe]; |
5ce39387 |
1509 | nphe = gRandom->Poisson(out); |
68ca986e |
1510 | if(gMC->GetMedium() == fMedSensF1){ |
5ce39387 |
1511 | hits[7] = nphe; //fLightPMQ |
68ca986e |
1512 | hits[8] = 0; |
1513 | hits[9] = 0; |
1514 | AddHit(gAlice->CurrentTrack(), vol, hits); |
1515 | } |
1516 | else{ |
1517 | hits[7] = 0; |
5ce39387 |
1518 | hits[8] = nphe; //fLightPMC |
68ca986e |
1519 | hits[9] = 0; |
1520 | AddHit(gAlice->CurrentTrack(), vol, hits); |
1521 | } |
1522 | } |
1523 | |
1524 | // (2) ZP |
1525 | if((vol[0]==2)) { |
1526 | if(ibe>fNbep) ibe=fNbep; |
1527 | out = charge*charge*fTablep[ibeta][ialfa][ibe]; |
5ce39387 |
1528 | nphe = gRandom->Poisson(out); |
68ca986e |
1529 | if(gMC->GetMedium() == fMedSensF1){ |
5ce39387 |
1530 | hits[7] = nphe; //fLightPMQ |
68ca986e |
1531 | hits[8] = 0; |
1532 | hits[9] = 0; |
1533 | AddHit(gAlice->CurrentTrack(), vol, hits); |
1534 | } |
1535 | else{ |
1536 | hits[7] = 0; |
5ce39387 |
1537 | hits[8] = nphe; //fLightPMC |
68ca986e |
1538 | hits[9] = 0; |
1539 | AddHit(gAlice->CurrentTrack(), vol, hits); |
1540 | } |
1541 | } |
866ab5a2 |
1542 | // (3) ZEM |
1543 | if((vol[0]==3)) { |
1544 | if(ibe>fNbep) ibe=fNbep; |
1545 | out = charge*charge*fTablep[ibeta][ialfa][ibe]; |
5ce39387 |
1546 | nphe = gRandom->Poisson(out); |
0c9b76ab |
1547 | hits[7] = 0; |
1548 | hits[8] = nphe; //fLightPMC |
5ce39387 |
1549 | hits[9] = 0; |
1550 | AddHit(gAlice->CurrentTrack(), vol, hits); |
866ab5a2 |
1551 | } |
68ca986e |
1552 | } |
866ab5a2 |
1553 | |
68ca986e |
1554 | } |
1555 | } |