]>
Commit | Line | Data |
---|---|---|
4663d63d | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
8064008b | 18 | Revision 1.3 2001/06/13 11:11:02 coppedis |
19 | Minor changes | |
20 | ||
6d5d9c06 | 21 | Revision 1.2 2001/06/12 13:45:11 coppedis |
22 | TDI in correct position and minor correction | |
23 | ||
7cc664ae | 24 | Revision 1.1 2001/05/14 09:57:39 coppedis |
25 | A different geometry for the ZDCs | |
26 | ||
4663d63d | 27 | |
28 | */ | |
29 | ||
30 | /////////////////////////////////////////////////////////////////////////////// | |
31 | // // | |
32 | // Zero Degree Calorimeter // | |
33 | // This class contains the basic functions for the ZDC // | |
34 | // Functions specific to one particular geometry are // | |
35 | // contained in the derived classes // | |
36 | // // | |
37 | /////////////////////////////////////////////////////////////////////////////// | |
38 | ||
39 | // --- Standard libraries | |
40 | #include "stdio.h" | |
41 | ||
42 | // --- ROOT system | |
43 | #include <TBRIK.h> | |
44 | #include <TNode.h> | |
45 | #include <TMath.h> | |
46 | #include <TRandom.h> | |
47 | #include <TSystem.h> | |
48 | #include <TTree.h> | |
49 | ||
50 | ||
51 | // --- AliRoot classes | |
52 | #include "AliZDCv2.h" | |
53 | #include "AliZDCHit.h" | |
54 | #include "AliZDCDigit.h" | |
55 | #include "AliRun.h" | |
56 | #include "AliDetector.h" | |
57 | #include "AliMagF.h" | |
58 | #include "AliMC.h" | |
59 | #include "AliCallf77.h" | |
60 | #include "AliConst.h" | |
61 | #include "AliPDG.h" | |
62 | #include "TLorentzVector.h" | |
63 | ||
64 | ||
65 | ClassImp(AliZDCv2) | |
66 | ||
67 | ||
68 | /////////////////////////////////////////////////////////////////////////////// | |
69 | // // | |
70 | // Zero Degree Calorimeter version 2 // | |
71 | // // | |
72 | /////////////////////////////////////////////////////////////////////////////// | |
73 | ||
74 | //_____________________________________________________________________________ | |
75 | AliZDCv2::AliZDCv2() : AliZDC() | |
76 | { | |
77 | // | |
78 | // Default constructor for Zero Degree Calorimeter | |
79 | // | |
80 | ||
81 | fMedSensF1 = 0; | |
82 | fMedSensF2 = 0; | |
83 | fMedSensZN = 0; | |
84 | fMedSensZP = 0; | |
85 | fMedSensZEM = 0; | |
86 | fMedSensGR = 0; | |
87 | // fMedSensPI = 0; | |
88 | // fMedSensTDI = 0; | |
89 | } | |
90 | ||
91 | //_____________________________________________________________________________ | |
92 | AliZDCv2::AliZDCv2(const char *name, const char *title) | |
93 | : AliZDC(name,title) | |
94 | { | |
95 | // | |
96 | // Standard constructor for Zero Degree Calorimeter | |
97 | // | |
98 | // | |
99 | // Check that DIPO, ABSO, DIPO and SHIL is there (otherwise tracking is wrong!!!) | |
100 | ||
101 | AliModule* PIPE=gAlice->GetModule("PIPE"); | |
102 | AliModule* ABSO=gAlice->GetModule("ABSO"); | |
103 | AliModule* DIPO=gAlice->GetModule("DIPO"); | |
104 | AliModule* SHIL=gAlice->GetModule("SHIL"); | |
105 | if((!PIPE) || (!ABSO) || (!DIPO) || (!SHIL)) { | |
106 | Error("Constructor","ZDC needs PIPE, ABSO, DIPO and SHIL!!!\n"); | |
107 | exit(1); | |
108 | } | |
109 | ||
110 | fMedSensF1 = 0; | |
111 | fMedSensF2 = 0; | |
112 | fMedSensZN = 0; | |
113 | fMedSensZP = 0; | |
114 | fMedSensZEM = 0; | |
115 | fMedSensGR = 0; | |
116 | // fMedSensPI = 0; | |
117 | // fMedSensTDI = 0; | |
118 | ||
119 | ||
120 | // Parameters for light tables | |
121 | fNalfan = 90; // Number of Alfa (neutrons) | |
122 | fNalfap = 90; // Number of Alfa (protons) | |
123 | fNben = 18; // Number of beta (neutrons) | |
124 | fNbep = 28; // Number of beta (protons) | |
125 | Int_t ip,jp,kp; | |
126 | for(ip=0; ip<4; ip++){ | |
127 | for(kp=0; kp<fNalfap; kp++){ | |
128 | for(jp=0; jp<fNbep; jp++){ | |
129 | fTablep[ip][kp][jp] = 0; | |
130 | } | |
131 | } | |
132 | } | |
133 | Int_t in,jn,kn; | |
134 | for(in=0; in<4; in++){ | |
135 | for(kn=0; kn<fNalfan; kn++){ | |
136 | for(jn=0; jn<fNben; jn++){ | |
137 | fTablen[in][kn][jn] = 0; | |
138 | } | |
139 | } | |
140 | } | |
141 | ||
142 | // Parameters for hadronic calorimeters geometry | |
143 | fDimZP[0] = 11.2; | |
144 | fDimZP[1] = 6.; | |
145 | fDimZP[2] = 75.; | |
146 | fPosZN[0] = 0.; | |
147 | fPosZN[1] = -1.2; | |
148 | fPosZN[2] = 11650.; | |
149 | fPosZP[0] = -24.; | |
150 | fPosZP[1] = 0.; | |
151 | fPosZP[2] = 11600.; | |
152 | fFibZN[0] = 0.; | |
153 | fFibZN[1] = 0.01825; | |
154 | fFibZN[2] = 50.; | |
155 | fFibZP[0] = 0.; | |
156 | fFibZP[1] = 0.0275; | |
157 | fFibZP[2] = 75.; | |
158 | ||
159 | // Parameters for EM calorimeter geometry | |
160 | fPosZEM[0] = 8.5; | |
161 | fPosZEM[1] = 0.; | |
162 | fPosZEM[2] = -1000.; | |
163 | ||
164 | ||
165 | fDigits = new TClonesArray("AliZDCDigit",1000); | |
166 | } | |
167 | ||
168 | //_____________________________________________________________________________ | |
169 | void AliZDCv2::CreateGeometry() | |
170 | { | |
171 | // | |
172 | // Create the geometry for the Zero Degree Calorimeter version 1 | |
173 | //* Initialize COMMON block ZDC_CGEOM | |
174 | //* | |
175 | ||
176 | CreateBeamLine(); | |
177 | CreateZDC(); | |
178 | } | |
179 | ||
180 | //_____________________________________________________________________________ | |
181 | void AliZDCv2::CreateBeamLine() | |
182 | { | |
183 | ||
184 | Float_t zq, zd1, zd2; | |
185 | Float_t conpar[9], tubpar[3], tubspar[5], boxpar[3]; | |
186 | Int_t im1, im2; | |
187 | ||
188 | Int_t *idtmed = fIdtmed->GetArray(); | |
189 | ||
190 | // -- Mother of the ZDCs (Vacuum PCON) | |
191 | ||
192 | conpar[0] = 0.; | |
193 | conpar[1] = 360.; | |
194 | conpar[2] = 2.; | |
195 | conpar[3] = -1100.; | |
196 | conpar[4] = 0.; | |
197 | conpar[5] = 155.; | |
198 | conpar[6] = 13060.; | |
199 | conpar[7] = 0.; | |
200 | conpar[8] = 155.; | |
201 | gMC->Gsvolu("ZDC ", "PCON", idtmed[11], conpar, 9); | |
202 | gMC->Gspos("ZDC ", 1, "ALIC", 0., 0., 0., 0, "ONLY"); | |
203 | ||
204 | // -- FIRST SECTION OF THE BEAM PIPE (from compensator dipole to | |
205 | // the beginning of D1) | |
206 | ||
207 | zd1 = 2000.; | |
208 | ||
209 | tubpar[0] = 6.3/2.; | |
210 | tubpar[1] = 6.7/2.; | |
211 | tubpar[2] = 3838.3/2.; | |
212 | gMC->Gsvolu("QT01", "TUBE", idtmed[7], tubpar, 3); | |
213 | gMC->Gspos("QT01", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
214 | ||
215 | //-- SECOND SECTION OF THE BEAM PIPE (from the end of D1 to the | |
216 | // beginning of D2) | |
217 | ||
218 | //-- FROM MAGNETIC BEGINNING OF D1 TO MAGNETIC END OF D1 + 13.5 cm | |
219 | //-- Cylindrical pipe (r = 3.47) + conical flare | |
220 | ||
221 | // -> Beginning of D1 | |
222 | zd1 += 2.*tubpar[2]; | |
223 | ||
224 | tubpar[0] = 3.47; | |
225 | tubpar[1] = 3.47+0.2; | |
226 | tubpar[2] = 958.5/2.; | |
227 | gMC->Gsvolu("QT02", "TUBE", idtmed[7], tubpar, 3); | |
228 | gMC->Gspos("QT02", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
229 | ||
230 | zd1 += 2.*tubpar[2]; | |
231 | ||
232 | conpar[0] = 25./2.; | |
233 | conpar[1] = 6.44/2.; | |
234 | conpar[2] = 6.84/2.; | |
235 | conpar[3] = 10./2.; | |
236 | conpar[4] = 10.4/2.; | |
237 | gMC->Gsvolu("QC01", "CONE", idtmed[7], conpar, 5); | |
238 | gMC->Gspos("QC01", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
239 | ||
240 | zd1 += 2.*conpar[0]; | |
241 | ||
242 | tubpar[0] = 10./2.; | |
243 | tubpar[1] = 10.4/2.; | |
244 | tubpar[2] = 50./2.; | |
245 | gMC->Gsvolu("QT03", "TUBE", idtmed[7], tubpar, 3); | |
246 | gMC->Gspos("QT03", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
247 | ||
248 | zd1 += tubpar[2]*2.; | |
249 | ||
250 | tubpar[0] = 10./2.; | |
251 | tubpar[1] = 10.4/2.; | |
252 | tubpar[2] = 10./2.; | |
253 | gMC->Gsvolu("QT04", "TUBE", idtmed[7], tubpar, 3); | |
254 | gMC->Gspos("QT04", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
255 | ||
256 | zd1 += tubpar[2] * 2.; | |
257 | ||
258 | tubpar[0] = 10./2.; | |
259 | tubpar[1] = 10.4/2.; | |
260 | tubpar[2] = 3.16/2.; | |
261 | gMC->Gsvolu("QT05", "TUBE", idtmed[7], tubpar, 3); | |
262 | gMC->Gspos("QT05", 1, "ZDC ", 0., 0., tubpar[0] + zd1, 0, "ONLY"); | |
263 | ||
264 | zd1 += tubpar[2] * 2.; | |
265 | ||
266 | tubpar[0] = 10.0/2.; | |
267 | tubpar[1] = 10.4/2; | |
268 | tubpar[2] = 190./2.; | |
269 | gMC->Gsvolu("QT06", "TUBE", idtmed[7], tubpar, 3); | |
270 | gMC->Gspos("QT06", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
271 | ||
272 | zd1 += tubpar[2] * 2.; | |
273 | ||
274 | conpar[0] = 30./2.; | |
275 | conpar[1] = 10./2.; | |
276 | conpar[2] = 10.4/2.; | |
277 | conpar[3] = 20.6/2.; | |
278 | conpar[4] = 21./2.; | |
279 | gMC->Gsvolu("QC02", "CONE", idtmed[7], conpar, 5); | |
280 | gMC->Gspos("QC02", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
281 | ||
282 | zd1 += conpar[0] * 2.; | |
283 | ||
284 | tubpar[0] = 20.6/2.; | |
285 | tubpar[1] = 21./2.; | |
286 | tubpar[2] = 450./2.; | |
287 | gMC->Gsvolu("QT07", "TUBE", idtmed[7], tubpar, 3); | |
288 | gMC->Gspos("QT07", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
289 | ||
290 | zd1 += tubpar[2] * 2.; | |
291 | ||
292 | conpar[0] = 13.6/2.; | |
293 | conpar[1] = 20.6/2.; | |
294 | conpar[2] = 21./2.; | |
295 | conpar[3] = 25.4/2.; | |
296 | conpar[4] = 25.8/2.; | |
297 | gMC->Gsvolu("QC03", "CONE", idtmed[7], conpar, 5); | |
298 | gMC->Gspos("QC03", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
299 | ||
300 | zd1 += conpar[0] * 2.; | |
301 | ||
302 | tubpar[0] = 25.4/2.; | |
303 | tubpar[1] = 25.8/2.; | |
304 | tubpar[2] = 205.8/2.; | |
305 | gMC->Gsvolu("QT08", "TUBE", idtmed[7], tubpar, 3); | |
306 | gMC->Gspos("QT08", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
307 | ||
308 | zd1 += tubpar[2] * 2.; | |
309 | ||
310 | tubpar[0] = 50./2.; | |
311 | tubpar[1] = 50.4/2.; | |
312 | // QT09 is 10 cm longer to accomodate TDI | |
313 | tubpar[2] = 515.4/2.; | |
314 | gMC->Gsvolu("QT09", "TUBE", idtmed[7], tubpar, 3); | |
315 | gMC->Gspos("QT09", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
316 | ||
317 | // --- Insert TDI (inside ZDC volume) | |
318 | ||
319 | boxpar[0] = 5.6; | |
320 | boxpar[1] = 5.6; | |
321 | boxpar[2] = 400./2.; | |
322 | gMC->Gsvolu("QTD1", "BOX ", idtmed[7], boxpar, 3); | |
323 | gMC->Gspos("QTD1", 1, "ZDC ", 0., 10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY"); | |
324 | gMC->Gspos("QTD1", 2, "ZDC ", 0., -10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY"); | |
325 | ||
326 | boxpar[0] = 0.2/2.; | |
327 | boxpar[1] = 5.6; | |
328 | boxpar[2] = 400./2.; | |
329 | gMC->Gsvolu("QTD2", "BOX ", idtmed[6], boxpar, 3); | |
330 | gMC->Gspos("QTD2", 1, "ZDC ", 5.6+boxpar[0], 0., tubpar[2] + zd1 + 56.3, 0, "ONLY"); | |
331 | ||
6d5d9c06 | 332 | // tubspar[0] = 6.2; // R = 6.2 cm---------------------------------------- |
333 | // tubspar[1] = 6.4; | |
334 | // tubspar[2] = 400./2.; | |
335 | // tubspar[3] = 180.-62.5; | |
336 | // tubspar[4] = 180.+62.5; | |
337 | tubspar[0] = 10.5; // R = 10.5 cm------------------------------------------ | |
338 | tubspar[1] = 10.7; | |
4663d63d | 339 | tubspar[2] = 400./2.; |
6d5d9c06 | 340 | tubspar[3] = 180.-75.5; |
341 | tubspar[4] = 180.+75.5; | |
4663d63d | 342 | gMC->Gsvolu("QTD3", "TUBS", idtmed[6], tubspar, 5); |
343 | gMC->Gspos("QTD3", 1, "ZDC ", -3., 0., tubpar[2] + zd1 + 56.3, 0, "ONLY"); | |
344 | ||
345 | zd1 += tubpar[2] * 2.; | |
346 | ||
347 | tubpar[0] = 50./2.; | |
348 | tubpar[1] = 50.4/2.; | |
349 | // QT10 is 10 cm shorter | |
350 | tubpar[2] = 690./2.; | |
351 | gMC->Gsvolu("QT10", "TUBE", idtmed[7], tubpar, 3); | |
352 | gMC->Gspos("QT10", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
353 | ||
354 | zd1 += tubpar[2] * 2.; | |
355 | ||
356 | tubpar[0] = 50./2.; | |
357 | tubpar[1] = 50.4/2.; | |
358 | tubpar[2] = 778.5/2.; | |
359 | gMC->Gsvolu("QT11", "TUBE", idtmed[7], tubpar, 3); | |
360 | gMC->Gspos("QT11", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
361 | ||
362 | zd1 += tubpar[2] * 2.; | |
363 | ||
364 | conpar[0] = 14.18/2.; | |
365 | conpar[1] = 50./2.; | |
366 | conpar[2] = 50.4/2.; | |
367 | conpar[3] = 55./2.; | |
368 | conpar[4] = 55.4/2.; | |
369 | gMC->Gsvolu("QC04", "CONE", idtmed[7], conpar, 5); | |
370 | gMC->Gspos("QC04", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
371 | ||
372 | zd1 += conpar[0] * 2.; | |
373 | ||
374 | tubpar[0] = 55./2.; | |
375 | tubpar[1] = 55.4/2.; | |
376 | tubpar[2] = 730./2.; | |
377 | gMC->Gsvolu("QT12", "TUBE", idtmed[7], tubpar, 3); | |
378 | gMC->Gspos("QT12", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
379 | ||
380 | zd1 += tubpar[2] * 2.; | |
381 | ||
382 | conpar[0] = 36.86/2.; | |
383 | conpar[1] = 55./2.; | |
384 | conpar[2] = 55.4/2.; | |
385 | conpar[3] = 68./2.; | |
386 | conpar[4] = 68.4/2.; | |
387 | gMC->Gsvolu("QC05", "CONE", idtmed[7], conpar, 5); | |
388 | gMC->Gspos("QC05", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
389 | ||
390 | zd1 += conpar[0] * 2.; | |
391 | ||
392 | tubpar[0] = 68./2.; | |
393 | tubpar[1] = 68.4/2.; | |
394 | tubpar[2] = 927.3/2.; | |
395 | gMC->Gsvolu("QT13", "TUBE", idtmed[7], tubpar, 3); | |
396 | gMC->Gspos("QT13", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
397 | ||
398 | zd1 += tubpar[2] * 2.; | |
399 | ||
400 | tubpar[0] = 0./2.; | |
401 | tubpar[1] = 68.4/2.; | |
402 | tubpar[2] = 0.2/2.; | |
403 | gMC->Gsvolu("QT14", "TUBE", idtmed[8], tubpar, 3); | |
404 | gMC->Gspos("QT14", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
405 | ||
406 | zd1 += tubpar[2] * 2.; | |
407 | ||
408 | tubpar[0] = 0./2.; | |
409 | tubpar[1] = 6.4/2.; | |
410 | tubpar[2] = 0.2/2.; | |
411 | gMC->Gsvolu("QT15", "TUBE", idtmed[11], tubpar, 3); | |
412 | ||
413 | //-- Position QT15 inside QT14 | |
414 | gMC->Gspos("QT15", 1, "QT14", -7.7, 0., 0., 0, "ONLY"); | |
415 | ||
416 | tubpar[0] = 0./2.; | |
417 | tubpar[1] = 6.4/2.; | |
418 | tubpar[2] = 0.2/2.; | |
419 | gMC->Gsvolu("QT16", "TUBE", idtmed[11], tubpar, 3); | |
420 | ||
421 | //-- Position QT16 inside QT14 | |
422 | gMC->Gspos("QT16", 1, "QT14", 7.7, 0., 0., 0, "ONLY"); | |
423 | ||
424 | ||
425 | //-- BEAM PIPE BETWEEN END OF CONICAL PIPE AND BEGINNING OF D2 | |
426 | ||
427 | tubpar[0] = 6.4/2.; | |
428 | tubpar[1] = 6.8/2.; | |
429 | tubpar[2] = 680.8/2.; | |
430 | gMC->Gsvolu("QT17", "TUBE", idtmed[7], tubpar, 3); | |
431 | ||
432 | tubpar[0] = 6.4/2.; | |
433 | tubpar[1] = 6.8/2.; | |
434 | tubpar[2] = 680.8/2.; | |
435 | gMC->Gsvolu("QT18", "TUBE", idtmed[7], tubpar, 3); | |
436 | ||
437 | // -- ROTATE PIPES | |
438 | ||
439 | Float_t angle = 0.143*kDegrad; | |
440 | ||
441 | AliMatrix(im1, 90.-0.143, 0., 90., 90., 0.143, 180.); | |
442 | gMC->Gspos("QT17", 1, "ZDC ", TMath::Sin(angle) * 680.8/ 2. - 9.4, | |
443 | 0., tubpar[2] + zd1, im1, "ONLY"); | |
444 | ||
445 | AliMatrix(im2, 90.+0.143, 0., 90., 90., 0.143, 0.); | |
446 | gMC->Gspos("QT18", 1, "ZDC ", 9.7 - TMath::Sin(angle) * 680.8 / 2., | |
447 | 0., tubpar[2] + zd1, im2, "ONLY"); | |
448 | ||
449 | // -- BEAM PIPE ON THE OTHER SIDE OF I.P. TILL THE EM ZDC | |
450 | ||
451 | Float_t zb = -800.; // End of QBPM (from AliPIPEv0.cxx) | |
452 | tubpar[0] = 8.0/2.; | |
453 | tubpar[1] = 8.2/2.; | |
7cc664ae | 454 | tubpar[2] = (1050+zb)/2.; // From the end of QBPM to z=1050. |
4663d63d | 455 | gMC->Gsvolu("QT19", "TUBE", idtmed[7], tubpar, 3); |
456 | gMC->Gspos("QT19", 1, "ZDC ", 0., 0., zb - tubpar[2], 0, "ONLY"); | |
457 | ||
458 | ||
459 | // -- END OF BEAM PIPE VOLUME DEFINITION. | |
460 | // ---------------------------------------------------------------- | |
461 | ||
462 | // -- MAGNET DEFINITION -> LHC OPTICS 6.2 (preliminary version) | |
463 | ||
464 | // ---------------------------------------------------------------- | |
465 | // Replaced by the muon dipole | |
466 | // ---------------------------------------------------------------- | |
467 | // -- COMPENSATOR DIPOLE (MBXW) | |
468 | // GAP (VACUUM WITH MAGNETIC FIELD) | |
469 | ||
470 | // tubpar[0] = 0.; | |
471 | // tubpar[1] = 4.5; | |
472 | // tubpar[2] = 340./2.; | |
473 | // gMC->Gsvolu("MBXW", "TUBE", idtmed[11], tubpar, 3); | |
474 | // gMC->Gspos("MBXW", 1, "ZDC ", 0., 0., tubpar[2] + 805., 0, "ONLY"); | |
475 | ||
476 | // -- YOKE (IRON WITHOUT MAGNETIC FIELD) | |
477 | ||
478 | // tubpar[0] = 4.5; | |
479 | // tubpar[1] = 55.; | |
480 | // tubpar[2] = 340./2.; | |
481 | // gMC->Gsvolu("YMBX", "TUBE", idtmed[7], tubpar, 3); | |
482 | // gMC->Gspos("YMBX", 1, "ZDC ", 0., 0., tubpar[2] + 805., 0, "ONLY"); | |
483 | ||
484 | // ---------------------------------------------------------------- | |
485 | // Replaced by the second dipole | |
486 | // ---------------------------------------------------------------- | |
487 | // -- COMPENSATOR DIPOLE (MCBWA) | |
488 | // GAP (VACUUM WITH MAGNETIC FIELD) | |
489 | ||
490 | // tubpar[0] = 0.; | |
491 | // tubpar[1] = 4.5; | |
492 | // tubpar[2] = 170./2.; | |
493 | // gMC->Gsvolu("MCBW", "TUBE", idtmed[11], tubpar, 3); | |
494 | // gMC->Gspos("MCBW", 1, "ZDC ", 0., 0., tubpar[2] + 1921.6, 0, "ONLY"); | |
495 | ||
496 | // -- YOKE (IRON WITHOUT MAGNETIC FIELD) | |
497 | ||
498 | // tubpar[0] = 4.5; | |
499 | // tubpar[1] = 55.; | |
500 | // tubpar[2] = 170./2.; | |
501 | // gMC->Gsvolu("YMCB", "TUBE", idtmed[7], tubpar, 3); | |
502 | // gMC->Gspos("YMCB", 1, "ZDC ", 0., 0., tubpar[2] + 1921.6, 0, "ONLY"); | |
503 | ||
504 | // -- INNER TRIPLET | |
505 | ||
506 | zq = 2296.5; | |
507 | ||
508 | // -- DEFINE MQXL AND MQX QUADRUPOLE ELEMENT | |
509 | ||
510 | // MQXL | |
511 | // -- GAP (VACUUM WITH MAGNETIC FIELD) | |
512 | ||
513 | tubpar[0] = 0.; | |
514 | tubpar[1] = 3.5; | |
515 | tubpar[2] = 637./2.; | |
516 | gMC->Gsvolu("MQXL", "TUBE", idtmed[11], tubpar, 3); | |
517 | ||
518 | // -- YOKE | |
519 | ||
520 | tubpar[0] = 3.5; | |
521 | tubpar[1] = 22.; | |
522 | tubpar[2] = 637./2.; | |
523 | gMC->Gsvolu("YMQL", "TUBE", idtmed[7], tubpar, 3); | |
524 | ||
525 | gMC->Gspos("MQXL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY"); | |
526 | gMC->Gspos("YMQL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY"); | |
527 | ||
528 | gMC->Gspos("MQXL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY"); | |
529 | gMC->Gspos("YMQL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY"); | |
530 | ||
531 | // -- MQX | |
532 | // -- GAP (VACUUM WITH MAGNETIC FIELD) | |
533 | ||
534 | tubpar[0] = 0.; | |
535 | tubpar[1] = 3.5; | |
536 | tubpar[2] = 550./2.; | |
537 | gMC->Gsvolu("MQX ", "TUBE", idtmed[11], tubpar, 3); | |
538 | ||
539 | // -- YOKE | |
540 | ||
541 | tubpar[0] = 3.5; | |
542 | tubpar[1] = 22.; | |
543 | tubpar[2] = 550./2.; | |
544 | gMC->Gsvolu("YMQ ", "TUBE", idtmed[7], tubpar, 3); | |
545 | ||
546 | gMC->Gspos("MQX ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 883.5, 0, "ONLY"); | |
547 | gMC->Gspos("YMQ ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 883.5, 0, "ONLY"); | |
548 | ||
549 | gMC->Gspos("MQX ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1533.5, 0, "ONLY"); | |
550 | gMC->Gspos("YMQ ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1533.5, 0, "ONLY"); | |
551 | ||
552 | // -- SEPARATOR DIPOLE D1 | |
553 | ||
554 | zd1 = 5838.3; | |
555 | ||
556 | // -- GAP (VACUUM WITH MAGNETIC FIELD) | |
557 | ||
558 | tubpar[0] = 0.; | |
559 | tubpar[1] = 6.94/2.; | |
560 | tubpar[2] = 945./2.; | |
561 | gMC->Gsvolu("MD1 ", "TUBE", idtmed[11], tubpar, 3); | |
562 | ||
563 | // -- Insert horizontal Cu plates inside D1 | |
564 | // -- (to simulate the vacuum chamber) | |
565 | ||
566 | boxpar[0] = TMath::Sqrt(tubpar[1]*tubpar[1]-(2.98+0.2)*(2.98+0.2)); | |
567 | boxpar[1] = 0.2/2.; | |
568 | boxpar[2] =945./2.; | |
569 | gMC->Gsvolu("MD1V", "BOX ", idtmed[6], boxpar, 3); | |
570 | gMC->Gspos("MD1V", 1, "MD1 ", 0., 2.98+boxpar[1], 0., 0, "ONLY"); | |
571 | gMC->Gspos("MD1V", 2, "MD1 ", 0., -2.98-boxpar[1], 0., 0, "ONLY"); | |
572 | ||
573 | // -- YOKE | |
574 | ||
575 | tubpar[0] = 0.; | |
576 | tubpar[1] = 110./2; | |
577 | tubpar[2] = 945./2.; | |
578 | gMC->Gsvolu("YD1 ", "TUBE", idtmed[7], tubpar, 3); | |
579 | ||
580 | gMC->Gspos("YD1 ", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
581 | gMC->Gspos("MD1 ", 1, "YD1 ", 0., 0., 0., 0, "ONLY"); | |
582 | ||
583 | // -- DIPOLE D2 | |
584 | ||
585 | zd2 = 12147.6; | |
586 | ||
587 | // -- GAP (VACUUM WITH MAGNETIC FIELD) | |
588 | ||
589 | tubpar[0] = 0.; | |
590 | tubpar[1] = 7.5/2.; | |
591 | tubpar[2] = 945./2.; | |
592 | gMC->Gsvolu("MD2 ", "TUBE", idtmed[11], tubpar, 3); | |
593 | ||
594 | // -- YOKE | |
595 | ||
596 | tubpar[0] = 0.; | |
597 | tubpar[1] = 55.; | |
598 | tubpar[2] = 945./2.; | |
599 | gMC->Gsvolu("YD2 ", "TUBE", idtmed[7], tubpar, 3); | |
600 | ||
601 | gMC->Gspos("YD2 ", 1, "ZDC ", 0., 0., tubpar[2] + zd2, 0, "ONLY"); | |
602 | ||
603 | gMC->Gspos("MD2 ", 1, "YD2 ", -9.4, 0., 0., 0, "ONLY"); | |
604 | gMC->Gspos("MD2 ", 2, "YD2 ", 9.4, 0., 0., 0, "ONLY"); | |
605 | ||
606 | // -- END OF MAGNET DEFINITION | |
607 | } | |
608 | ||
609 | //_____________________________________________________________________________ | |
610 | void AliZDCv2::CreateZDC() | |
611 | { | |
612 | ||
613 | Float_t DimPb[6], DimVoid[6]; | |
614 | ||
615 | Int_t *idtmed = fIdtmed->GetArray(); | |
616 | ||
617 | // Parameters for hadronic calorimeters geometry | |
618 | // NB -> parameters used ONLY in CreateZDC() | |
619 | Float_t fDimZN[3] = {3.52, 3.52, 50.}; // Dimensions of neutron detector | |
620 | Float_t fGrvZN[3] = {0.03, 0.03, 50.}; // Grooves for neutron detector | |
621 | Float_t fGrvZP[3] = {0.04, 0.04, 75.}; // Grooves for proton detector | |
622 | Int_t fDivZN[3] = {11, 11, 0}; // Division for neutron detector | |
623 | Int_t fDivZP[3] = {7, 15, 0}; // Division for proton detector | |
624 | Int_t fTowZN[2] = {2, 2}; // Tower for neutron detector | |
625 | Int_t fTowZP[2] = {4, 1}; // Tower for proton detector | |
626 | ||
627 | // Parameters for EM calorimeter geometry | |
628 | // NB -> parameters used ONLY in CreateZDC() | |
629 | Float_t fDimZEMPb = 0.15*(TMath::Sqrt(2.)); // z-dimension of the Pb slice | |
630 | Float_t fDimZEMAir = 0.001; // scotch | |
631 | Float_t fFibRadZEM = 0.0315; // External fiber radius (including cladding) | |
632 | Int_t fDivZEM[3] = {92, 0, 20}; // Divisions for EM detector | |
633 | Float_t fDimZEM0 = 2*fDivZEM[2]*(fDimZEMPb+fDimZEMAir+fFibRadZEM*(TMath::Sqrt(2.))); | |
634 | Float_t fDimZEM[6] = {fDimZEM0, 3.5, 3.5, 45., 0., 0.}; // Dimensions of EM detector | |
635 | Float_t fFibZEM2 = fDimZEM[2]/TMath::Sin(fDimZEM[3]*kDegrad)-fFibRadZEM; | |
636 | Float_t fFibZEM[3] = {0., 0.0275, fFibZEM2}; // Fibers for EM calorimeter | |
637 | ||
638 | ||
639 | //-- Create calorimeters geometry | |
640 | ||
641 | // ------------------------------------------------------------------------------- | |
642 | //--> Neutron calorimeter (ZN) | |
643 | ||
644 | gMC->Gsvolu("ZNEU", "BOX ", idtmed[1], fDimZN, 3); // Passive material | |
645 | gMC->Gsvolu("ZNF1", "TUBE", idtmed[3], fFibZN, 3); // Active material | |
646 | gMC->Gsvolu("ZNF2", "TUBE", idtmed[4], fFibZN, 3); | |
647 | gMC->Gsvolu("ZNF3", "TUBE", idtmed[4], fFibZN, 3); | |
648 | gMC->Gsvolu("ZNF4", "TUBE", idtmed[3], fFibZN, 3); | |
649 | gMC->Gsvolu("ZNG1", "BOX ", idtmed[12], fGrvZN, 3); // Empty grooves | |
650 | gMC->Gsvolu("ZNG2", "BOX ", idtmed[12], fGrvZN, 3); | |
651 | gMC->Gsvolu("ZNG3", "BOX ", idtmed[12], fGrvZN, 3); | |
652 | gMC->Gsvolu("ZNG4", "BOX ", idtmed[12], fGrvZN, 3); | |
653 | ||
654 | // Divide ZNEU in towers (for hits purposes) | |
655 | ||
656 | gMC->Gsdvn("ZNTX", "ZNEU", fTowZN[0], 1); // x-tower | |
657 | gMC->Gsdvn("ZN1 ", "ZNTX", fTowZN[1], 2); // y-tower | |
658 | ||
659 | //-- Divide ZN1 in minitowers | |
660 | // fDivZN[0]= NUMBER OF FIBERS PER TOWER ALONG X-AXIS, | |
661 | // fDivZN[1]= NUMBER OF FIBERS PER TOWER ALONG Y-AXIS | |
662 | // (4 fibres per minitower) | |
663 | ||
664 | gMC->Gsdvn("ZNSL", "ZN1 ", fDivZN[1], 2); // Slices | |
665 | gMC->Gsdvn("ZNST", "ZNSL", fDivZN[0], 1); // Sticks | |
666 | ||
667 | // --- Position the empty grooves in the sticks (4 grooves per stick) | |
668 | Float_t dx = fDimZN[0] / fDivZN[0] / 4.; | |
669 | Float_t dy = fDimZN[1] / fDivZN[1] / 4.; | |
670 | ||
671 | gMC->Gspos("ZNG1", 1, "ZNST", 0.-dx, 0.+dy, 0., 0, "ONLY"); | |
672 | gMC->Gspos("ZNG2", 1, "ZNST", 0.+dx, 0.+dy, 0., 0, "ONLY"); | |
673 | gMC->Gspos("ZNG3", 1, "ZNST", 0.-dx, 0.-dy, 0., 0, "ONLY"); | |
674 | gMC->Gspos("ZNG4", 1, "ZNST", 0.+dx, 0.-dy, 0., 0, "ONLY"); | |
675 | ||
676 | // --- Position the fibers in the grooves | |
677 | gMC->Gspos("ZNF1", 1, "ZNG1", 0., 0., 0., 0, "ONLY"); | |
678 | gMC->Gspos("ZNF2", 1, "ZNG2", 0., 0., 0., 0, "ONLY"); | |
679 | gMC->Gspos("ZNF3", 1, "ZNG3", 0., 0., 0., 0, "ONLY"); | |
680 | gMC->Gspos("ZNF4", 1, "ZNG4", 0., 0., 0., 0, "ONLY"); | |
681 | ||
682 | // --- Position the neutron calorimeter in ZDC | |
683 | gMC->Gspos("ZNEU", 1, "ZDC ", fPosZN[0], fPosZN[1], fPosZN[2] + fDimZN[2], 0, "ONLY"); | |
684 | ||
685 | ||
686 | // ------------------------------------------------------------------------------- | |
687 | //--> Proton calorimeter (ZP) | |
688 | ||
689 | gMC->Gsvolu("ZPRO", "BOX ", idtmed[2], fDimZP, 3); // Passive material | |
690 | gMC->Gsvolu("ZPF1", "TUBE", idtmed[3], fFibZP, 3); // Active material | |
691 | gMC->Gsvolu("ZPF2", "TUBE", idtmed[4], fFibZP, 3); | |
692 | gMC->Gsvolu("ZPF3", "TUBE", idtmed[4], fFibZP, 3); | |
693 | gMC->Gsvolu("ZPF4", "TUBE", idtmed[3], fFibZP, 3); | |
694 | gMC->Gsvolu("ZPG1", "BOX ", idtmed[12], fGrvZP, 3); // Empty grooves | |
695 | gMC->Gsvolu("ZPG2", "BOX ", idtmed[12], fGrvZP, 3); | |
696 | gMC->Gsvolu("ZPG3", "BOX ", idtmed[12], fGrvZP, 3); | |
697 | gMC->Gsvolu("ZPG4", "BOX ", idtmed[12], fGrvZP, 3); | |
698 | ||
699 | //-- Divide ZPRO in towers(for hits purposes) | |
700 | ||
701 | gMC->Gsdvn("ZPTX", "ZPRO", fTowZP[0], 1); // x-tower | |
702 | gMC->Gsdvn("ZP1 ", "ZPTX", fTowZP[1], 2); // y-tower | |
703 | ||
704 | ||
705 | //-- Divide ZP1 in minitowers | |
706 | // fDivZP[0]= NUMBER OF FIBERS ALONG X-AXIS PER MINITOWER, | |
707 | // fDivZP[1]= NUMBER OF FIBERS ALONG Y-AXIS PER MINITOWER | |
708 | // (4 fiber per minitower) | |
709 | ||
710 | gMC->Gsdvn("ZPSL", "ZP1 ", fDivZP[1], 2); // Slices | |
711 | gMC->Gsdvn("ZPST", "ZPSL", fDivZP[0], 1); // Sticks | |
712 | ||
713 | // --- Position the empty grooves in the sticks (4 grooves per stick) | |
714 | dx = fDimZP[0] / fTowZP[0] / fDivZP[0] / 2.; | |
715 | dy = fDimZP[1] / fTowZP[1] / fDivZP[1] / 2.; | |
716 | ||
717 | gMC->Gspos("ZPG1", 1, "ZPST", 0.-dx, 0.+dy, 0., 0, "ONLY"); | |
718 | gMC->Gspos("ZPG2", 1, "ZPST", 0.+dx, 0.+dy, 0., 0, "ONLY"); | |
719 | gMC->Gspos("ZPG3", 1, "ZPST", 0.-dx, 0.-dy, 0., 0, "ONLY"); | |
720 | gMC->Gspos("ZPG4", 1, "ZPST", 0.+dx, 0.-dy, 0., 0, "ONLY"); | |
721 | ||
722 | // --- Position the fibers in the grooves | |
723 | gMC->Gspos("ZPF1", 1, "ZPG1", 0., 0., 0., 0, "ONLY"); | |
724 | gMC->Gspos("ZPF2", 1, "ZPG2", 0., 0., 0., 0, "ONLY"); | |
725 | gMC->Gspos("ZPF3", 1, "ZPG3", 0., 0., 0., 0, "ONLY"); | |
726 | gMC->Gspos("ZPF4", 1, "ZPG4", 0., 0., 0., 0, "ONLY"); | |
727 | ||
728 | ||
729 | // --- Position the proton calorimeter in ZDC | |
730 | gMC->Gspos("ZPRO", 1, "ZDC ", fPosZP[0], fPosZP[1], fPosZP[2] + fDimZP[2], 0, "ONLY"); | |
731 | ||
732 | ||
733 | // ------------------------------------------------------------------------------- | |
734 | // -> EM calorimeter (ZEM) | |
735 | ||
736 | gMC->Gsvolu("ZEM ", "PARA", idtmed[10], fDimZEM, 6); | |
737 | ||
738 | Int_t irot1, irot2; | |
739 | ||
740 | gMC->Matrix(irot1,180.,0.,90.,90.,90.,0.); // Rotation matrix 1 | |
741 | gMC->Matrix(irot2,180.,0.,90.,fDimZEM[3]+90.,90.,fDimZEM[3]);// Rotation matrix 2 | |
742 | // printf("irot1 = %d, irot2 = %d \n", irot1, irot2); | |
743 | ||
744 | gMC->Gsvolu("ZEMF", "TUBE", idtmed[3], fFibZEM, 3); // Active material | |
745 | ||
746 | gMC->Gsdvn("ZETR", "ZEM ", fDivZEM[2], 1); // Tranches | |
747 | ||
748 | DimPb[0] = fDimZEMPb; // Lead slices | |
749 | DimPb[1] = fDimZEM[2]; | |
750 | DimPb[2] = fDimZEM[1]; | |
751 | DimPb[3] = 90.-fDimZEM[3]; | |
752 | DimPb[4] = 0.; | |
753 | DimPb[5] = 0.; | |
754 | gMC->Gsvolu("ZEL0", "PARA", idtmed[5], DimPb, 6); | |
755 | gMC->Gsvolu("ZEL1", "PARA", idtmed[5], DimPb, 6); | |
756 | // gMC->Gsvolu("ZEL2", "PARA", idtmed[5], DimPb, 6); | |
757 | ||
758 | // --- Position the lead slices in the tranche | |
759 | Float_t zTran = fDimZEM[0]/fDivZEM[2]; | |
760 | Float_t zTrPb = -zTran+fDimZEMPb; | |
761 | gMC->Gspos("ZEL0", 1, "ZETR", zTrPb, 0., 0., 0, "ONLY"); | |
762 | gMC->Gspos("ZEL1", 1, "ZETR", fDimZEMPb, 0., 0., 0, "ONLY"); | |
763 | ||
764 | // --- Vacuum zone (to be filled with fibres) | |
765 | DimVoid[0] = (zTran-2*fDimZEMPb)/2.; | |
766 | DimVoid[1] = fDimZEM[2]; | |
767 | DimVoid[2] = fDimZEM[1]; | |
768 | DimVoid[3] = 90.-fDimZEM[3]; | |
769 | DimVoid[4] = 0.; | |
770 | DimVoid[5] = 0.; | |
771 | gMC->Gsvolu("ZEV0", "PARA", idtmed[10], DimVoid,6); | |
772 | gMC->Gsvolu("ZEV1", "PARA", idtmed[10], DimVoid,6); | |
773 | ||
774 | // --- Divide the vacuum slice into sticks along x axis | |
775 | gMC->Gsdvn("ZES0", "ZEV0", fDivZEM[0], 3); | |
776 | gMC->Gsdvn("ZES1", "ZEV1", fDivZEM[0], 3); | |
777 | ||
778 | // --- Positioning the fibers into the sticks | |
779 | gMC->Gspos("ZEMF", 1,"ZES0", 0., 0., 0., irot2, "ONLY"); | |
780 | gMC->Gspos("ZEMF", 1,"ZES1", 0., 0., 0., irot2, "ONLY"); | |
781 | ||
782 | // --- Positioning the vacuum slice into the tranche | |
783 | Float_t DisplFib = fDimZEM[1]/fDivZEM[0]; | |
784 | gMC->Gspos("ZEV0", 1,"ZETR", -DimVoid[0], 0., 0., 0, "ONLY"); | |
785 | gMC->Gspos("ZEV1", 1,"ZETR", -DimVoid[0]+zTran, 0., DisplFib, 0, "ONLY"); | |
786 | ||
787 | // --- Positioning the ZEM into the ZDC - rotation for 90 degrees | |
788 | gMC->Gspos("ZEM ", 1,"ZDC ", fPosZEM[0], fPosZEM[1], fPosZEM[2]+fDimZEM[0], irot1, "ONLY"); | |
789 | ||
790 | // --- Adding last slice at the end of the EM calorimeter | |
791 | // Float_t zLastSlice = fPosZEM[2]+fDimZEMPb+fDimZEM[0]; | |
792 | // gMC->Gspos("ZEL2", 1,"ZDC ", fPosZEM[0], fPosZEM[1], zLastSlice, irot1, "ONLY"); | |
793 | ||
794 | } | |
795 | ||
796 | //_____________________________________________________________________________ | |
797 | void AliZDCv2::DrawModule() | |
798 | { | |
799 | // | |
800 | // Draw a shaded view of the Zero Degree Calorimeter version 1 | |
801 | // | |
802 | ||
803 | // Set everything unseen | |
804 | gMC->Gsatt("*", "seen", -1); | |
805 | // | |
806 | // Set ALIC mother transparent | |
807 | gMC->Gsatt("ALIC","SEEN",0); | |
808 | // | |
809 | // Set the volumes visible | |
810 | gMC->Gsatt("ZDC ","SEEN",0); | |
811 | gMC->Gsatt("QT01","SEEN",1); | |
812 | gMC->Gsatt("QT02","SEEN",1); | |
813 | gMC->Gsatt("QT03","SEEN",1); | |
814 | gMC->Gsatt("QT04","SEEN",1); | |
815 | gMC->Gsatt("QT05","SEEN",1); | |
816 | gMC->Gsatt("QT06","SEEN",1); | |
817 | gMC->Gsatt("QT07","SEEN",1); | |
818 | gMC->Gsatt("QT08","SEEN",1); | |
819 | gMC->Gsatt("QT09","SEEN",1); | |
820 | gMC->Gsatt("QT10","SEEN",1); | |
821 | gMC->Gsatt("QT11","SEEN",1); | |
822 | gMC->Gsatt("QT12","SEEN",1); | |
823 | gMC->Gsatt("QT13","SEEN",1); | |
824 | gMC->Gsatt("QT14","SEEN",1); | |
825 | gMC->Gsatt("QT15","SEEN",1); | |
826 | gMC->Gsatt("QT16","SEEN",1); | |
827 | gMC->Gsatt("QT17","SEEN",1); | |
828 | gMC->Gsatt("QT18","SEEN",1); | |
829 | gMC->Gsatt("QC01","SEEN",1); | |
830 | gMC->Gsatt("QC02","SEEN",1); | |
831 | gMC->Gsatt("QC03","SEEN",1); | |
832 | gMC->Gsatt("QC04","SEEN",1); | |
833 | gMC->Gsatt("QC05","SEEN",1); | |
834 | gMC->Gsatt("QTD1","SEEN",1); | |
835 | gMC->Gsatt("QTD2","SEEN",1); | |
836 | gMC->Gsatt("QTD3","SEEN",1); | |
837 | gMC->Gsatt("MQXL","SEEN",1); | |
838 | gMC->Gsatt("YMQL","SEEN",1); | |
839 | gMC->Gsatt("MQX ","SEEN",1); | |
840 | gMC->Gsatt("YMQ ","SEEN",1); | |
841 | gMC->Gsatt("ZQYX","SEEN",1); | |
842 | gMC->Gsatt("MD1 ","SEEN",1); | |
843 | gMC->Gsatt("MD1V","SEEN",1); | |
844 | gMC->Gsatt("YD1 ","SEEN",1); | |
845 | gMC->Gsatt("MD2 ","SEEN",1); | |
846 | gMC->Gsatt("YD2 ","SEEN",1); | |
847 | gMC->Gsatt("ZNEU","SEEN",0); | |
848 | gMC->Gsatt("ZNF1","SEEN",0); | |
849 | gMC->Gsatt("ZNF2","SEEN",0); | |
850 | gMC->Gsatt("ZNF3","SEEN",0); | |
851 | gMC->Gsatt("ZNF4","SEEN",0); | |
852 | gMC->Gsatt("ZNG1","SEEN",0); | |
853 | gMC->Gsatt("ZNG2","SEEN",0); | |
854 | gMC->Gsatt("ZNG3","SEEN",0); | |
855 | gMC->Gsatt("ZNG4","SEEN",0); | |
856 | gMC->Gsatt("ZNTX","SEEN",0); | |
857 | gMC->Gsatt("ZN1 ","COLO",4); | |
858 | gMC->Gsatt("ZN1 ","SEEN",1); | |
859 | gMC->Gsatt("ZNSL","SEEN",0); | |
860 | gMC->Gsatt("ZNST","SEEN",0); | |
861 | gMC->Gsatt("ZPRO","SEEN",0); | |
862 | gMC->Gsatt("ZPF1","SEEN",0); | |
863 | gMC->Gsatt("ZPF2","SEEN",0); | |
864 | gMC->Gsatt("ZPF3","SEEN",0); | |
865 | gMC->Gsatt("ZPF4","SEEN",0); | |
866 | gMC->Gsatt("ZPG1","SEEN",0); | |
867 | gMC->Gsatt("ZPG2","SEEN",0); | |
868 | gMC->Gsatt("ZPG3","SEEN",0); | |
869 | gMC->Gsatt("ZPG4","SEEN",0); | |
870 | gMC->Gsatt("ZPTX","SEEN",0); | |
871 | gMC->Gsatt("ZP1 ","COLO",6); | |
872 | gMC->Gsatt("ZP1 ","SEEN",1); | |
873 | gMC->Gsatt("ZPSL","SEEN",0); | |
874 | gMC->Gsatt("ZPST","SEEN",0); | |
875 | gMC->Gsatt("ZEM ","COLO",7); | |
876 | gMC->Gsatt("ZEM ","SEEN",1); | |
877 | gMC->Gsatt("ZEMF","SEEN",0); | |
878 | gMC->Gsatt("ZETR","SEEN",0); | |
879 | gMC->Gsatt("ZEL0","SEEN",0); | |
880 | gMC->Gsatt("ZEL1","SEEN",0); | |
881 | gMC->Gsatt("ZEL2","SEEN",0); | |
882 | gMC->Gsatt("ZEV0","SEEN",0); | |
883 | gMC->Gsatt("ZEV1","SEEN",0); | |
884 | gMC->Gsatt("ZES0","SEEN",0); | |
885 | gMC->Gsatt("ZES1","SEEN",0); | |
886 | ||
887 | // | |
888 | gMC->Gdopt("hide", "on"); | |
889 | gMC->Gdopt("shad", "on"); | |
890 | gMC->Gsatt("*", "fill", 7); | |
891 | gMC->SetClipBox("."); | |
892 | gMC->SetClipBox("*", 0, 100, -100, 100, 12000, 16000); | |
893 | gMC->DefaultRange(); | |
894 | gMC->Gdraw("alic", 40, 30, 0, 488, 220, .07, .07); | |
895 | gMC->Gdhead(1111, "Zero Degree Calorimeter Version 1"); | |
896 | gMC->Gdman(18, 4, "MAN"); | |
897 | } | |
898 | ||
899 | //_____________________________________________________________________________ | |
900 | void AliZDCv2::CreateMaterials() | |
901 | { | |
902 | // | |
903 | // Create Materials for the Zero Degree Calorimeter | |
904 | // | |
905 | ||
906 | Int_t *idtmed = fIdtmed->GetArray(); | |
907 | ||
908 | Float_t dens, ubuf[1], wmat[2], a[2], z[2], deemax = -1; | |
909 | Int_t i; | |
910 | ||
911 | // --- Store in UBUF r0 for nuclear radius calculation R=r0*A**1/3 | |
912 | ||
913 | // --- Tantalum -> ZN passive material | |
914 | ubuf[0] = 1.1; | |
915 | AliMaterial(1, "TANT", 180.95, 73., 16.65, .4, 11.9, ubuf, 1); | |
916 | ||
917 | // --- Tungsten | |
918 | // ubuf[0] = 1.11; | |
919 | // AliMaterial(1, "TUNG", 183.85, 74., 19.3, .35, 10.3, ubuf, 1); | |
920 | ||
921 | // --- Brass (CuZn) -> ZP passive material | |
922 | dens = 8.48; | |
923 | a[0] = 63.546; | |
924 | a[1] = 65.39; | |
925 | z[0] = 29.; | |
926 | z[1] = 30.; | |
927 | wmat[0] = .63; | |
928 | wmat[1] = .37; | |
929 | AliMixture(2, "BRASS ", a, z, dens, 2, wmat); | |
930 | ||
931 | // --- SiO2 | |
932 | dens = 2.64; | |
933 | a[0] = 28.086; | |
934 | a[1] = 15.9994; | |
935 | z[0] = 14.; | |
936 | z[1] = 8.; | |
937 | wmat[0] = 1.; | |
938 | wmat[1] = 2.; | |
939 | AliMixture(3, "SIO2 ", a, z, dens, -2, wmat); | |
940 | ||
941 | // --- Lead | |
942 | ubuf[0] = 1.12; | |
943 | AliMaterial(5, "LEAD", 207.19, 82., 11.35, .56, 18.5, ubuf, 1); | |
944 | ||
945 | // --- Copper | |
946 | ubuf[0] = 1.10; | |
947 | AliMaterial(6, "COPP", 63.54, 29., 8.96, 1.4, 0., ubuf, 1); | |
948 | ||
949 | // --- Iron (energy loss taken into account) | |
950 | ubuf[0] = 1.1; | |
951 | AliMaterial(7, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1); | |
952 | ||
953 | // --- Iron (no energy loss) | |
954 | ubuf[0] = 1.1; | |
955 | AliMaterial(8, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1); | |
956 | ||
957 | // --- Vacuum (no magnetic field) | |
958 | AliMaterial(10, "VOID", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0); | |
959 | ||
960 | // --- Vacuum (with magnetic field) | |
961 | AliMaterial(11, "VOIM", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0); | |
962 | ||
963 | // --- Air (no magnetic field) | |
964 | AliMaterial(12, "Air $", 14.61, 7.3, .001205, 30420., 67500., ubuf, 0); | |
965 | ||
966 | // --- Definition of tracking media: | |
967 | ||
968 | // --- Tantalum = 1 ; | |
969 | // --- Brass = 2 ; | |
970 | // --- Fibers (SiO2) = 3 ; | |
971 | // --- Fibers (SiO2) = 4 ; | |
972 | // --- Lead = 5 ; | |
973 | // --- Copper = 6 ; | |
974 | // --- Iron (with energy loss) = 7 ; | |
975 | // --- Iron (without energy loss) = 8 ; | |
976 | // --- Vacuum (no field) = 10 | |
977 | // --- Vacuum (with field) = 11 | |
978 | // --- Air (no field) = 12 | |
979 | ||
980 | ||
981 | // --- Tracking media parameters | |
982 | Float_t epsil = .01, stmin=0.01, stemax = 1.; | |
7cc664ae | 983 | // Int_t isxfld = gAlice->Field()->Integ(); |
4663d63d | 984 | Float_t fieldm = 0., tmaxfd = 0.; |
985 | Int_t ifield = 0, isvolActive = 1, isvol = 0, inofld = 0; | |
986 | ||
987 | AliMedium(1, "ZTANT", 1, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
988 | // AliMedium(1, "ZW", 1, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
989 | AliMedium(2, "ZBRASS",2, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
990 | AliMedium(3, "ZSIO2", 3, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
991 | AliMedium(4, "ZQUAR", 3, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
992 | AliMedium(5, "ZLEAD", 5, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
993 | // AliMedium(6, "ZCOPP", 6, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
994 | // AliMedium(7, "ZIRON", 7, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
995 | AliMedium(6, "ZCOPP", 6, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
996 | AliMedium(7, "ZIRON", 7, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
997 | AliMedium(8, "ZIRONN",8, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
998 | AliMedium(10,"ZVOID",10, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
999 | AliMedium(12,"ZAIR", 12, 0, inofld, fieldm, tmaxfd, stemax,deemax, epsil, stmin); | |
1000 | ||
1001 | ifield =2; | |
1002 | fieldm = 45.; | |
7cc664ae | 1003 | AliMedium(11, "ZVOIM", 11, isvol, ifield, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
4663d63d | 1004 | |
1005 | // Thresholds for showering in the ZDCs | |
1006 | i = 1; //tantalum | |
1007 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); | |
1008 | gMC->Gstpar(idtmed[i], "CUTELE", .001); | |
1009 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); | |
1010 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); | |
1011 | i = 2; //brass | |
1012 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); | |
1013 | gMC->Gstpar(idtmed[i], "CUTELE", .001); | |
1014 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); | |
1015 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); | |
1016 | i = 5; //lead | |
1017 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); | |
1018 | gMC->Gstpar(idtmed[i], "CUTELE", .001); | |
1019 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); | |
1020 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); | |
1021 | ||
1022 | // Avoid too detailed showering in TDI | |
1023 | i = 6; //copper | |
1024 | gMC->Gstpar(idtmed[i], "CUTGAM", .1); | |
1025 | gMC->Gstpar(idtmed[i], "CUTELE", .1); | |
1026 | gMC->Gstpar(idtmed[i], "CUTNEU", 1.); | |
1027 | gMC->Gstpar(idtmed[i], "CUTHAD", 1.); | |
1028 | ||
1029 | // Avoid too detailed showering along the beam line | |
1030 | i = 7; //iron with energy loss (ZIRON) | |
1031 | gMC->Gstpar(idtmed[i], "CUTGAM", .1); | |
1032 | gMC->Gstpar(idtmed[i], "CUTELE", .1); | |
1033 | gMC->Gstpar(idtmed[i], "CUTNEU", 1.); | |
1034 | gMC->Gstpar(idtmed[i], "CUTHAD", 1.); | |
1035 | ||
1036 | // Avoid too detailed showering along the beam line | |
1037 | i = 8; //iron with energy loss (ZIRONN) | |
1038 | gMC->Gstpar(idtmed[i], "CUTGAM", .1); | |
1039 | gMC->Gstpar(idtmed[i], "CUTELE", .1); | |
1040 | gMC->Gstpar(idtmed[i], "CUTNEU", 1.); | |
1041 | gMC->Gstpar(idtmed[i], "CUTHAD", 1.); | |
1042 | ||
1043 | // Avoid interaction in fibers (only energy loss allowed) | |
1044 | i = 3; //fibers (ZSI02) | |
1045 | gMC->Gstpar(idtmed[i], "DCAY", 0.); | |
1046 | gMC->Gstpar(idtmed[i], "MULS", 0.); | |
1047 | gMC->Gstpar(idtmed[i], "PFIS", 0.); | |
1048 | gMC->Gstpar(idtmed[i], "MUNU", 0.); | |
1049 | gMC->Gstpar(idtmed[i], "LOSS", 1.); | |
1050 | gMC->Gstpar(idtmed[i], "PHOT", 0.); | |
1051 | gMC->Gstpar(idtmed[i], "COMP", 0.); | |
1052 | gMC->Gstpar(idtmed[i], "PAIR", 0.); | |
1053 | gMC->Gstpar(idtmed[i], "BREM", 0.); | |
1054 | gMC->Gstpar(idtmed[i], "DRAY", 0.); | |
1055 | gMC->Gstpar(idtmed[i], "ANNI", 0.); | |
1056 | gMC->Gstpar(idtmed[i], "HADR", 0.); | |
1057 | i = 4; //fibers (ZQUAR) | |
1058 | gMC->Gstpar(idtmed[i], "DCAY", 0.); | |
1059 | gMC->Gstpar(idtmed[i], "MULS", 0.); | |
1060 | gMC->Gstpar(idtmed[i], "PFIS", 0.); | |
1061 | gMC->Gstpar(idtmed[i], "MUNU", 0.); | |
1062 | gMC->Gstpar(idtmed[i], "LOSS", 1.); | |
1063 | gMC->Gstpar(idtmed[i], "PHOT", 0.); | |
1064 | gMC->Gstpar(idtmed[i], "COMP", 0.); | |
1065 | gMC->Gstpar(idtmed[i], "PAIR", 0.); | |
1066 | gMC->Gstpar(idtmed[i], "BREM", 0.); | |
1067 | gMC->Gstpar(idtmed[i], "DRAY", 0.); | |
1068 | gMC->Gstpar(idtmed[i], "ANNI", 0.); | |
1069 | gMC->Gstpar(idtmed[i], "HADR", 0.); | |
1070 | ||
1071 | // Avoid interaction in void | |
1072 | i = 11; //void with field | |
1073 | gMC->Gstpar(idtmed[i], "DCAY", 0.); | |
1074 | gMC->Gstpar(idtmed[i], "MULS", 0.); | |
1075 | gMC->Gstpar(idtmed[i], "PFIS", 0.); | |
1076 | gMC->Gstpar(idtmed[i], "MUNU", 0.); | |
1077 | gMC->Gstpar(idtmed[i], "LOSS", 0.); | |
1078 | gMC->Gstpar(idtmed[i], "PHOT", 0.); | |
1079 | gMC->Gstpar(idtmed[i], "COMP", 0.); | |
1080 | gMC->Gstpar(idtmed[i], "PAIR", 0.); | |
1081 | gMC->Gstpar(idtmed[i], "BREM", 0.); | |
1082 | gMC->Gstpar(idtmed[i], "DRAY", 0.); | |
1083 | gMC->Gstpar(idtmed[i], "ANNI", 0.); | |
1084 | gMC->Gstpar(idtmed[i], "HADR", 0.); | |
1085 | ||
1086 | // | |
1087 | fMedSensZN = idtmed[1]; // Sensitive volume: ZN passive material | |
1088 | fMedSensZP = idtmed[2]; // Sensitive volume: ZP passive material | |
1089 | fMedSensF1 = idtmed[3]; // Sensitive volume: fibres type 1 | |
1090 | fMedSensF2 = idtmed[4]; // Sensitive volume: fibres type 2 | |
1091 | fMedSensZEM = idtmed[5]; // Sensitive volume: ZEM passive material | |
1092 | // fMedSensTDI = idtmed[6]; // Sensitive volume: TDI Cu shield | |
1093 | // fMedSensPI = idtmed[7]; // Sensitive volume: beam pipes | |
1094 | fMedSensGR = idtmed[12]; // Sensitive volume: air into the grooves | |
1095 | } | |
1096 | ||
1097 | //_____________________________________________________________________________ | |
1098 | void AliZDCv2::Init() | |
1099 | { | |
1100 | InitTables(); | |
1101 | } | |
1102 | ||
1103 | //_____________________________________________________________________________ | |
1104 | void AliZDCv2::InitTables() | |
1105 | { | |
1106 | Int_t k, j; | |
1107 | ||
1108 | char *lightfName1,*lightfName2,*lightfName3,*lightfName4, | |
1109 | *lightfName5,*lightfName6,*lightfName7,*lightfName8; | |
1110 | FILE *fp1, *fp2, *fp3, *fp4, *fp5, *fp6, *fp7, *fp8; | |
1111 | ||
1112 | // --- Reading light tables for ZN | |
1113 | lightfName1 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362207s"); | |
1114 | if((fp1 = fopen(lightfName1,"r")) == NULL){ | |
1115 | printf("Cannot open file fp1 \n"); | |
1116 | return; | |
1117 | } | |
1118 | lightfName2 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362208s"); | |
1119 | if((fp2 = fopen(lightfName2,"r")) == NULL){ | |
1120 | printf("Cannot open file fp2 \n"); | |
1121 | return; | |
1122 | } | |
1123 | lightfName3 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362209s"); | |
1124 | if((fp3 = fopen(lightfName3,"r")) == NULL){ | |
1125 | printf("Cannot open file fp3 \n"); | |
1126 | return; | |
1127 | } | |
1128 | lightfName4 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362210s"); | |
1129 | if((fp4 = fopen(lightfName4,"r")) == NULL){ | |
1130 | printf("Cannot open file fp4 \n"); | |
1131 | return; | |
1132 | } | |
1133 | ||
1134 | for(k=0; k<fNalfan; k++){ | |
1135 | for(j=0; j<fNben; j++){ | |
1136 | fscanf(fp1,"%f",&fTablen[0][k][j]); | |
1137 | fscanf(fp2,"%f",&fTablen[1][k][j]); | |
1138 | fscanf(fp3,"%f",&fTablen[2][k][j]); | |
1139 | fscanf(fp4,"%f",&fTablen[3][k][j]); | |
1140 | } | |
1141 | } | |
1142 | fclose(fp1); | |
1143 | fclose(fp2); | |
1144 | fclose(fp3); | |
1145 | fclose(fp4); | |
1146 | ||
1147 | // --- Reading light tables for ZP and ZEM | |
1148 | lightfName5 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552207s"); | |
1149 | if((fp5 = fopen(lightfName5,"r")) == NULL){ | |
1150 | printf("Cannot open file fp5 \n"); | |
1151 | return; | |
1152 | } | |
1153 | lightfName6 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552208s"); | |
1154 | if((fp6 = fopen(lightfName6,"r")) == NULL){ | |
1155 | printf("Cannot open file fp6 \n"); | |
1156 | return; | |
1157 | } | |
1158 | lightfName7 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552209s"); | |
1159 | if((fp7 = fopen(lightfName7,"r")) == NULL){ | |
1160 | printf("Cannot open file fp7 \n"); | |
1161 | return; | |
1162 | } | |
1163 | lightfName8 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552210s"); | |
1164 | if((fp8 = fopen(lightfName8,"r")) == NULL){ | |
1165 | printf("Cannot open file fp8 \n"); | |
1166 | return; | |
1167 | } | |
1168 | ||
1169 | for(k=0; k<fNalfap; k++){ | |
1170 | for(j=0; j<fNbep; j++){ | |
1171 | fscanf(fp5,"%f",&fTablep[0][k][j]); | |
1172 | fscanf(fp6,"%f",&fTablep[1][k][j]); | |
1173 | fscanf(fp7,"%f",&fTablep[2][k][j]); | |
1174 | fscanf(fp8,"%f",&fTablep[3][k][j]); | |
1175 | } | |
1176 | } | |
1177 | fclose(fp5); | |
1178 | fclose(fp6); | |
1179 | fclose(fp7); | |
1180 | fclose(fp8); | |
1181 | } | |
1182 | ||
1183 | //_____________________________________________________________________________ | |
1184 | Int_t AliZDCv2::Digitize(Int_t Det, Int_t Quad, Int_t Light) | |
1185 | { | |
1186 | // Evaluation of the ADC channel corresponding to the light yield Light | |
1187 | ||
1188 | if(fDebug == 1){ | |
1189 | printf("\n Digitize -> Det = %d, Quad = %d, Light = %d\n", Det, Quad, Light); | |
1190 | } | |
1191 | ||
1192 | // Parameters for conversion of light yield in ADC channels | |
1193 | Float_t fPMGain[3][5]; // PM gain | |
1194 | Float_t fADCRes; // ADC conversion factor | |
1195 | ||
1196 | Int_t j,i; | |
1197 | for(i=0; i<3; i++){ | |
1198 | for(j=0; j<5; j++){ | |
1199 | fPMGain[i][j] = 100000.; | |
1200 | } | |
1201 | } | |
1202 | fADCRes = 0.00000064; // ADC Resolution: 250 fC/ADCch | |
1203 | ||
1204 | Int_t ADCch = Int_t(Light*fPMGain[Det-1][Quad]*fADCRes); | |
1205 | ||
1206 | return ADCch; | |
1207 | } | |
1208 | ||
1209 | ||
1210 | //_____________________________________________________________________________ | |
1211 | void AliZDCv2::SDigits2Digits() | |
1212 | { | |
1213 | Hits2Digits(gAlice->GetNtrack()); | |
1214 | } | |
1215 | ||
1216 | //_____________________________________________________________________________ | |
1217 | void AliZDCv2::Hits2Digits(Int_t ntracks) | |
1218 | { | |
1219 | AliZDCDigit *newdigit; | |
1220 | AliZDCHit *hit; | |
1221 | ||
1222 | Int_t PMCZN = 0, PMCZP = 0, PMQZN[4], PMQZP[4], PMZEM = 0; | |
1223 | ||
1224 | Int_t i; | |
1225 | for(i=0; i<4; i++){ | |
1226 | PMQZN[i] =0; | |
1227 | PMQZP[i] =0; | |
1228 | } | |
1229 | ||
1230 | Int_t itrack = 0; | |
1231 | for(itrack=0; itrack<ntracks; itrack++){ | |
1232 | gAlice->ResetHits(); | |
1233 | gAlice->TreeH()->GetEvent(itrack); | |
1234 | for(i=0; i<fHits->GetEntries(); i++){ | |
1235 | hit = (AliZDCHit*)fHits->At(i); | |
1236 | Int_t det = hit->GetVolume(0); | |
1237 | Int_t quad = hit->GetVolume(1); | |
1238 | Int_t lightQ = Int_t(hit->GetLightPMQ()); | |
1239 | Int_t lightC = Int_t(hit->GetLightPMC()); | |
1240 | if(fDebug == 1) | |
1241 | printf(" \n itrack = %d, fNhits = %d, det = %d, quad = %d," | |
1242 | "lightC = %d lightQ = %d\n", itrack, fNhits, det, quad, lightC, lightQ); | |
1243 | ||
1244 | if(det == 1){ //ZN | |
1245 | PMCZN = PMCZN + lightC; | |
1246 | PMQZN[quad-1] = PMQZN[quad-1] + lightQ; | |
1247 | } | |
1248 | ||
1249 | if(det == 2){ //ZP | |
1250 | PMCZP = PMCZP + lightC; | |
1251 | PMQZP[quad-1] = PMQZP[quad-1] + lightQ; | |
1252 | } | |
1253 | ||
1254 | if(det == 3){ //ZEM | |
1255 | PMZEM = PMZEM + lightC; | |
1256 | } | |
1257 | } // Hits loop | |
1258 | ||
1259 | } // Tracks loop | |
1260 | ||
1261 | if(fDebug == 1){ | |
1262 | printf("\n PMCZN = %d, PMQZN[0] = %d, PMQZN[1] = %d, PMQZN[2] = %d, PMQZN[3] = %d\n" | |
1263 | , PMCZN, PMQZN[0], PMQZN[1], PMQZN[2], PMQZN[3]); | |
1264 | printf("\n PMCZP = %d, PMQZP[0] = %d, PMQZP[1] = %d, PMQZP[2] = %d, PMQZP[3] = %d\n" | |
1265 | , PMCZP, PMQZP[0], PMQZP[1], PMQZP[2], PMQZP[3]); | |
1266 | printf("\n PMZEM = %d\n", PMZEM); | |
1267 | } | |
1268 | ||
1269 | // ------------------------------------ Hits2Digits | |
1270 | // Digits for ZN | |
1271 | newdigit = new AliZDCDigit(1, 0, Digitize(1, 0, PMCZN)); | |
1272 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
1273 | fNdigits++; | |
1274 | delete newdigit; | |
1275 | ||
1276 | Int_t j; | |
1277 | for(j=0; j<4; j++){ | |
1278 | newdigit = new AliZDCDigit(1, j+1, Digitize(1, j+1, PMQZN[j])); | |
1279 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
1280 | fNdigits++; | |
1281 | delete newdigit; | |
1282 | } | |
1283 | ||
1284 | // Digits for ZP | |
1285 | newdigit = new AliZDCDigit(2, 0, Digitize(2, 0, PMCZP)); | |
1286 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
1287 | fNdigits++; | |
1288 | delete newdigit; | |
1289 | ||
1290 | Int_t k; | |
1291 | for(k=0; k<4; k++){ | |
1292 | newdigit = new AliZDCDigit(2, k+1, Digitize(2, k+1, PMQZP[k])); | |
1293 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
1294 | fNdigits++; | |
1295 | delete newdigit; | |
1296 | } | |
1297 | ||
1298 | // Digits for ZEM | |
1299 | newdigit = new AliZDCDigit(3, 0, Digitize(3, 0, PMZEM)); | |
1300 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
1301 | fNdigits++; | |
1302 | delete newdigit; | |
1303 | ||
1304 | ||
1305 | gAlice->TreeD()->Fill(); | |
1306 | gAlice->TreeD()->Write(0,TObject::kOverwrite); | |
1307 | ||
1308 | // if(fDebug == 1){ | |
1309 | // printf("\n Event Digits -----------------------------------------------------\n"); | |
1310 | // fDigits->Print(""); | |
1311 | // } | |
1312 | ||
1313 | } | |
1314 | //_____________________________________________________________________________ | |
8064008b | 1315 | void AliZDCv2::MakeBranch(Option_t *opt, const char *file) |
4663d63d | 1316 | { |
1317 | // | |
1318 | // Create a new branch in the current Root Tree | |
1319 | // | |
1320 | ||
1321 | AliDetector::MakeBranch(opt); | |
1322 | ||
1323 | Char_t branchname[10]; | |
1324 | sprintf(branchname,"%s",GetName()); | |
1325 | const char *cD = strstr(opt,"D"); | |
1326 | ||
1327 | if (gAlice->TreeD() && cD) { | |
1328 | ||
1329 | // Creation of the digits from hits | |
1330 | ||
1331 | if(fDigits!=0) fDigits->Clear(); | |
1332 | else fDigits = new TClonesArray ("AliZDCDigit",1000); | |
1333 | char branchname[10]; | |
1334 | sprintf(branchname,"%s",GetName()); | |
8064008b | 1335 | MakeBranchInTree(gAlice->TreeD(), |
1336 | branchname, &fDigits, fBufferSize, file) ; | |
4663d63d | 1337 | printf("* AliZDCv2::MakeBranch * Making Branch %s for digits\n\n",branchname); |
1338 | } | |
1339 | ||
1340 | } | |
1341 | //_____________________________________________________________________________ | |
1342 | void AliZDCv2::StepManager() | |
1343 | { | |
1344 | // | |
1345 | // Routine called at every step in the Zero Degree Calorimeters | |
1346 | // | |
1347 | ||
1348 | Int_t j, vol[2], ibeta=0, ialfa, ibe, nphe; | |
1349 | Float_t x[3], xdet[3], destep, hits[10], m, ekin, um[3], ud[3], be, radius, out; | |
1350 | TLorentzVector s, p; | |
1351 | const char *knamed; | |
1352 | ||
1353 | for (j=0;j<10;j++) hits[j]=0; | |
1354 | ||
1355 | if((gMC->GetMedium() == fMedSensZN) || (gMC->GetMedium() == fMedSensZP) || | |
1356 | (gMC->GetMedium() == fMedSensGR) || (gMC->GetMedium() == fMedSensF1) || | |
1357 | (gMC->GetMedium() == fMedSensF2) || (gMC->GetMedium() == fMedSensZEM)){ | |
1358 | // (gMC->GetMedium() == fMedSensPI) || (gMC->GetMedium() == fMedSensTDI)){ | |
1359 | ||
1360 | // If particle interacts with beam pipe -> return | |
1361 | // if((gMC->GetMedium() == fMedSensPI) || (gMC->GetMedium() == fMedSensTDI)){ | |
1362 | // If option NoShower is set -> StopTrack | |
1363 | // if(fNoShower==1) { | |
1364 | // if(gMC->GetMedium() == fMedSensPI) { | |
1365 | // knamed = gMC->CurrentVolName(); | |
1366 | // if((!strncmp(knamed,"MQ",2)) || (!strncmp(knamed,"YM",2))) fpLostIT += 1; | |
1367 | // if((!strncmp(knamed,"MD1",3))|| (!strncmp(knamed,"YD1",2))) fpLostD1 += 1; | |
1368 | // } | |
1369 | // if(gMC->GetMedium() == fMedSensTDI) fpLostTDI += 1; | |
1370 | // gMC->StopTrack(); | |
1371 | // printf("\n # of p lost in Inner Triplet = %d\n",fpLostIT); | |
1372 | // printf("\n # of p lost in D1 = %d\n",fpLostD1); | |
1373 | // printf("\n # of p lost in TDI = %d\n",fpLostTDI); | |
4663d63d | 1374 | // } |
7cc664ae | 1375 | // return; |
4663d63d | 1376 | // } |
1377 | ||
1378 | //Particle coordinates | |
1379 | gMC->TrackPosition(s); | |
1380 | for(j=0; j<=2; j++){ | |
1381 | x[j] = s[j]; | |
1382 | } | |
1383 | hits[0] = x[0]; | |
1384 | hits[1] = x[1]; | |
1385 | hits[2] = x[2]; | |
1386 | ||
1387 | // Determine in which ZDC the particle is | |
1388 | knamed = gMC->CurrentVolName(); | |
1389 | if(!strncmp(knamed,"ZN",2))vol[0]=1; | |
1390 | if(!strncmp(knamed,"ZP",2))vol[0]=2; | |
1391 | if(!strncmp(knamed,"ZE",2))vol[0]=3; | |
1392 | ||
1393 | // Determine in which quadrant the particle is | |
1394 | ||
1395 | //Quadrant in ZN | |
1396 | if(vol[0]==1){ | |
1397 | xdet[0] = x[0]-fPosZN[0]; | |
1398 | xdet[1] = x[1]-fPosZN[1]; | |
1399 | if((xdet[0]<=0.) && (xdet[1]>=0.)) vol[1]=1; | |
1400 | if((xdet[0]>0.) && (xdet[1]>0.)) vol[1]=2; | |
1401 | if((xdet[0]<0.) && (xdet[1]<0.)) vol[1]=3; | |
1402 | if((xdet[0]>0.) && (xdet[1]<0.)) vol[1]=4; | |
1403 | } | |
1404 | ||
1405 | //Quadrant in ZP | |
1406 | if(vol[0]==2){ | |
1407 | xdet[0] = x[0]-fPosZP[0]; | |
1408 | xdet[1] = x[1]-fPosZP[1]; | |
1409 | if(xdet[0]>fDimZP[0])xdet[0]=fDimZP[0]-0.01; | |
1410 | if(xdet[0]<-fDimZP[0])xdet[0]=-fDimZP[0]+0.01; | |
1411 | Float_t xqZP = xdet[0]/(fDimZP[0]/2); | |
1412 | for(int i=1; i<=4; i++){ | |
1413 | if(xqZP>=(i-3) && xqZP<(i-2)){ | |
1414 | vol[1] = i; | |
1415 | break; | |
1416 | } | |
1417 | } | |
1418 | } | |
1419 | ||
1420 | //ZEM has only 1 quadrant | |
1421 | if(vol[0] == 3){ | |
1422 | vol[1] = 1; | |
1423 | xdet[0] = x[0]-fPosZEM[0]; | |
1424 | xdet[1] = x[1]-fPosZEM[1]; | |
1425 | } | |
1426 | ||
1427 | // Store impact point and kinetic energy of the ENTERING particle | |
1428 | ||
1429 | // if(Curtrack==Prim){ | |
1430 | if(gMC->IsTrackEntering()){ | |
1431 | //Particle energy | |
1432 | gMC->TrackMomentum(p); | |
1433 | hits[3] = p[3]; | |
1434 | // Impact point on ZDC | |
1435 | hits[4] = xdet[0]; | |
1436 | hits[5] = xdet[1]; | |
1437 | hits[6] = 0; | |
1438 | hits[7] = 0; | |
1439 | hits[8] = 0; | |
1440 | hits[9] = 0; | |
1441 | ||
1442 | // Int_t PcID = gMC->TrackPid(); | |
1443 | // printf("Pc ID -> %d\n",PcID); | |
1444 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1445 | ||
1446 | if(fNoShower==1){ | |
1447 | // fpDetected += 1; | |
1448 | gMC->StopTrack(); | |
1449 | // printf("\n # of detected p = %d\n",fpDetected); | |
1450 | return; | |
1451 | } | |
1452 | } | |
1453 | // } // Curtrack IF | |
1454 | ||
1455 | // Charged particles -> Energy loss | |
1456 | if((destep=gMC->Edep())){ | |
1457 | if(gMC->IsTrackStop()){ | |
1458 | gMC->TrackMomentum(p); | |
1459 | m = gMC->TrackMass(); | |
1460 | ekin = p[3]-m; | |
1461 | hits[9] = ekin; | |
1462 | hits[7] = 0.; | |
1463 | hits[8] = 0.; | |
1464 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1465 | } | |
1466 | else{ | |
1467 | hits[9] = destep; | |
1468 | hits[7] = 0.; | |
1469 | hits[8] = 0.; | |
1470 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1471 | } | |
1472 | // printf(" Dep. E = %f \n",hits[9]); | |
1473 | } | |
1474 | }// NB -> Questa parentesi (chiude il primo IF) io la sposterei al fondo!??? | |
1475 | ||
1476 | ||
1477 | // *** Light production in fibres | |
1478 | if((gMC->GetMedium() == fMedSensF1) || (gMC->GetMedium() == fMedSensF2)){ | |
1479 | ||
1480 | //Select charged particles | |
1481 | if((destep=gMC->Edep())){ | |
1482 | ||
1483 | // Particle velocity | |
1484 | gMC->TrackMomentum(p); | |
1485 | Float_t ptot=TMath::Sqrt(p[0]*p[0]+p[1]*p[1]+p[2]*p[2]); | |
1486 | Float_t beta = ptot/p[3]; | |
1487 | if(beta<0.67) return; | |
1488 | if((beta>=0.67) && (beta<=0.75)) ibeta = 0; | |
1489 | if((beta>0.75) && (beta<=0.85)) ibeta = 1; | |
1490 | if((beta>0.85) && (beta<=0.95)) ibeta = 2; | |
1491 | if(beta>0.95) ibeta = 3; | |
1492 | ||
1493 | // Angle between particle trajectory and fibre axis | |
1494 | // 1 -> Momentum directions | |
1495 | um[0] = p[0]/ptot; | |
1496 | um[1] = p[1]/ptot; | |
1497 | um[2] = p[2]/ptot; | |
1498 | gMC->Gmtod(um,ud,2); | |
1499 | // 2 -> Angle < limit angle | |
1500 | Double_t alfar = TMath::ACos(ud[2]); | |
1501 | Double_t alfa = alfar*kRaddeg; | |
1502 | if(alfa>=110.) return; | |
1503 | ialfa = Int_t(1.+alfa/2.); | |
1504 | ||
1505 | // Distance between particle trajectory and fibre axis | |
1506 | gMC->TrackPosition(s); | |
1507 | for(j=0; j<=2; j++){ | |
1508 | x[j] = s[j]; | |
1509 | } | |
1510 | gMC->Gmtod(x,xdet,1); | |
1511 | if(TMath::Abs(ud[0])>0.00001){ | |
1512 | Float_t dcoeff = ud[1]/ud[0]; | |
1513 | be = TMath::Abs((xdet[1]-dcoeff*xdet[0])/TMath::Sqrt(dcoeff*dcoeff+1.)); | |
1514 | } | |
1515 | else{ | |
1516 | be = TMath::Abs(ud[0]); | |
1517 | } | |
1518 | ||
1519 | if((vol[0]==1)) radius = fFibZN[1]; | |
1520 | if((vol[0]==2)) radius = fFibZP[1]; | |
1521 | ibe = Int_t(be*1000.+1); | |
1522 | ||
1523 | //Looking into the light tables | |
1524 | Float_t charge = gMC->TrackCharge(); | |
1525 | ||
1526 | // (1) ZN | |
1527 | if((vol[0]==1)) { | |
1528 | if(ibe>fNben) ibe=fNben; | |
1529 | out = charge*charge*fTablen[ibeta][ialfa][ibe]; | |
1530 | nphe = gRandom->Poisson(out); | |
1531 | // printf("ZN --- ibeta = %d, ialfa = %d, ibe = %d" | |
1532 | // " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe); | |
1533 | if(gMC->GetMedium() == fMedSensF1){ | |
1534 | hits[7] = nphe; //fLightPMQ | |
1535 | hits[8] = 0; | |
1536 | hits[9] = 0; | |
1537 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1538 | } | |
1539 | else{ | |
1540 | hits[7] = 0; | |
1541 | hits[8] = nphe; //fLightPMC | |
1542 | hits[9] = 0; | |
1543 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1544 | } | |
1545 | } | |
1546 | ||
1547 | // (2) ZP | |
1548 | if((vol[0]==2)) { | |
1549 | if(ibe>fNbep) ibe=fNbep; | |
1550 | out = charge*charge*fTablep[ibeta][ialfa][ibe]; | |
1551 | nphe = gRandom->Poisson(out); | |
1552 | // printf("ZP --- ibeta = %d, ialfa = %d, ibe = %d" | |
1553 | // " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe); | |
1554 | if(gMC->GetMedium() == fMedSensF1){ | |
1555 | hits[7] = nphe; //fLightPMQ | |
1556 | hits[8] = 0; | |
1557 | hits[9] = 0; | |
1558 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1559 | } | |
1560 | else{ | |
1561 | hits[7] = 0; | |
1562 | hits[8] = nphe; //fLightPMC | |
1563 | hits[9] = 0; | |
1564 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1565 | } | |
1566 | } | |
1567 | // (3) ZEM | |
1568 | if((vol[0]==3)) { | |
1569 | if(ibe>fNbep) ibe=fNbep; | |
1570 | out = charge*charge*fTablep[ibeta][ialfa][ibe]; | |
1571 | nphe = gRandom->Poisson(out); | |
1572 | // printf("ZEM --- ibeta = %d, ialfa = %d, ibe = %d" | |
1573 | // " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe); | |
1574 | hits[7] = 0; | |
1575 | hits[8] = nphe; //fLightPMC | |
1576 | hits[9] = 0; | |
1577 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1578 | } | |
1579 | } | |
1580 | } | |
1581 | } |