ALIROOT-5420 Changes for CDH v3
[u/mrichter/AliRoot.git] / ZDC / AliZDCv4.h
CommitLineData
2aaaf0b7 1#ifndef ALIZDCV4_H
2#define ALIZDCV4_H
3/* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * See cxx source for full Copyright notice */
5
6////////////////////////////////////////////////
7// Manager and hits classes for set: ZDC //
8////////////////////////////////////////////////
9
10#include "AliZDC.h"
11
12//____________________________________________________________________________
13class AliZDCv4 : public AliZDC {
14
15public:
16 AliZDCv4();
17 AliZDCv4(const char *name, const char *title);
18 virtual ~AliZDCv4() {}
19 virtual void CreateGeometry();
20 virtual void CreateBeamLine();
21 virtual void CreateZDC();
22 virtual void CreateMaterials();
23 virtual Int_t IsVersion() const {return 1;}
24 virtual void AddAlignableVolumes() const;
25 virtual void Init();
26 virtual void InitTables();
27 virtual void StepManager();
28
29 void SetVCollSideCAperture(Float_t aperture)
30 {if(aperture<3.5) fVCollSideCAperture = aperture;
31 else printf("\n\n AliZDCv4: WARNING! SideC TCTVB aperture set to max. value: 3.5 cm\n\n");}
32 void SetVCollSideCApertureNeg(Float_t aperture)
33 {if(aperture<3.5) fVCollSideCApertureNeg = aperture;
34 else printf("\n\n AliZDCv4: WARNING! SideC TCTVB aperture set to max. value: -3.5 cm\n\n");}
35 void SetVCollSideCCentre(Float_t centre) {fVCollSideCCentreY = centre;}
36
37 virtual void SetTCDDAperturePos(Float_t aperture)
38 {if(aperture<=2.2) fTCDDAperturePos = aperture;
39 else printf("\n\n AliZDCv4: WARNING! TCDD pos. aperture set to max. value: 2.0 cm\n\n");}
40 virtual void SetTCDDApertureNeg(Float_t aperture)
41 {if(aperture<=2.4) fTCDDApertureNeg = aperture;
42 else printf("\n\n AliZDCv4: WARNING! TCDD neg. aperture set to max. value: -2.2 cm\n\n");}
43
44
45 virtual void SetTDIAperturePos(Float_t aperture)
46 {if(aperture<=6.) fTDIAperturePos = aperture;
47 else printf("\n\n AliZDCv4: WARNING! TDI pos. aperture set to max. value: 6.0 cm\n\n");}
48 virtual void SetTDIApertureNeg(Float_t aperture)
49 {if(aperture<=6.) fTDIApertureNeg = aperture;
50 else printf("\n\n AliZDCv4: WARNING! TDI neg. aperture set to max. value: -6.0 cm\n\n");}
51
52 void SetLumiLength(Float_t length) {fLumiLength = length;}
53
54 void SetYZNC(Float_t yZNC) {fPosZNC[1] = yZNC;}
55 void SetYZNA(Float_t yZNA) {fPosZNA[1] = yZNA;}
56
57 void SetYZPC(Float_t yZPC) {fPosZPC[1] = yZPC;}
58 void SetYZPA(Float_t yZPA) {fPosZPA[1] = yZPA;}
59
60
61protected:
62
63 // Sensitive media
64 Int_t fMedSensF1; // Sensitive medium F1
65 Int_t fMedSensF2; // Sensitive medium F2
66 Int_t fMedSensZP; // Sensitive medium for ZP
67 Int_t fMedSensZN; // Sensitive medium for ZN
68 Int_t fMedSensZEM; // Sensitive medium for EM ZDC
69 Int_t fMedSensGR; // Other sensitive medium
70 Int_t fMedSensPI; // Beam pipe and magnet coils
71 Int_t fMedSensTDI; // Cu materials along beam pipe
72 Int_t fMedSensVColl; // W jaws of vertical collimators
73 Int_t fMedSensLumi; // luminometer medium
74
75 // Parameters for light tables
76 Int_t fNalfan; // Number of Alfa (neutrons)
77 Int_t fNalfap; // Number of Alfa (protons)
78 Int_t fNben; // Number of beta (neutrons)
79 Int_t fNbep; // Number of beta (protons)
80 Float_t fTablen[4][90][18]; // Neutrons light table
81 Float_t fTablep[4][90][28]; // Protons light table
82
83 // Parameters for hadronic calorimeters geometry
84 // NB -> parameters used in CreateZDC() and in StepManager()
85 // (other parameters are defined in CreateZDC())
86 Float_t fDimZN[3]; // Dimensions of proton detector
87 Float_t fDimZP[3]; // Dimensions of proton detector
88 Float_t fPosZNC[3]; // Position of neutron detector side C
89 Float_t fPosZNA[3]; // Position of neutron detector side A
90 Float_t fPosZPC[3]; // Position of proton detector side C
91 Float_t fPosZPA[3]; // Position of proton detector side A
92 Float_t fFibZN[3]; // Fibers for neutron detector
93 Float_t fFibZP[3]; // Fibers for proton detector
94
95 // Parameters for EM calorimeter geometry
96 // NB -> parameters used in CreateZDC() and in StepManager()
97 // (other parameters are defined in CreateZDC())
98 Float_t fPosZEM[3]; // Position of EM detector
99 Float_t fZEMLength; // ZEM length
100
101 // Parameters for proton accepancy studies
102 Int_t fpLostITC, fpLostD1C, fpcVCollC, fpDetectedC, fnDetectedC; // Side C
103 Int_t fpLostITA, fpLostD1A, fpLostTDI, fpcVCollA, fpDetectedA, fnDetectedA; // Side A
104
105 // Apertures to describe beam line elements variable apertures
106
107 // Vertical collimator
108 Float_t fVCollSideCAperture; // Semi-aperture of TCTVB jaws pos. y dir.
109 Float_t fVCollSideCApertureNeg; // Semi-aperture of TCTVB jaws neg. y dir (abs. value)
110 Float_t fVCollSideCCentreY; // Centre of TCTVB jaw apertures
111
112 // TCDD
113 Float_t fTCDDAperturePos; // TCDD semi-aperture pos. y dir.
114 Float_t fTCDDApertureNeg; // TCDD semi-aperture neg. y dir. (abs. value)
115
116 // TDI
117 Float_t fTDIAperturePos; // TDI semi-aperture pos. y dir.
118 Float_t fTDIApertureNeg; // TDI semi-aperture neg. y dir. (abs. value)
119
120 Float_t fLumiLength; // Luminometer length
121
122 ClassDef(AliZDCv4,1) // Zero Degree Calorimeter version 1
123};
124
125#endif