git://git.uio.no / u / mrichter / AliRoot.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Introduction of new ITS and CPV and PHOS separated
[u/mrichter/AliRoot.git] / macros / Config.C
CommitLineData
fe4da5cc 1void Config()
2{
3
4new TGeant3("C++ Interface to Geant3");
5
6//=======================================================================
7// Create the output file
8
9TFile *rootfile = new TFile("galice.root","recreate");
10rootfile->SetCompressionLevel(2);
11TGeant3 *geant3 = (TGeant3*)gMC;
12
13//=======================================================================
14// ******* GEANT STEERING parameters FOR ALICE SIMULATION *******
15geant3->SetTRIG(1); //Number of events to be processed
16geant3->SetSWIT(4,10);
17geant3->SetDEBU(0,0,1);
18//geant3->SetSWIT(2,2);
19geant3->SetDCAY(1);
20geant3->SetPAIR(1);
21geant3->SetCOMP(1);
22geant3->SetPHOT(1);
23geant3->SetPFIS(0);
24geant3->SetDRAY(0);
25geant3->SetANNI(1);
26geant3->SetBREM(1);
27geant3->SetMUNU(1);
28geant3->SetCKOV(1);
29geant3->SetHADR(1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
30geant3->SetLOSS(2);
31geant3->SetMULS(1);
32geant3->SetRAYL(1);
33geant3->SetAUTO(1); //Select automatic STMIN etc... calc. (AUTO 1) or manual (AUTO 0)
34geant3->SetABAN(0); //Restore 3.16 behaviour for abandoned tracks
35geant3->SetOPTI(2); //Select optimisation level for GEANT geometry searches (0,1,2)
36Float_t cut = 1.e-3; // 1MeV cut by default
37Float_t tofmax = 1.e10;
38// GAM ELEC NHAD CHAD MUON EBREM MUHAB EDEL MUDEL MUPA TOFMAX
39geant3->SetCUTS(cut,cut, cut, cut, cut, cut, cut, cut, cut, cut, tofmax);
40//
41//=======================================================================
42// ************* STEERING parameters FOR ALICE SIMULATION **************
43// --- Specify event type to be tracked through the ALICE setup
44// --- All positions are in cm, angles in degrees, and P and E in GeV
45AliGenHIJINGpara *gener = new AliGenHIJINGpara(50);
46gener->SetMomentumRange(0,999);
47gener->SetPhiRange(0,360);
48gener->SetThetaRange(10,170);
49gener->SetOrigin(0,0,0); //vertex position
50gener->SetSigma(0,0,0); //Sigma in (X,Y,Z) (cm) on IP position
51gener->Init();
52//
53// Activate this line if you want the vertex smearing to happen
54// track by track
55//
56//gener->SetVertexSmear(perTrack);
57
58gAlice->SetField(-999,2); //Specify maximum magnetic field in Tesla (neg. ==> default field)
59
60Int_t iMAG=1;
61Int_t iITS=1;
62Int_t iTPC=1;
63Int_t iTOF=1;
64Int_t iRICH=1;
4048e88d 65Int_t iZDC=0;
fe4da5cc 66Int_t iCASTOR=1;
67Int_t iTRD=1;
68Int_t iABSO=1;
69Int_t iDIPO=1;
70Int_t iHALL=1;
43f0a169 71Int_t iFRAME=1;
fe4da5cc 72Int_t iSHIL=1;
73Int_t iPIPE=1;
74Int_t iFMD=1;
75Int_t iMUON=1;
76Int_t iPHOS=1;
8dfe31df 77Int_t iCPV=1;
fe4da5cc 78Int_t iPMD=1;
b422f318 79Int_t iSTART=0;
fe4da5cc 80
81//=================== Alice BODY parameters =============================
82AliBODY *BODY = new AliBODY("BODY","Alice envelop");
83
84
85if(iMAG) {
86//=================== MAG parameters ============================
87// --- Start with Magnet since detector layouts may be depending ---
88// --- on the selected Magnet dimensions ---
89AliMAG *MAG = new AliMAG("MAG","Magnet");
90}
91
4b11ac09 92
93if(iABSO) {
94//=================== ABSO parameters ============================
95AliABSO *ABSO = new AliABSO("ABSO","Muon Absorber");
96}
97
98if(iDIPO) {
99//=================== DIPO parameters ============================
100
101AliDIPO *DIPO = new AliDIPOv2("DIPO","Dipole version 2");
102}
103
104if(iHALL) {
105//=================== HALL parameters ============================
106
107AliHALL *HALL = new AliHALL("HALL","Alice Hall");
108}
109
110
111if(iFRAME) {
112//=================== FRAME parameters ============================
113
114AliFRAME *FRAME = new AliFRAMEv0("FRAME","Space Frame");
115}
116
117if(iSHIL) {
118//=================== SHIL parameters ============================
119
120AliSHIL *SHIL = new AliSHIL("SHIL","Shielding");
121}
122
123
124if(iPIPE) {
125//=================== PIPE parameters ============================
126
127AliPIPE *PIPE = new AliPIPEv0("PIPE","Beam Pipe");
128}
129
130
fe4da5cc 131if(iITS) {
132//=================== ITS parameters ============================
133//
134// EUCLID is a flag to output (=1) both geometry and media to two ASCII files
135// (called by default ITSgeometry.euc and ITSgeometry.tme) in a format
136// understandable to the CAD system EUCLID. The default (=0) means that you
137// dont want to use this facility.
138//
8dfe31df 139AliITS *ITS = new AliITSv5("ITS","normal ITS");
140ITS->SetEUCLID(0);
fe4da5cc 141}
142
143if(iTPC) {
144//============================ TPC parameters ================================
145// --- This allows the user to specify sectors for the SLOW (TPC geometry 2)
146// --- Simulator. SecAL (SecAU) <0 means that ALL lower (upper)
147// --- sectors are specified, any value other than that requires at least one
148// --- sector (lower or upper)to be specified!
149// --- Reminder: sectors 1-24 are lower sectors (1-12 -> z>0, 13-24 -> z<0)
150// --- sectors 25-72 are the upper ones (25-48 -> z>0, 49-72 -> z<0)
151// --- SecLows - number of lower sectors specified (up to 6)
152// --- SecUps - number of upper sectors specified (up to 12)
153// --- Sens - sensitive strips for the Slow Simulator !!!
154// --- This does NOT work if all S or L-sectors are specified, i.e.
155// --- if SecAL or SecAU < 0
156//
157//
158//-----------------------------------------------------------------------------
159
160AliTPC *TPC = new AliTPCv1("TPC","Normal TPC");
50e125f7 161AliTPCD *paramd = TPC->GetDigParam();
162AliTPCParam *param = &(paramd->GetParam());
163
164// Set geometrical parameters
165
166param->SetSectorAngles(40.,0.,20.,10.);
167param->SetInnerRadiusLow(83.7);
168param->SetInnerRadiusUp(132.9);
169param->SetOuterRadiusLow(146.9);
170param->SetOuterRadiusUp(249.4);
171param->SetInSecLowEdge(81.6);
172param->SetInSecUpEdge(135.);
173param->SetOuSecLowEdge(144.2);
174param->SetOuSecUpEdge(252.1);
175param->SetEdge(1.5);
176param->SetDeadZone(1.15);
177param->Update();
178
179// set gas mixture
180
181TPC->SetGasMixt(2,20,10,-1,0.9,0.1,0.);
fe4da5cc 182TPC->SetSecAL(1);
183TPC->SetSecAU(1);
50e125f7 184TPC->SetSecLows(0, -1, -1, -1, -1, -1);
185TPC->SetSecUps(18, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1);
186TPC->SetSens(-1);
fe4da5cc 187}
188
189if(iTOF) {
190//=================== TOF parameters ============================
191AliTOF *TOF = new AliTOFv2("TOF","normal TOF");
192}
193
194if(iRICH) {
195//=================== RICH parameters ===========================
196
206e3707 197 AliRICH *RICH = new AliRICHv0("RICH","normal RICH");
fe4da5cc 198
206e3707 199 RICH->SetSMAXAR(0.03);
200 RICH->SetSMAXAL(-1);
201//
202// Version 0
203// Default Segmentation
204 AliRICHsegmentationV0* RsegV0 = new AliRICHsegmentationV0;
205 RsegV0->SetPADSIZ(.8, .8);
206 RsegV0->SetDAnod(0.8/3);
207// Default response
208 AliRICHresponseV0* Rresponse0 = new AliRICHresponseV0;
209 AliRICHresponseCkv* RresponseCkv = new AliRICHresponseCkv;
210
211//------------------------Chambers 0-6 ----------------------------
212 for (Int_t i=0; i<7; i++) {
213 RICH->SetSegmentationModel(i, 1, RsegV0);
214 RICH->SetResponseModel(i, mip , Rresponse0);
215 RICH->SetResponseModel(i, cerenkov, RresponseCkv);
216 RICH->Chamber(i).SetRSIGM(5.);
217 RICH->Chamber(i).SetMUCHSP(43.);
218 RICH->Chamber(i).SetMUSIGM(0.18, 0.18);
219 RICH->Chamber(i).SetMAXADC( 1024);
220 RICH->Chamber(i).SetSqrtKx3(0.77459667);
221 RICH->Chamber(i).SetKx2(0.962);
222 RICH->Chamber(i).SetKx4(0.379);
223 RICH->Chamber(i).SetSqrtKy3(0.77459667);
224 RICH->Chamber(i).SetKy2(0.962);
225 RICH->Chamber(i).SetKy4(0.379);
226 RICH->Chamber(i).SetPitch(0.25);
227 RICH->SetNsec(i,1);
228 }
fe4da5cc 229}
230
231if(iZDC) {
232//=================== ZDC parameters ============================
233
234AliZDC *ZDC = new AliZDCv1("ZDC","normal ZDC");
235}
236
237if(iCASTOR) {
238//=================== CASTOR parameters ============================
239
240AliCASTOR *CASTOR = new AliCASTORv1("CASTOR","normal CASTOR");
241}
242
243if(iTRD) {
244//=================== TRD parameters ============================
245
50772691 246AliTRD *TRD = new AliTRDv0("TRD","TRD version 0");
43f0a169 247// Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
248TRD->SetGasMix(0);
50772691 249TRD->SetHits(1);
fe4da5cc 250}
251
fe4da5cc 252if(iFMD) {
253//=================== FMD parameters ============================
254
255AliFMD *FMD = new AliFMDv1("FMD","normal FMD");
256}
257
258if(iMUON) {
259//=================== MUON parameters ===========================
260
261AliMUON *MUON = new AliMUONv0("MUON","normal MUON");
262
916c29ab 263 MUON->SetMaxStepGas(0.1);
264 MUON->SetMaxStepAlu(0.1);
265//
fe4da5cc 266// Version 0
267//
268// First define the number of planes that are segmented (1 or 2) by a call
269// to SetNsec.
270// Then chose for each chamber (chamber plane) the segmentation
271// and response model.
272// They should be equal for the two chambers of each station. In a future
273// version this will be enforced.
274//
275//
276 Int_t chamber;
277 Int_t station;
fe4da5cc 278// Default response
279 AliMUONresponseV0* response0 = new AliMUONresponseV0;
0f5936af 280 response0->SetSqrtKx3(0.7131);
281 response0->SetKx2(1.0107);
282 response0->SetKx4(0.4036);
283 response0->SetSqrtKy3(0.7642);
284 response0->SetKy2(0.9706);
285 response0->SetKy4(0.3831);
fe4da5cc 286 response0->SetPitch(0.25);
0f5936af 287 response0->SetSigmaIntegration(10.);
288 response0->SetChargeSlope(50);
289 response0->SetChargeSpread(0.18, 0.18);
290 response0->SetMaxAdc(4096);
fe4da5cc 291//--------------------------------------------------------
292// Configuration for Chamber TC1/2 (Station 1) ----------
293//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0f5936af 294// Float_t rseg1[4]={17.5, 55.2, 71.3, 95.5};
295 Float_t rseg1[4]={15.5, 55.2, 71.3, 95.5};
296 Int_t nseg1[4]={4, 4, 2, 1};
297//
fe4da5cc 298 chamber=1;
299//^^^^^^^^^
300 MUON->SetNsec(chamber-1,2);
301//
302 AliMUONsegmentationV01 *seg11=new AliMUONsegmentationV01;
0f5936af 303
304 seg11->SetSegRadii(rseg1);
305 seg11->SetPADSIZ(3, 0.5);
306 seg11->SetDAnod(3.0/3./4);
307 seg11->SetPadDivision(nseg1);
308
fe4da5cc 309 MUON->SetSegmentationModel(chamber-1, 1, seg11);
310//
0f5936af 311 AliMUONsegmentationV02 *seg12=new AliMUONsegmentationV02;
312 seg12->SetSegRadii(rseg1);
313 seg12->SetPADSIZ(0.75, 2.0);
314 seg12->SetDAnod(3.0/3./4);
315 seg12->SetPadDivision(nseg1);
fe4da5cc 316
317 MUON->SetSegmentationModel(chamber-1, 2, seg12);
318
0f5936af 319 MUON->SetResponseModel(chamber-1, response0);
320
fe4da5cc 321 chamber=2;
322//^^^^^^^^^
0f5936af 323//
fe4da5cc 324 MUON->SetNsec(chamber-1,2);
0f5936af 325//
326 AliMUONsegmentationV01 *seg21=new AliMUONsegmentationV01;
327 seg21->SetSegRadii(rseg1);
328 seg21->SetPADSIZ(3, 0.5);
329 seg21->SetDAnod(3.0/3./4);
330 seg21->SetPadDivision(nseg1);
331 MUON->SetSegmentationModel(chamber-1, 1, seg21);
332//
333 AliMUONsegmentationV02 *seg22=new AliMUONsegmentationV02;
334 seg22->SetSegRadii(rseg1);
335 seg22->SetPADSIZ(0.75, 2.);
336 seg22->SetDAnod(3.0/3./4);
337 seg22->SetPadDivision(nseg1);
338 MUON->SetSegmentationModel(chamber-1, 2, seg22);
fe4da5cc 339
0f5936af 340 MUON->SetResponseModel(chamber-1, response0);
fe4da5cc 341//
342//--------------------------------------------------------
343// Configuration for Chamber TC3/4 -----------------------
344//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0f5936af 345// Float_t rseg2[4]={23.5, 47.1, 87.7, 122.5};
346 Float_t rseg2[4]={21.5, 47.1, 87.7, 122.5};
347 Int_t nseg2[4]={4, 4, 2, 1};
348//
fe4da5cc 349 chamber=3;
0f5936af 350//^^^^^^^^^
351 MUON->SetNsec(chamber-1,2);
352//
353 AliMUONsegmentationV01 *seg31=new AliMUONsegmentationV01;
354 seg31->SetSegRadii(rseg2);
355 seg31->SetPADSIZ(3, 0.5);
356 seg31->SetDAnod(3.0/3./4);
357 seg31->SetPadDivision(nseg2);
358 MUON->SetSegmentationModel(chamber-1, 1, seg31);
359//
360 AliMUONsegmentationV02 *seg32=new AliMUONsegmentationV02;
361 seg32->SetSegRadii(rseg2);
362 seg32->SetPADSIZ(0.75, 2.);
363 seg32->SetPadDivision(nseg2);
364 seg32->SetDAnod(3.0/3./4);
365
366 MUON->SetSegmentationModel(chamber-1, 2, seg32);
367
fe4da5cc 368 MUON->SetResponseModel(chamber-1, response0);
369
370 chamber=4;
0f5936af 371//^^^^^^^^^
fe4da5cc 372//
0f5936af 373 MUON->SetNsec(chamber-1,2);
374//
375 AliMUONsegmentationV01 *seg41=new AliMUONsegmentationV01;
376 seg41->SetSegRadii(rseg2);
377 seg41->SetPADSIZ(3, 0.5);
378 seg41->SetDAnod(3.0/3./4);
379 seg41->SetPadDivision(nseg2);
380 MUON->SetSegmentationModel(chamber-1, 1, seg41);
fe4da5cc 381//
0f5936af 382 AliMUONsegmentationV02 *seg42=new AliMUONsegmentationV02;
383 seg42->SetSegRadii(rseg2);
384 seg42->SetPADSIZ(0.75, 2.);
385 seg42->SetPadDivision(nseg2);
386 seg42->SetDAnod(3.0/3./4);
387
388 MUON->SetSegmentationModel(chamber-1, 2, seg42);
389
390 MUON->SetResponseModel(chamber-1, response0);
391
392
fe4da5cc 393//--------------------------------------------------------
394// Configuration for Chamber TC5/6 -----------------------
395//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
916c29ab 396/*
fe4da5cc 397 seg5 = new AliMUONsegmentationV1;
398 AliMUONresponseV0* response5 = new AliMUONresponseV0;
399 // K3 = 0.62
400 response5->SetSqrtKx3(0.78740079);
401 response5->SetKx2(0.95237319); // 0.5 * kPI * (1- 0.5*sqrtky3 )
402 response5->SetKx4(0.37480633); // 0.25/TMath::ATan(sqrtkx3)
403 // K3 = 0.55
404 response5->SetSqrtKy3(0.74161985);
405 response5->SetKy2(0.98832946);
406 response5->SetKy4(0.39177817);
407 response5->SetPitch(0.325);
0f5936af 408 response5->SetSigmaIntegration(10.);
409 response5->SetChargeSlope(50);
410 response5->SetChargeSpread(0.4, 0.4);
411 response5->SetMaxAdc(4096);
fe4da5cc 412
413 chamber=5;
414 MUON->SetNsec(chamber-1,1);
415 MUON->SetSegmentationModel(chamber-1, 1, seg5);
416 MUON->SetResponseModel(chamber-1, response5);
417
418 chamber=6;
419 MUON->SetNsec(chamber-1,1);
420 MUON->SetSegmentationModel(chamber-1, 1, seg5);
421 MUON->SetResponseModel(chamber-1, response5);
422//
423// Station 3
424 station=3;
425 MUON->SetPADSIZ(station, 1, 0.975, 0.55);
916c29ab 426*/
427
428 chamber=5;
429//^^^^^^^^^
430 MUON->SetNsec(chamber-1,2);
431//
432 AliMUONsegmentationV0 *seg51=new AliMUONsegmentationV0;
433 seg51->SetPADSIZ(0.75, 0.5);
434 seg51->SetDAnod(3.0/3./4);
435 MUON->SetSegmentationModel(chamber-1, 1, seg51);
436//
437 AliMUONsegmentationV0 *seg52=new AliMUONsegmentationV0;
438 seg52->SetPADSIZ(0.5,0.75);
439 seg52->SetDAnod(3.0/3./4);
440 MUON->SetSegmentationModel(chamber-1, 2, seg52);
441
442 MUON->SetResponseModel(chamber-1, response0);
443
444 chamber=6;
445//^^^^^^^^^
446 MUON->SetNsec(chamber-1,2);
447//
448 AliMUONsegmentationV0 *seg61=new AliMUONsegmentationV0;
449 seg61->SetPADSIZ(0.75, 0.5);
450 seg61->SetDAnod(3.0/3./4);
451 MUON->SetSegmentationModel(chamber-1, 1, seg61);
452//
453 AliMUONsegmentationV0 *seg62=new AliMUONsegmentationV0;
454 seg62->SetPADSIZ(0.5,0.75);
455 seg62->SetDAnod(3.0/3./4);
456 MUON->SetSegmentationModel(chamber-1, 2, seg62);
457
458 MUON->SetResponseModel(chamber-1, response0);
fe4da5cc 459
fe4da5cc 460//--------------------------------------------------------
0f5936af 461// Configuration for Chamber TC7/8 (Station 4) ----------
fe4da5cc 462//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
463
0f5936af 464 Int_t nseg4[4]={4, 4, 2, 1};
465
fe4da5cc 466 chamber=7;
0f5936af 467//^^^^^^^^^
468 MUON->SetNsec(chamber-1,2);
469//
470 AliMUONsegmentationV04 *seg71=new AliMUONsegmentationV04;
471 seg71->SetPADSIZ(10.,0.5);
472 seg71->SetDAnod(0.25);
473 seg71->SetPadDivision(nseg4);
474 MUON->SetSegmentationModel(chamber-1, 1, seg71);
475
476 AliMUONsegmentationV05 *seg72=new AliMUONsegmentationV05;
477 seg72->SetPADSIZ(1,10);
478 seg72->SetDAnod(0.25);
479 seg72->SetPadDivision(nseg4);
480 MUON->SetSegmentationModel(chamber-1, 2, seg72);
fe4da5cc 481
fe4da5cc 482 MUON->SetResponseModel(chamber-1, response0);
483
484 chamber=8;
0f5936af 485//^^^^^^^^^
486 MUON->SetNsec(chamber-1,2);
487 AliMUONsegmentationV04 *seg81=new AliMUONsegmentationV04;
488 seg81->SetPADSIZ(10., 0.5);
489 seg81->SetPadDivision(nseg4);
490 seg81->SetDAnod(0.25);
491 MUON->SetSegmentationModel(chamber-1, 1, seg81);
492
493 AliMUONsegmentationV05 *seg82=new AliMUONsegmentationV05;
494 seg82->SetPADSIZ(1, 10);
495 seg82->SetPadDivision(nseg4);
496 seg82->SetDAnod(0.25);
497 MUON->SetSegmentationModel(chamber-1, 2, seg82);
498
fe4da5cc 499 MUON->SetResponseModel(chamber-1, response0);
0f5936af 500//--------------------------------------------------------
501// Configuration for Chamber TC9/10 (Station 5) ---------
502//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
503 chamber=9;
504//^^^^^^^^^
505 MUON->SetNsec(chamber-1,2);
fe4da5cc 506//
0f5936af 507 AliMUONsegmentationV04 *seg91=new AliMUONsegmentationV04;
508 seg91->SetPADSIZ(10.,0.5);
509 seg91->SetDAnod(0.25);
510 seg91->SetPadDivision(nseg4);
511 MUON->SetSegmentationModel(chamber-1, 1, seg91);
fe4da5cc 512
0f5936af 513 AliMUONsegmentationV05 *seg92=new AliMUONsegmentationV05;
514 seg92->SetPADSIZ(1,10);
515 seg92->SetDAnod(0.25);
516 seg92->SetPadDivision(nseg4);
517
518 MUON->SetSegmentationModel(chamber-1, 2, seg92);
fe4da5cc 519
fe4da5cc 520 MUON->SetResponseModel(chamber-1, response0);
521
522 chamber=10;
0f5936af 523//^^^^^^^^^
524 MUON->SetNsec(chamber-1,2);
525 AliMUONsegmentationV04 *seg101=new AliMUONsegmentationV04;
526 seg101->SetPADSIZ(10., 0.5);
527 seg101->SetPadDivision(nseg4);
528 seg101->SetDAnod(0.25);
529 MUON->SetSegmentationModel(chamber-1, 1, seg101);
530
531 AliMUONsegmentationV05 *seg102=new AliMUONsegmentationV05;
532 seg102->SetPADSIZ(1,10);
533 seg102->SetPadDivision(nseg4);
534 seg102->SetDAnod(0.25);
535 MUON->SetSegmentationModel(chamber-1, 2, seg102);
536
fe4da5cc 537 MUON->SetResponseModel(chamber-1, response0);
0f5936af 538//--------------------------------------------------------
539// Configuration for Trigger staions ---------------------
540// (not yet used/implemented) ----------------------------
541//^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
fe4da5cc 542
543 chamber=11;
544 MUON->SetNsec(chamber-1,1);
545 AliMUONsegmentationV0 *seg1112=new AliMUONsegmentationV0;
546 seg1112->SetDAnod(0.51/3.);
547
548 MUON->SetSegmentationModel(chamber-1, 1, seg1112);
549 MUON->SetResponseModel(chamber-1, response0);
550
551 chamber=12;
552 MUON->SetNsec(chamber-1,1);
553 MUON->SetSegmentationModel(chamber-1, 1, seg1112);
554 MUON->SetResponseModel(chamber-1, response0);
555//
556// Trigger Station 1
557 station=6;
558 MUON->SetPADSIZ(station, 1, 0.75, 0.5);
559
560 chamber=13;
561 MUON->SetNsec(chamber-1,1);
562 AliMUONsegmentationV0 *seg1314=new AliMUONsegmentationV0;
563 seg1314->SetDAnod(0.51/3.);
564
565 MUON->SetSegmentationModel(chamber-1, 1, seg1314);
566 MUON->SetResponseModel(chamber-1, response0);
567
568 chamber=14;
569 MUON->SetNsec(chamber-1,1);
570 MUON->SetSegmentationModel(chamber-1, 1, seg1314);
571 MUON->SetResponseModel(chamber-1, response0);
572//
573// Trigger Station 2
574 station=7;
575 MUON->SetPADSIZ(station, 1, 0.75, 0.5);
576}
0f5936af 577
fe4da5cc 578//=================== PHOS parameters ===========================
579
8dfe31df 580if(iPHOS) {
fe4da5cc 581AliPHOS *PHOS = new AliPHOSv1("PHOS","normal PHOS");
582// * PHOSflags: YES: X<>0 NO: X=0
583// * PHOSflags(1) : -----X Create branch for TObjArray of AliPHOSCradle
584// * ----X- Create file (ftn03 on HP-UX) with list of SHAKER particles (7Mb/event)
585// *
586PHOS->SetFlags(000001);
587PHOS->SetRadius(460); //Distance from beam to PHOS crystals.
588// (crystal_side_size,crystal_length,wrap_thikness,air_thikness,PIN_size,PIN length)
589PHOS->SetCell(2.2, 18., 0.01, 0.01, 1., 0.1);
8dfe31df 590PHOS->SetCradleSize(48, 90, 4); // Nz (along beam), Nphi, Ncradles
fe4da5cc 591PHOS->SetCradleA(0); //Angle between Cradles
fe4da5cc 592// * ===============
593// * PHOS extra parameters (contact Maxim Volkov volkov@mail.cern.ch)
594// * 1. STE_THICK Steel cover thickness
595// * 2. SUP_Y Crystal support height
596// * 3. FTIU_THICK Thermo Insulating outer cover Upper plate thickness
597// * 4. UFP_Y Upper Polystyrene Foam plate thickness
598// * 5. TCB_THICK Thermo insulating Crystal Block wall thickness
599// * 6. UCP_Y Upper Cooling Plate thickness
600// * 7. ASP_Y Al Support Plate thickness
601// * 8. TIP_Y Lower Thermo Insulating Plate thickness
602// * 9. TXP_Y Lower Textolit Plate thickness
603PHOS->SetExtra(0.001, 6.95, 4., 5., 2., 0.06, 10., 3., 1.);
604PHOS->SetTextolitWall(209., 71., 250.); //Textolit Wall box dimentions
605PHOS->SetInnerAir(206., 66., 244.); //Inner AIR volume dimensions
606// * ===============================
607// * 1. FTI_X Foam Thermo Insulating outer cover dimensions
608// * 2. FTI_Y ==//==
609// * 3. FTI_Z ==//==
610// * 4. FTI_R Distance from IP to Foam Thermo Insulating top plate
611PHOS->SetFoam(214.6, 80., 260., 467.);
612// =================================
613// *******************************************************************************
614// * KINE 700 - SHAKER generator
615// * KINE 700 x y z NDNDY YLIM PTLIM ChargeFlag
616// * JWEAK=0
617// * JPI0=JETA=1
618// * JPIC=JPRO=JKAC=JKA0=JRHO=JOME=JPHI=JPSI=JDRY=ChargeFlag
619// * Int_t JWEI; // Unweighted generation
620// * Int_t NDNDY; // Density of charged particles
621// * Float_t YLIM; // Rapidity Limit
622// * Float_t PTLIM; // Pt limit in GeV/c
623// * Int_t JWEAK; // Disable weak decays
624// * Int_t JPI0; // pi0 generation
625// * Int_t JETA; // eta generation
626// * Int_t JPIC; // pi+/- generation
627// * Int_t JPRO; // proton generation
628// * Int_t JKAC; // K+/- generation
629// * Int_t JKA0; // K0 generation
630// * Int_t JRHO; // rho generation
631// * Int_t JOME; // omega generation
632// * Int_t JPHI; // phi generation
633// * Int_t JPSI; // J/psi generation
634// * Int_t JDRY; // Drell-Yan generation
635// * KINE 700 5. 175. 0. 800. 1.5 5. 1.
636// *******************************************************************************
637}
638
8dfe31df 639if(iCPV) {
640//=================== CPV parameters ============================
641
642 printf ("CPV in initializing\n");
643 AliCPV *CPV = new AliCPVv0("CPV","normal CPV");
644}
645
646
fe4da5cc 647if(iPMD) {
648//=================== PMD parameters ============================
649
ecd5c1f7 650AliPMD *PMD = new AliPMDv0("PMD","normal PMD");
fe4da5cc 651PMD->SetPAR(1., 1., 0.8, 0.02);
ecd5c1f7 652PMD->SetIN(6., 18., -580., 27., 27.);
fe4da5cc 653PMD->SetGEO(0.0, 0.2, 4.);
ecd5c1f7 654PMD->SetPadSize(0.8, 1.0, 1.0, 1.5);
655
fe4da5cc 656}
b422f318 657
658if(iSTART) {
659//=================== START parameters ============================
660AliSTART *START = new AliSTARTv0("START","START Detector");
661}
662
fe4da5cc 663
664}