Right values for misalignement randomly distributed according to a gaussian

[u/mrichter/AliRoot.git] / macros / g4ConfigCommon.C

// $Id$
//
// AliRoot Configuration for running aliroot with Monte Carlo.
// Called from g4Config.C

Float_t EtaToTheta(Float_t arg);
static Int_t    eventsPerRun = 100;

void ConfigCommon(Bool_t interactiveSetup)
{
  // ============================= 
  // Root file
  // ============================= 

  // Create the output file
  AliRunLoader* rl = 0;
  rl = AliRunLoader::Open("galice.root",
			   AliConfig::GetDefaultEventFolderName(),
			   "recreate");
  if (!rl) {
    gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
    return;
  }
  rl->SetCompressionLevel(2);
  rl->SetNumberOfEventsPerFile(3);
  gAlice->SetRunLoader(rl);

  // Set External decayer
  AliDecayer* decayer = new AliDecayerPythia();
  decayer->SetForceDecay(kAll);
  decayer->Init();
  gMC->SetExternalDecayer(decayer);

  // Physics process control
  gMC ->SetProcess("DCAY",1);
  gMC ->SetProcess("PAIR",1);
  gMC ->SetProcess("COMP",1);
  gMC ->SetProcess("PHOT",1);
  gMC ->SetProcess("PFIS",0);
  gMC ->SetProcess("DRAY",0);
  gMC ->SetProcess("ANNI",1);
  gMC ->SetProcess("BREM",1);
  gMC ->SetProcess("MUNU",1);
  //xx gMC ->SetProcess("CKOV",1);
  gMC ->SetProcess("HADR",1); //Select pure GEANH (HADR 1) or GEANH/NUCRIN (HADR 3)
  gMC ->SetProcess("LOSS",2);
  gMC ->SetProcess("MULS",1);
  //xx gMC ->SetProcess("RAYL",1);

  // Energy cuts
  // (in development)
  Float_t cut    = 1.e-3; // 1MeV cut by default
  Float_t tofmax = 1.e10; 

  gMC ->SetCut("CUTGAM",cut);
  gMC ->SetCut("CUTELE",cut);
  gMC ->SetCut("CUTNEU",cut);
  gMC ->SetCut("CUTHAD",cut);
  gMC ->SetCut("CUTMUO",cut);
  gMC ->SetCut("BCUTE",cut);
  gMC ->SetCut("BCUTM",cut);
  gMC ->SetCut("DCUTE",cut);
  gMC ->SetCut("DCUTM",cut);
  gMC ->SetCut("PPCUTM",cut);
  gMC ->SetCut("TOFMAX",tofmax);

  // ============================= 
  // Event generator
  // ============================= 

  // --- Specify event type to be tracked through the ALICE setup
  // --- All positions are in cm, angles in degrees, and P and E in GeV

  Int_t nParticles = 100;
  if (gSystem->Getenv("CONFIG_NPARTICLES")) 
    nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));

  AliGenCocktail *gener = new AliGenCocktail();
  gener->SetPhiRange(0, 360);
  // Set pseudorapidity range from -8 to 8.
  Float_t thmin = EtaToTheta(8);   // theta min. <---> eta max
  Float_t thmax = EtaToTheta(-8);  // theta max. <---> eta min 
  gener->SetThetaRange(thmin,thmax);
  gener->SetOrigin(0, 0, 0);  //vertex position
  gener->SetSigma(0, 0, 0);   //Sigma in (X,Y,Z) (cm) on IP position

  AliGenHIJINGpara *hijingparam = new AliGenHIJINGpara(nParticles);
  hijingparam->SetMomentumRange(0.2, 999);
  gener->AddGenerator(hijingparam,"HIJING PARAM",1);

  //    AliGenBox *genbox = new AliGenBox(nParticles);
  //    genbox->SetPart(22);
  //    genbox->SetPtRange(0.3, 10.00);
  //    gener->AddGenerator(genbox,"GENBOX GAMMA for PHOS",1);
  gener->Init();

  // Activate this line if you want the vertex smearing to happen
  // track by track

  //gener->SetVertexSmear(perTrack); 

  // ============================= 
  // Magnetic field
  // ============================= 

  // Field (L3 0.4 T)
  AliMagFMaps* field = new AliMagFMaps("Maps","Maps", 2, 1., 10., 1);
  gAlice->SetField(field);    
  
  // Old magnetic field
  //gAlice->SetField(-999,2);    //Specify maximum magnetic field in Tesla (neg. ==> default field)

  // ============================= 
  // Alice modules
  // ============================= 

  if (!interactiveSetup) {

    // Select modules 
  Int_t iABSO  = 1;
  Int_t iDIPO  = 1;
  Int_t iFMD   = 1;
  Int_t iFRAME = 1;
  Int_t iHALL  = 1;
  Int_t iITS   = 1;
  Int_t iMAG   = 1;
  Int_t iMUON  = 1;
  Int_t iPHOS  = 1;
  Int_t iPIPE  = 1;
  Int_t iPMD   = 1;
  Int_t iRICH  = 1;
  Int_t iSHIL  = 1;
  Int_t iSTART = 1;
  Int_t iTOF   = 1;
  Int_t iTPC   = 1;
  Int_t iTRD   = 1;
  Int_t iZDC   = 1;
  Int_t iEMCAL = 1;
  Int_t iCRT   = 0;  
  Int_t iVZERO = 1;

  // ONLY FOR GEANT4

  // Exclude detectors with temporary problem
  iCRT = 0;
  iEMCAL = 0;
 
  // END OF ONLY FOR GEANT4


    //=================== Alice BODY parameters =============================
    AliBODY *BODY = new AliBODY("BODY", "Alice envelop");


    if (iMAG)
    {
        //=================== MAG parameters ============================
        // --- Start with Magnet since detector layouts may be depending ---
        // --- on the selected Magnet dimensions ---
        AliMAG *MAG = new AliMAG("MAG", "Magnet");
    }


    if (iABSO)
    {
        //=================== ABSO parameters ============================
        AliABSO *ABSO = new AliABSOv0("ABSO", "Muon Absorber");
    }

    if (iDIPO)
    {
        //=================== DIPO parameters ============================

        AliDIPO *DIPO = new AliDIPOv2("DIPO", "Dipole version 2");
    }

    if (iHALL)
    {
        //=================== HALL parameters ============================

        AliHALL *HALL = new AliHALL("HALL", "Alice Hall");
    }


    if (iFRAME)
    {
        //=================== FRAME parameters ============================

        AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
    }

    if (iSHIL)
    {
        //=================== SHIL parameters ============================

        AliSHIL *SHIL = new AliSHILv2("SHIL", "Shielding Version 2");
    }


    if (iPIPE)
    {
        //=================== PIPE parameters ============================

        AliPIPE *PIPE = new AliPIPEv0("PIPE", "Beam Pipe");
    }
 
    if(iITS) 
    {
      //=================== ITS parameters ============================
      //
      // As the innermost detector in ALICE, the Inner Tracking System "impacts" on
      // almost all other detectors. This involves the fact that the ITS geometry
      // still has several options to be followed in parallel in order to determine
      // the best set-up which minimizes the induced background. All the geometries
      // available to date are described in the following. Read carefully the comments
      // and use the default version (the only one uncommented) unless you are making
      // comparisons and you know what you are doing. In this case just uncomment the
      // ITS geometry you want to use and run Aliroot.
      //
      // Detailed geometries:         
      //
      //
      //
/*
	AliITSvPPRasymmFMD *ITS  = new AliITSvPPRasymmFMD("ITS","ITS PPR detailed version with asymmetric services");
	ITS->SetMinorVersion(2);  // don't touch this parameter if you're not an ITS developer
	ITS->SetReadDet(kTRUE);	  // don't touch this parameter if you're not an ITS developer
	//    ITS->SetWriteDet("$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det");  // don't touch this parameter if you're not an ITS developer
	ITS->SetThicknessDet1(200.);   // detector thickness on layer 1 must be in the range [100,300]
	ITS->SetThicknessDet2(200.);   // detector thickness on layer 2 must be in the range [100,300]
	ITS->SetThicknessChip1(200.);  // chip thickness on layer 1 must be in the range [150,300]
	ITS->SetThicknessChip2(200.);  // chip thickness on layer 2 must be in the range [150,300]
	ITS->SetRails(0);	       // 1 --> rails in ; 0 --> rails out
	ITS->SetCoolingFluid(1);       // 1 --> water ; 0 --> freon
*/
      //
      // Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful 
      // for reconstruction !):
      //                                                       
      //
      AliITSvPPRcoarseasymm *ITS  = new AliITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
      ITS->SetRails(0);                // 1 --> rails in ; 0 --> rails out
      ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
      //
      //AliITS *ITS  = new AliITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
      //ITS->SetRails(0);                // 1 --> rails in ; 0 --> rails out
      //ITS->SetSupportMaterial(0);      // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
      //                      
      //
      //
      // Geant3 <-> EUCLID conversion
      // ============================
      //
      // SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
      // media to two ASCII files (called by default ITSgeometry.euc and
      // ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
      // The default (=0) means that you dont want to use this facility.
      //
      ITS->SetEUCLID(0);  
    }  

    if (iTPC)
    {
        //============================ TPC parameters ===================
        AliTPC *TPC = new AliTPCv2("TPC", "Default");
    }

    if (iTOF)
    {
        //=================== TOF parameters ============================
	AliTOF *TOF = new AliTOFv5T0("TOF", "normal TOF");
    }

    if (iRICH)
    {
        //=================== RICH parameters ===========================
        AliRICH *RICH = new AliRICHv1("RICH", "normal RICH");
    }


    if (iZDC)
    {
        //=================== ZDC parameters ============================

        AliZDC *ZDC = new AliZDCv2("ZDC", "normal ZDC");
    }

    if (iTRD)
    {
        //=================== TRD parameters ============================

        AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");

        // Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
        TRD->SetGasMix(1);
        // Switch on TR
        AliTRDsim *TRDsim = TRD->CreateTR();
    }

    if (iFMD)
    {
        //=================== FMD parameters ============================

        AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
    }

    if (iMUON)
    {
        //=================== MUON parameters ===========================

        AliMUON *MUON = new AliMUONv1("MUON", "default");
    }
    //=================== PHOS parameters ===========================

    if (iPHOS)
    {
        AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
    }


    if (iPMD)
    {
        //=================== PMD parameters ============================
        AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
    }

    if (iSTART)
    {
        //=================== START parameters ============================
        AliSTART *START = new AliSTARTv1("START", "START Detector");
    }

    if (iEMCAL)
    {
        //=================== EMCAL parameters ============================
        AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "SHISH_77_TRD1_2X2_FINAL_110DEG");
    }

    if (iCRT)
    {
        //=================== CRT parameters ============================

        AliCRT *CRT = new AliCRTv0("CRT", "normal ACORDE");
    }

    if (iVZERO)
    {
        //=================== CRT parameters ============================
        AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
    }

  } // end (!isSetInteractively)

  cout << "End of g4ConfigCommon.C" << endl;
}

Float_t EtaToTheta(Float_t arg){
  return (180./TMath::Pi())*2.*atan(exp(-arg));
}