]> git.uio.no Git - u/mrichter/AliRoot.git/blame_incremental - ZDC/AliZDCv1.cxx
git://git.uio.no / u / mrichter / AliRoot.git / blame_incremental
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (non-incremental) | history | HEAD
TDI in correct position and minor correction
[u/mrichter/AliRoot.git] / ZDC / AliZDCv1.cxx
... / ...
CommitLineData
1/**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3 * *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
6 * *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
15
16/*
17$Log$
18Revision 1.24 2001/05/16 14:57:28 alibrary
19New files for folders and Stack
20
21Revision 1.23 2001/05/14 09:51:50 coppedis
22Change in AddHit suggested by J. Chudoba
23
24Revision 1.22 2001/05/05 13:33:19 coppedis
25Changes in StepManager to speed simulation
26
27Revision 1.21 2001/05/02 11:54:34 enrico
28Minor change
29
30Revision 1.20 2001/05/02 10:33:11 coppedis
31Modify tmaxfd in media definition
32
33Revision 1.19 2001/04/27 08:35:01 coppedis
34Remove some lines for proton acceptance studies
35
36Revision 1.18 2001/04/20 10:08:45 coppedis
37Preliminary version of optics 6.2 - Insertion of TDI
38
39Revision 1.17 2001/03/16 16:18:10 coppedis
40Correction for superposition of ZDC volumes with MUON arm one
41
42Revision 1.16 2001/03/15 16:12:04 coppedis
43Code review
44
45Revision 1.15 2001/03/12 17:47:56 hristov
46Changes needed on Sun with CC 5.0
47
48Revision 1.14 2001/02/23 16:48:28 coppedis
49Correct bug in ZEM hit definition
50
51Revision 1.13 2001/02/07 18:07:41 coppedis
52Modif for splitting
53
54Revision 1.12 2001/01/26 19:56:27 hristov
55Major upgrade of AliRoot code
56
57Revision 1.11 2001/01/16 07:43:33 hristov
58Initialisation of ZDC hits
59
60Revision 1.10 2000/12/14 15:20:02 coppedis
61Hits2Digits method for digitization
62
63Revision 1.9 2000/12/13 10:33:49 coppedis
64Prints only if fDebug==1
65
66Revision 1.8 2000/12/12 14:10:02 coppedis
67Correction suggested by M. Masera
68
69Revision 1.7 2000/11/30 17:23:47 coppedis
70Remove first corrector dipole and introduce digitization
71
72Revision 1.6 2000/11/22 11:33:10 coppedis
73Major code revision
74
75Revision 1.5 2000/10/02 21:28:20 fca
76Removal of useless dependecies via forward declarations
77
78Revision 1.3.2.1 2000/08/24 09:25:47 hristov
79Patch by P.Hristov: Bug in ZDC geometry corrected by E.Scomparin
80
81Revision 1.4 2000/08/24 09:23:59 hristov
82Bug in ZDC geometry corrected by E.Scomparin
83
84Revision 1.3 2000/07/12 06:59:16 fca
85Fixing dimension of hits array
86
87Revision 1.2 2000/07/11 11:12:34 fca
88Some syntax corrections for non standard HP aCC
89
90Revision 1.1 2000/07/10 13:58:01 fca
91New version of ZDC from E.Scomparin & C.Oppedisano
92
93Revision 1.7 2000/01/19 17:17:40 fca
94
95Revision 1.6 1999/09/29 09:24:35 fca
96Introduction of the Copyright and cvs Log
97
98*/
99
100///////////////////////////////////////////////////////////////////////////////
101// //
102// Zero Degree Calorimeter //
103// This class contains the basic functions for the ZDC //
104// Functions specific to one particular geometry are //
105// contained in the derived classes //
106// //
107///////////////////////////////////////////////////////////////////////////////
108
109// --- Standard libraries
110#include "stdio.h"
111
112// --- ROOT system
113#include <TBRIK.h>
114#include <TNode.h>
115#include <TMath.h>
116#include <TRandom.h>
117#include <TSystem.h>
118#include <TTree.h>
119
120
121// --- AliRoot classes
122#include "AliZDCv1.h"
123#include "AliZDCHit.h"
124#include "AliZDCDigit.h"
125#include "AliRun.h"
126#include "AliDetector.h"
127#include "AliMagF.h"
128#include "AliMC.h"
129#include "AliCallf77.h"
130#include "AliConst.h"
131#include "AliPDG.h"
132#include "TLorentzVector.h"
133
134
135ClassImp(AliZDCv1)
136
137
138///////////////////////////////////////////////////////////////////////////////
139// //
140// Zero Degree Calorimeter version 1 //
141// //
142///////////////////////////////////////////////////////////////////////////////
143
144//_____________________________________________________________________________
145AliZDCv1::AliZDCv1() : AliZDC()
146{
147 //
148 // Default constructor for Zero Degree Calorimeter
149 //
150
151 fMedSensF1 = 0;
152 fMedSensF2 = 0;
153 fMedSensZN = 0;
154 fMedSensZP = 0;
155 fMedSensZEM = 0;
156 fMedSensGR = 0;
157// fMedSensPI = 0;
158// fMedSensTDI = 0;
159}
160
161//_____________________________________________________________________________
162AliZDCv1::AliZDCv1(const char *name, const char *title)
163 : AliZDC(name,title)
164{
165 //
166 // Standard constructor for Zero Degree Calorimeter
167 //
168 //
169 // Check that DIPO, ABSO, DIPO and SHIL is there (otherwise tracking is wrong!!!)
170
171 AliModule* PIPE=gAlice->GetModule("PIPE");
172 AliModule* ABSO=gAlice->GetModule("ABSO");
173 AliModule* DIPO=gAlice->GetModule("DIPO");
174 AliModule* SHIL=gAlice->GetModule("SHIL");
175 if((!PIPE) || (!ABSO) || (!DIPO) || (!SHIL)) {
176 Error("Constructor","ZDC needs PIPE, ABSO, DIPO and SHIL!!!\n");
177 exit(1);
178 }
179
180 fMedSensF1 = 0;
181 fMedSensF2 = 0;
182 fMedSensZN = 0;
183 fMedSensZP = 0;
184 fMedSensZEM = 0;
185 fMedSensGR = 0;
186// fMedSensPI = 0;
187// fMedSensTDI = 0;
188
189
190 // Parameters for light tables
191 fNalfan = 90; // Number of Alfa (neutrons)
192 fNalfap = 90; // Number of Alfa (protons)
193 fNben = 18; // Number of beta (neutrons)
194 fNbep = 28; // Number of beta (protons)
195 Int_t ip,jp,kp;
196 for(ip=0; ip<4; ip++){
197 for(kp=0; kp<fNalfap; kp++){
198 for(jp=0; jp<fNbep; jp++){
199 fTablep[ip][kp][jp] = 0;
200 }
201 }
202 }
203 Int_t in,jn,kn;
204 for(in=0; in<4; in++){
205 for(kn=0; kn<fNalfan; kn++){
206 for(jn=0; jn<fNben; jn++){
207 fTablen[in][kn][jn] = 0;
208 }
209 }
210 }
211
212 // Parameters for hadronic calorimeters geometry
213 fDimZP[0] = 11.2;
214 fDimZP[1] = 6.;
215 fDimZP[2] = 75.;
216 fPosZN[0] = 0.;
217 fPosZN[1] = -1.2;
218 fPosZN[2] = 11650.;
219 fPosZP[0] = -24.;
220 fPosZP[1] = 0.;
221 fPosZP[2] = 11600.;
222 fFibZN[0] = 0.;
223 fFibZN[1] = 0.01825;
224 fFibZN[2] = 50.;
225 fFibZP[0] = 0.;
226 fFibZP[1] = 0.0275;
227 fFibZP[2] = 75.;
228
229 // Parameters for EM calorimeter geometry
230 fPosZEM[0] = 0.;
231 fPosZEM[1] = 5.8;
232 fPosZEM[2] = 11600.;
233
234
235 fDigits = new TClonesArray("AliZDCDigit",1000);
236}
237
238//_____________________________________________________________________________
239void AliZDCv1::CreateGeometry()
240{
241 //
242 // Create the geometry for the Zero Degree Calorimeter version 1
243 //* Initialize COMMON block ZDC_CGEOM
244 //*
245
246 CreateBeamLine();
247 CreateZDC();
248}
249
250//_____________________________________________________________________________
251void AliZDCv1::CreateBeamLine()
252{
253
254 Float_t zq, zd1, zd2;
255 Float_t conpar[9], tubpar[3], tubspar[5], boxpar[3];
256 Int_t im1, im2;
257
258 Int_t *idtmed = fIdtmed->GetArray();
259
260 // -- Mother of the ZDCs (Vacuum PCON)
261
262 conpar[0] = 0.;
263 conpar[1] = 360.;
264 conpar[2] = 2.;
265 conpar[3] = 2000.;
266 conpar[4] = 0.;
267 conpar[5] = 55.;
268 conpar[6] = 13060.;
269 conpar[7] = 0.;
270 conpar[8] = 55.;
271 gMC->Gsvolu("ZDC ", "PCON", idtmed[11], conpar, 9);
272 gMC->Gspos("ZDC ", 1, "ALIC", 0., 0., 0., 0, "ONLY");
273
274 // -- FIRST SECTION OF THE BEAM PIPE (from compensator dipole to
275 // the beginning of D1)
276
277 zd1 = 2000.;
278
279 tubpar[0] = 6.3/2.;
280 tubpar[1] = 6.7/2.;
281 tubpar[2] = 3838.3/2.;
282 gMC->Gsvolu("QT01", "TUBE", idtmed[7], tubpar, 3);
283 gMC->Gspos("QT01", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
284
285 //-- SECOND SECTION OF THE BEAM PIPE (from the end of D1 to the
286 // beginning of D2)
287
288 //-- FROM MAGNETIC BEGINNING OF D1 TO MAGNETIC END OF D1 + 13.5 cm
289 //-- Cylindrical pipe (r = 3.47) + conical flare
290
291 // -> Beginning of D1
292 zd1 += 2.*tubpar[2];
293
294 tubpar[0] = 3.47;
295 tubpar[1] = 3.47+0.2;
296 tubpar[2] = 958.5/2.;
297 gMC->Gsvolu("QT02", "TUBE", idtmed[7], tubpar, 3);
298 gMC->Gspos("QT02", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
299
300 zd1 += 2.*tubpar[2];
301
302 conpar[0] = 25./2.;
303 conpar[1] = 6.44/2.;
304 conpar[2] = 6.84/2.;
305 conpar[3] = 10./2.;
306 conpar[4] = 10.4/2.;
307 gMC->Gsvolu("QC01", "CONE", idtmed[7], conpar, 5);
308 gMC->Gspos("QC01", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
309
310 zd1 += 2.*conpar[0];
311
312 tubpar[0] = 10./2.;
313 tubpar[1] = 10.4/2.;
314 tubpar[2] = 50./2.;
315 gMC->Gsvolu("QT03", "TUBE", idtmed[7], tubpar, 3);
316 gMC->Gspos("QT03", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
317
318 zd1 += tubpar[2]*2.;
319
320 tubpar[0] = 10./2.;
321 tubpar[1] = 10.4/2.;
322 tubpar[2] = 10./2.;
323 gMC->Gsvolu("QT04", "TUBE", idtmed[7], tubpar, 3);
324 gMC->Gspos("QT04", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
325
326 zd1 += tubpar[2] * 2.;
327
328 tubpar[0] = 10./2.;
329 tubpar[1] = 10.4/2.;
330 tubpar[2] = 3.16/2.;
331 gMC->Gsvolu("QT05", "TUBE", idtmed[7], tubpar, 3);
332 gMC->Gspos("QT05", 1, "ZDC ", 0., 0., tubpar[0] + zd1, 0, "ONLY");
333
334 zd1 += tubpar[2] * 2.;
335
336 tubpar[0] = 10.0/2.;
337 tubpar[1] = 10.4/2;
338 tubpar[2] = 190./2.;
339 gMC->Gsvolu("QT06", "TUBE", idtmed[7], tubpar, 3);
340 gMC->Gspos("QT06", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
341
342 zd1 += tubpar[2] * 2.;
343
344 conpar[0] = 30./2.;
345 conpar[1] = 10./2.;
346 conpar[2] = 10.4/2.;
347 conpar[3] = 20.6/2.;
348 conpar[4] = 21./2.;
349 gMC->Gsvolu("QC02", "CONE", idtmed[7], conpar, 5);
350 gMC->Gspos("QC02", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
351
352 zd1 += conpar[0] * 2.;
353
354 tubpar[0] = 20.6/2.;
355 tubpar[1] = 21./2.;
356 tubpar[2] = 450./2.;
357 gMC->Gsvolu("QT07", "TUBE", idtmed[7], tubpar, 3);
358 gMC->Gspos("QT07", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
359
360 zd1 += tubpar[2] * 2.;
361
362 conpar[0] = 13.6/2.;
363 conpar[1] = 20.6/2.;
364 conpar[2] = 21./2.;
365 conpar[3] = 25.4/2.;
366 conpar[4] = 25.8/2.;
367 gMC->Gsvolu("QC03", "CONE", idtmed[7], conpar, 5);
368 gMC->Gspos("QC03", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
369
370 zd1 += conpar[0] * 2.;
371
372 tubpar[0] = 25.4/2.;
373 tubpar[1] = 25.8/2.;
374 tubpar[2] = 205.8/2.;
375 gMC->Gsvolu("QT08", "TUBE", idtmed[7], tubpar, 3);
376 gMC->Gspos("QT08", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
377
378 zd1 += tubpar[2] * 2.;
379
380 tubpar[0] = 50./2.;
381 tubpar[1] = 50.4/2.;
382 // QT09 is 10 cm longer to accomodate TDI
383 tubpar[2] = 515.4/2.;
384 gMC->Gsvolu("QT09", "TUBE", idtmed[7], tubpar, 3);
385 gMC->Gspos("QT09", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
386
387
388 // --- Insert TDI (inside ZDC volume)
389
390 boxpar[0] = 5.6;
391 boxpar[1] = 5.6;
392 boxpar[2] = 400./2.;
393 gMC->Gsvolu("QTD1", "BOX ", idtmed[7], boxpar, 3);
394 gMC->Gspos("QTD1", 1, "ZDC ", 3., 10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY");
395 gMC->Gspos("QTD1", 2, "ZDC ", 3., -10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY");
396
397 boxpar[0] = 0.2/2.;
398 boxpar[1] = 5.6;
399 boxpar[2] = 400./2.;
400 gMC->Gsvolu("QTD2", "BOX ", idtmed[6], boxpar, 3);
401 gMC->Gspos("QTD2", 1, "ZDC ", 8.6+boxpar[0], 0., tubpar[2] + zd1 + 56.3, 0, "ONLY");
402
403 tubspar[0] = 6.2; // R = 6.2 cm----------------------------------------
404 tubspar[1] = 6.4;
405 tubspar[2] = 400./2.;
406 tubspar[3] = 180.-62.5;
407 tubspar[4] = 180.+62.5;
408// tubspar[0] = 10.5; // R = 10.5 cm------------------------------------------
409// tubspar[1] = 10.7;
410// tubspar[2] = 400./2.;
411// tubspar[3] = 180.-75.5;
412// tubspar[4] = 180.+75.5;
413 gMC->Gsvolu("QTD3", "TUBS", idtmed[6], tubspar, 5);
414 gMC->Gspos("QTD3", 1, "ZDC ", 0., 0., tubpar[2] + zd1 + 56.3, 0, "ONLY");
415
416 zd1 += tubpar[2] * 2.;
417
418 tubpar[0] = 50./2.;
419 tubpar[1] = 50.4/2.;
420 // QT10 is 10 cm shorter
421 tubpar[2] = 690./2.;
422 gMC->Gsvolu("QT10", "TUBE", idtmed[7], tubpar, 3);
423 gMC->Gspos("QT10", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
424
425 zd1 += tubpar[2] * 2.;
426
427 tubpar[0] = 50./2.;
428 tubpar[1] = 50.4/2.;
429 tubpar[2] = 778.5/2.;
430 gMC->Gsvolu("QT11", "TUBE", idtmed[7], tubpar, 3);
431 gMC->Gspos("QT11", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
432
433 zd1 += tubpar[2] * 2.;
434
435 conpar[0] = 14.18/2.;
436 conpar[1] = 50./2.;
437 conpar[2] = 50.4/2.;
438 conpar[3] = 55./2.;
439 conpar[4] = 55.4/2.;
440 gMC->Gsvolu("QC04", "CONE", idtmed[7], conpar, 5);
441 gMC->Gspos("QC04", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
442
443 zd1 += conpar[0] * 2.;
444
445 tubpar[0] = 55./2.;
446 tubpar[1] = 55.4/2.;
447 tubpar[2] = 730./2.;
448 gMC->Gsvolu("QT12", "TUBE", idtmed[7], tubpar, 3);
449 gMC->Gspos("QT12", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
450
451 zd1 += tubpar[2] * 2.;
452
453 conpar[0] = 36.86/2.;
454 conpar[1] = 55./2.;
455 conpar[2] = 55.4/2.;
456 conpar[3] = 68./2.;
457 conpar[4] = 68.4/2.;
458 gMC->Gsvolu("QC05", "CONE", idtmed[7], conpar, 5);
459 gMC->Gspos("QC05", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY");
460
461 zd1 += conpar[0] * 2.;
462
463 tubpar[0] = 68./2.;
464 tubpar[1] = 68.4/2.;
465 tubpar[2] = 927.3/2.;
466 gMC->Gsvolu("QT13", "TUBE", idtmed[7], tubpar, 3);
467 gMC->Gspos("QT13", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
468
469 zd1 += tubpar[2] * 2.;
470
471 tubpar[0] = 0./2.;
472 tubpar[1] = 68.4/2.;
473 tubpar[2] = 0.2/2.;
474 gMC->Gsvolu("QT14", "TUBE", idtmed[8], tubpar, 3);
475 gMC->Gspos("QT14", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
476
477 zd1 += tubpar[2] * 2.;
478
479 tubpar[0] = 0./2.;
480 tubpar[1] = 6.4/2.;
481 tubpar[2] = 0.2/2.;
482 gMC->Gsvolu("QT15", "TUBE", idtmed[11], tubpar, 3);
483
484 //-- Position QT15 inside QT14
485 gMC->Gspos("QT15", 1, "QT14", -7.7, 0., 0., 0, "ONLY");
486
487 tubpar[0] = 0./2.;
488 tubpar[1] = 6.4/2.;
489 tubpar[2] = 0.2/2.;
490 gMC->Gsvolu("QT16", "TUBE", idtmed[11], tubpar, 3);
491
492 //-- Position QT16 inside QT14
493 gMC->Gspos("QT16", 1, "QT14", 7.7, 0., 0., 0, "ONLY");
494
495
496 //-- BEAM PIPE BETWEEN END OF CONICAL PIPE AND BEGINNING OF D2
497
498 tubpar[0] = 6.4/2.;
499 tubpar[1] = 6.8/2.;
500 tubpar[2] = 680.8/2.;
501 gMC->Gsvolu("QT17", "TUBE", idtmed[7], tubpar, 3);
502
503 tubpar[0] = 6.4/2.;
504 tubpar[1] = 6.8/2.;
505 tubpar[2] = 680.8/2.;
506 gMC->Gsvolu("QT18", "TUBE", idtmed[7], tubpar, 3);
507
508 // -- ROTATE PIPES
509
510 Float_t angle = 0.143*kDegrad;
511
512 AliMatrix(im1, 90.-0.143, 0., 90., 90., 0.143, 180.);
513 gMC->Gspos("QT17", 1, "ZDC ", TMath::Sin(angle) * 680.8/ 2. - 9.4,
514 0., tubpar[2] + zd1, im1, "ONLY");
515
516 AliMatrix(im2, 90.+0.143, 0., 90., 90., 0.143, 0.);
517 gMC->Gspos("QT18", 1, "ZDC ", 9.7 - TMath::Sin(angle) * 680.8 / 2.,
518 0., tubpar[2] + zd1, im2, "ONLY");
519
520
521 // -- END OF BEAM PIPE VOLUME DEFINITION.
522 // ----------------------------------------------------------------
523
524 // -- MAGNET DEFINITION -> LHC OPTICS 6.2 (preliminary version)
525
526 // ----------------------------------------------------------------
527 // Replaced by the muon dipole
528 // ----------------------------------------------------------------
529 // -- COMPENSATOR DIPOLE (MBXW)
530 // GAP (VACUUM WITH MAGNETIC FIELD)
531
532// tubpar[0] = 0.;
533// tubpar[1] = 4.5;
534// tubpar[2] = 340./2.;
535// gMC->Gsvolu("MBXW", "TUBE", idtmed[11], tubpar, 3);
536// gMC->Gspos("MBXW", 1, "ZDC ", 0., 0., tubpar[2] + 805., 0, "ONLY");
537
538 // -- YOKE (IRON WITHOUT MAGNETIC FIELD)
539
540// tubpar[0] = 4.5;
541// tubpar[1] = 55.;
542// tubpar[2] = 340./2.;
543// gMC->Gsvolu("YMBX", "TUBE", idtmed[7], tubpar, 3);
544// gMC->Gspos("YMBX", 1, "ZDC ", 0., 0., tubpar[2] + 805., 0, "ONLY");
545
546 // ----------------------------------------------------------------
547 // Replaced by the second dipole
548 // ----------------------------------------------------------------
549 // -- COMPENSATOR DIPOLE (MCBWA)
550 // GAP (VACUUM WITH MAGNETIC FIELD)
551
552// tubpar[0] = 0.;
553// tubpar[1] = 4.5;
554// tubpar[2] = 170./2.;
555// gMC->Gsvolu("MCBW", "TUBE", idtmed[11], tubpar, 3);
556// gMC->Gspos("MCBW", 1, "ZDC ", 0., 0., tubpar[2] + 1921.6, 0, "ONLY");
557
558 // -- YOKE (IRON WITHOUT MAGNETIC FIELD)
559
560// tubpar[0] = 4.5;
561// tubpar[1] = 55.;
562// tubpar[2] = 170./2.;
563// gMC->Gsvolu("YMCB", "TUBE", idtmed[7], tubpar, 3);
564// gMC->Gspos("YMCB", 1, "ZDC ", 0., 0., tubpar[2] + 1921.6, 0, "ONLY");
565
566 // -- INNER TRIPLET
567
568 zq = 2296.5;
569
570 // -- DEFINE MQXL AND MQX QUADRUPOLE ELEMENT
571
572 // MQXL
573 // -- GAP (VACUUM WITH MAGNETIC FIELD)
574
575 tubpar[0] = 0.;
576 tubpar[1] = 3.5;
577 tubpar[2] = 637./2.;
578 gMC->Gsvolu("MQXL", "TUBE", idtmed[11], tubpar, 3);
579
580 // -- YOKE
581
582 tubpar[0] = 3.5;
583 tubpar[1] = 22.;
584 tubpar[2] = 637./2.;
585 gMC->Gsvolu("YMQL", "TUBE", idtmed[7], tubpar, 3);
586
587 gMC->Gspos("MQXL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY");
588 gMC->Gspos("YMQL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY");
589
590 gMC->Gspos("MQXL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY");
591 gMC->Gspos("YMQL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY");
592
593 // -- MQX
594 // -- GAP (VACUUM WITH MAGNETIC FIELD)
595
596 tubpar[0] = 0.;
597 tubpar[1] = 3.5;
598 tubpar[2] = 550./2.;
599 gMC->Gsvolu("MQX ", "TUBE", idtmed[11], tubpar, 3);
600
601 // -- YOKE
602
603 tubpar[0] = 3.5;
604 tubpar[1] = 22.;
605 tubpar[2] = 550./2.;
606 gMC->Gsvolu("YMQ ", "TUBE", idtmed[7], tubpar, 3);
607
608 gMC->Gspos("MQX ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 883.5, 0, "ONLY");
609 gMC->Gspos("YMQ ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 883.5, 0, "ONLY");
610
611 gMC->Gspos("MQX ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1533.5, 0, "ONLY");
612 gMC->Gspos("YMQ ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1533.5, 0, "ONLY");
613
614 // -- SEPARATOR DIPOLE D1
615
616 zd1 = 5838.3;
617
618 // -- GAP (VACUUM WITH MAGNETIC FIELD)
619
620 tubpar[0] = 0.;
621 tubpar[1] = 6.94/2.;
622 tubpar[2] = 945./2.;
623 gMC->Gsvolu("MD1 ", "TUBE", idtmed[11], tubpar, 3);
624
625 // -- Insert horizontal Cu plates inside D1
626 // -- (to simulate the vacuum chamber)
627
628 boxpar[0] = TMath::Sqrt(tubpar[1]*tubpar[1]-(2.98+0.2)*(2.98+0.2));
629 boxpar[1] = 0.2/2.;
630 boxpar[2] =945./2.;
631 gMC->Gsvolu("MD1V", "BOX ", idtmed[6], boxpar, 3);
632 gMC->Gspos("MD1V", 1, "MD1 ", 0., 2.98+boxpar[1], 0., 0, "ONLY");
633 gMC->Gspos("MD1V", 2, "MD1 ", 0., -2.98-boxpar[1], 0., 0, "ONLY");
634
635 // -- YOKE
636
637 tubpar[0] = 0.;
638 tubpar[1] = 110./2;
639 tubpar[2] = 945./2.;
640 gMC->Gsvolu("YD1 ", "TUBE", idtmed[7], tubpar, 3);
641
642 gMC->Gspos("YD1 ", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY");
643 gMC->Gspos("MD1 ", 1, "YD1 ", 0., 0., 0., 0, "ONLY");
644
645 // -- DIPOLE D2
646
647 zd2 = 12147.6;
648
649 // -- GAP (VACUUM WITH MAGNETIC FIELD)
650
651 tubpar[0] = 0.;
652 tubpar[1] = 7.5/2.;
653 tubpar[2] = 945./2.;
654 gMC->Gsvolu("MD2 ", "TUBE", idtmed[11], tubpar, 3);
655
656 // -- YOKE
657
658 tubpar[0] = 0.;
659 tubpar[1] = 55.;
660 tubpar[2] = 945./2.;
661 gMC->Gsvolu("YD2 ", "TUBE", idtmed[7], tubpar, 3);
662
663 gMC->Gspos("YD2 ", 1, "ZDC ", 0., 0., tubpar[2] + zd2, 0, "ONLY");
664
665 gMC->Gspos("MD2 ", 1, "YD2 ", -9.4, 0., 0., 0, "ONLY");
666 gMC->Gspos("MD2 ", 2, "YD2 ", 9.4, 0., 0., 0, "ONLY");
667
668 // -- END OF MAGNET DEFINITION
669}
670
671//_____________________________________________________________________________
672void AliZDCv1::CreateZDC()
673{
674
675 Float_t DimPb[6], DimVoid[6];
676
677 Int_t *idtmed = fIdtmed->GetArray();
678
679 // Parameters for hadronic calorimeters geometry
680 // NB -> parameters used ONLY in CreateZDC()
681 Float_t fDimZN[3] = {3.52, 3.52, 50.}; // Dimensions of neutron detector
682 Float_t fGrvZN[3] = {0.03, 0.03, 50.}; // Grooves for neutron detector
683 Float_t fGrvZP[3] = {0.04, 0.04, 75.}; // Grooves for proton detector
684 Int_t fDivZN[3] = {11, 11, 0}; // Division for neutron detector
685 Int_t fDivZP[3] = {7, 15, 0}; // Division for proton detector
686 Int_t fTowZN[2] = {2, 2}; // Tower for neutron detector
687 Int_t fTowZP[2] = {4, 1}; // Tower for proton detector
688
689 // Parameters for EM calorimeter geometry
690 // NB -> parameters used ONLY in CreateZDC()
691 Float_t fDimZEMPb = 0.15*(TMath::Sqrt(2.)); // z-dimension of the Pb slice
692 Float_t fDimZEMAir = 0.001; // scotch
693 Float_t fFibRadZEM = 0.0315; // External fiber radius (including cladding)
694 Int_t fDivZEM[3] = {92, 0, 20}; // Divisions for EM detector
695 Float_t fDimZEM0 = 2*fDivZEM[2]*(fDimZEMPb+fDimZEMAir+fFibRadZEM*(TMath::Sqrt(2.)));
696 Float_t fDimZEM[6] = {fDimZEM0, 3.5, 3.5, 45., 0., 0.}; // Dimensions of EM detector
697 Float_t fFibZEM2 = fDimZEM[2]/TMath::Sin(fDimZEM[3]*kDegrad)-fFibRadZEM;
698 Float_t fFibZEM[3] = {0., 0.0275, fFibZEM2}; // Fibers for EM calorimeter
699
700
701 //-- Create calorimeters geometry
702
703 // -------------------------------------------------------------------------------
704 //--> Neutron calorimeter (ZN)
705
706 gMC->Gsvolu("ZNEU", "BOX ", idtmed[1], fDimZN, 3); // Passive material
707 gMC->Gsvolu("ZNF1", "TUBE", idtmed[3], fFibZN, 3); // Active material
708 gMC->Gsvolu("ZNF2", "TUBE", idtmed[4], fFibZN, 3);
709 gMC->Gsvolu("ZNF3", "TUBE", idtmed[4], fFibZN, 3);
710 gMC->Gsvolu("ZNF4", "TUBE", idtmed[3], fFibZN, 3);
711 gMC->Gsvolu("ZNG1", "BOX ", idtmed[12], fGrvZN, 3); // Empty grooves
712 gMC->Gsvolu("ZNG2", "BOX ", idtmed[12], fGrvZN, 3);
713 gMC->Gsvolu("ZNG3", "BOX ", idtmed[12], fGrvZN, 3);
714 gMC->Gsvolu("ZNG4", "BOX ", idtmed[12], fGrvZN, 3);
715
716 // Divide ZNEU in towers (for hits purposes)
717
718 gMC->Gsdvn("ZNTX", "ZNEU", fTowZN[0], 1); // x-tower
719 gMC->Gsdvn("ZN1 ", "ZNTX", fTowZN[1], 2); // y-tower
720
721 //-- Divide ZN1 in minitowers
722 // fDivZN[0]= NUMBER OF FIBERS PER TOWER ALONG X-AXIS,
723 // fDivZN[1]= NUMBER OF FIBERS PER TOWER ALONG Y-AXIS
724 // (4 fibres per minitower)
725
726 gMC->Gsdvn("ZNSL", "ZN1 ", fDivZN[1], 2); // Slices
727 gMC->Gsdvn("ZNST", "ZNSL", fDivZN[0], 1); // Sticks
728
729 // --- Position the empty grooves in the sticks (4 grooves per stick)
730 Float_t dx = fDimZN[0] / fDivZN[0] / 4.;
731 Float_t dy = fDimZN[1] / fDivZN[1] / 4.;
732
733 gMC->Gspos("ZNG1", 1, "ZNST", 0.-dx, 0.+dy, 0., 0, "ONLY");
734 gMC->Gspos("ZNG2", 1, "ZNST", 0.+dx, 0.+dy, 0., 0, "ONLY");
735 gMC->Gspos("ZNG3", 1, "ZNST", 0.-dx, 0.-dy, 0., 0, "ONLY");
736 gMC->Gspos("ZNG4", 1, "ZNST", 0.+dx, 0.-dy, 0., 0, "ONLY");
737
738 // --- Position the fibers in the grooves
739 gMC->Gspos("ZNF1", 1, "ZNG1", 0., 0., 0., 0, "ONLY");
740 gMC->Gspos("ZNF2", 1, "ZNG2", 0., 0., 0., 0, "ONLY");
741 gMC->Gspos("ZNF3", 1, "ZNG3", 0., 0., 0., 0, "ONLY");
742 gMC->Gspos("ZNF4", 1, "ZNG4", 0., 0., 0., 0, "ONLY");
743
744 // --- Position the neutron calorimeter in ZDC
745 gMC->Gspos("ZNEU", 1, "ZDC ", fPosZN[0], fPosZN[1], fPosZN[2] + fDimZN[2], 0, "ONLY");
746
747
748 // -------------------------------------------------------------------------------
749 //--> Proton calorimeter (ZP)
750
751 gMC->Gsvolu("ZPRO", "BOX ", idtmed[2], fDimZP, 3); // Passive material
752 gMC->Gsvolu("ZPF1", "TUBE", idtmed[3], fFibZP, 3); // Active material
753 gMC->Gsvolu("ZPF2", "TUBE", idtmed[4], fFibZP, 3);
754 gMC->Gsvolu("ZPF3", "TUBE", idtmed[4], fFibZP, 3);
755 gMC->Gsvolu("ZPF4", "TUBE", idtmed[3], fFibZP, 3);
756 gMC->Gsvolu("ZPG1", "BOX ", idtmed[12], fGrvZP, 3); // Empty grooves
757 gMC->Gsvolu("ZPG2", "BOX ", idtmed[12], fGrvZP, 3);
758 gMC->Gsvolu("ZPG3", "BOX ", idtmed[12], fGrvZP, 3);
759 gMC->Gsvolu("ZPG4", "BOX ", idtmed[12], fGrvZP, 3);
760
761 //-- Divide ZPRO in towers(for hits purposes)
762
763 gMC->Gsdvn("ZPTX", "ZPRO", fTowZP[0], 1); // x-tower
764 gMC->Gsdvn("ZP1 ", "ZPTX", fTowZP[1], 2); // y-tower
765
766
767 //-- Divide ZP1 in minitowers
768 // fDivZP[0]= NUMBER OF FIBERS ALONG X-AXIS PER MINITOWER,
769 // fDivZP[1]= NUMBER OF FIBERS ALONG Y-AXIS PER MINITOWER
770 // (4 fiber per minitower)
771
772 gMC->Gsdvn("ZPSL", "ZP1 ", fDivZP[1], 2); // Slices
773 gMC->Gsdvn("ZPST", "ZPSL", fDivZP[0], 1); // Sticks
774
775 // --- Position the empty grooves in the sticks (4 grooves per stick)
776 dx = fDimZP[0] / fTowZP[0] / fDivZP[0] / 2.;
777 dy = fDimZP[1] / fTowZP[1] / fDivZP[1] / 2.;
778
779 gMC->Gspos("ZPG1", 1, "ZPST", 0.-dx, 0.+dy, 0., 0, "ONLY");
780 gMC->Gspos("ZPG2", 1, "ZPST", 0.+dx, 0.+dy, 0., 0, "ONLY");
781 gMC->Gspos("ZPG3", 1, "ZPST", 0.-dx, 0.-dy, 0., 0, "ONLY");
782 gMC->Gspos("ZPG4", 1, "ZPST", 0.+dx, 0.-dy, 0., 0, "ONLY");
783
784 // --- Position the fibers in the grooves
785 gMC->Gspos("ZPF1", 1, "ZPG1", 0., 0., 0., 0, "ONLY");
786 gMC->Gspos("ZPF2", 1, "ZPG2", 0., 0., 0., 0, "ONLY");
787 gMC->Gspos("ZPF3", 1, "ZPG3", 0., 0., 0., 0, "ONLY");
788 gMC->Gspos("ZPF4", 1, "ZPG4", 0., 0., 0., 0, "ONLY");
789
790
791 // --- Position the proton calorimeter in ZDC
792 gMC->Gspos("ZPRO", 1, "ZDC ", fPosZP[0], fPosZP[1], fPosZP[2] + fDimZP[2], 0, "ONLY");
793
794
795 // -------------------------------------------------------------------------------
796 // -> EM calorimeter (ZEM)
797
798 gMC->Gsvolu("ZEM ", "PARA", idtmed[10], fDimZEM, 6);
799
800 Int_t irot1, irot2;
801
802 gMC->Matrix(irot1,0.,0.,90.,90.,90.,180.); // Rotation matrix 1
803 gMC->Matrix(irot2,180.,0.,90.,fDimZEM[3]+90.,90.,fDimZEM[3]); // Rotation matrix 2
804// printf("irot1 = %d, irot2 = %d \n", irot1, irot2);
805
806 gMC->Gsvolu("ZEMF", "TUBE", idtmed[3], fFibZEM, 3); // Active material
807
808 gMC->Gsdvn("ZETR", "ZEM ", fDivZEM[2], 1); // Tranches
809
810 DimPb[0] = fDimZEMPb; // Lead slices
811 DimPb[1] = fDimZEM[2];
812 DimPb[2] = fDimZEM[1];
813 DimPb[3] = 90.-fDimZEM[3];
814 DimPb[4] = 0.;
815 DimPb[5] = 0.;
816 gMC->Gsvolu("ZEL0", "PARA", idtmed[5], DimPb, 6);
817 gMC->Gsvolu("ZEL1", "PARA", idtmed[5], DimPb, 6);
818 gMC->Gsvolu("ZEL2", "PARA", idtmed[5], DimPb, 6);
819
820 // --- Position the lead slices in the tranche
821 Float_t zTran = fDimZEM[0]/fDivZEM[2];
822 Float_t zTrPb = -zTran+fDimZEMPb;
823 gMC->Gspos("ZEL0", 1, "ZETR", zTrPb, 0., 0., 0, "ONLY");
824 gMC->Gspos("ZEL1", 1, "ZETR", fDimZEMPb, 0., 0., 0, "ONLY");
825
826 // --- Vacuum zone (to be filled with fibres)
827 DimVoid[0] = (zTran-2*fDimZEMPb)/2.;
828 DimVoid[1] = fDimZEM[2];
829 DimVoid[2] = fDimZEM[1];
830 DimVoid[3] = 90.-fDimZEM[3];
831 DimVoid[4] = 0.;
832 DimVoid[5] = 0.;
833 gMC->Gsvolu("ZEV0", "PARA", idtmed[10], DimVoid,6);
834 gMC->Gsvolu("ZEV1", "PARA", idtmed[10], DimVoid,6);
835
836 // --- Divide the vacuum slice into sticks along x axis
837 gMC->Gsdvn("ZES0", "ZEV0", fDivZEM[0], 3);
838 gMC->Gsdvn("ZES1", "ZEV1", fDivZEM[0], 3);
839
840 // --- Positioning the fibers into the sticks
841 gMC->Gspos("ZEMF", 1,"ZES0", 0., 0., 0., irot2, "ONLY");
842 gMC->Gspos("ZEMF", 1,"ZES1", 0., 0., 0., irot2, "ONLY");
843
844 // --- Positioning the vacuum slice into the tranche
845 Float_t DisplFib = fDimZEM[1]/fDivZEM[0];
846 gMC->Gspos("ZEV0", 1,"ZETR", -DimVoid[0], 0., 0., 0, "ONLY");
847 gMC->Gspos("ZEV1", 1,"ZETR", -DimVoid[0]+zTran, 0., DisplFib, 0, "ONLY");
848
849 // --- Positioning the ZEM into the ZDC - rotation for 90 degrees
850 gMC->Gspos("ZEM ", 1,"ZDC ", fPosZEM[0], fPosZEM[1], fPosZEM[2], irot1, "ONLY");
851
852 // --- Adding last slice at the end of the EM calorimeter
853 Float_t zLastSlice = fPosZEM[2]+fDimZEMPb+fDimZEM[0];
854 gMC->Gspos("ZEL2", 1,"ZDC ", fPosZEM[0], fPosZEM[1], zLastSlice, irot1, "ONLY");
855
856}
857
858//_____________________________________________________________________________
859void AliZDCv1::DrawModule()
860{
861 //
862 // Draw a shaded view of the Zero Degree Calorimeter version 1
863 //
864
865 // Set everything unseen
866 gMC->Gsatt("*", "seen", -1);
867 //
868 // Set ALIC mother transparent
869 gMC->Gsatt("ALIC","SEEN",0);
870 //
871 // Set the volumes visible
872 gMC->Gsatt("ZDC ","SEEN",0);
873 gMC->Gsatt("QT01","SEEN",1);
874 gMC->Gsatt("QT02","SEEN",1);
875 gMC->Gsatt("QT03","SEEN",1);
876 gMC->Gsatt("QT04","SEEN",1);
877 gMC->Gsatt("QT05","SEEN",1);
878 gMC->Gsatt("QT06","SEEN",1);
879 gMC->Gsatt("QT07","SEEN",1);
880 gMC->Gsatt("QT08","SEEN",1);
881 gMC->Gsatt("QT09","SEEN",1);
882 gMC->Gsatt("QT10","SEEN",1);
883 gMC->Gsatt("QT11","SEEN",1);
884 gMC->Gsatt("QT12","SEEN",1);
885 gMC->Gsatt("QT13","SEEN",1);
886 gMC->Gsatt("QT14","SEEN",1);
887 gMC->Gsatt("QT15","SEEN",1);
888 gMC->Gsatt("QT16","SEEN",1);
889 gMC->Gsatt("QT17","SEEN",1);
890 gMC->Gsatt("QT18","SEEN",1);
891 gMC->Gsatt("QC01","SEEN",1);
892 gMC->Gsatt("QC02","SEEN",1);
893 gMC->Gsatt("QC03","SEEN",1);
894 gMC->Gsatt("QC04","SEEN",1);
895 gMC->Gsatt("QC05","SEEN",1);
896 gMC->Gsatt("QTD1","SEEN",1);
897 gMC->Gsatt("QTD2","SEEN",1);
898 gMC->Gsatt("QTD3","SEEN",1);
899 gMC->Gsatt("MQXL","SEEN",1);
900 gMC->Gsatt("YMQL","SEEN",1);
901 gMC->Gsatt("MQX ","SEEN",1);
902 gMC->Gsatt("YMQ ","SEEN",1);
903 gMC->Gsatt("ZQYX","SEEN",1);
904 gMC->Gsatt("MD1 ","SEEN",1);
905 gMC->Gsatt("MD1V","SEEN",1);
906 gMC->Gsatt("YD1 ","SEEN",1);
907 gMC->Gsatt("MD2 ","SEEN",1);
908 gMC->Gsatt("YD2 ","SEEN",1);
909 gMC->Gsatt("ZNEU","SEEN",0);
910 gMC->Gsatt("ZNF1","SEEN",0);
911 gMC->Gsatt("ZNF2","SEEN",0);
912 gMC->Gsatt("ZNF3","SEEN",0);
913 gMC->Gsatt("ZNF4","SEEN",0);
914 gMC->Gsatt("ZNG1","SEEN",0);
915 gMC->Gsatt("ZNG2","SEEN",0);
916 gMC->Gsatt("ZNG3","SEEN",0);
917 gMC->Gsatt("ZNG4","SEEN",0);
918 gMC->Gsatt("ZNTX","SEEN",0);
919 gMC->Gsatt("ZN1 ","COLO",4);
920 gMC->Gsatt("ZN1 ","SEEN",1);
921 gMC->Gsatt("ZNSL","SEEN",0);
922 gMC->Gsatt("ZNST","SEEN",0);
923 gMC->Gsatt("ZPRO","SEEN",0);
924 gMC->Gsatt("ZPF1","SEEN",0);
925 gMC->Gsatt("ZPF2","SEEN",0);
926 gMC->Gsatt("ZPF3","SEEN",0);
927 gMC->Gsatt("ZPF4","SEEN",0);
928 gMC->Gsatt("ZPG1","SEEN",0);
929 gMC->Gsatt("ZPG2","SEEN",0);
930 gMC->Gsatt("ZPG3","SEEN",0);
931 gMC->Gsatt("ZPG4","SEEN",0);
932 gMC->Gsatt("ZPTX","SEEN",0);
933 gMC->Gsatt("ZP1 ","COLO",6);
934 gMC->Gsatt("ZP1 ","SEEN",1);
935 gMC->Gsatt("ZPSL","SEEN",0);
936 gMC->Gsatt("ZPST","SEEN",0);
937 gMC->Gsatt("ZEM ","COLO",7);
938 gMC->Gsatt("ZEM ","SEEN",1);
939 gMC->Gsatt("ZEMF","SEEN",0);
940 gMC->Gsatt("ZETR","SEEN",0);
941 gMC->Gsatt("ZEL0","SEEN",0);
942 gMC->Gsatt("ZEL1","SEEN",0);
943 gMC->Gsatt("ZEL2","SEEN",0);
944 gMC->Gsatt("ZEV0","SEEN",0);
945 gMC->Gsatt("ZEV1","SEEN",0);
946 gMC->Gsatt("ZES0","SEEN",0);
947 gMC->Gsatt("ZES1","SEEN",0);
948
949 //
950 gMC->Gdopt("hide", "on");
951 gMC->Gdopt("shad", "on");
952 gMC->Gsatt("*", "fill", 7);
953 gMC->SetClipBox(".");
954 gMC->SetClipBox("*", 0, 100, -100, 100, 12000, 16000);
955 gMC->DefaultRange();
956 gMC->Gdraw("alic", 40, 30, 0, 488, 220, .07, .07);
957 gMC->Gdhead(1111, "Zero Degree Calorimeter Version 1");
958 gMC->Gdman(18, 4, "MAN");
959}
960
961//_____________________________________________________________________________
962void AliZDCv1::CreateMaterials()
963{
964 //
965 // Create Materials for the Zero Degree Calorimeter
966 //
967
968 Int_t *idtmed = fIdtmed->GetArray();
969
970 Float_t dens, ubuf[1], wmat[2], a[2], z[2], deemax = -1;
971 Int_t i;
972
973 // --- Store in UBUF r0 for nuclear radius calculation R=r0*A**1/3
974
975 // --- Tantalum -> ZN passive material
976 ubuf[0] = 1.1;
977 AliMaterial(1, "TANT", 180.95, 73., 16.65, .4, 11.9, ubuf, 1);
978
979 // --- Tungsten
980// ubuf[0] = 1.11;
981// AliMaterial(1, "TUNG", 183.85, 74., 19.3, .35, 10.3, ubuf, 1);
982
983 // --- Brass (CuZn) -> ZP passive material
984 dens = 8.48;
985 a[0] = 63.546;
986 a[1] = 65.39;
987 z[0] = 29.;
988 z[1] = 30.;
989 wmat[0] = .63;
990 wmat[1] = .37;
991 AliMixture(2, "BRASS ", a, z, dens, 2, wmat);
992
993 // --- SiO2
994 dens = 2.64;
995 a[0] = 28.086;
996 a[1] = 15.9994;
997 z[0] = 14.;
998 z[1] = 8.;
999 wmat[0] = 1.;
1000 wmat[1] = 2.;
1001 AliMixture(3, "SIO2 ", a, z, dens, -2, wmat);
1002
1003 // --- Lead
1004 ubuf[0] = 1.12;
1005 AliMaterial(5, "LEAD", 207.19, 82., 11.35, .56, 18.5, ubuf, 1);
1006
1007 // --- Copper
1008 ubuf[0] = 1.10;
1009 AliMaterial(6, "COPP", 63.54, 29., 8.96, 1.4, 0., ubuf, 1);
1010
1011 // --- Iron (energy loss taken into account)
1012 ubuf[0] = 1.1;
1013 AliMaterial(7, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1);
1014
1015 // --- Iron (no energy loss)
1016 ubuf[0] = 1.1;
1017 AliMaterial(8, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1);
1018
1019 // --- Vacuum (no magnetic field)
1020 AliMaterial(10, "VOID", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0);
1021
1022 // --- Vacuum (with magnetic field)
1023 AliMaterial(11, "VOIM", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0);
1024
1025 // --- Air (no magnetic field)
1026 AliMaterial(12, "Air $", 14.61, 7.3, .001205, 30420., 67500., ubuf, 0);
1027
1028 // --- Definition of tracking media:
1029
1030 // --- Tantalum = 1 ;
1031 // --- Brass = 2 ;
1032 // --- Fibers (SiO2) = 3 ;
1033 // --- Fibers (SiO2) = 4 ;
1034 // --- Lead = 5 ;
1035 // --- Copper = 6 ;
1036 // --- Iron (with energy loss) = 7 ;
1037 // --- Iron (without energy loss) = 8 ;
1038 // --- Vacuum (no field) = 10
1039 // --- Vacuum (with field) = 11
1040 // --- Air (no field) = 12
1041
1042
1043 // --- Tracking media parameters
1044 Float_t epsil = .01, stmin=0.01, stemax = 1.;
1045// Int_t isxfld = gAlice->Field()->Integ();
1046// Float_t fieldm = gAlice->Field()->Max();
1047 Float_t fieldm = 0., tmaxfd = 0.;
1048 Int_t ifield = 0, isvolActive = 1, isvol = 0, inofld = 0;
1049
1050 AliMedium(1, "ZTANT", 1, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1051// AliMedium(1, "ZW", 1, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1052 AliMedium(2, "ZBRASS",2, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1053 AliMedium(3, "ZSIO2", 3, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1054 AliMedium(4, "ZQUAR", 3, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1055 AliMedium(5, "ZLEAD", 5, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1056// AliMedium(6, "ZCOPP", 6, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1057// AliMedium(7, "ZIRON", 7, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1058 AliMedium(6, "ZCOPP", 6, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1059 AliMedium(7, "ZIRON", 7, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1060 AliMedium(8, "ZIRONN",8, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1061 AliMedium(10,"ZVOID",10, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1062 AliMedium(12,"ZAIR", 12, 0, inofld, fieldm, tmaxfd, stemax,deemax, epsil, stmin);
1063
1064 ifield =2;
1065 fieldm = 45.;
1066 AliMedium(11, "ZVOIM", 11, isvol, ifield, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1067
1068 // Thresholds for showering in the ZDCs
1069 i = 1; //tantalum
1070 gMC->Gstpar(idtmed[i], "CUTGAM", .001);
1071 gMC->Gstpar(idtmed[i], "CUTELE", .001);
1072 gMC->Gstpar(idtmed[i], "CUTNEU", .01);
1073 gMC->Gstpar(idtmed[i], "CUTHAD", .01);
1074 i = 2; //brass
1075 gMC->Gstpar(idtmed[i], "CUTGAM", .001);
1076 gMC->Gstpar(idtmed[i], "CUTELE", .001);
1077 gMC->Gstpar(idtmed[i], "CUTNEU", .01);
1078 gMC->Gstpar(idtmed[i], "CUTHAD", .01);
1079 i = 5; //lead
1080 gMC->Gstpar(idtmed[i], "CUTGAM", .001);
1081 gMC->Gstpar(idtmed[i], "CUTELE", .001);
1082 gMC->Gstpar(idtmed[i], "CUTNEU", .01);
1083 gMC->Gstpar(idtmed[i], "CUTHAD", .01);
1084
1085 // Avoid too detailed showering in TDI
1086 i = 6; //copper
1087 gMC->Gstpar(idtmed[i], "CUTGAM", .1);
1088 gMC->Gstpar(idtmed[i], "CUTELE", .1);
1089 gMC->Gstpar(idtmed[i], "CUTNEU", 1.);
1090 gMC->Gstpar(idtmed[i], "CUTHAD", 1.);
1091
1092 // Avoid too detailed showering along the beam line
1093 i = 7; //iron with energy loss (ZIRON)
1094 gMC->Gstpar(idtmed[i], "CUTGAM", .1);
1095 gMC->Gstpar(idtmed[i], "CUTELE", .1);
1096 gMC->Gstpar(idtmed[i], "CUTNEU", 1.);
1097 gMC->Gstpar(idtmed[i], "CUTHAD", 1.);
1098
1099 // Avoid too detailed showering along the beam line
1100 i = 8; //iron with energy loss (ZIRONN)
1101 gMC->Gstpar(idtmed[i], "CUTGAM", .1);
1102 gMC->Gstpar(idtmed[i], "CUTELE", .1);
1103 gMC->Gstpar(idtmed[i], "CUTNEU", 1.);
1104 gMC->Gstpar(idtmed[i], "CUTHAD", 1.);
1105
1106 // Avoid interaction in fibers (only energy loss allowed)
1107 i = 3; //fibers (ZSI02)
1108 gMC->Gstpar(idtmed[i], "DCAY", 0.);
1109 gMC->Gstpar(idtmed[i], "MULS", 0.);
1110 gMC->Gstpar(idtmed[i], "PFIS", 0.);
1111 gMC->Gstpar(idtmed[i], "MUNU", 0.);
1112 gMC->Gstpar(idtmed[i], "LOSS", 1.);
1113 gMC->Gstpar(idtmed[i], "PHOT", 0.);
1114 gMC->Gstpar(idtmed[i], "COMP", 0.);
1115 gMC->Gstpar(idtmed[i], "PAIR", 0.);
1116 gMC->Gstpar(idtmed[i], "BREM", 0.);
1117 gMC->Gstpar(idtmed[i], "DRAY", 0.);
1118 gMC->Gstpar(idtmed[i], "ANNI", 0.);
1119 gMC->Gstpar(idtmed[i], "HADR", 0.);
1120 i = 4; //fibers (ZQUAR)
1121 gMC->Gstpar(idtmed[i], "DCAY", 0.);
1122 gMC->Gstpar(idtmed[i], "MULS", 0.);
1123 gMC->Gstpar(idtmed[i], "PFIS", 0.);
1124 gMC->Gstpar(idtmed[i], "MUNU", 0.);
1125 gMC->Gstpar(idtmed[i], "LOSS", 1.);
1126 gMC->Gstpar(idtmed[i], "PHOT", 0.);
1127 gMC->Gstpar(idtmed[i], "COMP", 0.);
1128 gMC->Gstpar(idtmed[i], "PAIR", 0.);
1129 gMC->Gstpar(idtmed[i], "BREM", 0.);
1130 gMC->Gstpar(idtmed[i], "DRAY", 0.);
1131 gMC->Gstpar(idtmed[i], "ANNI", 0.);
1132 gMC->Gstpar(idtmed[i], "HADR", 0.);
1133
1134 // Avoid interaction in void
1135 i = 11; //void with field
1136 gMC->Gstpar(idtmed[i], "DCAY", 0.);
1137 gMC->Gstpar(idtmed[i], "MULS", 0.);
1138 gMC->Gstpar(idtmed[i], "PFIS", 0.);
1139 gMC->Gstpar(idtmed[i], "MUNU", 0.);
1140 gMC->Gstpar(idtmed[i], "LOSS", 0.);
1141 gMC->Gstpar(idtmed[i], "PHOT", 0.);
1142 gMC->Gstpar(idtmed[i], "COMP", 0.);
1143 gMC->Gstpar(idtmed[i], "PAIR", 0.);
1144 gMC->Gstpar(idtmed[i], "BREM", 0.);
1145 gMC->Gstpar(idtmed[i], "DRAY", 0.);
1146 gMC->Gstpar(idtmed[i], "ANNI", 0.);
1147 gMC->Gstpar(idtmed[i], "HADR", 0.);
1148
1149 //
1150 fMedSensZN = idtmed[1]; // Sensitive volume: ZN passive material
1151 fMedSensZP = idtmed[2]; // Sensitive volume: ZP passive material
1152 fMedSensF1 = idtmed[3]; // Sensitive volume: fibres type 1
1153 fMedSensF2 = idtmed[4]; // Sensitive volume: fibres type 2
1154 fMedSensZEM = idtmed[5]; // Sensitive volume: ZEM passive material
1155// fMedSensTDI = idtmed[6]; // Sensitive volume: TDI Cu shield
1156// fMedSensPI = idtmed[7]; // Sensitive volume: beam pipes
1157 fMedSensGR = idtmed[12]; // Sensitive volume: air into the grooves
1158}
1159
1160//_____________________________________________________________________________
1161void AliZDCv1::Init()
1162{
1163 InitTables();
1164}
1165
1166//_____________________________________________________________________________
1167void AliZDCv1::InitTables()
1168{
1169 Int_t k, j;
1170
1171 char *lightfName1,*lightfName2,*lightfName3,*lightfName4,
1172 *lightfName5,*lightfName6,*lightfName7,*lightfName8;
1173 FILE *fp1, *fp2, *fp3, *fp4, *fp5, *fp6, *fp7, *fp8;
1174
1175 // --- Reading light tables for ZN
1176 lightfName1 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362207s");
1177 if((fp1 = fopen(lightfName1,"r")) == NULL){
1178 printf("Cannot open file fp1 \n");
1179 return;
1180 }
1181 lightfName2 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362208s");
1182 if((fp2 = fopen(lightfName2,"r")) == NULL){
1183 printf("Cannot open file fp2 \n");
1184 return;
1185 }
1186 lightfName3 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362209s");
1187 if((fp3 = fopen(lightfName3,"r")) == NULL){
1188 printf("Cannot open file fp3 \n");
1189 return;
1190 }
1191 lightfName4 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362210s");
1192 if((fp4 = fopen(lightfName4,"r")) == NULL){
1193 printf("Cannot open file fp4 \n");
1194 return;
1195 }
1196
1197 for(k=0; k<fNalfan; k++){
1198 for(j=0; j<fNben; j++){
1199 fscanf(fp1,"%f",&fTablen[0][k][j]);
1200 fscanf(fp2,"%f",&fTablen[1][k][j]);
1201 fscanf(fp3,"%f",&fTablen[2][k][j]);
1202 fscanf(fp4,"%f",&fTablen[3][k][j]);
1203 }
1204 }
1205 fclose(fp1);
1206 fclose(fp2);
1207 fclose(fp3);
1208 fclose(fp4);
1209
1210 // --- Reading light tables for ZP and ZEM
1211 lightfName5 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552207s");
1212 if((fp5 = fopen(lightfName5,"r")) == NULL){
1213 printf("Cannot open file fp5 \n");
1214 return;
1215 }
1216 lightfName6 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552208s");
1217 if((fp6 = fopen(lightfName6,"r")) == NULL){
1218 printf("Cannot open file fp6 \n");
1219 return;
1220 }
1221 lightfName7 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552209s");
1222 if((fp7 = fopen(lightfName7,"r")) == NULL){
1223 printf("Cannot open file fp7 \n");
1224 return;
1225 }
1226 lightfName8 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552210s");
1227 if((fp8 = fopen(lightfName8,"r")) == NULL){
1228 printf("Cannot open file fp8 \n");
1229 return;
1230 }
1231
1232 for(k=0; k<fNalfap; k++){
1233 for(j=0; j<fNbep; j++){
1234 fscanf(fp5,"%f",&fTablep[0][k][j]);
1235 fscanf(fp6,"%f",&fTablep[1][k][j]);
1236 fscanf(fp7,"%f",&fTablep[2][k][j]);
1237 fscanf(fp8,"%f",&fTablep[3][k][j]);
1238 }
1239 }
1240 fclose(fp5);
1241 fclose(fp6);
1242 fclose(fp7);
1243 fclose(fp8);
1244}
1245
1246//_____________________________________________________________________________
1247Int_t AliZDCv1::Digitize(Int_t Det, Int_t Quad, Int_t Light)
1248{
1249 // Evaluation of the ADC channel corresponding to the light yield Light
1250
1251 if(fDebug == 1){
1252 printf("\n Digitize -> Det = %d, Quad = %d, Light = %d\n", Det, Quad, Light);
1253 }
1254
1255 // Parameters for conversion of light yield in ADC channels
1256 Float_t fPMGain[3][5]; // PM gain
1257 Float_t fADCRes; // ADC conversion factor
1258
1259 Int_t j,i;
1260 for(i=0; i<3; i++){
1261 for(j=0; j<5; j++){
1262 fPMGain[i][j] = 100000.;
1263 }
1264 }
1265 fADCRes = 0.00000064; // ADC Resolution: 250 fC/ADCch
1266
1267 Int_t ADCch = Int_t(Light*fPMGain[Det-1][Quad]*fADCRes);
1268
1269 return ADCch;
1270}
1271
1272
1273//_____________________________________________________________________________
1274void AliZDCv1::SDigits2Digits()
1275{
1276 Hits2Digits(gAlice->GetNtrack());
1277}
1278
1279//_____________________________________________________________________________
1280void AliZDCv1::Hits2Digits(Int_t ntracks)
1281{
1282 AliZDCDigit *newdigit;
1283 AliZDCHit *hit;
1284
1285 Int_t PMCZN = 0, PMCZP = 0, PMQZN[4], PMQZP[4], PMZEM = 0;
1286
1287 Int_t i;
1288 for(i=0; i<4; i++){
1289 PMQZN[i] =0;
1290 PMQZP[i] =0;
1291 }
1292
1293 Int_t itrack = 0;
1294 for(itrack=0; itrack<ntracks; itrack++){
1295 gAlice->ResetHits();
1296 gAlice->TreeH()->GetEvent(itrack);
1297 for(i=0; i<fHits->GetEntries(); i++){
1298 hit = (AliZDCHit*)fHits->At(i);
1299 Int_t det = hit->GetVolume(0);
1300 Int_t quad = hit->GetVolume(1);
1301 Int_t lightQ = Int_t(hit->GetLightPMQ());
1302 Int_t lightC = Int_t(hit->GetLightPMC());
1303 if(fDebug == 1)
1304 printf(" \n itrack = %d, fNhits = %d, det = %d, quad = %d,"
1305 "lightC = %d lightQ = %d\n", itrack, fNhits, det, quad, lightC, lightQ);
1306
1307 if(det == 1){ //ZN
1308 PMCZN = PMCZN + lightC;
1309 PMQZN[quad-1] = PMQZN[quad-1] + lightQ;
1310 }
1311
1312 if(det == 2){ //ZP
1313 PMCZP = PMCZP + lightC;
1314 PMQZP[quad-1] = PMQZP[quad-1] + lightQ;
1315 }
1316
1317 if(det == 3){ //ZEM
1318 PMZEM = PMZEM + lightC;
1319 }
1320 } // Hits loop
1321
1322 } // Tracks loop
1323
1324 if(fDebug == 1){
1325 printf("\n PMCZN = %d, PMQZN[0] = %d, PMQZN[1] = %d, PMQZN[2] = %d, PMQZN[3] = %d\n"
1326 , PMCZN, PMQZN[0], PMQZN[1], PMQZN[2], PMQZN[3]);
1327 printf("\n PMCZP = %d, PMQZP[0] = %d, PMQZP[1] = %d, PMQZP[2] = %d, PMQZP[3] = %d\n"
1328 , PMCZP, PMQZP[0], PMQZP[1], PMQZP[2], PMQZP[3]);
1329 printf("\n PMZEM = %d\n", PMZEM);
1330 }
1331
1332 // ------------------------------------ Hits2Digits
1333 // Digits for ZN
1334 newdigit = new AliZDCDigit(1, 0, Digitize(1, 0, PMCZN));
1335 new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
1336 fNdigits++;
1337 delete newdigit;
1338
1339 Int_t j;
1340 for(j=0; j<4; j++){
1341 newdigit = new AliZDCDigit(1, j+1, Digitize(1, j+1, PMQZN[j]));
1342 new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
1343 fNdigits++;
1344 delete newdigit;
1345 }
1346
1347 // Digits for ZP
1348 newdigit = new AliZDCDigit(2, 0, Digitize(2, 0, PMCZP));
1349 new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
1350 fNdigits++;
1351 delete newdigit;
1352
1353 Int_t k;
1354 for(k=0; k<4; k++){
1355 newdigit = new AliZDCDigit(2, k+1, Digitize(2, k+1, PMQZP[k]));
1356 new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
1357 fNdigits++;
1358 delete newdigit;
1359 }
1360
1361 // Digits for ZEM
1362 newdigit = new AliZDCDigit(3, 0, Digitize(3, 0, PMZEM));
1363 new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit);
1364 fNdigits++;
1365 delete newdigit;
1366
1367
1368 gAlice->TreeD()->Fill();
1369 gAlice->TreeD()->Write(0,TObject::kOverwrite);
1370
1371// if(fDebug == 1){
1372// printf("\n Event Digits -----------------------------------------------------\n");
1373// fDigits->Print("");
1374// }
1375
1376}
1377//_____________________________________________________________________________
1378 void AliZDCv1::MakeBranch(Option_t *opt, const char *file)
1379{
1380 //
1381 // Create a new branch in the current Root Tree
1382 //
1383
1384 AliDetector::MakeBranch(opt);
1385
1386 Char_t branchname[10];
1387 sprintf(branchname,"%s",GetName());
1388 const char *cD = strstr(opt,"D");
1389
1390 if (gAlice->TreeD() && cD) {
1391
1392 // Creation of the digits from hits
1393
1394 if(fDigits!=0) fDigits->Clear();
1395 else fDigits = new TClonesArray ("AliZDCDigit",1000);
1396 char branchname[10];
1397 sprintf(branchname,"%s",GetName());
1398 MakeBranchInTree(gAlice->TreeD(),
1399 branchname, &fDigits, fBufferSize, file) ;
1400 printf("* AliZDCv1::MakeBranch * Making Branch %s for digits\n\n",branchname);
1401 }
1402
1403}
1404//_____________________________________________________________________________
1405void AliZDCv1::StepManager()
1406{
1407 //
1408 // Routine called at every step in the Zero Degree Calorimeters
1409 //
1410
1411 Int_t j, vol[2], ibeta=0, ialfa, ibe, nphe;
1412 Float_t x[3], xdet[3], destep, hits[10], m, ekin, um[3], ud[3], be, radius, out;
1413 TLorentzVector s, p;
1414 const char *knamed;
1415
1416 for (j=0;j<10;j++) hits[j]=0;
1417
1418 if((gMC->GetMedium() == fMedSensZN) || (gMC->GetMedium() == fMedSensZP) ||
1419 (gMC->GetMedium() == fMedSensGR) || (gMC->GetMedium() == fMedSensF1) ||
1420 (gMC->GetMedium() == fMedSensF2) || (gMC->GetMedium() == fMedSensZEM)){
1421// (gMC->GetMedium() == fMedSensPI) || (gMC->GetMedium() == fMedSensTDI)){
1422
1423 // If particle interacts with beam pipe -> return
1424// if((gMC->GetMedium() == fMedSensPI) || (gMC->GetMedium() == fMedSensTDI)){
1425 // If option NoShower is set -> StopTrack
1426// if(fNoShower==1) {
1427// if(gMC->GetMedium() == fMedSensPI) {
1428// knamed = gMC->CurrentVolName();
1429// if((!strncmp(knamed,"MQ",2)) || (!strncmp(knamed,"YM",2))) fpLostIT += 1;
1430// if((!strncmp(knamed,"MD1",3))|| (!strncmp(knamed,"YD1",2))) fpLostD1 += 1;
1431// }
1432// if(gMC->GetMedium() == fMedSensTDI) fpLostTDI += 1;
1433// gMC->StopTrack();
1434// printf("\n # of p lost in Inner Triplet = %d\n",fpLostIT);
1435// printf("\n # of p lost in D1 = %d\n",fpLostD1);
1436// printf("\n # of p lost in TDI = %d\n",fpLostTDI);
1437// }
1438// return;
1439// }
1440
1441 //Particle coordinates
1442 gMC->TrackPosition(s);
1443 for(j=0; j<=2; j++){
1444 x[j] = s[j];
1445 }
1446 hits[0] = x[0];
1447 hits[1] = x[1];
1448 hits[2] = x[2];
1449
1450 // Determine in which ZDC the particle is
1451 knamed = gMC->CurrentVolName();
1452 if(!strncmp(knamed,"ZN",2))vol[0]=1;
1453 if(!strncmp(knamed,"ZP",2))vol[0]=2;
1454 if(!strncmp(knamed,"ZE",2))vol[0]=3;
1455
1456 // Determine in which quadrant the particle is
1457
1458 //Quadrant in ZN
1459 if(vol[0]==1){
1460 xdet[0] = x[0]-fPosZN[0];
1461 xdet[1] = x[1]-fPosZN[1];
1462 if((xdet[0]<=0.) && (xdet[1]>=0.)) vol[1]=1;
1463 if((xdet[0]>0.) && (xdet[1]>0.)) vol[1]=2;
1464 if((xdet[0]<0.) && (xdet[1]<0.)) vol[1]=3;
1465 if((xdet[0]>0.) && (xdet[1]<0.)) vol[1]=4;
1466 }
1467
1468 //Quadrant in ZP
1469 if(vol[0]==2){
1470 xdet[0] = x[0]-fPosZP[0];
1471 xdet[1] = x[1]-fPosZP[1];
1472 if(xdet[0]>fDimZP[0])xdet[0]=fDimZP[0]-0.01;
1473 if(xdet[0]<-fDimZP[0])xdet[0]=-fDimZP[0]+0.01;
1474 Float_t xqZP = xdet[0]/(fDimZP[0]/2);
1475 for(int i=1; i<=4; i++){
1476 if(xqZP>=(i-3) && xqZP<(i-2)){
1477 vol[1] = i;
1478 if(i==0) printf("\n!!! vol[1] = 0 -> xqZP = %f\n", xqZP);
1479 break;
1480 }
1481 }
1482 }
1483
1484 //ZEM has only 1 quadrant
1485 if(vol[0] == 3){
1486 vol[1] = 1;
1487 xdet[0] = x[0]-fPosZEM[0];
1488 xdet[1] = x[1]-fPosZEM[1];
1489 }
1490
1491 // Store impact point and kinetic energy of the ENTERING particle
1492
1493// if(Curtrack==Prim){
1494 if(gMC->IsTrackEntering()){
1495 //Particle energy
1496 gMC->TrackMomentum(p);
1497 hits[3] = p[3];
1498 // Impact point on ZDC
1499 hits[4] = xdet[0];
1500 hits[5] = xdet[1];
1501 hits[6] = 0;
1502 hits[7] = 0;
1503 hits[8] = 0;
1504 hits[9] = 0;
1505
1506// Int_t PcID = gMC->TrackPid();
1507// printf("Pc ID -> %d\n",PcID);
1508 AddHit(gAlice->CurrentTrack(), vol, hits);
1509
1510 if(fNoShower==1){
1511// fpDetected += 1;
1512 gMC->StopTrack();
1513// printf("\n # of detected p = %d\n",fpDetected);
1514 return;
1515 }
1516 }
1517// } // Curtrack IF
1518
1519 // Charged particles -> Energy loss
1520 if((destep=gMC->Edep())){
1521 if(gMC->IsTrackStop()){
1522 gMC->TrackMomentum(p);
1523 m = gMC->TrackMass();
1524 ekin = p[3]-m;
1525 hits[9] = ekin;
1526 hits[7] = 0.;
1527 hits[8] = 0.;
1528 AddHit(gAlice->CurrentTrack(), vol, hits);
1529 }
1530 else{
1531 hits[9] = destep;
1532 hits[7] = 0.;
1533 hits[8] = 0.;
1534 AddHit(gAlice->CurrentTrack(), vol, hits);
1535 }
1536// printf(" Dep. E = %f \n",hits[9]);
1537 }
1538 }// NB -> Questa parentesi (chiude il primo IF) io la sposterei al fondo!???
1539
1540
1541 // *** Light production in fibres
1542 if((gMC->GetMedium() == fMedSensF1) || (gMC->GetMedium() == fMedSensF2)){
1543
1544 //Select charged particles
1545 if((destep=gMC->Edep())){
1546
1547 // Particle velocity
1548 gMC->TrackMomentum(p);
1549 Float_t ptot=TMath::Sqrt(p[0]*p[0]+p[1]*p[1]+p[2]*p[2]);
1550 Float_t beta = ptot/p[3];
1551 if(beta<0.67) return;
1552 if((beta>=0.67) && (beta<=0.75)) ibeta = 0;
1553 if((beta>0.75) && (beta<=0.85)) ibeta = 1;
1554 if((beta>0.85) && (beta<=0.95)) ibeta = 2;
1555 if(beta>0.95) ibeta = 3;
1556
1557 // Angle between particle trajectory and fibre axis
1558 // 1 -> Momentum directions
1559 um[0] = p[0]/ptot;
1560 um[1] = p[1]/ptot;
1561 um[2] = p[2]/ptot;
1562 gMC->Gmtod(um,ud,2);
1563 // 2 -> Angle < limit angle
1564 Double_t alfar = TMath::ACos(ud[2]);
1565 Double_t alfa = alfar*kRaddeg;
1566 if(alfa>=110.) return;
1567 ialfa = Int_t(1.+alfa/2.);
1568
1569 // Distance between particle trajectory and fibre axis
1570 gMC->TrackPosition(s);
1571 for(j=0; j<=2; j++){
1572 x[j] = s[j];
1573 }
1574 gMC->Gmtod(x,xdet,1);
1575 if(TMath::Abs(ud[0])>0.00001){
1576 Float_t dcoeff = ud[1]/ud[0];
1577 be = TMath::Abs((xdet[1]-dcoeff*xdet[0])/TMath::Sqrt(dcoeff*dcoeff+1.));
1578 }
1579 else{
1580 be = TMath::Abs(ud[0]);
1581 }
1582
1583 if((vol[0]==1)) radius = fFibZN[1];
1584 if((vol[0]==2)) radius = fFibZP[1];
1585 ibe = Int_t(be*1000.+1);
1586
1587 //Looking into the light tables
1588 Float_t charge = gMC->TrackCharge();
1589
1590 // (1) ZN
1591 if((vol[0]==1)) {
1592 if(ibe>fNben) ibe=fNben;
1593 out = charge*charge*fTablen[ibeta][ialfa][ibe];
1594 nphe = gRandom->Poisson(out);
1595// printf("ZN --- ibeta = %d, ialfa = %d, ibe = %d"
1596// " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe);
1597 if(gMC->GetMedium() == fMedSensF1){
1598 hits[7] = nphe; //fLightPMQ
1599 hits[8] = 0;
1600 hits[9] = 0;
1601 AddHit(gAlice->CurrentTrack(), vol, hits);
1602 }
1603 else{
1604 hits[7] = 0;
1605 hits[8] = nphe; //fLightPMC
1606 hits[9] = 0;
1607 AddHit(gAlice->CurrentTrack(), vol, hits);
1608 }
1609 }
1610
1611 // (2) ZP
1612 if((vol[0]==2)) {
1613 if(ibe>fNbep) ibe=fNbep;
1614 out = charge*charge*fTablep[ibeta][ialfa][ibe];
1615 nphe = gRandom->Poisson(out);
1616// printf("ZP --- ibeta = %d, ialfa = %d, ibe = %d"
1617// " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe);
1618 if(gMC->GetMedium() == fMedSensF1){
1619 hits[7] = nphe; //fLightPMQ
1620 hits[8] = 0;
1621 hits[9] = 0;
1622 AddHit(gAlice->CurrentTrack(), vol, hits);
1623 }
1624 else{
1625 hits[7] = 0;
1626 hits[8] = nphe; //fLightPMC
1627 hits[9] = 0;
1628 AddHit(gAlice->CurrentTrack(), vol, hits);
1629 }
1630 }
1631 // (3) ZEM
1632 if((vol[0]==3)) {
1633 if(ibe>fNbep) ibe=fNbep;
1634 out = charge*charge*fTablep[ibeta][ialfa][ibe];
1635 nphe = gRandom->Poisson(out);
1636// printf("ZEM --- ibeta = %d, ialfa = %d, ibe = %d"
1637// " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe);
1638 hits[7] = 0;
1639 hits[8] = nphe; //fLightPMC
1640 hits[9] = 0;
1641 AddHit(gAlice->CurrentTrack(), vol, hits);
1642 }
1643 }
1644 }
1645}