ACORDE/AliACORDEv1.cxx

   1 /**************************************************************************
   2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
   3  *                                                                        *
   4  * Author: The ALICE Off-line Project.                                    *
   5  * Contributors are mentioned in the code where appropriate.              *
   6  *                                                                        *
   7  * Permission to use, copy, modify and distribute this software and its   *
   8  * documentation strictly for non-commercial purposes is hereby granted   *
   9  * without fee, provided that the above copyright notice appears in all   *
  10  * copies and that both the copyright notice and this permission notice   *
  11  * appear in the supporting documentation. The authors make no claims     *
  12  * about the suitability of this software for any purpose. It is          *
  13  * provided "as is" without express or implied warranty.                  *
  14  **************************************************************************/
  15
  16 /* $Id: AliACORDEv1.cxx,v 1.2 2007/12/03 08:40:00 hristov Exp $ */
  17
  18 ///////////////////////////////////////////////////////////////////////////////
  19 //                                                                           //
  20 // ALICE Cosmic Ray Trigger                                                  //
  21 //                                                                           //
  22 //  This class contains the functions for final version of the ALICE Cosmic  //
  23 //  Ray Trigger. This version will be used to simulation comic rays in alice //
  24 //  with all the detectors. It includes the last survey of 2009.             //
  25 //  It include geometry and hits (position and momentum)                     //
  26 //                                                                           //
  27 //   Author: Mario Rodriguez Cahuantzi, FCFM-BUAP, Puebla, Pue. Mexico       //
  28 //                                                                           //
  29 //                  Send comments to:                                        //
  30 //                                                                           //
  31 //      Arturo Fernandez Tellez         <afernand@fcfm.buap.mx>              //
  32 //      Eleazar Cuautle Flores          <ecuautle@nucleares.unam.mx>         //
  33 //      Mario Rodriguez Cahuantzi       <mrodrigu@mail.cern.ch>              //
  34 //                                                                           //
  35 //                      Puebla, Pue. Mexico December 2007                    //
  36 //                                                                           //
  37 //      Last Update: Nov. 17th 2009                                          //
  38 //      Mario Rodriguez Cahuantzi                                            //
  39 ///////////////////////////////////////////////////////////////////////////////
  40
  41
  42 #include <Riostream.h>
  43 #include <TGeoMatrix.h>
  44 #include <TMath.h>
  45 #include <TString.h>
  46 #include <TSystem.h>
  47
  48 #include "AliConst.h"
  49 #include "AliRun.h"
  50
  51 #include "TGeoManager.h"
  52 #include "TGeoVolume.h"
  53 #include "TGeoPcon.h"
  54 #include "TGeoPgon.h"
  55 #include "TGeoTrd1.h"
  56 #include "TGeoCompositeShape.h"
  57 #include "TGeoPara.h"
  58
  59 #include "AliACORDEv1.h"
  60 #include <TClonesArray.h>
  61 #include <TLorentzVector.h>
  62 #include <TVirtualMC.h>
  63 #include <TPDGCode.h>
  64
  65 #include "AliRun.h"
  66 #include "AliConst.h"
  67 #include "AliACORDEhit.h"
  68 #include "AliACORDEConstants.h"
  69 #include "AliMC.h"
  70 #include "AliLog.h"
  71
  72 ClassImp(AliACORDEv1)
  73
  74 //_____________________________________________________________________________
  75 AliACORDEv1::AliACORDEv1()
  76   : AliACORDE()
  77 {
  78   //
  79   // Default constructor
  80   fIshunt = 0;
  81   fHits = 0;
  82   //
  83 }
  84 //_____________________________________________________________________________
  85 AliACORDEv1::AliACORDEv1(const char *name, const char *title)
  86   : AliACORDE(name, title)
  87 {
  88   //
  89   // Standard constructor
  90   //
  91   fIshunt = 1; // All hits are associated with primary particles
  92   fHits =  new TClonesArray("AliACORDEhit",400);
  93   gAlice->GetMCApp()->AddHitList(fHits);
  94 }
  95 //_____________________________________________________________________________
  96 AliACORDEv1::~AliACORDEv1()
  97 {
  98   //
  99   // Default destructor
 100   //
 101 }
 102 //_____________________________________________________________________________
 103 void AliACORDEv1::CreateGeometry()
 104 {
 105   CreateAcorde();
 106 }
 107 void AliACORDEv1::CreateAcorde()
 108 {
 109
 110         // Call the global constants for the Modules
 111
 112         AliACORDEConstants* constants = AliACORDEConstants::Instance();
 113
 114         // Get the Alice Volume
 115
 116         TGeoVolume *alice = gGeoManager->GetVolume("ALIC");
 117
 118         // Define some materials & medium
 119
 120         //*** Aluminium ***
 121
 122         TGeoMedium* aluminium = gGeoManager->GetMedium("ACORDE_ALU_C0");
 123
 124         //*** Scintillator ***
 125
 126         TGeoMedium* scintillator = gGeoManager->GetMedium("ACORDE_CPV scint.1");
 127
 128         //Define the mother volume for the ACORDE detector
 129
 130         TGeoVolume *acorde = new TGeoVolumeAssembly("ACORDE");
 131
 132
 133         // Define 2 main-daughter volumes for ACORDE
 134
 135         TGeoVolume *supportBars = new TGeoVolumeAssembly("ACORDE_SUPPORTS_BARS");
 136         TGeoVolume *acordeModules = new TGeoVolumeAssembly("ALL_ACORDE_MODULES");
 137
 138
 139         // Define rotation Matrix for Side's faces in Alice
 140
 141         TGeoRotation *idrotm231 = new TGeoRotation("idrotm231",90, 45, 90, 135, 0, 0);
 142         TGeoRotation *idrotm232 = new TGeoRotation("idrotm232",90, 315, 90, 45, 0, 0);
 143
 144         // Begin the Geometry for ACORDE
 145
 146         // *** Definition of ACORDE's Modules ***
 147
 148         // Define Measures of ACORDE's Modules
 149
 150         Float_t acoFrameBox1[3],acoFrameBox2[3];
 151
 152         acoFrameBox1[0] = constants->ModuleLength()/2;
 153         acoFrameBox1[1] = constants->ModuleHeight()/2;
 154         acoFrameBox1[2] = 2.50;
 155
 156         acoFrameBox2[0] = 20.0;
 157         acoFrameBox2[1] = constants->ModuleHeight()/2;
 158         acoFrameBox2[2] = 10.0;
 159
 160         // Define Measures of Scintillators
 161
 162         Float_t acoScinBox[3];
 163         acoScinBox[0] = constants->PlasticLength()/2;
 164         acoScinBox[1] = constants->PlasticHeight()/2;
 165         acoScinBox[2] = constants->PlasticWidth()/2;
 166
 167
 168         // Create the Modules of ACORDE, 1 aluminium frame and two scintillator plastics
 169
 170         //*** Aluminium frame ***
 171
 172         TGeoBBox *acordeModFrameBoxL = new TGeoBBox("acordeModFrameBoxL",acoFrameBox1[0],acoFrameBox1[1],acoFrameBox1[2]);
 173         TGeoBBox *acordeModFrameBoxH = new TGeoBBox("acordeModFrameBoxH",acoFrameBox2[0],acoFrameBox2[1],acoFrameBox2[2]);
 174         TGeoVolume *acordeModFrameVolumeL = new TGeoVolume("ACORDEMODFRAMEVOLUMEL",acordeModFrameBoxL,aluminium);
 175         TGeoVolume *acordeModFrameVolumeH = new TGeoVolume("ACORDEMODFRAMEVOLUMEH",acordeModFrameBoxH,aluminium);
 176
 177
 178         //*** Scintillators ***
 179
 180         TGeoBBox *acordeScintillatorBox = new TGeoBBox("acordeScintillatorBox",acoScinBox[0],acoScinBox[1],acoScinBox[2]);
 181         TGeoVolume *acordeScintillatorVolume = new TGeoVolume("ACORDESCINTILLATORMODULE",acordeScintillatorBox,scintillator);
 182
 183
 184         // Here I create a single ACORDE module and then we make 60 copies of it
 185
 186         TGeoVolume *acordeSingleModule = new TGeoVolumeAssembly("ACORDE_MODULE");
 187         acordeSingleModule->AddNode(acordeModFrameVolumeL,1,new TGeoTranslation("acordeFrame_01",0,0,12.5));
 188         acordeSingleModule->AddNode(acordeModFrameVolumeL,2,new TGeoTranslation("acordeFrame_02",0,0,-12.5));
 189         acordeSingleModule->AddNode(acordeModFrameVolumeH,3,new TGeoTranslation("acordeFrame_03",130,0,0));
 190         acordeSingleModule->AddNode(acordeModFrameVolumeH,4,new TGeoTranslation("acordeFrame_04",-130,0,0));
 191         acordeSingleModule->AddNode(acordeScintillatorVolume,5, new TGeoTranslation("acordeScintillator_01",0,1,0));
 192         acordeSingleModule->AddNode(acordeScintillatorVolume,6, new TGeoTranslation("acordeScintillator_01",0,-1,0));
 193
 194         // Put the Modules of In-Face
 195
 196         for(Int_t iAcordeModule=1;iAcordeModule<9;iAcordeModule++)
 197         {
 198
 199                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 200                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 201                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 202
 203                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,
 204                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm232));
 205         }
 206
 207         for(Int_t iAcordeModule=10;iAcordeModule<20;iAcordeModule++)
 208         {
 209                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 210                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 211                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 212
 213                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,
 214                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm232));
 215         }
 216
 217         // Put he Modules of Up-Face
 218
 219         for(Int_t iAcordeModule=20;iAcordeModule<40;iAcordeModule++)
 220         {
 221                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 222                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 223                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 224
 225                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,new TGeoTranslation("aco01",posx,posy,posz));
 226         }
 227
 228         // Put the Modules of Out-Face
 229
 230         for(Int_t iAcordeModule=40;iAcordeModule<50;iAcordeModule++)
 231         {
 232                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 233                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 234                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 235
 236                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,
 237                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm231));
 238         }
 239
 240         // Put the Modules of Out-Face
 241
 242         for(Int_t iAcordeModule=51;iAcordeModule<59;iAcordeModule++)
 243         {
 244                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 245                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 246                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 247                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,
 248                                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm231));
 249         }
 250
 251         // Put the 4-central modules (Old-ITS modules)
 252         if (Get4CentralModulesGeometry())
 253         {
 254                 acordeModules->AddNode(acordeSingleModule,0,
 255                         new TGeoTranslation("Mod0_0",constants->CenterModulePositionX(0),constants->CenterModulePositionY(0),constants->CenterModulePositionZ(0)));
 256                 acordeModules->AddNode(acordeSingleModule,9,
 257                         new TGeoTranslation("Mod0_9",constants->CenterModulePositionX(9),constants->CenterModulePositionY(9),constants->CenterModulePositionZ(9)));
 258                 acordeModules->AddNode(acordeSingleModule,50,
 259                         new TGeoTranslation("Mod0_50",constants->CenterModulePositionX(50),constants->CenterModulePositionY(50),constants->CenterModulePositionZ(50)));
 260                 acordeModules->AddNode(acordeSingleModule,59,
 261                         new TGeoTranslation("Mod0_59",constants->CenterModulePositionX(59),constants->CenterModulePositionY(59),constants->CenterModulePositionZ(59)));
 262         }
 263
 264         // Create a dummy support & bars of Aluminium (it doesn't exist a survey of this structure)
 265
 266         Float_t boxLongSupport[3],boxThinSupport[3];
 267
 268         boxLongSupport[0]=10.0;
 269         boxLongSupport[1]=0.5;
 270         boxLongSupport[2]=500.0;
 271
 272         boxThinSupport[0]=1.0;
 273         boxThinSupport[1]=7.0;
 274         boxThinSupport[2]=500.0;
 275
 276         TGeoBBox *acordeLongSupport = new TGeoBBox("ACORDELONGSUPPORT",boxLongSupport[0],boxLongSupport[1],boxLongSupport[2]);
 277         TGeoBBox *acordeThinSupport = new TGeoBBox("ACORDETHINSUPPORT",boxThinSupport[0],boxThinSupport[1],boxThinSupport[2]);
 278
 279         TGeoVolume *acordeLSupport = new TGeoVolume("ACORDELS",acordeLongSupport,aluminium);
 280         TGeoVolume *acordeTSupport = new TGeoVolume("ACORDETS",acordeThinSupport,aluminium);
 281         TGeoVolume *acordeMainSupport = new TGeoVolumeAssembly("ACORDE_SUPPORT");
 282         acordeMainSupport->AddNode(acordeLSupport,1,new TGeoTranslation("ACOLSA",0,7.5,0));
 283         acordeMainSupport->AddNode(acordeLSupport,2,new TGeoTranslation("ACOLSB",0,-7.5,0));
 284         acordeMainSupport->AddNode(acordeTSupport,3);
 285
 286         // Set the values for the bars support
 287
 288         Float_t boxSingleBar[3];
 289         boxSingleBar[0]=10;
 290         boxSingleBar[1]=37;//36.722; // Correction to avoid overlaps with the L3 magnet
 291         boxSingleBar[2]=10;
 292
 293         Float_t boxUnionUp[3];
 294         boxUnionUp[0]=10;
 295         boxUnionUp[1]=0.5;
 296         boxUnionUp[2]=15;
 297
 298         Float_t boxUnionDown[3];
 299         boxUnionDown[0]=20;
 300         boxUnionDown[1]=1;
 301         boxUnionDown[2]=20;
 302
 303         // Volume and Box for the bar
 304
 305         TGeoBBox *acordeSingleBarSupport = new TGeoBBox("ACORDESBARS",boxSingleBar[0],boxSingleBar[1],boxSingleBar[2]);
 306         TGeoVolume *acordeBarSupport = new TGeoVolume("ACORDEBARSUPPORT",acordeSingleBarSupport,aluminium);
 307
 308         // Volume and Box for the bar union with the long support (Up-with supports and Down with L3 magnet)
 309
 310         TGeoBBox *acordeSingleBoxUnionUp = new TGeoBBox("ACORDEBUP",boxUnionUp[0],boxUnionUp[1],boxUnionUp[2]);
 311         TGeoVolume *acordeBoxUnionUp = new TGeoVolume("ACORDEBOXUNIONUP",acordeSingleBoxUnionUp,aluminium);
 312
 313         TGeoBBox *acordeSingleBoxUnionDown = new TGeoBBox("ACORDEBDOWN",boxUnionDown[0],boxUnionDown[1],boxUnionDown[2]);
 314         TGeoVolume *acordeBoxUnionDown = new TGeoVolume("ACORDEBOXUNIONDOWN",acordeSingleBoxUnionDown,aluminium);
 315
 316         TGeoVolume *acordeMainBar = new TGeoVolumeAssembly("ACORDE_BAR");
 317         acordeMainBar->AddNode(acordeBoxUnionUp,1,new TGeoTranslation("ACOBAR01",0,boxSingleBar[1]+boxUnionUp[1],0));
 318         acordeMainBar->AddNode(acordeBarSupport,2);
 319         acordeMainBar->AddNode(acordeBoxUnionDown,3,new TGeoTranslation("ACOBAR01",0,-boxSingleBar[1]-boxUnionDown[1],0));
 320
 321         // Volume for the Full support (supports and bars) UP face of L3 Magnet
 322         Float_t supportPosXIn = constants->CenterModulePositionX(20);
 323         Float_t supportPosY = 859.044-7.5-5.5; // Minimum module position Y less the heigh of the support
 324         Float_t supportPosZ = 0;
 325         Float_t supportPosXOut = constants->CenterModulePositionX(30);
 326         Float_t deltaXA = 120.;
 327         Float_t deltaXB = 60.;
 328
 329         TGeoVolume *acordeFullSupportUpFace = new TGeoVolumeAssembly("ACORDE_FULL_SUPPORT_UPFACE");
 330         acordeFullSupportUpFace->AddNode(acordeMainSupport,1,new TGeoTranslation("ACOFSB01",supportPosXIn+deltaXA,supportPosY,supportPosZ));
 331         acordeFullSupportUpFace->AddNode(acordeMainSupport,2,new TGeoTranslation("ACOFSB02",supportPosXIn+deltaXB,supportPosY,supportPosZ));
 332         acordeFullSupportUpFace->AddNode(acordeMainSupport,3,new TGeoTranslation("ACOFSB03",supportPosXIn-deltaXA,supportPosY,supportPosZ));
 333         acordeFullSupportUpFace->AddNode(acordeMainSupport,4,new TGeoTranslation("ACOFSB04",supportPosXIn-deltaXB,supportPosY,supportPosZ));
 334         acordeFullSupportUpFace->AddNode(acordeMainSupport,5,new TGeoTranslation("ACOFSB05",supportPosXOut+deltaXA,supportPosY,supportPosZ));
 335         acordeFullSupportUpFace->AddNode(acordeMainSupport,6,new TGeoTranslation("ACOFSB06",supportPosXOut+deltaXB,supportPosY,supportPosZ));
 336         acordeFullSupportUpFace->AddNode(acordeMainSupport,7,new TGeoTranslation("ACOFSB07",supportPosXOut-deltaXA,supportPosY,supportPosZ));
 337         acordeFullSupportUpFace->AddNode(acordeMainSupport,8,new TGeoTranslation("ACOFSB08",supportPosXOut-deltaXB,supportPosY,supportPosZ));
 338
 339         // Put the bars in the main volume acordeFullSupportUpFace
 340
 341         Float_t barPosXIn = constants->CenterModulePositionX(20);
 342         Float_t barPosY = supportPosY-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 343         Float_t barPosZ = 0;
 344         Int_t barIndex = 9;
 345         for(Int_t iBarModule = 20; iBarModule<30; iBarModule+=2)
 346         {
 347                 barPosZ = constants->CenterModulePositionZ(iBarModule);
 348                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex,new TGeoTranslation("ACOFSB09",barPosXIn+deltaXA,barPosY,barPosZ));
 349                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+1,new TGeoTranslation("ACOFSB09",barPosXIn+deltaXB,barPosY,barPosZ));
 350                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+2,new TGeoTranslation("ACOFSB09",barPosXIn-deltaXA,barPosY,barPosZ));
 351                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+3,new TGeoTranslation("ACOFSB09",barPosXIn-deltaXB,barPosY,barPosZ));
 352
 353                 barIndex+=4;
 354         }
 355
 356         Float_t barPosXOut = constants->CenterModulePositionX(30);
 357         for(Int_t iBarModule = 30; iBarModule<40; iBarModule+=2)
 358         {
 359                 barPosZ = constants->CenterModulePositionZ(iBarModule);
 360                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex,new TGeoTranslation("ACOFSB09",barPosXOut+deltaXA,barPosY,barPosZ));
 361                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+1,new TGeoTranslation("ACOFSB09",barPosXOut+deltaXB,barPosY,barPosZ));
 362                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+2,new TGeoTranslation("ACOFSB09",barPosXOut-deltaXA,barPosY,barPosZ));
 363                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+3,new TGeoTranslation("ACOFSB09",barPosXOut-deltaXB,barPosY,barPosZ));
 364
 365                 barIndex+=4;
 366         }
 367
 368         // Supports and bars for the InSide of L3 Magnet
 369
 370         TGeoVolume *acordeFullSupportInFace = new TGeoVolumeAssembly("ACORDE_FULL_SUPPORT_INFACE");
 371         Float_t supportPosXInA = constants->CenterModulePositionX(1)+deltaXA;
 372         Float_t supportPosYInA = 592.017-7.5-5.5;
 373         Float_t x0 = constants->CenterModulePositionX(1);
 374         Float_t y0 = constants->CenterModulePositionY(1);
 375         Float_t theta = -1*TMath::Pi()/4;
 376         Float_t supportPosXInPA = x0+(supportPosXInA-x0)*TMath::Cos(theta)-(supportPosYInA-y0)*TMath::Sin(theta);
 377         Float_t supportPosYInPA = y0+(supportPosYInA-y0)*TMath::Cos(theta)+(supportPosXInA-x0)*TMath::Sin(theta);
 378         Float_t supportPosZInIn = 0;
 379
 380         Float_t supportPosXInB = constants->CenterModulePositionX(1)+deltaXB;
 381         Float_t supportPosXInPB = x0+(supportPosXInB-x0)*TMath::Cos(theta)-(supportPosYInA-y0)*TMath::Sin(theta);
 382         Float_t supportPosYInPB = y0+(supportPosYInA-y0)*TMath::Cos(theta)+(supportPosXInB-x0)*TMath::Sin(theta);
 383
 384         Float_t supportPosXInC = constants->CenterModulePositionX(1)-deltaXA;
 385         Float_t supportPosXInPC = x0+(supportPosXInC-x0)*TMath::Cos(theta)-(supportPosYInA-y0)*TMath::Sin(theta);
 386         Float_t supportPosYInPC = y0+(supportPosYInA-y0)*TMath::Cos(theta)+(supportPosXInC-x0)*TMath::Sin(theta);
 387
 388         Float_t supportPosXInD = constants->CenterModulePositionX(1)-deltaXB;
 389         Float_t supportPosXInPD = x0+(supportPosXInD-x0)*TMath::Cos(theta)-(supportPosYInA-y0)*TMath::Sin(theta);
 390         Float_t supportPosYInPD = y0+(supportPosYInA-y0)*TMath::Cos(theta)+(supportPosXInD-x0)*TMath::Sin(theta);
 391
 392
 393         acordeFullSupportInFace->AddNode(acordeMainSupport,1,new TGeoCombiTrans("ACOFSBIN01",supportPosXInPA,supportPosYInPA,supportPosZInIn,idrotm232));
 394         acordeFullSupportInFace->AddNode(acordeMainSupport,2,new TGeoCombiTrans("ACOFSBIN02",supportPosXInPB,supportPosYInPB,supportPosZInIn,idrotm232));
 395         acordeFullSupportInFace->AddNode(acordeMainSupport,3,new TGeoCombiTrans("ACOFSBIN03",supportPosXInPC,supportPosYInPC,supportPosZInIn,idrotm232));
 396         acordeFullSupportInFace->AddNode(acordeMainSupport,4,new TGeoCombiTrans("ACOFSBIN04",supportPosXInPD,supportPosYInPD,supportPosZInIn,idrotm232));
 397
 398         Float_t supportPosXInE = constants->CenterModulePositionX(10)+deltaXA;
 399         Float_t supportPosYInE = 806.312-7.5-5.5;
 400         Float_t x00 = constants->CenterModulePositionX(10);
 401         Float_t y00 = constants->CenterModulePositionY(10);
 402         Float_t supportPosXInPE = x00+(supportPosXInE-x00)*TMath::Cos(theta)-(supportPosYInE-y00)*TMath::Sin(theta);
 403         Float_t supportPosYInPE = y00+(supportPosYInE-y00)*TMath::Cos(theta)+(supportPosXInE-x00)*TMath::Sin(theta);
 404
 405         Float_t supportPosXInF = constants->CenterModulePositionX(10)+deltaXB;
 406         Float_t supportPosXInPF = x00+(supportPosXInF-x00)*TMath::Cos(theta)-(supportPosYInE-y00)*TMath::Sin(theta);
 407         Float_t supportPosYInPF = y00+(supportPosYInE-y00)*TMath::Cos(theta)+(supportPosXInF-x00)*TMath::Sin(theta);
 408
 409         Float_t supportPosXInG = constants->CenterModulePositionX(10)-deltaXA+100;
 410         Float_t supportPosXInPG = x00+(supportPosXInG-x00)*TMath::Cos(theta)-(supportPosYInE-y00)*TMath::Sin(theta);
 411         Float_t supportPosYInPG = y00+(supportPosYInE-y00)*TMath::Cos(theta)+(supportPosXInG-x00)*TMath::Sin(theta);
 412
 413         acordeFullSupportInFace->AddNode(acordeMainSupport,5,new TGeoCombiTrans("ACOFSBIN05",supportPosXInPE,supportPosYInPE,supportPosZInIn,idrotm232));
 414         acordeFullSupportInFace->AddNode(acordeMainSupport,6,new TGeoCombiTrans("ACOFSBIN06",supportPosXInPF,supportPosYInPF,supportPosZInIn,idrotm232));
 415         acordeFullSupportInFace->AddNode(acordeMainSupport,7,new TGeoCombiTrans("ACOFSBIN07",supportPosXInPG,supportPosYInPG,supportPosZInIn,idrotm232));
 416
 417         // Put the bars in the main volume acordeFullSupportInFace
 418
 419         Int_t barIndexIn = 8;
 420
 421         for (Int_t iBarModule=1; iBarModule<9; iBarModule+=2)
 422         {
 423                 Float_t barPosXInIn = constants->CenterModulePositionX(iBarModule)+deltaXA;
 424                 Float_t barPosYInIn = supportPosYInA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 425                 Float_t barPosZInIn = constants->CenterModulePositionZ(iBarModule);
 426                 Float_t barPosXInP = x0+(barPosXInIn-x0)*TMath::Cos(theta)-(barPosYInIn-y0)*TMath::Sin(theta);
 427                 Float_t barPosYInP = y0+(barPosYInIn-y0)*TMath::Cos(theta)+(barPosXInIn-x0)*TMath::Sin(theta);
 428
 429                 Float_t barPosXInInA = constants->CenterModulePositionX(iBarModule)+deltaXB;
 430                 Float_t barPosYInInA = supportPosYInA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 431                 Float_t barPosZInInA = constants->CenterModulePositionZ(iBarModule);
 432                 Float_t barPosXInPA = x0+(barPosXInInA-x0)*TMath::Cos(theta)-(barPosYInInA-y0)*TMath::Sin(theta);
 433                 Float_t barPosYInPA = y0+(barPosYInInA-y0)*TMath::Cos(theta)+(barPosXInInA-x0)*TMath::Sin(theta);
 434
 435                 Float_t barPosXInInB = constants->CenterModulePositionX(iBarModule)-deltaXA;
 436                 Float_t barPosYInInB = supportPosYInA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 437                 Float_t barPosZInInB = constants->CenterModulePositionZ(iBarModule);
 438                 Float_t barPosXInPB = x0+(barPosXInInB-x0)*TMath::Cos(theta)-(barPosYInInB-y0)*TMath::Sin(theta);
 439                 Float_t barPosYInPB = y0+(barPosYInInB-y0)*TMath::Cos(theta)+(barPosXInInB-x0)*TMath::Sin(theta);
 440
 441                 Float_t barPosXInInC = constants->CenterModulePositionX(iBarModule)-deltaXB;
 442                 Float_t barPosYInInC = supportPosYInA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 443                 Float_t barPosZInInC = constants->CenterModulePositionZ(iBarModule);
 444                 Float_t barPosXInPC = x0+(barPosXInInC-x0)*TMath::Cos(theta)-(barPosYInInC-y0)*TMath::Sin(theta);
 445                 Float_t barPosYInPC = y0+(barPosYInInC-y0)*TMath::Cos(theta)+(barPosXInInC-x0)*TMath::Sin(theta);
 446
 447                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn,new TGeoCombiTrans("ACOFSBIN08",barPosXInP,barPosYInP,barPosZInIn,idrotm232));
 448                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+1,new TGeoCombiTrans("ACOFSBIN09",barPosXInPA,barPosYInPA,barPosZInInA,idrotm232));
 449                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+2,new TGeoCombiTrans("ACOFSBIN10",barPosXInPB,barPosYInPB,barPosZInInB,idrotm232));
 450                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+3,new TGeoCombiTrans("ACOFSBIN11",barPosXInPC,barPosYInPC,barPosZInInC,idrotm232));
 451
 452                 barIndexIn+=4;
 453         }
 454
 455         for (Int_t iBarModule=10; iBarModule<20; iBarModule+=2)
 456         {
 457                 Float_t barPosXInIn = constants->CenterModulePositionX(iBarModule)+deltaXA;
 458                 Float_t barPosYInIn = supportPosYInE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 459                 Float_t barPosZInIn = constants->CenterModulePositionZ(iBarModule);
 460                 Float_t barPosXInP = x00+(barPosXInIn-x00)*TMath::Cos(theta)-(barPosYInIn-y00)*TMath::Sin(theta);
 461                 Float_t barPosYInP = y00+(barPosYInIn-y00)*TMath::Cos(theta)+(barPosXInIn-x00)*TMath::Sin(theta);
 462
 463                 Float_t barPosXInInA = constants->CenterModulePositionX(iBarModule)+deltaXB;
 464                 Float_t barPosYInInA = supportPosYInE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 465                 Float_t barPosZInInA = constants->CenterModulePositionZ(iBarModule);
 466                 Float_t barPosXInPA = x00+(barPosXInInA-x00)*TMath::Cos(theta)-(barPosYInInA-y00)*TMath::Sin(theta);
 467                 Float_t barPosYInPA = y00+(barPosYInInA-y00)*TMath::Cos(theta)+(barPosXInInA-x00)*TMath::Sin(theta);
 468
 469                 Float_t barPosXInInB = constants->CenterModulePositionX(iBarModule)-deltaXA+100;
 470                 Float_t barPosYInInB = supportPosYInE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 471                 Float_t barPosZInInB = constants->CenterModulePositionZ(iBarModule);
 472                 Float_t barPosXInPB = x00+(barPosXInInB-x00)*TMath::Cos(theta)-(barPosYInInB-y00)*TMath::Sin(theta);
 473                 Float_t barPosYInPB = y00+(barPosYInInB-y00)*TMath::Cos(theta)+(barPosXInInB-x00)*TMath::Sin(theta);
 474
 475                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn,new TGeoCombiTrans("ACOFSBIN08",barPosXInP,barPosYInP,barPosZInIn,idrotm232));
 476                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+1,new TGeoCombiTrans("ACOFSBIN09",barPosXInPA,barPosYInPA,barPosZInInA,idrotm232));
 477                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+2,new TGeoCombiTrans("ACOFSBIN10",barPosXInPB,barPosYInPB,barPosZInInB,idrotm232));
 478
 479                 barIndexIn+=4;
 480         }
 481
 482
 483         // Construction of the support and bars for the OutSide
 484
 485
 486         TGeoVolume *acordeFullSupportOutFace = new TGeoVolumeAssembly("ACORDE_FULL_SUPPORT_OUTFACE");
 487         Float_t supportPosXOutA = constants->CenterModulePositionX(45)+deltaXA-90;
 488         Float_t supportPosYOutA = 807.2915-7.5-5.5;
 489         Float_t x000 = constants->CenterModulePositionX(45);
 490         Float_t y000 = constants->CenterModulePositionY(45);
 491         Float_t theta1 = 1*TMath::Pi()/4;
 492
 493         Float_t supportPosXOutPA = x000+(supportPosXOutA-x000)*TMath::Cos(theta1)-(supportPosYOutA-y000)*TMath::Sin(theta1);
 494         Float_t supportPosYOutPA = y000+(supportPosYOutA-y000)*TMath::Cos(theta1)+(supportPosXOutA-x000)*TMath::Sin(theta1);
 495         Float_t supportPosZOutIn = 0;
 496
 497
 498         Float_t supportPosXOutC = constants->CenterModulePositionX(45)-deltaXA;
 499         Float_t supportPosXOutPC = x000+(supportPosXOutC-x000)*TMath::Cos(theta1)-(supportPosYOutA-1-y000)*TMath::Sin(theta1);
 500         Float_t supportPosYOutPC = y000+(supportPosYOutA-1-y000)*TMath::Cos(theta1)+(supportPosXOutC-x000)*TMath::Sin(theta1);
 501
 502         Float_t supportPosXOutD = constants->CenterModulePositionX(45)-deltaXB;
 503         Float_t supportPosXOutPD = x000+(supportPosXOutD-x000)*TMath::Cos(theta1)-(supportPosYOutA-1-y000)*TMath::Sin(theta1);
 504         Float_t supportPosYOutPD = y000+(supportPosYOutA-1-y000)*TMath::Cos(theta1)+(supportPosXOutD-x000)*TMath::Sin(theta1);
 505
 506
 507         acordeFullSupportOutFace->AddNode(acordeMainSupport,1,new TGeoCombiTrans("ACOFSBOUT01",supportPosXOutPA,supportPosYOutPA,supportPosZOutIn,idrotm231));
 508         acordeFullSupportOutFace->AddNode(acordeMainSupport,2,new TGeoCombiTrans("ACOFSBOUT02",supportPosXOutPC,supportPosYOutPC,supportPosZOutIn,idrotm231));
 509         acordeFullSupportOutFace->AddNode(acordeMainSupport,3,new TGeoCombiTrans("ACOFSBOUT03",supportPosXOutPD,supportPosYOutPD,supportPosZOutIn,idrotm231));
 510
 511
 512         Float_t supportPosXOutE = constants->CenterModulePositionX(52)+deltaXA;
 513         Float_t supportPosYOutE = 585.616-7.5-5.5-0.1;
 514         Float_t x0000 = constants->CenterModulePositionX(52);
 515         Float_t y0000 = constants->CenterModulePositionY(52);
 516
 517         Float_t supportPosXOutEP = x0000+(supportPosXOutE-x0000)*TMath::Cos(theta1)-(supportPosYOutE-y0000)*TMath::Sin(theta1);
 518         Float_t supportPosYOutEP = y0000+(supportPosYOutE-y0000)*TMath::Cos(theta1)+(supportPosXOutE-x0000)*TMath::Sin(theta1);
 519
 520         Float_t supportPosXOutF = constants->CenterModulePositionX(52)+deltaXB;
 521
 522         Float_t supportPosXOutFP = x0000+(supportPosXOutF-x0000)*TMath::Cos(theta1)-(supportPosYOutE-y0000)*TMath::Sin(theta1);
 523         Float_t supportPosYOutFP = y0000+(supportPosYOutE-y0000)*TMath::Cos(theta1)+(supportPosXOutF-x0000)*TMath::Sin(theta1);
 524
 525         Float_t supportPosXOutG = constants->CenterModulePositionX(52)-deltaXA;
 526         Float_t supportPosXOutGP = x0000+(supportPosXOutG-x0000)*TMath::Cos(theta1)-(supportPosYOutE-y0000)*TMath::Sin(theta1);
 527         Float_t supportPosYOutGP = y0000+(supportPosYOutE-y0000)*TMath::Cos(theta1)+(supportPosXOutG-x0000)*TMath::Sin(theta1);
 528
 529         Float_t supportPosXOutH = constants->CenterModulePositionX(52)-deltaXB;
 530         Float_t supportPosXOutHP = x0000+(supportPosXOutH-x0000)*TMath::Cos(theta1)-(supportPosYOutE-0.4-y0000)*TMath::Sin(theta1);
 531         Float_t supportPosYOutHP = y0000+(supportPosYOutE-0.4-y0000)*TMath::Cos(theta1)+(supportPosXOutH-x0000)*TMath::Sin(theta1);
 532
 533
 534         acordeFullSupportOutFace->AddNode(acordeMainSupport,4,new TGeoCombiTrans("ACOFSBOUT04",supportPosXOutEP,supportPosYOutEP,supportPosZOutIn,idrotm231));
 535         acordeFullSupportOutFace->AddNode(acordeMainSupport,5,new TGeoCombiTrans("ACOFSBOUT05",supportPosXOutFP,supportPosYOutFP,supportPosZOutIn,idrotm231));
 536         acordeFullSupportOutFace->AddNode(acordeMainSupport,6,new TGeoCombiTrans("ACOFSBOUT06",supportPosXOutGP,supportPosYOutGP,supportPosZOutIn,idrotm231));
 537         acordeFullSupportOutFace->AddNode(acordeMainSupport,7,new TGeoCombiTrans("ACOFSBOUT07",supportPosXOutHP,supportPosYOutHP,supportPosZOutIn,idrotm231));
 538
 539         // Put the bars of the PutFace Side 2 L3-Magnet
 540
 541
 542         Int_t indexBar0=8;
 543         for(Int_t iAcoBar = 40;iAcoBar < 50 ; iAcoBar+=2)
 544         {
 545                 Float_t barPosXOutIn = constants->CenterModulePositionX(iAcoBar)+deltaXA-90;
 546                 Float_t barPosYOutIn = supportPosYOutA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 547                 Float_t barPosZOutIn = constants->CenterModulePositionZ(iAcoBar);
 548                 Float_t barPosXOutP = x000+(barPosXOutIn-x000)*TMath::Cos(theta1)-(barPosYOutIn-y000)*TMath::Sin(theta1);
 549                 Float_t barPosYOutP = y000+(barPosYOutIn-y000)*TMath::Cos(theta1)+(barPosXOutIn-x000)*TMath::Sin(theta1);
 550
 551                 Float_t barPosXOutInA = constants->CenterModulePositionX(iAcoBar)-deltaXA;
 552                 Float_t barPosYOutInA = supportPosYOutA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5-1.;
 553                 Float_t barPosZOutInA = constants->CenterModulePositionZ(iAcoBar);
 554                 Float_t barPosXOutPA = x000+(barPosXOutInA-x000)*TMath::Cos(theta1)-(barPosYOutInA-y000)*TMath::Sin(theta1);
 555                 Float_t barPosYOutPA = y000+(barPosYOutInA-y000)*TMath::Cos(theta1)+(barPosXOutInA-x000)*TMath::Sin(theta1);
 556
 557
 558                 Float_t barPosXOutInB = constants->CenterModulePositionX(iAcoBar)-deltaXB;
 559                 Float_t barPosYOutInB = supportPosYOutA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5-1.;
 560                 Float_t barPosZOutInB = constants->CenterModulePositionZ(iAcoBar);
 561                 Float_t barPosXOutPB = x000+(barPosXOutInB-x000)*TMath::Cos(theta1)-(barPosYOutInB-y000)*TMath::Sin(theta1);
 562                 Float_t barPosYOutPB = y000+(barPosYOutInB-y000)*TMath::Cos(theta1)+(barPosXOutInB-x000)*TMath::Sin(theta1);
 563
 564                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutP,barPosYOutP,barPosZOutIn,idrotm231));
 565                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+1,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPA,barPosYOutPA,barPosZOutInA,idrotm231));
 566                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+2,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPB,barPosYOutPB,barPosZOutInB,idrotm231));
 567
 568                 indexBar0+=4;
 569         }
 570         for(Int_t iAcoBar = 51;iAcoBar < 54 ; iAcoBar+=2)
 571         {
 572
 573                 Float_t barPosXOutInC = constants->CenterModulePositionX(iAcoBar)+deltaXA;
 574                 Float_t barPosYOutInC = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 575                 Float_t barPosZOutInC = constants->CenterModulePositionZ(iAcoBar);
 576                 Float_t barPosXOutPC = x0000+(barPosXOutInC-x0000)*TMath::Cos(theta1)-(barPosYOutInC-y0000)*TMath::Sin(theta1);
 577                 Float_t barPosYOutPC = y0000+(barPosYOutInC-y0000)*TMath::Cos(theta1)+(barPosXOutInC-x0000)*TMath::Sin(theta1);
 578
 579
 580                 Float_t barPosXOutInD = constants->CenterModulePositionX(iAcoBar)+deltaXB;
 581                 Float_t barPosYOutInD = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 582                 Float_t barPosZOutInD = constants->CenterModulePositionZ(iAcoBar);
 583                 Float_t barPosXOutPD = x0000+(barPosXOutInD-x0000)*TMath::Cos(theta1)-(barPosYOutInD-y0000)*TMath::Sin(theta1);
 584                 Float_t barPosYOutPD = y0000+(barPosYOutInD-y0000)*TMath::Cos(theta1)+(barPosXOutInD-x0000)*TMath::Sin(theta1);
 585
 586
 587                 Float_t barPosXOutInE = constants->CenterModulePositionX(iAcoBar)-deltaXA;
 588                 Float_t barPosYOutInE = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 589                 Float_t barPosZOutInE = constants->CenterModulePositionZ(iAcoBar);
 590                 Float_t barPosXOutPE = x0000+(barPosXOutInE-x0000)*TMath::Cos(theta1)-(barPosYOutInE-y0000)*TMath::Sin(theta1);
 591                 Float_t barPosYOutPE = y0000+(barPosYOutInE-y0000)*TMath::Cos(theta1)+(barPosXOutInE-x0000)*TMath::Sin(theta1);
 592                 Float_t barPosXOutInF = constants->CenterModulePositionX(iAcoBar)-deltaXB;
 593                 Float_t barPosYOutInF = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 594                 Float_t barPosZOutInF = constants->CenterModulePositionZ(iAcoBar);
 595                 Float_t barPosXOutPF = x0000+(barPosXOutInF-x0000)*TMath::Cos(theta1)-(barPosYOutInF-0.4-y0000)*TMath::Sin(theta1);
 596                 Float_t barPosYOutPF = y0000+(barPosYOutInF-0.4-y0000)*TMath::Cos(theta1)+(barPosXOutInF-x0000)*TMath::Sin(theta1);
 597
 598                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPC,barPosYOutPC,barPosZOutInC,idrotm231));
 599                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+1,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPD,barPosYOutPD,barPosZOutInD,idrotm231));
 600                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+2,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPE,barPosYOutPE,barPosZOutInE,idrotm231));
 601                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+3,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPF,barPosYOutPF,barPosZOutInF,idrotm231));
 602                 indexBar0+=4;
 603         }
 604
 605
 606         for(Int_t iAcoBar = 57;iAcoBar < 58 ; iAcoBar+=2)
 607         {
 608
 609                 Float_t barPosXOutInC = constants->CenterModulePositionX(iAcoBar)+deltaXA;
 610                 Float_t barPosYOutInC = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 611                 Float_t barPosZOutInC = constants->CenterModulePositionZ(iAcoBar);
 612                 Float_t barPosXOutPC = x0000+(barPosXOutInC-x0000)*TMath::Cos(theta1)-(barPosYOutInC-y0000)*TMath::Sin(theta1);
 613                 Float_t barPosYOutPC = y0000+(barPosYOutInC-y0000)*TMath::Cos(theta1)+(barPosXOutInC-x0000)*TMath::Sin(theta1);
 614
 615
 616                 Float_t barPosXOutInD = constants->CenterModulePositionX(iAcoBar)+deltaXB;
 617                 Float_t barPosYOutInD = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 618                 Float_t barPosZOutInD = constants->CenterModulePositionZ(iAcoBar);
 619                 Float_t barPosXOutPD = x0000+(barPosXOutInD-x0000)*TMath::Cos(theta1)-(barPosYOutInD-y0000)*TMath::Sin(theta1);
 620                 Float_t barPosYOutPD = y0000+(barPosYOutInD-y0000)*TMath::Cos(theta1)+(barPosXOutInD-x0000)*TMath::Sin(theta1);
 621
 622
 623                 Float_t barPosXOutInE = constants->CenterModulePositionX(iAcoBar)-deltaXA;
 624                 Float_t barPosYOutInE = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 625                 Float_t barPosZOutInE = constants->CenterModulePositionZ(iAcoBar);
 626                 Float_t barPosXOutPE = x0000+(barPosXOutInE-x0000)*TMath::Cos(theta1)-(barPosYOutInE-y0000)*TMath::Sin(theta1);
 627                 Float_t barPosYOutPE = y0000+(barPosYOutInE-y0000)*TMath::Cos(theta1)+(barPosXOutInE-x0000)*TMath::Sin(theta1);
 628                 Float_t barPosXOutInF = constants->CenterModulePositionX(iAcoBar)-deltaXB;
 629                 Float_t barPosYOutInF = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 630                 Float_t barPosZOutInF = constants->CenterModulePositionZ(iAcoBar);
 631                 Float_t barPosXOutPF = x0000+(barPosXOutInF-x0000)*TMath::Cos(theta1)-(barPosYOutInF-0.4-y0000)*TMath::Sin(theta1);
 632                 Float_t barPosYOutPF = y0000+(barPosYOutInF-0.4-y0000)*TMath::Cos(theta1)+(barPosXOutInF-x0000)*TMath::Sin(theta1);
 633
 634                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPC,barPosYOutPC,barPosZOutInC,idrotm231));
 635                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+1,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPD,barPosYOutPD,barPosZOutInD,idrotm231));
 636                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+2,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPE,barPosYOutPE,barPosZOutInE,idrotm231));
 637                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+3,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPF,barPosYOutPF,barPosZOutInF,idrotm231));
 638                 indexBar0+=4;
 639         }
 640
 641
 642         Float_t barPosXOutInC = constants->CenterModulePositionX(52)+deltaXA;
 643         Float_t barPosYOutInC = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 644         Float_t barPosZOutInC = constants->CenterModulePositionZ(55);
 645         Float_t barPosXOutPC = x0000+(barPosXOutInC-x0000)*TMath::Cos(theta1)-(barPosYOutInC-y0000)*TMath::Sin(theta1);
 646         Float_t barPosYOutPC = y0000+(barPosYOutInC-y0000)*TMath::Cos(theta1)+(barPosXOutInC-x0000)*TMath::Sin(theta1);
 647
 648
 649         Float_t barPosXOutInD = constants->CenterModulePositionX(52)+deltaXB;
 650         Float_t barPosYOutInD = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 651         Float_t barPosXOutPD = x0000+(barPosXOutInD-x0000)*TMath::Cos(theta1)-(barPosYOutInD-y0000)*TMath::Sin(theta1);
 652         Float_t barPosYOutPD = y0000+(barPosYOutInD-y0000)*TMath::Cos(theta1)+(barPosXOutInD-x0000)*TMath::Sin(theta1);
 653
 654
 655         Float_t barPosXOutInE = constants->CenterModulePositionX(52)-deltaXA;
 656         Float_t barPosYOutInE = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 657         Float_t barPosXOutPE = x0000+(barPosXOutInE-x0000)*TMath::Cos(theta1)-(barPosYOutInE-y0000)*TMath::Sin(theta1);
 658         Float_t barPosYOutPE = y0000+(barPosYOutInE-y0000)*TMath::Cos(theta1)+(barPosXOutInE-x0000)*TMath::Sin(theta1);
 659         Float_t barPosXOutInF = constants->CenterModulePositionX(52)-deltaXB;
 660         Float_t barPosYOutInF = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 661         Float_t barPosXOutPF = x0000+(barPosXOutInF-x0000)*TMath::Cos(theta1)-(barPosYOutInF-0.4-y0000)*TMath::Sin(theta1);
 662         Float_t barPosYOutPF = y0000+(barPosYOutInF-0.4-y0000)*TMath::Cos(theta1)+(barPosXOutInF-x0000)*TMath::Sin(theta1);
 663
 664         acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPC,barPosYOutPC,barPosZOutInC,idrotm231));
 665         acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+1,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPD,barPosYOutPD,barPosZOutInC,idrotm231));
 666         acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+2,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPE,barPosYOutPE,barPosZOutInC,idrotm231));
 667         acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+3,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPF,barPosYOutPF,barPosZOutInC,idrotm231));
 668
 669
 670
 671
 672
 673         supportBars->AddNode(acordeFullSupportUpFace,1);
 674         supportBars->AddNode(acordeFullSupportInFace,2);
 675         supportBars->AddNode(acordeFullSupportOutFace,3);
 676         acorde->AddNode(acordeModules,1);
 677         acorde->AddNode(supportBars,2);
 678         alice->AddNode(acorde,1);//---> put volume of ACORDE over ALICE's volume
 679
 680
 681
 682 }
 683 //__________________________________________________________________________
 684
 685 void AliACORDEv1::Init()
 686 {
 687   // Initialise L3 magnet after it has been built
 688   Int_t i;
 689   if(AliLog::GetGlobalDebugLevel()>0) {
 690     printf("\n%s: ",ClassName());
 691     for(i=0;i<35;i++) printf("*");
 692     printf(" ACORDEv1_INIT ");
 693     for(i=0;i<35;i++) printf("*");
 694     printf("\n%s: ",ClassName());
 695     // Here the ACORDEv initialisation code (if any!)
 696     for(i=0;i<80;i++) printf("*");
 697     printf("\n");
 698   }
 699  // AliACORDE::Init();
 700 }
 701 //____________________________________________________________________________
 702 void AliACORDEv1::StepManager()
 703 {
 704
 705   //
 706   // Called for every step in the Cosmic Ray Trigger
 707   //
 708
 709
 710   // volume:
 711   //  [0] = module number 1-60 (1==>(0-0), 60 (5-9)
 712   //  [1] = Plastic number: 0 (down) to 1 (up)
 713   static Int_t   vol[2];
 714   //
 715   // hit
 716   // [0] = PID
 717   // [1-3] = x, y, z
 718   // [4] = time
 719   // [5-7] = px, py, pz
 720   // [8] = energy
 721   // [9] = energy loss
 722   // [10] = length of track through plastic
 723   static Float_t hits[11];
 724
 725   // local static variables
 726   static Float_t eloss;
 727   static Float_t step;
 728   // scintillator volume
 729  static Int_t idScint = gMC->VolId("ACORDESCINTILLATORMODULE");
 730   // local variables
 731   Int_t copy;
 732   TLorentzVector pos;
 733   TLorentzVector mom;
 734
 735   // only charged tracks
 736   if ( !gMC->TrackCharge() || !gMC->IsTrackAlive() ) return;
 737
 738   // only in sensitive material
 739   if (gMC->CurrentVolID(copy) == idScint) {
 740
 741     step  += gMC->TrackStep();
 742     eloss += gMC->Edep();
 743     // set all hit variables except eloss which is resetted
 744     // set volume variables
 745     if (gMC->IsTrackEntering()) {
 746       eloss = 0.0;
 747       step = 0.0;
 748       gMC->TrackPosition(pos);
 749       gMC->TrackMomentum(mom);
 750       // hit
 751       // [0] = PID
 752       // [1-3] = x, y, z
 753       // [4] = time
 754       // [5-7] = px, py, pz
 755       // [8] = energy
 756       // [9] = energy loss
 757       hits[0]  = (Float_t ) gMC->TrackPid();
 758
 759
 760       hits[1] = pos[0];
 761       hits[2] = pos[1];
 762       hits[3] = pos[2];
 763       hits[4] = gMC->TrackTime();
 764       hits[5] = mom[0];
 765       hits[6] = mom[1];
 766       hits[7] = mom[2];
 767       hits[8] = gMC->Etot();
 768       // volume:
 769       //  [0] = module number 1-60 (1==>(0-0), 60 (5-9)
 770       //  [1] = Plastic number: 0 (down) to 1 (up)
 771       Int_t copyPlastic; // plastic: down=1, up=2
 772       Int_t copyModule; // module: 1-60
 773       gMC->CurrentVolID(copyPlastic);
 774       gMC->CurrentVolOffID(1, copyModule);
 775       // module
 776       vol[0] = copyModule;
 777       // plastic: 0 = down, 1 = up
 778       vol[1] = copyPlastic - 4 ; // !!!!!!!
 779     // vol[1] = copyPlastic;
 780     } // end if gMC->IsTrackEntering()
 781
 782     // set hit[9] = total energy loss and book hit
 783     if( gMC->IsTrackExiting() ||
 784         gMC->IsTrackStop() ||
 785         gMC->IsTrackDisappeared()){
 786       hits[9] = eloss;
 787       hits[10] = step;
 788       eloss = 0.0;
 789       step = 0.0;
 790       AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits);
 791      }
 792   }
 793
 794
 795
 796 }
 797
 798 //_____________________________________________________________________________
 799 void AliACORDEv1::AddHit(Int_t track, Int_t *vol, Float_t *hits)
 800 {
 801   //
 802   // Add an ACORDE hit
 803   //
 804   TClonesArray &lhits = *fHits;
 805   new(lhits[fNhits++]) AliACORDEhit(fIshunt,track,vol,hits);
 806 }
 807
 808 //_____________________________________________________________________________
 809 void AliACORDEv1::AddDigits(Int_t* track, Int_t module, Float_t time)
 810 {
 811
 812   // Adds Digit
 813
 814   TClonesArray &ldigits = *fDigits;
 815   new(ldigits[fNdigits++]) AliACORDEdigit(track,module,time);
 816 }
 817 //_____________________________________________________________________________
 818
 819 void AliACORDEv1::MakeBranch(Option_t *option)
 820 {
 821 // Creates new branches in the current Root Tree
 822
 823   char branchname[10];
 824   sprintf(branchname,"%s",GetName());
 825   AliDebug(2,Form("fBufferSize = %d",fBufferSize));
 826   const char *cH = strstr(option,"H");
 827   if (fHits   && fLoader->TreeH() && cH) {
 828     fLoader->TreeH()->Branch(branchname,&fHits, fBufferSize);
 829     AliDebug(2,Form("Making Branch %s for hits",branchname));
 830   }
 831   const char *cD = strstr(option,"D");
 832   if (fDigits   && fLoader->TreeD() && cD) {
 833     fLoader->TreeD()->Branch(branchname,&fDigits, fBufferSize);
 834     AliDebug(2,Form("Making Branch %s for digits",branchname));
 835   }
 836 }
 837
 838 //_____________________________________________________________________________
 839 void AliACORDEv1::AddAlignableVolumes() const
 840 {
 841   //
 842   // Create entries for alignable volumes associating the symbolic volume
 843   // name with the corresponding volume path. Needs to be syncronized with
 844   // eventual changes in the geometry.
 845   //
 846
 847         // The alignable volumes are only the "ACORDE_MODULE_%d"
 848         //
 849         //      Structure of ACORDE's Geometry
 850         //
 851         //      ALIC_1
 852         //          |---> ACORDE_1
 853         //                      |----> ALL_ACORDE_MODULES_1/ACORDE_MODULE_%d (d:0->to->59)
 854         //                      |----> ACORDE_SUPPORT_BARS_2    |--> BARS&SUPPORTS
 855         //
 856         //     Send comments to: Mario Rodriguez Cahuantzi <mrodrigu@mail.cern.ch>
 857
 858         TString vpstr1 = "ALIC_1/ACORDE_1/ALL_ACORDE_MODULES_1/ACORDE_MODULE_";
 859         TString snstr1 = "ACORDE/Array";
 860         TString volpath, symname;
 861         for(Int_t dy=0; dy<60 ; dy++)
 862         {
 863                 volpath = vpstr1;
 864                 volpath += dy;
 865                 symname = snstr1;
 866                 symname += dy;
 867                 if(!gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data()))
 868                 AliFatal(Form("Alignable entry %s not created. Volume path %s not valid", symname.Data(),volpath.Data()));
 869         }
 870 }