ACORDE/AliACORDEv1.cxx

   1 /**************************************************************************
   2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
   3  *                                                                        *
   4  * Author: The ALICE Off-line Project.                                    *
   5  * Contributors are mentioned in the code where appropriate.              *
   6  *                                                                        *
   7  * Permission to use, copy, modify and distribute this software and its   *
   8  * documentation strictly for non-commercial purposes is hereby granted   *
   9  * without fee, provided that the above copyright notice appears in all   *
  10  * copies and that both the copyright notice and this permission notice   *
  11  * appear in the supporting documentation. The authors make no claims     *
  12  * about the suitability of this software for any purpose. It is          *
  13  * provided "as is" without express or implied warranty.                  *
  14  **************************************************************************/
  15
  16 /* $Id: AliACORDEv1.cxx,v 1.2 2007/12/03 08:40:00 hristov Exp $ */
  17
  18 ///////////////////////////////////////////////////////////////////////////////
  19 //                                                                           //
  20 // ALICE Cosmic Ray Trigger                                                  //
  21 //                                                                           //
  22 //  This class contains the functions for final version of the ALICE Cosmic  //
  23 //  Ray Trigger. This version will be used to simulation comic rays in alice //
  24 //  with all the detectors. It includes the last survey of 2009.             //
  25 //  It include geometry and hits (position and momentum)                     //
  26 //                                                                           //
  27 //   Author: Mario Rodriguez Cahuantzi, FCFM-BUAP, Puebla, Pue. Mexico       //
  28 //                                                                           //
  29 //                  Send comments to:                                        //
  30 //                                                                           //
  31 //      Arturo Fernandez Tellez         <afernand@fcfm.buap.mx>              //
  32 //      Eleazar Cuautle Flores          <ecuautle@nucleares.unam.mx>         //
  33 //      Mario Rodriguez Cahuantzi       <mrodrigu@mail.cern.ch>              //
  34 //                                                                           //
  35 //                      Puebla, Pue. Mexico December 2007                    //
  36 //                                                                           //
  37 //      Last Update: Nov. 17th 2009                                          //
  38 //      Mario Rodriguez Cahuantzi                                            //
  39 ///////////////////////////////////////////////////////////////////////////////
  40
  41
  42 #include <Riostream.h>
  43 #include <TGeoMatrix.h>
  44 #include <TMath.h>
  45 #include <TString.h>
  46 #include <TSystem.h>
  47 #include <TTree.h>
  48
  49 #include "AliConst.h"
  50 #include "AliRun.h"
  51
  52 #include "TGeoManager.h"
  53 #include "TGeoVolume.h"
  54 #include "TGeoPcon.h"
  55 #include "TGeoPgon.h"
  56 #include "TGeoTrd1.h"
  57 #include "TGeoCompositeShape.h"
  58 #include "TGeoPara.h"
  59
  60 #include "AliACORDEv1.h"
  61 #include <TClonesArray.h>
  62 #include <TLorentzVector.h>
  63 #include <TVirtualMC.h>
  64 #include <TPDGCode.h>
  65
  66 #include "AliRun.h"
  67 #include "AliConst.h"
  68 #include "AliACORDEhit.h"
  69 #include "AliACORDEConstants.h"
  70 #include "AliMC.h"
  71 #include "AliLog.h"
  72
  73 ClassImp(AliACORDEv1)
  74
  75 //_____________________________________________________________________________
  76 AliACORDEv1::AliACORDEv1()
  77   : AliACORDE()
  78 {
  79   //
  80   // Default constructor
  81   fIshunt = 0;
  82   fHits = 0;
  83   //
  84 }
  85 //_____________________________________________________________________________
  86 AliACORDEv1::AliACORDEv1(const char *name, const char *title)
  87   : AliACORDE(name, title)
  88 {
  89   //
  90   // Standard constructor
  91   //
  92   fIshunt = 1; // All hits are associated with primary particles
  93   fHits =  new TClonesArray("AliACORDEhit",400);
  94   gAlice->GetMCApp()->AddHitList(fHits);
  95 }
  96 //_____________________________________________________________________________
  97 AliACORDEv1::~AliACORDEv1()
  98 {
  99   //
 100   // Default destructor
 101   //
 102 }
 103 //_____________________________________________________________________________
 104 void AliACORDEv1::CreateGeometry()
 105 {
 106   CreateAcorde();
 107 }
 108 void AliACORDEv1::CreateAcorde()
 109 {
 110
 111         // Call the global constants for the Modules
 112
 113         AliACORDEConstants* constants = AliACORDEConstants::Instance();
 114
 115         // Get the Alice Volume
 116
 117         TGeoVolume *alice = gGeoManager->GetVolume("ALIC");
 118
 119         // Define some materials & medium
 120
 121         //*** Aluminium ***
 122
 123         TGeoMedium* aluminium = gGeoManager->GetMedium("ACORDE_ALU_C0");
 124
 125         //*** Scintillator ***
 126
 127         TGeoMedium* scintillator = gGeoManager->GetMedium("ACORDE_CPV scint.1");
 128
 129         //Define the mother volume for the ACORDE detector
 130
 131         TGeoVolume *acorde = new TGeoVolumeAssembly("ACORDE");
 132
 133
 134         // Define 2 main-daughter volumes for ACORDE
 135
 136         TGeoVolume *supportBars = new TGeoVolumeAssembly("ACORDE_SUPPORTS_BARS");
 137         TGeoVolume *acordeModules = new TGeoVolumeAssembly("ALL_ACORDE_MODULES");
 138
 139
 140         // Define rotation Matrix for Side's faces in Alice
 141
 142         TGeoRotation *idrotm231 = new TGeoRotation("idrotm231",90, 45, 90, 135, 0, 0);
 143         TGeoRotation *idrotm232 = new TGeoRotation("idrotm232",90, 315, 90, 45, 0, 0);
 144
 145         // Begin the Geometry for ACORDE
 146
 147         // *** Definition of ACORDE's Modules ***
 148
 149         // Define Measures of ACORDE's Modules
 150
 151         Float_t acoFrameBox1[3],acoFrameBox2[3];
 152
 153         acoFrameBox1[0] = constants->ModuleLength()/2;
 154         acoFrameBox1[1] = constants->ModuleHeight()/2;
 155         acoFrameBox1[2] = 2.50;
 156
 157         acoFrameBox2[0] = 20.0;
 158         acoFrameBox2[1] = constants->ModuleHeight()/2;
 159         acoFrameBox2[2] = 10.0;
 160
 161         // Define Measures of Scintillators
 162
 163         Float_t acoScinBox[3];
 164         acoScinBox[0] = constants->PlasticLength()/2;
 165         acoScinBox[1] = constants->PlasticHeight()/2;
 166         acoScinBox[2] = constants->PlasticWidth()/2;
 167
 168
 169         // Create the Modules of ACORDE, 1 aluminium frame and two scintillator plastics
 170
 171         //*** Aluminium frame ***
 172
 173         TGeoBBox *acordeModFrameBoxL = new TGeoBBox("acordeModFrameBoxL",acoFrameBox1[0],acoFrameBox1[1],acoFrameBox1[2]);
 174         TGeoBBox *acordeModFrameBoxH = new TGeoBBox("acordeModFrameBoxH",acoFrameBox2[0],acoFrameBox2[1],acoFrameBox2[2]);
 175         TGeoVolume *acordeModFrameVolumeL = new TGeoVolume("ACORDEMODFRAMEVOLUMEL",acordeModFrameBoxL,aluminium);
 176         TGeoVolume *acordeModFrameVolumeH = new TGeoVolume("ACORDEMODFRAMEVOLUMEH",acordeModFrameBoxH,aluminium);
 177
 178
 179         //*** Scintillators ***
 180
 181         TGeoBBox *acordeScintillatorBox = new TGeoBBox("acordeScintillatorBox",acoScinBox[0],acoScinBox[1],acoScinBox[2]);
 182         TGeoVolume *acordeScintillatorVolume = new TGeoVolume("ACORDESCINTILLATORMODULE",acordeScintillatorBox,scintillator);
 183
 184
 185         // Here I create a single ACORDE module and then we make 60 copies of it
 186
 187         TGeoVolume *acordeSingleModule = new TGeoVolumeAssembly("ACORDE_MODULE");
 188         acordeSingleModule->AddNode(acordeModFrameVolumeL,1,new TGeoTranslation("acordeFrame_01",0,0,12.5));
 189         acordeSingleModule->AddNode(acordeModFrameVolumeL,2,new TGeoTranslation("acordeFrame_02",0,0,-12.5));
 190         acordeSingleModule->AddNode(acordeModFrameVolumeH,3,new TGeoTranslation("acordeFrame_03",130,0,0));
 191         acordeSingleModule->AddNode(acordeModFrameVolumeH,4,new TGeoTranslation("acordeFrame_04",-130,0,0));
 192         acordeSingleModule->AddNode(acordeScintillatorVolume,5, new TGeoTranslation("acordeScintillator_01",0,1,0));
 193         acordeSingleModule->AddNode(acordeScintillatorVolume,6, new TGeoTranslation("acordeScintillator_01",0,-1,0));
 194
 195         // Put the Modules of In-Face
 196
 197         for(Int_t iAcordeModule=1;iAcordeModule<9;iAcordeModule++)
 198         {
 199
 200                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 201                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 202                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 203
 204                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,
 205                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm232));
 206         }
 207
 208         for(Int_t iAcordeModule=10;iAcordeModule<20;iAcordeModule++)
 209         {
 210                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 211                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 212                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 213
 214                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,
 215                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm232));
 216         }
 217
 218         // Put he Modules of Up-Face
 219
 220         for(Int_t iAcordeModule=20;iAcordeModule<40;iAcordeModule++)
 221         {
 222                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 223                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 224                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 225
 226                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,new TGeoTranslation("aco01",posx,posy,posz));
 227         }
 228
 229         // Put the Modules of Out-Face
 230
 231         for(Int_t iAcordeModule=40;iAcordeModule<50;iAcordeModule++)
 232         {
 233                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 234                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 235                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 236
 237                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,
 238                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm231));
 239         }
 240
 241         // Put the Modules of Out-Face
 242
 243         for(Int_t iAcordeModule=51;iAcordeModule<59;iAcordeModule++)
 244         {
 245                 Float_t posx = constants->CenterModulePositionX(iAcordeModule);
 246                 Float_t posy = constants->CenterModulePositionY(iAcordeModule);
 247                 Float_t posz = constants->CenterModulePositionZ(iAcordeModule);
 248                 acordeModules->AddNode(acordeSingleModule,iAcordeModule,
 249                                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm231));
 250         }
 251
 252         // Put the 4-central modules (Old-ITS modules)
 253         if (Get4CentralModulesGeometry())
 254         {
 255                 acordeModules->AddNode(acordeSingleModule,0,
 256                         new TGeoTranslation("Mod0_0",constants->CenterModulePositionX(0),constants->CenterModulePositionY(0),constants->CenterModulePositionZ(0)));
 257                 acordeModules->AddNode(acordeSingleModule,9,
 258                         new TGeoTranslation("Mod0_9",constants->CenterModulePositionX(9),constants->CenterModulePositionY(9),constants->CenterModulePositionZ(9)));
 259                 acordeModules->AddNode(acordeSingleModule,50,
 260                         new TGeoTranslation("Mod0_50",constants->CenterModulePositionX(50),constants->CenterModulePositionY(50),constants->CenterModulePositionZ(50)));
 261                 acordeModules->AddNode(acordeSingleModule,59,
 262                         new TGeoTranslation("Mod0_59",constants->CenterModulePositionX(59),constants->CenterModulePositionY(59),constants->CenterModulePositionZ(59)));
 263         }
 264
 265         // Create a dummy support & bars of Aluminium (it doesn't exist a survey of this structure)
 266
 267         Float_t boxLongSupport[3],boxThinSupport[3];
 268
 269         boxLongSupport[0]=10.0;
 270         boxLongSupport[1]=0.5;
 271         boxLongSupport[2]=500.0;
 272
 273         boxThinSupport[0]=1.0;
 274         boxThinSupport[1]=5.0;
 275         boxThinSupport[2]=500.0;
 276
 277         TGeoBBox *acordeLongSupport = new TGeoBBox("ACORDELONGSUPPORT",boxLongSupport[0],boxLongSupport[1],boxLongSupport[2]);
 278         TGeoBBox *acordeThinSupport = new TGeoBBox("ACORDETHINSUPPORT",boxThinSupport[0],boxThinSupport[1],boxThinSupport[2]);
 279
 280         TGeoVolume *acordeLSupport = new TGeoVolume("ACORDELS",acordeLongSupport,aluminium);
 281         TGeoVolume *acordeTSupport = new TGeoVolume("ACORDETS",acordeThinSupport,aluminium);
 282         TGeoVolume *acordeMainSupport = new TGeoVolumeAssembly("ACORDE_SUPPORT");
 283         acordeMainSupport->AddNode(acordeLSupport,1,new TGeoTranslation("ACOLSA",0,5.5,0));
 284         acordeMainSupport->AddNode(acordeLSupport,2,new TGeoTranslation("ACOLSB",0,-7.5,0));
 285         acordeMainSupport->AddNode(acordeTSupport,3);
 286
 287         // Set the values for the bars support
 288
 289         Float_t boxSingleBar[3];
 290         boxSingleBar[0]=10;
 291         boxSingleBar[1]=37;//36.722; // Correction to avoid overlaps with the L3 magnet
 292         boxSingleBar[2]=10;
 293
 294         Float_t boxUnionUp[3];
 295         boxUnionUp[0]=10;
 296         boxUnionUp[1]=0.5;
 297         boxUnionUp[2]=15;
 298
 299         Float_t boxUnionDown[3];
 300         boxUnionDown[0]=20;
 301         boxUnionDown[1]=1;
 302         boxUnionDown[2]=20;
 303
 304         // Volume and Box for the bar
 305
 306         TGeoBBox *acordeSingleBarSupport = new TGeoBBox("ACORDESBARS",boxSingleBar[0],boxSingleBar[1],boxSingleBar[2]);
 307         TGeoVolume *acordeBarSupport = new TGeoVolume("ACORDEBARSUPPORT",acordeSingleBarSupport,aluminium);
 308
 309         // Volume and Box for the bar union with the long support (Up-with supports and Down with L3 magnet)
 310
 311         TGeoBBox *acordeSingleBoxUnionUp = new TGeoBBox("ACORDEBUP",boxUnionUp[0],boxUnionUp[1],boxUnionUp[2]);
 312         TGeoVolume *acordeBoxUnionUp = new TGeoVolume("ACORDEBOXUNIONUP",acordeSingleBoxUnionUp,aluminium);
 313
 314         TGeoBBox *acordeSingleBoxUnionDown = new TGeoBBox("ACORDEBDOWN",boxUnionDown[0],boxUnionDown[1],boxUnionDown[2]);
 315         TGeoVolume *acordeBoxUnionDown = new TGeoVolume("ACORDEBOXUNIONDOWN",acordeSingleBoxUnionDown,aluminium);
 316
 317         TGeoVolume *acordeMainBar = new TGeoVolumeAssembly("ACORDE_BAR");
 318         acordeMainBar->AddNode(acordeBoxUnionUp,1,new TGeoTranslation("ACOBAR01",0,boxSingleBar[1]+boxUnionUp[1],0));
 319         acordeMainBar->AddNode(acordeBarSupport,2);
 320         acordeMainBar->AddNode(acordeBoxUnionDown,3,new TGeoTranslation("ACOBAR01",0,-boxSingleBar[1]-boxUnionDown[1],0));
 321
 322         // Volume for the Full support (supports and bars) UP face of L3 Magnet
 323         Float_t supportPosXIn = constants->CenterModulePositionX(20);
 324         Float_t supportPosY = 859.044-7.5-5.5; // Minimum module position Y less the heigh of the support
 325         Float_t supportPosZ = 0;
 326         Float_t supportPosXOut = constants->CenterModulePositionX(30);
 327         Float_t deltaXA = 120.;
 328         Float_t deltaXB = 60.;
 329
 330         TGeoVolume *acordeFullSupportUpFace = new TGeoVolumeAssembly("ACORDE_FULL_SUPPORT_UPFACE");
 331         acordeFullSupportUpFace->AddNode(acordeMainSupport,1,new TGeoTranslation("ACOFSB01",supportPosXIn+deltaXA,supportPosY,supportPosZ));
 332         acordeFullSupportUpFace->AddNode(acordeMainSupport,2,new TGeoTranslation("ACOFSB02",supportPosXIn+deltaXB,supportPosY,supportPosZ));
 333         acordeFullSupportUpFace->AddNode(acordeMainSupport,3,new TGeoTranslation("ACOFSB03",supportPosXIn-deltaXA,supportPosY,supportPosZ));
 334         acordeFullSupportUpFace->AddNode(acordeMainSupport,4,new TGeoTranslation("ACOFSB04",supportPosXIn-deltaXB,supportPosY,supportPosZ));
 335         acordeFullSupportUpFace->AddNode(acordeMainSupport,5,new TGeoTranslation("ACOFSB05",supportPosXOut+deltaXA,supportPosY,supportPosZ));
 336         acordeFullSupportUpFace->AddNode(acordeMainSupport,6,new TGeoTranslation("ACOFSB06",supportPosXOut+deltaXB,supportPosY,supportPosZ));
 337         acordeFullSupportUpFace->AddNode(acordeMainSupport,7,new TGeoTranslation("ACOFSB07",supportPosXOut-deltaXA,supportPosY,supportPosZ));
 338         acordeFullSupportUpFace->AddNode(acordeMainSupport,8,new TGeoTranslation("ACOFSB08",supportPosXOut-deltaXB,supportPosY,supportPosZ));
 339
 340         // Put the bars in the main volume acordeFullSupportUpFace
 341
 342         Float_t barPosXIn = constants->CenterModulePositionX(20);
 343         Float_t barPosY = supportPosY-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 344         Float_t barPosZ = 0;
 345         Int_t barIndex = 9;
 346         for(Int_t iBarModule = 20; iBarModule<30; iBarModule+=2)
 347         {
 348                 barPosZ = constants->CenterModulePositionZ(iBarModule);
 349                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex,new TGeoTranslation("ACOFSB09",barPosXIn+deltaXA,barPosY,barPosZ));
 350                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+1,new TGeoTranslation("ACOFSB09",barPosXIn+deltaXB,barPosY,barPosZ));
 351                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+2,new TGeoTranslation("ACOFSB09",barPosXIn-deltaXA,barPosY,barPosZ));
 352                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+3,new TGeoTranslation("ACOFSB09",barPosXIn-deltaXB,barPosY,barPosZ));
 353
 354                 barIndex+=4;
 355         }
 356
 357         Float_t barPosXOut = constants->CenterModulePositionX(30);
 358         for(Int_t iBarModule = 30; iBarModule<40; iBarModule+=2)
 359         {
 360                 barPosZ = constants->CenterModulePositionZ(iBarModule);
 361                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex,new TGeoTranslation("ACOFSB09",barPosXOut+deltaXA,barPosY,barPosZ));
 362                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+1,new TGeoTranslation("ACOFSB09",barPosXOut+deltaXB,barPosY,barPosZ));
 363                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+2,new TGeoTranslation("ACOFSB09",barPosXOut-deltaXA,barPosY,barPosZ));
 364                 acordeFullSupportUpFace->AddNode(acordeMainBar,barIndex+3,new TGeoTranslation("ACOFSB09",barPosXOut-deltaXB,barPosY,barPosZ));
 365
 366                 barIndex+=4;
 367         }
 368
 369         // Supports and bars for the InSide of L3 Magnet
 370
 371         TGeoVolume *acordeFullSupportInFace = new TGeoVolumeAssembly("ACORDE_FULL_SUPPORT_INFACE");
 372         Float_t supportPosXInA = constants->CenterModulePositionX(1)+deltaXA;
 373         Float_t supportPosYInA = 592.017-7.5-5.5;
 374         Float_t x0 = constants->CenterModulePositionX(1);
 375         Float_t y0 = constants->CenterModulePositionY(1);
 376         Float_t theta = -1*TMath::Pi()/4;
 377         Float_t supportPosXInPA = x0+(supportPosXInA-x0)*TMath::Cos(theta)-(supportPosYInA-y0)*TMath::Sin(theta);
 378         Float_t supportPosYInPA = y0+(supportPosYInA-y0)*TMath::Cos(theta)+(supportPosXInA-x0)*TMath::Sin(theta);
 379         Float_t supportPosZInIn = 0;
 380
 381         Float_t supportPosXInB = constants->CenterModulePositionX(1)+deltaXB;
 382         Float_t supportPosXInPB = x0+(supportPosXInB-x0)*TMath::Cos(theta)-(supportPosYInA-y0)*TMath::Sin(theta);
 383         Float_t supportPosYInPB = y0+(supportPosYInA-y0)*TMath::Cos(theta)+(supportPosXInB-x0)*TMath::Sin(theta);
 384
 385         Float_t supportPosXInC = constants->CenterModulePositionX(1)-deltaXA;
 386         Float_t supportPosXInPC = x0+(supportPosXInC-x0)*TMath::Cos(theta)-(supportPosYInA-y0)*TMath::Sin(theta);
 387         Float_t supportPosYInPC = y0+(supportPosYInA-y0)*TMath::Cos(theta)+(supportPosXInC-x0)*TMath::Sin(theta);
 388
 389         Float_t supportPosXInD = constants->CenterModulePositionX(1)-deltaXB;
 390         Float_t supportPosXInPD = x0+(supportPosXInD-x0)*TMath::Cos(theta)-(supportPosYInA-y0)*TMath::Sin(theta);
 391         Float_t supportPosYInPD = y0+(supportPosYInA-y0)*TMath::Cos(theta)+(supportPosXInD-x0)*TMath::Sin(theta);
 392
 393
 394         acordeFullSupportInFace->AddNode(acordeMainSupport,1,new TGeoCombiTrans("ACOFSBIN01",supportPosXInPA,supportPosYInPA,supportPosZInIn,idrotm232));
 395         acordeFullSupportInFace->AddNode(acordeMainSupport,2,new TGeoCombiTrans("ACOFSBIN02",supportPosXInPB,supportPosYInPB,supportPosZInIn,idrotm232));
 396         acordeFullSupportInFace->AddNode(acordeMainSupport,3,new TGeoCombiTrans("ACOFSBIN03",supportPosXInPC,supportPosYInPC,supportPosZInIn,idrotm232));
 397         acordeFullSupportInFace->AddNode(acordeMainSupport,4,new TGeoCombiTrans("ACOFSBIN04",supportPosXInPD,supportPosYInPD,supportPosZInIn,idrotm232));
 398
 399         Float_t supportPosXInE = constants->CenterModulePositionX(10)+deltaXA;
 400         Float_t supportPosYInE = 806.312-7.5-5.5;
 401         Float_t x00 = constants->CenterModulePositionX(10);
 402         Float_t y00 = constants->CenterModulePositionY(10);
 403         Float_t supportPosXInPE = x00+(supportPosXInE-x00)*TMath::Cos(theta)-(supportPosYInE-y00)*TMath::Sin(theta);
 404         Float_t supportPosYInPE = y00+(supportPosYInE-y00)*TMath::Cos(theta)+(supportPosXInE-x00)*TMath::Sin(theta);
 405
 406         Float_t supportPosXInF = constants->CenterModulePositionX(10)+deltaXB;
 407         Float_t supportPosXInPF = x00+(supportPosXInF-x00)*TMath::Cos(theta)-(supportPosYInE-y00)*TMath::Sin(theta);
 408         Float_t supportPosYInPF = y00+(supportPosYInE-y00)*TMath::Cos(theta)+(supportPosXInF-x00)*TMath::Sin(theta);
 409
 410         Float_t supportPosXInG = constants->CenterModulePositionX(10)-deltaXA+100;
 411         Float_t supportPosXInPG = x00+(supportPosXInG-x00)*TMath::Cos(theta)-(supportPosYInE-y00)*TMath::Sin(theta);
 412         Float_t supportPosYInPG = y00+(supportPosYInE-y00)*TMath::Cos(theta)+(supportPosXInG-x00)*TMath::Sin(theta);
 413
 414         acordeFullSupportInFace->AddNode(acordeMainSupport,5,new TGeoCombiTrans("ACOFSBIN05",supportPosXInPE,supportPosYInPE,supportPosZInIn,idrotm232));
 415         acordeFullSupportInFace->AddNode(acordeMainSupport,6,new TGeoCombiTrans("ACOFSBIN06",supportPosXInPF,supportPosYInPF,supportPosZInIn,idrotm232));
 416         acordeFullSupportInFace->AddNode(acordeMainSupport,7,new TGeoCombiTrans("ACOFSBIN07",supportPosXInPG,supportPosYInPG,supportPosZInIn,idrotm232));
 417
 418         // Put the bars in the main volume acordeFullSupportInFace
 419
 420         Int_t barIndexIn = 8;
 421
 422         for (Int_t iBarModule=1; iBarModule<9; iBarModule+=2)
 423         {
 424                 Float_t barPosXInIn = constants->CenterModulePositionX(iBarModule)+deltaXA;
 425                 Float_t barPosYInIn = supportPosYInA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 426                 Float_t barPosZInIn = constants->CenterModulePositionZ(iBarModule);
 427                 Float_t barPosXInP = x0+(barPosXInIn-x0)*TMath::Cos(theta)-(barPosYInIn-y0)*TMath::Sin(theta);
 428                 Float_t barPosYInP = y0+(barPosYInIn-y0)*TMath::Cos(theta)+(barPosXInIn-x0)*TMath::Sin(theta);
 429
 430                 Float_t barPosXInInA = constants->CenterModulePositionX(iBarModule)+deltaXB;
 431                 Float_t barPosYInInA = supportPosYInA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 432                 Float_t barPosZInInA = constants->CenterModulePositionZ(iBarModule);
 433                 Float_t barPosXInPA = x0+(barPosXInInA-x0)*TMath::Cos(theta)-(barPosYInInA-y0)*TMath::Sin(theta);
 434                 Float_t barPosYInPA = y0+(barPosYInInA-y0)*TMath::Cos(theta)+(barPosXInInA-x0)*TMath::Sin(theta);
 435
 436                 Float_t barPosXInInB = constants->CenterModulePositionX(iBarModule)-deltaXA;
 437                 Float_t barPosYInInB = supportPosYInA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 438                 Float_t barPosZInInB = constants->CenterModulePositionZ(iBarModule);
 439                 Float_t barPosXInPB = x0+(barPosXInInB-x0)*TMath::Cos(theta)-(barPosYInInB-y0)*TMath::Sin(theta);
 440                 Float_t barPosYInPB = y0+(barPosYInInB-y0)*TMath::Cos(theta)+(barPosXInInB-x0)*TMath::Sin(theta);
 441
 442                 Float_t barPosXInInC = constants->CenterModulePositionX(iBarModule)-deltaXB;
 443                 Float_t barPosYInInC = supportPosYInA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 444                 Float_t barPosZInInC = constants->CenterModulePositionZ(iBarModule);
 445                 Float_t barPosXInPC = x0+(barPosXInInC-x0)*TMath::Cos(theta)-(barPosYInInC-y0)*TMath::Sin(theta);
 446                 Float_t barPosYInPC = y0+(barPosYInInC-y0)*TMath::Cos(theta)+(barPosXInInC-x0)*TMath::Sin(theta);
 447
 448                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn,new TGeoCombiTrans("ACOFSBIN08",barPosXInP,barPosYInP,barPosZInIn,idrotm232));
 449                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+1,new TGeoCombiTrans("ACOFSBIN09",barPosXInPA,barPosYInPA,barPosZInInA,idrotm232));
 450                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+2,new TGeoCombiTrans("ACOFSBIN10",barPosXInPB,barPosYInPB,barPosZInInB,idrotm232));
 451                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+3,new TGeoCombiTrans("ACOFSBIN11",barPosXInPC,barPosYInPC,barPosZInInC,idrotm232));
 452
 453                 barIndexIn+=4;
 454         }
 455
 456         for (Int_t iBarModule=10; iBarModule<20; iBarModule+=2)
 457         {
 458                 Float_t barPosXInIn = constants->CenterModulePositionX(iBarModule)+deltaXA;
 459                 Float_t barPosYInIn = supportPosYInE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 460                 Float_t barPosZInIn = constants->CenterModulePositionZ(iBarModule);
 461                 Float_t barPosXInP = x00+(barPosXInIn-x00)*TMath::Cos(theta)-(barPosYInIn-y00)*TMath::Sin(theta);
 462                 Float_t barPosYInP = y00+(barPosYInIn-y00)*TMath::Cos(theta)+(barPosXInIn-x00)*TMath::Sin(theta);
 463
 464                 Float_t barPosXInInA = constants->CenterModulePositionX(iBarModule)+deltaXB;
 465                 Float_t barPosYInInA = supportPosYInE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 466                 Float_t barPosZInInA = constants->CenterModulePositionZ(iBarModule);
 467                 Float_t barPosXInPA = x00+(barPosXInInA-x00)*TMath::Cos(theta)-(barPosYInInA-y00)*TMath::Sin(theta);
 468                 Float_t barPosYInPA = y00+(barPosYInInA-y00)*TMath::Cos(theta)+(barPosXInInA-x00)*TMath::Sin(theta);
 469
 470                 Float_t barPosXInInB = constants->CenterModulePositionX(iBarModule)-deltaXA+100;
 471                 Float_t barPosYInInB = supportPosYInE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 472                 Float_t barPosZInInB = constants->CenterModulePositionZ(iBarModule);
 473                 Float_t barPosXInPB = x00+(barPosXInInB-x00)*TMath::Cos(theta)-(barPosYInInB-y00)*TMath::Sin(theta);
 474                 Float_t barPosYInPB = y00+(barPosYInInB-y00)*TMath::Cos(theta)+(barPosXInInB-x00)*TMath::Sin(theta);
 475
 476                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn,new TGeoCombiTrans("ACOFSBIN08",barPosXInP,barPosYInP,barPosZInIn,idrotm232));
 477                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+1,new TGeoCombiTrans("ACOFSBIN09",barPosXInPA,barPosYInPA,barPosZInInA,idrotm232));
 478                 acordeFullSupportInFace->AddNode(acordeMainBar,barIndexIn+2,new TGeoCombiTrans("ACOFSBIN10",barPosXInPB,barPosYInPB,barPosZInInB,idrotm232));
 479
 480                 barIndexIn+=4;
 481         }
 482
 483
 484         // Construction of the support and bars for the OutSide
 485
 486
 487         TGeoVolume *acordeFullSupportOutFace = new TGeoVolumeAssembly("ACORDE_FULL_SUPPORT_OUTFACE");
 488         Float_t supportPosXOutA = constants->CenterModulePositionX(45)+deltaXA-90;
 489         Float_t supportPosYOutA = 807.2915-7.5-5.5;
 490         Float_t x000 = constants->CenterModulePositionX(45);
 491         Float_t y000 = constants->CenterModulePositionY(45);
 492         Float_t theta1 = 1*TMath::Pi()/4;
 493
 494         Float_t supportPosXOutPA = x000+(supportPosXOutA-x000)*TMath::Cos(theta1)-(supportPosYOutA-y000)*TMath::Sin(theta1);
 495         Float_t supportPosYOutPA = y000+(supportPosYOutA-y000)*TMath::Cos(theta1)+(supportPosXOutA-x000)*TMath::Sin(theta1);
 496         Float_t supportPosZOutIn = 0;
 497
 498
 499         Float_t supportPosXOutC = constants->CenterModulePositionX(45)-deltaXA;
 500         Float_t supportPosXOutPC = x000+(supportPosXOutC-x000)*TMath::Cos(theta1)-(supportPosYOutA-1-y000)*TMath::Sin(theta1);
 501         Float_t supportPosYOutPC = y000+(supportPosYOutA-1-y000)*TMath::Cos(theta1)+(supportPosXOutC-x000)*TMath::Sin(theta1);
 502
 503         Float_t supportPosXOutD = constants->CenterModulePositionX(45)-deltaXB;
 504         Float_t supportPosXOutPD = x000+(supportPosXOutD-x000)*TMath::Cos(theta1)-(supportPosYOutA-1-y000)*TMath::Sin(theta1);
 505         Float_t supportPosYOutPD = y000+(supportPosYOutA-1-y000)*TMath::Cos(theta1)+(supportPosXOutD-x000)*TMath::Sin(theta1);
 506
 507
 508         acordeFullSupportOutFace->AddNode(acordeMainSupport,1,new TGeoCombiTrans("ACOFSBOUT01",supportPosXOutPA,supportPosYOutPA,supportPosZOutIn,idrotm231));
 509         acordeFullSupportOutFace->AddNode(acordeMainSupport,2,new TGeoCombiTrans("ACOFSBOUT02",supportPosXOutPC,supportPosYOutPC,supportPosZOutIn,idrotm231));
 510         acordeFullSupportOutFace->AddNode(acordeMainSupport,3,new TGeoCombiTrans("ACOFSBOUT03",supportPosXOutPD,supportPosYOutPD,supportPosZOutIn,idrotm231));
 511
 512
 513         Float_t supportPosXOutE = constants->CenterModulePositionX(52)+deltaXA;
 514         Float_t supportPosYOutE = 585.616-7.5-5.5-0.1;
 515         Float_t x0000 = constants->CenterModulePositionX(52);
 516         Float_t y0000 = constants->CenterModulePositionY(52);
 517
 518         Float_t supportPosXOutEP = x0000+(supportPosXOutE-x0000)*TMath::Cos(theta1)-(supportPosYOutE-y0000)*TMath::Sin(theta1);
 519         Float_t supportPosYOutEP = y0000+(supportPosYOutE-y0000)*TMath::Cos(theta1)+(supportPosXOutE-x0000)*TMath::Sin(theta1);
 520
 521         Float_t supportPosXOutF = constants->CenterModulePositionX(52)+deltaXB;
 522
 523         Float_t supportPosXOutFP = x0000+(supportPosXOutF-x0000)*TMath::Cos(theta1)-(supportPosYOutE-y0000)*TMath::Sin(theta1);
 524         Float_t supportPosYOutFP = y0000+(supportPosYOutE-y0000)*TMath::Cos(theta1)+(supportPosXOutF-x0000)*TMath::Sin(theta1);
 525
 526         Float_t supportPosXOutG = constants->CenterModulePositionX(52)-deltaXA;
 527         Float_t supportPosXOutGP = x0000+(supportPosXOutG-x0000)*TMath::Cos(theta1)-(supportPosYOutE-y0000)*TMath::Sin(theta1);
 528         Float_t supportPosYOutGP = y0000+(supportPosYOutE-y0000)*TMath::Cos(theta1)+(supportPosXOutG-x0000)*TMath::Sin(theta1);
 529
 530         Float_t supportPosXOutH = constants->CenterModulePositionX(52)-deltaXB;
 531         Float_t supportPosXOutHP = x0000+(supportPosXOutH-x0000)*TMath::Cos(theta1)-(supportPosYOutE-0.4-y0000)*TMath::Sin(theta1);
 532         Float_t supportPosYOutHP = y0000+(supportPosYOutE-0.4-y0000)*TMath::Cos(theta1)+(supportPosXOutH-x0000)*TMath::Sin(theta1);
 533
 534
 535         acordeFullSupportOutFace->AddNode(acordeMainSupport,4,new TGeoCombiTrans("ACOFSBOUT04",supportPosXOutEP,supportPosYOutEP,supportPosZOutIn,idrotm231));
 536         acordeFullSupportOutFace->AddNode(acordeMainSupport,5,new TGeoCombiTrans("ACOFSBOUT05",supportPosXOutFP,supportPosYOutFP,supportPosZOutIn,idrotm231));
 537         acordeFullSupportOutFace->AddNode(acordeMainSupport,6,new TGeoCombiTrans("ACOFSBOUT06",supportPosXOutGP,supportPosYOutGP,supportPosZOutIn,idrotm231));
 538         acordeFullSupportOutFace->AddNode(acordeMainSupport,7,new TGeoCombiTrans("ACOFSBOUT07",supportPosXOutHP,supportPosYOutHP,supportPosZOutIn,idrotm231));
 539
 540         // Put the bars of the PutFace Side 2 L3-Magnet
 541
 542
 543         Int_t indexBar0=8;
 544         for(Int_t iAcoBar = 40;iAcoBar < 50 ; iAcoBar+=2)
 545         {
 546                 Float_t barPosXOutIn = constants->CenterModulePositionX(iAcoBar)+deltaXA-90;
 547                 Float_t barPosYOutIn = supportPosYOutA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 548                 Float_t barPosZOutIn = constants->CenterModulePositionZ(iAcoBar);
 549                 Float_t barPosXOutP = x000+(barPosXOutIn-x000)*TMath::Cos(theta1)-(barPosYOutIn-y000)*TMath::Sin(theta1);
 550                 Float_t barPosYOutP = y000+(barPosYOutIn-y000)*TMath::Cos(theta1)+(barPosXOutIn-x000)*TMath::Sin(theta1);
 551
 552                 Float_t barPosXOutInA = constants->CenterModulePositionX(iAcoBar)-deltaXA;
 553                 Float_t barPosYOutInA = supportPosYOutA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5-1.;
 554                 Float_t barPosZOutInA = constants->CenterModulePositionZ(iAcoBar);
 555                 Float_t barPosXOutPA = x000+(barPosXOutInA-x000)*TMath::Cos(theta1)-(barPosYOutInA-y000)*TMath::Sin(theta1);
 556                 Float_t barPosYOutPA = y000+(barPosYOutInA-y000)*TMath::Cos(theta1)+(barPosXOutInA-x000)*TMath::Sin(theta1);
 557
 558
 559                 Float_t barPosXOutInB = constants->CenterModulePositionX(iAcoBar)-deltaXB;
 560                 Float_t barPosYOutInB = supportPosYOutA-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5-1.;
 561                 Float_t barPosZOutInB = constants->CenterModulePositionZ(iAcoBar);
 562                 Float_t barPosXOutPB = x000+(barPosXOutInB-x000)*TMath::Cos(theta1)-(barPosYOutInB-y000)*TMath::Sin(theta1);
 563                 Float_t barPosYOutPB = y000+(barPosYOutInB-y000)*TMath::Cos(theta1)+(barPosXOutInB-x000)*TMath::Sin(theta1);
 564
 565                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutP,barPosYOutP,barPosZOutIn,idrotm231));
 566                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+1,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPA,barPosYOutPA,barPosZOutInA,idrotm231));
 567                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+2,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPB,barPosYOutPB,barPosZOutInB,idrotm231));
 568
 569                 indexBar0+=4;
 570         }
 571         for(Int_t iAcoBar = 51;iAcoBar < 54 ; iAcoBar+=2)
 572         {
 573
 574                 Float_t barPosXOutInC = constants->CenterModulePositionX(iAcoBar)+deltaXA;
 575                 Float_t barPosYOutInC = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 576                 Float_t barPosZOutInC = constants->CenterModulePositionZ(iAcoBar);
 577                 Float_t barPosXOutPC = x0000+(barPosXOutInC-x0000)*TMath::Cos(theta1)-(barPosYOutInC-y0000)*TMath::Sin(theta1);
 578                 Float_t barPosYOutPC = y0000+(barPosYOutInC-y0000)*TMath::Cos(theta1)+(barPosXOutInC-x0000)*TMath::Sin(theta1);
 579
 580
 581                 Float_t barPosXOutInD = constants->CenterModulePositionX(iAcoBar)+deltaXB;
 582                 Float_t barPosYOutInD = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 583                 Float_t barPosZOutInD = constants->CenterModulePositionZ(iAcoBar);
 584                 Float_t barPosXOutPD = x0000+(barPosXOutInD-x0000)*TMath::Cos(theta1)-(barPosYOutInD-y0000)*TMath::Sin(theta1);
 585                 Float_t barPosYOutPD = y0000+(barPosYOutInD-y0000)*TMath::Cos(theta1)+(barPosXOutInD-x0000)*TMath::Sin(theta1);
 586
 587
 588                 Float_t barPosXOutInE = constants->CenterModulePositionX(iAcoBar)-deltaXA;
 589                 Float_t barPosYOutInE = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 590                 Float_t barPosZOutInE = constants->CenterModulePositionZ(iAcoBar);
 591                 Float_t barPosXOutPE = x0000+(barPosXOutInE-x0000)*TMath::Cos(theta1)-(barPosYOutInE-y0000)*TMath::Sin(theta1);
 592                 Float_t barPosYOutPE = y0000+(barPosYOutInE-y0000)*TMath::Cos(theta1)+(barPosXOutInE-x0000)*TMath::Sin(theta1);
 593                 Float_t barPosXOutInF = constants->CenterModulePositionX(iAcoBar)-deltaXB;
 594                 Float_t barPosYOutInF = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 595                 Float_t barPosZOutInF = constants->CenterModulePositionZ(iAcoBar);
 596                 Float_t barPosXOutPF = x0000+(barPosXOutInF-x0000)*TMath::Cos(theta1)-(barPosYOutInF-0.4-y0000)*TMath::Sin(theta1);
 597                 Float_t barPosYOutPF = y0000+(barPosYOutInF-0.4-y0000)*TMath::Cos(theta1)+(barPosXOutInF-x0000)*TMath::Sin(theta1);
 598
 599                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPC,barPosYOutPC,barPosZOutInC,idrotm231));
 600                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+1,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPD,barPosYOutPD,barPosZOutInD,idrotm231));
 601                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+2,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPE,barPosYOutPE,barPosZOutInE,idrotm231));
 602                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+3,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPF,barPosYOutPF,barPosZOutInF,idrotm231));
 603                 indexBar0+=4;
 604         }
 605
 606
 607         for(Int_t iAcoBar = 57;iAcoBar < 58 ; iAcoBar+=2)
 608         {
 609
 610                 Float_t barPosXOutInC = constants->CenterModulePositionX(iAcoBar)+deltaXA;
 611                 Float_t barPosYOutInC = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 612                 Float_t barPosZOutInC = constants->CenterModulePositionZ(iAcoBar);
 613                 Float_t barPosXOutPC = x0000+(barPosXOutInC-x0000)*TMath::Cos(theta1)-(barPosYOutInC-y0000)*TMath::Sin(theta1);
 614                 Float_t barPosYOutPC = y0000+(barPosYOutInC-y0000)*TMath::Cos(theta1)+(barPosXOutInC-x0000)*TMath::Sin(theta1);
 615
 616
 617                 Float_t barPosXOutInD = constants->CenterModulePositionX(iAcoBar)+deltaXB;
 618                 Float_t barPosYOutInD = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 619                 Float_t barPosZOutInD = constants->CenterModulePositionZ(iAcoBar);
 620                 Float_t barPosXOutPD = x0000+(barPosXOutInD-x0000)*TMath::Cos(theta1)-(barPosYOutInD-y0000)*TMath::Sin(theta1);
 621                 Float_t barPosYOutPD = y0000+(barPosYOutInD-y0000)*TMath::Cos(theta1)+(barPosXOutInD-x0000)*TMath::Sin(theta1);
 622
 623
 624                 Float_t barPosXOutInE = constants->CenterModulePositionX(iAcoBar)-deltaXA;
 625                 Float_t barPosYOutInE = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 626                 Float_t barPosZOutInE = constants->CenterModulePositionZ(iAcoBar);
 627                 Float_t barPosXOutPE = x0000+(barPosXOutInE-x0000)*TMath::Cos(theta1)-(barPosYOutInE-y0000)*TMath::Sin(theta1);
 628                 Float_t barPosYOutPE = y0000+(barPosYOutInE-y0000)*TMath::Cos(theta1)+(barPosXOutInE-x0000)*TMath::Sin(theta1);
 629                 Float_t barPosXOutInF = constants->CenterModulePositionX(iAcoBar)-deltaXB;
 630                 Float_t barPosYOutInF = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 631                 Float_t barPosZOutInF = constants->CenterModulePositionZ(iAcoBar);
 632                 Float_t barPosXOutPF = x0000+(barPosXOutInF-x0000)*TMath::Cos(theta1)-(barPosYOutInF-0.4-y0000)*TMath::Sin(theta1);
 633                 Float_t barPosYOutPF = y0000+(barPosYOutInF-0.4-y0000)*TMath::Cos(theta1)+(barPosXOutInF-x0000)*TMath::Sin(theta1);
 634
 635                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPC,barPosYOutPC,barPosZOutInC,idrotm231));
 636                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+1,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPD,barPosYOutPD,barPosZOutInD,idrotm231));
 637                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+2,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPE,barPosYOutPE,barPosZOutInE,idrotm231));
 638                 acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+3,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPF,barPosYOutPF,barPosZOutInF,idrotm231));
 639                 indexBar0+=4;
 640         }
 641
 642
 643         Float_t barPosXOutInC = constants->CenterModulePositionX(52)+deltaXA;
 644         Float_t barPosYOutInC = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 645         Float_t barPosZOutInC = constants->CenterModulePositionZ(55);
 646         Float_t barPosXOutPC = x0000+(barPosXOutInC-x0000)*TMath::Cos(theta1)-(barPosYOutInC-y0000)*TMath::Sin(theta1);
 647         Float_t barPosYOutPC = y0000+(barPosYOutInC-y0000)*TMath::Cos(theta1)+(barPosXOutInC-x0000)*TMath::Sin(theta1);
 648
 649
 650         Float_t barPosXOutInD = constants->CenterModulePositionX(52)+deltaXB;
 651         Float_t barPosYOutInD = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 652         Float_t barPosXOutPD = x0000+(barPosXOutInD-x0000)*TMath::Cos(theta1)-(barPosYOutInD-y0000)*TMath::Sin(theta1);
 653         Float_t barPosYOutPD = y0000+(barPosYOutInD-y0000)*TMath::Cos(theta1)+(barPosXOutInD-x0000)*TMath::Sin(theta1);
 654
 655
 656         Float_t barPosXOutInE = constants->CenterModulePositionX(52)-deltaXA;
 657         Float_t barPosYOutInE = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 658         Float_t barPosXOutPE = x0000+(barPosXOutInE-x0000)*TMath::Cos(theta1)-(barPosYOutInE-y0000)*TMath::Sin(theta1);
 659         Float_t barPosYOutPE = y0000+(barPosYOutInE-y0000)*TMath::Cos(theta1)+(barPosXOutInE-x0000)*TMath::Sin(theta1);
 660         Float_t barPosXOutInF = constants->CenterModulePositionX(52)-deltaXB;
 661         Float_t barPosYOutInF = supportPosYOutE-boxSingleBar[1]-boxUnionUp[1]-boxUnionDown[1]-7.5;
 662         Float_t barPosXOutPF = x0000+(barPosXOutInF-x0000)*TMath::Cos(theta1)-(barPosYOutInF-0.4-y0000)*TMath::Sin(theta1);
 663         Float_t barPosYOutPF = y0000+(barPosYOutInF-0.4-y0000)*TMath::Cos(theta1)+(barPosXOutInF-x0000)*TMath::Sin(theta1);
 664
 665         acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPC,barPosYOutPC,barPosZOutInC,idrotm231));
 666         acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+1,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPD,barPosYOutPD,barPosZOutInC,idrotm231));
 667         acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+2,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPE,barPosYOutPE,barPosZOutInC,idrotm231));
 668         acordeFullSupportOutFace->AddNode(acordeMainBar,indexBar0+3,new TGeoCombiTrans("ACOFSBOUT08",barPosXOutPF,barPosYOutPF,barPosZOutInC,idrotm231));
 669
 670
 671
 672
 673
 674         supportBars->AddNode(acordeFullSupportUpFace,1);
 675         supportBars->AddNode(acordeFullSupportInFace,2);
 676         supportBars->AddNode(acordeFullSupportOutFace,3);
 677         acorde->AddNode(acordeModules,1);
 678         acorde->AddNode(supportBars,2);
 679         alice->AddNode(acorde,1);//---> put volume of ACORDE over ALICE's volume
 680
 681
 682
 683 }
 684 //__________________________________________________________________________
 685
 686 void AliACORDEv1::Init()
 687 {
 688   // Initialise L3 magnet after it has been built
 689   Int_t i;
 690   if(AliLog::GetGlobalDebugLevel()>0) {
 691     printf("\n%s: ",ClassName());
 692     for(i=0;i<35;i++) printf("*");
 693     printf(" ACORDEv1_INIT ");
 694     for(i=0;i<35;i++) printf("*");
 695     printf("\n%s: ",ClassName());
 696     // Here the ACORDEv initialisation code (if any!)
 697     for(i=0;i<80;i++) printf("*");
 698     printf("\n");
 699   }
 700  // AliACORDE::Init();
 701 }
 702 //____________________________________________________________________________
 703 void AliACORDEv1::StepManager()
 704 {
 705
 706   //
 707   // Called for every step in the Cosmic Ray Trigger
 708   //
 709
 710
 711   // volume:
 712   //  [0] = module number 1-60 (1==>(0-0), 60 (5-9)
 713   //  [1] = Plastic number: 0 (down) to 1 (up)
 714   static Int_t   vol[2];
 715   //
 716   // hit
 717   // [0] = PID
 718   // [1-3] = x, y, z
 719   // [4] = time
 720   // [5-7] = px, py, pz
 721   // [8] = energy
 722   // [9] = energy loss
 723   // [10] = length of track through plastic
 724   static Float_t hits[11];
 725
 726   // local static variables
 727   static Float_t eloss;
 728   static Float_t step;
 729   // scintillator volume
 730  static Int_t idScint = TVirtualMC::GetMC()->VolId("ACORDESCINTILLATORMODULE");
 731   // local variables
 732   Int_t copy;
 733   TLorentzVector pos;
 734   TLorentzVector mom;
 735
 736   // only charged tracks
 737   if ( !TVirtualMC::GetMC()->TrackCharge() || !TVirtualMC::GetMC()->IsTrackAlive() ) return;
 738
 739   // only in sensitive material
 740   if (TVirtualMC::GetMC()->CurrentVolID(copy) == idScint) {
 741
 742     step  += TVirtualMC::GetMC()->TrackStep();
 743     eloss += TVirtualMC::GetMC()->Edep();
 744     // set all hit variables except eloss which is resetted
 745     // set volume variables
 746     if (TVirtualMC::GetMC()->IsTrackEntering()) {
 747       eloss = 0.0;
 748       step = 0.0;
 749       TVirtualMC::GetMC()->TrackPosition(pos);
 750       TVirtualMC::GetMC()->TrackMomentum(mom);
 751       // hit
 752       // [0] = PID
 753       // [1-3] = x, y, z
 754       // [4] = time
 755       // [5-7] = px, py, pz
 756       // [8] = energy
 757       // [9] = energy loss
 758       hits[0]  = (Float_t ) TVirtualMC::GetMC()->TrackPid();
 759
 760
 761       hits[1] = pos[0];
 762       hits[2] = pos[1];
 763       hits[3] = pos[2];
 764       hits[4] = TVirtualMC::GetMC()->TrackTime();
 765       hits[5] = mom[0];
 766       hits[6] = mom[1];
 767       hits[7] = mom[2];
 768       hits[8] = TVirtualMC::GetMC()->Etot();
 769       // volume:
 770       //  [0] = module number 1-60 (1==>(0-0), 60 (5-9)
 771       //  [1] = Plastic number: 0 (down) to 1 (up)
 772       Int_t copyPlastic; // plastic: down=1, up=2
 773       Int_t copyModule; // module: 1-60
 774       TVirtualMC::GetMC()->CurrentVolID(copyPlastic);
 775       TVirtualMC::GetMC()->CurrentVolOffID(1, copyModule);
 776       // module
 777       vol[0] = copyModule;
 778       // plastic: 0 = down, 1 = up
 779       vol[1] = copyPlastic - 4 ; // !!!!!!!
 780     // vol[1] = copyPlastic;
 781     } // end if TVirtualMC::GetMC()->IsTrackEntering()
 782
 783     // set hit[9] = total energy loss and book hit
 784     if( TVirtualMC::GetMC()->IsTrackExiting() ||
 785         TVirtualMC::GetMC()->IsTrackStop() ||
 786         TVirtualMC::GetMC()->IsTrackDisappeared()){
 787       hits[9] = eloss;
 788       hits[10] = step;
 789       eloss = 0.0;
 790       step = 0.0;
 791       AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits);
 792      }
 793   }
 794
 795
 796
 797 }
 798
 799 //_____________________________________________________________________________
 800 void AliACORDEv1::AddHit(Int_t track, Int_t *vol, Float_t *hits)
 801 {
 802   //
 803   // Add an ACORDE hit
 804   //
 805   TClonesArray &lhits = *fHits;
 806   new(lhits[fNhits++]) AliACORDEhit(fIshunt,track,vol,hits);
 807 }
 808
 809 //_____________________________________________________________________________
 810 void AliACORDEv1::AddDigits(Int_t* track, Int_t module, Float_t time)
 811 {
 812
 813   // Adds Digit
 814
 815   TClonesArray &ldigits = *fDigits;
 816   new(ldigits[fNdigits++]) AliACORDEdigit(track,module,time);
 817 }
 818 //_____________________________________________________________________________
 819
 820 void AliACORDEv1::MakeBranch(Option_t *option)
 821 {
 822 // Creates new branches in the current Root Tree
 823
 824   char branchname[10];
 825   snprintf(branchname,9,"%s",GetName());
 826   AliDebug(2,Form("fBufferSize = %d",fBufferSize));
 827   const char *cH = strstr(option,"H");
 828   if (fHits   && fLoader->TreeH() && cH) {
 829     fLoader->TreeH()->Branch(branchname,&fHits, fBufferSize);
 830     AliDebug(2,Form("Making Branch %s for hits",branchname));
 831   }
 832   const char *cD = strstr(option,"D");
 833   if (fDigits   && fLoader->TreeD() && cD) {
 834     fLoader->TreeD()->Branch(branchname,&fDigits, fBufferSize);
 835     AliDebug(2,Form("Making Branch %s for digits",branchname));
 836   }
 837 }
 838
 839 //_____________________________________________________________________________
 840 void AliACORDEv1::AddAlignableVolumes() const
 841 {
 842   //
 843   // Create entries for alignable volumes associating the symbolic volume
 844   // name with the corresponding volume path. Needs to be syncronized with
 845   // eventual changes in the geometry.
 846   //
 847
 848         // The alignable volumes are only the "ACORDE_MODULE_%d"
 849         //
 850         //      Structure of ACORDE's Geometry
 851         //
 852         //      ALIC_1
 853         //          |---> ACORDE_1
 854         //                      |----> ALL_ACORDE_MODULES_1/ACORDE_MODULE_%d (d:0->to->59)
 855         //                      |----> ACORDE_SUPPORT_BARS_2    |--> BARS&SUPPORTS
 856         //
 857         //     Send comments to: Mario Rodriguez Cahuantzi <mrodrigu@mail.cern.ch>
 858
 859         TString vpstr1 = "ALIC_1/ACORDE_1/ALL_ACORDE_MODULES_1/ACORDE_MODULE_";
 860         TString snstr1 = "ACORDE/Array";
 861         TString volpath, symname;
 862         for(Int_t dy=0; dy<60 ; dy++)
 863         {
 864                 volpath = vpstr1;
 865                 volpath += dy;
 866                 symname = snstr1;
 867                 symname += dy;
 868                 if(!gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data()))
 869                 AliFatal(Form("Alignable entry %s not created. Volume path %s not valid", symname.Data(),volpath.Data()));
 870         }
 871 }