1 #ifndef ALICALOCALIBPEDESTAL_H
2 #define ALICALOCALIBPEDESTAL_H
4 /* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
5 * See cxx source for full Copyright notice */
10 // \file AliCaloCalibPedestal.h
11 // \brief Description:
12 // A help class for monitoring and calibration tools: MOOD, AMORE etc.,
13 // that can process events from a standard AliCaloRawStream,
14 // most usually from LED/pulser runs. It stores signal info as
15 // typical (highest) amplitude, and pedestal info in geometrically-binned
16 // 2D profiles of the detectors (EMCAL and PHOS).
17 // Comparisons (ratios and differences) can be done with references.
19 // \author: Timo Alho (Jyvaskyla), original version.
20 // [Consultant: D. Silvermyr (ORNL)]
21 // Partly based on AliTPCCalibPedestal.
23 // \version $Revision$
26 #include "TProfile2D.h"
28 #include "TObjArray.h"
29 class AliCaloRawStream;
30 class AliCaloAltroMapping;
33 class AliCaloCalibPedestal : public TObject {
37 enum kDetType {kPhos, kEmCal, kNone};//The detector types
38 enum kDeadMapEntry{kAlive = 0, kDead, kResurrected, kRecentlyDeceased, kNumDeadMapStates};//The entries being put to the deadmap
40 AliCaloCalibPedestal(kDetType detectorType = kPhos);
41 virtual ~AliCaloCalibPedestal();
43 // copy ctor, and '=' operator, are not fully tested/debugged yet
44 // at least for now; the reference info is not copied from one to the other
45 AliCaloCalibPedestal(const AliCaloCalibPedestal &ped);
46 AliCaloCalibPedestal& operator = (const AliCaloCalibPedestal &source);
48 //Functions to ask for the constants (in case a GUI needs them, for an example
49 int GetSampleMax() const {return fgkSampleMax;};
50 int GetSampleMin() const {return fgkSampleMin;};
52 // Event processing methods:
53 Bool_t ProcessEvent(AliRawReader *rawReader);
54 Bool_t ProcessEvent(AliCaloRawStream *in);
57 AliCaloAltroMapping **GetAltroMapping() { return fMapping; };
58 void SetAltroMapping(AliCaloAltroMapping **mapp) { fMapping = mapp; };
60 ////////////////////////////
63 TProfile2D * GetPedProfileLowGain(int i) const {return (TProfile2D*)fPedestalLowGain[i];}; // Return a pointer to the low-gain pedestal profile
64 TProfile2D * GetPedProfileHighGain(int i) const {return (TProfile2D*)fPedestalHighGain[i];}; // Return a pointer to the high-gain pedestal profile
65 TProfile2D * GetSampleProfileLowGain(int i) const {return (TProfile2D*)fSampleLowGain[i];}; // Return a pointer to the low-gain profile of all samples
66 TProfile2D * GetSampleProfileHighGain(int i) const {return (TProfile2D*)fSampleHighGain[i];}; // Return a pointer to the high-gain profile of all samples
67 TProfile2D * GetPeakProfileLowGain(int i) const {return (TProfile2D*)fPeakMinusPedLowGain[i];}; // Return a pointer to the low-gain pedestal profile
68 TProfile2D * GetPeakProfileHighGain(int i) const {return (TProfile2D*)fPeakMinusPedHighGain[i];}; // Return a pointer to the high-gain pedestal profile
70 // Differences to references:
71 TProfile2D * GetPedProfileLowGainDiff(int i){ValidateComparisonProfiles(); return (TProfile2D*)fPedestalLowGainDiff[i];}; // Return a pointer to the low-gain pedestal profile difference
72 TProfile2D * GetPedProfileHighGainDiff(int i){ValidateComparisonProfiles(); return (TProfile2D*)fPedestalHighGainDiff[i];}; // Return a pointer to the high-gain pedestal profile difference
73 TProfile2D * GetPeakProfileLowGainDiff(int i){ValidateComparisonProfiles(); return (TProfile2D*)fPeakMinusPedLowGainDiff[i];}; // Return a pointer to the low-gain pedestal profile difference
74 TProfile2D * GetPeakProfileHighGainDiff(int i){ValidateComparisonProfiles(); return (TProfile2D*)fPeakMinusPedHighGainDiff[i];}; // Return a pointer to the high-gain pedestal profile difference
76 // Ratio to references:
77 TProfile2D * GetPedProfileLowGainRatio(int i){ValidateComparisonProfiles(); return (TProfile2D*)fPedestalLowGainRatio[i];}; // Return a pointer to the low-gain pedestal profile ratio
78 TProfile2D * GetPedProfileHighGainRatio(int i){ValidateComparisonProfiles(); return (TProfile2D*)fPedestalHighGainRatio[i];}; // Return a pointer to the high-gain pedestal profile ratio
79 TProfile2D * GetPeakProfileLowGainRatio(int i){ValidateComparisonProfiles(); return (TProfile2D*)fPeakMinusPedLowGainRatio[i];}; // Return a pointer to the low-gain pedestal profile ratio
80 TProfile2D * GetPeakProfileHighGainRatio(int i){ValidateComparisonProfiles(); return (TProfile2D*)fPeakMinusPedHighGainRatio[i];}; // Return a pointer to the high-gain pedestal profile ratio
82 TH2D * GetDeadMap(int i) const {return (TH2D*)fDeadMap[i];};
84 // Basic info: getters
85 kDetType GetDetectorType() const {return fDetType;};//Returns if this is a PHOS or EMCAL object
86 TString GetCaloString() const {return fCaloString;}; //Returns if this is a PHOS or EMCAL object
88 int GetColumns() const {return fColumns;}; //The number of columns per module
89 int GetRows() const {return fRows;}; //The number of rows per module
90 int GetModules() const {return fModules;}; //The number of modules
91 int GetRowMin() const {return fRowMin;}; //for histo def.
92 int GetRowMax() const {return fRowMax;}; //for histo def.
93 int GetRowMultiplier() const {return fRowMultiplier;}; //for histo filling
95 // RunNumbers : setters and getters
96 void SetRunNumber(int runNo) {fRunNumber = runNo;};
97 int GetRunNumber() const {return fRunNumber;};
98 int GetRefRunNumber() const {if (fReference) return fReference->GetRunNumber(); else return -1;};
101 int GetNEvents() const {return fNEvents;};
102 int GetNChanFills() const {return fNChanFills;};
104 /////////////////////////////
106 int GetDeadTowerCount() const {return fDeadTowers;};//Returns the number of dead towers, by counting the bins in peak-pedestal smaller than threshold
107 double GetDeadTowerRatio() const {return fDeadTowers/(double)(fRows*fColumns);}; //returns the percentage of dead towers, relative to a full module
108 int GetDeadTowerNew() const {return fNewDeadTowers;}; //return the new dead towers compared to the reference
109 int GetDeadTowerResurrected() const {return fResurrectedTowers;}; //The the towers resurrected since the reference run
111 void Reset();//Resets the whole class.
112 Bool_t AddInfo(const AliCaloCalibPedestal *ped);//picks up new info from supplied argument
114 //////////////////////////////////////////////////////
115 //Functions related to comparing this with another (reference) run.
116 Bool_t LoadReferenceCalib(TString fileName, TString objectName); //Loads another AliCaloCalibPedestal by name "objectName" from the file "fileName", for reference
117 void ComputeDiffAndRatio();//Actually computes the difference and ratio into the histo's in memory
118 AliCaloCalibPedestal * GetReference() const {return fReference;}; //Get the reference object. Needed for debug, will probably be removed later
119 void ComputeDeadTowers(int threshold = 5, const char * deadMapFile = 0);//Computes the dead tower values
123 Bool_t SaveHistograms(TString fileName, Bool_t saveEmptyHistos = kFALSE); //Saves the histograms to a .root file
127 void ValidateComparisonProfiles(); //Makes sure that fPe..Diff and fPe..Ratio profiles exist
129 //The histograms. We use a TObjArray instead of a simple array,because this gives automatic streaming properties for the
130 //class. A TClonesArray would be more efficient, but it's a bit more difficult to use and it doesn't matter too much
131 //since we have only around 12 objects (maximum) in the array anyway.
132 TObjArray fPedestalLowGain; // pedestal info for low gain
133 TObjArray fPedestalHighGain; // pedestal info for high gain
134 TObjArray fSampleLowGain; // all sample info for low gain
135 TObjArray fSampleHighGain; // all sample info for high gain
136 TObjArray fPeakMinusPedLowGain; // (peak-pedestal) info for low gain
137 TObjArray fPeakMinusPedHighGain; // (peak-pedestal) info for high gain
139 //The difference of profiles between this and the reference object
140 TObjArray fPedestalLowGainDiff; //!
141 TObjArray fPedestalHighGainDiff; //!
142 TObjArray fPeakMinusPedLowGainDiff; //!
143 TObjArray fPeakMinusPedHighGainDiff; //!
145 //The ratio of profiles between this and the reference object
146 TObjArray fPedestalLowGainRatio; //!
147 TObjArray fPedestalHighGainRatio; //!
148 TObjArray fPeakMinusPedLowGainRatio; //!
149 TObjArray fPeakMinusPedHighGainRatio; //!
151 TObjArray fDeadMap;//The deadmap
154 int fNEvents; //# total events processed,
155 int fNChanFills; //# total channel fills (NChan * NEvents if not zero-suppressed)
157 //The dead tower counts
159 int fNewDeadTowers; //! Towers that have died since the reference run
160 int fResurrectedTowers; //! Towers that have been resurrected from the dead, compared to the reference
162 AliCaloCalibPedestal * fReference; //! A reference object, for comparing the accumulated results to a previous run
164 kDetType fDetType; //The detector type for this object
165 int fColumns; //The number of columns per module
166 int fRows; //The number of rows per module
167 int fModules; //The number of modules
168 int fRowMin; // Mimimum Row number
169 int fRowMax; // Maximum now number
170 int fRowMultiplier; // Multiplication factor to get proper row range between PHOS and EMCAL
171 TString fCaloString; // id for which detector type we have
172 AliCaloAltroMapping **fMapping; //! Altro Mapping object
173 int fRunNumber; //The run number. Needs to be set by the user.
175 //Constants needed by the class
176 static const int fgkSampleMax = 1023; // highest possible sample value (10-bit = 0x3ff)
177 static const int fgkSampleMin = 0; // lowest possible sample value
179 static const int fgkPhosRows = 64; // number of rows per module for PHOS
180 static const int fgkPhosCols = 56; // number of columns per module for PHOS
181 static const int fgkPhosModules = 5; // number of modules for PHOS
183 static const int fgkEmCalRows = 24; // number of rows per module for EMCAL
184 static const int fgkEmCalCols = 48; // number of columns per module for EMCAL
185 static const int fgkEmCalModules = 12; // number of modules for EMCAL
187 ClassDef(AliCaloCalibPedestal,2)