Coding conventions
[u/mrichter/AliRoot.git] / ITS / AliITSv11Hybrid.cxx
1 /**************************************************************************
2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3  *                                                                        *
4  * Author: The ALICE Off-line Project.                                    *
5  * Contributors are mentioned in the code where appropriate.              *
6  *                                                                        *
7  * Permission to use, copy, modify and distribute this software and its   *
8  * documentation strictly for non-commercial purposes is hereby granted   *
9  * without fee, provided that the above copyright notice appears in all   *
10  * copies and that both the copyright notice and this permission notice   *
11  * appear in the supporting documentation. The authors make no claims     *
12  * about the suitability of this software for any purpose. It is          *
13  * provided "as is" without express or implied warranty.                  *
14  **************************************************************************/
15
16
17 // $Id$
18
19
20 //========================================================================
21 //
22 //            Geometry of the Inner Tracking System
23 //
24 //  This geometry is a mix between the old geometry (originally coded
25 //  in AliITSvPPRasymmFMD) and the new TGeo geometry (v11).
26 //  The flags which indicate whether the old or the new part is used
27 //  is set in AliITSInitGeometry.cxx
28 // 
29 // Ludovic Gaudichet  (gaudichet@to.infn.it)
30 //
31 //========================================================================
32
33
34
35 // $Log$
36 // Revision 1.8  2007/10/21 18:59:10  masera
37 // SPD new geometry added to Hybrid V11
38 //
39 // Revision 1.7  2007/08/24 14:32:57  hristov
40 // Introduction of SPD half-stave volumes, cleaning and new code (in relation to new SPD geometry) in AliITSv11Hybrid (Ludovic)
41 //
42 // Revision 1.6  2007/07/27 08:12:39  morsch
43 // Write all track references into the same branch.
44 //
45 // Revision 1.5  2007/06/28 10:17:25  masera
46 // Introduction of the new SSD geometry in simulation (AliITSv11Hybrid) and suppression of overlaps between old and new parts
47 //
48 // Revision 1.4  2007/05/09 20:40:41  masera
49 // Bug fix (V11Hybrid geometry)
50 //
51 // Revision 1.3  2007/05/08 16:57:42  masera
52 // Updates concerning the geometry: versioning system, new V11hybrid version, bug fixes (B.Nilsend and L. Gaudichet
53 //
54
55
56 #include <TClonesArray.h>
57 #include <TGeometry.h>
58 #include <TLorentzVector.h>
59 #include <TGeoMatrix.h>
60 #include <TGeoPhysicalNode.h>
61 #include <TString.h>
62 #include <TNode.h>
63 #include <TTUBE.h>
64 #include <TGeoManager.h>
65 #include <TGeoVolume.h>
66 #include <TVirtualMC.h>
67
68 #include "AliITS.h"
69 #include "AliITSDetTypeSim.h"
70 #include "AliITSgeom.h"
71 #include "AliITSgeomSDD.h"
72 #include "AliITSgeomSPD.h"
73 #include "AliITSgeomSSD.h"
74 #include "AliITShit.h"
75 #include "AliITSCalibrationSDD.h"
76 #include "AliITSsegmentationSDD.h"
77 #include "AliITSsegmentationSPD.h"
78 #include "AliITSsegmentationSSD.h"
79 #include "AliITSv11Hybrid.h"
80 #include "AliLog.h"
81 #include "AliMC.h"
82 #include "AliMagF.h"
83 #include "AliRun.h"
84 #include "AliTrackReference.h"
85 #include "AliITSInitGeometry.h"
86 #include "AliITSv11GeometrySPD.h"
87 #include "AliITSv11GeometrySDD.h"
88 #include "AliITSv11GeometrySSD.h"
89
90
91 ClassImp(AliITSv11Hybrid)
92
93 //______________________________________________________________________
94 AliITSv11Hybrid::AliITSv11Hybrid():
95   AliITS(),
96   fGeomDetOut(kFALSE),
97   fGeomDetIn(kFALSE),
98   fByThick(kTRUE),
99   fMajorVersion(IsVersion()),
100   fMinorVersion(-1),
101   fDet1(0),
102   fDet2(0),
103   fChip1(0),
104   fChip2(0),
105   fRails(0),
106   fFluid(0),
107   fIDMother(0),
108   fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
109   fSPDgeom(0),
110   fSDDgeom(0),
111   fSSDgeom(0)
112  {
113     //    Standard default constructor
114     // Inputs:
115     //   none.
116     // Outputs:
117     //   none.
118     // Return:
119     //   none.
120 }
121
122 //______________________________________________________________________
123 AliITSv11Hybrid::AliITSv11Hybrid(const char *title) 
124   : AliITS("ITS", title),
125     fGeomDetOut(kFALSE),
126     fGeomDetIn(kFALSE),
127     fByThick(kTRUE),
128     fMajorVersion(IsVersion()),
129     fMinorVersion(1),
130     fDet1(200.0),
131     fDet2(200.0),
132     fChip1(150.0),
133     fChip2(150.0),
134     fRails(0),
135     fFluid(1),
136     fIDMother(0),
137     fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
138     fSPDgeom(0),
139     fSDDgeom(0),
140     fSSDgeom(0) {
141     //    Standard constructor for the v11Hybrid geometry.
142     // Inputs:
143     //   const char * title  Arbitrary title
144     // Outputs:
145     //   none.
146     // Return:
147     //   none.
148   Int_t i;
149   
150   fSPDgeom = new AliITSv11GeometrySPD();
151   fSDDgeom = new AliITSv11GeometrySDD(0);
152   fSSDgeom = new AliITSv11GeometrySSD();
153
154   fIdN = 6;
155   fIdName = new TString[fIdN];
156
157   if (AliITSInitGeometry::SPDIsTGeoNative()) {
158     fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
159     fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
160   } else {
161     fIdName[0] = "ITS1";
162     fIdName[1] = "ITS2";
163   }
164
165   if (AliITSInitGeometry::SDDIsTGeoNative()) {
166     fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
167     fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
168   } else {
169     fIdName[2] = "ITS3";
170     fIdName[3] = "ITS4";
171   }
172   
173   if (AliITSInitGeometry::SSDIsTGeoNative()) {
174     fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
175     fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
176   } else {
177     fIdName[4] = "ITS5";
178     fIdName[5] = "ITS6";
179   }
180
181   fIdSens    = new Int_t[fIdN];
182   for(i=0;i<fIdN;i++) fIdSens[i] = 0;
183   SetThicknessDet1();
184   SetThicknessDet2();
185   SetThicknessChip1();
186   SetThicknessChip2();
187   SetDensityServicesByThickness();
188   
189   fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
190   strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
191   strncpy(fRead,fEuclidGeomDet,60);
192   strncpy(fWrite,fEuclidGeomDet,60);
193   strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
194 }
195
196 //______________________________________________________________________
197 AliITSv11Hybrid::AliITSv11Hybrid(const char *name, const char *title) 
198   : AliITS("ITS", title),
199     fGeomDetOut(kFALSE),
200     fGeomDetIn(kFALSE),
201     fByThick(kTRUE),
202     fMajorVersion(IsVersion()),
203     fMinorVersion(1),
204     fDet1(200.0),
205     fDet2(200.0),
206     fChip1(150.0),
207     fChip2(150.0),
208     fRails(0),
209     fFluid(1),
210     fIDMother(0),
211     fInitGeom((AliITSVersion_t)fMajorVersion,fMinorVersion),
212     fSPDgeom(0),
213     fSDDgeom(0),
214     fSSDgeom(0) {
215     //    Standard constructor for the v11Hybrid geometry.
216     // Inputs:
217     //   const char * name   Ignored, set to "ITS"
218     //   const char * title  Arbitrary title
219     // Outputs:
220     //   none.
221     // Return:
222     //   none.
223   Int_t i;
224   
225   fSPDgeom = new AliITSv11GeometrySPD();
226   fSDDgeom = new AliITSv11GeometrySDD(0);
227   fSSDgeom = new AliITSv11GeometrySSD();
228
229   fIdN = 6;
230   fIdName = new TString[fIdN];
231
232   (void) name; // removes warning message
233
234   if (AliITSInitGeometry::SPDIsTGeoNative()) {
235     fIdName[0] = fSPDgeom->GetSenstiveVolumeName1();
236     fIdName[1] = fSPDgeom->GetSenstiveVolumeName2();
237   } else {
238     fIdName[0] = "ITS1";
239     fIdName[1] = "ITS2";
240   }
241
242   if (AliITSInitGeometry::SDDIsTGeoNative()) {
243     fIdName[2] = fSDDgeom->GetSenstiveVolumeName3();
244     fIdName[3] = fSDDgeom->GetSenstiveVolumeName4();
245   } else {
246     fIdName[2] = "ITS3";
247     fIdName[3] = "ITS4";
248   }
249   
250   if (AliITSInitGeometry::SSDIsTGeoNative()) {
251     fIdName[4] = fSSDgeom->GetSenstiveVolumeName5();
252     fIdName[5] = fSSDgeom->GetSenstiveVolumeName6();
253   } else {
254     fIdName[4] = "ITS5";
255     fIdName[5] = "ITS6";
256   }
257
258   fIdSens    = new Int_t[fIdN];
259   for(i=0;i<fIdN;i++) fIdSens[i] = 0;
260   SetThicknessDet1();
261   SetThicknessDet2();
262   SetThicknessChip1();
263   SetThicknessChip2();
264   SetDensityServicesByThickness();
265   
266   fEuclidGeometry="$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.euc";
267   strncpy(fEuclidGeomDet,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymm2.det",60);
268   strncpy(fRead,fEuclidGeomDet,60);
269   strncpy(fWrite,fEuclidGeomDet,60);
270   strncpy(fRead,"$ALICE_ROOT/ITS/ITSgeometry_vPPRasymmFMD.det",60);
271 }
272
273 //______________________________________________________________________
274 AliITSv11Hybrid::~AliITSv11Hybrid() {
275     //    Standard destructor
276     // Inputs:
277     //   none.
278     // Outputs:
279     //   none.
280     // Return:
281     //   none.
282   delete fSPDgeom;
283   delete fSDDgeom;
284   delete fSSDgeom;
285 }
286
287 //______________________________________________________________________
288 void AliITSv11Hybrid::SetT2Lmatrix(const char *name, Double_t yShift, 
289                                    Bool_t yFlip, Bool_t yRot180)
290   const {
291
292   //
293   // Creates the TGeo Local to Tracking transformation matrix
294   // and sends it to the corresponding TGeoPNEntry 
295   //
296   // This function is used in AddAlignableVolumes()
297
298   TGeoPNEntry *alignableEntry = gGeoManager->GetAlignableEntry(name);
299   const char *path = alignableEntry->GetTitle();
300
301   if (!gGeoManager->cd(path))
302     AliFatal(Form("Volume path %s not valid!",path));
303   TGeoHMatrix* globMatrix = gGeoManager->GetCurrentMatrix();
304
305   Double_t *gtrans = globMatrix->GetTranslation(), rotMatrix[9];
306   memcpy(&rotMatrix[0], globMatrix->GetRotationMatrix(), 9*sizeof(Double_t));
307   Double_t al = TMath::ATan2(rotMatrix[1],rotMatrix[0]);
308   if (yRot180) {
309     al = TMath::ATan2(rotMatrix[1],-rotMatrix[0]);
310   }
311
312   TGeoHMatrix *matLtoT = new TGeoHMatrix;
313   matLtoT->SetDx( gtrans[0]*TMath::Cos(al)+gtrans[1]*TMath::Sin(al) ); // translation
314   matLtoT->SetDy( yShift );
315   matLtoT->SetDz(-gtrans[2]);
316   rotMatrix[0]= 0;  rotMatrix[1]= 1;  rotMatrix[2]= 0; // + rotation
317   rotMatrix[3]= 1;  rotMatrix[4]= 0;  rotMatrix[5]= 0;
318   rotMatrix[6]= 0;  rotMatrix[7]= 0;  rotMatrix[8]=-1;
319   if (yFlip) rotMatrix[3] = -1;  // flipping in y  (for SPD1)
320
321   if (yRot180) { // rotation of pi around the axis perpendicular to the wafer
322     matLtoT->SetDy( -yShift );
323     rotMatrix[3] = -1;
324     if (yFlip) rotMatrix[3] = 1;  // flipping in y  (for SPD1)
325     matLtoT->SetDz(gtrans[2]);
326     rotMatrix[8]=1;
327   }
328
329   TGeoRotation rot;
330   rot.SetMatrix(rotMatrix);
331   matLtoT->MultiplyLeft(&rot);
332   TGeoHMatrix *matTtoL = new TGeoHMatrix(matLtoT->Inverse());
333   delete matLtoT;
334   alignableEntry->SetMatrix(matTtoL);
335 }
336
337 //______________________________________________________________________
338 void AliITSv11Hybrid::AddAlignableVolumes() const
339 {
340   //
341   // Creates entries for alignable volumes associating the symbolic volume
342   // name with the corresponding volume path.
343   // 
344   // Records in the alignable entries the transformation matrices converting
345   // TGeo local coordinates (in the RS of alignable volumes) to the tracking
346   // system
347   // For this, this function has to run before the misalignment because we
348   // are using the ideal positions in the AliITSgeom object.
349
350   AliInfo("Add ITS alignable volumes");
351
352   if (!gGeoManager) {
353     AliFatal("TGeoManager doesn't exist !");
354     return;
355   }
356
357   if( !gGeoManager->SetAlignableEntry("ITS","ALIC_1/ITSV_1") )
358     AliFatal("Unable to set alignable entry!!");    
359
360   TString strSPD = "ITS/SPD";
361   TString strSDD = "ITS/SDD";
362   TString strSSD = "ITS/SSD";
363   TString strStave = "/Stave";
364   TString strHalfStave = "/HalfStave";
365   TString strLadder = "/Ladder";
366   TString strSector = "/Sector";
367   TString strSensor = "/Sensor";
368   TString strEntryName1;
369   TString strEntryName2;
370   TString strEntryName3;
371   TString strEntryName4;
372
373   //===== SPD layers =====
374   if (AliITSInitGeometry::SPDIsTGeoNative()) { // new SPD geometry
375
376     TString str0 = "ALIC_1/ITSV_1/ITSSPDCarbonFiberSectorV_";
377     TString str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/LAY1_STAVE_";
378     TString str1Bis = "/HALF-STAVE";
379     TString str1Tierce = "_1";
380     TString str2 = "/LAY1_LADDER_";
381   
382     TString sector;
383     TString stave;
384     TString halfStave;
385     TString module;
386
387     for(Int_t cSect = 0; cSect<10; cSect++) {
388
389       sector = str0;
390       sector += cSect+1; // this is one full sector
391       strEntryName1 = strSPD;
392       strEntryName1 += 0;
393       strEntryName1 += strSector;
394       strEntryName1 += cSect;
395       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
396         AliFatal("Unable to set alignable entry!!");    
397       //printf("%s   ==   %s\n",strEntryName1.Data(),sector.Data());
398       
399       for(Int_t cStave=0; cStave<2; cStave++) {
400         
401         stave = sector;
402         stave += str1;
403         stave += cStave;
404         strEntryName2 = strEntryName1;
405         strEntryName2 += strStave;
406         strEntryName2 += cStave;
407
408         for(Int_t cHS=0; cHS<2; cHS++) {
409
410           halfStave = stave;
411           halfStave += str1Bis;
412           halfStave += cHS;
413           halfStave += str1Tierce;
414           strEntryName3 = strEntryName2;
415           strEntryName3 += strHalfStave;
416           strEntryName3 += cHS;
417
418           if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),halfStave.Data()))
419             AliFatal(Form("Unable to set alignable entry!! %s :: %s",strEntryName3.Data(),halfStave.Data()));    
420
421           for(Int_t cLad=0; cLad<2; cLad++) {
422           
423             module = halfStave;
424             module += str2;
425             module += cLad+cHS*2;
426             strEntryName4 = strEntryName3;
427             strEntryName4 += strLadder;
428             strEntryName4 += cLad+cHS*2;
429             if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data()))
430               AliFatal("Unable to set alignable entry!!");    
431             
432             SetT2Lmatrix(strEntryName4.Data(), -0.0081, kTRUE, kTRUE);
433             // -0.0081 is the shift between the centers of alignable and sensitive volumes
434             // It is directly extracted from the new SPD geometry
435  
436           }
437         }
438       }
439     }
440     
441     str1 = "/ITSSPDSensitiveVirtualvolumeM0_1/LAY2_STAVE_";
442     str2 = "/LAY2_LADDER_";
443
444     for(Int_t cSect = 0; cSect<10; cSect++) {
445
446       sector = str0;
447       sector += cSect+1; // this is one full sector
448       strEntryName1 = strSPD;
449       strEntryName1 += 1;
450       strEntryName1 += strSector;
451       strEntryName1 += cSect;
452       
453       for(Int_t cStave=0; cStave<4; cStave++) {
454         
455         stave = sector;
456         stave += str1;
457         stave += cStave;
458         strEntryName2 = strEntryName1;
459         strEntryName2 += strStave;
460         strEntryName2 += cStave;
461
462         for(Int_t cHS=0; cHS<2; cHS++) {
463
464           halfStave = stave;
465           halfStave += str1Bis;
466           halfStave += cHS;
467           halfStave += str1Tierce;
468           strEntryName3 = strEntryName2;
469           strEntryName3 += strHalfStave;
470           strEntryName3 += cHS;
471
472           if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),halfStave.Data()))
473             AliFatal("Unable to set alignable entry!!");    
474
475           for(Int_t cLad=0; cLad<2; cLad++) {
476           
477             module = halfStave;
478             module += str2;
479             module += cLad+cHS*2;
480             strEntryName4 = strEntryName3;
481             strEntryName4 += strLadder;
482             strEntryName4 += cLad+cHS*2;
483             if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data()))
484               AliFatal("Unable to set alignable entry!!");    
485
486             SetT2Lmatrix(strEntryName4.Data(), -0.0081, kFALSE);
487           }
488         }
489       }
490     }
491
492   } else {  // else old SPD geometry
493
494     TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT12_1/I12B_";
495     TString str1 = "/I10B_";
496     TString str1Bis = "/L1H-STAVE";
497     TString str1Tierce = "_1";
498     TString str2 = "/I107_";
499   
500     TString sector;
501     TString stave;
502     TString halfStave;
503     TString module;
504
505     for(Int_t cSect = 0; cSect<10; cSect++) {
506
507       sector = str0;
508       sector += cSect+1; // this is one full sector
509       strEntryName1 = strSPD;
510       strEntryName1 += 0;
511       strEntryName1 += strSector;
512       strEntryName1 += cSect;
513       //printf("%s   ==   %s\n",strEntryName1.Data(),sector.Data());
514       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
515         AliFatal("Unable to set alignable entry!!");    
516       
517       for(Int_t cStave = 0; cStave<2; cStave++) {
518         
519         stave = sector;
520         stave += str1;
521         stave += cStave+1;
522         strEntryName2 = strEntryName1;
523         strEntryName2 += strStave;
524         strEntryName2 += cStave;
525         //printf("%s   ==   %s\n",strEntryName2.Data(),stave.Data()); // this is a stave
526
527         for(Int_t cHS=0; cHS<2; cHS++) {
528
529           halfStave = stave;
530           halfStave += str1Bis;
531           halfStave += cHS;
532           halfStave += str1Tierce;
533           strEntryName3 = strEntryName2;
534           strEntryName3 += strHalfStave;
535           strEntryName3 += cHS;
536           //printf("%s   ==   %s\n",strEntryName3.Data(),halfStave.Data()); // this is a half-stave
537           if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),halfStave.Data()))
538             AliFatal("Unable to set alignable entry!!");    
539
540           for(Int_t cLadder = 0; cLadder<2; cLadder++) {
541             
542             module = halfStave;
543             module += str2;
544             module += cLadder+cHS*2+1;
545             strEntryName4 = strEntryName3;
546             strEntryName4 += strLadder;
547             strEntryName4 += cLadder+cHS*2;
548             //printf("%s   ==   %s\n",strEntryName4.Data(),module.Data());
549             if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data()))
550               AliFatal("Unable to set alignable entry!!");    
551
552             SetT2Lmatrix(strEntryName4.Data(), -fChip1*0.0001/2., kTRUE);
553           }
554         }
555       }
556     }
557
558     str1Bis = "/L2H-STAVE";
559     str1 = "/I20B_";
560     str2 = "/I1D7_";
561
562     for(Int_t cSect = 0; cSect<10; cSect++) {
563
564       sector = str0;
565       sector += cSect+1; // this is one full sector
566       strEntryName1 = strSPD;
567       strEntryName1 += 1;
568       strEntryName1 += strSector;
569       strEntryName1 += cSect;
570       //       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),sector.Data()))
571       //        AliFatal("Unable to set alignable entry!!");    
572       // we don't need the previous lines because the whole sector is already define
573       // with first layer ...
574       
575       for(Int_t cStave =0; cStave<4; cStave++) {
576         
577         stave = sector;
578         stave += str1;
579         stave += cStave+1;
580         strEntryName2 = strEntryName1;
581         strEntryName2 += strStave;
582         strEntryName2 += cStave;
583
584         for(Int_t cHS=0; cHS<2; cHS++) {
585
586           halfStave = stave;
587           halfStave += str1Bis;
588           halfStave += cHS;
589           halfStave += str1Tierce;
590           strEntryName3 = strEntryName2;
591           strEntryName3 += strHalfStave;
592           strEntryName3 += cHS;
593           //printf("%s   ==   %s\n",strEntryName3.Data(),halfStave.Data()); // this is a half-stave
594           if(!gGeoManager->SetAlignableEntry(strEntryName3.Data(),halfStave.Data()))
595             AliFatal("Unable to set alignable entry!!");    
596
597           for(Int_t cLad =0; cLad<2; cLad++) {
598           
599             module = halfStave;
600             module += str2;
601             module += cLad+cHS*2+1;
602             strEntryName4 = strEntryName3;
603             strEntryName4 += strLadder;
604             strEntryName4 += cLad+cHS*2;
605             //printf("%s   ==   %s\n",strEntryName4.Data(),module.Data());
606             if(!gGeoManager->SetAlignableEntry(strEntryName4.Data(),module.Data()))
607               AliFatal("Unable to set alignable entry!!");
608
609             SetT2Lmatrix(strEntryName4.Data(), -fChip2*0.0001/2., kFALSE);
610           }
611         }
612       }
613     }
614   }
615
616   //===== SDD layers =====
617   if (AliITSInitGeometry::SDDIsTGeoNative()) { // new SDD geometry
618     
619     TString str0 = "/ALIC_1/ITSV_1/ITSsddLayer3_1/ITSsddLadd_"; // SDD layer1
620     TString str1 = "/ITSsddSensor3_";
621     TString str2 = "/ITSsddWafer3_1";
622     TString ladder;
623     TString wafer;
624
625     for(Int_t c1 = 0; c1<14; c1++) {
626
627       ladder = str0;
628       ladder += c1; // the set of wafers from one ladder
629       strEntryName1 = strSDD;
630       strEntryName1 += 2;
631       strEntryName1 +=strLadder;
632       strEntryName1 += c1;
633       //printf("%s    ==    %s\n",strEntryName1.Data(),ladder.Data());
634       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
635         AliFatal("Unable to set alignable entry!!");    
636
637       for(Int_t c2 =0; c2<6; c2++) {
638
639         wafer = ladder;
640         wafer += str1;
641         wafer += c2;
642         wafer += str2;    // one wafer
643         strEntryName2 = strEntryName1;
644         strEntryName2 += strSensor;
645         strEntryName2 += c2;
646         //printf("%s    ==    %s\n",strEntryName2.Data(),wafer.Data());
647         if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
648           AliFatal("Unable to set alignable entry!!");
649
650         SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE, c2>=3);
651       }
652     }
653
654     str0 = "/ALIC_1/ITSV_1/ITSsddLayer4_1/ITSsddLadd_"; // SDD layer2
655     str1 = "/ITSsddSensor4_";
656     str2 = "/ITSsddWafer4_1";
657     
658     for(Int_t c1 = 0; c1<22; c1++) {
659
660       ladder = str0;
661       ladder += c1; // the set of wafers from one ladder
662       strEntryName1 = strSDD;
663       strEntryName1 += 3;
664       strEntryName1 += strLadder;
665       strEntryName1 += c1;
666       //printf("%s    ==    %s\n",strEntryName1.Data(),ladder.Data());
667       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
668         AliFatal("Unable to set alignable entry!!");    
669
670       for(Int_t c2 =0; c2<8; c2++) {
671
672         wafer = ladder;
673         wafer += str1;
674         wafer += c2;
675         wafer += str2;    // one wafer
676         strEntryName2 = strEntryName1;
677         strEntryName2 += strSensor;
678         strEntryName2 += c2;
679         //printf("%s    ==    %s\n",strEntryName2.Data(),wafer.Data());
680         if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
681           AliFatal("Unable to set alignable entry!!");  
682
683         SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE, c2>=4);
684       }
685     }
686
687   } else {  // else old SDD geometry
688
689     TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I004_";
690     TString str1 = "/I302_";
691     
692     TString ladder;
693     TString wafer;
694
695     for(Int_t c1 = 1; c1<=14; c1++){
696
697       ladder = str0;
698       ladder += c1; // the set of wafers from one ladder
699       strEntryName1 = strSDD;
700       strEntryName1 += 2;
701       strEntryName1 +=strLadder;
702       strEntryName1 += (c1-1);
703       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
704         AliFatal("Unable to set alignable entry!!");    
705       //printf("%s    ==    %s\n",strEntryName1.Data(),ladder.Data());
706
707       for(Int_t c2 =1; c2<=6; c2++){
708
709         wafer = ladder;
710         wafer += str1;
711         wafer += c2;    // one wafer
712         strEntryName2 = strEntryName1;
713         strEntryName2 += strSensor;
714         strEntryName2 += (c2-1);
715         if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
716           AliFatal("Unable to set alignable entry!!");    
717         //printf("%s    ==    %s\n",strEntryName2.Data(),wafer.Data());
718
719         SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE);
720       }
721     }
722
723     str0 = "ALIC_1/ITSV_1/ITSD_1/IT34_1/I005_";
724     str1 = "/I402_";
725
726     for(Int_t c1 = 1; c1<=22; c1++){
727
728       ladder = str0;
729       ladder += c1; // the set of wafers from one ladder
730       strEntryName1 = strSDD;
731       strEntryName1 += 3;
732       strEntryName1 +=strLadder;
733       strEntryName1 += (c1-1);
734       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
735         AliFatal("Unable to set alignable entry!!");    
736       //printf("%s    ==    %s\n",strEntryName1.Data(),ladder.Data());
737
738       for(Int_t c2 =1; c2<=8; c2++){
739
740         wafer = ladder;
741         wafer += str1;
742         wafer += c2;    // one wafer
743         strEntryName2 = strEntryName1;
744         strEntryName2 += strSensor;
745         strEntryName2 += (c2-1);
746         if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
747           AliFatal("Unable to set alignable entry!!");    
748         //printf("%s    ==    %s\n",strEntryName2.Data(),wafer.Data());
749
750         SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE);
751       }
752     }
753   }   // end SDD
754
755   //===== SSD layers =====
756   if (AliITSInitGeometry::SSDIsTGeoNative()) { // new SSD geometry
757
758     TString str0 = "/ALIC_1/ITSV_1/ITSssdLayer5_1/ITSssdLay5Ladd_"; // SSD layer1
759     TString str1 = "/ITSsddSensor5_";
760     TString str2 = "";
761     TString ladder;
762     TString wafer;
763
764     for(Int_t c1 = 0; c1<34; c1++) {
765
766       ladder = str0;
767       ladder += c1; // the set of wafers from one ladder
768       strEntryName1 = strSSD;
769       strEntryName1 += 4;
770       strEntryName1 += strLadder;
771       strEntryName1 += c1;
772       //printf("%s    ==    %s\n",strEntryName1.Data(),ladder.Data());
773       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
774         AliFatal("Unable to set alignable entry!!");    
775
776       for(Int_t c2 =0; c2<22; c2++) {
777
778         wafer = ladder;
779         wafer += str1;
780         wafer += c2;
781         //wafer += str2;    // one wafer
782         strEntryName2 = strEntryName1;
783         strEntryName2 += strSensor;
784         strEntryName2 += c2;
785         //printf("%s    ==    %s\n",strEntryName2.Data(),wafer.Data());
786         if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
787           AliFatal("Unable to set alignable entry!!");
788
789         SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE, kFALSE);
790       }
791     }
792
793     str0 = "/ALIC_1/ITSV_1/ITSssdLayer6_1/ITSssdLay6Ladd_"; // SSD layer2
794     str1 = "/ITSsddSensor6_";
795     str2 = "";
796     
797     for(Int_t c1 = 0; c1<38; c1++) {
798
799       ladder = str0;
800       ladder += c1; // the set of wafers from one ladder
801       strEntryName1 = strSSD;
802       strEntryName1 += 5;
803       strEntryName1 += strLadder;
804       strEntryName1 += c1;
805       //printf("%s    ==    %s\n",strEntryName1.Data(),ladder.Data());
806       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
807         AliFatal("Unable to set alignable entry!!");    
808
809       for(Int_t c2 =0; c2<25; c2++) {
810
811         wafer = ladder;
812         wafer += str1;
813         wafer += c2;
814         //wafer += str2;    // one wafer
815         strEntryName2 = strEntryName1;
816         strEntryName2 += strSensor;
817         strEntryName2 += c2;
818         //printf("%s    ==    %s\n",strEntryName2.Data(),wafer.Data());
819         if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
820           AliFatal("Unable to set alignable entry!!");  
821
822         SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE, kFALSE);
823       }
824     }
825     
826   } else { // else old SSD geometry
827     TString str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I565_";
828     TString str1 = "/I562_";
829     TString ladder;
830     TString wafer;
831
832     for(Int_t c1 = 1; c1<=34; c1++){
833       
834       ladder = str0;
835       ladder += c1; // the set of wafers from one ladder
836       strEntryName1 = strSSD;
837       strEntryName1 += 4;
838       strEntryName1 +=strLadder;
839       strEntryName1 += (c1-1);
840       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
841         AliFatal("Unable to set alignable entry!!");    
842       //printf("%s    ==    %s\n",strEntryName1.Data(),ladder.Data());
843       
844       for(Int_t c2 = 1; c2<=22; c2++){
845         
846         wafer = ladder;
847         wafer += str1;
848         wafer += c2;     // one wafer
849         strEntryName2 = strEntryName1;
850         strEntryName2 += strSensor;
851         strEntryName2 += (c2-1);
852         if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
853           AliFatal("Unable to set alignable entry!!");    
854         //printf("%s    ==    %s\n",strEntryName2.Data(),wafer.Data());
855         
856         SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE);
857       }
858     }
859     
860     str0 = "ALIC_1/ITSV_1/ITSD_1/IT56_1/I569_";
861     str1 = "/I566_";
862     
863     for(Int_t c1 = 1; c1<=38; c1++){
864       
865       ladder = str0;
866       ladder += c1; // the set of wafers from one ladder
867       strEntryName1 = strSSD;
868       strEntryName1 += 5;
869       strEntryName1 +=strLadder;
870       strEntryName1 += (c1-1);
871       if(!gGeoManager->SetAlignableEntry(strEntryName1.Data(),ladder.Data()))
872         AliFatal("Unable to set alignable entry!!");    
873       //printf("%s    ==    %s\n",strEntryName1.Data(),ladder.Data());
874       
875       for(Int_t c2 = 1; c2<=25; c2++){
876         
877         wafer = ladder;
878         wafer += str1;
879         wafer += c2;     // one wafer
880         strEntryName2 = strEntryName1;
881         strEntryName2 += strSensor;
882         strEntryName2 += (c2-1);
883         if(!gGeoManager->SetAlignableEntry(strEntryName2.Data(),wafer.Data()))
884           AliFatal("Unable to set alignable entry!!");    
885         //printf("%s    ==    %s\n",strEntryName2.Data(),wafer.Data());
886         
887         SetT2Lmatrix(strEntryName2.Data(), 0, kFALSE);
888       }
889     }
890   } // end SSD geometry 
891 }
892
893 //______________________________________________________________________
894 void AliITSv11Hybrid::BuildGeometry(){
895     //    Geometry builder for the ITS version 10. Event Display geometry.
896     // Inputs:
897     //   none.
898     // Outputs:
899     //   none.
900     // Return:
901     //   none.
902
903     TNode *node, *top;
904     
905     const Int_t kColorITS=kYellow;
906     //
907     top = gAlice->GetGeometry()->GetNode("alice");
908
909
910     new TTUBE("S_layer1","Layer1 of ITS","void",
911               3.8095,3.8095+1.03*9.36/100.,14.35);
912     top->cd();
913     node = new TNode("Layer1","Layer1","S_layer1",0,0,0,"");
914     node->SetLineColor(kColorITS);
915     fNodes->Add(node);
916
917     new TTUBE("S_layer2","Layer2 of ITS","void",7.,7.+1.03*9.36/100.,14.35);
918     top->cd();
919     node = new TNode("Layer2","Layer2","S_layer2",0,0,0,"");
920     node->SetLineColor(kColorITS);
921     fNodes->Add(node);
922
923     new TTUBE("S_layer3","Layer3 of ITS","void",15.,15.+0.94*9.36/100.,25.1);
924     top->cd();
925     node = new TNode("Layer3","Layer3","S_layer3",0,0,0,"");
926     node->SetLineColor(kColorITS);
927     fNodes->Add(node);
928
929     new TTUBE("S_layer4","Layer4 of ITS","void",24.1,24.1+0.95*9.36/100.,32.1);
930     top->cd();
931     node = new TNode("Layer4","Layer4","S_layer4",0,0,0,"");
932     node->SetLineColor(kColorITS);
933     fNodes->Add(node);
934
935     new TTUBE("S_layer5","Layer5 of ITS","void",
936               38.5,38.5+0.91*9.36/100.,49.405);
937     top->cd();
938     node = new TNode("Layer5","Layer5","S_layer5",0,0,0,"");
939     node->SetLineColor(kColorITS);
940     fNodes->Add(node);
941
942     new TTUBE("S_layer6","Layer6 of ITS","void",
943               43.5765,43.5765+0.87*9.36/100.,55.27);
944     top->cd();
945     node = new TNode("Layer6","Layer6","S_layer6",0,0,0,"");
946     node->SetLineColor(kColorITS);
947     fNodes->Add(node);
948 }
949
950 //______________________________________________________________________
951 void AliITSv11Hybrid::CreateGeometry() {
952
953   // Create the geometry and insert it in ALIC
954   // It calls first the CreateOldGeometry() routine which add the
955   // pieces coming from the old v10 geometry. Then the pieces from
956   // the new geometry are inserting in the mother volume ITSV.
957
958   TGeoManager *geoManager = gGeoManager;
959
960   CreateOldGeometry();
961   TGeoVolume *vITS = geoManager->GetVolume("ITSV");
962
963   TGeoVolume *vIS02 = geoManager->GetVolume("IS02");
964
965
966
967   const Char_t *cvsDate="$Date$";
968   const Char_t *cvsRevision="$Revision$";
969   const Int_t kLength=100;
970   Char_t vstrng[kLength];
971   if(fInitGeom.WriteVersionString(vstrng,kLength,(AliITSVersion_t)IsVersion(),
972                              fMinorVersion,cvsDate,cvsRevision))
973     vITS->SetTitle(vstrng);
974
975   if (AliITSInitGeometry::SPDIsTGeoNative()) {
976     fSPDgeom->SPDSector(vITS);
977   }
978
979   if (AliITSInitGeometry::SDDIsTGeoNative()) {
980     fSDDgeom->Layer3(vITS);
981     fSDDgeom->Layer4(vITS);
982     fSDDgeom->ForwardLayer3(vIS02);
983     fSDDgeom->ForwardLayer4(vIS02);
984   }
985   if (AliITSInitGeometry::SSDIsTGeoNative()) {
986     fSSDgeom->Layer5(vITS);
987     fSSDgeom->Layer6(vITS);
988   }
989 }
990
991 //______________________________________________________________________
992 void AliITSv11Hybrid::CreateOldGeometry(){
993   //    This routine defines and creates some pieces of the geometry
994   // of version 10 (AliITSvPPRasymmFMD)
995
996     //Begin_Html
997     /*
998       <img src="picts/ITS/ITS_full_vPPRasymm.jpg">
999       </pre>
1000       <br clear=left>
1001       <font size=+2 color=red>
1002       <p>This shows the full ITS geometry.
1003       </font>
1004       <img src="picts/ITS/ITS_SPD_Barrel_vPPRasymm.jpg">
1005       </pre>
1006       < br clear=left>
1007       <font size=+2 color=red>
1008       <p>This shows the full SPD Barrel of the ITS geometry.
1009       </font>
1010       <img src="picts/ITS/ITS_SDD_Barrel_vPPRasymm.jpg">
1011       </pre>
1012       <br clear=left>
1013       <font size=+2 color=red>
1014       <p>This shows the full SDD Barrel of the ITS geometry.
1015       </font>
1016       <img src="picts/ITS/ITS_SSD_Barrel_vPPRasymm.jpg">
1017       </pre>
1018       <br clear=left>
1019       <font size=+2 color=red>
1020       <p>This shows the full SSD Barrel of the ITS geometry.
1021       </font>
1022     */
1023     //End_Html
1024     //INNER RADII OF THE SILICON LAYERS 
1025     // Float_t rl[6]    = { 3.8095,7.,15.,24.,38.1,43.5765 };   
1026     //THICKNESSES OF LAYERS (in % radiation kLength)
1027     Float_t drl[6]   = { 1.03,1.03,0.94,0.95,0.91,0.87 };   
1028     //HALF LENGTHS OF LAYERS  
1029     // Float_t dzl[6]   = { 14.35,14.35,25.1,32.1,49.405,55.27 };
1030     //LENGTHS OF END-LADDER BOXES (ALL INCLUDED)
1031     // Float_t dzb[6]   = { 12.4,12.4,13.5,15.,7.5,7.5 };   
1032     //THICKNESSES OF END-LADDER BOXES (ALL INCLUDED)
1033     // Float_t drb[6]   = { rl[1]-rl[0],0.2,5.,5.,4.,4. };
1034
1035
1036     Float_t dits[100], rlim, zmax;
1037     // Float_t zpos;
1038     // Float_t pcits[50]
1039     Float_t ztpc;
1040     Int_t idrotm[1999], i;
1041     Float_t dgh[100];
1042
1043     // Define some variables for SPD
1044
1045     Float_t dits1[3], di101[3], di107[3], di10b[3], di106[3];// for layer 1 
1046     //Float_t di103[3], di10a[3], di102[3];                    // for layer 1
1047     Float_t dits2[3], di1d1[3], di1d7[3], di20b[3], di1d6[3];// for layer 2
1048     //Float_t di1d3[3], di20a[3], di1d2[3];                    // for layer 2  
1049     Float_t di108[3];
1050     //Float_t di104[3];                              // for both layers
1051
1052     Float_t ddet1=200.;     // total detector thickness on layer 1 (micron)
1053     Float_t dchip1=200.;    // total chip thickness on layer 1 (micron)
1054   
1055     Float_t ddet2=200.;     // total detector thickness on layer 2 (micron)
1056     Float_t dchip2=200.;    // total chip thickness on layer 2 (micron)
1057
1058     Float_t dbus=300.;      // total bus thickness on both layers (micron)
1059
1060     ddet1 = GetThicknessDet1();
1061     ddet2 = GetThicknessDet2();
1062     dchip1 = GetThicknessChip1();
1063     dchip2 = GetThicknessChip2();    
1064
1065     if(ddet1 < 100. || ddet1 > 300.) {
1066       AliWarning("The detector thickness for layer 1 is outside ");
1067       AliWarning("the range of [100,300] microns. The default value of 200 microns ");
1068       AliWarning("will be used.");
1069         ddet1=200.;
1070     } // end if
1071   
1072     if(ddet2 < 100. || ddet2 > 300.) {
1073       AliWarning("The detector thickness for layer 2 is outside ");
1074       AliWarning("the range of [100,300] microns. The default value of 200 microns ");
1075       AliWarning("will be used.");
1076         ddet2=200.;
1077     }// end if
1078   
1079     if(dchip1 < 100. || dchip1 > 300.) {
1080       AliWarning("The chip thickness for layer 1 is outside");
1081       AliWarning("the range of [100,300] microns. The default value of 200 microns");
1082       AliWarning("will be used.");
1083       dchip1=200.;
1084     }// end if
1085   
1086     if(dchip2 < 100. || dchip2 > 300.) {
1087       AliWarning("The chip thickness for layer 2 is outside");
1088       AliWarning("the range of [100,300] microns. The default value of 200 microns");
1089       AliWarning("will be used");
1090       dchip2=200.;
1091     }// end if
1092
1093     Int_t rails = 1;  // flag for rails (1 --> rails in; 0 --> rails out)
1094
1095     Int_t fluid = 1;  // flag for the cooling fluid (1 --> water; 0 --> freon)
1096                       // This option is maintained for SDD and SSD only
1097                       // For SPD the cooling liquid is C4F10
1098     rails = GetRails();
1099
1100     fluid = GetCoolingFluid();
1101
1102     if(rails != 0 && rails != 1) {
1103       AliWarning("The switch for rails is not set neither");
1104       AliWarning("to 0 (rails out) nor to 1 (rails in). The default value of");
1105       AliWarning("1 (rails in) will be used");
1106       rails=1;
1107     }// end if
1108
1109
1110     AliDebug(1,Form("Detector thickness on layer 1 is set to %f microns",ddet1));
1111     AliDebug(1,Form("Chip thickness on layer 1 is set to %f microns",dchip1));
1112     AliDebug(1,Form("Detector thickness on layer 2 is set to %f microns",ddet2));
1113     AliDebug(1,Form("Chip thickness on layer 2 is set to %f microns",dchip2));
1114     if(rails == 0 ) {
1115       AliDebug(1,"Rails are out.");
1116     } else {
1117       AliDebug(1,"Rails are in.");
1118     }// end if
1119
1120     ddet1  = ddet1*0.0001/2.; // conversion from tot length in um to half in cm
1121     ddet2  = ddet2*0.0001/2.; // conversion from tot length in um to half in cm
1122     dchip1 = dchip1*0.0001/2.;// conversion from tot length in um to half in cm
1123     dchip2 = dchip2*0.0001/2.;// conversion from tot length in um to half in cm
1124     dbus   = dbus*0.0001/2.;  // conversion from tot length in um to half in cm
1125
1126     Float_t deltax, deltay; 
1127
1128     //Int_t thickness = fMinorVersion/10;
1129     //Int_t option    = fMinorVersion - 10*thickness;
1130
1131
1132     // Define some variables for SDD
1133
1134     Float_t sin30, cos30;
1135
1136     // SDD electronics+services main volumes
1137     Float_t iI018dits[3], iI024dits[3], iI047dits[3], iI048dits[3];
1138
1139     // SDD detector ladder
1140
1141     Float_t iI302dits[3], iI402dits[3], iI004dits[3], iI005dits[3];
1142     Float_t ySDDsep = 0.20;
1143     Float_t ySDD;
1144     Int_t   iSDD;
1145     Float_t zSDDlay3[6] = { 18.55, 10.95, 3.70, -3.70,-11.20,-18.35};
1146     Float_t zSDDlay4[8] = { 25.75, 18.60, 11.00, 3.70, -3.70,-11.20,
1147                              -18.45,-26.05};
1148
1149     // ladder foot and end-ladder (frame and cooling)
1150     Float_t iI028dits[3], iI420dits[3], iI421dits[3], iI422dits[6], iI423dits[3];
1151     Float_t iI424dits[3], xI424, yI424;
1152     Float_t iI425dits[3];
1153     Int_t    indI425;
1154     Float_t iI029dits[4], iI030dits[4], iI031dits[3], iI032dits[3];
1155
1156     // SDD ladder frame and cooling
1157     Float_t iSDDCoolPipe[3] = {1.7000, -0.5500, 0.0000};
1158     Float_t iI035dits[3], iI037dits[3], iI038dits[3];
1159     Float_t iI039dits[3], xI039, yI039;
1160     Float_t iI041dits[5];
1161
1162     // SDD hybrid, chips and capacitors
1163     Float_t iI050dits[3], xI050, yI050;
1164     Float_t iI052dits[3], xI052, yI052;
1165     Float_t iI042dits[3], xI042, yI042;
1166     Float_t xI042space = 0.17;
1167     Float_t iI043dits[3], xI043, yI043;
1168     Float_t xI043space = 0.17;
1169     Float_t zchip, zChipSpace;
1170     Float_t iI051dits[3], xI051, yI051, zI051, yI051space, xcap;
1171     Int_t     ichip, icap;
1172
1173     // SDD microcables
1174     Float_t iI044dits[4], xI044, yI044, volI044;
1175     Float_t xHV, yHV, zHV, xLV, yLV, zLV;
1176     Char_t   nameHV[5], nameLV[5];
1177
1178
1179     // Define media off-set
1180   
1181     Int_t *idtmed = fIdtmed->GetArray()-199;
1182
1183   
1184     // Rotation matrices
1185     
1186     // SPD - option 'b' (this is the default)
1187
1188     //if (option == 2) {
1189     if (! AliITSInitGeometry::SPDIsTGeoNative()) {
1190         AliMatrix(idrotm[201],90.0,0.0,90.0,90.0,0.0,0.0);
1191         AliMatrix(idrotm[202],90.0,90.0,90.0,0.0,0.0,0.0);
1192         AliMatrix(idrotm[203],90.0,350.0,90.0,260.0,0.0,0.0);
1193         AliMatrix(idrotm[204],90.0,170.0,90.0,80.0,0.0,0.0);
1194         AliMatrix(idrotm[205],90.0,10.0,90.0,100.0,0.0,0.0);
1195         AliMatrix(idrotm[206],90.0,190.0,90.0,280.0,0.0,0.0);
1196         AliMatrix(idrotm[207],90.0,342.0,90.0,72.0,0.0,0.0);
1197         AliMatrix(idrotm[208],90.0,156.999893,90.0,246.999893,0.0,0.0);
1198         AliMatrix(idrotm[209],90.0,147.999802,90.0,237.999893,0.0,0.0);
1199         AliMatrix(idrotm[210],90.0,138.999802,90.0,228.999802,0.0,0.0);
1200         AliMatrix(idrotm[211],90.0,129.999802,90.0,219.999802,0.0,0.0);
1201         AliMatrix(idrotm[212],90.0,36.7896,90.0,126.789597,0.0,0.0);
1202         AliMatrix(idrotm[213],90.0,343.579712,90.0,73.579697,0.0,0.0);
1203         AliMatrix(idrotm[214],90.0,95.413696,90.0,185.413696,0.0,0.0);
1204         AliMatrix(idrotm[215],90.0,5.4141,90.0,95.414101,0.0,0.0);
1205         AliMatrix(idrotm[216],90.0,318.296906,90.0,48.296902,0.0,0.0);
1206         AliMatrix(idrotm[217],90.0,67.000099,90.0,157.000107,0.0,0.0);
1207         AliMatrix(idrotm[218],90.0,337.003998,90.0,67.003998,0.0,0.0);
1208         AliMatrix(idrotm[219],90.0,247.000305,90.0,337.000305,0.0,0.0);
1209         AliMatrix(idrotm[220],90.0,305.633514,90.0,35.633499,0.0,0.0);
1210
1211         AliMatrix(idrotm[221],90.0,58.000198,90.0,148.000198,0.0,0.0);
1212         AliMatrix(idrotm[222],90.0,327.997101,90.0,57.997101,0.0,0.0);
1213         AliMatrix(idrotm[223],90.0,237.994202,90.0,327.994202,0.0,0.0);
1214         AliMatrix(idrotm[224],90.0,296.627502,90.0,26.627399,0.0,0.0);
1215         AliMatrix(idrotm[225],90.0,48.994099,90.0,138.994095,0.0,0.0);
1216         AliMatrix(idrotm[226],90.0,318.990997,90.0,48.991001,0.0,0.0);
1217         AliMatrix(idrotm[227],90.0,228.988205,90.0,318.98819,0.0,0.0);
1218         AliMatrix(idrotm[228],90.0,287.621399,90.0,17.621401,0.0,0.0);
1219         AliMatrix(idrotm[229],90.0,39.988098,90.0,129.988098,0.0,0.0);
1220         AliMatrix(idrotm[230],90.0,309.984985,90.0,39.985001,0.0,0.0);
1221         AliMatrix(idrotm[231],90.0,327.2612,90.0,57.2612,0.0,0.0);
1222         AliMatrix(idrotm[232],90.0,237.261398,90.0,327.261414,0.0,0.0);
1223         AliMatrix(idrotm[233],90.0,252.000504,90.0,342.000488,0.0,0.0);
1224         AliMatrix(idrotm[234],90.0,71.9991,90.0,161.9991,0.0,0.0);
1225         AliMatrix(idrotm[235],90.0,270.0,90.0,0.0,0.0,0.0);
1226         AliMatrix(idrotm[236],90.0,180.013702,90.0,270.013702,0.0,0.0);
1227         AliMatrix(idrotm[237],90.0,90.0,90.0,180.0,0.0,0.0);
1228         AliMatrix(idrotm[238],90.0,180.0,90.0,270.0,0.0,0.0);
1229         AliMatrix(idrotm[239],90.0,162.0,90.0,252.0,0.0,0.0);
1230         AliMatrix(idrotm[240],90.0,310.0,90.0,40.0,0.0,0.0);
1231         AliMatrix(idrotm[241],90.0,319.0,90.0,49.0,0.0,0.0);
1232         AliMatrix(idrotm[242],90.0,328.0,90.0,58.0,0.0,0.0);
1233         AliMatrix(idrotm[243],90.0,337.0,90.0,67.0,0.0,0.0);
1234         AliMatrix(idrotm[244],90.0,216.0,90.0,306.0,0.0,0.0);
1235         AliMatrix(idrotm[245],90.0,36.0,90.0,126.0,0.0,0.0);
1236         AliMatrix(idrotm[246],90.0,108.0,90.0,198.0,0.0,0.0);
1237         AliMatrix(idrotm[247],90.0,144.0,90.0,234.0,0.0,0.0);
1238         AliMatrix(idrotm[248],90.0,288.0,90.0,18.0,0.0,0.0);
1239         AliMatrix(idrotm[249],90.0,324.0,90.0,54.0,0.0,0.0);  
1240         AliMatrix(idrotm[1003],90.0,73.5,90.0,163.5,0.0,0.0);
1241         AliMatrix(idrotm[1011],90.0,342.0,90.0,72.0,0.0,0.0);
1242         AliMatrix(idrotm[1039],90.0,72.0,90.0,162.0,0.0,0.0);
1243         AliMatrix(idrotm[1043],90.0,66.91,90.0,156.91,0.0,0.0);
1244         AliMatrix(idrotm[1065],90.0,144.0,90.0,234.0,0.0,0.0);
1245         AliMatrix(idrotm[1078],90.0,180.0,90.0,270.0,0.0,0.0);
1246         AliMatrix(idrotm[1088],90.0,57.41,90.0,147.41,0.0,0.0);
1247         AliMatrix(idrotm[1089],90.0,333.0,90.0,63.0,0.0,0.0);
1248         AliMatrix(idrotm[1090],90.0,351.0,90.0,81.0,0.0,0.0);
1249         AliMatrix(idrotm[1091],90.0,216.0,90.0,306.0,0.0,0.0);
1250         AliMatrix(idrotm[1092],90.0,27.0,90.0,117.0,0.0,0.0);
1251         AliMatrix(idrotm[1093],90.0,18.0,90.0,108.0,0.0,0.0);
1252         AliMatrix(idrotm[1094],90.0,9.0,90.0,99.0,0.0,0.0);
1253         AliMatrix(idrotm[1104],90.0,252.0,90.0,342.0,0.0,0.0);
1254         AliMatrix(idrotm[1106],90.0,36.0,90.0,126.0,0.0,0.0);
1255         AliMatrix(idrotm[1107],90.0,108.0,90.0,198.0,0.0,0.0);
1256         AliMatrix(idrotm[1108],90.0,324.0,90.0,54.0,180.0,0.0);
1257         AliMatrix(idrotm[1109],90.0,0.0,90.0,90.0,180.0,0.0);
1258         AliMatrix(idrotm[1110],90.0,36.0,90.0,126.0,180.0,0.0);
1259         AliMatrix(idrotm[1111],90.0,72.0,90.0,162.0,180.0,0.0);
1260         AliMatrix(idrotm[1112],90.0,108.0,90.0,198.0,180.0,0.0);
1261         AliMatrix(idrotm[1113],90.0,144.0,90.0,234.0,180.0,0.0);
1262         AliMatrix(idrotm[1114],90.0,180.0,90.0,270.0,180.0,0.0);
1263         AliMatrix(idrotm[1115],90.0,216.0,90.0,306.0,180.0,0.0);
1264         AliMatrix(idrotm[1116],90.0,252.0,90.0,342.0,180.0,0.0);
1265         AliMatrix(idrotm[1117],90.0,288.0,90.0,18.0,0.0,0.0);
1266         AliMatrix(idrotm[1118],90.0,288.0,90.0,18.0,180.0,0.0);
1267         AliMatrix(idrotm[1130],90.0,324.0,90.0,54.0,0.0,0.0);
1268     }// end if option==2
1269     
1270     // SDD
1271     if (! AliITSInitGeometry::SDDIsTGeoNative()) {
1272     AliMatrix(idrotm[301],0.0,0.0,90.0,90.0,90.0,180.0);  
1273     AliMatrix(idrotm[302],0.0,0.0,90.0,90.0,90.0,0.0);
1274     AliMatrix(idrotm[303],180.0,0.0,90.0,90.0,90.0,0.0); 
1275     AliMatrix(idrotm[304],180.0,0.0,90.0,90.0,90.0,180.0); 
1276     AliMatrix(idrotm[305],90.0,347.14,90.0,77.14,0.0,0.0); 
1277     AliMatrix(idrotm[306],90.0,321.43,90.0,51.43,0.0,0.0); 
1278     AliMatrix(idrotm[307],90.0,295.71,90.0,25.71,0.0,0.0);
1279     AliMatrix(idrotm[308],90.0,244.29,90.0,334.29,0.0,0.0);
1280     AliMatrix(idrotm[309],90.0,218.57,90.0,308.57,0.0,0.0);
1281     AliMatrix(idrotm[310],90.0,167.14,90.0,257.14,0.0,0.0);
1282     AliMatrix(idrotm[311],90.0,141.43,90.0,231.43,0.0,0.0);  
1283     AliMatrix(idrotm[312],90.0,0.0,0.0,0.0,90.0,270.0);
1284     AliMatrix(idrotm[313],90.0,115.71,90.0,205.71,0.0,0.0); 
1285     AliMatrix(idrotm[314],90.0,335.45,90.0,65.45,0.0,0.0); 
1286     AliMatrix(idrotm[315],90.0,319.09,90.0,49.09,0.0,0.0); 
1287     AliMatrix(idrotm[316],90.0,302.73,90.0,32.73,0.0,0.0); 
1288     AliMatrix(idrotm[317],90.0,286.36,90.0,16.36,0.0,0.0);
1289     AliMatrix(idrotm[318],90.0,270.0,90.0,360.0,0.0,0.0);
1290     AliMatrix(idrotm[319],90.0,253.64,90.0,343.64,0.0,0.0);
1291     AliMatrix(idrotm[320],90.0,237.27,90.0,327.27,0.0,0.0);
1292     AliMatrix(idrotm[321],90.0,12.86,90.0,102.86,0.0,0.0);  
1293     AliMatrix(idrotm[322],90.0,220.91,90.0,310.91,0.0,0.0);
1294     AliMatrix(idrotm[323],90.0,204.55,90.0,294.55,0.0,0.0); 
1295     AliMatrix(idrotm[324],90.0,188.18,90.0,278.18,0.0,0.0); 
1296     AliMatrix(idrotm[325],90.0,171.82,90.0,261.82,0.0,0.0); 
1297     AliMatrix(idrotm[326],90.0,155.45,90.0,245.45,0.0,0.0); 
1298     AliMatrix(idrotm[327],90.0,139.09,90.0,229.09,0.0,0.0);
1299     AliMatrix(idrotm[328],90.0,122.73,90.0,212.73,0.0,0.0);
1300     AliMatrix(idrotm[329],90.0,106.36,90.0,196.36,0.0,0.0);
1301     AliMatrix(idrotm[330],90.0,73.64,90.0,163.64,0.0,0.0);    
1302     AliMatrix(idrotm[331],90.0,40.91,90.0,130.91,0.0,0.0);  
1303     AliMatrix(idrotm[332],90.0,24.55,90.0,114.55,0.0,0.0);
1304     AliMatrix(idrotm[333],90.0,38.57,90.0,128.57,0.0,0.0); 
1305     AliMatrix(idrotm[334],90.0,351.82,90.0,81.82,0.0,0.0); 
1306     AliMatrix(idrotm[335],90.0,8.18,90.0,98.18,0.0,0.0); 
1307     AliMatrix(idrotm[336],90.0,64.29,90.0,154.29,0.0,0.0); 
1308     AliMatrix(idrotm[337],111.0,300.0,21.0,300.0,90.0,30.0);
1309     AliMatrix(idrotm[338],69.0,240.0,159.0,240.0,90.0,150.0);
1310     AliMatrix(idrotm[339],111.0,240.0,21.0,240.0,90.0,150.0);
1311     AliMatrix(idrotm[340],69.0,300.0,159.0,300.0,90.0,30.0);  
1312     AliMatrix(idrotm[341],128.0,0.0,38.0,0.0,90.0,270.0);  
1313     AliMatrix(idrotm[342],90.0,240.0,180.0,0.0,90.0,330.);
1314     AliMatrix(idrotm[343],90.0,120.0,180.0,0.0,90.0,210.0); 
1315     AliMatrix(idrotm[344],90.0,0.0,180.0,0.0,90.0,90.0); 
1316     AliMatrix(idrotm[345],90.0,180.0,90.0,90.0,0.0,0.0); 
1317     AliMatrix(idrotm[346],90.0,300.0,90.0,30.0,0.0,0.0); 
1318     AliMatrix(idrotm[347],90.0,240.0,90.0,150.0,0.0,0.0);
1319     AliMatrix(idrotm[348],90.0,180.0,0.0,0.0,90.0,270.0);
1320     AliMatrix(idrotm[349],90.0,235.0,90.0,145.0,0.0,0.0);
1321     AliMatrix(idrotm[350],90.0,90.0,90.0,180.0,0.0,0.0);  
1322     AliMatrix(idrotm[351],90.0,305.0,90.0,35.0,0.0,0.0);  
1323     AliMatrix(idrotm[352],0.0,0.0,90.0,0.0,90.0,90.0);
1324     AliMatrix(idrotm[353],90.0,60.0,90.0,150.0,0.0,0.0); 
1325     AliMatrix(idrotm[354],90.0,120.0,90.0,30.0,0.0,0.0); 
1326     AliMatrix(idrotm[355],90.0,180.0,90.0,90.0,180.0,0.0); 
1327     AliMatrix(idrotm[356],90.0,270.0,90.0,0.0,0.0,0.0); 
1328     AliMatrix(idrotm[366],90.0,57.27,90.0,147.27,0.0,0.0); 
1329     AliMatrix(idrotm[386],90.0,192.86,90.0,282.86,0.0,0.0);
1330     }
1331
1332     // SSD
1333     if (! AliITSInitGeometry::SSDIsTGeoNative()) {
1334     AliMatrix(idrotm[501],90.0,148.24,90.0,238.24,0.0,0.0);
1335     AliMatrix(idrotm[503],90.0,137.65,90.0,227.65,0.0,0.0); 
1336     AliMatrix(idrotm[504],90.0,127.06,90.0,217.06,0.0,0.0);  
1337     AliMatrix(idrotm[505],90.0,116.47,90.0,206.47,0.0,0.0);  
1338     AliMatrix(idrotm[506],90.0,105.88,90.0,195.88,0.0,0.0);  
1339     AliMatrix(idrotm[507],90.0,95.29,90.0,185.29,0.0,0.0);  
1340     AliMatrix(idrotm[508],90.0,84.71,90.0,174.71,0.0,0.0);
1341     AliMatrix(idrotm[509],90.0,74.12,90.0,164.12,0.0,0.0);
1342     AliMatrix(idrotm[510],90.0,63.53,90.0,153.53,0.0,0.0);  
1343     AliMatrix(idrotm[511],90.0,52.94,90.0,142.94,0.0,0.0);
1344     AliMatrix(idrotm[512],90.0,42.35,90.0,132.35,0.0,0.0);
1345     AliMatrix(idrotm[513],90.0,31.76,90.0,121.76,0.0,0.0); 
1346     AliMatrix(idrotm[514],90.0,10.59,90.0,100.59,0.0,0.0);  
1347     AliMatrix(idrotm[515],90.0,349.41,90.0,79.41,0.0,0.0);  
1348     AliMatrix(idrotm[516],90.0,338.82,90.0,68.82,0.0,0.0);  
1349     AliMatrix(idrotm[517],90.0,328.24,90.0,58.24,0.0,0.0);  
1350     AliMatrix(idrotm[518],90.0,317.65,90.0,47.65,0.0,0.0);
1351     AliMatrix(idrotm[519],90.0,307.06,90.0,37.06,0.0,0.0);
1352     AliMatrix(idrotm[520],90.0,296.47,90.0,26.47,0.0,0.0);  
1353     AliMatrix(idrotm[521],90.0,285.88,90.0,15.88,0.0,0.0);
1354     AliMatrix(idrotm[522],90.0,275.29,90.0,5.29,0.0,0.0);
1355     AliMatrix(idrotm[523],90.0,264.71,90.0,354.71,0.0,0.0); 
1356     AliMatrix(idrotm[524],90.0,254.12,90.0,344.12,0.0,0.0);  
1357     AliMatrix(idrotm[525],90.0,243.53,90.0,333.53,0.0,0.0);  
1358     AliMatrix(idrotm[526],90.0,232.94,90.0,322.94,0.0,0.0);  
1359     AliMatrix(idrotm[527],90.0,222.35,90.0,312.35,0.0,0.0);  
1360     AliMatrix(idrotm[528],90.0,211.76,90.0,301.76,0.0,0.0);
1361     AliMatrix(idrotm[529],90.0,190.59,90.0,280.59,0.0,0.0);
1362     AliMatrix(idrotm[530],90.0,169.41,90.0,259.41,0.0,0.0);  
1363     AliMatrix(idrotm[531],90.0,158.82,90.0,248.82,0.0,0.0);
1364     AliMatrix(idrotm[532],90.0,360.0,90.0,90.0,0.0,0.0);
1365     AliMatrix(idrotm[533],90.0,180.0,90.0,270.0,0.0,0.0); 
1366     AliMatrix(idrotm[534],90.0,189.47,90.0,279.47,0.0,0.0);  
1367     AliMatrix(idrotm[535],90.0,198.95,90.0,288.95,0.0,0.0);  
1368     AliMatrix(idrotm[537],90.0,217.89,90.0,307.89,0.0,0.0);  
1369     AliMatrix(idrotm[538],90.0,227.37,90.0,317.37,0.0,0.0);
1370     AliMatrix(idrotm[539],90.0,236.84,90.0,326.84,0.0,0.0);
1371     AliMatrix(idrotm[540],90.0,246.32,90.0,336.32,0.0,0.0);  
1372     AliMatrix(idrotm[541],90.0,255.79,90.0,345.79,0.0,0.0);
1373     AliMatrix(idrotm[542],90.0,265.26,90.0,355.26,0.0,0.0);
1374     AliMatrix(idrotm[543],90.0,274.74,90.0,4.74,0.0,0.0); 
1375     AliMatrix(idrotm[544],90.0,284.21,90.0,14.21,0.0,0.0);  
1376     AliMatrix(idrotm[545],90.0,293.68,90.0,23.68,0.0,0.0);  
1377     AliMatrix(idrotm[546],90.0,303.16,90.0,33.16,0.0,0.0);  
1378     AliMatrix(idrotm[547],90.0,312.63,90.0,42.63,0.0,0.0);  
1379     AliMatrix(idrotm[548],90.0,322.11,90.0,52.11,0.0,0.0);
1380     AliMatrix(idrotm[549],90.0,331.58,90.0,61.58,0.0,0.0);
1381     AliMatrix(idrotm[550],90.0,341.05,90.0,71.05,0.0,0.0);  
1382     AliMatrix(idrotm[551],90.0,350.53,90.0,80.53,0.0,0.0);
1383     AliMatrix(idrotm[552],90.0,9.47,90.0,99.47,0.0,0.0);
1384     AliMatrix(idrotm[553],90.0,18.95,90.0,108.95,0.0,0.0); 
1385     AliMatrix(idrotm[555],90.0,37.89,90.0,127.89,0.0,0.0);  
1386     AliMatrix(idrotm[556],90.0,47.37,90.0,137.37,0.0,0.0);  
1387     AliMatrix(idrotm[557],90.0,56.84,90.0,146.84,0.0,0.0);  
1388     AliMatrix(idrotm[558],90.0,66.32,90.0,156.32,0.0,0.0);
1389     AliMatrix(idrotm[559],90.0,75.79,90.0,165.79,0.0,0.0);
1390     AliMatrix(idrotm[560],90.0,85.26,90.0,175.26,0.0,0.0);  
1391     AliMatrix(idrotm[561],90.0,94.74,90.0,184.74,0.0,0.0);
1392     AliMatrix(idrotm[562],90.0,104.21,90.0,194.21,0.0,0.0);
1393     AliMatrix(idrotm[563],90.0,113.68,90.0,203.68,0.0,0.0); 
1394     AliMatrix(idrotm[564],90.0,123.16,90.0,213.16,0.0,0.0);  
1395     AliMatrix(idrotm[565],90.0,132.63,90.0,222.63,0.0,0.0);  
1396     AliMatrix(idrotm[566],90.0,142.11,90.0,232.11,0.0,0.0);  
1397     AliMatrix(idrotm[567],90.0,151.58,90.0,241.58,0.0,0.0);  
1398     AliMatrix(idrotm[568],90.0,161.05,90.0,251.05,0.0,0.0);
1399     AliMatrix(idrotm[569],90.0,170.53,90.0,260.53,0.0,0.0);
1400     AliMatrix(idrotm[570],90.0,180.0,90.0,90.0,180.0,0.0);  
1401     AliMatrix(idrotm[571],90.0,0.0,0.0,0.0,90.0,270.0);
1402     AliMatrix(idrotm[572],90.0,180.0,0.0,0.0,90.0,270.0);
1403     AliMatrix(idrotm[573],90.0,180.0,90.0,90.0,0.0,0.0); 
1404     AliMatrix(idrotm[575],90.0,120.0,180.0,0.0,90.0,210.0);  
1405     AliMatrix(idrotm[576],65.71,300.0,90.0,30.0,24.29,120.0);  
1406     AliMatrix(idrotm[577],114.29,300.0,90.0,30.0,155.71,120.0);  
1407     AliMatrix(idrotm[579],65.71,240.0,90.0,150.0,24.29,60.0);
1408     AliMatrix(idrotm[580],114.29,240.0,90.0,150.0,155.71,60.0);  
1409     AliMatrix(idrotm[581],90.0,240.0,180.0,0.0,90.0,330.0);
1410     AliMatrix(idrotm[583],90.0,0.0,180.0,0.0,90.0,90.0); 
1411     AliMatrix(idrotm[584],90.0,180.0,180.0,0.0,90.0,90.0);  
1412     AliMatrix(idrotm[586],180.0,0.0,90.0,90.0,90.0,0.0);  
1413     AliMatrix(idrotm[618],90.0,201.18,90.0,291.18,0.0,0.0);
1414     AliMatrix(idrotm[620],90.0,28.42,90.0,118.42,0.0,0.0);  
1415     AliMatrix(idrotm[623],90.0,208.42,90.0,298.42,0.0,0.0);
1416     AliMatrix(idrotm[633],132.46,0.0,90.0,90.0,42.46,360.0);
1417     AliMatrix(idrotm[653],90.0,21.18,90.0,111.18,0.0,0.0);
1418     }
1419
1420     // SDD cone
1421     if (! AliITSInitGeometry::SDDconeIsTGeoNative()) {
1422     AliMatrix(idrotm[846],90.0,300.0,90.0,30.0,0.0,0.0);
1423     AliMatrix(idrotm[851],90.0,305.0,90.0,35.0,0.0,0.0);
1424     AliMatrix(idrotm[853],90.0,60.0,90.0,150.0,0.0,0.0);
1425     AliMatrix(idrotm[856],90.0,0.0,90.0,90.0,180.0,0.0);
1426     AliMatrix(idrotm[857],90.0,5.0,90.0,95.0,180.0,0.0);
1427     AliMatrix(idrotm[858],90.0,65.0,90.0,155.0,180.0,0.0);
1428     AliMatrix(idrotm[859],90.0,305.0,90.0,35.0,180.0,0.0);
1429     AliMatrix(idrotm[860],90.0,245.0,90.0,335.0,180.0,0.0);
1430     AliMatrix(idrotm[861],90.0,185.0,90.0,275.0,180.0,0.0);
1431     AliMatrix(idrotm[862],90.0,125.0,90.0,215.0,180.0,0.0);
1432     AliMatrix(idrotm[863],90.0,257.5,90.0,347.5,180.0,0.0);
1433     AliMatrix(idrotm[864],90.0,227.5,90.0,317.5,180.0,0.0);
1434     AliMatrix(idrotm[865],90.0,197.5,90.0,287.5,180.0,0.0);
1435     AliMatrix(idrotm[867],90.0,167.5,90.0,257.5,180.0,0.0);
1436     AliMatrix(idrotm[868],90.0,287.5,90.0,17.5,0.0,0.0);  
1437     AliMatrix(idrotm[869],90.0,137.5,90.0,227.5,180.0,0.0);
1438     AliMatrix(idrotm[870],90.0,107.5,90.0,197.5,180.0,0.0);
1439     AliMatrix(idrotm[871],90.0,77.5,90.0,167.5,180.0,0.0);
1440     AliMatrix(idrotm[872],90.0,47.5,90.0,137.5,180.0,0.0);
1441     AliMatrix(idrotm[873],90.0,17.5,90.0,107.5,180.0,0.0);
1442     AliMatrix(idrotm[874],90.0,347.5,90.0,77.5,180.0,0.0);
1443     AliMatrix(idrotm[875],90.0,317.5,90.0,47.5,180.0,0.0);
1444     AliMatrix(idrotm[876],90.0,287.5,90.0,17.5,180.0,0.0);
1445     AliMatrix(idrotm[877],90.0,185.0,90.0,275.0,0.0,0.0);
1446     AliMatrix(idrotm[878],90.0,180.0,90.0,270.0,0.0,0.0);  
1447     AliMatrix(idrotm[879],90.0,125.0,90.0,215.0,0.0,0.0);
1448     AliMatrix(idrotm[880],90.0,65.0,90.0,155.0,0.0,0.0);
1449     AliMatrix(idrotm[881],90.0,5.0,90.0,95.0,0.0,0.0);
1450     AliMatrix(idrotm[882],90.0,245.0,90.0,335.0,0.0,0.0);
1451     AliMatrix(idrotm[883],90.0,47.5,90.0,137.5,0.0,0.0);
1452     AliMatrix(idrotm[884],90.0,77.5,90.0,167.5,0.0,0.0);
1453     AliMatrix(idrotm[885],90.0,107.5,90.0,197.5,0.0,0.0);
1454     AliMatrix(idrotm[887],90.0,137.5,90.0,227.5,0.0,0.0);
1455     AliMatrix(idrotm[888],90.0,167.5,90.0,257.5,0.0,0.0);
1456     AliMatrix(idrotm[889],90.0,197.5,90.0,287.5,0.0,0.0);
1457     AliMatrix(idrotm[890],90.0,227.5,90.0,317.5,0.0,0.0);
1458     AliMatrix(idrotm[891],90.0,347.5,90.0,77.5,0.0,0.0);
1459     AliMatrix(idrotm[892],90.0,317.5,90.0,47.5,0.0,0.0);
1460     AliMatrix(idrotm[893],90.0,257.5,90.0,347.5,0.0,0.0);
1461     AliMatrix(idrotm[894],90.0,270.0,0.0,0.0,90.0,180.0);
1462     AliMatrix(idrotm[895],90.0,286.36,0.0,0.0,90.0,196.36);
1463     AliMatrix(idrotm[896],90.0,302.73,0.0,0.0,90.0,212.73);
1464     AliMatrix(idrotm[897],90.0,319.09,0.0,0.0,90.0,229.09);
1465     AliMatrix(idrotm[898],90.0,17.5,90.0,107.5,0.0,0.0);
1466     AliMatrix(idrotm[899],90.0,335.45,0.0,0.0,90.0,245.45);
1467     AliMatrix(idrotm[900],90.0,351.82,0.0,0.0,90.0,261.82);
1468     AliMatrix(idrotm[901],90.0,8.18,0.0,0.0,90.0,278.18);
1469     AliMatrix(idrotm[902],90.0,24.55,0.0,0.0,90.0,294.55);
1470     AliMatrix(idrotm[903],90.0,40.91,0.0,0.0,90.0,310.91);
1471     AliMatrix(idrotm[904],90.0,57.27,0.0,0.0,90.0,327.27);
1472     AliMatrix(idrotm[905],90.0,73.64,0.0,0.0,90.0,343.64);
1473     AliMatrix(idrotm[906],90.0,90.0,0.0,0.0,90.0,360.0);
1474     AliMatrix(idrotm[907],90.0,106.36,0.0,0.0,90.0,16.36);
1475     AliMatrix(idrotm[908],90.0,122.73,0.0,0.0,90.0,32.73);
1476     AliMatrix(idrotm[909],90.0,139.09,0.0,0.0,90.0,49.09);
1477     AliMatrix(idrotm[910],90.0,155.45,0.0,0.0,90.0,65.45);
1478     AliMatrix(idrotm[911],90.0,171.82,0.0,0.0,90.0,81.82);
1479     AliMatrix(idrotm[912],90.0,188.18,0.0,0.0,90.0,98.18);
1480     AliMatrix(idrotm[913],90.0,204.55,0.0,0.0,90.0,114.55);
1481     AliMatrix(idrotm[914],90.0,220.91,0.0,0.0,90.0,130.91);
1482     AliMatrix(idrotm[915],90.0,237.27,0.0,0.0,90.0,147.27);
1483     AliMatrix(idrotm[916],90.0,253.64,0.0,0.0,90.0,163.64);
1484     AliMatrix(idrotm[917],90.0,295.71,0.0,0.0,90.0,205.71);
1485     AliMatrix(idrotm[918],90.0,321.43,0.0,0.0,90.0,231.43);
1486     AliMatrix(idrotm[919],90.0,347.14,0.0,0.0,90.0,257.14);
1487     AliMatrix(idrotm[920],90.0,12.86,0.0,0.0,90.0,282.86);
1488     AliMatrix(idrotm[921],90.0,38.57,0.0,0.0,90.0,308.57);
1489     AliMatrix(idrotm[922],90.0,64.29,0.0,0.0,90.0,334.29);
1490     AliMatrix(idrotm[923],90.0,115.71,0.0,0.0,90.0,25.71);
1491     AliMatrix(idrotm[924],90.0,141.43,0.0,0.0,90.0,51.43);
1492     AliMatrix(idrotm[925],90.0,167.14,0.0,0.0,90.0,77.14);
1493     AliMatrix(idrotm[926],90.0,192.86,0.0,0.0,90.0,102.86);
1494     AliMatrix(idrotm[927],90.0,218.57,0.0,0.0,90.0,128.57);
1495     AliMatrix(idrotm[928],90.0,244.29,0.0,0.0,90.0,154.29);
1496     AliMatrix(idrotm[929],90.0,120.0,90.0,210.0,0.0,0.0);
1497     AliMatrix(idrotm[930],90.0,240.0,90.0,330.0,0.0,0.0);
1498     AliMatrix(idrotm[931],90.0,60.0,90.0,150.0,180.0,0.0);
1499     AliMatrix(idrotm[932],90.0,120.0,90.0,210.0,180.0,0.0);
1500     AliMatrix(idrotm[933],90.0,180.0,90.0,270.0,180.0,0.0);
1501     AliMatrix(idrotm[934],90.0,240.0,90.0,330.0,180.0,0.0);
1502     AliMatrix(idrotm[935],90.0,300.0,90.0,30.0,180.0,0.0);
1503     }
1504
1505     // SSD cone
1506     if (! AliITSInitGeometry::SSDconeIsTGeoNative()) {
1507     AliMatrix(idrotm[701],90.0,0.0,90.0,90.0,180.0,0.0);
1508     AliMatrix(idrotm[702],90.0,347.5,90.0,77.5,180.0,0.0);
1509     AliMatrix(idrotm[703],90.0,17.5,90.0,107.5,180.0,0.0);
1510     AliMatrix(idrotm[704],90.0,47.5,90.0,137.5,180.0,0.0);
1511     AliMatrix(idrotm[705],90.0,77.5,90.0,167.5,180.0,0.0);
1512     AliMatrix(idrotm[706],90.0,107.5,90.0,197.5,180.0,0.0);
1513     AliMatrix(idrotm[707],90.0,137.5,90.0,227.5,180.0,0.0);
1514     AliMatrix(idrotm[708],90.0,167.5,90.0,257.5,180.0,0.0);
1515     AliMatrix(idrotm[709],90.0,197.5,90.0,287.5,180.0,0.0);
1516     AliMatrix(idrotm[710],90.0,227.5,90.0,317.5,180.0,0.0);
1517     AliMatrix(idrotm[711],90.0,257.5,90.0,347.5,180.0,0.0);
1518     AliMatrix(idrotm[712],90.0,287.5,90.0,17.5,180.0,0.0);
1519     AliMatrix(idrotm[713],90.0,317.5,90.0,47.5,180.0,0.0);
1520     AliMatrix(idrotm[714],90.0,328.4,90.0,58.4,180.0,0.0);
1521     AliMatrix(idrotm[715],90.0,28.4,90.0,118.4,180.0,0.0);
1522     AliMatrix(idrotm[716],90.0,88.4,90.0,178.4,180.0,0.0);
1523     AliMatrix(idrotm[717],90.0,148.4,90.0,238.4,180.0,0.0);
1524     AliMatrix(idrotm[718],90.0,208.4,90.0,298.4,180.0,0.0);
1525     AliMatrix(idrotm[719],90.0,268.4,90.0,358.4,180.0,0.0);
1526     AliMatrix(idrotm[720],90.0,28.4,90.0,118.4,0.0,0.0);
1527     AliMatrix(idrotm[721],90.0,88.4,90.0,178.4,0.0,0.0);
1528     AliMatrix(idrotm[722],90.0,148.4,90.0,238.4,0.0,0.0);
1529     AliMatrix(idrotm[723],90.0,208.4,90.0,298.4,0.0,0.0);
1530     AliMatrix(idrotm[724],90.0,268.4,90.0,358.4,0.0,0.0);
1531     AliMatrix(idrotm[725],90.0,328.4,90.0,58.4,0.0,0.0);
1532     AliMatrix(idrotm[726],90.0,77.5,90.0,167.5,0.0,0.0);
1533     AliMatrix(idrotm[727],90.0,107.5,90.0,197.5,0.0,0.0);
1534     AliMatrix(idrotm[728],90.0,137.5,90.0,227.5,0.0,0.0);
1535     AliMatrix(idrotm[729],90.0,167.5,90.0,257.5,0.0,0.0);
1536     AliMatrix(idrotm[730],90.0,227.5,90.0,317.5,0.0,0.0);
1537     AliMatrix(idrotm[731],90.0,257.5,90.0,347.5,0.0,0.0);
1538     AliMatrix(idrotm[732],90.0,317.5,90.0,47.5,0.0,0.0);  
1539     AliMatrix(idrotm[733],90.0,197.5,90.0,287.5,0.0,0.0);
1540     AliMatrix(idrotm[734],90.0,347.5,90.0,77.5,0.0,0.0);
1541     AliMatrix(idrotm[735],90.0,47.5,90.0,137.5,0.0,0.0);
1542     AliMatrix(idrotm[768],90.0,287.5,90.0,17.5,0.0,0.0);
1543     AliMatrix(idrotm[798],90.0,17.5,90.0,107.5,0.0,0.0);
1544     }
1545
1546     // Services
1547     AliMatrix(idrotm[200], 90., 0., 90., 90., 180., 0.);
1548
1549     // New reference frame: z--->  -z;   x ---> -x;   y ---> y
1550     AliMatrix(idrotm[199], 90.,180., 90.,90., 180.,0.);
1551
1552     //     CONVERT INTO CM (RL(SI)=9.36 CM)
1553     for (i = 0; i < 6; ++i) {
1554         drl[i] = drl[i] / 100. * 9.36;
1555     } // end for i
1556
1557     //     FIELD CAGE HALF LENGTH
1558     rlim  = 50.;
1559     zmax  = 74.;
1560     ztpc = 284.;
1561     // --- Define ghost volume containing the whole ITS (including services) 
1562     //     and fill it with air
1563     dgh[0] = 0.;
1564     dgh[1] = 360.;
1565     dgh[2] = 16.;
1566     dgh[3] = -ztpc-5.-0.1;
1567     dgh[4] = 46;   
1568     dgh[5] = 85.;
1569     dgh[6] = -ztpc;
1570     dgh[7] = 46;   
1571     dgh[8] = 85.;
1572     dgh[9] = -ztpc;
1573     dgh[10] = 46;  
1574     dgh[11] = rlim+7.5;
1575     dgh[12] = -97.5;
1576     dgh[13] = 46;  
1577     dgh[14] = rlim+7.5;
1578     dgh[15] = -zmax;
1579     dgh[16] = 46;  
1580     dgh[17] = rlim+7.5;
1581     dgh[18] = -48;   
1582     dgh[19] = 6;
1583     dgh[20] = rlim+7.5;
1584     dgh[21] = -28.6;   
1585     dgh[22] = 6;
1586     dgh[23] = rlim+7.5;    
1587     dgh[24] = -27.6;  
1588     dgh[25] = 3.295;
1589     dgh[26] = rlim+7.5; 
1590     dgh[27] = 27.6;   
1591     dgh[28] = 3.295;
1592     dgh[29] = rlim+7.5;
1593     dgh[30] = 28.6;   
1594     dgh[31] = 6;
1595     dgh[32] = rlim+7.5;
1596     dgh[33] = 48;   
1597     dgh[34] = 6;
1598     dgh[35] = rlim+7.5;  
1599     dgh[36] = zmax;
1600     dgh[37] = 46;
1601     dgh[38] = rlim+7.5;
1602     dgh[39] = 97.5;
1603     dgh[40] = 46;  
1604     dgh[41] = rlim+7.5;
1605     dgh[42] = ztpc;
1606     dgh[43] = 62;     
1607     dgh[44] = 62+4.;  
1608     dgh[45] = ztpc;
1609     dgh[46] = 62;     
1610     dgh[47] = 85.;
1611     dgh[48] = ztpc+4.+0.1;
1612     dgh[49] = 62.0;//62.4;
1613     dgh[50] = 85.;
1614     gMC->Gsvolu("ITSV", "PCON", idtmed[205], dgh, 51);
1615
1616     // --- Place the ghost volume in its mother volume (ALIC) and make it 
1617     //     invisible
1618     //    gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY");
1619     //gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., idrotm[199], "MANY");
1620     //gMC->Gsatt("ITSV", "SEEN", 0);
1621
1622     //gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "MANY"); //=== LG
1623     gMC->Gspos("ITSV", 1, "ALIC", 0., 0., 0., 0, "ONLY"); //=== LG
1624
1625
1626     // --- Define ghost volume containing the six layers and fill it with air 
1627   
1628 //     dgh[0] = 0.;
1629 //     dgh[1] = 360.;
1630 //     dgh[2] = 8.;
1631 //     dgh[3] = -zmax;  
1632 //     dgh[4] = 46.;
1633 //     dgh[5] = rlim;
1634 //     dgh[6] = -47.5;    
1635 //     dgh[7] = 6.005;
1636 //     dgh[8] = rlim;
1637 //     dgh[9] = -28.5;    
1638 //     dgh[10] = 6.005;
1639 //     dgh[11] = rlim;  
1640 //     dgh[12] = -27.5;   
1641 //     dgh[13] = 3.3;
1642 //     dgh[14] = rlim;
1643 //     dgh[15] = 27.5;    
1644 //     dgh[16] = 3.3;
1645 //     dgh[17] = rlim;
1646 //     dgh[18] = 28.5;    
1647 //     dgh[19] = 6.005;
1648 //     dgh[20] = rlim;
1649 //     dgh[21] = 47.5;    
1650 //     dgh[22] = 6.005;
1651 //     dgh[23] = rlim;
1652 //     dgh[24] = zmax;    
1653 //     dgh[25] = 46.;
1654 //     dgh[26] = rlim;
1655 //     gMC->Gsvolu("ITSD", "PCON", idtmed[205], dgh, 27);
1656
1657     // --- Place the ghost volume in its mother volume (ITSV) and make it 
1658     //     invisible
1659     //gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., 0, "ONLY");
1660     //gMC->Gsatt("ITSD", "SEEN", 0);
1661
1662     //======================================================================
1663     // Let's make ITSD an assembly, because we can then add the new geometry
1664     // inside this volume without belonging to it.
1665     //
1666     // The 180° rotation (which was done for switching from the old
1667     // coordinate system to the new one) is applied on ITSD, not ITSV,
1668     // because ITSV will also contain the new geometry.
1669     // LG
1670     //======================================================================
1671
1672     //TGeoVolumeAssembly *dITS = new TGeoVolumeAssembly("ITSD");
1673     new TGeoVolumeAssembly("ITSD");
1674     gMC->Gspos("ITSD", 1, "ITSV", 0., 0., 0., idrotm[199], "ONLY");
1675
1676
1677   // --- Define SPD (option 'b') volumes ----------------------------
1678   
1679   // SPD - option 'b' 
1680   // (this is the default)
1681
1682   //if (option == 2) {
1683   if (! AliITSInitGeometry::SPDIsTGeoNative()) {
1684   
1685      dits[0] = 3.7;
1686      dits[1] = 7.75;
1687      dits[2] = 26.1;
1688      gMC->Gsvolu("IT12", "TUBE", idtmed[254], dits, 3);   
1689
1690      dits[0] = 3.7;
1691      dits[1] = 7.7;
1692      dits[2] = 24;
1693      dits[3] = 57;
1694      dits[4] = 100;
1695      gMC->Gsvolu("I12B", "TUBS", idtmed[254], dits, 5);   // sector
1696
1697      di10b[0] = 0.843;
1698      di10b[1] = ddet1+dchip1+dbus+0.0025;  
1699      di10b[2] = 19.344;
1700      gMC->Gsvolu("I10B", "BOX ", idtmed[254], di10b, 3);   // mother volume 
1701                                                                 // on layer 1
1702
1703      di20b[0] = 0.843;
1704      di20b[1] = ddet2+dchip2+dbus+0.0025;   
1705      di20b[2] = 19.344;
1706      gMC->Gsvolu("I20B", "BOX ", idtmed[254], di20b, 3);   // mother volume
1707                                                                 // layer 2
1708
1709      dits[0] = 1.3673;
1710      dits[1] = 0.01;
1711      dits[2] = 24;
1712      gMC->Gsvolu("I123", "BOX ", idtmed[253], dits, 3);
1713
1714      dits[0] = 0.06;
1715      dits[1] = 0.08;
1716      dits[2] = 24;
1717      dits[3] = -36.79;
1718      dits[4] = 21.834;
1719      gMC->Gsvolu("I121", "TUBS", idtmed[253], dits, 5);  
1720
1721      dits[0] = 0.1253;
1722      dits[1] = 0.01;
1723      dits[2] = 24;
1724      gMC->Gsvolu("I122", "BOX ", idtmed[253], dits, 3);  
1725
1726      dits[0] = 0.04;
1727      dits[1] = 0.06 ;
1728      dits[2] = 24;
1729      dits[3] = 126.79;
1730      dits[4] = 270;
1731      gMC->Gsvolu("I120", "TUBS", idtmed[253], dits, 5);  
1732
1733      dits[0] = 0.1134;
1734      dits[1] = 0.01;
1735      dits[2] = 24;
1736      gMC->Gsvolu("I144", "BOX ", idtmed[253], dits, 3);  
1737
1738      dits[0] = 0.25;
1739      dits[1] = 0.06;
1740      dits[2] = 24;
1741      gMC->Gsvolu("I113", "BOX ", idtmed[254], dits, 3);  
1742
1743      dits[0] = 0.077;
1744      dits[1] = 0.01;
1745      dits[2] = 24;
1746      gMC->Gsvolu("I143", "BOX ", idtmed[253], dits, 3);   
1747
1748      dits[0] = 0.04;
1749      dits[1] = 0.06;
1750      dits[2] = 24;
1751      dits[3] = 0;
1752      dits[4] = 90;
1753      gMC->Gsvolu("I142", "TUBS", idtmed[253], dits, 5); 
1754
1755      dits[0] = 0.0695;
1756      dits[1] = 0.01;
1757      dits[2] = 24;
1758      gMC->Gsvolu("I141", "BOX ", idtmed[253], dits, 3);  
1759
1760      dits[0] = 0.06;
1761      dits[1] = 0.08;
1762      dits[2] = 24;
1763      dits[3] = 0;
1764      dits[4] = 108;
1765      gMC->Gsvolu("I140", "TUBS", idtmed[253], dits, 5);  
1766
1767      dits[0] = 0.1835;
1768      dits[1] = 0.01;
1769      dits[2] = 24;
1770      gMC->Gsvolu("I139", "BOX ", idtmed[253], dits, 3);
1771
1772      dits[0] = 0.1894 ;
1773      dits[1] = 0.01;
1774      dits[2] = 24;
1775      gMC->Gsvolu("I138", "BOX ", idtmed[253], dits, 3);  
1776
1777      dits[0] = 0.04;
1778      dits[1] = 0.06;
1779      dits[2] = 24;
1780      dits[3] = 0;
1781      dits[4] = 75.261;
1782      gMC->Gsvolu("I137", "TUBS", idtmed[253], dits, 5);  
1783
1784      dits[0] = 1.3401;
1785      dits[1] = 0.01;
1786      dits[2] = 24;
1787      gMC->Gsvolu("I136", "BOX ", idtmed[253], dits, 3);  
1788
1789      dits[0] = 0.05;
1790      dits[1] = 0.07;
1791      dits[2] = 24;
1792      dits[3] = 0;
1793      dits[4] = 72.739;
1794      gMC->Gsvolu("I135", "TUBS", idtmed[253], dits, 5);  
1795
1796      dits[0] = 0.1193;
1797      dits[1] = 0.01;
1798      dits[2] = 24;
1799      gMC->Gsvolu("I134", "BOX ", idtmed[253], dits, 3);    
1800
1801      dits[0] = 0.163;
1802      dits[1] = 0.01;
1803      dits[2] = 24;
1804      gMC->Gsvolu("I133", "BOX ", idtmed[253], dits, 3);   
1805
1806      dits[0] = 0.04;
1807      dits[1] = 0.06;
1808      dits[2] = 24;
1809      dits[3] = 0;
1810      dits[4] = 157.633;
1811      gMC->Gsvolu("I132", "TUBS", idtmed[253], dits, 5); 
1812
1813      dits[0] = 0.2497;
1814      dits[1] = 0.01;
1815      dits[2] = 24;
1816      gMC->Gsvolu("I131", "BOX ", idtmed[253], dits, 3); 
1817
1818      dits[0] = 0.06;
1819      dits[1] = 0.08;
1820      dits[2] = 24;
1821      dits[3] = 0;
1822      dits[4] = 148.633;
1823      gMC->Gsvolu("I130", "TUBS", idtmed[253], dits, 5); 
1824
1825      dits[0] = 0.292;
1826      dits[1] = 0.01;
1827      dits[2] = 24;
1828      gMC->Gsvolu("I129", "BOX ", idtmed[253], dits, 3);  
1829
1830      dits[0] = 0.163;
1831      dits[1] = 0.01;
1832      dits[2] = 24;
1833      gMC->Gsvolu("I128", "BOX ", idtmed[253], dits, 3);  
1834
1835      dits[0] = 0.04;
1836      dits[1] = 0.06;
1837      dits[2] = 24;
1838      dits[3] = 0;
1839      dits[4] = 161.297;
1840      gMC->Gsvolu("I126", "TUBS", idtmed[253], dits, 5);
1841
1842      dits[0] = 0.2433;
1843      dits[1] = 0.01;
1844      dits[2] = 24;
1845      gMC->Gsvolu("I125", "BOX ", idtmed[253], dits, 3);  
1846
1847      dits[0] = 0.06;
1848      dits[1] = 0.08;
1849      dits[2] = 24;
1850      dits[3] = 0;
1851      dits[4] = 42.883;
1852      gMC->Gsvolu("I124", "TUBS", idtmed[253], dits, 5);  
1853
1854      dits[0] = 0.793;
1855      dits[1] = ddet1+dchip1+dbus+0.0025; 
1856      dits[2] = 2.5;
1857      gMC->Gsvolu("I105", "BOX ", idtmed[290], dits, 3);  
1858
1859      di107[0] = 0.793;
1860      di107[1] = ddet1+dchip1;
1861      di107[2] = 3.536;
1862      gMC->Gsvolu("I107", "BOX ", idtmed[254], di107, 3); // contains det and chip   
1863                                                          // layer 1
1864      dits[0] = 0.705;
1865      dits[1] = 0.01;
1866      dits[2] = 2.5;
1867      gMC->Gsvolu("I109", "BOX ", idtmed[275], dits, 3);  
1868
1869      di108[0] = 0.705;
1870      di108[1] = dbus;
1871      di108[2] = 14.344;
1872      gMC->Gsvolu("I108", "BOX ", idtmed[275], di108, 3); // bus for both layers 
1873
1874      di1d7[0] = 0.7975;
1875      di1d7[1] = ddet2+dchip2;   
1876      di1d7[2] = 3.536;
1877      gMC->Gsvolu("I1D7", "BOX ", idtmed[254], di1d7, 3); // contains det and chip
1878                                                          // layer 2
1879      dits[0] = 0.06;
1880      dits[1] = 0.08;
1881      dits[2] = 24;
1882      dits[3] = 0;
1883      dits[4] = 80;
1884      gMC->Gsvolu("I112", "TUBS", idtmed[253], dits, 5);  
1885
1886      dits[0] = 0.04;
1887      dits[1] = 0.06;
1888      dits[2] = 24;
1889      dits[3] = 0;
1890      dits[4] = 80;
1891      gMC->Gsvolu("I111", "TUBS", idtmed[253], dits, 5);  
1892
1893      dits[0] = 0.15;
1894      dits[1] = 0.0146;
1895      dits[2] = 24;
1896      gMC->Gsvolu("I118", "BOX ", idtmed[273], dits, 3);  
1897
1898      dits[0] = 0.1315;
1899      dits[1] = 0.01;
1900      dits[2] = 24;
1901      gMC->Gsvolu("I110", "BOX ", idtmed[253], dits, 3);  
1902
1903      dits[0] = 0.025;
1904      dits[1] = 0.035;
1905      dits[2] = 24;
1906      dits[3] = 0;
1907      dits[4] = 180;
1908      gMC->Gsvolu("I114", "TUBS", idtmed[264], dits, 5);  
1909
1910      dits[0] = 0;
1911      dits[1] = 0.025;
1912      dits[2] = 24;
1913      dits[3] = 0;
1914      dits[4] = 180;
1915      gMC->Gsvolu("I115", "TUBS", idtmed[211], dits, 5);  // set freon as cooling fluid
1916      
1917      
1918      dits[0] = 0.063;
1919      dits[1] = 0.035;
1920      dits[2] = 24;
1921      gMC->Gsvolu("I116", "BOX ", idtmed[264], dits, 3); 
1922
1923      di106[0] = 0.7975;
1924      di106[1] = dchip1;   
1925      di106[2] = 0.68;
1926      gMC->Gsvolu("I106", "BOX ", idtmed[201], di106, 3);   // chip layer 1
1927
1928      di1d6[0] = 0.7975;
1929      di1d6[1] = dchip2;   
1930      di1d6[2] = 0.68;
1931      gMC->Gsvolu("I1D6", "BOX ", idtmed[201], di1d6, 3);   // chip layer 2
1932
1933      di101[0] = 0.705;
1934      di101[1] = ddet1;
1935      di101[2] = 3.536;
1936      gMC->Gsvolu("I101", "BOX ", idtmed[250], di101, 3);  // contains detector
1937                                                           // layer 1
1938      di1d1[0] = 0.705;
1939      di1d1[1] = ddet2;   
1940      di1d1[2] = 3.536;
1941      gMC->Gsvolu("I1D1", "BOX ", idtmed[250], di1d1, 3);  // contains detector
1942                                                           // layer 2
1943    
1944
1945      dits[0] = 0.063;
1946      dits[1] = 0.025;
1947      dits[2] = 24;
1948      gMC->Gsvolu("I117", "BOX ", idtmed[211], dits, 3); // set freon as cooling fluid
1949     
1950
1951      dits1[0] = 0.64;
1952      dits1[1] = ddet1;
1953      dits1[2] = 3.48;
1954      gMC->Gsvolu("ITS1", "BOX ", idtmed[200], dits1, 3);   // detector layer 1
1955
1956      dits2[0] = 0.64;
1957      dits2[1] = ddet2;  
1958      dits2[2] = 3.48;
1959      gMC->Gsvolu("ITS2", "BOX ", idtmed[200], dits2, 3);   // detector layer 2
1960
1961      dits[0] = 3.701;
1962      dits[1] = 7.699;
1963      dits[2] = 4;
1964      dits[3] = 57.1;
1965      dits[4] = 99.9;  
1966      gMC->Gsvolu("I650", "TUBS", idtmed[254], dits, 5);  // was I150 in old geom.
1967
1968      dits[0] = 3.7;
1969      dits[1] = 7.75;
1970      dits[2] = 0.05;
1971      gMC->Gsvolu("I651", "TUBE", idtmed[296], dits, 3);  // services disk
1972  
1973      dits[0] = 0;
1974      dits[1] = 0.5;
1975      dits[2] = 1.5;
1976      gMC->Gsvolu("I676", "TUBE", idtmed[274], dits, 3); // was I176 in old geom.
1977
1978      dits[0] = 0;
1979      dits[1] = 0.18;
1980      dits[2] = 0.8;
1981      gMC->Gsvolu("I673", "TUBE", idtmed[274], dits, 3); // was I173 in old geom.
1982
1983      dits[0] = 0;
1984      dits[1] = 0.18;
1985      dits[2] = 3;
1986      gMC->Gsvolu("I671", "TUBE", idtmed[274], dits, 3); // was I171 in old geom.
1987
1988      dits[0] = 0;
1989      dits[1] = 0.075;
1990      dits[2] = 0.8;
1991      gMC->Gsvolu("I669", "TUBE", idtmed[264], dits, 3); // was I169 in old geom.
1992
1993      dits[0] = 3.5;
1994      dits[1] = 5.6;
1995      dits[2] = 0.55;
1996      dits[3] = 0;
1997      dits[4] = 38;
1998      gMC->Gsvolu("I667", "TUBS", idtmed[263], dits, 5); // was I167 in old geom.
1999
2000      dits[0] = 6.6;
2001      dits[1] = 7.6;
2002      dits[2] = 0.5;
2003      dits[3] = 0;
2004      dits[4] = 9;
2005      gMC->Gsvolu("I666", "TUBS", idtmed[263], dits, 5); // was I166 in old geom.
2006
2007      dits[0] = 0.26;
2008      dits[1] = 0.32;
2009      dits[2] = 0.55;
2010      gMC->Gsvolu("I678", "TUBE", idtmed[263], dits, 3); // was I178 in old geom.
2011
2012      dits[0] = 0;
2013      dits[1] = 0.3;
2014      dits[2] = 1.5;
2015      gMC->Gsvolu("I677", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
2016      // was I177 in old geom.     
2017      
2018      dits[0] = 0.07;
2019      dits[1] = 0.125;
2020      dits[2] = 0.3;
2021      gMC->Gsvolu("I675", "TUBE", idtmed[263], dits, 3); // was I175 in old geom.
2022
2023
2024      dits[0] = 0;
2025      dits[1] = 0.1;
2026      dits[2] = 0.8;
2027      gMC->Gsvolu("I674", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
2028      // was I174 in old geom.     
2029      
2030      
2031
2032      dits[0] = 0;
2033      dits[1] = 0.1;
2034      dits[2] = 3;
2035      gMC->Gsvolu("I672", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
2036      // was I172 in old geom.     
2037      
2038
2039      dits[0] = 0;
2040      dits[1] = 0.0746;
2041      dits[2] = 0.8;
2042      gMC->Gsvolu("I670", "TUBE", idtmed[211], dits, 3); //set freon as cooling fluid
2043      // was I170 in old geom.     
2044
2045      dits[0] = 3.7;
2046      dits[1] = 5.4;
2047      dits[2] = 0.35;
2048      dits[3] = 2;
2049      dits[4] = 36;
2050      gMC->Gsvolu("I668", "TUBS", idtmed[211], dits, 5); //set freon as cooling fluid
2051      // was I168 in old geom.     
2052
2053   }
2054
2055   // --- Define SDD volumes ------------------------------------------
2056
2057   cos30 = cos(30.*3.14159/180.);
2058   sin30 = sin(30.*3.14159/180.);
2059
2060   if (! AliITSInitGeometry::SDDIsTGeoNative()) {
2061
2062   Double_t maxRadius = 28.5;  
2063   dits[0] = 0;
2064   dits[1] = 360;
2065   dits[2] = 6;
2066   dits[3] = -34.6; 
2067   dits[4] = 23.49;
2068   dits[5] = maxRadius;
2069   dits[6] = -27.35; 
2070   dits[7] = 23.49;
2071   dits[8] = maxRadius;
2072   dits[9] = -27.35;  
2073   dits[10] = 14.59; 
2074   dits[11] = maxRadius;
2075   dits[12] = 27.35;   
2076   dits[13] = 14.59;
2077   dits[14] = maxRadius;
2078   dits[15] = 27.35;    
2079   dits[16] = 23.49;
2080   dits[17] = maxRadius;
2081   dits[18] = 34.6;  
2082   dits[19] = 23.49;
2083   dits[20] = maxRadius;
2084   gMC->Gsvolu("IT34", "PCON", idtmed[209], dits, 21);  
2085
2086   // block of the SDD electronics and related ladder frame 
2087   iI018dits[0] = 3.2;
2088   iI018dits[1] = 2;
2089   iI018dits[2] = 3.65;
2090   gMC->Gsvolu("I018", "BOX ", idtmed[209], iI018dits, 3);  
2091
2092   // block of the SDD end ladder 
2093   iI024dits[0] = 3.2;
2094   iI024dits[1] = 2;
2095   iI024dits[2] = 2.725;
2096   gMC->Gsvolu("I024", "BOX ", idtmed[209], iI024dits, 3);  
2097
2098   // ladder frame of layer 3 - F.T. March,7-2001
2099   iI047dits[0] = iI018dits[0];
2100   iI047dits[1] = iI018dits[1];
2101   iI047dits[2] = 6*iI018dits[2] + 2*iI024dits[2]; 
2102   gMC->Gsvolu("I047", "BOX ", idtmed[209], iI047dits, 3);  
2103
2104   // ladder frame of layer 4 - F.T. March,7-2001
2105   iI048dits[0] = iI018dits[0];
2106   iI048dits[1] = iI018dits[1];
2107   iI048dits[2] = 8*iI018dits[2] + 2*iI024dits[2]; 
2108   gMC->Gsvolu("I048", "BOX ", idtmed[209], iI048dits, 3);  
2109
2110
2111   // global SDD volume (sensitive + insensitive) 
2112   iI302dits[0] = 3.6250;
2113   iI302dits[1] = 0.0150;
2114   iI302dits[2] = 4.3794;
2115   gMC->Gsvolu("I302", "BOX ", idtmed[278], iI302dits, 3);
2116
2117   // Like for I302 - F.T. March,7-2001
2118   iI402dits[0] = 3.6250;
2119   iI402dits[1] = 0.0150;
2120   iI402dits[2] = 4.3794;
2121   gMC->Gsvolu("I402", "BOX ", idtmed[278], iI402dits, 3);  
2122
2123   // SDD ladder of layer 3 - F.T. March,7-2001
2124   iI004dits[0] = iI302dits[0]+0.005;
2125   iI004dits[1] = 2*iI302dits[1]+ySDDsep/2.;
2126   iI004dits[2] = TMath::Abs(zSDDlay3[0]);
2127   if (iI004dits[2] < TMath::Abs(zSDDlay3[5])) {
2128     iI004dits[2] = TMath::Abs(zSDDlay3[5]);
2129   }
2130   iI004dits[2] = iI004dits[2] + iI302dits[2];
2131   gMC->Gsvolu("I004", "BOX ", idtmed[209], iI004dits, 3);  
2132
2133   // SDD ladder of layer 4 - F.T. March,7-2001
2134   iI005dits[0] = iI402dits[0]+0.005;
2135   iI005dits[1] = 2*iI402dits[1]+ySDDsep/2.;
2136   iI005dits[2] = TMath::Abs(zSDDlay4[0]);
2137   if (iI005dits[2] < TMath::Abs(zSDDlay4[7])) {
2138     iI005dits[2] = TMath::Abs(zSDDlay4[7]);
2139   }
2140   iI005dits[2] = iI005dits[2] + iI402dits[2];
2141   gMC->Gsvolu("I005", "BOX ", idtmed[209], iI005dits, 3);  
2142
2143
2144   // -- block of the SDD ladder foot and end ladder
2145
2146   // ladder foot mother volume
2147   iI028dits[0] = 3.0000;
2148   iI028dits[1] = 0.4000;
2149   iI028dits[2] = 0.9000;
2150   gMC->Gsvolu("I028", "BOX ", idtmed[224], iI028dits, 3);  
2151
2152   // positioning-box #1 at SDD end-ladder - F.T. March,7-2001
2153   iI420dits[0] = 0.4500;
2154   iI420dits[1] = 0.4000;
2155   iI420dits[2] = 0.4500;
2156   gMC->Gsvolu("I420", "BOX ", idtmed[264], iI420dits, 3);  
2157
2158   // positioning-box #2 at SDD end-ladder - F.T. March,7-2001
2159   iI421dits[0] = 0.;
2160   iI421dits[1] = 0.25;
2161   iI421dits[2] = iI420dits[1];
2162   gMC->Gsvolu("I421", "TUBE", idtmed[209], iI421dits, 3);  
2163
2164   // reference ruby-sphere at SDD end-ladder - F.T. March,7-2001 
2165   iI422dits[0] = 0.0000;
2166   iI422dits[1] = 0.2000;
2167   iI422dits[2] = 0.0000;
2168   iI422dits[3] = 180.00;
2169   iI422dits[4] = 0.0000;
2170   iI422dits[5] = 360.00;
2171   gMC->Gsvolu("I422", "SPHE", idtmed[277], iI422dits, 6);  
2172
2173   // support for ruby-sphere (I422) - F.T. March,7-2001
2174   iI423dits[0] = 0.0000;
2175   iI423dits[1] = 0.1000;
2176   iI423dits[2] = (iI420dits[1]-iI422dits[1])/2.;
2177   gMC->Gsvolu("I423", "TUBE", idtmed[264], iI423dits, 3);  
2178
2179   // passage for HV microcables - F.T. March,7-2001
2180   iI424dits[0] = 1.5000;
2181   iI424dits[1] = 0.1500;
2182   iI424dits[2] = iI421dits[2];
2183   gMC->Gsvolu("I424", "BOX ", idtmed[209], iI424dits, 3);  
2184
2185   // HV microcables segment at the end ladder - F.T. March,7-2001
2186   iI425dits[0] = 1.350000;
2187   iI425dits[1] = 0.015250;
2188   iI425dits[2] = iI024dits[2];
2189   gMC->Gsvolu("I425", "BOX ", idtmed[279], iI425dits, 3);  
2190
2191   // lower edge of SDD ladder frame at end-ladder - part 1
2192   dits[0] = 0.2;
2193   dits[1] = 0.1815;
2194   dits[2] = iI024dits[2];
2195   dits[3] = 0.015;
2196   gMC->Gsvolu("I025", "TRD1", idtmed[208], dits, 4);  
2197
2198   // lower edge of SDD ladder frame at end-ladder - part 2
2199   dits[0] = 0.183;
2200   dits[1] = 0.165;
2201   dits[2] = iI024dits[2];
2202   dits[3] = 0.015;
2203   gMC->Gsvolu("I026", "TRD1", idtmed[208], dits, 4);  
2204
2205   // new: for the 1st top rod of the structure 
2206   // at the end-ladder - F.T. March,7-2001
2207   iI029dits[0] = 0.2;
2208   iI029dits[1] = 0.1815;
2209   iI029dits[2] = 1.0100;
2210   iI029dits[3] = 0.015;
2211   gMC->Gsvolu("I029", "TRD1", idtmed[208], iI029dits, 4);  
2212
2213   // new: for the 2nd top rod of the structure 
2214   // at the end-ladder - F.T. March,7-2001
2215   iI030dits[0] = 0.1830;
2216   iI030dits[1] = 0.1650;
2217   iI030dits[2] = 1.0100;
2218   iI030dits[3] = 0.0150;
2219   gMC->Gsvolu("I030", "TRD1", idtmed[208], iI030dits, 4);  
2220
2221   // inox cooling tubes for the end ladder - F.T. March,7-2001
2222   iI031dits[0] = 0.093;
2223   iI031dits[1] = 0.1;
2224   iI031dits[2] = iI024dits[2];
2225   gMC->Gsvolu("I031", "TUBE", idtmed[264], iI031dits, 3);  
2226
2227   if (fluid == 1) {
2228      // cooling water for the end ladder - F.T. March,7-2001
2229      iI032dits[0] = 0;
2230      iI032dits[1] = iI031dits[0];
2231      iI032dits[2] = iI024dits[2];
2232      gMC->Gsvolu("I032", "TUBE", idtmed[211], iI032dits, 3);  
2233   } else {
2234      // cooling freon for the end ladder - R.B. March,21-2001
2235      iI032dits[0] = 0;
2236      iI032dits[1] = iI031dits[0];
2237      iI032dits[2] = iI024dits[2];
2238      gMC->Gsvolu("I032", "TUBE", idtmed[212], iI032dits, 3);    
2239   }
2240   
2241   // -- block of the SDD ladder frame holding the electronics
2242
2243   // edge of the ladder frame - part 1
2244   dits[0] = 0.2;
2245   dits[1] = 0.182;
2246   dits[2] = 3.65;
2247   dits[3] = 0.015;
2248   gMC->Gsvolu("I019", "TRD1", idtmed[208], dits, 4);  
2249
2250   // edge of the ladder frame - part 2
2251   dits[0] = 0.183;
2252   dits[1] = 0.165;
2253   dits[2] = 3.65;
2254   dits[3] = 0.015;
2255   gMC->Gsvolu("I020", "TRD1", idtmed[208], dits, 4);  
2256
2257   // inclined segments of the ladder frame
2258   dits[0] = 2.23;
2259   dits[1] = 2.1;
2260   dits[2] = 0.05;
2261   dits[3] = 0.03;
2262   gMC->Gsvolu("I021", "TRD1", idtmed[208], dits, 4);  
2263
2264   // horiz.segments of the ladders, normal to ladder edges
2265   dits[0] = 2.1;
2266   dits[1] = 2;
2267   dits[2] = 0.06;
2268   dits[3] = 0.04;
2269   gMC->Gsvolu("I022", "TRD1", idtmed[208], dits, 4);  
2270
2271   // horiz.segments of the ladders, at 45 deg. to ladder edges
2272   dits[0] = 2.615;
2273   dits[1] = 2.465;
2274   dits[2] = 0.06;
2275   dits[3] = 0.04;
2276   gMC->Gsvolu("I023", "TRD1", idtmed[208], dits, 4);  
2277
2278   // supports of the ceramic pins holding the detectors
2279   dits[0] = 0.3;
2280   dits[1] = 0.05;
2281   dits[2] = 0.15;
2282   gMC->Gsvolu("I033", "BOX ", idtmed[208], dits, 3);  
2283
2284   // ceramic pins holding the detectors
2285   dits[0] = 0;
2286   dits[1] = 0.05;
2287   dits[2] = 0.225;
2288   gMC->Gsvolu("I034", "TUBE", idtmed[277], dits, 3);  
2289
2290   // holders of cooling tubes
2291   iI035dits[0] = 0.1;
2292   iI035dits[1] = 0.15;
2293   iI035dits[2] = 0.2;
2294   gMC->Gsvolu("I035", "TUBE", idtmed[208], iI035dits, 3);
2295
2296   // top holders of microcables
2297   dits[0] = 0.2;
2298   dits[1] = 0.01;
2299   dits[2] = 0.05;
2300   gMC->Gsvolu("I036", "BOX ", idtmed[208], dits, 3);  
2301
2302   // inox cooling tubes - F.T. March,7-2001
2303   iI037dits[0] = 0.093;
2304   iI037dits[1] = 0.1;
2305   iI037dits[2] = iI018dits[2];
2306   gMC->Gsvolu("I037", "TUBE", idtmed[264], iI037dits, 3);
2307
2308   if (fluid == 1) {
2309      // cooling water - F.T. March,7-2001
2310      iI038dits[0] = 0;
2311      iI038dits[1] = iI037dits[0];
2312      iI038dits[2] = iI018dits[2];
2313      gMC->Gsvolu("I038", "TUBE", idtmed[211], iI038dits, 3);  
2314   } else {
2315      // cooling freon - R.B. March,21-2001
2316      iI038dits[0] = 0;
2317      iI038dits[1] = iI037dits[0];
2318      iI038dits[2] = iI018dits[2];
2319      gMC->Gsvolu("I038", "TUBE", idtmed[212], iI038dits, 3);    
2320   }
2321   // -- block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
2322
2323   // SDD heat bridge - F.T. March,7-2001
2324   iI039dits[0] = 1.1000;
2325   iI039dits[1] = 0.0087;
2326   iI039dits[2] = 3.2500;
2327   gMC->Gsvolu("I039", "BOX ", idtmed[268], iI039dits, 3);  
2328
2329   // SDD clip part 1
2330   dits[0] = 0.25;
2331   dits[1] = 0.01;
2332   dits[2] = iI039dits[2];
2333   gMC->Gsvolu("I040", "BOX ", idtmed[268], dits, 3);  
2334
2335   // SDD clip part 2
2336   iI041dits[0] = 0.1;
2337   iI041dits[1] = 0.12;
2338   iI041dits[2] = iI039dits[2];
2339   iI041dits[3] = 90;
2340   iI041dits[4] = 320;
2341   gMC->Gsvolu("I041", "TUBS", idtmed[268], iI041dits, 5);  
2342
2343
2344   // SDD PASCAL - F.T. March,7-2001
2345   iI042dits[0] = 0.5000;
2346   iI042dits[1] = 0.0175;
2347   iI042dits[2] = 0.5000;
2348   gMC->Gsvolu("I042", "BOX ", idtmed[206], iI042dits, 3);  
2349
2350   // SDD AMBRA - F.T. March,7-2001
2351   iI043dits[0] = 0.3500;
2352   iI043dits[1] = 0.0175;
2353   iI043dits[2] = 0.5000;
2354   gMC->Gsvolu("I043", "BOX ", idtmed[206], iI043dits, 3);  
2355
2356   // SDD capacitors - F.T. March,7-2001
2357   iI051dits[0] = 0.1400;
2358   iI051dits[1] = 0.0350;
2359   iI051dits[2] = 0.0625;
2360   gMC->Gsvolu("I051", "BOX ", idtmed[276], iI051dits, 3);  
2361
2362   // SDD hybrid circuit - F.T. March,7-2001
2363   iI052dits[0] = 1.725000;
2364   iI052dits[1] = 0.003743;
2365   iI052dits[2] = iI039dits[2];
2366   gMC->Gsvolu("I052", "BOX ", idtmed[281], iI052dits, 3);
2367
2368   // SDD anode microcable : changed - F.T. March,7-2001
2369   iI044dits[0] = iI018dits[2];
2370   iI044dits[1] = iI039dits[2];
2371   iI044dits[2] = 0.00084;
2372   iI044dits[3] = (15.189149/(iI044dits[0]+iI044dits[1]))/2;
2373   gMC->Gsvolu("I044", "TRD1", idtmed[282], iI044dits, 4);  
2374   volI044 = ((2*iI044dits[0] + 2*iI044dits[1]) * 2*iI044dits[2])/2 * 2*iI044dits[3];
2375
2376   // SDD electronics box - F.T. March,7-2001
2377   iI050dits[1] = iI039dits[1]+iI052dits[1]+iI051dits[1]+iI044dits[2];
2378   iI050dits[0] = iI018dits[1]/cos(30.*3.14159/180.)-iI050dits[1]*sin(30.*3.14159/180.);
2379   iI050dits[2] = iI018dits[2];
2380   gMC->Gsvolu("I050", "BOX ", idtmed[209], iI050dits, 3);
2381
2382   // SDD sensitive volume
2383   dits[0] = 3.50850;
2384   dits[1] = 0.01499; // not 0.015 because it is included into I302 which is 0.015
2385   dits[2] = 3.76320;
2386   gMC->Gsvolu("ITS3", "BOX ", idtmed[200], dits, 3);  
2387
2388   // Like for ITS3 - F.T. March,7-2001
2389   dits[0] = 3.50850;
2390   dits[1] = 0.01499; // not 0.015 because it is included into I402 which is 0.015
2391   dits[2] = 3.76320;
2392   gMC->Gsvolu("ITS4", "BOX ", idtmed[200], dits, 3);  
2393   }
2394
2395   // --- Define SSD volumes ------------------------------------------
2396
2397   if (! AliITSInitGeometry::SSDIsTGeoNative()) {
2398   dits[0] = 0;
2399   dits[1] = 360;
2400   dits[2] = 6;
2401   dits[3] = -57.45;
2402   dits[4] = 43.6;
2403   dits[5] = 48;  
2404   dits[6] = -49.15; 
2405   dits[7] = 43.6;
2406   dits[8] = 48;  
2407   dits[9] = -49.15;  
2408   dits[10] = 36.9;
2409   dits[11] = 48;  
2410   dits[12] = 50.55;  
2411   dits[13] = 36.9;
2412   dits[14] = 48;  
2413   dits[15] = 50.55;  
2414   dits[16] = 43.6;
2415   dits[17] = 48;  
2416   dits[18] = 57.45;
2417   dits[19] = 43.6;
2418   dits[20] = 48;   
2419   //gMC->Gsvolu("IT56", "PCON", idtmed[220], dits, 21);  // SSD air 
2420   gMC->Gsvolu("IT56", "PCON", idtmed[204], dits, 21);    // air 
2421   
2422   dits[0] =  3.4;
2423   dits[1] = 1.955;
2424   dits[2] = 56.5; 
2425   gMC->Gsvolu("I570", "BOX ", idtmed[204], dits, 3);  
2426   
2427   dits[0] = 3.75;
2428   dits[1] = 0.045;
2429   dits[2] = 50.975;
2430   gMC->Gsvolu("I569", "BOX ", idtmed[204], dits, 3);  
2431   
2432   dits[0] = 3.4;
2433   dits[1] = 1.955;
2434   dits[2] = 47; 
2435   gMC->Gsvolu("I571", "BOX ", idtmed[204], dits, 3);  
2436   
2437   dits[0] = 3.75;
2438   dits[1] = 0.045;
2439   dits[2] = 43.3;  
2440   gMC->Gsvolu("I565", "BOX ", idtmed[204], dits, 3);  
2441   
2442   dits[0] = 3.4;
2443   dits[1] = 1.955;
2444   dits[2] = 3.15;
2445   gMC->Gsvolu("I553", "BOX ", idtmed[204], dits, 3);  
2446   
2447   dits[0] = 3.405;
2448   dits[1] = 1.955;
2449   dits[2] = 1.955;
2450   gMC->Gsvolu("I523", "BOX ", idtmed[204], dits, 3);  
2451   
2452   dits[0] = 3.75;
2453   dits[1] = 0.015;
2454   dits[2] = 2.1;
2455   gMC->Gsvolu("I566", "BOX ", idtmed[206], dits, 3); 
2456   
2457   dits[0] = 3.4;
2458   dits[1] = 1.955;
2459   dits[2] = 3.15;
2460   gMC->Gsvolu("I544", "BOX ", idtmed[204], dits, 3);  
2461   
2462   dits[0] = 3.41;
2463   dits[1] = 1.955;
2464   dits[2] = 1.955;
2465   gMC->Gsvolu("I516", "BOX ", idtmed[204], dits, 3);  
2466   
2467   dits[0] = 3.75;
2468   dits[1] = 0.015;
2469   dits[2] = 2.1;
2470   gMC->Gsvolu("I562", "BOX ", idtmed[206], dits, 3);   
2471   
2472   if (fluid == 1) {
2473      dits[0] = 0;
2474      dits[1] = 0.07;
2475      dits[2] = 3.15;
2476      gMC->Gsvolu("I559", "TUBE", idtmed[211], dits, 3);  // set water as cooling fluid
2477   } else {
2478      dits[0] = 0;
2479      dits[1] = 0.07;
2480      dits[2] = 3.15;
2481      gMC->Gsvolu("I559", "TUBE", idtmed[212], dits, 3);  // set freon as cooling fluid
2482   }
2483   
2484   dits[0] = 0.07;
2485   dits[1] = 0.1;
2486   dits[2] = 3.15;
2487   gMC->Gsvolu("I560", "TUBE", idtmed[210], dits, 3);  
2488   
2489   dits[0] = 0.225;
2490   dits[1] = 0.195;
2491   dits[2] = 3.15;
2492   dits[3] = 0.025;
2493   gMC->Gsvolu("I558", "TRD1", idtmed[203], dits, 4);  
2494   
2495   dits[0] = 0.25;
2496   dits[1] = 0.22;
2497   dits[2] = 3.15;
2498   dits[3] = 0.025;
2499   gMC->Gsvolu("I557", "TRD1", idtmed[203], dits, 4);  
2500   
2501   dits[0] = 2.17;
2502   dits[1] = 0.035;
2503   dits[2] = 0.05;
2504   gMC->Gsvolu("I556", "BOX ", idtmed[203], dits, 3);  
2505   
2506   dits[0] = 2 ;
2507   dits[1] = 0.035;
2508   dits[2] = 0.05;
2509   gMC->Gsvolu("I554", "BOX ", idtmed[203], dits, 3);  
2510   
2511   dits[0] = 2.675;
2512   dits[1] = 0.035;
2513   dits[2] = 0.05;
2514   gMC->Gsvolu("I555", "BOX ", idtmed[203], dits, 3); 
2515   
2516   dits[0] = 0.3;
2517   dits[1] = 0.15;
2518   dits[2] = 0.15;
2519   gMC->Gsvolu("I561", "BOX ", idtmed[203], dits, 3);  
2520   
2521   dits[0] = 0.025;
2522   dits[1] = 0.025;
2523   dits[2] = 0.05;
2524   gMC->Gsvolu("I519", "BOX ", idtmed[214], dits, 3);  
2525   
2526   dits[0] = 0.304;
2527   dits[1] = 0.0275;
2528   dits[2] = 0.432;
2529   gMC->Gsvolu("I521", "BOX ", idtmed[206], dits, 3);   
2530   
2531   dits[0] = 0.16;
2532   dits[1] = 0.08;
2533   dits[2] = 0.08;
2534   gMC->Gsvolu("I520", "BOX ", idtmed[214], dits, 3);  
2535   
2536   dits[0] = 3.4;
2537   dits[1] = 0.015;
2538   dits[2] = 0.525;
2539   gMC->Gsvolu("I518", "BOX ", idtmed[203], dits, 3);  
2540   
2541   dits[0] = 0.15;
2542   dits[1] = 0.105;
2543   dits[2] = 0.29;
2544   dits[3] = 0.08;
2545   gMC->Gsvolu("I522", "TRD1", idtmed[203], dits, 4);  
2546   
2547   dits[0] = 0.07;
2548   dits[1] = 0.1;
2549   dits[2] = 1.955;
2550   gMC->Gsvolu("I542", "TUBE", idtmed[210], dits, 3);  
2551   
2552   if (fluid == 1) {
2553      dits[0] = 0;
2554      dits[1] = 0.07;
2555      dits[2] = 1.955;
2556      gMC->Gsvolu("I541", "TUBE", idtmed[211], dits, 3);  // set water as cooling fluid 
2557   } else {
2558      dits[0] = 0;
2559      dits[1] = 0.07;
2560      dits[2] = 1.955;
2561      gMC->Gsvolu("I541", "TUBE", idtmed[212], dits, 3);  // set freon as cooling fluid
2562   }
2563   
2564   dits[0] = 0.3;
2565   dits[1] = 0.15;
2566   dits[2] = 0.15;
2567   gMC->Gsvolu("I543", "BOX ", idtmed[203], dits, 3);  
2568   
2569   dits[0] = 0.25;
2570   dits[1] = 0.22;
2571   dits[2] = 1.955;
2572   dits[3] = 0.025;
2573   gMC->Gsvolu("I537", "TRD1", idtmed[203], dits, 4); 
2574   
2575   dits[0] = 0.225;
2576   dits[1] = 0.195;
2577   dits[2] = 1.955;
2578   dits[4] = 0.025;
2579   gMC->Gsvolu("I538", "TRD1", idtmed[203], dits, 4);  
2580   
2581   dits[0] = 2.17;
2582   dits[1] = 0.035;
2583   dits[2] = 0.05;
2584   gMC->Gsvolu("I536", "BOX ", idtmed[203], dits, 3);  
2585   
2586   dits[0] = 2.675;
2587   dits[1] = 0.035;
2588   dits[2] = 0.05;
2589   gMC->Gsvolu("I535", "BOX ", idtmed[203], dits, 3);   
2590   
2591   dits[0] = 2;
2592   dits[1] = 0.035;
2593   dits[2] = 0.05;
2594   gMC->Gsvolu("I534", "BOX ", idtmed[203], dits, 3);  
2595   
2596   dits[0] = 0;
2597   dits[1] = 0.05;
2598   dits[2] = 0.17;
2599   gMC->Gsvolu("I540", "TUBE", idtmed[203], dits, 3);  
2600   
2601   dits[0] = 0;
2602   dits[1] = 0.05;
2603   dits[2] = 0.205;
2604   gMC->Gsvolu("I539", "TUBE", idtmed[203], dits, 3);  
2605   
2606   dits[0] = 3.65;
2607   dits[1] = 0.015;
2608   dits[2] = 2;
2609   gMC->Gsvolu("ITS6", "BOX ", idtmed[200], dits, 3);  
2610   
2611   if (fluid == 1) {
2612      dits[0] = 0;
2613      dits[1] = 0.07;
2614      dits[2] = 3.15;
2615      gMC->Gsvolu("I550", "TUBE", idtmed[211], dits, 3);  // set water as cooling fluid
2616   } else {
2617      dits[0] = 0;
2618      dits[1] = 0.07;
2619      dits[2] = 3.15;
2620      gMC->Gsvolu("I550", "TUBE", idtmed[212], dits, 3);  // set freon as cooling fluid
2621   }
2622   
2623   dits[0] = 0.07;
2624   dits[1] = 0.1;
2625   dits[2] = 3.15;
2626   gMC->Gsvolu("I551", "TUBE", idtmed[210], dits, 3);  
2627   
2628   dits[0] = 0.225;
2629   dits[1] = 0.195;
2630   dits[2] = 3.15;
2631   dits[3] = 0.025;
2632   gMC->Gsvolu("I549", "TRD1", idtmed[203], dits, 4); 
2633   
2634   dits[0] = 0.25;
2635   dits[1] = 0.22;
2636   dits[2] = 3.15;
2637   dits[3] = 0.025;
2638   gMC->Gsvolu("I548", "TRD1", idtmed[203], dits, 4);  
2639   
2640   dits[0] = 2.17;
2641   dits[1] = 0.035;
2642   dits[2] = 0.05;
2643   gMC->Gsvolu("I547", "BOX ", idtmed[203], dits, 3);  
2644   
2645   dits[0] = 2;
2646   dits[1] = 0.035;
2647   dits[2] = 0.05;
2648   gMC->Gsvolu("I545", "BOX ", idtmed[203], dits, 3);   
2649   
2650   dits[0] = 2.675;
2651   dits[1] = 0.035;
2652   dits[2] = 0.05;
2653   gMC->Gsvolu("I546", "BOX ", idtmed[203], dits, 3);  
2654   
2655   dits[0] = 0.3;
2656   dits[1] = 0.15;
2657   dits[2] = 0.15;
2658   gMC->Gsvolu("I552", "BOX ", idtmed[203], dits, 3);  
2659   
2660   dits[0] = 0.304;
2661   dits[1] = 0.0275;
2662   dits[2] = 0.4322;
2663   gMC->Gsvolu("I515", "BOX ", idtmed[206], dits, 3);  
2664   
2665   dits[0] = 0.025;
2666   dits[1] = 0.025;
2667   dits[2] = 0.05;
2668   gMC->Gsvolu("I513", "BOX ", idtmed[214], dits, 3);  
2669   
2670   dits[0] = 0.16;
2671   dits[1] = 0.08;
2672   dits[2] = 0.08;
2673   gMC->Gsvolu("I514", "BOX ", idtmed[214], dits, 3);  
2674   
2675   dits[0] = 3.4;
2676   dits[1] = 0.015;
2677   dits[2] = 0.525;
2678   gMC->Gsvolu("I512", "BOX ", idtmed[203], dits, 3);  
2679   
2680   dits[0] = 0.225;
2681   dits[1] = 0.195;
2682   dits[2] = 1.955;
2683   dits[3] = 0.025;
2684   gMC->Gsvolu("I528", "TRD1", idtmed[203], dits, 4); 
2685   
2686   dits[0] = 0.25;
2687   dits[1] = 0.22;
2688   dits[2] = 1.955;
2689   dits[3] = 0.025;
2690   gMC->Gsvolu("I527", "TRD1", idtmed[203], dits, 4);  
2691   
2692   dits[0] = 2.17;
2693   dits[1] = 0.035;
2694   dits[2] = 0.05;
2695   gMC->Gsvolu("I526", "BOX ", idtmed[203], dits, 3);  
2696   
2697   dits[0] = 2.675;
2698   dits[1] = 0.035;
2699   dits[2] = 0.05;
2700   gMC->Gsvolu("I525", "BOX ", idtmed[203], dits, 3);  
2701    
2702   dits[0] = 2;
2703   dits[1] = 0.035;
2704   dits[2] = 0.05;
2705   gMC->Gsvolu("I524", "BOX ", idtmed[203], dits, 3);  
2706    
2707   dits[0] = 0;
2708   dits[1] = 0.05;
2709   dits[2] = 0.205;
2710   gMC->Gsvolu("I529", "TUBE", idtmed[203], dits, 3);  
2711    
2712   dits[0] = 0;
2713   dits[1] = 0.05;
2714   dits[2] = 0.17;
2715   gMC->Gsvolu("I530", "TUBE", idtmed[203], dits, 3);  
2716    
2717   dits[0] = 0.15;
2718   dits[1] = 0.105;
2719   dits[2] = 0.29;
2720   dits[3] = 0.08;
2721   gMC->Gsvolu("I517", "TRD1", idtmed[203], dits, 4);  
2722   
2723   if (fluid == 1) {
2724      dits[0] = 0;
2725      dits[1] = 0.07;
2726      dits[2] = 1.955;
2727      gMC->Gsvolu("I531", "TUBE", idtmed[211], dits, 3);  // set water as cooling fluid
2728   } else {
2729      dits[0] = 0;
2730      dits[1] = 0.07;
2731      dits[2] = 1.955;
2732      gMC->Gsvolu("I531", "TUBE", idtmed[212], dits, 3);  // set freon as cooling fluid
2733   }
2734      
2735   dits[0] = 0.07;
2736   dits[1] = 0.1;
2737   dits[2] = 1.955;
2738   gMC->Gsvolu("I532", "TUBE", idtmed[210], dits, 3);  
2739  
2740   dits[0] = 0.3;
2741   dits[1] = 0.15;
2742   dits[2] = 0.15;
2743   gMC->Gsvolu("I533", "BOX ", idtmed[203], dits, 3);  
2744   
2745   dits[0] = 3.65;
2746   dits[1] = 0.015;
2747   dits[2] = 2;
2748   gMC->Gsvolu("ITS5", "BOX ", idtmed[200], dits, 3);  
2749   }
2750
2751
2752   // --- Define volumes of shield of SPD ----------------
2753
2754   if (! AliITSInitGeometry::SPDshieldIsTGeoNative()) {
2755   dits[0] = 8.37;
2756   dits[1] = 9.93;
2757   dits[2] = 25;
2758   gMC->Gsvolu("IC01", "TUBE", idtmed[289], dits, 3);   
2759
2760   dits[0] = 8.3;
2761   dits[1] = 9.995;
2762   dits[2] = 17.5/2.;
2763   gMC->Gsvolu("IC02", "TUBE", idtmed[289], dits, 3);    
2764   }
2765  
2766   Double_t s1,s2,b1,b2;
2767
2768   if (! AliITSInitGeometry::SDDconeIsTGeoNative()) {
2769
2770   // --- Define volume of first cylinder between SPD and SDD --------------
2771   dits[0] = (21.-0.128)/2.;      
2772   dits[1] = 21./2.;
2773   dits[2] = 39.4;      
2774   gMC->Gsvolu("ICY1", "TUBE", idtmed[208], dits, 3);
2775          
2776   // --- Define volume of second cylinder between SDD and SSD --------------
2777   dits[0] = (59.5-0.128)/2.;      
2778   dits[1] = 59.5/2.;
2779   dits[2] = 56.2;      // was 57
2780   gMC->Gsvolu("ICY2", "TUBE", idtmed[208], dits, 3);
2781
2782   // --- Define volumes of SDD cone ---------------------------------- 
2783
2784   dits[0] = 0;
2785   dits[1] = 360;
2786   dits[2] = 12;
2787   //
2788   dits[3] = -59.7;
2789   dits[4] = 27;
2790   dits[5] = 28.6;
2791
2792   dits[6] = -42.7;
2793   dits[7] = 10;
2794   dits[8] = 28.6;
2795
2796   //   dits[9] = -34.65;
2797   dits[9] = -33.55;
2798   dits[10] = 10;
2799   dits[11] = 28.6;
2800   
2801   //   dits[12] = -34.65;
2802   dits[12] = -33.55;
2803   dits[13] = 10;
2804   dits[14] = 23.495;
2805
2806   //dits[15] = -23.7;
2807   dits[15] = -26.2;
2808   dits[16] = 10;
2809   dits[17] = 23.495;
2810
2811   //dits[18] = -23.7;
2812   dits[18] = -26.2;
2813   dits[19] = 10;
2814   dits[20] = 14.595;
2815
2816   //dits[21] = 23.7;
2817   dits[21] = 26.2;
2818   dits[22] = 10;
2819   dits[23] = 14.595;
2820
2821   //dits[24] = 23.7;
2822   dits[24] = 26.2;
2823   dits[25] = 10;
2824   dits[26] = 23.495;
2825
2826 //   dits[27] = 34.65;
2827   dits[27] = 33.55;
2828   dits[28] = 10;
2829   dits[29] = 23.495;
2830
2831 //   dits[30] = 34.65;
2832   dits[30] = 33.55;
2833   dits[31] = 10;
2834   dits[32] = 28.6;
2835
2836   dits[33] = 42.7;
2837   dits[34] = 10;
2838   dits[35] = 28.6;
2839
2840   dits[36] = 59.7;
2841   dits[37] = 27.2637;
2842   dits[38] = 28.6;
2843
2844   if (! AliITSInitGeometry::SDDIsTGeoNative()) {
2845     dits[9] = -34.65;
2846     dits[12] = -34.65;
2847     dits[15] = -23.7;
2848     dits[18] = -23.7;
2849     dits[21] = 23.7;
2850     dits[24] = 23.7;
2851     dits[27] = 34.65;
2852     dits[30] = 34.65;
2853   } 
2854   gMC->Gsvolu("IS02", "PCON", idtmed[204], dits, 39);
2855   
2856   dits[0] = 0;
2857   dits[1] = 360;
2858   dits[2] = 6;
2859   dits[3] = 38.65;
2860   dits[4] = 10.75;    
2861   dits[5] = 12.25;      
2862   dits[6] = 40.15;
2863   dits[7] = 10.75;
2864   dits[8] = 13.96;   
2865   dits[9] = 40.15;
2866   dits[10] = 12.46;  
2867   dits[11] = 13.96;
2868   dits[12] = 55.75;
2869   dits[13] = 27;
2870   dits[14] = 28.5;
2871   dits[15] = 55.75;
2872   dits[16] = 27;
2873   dits[17] = 28.5;
2874   dits[18] = 57.25;
2875   dits[19] = 27;
2876   dits[20] = 28.5;
2877 //  gMC->Gsvolu("I093", "PCON", idtmed[272], dits, 21);  // SDD cone
2878   gMC->Gsvolu("I093", "PCON", idtmed[287], dits, 21);  // SDD cone
2879
2880   // Redefined to make adding material for cables easier (FMD geometry)
2881   s1 = (dits[13]-dits[10])/(dits[12]-dits[9]); // Slope of conical section
2882   s2 = (dits[14]-dits[11])/(dits[12]-dits[9]); // Slope of conical section
2883   b1 = dits[13] - s1*dits[12]; // inside cone axis intersept
2884   b2 = dits[14] - s2*dits[12]; // outside cone axis intersept
2885   dits[0] = 0; //dits[0] = 0;
2886   dits[1] = 50; //dits[1] = 50;
2887   dits[2] = 4; //dits[2] = 3;
2888
2889   dits[4] = 14.0; //dits[4] = 14;            // r inner
2890   dits[5] = dits[4]; //dits[5] = 18.75;      // r outer
2891   dits[3] = (dits[4]-b2)/s2; //dits[3] = 39;  // Z
2892
2893   dits[7] = dits[4]; //dits[7] = 14;             // r inner
2894   dits[6] = (dits[7]-b1)/s1; //dits[6] = 46.7-3;  // Z
2895   dits[8] = s2*dits[6]+b2; //dits[8] = 18.75;     // r outer
2896
2897   dits[11] = 18.75; //dits[11] = 18.75;           // r outer
2898   dits[9] = (dits[11]-b2)/s2; //dits[9] = 51.45-3; // Z
2899   dits[10] = s1*dits[9]+b1; //dits[10] = 18.75;    // r inner
2900
2901   dits[13] = dits[11];         // r inner
2902   dits[14] = dits[11];         // r outer
2903   dits[12] = (dits[13]-b1)/s1;  // Z
2904 //  gMC->Gsvolu("I099", "PCON", idtmed[204], dits, 12); // SDD 3 cone hole
2905   gMC->Gsvolu("I099", "PCON", idtmed[285], dits, 15); // SDD 3 cone hole
2906
2907   dits[0] = 0; //dits[0] = 0;
2908   dits[1] = 25; //dits[1] = 25;
2909   dits[2] = 4; //dits[2] = 3;
2910
2911   dits[4] = 23.4; //dits[4] = 23.4;  // r inner
2912   dits[5] = dits[4]; //dits[5] = 26.4;  // r outer
2913   dits[3] = (dits[4]-b2)/s2; //dits[3] = 49;  // Z
2914
2915   dits[7] = dits[4]; //dits[7] = 23.4;  // r inner
2916   dits[6] = (dits[7]-b1)/s1; //dits[6] = 56.1-3;  // Z
2917   dits[8] = s2*dits[6]+b2; //dits[8] = 26.4;  // r outer
2918
2919   dits[11] = 26.4; //dits[11] = 26.4;  // r outer
2920   dits[9] = (dits[11]-b2)/s2; //dits[9] = 59.1-3;  // Z
2921   dits[10] = s1*dits[9]+b1; //dits[10] = 26.4;  // r inner
2922
2923   dits[13] = dits[11];         // r inner
2924   dits[14] = dits[11];         // r outer
2925   dits[12] = (dits[13]-b1)/s1;  // Z
2926 //  gMC->Gsvolu("I200", "PCON", idtmed[204], dits, 12); // SDD 4 cone hole
2927   gMC->Gsvolu("I200", "PCON", idtmed[285], dits, 15); // SDD 4 cone hole
2928     //Begin_Html
2929     /*
2930       <img src="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_FMD_PMD_Geom.eps">
2931       </pre>
2932       <br clear=left>
2933       <font size=+2 color=blue>
2934       <p>SDD Support cone with other forward detectors. Shown in
2935           brown are a posible cabling layout.
2936       </font>
2937     */
2938     //End_Html
2939   dits[0] = 10.0;
2940   dits[1] = 10.5;
2941   dits[2] = 0.25;
2942   gMC->Gsvolu("I090", "TUBE", idtmed[224], dits, 3);  // SDD cylinder flange
2943
2944   dits[0] = 21.95;
2945   dits[1] = 22.95;    
2946   dits[2] = 1;
2947   gMC->Gsvolu("I098", "TUBE", idtmed[283], dits, 3);    // ladder support on layer 4
2948
2949   dits[0] = 13.1;    
2950   dits[1] = 14.1;    
2951   dits[2] = 1;
2952   gMC->Gsvolu("I097", "TUBE", idtmed[283], dits, 3);    // ladder support on layer 3
2953
2954   dits[0] = 1;
2955   dits[1] = 1;
2956   dits[2] = 7.74;
2957   gMC->Gsvolu("I202", "BOX ", idtmed[272], dits, 3);
2958
2959   if (AliITSInitGeometry::SDDIsTGeoNative())
2960     dits[0] = 0.9;
2961   else
2962     dits[0] = 1;
2963   dits[1] = 1;
2964   dits[2] = 9.14;
2965   gMC->Gsvolu("I203", "BOX ", idtmed[272], dits, 3);
2966
2967   dits[0] = 21.95;
2968   dits[1] = 22.95;
2969   dits[2] = 1;
2970   gMC->Gsvolu("I095", "TUBE", idtmed[224], dits, 3);
2971
2972   dits[0] = 3;
2973   dits[1] = 2.7;
2974   dits[2] = 1;
2975   dits[3] = 0.63;
2976   gMC->Gsvolu("I096", "TRD1", idtmed[264], dits, 4);
2977
2978   dits[0] = 13.1;
2979   dits[1] = 14.1;
2980   dits[2] = 1;
2981   gMC->Gsvolu("I094", "TUBE", idtmed[224], dits, 3);
2982   }
2983   
2984   if (! AliITSInitGeometry::SSDconeIsTGeoNative()) {
2985   // --- Define volumes of SSD cone ----------------------------------
2986
2987   dits[0] = 0;
2988   dits[1] = 360;
2989   dits[2] = 12;
2990
2991   dits[3] = -zmax;
2992   dits[4] = 46;
2993   dits[5] = 49.25;
2994
2995   dits[6] = -61.2;
2996   dits[7] = 28.7;
2997   dits[8] = 49.25;
2998
2999   dits[9] = -57.5;
3000   dits[10] = 28.7;
3001   dits[11] = 49.25;
3002    
3003   dits[12] = -57.5;
3004   dits[13] = 28.7;
3005   dits[14] = 43.5;
3006
3007   //dits[15] = -49.2;
3008   dits[15] = -53.4-0.75;
3009   dits[16] = 28.7;
3010   dits[17] = 43.5;
3011
3012   //dits[18] = -49.2;
3013   dits[18] = -53.4-0.75;
3014   dits[19] = 28.7;
3015   dits[20] = 36.85;
3016
3017   //dits[21] = 50.6;
3018   dits[21] = 53.4+0.75;
3019   dits[22] = 28.7;
3020   dits[23] = 36.85;
3021
3022   dits[24] = 53.4+0.75;
3023   //dits[24] = 50.6;
3024   dits[25] = 28.7;
3025   dits[26] = 43.5;
3026
3027   dits[27] = 57.5;
3028   dits[28] = 28.7;
3029   dits[29] = 43.5;
3030
3031   dits[30] = 57.5;
3032   dits[31] = 28.7;
3033   dits[32] = 49.25;
3034   
3035   dits[33] = 61.2;
3036   dits[34] = 28.7;
3037   dits[35] = 49.25;      
3038   dits[36] = zmax;
3039   dits[37] = 46;      
3040   dits[38] = 49.25;
3041
3042   if (! AliITSInitGeometry::SSDIsTGeoNative()) {
3043     dits[15] = -49.2;
3044     dits[18] = -49.2;
3045     dits[21] = 50.6;
3046     dits[24] = 50.6;
3047   }
3048   
3049   gMC->Gsvolu("IS01", "PCON", idtmed[204], dits, 39);   // SSD cone mother volume
3050   
3051   dits[0] = 0;
3052   dits[1] = 360;
3053   dits[2] = 6;
3054   dits[3] = -zmax;  
3055   dits[4] = 47.75;  
3056   dits[5] = 49.25;  
3057   dits[6] = -zmax+2.;  
3058   dits[7] = 47.75;  
3059   dits[8] = 49.25;   
3060   dits[9] = -71.2819;
3061   dits[10] = 46.75;   
3062   dits[11] = 49.0319;
3063   dits[12] = -57.25;   // was 58.5 
3064   dits[13] = 32.9681;
3065   dits[14] = 34.75;
3066   dits[15] = -57.25;   // was 58.5   
3067   dits[16] = 30;
3068   dits[17] = 34.75;
3069   dits[18] = -55.75;   // was 57 
3070   dits[19] = 30;     
3071   dits[20] = 32.25;    // was 31.5 
3072 //  gMC->Gsvolu("I212", "PCON", idtmed[272], dits, 21);  // SSD cone
3073   gMC->Gsvolu("I212", "PCON", idtmed[288], dits, 21);  // SSD cone
3074
3075   s1 = (dits[10]-dits[13])/(dits[9]-dits[12]); // Slope of conical section
3076   s2 = (dits[11]-dits[14])/(dits[9]-dits[12]); // Slope of conical section
3077   b1 = dits[13] - s1*dits[12]; // inside cone axis intersept
3078   b2 = dits[14] - s2*dits[12]; // outside cone axis intersept
3079   dits[0] = 0;
3080   dits[1] = 25;
3081   dits[2] = 4; //dits[2] = 5;
3082
3083   dits[4] = 45.50; //dits[4] = 45.5;  // r inner
3084   dits[5] = dits[4]; //dits[5] = 45.5;  // r outer
3085   dits[3] = (dits[4] - b1)/s1; //dits[3] = -zmax+3; // z
3086
3087   dits[8] = dits[4]; //dits[8] = 45.5;  // r outer
3088   dits[6] = (dits[8] - b2)/s2; //dits[6] = -69.7+3;; // z
3089   dits[7] = s1*dits[6] + b1; //dits[7] = 37;  // r inner
3090
3091   dits[10] = 37.00; //dits[10] = 37;  // r inner
3092   dits[9] = (dits[10]-b1)/s1; //dits[9] = -68.5+3;; // z
3093   dits[11] = s2*dits[9]+b2; //dits[11] = 45.5;  // r outer
3094
3095   dits[13] = dits[10]; //dits[13] = 37;  // r inner
3096   dits[14] = dits[13]; //dits[14] = 45.5;   // r outer
3097   dits[12] = (dits[14] - b2)/s2; //dits[12] = -68.5+4.8;; // z
3098 //  gMC->Gsvolu("I215", "PCON", idtmed[204], dits, 18);  // SSD cone hole 
3099   gMC->Gsvolu("I215", "PCON", idtmed[286], dits, 15);  // SSD cone hole 
3100     //Begin_Html
3101     /*
3102       <img src="http://www.Physics.ohio-state.edu/~nilsen/ITS/ITS_FMD_PMD_Geom.eps">
3103       </pre>
3104       <br clear=left>
3105       <font size=+2 color=blue>
3106       <p>SSD Support cone with other forward detectors. Shown in
3107           brown are a posible cabling layout.
3108       </font>
3109     */
3110     //End_Html
3111   
3112   dits[0] = 28.75;          
3113   dits[1] = 29.75;   
3114   dits[2] = 0.5;
3115   gMC->Gsvolu("I211", "TUBE", idtmed[224], dits, 3);   // SSD cylinder flange
3116   
3117   dits[0] = 35.8;   
3118   dits[1] = 36.8;   
3119   dits[2] = 1;
3120   gMC->Gsvolu("I217", "TUBE", idtmed[283], dits, 3);   // ladder support on layer 5 
3121   
3122   dits[0] = 41.4;  
3123   dits[1] = 42.4;  
3124   dits[2] = 1;
3125   gMC->Gsvolu("I219", "TUBE", idtmed[283], dits, 3);   // ladder support on layer 6
3126         
3127   dits[0] = 42.05+5.;       
3128   dits[1] = 42.55+5.;     
3129   dits[2] = 1.25;
3130   gMC->Gsvolu("I214", "TUBE", idtmed[224], dits, 3);   // layer 6 electronic support
3131                                                        // this will change after PPR
3132   dits[0] = 37.05+5.;   
3133   dits[1] = 37.55+5.;   
3134   dits[2] = 1.25;
3135   gMC->Gsvolu("I213", "TUBE", idtmed[224], dits, 3);   // layer 5 electronic support
3136                                                        // this will change after PPR
3137  
3138   dits[0] = 0;
3139   dits[1] = 3.2;
3140   dits[2] = 9;
3141   dits[3] = -14;
3142   dits[4] = 30.5;
3143   dits[5] = 33.5;
3144   dits[6] = -9.85;
3145   dits[7] = 30.5;
3146   dits[8] = 33.5;
3147   dits[9] = -9.85;
3148   dits[10] = 30.5;
3149   dits[11] = 43.45;
3150   dits[12] = -7.85;
3151   dits[13] = 30.5;
3152   dits[14] = 43.45;
3153   dits[15] = -7.85;
3154   dits[16] = 30.5;
3155   dits[17] = 36.5;
3156   dits[18] = -7;
3157   dits[19] = 30.5;
3158   dits[20] = 36.5;
3159   dits[21] = -4;
3160   dits[22] = 33.0173;
3161   dits[23] = 36.5;
3162   dits[24] = -4;
3163   dits[25] = 33.0173;
3164   dits[26] = 36.80;
3165   dits[27] = -2;
3166   dits[28] = 34.6955;
3167   dits[29] = 36.80;
3168   gMC->Gsvolu("I216", "PCON", idtmed[272], dits, 30); // supports (1-6) of the ladders
3169   }
3170   
3171
3172   // --- Place SPD (option 'b') volumes into their mother volume IT12
3173   
3174   // SPD - option 'b' 
3175   // (this is the default)
3176
3177   //if (option == 2) {
3178   if (! AliITSInitGeometry::SPDIsTGeoNative()) {
3179
3180      gMC->Gspos("I12B",1,"IT12",0.0,0.0,0.0,0,"ONLY");
3181      gMC->Gspos("I12B",8,"IT12",0.0,0.0,0.0,idrotm[233],"ONLY");
3182      gMC->Gspos("I12B",7,"IT12",0.0,0.0,0.0,idrotm[244],"ONLY");
3183      gMC->Gspos("I12B",6,"IT12",0.0,0.0,0.0,idrotm[236],"ONLY");
3184      gMC->Gspos("I12B",2,"IT12",0.0,0.0,0.0,idrotm[245],"ONLY");
3185      gMC->Gspos("I12B",3,"IT12",0.0,0.0,0.0,idrotm[234],"ONLY");
3186      gMC->Gspos("I12B",4,"IT12",0.0,0.0,0.0,idrotm[246],"ONLY");
3187      gMC->Gspos("I12B",5,"IT12",0.0,0.0,0.0,idrotm[247],"ONLY");
3188      gMC->Gspos("I12B",9,"IT12",0.0,0.0,0.0,idrotm[248],"ONLY");
3189      gMC->Gspos("I12B",10,"IT12",0.0,0.0,0.0,idrotm[249],"ONLY");
3190      deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(270.*TMath::Pi()/180.);  // see definition of idrotm[238]
3191           deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(270.*TMath::Pi()/180.);  // see definition of idrotm[238]
3192      gMC->Gspos("I10B",2,"I12B",0.203+deltax,3.8206+deltay,0.0,idrotm[238],"ONLY");       
3193      deltax=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Cos(252.*TMath::Pi()/180.);  // see definition of idrotm[239]
3194           deltay=((ddet1-0.01/2.)+(dchip1-0.015/2.))*TMath::Sin(252.*TMath::Pi()/180.);  // see definition of idrotm[239]  
3195      gMC->Gspos("I10B",1,"I12B",1.4531+deltax,3.8152+deltay,0.0,idrotm[239],"ONLY");
3196      deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(40.*TMath::Pi()/180.);  // see definition of idrotm[240]
3197           deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(40.*TMath::Pi()/180.);  // see definition of idrotm[240]  
3198      gMC->Gspos("I20B",1,"I12B",3.0174+deltax,6.5143+deltay,0.0,idrotm[240],"ONLY");
3199      deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(49.*TMath::Pi()/180.);  // see definition of idrotm[241]
3200           deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(49.*TMath::Pi()/180.);  // see definition of idrotm[241] 
3201      gMC->Gspos("I20B",2,"I12B",1.9612+deltax,6.9062+deltay,0.0,idrotm[241],"ONLY");
3202      deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(58.*TMath::Pi()/180.);  // see definition of idrotm[242]
3203           deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(58.*TMath::Pi()/180.);  // see definition of idrotm[242] 
3204      gMC->Gspos("I20B",3,"I12B",0.8567+deltax,7.1279+deltay,0.0,idrotm[242],"ONLY");
3205      deltax=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Cos(67.*TMath::Pi()/180.);  // see definition of idrotm[243]
3206           deltay=((ddet2-0.01/2.)+(dchip2-0.015/2.))*TMath::Sin(67.*TMath::Pi()/180.);  // see definition of idrotm[243] 
3207      gMC->Gspos("I20B",4,"I12B",-0.2689+deltax,7.1742+deltay,0.0,idrotm[243],"ONLY");
3208      gMC->Gspos("I123",1,"I12B",-0.2978,5.5196,0.0,idrotm[214],"ONLY");
3209      gMC->Gspos("I121",1,"I12B",-0.2385,4.1518,0.0,idrotm[213],"ONLY");
3210      gMC->Gspos("I122",1,"I12B",-0.2968,4.0207,0.0,idrotm[212],"ONLY");
3211      gMC->Gspos("I120",1,"I12B",-0.3672,3.9056,0.0,0,"ONLY");
3212      gMC->Gspos("I144",1,"I12B",-0.2538,3.8556,0.0,0,"ONLY");
3213      gMC->Gspos("I113",3,"I12B",0.1095,3.9056,0.0,0,"ONLY");
3214      gMC->Gspos("I143",1,"I12B",0.4365,3.8556,0.0,idrotm[236],"ONLY");
3215      gMC->Gspos("I142",1,"I12B",0.5136,3.9056,0.0,idrotm[235],"ONLY");
3216      gMC->Gspos("I141",1,"I12B",0.5636,3.9752,0.0,idrotm[237],"ONLY");
3217      gMC->Gspos("I140",1,"I12B",0.6336,4.0447,0.0,idrotm[234],"ONLY");
3218      gMC->Gspos("I139",1,"I12B",0.8297,4.0545,0.0,idrotm[207],"ONLY");
3219      gMC->Gspos("I113",5,"I12B",1.2575,3.9681,0.0,idrotm[207],"ONLY");
3220      gMC->Gspos("I138",1,"I12B",1.66,3.7848,0.0,idrotm[207],"ONLY");
3221      gMC->Gspos("I137",1,"I12B",1.8556,3.7738,0.0,idrotm[233],"ONLY");
3222      gMC->Gspos("I136",1,"I12B",2.6224,4.874,0.0,idrotm[232],"ONLY");
3223      gMC->Gspos("I135",1,"I12B",3.2967,6.0337,0.0,idrotm[231],"ONLY");
3224      gMC->Gspos("I134",1,"I12B",3.266,6.1636,0.0,idrotm[230],"ONLY");
3225      gMC->Gspos("I113",1,"I12B",2.9903,6.4144,0.0,idrotm[211],"ONLY");
3226      gMC->Gspos("I133",3,"I12B",2.7631,6.7627,0.0,idrotm[230],"ONLY");
3227      gMC->Gspos("I132",3,"I12B",2.62,6.8555,0.0,idrotm[229],"ONLY");
3228      gMC->Gspos("I131",3,"I12B",2.648,6.6023,0.0,idrotm[228],"ONLY");
3229      gMC->Gspos("I130",3,"I12B",2.6569,6.3431,0.0,idrotm[227],"ONLY");
3230      gMC->Gspos("I129",3,"I12B",2.3906,6.4819,0.0,idrotm[226],"ONLY");
3231      gMC->Gspos("I113",2,"I12B",1.9488,6.7998,0.0,idrotm[210],"ONLY");
3232      gMC->Gspos("I133",2,"I12B",1.6699,7.1085,0.0,idrotm[226],"ONLY");
3233      gMC->Gspos("I132",2,"I12B",1.5142,7.1777,0.0,idrotm[225],"ONLY");
3234      gMC->Gspos("I131",2,"I12B",1.5814,6.932,0.0,idrotm[224],"ONLY");
3235      gMC->Gspos("I130",2,"I12B",1.6308,6.6774,0.0,idrotm[223],"ONLY");
3236      gMC->Gspos("I129",2,"I12B",1.346,6.7728,0.0,idrotm[222],"ONLY");
3237      gMC->Gspos("I113",6,"I12B",0.8599,7.0176,0.0,idrotm[209],"ONLY");
3238      gMC->Gspos("I133",1,"I12B",0.5362,7.2789,0.0,idrotm[222],"ONLY");
3239      gMC->Gspos("I132",1,"I12B",0.3715,7.3228,0.0,idrotm[221],"ONLY");
3240      gMC->Gspos("I131",1,"I12B",0.4763,7.0907,0.0,idrotm[220],"ONLY");
3241      gMC->Gspos("I130",1,"I12B",0.5649,6.8469,0.0,idrotm[219],"ONLY");
3242      gMC->Gspos("I129",1,"I12B",0.2688,6.8966,0.0,idrotm[218],"ONLY");
3243      gMC->Gspos("I113",4,"I12B",-0.2497,7.0624,0.0,idrotm[208],"ONLY");
3244      gMC->Gspos("I128",1,"I12B",-0.6103,7.2698,0.0,idrotm[218],"ONLY");
3245      gMC->Gspos("I126",1,"I12B",-0.7799,7.2874,0.0,idrotm[217],"ONLY");
3246      gMC->Gspos("I125",1,"I12B",-0.6315,7.0883,0.0,idrotm[216],"ONLY");
3247      gMC->Gspos("I124",1,"I12B",-0.4965,6.8742,0.0,idrotm[215],"ONLY");
3248      gMC->Gspos("I105",3,"I10B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
3249      gMC->Gspos("I105",4,"I10B",-0.05,-0.01,16.844,0,"ONLY");
3250
3251      // Insertion of half-stave level in old SPD1
3252      gGeoManager->MakeVolumeAssembly("L1H-STAVE0");
3253      gGeoManager->MakeVolumeAssembly("L1H-STAVE1");
3254      gMC->Gspos("L1H-STAVE0",1,"I10B",0,0,0,0,"ONLY");
3255      gMC->Gspos("L1H-STAVE1",1,"I10B",0,0,0,0,"ONLY");
3256      gMC->Gspos("I107",1,"L1H-STAVE0",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
3257      gMC->Gspos("I107",2,"L1H-STAVE0",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
3258      gMC->Gspos("I107",3,"L1H-STAVE1",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
3259      gMC->Gspos("I107",4,"L1H-STAVE1",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
3260      //      gMC->Gspos("I107",2,"I10B",-0.0455,-di10b[1]+di107[1],3.536,0,"ONLY");
3261      //      gMC->Gspos("I107",1,"I10B",-0.0455,-di10b[1]+di107[1],10.708,0,"ONLY");
3262      //      gMC->Gspos("I107",4,"I10B",-0.0455,-di10b[1]+di107[1],-10.708,0,"ONLY");
3263      //      gMC->Gspos("I107",3,"I10B",-0.0455,-di10b[1]+di107[1],-3.536,0,"ONLY");
3264
3265     // Insertion of half-stave level in old SPD2
3266      gGeoManager->MakeVolumeAssembly("L2H-STAVE0");
3267      gGeoManager->MakeVolumeAssembly("L2H-STAVE1");
3268      gMC->Gspos("L2H-STAVE0",1,"I20B",0,0,0,0,"ONLY");
3269      gMC->Gspos("L2H-STAVE1",1,"I20B",0,0,0,0,"ONLY");
3270      gMC->Gspos("I1D7",1,"L2H-STAVE0",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY");
3271      gMC->Gspos("I1D7",2,"L2H-STAVE0",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY");
3272      gMC->Gspos("I1D7",3,"L2H-STAVE1",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY");
3273      gMC->Gspos("I1D7",4,"L2H-STAVE1",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY");
3274 //      gMC->Gspos("I1D7",2,"I20B",-0.0455,-di20b[1]+di1d7[1],3.536,0,"ONLY");
3275 //      gMC->Gspos("I1D7",1,"I20B",-0.0455,-di20b[1]+di1d7[1],10.708,0,"ONLY");
3276 //      gMC->Gspos("I1D7",4,"I20B",-0.0455,-di20b[1]+di1d7[1],-10.708,0,"ONLY");
3277 //      gMC->Gspos("I1D7",3,"I20B",-0.0455,-di20b[1]+di1d7[1],-3.536,0,"ONLY");
3278
3279      gMC->Gspos("I109",1,"I10B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
3280      gMC->Gspos("I109",2,"I10B",-0.138,0.015,16.844,0,"ONLY");
3281      gMC->Gspos("I108",1,"I10B",-0.138,-di10b[1]+2.*di107[1]+di108[1],0.0,0,"ONLY");
3282      gMC->Gspos("I105",1,"I20B",-0.05,-0.01,-16.844,idrotm[201],"ONLY");
3283      gMC->Gspos("I105",2,"I20B",-0.05,-0.01,16.844,0,"ONLY");
3284      gMC->Gspos("I109",3,"I20B",-0.138,0.015,-16.844,idrotm[201],"ONLY");
3285      gMC->Gspos("I109",4,"I20B",-0.138,0.015,16.844,0,"ONLY");
3286      gMC->Gspos("I108",2,"I20B",-0.138,-di20b[1]+2.*di1d7[1]+di108[1],0.0,0,"ONLY");
3287      gMC->Gspos("I112",2,"I113",0.25,0.02,0.0,idrotm[206],"ONLY");
3288      gMC->Gspos("I111",2,"I113",0.1318,-0.0008,0.0,idrotm[205],"ONLY");
3289      gMC->Gspos("I118",1,"I113",0.0,-0.0454,0.0,0,"ONLY");
3290      gMC->Gspos("I110",1,"I113",0.0,0.0492,0.0,0,"ONLY");
3291      gMC->Gspos("I114",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY");
3292      gMC->Gspos("I115",1,"I113",0.063,0.0042,0.0,idrotm[202],"ONLY");
3293      gMC->Gspos("I115",2,"I113",-0.063,0.0042,0.0,idrotm[237],"ONLY");
3294      gMC->Gspos("I114",2,"I113",-0.063,0.0042,0.0,idrotm[237],"ONLY");
3295      gMC->Gspos("I116",1,"I113",0.0,0.0042,0.0,0,"ONLY");
3296      gMC->Gspos("I111",1,"I113",-0.1318,-0.0008,0.0,idrotm[204],"ONLY");
3297      gMC->Gspos("I112",1,"I113",-0.25,0.02,0.0,idrotm[203],"ONLY");
3298      gMC->Gspos("I106",1,"I107",0.0,-ddet1,-1.4,0,"ONLY");
3299      gMC->Gspos("I106",2,"I107",0.0,-ddet1,0.0,0,"ONLY");
3300      gMC->Gspos("I106",3,"I107",0.0,-ddet1,1.4,0,"ONLY");
3301      gMC->Gspos("I106",4,"I107",0.0,-ddet1,2.8,0,"ONLY");
3302      gMC->Gspos("I106",5,"I107",0.0,-ddet1,-2.8,0,"ONLY");
3303      gMC->Gspos("I101",1,"I107",0.0,dchip1,0.0,0,"ONLY");
3304      gMC->Gspos("I1D6",1,"I1D7",0.0,-ddet2,-1.4,0,"ONLY");
3305      gMC->Gspos("I1D6",2,"I1D7",0.0,-ddet2,0.0,0,"ONLY");
3306      gMC->Gspos("I1D6",3,"I1D7",0.0,-ddet2,1.4,0,"ONLY");
3307      gMC->Gspos("I1D6",4,"I1D7",0.0,-ddet2,2.8,0,"ONLY");
3308      gMC->Gspos("I1D6",5,"I1D7",0.0,-ddet2,-2.8,0,"ONLY");
3309      gMC->Gspos("I1D1",1,"I1D7",0.0,dchip2,0.0,0,"ONLY");
3310      gMC->Gspos("I117",1,"I116",0.0,0.0,0.0,0,"ONLY");
3311      gMC->Gspos("ITS1",1,"I101",0.0,0.0,0.0,0,"ONLY");
3312      gMC->Gspos("ITS2",1,"I1D1",0.0,0.0,0.0,0,"ONLY");
3313      gMC->Gspos("I651",1,"IT12",0.0,0.0,26.05,0,"ONLY");
3314      gMC->Gspos("I651",2,"IT12",0.0,0.0,-26.05,0,"ONLY");
3315      
3316      gMC->Gspos("I650",16,"IT12",0.0,0.0,22.0,idrotm[1104],"ONLY");
3317      gMC->Gspos("I650",20,"IT12",0.0,0.0,22.0,idrotm[1130],"ONLY");
3318      gMC->Gspos("I650",18,"IT12",0.0,0.0,22.0,idrotm[1117],"ONLY");
3319      gMC->Gspos("I650",1,"IT12",0.0,0.0,22.0,0,"ONLY");
3320      gMC->Gspos("I650",4,"IT12",0.0,0.0,22.0,idrotm[1106],"ONLY");
3321      gMC->Gspos("I650",6,"IT12",0.0,0.0,22.0,idrotm[1039],"ONLY");
3322      gMC->Gspos("I650",8,"IT12",0.0,0.0,22.0,idrotm[1107],"ONLY");
3323      gMC->Gspos("I650",10,"IT12",0.0,0.0,22.0,idrotm[1065],"ONLY");
3324      gMC->Gspos("I650",12,"IT12",0.0,0.0,22.0,idrotm[1078],"ONLY");
3325      gMC->Gspos("I650",14,"IT12",0.0,0.0,22.0,idrotm[1091],"ONLY");
3326      gMC->Gspos("I650",19,"IT12",0.0,0.0,-22.0,idrotm[1108],"ONLY");
3327      gMC->Gspos("I650",2,"IT12",0.0,0.0,-22.0,idrotm[1109],"ONLY");
3328      gMC->Gspos("I650",3,"IT12",0.0,0.0,-22.0,idrotm[1110],"ONLY");
3329      gMC->Gspos("I650",5,"IT12",0.0,0.0,-22.0,idrotm[1111],"ONLY");
3330      gMC->Gspos("I650",7,"IT12",0.0,0.0,-22.0,idrotm[1112],"ONLY");
3331      gMC->Gspos("I650",9,"IT12",0.0,0.0,-22.0,idrotm[1113],"ONLY");
3332      gMC->Gspos("I650",11,"IT12",0.0,0.0,-22.0,idrotm[1114],"ONLY");
3333      gMC->Gspos("I650",13,"IT12",0.0,0.0,-22.0,idrotm[1115],"ONLY");
3334      gMC->Gspos("I650",15,"IT12",0.0,0.0,-22.0,idrotm[1116],"ONLY");
3335      gMC->Gspos("I650",17,"IT12",0.0,0.0,-22.0,idrotm[1118],"ONLY");
3336      gMC->Gspos("I666",1,"I650",0.0,0.0,0.25,idrotm[1003],"ONLY");
3337
3338      gMC->Gspos("I667",1,"I650",0.1102,0.9945,0.45,idrotm[1088],"ONLY");
3339      gMC->Gspos("I669",3,"I650",0.1883,4.0372,-3.2,0,"ONLY");
3340      gMC->Gspos("I671",3,"I650",0.1883,4.0372,0.6,0,"ONLY");
3341      gMC->Gspos("I669",2,"I650",1.3343,4.0609,-3.2,0,"ONLY");
3342      gMC->Gspos("I671",2,"I650",1.3343,4.0609,0.6,0,"ONLY");
3343      gMC->Gspos("I669",6,"I650",2.9567,6.1959,-3.2,idrotm[1089],"ONLY");
3344      gMC->Gspos("I671",6,"I650",2.9567,6.1959,0.6,idrotm[1089],"ONLY");
3345      gMC->Gspos("I669",5,"I650",1.9511,6.5822,-3.2,idrotm[1011],"ONLY");
3346      gMC->Gspos("I671",5,"I650",1.9511,6.5822,0.6,idrotm[1011],"ONLY");
3347      gMC->Gspos("I669",4,"I650",0.8974,6.8064,-3.2,idrotm[1090],"ONLY");
3348      gMC->Gspos("I671",4,"I650",0.8974,6.8064,0.6,idrotm[1090],"ONLY");
3349      gMC->Gspos("I669",1,"I650",-0.1784,6.863,-3.2,0,"ONLY");
3350      gMC->Gspos("I671",1,"I650",-0.1784,6.863,0.6,0,"ONLY");
3351      gMC->Gspos("I673",1,"I650",0.2173,4.8037,1.8,0,"ONLY");
3352      gMC->Gspos("I673",6,"I650",1.5093,4.5605,1.8,0,"ONLY");
3353      gMC->Gspos("I673",4,"I650",-0.173,6.2531,1.8,idrotm[1092],"ONLY");
3354      gMC->Gspos("I673",3,"I650",0.8073,6.2032,1.8,idrotm[1093],"ONLY");
3355      gMC->Gspos("I673",2,"I650",1.7678,6.0005,1.8,idrotm[1094],"ONLY");
3356      gMC->Gspos("I673",5,"I650",2.6847,5.6501,1.8,0,"ONLY");
3357      gMC->Gspos("I676",2,"I650",1.7618,5.2269,2.5,0,"ONLY");
3358      gMC->Gspos("I676",1,"I650",0.4018,5.5869,2.5,0,"ONLY");
3359      gMC->Gspos("I668",1,"I667",0.0,0.0,0.0,0,"ONLY");
3360      gMC->Gspos("I670",1,"I669",0.0,0.0,0.0,0,"ONLY");
3361      gMC->Gspos("I672",1,"I671",0.0,0.0,0.0,0,"ONLY");
3362      gMC->Gspos("I674",1,"I673",0.0,0.0,0.0,0,"MANY");
3363      gMC->Gspos("I675",1,"I673",0.0,0.0,-0.5,0,"ONLY");
3364      gMC->Gspos("I677",1,"I676",0.0,0.0,0.0,0,"ONLY");
3365      gMC->Gspos("I678",1,"I676",0.0,0.0,-0.95,0,"ONLY");  
3366   }
3367     
3368   // --- Place SDD volumes into their mother volume IT34
3369  
3370   // -- position SDD detectors of ladder 3 / layer 3
3371   if (! AliITSInitGeometry::SDDIsTGeoNative()) {
3372
3373   gMC->Gspos("ITS3", 1,"I302",  0.0,      0.0,    0.0,    0,           "ONLY");
3374   ySDD = ySDDsep/2.+iI302dits[1];
3375   for (iSDD=0; iSDD<6; iSDD++) {
3376     gMC->Gspos("I302", iSDD+1, "I004",  0.0, ySDD,  zSDDlay3[iSDD], 0, "ONLY");
3377     ySDD = -ySDD;
3378   }
3379
3380   gMC->Gspos("I004", 1,"IT34", -3.2777,  14.3607, 0.0,   idrotm[321],"ONLY");
3381   gMC->Gspos("I004", 2,"IT34", -9.5581,  11.9855, 0.0,   idrotm[333],"ONLY");
3382   gMC->Gspos("I004", 3,"IT34",-13.2713,   6.3911, 0.0,   idrotm[336],"ONLY");
3383   gMC->Gspos("I004", 4,"IT34",-15.33,     0.0,    0.0,   idrotm[350],"ONLY");
3384   gMC->Gspos("I004", 5,"IT34",-13.2713,  -6.3911, 0.0,   idrotm[313],"ONLY");
3385   gMC->Gspos("I004", 6,"IT34", -9.5581, -11.9855, 0.0,   idrotm[311],"ONLY");
3386   gMC->Gspos("I004", 7,"IT34", -3.2777, -14.3607, 0.0,   idrotm[310],"ONLY");
3387   gMC->Gspos("I004", 8,"IT34",  3.4112, -14.9456, 0.0,   idrotm[386],"ONLY");
3388   gMC->Gspos("I004", 9,"IT34",  9.184,  -11.5164, 0.0,   idrotm[309],"ONLY");
3389   gMC->Gspos("I004",10,"IT34", 13.8119,  -6.6514, 0.0,   idrotm[308],"ONLY");
3390   gMC->Gspos("I004",11,"IT34", 14.73,     0.0,    0.0,   idrotm[356],"ONLY");
3391   gMC->Gspos("I004",12,"IT34", 13.8119,   6.6514, 0.0,   idrotm[307],"ONLY");
3392   gMC->Gspos("I004",13,"IT34",  9.184,   11.5164, 0.0,   idrotm[306],"ONLY");
3393   gMC->Gspos("I004",14,"IT34",  3.4113,  14.9456, 0.0,   idrotm[305],"ONLY");
3394
3395
3396   // -- position SDD detectors of ladder 4 / layer 4
3397
3398   gMC->Gspos("ITS4", 1,"I402",  0.0,      0.000,  0.0,   0,"ONLY");
3399   ySDD = -(ySDDsep/2.+iI402dits[1]);
3400   for (iSDD=0; iSDD<8; iSDD++) {
3401     gMC->Gspos("I402", iSDD+1, "I005",  0.0, ySDD,  zSDDlay4[iSDD], 0, "ONLY");
3402     ySDD = -ySDD;
3403   }
3404   
3405   gMC->Gspos("I005", 1,"IT34", -3.3629,  23.3895,-0.15,  idrotm[335],"ONLY");
3406   gMC->Gspos("I005", 2,"IT34",-10.0447,  21.9949,-0.15,  idrotm[332],"ONLY");
3407   gMC->Gspos("I005", 3,"IT34",-15.4744,  17.8584,-0.15,  idrotm[331],"ONLY");
3408   gMC->Gspos("I005", 4,"IT34",-20.3415,  13.0727,-0.15,  idrotm[366],"ONLY");
3409   gMC->Gspos("I005", 5,"IT34",-22.6728,   6.6573,-0.15,  idrotm[330],"ONLY");
3410   gMC->Gspos("I005", 6,"IT34",-24.18,     0.0,   -0.15,  idrotm[350],"ONLY");
3411   gMC->Gspos("I005", 7,"IT34",-22.6728,  -6.6573,-0.15,  idrotm[329],"ONLY");
3412   gMC->Gspos("I005", 8,"IT34",-20.3415, -13.0727,-0.15,  idrotm[328],"ONLY");
3413   gMC->Gspos("I005", 9,"IT34",-15.4744, -17.8584,-0.15,  idrotm[327],"ONLY");
3414   gMC->Gspos("I005",10,"IT34",-10.0447, -21.9949,-0.15,  idrotm[326],"ONLY");
3415   gMC->Gspos("I005",11,"IT34", -3.3629, -23.3895,-0.15,  idrotm[325],"ONLY");
3416   gMC->Gspos("I005",12,"IT34",  3.4412, -23.9339,-0.15,  idrotm[324],"ONLY");
3417   gMC->Gspos("I005",13,"IT34",  9.8163, -21.4946,-0.15,  idrotm[323],"ONLY");
3418   gMC->Gspos("I005",14,"IT34", 15.8345, -18.274, -0.15,  idrotm[322],"ONLY");
3419   gMC->Gspos("I005",15,"IT34", 19.8788, -12.7753,-0.15,  idrotm[320],"ONLY");
3420   gMC->Gspos("I005",16,"IT34", 23.2005,  -6.8123,-0.15,  idrotm[319],"ONLY");
3421   gMC->Gspos("I005",17,"IT34", 23.63,     0.0,   -0.15,  idrotm[318],"ONLY");
3422   gMC->Gspos("I005",18,"IT34", 23.2005,   6.8123,-0.15,  idrotm[317],"ONLY");
3423   gMC->Gspos("I005",19,"IT34", 19.8788,  12.7753,-0.15,  idrotm[316],"ONLY");
3424   gMC->Gspos("I005",20,"IT34", 15.8345,  18.274, -0.15,  idrotm[315],"ONLY");
3425   gMC->Gspos("I005",21,"IT34",  9.8163,  21.4946,-0.15,  idrotm[314],"ONLY");
3426   gMC->Gspos("I005",22,"IT34",  3.4412,  23.9339,-0.15,  idrotm[334],"ONLY");
3427
3428
3429   // -- build block of the SDD ladder frame holding the electronics
3430
3431   gMC->Gspos("I019", 1,"I018", -1.9,     -1.735,  0.0, idrotm[344], "ONLY");
3432   gMC->Gspos("I019", 2,"I018",  1.987,   -1.5843, 0.0, idrotm[343], "ONLY");
3433   gMC->Gspos("I019", 3,"I018", -0.087,    1.7066, 0.0, idrotm[342], "ONLY");
3434
3435   gMC->Gspos("I020", 1,"I018", -1.9782,  -1.569,  0.0, idrotm[342], "ONLY");
3436   gMC->Gspos("I020", 2,"I018",  1.8824,  -1.735,  0.0, idrotm[344], "ONLY");
3437   gMC->Gspos("I020", 3,"I018",  0.0958,   1.6913, 0.0, idrotm[343], "ONLY");
3438
3439   gMC->Gspos("I021", 1,"I018",  1.0761,   0.0835, 2.6008, idrotm[340], "ONLY");
3440   gMC->Gspos("I021", 2,"I018", -1.0761,   0.0835,-2.8008, idrotm[339], "ONLY");
3441   gMC->Gspos("I021", 3,"I018", -1.0761,   0.0835,-1.0492, idrotm[338], "ONLY");
3442   gMC->Gspos("I021", 4,"I018",  1.0761,   0.0835,-2.8008, idrotm[337], "ONLY");
3443   gMC->Gspos("I021", 5,"I018",  1.0761,   0.0835,-1.0492, idrotm[340], "ONLY");
3444   gMC->Gspos("I021", 6,"I018", -1.0761,   0.0835, 0.8492, idrotm[339], "ONLY");
3445   gMC->Gspos("I021", 7,"I018", -1.0761,   0.0835, 2.6008, idrotm[338], "ONLY");
3446   gMC->Gspos("I021", 8,"I018",  1.0761,   0.0835, 0.8492, idrotm[337], "ONLY");
3447
3448   gMC->Gspos("I022", 1,"I018",  0.0,     -1.79,   3.55,   idrotm[312], "ONLY");
3449   gMC->Gspos("I022", 2,"I018",  0.0,     -1.79,  -0.1,    idrotm[312], "ONLY");
3450
3451   gMC->Gspos("I023", 1,"I018",  0.0,     -1.79,   1.725,  idrotm[341], "ONLY");
3452   gMC->Gspos("I023", 2,"I018",  0.0,     -1.79,  -1.925,  idrotm[341], "ONLY");
3453
3454   gMC->Gspos("I033", 1,"I018",  1.8,     -1.75,   1.35,   0,           "MANY");
3455   gMC->Gspos("I033", 2,"I018", -1.8,     -1.75,  -2.65,   idrotm[345], "MANY");
3456   gMC->Gspos("I033", 3,"I018", -1.8,     -1.75,   1.35,   idrotm[345], "MANY");
3457   gMC->Gspos("I033", 4,"I018",  1.8,     -1.75,  -2.65,   0,           "MANY");
3458
3459   gMC->Gspos("I034", 1,"I018",  1.6,     -1.775,  1.35,   idrotm[312], "ONLY");
3460   gMC->Gspos("I034", 2,"I018", -1.6,     -1.775, -2.65,   idrotm[348], "ONLY");
3461   gMC->Gspos("I034", 3,"I018", -1.6,     -1.775,  1.35,   idrotm[348], "ONLY");
3462   gMC->Gspos("I034", 4,"I018",  1.6,     -1.775, -2.65,   idrotm[312], "ONLY");
3463
3464   gMC->Gspos("I035", 1,"I018",  1.7,     -0.55, iI018dits[2]-iI035dits[2], 0, "ONLY");
3465   gMC->Gspos("I035", 2,"I018", -1.7,     -0.55, iI018dits[2]-iI035dits[2], 0, "ONLY");
3466
3467   gMC->Gspos("I036", 1,"I018",  0.3087,   1.7191, 3.56,   idrotm[346], "ONLY");
3468   gMC->Gspos("I036", 2,"I018",  0.3087,   1.7191,-0.11,   idrotm[346], "ONLY");
3469   gMC->Gspos("I036", 3,"I018", -0.3087,   1.7191,-0.11,   idrotm[347], "ONLY");
3470   gMC->Gspos("I036", 4,"I018", -0.3087,   1.7191, 3.56,   idrotm[347], "ONLY");
3471
3472   gMC->Gspos("I037", 1,"I018",  iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
3473   gMC->Gspos("I037", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
3474
3475   gMC->Gspos("I038", 1,"I018",  iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
3476   gMC->Gspos("I038", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 , "ONLY");
3477
3478   gMC->Gspos("I040", 1,"I018",  1.9204,  -0.7118, 0.0, idrotm[346],"ONLY");
3479   gMC->Gspos("I040", 2,"I018", -1.9204,  -0.7118, 0.0, idrotm[347],"ONLY");
3480   gMC->Gspos("I041", 1,"I018",  iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], idrotm[346], "ONLY");
3481   gMC->Gspos("I041", 2,"I018", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], idrotm[347], "ONLY");
3482
3483
3484   // -- build block of the SDD electronics (heat bridge, chips, hybrid, anode microcable)
3485
3486   xI050 = iSDDCoolPipe[0]+iSDDCoolPipe[1]*sin30+iI050dits[1]/cos30+iI041dits[1];
3487   yI050 = 0;
3488   xI039 = -iSDDCoolPipe[1]/cos30;
3489   yI039 = -iI050dits[1]+iI039dits[1];
3490   gMC->Gspos("I039", 1,"I050",  xI039, yI039, 0.0, 0, "ONLY");
3491   xI042 = xI039+iI039dits[0]-xI042space-iI042dits[0];
3492   yI042 = yI039+iI039dits[1]+iI042dits[1];
3493   xI043 = xI039-iI039dits[0]+xI043space+iI043dits[0];
3494   yI043 = yI039+iI039dits[1]+iI043dits[1];
3495   zChipSpace = iI042dits[2];
3496   if (zChipSpace < iI043dits[2]) {
3497     zChipSpace = iI043dits[2];
3498   }
3499   zChipSpace = zChipSpace * 2;
3500   yI051space = (2*iI039dits[2] - 4*zChipSpace)/5;
3501   zchip = -iI039dits[2] + yI051space + zChipSpace/2.;
3502   for (ichip=0; ichip<4; ichip++) { 
3503     gMC->Gspos("I042", ichip+1, "I050", xI042, yI042, zchip, 0, "ONLY");
3504     gMC->Gspos("I043", ichip+1, "I050", xI043, yI043, zchip, 0, "ONLY");
3505     zchip += zChipSpace + yI051space;
3506   }
3507   xcap = 2*iI039dits[0]/5.;
3508   yI051 = yI039+iI039dits[1]+iI051dits[1];
3509   zI051 = -iI039dits[2] + yI051space/3.;
3510   icap = 1;
3511   for (ichip=0; ichip<5; ichip++) { 
3512     xI051 = xI039-iI039dits[0]+xcap;
3513     gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
3514     zI051 += yI051space/3.;
3515     gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
3516     xI051 += xcap;
3517     gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
3518     xI051 += xcap;
3519     gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
3520     xI051 += xcap;
3521     gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
3522     zI051 -= yI051space/3.;
3523     if (ichip == 0) {
3524       gMC->Gspos("I051", icap++,"I050", xI051, yI051, zI051, 0, "ONLY");
3525     }
3526     zI051 += zChipSpace + yI051space;
3527   }
3528   xI052 = -iI050dits[0]+iI052dits[0];
3529   yI052 = yI051+iI051dits[1]+iI052dits[1];
3530   gMC->Gspos("I052", 1,"I050", xI052, yI052, 0.0, 0, "ONLY");
3531   xI044 = iI050dits[0]-iI044dits[3];
3532   yI044 = yI052+iI052dits[1]+iI044dits[2];
3533   gMC->Gspos("I044", 1,"I050", xI044, yI044, 0.0, idrotm[301], "ONLY");
3534   gMC->Gspos("I050", 1,"I018",  xI050,  yI050,  0.0, idrotm[346],"ONLY");
3535   gMC->Gspos("I050", 2,"I018", -xI050,  yI050,  0.0, idrotm[347],"ONLY");
3536
3537
3538   // -- build block of the SDD ladder frame at the end ladders
3539
3540   gMC->Gspos("I021",12,"I024",  1.0761,   0.0836,-0.1242, idrotm[340], "ONLY");
3541   gMC->Gspos("I021",11,"I024", -1.0761,   0.0836,-0.1242, idrotm[338], "ONLY");
3542   gMC->Gspos("I021",13,"I024", -1.0761,   0.0836,-1.8758, idrotm[339], "ONLY");
3543   gMC->Gspos("I021",14,"I024",  1.0761,   0.0836,-1.8758, idrotm[337], "ONLY");
3544
3545   gMC->Gspos("I022", 3,"I024",  0.0,     -1.7899, 0.825,  idrotm[312], "ONLY");
3546
3547   gMC->Gspos("I023", 3,"I024",  0.0,     -1.7899,-1.0,    idrotm[341], "ONLY");
3548
3549   gMC->Gspos("I025", 1,"I024", -1.9,     -1.7349, 0.0,    idrotm[344], "ONLY");
3550   gMC->Gspos("I025", 2,"I024",  1.987,   -1.5842, 0.0,    idrotm[343], "ONLY");
3551
3552   gMC->Gspos("I026", 1,"I024", -1.9782,  -1.5689, 0.0,    idrotm[342], "ONLY");
3553   gMC->Gspos("I026", 2,"I024",  1.8824,  -1.7349, 0.0,    idrotm[344], "ONLY");
3554
3555   gMC->Gspos("I029", 1,"I024", -0.087,    1.7067, iI029dits[2]-iI024dits[2], idrotm[342], "ONLY");
3556
3557   gMC->Gspos("I030", 1,"I024",  0.0958,   1.6914, iI030dits[2]-iI024dits[2], idrotm[343], "ONLY");
3558
3559   gMC->Gspos("I031", 1,"I024",  iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
3560   gMC->Gspos("I031", 2,"I024", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
3561
3562   gMC->Gspos("I032", 1,"I024",  iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
3563   gMC->Gspos("I032", 2,"I024", -iSDDCoolPipe[0], iSDDCoolPipe[1], iSDDCoolPipe[2], 0 ,"ONLY");
3564
3565
3566   xI424 = iI028dits[0]/3.;
3567   yI424 = -iI028dits[1]+iI424dits[1];
3568   gMC->Gspos("I422", 1,"I421", 0.0, 0.0, 0.0, 0, "ONLY");
3569   gMC->Gspos("I423", 1,"I421", 0.0, 0.0, iI421dits[2]-iI423dits[2], 0, "ONLY");
3570   gMC->Gspos("I421", 1,"I420", 0.0, 0.0, 0.0, idrotm[312], "ONLY");
3571   gMC->Gspos("I420", 1,"I028", -iI028dits[0]/3., iI028dits[1]-iI420dits[1], 0.0, 0, "ONLY");
3572   gMC->Gspos("I424", 1,"I028", xI424, yI424, 0.0, 0, "ONLY");
3573   gMC->Gspos("I028", 1,"I024", 0.0, iI028dits[1]-iI024dits[1], iI024dits[2]-iI028dits[2], 0, "ONLY");
3574
3575
3576   // -- build the SDD ladder 3
3577
3578   indI425 = 1;
3579   gMC->Gspos("I024", 1,"I047",  0.0,      0.0,   24.625, 0,           "ONLY");  
3580   gMC->Gspos("I018", 1,"I047",  0.0,      0.0,    3.65,  0,           "ONLY");
3581   gMC->Gspos("I018", 2,"I047",  0.0,      0.0,   10.95,  0,           "ONLY");
3582   gMC->Gspos("I018", 3,"I047",  0.0,      0.0,   18.25,  0,           "ONLY");
3583   gMC->Gspos("I018", 4,"I047",  0.0,      0.0,   -3.65,  0,           "ONLY");
3584   gMC->Gspos("I018", 5,"I047",  0.0,      0.0,  -10.95,  0,           "ONLY");
3585   gMC->Gspos("I018", 6,"I047",  0.0,      0.0,  -18.25,  0,           "ONLY");
3586   gMC->Gspos("I024", 2,"I047",  0.0,      0.0,  -24.625, idrotm[355], "ONLY");
3587   nameHV[0] = 'I';
3588   nameHV[1] = '3';
3589   nameHV[2] = '1';  
3590   nameHV[4] = '\0';
3591   for (iSDD=0; iSDD<3; iSDD++) {
3592     nameHV[3] = (Char_t)(48+iSDD+5);
3593     dits[0] = 1.350000;
3594     dits[1] = iI425dits[1];
3595     dits[2] = (iI047dits[2] - 2*iI024dits[2] - zSDDlay3[iSDD])/2.;
3596     gMC->Gsvolu(nameHV, "BOX ", idtmed[279], dits, 3);
3597     xHV = 0.0;
3598     yHV = -iI047dits[1] + (2*iSDD+1)*dits[1];
3599     zHV = iI047dits[2] - 2*iI024dits[2] - dits[2];
3600     gMC->Gspos(nameHV, 1,"I047", xHV, yHV,  zHV, 0, "ONLY");
3601     gMC->Gspos(nameHV, 2,"I047", xHV, yHV, -zHV, 0, "ONLY");
3602     gMC->Gspos("I425", indI425++,"I047",  xI424, yHV,   24.625, 0, "ONLY");
3603     gMC->Gspos("I425", indI425++,"I047", -xI424, yHV,  -24.625, 0, "ONLY");
3604   }
3605   nameLV[0] = 'I';
3606   nameLV[1] = '3';
3607   nameLV[2] = '1';  
3608   nameLV[4] = '\0';
3609   for (iSDD=0; iSDD<3; iSDD++) {
3610     nameLV[3] = (Char_t)(48+iSDD+1);
3611     dits[0] = 1.350000;
3612     dits[1] = 0.004423;
3613     dits[2] = (iI047dits[2] - (2*iSDD+1)*iI018dits[2] - iI039dits[2])/2.;
3614     gMC->Gsvolu(nameLV, "BOX ", idtmed[280], dits, 3);
3615     yLV = iI018dits[1] - dits[0]*cos30 - dits[1]*sin30;
3616     xLV = xI050 -
3617           TMath::Abs(yI050-yLV)*sin30/cos30 +
3618           (iI050dits[1]+(2*iSDD+1)*dits[1])/cos30;
3619     zLV = iI047dits[2] - dits[2];
3620     gMC->Gspos(nameLV, 1,"I047",  xLV, yLV,  zLV, idrotm[346], "ONLY");
3621     gMC->Gspos(nameLV, 2,"I047",  xLV, yLV, -zLV, idrotm[346], "ONLY");
3622     gMC->Gspos(nameLV, 3,"I047", -xLV, yLV,  zLV, idrotm[347], "ONLY");
3623     gMC->Gspos(nameLV, 4,"I047", -xLV, yLV, -zLV, idrotm[347], "ONLY");
3624   }
3625
3626
3627   // -- build the SDD ladder 4
3628
3629
3630   gMC->Gspos("I024", 3,"I048", -0.0001,   0.0,   31.925, 0,           "ONLY");
3631   gMC->Gspos("I018", 7,"I048", -0.0001,   0.0,   -3.65,  0,           "ONLY");
3632   gMC->Gspos("I018", 8,"I048", -0.0001,   0.0,    3.65,  0,           "ONLY");
3633   gMC->Gspos("I018", 9,"I048", -0.0001,   0.0,   10.95,  0,           "ONLY");
3634   gMC->Gspos("I018",10,"I048", -0.0001,   0.0,   18.25,  0,           "ONLY");
3635   gMC->Gspos("I018",11,"I048", -0.0001,   0.0,   25.55,  0,           "ONLY");
3636   gMC->Gspos("I018",12,"I048", -0.0001,   0.0,  -10.95,  0,           "ONLY");
3637   gMC->Gspos("I018",13,"I048", -0.0001,   0.0,  -18.25,  0,           "ONLY");
3638   gMC->Gspos("I018",14,"I048", -0.0001,   0.0,  -25.55,  0,           "ONLY");
3639   gMC->Gspos("I024", 4,"I048", -0.0001,   0.0,  -31.925, idrotm[355], "ONLY");
3640   nameHV[0] = 'I';
3641   nameHV[1] = '4';
3642   nameHV[2] = '1';  
3643   nameHV[4] = '\0';  
3644   for (iSDD=0; iSDD<4; iSDD++) {
3645     nameHV[3] = (Char_t)(48+iSDD+5);
3646     dits[0] = 1.350000;
3647     dits[1] = iI425dits[1];
3648     dits[2] = (iI048dits[2] - 2*iI024dits[2] - zSDDlay4[iSDD])/2.;
3649     gMC->Gsvolu(nameHV, "BOX ", idtmed[279], dits, 3);
3650     xHV = -0.0001;
3651     yHV = -iI048dits[1] + (2*iSDD+1)*dits[1];
3652     zHV = iI048dits[2] - 2*iI024dits[2] - dits[2];
3653     gMC->Gspos(nameHV, 1,"I048", xHV, yHV,  zHV, 0, "ONLY");
3654     gMC->Gspos(nameHV, 2,"I048", xHV, yHV, -zHV, 0, "ONLY");
3655     gMC->Gspos("I425", indI425++,"I048",  xI424, yHV,   31.925, 0, "ONLY");
3656     gMC->Gspos("I425", indI425++,"I048", -xI424, yHV,  -31.925, 0, "ONLY");
3657   }
3658   nameLV[0] = 'I';
3659   nameLV[1] = '4';
3660   nameLV[2] = '1';  
3661   nameLV[4] = '\0';
3662   for (iSDD=0; iSDD<4; iSDD++) {
3663     nameLV[3] = (Char_t)(48+iSDD+1);
3664     dits[0] = 1.350000;
3665     dits[1] = 0.004423;
3666     dits[2] = (iI048dits[2] - (2*iSDD+1)*iI018dits[2] - iI039dits[2])/2.;
3667     gMC->Gsvolu(nameLV, "BOX ", idtmed[280], dits, 3);
3668     yLV = iI018dits[1] - dits[0]*cos30 - dits[1]*sin30;
3669     xLV = xI050 -
3670           TMath::Abs(yI050-yLV)*sin30/cos30 +
3671           (iI050dits[1]+(2*iSDD+1)*dits[1])/cos30;
3672     zLV = iI048dits[2] - dits[2];
3673     gMC->Gspos(nameLV, 1,"I048",  xLV, yLV,  zLV, idrotm[346], "ONLY");
3674     gMC->Gspos(nameLV, 2,"I048",  xLV, yLV, -zLV, idrotm[346], "ONLY");
3675     gMC->Gspos(nameLV, 3,"I048", -xLV, yLV,  zLV, idrotm[347], "ONLY");
3676     gMC->Gspos(nameLV, 4,"I048", -xLV, yLV, -zLV, idrotm[347], "ONLY");
3677   }
3678
3679
3680   // -- build the SDD barrel (layers 3 and 4)
3681
3682   gMC->Gspos("I047", 1,"IT34", -3.7528,  16.4422, 0.0,   idrotm[321], "ONLY");
3683   gMC->Gspos("I047", 2,"IT34",-10.8892,  13.6547, 0.0,   idrotm[333], "ONLY");
3684   gMC->Gspos("I047", 3,"IT34",-15.1948,   7.3175, 0.0,   idrotm[336], "ONLY");
3685   gMC->Gspos("I047", 4,"IT34",-17.465,    0.0,    0.0,   idrotm[350], "ONLY");
3686   gMC->Gspos("I047", 5,"IT34",-15.1948,  -7.3174, 0.0,   idrotm[313], "ONLY");
3687   gMC->Gspos("I047", 6,"IT34",-10.8893, -13.6547, 0.0,   idrotm[311], "ONLY");
3688   gMC->Gspos("I047", 7,"IT34", -3.7528, -16.4422, 0.0,   idrotm[310], "ONLY");
3689   gMC->Gspos("I047", 8,"IT34",  3.8863, -17.0271, 0.0,   idrotm[386], "ONLY");
3690   gMC->Gspos("I047", 9,"IT34", 10.5152, -13.1856, 0.0,   idrotm[309], "ONLY");
3691   gMC->Gspos("I047",10,"IT34", 15.7354,  -7.5778, 0.0,   idrotm[308], "ONLY");
3692   gMC->Gspos("I047",11,"IT34", 16.865,    0.0,    0.0,   idrotm[356], "ONLY");
3693   gMC->Gspos("I047",12,"IT34", 15.7354,   7.5778, 0.0,   idrotm[307], "ONLY");
3694   gMC->Gspos("I047",13,"IT34", 10.5152,  13.1856, 0.0,   idrotm[306], "ONLY");
3695   gMC->Gspos("I047",14,"IT34",  3.8863,  17.0271, 0.0,   idrotm[305], "ONLY");
3696
3697   gMC->Gspos("I048", 1,"IT34", -3.6667,  25.5027, 0.0,   idrotm[335], "ONLY");
3698   gMC->Gspos("I048", 2,"IT34",-10.9317,  23.937,  0.0,   idrotm[332], "ONLY");
3699   gMC->Gspos("I048", 3,"IT34",-16.8725,  19.4719, 0.0,   idrotm[331], "ONLY");
3700   gMC->Gspos("I048", 4,"IT34",-22.1376,  14.227,  0.0,   idrotm[366], "ONLY");
3701   gMC->Gspos("I048", 5,"IT34",-24.7213,   7.2588, 0.0,   idrotm[330], "ONLY");
3702   gMC->Gspos("I048", 6,"IT34",-26.315,    0.0,    0.0,   idrotm[350], "ONLY");
3703   gMC->Gspos("I048", 7,"IT34",-24.7213,  -7.2588, 0.0,   idrotm[329], "ONLY");
3704   gMC->Gspos("I048", 8,"IT34",-22.1376, -14.227,  0.0,   idrotm[328], "ONLY");
3705   gMC->Gspos("I048", 9,"IT34",-16.8725, -19.4719, 0.0,   idrotm[327], "ONLY");
3706   gMC->Gspos("I048",10,"IT34",-10.9316, -23.937,  0.0,   idrotm[326], "ONLY");
3707   gMC->Gspos("I048",11,"IT34", -3.6667, -25.5027, 0.0,   idrotm[325], "ONLY");
3708   gMC->Gspos("I048",12,"IT34",  3.745,  -26.0472, 0.0,   idrotm[324], "ONLY");
3709   gMC->Gspos("I048",13,"IT34", 10.7032, -23.4367, 0.0,   idrotm[323], "ONLY");
3710   gMC->Gspos("I048",14,"IT34", 17.2327, -19.8876, 0.0,   idrotm[322], "ONLY");
3711   gMC->Gspos("I048",15,"IT34", 21.6749, -13.9296, 0.0,   idrotm[320], "ONLY");
3712   gMC->Gspos("I048",16,"IT34", 25.2491,  -7.4138, 0.0,   idrotm[319], "ONLY");
3713   gMC->Gspos("I048",17,"IT34", 25.765,    0.0,    0.0,   idrotm[318], "ONLY");
3714   gMC->Gspos("I048",18,"IT34", 25.2491,   7.4138, 0.0,   idrotm[317], "ONLY");
3715   gMC->Gspos("I048",19,"IT34", 21.6749,  13.9296, 0.0,   idrotm[316], "ONLY");
3716   gMC->Gspos("I048",20,"IT34", 17.2327,  19.8876, 0.0,   idrotm[315], "ONLY");
3717   gMC->Gspos("I048",21,"IT34", 10.7032,  23.4367, 0.0,   idrotm[314], "ONLY");
3718   gMC->Gspos("I048",22,"IT34", 3.745,    26.0472, 0.0,   idrotm[334], "ONLY");
3719   }
3720   
3721   // --- Place SSD volumes into their mother volume IT56  
3722
3723   if (! AliITSInitGeometry::SSDIsTGeoNative()) {
3724
3725   gMC->Gspos("I570",14,"IT56",-28.0681,-36.0619,-0.27,idrotm[566],"ONLY"); 
3726   gMC->Gspos("I570",15,"IT56",-21.677,-40.0556,-0.27,idrotm[567],"ONLY");
3727   gMC->Gspos("I570",16,"IT56",-14.838,-43.2217,-0.27,idrotm[568],"ONLY");
3728   gMC->Gspos("I570",17,"IT56",-7.4965,-44.9238,-0.27,idrotm[569],"ONLY");
3729   gMC->Gspos("I570",18,"IT56",-0.27,-45.6977,-0.27,idrotm[533],"ONLY");
3730   gMC->Gspos("I570",19,"IT56",7.4965,-44.9238,-0.27,idrotm[534],"ONLY");
3731   gMC->Gspos("I570",20,"IT56",14.838,-43.2217,-0.27,idrotm[535],"ONLY");
3732   gMC->Gspos("I570",21,"IT56",21.677,-40.0556,-0.27,idrotm[623],"ONLY");
3733   gMC->Gspos("I570",22,"IT56",28.0681,-36.0619,-0.27,idrotm[537],"ONLY");
3734   gMC->Gspos("I570",23,"IT56",33.5085,-30.8468,-0.27,idrotm[538],"ONLY");
3735   gMC->Gspos("I570",24,"IT56",38.2566,-24.9943,-0.27,idrotm[539],"ONLY");
3736   gMC->Gspos("I570",25,"IT56",41.7089,-18.2952,-0.27,idrotm[540],"ONLY");
3737   gMC->Gspos("I570",26,"IT56",44.2994,-11.2181,-0.27,idrotm[541],"ONLY");
3738   gMC->Gspos("I570",27,"IT56",45.3894,-3.7611,-0.27,idrotm[542],"ONLY");
3739   gMC->Gspos("I570",28,"IT56",45.5416,3.7737,-0.27,idrotm[543],"ONLY");
3740   gMC->Gspos("I570",29,"IT56",44.1513,11.1806,-0.27,idrotm[544],"ONLY");
3741   gMC->Gspos("I570",30,"IT56",41.8487,18.3566,-0.27,idrotm[545],"ONLY");
3742   gMC->Gspos("I570",31,"IT56",38.1287,24.9107,-0.27,idrotm[546],"ONLY");
3743   gMC->Gspos("I570",32,"IT56",33.6209,30.9502,-0.27,idrotm[547],"ONLY");
3744   gMC->Gspos("I570",33,"IT56",27.9743,35.9414,-0.27,idrotm[548],"ONLY");
3745   gMC->Gspos("I570",34,"IT56",21.7497,40.1899,-0.27,idrotm[549],"ONLY");
3746   gMC->Gspos("I570",35,"IT56",14.7884,43.0772,-0.27,idrotm[550],"ONLY");
3747   gMC->Gspos("I570",36,"IT56",7.5216,45.0744,-0.27,idrotm[551],"ONLY");
3748   gMC->Gspos("I570",37,"IT56",0.00,45.545,-0.27,0,"ONLY");
3749   gMC->Gspos("I570",38,"IT56",-7.5216,45.0744,-0.27,idrotm[552],"ONLY");
3750   gMC->Gspos("I570",1,"IT56",-14.7884,43.0772,-0.27,idrotm[553],"ONLY");
3751   gMC->Gspos("I570",2,"IT56",-21.7497,40.1899,-0.27,idrotm[620],"ONLY");
3752   gMC->Gspos("I570",3,"IT56",-27.9743,35.9414,-0.27,idrotm[555],"ONLY");
3753   gMC->Gspos("I570",4,"IT56",-33.6209,30.9502,-0.27,idrotm[556],"ONLY");
3754   gMC->Gspos("I570",5,"IT56",-38.1287,24.9108,-0.27,idrotm[557],"ONLY");
3755   gMC->Gspos("I570",6,"IT56",-41.8487,18.3566,-0.27,idrotm[558],"ONLY");
3756   gMC->Gspos("I570",7,"IT56",-44.1513,11.1806,-0.27,idrotm[559],"ONLY");
3757   gMC->Gspos("I570",8,"IT56",-45.5416,3.7737,-0.27,idrotm[560],"ONLY");
3758   gMC->Gspos("I570",9,"IT56",-45.3894,-3.7611,-0.27,idrotm[561],"ONLY");
3759   gMC->Gspos("I570",10,"IT56",-44.2994,-11.2181,-0.27,idrotm[562],"ONLY");
3760   gMC->Gspos("I570",11,"IT56",-41.7089,-18.2952,-0.27,idrotm[563],"ONLY");
3761   gMC->Gspos("I570",12,"IT56",-38.2566,-24.9943,-0.27,idrotm[564],"ONLY");
3762   gMC->Gspos("I570",13,"IT56",-33.5086,-30.8468,-0.27,idrotm[565],"ONLY");
3763   gMC->Gspos("I569",8,"IT56",-43.5484,3.6085,0.0,idrotm[560],"ONLY");
3764   gMC->Gspos("I569",9,"IT56",-43.3963,-3.5959,0.0,idrotm[561],"ONLY");
3765   gMC->Gspos("I569",10,"IT56",-42.3606,-10.7271,0.0,idrotm[562],"ONLY");
3766   gMC->Gspos("I569",11,"IT56",-39.8773,-17.4918,0.0,idrotm[563],"ONLY");
3767   gMC->Gspos("I569",12,"IT56",-36.5823,-23.9004,0.0,idrotm[564],"ONLY");
3768   gMC->Gspos("I569",13,"IT56",-32.0371,-29.4922,0.0,idrotm[565],"ONLY");
3769   gMC->Gspos("I569",14,"IT56",-26.8397,-34.4836,0.0,idrotm[566],"ONLY");
3770   gMC->Gspos("I569",15,"IT56",-20.7251,-38.2967,0.0,idrotm[567],"ONLY");
3771   gMC->Gspos("I569",16,"IT56",-14.1886,-41.33,0.0,idrotm[568],"ONLY");
3772   gMC->Gspos("I569",17,"IT56",-7.1673,-42.9511,0.0,idrotm[569],"ONLY");
3773   gMC->Gspos("I569",18,"IT56",0.0,-43.6977,0.0,idrotm[533],"ONLY");
3774   gMC->Gspos("I569",19,"IT56",7.1673,-42.9511,0.0,idrotm[534],"ONLY");
3775   gMC->Gspos("I569",20,"IT56",14.1886,-41.33,0.0,idrotm[535],"ONLY");
3776   gMC->Gspos("I569",21,"IT56",20.7251,-38.2967,0.0,idrotm[623],"ONLY");
3777   gMC->Gspos("I569",22,"IT56",26.8397,-34.4836,0.0,idrotm[537],"ONLY");
3778   gMC->Gspos("I569",23,"IT56",32.0371,-29.4922,0.0,idrotm[538],"ONLY");
3779   gMC->Gspos("I569",24,"IT56",36.5822,-23.9004,0.0,idrotm[539],"ONLY");
3780   gMC->Gspos("I569",25,"IT56",39.8773,-17.4918,0.0,idrotm[540],"ONLY");
3781   gMC->Gspos("I569",26,"IT56",42.3606,-10.7272,0.0,idrotm[541],"ONLY");
3782   gMC->Gspos("I569",27,"IT56",43.3963,-3.5959,0.0,idrotm[542],"ONLY");
3783   gMC->Gspos("I569",28,"IT56",43.5484,3.6085,0.0,idrotm[543],"ONLY");
3784   gMC->Gspos("I569",29,"IT56",42.2125,10.6897,0.0,idrotm[544],"ONLY");
3785   gMC->Gspos("I569",30,"IT56",40.0172,17.5532,0.0,idrotm[545],"ONLY");
3786   gMC->Gspos("I569",31,"IT56",36.4544,23.8169,0.0,idrotm[546],"ONLY");
3787   gMC->Gspos("I569",32,"IT56",32.1494,29.5956,0.0,idrotm[547],"ONLY");
3788   gMC->Gspos("I569",33,"IT56",26.7459,34.3631,0.0,idrotm[548],"ONLY");
3789   gMC->Gspos("I569",34,"IT56",20.7978,38.431,0.0,idrotm[549],"ONLY");
3790   gMC->Gspos("I569",35,"IT56",14.139,41.1856,0.0,idrotm[550],"ONLY");
3791   gMC->Gspos("I569",36,"IT56",7.1924,43.1017,0.0,idrotm[551],"ONLY");
3792   gMC->Gspos("I569",37,"IT56",0.0,43.545,0.0,0,"ONLY");
3793   gMC->Gspos("I569",38,"IT56",-7.1924,43.1017,0.0,idrotm[552],"ONLY");
3794   gMC->Gspos("I569",1,"IT56",-14.139,41.1856,0.0,idrotm[553],"ONLY");
3795   gMC->Gspos("I569",2,"IT56",-20.7978,38.431,0.0,idrotm[620],"ONLY");
3796   gMC->Gspos("I569",3,"IT56",-26.7459,34.3631,0.0,idrotm[555],"ONLY");
3797   gMC->Gspos("I569",4,"IT56",-32.1494,29.5956,0.0,idrotm[556],"ONLY");
3798   gMC->Gspos("I569",5,"IT56",-36.4544,23.8169,0.0,idrotm[557],"ONLY");
3799   gMC->Gspos("I569",6,"IT56",-40.0172,17.5532,0.0,idrotm[558],"ONLY");
3800   gMC->Gspos("I569",7,"IT56",-42.2125,10.6897,0.0,idrotm[559],"ONLY");
3801   gMC->Gspos("I571",15,"IT56",-21.2916,-34.387,0.0,idrotm[501],"ONLY");
3802   gMC->Gspos("I571",14,"IT56",-27.351,-30.0026,0.0,idrotm[503],"ONLY");
3803   gMC->Gspos("I571",13,"IT56",-32.2758,-24.3735,0.0,idrotm[504],"ONLY");
3804   gMC->Gspos("I571",12,"IT56",-36.3422,-18.0963,0.0,idrotm[505],"ONLY");
3805   gMC->Gspos("I571",11,"IT56",-38.901,-11.0683,0.0,idrotm[506],"ONLY");
3806   gMC->Gspos("I571",10,"IT56",-40.4252,-3.7459,0.0,idrotm[507],"ONLY");
3807   gMC->Gspos("I571",9,"IT56",-40.2725,3.7318,0.0,idrotm[508],"ONLY");
3808   gMC->Gspos("I571",8,"IT56",-39.0486,11.1103,0.0,idrotm[509],"ONLY");
3809   gMC->Gspos("I571",7,"IT56",-36.2049,18.0279,0.0,idrotm[510],"ONLY");
3810   gMC->Gspos("I571",6,"IT56",-32.3982,24.466,0.0,idrotm[511],"ONLY");
3811   gMC->Gspos("I571",5,"IT56",-27.2476,29.8892,0.0,idrotm[512],"ONLY");
3812   gMC->Gspos("I571",4,"IT56",-21.3723,34.5175,0.0,idrotm[513],"ONLY");
3813   gMC->Gspos("I571",3,"IT56",-14.6104,37.7138,0.0,idrotm[653],"ONLY");
3814   gMC->Gspos("I571",2,"IT56",-7.4599,39.9072,0.0,idrotm[514],"ONLY");
3815   gMC->Gspos("I571",1,"IT56",0.0,40.445,0.0,0,"ONLY");
3816   gMC->Gspos("I571",34,"IT56",7.46,39.9071,0.0,idrotm[515],"ONLY");
3817   gMC->Gspos("I571",33,"IT56",14.6104,37.7138,0.0,idrotm[516],"ONLY");
3818   gMC->Gspos("I571",32,"IT56",21.3723,34.5175,0.0,idrotm[517],"ONLY");
3819   gMC->Gspos("I571",31,"IT56",27.2476,29.8892,0.0,idrotm[518],"ONLY");
3820   gMC->Gspos("I571",30,"IT56",32.3983,24.466,0.0,idrotm[519],"ONLY");
3821   gMC->Gspos("I571",29,"IT56",36.2049,18.0279,0.0,idrotm[520],"ONLY");
3822   gMC->Gspos("I571",28,"IT56",39.0486,11.1103,0.0,idrotm[521],"ONLY");
3823   gMC->Gspos("I571",27,"IT56",40.2725,3.7318,0.0,idrotm[522],"ONLY");
3824   gMC->Gspos("I571",26,"IT56",40.4252,-3.746,0.0,idrotm[523],"ONLY");
3825   gMC->Gspos("I571",25,"IT56",38.901,-11.0683,0.0,idrotm[524],"ONLY");
3826   gMC->Gspos("I571",24,"IT56",36.3422,-18.0963,0.0,idrotm[525],"ONLY");
3827   gMC->Gspos("I571",23,"IT56",32.2758,-24.3736,0.0,idrotm[526],"ONLY");
3828   gMC->Gspos("I571",22,"IT56",27.351,-30.0026,0.0,idrotm[527],"ONLY");
3829   gMC->Gspos("I571",21,"IT56",21.2915,-34.387,0.0,idrotm[528],"ONLY");
3830   gMC->Gspos("I571",20,"IT56",14.6658,-37.8569,0.0,idrotm[618],"ONLY");
3831   gMC->Gspos("I571",19,"IT56",7.4317,-39.7563,0.0,idrotm[529],"ONLY");
3832   gMC->Gspos("I571",18,"IT56",0.0,-40.5984,0.0,idrotm[533],"ONLY");
3833   gMC->Gspos("I571",17,"IT56",-7.4318,-39.7563,0.0,idrotm[530],"ONLY");
3834   gMC->Gspos("I571",16,"IT56",-14.6659,-37.8569,0.0,idrotm[531],"ONLY");
3835   gMC->Gspos("I565",13,"IT56",-30.6798,-23.1683,0.0,idrotm[504],"ONLY");
3836   gMC->Gspos("I565",12,"IT56",-34.5519,-17.2048,0.0,idrotm[505],"ONLY");
3837   gMC->Gspos("I565",11,"IT56",-36.9774,-10.521,0.0,idrotm[506],"ONLY");
3838   gMC->Gspos("I565",10,"IT56",-38.4338,-3.5614,0.0,idrotm[507],"ONLY");
3839   gMC->Gspos("I565",9,"IT56",-38.281,3.5473,0.0,idrotm[508],"ONLY");
3840   gMC->Gspos("I565",8,"IT56",-37.1249,10.563,0.0,idrotm[509],"ONLY");
3841   gMC->Gspos("I565",7,"IT56",-34.4146,17.1364,0.0,idrotm[510],"ONLY");
3842   gMC->Gspos("I565",6,"IT56",-30.8022,23.2608,0.0,idrotm[511],"ONLY");
3843   gMC->Gspos("I565",5,"IT56",-25.9002,28.4112,0.0,idrotm[512],"ONLY");
3844   gMC->Gspos("I565",4,"IT56",-20.3195,32.817,0.0,idrotm[513],"ONLY");
3845   gMC->Gspos("I565",3,"IT56",-13.8879,35.8489,0.0,idrotm[653],"ONLY");
3846   gMC->Gspos("I565",2,"IT56",-7.0924,37.9412,0.0,idrotm[514],"ONLY");
3847   gMC->Gspos("I565",1,"IT56",0.0,38.445,0.0,0,"ONLY");
3848   gMC->Gspos("I565",34,"IT56",7.0925,37.9412,0.0,idrotm[515],"ONLY");
3849   gMC->Gspos("I565",33,"IT56",13.888,35.8489,0.0,idrotm[516],"ONLY");
3850   gMC->Gspos("I565",32,"IT56",20.3195,32.817,0.0,idrotm[517],"ONLY");
3851   gMC->Gspos("I565",31,"IT56",25.9002,28.4112,0.0,idrotm[518],"ONLY");
3852   gMC->Gspos("I565",30,"IT56",30.8022,23.2607,0.0,idrotm[519],"ONLY");
3853   gMC->Gspos("I565",29,"IT56",34.4146,17.1364,0.0,idrotm[520],"ONLY");
3854   gMC->Gspos("I565",28,"IT56",37.125,10.5629,0.0,idrotm[521],"ONLY");
3855   gMC->Gspos("I565",27,"IT56",38.281,3.5472,0.0,idrotm[522],"ONLY");
3856   gMC->Gspos("I565",26,"IT56",38.4338,-3.5614,0.0,idrotm[523],"ONLY");
3857   gMC->Gspos("I565",25,"IT56",36.9774,-10.521,0.0,idrotm[524],"ONLY");
3858   gMC->Gspos("I565",24,"IT56",34.5519,-17.2048,0.0,idrotm[525],"ONLY");
3859   gMC->Gspos("I565",23,"IT56",30.6798,-23.1683,0.0,idrotm[526],"ONLY");
3860   gMC->Gspos("I565",22,"IT56",26.0036,-28.5246,0.0,idrotm[527],"ONLY");
3861   gMC->Gspos("I565",21,"IT56",20.2387,-32.6866,0.0,idrotm[528],"ONLY");
3862   gMC->Gspos("I565",20,"IT56",13.9433,-35.992,0.0,idrotm[618],"ONLY");
3863   gMC->Gspos("I565",19,"IT56",7.0642,-37.7904,0.0,idrotm[529],"ONLY");
3864   gMC->Gspos("I565",18,"IT56",0.0,-38.5984,0.0,idrotm[533],"ONLY");
3865   gMC->Gspos("I565",17,"IT56",-7.0643,-37.7904,0.0,idrotm[530],"ONLY");
3866   gMC->Gspos("I565",16,"IT56",-13.9434,-35.992,0.0,idrotm[531],"ONLY");
3867   gMC->Gspos("I565",15,"IT56",-20.2387,-32.6866,0.0,idrotm[501],"ONLY");
3868   gMC->Gspos("I565",14,"IT56",-26.0036,-28.5246,0.0,idrotm[503],"ONLY");
3869   gMC->Gspos("I553",1,"I570",0.005,0.0,52.8453,0,"ONLY");
3870   gMC->Gspos("I523",1,"I570",0.0,0.0,46.9203+0.82,0,"ONLY");
3871   gMC->Gspos("I523",2,"I570",0.0,0.0,43.0103+0.82,0,"ONLY");
3872   gMC->Gspos("I523",3,"I570",0.0,0.0,39.1003+0.82,0,"ONLY");
3873   gMC->Gspos("I523",4,"I570",0.0,0.0,35.1903+0.82,0,"ONLY");
3874   gMC->Gspos("I523",5,"I570",0.0,0.0,31.2803+0.82,0,"ONLY");
3875   gMC->Gspos("I523",6,"I570",0.0,0.0,27.3703+0.82,0,"ONLY");
3876   gMC->Gspos("I523",7,"I570",0.0,0.0,23.4603+0.82,0,"ONLY");
3877   gMC->Gspos("I523",8,"I570",0.0,0.0,19.5503+0.82,0,"ONLY");
3878   gMC->Gspos("I523",9,"I570",0.0,0.0,15.6403+0.82,0,"ONLY");
3879   gMC->Gspos("I523",10,"I570",0.0,0.0,11.7303+0.82,0,"ONLY");
3880   gMC->Gspos("I523",11,"I570",0.0,0.0,7.8203+0.82,0,"ONLY");
3881   gMC->Gspos("I523",12,"I570",0.0,0.0,3.9103+0.82,0,"ONLY");
3882   gMC->Gspos("I523",13,"I570",0.0,0.0,0.0003+0.82,0,"ONLY");
3883   gMC->Gspos("I523",14,"I570",0.0,0.0,-3.9097+0.82,0,"ONLY");
3884   gMC->Gspos("I523",15,"I570",0.0,0.0,-7.8197+0.82,0,"ONLY");
3885   gMC->Gspos("I523",16,"I570",0.0,0.0,-11.7297+0.82,0,"ONLY");
3886   gMC->Gspos("I523",17,"I570",0.0,0.0,-15.6397+0.82,0,"ONLY");
3887   gMC->Gspos("I523",18,"I570",0.0,0.0,-19.5497+0.82,0,"ONLY");
3888   gMC->Gspos("I523",19,"I570",0.0,0.0,-23.4597+0.82,0,"ONLY");
3889   gMC->Gspos("I523",20,"I570",0.0,0.0,-27.3697+0.82,0,"ONLY");
3890   gMC->Gspos("I523",21,"I570",0.0,0.0,-31.2797+0.82,0,"ONLY");
3891   gMC->Gspos("I523",22,"I570",0.0,0.0,-35.1897+0.82,0,"ONLY");
3892   gMC->Gspos("I523",23,"I570",0.0,0.0,-39.0997+0.82,0,"ONLY");
3893   gMC->Gspos("I523",24,"I570",0.0,0.0,-43.0097+0.82,0,"ONLY");
3894   gMC->Gspos("I523",25,"I570",0.0,0.0,-46.9197+0.82,0,"ONLY");
3895   gMC->Gspos("I553",2,"I570",-0.005,0.0,-51.2047,idrotm[570],"ONLY");
3896   gMC->Gspos("I566",1,"I569",0.0,-0.03,46.9203,idrotm[532],"ONLY");
3897   gMC->Gspos("I566",2,"I569",0.0,0.03,43.0103,0,"ONLY");
3898   gMC->Gspos("I566",3,"I569",0.0,-0.03,39.1003,idrotm[532],"ONLY");
3899   gMC->Gspos("I566",4,"I569",0.0,0.03,35.1903,0,"ONLY");
3900   gMC->Gspos("I566",5,"I569",0.0,-0.03,31.2803,idrotm[532],"ONLY");
3901   gMC->Gspos("I566",6,"I569",0.0,0.03,27.3703,0,"ONLY");
3902   gMC->Gspos("I566",7,"I569",0.0,-0.03,23.4603,idrotm[532],"ONLY");
3903   gMC->Gspos("I566",8,"I569",0.0,0.03,19.5503,0,"ONLY");
3904   gMC->Gspos("I566",9,"I569",0.0,-0.03,15.6403,idrotm[532],"ONLY");
3905   gMC->Gspos("I566",10,"I569",0.0,0.03,11.7303,0,"ONLY");
3906   gMC->Gspos("I566",11,"I569",0.0,-0.03,7.8203,idrotm[532],"ONLY");
3907   gMC->Gspos("I566",12,"I569",0.0,0.03,3.9103,0,"ONLY");
3908   gMC->Gspos("I566",13,"I569",0.0,-0.03,0.0003,0,"ONLY");
3909   gMC->Gspos("I566",14,"I569",0.0,0.03,-3.9097,0,"ONLY");
3910   gMC->Gspos("I566",15,"I569",0.0,-0.03,-7.8197,idrotm[532],"ONLY");
3911   gMC->Gspos("I566",16,"I569",0.0,0.03,-11.7297,0,"ONLY");
3912   gMC->Gspos("I566",17,"I569",0.0,-0.03,-15.6397,0,"ONLY");
3913   gMC->Gspos("I566",18,"I569",0.0,0.03,-19.5497,0,"ONLY");
3914   gMC->Gspos("I566",19,"I569",0.0,-0.03,-23.4597,idrotm[532],"ONLY");
3915   gMC->Gspos("I566",20,"I569",0.0,0.03,-27.3697,0,"ONLY");
3916   gMC->Gspos("I566",21,"I569",0.0,-0.03,-31.2797,idrotm[532],"ONLY");
3917   gMC->Gspos("I566",22,"I569",0.0,0.03,-35.1897,0,"ONLY");
3918   gMC->Gspos("I566",23,"I569",0.0,-0.03,-39.0997,0,"ONLY");
3919   gMC->Gspos("I566",24,"I569",0.0,0.03,-43.0097,0,"ONLY");
3920   gMC->Gspos("I566",25,"I569",0.0,-0.03,-46.9197,idrotm[532],"ONLY");
3921   gMC->Gspos("I544",1,"I571",0.0101,0.0,43.125,0,"ONLY");
3922   gMC->Gspos("I516",20,"I571",0.0001,0.0,39.1-1.08,0,"ONLY");
3923   gMC->Gspos("I516",19,"I571",0.0001,0.0,35.19-1.08,0,"ONLY");
3924   gMC->Gspos("I516",18,"I571",0.0001,0.0,31.28-1.08,0,"ONLY");
3925   gMC->Gspos("I516",17,"I571",0.0001,0.0,27.37-1.08,0,"ONLY");
3926   gMC->Gspos("I516",16,"I571",0.0001,0.0,23.46-1.08,0,"ONLY");
3927   gMC->Gspos("I516",15,"I571",0.0001,0.0,19.55-1.08,0,"ONLY");
3928   gMC->Gspos("I516",14,"I571",0.0001,0.0,15.64-1.08,0,"ONLY");
3929   gMC->Gspos("I516",13,"I571",0.0001,0.0,11.73-1.08,0,"ONLY");
3930   gMC->Gspos("I516",12,"I571",0.0001,0.0,7.82-1.08,0,"ONLY");
3931   gMC->Gspos("I516",11,"I571",0.0001,0.0,3.91-1.08,0,"ONLY");
3932   gMC->Gspos("I516",10,"I571",0.0001,0.0,0.0-1.08,0,"ONLY");
3933   gMC->Gspos("I516",9,"I571",0.0001,0.0,-3.91-1.08,0,"ONLY");
3934   gMC->Gspos("I516",8,"I571",0.0001,0.0,-7.82-1.08,0,"ONLY");
3935   gMC->Gspos("I516",7,"I571",0.0001,0.0,-11.73-1.08,0,"ONLY");
3936   gMC->Gspos("I516",6,"I571",0.0001,0.0,-15.64-1.08,0,"ONLY");
3937   gMC->Gspos("I516",5,"I571",0.0001,0.0,-19.55-1.08,0,"ONLY");
3938   gMC->Gspos("I516",4,"I571",0.0001,0.0,-23.46-1.08,0,"ONLY");
3939   gMC->Gspos("I516",3,"I571",0.0001,0.0,-27.37-1.08,0,"ONLY");
3940   gMC->Gspos("I516",2,"I571",0.0001,0.0,-31.28-1.08,0,"ONLY");
3941   gMC->Gspos("I516",1,"I571",0.0001,0.0,-35.19-1.08,0,"ONLY");
3942   gMC->Gspos("I544",2,"I571",-0.0099,0.0,-41.375,idrotm[570],"ONLY");
3943   gMC->Gspos("I562",1,"I565",0.0,0.03,41.1546,0,"ONLY");
3944   gMC->Gspos("I562",2,"I565",0.0,-0.03,37.2246,0,"ONLY");
3945   gMC->Gspos("I562",3,"I565",0.0,0.03,33.3146,0,"ONLY");
3946   gMC->Gspos("I562",4,"I565",0.0,-0.03,29.3846,0,"ONLY");
3947   gMC->Gspos("I562",5,"I565",0.0,0.03,25.4746,0,"ONLY");
3948   gMC->Gspos("I562",6,"I565",0.0,-0.03,21.5446,0,"ONLY");
3949   gMC->Gspos("I562",7,"I565",0.0,0.03,17.6346,0,"ONLY");
3950   gMC->Gspos("I562",8,"I565",0.0,-0.03,13.7046,0,"ONLY");
3951   gMC->Gspos("I562",9,"I565",0.0,0.03,9.7946,0,"ONLY");
3952   gMC->Gspos("I562",10,"I565",0.0,-0.03,5.8645,0,"ONLY");
3953   gMC->Gspos("I562",11,"I565",0.0,0.03,1.9546,0,"ONLY");
3954   gMC->Gspos("I562",12,"I565",0.0,-0.03,-1.9754,0,"ONLY");
3955   gMC->Gspos("I562",13,"I565",0.0,0.03,-5.8855,0,"ONLY");
3956   gMC->Gspos("I562",14,"I565",0.0,-0.03,-9.8154,0,"ONLY");
3957   gMC->Gspos("I562",15,"I565",0.0,0.03,-13.7254,0,"ONLY");
3958   gMC->Gspos("I562",16,"I565",0.0,-0.03,-17.6555,0,"ONLY");
3959   gMC->Gspos("I562",17,"I565",0.0,0.03,-21.5655,0,"ONLY");
3960   gMC->Gspos("I562",18,"I565",0.0,-0.03,-25.4954,0,"ONLY");
3961   gMC->Gspos("I562",19,"I565",0.0,0.03,-29.4054,0,"ONLY");
3962   gMC->Gspos("I562",20,"I565",0.0,-0.03,-33.3354,0,"ONLY");
3963   gMC->Gspos("I562",21,"I565",0.0,0.03,-37.2454,0,"ONLY");
3964   gMC->Gspos("I562",22,"I565",0.0,-0.03,-41.1554,0,"ONLY");
3965   gMC->Gspos("I559",1,"I553",2.25,-1.615,0.0,0,"ONLY");
3966   gMC->Gspos("I560",1,"I553",2.25,-1.615,0.0,0,"ONLY");
3967   gMC->Gspos("I560",2,"I553",-2.25,-1.615,0.0,idrotm[573],"ONLY");
3968   gMC->Gspos("I558",1,"I553",-1.7167,-1.52,0.0,idrotm[583],"ONLY");
3969   gMC->Gspos("I557",1,"I553",-1.8533,-1.341,0.0,idrotm[581],"ONLY");
3970   gMC->Gspos("I558",2,"I553",1.8367,-1.3122,0.0,idrotm[575],"ONLY");
3971   gMC->Gspos("I557",2,"I553",1.75,-1.52,0.0,idrotm[583],"ONLY");
3972   gMC->Gspos("I558",3,"I553",-0.12,1.6613,0.0,idrotm[581],"ONLY");
3973   gMC->Gspos("I557",3,"I553",0.1034,1.6901,0.0,idrotm[575],"ONLY");
3974   gMC->Gspos("I556",3,"I553",-1.031,0.2033,-2.203,idrotm[580],"ONLY");
3975   gMC->Gspos("I556",1,"I553",1.0311,0.2033,-0.287,idrotm[576],"ONLY");
3976   gMC->Gspos("I554",1,"I553",0.0,-1.58,0.71,0,"ONLY");
3977   gMC->Gspos("I555",1,"I553",-0.0072,-1.58,-1.2311,idrotm[633],"ONLY");
3978   gMC->Gspos("I556",2,"I553",1.0311,0.2033,-2.203,idrotm[577],"ONLY");
3979   gMC->Gspos("I556",4,"I553",-1.031,0.2033,-0.287,idrotm[579],"ONLY");
3980   gMC->Gspos("I559",2,"I553",-2.25,-1.615,0.0,idrotm[573],"ONLY");
3981
3982   gMC->Gspos("I561",1,"I553",2.1,-1.615,-0.24,0,"ONLY");
3983   gMC->Gspos("I561",2,"I553",-2.1,-1.615,-0.24,idrotm[573],"ONLY");
3984
3985   gMC->Gspos("I519",37,"I523",0.0001,-1.79,-0.99,idrotm[586],"ONLY");
3986   gMC->Gspos("I519",36,"I523",-3.2986,-1.79,-1.2943,0,"ONLY");
3987   gMC->Gspos("I519",35,"I523",-3.2986,-1.71,-1.2943,0,"ONLY");
3988   gMC->Gspos("I519",34,"I523",-3.2286,-1.71,-1.2943,0,"ONLY");
3989   gMC->Gspos("I519",33,"I523",-3.2286,-1.79,-1.2943,0,"ONLY");
3990   gMC->Gspos("I519",32,"I523",-3.1586,-1.79,-1.2943,0,"ONLY");
3991   gMC->Gspos("I519",31,"I523",-3.1586,-1.71,-1.2943,0,"ONLY");
3992   gMC->Gspos("I519",30,"I523",-1.3436,-1.71,-1.2943,0,"ONLY");
3993   gMC->Gspos("I519",29,"I523",-1.3436,-1.79,-1.2943,0,"ONLY");
3994   gMC->Gspos("I519",28,"I523",-1.2736,-1.79,-1.2943,0,"ONLY");
3995   gMC->Gspos("I519",27,"I523",-1.2736,-1.71,-1.2943,0,"ONLY");
3996   gMC->Gspos("I519",26,"I523",-1.2036,-1.71,-1.2943,0,"ONLY");
3997   gMC->Gspos("I519",25,"I523",-1.2036,-1.79,-1.2943,0,"ONLY");
3998   gMC->Gspos("I519",24,"I523",-1.0458,-1.79,-1.2943,0,"ONLY");
3999   gMC->Gspos("I519",23,"I523",-1.0458,-1.71,-1.2943,0,"ONLY");
4000   gMC->Gspos("I519",22,"I523",-0.9758,-1.71,-1.2943,0,"ONLY");
4001   gMC->Gspos("I519",21,"I523",-0.9758,-1.79,-1.2943,0,"ONLY");
4002   gMC->Gspos("I519",20,"I523",-0.9058,-1.79,-1.2943,0,"ONLY");
4003   gMC->Gspos("I519",19,"I523",-0.9058,-1.71,-1.2943,0,"ONLY");
4004   gMC->Gspos("I519",18,"I523",0.9092,-1.71,-1.2943,0,"ONLY");
4005   gMC->Gspos("I519",17,"I523",0.9092,-1.79,-1.2943,0,"ONLY");
4006   gMC->Gspos("I519",16,"I523",0.9792,-1.79,-1.2943,0,"ONLY");
4007   gMC->Gspos("I519",15,"I523",0.9792,-1.71,-1.2943,0,"ONLY");
4008   gMC->Gspos("I519",14,"I523",1.0492,-1.71,-1.2943,0,"ONLY");
4009   gMC->Gspos("I519",13,"I523",1.0492,-1.79,-1.2943,0,"ONLY");
4010   gMC->Gspos("I519",12,"I523",1.207,-1.79,-1.2943,0,"ONLY");
4011   gMC->Gspos("I519",11,"I523",1.207,-1.71,-1.2943,0,"ONLY");
4012   gMC->Gspos("I519",10,"I523",1.277,-1.71,-1.2943,0,"ONLY");
4013   gMC->Gspos("I519",9,"I523",1.277,-1.79,-1.2943,0,"ONLY");
4014   gMC->Gspos("I519",8,"I523",1.347,-1.79,-1.2943,0,"ONLY");
4015   gMC->Gspos("I519",7,"I523",1.347,-1.71,-1.2943,0,"ONLY");
4016   gMC->Gspos("I519",6,"I523",3.162,-1.71,-1.2943,0,"ONLY");
4017   gMC->Gspos("I519",5,"I523",3.162,-1.79,-1.2943,0,"ONLY");
4018   gMC->Gspos("I519",4,"I523",3.232,-1.79,-1.2943,0,"ONLY");
4019   gMC->Gspos("I519",3,"I523",3.232,-1.71,-1.2943,0,"ONLY");
4020   gMC->Gspos("I521",12,"I523",-2.8209,-1.7925,-0.982,0,"ONLY");
4021   gMC->Gspos("I521",11,"I523",-1.6895,-1.7925,-0.982,0,"ONLY");
4022   gMC->Gspos("I521",10,"I523",-0.5631,-1.7925,-0.982,0,"ONLY");
4023   gMC->Gspos("I521",9,"I523",0.5633,-1.7925,-0.982,0,"ONLY");
4024   gMC->Gspos("I521",8,"I523",1.6861,-1.7925,-0.982,0,"ONLY");
4025   gMC->Gspos("I521",7,"I523",2.8161,-1.7925,-0.982,0,"ONLY");
4026   gMC->Gspos("I519",2,"I523",3.302,-1.79,-1.2943,0,"ONLY");
4027   gMC->Gspos("I520",3,"I523",0.0001,-1.845,-1.19,0,"ONLY");
4028   gMC->Gspos("I520",2,"I523",-2.2499,-1.845,-1.19,0,"ONLY");
4029   gMC->Gspos("I521",6,"I523",-2.8209,-1.7075,-0.982,0,"ONLY");
4030   gMC->Gspos("I521",5,"I523",-1.6895,-1.7075,-0.982,0,"ONLY");
4031   gMC->Gspos("I521",4,"I523",-0.5631,-1.7075,-0.982,0,"ONLY");
4032   gMC->Gspos("I521",3,"I523",0.5633,-1.7075,-0.982,0,"ONLY");
4033   gMC->Gspos("I521",2,"I523",1.6861,-1.7075,-0.982,0,"ONLY");
4034   gMC->Gspos("I518",1,"I523",0.0001,-1.75,-1.065,0,"ONLY");
4035   gMC->Gspos("I519",1,"I523",3.302,-1.71,-1.2943,0,"ONLY");
4036   gMC->Gspos("I520",1,"I523",2.2501,-1.845,-1.19,0,"ONLY");
4037   gMC->Gspos("I521",1,"I523",2.8161,-1.7075,-0.982,0,"ONLY");
4038
4039   gMC->Gspos("I522",1,"I523",2.2501,-1.655,-1.3,idrotm[583],"ONLY");
4040   gMC->Gspos("I522",2,"I523",-2.2499,-1.655,-1.3,idrotm[583],"ONLY");
4041
4042   gMC->Gspos("I542",2,"I523",-2.2499,-1.615,0.0,idrotm[573],"ONLY");
4043   gMC->Gspos("I541",2,"I523",-2.2499,-1.615,0.0,idrotm[573],"ONLY");
4044   gMC->Gspos("I541",1,"I523",2.2501,-1.615,0.0,0,"ONLY");
4045   gMC->Gspos("I542",1,"I523",2.2501,-1.615,0.0,0,"ONLY");
4046   gMC->Gspos("I543",1,"I523",2.1001,-1.615,0.955,0,"ONLY");
4047   gMC->Gspos("I543",2,&qu