MUON/TestMUONPreprocessor.C

   1 /**************************************************************************
   2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
   3  *                                                                        *
   4  * Author: The ALICE Off-line Project.                                    *
   5  * Contributors are mentioned in the code where appropriate.              *
   6  *                                                                        *
   7  * Permission to use, copy, modify and distribute this software and its   *
   8  * documentation strictly for non-commercial purposes is hereby granted   *
   9  * without fee, provided that the above copyright notice appears in all   *
  10  * copies and that both the copyright notice and this permission notice   *
  11  * appear in the supporting documentation. The authors make no claims     *
  12  * about the suitability of this software for any purpose. It is          *
  13  * provided "as is" without express or implied warranty.                  *
  14  **************************************************************************/
  15
  16 /* $Id$ */
  17
  18 #if !defined(__CINT__) || defined(__MAKECINT__)
  19
  20 /// \ingroup macros
  21 /// \file TestMUONPreprocessor.C
  22 /// \brief The macro for testing the shuttle preprocessors
  23 ///
  24 /// This macro runs the test preprocessor for MUON.
  25 /// It uses AliTestShuttle to simulate a full Shuttle process
  26 ///
  27 /// The input data has to be created first by other processes (or is created
  28 /// here by CreateDCSAliasMap() for tracker HV).
  29 ///
  30 /// To play with it, you'll have to set/modify several lines, to
  31 /// - a) select input files, using shuttle->AddInputFile()
  32 /// - b) select run type, using shuttle->AddInputRunParameter() (the run type
  33 ///      dictates which task is really performed by the MUONPreprocessor
  34 ///
  35 /// You must load relevant libraries (besides normal MUON ones) before
  36 /// compiling this macro :
  37 /// <pre>
  38 /// gSystem->Load("$ALICE_ROOT/SHUTTLE/TestShuttle/libTestShuttle");
  39 /// gSystem->Load("libMUONshuttle.so");
  40 /// </pre>
  41 ///
  42 /// For more information on usage, please see the \ref README_shuttle page.
  43 ///
  44 /// \author Laurent Aphecetche, SUBATECH Nantes
  45
  46 #include "TestMUONPreprocessor.h"
  47
  48 #include "AliMUONTrackerPreprocessor.h"
  49 #include "AliMUONTriggerPreprocessor.h"
  50
  51 #include "AliLog.h"
  52
  53 #include "AliMpExMap.h"
  54 #include "AliMpHelper.h"
  55 #include "AliMpHVNamer.h"
  56 #include "AliMpCDB.h"
  57
  58 #include "AliCDBManager.h"
  59 #include "AliCDBEntry.h"
  60 #include "AliCDBId.h"
  61 #include "AliShuttleInterface.h"
  62 #include "AliTestShuttle.h"
  63 #include "AliDCSValue.h"
  64
  65 #include "Riostream.h"
  66 #include "TSystem.h"
  67 #include "TMap.h"
  68 #include "TObjArray.h"
  69 #include "TObjString.h"
  70 #include "TString.h"
  71 #include "TRandom.h"
  72 #endif
  73
  74 void TestMUONPreprocessor(Int_t runNumber=80, const char* runType="CALIBRATION")
  75 {
  76   // runType can be :
  77   //
  78   // PEDESTAL -> pedestals
  79   // CALIBRATION -> gains
  80   // PHYSICS -> HV
  81   // GMS
  82
  83   // create AliTestShuttle instance
  84   // The parameters are run, startTime, endTime
  85   AliTestShuttle* shuttle = new AliTestShuttle(runNumber, 0, 1);
  86
  87   const char* inputCDB = "local://$ALICE_ROOT/SHUTTLE/TestShuttle/TestCDB";
  88   //const char* inputCDB = "alien://folder=/alice/testdata/2008/TS08a/OCDB";
  89
  90   AliTestShuttle::SetMainCDB(inputCDB);
  91   AliTestShuttle::SetMainRefStorage("local://$ALICE_ROOT/SHUTTLE/TestShuttle/TestReference");
  92
  93   TString rt(runType);
  94   rt.ToUpper();
  95
  96   if ( rt.Contains("PHYSICS") )
  97   {
  98     // Create DCS HV aliases
  99     TMap* dcsAliasMap = CreateDCSAliasMap(inputCDB, runNumber);
 100
 101     if ( dcsAliasMap )
 102     {
 103       // now give the alias map to the shuttle
 104       shuttle->SetDCSInput(dcsAliasMap);
 105     }
 106   }
 107
 108   printf("Test Shuttle temp dir: %s\n", AliShuttleInterface::GetShuttleTempDir());
 109   printf("Test Shuttle log dir: %s\n", AliShuttleInterface::GetShuttleLogDir());
 110   printf("Test OCDB storage Uri: %s\n", AliShuttleInterface::GetMainCDB().Data());
 111   printf("Test Reference storage Uri: %s\n", AliShuttleInterface::GetMainRefStorage().Data());
 112
 113   // The shuttle can process files that originate from DCS, DAQ and HLT.
 114   // To test it, we provide some local files and locations where these would be found when
 115   // the online machinery would be there.
 116   // In real life this functions would be produces by the sub-detectors
 117   // calibration programs in DCS, DAQ or HLT. These files can then be retrieved using the Shuttle.
 118   //
 119   // Files are added with the function AliTestShuttle::AddInputFile. The syntax is:
 120   // AddInputFile(<system>, <detector>, <id>, <source>, <local-file>)
 121   // In this example we add 4 files originating from different LDCs but with the same id (PEDESTALS)
 122
 123 //  shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","PEDESTALS","LDC0","$ALICE_ROOT/MUON/data/LDC0.ped");
 124 //  shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","PEDESTALS","LDC1","$ALICE_ROOT/MUON/data/LDC1.ped");
 125 //  shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","PEDESTALS","LDC2","$ALICE_ROOT/MUON/data/LDC2.ped");
 126 //  shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","PEDESTALS","LDC3","$ALICE_ROOT/MUON/data/LDC3.ped");
 127
 128   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","PEDESTALS","LDC0","/afs/cern.ch/user/l/laphecet/public/PEDESTALS/LDC0.ped");
 129   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","PEDESTALS","LDC1","/afs/cern.ch/user/l/laphecet/public/PEDESTALS/LDC1.ped");
 130   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","PEDESTALS","LDC2","/afs/cern.ch/user/l/laphecet/public/PEDESTALS/LDC2.ped");
 131   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","PEDESTALS","LDC3","/afs/cern.ch/user/l/laphecet/public/PEDESTALS/LDC3.ped");
 132
 133   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","GAINS","LDC0","/afs/cern.ch/user/l/laphecet/public/GAINS/LDC0.gain");
 134   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","GAINS","LDC1","/afs/cern.ch/user/l/laphecet/public/GAINS/LDC1.gain");
 135   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","GAINS","LDC2","/afs/cern.ch/user/l/laphecet/public/GAINS/LDC2.gain");
 136   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MCH","GAINS","LDC3","/afs/cern.ch/user/l/laphecet/public/GAINS/LDC3.gain");
 137
 138   // and GMS file
 139   shuttle->AddInputFile(AliTestShuttle::kDCS,"MCH","GMS","GMS","/afs/cern.ch/user/l/laphecet/public/GMS/GMS.root");
 140
 141   // and then the trigger stuff
 142   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MTR","LOCAL","LDC0","/afs/cern.ch/user/l/laphecet/public/TRIGGER/MtgLocalMask-1.dat");
 143   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MTR","REGIONAL","LDC0","/afs/cern.ch/user/l/laphecet/public/TRIGGER/MtgRegionalCrate-1.dat");
 144   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MTR","GLOBAL","LDC0","/afs/cern.ch/user/l/laphecet/public/TRIGGER/MtgGlobalCrate-1.dat");
 145   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MTR","LUT","LDC0","/afs/cern.ch/user/l/laphecet/public/TRIGGER/MtgLocalLut-1.dat");
 146   shuttle->AddInputFile(AliTestShuttle::kDAQ,"MTR","EXPORTED","LDC0","/afs/cern.ch/user/l/laphecet/public/TRIGGER/ExportedFiles.dat");
 147
 148   // The shuttle can read run parameters stored in the DAQ run logbook.
 149   // To test it, we must provide the run parameters manually. They will be retrieved in the preprocessor
 150   // using GetRunParameter function.
 151   // In real life the parameters will be retrieved automatically from the run logbook;
 152   shuttle->SetInputRunType(runType);
 153
 154   // Create the preprocessor that should be tested, it registers itself automatically to the shuttle
 155   new AliMUONTrackerPreprocessor(shuttle);
 156   new AliMUONTriggerPreprocessor(shuttle);
 157
 158   shuttle->Print();
 159
 160   // Test the preprocessor
 161   shuttle->Process();
 162 }
 163
 164 TMap* CreateDCSAliasMap(const char* inputCDB, Int_t runNumber)
 165 {
 166   /// Creates a DCS structure for MUON Tracker HV
 167   ///
 168   /// The structure is the following:
 169   ///   TMap (key --> value)
 170   ///     <DCSAlias> --> <valueList>
 171   ///     <DCSAlias> is a string
 172   ///     <valueList> is a TObjArray of AliDCSValue
 173   ///     An AliDCSValue consists of timestamp and a value in form of a AliSimpleValue
 174
 175   Bool_t undefStorage(kFALSE);
 176
 177   AliCDBManager* man = AliCDBManager::Instance();
 178   if (!man->IsDefaultStorageSet())
 179   {
 180     undefStorage = kTRUE;
 181     man->SetDefaultStorage(inputCDB);
 182     man->SetRun(runNumber);
 183   }
 184
 185   // Load mapping
 186   Bool_t ok = AliMpCDB::LoadDDLStore();
 187
 188   if (undefStorage)
 189   {
 190     man->UnsetDefaultStorage();
 191   }
 192
 193   if (!ok)
 194   {
 195     AliErrorGeneral("CreateDCSAliasMap","Could not load DDLStore from OCDB");
 196     return 0x0;
 197   }
 198
 199   TMap* aliasMap = new TMap;
 200   aliasMap->SetOwner(kTRUE);
 201
 202   TRandom random(0);
 203
 204   AliMpHVNamer hvNamer;
 205
 206   TObjArray* aliases = hvNamer.GenerateAliases();
 207
 208   for ( Int_t i = 0; i < aliases->GetEntries(); ++i )
 209   {
 210     TObjString* alias = static_cast<TObjString*>(aliases->At(i));
 211     TString& aliasName = alias->String();
 212     if ( aliasName.Contains("sw") )
 213     {
 214       // HV Switch (St345 only)
 215       TObjArray* valueSet = new TObjArray;
 216       valueSet->SetOwner(kTRUE);
 217       Bool_t value = kTRUE;
 218 //      Float_t r = random.Uniform();
 219 //      if ( r < 0.007 ) value = kFALSE;
 220 //      if ( aliasName.Contains("DE513sw2") ) value = kFALSE;
 221
 222       for ( UInt_t timeStamp = 0; timeStamp < 60*3; timeStamp += 60 )
 223       {
 224         AliDCSValue* dcsValue = new AliDCSValue(value,timeStamp);
 225         valueSet->Add(dcsValue);
 226       }
 227       aliasMap->Add(new TObjString(*alias),valueSet);
 228     }
 229     else
 230     {
 231       TObjArray* valueSet = new TObjArray;
 232       valueSet->SetOwner(kTRUE);
 233       for ( UInt_t timeStamp = 0; timeStamp < 60*15; timeStamp += 120 )
 234       {
 235         Float_t value = random.Gaus(1750,62.5);
 236         if ( aliasName == "MchHvLvLeft/Chamber00Left/Quad2Sect1.actual.vMon") value = 500;
 237         AliDCSValue* dcsValue = new AliDCSValue(value,timeStamp);
 238         valueSet->Add(dcsValue);
 239       }
 240       if ( aliasName == "MchHvLvLeft/Chamber04Left/Slat06.actual.vMon" ) continue;
 241       aliasMap->Add(new TObjString(*alias),valueSet);
 242     }
 243   }
 244
 245   delete aliases;
 246
 247   return aliasMap;
 248 }
 249