1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
18 Revision 1.23 2001/09/20 15:54:22 vicinanz
19 Updated Strip Structure (Double Stack)
21 Revision 1.22 2001/08/28 08:45:59 vicinanz
22 TTask and TFolder structures implemented
24 Revision 1.21 2001/05/16 14:57:24 alibrary
25 New files for folders and Stack
27 Revision 1.20 2001/05/04 10:09:48 vicinanz
28 Major upgrades to the strip structure
30 Revision 1.19 2000/12/04 08:48:20 alibrary
31 Fixing problems in the HEAD
33 Revision 1.18 2000/10/02 21:28:17 fca
34 Removal of useless dependecies via forward declarations
36 Revision 1.17 2000/06/06 07:52:09 vicinanz
37 NodeName array dimension enlarged
39 Revision 1.16 2000/05/10 16:52:18 vicinanz
40 New TOF version with holes for PHOS/RICH
42 Revision 1.14.2.1 2000/05/10 09:37:16 vicinanz
43 New version with Holes for PHOS/RICH
45 Revision 1.14 1999/11/05 22:39:06 fca
48 Revision 1.13 1999/11/02 11:26:39 fca
49 added stdlib.h for exit
51 Revision 1.12 1999/11/01 20:41:57 fca
52 Added protections against using the wrong version of FRAME
54 Revision 1.11 1999/10/22 08:04:14 fca
55 Correct improper use of negative parameters
57 Revision 1.10 1999/10/16 19:30:06 fca
58 Corrected Rotation Matrix and CVS log
60 Revision 1.9 1999/10/15 15:35:20 fca
61 New version for frame1099 with and without holes
63 Revision 1.8 1999/09/29 09:24:33 fca
64 Introduction of the Copyright and cvs Log
68 ///////////////////////////////////////////////////////////////////////////////
70 // Time Of Flight: design of C.Williams //
72 // This class contains the functions for version 1 of the Time Of Flight //
75 // VERSION WITH 5 MODULES AND TILTED STRIPS
77 // HOLES FOR PHOS DETECTOR
84 // University of Salerno - Italy
87 // University of Bologna - Italy
92 <img src="picts/AliTOFv1Class.gif">
96 ///////////////////////////////////////////////////////////////////////////////
101 #include "AliTOFv1.h"
103 #include "TGeometry.h"
106 #include <TLorentzVector.h>
110 #include "AliConst.h"
115 //_____________________________________________________________________________
119 // Default constructor
123 //_____________________________________________________________________________
124 AliTOFv1::AliTOFv1(const char *name, const char *title)
128 // Standard constructor
131 // Check that FRAME is there otherwise we have no place where to
133 AliModule* frame=gAlice->GetModule("FRAME");
135 Error("Ctor","TOF needs FRAME to be present\n");
138 if(frame->IsVersion()!=1) {
139 Error("Ctor","FRAME version 1 needed with this version of TOF\n");
147 //____________________________________________________________________________
149 void AliTOFv1::BuildGeometry()
152 // Build TOF ROOT geometry for the ALICE event display
155 const int kColorTOF = 27;
158 top = gAlice->GetGeometry()->GetNode("alice");
160 // Position the different copies
161 const Float_t krTof =(fRmax+fRmin)/2;
162 const Float_t khTof = fRmax-fRmin;
163 const Int_t kNTof = fNTof;
164 const Float_t kPi = TMath::Pi();
165 const Float_t kangle = 2*kPi/kNTof;
168 // Define TOF basic volume
170 char nodeName0[7], nodeName1[7], nodeName2[7];
171 char nodeName3[7], nodeName4[7], rotMatNum[7];
173 new TBRIK("S_TOF_C","TOF box","void",
174 120*0.5,khTof*0.5,fZlenC*0.5);
175 new TBRIK("S_TOF_B","TOF box","void",
176 120*0.5,khTof*0.5,fZlenB*0.5);
177 new TBRIK("S_TOF_A","TOF box","void",
178 120*0.5,khTof*0.5,fZlenA*0.5);
180 for (Int_t nodeNum=1;nodeNum<19;nodeNum++){
183 sprintf(rotMatNum,"rot50%i",nodeNum);
184 sprintf(nodeName0,"FTO00%i",nodeNum);
185 sprintf(nodeName1,"FTO10%i",nodeNum);
186 sprintf(nodeName2,"FTO20%i",nodeNum);
187 sprintf(nodeName3,"FTO30%i",nodeNum);
188 sprintf(nodeName4,"FTO40%i",nodeNum);
191 sprintf(rotMatNum,"rot5%i",nodeNum);
192 sprintf(nodeName0,"FTO0%i",nodeNum);
193 sprintf(nodeName1,"FTO1%i",nodeNum);
194 sprintf(nodeName2,"FTO2%i",nodeNum);
195 sprintf(nodeName3,"FTO3%i",nodeNum);
196 sprintf(nodeName4,"FTO4%i",nodeNum);
199 new TRotMatrix(rotMatNum,rotMatNum,90,-20*nodeNum,90,90-20*nodeNum,0,0);
200 ang = (4.5-nodeNum) * kangle;
203 node = new TNode(nodeName0,nodeName0,"S_TOF_C",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),299.15,rotMatNum);
204 node->SetLineColor(kColorTOF);
208 node = new TNode(nodeName1,nodeName1,"S_TOF_C",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),-299.15,rotMatNum);
209 node->SetLineColor(kColorTOF);
213 node = new TNode(nodeName2,nodeName2,"S_TOF_B",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),146.45,rotMatNum);
214 node->SetLineColor(kColorTOF);
218 node = new TNode(nodeName3,nodeName3,"S_TOF_B",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),-146.45,rotMatNum);
219 node->SetLineColor(kColorTOF);
222 if (nodeNum<8 || nodeNum>12) {
224 node = new TNode(nodeName4,nodeName4,"S_TOF_A",krTof*TMath::Cos(ang),krTof*TMath::Sin(ang),0.,rotMatNum);
225 node->SetLineColor(kColorTOF);
227 } // Modules A which are not to be installed for PHOS holes.
228 } // end loop on nodeNum
232 //_____________________________________________________________________________
233 void AliTOFv1::CreateGeometry()
236 // Create geometry for Time Of Flight version 0
240 <img src="picts/AliTOFv1.gif">
244 // Creates common geometry
246 AliTOF::CreateGeometry();
249 //_____________________________________________________________________________
250 void AliTOFv1::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenC,
251 Float_t zlenB, Float_t zlenA, Float_t ztof0)
254 // Definition of the Time Of Fligh Resistive Plate Chambers
255 // xFLT, yFLT, zFLT - sizes of TOF modules (large)
257 Float_t ycoor, zcoor;
259 Int_t *idtmed = fIdtmed->GetArray()-499;
262 Float_t hTof = fRmax-fRmin;
264 Float_t radius = fRmin+2.;//cm
268 par[2] = zlenC * 0.5;
269 gMC->Gsvolu("FTOC", "BOX ", idtmed[506], par, 3);
270 par[2] = zlenB * 0.5;
271 gMC->Gsvolu("FTOB", "BOX ", idtmed[506], par, 3);
272 par[2] = zlenA * 0.5;
273 gMC->Gsvolu("FTOA", "BOX ", idtmed[506], par, 3);
276 // Positioning of modules
278 Float_t zcor1 = ztof0 - zlenC*0.5;
279 Float_t zcor2 = ztof0 - zlenC - zlenB*0.5;
282 AliMatrix(idrotm[0], 90., 0., 0., 0., 90,-90.);
283 AliMatrix(idrotm[1], 90.,180., 0., 0., 90, 90.);
284 gMC->Gspos("FTOC", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
285 gMC->Gspos("FTOC", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
286 gMC->Gspos("FTOC", 1, "BTO2", 0, zcor1, 0, idrotm[0], "ONLY");
287 gMC->Gspos("FTOC", 2, "BTO2", 0, -zcor1, 0, idrotm[1], "ONLY");
288 gMC->Gspos("FTOC", 1, "BTO3", 0, zcor1, 0, idrotm[0], "ONLY");
289 gMC->Gspos("FTOC", 2, "BTO3", 0, -zcor1, 0, idrotm[1], "ONLY");
291 gMC->Gspos("FTOB", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
292 gMC->Gspos("FTOB", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
293 gMC->Gspos("FTOB", 1, "BTO2", 0, zcor2, 0, idrotm[0], "ONLY");
294 gMC->Gspos("FTOB", 2, "BTO2", 0, -zcor2, 0, idrotm[1], "ONLY");
295 gMC->Gspos("FTOB", 1, "BTO3", 0, zcor2, 0, idrotm[0], "ONLY");
296 gMC->Gspos("FTOB", 2, "BTO3", 0, -zcor2, 0, idrotm[1], "ONLY");
298 gMC->Gspos("FTOA", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
299 gMC->Gspos("FTOA", 0, "BTO3", 0, zcor3, 0, idrotm[0], "ONLY");
301 Float_t db = 0.5;//cm
302 Float_t xFLT, xFST, yFLT, zFLTA, zFLTB, zFLTC;
310 xFST = xFLT-fDeadBndX*2;//cm
312 // Sizes of MRPC pads
314 Float_t yPad = 0.505;//cm
316 // Large not sensitive volumes with Insensitive Freon
320 if(fDebug) cout << ClassName()
321 << ": ************************* TOF geometry **************************"
324 par[2] = (zFLTA *0.5);
325 gMC->Gsvolu("FLTA", "BOX ", idtmed[512], par, 3); // Insensitive Freon
326 gMC->Gspos ("FLTA", 0, "FTOA", 0., 0., 0., 0, "ONLY");
328 par[2] = (zFLTB * 0.5);
329 gMC->Gsvolu("FLTB", "BOX ", idtmed[512], par, 3); // Insensitive Freon
330 gMC->Gspos ("FLTB", 0, "FTOB", 0., 0., 0., 0, "ONLY");
332 par[2] = (zFLTC * 0.5);
333 gMC->Gsvolu("FLTC", "BOX ", idtmed[512], par, 3); // Insensitive Freon
334 gMC->Gspos ("FLTC", 0, "FTOC", 0., 0., 0., 0, "ONLY");
336 ////////// Layers of Aluminum before and after detector //////////
337 ////////// Aluminum Box for Modules (2.0 mm thickness) /////////
338 ////////// lateral walls not simulated
341 ycoor = -yFLT/2 + par[1];
342 par[2] = (zFLTA *0.5);
343 gMC->Gsvolu("FALA", "BOX ", idtmed[508], par, 3); // Alluminium
344 gMC->Gspos ("FALA", 1, "FLTA", 0., ycoor, 0., 0, "ONLY");
345 gMC->Gspos ("FALA", 2, "FLTA", 0.,-ycoor, 0., 0, "ONLY");
346 par[2] = (zFLTB *0.5);
347 gMC->Gsvolu("FALB", "BOX ", idtmed[508], par, 3); // Alluminium
348 gMC->Gspos ("FALB", 1, "FLTB", 0., ycoor, 0., 0, "ONLY");
349 gMC->Gspos ("FALB", 2, "FLTB", 0.,-ycoor, 0., 0, "ONLY");
350 par[2] = (zFLTC *0.5);
351 gMC->Gsvolu("FALC", "BOX ", idtmed[508], par, 3); // Alluminium
352 gMC->Gspos ("FALC", 1, "FLTC", 0., ycoor, 0., 0, "ONLY");
353 gMC->Gspos ("FALC", 2, "FLTC", 0.,-ycoor, 0., 0, "ONLY");
355 ///////////////// Detector itself //////////////////////
357 const Float_t kdeadBound = fDeadBndZ; //cm non-sensitive between the pad edge
358 //and the boundary of the strip
359 const Int_t knx = fNpadX; // number of pads along x
360 const Int_t knz = fNpadZ; // number of pads along z
361 const Float_t kspace = fSpace; //cm distance from the front plate of the box
363 Float_t zSenStrip = fZpad*fNpadZ;//cm
364 Float_t stripWidth = zSenStrip + 2*kdeadBound;
368 par[2] = stripWidth*0.5;
370 // new description for strip volume -double stack strip-
371 // -- all constants are expressed in cm
372 // heigth of different layers
373 const Float_t khhony = 1. ; // heigth of HONY Layer
374 const Float_t khpcby = 0.15 ; // heigth of PCB Layer
375 const Float_t khmyly = 0.035 ; // heigth of MYLAR Layer
376 const Float_t khgraphy = 0.02 ; // heigth of GRAPHITE Layer
377 const Float_t khglasseiy = 0.17; // 0.6 Ext. Glass + 1.1 i.e. (Int. Glass/2) (mm)
378 const Float_t khsensmy = 0.11 ; // heigth of Sensitive Freon Mixture
379 const Float_t kwsensmz = 2*3.5 ; // cm
380 const Float_t klsensmx = 48*2.5; // cm
381 const Float_t kwpadz = 3.5; // cm z dimension of the FPAD volume
382 const Float_t klpadx = 2.5; // cm x dimension of the FPAD volume
384 // heigth of the FSTR Volume (the strip volume)
385 const Float_t khstripy = 2*khhony+3*khpcby+4*(khmyly+khgraphy+khglasseiy)+2*khsensmy;
386 // width of the FSTR Volume (the strip volume)
387 const Float_t kwstripz = 10.;
388 // length of the FSTR Volume (the strip volume)
389 const Float_t klstripx = 122.;
391 Float_t parfp[3]={klstripx*0.5,khstripy*0.5,kwstripz*0.5};
392 // coordinates of the strip center in the strip reference frame; used for positioning
393 // internal strip volumes
394 Float_t posfp[3]={0.,0.,0.};
397 // FSTR volume definition and filling this volume with non sensitive Gas Mixture
398 gMC->Gsvolu("FSTR","BOX",idtmed[512],parfp,3);
399 //-- HONY Layer definition
401 parfp[1] = khhony*0.5;
403 gMC->Gsvolu("FHON","BOX",idtmed[503],parfp,3);
404 // positioning 2 HONY Layers on FSTR volume
406 posfp[1]=-khstripy*0.5+parfp[1];
407 gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY");
408 gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
410 //-- PCB Layer definition
411 parfp[1] = khpcby*0.5;
412 gMC->Gsvolu("FPCB","BOX",idtmed[504],parfp,3);
413 // positioning 2 PCB Layers on FSTR volume
414 posfp[1]=-khstripy*0.5+khhony+parfp[1];
415 gMC->Gspos("FPCB",1,"FSTR",0., posfp[1],0.,0,"ONLY");
416 gMC->Gspos("FPCB",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
417 // positioning the central PCB layer
418 gMC->Gspos("FPCB",3,"FSTR",0.,0.,0.,0,"ONLY");
422 //-- MYLAR Layer definition
423 parfp[1] = khmyly*0.5;
424 gMC->Gsvolu("FMYL","BOX",idtmed[511],parfp,3);
425 // positioning 2 MYLAR Layers on FSTR volume
426 posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1];
427 gMC->Gspos("FMYL",1,"FSTR",0., posfp[1],0.,0,"ONLY");
428 gMC->Gspos("FMYL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
429 // adding further 2 MYLAR Layers on FSTR volume
430 posfp[1] = khpcby*0.5+parfp[1];
431 gMC->Gspos("FMYL",3,"FSTR",0., posfp[1],0.,0,"ONLY");
432 gMC->Gspos("FMYL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
435 //-- Graphite Layer definition
436 parfp[1] = khgraphy*0.5;
437 gMC->Gsvolu("FGRP","BOX",idtmed[502],parfp,3);
438 // positioning 2 Graphite Layers on FSTR volume
439 posfp[1] = -khstripy*0.5+khhony+khpcby+khmyly+parfp[1];
440 gMC->Gspos("FGRP",1,"FSTR",0., posfp[1],0.,0,"ONLY");
441 gMC->Gspos("FGRP",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
442 // adding further 2 Graphite Layers on FSTR volume
443 posfp[1] = khpcby*0.5+khmyly+parfp[1];
444 gMC->Gspos("FGRP",3,"FSTR",0., posfp[1],0.,0,"ONLY");
445 gMC->Gspos("FGRP",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
448 //-- Glass (EXT. +Semi INT.) Layer definition
449 parfp[1] = khglasseiy*0.5;
450 gMC->Gsvolu("FGLA","BOX",idtmed[514],parfp,3);
451 // positioning 2 Glass Layers on FSTR volume
452 posfp[1] = -khstripy*0.5+khhony+khpcby+khmyly+khgraphy+parfp[1];
453 gMC->Gspos("FGLA",1,"FSTR",0., posfp[1],0.,0,"ONLY");
454 gMC->Gspos("FGLA",2,"FSTR",0.,-posfp[1],0.,0,"ONLY");
455 // adding further 2 Glass Layers on FSTR volume
456 posfp[1] = khpcby*0.5+khmyly+khgraphy+parfp[1];
457 gMC->Gspos("FGLA",3,"FSTR",0., posfp[1],0.,0,"ONLY");
458 gMC->Gspos("FGLA",4,"FSTR",0.,-posfp[1],0.,0,"ONLY");
461 //-- Sensitive Mixture Layer definition
462 parfp[0] = klsensmx*0.5;
463 parfp[1] = khsensmy*0.5;
464 parfp[2] = kwsensmz*0.5;
465 gMC->Gsvolu("FSEN","BOX",idtmed[513],parfp,3);
466 gMC->Gsvolu("FNSE","BOX",idtmed[512],parfp,3);
467 // positioning 2 gas Layers on FSTR volume
468 // the upper is insensitive freon
469 // while the remaining is sensitive
470 posfp[1] = khpcby*0.5+khmyly+khgraphy+khglasseiy+parfp[1];
471 gMC->Gspos("FNSE",0,"FSTR", 0., posfp[1],0.,0,"ONLY");
472 gMC->Gspos("FSEN",0,"FSTR", 0.,-posfp[1],0.,0,"ONLY");
474 // dividing FSEN along z in knz=2 and along x in knx=48
475 gMC->Gsdvn("FSEZ","FSEN",knz,3);
476 gMC->Gsdvn("FSEX","FSEZ",knx,1);
478 // FPAD volume definition
479 parfp[0] = klpadx*0.5;
480 parfp[1] = khsensmy*0.5;
481 parfp[2] = kwpadz*0.5;
482 gMC->Gsvolu("FPAD","BOX",idtmed[513],parfp,3);
483 // positioning the FPAD volumes on previous divisions
484 gMC->Gspos("FPAD",0,"FSEX",0.,0.,0.,0,"ONLY");
486 //// Positioning the Strips (FSTR) in the FLT volumes /////
490 Float_t t = zFLTC+zFLTB+zFLTA*0.5+ 2*db;//Half Width of Barrel
492 Float_t gap = fGapA; //cm distance between the strip axis
498 ycoor = -14.5 + kspace ; //2 cm over front plate
500 AliMatrix (idrotm[0], 90., 0.,90.,90.,0., 90.);
501 gMC->Gspos("FSTR",j,"FLTA",0.,ycoor, 0.,idrotm[0],"ONLY");
503 printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
504 printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
508 Int_t upDown = -1; // upDown=-1 -> Upper strip
509 // upDown=+1 -> Lower strip
511 ang = atan(zcoor/radius);
513 AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
514 AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
516 ycoor = -14.5+ kspace; //2 cm over front plate
517 ycoor += (1-(upDown+1)/2)*gap;
518 gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
519 gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
521 printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
522 printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
525 upDown*= -1; // Alternate strips
526 zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
527 upDown*gap*TMath::Tan(ang)-
528 (zSenStrip/2)/TMath::Cos(ang);
529 } while (zcoor-(stripWidth/2)*TMath::Cos(ang)>-t+zFLTC+zFLTB+db*2);
531 zcoor = zcoor+(zSenStrip/2)/TMath::Cos(ang)+
532 upDown*gap*TMath::Tan(ang)+
533 (zSenStrip/2)/TMath::Cos(ang);
536 zcoor = zcoor-(zSenStrip/2)/TMath::Cos(ang)-
537 upDown*gap*TMath::Tan(ang)-
538 (zSenStrip/2)/TMath::Cos(ang);
540 ang = atan(zcoor/radius);
542 AliMatrix (idrotm[nrot], 90., 0.,90.-ang,90.,-ang, 90.);
543 AliMatrix (idrotm[nrot+1],90.,180.,90.+ang,90., ang, 90.);
546 ycoor = -14.5+ kspace; //2 cm over front plate
547 ycoor += (1-(upDown+1)/2)*gap;
548 gMC->Gspos("FSTR",j ,"FLTA",0.,ycoor, zcoor,idrotm[nrot], "ONLY");
549 gMC->Gspos("FSTR",j+1,"FLTA",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
551 printf("%f, St. %2i, Pl.3 ",ang*kRaddeg,i);
552 printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
554 ycoor = -hTof/2.+ kspace;//2 cm over front plate
561 Float_t deadRegion = 1.0;//cm
563 zpos = zcoor - (zSenStrip/2)/TMath::Cos(ang)-
564 upDown*gap*TMath::Tan(ang)-
565 (zSenStrip/2)/TMath::Cos(ang)-
566 deadRegion/TMath::Cos(ang);
568 ang = atan(zpos/radius);
570 AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
572 ycoor = -hTof*0.5+ kspace ; //2 cm over front plate
573 ycoor += (1-(upDown+1)/2)*gap;
574 zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
575 gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
577 printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
578 printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
584 zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)-
585 upDown*gap*TMath::Tan(ang)-
586 (zSenStrip/2)/TMath::Cos(ang);
587 ang = atan(zpos/radius);
589 AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
591 ycoor = -hTof*0.5+ kspace ; //2 cm over front plate
592 ycoor += (1-(upDown+1)/2)*gap;
593 zcoor = zpos+(zFLTA*0.5+zFLTB*0.5+db); // Moves to the system of the modulus FLTB
594 gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
596 printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
597 printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
601 } while (TMath::Abs(ang*kRaddeg)<22.5);
602 //till we reach a tilting angle of 22.5 degrees
604 ycoor = -hTof*0.5+ kspace ; //2 cm over front plate
605 zpos = zpos - zSenStrip/TMath::Cos(ang);
608 ang = atan(zpos/radius);
610 AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
612 zcoor = zpos+(zFLTB/2+zFLTA/2+db);
613 gMC->Gspos("FSTR",i, "FLTB", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
614 zpos = zpos - zSenStrip/TMath::Cos(ang);
615 printf("%f, St. %2i, Pl.4 ",ang*kRaddeg,i);
616 printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
619 } while (zpos-stripWidth*0.5/TMath::Cos(ang)>-t+zFLTC+db);
623 zpos = zpos + zSenStrip/TMath::Cos(ang);
625 zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)+
627 (zSenStrip/2)/TMath::Cos(ang);
631 ycoor= -hTof*0.5+kspace+gap;
635 ang = atan(zpos/radius);
637 AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 270.);
639 zcoor = zpos+(zFLTC*0.5+zFLTB+zFLTA*0.5+db*2);
640 gMC->Gspos("FSTR",i, "FLTC", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
642 printf("%f, St. %2i, Pl.5 ",ang*kRaddeg,i);
643 printf("y = %f, z = %f, zpos = %f \n",ycoor,zcoor,zpos);
645 zpos = zpos - zSenStrip/TMath::Cos(ang);
646 } while (zpos-stripWidth*TMath::Cos(ang)*0.5>-t);
649 ////////// Layers after strips /////////////////
650 // honeycomb (Polyethilene) Layer after (1.2cm)
652 Float_t overSpace = fOverSpc;//cm
656 par[2] = (zFLTA *0.5);
657 ycoor = -yFLT/2 + overSpace + par[1];
658 gMC->Gsvolu("FPEA", "BOX ", idtmed[503], par, 3); // Hony
659 gMC->Gspos ("FPEA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
660 par[2] = (zFLTB *0.5);
661 gMC->Gsvolu("FPEB", "BOX ", idtmed[503], par, 3); // Hony
662 gMC->Gspos ("FPEB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
663 par[2] = (zFLTC *0.5);
664 gMC->Gsvolu("FPEC", "BOX ", idtmed[503], par, 3); // Hony
665 gMC->Gspos ("FPEC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
667 // Electronics (Cu) after
670 par[1] = 1.43*0.05*0.5; // 5% of X0
671 par[2] = (zFLTA *0.5);
673 gMC->Gsvolu("FECA", "BOX ", idtmed[501], par, 3); // Cu
674 gMC->Gspos ("FECA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
675 par[2] = (zFLTB *0.5);
676 gMC->Gsvolu("FECB", "BOX ", idtmed[501], par, 3); // Cu
677 gMC->Gspos ("FECB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
678 par[2] = (zFLTC *0.5);
679 gMC->Gsvolu("FECC", "BOX ", idtmed[501], par, 3); // Cu
680 gMC->Gspos ("FECC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
682 // cooling WAter after
685 par[1] = 36.1*0.02*0.5; // 2% of X0
686 par[2] = (zFLTA *0.5);
688 gMC->Gsvolu("FWAA", "BOX ", idtmed[515], par, 3); // Water
689 gMC->Gspos ("FWAA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
690 par[2] = (zFLTB *0.5);
691 gMC->Gsvolu("FWAB", "BOX ", idtmed[515], par, 3); // Water
692 gMC->Gspos ("FWAB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
693 par[2] = (zFLTC *0.5);
694 gMC->Gsvolu("FWAC", "BOX ", idtmed[515], par, 3); // Water
695 gMC->Gspos ("FWAC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
700 par[1] = (yFLT/2-ycoor-0.2)*0.5; // Aluminum layer considered (0.2 cm)
701 par[2] = (zFLTA *0.5);
703 gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air
704 gMC->Gspos ("FAIA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
705 par[2] = (zFLTB *0.5);
706 gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air
707 gMC->Gspos ("FAIB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
708 par[2] = (zFLTC *0.5);
709 gMC->Gsvolu("FAIC", "BOX ", idtmed[500], par, 3); // Air
710 gMC->Gspos ("FAIC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
712 //Back Plate honycomb (2cm)
716 ycoor = yFLT/2 - par[1];
717 gMC->Gsvolu("FBPA", "BOX ", idtmed[503], par, 3); // Hony
718 gMC->Gspos ("FBPA", 0, "FLTA", 0., ycoor, 0., 0, "ONLY");
719 gMC->Gsvolu("FBPB", "BOX ", idtmed[503], par, 3); // Hony
720 gMC->Gspos ("FBPB", 0, "FLTB", 0., ycoor, 0., 0, "ONLY");
721 gMC->Gsvolu("FBPC", "BOX ", idtmed[503], par, 3); // Hony
722 gMC->Gspos ("FBPC", 0, "FLTC", 0., ycoor, 0., 0, "ONLY");
726 //_____________________________________________________________________________
727 void AliTOFv1::DrawModule() const
730 // Draw a shaded view of the Time Of Flight version 1
732 // Set everything unseen
733 gMC->Gsatt("*", "seen", -1);
735 // Set ALIC mother transparent
736 gMC->Gsatt("ALIC","SEEN",0);
738 // Set the volumes visible
739 gMC->Gsatt("ALIC","SEEN",0);
741 gMC->Gsatt("FTOA","SEEN",1);
742 gMC->Gsatt("FTOB","SEEN",1);
743 gMC->Gsatt("FTOC","SEEN",1);
744 gMC->Gsatt("FLTA","SEEN",1);
745 gMC->Gsatt("FLTB","SEEN",1);
746 gMC->Gsatt("FLTC","SEEN",1);
747 gMC->Gsatt("FPLA","SEEN",1);
748 gMC->Gsatt("FPLB","SEEN",1);
749 gMC->Gsatt("FPLC","SEEN",1);
750 gMC->Gsatt("FSTR","SEEN",1);
751 gMC->Gsatt("FPEA","SEEN",1);
752 gMC->Gsatt("FPEB","SEEN",1);
753 gMC->Gsatt("FPEC","SEEN",1);
755 gMC->Gsatt("FLZ1","SEEN",0);
756 gMC->Gsatt("FLZ2","SEEN",0);
757 gMC->Gsatt("FLZ3","SEEN",0);
758 gMC->Gsatt("FLX1","SEEN",0);
759 gMC->Gsatt("FLX2","SEEN",0);
760 gMC->Gsatt("FLX3","SEEN",0);
761 gMC->Gsatt("FPAD","SEEN",0);
763 gMC->Gdopt("hide", "on");
764 gMC->Gdopt("shad", "on");
765 gMC->Gsatt("*", "fill", 7);
766 gMC->SetClipBox(".");
767 gMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000);
769 gMC->Gdraw("alic", 40, 30, 0, 12, 9.5, .02, .02);
770 gMC->Gdhead(1111, "Time Of Flight");
771 gMC->Gdman(18, 4, "MAN");
772 gMC->Gdopt("hide","off");
774 //_____________________________________________________________________________
775 void AliTOFv1::DrawDetectorModules()
778 // Draw a shaded view of the TOF detector version 1
781 AliMC* pMC = AliMC::GetMC();
783 //Set ALIC mother transparent
784 pMC->Gsatt("ALIC","SEEN",0);
787 //Set volumes visible
790 // Level 1 for TOF volumes
791 gMC->Gsatt("B077","seen",0);
794 //==========> Level 2
796 gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
797 gMC->Gsatt("B071","seen",0);
798 gMC->Gsatt("B074","seen",0);
799 gMC->Gsatt("B075","seen",0);
800 gMC->Gsatt("B080","seen",0); // B080 does not has sub-level
804 gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
805 gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
806 gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
807 gMC->Gsatt("B069","seen",-1); // all B069 sub-levels skipped -
808 gMC->Gsatt("B056","seen",0); // B056 does not has sub-levels -
809 gMC->Gsatt("B059","seen",-1); // all B059 sub-levels skipped -
810 gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
811 gMC->Gsatt("BTR1","seen",0); // BTR1 do not have sub-levels -
812 gMC->Gsatt("BTO1","seen",0);
816 gMC->Gsatt("BTR2","seen",0); // BTR2 does not has sub-levels -
817 gMC->Gsatt("BTO2","seen",0);
820 gMC->Gsatt("BTR3","seen",0); // BTR3 do not have sub-levels -
821 gMC->Gsatt("BTO3","seen",0);
823 // ==================> Level 3
824 // Level 3 of B071 / Level 2 of BTO1
825 gMC->Gsatt("FTOC","seen",-2);
826 gMC->Gsatt("FTOB","seen",-2);
827 gMC->Gsatt("FTOA","seen",-2);
829 // Level 3 of B074 / Level 2 of BTO2
830 // -> cfr previous settings
832 // Level 3 of B075 / Level 2 of BTO3
833 // -> cfr previous settings
835 gMC->Gdopt("hide","on");
836 gMC->Gdopt("shad","on");
837 gMC->Gsatt("*", "fill", 5);
838 gMC->SetClipBox(".");
839 gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000);
841 gMC->Gdraw("alic", 45, 40, 0, 10, 10, .015, .015);
842 gMC->Gdhead(1111,"TOF detector V1");
843 gMC->Gdman(18, 4, "MAN");
844 gMC->Gdopt("hide","off");
847 //_____________________________________________________________________________
848 void AliTOFv1::DrawDetectorStrips()
851 // Draw a shaded view of the TOF strips for version 1
854 AliMC* pMC = AliMC::GetMC();
856 //Set ALIC mother transparent
857 pMC->Gsatt("ALIC","SEEN",0);
860 //Set volumes visible
862 // Level 1 for TOF volumes
863 gMC->Gsatt("B077","seen",0);
865 //==========> Level 2
867 gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped -
868 gMC->Gsatt("B071","seen",0);
869 gMC->Gsatt("B074","seen",0);
870 gMC->Gsatt("B075","seen",0);
871 gMC->Gsatt("B080","seen",0); // B080 does not has sub-level
874 gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped -
875 gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped -
876 gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped -
877 gMC->Gsatt("B069","seen",-1); // all B069 sub-levels skipped -
878 gMC->Gsatt("B056","seen",0); // B056 does not has sub-levels -
879 gMC->Gsatt("B059","seen",-1); // all B059 sub-levels skipped -
880 gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped -
881 gMC->Gsatt("BTR1","seen",0); // BTR1 do not have sub-levels -
882 gMC->Gsatt("BTO1","seen",0);
884 // ==================> Level 3
885 // Level 3 of B071 / Level 2 of BTO1
886 gMC->Gsatt("FTOC","seen",0);
887 gMC->Gsatt("FTOB","seen",0);
888 gMC->Gsatt("FTOA","seen",0);
890 // Level 3 of B074 / Level 2 of BTO2
891 // -> cfr previous settings
893 // Level 3 of B075 / Level 2 of BTO3
894 // -> cfr previous settings
897 // ==========================> Level 4
898 // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOC
899 gMC->Gsatt("FLTC","seen",0);
900 // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOB
901 gMC->Gsatt("FLTB","seen",0);
902 // Level 4 of B071 / Level 3 of BTO1 / Level 2 of FTOA
903 gMC->Gsatt("FLTA","seen",0);
905 // Level 4 of B074 / Level 3 of BTO2 / Level 2 of FTOC
906 // -> cfr previous settings
907 // Level 4 of B074 / Level 3 of BTO2 / Level 2 of FTOB
908 // -> cfr previous settings
910 // Level 4 of B075 / Level 3 of BTO3 / Level 2 of FTOC
911 // -> cfr previous settings
913 //======================================> Level 5
914 // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOC / Level 2 of FLTC
915 gMC->Gsatt("FALC","seen",0); // no children for FALC
916 gMC->Gsatt("FSTR","seen",-2);
917 gMC->Gsatt("FPEC","seen",0); // no children for FPEC
918 gMC->Gsatt("FECC","seen",0); // no children for FECC
919 gMC->Gsatt("FWAC","seen",0); // no children for FWAC
920 gMC->Gsatt("FAIC","seen",0); // no children for FAIC
922 // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOB / Level 2 of FLTB
923 gMC->Gsatt("FALB","seen",0); // no children for FALB
924 //--> gMC->Gsatt("FSTR","seen",-2);
927 // -> cfr previous settings
928 gMC->Gsatt("FPEB","seen",0); // no children for FPEB
929 gMC->Gsatt("FECB","seen",0); // no children for FECB
930 gMC->Gsatt("FWAB","seen",0); // no children for FWAB
931 gMC->Gsatt("FAIB","seen",0); // no children for FAIB
933 // Level 5 of B071 / Level 4 of BTO1 / Level 3 of FTOA / Level 2 of FLTA
934 gMC->Gsatt("FALA","seen",0); // no children for FALB
935 //--> gMC->Gsatt("FSTR","seen",-2);
936 // -> cfr previous settings
937 gMC->Gsatt("FPEA","seen",0); // no children for FPEA
938 gMC->Gsatt("FECA","seen",0); // no children for FECA
939 gMC->Gsatt("FWAA","seen",0); // no children for FWAA
940 gMC->Gsatt("FAIA","seen",0); // no children for FAIA
943 gMC->Gsatt("BTR2","seen",0); // BTR2 does not has sub-levels -
944 gMC->Gsatt("BTO2","seen",0);
947 gMC->Gsatt("BTR3","seen",0); // BTR3 do not have sub-levels -
948 gMC->Gsatt("BTO3","seen",0);
950 // for others Level 5, cfr. previous settings
952 gMC->Gdopt("hide","on");
953 gMC->Gdopt("shad","on");
954 gMC->Gsatt("*", "fill", 5);
955 gMC->SetClipBox(".");
956 gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000);
958 gMC->Gdraw("alic", 45, 40, 0, 10, 10, .015, .015);
959 gMC->Gdhead(1111,"TOF Strips V1");
960 gMC->Gdman(18, 4, "MAN");
961 gMC->Gdopt("hide","off");
964 //_____________________________________________________________________________
965 void AliTOFv1::CreateMaterials()
968 // Define materials for the Time Of Flight
970 AliTOF::CreateMaterials();
973 //_____________________________________________________________________________
974 void AliTOFv1::Init()
977 // Initialise the detector after the geometry has been defined
979 printf("**************************************"
981 "**************************************\n");
982 printf("\n Version 1 of TOF initialing, "
983 "TOF with holes for PHOS detector\n");
987 fIdFTOA = gMC->VolId("FTOA");
988 fIdFTOB = gMC->VolId("FTOB");
989 fIdFTOC = gMC->VolId("FTOC");
990 fIdFLTA = gMC->VolId("FLTA");
991 fIdFLTB = gMC->VolId("FLTB");
992 fIdFLTC = gMC->VolId("FLTC");
994 printf("**************************************"
996 "**************************************\n");
999 //_____________________________________________________________________________
1000 void AliTOFv1::StepManager()
1003 // Procedure called at each step in the Time Of Flight
1005 TLorentzVector mom, pos;
1006 Float_t xm[3],pm[3],xpad[3],ppad[3];
1007 Float_t hits[13],phi,phid,z;
1009 Int_t sector, plate, padx, padz, strip;
1010 Int_t copy, padzid, padxid, stripid, i;
1011 Int_t *idtmed = fIdtmed->GetArray()-499;
1012 Float_t incidenceAngle;
1014 if(gMC->GetMedium()==idtmed[513] &&
1015 gMC->IsTrackEntering() && gMC->TrackCharge()
1016 && gMC->CurrentVolID(copy)==fIdSens)
1018 // getting information about hit volumes
1020 padzid=gMC->CurrentVolOffID(2,copy);
1023 padxid=gMC->CurrentVolOffID(1,copy);
1026 stripid=gMC->CurrentVolOffID(4,copy);
1029 gMC->TrackPosition(pos);
1030 gMC->TrackMomentum(mom);
1032 // Double_t NormPos=1./pos.Rho();
1033 Double_t normMom=1./mom.Rho();
1035 // getting the cohordinates in pad ref system
1036 xm[0] = (Float_t)pos.X();
1037 xm[1] = (Float_t)pos.Y();
1038 xm[2] = (Float_t)pos.Z();
1040 pm[0] = (Float_t)mom.X()*normMom;
1041 pm[1] = (Float_t)mom.Y()*normMom;
1042 pm[2] = (Float_t)mom.Z()*normMom;
1044 gMC->Gmtod(xm,xpad,1);
1045 gMC->Gmtod(pm,ppad,2);
1047 incidenceAngle = TMath::ACos(ppad[1])*kRaddeg;
1052 if (TMath::Abs(z) <= fZlenA*0.5) plate = 3;
1053 if (z < (fZlenA*0.5+fZlenB) &&
1054 z > fZlenA*0.5) plate = 4;
1055 if (z >-(fZlenA*0.5+fZlenB) &&
1056 z < -fZlenA*0.5) plate = 2;
1057 if (z > (fZlenA*0.5+fZlenB)) plate = 5;
1058 if (z <-(fZlenA*0.5+fZlenB)) plate = 1;
1061 phid = phi*kRaddeg+180.;
1062 sector = Int_t (phid/20.);
1070 hits[6] = mom.Rho();
1075 hits[11]= incidenceAngle;
1076 hits[12]= gMC->Edep();
1084 AddHit(gAlice->CurrentTrack(),vol, hits);