1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
18 Revision 1.9 1999/09/29 09:24:33 fca
19 Introduction of the Copyright and cvs Log
23 ///////////////////////////////////////////////////////////////////////////////
25 // Time Of Flight: design of C.Williams FCA //
26 // This class contains the functions for version 1 of the Time Of Flight //
29 // VERSION WITH 5 MODULES AND TILTED STRIPS
31 // FULL COVERAGE VERSION
38 // University of Salerno - Italy
43 <img src="picts/AliTOFv3Class.gif">
47 ///////////////////////////////////////////////////////////////////////////////
55 //_____________________________________________________________________________
59 // Default constructor
63 //_____________________________________________________________________________
64 AliTOFv3::AliTOFv3(const char *name, const char *title)
68 // Standard constructor
72 //_____________________________________________________________________________
73 void AliTOFv3::CreateGeometry()
76 // Create geometry for Time Of Flight version 0
80 <img src="picts/AliTOFv3.gif">
84 // Creates common geometry
86 AliTOF::CreateGeometry();
89 //_____________________________________________________________________________
90 void AliTOFv3::TOFpc(Float_t xtof, Float_t ytof, Float_t zlen1,
91 Float_t zlen2, Float_t zlen3, Float_t ztof0)
94 // Definition of the Time Of Fligh Resistive Plate Chambers
95 // xFLT, yFLT, zFLT - sizes of TOF modules (large)
100 Int_t *idtmed = fIdtmed->GetArray()-499;
110 gMC->Gsvolu("FTO1", "BOX ", idtmed[506], par, 3);
112 gMC->Gsvolu("FTO2", "BOX ", idtmed[506], par, 3);
114 gMC->Gsvolu("FTO3", "BOX ", idtmed[506], par, 3);
117 // Positioning of modules
119 Float_t zcor1 = ztof0 - zlen1/2;
120 Float_t zcor2 = ztof0 - zlen1 - zlen2/2.;
123 AliMatrix(idrotm[0], 90., 0., 0., 0., 90, -90.);
124 AliMatrix(idrotm[1], 90., 180., 0., 0., 90, 90.);
125 gMC->Gspos("FTO1", 1, "BTO1", 0, zcor1, 0, idrotm[0], "ONLY");
126 gMC->Gspos("FTO1", 2, "BTO1", 0, -zcor1, 0, idrotm[1], "ONLY");
127 gMC->Gspos("FTO1", 1, "BTO2", 0, zcor1, 0, idrotm[0], "ONLY");
128 gMC->Gspos("FTO1", 2, "BTO2", 0, -zcor1, 0, idrotm[1], "ONLY");
129 gMC->Gspos("FTO1", 1, "BTO3", 0, zcor1, 0, idrotm[0], "ONLY");
130 gMC->Gspos("FTO1", 2, "BTO3", 0, -zcor1, 0, idrotm[1], "ONLY");
132 gMC->Gspos("FTO2", 1, "BTO1", 0, zcor2, 0, idrotm[0], "ONLY");
133 gMC->Gspos("FTO2", 2, "BTO1", 0, -zcor2, 0, idrotm[1], "ONLY");
134 gMC->Gspos("FTO2", 1, "BTO2", 0, zcor2, 0, idrotm[0], "ONLY");
135 gMC->Gspos("FTO2", 2, "BTO2", 0, -zcor2, 0, idrotm[1], "ONLY");
136 gMC->Gspos("FTO2", 1, "BTO3", 0, zcor2, 0, idrotm[0], "ONLY");
137 gMC->Gspos("FTO2", 2, "BTO3", 0, -zcor2, 0, idrotm[1], "ONLY");
139 gMC->Gspos("FTO3", 0, "BTO1", 0, zcor3, 0, idrotm[0], "ONLY");
140 gMC->Gspos("FTO3", 0, "BTO2", 0, zcor3, 0, idrotm[0], "ONLY");
141 gMC->Gspos("FTO3", 0, "BTO3", 0, zcor3, 0, idrotm[0], "ONLY");
143 // Subtraction the distance to TOF module boundaries
146 Float_t xFLT, yFLT, zFLT1, zFLT2, zFLT3;
148 xFLT = xtof -(.5 +.5)*2;
154 // Sizes of MRPC pads
156 Float_t yPad = 0.505;
158 // Large not sensitive volumes with CO2
162 cout <<"************************* TOF geometry **************************"<<endl;
164 par[2] = (zFLT1 / 2.);
165 gMC->Gsvolu("FLT1", "BOX ", idtmed[506], par, 3); // CO2
166 gMC->Gspos("FLT1", 0, "FTO1", 0., 0., 0., 0, "ONLY");
168 par[2] = (zFLT2 / 2.);
169 gMC->Gsvolu("FLT2", "BOX ", idtmed[506], par, 3); // CO2
170 gMC->Gspos("FLT2", 0, "FTO2", 0., 0., 0., 0, "ONLY");
172 par[2] = (zFLT3 / 2.);
173 gMC->Gsvolu("FLT3", "BOX ", idtmed[506], par, 3); // CO2
174 gMC->Gspos("FLT3", 0, "FTO3", 0., 0., 0., 0, "ONLY");
176 ////////// Layers before detector ////////////////////
178 // Alluminium layer in front 1.0 mm thick at the beginning
182 ycoor = -yFLT/2 + par[1];
183 gMC->Gsvolu("FMY1", "BOX ", idtmed[508], par, 3); // Alluminium
184 gMC->Gspos("FMY1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
185 gMC->Gsvolu("FMY2", "BOX ", idtmed[508], par, 3); // Alluminium
186 gMC->Gspos("FMY2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
187 gMC->Gsvolu("FMY3", "BOX ", idtmed[508], par, 3); // Alluminium
188 gMC->Gspos("FMY3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
190 // Honeycomb layer (1cm of special polyethilene)
191 ycoor = ycoor + par[1];
195 ycoor = ycoor + par[1];
196 gMC->Gsvolu("FPL1", "BOX ", idtmed[503], par, 3); // Hony
197 gMC->Gspos("FPL1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
198 gMC->Gsvolu("FPL2", "BOX ", idtmed[503], par, 3); // Hony
199 gMC->Gspos("FPL2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
200 gMC->Gsvolu("FPL3", "BOX ", idtmed[503], par, 3); // Hony
201 gMC->Gspos("FPL3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
203 ///////////////// Detector itself //////////////////////
205 const Float_t StripWidth = 7.81;//cm
206 const Float_t DeadBound = 1.;//cm non-sensitive between the pad edge and the boundary of the strip
207 const Int_t nx = 40; // number of pads along x
208 const Int_t nz = 2; // number of pads along z
209 const Float_t Gap=4.; //cm distance between the strip axis
210 const Float_t Space = 5.5; //cm distance from the front plate of the box
213 zSenStrip = StripWidth-2*DeadBound;//cm
217 par[2] = StripWidth/2.;
219 // Glass Layer of detector
220 gMC->Gsvolu("FSTR","BOX",idtmed[514],par,3);
222 // Freon for non-sesitive boundaries
226 gMC->Gsvolu("FNSF","BOX",idtmed[512],par,3);
227 gMC->Gspos("FNSF",0,"FSTR",0.,0.,0.,0,"ONLY");
228 // Mylar for non-sesitive boundaries
230 gMC->Gsvolu("FMYI","BOX",idtmed[510],par,3);
231 gMC->Gspos("FMYI",0,"FNSF",0.,0.,0.,0,"ONLY");
233 // Mylar for outer layers
235 ycoor = -yPad/2.+par[1];
236 gMC->Gsvolu("FMYX","BOX",idtmed[510],par,3);
237 gMC->Gspos("FMYX",1,"FSTR",0.,ycoor,0.,0,"ONLY");
238 gMC->Gspos("FMYX",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
244 gMC->Gsvolu("FGRL","BOX",idtmed[502],par,3);
245 gMC->Gspos("FGRL",1,"FSTR",0.,ycoor,0.,0,"ONLY");
246 gMC->Gspos("FGRL",2,"FSTR",0.,-ycoor,0.,0,"ONLY");
248 // Freon sensitive layer
251 par[2] = zSenStrip/2.;
252 gMC->Gsvolu("FCFC","BOX",idtmed[513],par,3);
253 gMC->Gspos("FCFC",0,"FNSF",0.,0.,0.,0,"ONLY");
255 // Pad definition x & z
256 gMC->Gsdvn("FLZ","FCFC", nz, 3);
257 gMC->Gsdvn("FLX","FLZ" , nx, 1);
263 gMC->Gsvolu("FPAD", "BOX ", idtmed[513], par, 3);
264 gMC->Gspos("FPAD", 0, "FLX", 0., 0., 0., 0, "ONLY");
267 //// Positioning the Strips (FSTR) in the FLT volumes /////
271 Float_t t = zFLT1+zFLT2+zFLT3/2.+7.*2.5;//Half Width of Barrel
279 Int_t UpDown=-1; // UpDown=-1 -> Upper strip, UpDown=+1 -> Lower strip
283 ang = ang*180/3.141592654;
284 AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 0.);
285 AliMatrix (idrotm[nrot+1], 90., 180., 90.+ang,90.,ang, 0);
286 ycoor = -29./2.+ Space; //2 cm over front plate
287 ycoor += (1-(UpDown+1)/2)*Gap;
288 gMC->Gspos("FSTR",j,"FLT3",0.,ycoor,zcoor,idrotm[nrot],"ONLY");
289 gMC->Gspos("FSTR",j+1,"FLT3",0.,ycoor,-zcoor,idrotm[nrot+1],"ONLY");
290 ang = ang*3.141592654/180;
291 zcoor=zcoor-(zSenStrip/2)/TMath::Cos(ang)+UpDown*Gap*TMath::Tan(ang)-(zSenStrip/2)/TMath::Cos(ang);
292 UpDown*= -1; // Alternate strips
295 } while (zcoor-(StripWidth/2)*TMath::Cos(ang)>-t+zFLT1+zFLT2+7*2.5);
297 ycoor = -29./2.+ Space; //2 cm over front plate
301 ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
302 Offset = StripWidth*TMath::Cos(ang)/2;
306 // UpDown has not to be reinitialized, so that the arrangement of the strips can continue coherently
309 ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
310 ang = ang*180/3.141592654;
311 AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 0.);
312 ycoor = -29./2.+ Space ; //2 cm over front plate
313 ycoor += (1-(UpDown+1)/2)*Gap;
314 zcoor = zpos+(zFLT3/2.+7+zFLT2/2); // Moves to the system of the centre of the modulus FLT2
315 gMC->Gspos("FSTR",i, "FLT2", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
316 ang = ang*3.141592654/180;
317 zpos = zpos - (zSenStrip/2)/TMath::Cos(ang)+UpDown*Gap*TMath::Tan(ang)-(zSenStrip/2)/TMath::Cos(ang);
318 last = StripWidth*TMath::Cos(ang)/2;
321 } while (zpos-(StripWidth/2)*TMath::Cos(ang)>-t+zFLT1+7);
325 ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
326 Offset = StripWidth*TMath::Cos(ang)/2.;
330 ycoor= -29./2.+Space+Gap/2;
333 ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
334 ang = ang*180/3.141592654;
335 AliMatrix (idrotm[nrot], 90., 0., 90.-ang,90.,ang, 0.);
337 zcoor = zpos+(zFLT1/2+zFLT2+zFLT3/2+7.*2.);
338 gMC->Gspos("FSTR",i, "FLT1", 0., ycoor, zcoor,idrotm[nrot], "ONLY");
339 ang = ang *3.141592654/180;
340 zpos = zpos - zSenStrip/TMath::Cos(ang);
341 last = StripWidth*TMath::Cos(ang)/2.;
342 } while (zpos>-t+7.+last);
344 printf("#######################################################\n");
345 printf(" Distance from the bound of the FLT3: zFLT3- %f cm \n", zpos+(zSenStrip/2)/TMath::Cos(ang));
346 ang = atan(zpos/sqrt(2*t*t-zpos*zpos));
347 zpos = zpos - zSenStrip/TMath::Cos(ang);
348 printf("NEXT Distance from the bound of the FLT3: zFLT3- %f cm \n", zpos+(zSenStrip/2)/TMath::Cos(ang));
349 printf("#######################################################\n");
351 ////////// Layers after detector /////////////////
353 // Honeycomb layer after (3cm)
355 Float_t OverSpace = Space + 7.3;
356 /// StripWidth*TMath::Sin(ang) + 1.3;
361 ycoor = -yFLT/2 + OverSpace + par[1];
362 gMC->Gsvolu("FPE1", "BOX ", idtmed[503], par, 3); // Hony
363 gMC->Gspos("FPE1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
364 gMC->Gsvolu("FPE2", "BOX ", idtmed[503], par, 3); // Hony
365 gMC->Gspos("FPE2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
366 gMC->Gsvolu("FPE3", "BOX ", idtmed[503], par, 3); // Hony
367 gMC->Gspos("FPE3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
369 // Electronics (Cu) after
372 par[1] = 1.43*0.05 / 2.; // 5% of X0
375 gMC->Gsvolu("FEC1", "BOX ", idtmed[501], par, 3); // Cu
376 gMC->Gspos("FEC1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
377 gMC->Gsvolu("FEC2", "BOX ", idtmed[501], par, 3); // Cu
378 gMC->Gspos("FEC2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
379 gMC->Gsvolu("FEC3", "BOX ", idtmed[501], par, 3); // Cu
380 gMC->Gspos("FEC3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
382 // Cooling water after
385 par[1] = 36.1*0.02 / 2.; // 2% of X0
388 gMC->Gsvolu("FWA1", "BOX ", idtmed[515], par, 3); // Water
389 gMC->Gspos("FWA1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
390 gMC->Gsvolu("FWA2", "BOX ", idtmed[515], par, 3); // Water
391 gMC->Gspos("FWA2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
392 gMC->Gsvolu("FWA3", "BOX ", idtmed[515], par, 3); // Water
393 gMC->Gspos("FWA3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
395 //back plate honycomb (2cm)
399 ycoor = yFLT/2 - par[1];
400 gMC->Gsvolu("FEG1", "BOX ", idtmed[503], par, 3); // Hony
401 gMC->Gspos("FEG1", 0, "FLT1", 0., ycoor, 0., 0, "ONLY");
402 gMC->Gsvolu("FEG2", "BOX ", idtmed[503], par, 3); // Hony
403 gMC->Gspos("FEG2", 0, "FLT2", 0., ycoor, 0., 0, "ONLY");
404 gMC->Gsvolu("FEG3", "BOX ", idtmed[503], par, 3); // Hony
405 gMC->Gspos("FEG3", 0, "FLT3", 0., ycoor, 0., 0, "ONLY");
408 //_____________________________________________________________________________
409 void AliTOFv3::DrawModule()
412 // Draw a shaded view of the Time Of Flight version 1
414 // Set everything unseen
415 gMC->Gsatt("*", "seen", -1);
417 // Set ALIC mother transparent
418 gMC->Gsatt("ALIC","SEEN",0);
420 // Set the volumes visible
421 gMC->Gsatt("ALIC","SEEN",0);
422 gMC->Gsatt("FBAR","SEEN",1);
423 gMC->Gsatt("FTO1","SEEN",1);
424 gMC->Gsatt("FTO2","SEEN",1);
425 gMC->Gsatt("FTO3","SEEN",1);
426 gMC->Gsatt("FBT1","SEEN",1);
427 gMC->Gsatt("FBT2","SEEN",1);
428 gMC->Gsatt("FBT3","SEEN",1);
429 gMC->Gsatt("FDT1","SEEN",1);
430 gMC->Gsatt("FDT2","SEEN",1);
431 gMC->Gsatt("FDT3","SEEN",1);
432 gMC->Gsatt("FLT1","SEEN",1);
433 gMC->Gsatt("FLT2","SEEN",1);
434 gMC->Gsatt("FLT3","SEEN",1);
435 gMC->Gsatt("FPL1","SEEN",1);
436 gMC->Gsatt("FPL2","SEEN",1);
437 gMC->Gsatt("FPL3","SEEN",1);
438 gMC->Gsatt("FLD1","SEEN",1);
439 gMC->Gsatt("FLD2","SEEN",1);
440 gMC->Gsatt("FLD3","SEEN",1);
441 gMC->Gsatt("FLZ1","SEEN",1);
442 gMC->Gsatt("FLZ2","SEEN",1);
443 gMC->Gsatt("FLZ3","SEEN",1);
444 gMC->Gsatt("FLX1","SEEN",1);
445 gMC->Gsatt("FLX2","SEEN",1);
446 gMC->Gsatt("FLX3","SEEN",1);
447 gMC->Gsatt("FPA0","SEEN",1);
449 gMC->Gdopt("hide", "on");
450 gMC->Gdopt("shad", "on");
451 gMC->Gsatt("*", "fill", 7);
452 gMC->SetClipBox(".");
453 gMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000);
455 gMC->Gdraw("alic", 40, 30, 0, 12, 9.5, .02, .02);
456 gMC->Gdhead(1111, "Time Of Flight");
457 gMC->Gdman(18, 4, "MAN");
458 gMC->Gdopt("hide","off");
461 //_____________________________________________________________________________
462 void AliTOFv3::CreateMaterials()
465 // Define materials for the Time Of Flight
467 AliTOF::CreateMaterials();
470 //_____________________________________________________________________________
471 void AliTOFv3::Init()
474 // Initialise the detector after the geometry has been defined
477 fIdFTO2=gMC->VolId("FTO2");
478 fIdFTO3=gMC->VolId("FTO3");
479 fIdFLT1=gMC->VolId("FLT1");
480 fIdFLT2=gMC->VolId("FLT2");
481 fIdFLT3=gMC->VolId("FLT3");
484 //_____________________________________________________________________________
485 void AliTOFv3::StepManager()
488 // Procedure called at each step in the Time Of Flight
490 TLorentzVector mom, pos;
494 Int_t *idtmed = fIdtmed->GetArray()-499;
495 if(gMC->GetMedium()==idtmed[514-1] &&
496 gMC->IsTrackEntering() && gMC->TrackCharge()
497 && gMC->CurrentVolID(copy)==fIdSens) {
498 TClonesArray &lhits = *fHits;
500 // Record only charged tracks at entrance
501 gMC->CurrentVolOffID(1,copy);
503 gMC->CurrentVolOffID(3,copy);
505 id=gMC->CurrentVolOffID(8,copy);
509 id=gMC->CurrentVolOffID(5,copy);
510 if(id==fIdFLT3) vol[1]+=6;
511 } else if (id==fIdFTO2) {
513 id=gMC->CurrentVolOffID(5,copy);
514 if(id==fIdFLT2) vol[1]+=8;
516 id=gMC->CurrentVolOffID(5,copy);
517 if(id==fIdFLT1) vol[1]+=14;
519 gMC->TrackPosition(pos);
520 gMC->TrackMomentum(mom);
522 Double_t ptot=mom.Rho();
523 Double_t norm=1/ptot;
526 hits[i+3]=mom[i]*norm;
530 new(lhits[fNhits++]) AliTOFhit(fIshunt,gAlice->CurrentTrack(),vol,hits);