1 #ifndef ALITRDMCMSIMCONFIGHANDLER_H
2 #define ALITRDMCMSIMCONFIGHANDLER_H
3 /* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * See cxx source for full Copyright notice */
6 ////////////////////////////////////////////////////////////////
8 // Multi Chip Module Simulation Configuration Handler Class //
10 ////////////////////////////////////////////////////////////////
14 #include "AliTRDltuParam.h"
15 #include "AliTRDCalOnlineGainTable.h"
17 class AliTRDtrapConfig;
19 class AliTRDtrapConfigHandler : public TObject {
21 AliTRDtrapConfigHandler();
22 virtual ~AliTRDtrapConfigHandler();
24 void ResetMCMs(); // Reset all trap registers and DMEM of the MCMs
25 Int_t LoadConfig(); // load a default configuration suitable for simulation
26 Int_t LoadConfig(TString filename); // load a TRAP configuration from a file
27 Int_t SetGaintable(AliTRDCalOnlineGainTable const >bl); // Set a gain table to correct Q0 and Q1 for PID
29 void ProcessLTUparam(Int_t dest, Int_t addr, UInt_t data); // Process the LTU parameters
30 void PrintGeoTest(); // Prints some information about the geometry. Only for debugging
32 // UInt_t peek(Int_t rob, Int_t mcm, Int_t addr); // not implemented yet
33 // Int_t poke(Int_t rob, Int_t mcm, Int_t addr, UInt_t value); // not implemented yet
36 void ConfigureDyCorr(Int_t det); // deflection length correction due to Lorentz angle and tilted pad correction
37 void ConfigureDRange(Int_t det); // deflection range LUT, range calculated according to B-field (in T) and pt_min (in GeV/c)
38 void ConfigureNTimebins(Int_t det); // timebins in the drift region
39 void ConfigurePIDcorr(Int_t det); // Calculate the mcm individual correction factors for the PID
41 Double_t Square(Double_t val) const { return val*val; }; // returns the square of a given number
43 AliTRDtrapConfigHandler(const AliTRDtrapConfigHandler &h); // not implemented
44 AliTRDtrapConfigHandler &operator=(const AliTRDtrapConfigHandler &h); // not implemented
46 static const UInt_t fgkScsnCmdReset=6; // SCSN command for reset
47 static const UInt_t fgkScsnCmdPause=8; // SCSN command to pause
48 static const UInt_t fgkScsnCmdRead=9; // SCSN command to read
49 static const UInt_t fgkScsnCmdWrite=10; // SCSN command to write
50 static const UInt_t fgkScsnCmdPtrg=12; // SCSN command for pretrigger
51 static const UInt_t fgkScsnCmdRobPower=16; // SCSN command to switch ROB power
52 static const UInt_t fgkScsnCmdRobReset=17; // SCSN command for ROB reset
54 static const UInt_t fgkScsnCmdRestr=18; // SCSN command to restrict commands to specified chambers
55 static const UInt_t fgkScsnCmdTtcRx=19; // SCSN command to configure TTCrx
56 static const UInt_t fgkScsnCmdHwPtrg=20; // SCSN command to issue pretrigger pulse
57 static const UInt_t fgkScsnCmdSetHC=22; // SCSN command to set HC ID
58 static const UInt_t fgkScsnCmdMcmTemp=24; // SCSN command for MCM temperature sensors
59 static const UInt_t fgkScsnCmdPM=25; // SCSN command for patchmaker
60 static const UInt_t fgkScsnCmdOri=26; // SCSN command for ORI configuration
61 static const UInt_t fgkScsnLTUparam=27; // extended SCSN command for the LTU configuration
63 static const Int_t fgkMCMperROBCol = 4; // MCMs per ROB column
64 static const Int_t fgkPadsPerMCM = 18; // readout pads per MCM
65 static const Int_t fgkMCMperROBRow = 4; // MCMs per ROB row
67 AliTRDltuParam ltuParam; // ltuParam class for the actual calculation of the parameters
69 UInt_t fRestrictiveMask; // mask to restrict subsequent commands to specified chambers
71 AliTRDCalOnlineGainTable fGtbl; // gain table
73 ClassDef(AliTRDtrapConfigHandler,0)