TRD/TRDbase/AliTRDgeometry.cxx

   1 /**************************************************************************
   2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
   3  *                                                                        *
   4  * Author: The ALICE Off-line Project.                                    *
   5  * Contributors are mentioned in the code where appropriate.              *
   6  *                                                                        *
   7  * Permission to use, copy, modify and distribute this software and its   *
   8  * documentation strictly for non-commercial purposes is hereby granted   *
   9  * without fee, provided that the above copyright notice appears in all   *
  10  * copies and that both the copyright notice and this permission notice   *
  11  * appear in the supporting documentation. The authors make no claims     *
  12  * about the suitability of this software for any purpose. It is          *
  13  * provided "as is" without express or implied warranty.                  *
  14  **************************************************************************/
  15
  16 /* $Id$ */
  17
  18 ///////////////////////////////////////////////////////////////////////////////
  19 //                                                                           //
  20 //  TRD geometry class                                                       //
  21 //                                                                           //
  22 ///////////////////////////////////////////////////////////////////////////////
  23
  24 #include <TGeoManager.h>
  25 #include <TGeoPhysicalNode.h>
  26 #include <TVirtualMC.h>
  27 #include <TMath.h>
  28
  29 #include "AliLog.h"
  30 #include "AliAlignObjParams.h"
  31
  32 #include "AliTRDgeometry.h"
  33 #include "AliTRDpadPlane.h"
  34
  35 ClassImp(AliTRDgeometry)
  36
  37 //_____________________________________________________________________________
  38
  39   //
  40   // The geometry constants
  41   //
  42   const Int_t    AliTRDgeometry::fgkNsector   = kNsector;
  43   const Int_t    AliTRDgeometry::fgkNlayer    = kNlayer;
  44   const Int_t    AliTRDgeometry::fgkNstack    = kNstack;
  45   const Int_t    AliTRDgeometry::fgkNdet      = kNdet;
  46
  47   //
  48   // Dimensions of the detector
  49   //
  50
  51   // Total length of the TRD mother volume
  52   const Float_t  AliTRDgeometry::fgkTlength   = 751.0;
  53
  54   // Parameter of the super module mother volumes
  55   const Float_t  AliTRDgeometry::fgkSheight   =  77.9;
  56   const Float_t  AliTRDgeometry::fgkSwidth1   =  94.881;
  57   const Float_t  AliTRDgeometry::fgkSwidth2   = 122.353;
  58   const Float_t  AliTRDgeometry::fgkSlength   = 702.0;
  59
  60   // Length of the additional space in front of the supermodule
  61   // used for services
  62   const Float_t  AliTRDgeometry::fgkFlength   = (AliTRDgeometry::fgkTlength
  63                                                - AliTRDgeometry::fgkSlength) / 2.0;
  64
  65   // The super module side plates
  66   const Float_t  AliTRDgeometry::fgkSMpltT    =   0.2;
  67
  68   // Vertical spacing of the chambers
  69   const Float_t  AliTRDgeometry::fgkVspace    =   1.784;
  70   // Horizontal spacing of the chambers
  71   const Float_t  AliTRDgeometry::fgkHspace    =   2.0;
  72   // Radial distance of the first ROC to the outer plates of the SM
  73   const Float_t  AliTRDgeometry::fgkVrocsm    =   1.2;
  74
  75   // Height of different chamber parts
  76   // Radiator
  77   const Float_t  AliTRDgeometry::fgkCraH      =   4.8;
  78   // Drift region
  79   const Float_t  AliTRDgeometry::fgkCdrH      =   3.0;
  80   // Amplification region
  81   const Float_t  AliTRDgeometry::fgkCamH      =   0.7;
  82   // Readout
  83   const Float_t  AliTRDgeometry::fgkCroH      =   2.316;
  84   // Additional width of the readout chamber frames
  85   const Float_t  AliTRDgeometry::fgkCroW      =   0.9;
  86   // Services on top of ROC
  87   const Float_t  AliTRDgeometry::fgkCsvH      = AliTRDgeometry::fgkVspace
  88                                               -   0.742;
  89   // Total height (w/o services)
  90   const Float_t  AliTRDgeometry::fgkCH        = AliTRDgeometry::fgkCraH
  91                                               + AliTRDgeometry::fgkCdrH
  92                                               + AliTRDgeometry::fgkCamH
  93                                               + AliTRDgeometry::fgkCroH;
  94   // Total height (with services)
  95
  96   const Float_t  AliTRDgeometry::fgkCHsv      = AliTRDgeometry::fgkCH
  97                                               + AliTRDgeometry::fgkCsvH;
  98
  99   // Distance of anode wire plane relative to middle of alignable volume
 100   const Float_t  AliTRDgeometry::fgkAnodePos  = AliTRDgeometry::fgkCraH
 101                                               + AliTRDgeometry::fgkCdrH
 102                                               + AliTRDgeometry::fgkCamH/2.0
 103                                               - AliTRDgeometry::fgkCHsv/2.0;
 104
 105   // Thicknesses of different parts of the chamber frame
 106   // Lower aluminum frame
 107   const Float_t  AliTRDgeometry::fgkCalT      =   0.4;
 108   // Lower Wacosit frame sides
 109   const Float_t  AliTRDgeometry::fgkCclsT     =   0.21;
 110   // Lower Wacosit frame front
 111   const Float_t  AliTRDgeometry::fgkCclfT     =   1.0;
 112   // Thickness of glue around radiator
 113   const Float_t  AliTRDgeometry::fgkCglT      =   0.25;
 114   // Upper Wacosit frame around amplification region
 115   const Float_t  AliTRDgeometry::fgkCcuTa     =   1.0;
 116   const Float_t  AliTRDgeometry::fgkCcuTb     =   0.8;
 117   // Al frame of back panel
 118   const Float_t  AliTRDgeometry::fgkCauT      =   1.5;
 119   // Additional Al ledge at the lower chamber frame
 120   // Actually the dimensions are not realistic, but
 121   // modified in order to allow to mis-alignment.
 122   // The amount of material is, however, correct
 123   const Float_t  AliTRDgeometry::fgkCalW      =   2.5;
 124   const Float_t  AliTRDgeometry::fgkCalH      =   0.4;
 125   const Float_t  AliTRDgeometry::fgkCalWmod   =   0.4;
 126   const Float_t  AliTRDgeometry::fgkCalHmod   =   2.5;
 127   // Additional Wacosit ledge at the lower chamber frame
 128   const Float_t  AliTRDgeometry::fgkCwsW      =   1.2;
 129   const Float_t  AliTRDgeometry::fgkCwsH      =   0.3;
 130
 131   // Difference of outer chamber width and pad plane width
 132   const Float_t  AliTRDgeometry::fgkCpadW     =   0.0;
 133   const Float_t  AliTRDgeometry::fgkRpadW     =   1.0;
 134
 135   //
 136   // Thickness of the the material layers
 137   //
 138   const Float_t  AliTRDgeometry::fgkDrThick   = AliTRDgeometry::fgkCdrH;
 139   const Float_t  AliTRDgeometry::fgkAmThick   = AliTRDgeometry::fgkCamH;
 140   const Float_t  AliTRDgeometry::fgkXeThick   = AliTRDgeometry::fgkDrThick
 141                                               + AliTRDgeometry::fgkAmThick;
 142   const Float_t  AliTRDgeometry::fgkWrThick   = 0.00011;
 143
 144   const Float_t  AliTRDgeometry::fgkRMyThick  = 0.0015;
 145   const Float_t  AliTRDgeometry::fgkRCbThick  = 0.0055;
 146   const Float_t  AliTRDgeometry::fgkRGlThick  = 0.0065;
 147   const Float_t  AliTRDgeometry::fgkRRhThick  = 0.8;
 148   const Float_t  AliTRDgeometry::fgkRFbThick  = fgkCraH - 2.0 * (fgkRMyThick
 149                                                                + fgkRCbThick
 150                                                                + fgkRRhThick);
 151
 152   const Float_t  AliTRDgeometry::fgkPPdThick  = 0.0025;
 153   const Float_t  AliTRDgeometry::fgkPPpThick  = 0.0356;
 154   const Float_t  AliTRDgeometry::fgkPGlThick  = 0.1428;
 155   const Float_t  AliTRDgeometry::fgkPCbThick  = 0.019;
 156   const Float_t  AliTRDgeometry::fgkPPcThick  = 0.0486;
 157   const Float_t  AliTRDgeometry::fgkPRbThick  = 0.0057;
 158   const Float_t  AliTRDgeometry::fgkPElThick  = 0.0029;
 159   const Float_t  AliTRDgeometry::fgkPHcThick  = fgkCroH - fgkPPdThick
 160                                                         - fgkPPpThick
 161                                                         - fgkPGlThick
 162                                                         - fgkPCbThick * 2.0
 163                                                         - fgkPPcThick
 164                                                         - fgkPRbThick
 165                                                         - fgkPElThick;
 166
 167   //
 168   // Position of the material layers
 169   //
 170   const Float_t  AliTRDgeometry::fgkDrZpos    =  2.4;
 171   const Float_t  AliTRDgeometry::fgkAmZpos    =  0.0;
 172   const Float_t  AliTRDgeometry::fgkWrZposA   =  0.0;
 173   const Float_t  AliTRDgeometry::fgkWrZposB   = -fgkAmThick/2.0 + 0.001;
 174   const Float_t  AliTRDgeometry::fgkCalZpos   =  0.3;
 175
 176   const Int_t    AliTRDgeometry::fgkMCMmax    = 16;
 177   const Int_t    AliTRDgeometry::fgkMCMrow    = 4;
 178   const Int_t    AliTRDgeometry::fgkROBmaxC0  = 6;
 179   const Int_t    AliTRDgeometry::fgkROBmaxC1  = 8;
 180   const Int_t    AliTRDgeometry::fgkADCmax    = 21;
 181   const Int_t    AliTRDgeometry::fgkTBmax     = 60;
 182   const Int_t    AliTRDgeometry::fgkPadmax    = 18;
 183   const Int_t    AliTRDgeometry::fgkColmax    = 144;
 184   const Int_t    AliTRDgeometry::fgkRowmaxC0  = 12;
 185   const Int_t    AliTRDgeometry::fgkRowmaxC1  = 16;
 186
 187   const Double_t AliTRDgeometry::fgkTime0Base = 300.65;
 188   const Float_t  AliTRDgeometry::fgkTime0[6]  = { static_cast<Float_t>(fgkTime0Base + 0 * (Cheight() + Cspace()))
 189                                                 , static_cast<Float_t>(fgkTime0Base + 1 * (Cheight() + Cspace()))
 190                                                 , static_cast<Float_t>(fgkTime0Base + 2 * (Cheight() + Cspace()))
 191                                                 , static_cast<Float_t>(fgkTime0Base + 3 * (Cheight() + Cspace()))
 192                                                 , static_cast<Float_t>(fgkTime0Base + 4 * (Cheight() + Cspace()))
 193                                                 , static_cast<Float_t>(fgkTime0Base + 5 * (Cheight() + Cspace()))};
 194
 195   const Double_t AliTRDgeometry::fgkXtrdBeg   = 288.43; // Values depend on position of TRD
 196   const Double_t AliTRDgeometry::fgkXtrdEnd   = 366.33; // mother volume inside space frame !!!
 197
 198   // The outer width of the chambers
 199   const Float_t AliTRDgeometry::fgkCwidth[kNlayer] = {  90.4,  94.8,  99.3, 103.7, 108.1, 112.6 };
 200
 201   // The outer lengths of the chambers
 202   // Includes the spacings between the chambers!
 203   const Float_t AliTRDgeometry::fgkClength[kNlayer][kNstack] = { { 124.0, 124.0, 110.0, 124.0, 124.0 }
 204                                                                , { 124.0, 124.0, 110.0, 124.0, 124.0 }
 205                                                                , { 131.0, 131.0, 110.0, 131.0, 131.0 }
 206                                                                , { 138.0, 138.0, 110.0, 138.0, 138.0 }
 207                                                                , { 145.0, 145.0, 110.0, 145.0, 145.0 }
 208                                                                , { 147.0, 147.0, 110.0, 147.0, 147.0 } };
 209
 210         Char_t  AliTRDgeometry::fgSMstatus[kNsector]         = { 1, 1, 1, 1, 1, 1, 1, 1, 1
 211                                                                , 1, 1, 1, 1, 1, 1, 1, 1, 1 };
 212
 213   TObjArray* AliTRDgeometry::fgClusterMatrixArray = NULL;
 214
 215   TObjArray* AliTRDgeometry::fgPadPlaneArray = NULL;
 216
 217 //_____________________________________________________________________________
 218 AliTRDgeometry::AliTRDgeometry()
 219 {
 220   //
 221   // AliTRDgeometry default constructor
 222   //
 223
 224 }
 225
 226 //_____________________________________________________________________________
 227 AliTRDgeometry::~AliTRDgeometry()
 228 {
 229   //
 230   // AliTRDgeometry destructor
 231   //
 232
 233 }
 234
 235 //_____________________________________________________________________________
 236 void AliTRDgeometry::CreatePadPlaneArray()
 237 {
 238   //
 239   // Creates the array of AliTRDpadPlane objects
 240   //
 241
 242   if (fgPadPlaneArray)
 243     return;
 244
 245   static TObjArray padPlaneArray(fgkNlayer * fgkNstack);
 246   padPlaneArray.SetOwner(kTRUE);
 247
 248   fgPadPlaneArray = &padPlaneArray;
 249   for (Int_t ilayer = 0; ilayer < fgkNlayer; ilayer++) {
 250     for (Int_t istack = 0; istack < fgkNstack; istack++) {
 251       Int_t ipp = GetDetectorSec(ilayer,istack);
 252       fgPadPlaneArray->AddAt(CreatePadPlane(ilayer,istack),ipp);
 253     }
 254   }
 255
 256 }
 257
 258 //_____________________________________________________________________________
 259 AliTRDpadPlane *AliTRDgeometry::CreatePadPlane(Int_t ilayer, Int_t istack)
 260 {
 261   //
 262   // Creates an AliTRDpadPlane object
 263   //
 264
 265   AliTRDpadPlane *padPlane = new AliTRDpadPlane();
 266
 267   padPlane->SetLayer(ilayer);
 268   padPlane->SetStack(istack);
 269
 270   padPlane->SetRowSpacing(0.0);
 271   padPlane->SetColSpacing(0.0);
 272
 273   padPlane->SetLengthRim(1.0);
 274   padPlane->SetWidthRim(0.5);
 275
 276   padPlane->SetNcols(144);
 277
 278   padPlane->SetAnodeWireOffset(0.25);
 279
 280   //
 281   // The pad plane parameter
 282   //
 283   const Float_t kTiltAngle = 2.0;
 284   switch (ilayer) {
 285   case 0:
 286     if (istack == 2) {
 287       // L0C0 type
 288       padPlane->SetNrows(12);
 289       padPlane->SetLength(108.0);
 290       padPlane->SetLengthOPad(8.0);
 291       padPlane->SetLengthIPad(9.0);
 292     }
 293     else {
 294       // L0C1 type
 295       padPlane->SetNrows(16);
 296       padPlane->SetLength(122.0);
 297       padPlane->SetLengthOPad(7.5);
 298       padPlane->SetLengthIPad(7.5);
 299     }
 300     padPlane->SetWidth(92.2);
 301     padPlane->SetWidthOPad(0.515);
 302     padPlane->SetWidthIPad(0.635);
 303     padPlane->SetTiltingAngle(-kTiltAngle);
 304     break;
 305   case 1:
 306     if (istack == 2) {
 307       // L1C0 type
 308       padPlane->SetNrows(12);
 309       padPlane->SetLength(108.0);
 310       padPlane->SetLengthOPad(8.0);
 311       padPlane->SetLengthIPad(9.0);
 312     }
 313     else {
 314       // L1C1 type
 315       padPlane->SetNrows(16);
 316       padPlane->SetLength(122.0);
 317       padPlane->SetLengthOPad(7.5);
 318       padPlane->SetLengthIPad(7.5);
 319     }
 320     padPlane->SetWidth(96.6);
 321     padPlane->SetWidthOPad(0.585);
 322     padPlane->SetWidthIPad(0.665);
 323     padPlane->SetTiltingAngle(kTiltAngle);
 324     break;
 325   case 2:
 326     if (istack == 2) {
 327       // L2C0 type
 328       padPlane->SetNrows(12);
 329       padPlane->SetLength(108.0);
 330       padPlane->SetLengthOPad(8.0);
 331       padPlane->SetLengthIPad(9.0);
 332     }
 333     else {
 334       // L2C1 type
 335       padPlane->SetNrows(16);
 336       padPlane->SetLength(129.0);
 337       padPlane->SetLengthOPad(7.5);
 338       padPlane->SetLengthIPad(8.0);
 339     }
 340     padPlane->SetWidth(101.1);
 341     padPlane->SetWidthOPad(0.705);
 342     padPlane->SetWidthIPad(0.695);
 343     padPlane->SetTiltingAngle(-kTiltAngle);
 344     break;
 345   case 3:
 346     if (istack == 2) {
 347       // L3C0 type
 348       padPlane->SetNrows(12);
 349       padPlane->SetLength(108.0);
 350       padPlane->SetLengthOPad(8.0);
 351       padPlane->SetLengthIPad(9.0);
 352     }
 353     else {
 354       // L3C1 type
 355       padPlane->SetNrows(16);
 356       padPlane->SetLength(136.0);
 357       padPlane->SetLengthOPad(7.5);
 358       padPlane->SetLengthIPad(8.5);
 359     }
 360     padPlane->SetWidth(105.5);
 361     padPlane->SetWidthOPad(0.775);
 362     padPlane->SetWidthIPad(0.725);
 363     padPlane->SetTiltingAngle(kTiltAngle);
 364     break;
 365   case 4:
 366     if (istack == 2) {
 367       // L4C0 type
 368       padPlane->SetNrows(12);
 369       padPlane->SetLength(108.0);
 370       padPlane->SetLengthOPad(8.0);
 371     }
 372     else {
 373       // L4C1 type
 374       padPlane->SetNrows(16);
 375       padPlane->SetLength(143.0);
 376       padPlane->SetLengthOPad(7.5);
 377     }
 378     padPlane->SetWidth(109.9);
 379     padPlane->SetWidthOPad(0.845);
 380     padPlane->SetLengthIPad(9.0);
 381     padPlane->SetWidthIPad(0.755);
 382     padPlane->SetTiltingAngle(-kTiltAngle);
 383     break;
 384   case 5:
 385     if (istack == 2) {
 386       // L5C0 type
 387       padPlane->SetNrows(12);
 388       padPlane->SetLength(108.0);
 389       padPlane->SetLengthOPad(8.0);
 390     }
 391     else {
 392       // L5C1 type
 393       padPlane->SetNrows(16);
 394       padPlane->SetLength(145.0);
 395       padPlane->SetLengthOPad(8.5);
 396     }
 397     padPlane->SetWidth(114.4);
 398     padPlane->SetWidthOPad(0.965);
 399     padPlane->SetLengthIPad(9.0);
 400     padPlane->SetWidthIPad(0.785);
 401     padPlane->SetTiltingAngle(kTiltAngle);
 402     break;
 403   };
 404
 405   //
 406   // The positions of the borders of the pads
 407   //
 408   // Row direction
 409   //
 410   Double_t row = fgkClength[ilayer][istack] / 2.0
 411                - fgkRpadW
 412                - padPlane->GetLengthRim();
 413   for (Int_t ir = 0; ir < padPlane->GetNrows(); ir++) {
 414     padPlane->SetPadRow(ir,row);
 415     row -= padPlane->GetRowSpacing();
 416     if (ir == 0) {
 417       row -= padPlane->GetLengthOPad();
 418     }
 419     else {
 420       row -= padPlane->GetLengthIPad();
 421     }
 422   }
 423   //
 424   // Column direction
 425   //
 426   Double_t col = - fgkCwidth[ilayer] / 2.0
 427                  - fgkCroW
 428                  + padPlane->GetWidthRim();
 429   for (Int_t ic = 0; ic < padPlane->GetNcols(); ic++) {
 430     padPlane->SetPadCol(ic,col);
 431     col += padPlane->GetColSpacing();
 432     if (ic == 0) {
 433       col += padPlane->GetWidthOPad();
 434     }
 435     else {
 436       col += padPlane->GetWidthIPad();
 437     }
 438   }
 439   // Calculate the offset to translate from the local ROC system into
 440   // the local supermodule system, which is used for clusters
 441   Double_t rowTmp = fgkClength[ilayer][0]
 442                   + fgkClength[ilayer][1]
 443                   + fgkClength[ilayer][2] / 2.0;
 444   for (Int_t jstack = 0; jstack < istack; jstack++) {
 445     rowTmp -= fgkClength[ilayer][jstack];
 446   }
 447   padPlane->SetPadRowSMOffset(rowTmp - fgkClength[ilayer][istack]/2.0);
 448
 449   return padPlane;
 450
 451 }
 452
 453 //_____________________________________________________________________________
 454 void AliTRDgeometry::CreateGeometry(Int_t *idtmed)
 455 {
 456   //
 457   // Create the TRD geometry
 458   //
 459   //
 460   // Names of the TRD volumina (xx = detector number):
 461   //
 462   //   Volume (Air) wrapping the readout chamber components
 463   //     UTxx    includes: UAxx, UDxx, UFxx, UUxx
 464   //
 465   //   Lower part of the readout chambers (drift volume + radiator)
 466   //     UAxx    Aluminum frames                (Al)
 467   //
 468   //   Upper part of the readout chambers (readout plane + fee)
 469   //     UDxx    Wacosit frames of amp. region  (Wacosit)
 470   //     UFxx    Aluminum frame of back panel   (Al)
 471   //
 472   //   Services on chambers (cooling, cables, MCMs, DCS boards, ...)
 473   //     UUxx    Volume containing the services (Air)
 474   //
 475   //   Material layers inside sensitive area:
 476   //     Name    Description                     Mat.      Thick.   Dens.    Radl.    X/X_0
 477   //
 478   //     URMYxx  Mylar layers (x2)               Mylar     0.0015   1.39     28.5464  0.005%
 479   //     URCBxx  Carbon layer (x2)               Carbon    0.0055   1.75     24.2824  0.023%
 480   //     URGLxx  Glue on the carbon layers (x2)  Araldite  0.0065   1.12     37.0664  0.018%
 481   //     URRHxx  Rohacell layer (x2)             Rohacell  0.8      0.075    536.005  0.149%
 482   //     URFBxx  Fiber mat layer                 PP        3.186    0.068    649.727  0.490%
 483   //
 484   //     UJxx    Drift region                    Xe/CO2    3.0      0.00495  1792.37  0.167%
 485   //     UKxx    Amplification region            Xe/CO2    0.7      0.00495  1792.37  0.039%
 486   //     UWxx    Wire planes (x2)                Copper    0.00011  8.96     1.43503  0.008%
 487   //
 488   //     UPPDxx  Copper of pad plane             Copper    0.0025   8.96     1.43503  0.174%
 489   //     UPPPxx  PCB of pad plane                G10       0.0356   2.0      14.9013  0.239%
 490   //     UPGLxx  Glue on pad planes              Araldite  0.0923   1.12     37.0664  0.249%
 491   //             + add. glue (ca. 600g)          Araldite  0.0505   1.12     37.0663  0.107%
 492   //     UPCBxx  Carbon fiber mats (x2)          Carbon    0.019    1.75     24.2824  0.078%
 493   //     UPHCxx  Honeycomb structure             Aramide   2.0299   0.032    1198.84  0.169%
 494   //     UPPCxx  PCB of readout board            G10       0.0486   2.0      14.9013  0.326%
 495   //     UPRDxx  Copper of readout board         Copper    0.0057   8.96     1.43503  0.404%
 496   //     UPELxx  Electronics + cables            Copper    0.0029   8.96     1.43503  0.202%
 497   //
 498
 499   const Int_t kNparTrd = 4;
 500   const Int_t kNparCha = 3;
 501
 502   Float_t xpos;
 503   Float_t ypos;
 504   Float_t zpos;
 505
 506   Float_t parTrd[kNparTrd];
 507   Float_t parCha[kNparCha];
 508
 509   const Int_t kTag = 100;
 510   Char_t  cTagV[kTag];
 511   Char_t  cTagM[kTag];
 512
 513   // There are three TRD volumes for the supermodules in order to accomodate
 514   // the different arrangements in front of PHOS
 515   // UTR1: Default supermodule
 516   // UTR2: Supermodule in front of PHOS with double carbon cover
 517   // UTR3: As UTR2, but w/o middle stack
 518   // UTR4: Sector 17 with missing chamber L4S4
 519   //
 520   // The mother volume for one sector (Air), full length in z-direction
 521   // Provides material for side plates of super module
 522   parTrd[0] = fgkSwidth1/2.0;
 523   parTrd[1] = fgkSwidth2/2.0;
 524   parTrd[2] = fgkSlength/2.0;
 525   parTrd[3] = fgkSheight/2.0;
 526   TVirtualMC::GetMC()->Gsvolu("UTR1","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 527   TVirtualMC::GetMC()->Gsvolu("UTR2","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 528   TVirtualMC::GetMC()->Gsvolu("UTR3","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 529   TVirtualMC::GetMC()->Gsvolu("UTR4","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 530   // The outer aluminum plates of the super module (Al)
 531   parTrd[0] = fgkSwidth1/2.0;
 532   parTrd[1] = fgkSwidth2/2.0;
 533   parTrd[2] = fgkSlength/2.0;
 534   parTrd[3] = fgkSheight/2.0;
 535   TVirtualMC::GetMC()->Gsvolu("UTS1","TRD1",idtmed[1301-1],parTrd,kNparTrd);
 536   TVirtualMC::GetMC()->Gsvolu("UTS2","TRD1",idtmed[1301-1],parTrd,kNparTrd);
 537   TVirtualMC::GetMC()->Gsvolu("UTS3","TRD1",idtmed[1301-1],parTrd,kNparTrd);
 538   TVirtualMC::GetMC()->Gsvolu("UTS4","TRD1",idtmed[1301-1],parTrd,kNparTrd);
 539   // The inner part of the TRD mother volume for one sector (Air),
 540   // full length in z-direction
 541   parTrd[0] = fgkSwidth1/2.0 - fgkSMpltT;
 542   parTrd[1] = fgkSwidth2/2.0 - fgkSMpltT;
 543   parTrd[2] = fgkSlength/2.0;
 544   parTrd[3] = fgkSheight/2.0 - fgkSMpltT;
 545   TVirtualMC::GetMC()->Gsvolu("UTI1","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 546   TVirtualMC::GetMC()->Gsvolu("UTI2","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 547   TVirtualMC::GetMC()->Gsvolu("UTI3","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 548   TVirtualMC::GetMC()->Gsvolu("UTI4","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 549
 550   // The inner part of the TRD mother volume for services in front
 551   // of the supermodules  (Air),
 552   parTrd[0] = fgkSwidth1/2.0;
 553   parTrd[1] = fgkSwidth2/2.0;
 554   parTrd[2] = fgkFlength/2.0;
 555   parTrd[3] = fgkSheight/2.0;
 556   TVirtualMC::GetMC()->Gsvolu("UTF1","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 557   TVirtualMC::GetMC()->Gsvolu("UTF2","TRD1",idtmed[1302-1],parTrd,kNparTrd);
 558
 559   for (Int_t istack = 0; istack < kNstack; istack++) {
 560     for (Int_t ilayer = 0; ilayer < kNlayer; ilayer++) {
 561
 562       Int_t iDet = GetDetectorSec(ilayer,istack);
 563
 564       // The lower part of the readout chambers (drift volume + radiator)
 565       // The aluminum frames
 566       snprintf(cTagV,kTag,"UA%02d",iDet);
 567       parCha[0] = fgkCwidth[ilayer]/2.0;
 568       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0;
 569       parCha[2] = fgkCraH/2.0 + fgkCdrH/2.0;
 570       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha);
 571       // The additional aluminum on the frames
 572       // This part has not the correct shape but is just supposed to
 573       // represent the missing material. The correct form of the L-shaped
 574       // profile would not fit into the alignable volume.
 575       snprintf(cTagV,kTag,"UZ%02d",iDet);
 576       parCha[0] = fgkCalWmod/2.0;
 577       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0;
 578       parCha[2] = fgkCalHmod/2.0;
 579       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha);
 580       // The additional Wacosit on the frames
 581       snprintf(cTagV,kTag,"UP%02d",iDet);
 582       parCha[0] = fgkCwsW/2.0;
 583       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0;
 584       parCha[2] = fgkCwsH/2.0;
 585       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha);
 586       // The Wacosit frames
 587       snprintf(cTagV,kTag,"UB%02d",iDet);
 588       parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT;
 589       parCha[1] = -1.0;
 590       parCha[2] = -1.0;
 591       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha);
 592       // The glue around the radiator
 593       snprintf(cTagV,kTag,"UX%02d",iDet);
 594       parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT;
 595       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT;
 596       parCha[2] = fgkCraH/2.0;
 597       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha);
 598       // The inner part of radiator (air)
 599       snprintf(cTagV,kTag,"UC%02d",iDet);
 600       parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT - fgkCglT;
 601       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT - fgkCglT;
 602       parCha[2] = -1.0;
 603       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha);
 604
 605       // The upper part of the readout chambers (amplification volume)
 606       // The Wacosit frames
 607       snprintf(cTagV,kTag,"UD%02d",iDet);
 608       parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW;
 609       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0;
 610       parCha[2] = fgkCamH/2.0;
 611       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1307-1],parCha,kNparCha);
 612       // The inner part of the Wacosit frame (air)
 613       snprintf(cTagV,kTag,"UE%02d",iDet);
 614       parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW - fgkCcuTb;
 615       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCcuTa;
 616       parCha[2] = -1.;
 617       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha);
 618
 619       // The back panel, including pad plane and readout boards
 620       // The aluminum frames
 621       snprintf(cTagV,kTag,"UF%02d",iDet);
 622       parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW;
 623       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0;
 624       parCha[2] = fgkCroH/2.0;
 625       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parCha,kNparCha);
 626       // The inner part of the aluminum frames
 627       snprintf(cTagV,kTag,"UG%02d",iDet);
 628       parCha[0] = fgkCwidth[ilayer]/2.0 + fgkCroW - fgkCauT;
 629       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCauT;
 630       parCha[2] = -1.0;
 631       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parCha,kNparCha);
 632
 633       //
 634       // The material layers inside the chambers
 635       //
 636
 637       // Mylar layer (radiator)
 638       parCha[0] = -1.0;
 639       parCha[1] = -1.0;
 640       parCha[2] = fgkRMyThick/2.0;
 641       snprintf(cTagV,kTag,"URMY%02d",iDet);
 642       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1327-1],parCha,kNparCha);
 643       // Carbon layer (radiator)
 644       parCha[0] = -1.0;
 645       parCha[1] = -1.0;
 646       parCha[2] = fgkRCbThick/2.0;
 647       snprintf(cTagV,kTag,"URCB%02d",iDet);
 648       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1326-1],parCha,kNparCha);
 649       // Araldite layer (radiator)
 650       parCha[0] = -1.0;
 651       parCha[1] = -1.0;
 652       parCha[2] = fgkRGlThick/2.0;
 653       snprintf(cTagV,kTag,"URGL%02d",iDet);
 654       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha);
 655       // Rohacell layer (radiator)
 656       parCha[0] = -1.0;
 657       parCha[1] = -1.0;
 658       parCha[2] = fgkRRhThick/2.0;
 659       snprintf(cTagV,kTag,"URRH%02d",iDet);
 660       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1315-1],parCha,kNparCha);
 661       // Fiber layer (radiator)
 662       parCha[0] = -1.0;
 663       parCha[1] = -1.0;
 664       parCha[2] = fgkRFbThick/2.0;
 665       snprintf(cTagV,kTag,"URFB%02d",iDet);
 666       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1328-1],parCha,kNparCha);
 667
 668       // Xe/Isobutane layer (drift volume)
 669       parCha[0] = fgkCwidth[ilayer]/2.0 - fgkCalT - fgkCclsT;
 670       parCha[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0 - fgkCclfT;
 671       parCha[2] = fgkDrThick/2.0;
 672       snprintf(cTagV,kTag,"UJ%02d",iDet);
 673       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha);
 674
 675       // Xe/Isobutane layer (amplification volume)
 676       parCha[0] = -1.0;
 677       parCha[1] = -1.0;
 678       parCha[2] = fgkAmThick/2.0;
 679       snprintf(cTagV,kTag,"UK%02d",iDet);
 680       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1309-1],parCha,kNparCha);
 681       // Cu layer (wire plane)
 682       parCha[0] = -1.0;
 683       parCha[1] = -1.0;
 684       parCha[2] = fgkWrThick/2.0;
 685       snprintf(cTagV,kTag,"UW%02d",iDet);
 686       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1303-1],parCha,kNparCha);
 687
 688       // Cu layer (pad plane)
 689       parCha[0] = -1.0;
 690       parCha[1] = -1.0;
 691       parCha[2] = fgkPPdThick/2.0;
 692       snprintf(cTagV,kTag,"UPPD%02d",iDet);
 693       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1305-1],parCha,kNparCha);
 694       // G10 layer (pad plane)
 695       parCha[0] = -1.0;
 696       parCha[1] = -1.0;
 697       parCha[2] = fgkPPpThick/2.0;
 698       snprintf(cTagV,kTag,"UPPP%02d",iDet);
 699       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1313-1],parCha,kNparCha);
 700       // Araldite layer (glue)
 701       parCha[0] = -1.0;
 702       parCha[1] = -1.0;
 703       parCha[2] = fgkPGlThick/2.0;
 704       snprintf(cTagV,kTag,"UPGL%02d",iDet);
 705       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1311-1],parCha,kNparCha);
 706       // Carbon layer (carbon fiber mats)
 707       parCha[0] = -1.0;
 708       parCha[1] = -1.0;
 709       parCha[2] = fgkPCbThick/2.0;
 710       snprintf(cTagV,kTag,"UPCB%02d",iDet);
 711       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1326-1],parCha,kNparCha);
 712       // Aramide layer (honeycomb)
 713       parCha[0] = -1.0;
 714       parCha[1] = -1.0;
 715       parCha[2] = fgkPHcThick/2.0;
 716       snprintf(cTagV,kTag,"UPHC%02d",iDet);
 717       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1310-1],parCha,kNparCha);
 718       // G10 layer (PCB readout board)
 719       parCha[0] = -1.0;
 720       parCha[1] = -1.0;
 721       parCha[2] = fgkPPcThick/2;
 722       snprintf(cTagV,kTag,"UPPC%02d",iDet);
 723       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1313-1],parCha,kNparCha);
 724       // Cu layer (traces in readout board)
 725       parCha[0] = -1.0;
 726       parCha[1] = -1.0;
 727       parCha[2] = fgkPRbThick/2.0;
 728       snprintf(cTagV,kTag,"UPRB%02d",iDet);
 729       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1306-1],parCha,kNparCha);
 730       // Cu layer (other material on in readout board, incl. screws)
 731       parCha[0] = -1.0;
 732       parCha[1] = -1.0;
 733       parCha[2] = fgkPElThick/2.0;
 734       snprintf(cTagV,kTag,"UPEL%02d",iDet);
 735       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1304-1],parCha,kNparCha);
 736
 737       //
 738       // Position the layers in the chambers
 739       //
 740       xpos = 0.0;
 741       ypos = 0.0;
 742
 743       // Lower part
 744       // Mylar layers (radiator)
 745       zpos =  fgkRMyThick/2.0 - fgkCraH/2.0;
 746       snprintf(cTagV,kTag,"URMY%02d",iDet);
 747       snprintf(cTagM,kTag,"UC%02d",iDet);
 748       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 749       zpos = -fgkRMyThick/2.0 + fgkCraH/2.0;
 750       snprintf(cTagV,kTag,"URMY%02d",iDet);
 751       snprintf(cTagM,kTag,"UC%02d",iDet);
 752       TVirtualMC::GetMC()->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY");
 753       // Carbon layers (radiator)
 754       zpos =  fgkRCbThick/2.0 + fgkRMyThick - fgkCraH/2.0;
 755       snprintf(cTagV,kTag,"URCB%02d",iDet);
 756       snprintf(cTagM,kTag,"UC%02d",iDet);
 757       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 758       zpos = -fgkRCbThick/2.0 - fgkRMyThick + fgkCraH/2.0;
 759       snprintf(cTagV,kTag,"URCB%02d",iDet);
 760       snprintf(cTagM,kTag,"UC%02d",iDet);
 761       TVirtualMC::GetMC()->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY");
 762       // Carbon layers (radiator)
 763       zpos =  fgkRGlThick/2.0 + fgkRCbThick + fgkRMyThick - fgkCraH/2.0;
 764       snprintf(cTagV,kTag,"URGL%02d",iDet);
 765       snprintf(cTagM,kTag,"UC%02d",iDet);
 766       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 767       zpos = -fgkRGlThick/2.0 - fgkRCbThick - fgkRMyThick + fgkCraH/2.0;
 768       snprintf(cTagV,kTag,"URGL%02d",iDet);
 769       snprintf(cTagM,kTag,"UC%02d",iDet);
 770       TVirtualMC::GetMC()->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY");
 771       // Rohacell layers (radiator)
 772       zpos =  fgkRRhThick/2.0 + fgkRGlThick + fgkRCbThick + fgkRMyThick - fgkCraH/2.0;
 773       snprintf(cTagV,kTag,"URRH%02d",iDet);
 774       snprintf(cTagM,kTag,"UC%02d",iDet);
 775       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 776       zpos = -fgkRRhThick/2.0 - fgkRGlThick - fgkRCbThick - fgkRMyThick + fgkCraH/2.0;
 777       snprintf(cTagV,kTag,"URRH%02d",iDet);
 778       snprintf(cTagM,kTag,"UC%02d",iDet);
 779       TVirtualMC::GetMC()->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY");
 780       // Fiber layers (radiator)
 781       zpos =  0.0;
 782       snprintf(cTagV,kTag,"URFB%02d",iDet);
 783       snprintf(cTagM,kTag,"UC%02d",iDet);
 784       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 785
 786       // Xe/Isobutane layer (drift volume)
 787       zpos = fgkDrZpos;
 788       snprintf(cTagV,kTag,"UJ%02d",iDet);
 789       snprintf(cTagM,kTag,"UB%02d",iDet);
 790       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 791
 792       // Upper part
 793       // Xe/Isobutane layer (amplification volume)
 794       zpos = fgkAmZpos;
 795       snprintf(cTagV,kTag,"UK%02d",iDet);
 796       snprintf(cTagM,kTag,"UE%02d",iDet);
 797       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 798       // Cu layer (wire planes inside amplification volume)
 799       zpos = fgkWrZposA;
 800       snprintf(cTagV,kTag,"UW%02d",iDet);
 801       snprintf(cTagM,kTag,"UK%02d",iDet);
 802       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 803       zpos = fgkWrZposB;
 804       snprintf(cTagV,kTag,"UW%02d",iDet);
 805       snprintf(cTagM,kTag,"UK%02d",iDet);
 806       TVirtualMC::GetMC()->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY");
 807
 808       // Back panel + pad plane + readout part
 809       // Cu layer (pad plane)
 810       zpos =  fgkPPdThick/2.0 - fgkCroH/2.0;
 811       snprintf(cTagV,kTag,"UPPD%02d",iDet);
 812       snprintf(cTagM,kTag,"UG%02d",iDet);
 813       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 814       // G10  layer (pad plane)
 815       zpos =  fgkPPpThick/2.0 + fgkPPdThick - fgkCroH/2.0;
 816       snprintf(cTagV,kTag,"UPPP%02d",iDet);
 817       snprintf(cTagM,kTag,"UG%02d",iDet);
 818       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 819       // Araldite layer (glue)
 820       zpos =  fgkPGlThick/2.0 + fgkPPpThick + fgkPPdThick - fgkCroH/2.0;
 821       snprintf(cTagV,kTag,"UPGL%02d",iDet);
 822       snprintf(cTagM,kTag,"UG%02d",iDet);
 823       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 824       // Carbon layers (carbon fiber mats)
 825       zpos =  fgkPCbThick/2.0 + fgkPGlThick + fgkPPpThick + fgkPPdThick - fgkCroH/2.0;
 826       snprintf(cTagV,kTag,"UPCB%02d",iDet);
 827       snprintf(cTagM,kTag,"UG%02d",iDet);
 828       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 829       zpos = -fgkPCbThick/2.0 - fgkPPcThick - fgkPRbThick - fgkPElThick + fgkCroH/2.0;
 830       snprintf(cTagV,kTag,"UPCB%02d",iDet);
 831       snprintf(cTagM,kTag,"UG%02d",iDet);
 832       TVirtualMC::GetMC()->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY");
 833       // Aramide layer (honeycomb)
 834       zpos =  fgkPHcThick/2.0 + fgkPCbThick + fgkPGlThick + fgkPPpThick + fgkPPdThick - fgkCroH/2.0;
 835       snprintf(cTagV,kTag,"UPHC%02d",iDet);
 836       snprintf(cTagM,kTag,"UG%02d",iDet);
 837       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 838       // G10 layer (PCB readout board)
 839       zpos = -fgkPPcThick/2.0 - fgkPRbThick - fgkPElThick + fgkCroH/2.0;
 840       snprintf(cTagV,kTag,"UPPC%02d",iDet);
 841       snprintf(cTagM,kTag,"UG%02d",iDet);
 842       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 843       // Cu layer (traces in readout board)
 844       zpos = -fgkPRbThick/2.0 - fgkPElThick + fgkCroH/2.0;
 845       snprintf(cTagV,kTag,"UPRB%02d",iDet);
 846       snprintf(cTagM,kTag,"UG%02d",iDet);
 847       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 848       // Cu layer (other materials on readout board, incl. screws)
 849       zpos = -fgkPElThick/2.0 + fgkCroH/2.0;
 850       snprintf(cTagV,kTag,"UPEL%02d",iDet);
 851       snprintf(cTagM,kTag,"UG%02d",iDet);
 852       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 853
 854       // Position the inner volumes of the chambers in the frames
 855       xpos = 0.0;
 856       ypos = 0.0;
 857
 858       // The inner part of the radiator (air)
 859       zpos = 0.0;
 860       snprintf(cTagV,kTag,"UC%02d",iDet);
 861       snprintf(cTagM,kTag,"UX%02d",iDet);
 862       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 863       // The glue around the radiator
 864       zpos = fgkCraH/2.0 - fgkCdrH/2.0 - fgkCraH/2.0;
 865       snprintf(cTagV,kTag,"UX%02d",iDet);
 866       snprintf(cTagM,kTag,"UB%02d",iDet);
 867       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 868       // The lower Wacosit frame inside the aluminum frame
 869       zpos = 0.0;
 870       snprintf(cTagV,kTag,"UB%02d",iDet);
 871       snprintf(cTagM,kTag,"UA%02d",iDet);
 872       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 873
 874       // The inside of the upper Wacosit frame
 875       zpos = 0.0;
 876       snprintf(cTagV,kTag,"UE%02d",iDet);
 877       snprintf(cTagM,kTag,"UD%02d",iDet);
 878       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 879
 880       // The inside of the upper aluminum frame
 881       zpos = 0.0;
 882       snprintf(cTagV,kTag,"UG%02d",iDet);
 883       snprintf(cTagM,kTag,"UF%02d",iDet);
 884       TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
 885
 886     }
 887   }
 888
 889   // Create the volumes of the super module frame
 890   CreateFrame(idtmed);
 891
 892   // Create the volumes of the services
 893   CreateServices(idtmed);
 894
 895   for (Int_t istack = 0; istack < kNstack; istack++) {
 896     for (Int_t ilayer = 0; ilayer < kNlayer; ilayer++) {
 897       AssembleChamber(ilayer,istack);
 898     }
 899   }
 900
 901   xpos = 0.0;
 902   ypos = 0.0;
 903   zpos = 0.0;
 904   TVirtualMC::GetMC()->Gspos("UTI1",1,"UTS1",xpos,ypos,zpos,0,"ONLY");
 905   TVirtualMC::GetMC()->Gspos("UTI2",1,"UTS2",xpos,ypos,zpos,0,"ONLY");
 906   TVirtualMC::GetMC()->Gspos("UTI3",1,"UTS3",xpos,ypos,zpos,0,"ONLY");
 907   TVirtualMC::GetMC()->Gspos("UTI4",1,"UTS4",xpos,ypos,zpos,0,"ONLY");
 908
 909   xpos = 0.0;
 910   ypos = 0.0;
 911   zpos = 0.0;
 912   TVirtualMC::GetMC()->Gspos("UTS1",1,"UTR1",xpos,ypos,zpos,0,"ONLY");
 913   TVirtualMC::GetMC()->Gspos("UTS2",1,"UTR2",xpos,ypos,zpos,0,"ONLY");
 914   TVirtualMC::GetMC()->Gspos("UTS3",1,"UTR3",xpos,ypos,zpos,0,"ONLY");
 915   TVirtualMC::GetMC()->Gspos("UTS4",1,"UTR4",xpos,ypos,zpos,0,"ONLY");
 916
 917   // Put the TRD volumes into the space frame mother volumes
 918   // if enabled via status flag
 919   xpos = 0.0;
 920   ypos = 0.0;
 921   zpos = 0.0;
 922   for (Int_t isector = 0; isector < kNsector; isector++) {
 923     if (GetSMstatus(isector)) {
 924       snprintf(cTagV,kTag,"BTRD%d",isector);
 925       switch (isector) {
 926       case 17:
 927         // Missing L4S4 chamber
 928         TVirtualMC::GetMC()->Gspos("UTR4",1,cTagV,xpos,ypos,zpos,0,"ONLY");
 929         break;
 930       case 13:
 931       case 14:
 932       case 15:
 933         // Double carbon, w/o middle stack
 934         TVirtualMC::GetMC()->Gspos("UTR3",1,cTagV,xpos,ypos,zpos,0,"ONLY");
 935         break;
 936       case 11:
 937       case 12:
 938         // Double carbon, all stacks
 939         TVirtualMC::GetMC()->Gspos("UTR2",1,cTagV,xpos,ypos,zpos,0,"ONLY");
 940         break;
 941       default:
 942         // Standard supermodule
 943         TVirtualMC::GetMC()->Gspos("UTR1",1,cTagV,xpos,ypos,zpos,0,"ONLY");
 944       };
 945     }
 946   }
 947
 948   // Put the TRD volumes into the space frame mother volumes
 949   // if enabled via status flag
 950   xpos = 0.0;
 951   ypos = 0.5*fgkSlength + 0.5*fgkFlength;
 952   zpos = 0.0;
 953   for (Int_t isector = 0; isector < kNsector; isector++) {
 954     if (GetSMstatus(isector)) {
 955       snprintf(cTagV,kTag,"BTRD%d",isector);
 956       TVirtualMC::GetMC()->Gspos("UTF1",1,cTagV,xpos, ypos,zpos,0,"ONLY");
 957       TVirtualMC::GetMC()->Gspos("UTF2",1,cTagV,xpos,-ypos,zpos,0,"ONLY");
 958     }
 959   }
 960
 961 }
 962
 963 //_____________________________________________________________________________
 964 void AliTRDgeometry::CreateFrame(Int_t *idtmed)
 965 {
 966   //
 967   // Create the geometry of the frame of the supermodule
 968   //
 969   // Names of the TRD services volumina
 970   //
 971   //        USRL    Support rails for the chambers (Al)
 972   //        USxx    Support cross bars between the chambers (Al)
 973   //        USHx    Horizontal connection between the cross bars (Al)
 974   //        USLx    Long corner ledges (Al)
 975   //
 976
 977   Int_t   ilayer = 0;
 978
 979   Float_t xpos  = 0.0;
 980   Float_t ypos  = 0.0;
 981   Float_t zpos  = 0.0;
 982
 983   const Int_t kTag = 100;
 984   Char_t  cTagV[kTag];
 985   Char_t  cTagM[kTag];
 986
 987   const Int_t kNparTRD = 4;
 988   Float_t parTRD[kNparTRD];
 989   const Int_t kNparBOX = 3;
 990   Float_t parBOX[kNparBOX];
 991   const Int_t kNparTRP = 11;
 992   Float_t parTRP[kNparTRP];
 993
 994   // The rotation matrices
 995   const Int_t kNmatrix = 7;
 996   Int_t   matrix[kNmatrix];
 997   TVirtualMC::GetMC()->Matrix(matrix[0], 100.0,   0.0,  90.0,  90.0,  10.0,   0.0);
 998   TVirtualMC::GetMC()->Matrix(matrix[1],  80.0,   0.0,  90.0,  90.0,  10.0, 180.0);
 999   TVirtualMC::GetMC()->Matrix(matrix[2],  90.0,   0.0,   0.0,   0.0,  90.0,  90.0);
1000   TVirtualMC::GetMC()->Matrix(matrix[3],  90.0, 180.0,   0.0, 180.0,  90.0,  90.0);
1001   TVirtualMC::GetMC()->Matrix(matrix[4], 170.0,   0.0,  80.0,   0.0,  90.0,  90.0);
1002   TVirtualMC::GetMC()->Matrix(matrix[5], 170.0, 180.0,  80.0, 180.0,  90.0,  90.0);
1003   TVirtualMC::GetMC()->Matrix(matrix[6], 180.0, 180.0,  90.0, 180.0,  90.0,  90.0);
1004
1005   //
1006   // The carbon inserts in the top/bottom aluminum plates
1007   //
1008
1009   const Int_t kNparCrb = 3;
1010   Float_t parCrb[kNparCrb];
1011   parCrb[0] = 0.0;
1012   parCrb[1] = 0.0;
1013   parCrb[2] = 0.0;
1014   TVirtualMC::GetMC()->Gsvolu("USCR","BOX ",idtmed[1326-1],parCrb,0);
1015   // Bottom 1 (all sectors)
1016   parCrb[0] =  77.49/2.0;
1017   parCrb[1] = 104.60/2.0;
1018   parCrb[2] = fgkSMpltT/2.0;
1019   xpos      =   0.0;
1020   ypos      =   0.0;
1021   zpos      = fgkSMpltT/2.0 - fgkSheight/2.0;
1022   TVirtualMC::GetMC()->Gsposp("USCR", 1,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1023   TVirtualMC::GetMC()->Gsposp("USCR", 2,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1024   TVirtualMC::GetMC()->Gsposp("USCR", 3,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1025   TVirtualMC::GetMC()->Gsposp("USCR", 4,"UTS4", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1026   // Bottom 2 (all sectors)
1027   parCrb[0] =  77.49/2.0;
1028   parCrb[1] =  55.80/2.0;
1029   parCrb[2] = fgkSMpltT/2.0;
1030   xpos      =   0.0;
1031   ypos      =  85.6;
1032   zpos      = fgkSMpltT/2.0 - fgkSheight/2.0;
1033   TVirtualMC::GetMC()->Gsposp("USCR", 5,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1034   TVirtualMC::GetMC()->Gsposp("USCR", 6,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1035   TVirtualMC::GetMC()->Gsposp("USCR", 7,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1036   TVirtualMC::GetMC()->Gsposp("USCR", 8,"UTS4", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1037   TVirtualMC::GetMC()->Gsposp("USCR", 9,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1038   TVirtualMC::GetMC()->Gsposp("USCR",10,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1039   TVirtualMC::GetMC()->Gsposp("USCR",11,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1040   TVirtualMC::GetMC()->Gsposp("USCR",12,"UTS4", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1041   // Bottom 3 (all sectors)
1042   parCrb[0] =  77.49/2.0;
1043   parCrb[1] =  56.00/2.0;
1044   parCrb[2] = fgkSMpltT/2.0;
1045   xpos      =   0.0;
1046   ypos      = 148.5;
1047   zpos      = fgkSMpltT/2.0 - fgkSheight/2.0;
1048   TVirtualMC::GetMC()->Gsposp("USCR",13,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1049   TVirtualMC::GetMC()->Gsposp("USCR",14,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1050   TVirtualMC::GetMC()->Gsposp("USCR",15,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1051   TVirtualMC::GetMC()->Gsposp("USCR",16,"UTS4", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1052   TVirtualMC::GetMC()->Gsposp("USCR",17,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1053   TVirtualMC::GetMC()->Gsposp("USCR",18,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1054   TVirtualMC::GetMC()->Gsposp("USCR",19,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1055   TVirtualMC::GetMC()->Gsposp("USCR",20,"UTS4", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1056   // Bottom 4 (all sectors)
1057   parCrb[0] =  77.49/2.0;
1058   parCrb[1] = 118.00/2.0;
1059   parCrb[2] = fgkSMpltT/2.0;
1060   xpos      =   0.0;
1061   ypos      = 240.5;
1062   zpos      = fgkSMpltT/2.0 - fgkSheight/2.0;
1063   TVirtualMC::GetMC()->Gsposp("USCR",21,"UTS1", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1064   TVirtualMC::GetMC()->Gsposp("USCR",22,"UTS2", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1065   TVirtualMC::GetMC()->Gsposp("USCR",23,"UTS3", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1066   TVirtualMC::GetMC()->Gsposp("USCR",24,"UTS4", xpos, ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1067   TVirtualMC::GetMC()->Gsposp("USCR",25,"UTS1", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1068   TVirtualMC::GetMC()->Gsposp("USCR",26,"UTS2", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1069   TVirtualMC::GetMC()->Gsposp("USCR",27,"UTS3", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1070   TVirtualMC::GetMC()->Gsposp("USCR",28,"UTS4", xpos,-ypos, zpos,0,"ONLY",parCrb,kNparCrb);
1071   // Top 1 (only in front of PHOS)
1072   parCrb[0] = 111.48/2.0;
1073   parCrb[1] = 105.00/2.0;
1074   parCrb[2] = fgkSMpltT/2.0;
1075   xpos      =   0.0;
1076   ypos      =   0.0;
1077   zpos      = fgkSMpltT/2.0 - fgkSheight/2.0;
1078   TVirtualMC::GetMC()->Gsposp("USCR",29,"UTS2", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb);
1079   TVirtualMC::GetMC()->Gsposp("USCR",30,"UTS3", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb);
1080   // Top 2 (only in front of PHOS)
1081   parCrb[0] = 111.48/2.0;
1082   parCrb[1] =  56.00/2.0;
1083   parCrb[2] = fgkSMpltT/2.0;
1084   xpos      =   0.0;
1085   ypos      =  85.5;
1086   zpos      = fgkSMpltT/2.0 - fgkSheight/2.0;
1087   TVirtualMC::GetMC()->Gsposp("USCR",31,"UTS2", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb);
1088   TVirtualMC::GetMC()->Gsposp("USCR",32,"UTS3", xpos, ypos,-zpos,0,"ONLY",parCrb,kNparCrb);
1089   TVirtualMC::GetMC()->Gsposp("USCR",33,"UTS2", xpos,-ypos,-zpos,0,"ONLY",parCrb,kNparCrb);
1090   TVirtualMC::GetMC()->Gsposp("USCR",34,"UTS3", xpos,-ypos,-zpos,0,"ONLY",parCrb,kNparCrb);
1091
1092   //
1093   // The chamber support rails
1094   //
1095
1096   const Float_t kSRLhgt  = 2.00;
1097   const Float_t kSRLwidA = 2.3;
1098   const Float_t kSRLwidB = 1.947;
1099   const Float_t kSRLdst  = 1.135;
1100   const Int_t   kNparSRL = 11;
1101   Float_t parSRL[kNparSRL];
1102   // Trapezoidal shape
1103   parSRL[ 0] = fgkSlength/2.0;
1104   parSRL[ 1] = 0.0;
1105   parSRL[ 2] = 0.0;
1106   parSRL[ 3] = kSRLhgt  /2.0;
1107   parSRL[ 4] = kSRLwidB /2.0;
1108   parSRL[ 5] = kSRLwidA /2.0;
1109   parSRL[ 6] = 5.0;
1110   parSRL[ 7] = kSRLhgt  /2.0;
1111   parSRL[ 8] = kSRLwidB /2.0;
1112   parSRL[ 9] = kSRLwidA /2.0;
1113   parSRL[10] = 5.0;
1114   TVirtualMC::GetMC()->Gsvolu("USRL","TRAP",idtmed[1301-1],parSRL,kNparSRL);
1115
1116   xpos  = 0.0;
1117   ypos  = 0.0;
1118   zpos  = 0.0;
1119   for (ilayer = 1; ilayer < kNlayer; ilayer++) {
1120     xpos  = fgkCwidth[ilayer]/2.0 + kSRLwidA/2.0 + kSRLdst;
1121     ypos  = 0.0;
1122     zpos  = fgkVrocsm + fgkSMpltT - fgkCalZpos - fgkSheight/2.0
1123           + fgkCraH + fgkCdrH - fgkCalH - kSRLhgt/2.0
1124           + ilayer * (fgkCH + fgkVspace);
1125     TVirtualMC::GetMC()->Gspos("USRL",ilayer+1          ,"UTI1", xpos,ypos,zpos,matrix[2],"ONLY");
1126     TVirtualMC::GetMC()->Gspos("USRL",ilayer+1+  kNlayer,"UTI1",-xpos,ypos,zpos,matrix[3],"ONLY");
1127     TVirtualMC::GetMC()->Gspos("USRL",ilayer+1+2*kNlayer,"UTI2", xpos,ypos,zpos,matrix[2],"ONLY");
1128     TVirtualMC::GetMC()->Gspos("USRL",ilayer+1+3*kNlayer,"UTI2",-xpos,ypos,zpos,matrix[3],"ONLY");
1129     TVirtualMC::GetMC()->Gspos("USRL",ilayer+1+4*kNlayer,"UTI3", xpos,ypos,zpos,matrix[2],"ONLY");
1130     TVirtualMC::GetMC()->Gspos("USRL",ilayer+1+5*kNlayer,"UTI3",-xpos,ypos,zpos,matrix[3],"ONLY");
1131     TVirtualMC::GetMC()->Gspos("USRL",ilayer+1+6*kNlayer,"UTI4", xpos,ypos,zpos,matrix[2],"ONLY");
1132     TVirtualMC::GetMC()->Gspos("USRL",ilayer+1+7*kNlayer,"UTI4",-xpos,ypos,zpos,matrix[3],"ONLY");
1133   }
1134
1135   //
1136   // The cross bars between the chambers
1137   //
1138
1139   const Float_t kSCBwid  = 1.0;
1140   const Float_t kSCBthk  = 2.0;
1141   const Float_t kSCHhgt  = 0.3;
1142
1143   const Int_t   kNparSCB = 3;
1144   Float_t parSCB[kNparSCB];
1145   parSCB[1] = kSCBwid/2.0;
1146   parSCB[2] = fgkCH  /2.0 + fgkVspace/2.0 - kSCHhgt;
1147
1148   const Int_t   kNparSCI = 3;
1149   Float_t parSCI[kNparSCI];
1150   parSCI[1] = -1;
1151
1152   xpos  = 0.0;
1153   ypos  = 0.0;
1154   zpos  = 0.0;
1155   for (ilayer = 0; ilayer < kNlayer; ilayer++) {
1156
1157     // The aluminum of the cross bars
1158     parSCB[0] = fgkCwidth[ilayer]/2.0 + kSRLdst/2.0;
1159     snprintf(cTagV,kTag,"USF%01d",ilayer);
1160     TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parSCB,kNparSCB);
1161
1162     // The empty regions in the cross bars
1163     Float_t thkSCB = kSCBthk;
1164     if (ilayer < 2) {
1165       thkSCB *= 1.5;
1166     }
1167     parSCI[2] = parSCB[2] - thkSCB;
1168     parSCI[0] = parSCB[0]/4.0 - kSCBthk;
1169     snprintf(cTagV,kTag,"USI%01d",ilayer);
1170     TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1302-1],parSCI,kNparSCI);
1171
1172     snprintf(cTagV,kTag,"USI%01d",ilayer);
1173     snprintf(cTagM,kTag,"USF%01d",ilayer);
1174     ypos  = 0.0;
1175     zpos  = 0.0;
1176     xpos  =   parSCI[0] + thkSCB/2.0;
1177     TVirtualMC::GetMC()->Gspos(cTagV,1,cTagM,xpos,ypos,zpos,0,"ONLY");
1178     xpos  = - parSCI[0] - thkSCB/2.0;
1179     TVirtualMC::GetMC()->Gspos(cTagV,2,cTagM,xpos,ypos,zpos,0,"ONLY");
1180     xpos  =   3.0 * parSCI[0] + 1.5 * thkSCB;
1181     TVirtualMC::GetMC()->Gspos(cTagV,3,cTagM,xpos,ypos,zpos,0,"ONLY");
1182     xpos  = - 3.0 * parSCI[0] - 1.5 * thkSCB;
1183     TVirtualMC::GetMC()->Gspos(cTagV,4,cTagM,xpos,ypos,zpos,0,"ONLY");
1184
1185     snprintf(cTagV,kTag,"USF%01d",ilayer);
1186     xpos  = 0.0;
1187     zpos  = fgkVrocsm + fgkSMpltT + parSCB[2] - fgkSheight/2.0
1188           + ilayer * (fgkCH + fgkVspace);
1189
1190     ypos  =   fgkClength[ilayer][2]/2.0 + fgkClength[ilayer][1];
1191     TVirtualMC::GetMC()->Gspos(cTagV, 1,"UTI1", xpos,ypos,zpos,0,"ONLY");
1192     TVirtualMC::GetMC()->Gspos(cTagV, 3,"UTI2", xpos,ypos,zpos,0,"ONLY");
1193     TVirtualMC::GetMC()->Gspos(cTagV, 5,"UTI3", xpos,ypos,zpos,0,"ONLY");
1194     TVirtualMC::GetMC()->Gspos(cTagV, 7,"UTI4", xpos,ypos,zpos,0,"ONLY");
1195
1196     ypos  = - fgkClength[ilayer][2]/2.0 - fgkClength[ilayer][1];
1197     TVirtualMC::GetMC()->Gspos(cTagV, 2,"UTI1", xpos,ypos,zpos,0,"ONLY");
1198     TVirtualMC::GetMC()->Gspos(cTagV, 4,"UTI2", xpos,ypos,zpos,0,"ONLY");
1199     TVirtualMC::GetMC()->Gspos(cTagV, 6,"UTI3", xpos,ypos,zpos,0,"ONLY");
1200     TVirtualMC::GetMC()->Gspos(cTagV, 8,"UTI4", xpos,ypos,zpos,0,"ONLY");
1201
1202   }
1203
1204   //
1205   // The horizontal connections between the cross bars
1206   //
1207
1208   const Int_t   kNparSCH = 3;
1209   Float_t parSCH[kNparSCH];
1210
1211   for (ilayer = 1; ilayer < kNlayer-1; ilayer++) {
1212
1213     parSCH[0] = fgkCwidth[ilayer]/2.0;
1214     parSCH[1] = (fgkClength[ilayer+1][2]/2.0 + fgkClength[ilayer+1][1]
1215                - fgkClength[ilayer  ][2]/2.0 - fgkClength[ilayer  ][1])/2.0;
1216     parSCH[2] = kSCHhgt/2.0;
1217
1218     snprintf(cTagV,kTag,"USH%01d",ilayer);
1219     TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX ",idtmed[1301-1],parSCH,kNparSCH);
1220     xpos  = 0.0;
1221     ypos  = fgkClength[ilayer][2]/2.0 + fgkClength[ilayer][1] + parSCH[1];
1222     zpos  = fgkVrocsm + fgkSMpltT - kSCHhgt/2.0 - fgkSheight/2.0
1223           + (ilayer+1) * (fgkCH + fgkVspace);
1224     TVirtualMC::GetMC()->Gspos(cTagV,1,"UTI1", xpos,ypos,zpos,0,"ONLY");
1225     TVirtualMC::GetMC()->Gspos(cTagV,3,"UTI2", xpos,ypos,zpos,0,"ONLY");
1226     TVirtualMC::GetMC()->Gspos(cTagV,5,"UTI3", xpos,ypos,zpos,0,"ONLY");
1227     TVirtualMC::GetMC()->Gspos(cTagV,7,"UTI4", xpos,ypos,zpos,0,"ONLY");
1228     ypos  = -ypos;
1229     TVirtualMC::GetMC()->Gspos(cTagV,2,"UTI1", xpos,ypos,zpos,0,"ONLY");
1230     TVirtualMC::GetMC()->Gspos(cTagV,4,"UTI2", xpos,ypos,zpos,0,"ONLY");
1231     TVirtualMC::GetMC()->Gspos(cTagV,6,"UTI3", xpos,ypos,zpos,0,"ONLY");
1232     TVirtualMC::GetMC()->Gspos(cTagV,8,"UTI4", xpos,ypos,zpos,0,"ONLY");
1233
1234   }
1235
1236   //
1237   // The aymmetric flat frame in the middle
1238   //
1239
1240   // The envelope volume (aluminum)
1241   parTRD[0]  =  87.60/2.0;
1242   parTRD[1]  = 114.00/2.0;
1243   parTRD[2]  =   1.20/2.0;
1244   parTRD[3]  =  71.30/2.0;
1245   TVirtualMC::GetMC()->Gsvolu("USDB","TRD1",idtmed[1301-1],parTRD,kNparTRD);
1246   // Empty spaces (air)
1247   parTRP[ 0] =   1.20/2.0;
1248   parTRP[ 1] =   0.0;
1249   parTRP[ 2] =   0.0;
1250   parTRP[ 3] =  27.00/2.0;
1251   parTRP[ 4] =  50.60/2.0;
1252   parTRP[ 5] =   5.00/2.0;
1253   parTRP[ 6] =   3.5;
1254   parTRP[ 7] =  27.00/2.0;
1255   parTRP[ 8] =  50.60/2.0;
1256   parTRP[ 9] =   5.00/2.0;
1257   parTRP[10] =   3.5;
1258   TVirtualMC::GetMC()->Gsvolu("USD1","TRAP",idtmed[1302-1],parTRP,kNparTRP);
1259   xpos       =  18.0;
1260   ypos       =   0.0;
1261   zpos       =   27.00/2.0 - 71.3/2.0;
1262   TVirtualMC::GetMC()->Gspos("USD1",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY");
1263   // Empty spaces (air)
1264   parTRP[ 0] =   1.20/2.0;
1265   parTRP[ 1] =   0.0;
1266   parTRP[ 2] =   0.0;
1267   parTRP[ 3] =  33.00/2.0;
1268   parTRP[ 4] =   5.00/2.0;
1269   parTRP[ 5] =  62.10/2.0;
1270   parTRP[ 6] =   3.5;
1271   parTRP[ 7] =  33.00/2.0;
1272   parTRP[ 8] =   5.00/2.0;
1273   parTRP[ 9] =  62.10/2.0;
1274   parTRP[10] =   3.5;
1275   TVirtualMC::GetMC()->Gsvolu("USD2","TRAP",idtmed[1302-1],parTRP,kNparTRP);
1276   xpos       =  21.0;
1277   ypos       =   0.0;
1278   zpos       =  71.3/2.0 - 33.0/2.0;
1279   TVirtualMC::GetMC()->Gspos("USD2",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY");
1280   // Empty spaces (air)
1281   parBOX[ 0] =  22.50/2.0;
1282   parBOX[ 1] =   1.20/2.0;
1283   parBOX[ 2] =  70.50/2.0;
1284   TVirtualMC::GetMC()->Gsvolu("USD3","BOX ",idtmed[1302-1],parBOX,kNparBOX);
1285   xpos       = -25.75;
1286   ypos       =   0.0;
1287   zpos       =   0.4;
1288   TVirtualMC::GetMC()->Gspos("USD3",1,"USDB", xpos, ypos, zpos,        0,"ONLY");
1289   // Empty spaces (air)
1290   parTRP[ 0] =   1.20/2.0;
1291   parTRP[ 1] =   0.0;
1292   parTRP[ 2] =   0.0;
1293   parTRP[ 3] =  25.50/2.0;
1294   parTRP[ 4] =   5.00/2.0;
1295   parTRP[ 5] =  65.00/2.0;
1296   parTRP[ 6] =  -1.0;
1297   parTRP[ 7] =  25.50/2.0;
1298   parTRP[ 8] =   5.00/2.0;
1299   parTRP[ 9] =  65.00/2.0;
1300   parTRP[10] =  -1.0;
1301   TVirtualMC::GetMC()->Gsvolu("USD4","TRAP",idtmed[1302-1],parTRP,kNparTRP);
1302   xpos       =   2.0;
1303   ypos       =   0.0;
1304   zpos       =  -1.6;
1305   TVirtualMC::GetMC()->Gspos("USD4",1,"USDB", xpos, ypos, zpos,matrix[6],"ONLY");
1306   // Empty spaces (air)
1307   parTRP[ 0] =   1.20/2.0;
1308   parTRP[ 1] =   0.0;
1309   parTRP[ 2] =   0.0;
1310   parTRP[ 3] =  23.50/2.0;
1311   parTRP[ 4] =  63.50/2.0;
1312   parTRP[ 5] =   5.00/2.0;
1313   parTRP[ 6] =  16.0;
1314   parTRP[ 7] =  23.50/2.0;
1315   parTRP[ 8] =  63.50/2.0;
1316   parTRP[ 9] =   5.00/2.0;
1317   parTRP[10] =  16.0;
1318   TVirtualMC::GetMC()->Gsvolu("USD5","TRAP",idtmed[1302-1],parTRP,kNparTRP);
1319   xpos       =  36.5;
1320   ypos       =   0.0;
1321   zpos       =  -1.5;
1322   TVirtualMC::GetMC()->Gspos("USD5",1,"USDB", xpos, ypos, zpos,matrix[5],"ONLY");
1323   // Empty spaces (air)
1324   parTRP[ 0] =   1.20/2.0;
1325   parTRP[ 1] =   0.0;
1326   parTRP[ 2] =   0.0;
1327   parTRP[ 3] =  70.50/2.0;
1328   parTRP[ 4] =   4.50/2.0;
1329   parTRP[ 5] =  16.50/2.0;
1330   parTRP[ 6] =  -5.0;
1331   parTRP[ 7] =  70.50/2.0;
1332   parTRP[ 8] =   4.50/2.0;
1333   parTRP[ 9] =  16.50/2.0;
1334   parTRP[10] =  -5.0;
1335   TVirtualMC::GetMC()->Gsvolu("USD6","TRAP",idtmed[1302-1],parTRP,kNparTRP);
1336   xpos       = -43.7;
1337   ypos       =   0.0;
1338   zpos       =   0.4;
1339   TVirtualMC::GetMC()->Gspos("USD6",1,"USDB", xpos, ypos, zpos,matrix[2],"ONLY");
1340   xpos       =   0.0;
1341   ypos       =   fgkClength[5][2]/2.0;
1342   zpos       =   0.04;
1343   TVirtualMC::GetMC()->Gspos("USDB",1,"UTI1", xpos, ypos, zpos,        0,"ONLY");
1344   TVirtualMC::GetMC()->Gspos("USDB",2,"UTI1", xpos,-ypos, zpos,        0,"ONLY");
1345   TVirtualMC::GetMC()->Gspos("USDB",3,"UTI2", xpos, ypos, zpos,        0,"ONLY");
1346   TVirtualMC::GetMC()->Gspos("USDB",4,"UTI2", xpos,-ypos, zpos,        0,"ONLY");
1347   TVirtualMC::GetMC()->Gspos("USDB",5,"UTI3", xpos, ypos, zpos,        0,"ONLY");
1348   TVirtualMC::GetMC()->Gspos("USDB",6,"UTI3", xpos,-ypos, zpos,        0,"ONLY");
1349   TVirtualMC::GetMC()->Gspos("USDB",7,"UTI4", xpos, ypos, zpos,        0,"ONLY");
1350   TVirtualMC::GetMC()->Gspos("USDB",8,"UTI4", xpos,-ypos, zpos,        0,"ONLY");
1351   // Upper bar (aluminum)
1352   parBOX[0] = 95.00/2.0;
1353   parBOX[1] =  1.20/2.0;
1354   parBOX[2] =  3.00/2.0;
1355   TVirtualMC::GetMC()->Gsvolu("USD7","BOX ",idtmed[1301-1],parBOX,kNparBOX);
1356   xpos       =   0.0;
1357   ypos       =   fgkClength[5][2]/2.0;
1358   zpos       =   fgkSheight/2.0 - fgkSMpltT  - 3.00/2.0;
1359   TVirtualMC::GetMC()->Gspos("USD7",1,"UTI1", xpos, ypos, zpos,        0,"ONLY");
1360   TVirtualMC::GetMC()->Gspos("USD7",2,"UTI1", xpos,-ypos, zpos,        0,"ONLY");
1361   TVirtualMC::GetMC()->Gspos("USD7",3,"UTI2", xpos, ypos, zpos,        0,"ONLY");
1362   TVirtualMC::GetMC()->Gspos("USD7",4,"UTI2", xpos,-ypos, zpos,        0,"ONLY");
1363   TVirtualMC::GetMC()->Gspos("USD7",5,"UTI3", xpos, ypos, zpos,        0,"ONLY");
1364   TVirtualMC::GetMC()->Gspos("USD7",6,"UTI3", xpos,-ypos, zpos,        0,"ONLY");
1365   TVirtualMC::GetMC()->Gspos("USD7",7,"UTI4", xpos, ypos, zpos,        0,"ONLY");
1366   TVirtualMC::GetMC()->Gspos("USD7",8,"UTI4", xpos,-ypos, zpos,        0,"ONLY");
1367   // Lower bar (aluminum)
1368   parBOX[0] = 90.22/2.0;
1369   parBOX[1] =  1.20/2.0;
1370   parBOX[2] =  1.74/2.0;
1371   TVirtualMC::GetMC()->Gsvolu("USD8","BOX ",idtmed[1301-1],parBOX,kNparBOX);
1372   xpos       =   0.0;
1373   ypos       =   fgkClength[5][2]/2.0 - 0.1;
1374   zpos       =  -fgkSheight/2.0 + fgkSMpltT + 2.27;
1375   TVirtualMC::GetMC()->Gspos("USD8",1,"UTI1", xpos, ypos, zpos,        0,"ONLY");
1376   TVirtualMC::GetMC()->Gspos("USD8",2,"UTI1", xpos,-ypos, zpos,        0,"ONLY");
1377   TVirtualMC::GetMC()->Gspos("USD8",3,"UTI2", xpos, ypos, zpos,        0,"ONLY");
1378   TVirtualMC::GetMC()->Gspos("USD8",4,"UTI2", xpos,-ypos, zpos,        0,"ONLY");
1379   TVirtualMC::GetMC()->Gspos("USD8",5,"UTI3", xpos, ypos, zpos,        0,"ONLY");
1380   TVirtualMC::GetMC()->Gspos("USD8",6,"UTI3", xpos,-ypos, zpos,        0,"ONLY");
1381   TVirtualMC::GetMC()->Gspos("USD8",7,"UTI4", xpos, ypos, zpos,        0,"ONLY");
1382   TVirtualMC::GetMC()->Gspos("USD8",8,"UTI4", xpos,-ypos, zpos,        0,"ONLY");
1383   // Lower bar (aluminum)
1384   parBOX[0] = 82.60/2.0;
1385   parBOX[1] =  1.20/2.0;
1386   parBOX[2] =  1.40/2.0;
1387   TVirtualMC::GetMC()->Gsvolu("USD9","BOX ",idtmed[1301-1],parBOX,kNparBOX);
1388   xpos       =   0.0;
1389   ypos       =   fgkClength[5][2]/2.0;
1390   zpos       =  -fgkSheight/2.0 + fgkSMpltT + 1.40/2.0;
1391   TVirtualMC::GetMC()->Gspos("USD9",1,"UTI1", xpos, ypos, zpos,        0,"ONLY");
1392   TVirtualMC::GetMC()->Gspos("USD9",2,"UTI1", xpos,-ypos, zpos,        0,"ONLY");
1393   TVirtualMC::GetMC()->Gspos("USD9",3,"UTI2", xpos, ypos, zpos,        0,"ONLY");
1394   TVirtualMC::GetMC()->Gspos("USD9",4,"UTI2", xpos,-ypos, zpos,        0,"ONLY");
1395   TVirtualMC::GetMC()->Gspos("USD9",5,"UTI3", xpos, ypos, zpos,        0,"ONLY");
1396   TVirtualMC::GetMC()->Gspos("USD9",6,"UTI3", xpos,-ypos, zpos,        0,"ONLY");
1397   TVirtualMC::GetMC()->Gspos("USD9",7,"UTI4", xpos, ypos, zpos,        0,"ONLY");
1398   TVirtualMC::GetMC()->Gspos("USD9",8,"UTI4", xpos,-ypos, zpos,        0,"ONLY");
1399   // Front sheet (aluminum)
1400   parTRP[ 0] =   0.10/2.0;
1401   parTRP[ 1] =   0.0;
1402   parTRP[ 2] =   0.0;
1403   parTRP[ 3] =  74.50/2.0;
1404   parTRP[ 4] =  31.70/2.0;
1405   parTRP[ 5] =  44.00/2.0;
1406   parTRP[ 6] =  -5.0;
1407   parTRP[ 7] =  74.50/2.0;
1408   parTRP[ 8] =  31.70/2.0;
1409   parTRP[ 9] =  44.00/2.0;
1410   parTRP[10] =  -5.0;
1411   TVirtualMC::GetMC()->Gsvolu("USDF","TRAP",idtmed[1302-1],parTRP,kNparTRP);
1412   xpos       = -32.0;
1413   ypos       =   fgkClength[5][2]/2.0 + 1.20/2.0 + 0.10/2.0;
1414   zpos       =   0.0;
1415   TVirtualMC::GetMC()->Gspos("USDF",1,"UTI1", xpos, ypos, zpos,matrix[2],"ONLY");
1416   TVirtualMC::GetMC()->Gspos("USDF",2,"UTI1", xpos,-ypos, zpos,matrix[2],"ONLY");
1417   TVirtualMC::GetMC()->Gspos("USDF",3,"UTI2", xpos, ypos, zpos,matrix[2],"ONLY");
1418   TVirtualMC::GetMC()->Gspos("USDF",4,"UTI2", xpos,-ypos, zpos,matrix[2],"ONLY");
1419   TVirtualMC::GetMC()->Gspos("USDF",5,"UTI3", xpos, ypos, zpos,matrix[2],"ONLY");
1420   TVirtualMC::GetMC()->Gspos("USDF",6,"UTI3", xpos,-ypos, zpos,matrix[2],"ONLY");
1421   TVirtualMC::GetMC()->Gspos("USDF",7,"UTI4", xpos, ypos, zpos,matrix[2],"ONLY");
1422   TVirtualMC::GetMC()->Gspos("USDF",8,"UTI4", xpos,-ypos, zpos,matrix[2],"ONLY");
1423
1424   //
1425   // The flat frame in front of the chambers
1426   //
1427
1428   // The envelope volume (aluminum)
1429   parTRD[0]  =  90.00/2.0 - 0.1;
1430   parTRD[1]  = 114.00/2.0 - 0.1;
1431   parTRD[2]  =   1.50/2.0;
1432   parTRD[3]  =  70.30/2.0;
1433   TVirtualMC::GetMC()->Gsvolu("USCB","TRD1",idtmed[1301-1],parTRD,kNparTRD);
1434   // Empty spaces (air)
1435   parTRD[0]  =  87.00/2.0;
1436   parTRD[1]  =  10.00/2.0;
1437   parTRD[2]  =   1.50/2.0;
1438   parTRD[3]  =  26.35/2.0;
1439   TVirtualMC::GetMC()->Gsvolu("USC1","TRD1",idtmed[1302-1],parTRD,kNparTRD);
1440   xpos       =  0.0;
1441   ypos       =  0.0;
1442   zpos       = 26.35/2.0 - 70.3/2.0;
1443   TVirtualMC::GetMC()->Gspos("USC1",1,"USCB",xpos,ypos,zpos,0,"ONLY");
1444   // Empty spaces (air)
1445   parTRD[0]  =  10.00/2.0;
1446   parTRD[1]  = 111.00/2.0;
1447   parTRD[2]  =   1.50/2.0;
1448   parTRD[3]  =  35.05/2.0;
1449   TVirtualMC::GetMC()->Gsvolu("USC2","TRD1",idtmed[1302-1],parTRD,kNparTRD);
1450   xpos       =  0.0;
1451   ypos       =  0.0;
1452   zpos       = 70.3/2.0 - 35.05/2.0;
1453   TVirtualMC::GetMC()->Gspos("USC2",1,"USCB",xpos,ypos,zpos,0,"ONLY");
1454   // Empty spaces (air)
1455   parTRP[ 0] =   1.50/2.0;
1456   parTRP[ 1] =   0.0;
1457   parTRP[ 2] =   0.0;
1458   parTRP[ 3] =  37.60/2.0;
1459   parTRP[ 4] =  63.90/2.0;
1460   parTRP[ 5] =   8.86/2.0;
1461   parTRP[ 6] =  16.0;
1462   parTRP[ 7] =  37.60/2.0;
1463   parTRP[ 8] =  63.90/2.0;
1464   parTRP[ 9] =   8.86/2.0;
1465   parTRP[10] =  16.0;
1466   TVirtualMC::GetMC()->Gsvolu("USC3","TRAP",idtmed[1302-1],parTRP,kNparTRP);
1467   xpos       = -30.5;
1468   ypos       =   0.0;
1469   zpos       =  -2.0;
1470   TVirtualMC::GetMC()->Gspos("USC3",1,"USCB", xpos, ypos, zpos,matrix[4],"ONLY");
1471   TVirtualMC::GetMC()->Gspos("USC3",2,"USCB",-xpos, ypos, zpos,matrix[5],"ONLY");
1472   xpos       =   0.0;
1473   ypos       =   fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0];
1474   zpos       =   0.0;
1475   TVirtualMC::GetMC()->Gspos("USCB",1,"UTI1", xpos, ypos, zpos,        0,"ONLY");
1476   TVirtualMC::GetMC()->Gspos("USCB",2,"UTI1", xpos,-ypos, zpos,        0,"ONLY");
1477   TVirtualMC::GetMC()->Gspos("USCB",3,"UTI2", xpos, ypos, zpos,        0,"ONLY");
1478   TVirtualMC::GetMC()->Gspos("USCB",4,"UTI2", xpos,-ypos, zpos,        0,"ONLY");
1479   TVirtualMC::GetMC()->Gspos("USCB",5,"UTI3", xpos, ypos, zpos,        0,"ONLY");
1480   TVirtualMC::GetMC()->Gspos("USCB",6,"UTI3", xpos,-ypos, zpos,        0,"ONLY");
1481   TVirtualMC::GetMC()->Gspos("USCB",7,"UTI4", xpos, ypos, zpos,        0,"ONLY");
1482   TVirtualMC::GetMC()->Gspos("USCB",8,"UTI4", xpos,-ypos, zpos,        0,"ONLY");
1483   // Upper bar (aluminum)
1484   parBOX[0] = 95.00/2.0;
1485   parBOX[1] =  1.50/2.0;
1486   parBOX[2] =  3.00/2.0;
1487   TVirtualMC::GetMC()->Gsvolu("USC4","BOX ",idtmed[1301-1],parBOX,kNparBOX);
1488   xpos       =   0.0;
1489   ypos       =   fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0];
1490   zpos       =   fgkSheight/2.0 - fgkSMpltT - 3.00/2.0;
1491   TVirtualMC::GetMC()->Gspos("USC4",1,"UTI1", xpos, ypos, zpos,        0,"ONLY");
1492   TVirtualMC::GetMC()->Gspos("USC4",2,"UTI1", xpos,-ypos, zpos,        0,"ONLY");
1493   TVirtualMC::GetMC()->Gspos("USC4",3,"UTI2", xpos, ypos, zpos,        0,"ONLY");
1494   TVirtualMC::GetMC()->Gspos("USC4",4,"UTI2", xpos,-ypos, zpos,        0,"ONLY");
1495   TVirtualMC::GetMC()->Gspos("USC4",5,"UTI3", xpos, ypos, zpos,        0,"ONLY");
1496   TVirtualMC::GetMC()->Gspos("USC4",6,"UTI3", xpos,-ypos, zpos,        0,"ONLY");
1497   TVirtualMC::GetMC()->Gspos("USC4",7,"UTI4", xpos, ypos, zpos,        0,"ONLY");
1498   TVirtualMC::GetMC()->Gspos("USC4",8,"UTI4", xpos,-ypos, zpos,        0,"ONLY");
1499   // Lower bar (aluminum)
1500   parBOX[0] = 90.22/2.0;
1501   parBOX[1] =  1.50/2.0;
1502   parBOX[2] =  2.00/2.0;
1503   TVirtualMC::GetMC()->Gsvolu("USC5","BOX ",idtmed[1301-1],parBOX,kNparBOX);
1504   xpos       =   0.0;
1505   ypos       =   fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0];
1506   zpos       =  -fgkSheight/2.0 + fgkSMpltT + 2.60;
1507   TVirtualMC::GetMC()->Gspos("USC5",1,"UTI1", xpos, ypos, zpos,        0,"ONLY");
1508   TVirtualMC::GetMC()->Gspos("USC5",2,"UTI1", xpos,-ypos, zpos,        0,"ONLY");
1509   TVirtualMC::GetMC()->Gspos("USC5",3,"UTI2", xpos, ypos, zpos,        0,"ONLY");
1510   TVirtualMC::GetMC()->Gspos("USC5",4,"UTI2", xpos,-ypos, zpos,        0,"ONLY");
1511   TVirtualMC::GetMC()->Gspos("USC5",5,"UTI3", xpos, ypos, zpos,        0,"ONLY");
1512   TVirtualMC::GetMC()->Gspos("USC5",6,"UTI3", xpos,-ypos, zpos,        0,"ONLY");
1513   TVirtualMC::GetMC()->Gspos("USC5",7,"UTI4", xpos, ypos, zpos,        0,"ONLY");
1514   TVirtualMC::GetMC()->Gspos("USC5",8,"UTI4", xpos,-ypos, zpos,        0,"ONLY");
1515   // Lower bar (aluminum)
1516   parBOX[0] = 82.60/2.0;
1517   parBOX[1] =  1.50/2.0;
1518   parBOX[2] =  1.60/2.0;
1519   TVirtualMC::GetMC()->Gsvolu("USC6","BOX ",idtmed[1301-1],parBOX,kNparBOX);
1520   xpos       =   0.0;
1521   ypos       =   fgkClength[5][2]/2.0 + fgkClength[5][1] + fgkClength[5][0];
1522   zpos       =  -fgkSheight/2.0 + fgkSMpltT + 1.60/2.0;
1523   TVirtualMC::GetMC()->Gspos("USC6",1,"UTI1", xpos, ypos, zpos,        0,"ONLY");
1524   TVirtualMC::GetMC()->Gspos("USC6",2,"UTI1", xpos,-ypos, zpos,        0,"ONLY");
1525   TVirtualMC::GetMC()->Gspos("USC6",3,"UTI2", xpos, ypos, zpos,        0,"ONLY");
1526   TVirtualMC::GetMC()->Gspos("USC6",4,"UTI2", xpos,-ypos, zpos,        0,"ONLY");
1527   TVirtualMC::GetMC()->Gspos("USC6",5,"UTI3", xpos, ypos, zpos,        0,"ONLY");
1528   TVirtualMC::GetMC()->Gspos("USC6",6,"UTI3", xpos,-ypos, zpos,        0,"ONLY");
1529   TVirtualMC::GetMC()->Gspos("USC6",7,"UTI4", xpos, ypos, zpos,        0,"ONLY");
1530   TVirtualMC::GetMC()->Gspos("USC6",8,"UTI4", xpos,-ypos, zpos,        0,"ONLY");
1531
1532   //
1533   // The long corner ledges
1534   //
1535
1536   const Int_t   kNparSCL  =  3;
1537   Float_t parSCL[kNparSCL];
1538   const Int_t   kNparSCLb = 11;
1539   Float_t parSCLb[kNparSCLb];
1540
1541   // Upper ledges
1542   // Thickness of the corner ledges
1543   const Float_t kSCLthkUa  =  0.6;
1544   const Float_t kSCLthkUb  =  0.6;
1545   // Width of the corner ledges
1546   const Float_t kSCLwidUa  =  3.2;
1547   const Float_t kSCLwidUb  =  4.8;
1548   // Position of the corner ledges
1549   const Float_t kSCLposxUa = 0.7;
1550   const Float_t kSCLposxUb = 3.3;
1551   const Float_t kSCLposzUa = 1.65;
1552   const Float_t kSCLposzUb = 0.3;
1553   // Vertical
1554   parSCL[0]  = kSCLthkUa /2.0;
1555   parSCL[1]  = fgkSlength/2.0;
1556   parSCL[2]  = kSCLwidUa /2.0;
1557   TVirtualMC::GetMC()->Gsvolu("USL1","BOX ",idtmed[1301-1],parSCL,kNparSCL);
1558   xpos  =   fgkSwidth2/2.0 - fgkSMpltT - kSCLposxUa;
1559   ypos  =   0.0;
1560   zpos  =   fgkSheight/2.0 - fgkSMpltT - kSCLposzUa;
1561   TVirtualMC::GetMC()->Gspos("USL1",1,"UTI1", xpos,ypos,zpos,matrix[0],"ONLY");
1562   TVirtualMC::GetMC()->Gspos("USL1",3,"UTI4", xpos,ypos,zpos,matrix[0],"ONLY");
1563   xpos  = -xpos;
1564   TVirtualMC::GetMC()->Gspos("USL1",2,"UTI1", xpos,ypos,zpos,matrix[1],"ONLY");
1565   TVirtualMC::GetMC()->Gspos("USL1",4,"UTI4", xpos,ypos,zpos,matrix[1],"ONLY");
1566   // Horizontal
1567   parSCL[0]  = kSCLwidUb /2.0;
1568   parSCL[1]  = fgkSlength/2.0;
1569   parSCL[2]  = kSCLthkUb /2.0;
1570   TVirtualMC::GetMC()->Gsvolu("USL2","BOX ",idtmed[1301-1],parSCL,kNparSCL);
1571   xpos  =   fgkSwidth2/2.0 - fgkSMpltT - kSCLposxUb;
1572   ypos  =   0.0;
1573   zpos  =   fgkSheight/2.0 - fgkSMpltT - kSCLposzUb;
1574   TVirtualMC::GetMC()->Gspos("USL2",1,"UTI1", xpos,ypos,zpos,        0,"ONLY");
1575   TVirtualMC::GetMC()->Gspos("USL2",3,"UTI2", xpos,ypos,zpos,        0,"ONLY");
1576   TVirtualMC::GetMC()->Gspos("USL2",5,"UTI3", xpos,ypos,zpos,        0,"ONLY");
1577   TVirtualMC::GetMC()->Gspos("USL2",7,"UTI4", xpos,ypos,zpos,        0,"ONLY");
1578   xpos  = -xpos;
1579   TVirtualMC::GetMC()->Gspos("USL2",2,"UTI1", xpos,ypos,zpos,        0,"ONLY");
1580   TVirtualMC::GetMC()->Gspos("USL2",4,"UTI2", xpos,ypos,zpos,        0,"ONLY");
1581   TVirtualMC::GetMC()->Gspos("USL2",6,"UTI3", xpos,ypos,zpos,        0,"ONLY");
1582   TVirtualMC::GetMC()->Gspos("USL2",8,"UTI4", xpos,ypos,zpos,        0,"ONLY");
1583
1584   // Lower ledges
1585   // Thickness of the corner ledges
1586   const Float_t kSCLthkLa  =  2.464;
1587   const Float_t kSCLthkLb  =  1.0;
1588   // Width of the corner ledges
1589   const Float_t kSCLwidLa  =  8.3;
1590   const Float_t kSCLwidLb  =  4.0;
1591   // Position of the corner ledges
1592   const Float_t kSCLposxLa = (3.0 * kSCLthkLb - kSCLthkLa) / 4.0 + 0.05;
1593   const Float_t kSCLposxLb = kSCLthkLb + kSCLwidLb/2.0 + 0.05;
1594   const Float_t kSCLposzLa = kSCLwidLa/2.0;
1595   const Float_t kSCLposzLb = kSCLthkLb/2.0;
1596   // Vertical
1597   // Trapezoidal shape
1598   parSCLb[ 0] = fgkSlength/2.0;
1599   parSCLb[ 1] = 0.0;
1600   parSCLb[ 2] = 0.0;
1601   parSCLb[ 3] = kSCLwidLa /2.0;
1602   parSCLb[ 4] = kSCLthkLb /2.0;
1603   parSCLb[ 5] = kSCLthkLa /2.0;
1604   parSCLb[ 6] = 5.0;
1605   parSCLb[ 7] = kSCLwidLa /2.0;
1606   parSCLb[ 8] = kSCLthkLb /2.0;
1607   parSCLb[ 9] = kSCLthkLa /2.0;
1608   parSCLb[10] = 5.0;
1609   TVirtualMC::GetMC()->Gsvolu("USL3","TRAP",idtmed[1301-1],parSCLb,kNparSCLb);
1610   xpos  =   fgkSwidth1/2.0 - fgkSMpltT - kSCLposxLa;
1611   ypos  =   0.0;
1612   zpos  = - fgkSheight/2.0 + fgkSMpltT + kSCLposzLa;
1613   TVirtualMC::GetMC()->Gspos("USL3",1,"UTI1", xpos,ypos,zpos,matrix[2],"ONLY");
1614   TVirtualMC::GetMC()->Gspos("USL3",3,"UTI2", xpos,ypos,zpos,matrix[2],"ONLY");
1615   TVirtualMC::GetMC()->Gspos("USL3",5,"UTI3", xpos,ypos,zpos,matrix[2],"ONLY");
1616   TVirtualMC::GetMC()->Gspos("USL3",7,"UTI4", xpos,ypos,zpos,matrix[2],"ONLY");
1617   xpos  = -xpos;
1618   TVirtualMC::GetMC()->Gspos("USL3",2,"UTI1", xpos,ypos,zpos,matrix[3],"ONLY");
1619   TVirtualMC::GetMC()->Gspos("USL3",4,"UTI2", xpos,ypos,zpos,matrix[3],"ONLY");
1620   TVirtualMC::GetMC()->Gspos("USL3",6,"UTI3", xpos,ypos,zpos,matrix[3],"ONLY");
1621   TVirtualMC::GetMC()->Gspos("USL3",8,"UTI4", xpos,ypos,zpos,matrix[3],"ONLY");
1622   // Horizontal part
1623   parSCL[0]  = kSCLwidLb /2.0;
1624   parSCL[1]  = fgkSlength/2.0;
1625   parSCL[2]  = kSCLthkLb /2.0;
1626   TVirtualMC::GetMC()->Gsvolu("USL4","BOX ",idtmed[1301-1],parSCL,kNparSCL);
1627   xpos  =   fgkSwidth1/2.0 - fgkSMpltT - kSCLposxLb;
1628   ypos  =   0.0;
1629   zpos  = - fgkSheight/2.0 + fgkSMpltT + kSCLposzLb;
1630   TVirtualMC::GetMC()->Gspos("USL4",1,"UTI1", xpos,ypos,zpos,        0,"ONLY");
1631   TVirtualMC::GetMC()->Gspos("USL4",3,"UTI2", xpos,ypos,zpos,        0,"ONLY");
1632   TVirtualMC::GetMC()->Gspos("USL4",5,"UTI3", xpos,ypos,zpos,        0,"ONLY");
1633   TVirtualMC::GetMC()->Gspos("USL4",7,"UTI4", xpos,ypos,zpos,        0,"ONLY");
1634   xpos  = -xpos;
1635   TVirtualMC::GetMC()->Gspos("USL4",2,"UTI1", xpos,ypos,zpos,        0,"ONLY");
1636   TVirtualMC::GetMC()->Gspos("USL4",4,"UTI2", xpos,ypos,zpos,        0,"ONLY");
1637   TVirtualMC::GetMC()->Gspos("USL4",6,"UTI3", xpos,ypos,zpos,        0,"ONLY");
1638   TVirtualMC::GetMC()->Gspos("USL4",8,"UTI4", xpos,ypos,zpos,        0,"ONLY");
1639
1640   //
1641   // Aluminum plates in the front part of the super modules
1642   //
1643
1644   const Int_t kNparTrd = 4;
1645   Float_t parTrd[kNparTrd];
1646   parTrd[0] = fgkSwidth1/2.0 - 2.5;
1647   parTrd[1] = fgkSwidth2/2.0 - 2.5;
1648   parTrd[2] = fgkSMpltT /2.0;
1649   parTrd[3] = fgkSheight/2.0 - 1.0;
1650   TVirtualMC::GetMC()->Gsvolu("UTA1","TRD1",idtmed[1301-1],parTrd,kNparTrd);
1651   xpos      =  0.0;
1652   ypos      =  fgkSMpltT/2.0 - fgkFlength/2.0;
1653   zpos      = -0.5;
1654   TVirtualMC::GetMC()->Gspos("UTA1",1,"UTF1",xpos, ypos,zpos,        0,"ONLY");
1655   TVirtualMC::GetMC()->Gspos("UTA1",2,"UTF2",xpos,-ypos,zpos,        0,"ONLY");
1656
1657   const Int_t kNparPlt = 3;
1658   Float_t parPlt[kNparPlt];
1659   parPlt[0] =  0.0;
1660   parPlt[1] =  0.0;
1661   parPlt[2] =  0.0;
1662   TVirtualMC::GetMC()->Gsvolu("UTA2","BOX ",idtmed[1301-1],parPlt,0);
1663   xpos      =  0.0;
1664   ypos      =  0.0;
1665   zpos      =  fgkSheight/2.0 - fgkSMpltT/2.0;
1666   parPlt[0] = fgkSwidth2/2.0 - 0.2;
1667   parPlt[1] = fgkFlength/2.0;
1668   parPlt[2] = fgkSMpltT /2.0;
1669   TVirtualMC::GetMC()->Gsposp("UTA2",1,"UTF2",xpos,ypos,zpos
1670                     ,        0,"ONLY",parPlt,kNparPlt);
1671   xpos      = (fgkSwidth1 + fgkSwidth2)/4.0 - fgkSMpltT/2.0 - 0.0016;
1672   ypos      =  0.0;
1673   zpos      =  0.0;
1674   parPlt[0] = fgkSMpltT /2.0;
1675   parPlt[1] = fgkFlength/2.0;
1676   parPlt[2] = fgkSheight/2.0;
1677   TVirtualMC::GetMC()->Gsposp("UTA2",2,"UTF2", xpos,ypos,zpos
1678                     ,matrix[0],"ONLY",parPlt,kNparPlt);
1679   TVirtualMC::GetMC()->Gsposp("UTA2",3,"UTF2",-xpos,ypos,zpos
1680                     ,matrix[1],"ONLY",parPlt,kNparPlt);
1681
1682   // Additional aluminum bar
1683   parBOX[0] = 80.0/2.0;
1684   parBOX[1] =  1.0/2.0;
1685   parBOX[2] = 10.0/2.0;
1686   TVirtualMC::GetMC()->Gsvolu("UTA3","BOX ",idtmed[1301-1],parBOX,kNparBOX);
1687   xpos      =  0.0;
1688   ypos      =  1.0/2.0 + fgkSMpltT - fgkFlength/2.0;
1689   zpos      =  fgkSheight/2.0 - 1.5 - 10.0/2.0;
1690   TVirtualMC::GetMC()->Gspos("UTA3",1,"UTF1", xpos, ypos, zpos,        0,"ONLY");
1691   TVirtualMC::GetMC()->Gspos("UTA3",2,"UTF2", xpos,-ypos, zpos,        0,"ONLY");
1692
1693 }
1694
1695 //_____________________________________________________________________________
1696 void AliTRDgeometry::CreateServices(Int_t *idtmed)
1697 {
1698   //
1699   // Create the geometry of the services
1700   //
1701   // Names of the TRD services volumina
1702   //
1703   //        UTC1    Cooling arterias (Al)
1704   //        UTC2    Cooling arterias (Water)
1705   //        UUxx    Volumes for the services at the chambers (Air)
1706   //        UMCM    Readout MCMs     (G10/Cu/Si)
1707   //        UDCS    DCSs boards      (G10/Cu)
1708   //        UTP1    Power bars       (Cu)
1709   //        UTCP    Cooling pipes    (Fe)
1710   //        UTCH    Cooling pipes    (Water)
1711   //        UTPL    Power lines      (Cu)
1712   //        UTGD    Gas distribution box (V2A)
1713   //
1714
1715   Int_t   ilayer = 0;
1716   Int_t   istack = 0;
1717
1718   Float_t xpos  = 0.0;
1719   Float_t ypos  = 0.0;
1720   Float_t zpos  = 0.0;
1721
1722   const Int_t kTag = 100;
1723   Char_t  cTagV[kTag];
1724
1725   const Int_t kNparBox  = 3;
1726   Float_t parBox[kNparBox];
1727
1728   const Int_t kNparTube = 3;
1729   Float_t parTube[kNparTube];
1730
1731   // Services inside the baby frame
1732   const Float_t kBBMdz = 223.0;
1733   const Float_t kBBSdz =   8.5;
1734
1735   // Services inside the back frame
1736   const Float_t kBFMdz = 118.0;
1737   const Float_t kBFSdz =   8.5;
1738
1739   // The rotation matrices
1740   const Int_t kNmatrix = 10;
1741   Int_t   matrix[kNmatrix];
1742   TVirtualMC::GetMC()->Matrix(matrix[0], 100.0,   0.0,  90.0,  90.0,  10.0,   0.0); // rotation around y-axis
1743   TVirtualMC::GetMC()->Matrix(matrix[1],  80.0,   0.0,  90.0,  90.0,  10.0, 180.0); // rotation around y-axis
1744   TVirtualMC::GetMC()->Matrix(matrix[2],   0.0,   0.0,  90.0,  90.0,  90.0,   0.0);
1745   TVirtualMC::GetMC()->Matrix(matrix[3], 180.0,   0.0,  90.0,  90.0,  90.0, 180.0);
1746   TVirtualMC::GetMC()->Matrix(matrix[4],  90.0,   0.0,   0.0,   0.0,  90.0,  90.0);
1747   TVirtualMC::GetMC()->Matrix(matrix[5], 100.0,   0.0,  90.0, 270.0,  10.0,   0.0);
1748   TVirtualMC::GetMC()->Matrix(matrix[6],  80.0,   0.0,  90.0, 270.0,  10.0, 180.0);
1749   TVirtualMC::GetMC()->Matrix(matrix[7],  90.0,  10.0,  90.0, 100.0,   0.0,   0.0); // rotation around z-axis
1750   TVirtualMC::GetMC()->Matrix(matrix[8],  90.0, 350.0,  90.0,  80.0,   0.0,   0.0); // rotation around z-axis
1751   TVirtualMC::GetMC()->Matrix(matrix[9],  90.0,  90.0,  90.0, 180.0,   0.0,   0.0); // rotation around z-axis
1752
1753   //
1754   // The cooling arterias
1755   //
1756
1757   // Width of the cooling arterias
1758   const Float_t kCOLwid  =  0.8;
1759   // Height of the cooling arterias
1760   const Float_t kCOLhgt  =  6.5;
1761   // Positioning of the cooling
1762   const Float_t kCOLposx =  1.0;
1763   const Float_t kCOLposz = -1.2;
1764   // Thickness of the walls of the cooling arterias
1765   const Float_t kCOLthk  =  0.1;
1766   const Int_t   kNparCOL =  3;
1767   Float_t parCOL[kNparCOL];
1768   parCOL[0] = 0.0;
1769   parCOL[1] = 0.0;
1770   parCOL[2] = 0.0;
1771   TVirtualMC::GetMC()->Gsvolu("UTC1","BOX ",idtmed[1308-1],parCOL,0);
1772   TVirtualMC::GetMC()->Gsvolu("UTC3","BOX ",idtmed[1308-1],parCOL,0);
1773   parCOL[0] =  kCOLwid/2.0 - kCOLthk;
1774   parCOL[1] = -1.0;
1775   parCOL[2] =  kCOLhgt/2.0 - kCOLthk;
1776   TVirtualMC::GetMC()->Gsvolu("UTC2","BOX ",idtmed[1314-1],parCOL,kNparCOL);
1777   TVirtualMC::GetMC()->Gsvolu("UTC4","BOX ",idtmed[1314-1],parCOL,kNparCOL);
1778
1779   xpos  = 0.0;
1780   ypos  = 0.0;
1781   zpos  = 0.0;
1782   TVirtualMC::GetMC()->Gspos("UTC2",1,"UTC1", xpos,ypos,zpos,0,"ONLY");
1783   TVirtualMC::GetMC()->Gspos("UTC4",1,"UTC3", xpos,ypos,zpos,0,"ONLY");
1784
1785   for (ilayer = 1; ilayer < kNlayer; ilayer++) {
1786
1787     // Along the chambers
1788     xpos      = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx;
1789     ypos      = 0.0;
1790     zpos      = fgkVrocsm + fgkSMpltT - fgkCalZpos
1791               + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz
1792               + ilayer * (fgkCH + fgkVspace);
1793     parCOL[0] = kCOLwid   /2.0;
1794     parCOL[1] = fgkSlength/2.0;
1795     parCOL[2] = kCOLhgt   /2.0;
1796     TVirtualMC::GetMC()->Gsposp("UTC1",ilayer           ,"UTI1", xpos,ypos,zpos
1797                       ,matrix[0],"ONLY",parCOL,kNparCOL);
1798     TVirtualMC::GetMC()->Gsposp("UTC1",ilayer+   kNlayer,"UTI1",-xpos,ypos,zpos
1799                       ,matrix[1],"ONLY",parCOL,kNparCOL);
1800     TVirtualMC::GetMC()->Gsposp("UTC1",ilayer+ 6*kNlayer,"UTI2", xpos,ypos,zpos
1801                       ,matrix[0],"ONLY",parCOL,kNparCOL);
1802     TVirtualMC::GetMC()->Gsposp("UTC1",ilayer+ 7*kNlayer,"UTI2",-xpos,ypos,zpos
1803                       ,matrix[1],"ONLY",parCOL,kNparCOL);
1804     TVirtualMC::GetMC()->Gsposp("UTC1",ilayer+ 8*kNlayer,"UTI3", xpos,ypos,zpos
1805                       ,matrix[0],"ONLY",parCOL,kNparCOL);
1806     TVirtualMC::GetMC()->Gsposp("UTC1",ilayer+ 9*kNlayer,"UTI3",-xpos,ypos,zpos
1807                       ,matrix[1],"ONLY",parCOL,kNparCOL);
1808     TVirtualMC::GetMC()->Gsposp("UTC1",ilayer+10*kNlayer,"UTI4", xpos,ypos,zpos
1809                       ,matrix[0],"ONLY",parCOL,kNparCOL);
1810     TVirtualMC::GetMC()->Gsposp("UTC1",ilayer+11*kNlayer,"UTI4",-xpos,ypos,zpos
1811                       ,matrix[1],"ONLY",parCOL,kNparCOL);
1812
1813     // Front of supermodules
1814     xpos      = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx;
1815     ypos      = 0.0;
1816     zpos      = fgkVrocsm + fgkSMpltT - fgkCalZpos
1817               + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz
1818               + ilayer * (fgkCH + fgkVspace);
1819     parCOL[0] = kCOLwid   /2.0;
1820     parCOL[1] = fgkFlength/2.0;
1821     parCOL[2] = kCOLhgt   /2.0;
1822     TVirtualMC::GetMC()->Gsposp("UTC3",ilayer+2*kNlayer,"UTF1", xpos,ypos,zpos
1823                       ,matrix[0],"ONLY",parCOL,kNparCOL);
1824     TVirtualMC::GetMC()->Gsposp("UTC3",ilayer+3*kNlayer,"UTF1",-xpos,ypos,zpos
1825                       ,matrix[1],"ONLY",parCOL,kNparCOL);
1826     TVirtualMC::GetMC()->Gsposp("UTC3",ilayer+4*kNlayer,"UTF2", xpos,ypos,zpos
1827                       ,matrix[0],"ONLY",parCOL,kNparCOL);
1828     TVirtualMC::GetMC()->Gsposp("UTC3",ilayer+5*kNlayer,"UTF2",-xpos,ypos,zpos
1829                       ,matrix[1],"ONLY",parCOL,kNparCOL);
1830
1831   }
1832
1833   for (ilayer = 1; ilayer < kNlayer; ilayer++) {
1834
1835     // In baby frame
1836     xpos      = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx - 2.5;
1837     ypos      = kBBSdz/2.0 - kBBMdz/2.0;
1838     zpos      = fgkVrocsm + fgkSMpltT - fgkCalZpos
1839               + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz
1840               + ilayer * (fgkCH + fgkVspace);
1841     parCOL[0] = kCOLwid/2.0;
1842     parCOL[1] = kBBSdz /2.0;
1843     parCOL[2] = kCOLhgt/2.0;
1844     TVirtualMC::GetMC()->Gsposp("UTC3",ilayer+6*kNlayer,"BBTRD", xpos, ypos, zpos
1845                       ,matrix[0],"ONLY",parCOL,kNparCOL);
1846     TVirtualMC::GetMC()->Gsposp("UTC3",ilayer+7*kNlayer,"BBTRD",-xpos, ypos, zpos
1847                       ,matrix[1],"ONLY",parCOL,kNparCOL);
1848
1849   }
1850
1851   for (ilayer = 1; ilayer < kNlayer; ilayer++) {
1852
1853     // In back frame
1854     xpos      = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 + kCOLposx - 0.3;
1855     ypos      = -kBFSdz/2.0 + kBFMdz/2.0;
1856     zpos      = fgkVrocsm + fgkSMpltT - fgkCalZpos
1857               + kCOLhgt/2.0 - fgkSheight/2.0 + kCOLposz
1858               + ilayer * (fgkCH + fgkVspace);
1859     parCOL[0] = kCOLwid/2.0;
1860     parCOL[1] = kBFSdz /2.0;
1861     parCOL[2] = kCOLhgt/2.0;
1862     TVirtualMC::GetMC()->Gsposp("UTC3",ilayer+6*kNlayer,"BFTRD", xpos,ypos,zpos
1863                       ,matrix[0],"ONLY",parCOL,kNparCOL);
1864     TVirtualMC::GetMC()->Gsposp("UTC3",ilayer+7*kNlayer,"BFTRD",-xpos,ypos,zpos
1865                       ,matrix[1],"ONLY",parCOL,kNparCOL);
1866
1867   }
1868
1869   // The upper most layer
1870   // Along the chambers
1871   xpos      = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3;
1872   ypos      = 0.0;
1873   zpos      = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0;
1874   parCOL[0] = kCOLwid   /2.0;
1875   parCOL[1] = fgkSlength/2.0;
1876   parCOL[2] = kCOLhgt   /2.0;
1877   TVirtualMC::GetMC()->Gsposp("UTC1",6           ,"UTI1", xpos,ypos,zpos
1878                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1879   TVirtualMC::GetMC()->Gsposp("UTC1",6+   kNlayer,"UTI1",-xpos,ypos,zpos
1880                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1881   TVirtualMC::GetMC()->Gsposp("UTC1",6+ 6*kNlayer,"UTI2", xpos,ypos,zpos
1882                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1883   TVirtualMC::GetMC()->Gsposp("UTC1",6+ 7*kNlayer,"UTI2",-xpos,ypos,zpos
1884                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1885   TVirtualMC::GetMC()->Gsposp("UTC1",6+ 8*kNlayer,"UTI3", xpos,ypos,zpos
1886                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1887   TVirtualMC::GetMC()->Gsposp("UTC1",6+ 9*kNlayer,"UTI3",-xpos,ypos,zpos
1888                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1889   TVirtualMC::GetMC()->Gsposp("UTC1",6+10*kNlayer,"UTI4", xpos,ypos,zpos
1890                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1891   TVirtualMC::GetMC()->Gsposp("UTC1",6+11*kNlayer,"UTI4",-xpos,ypos,zpos
1892                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1893   // Front of supermodules
1894   xpos      = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3;
1895   ypos      = 0.0;
1896   zpos      = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0;
1897   parCOL[0] = kCOLwid   /2.0;
1898   parCOL[1] = fgkFlength/2.0;
1899   parCOL[2] = kCOLhgt   /2.0;
1900   TVirtualMC::GetMC()->Gsposp("UTC3",6+ 2*kNlayer,"UTF1", xpos,ypos,zpos
1901                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1902   TVirtualMC::GetMC()->Gsposp("UTC3",6+ 3*kNlayer,"UTF1",-xpos,ypos,zpos
1903                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1904   TVirtualMC::GetMC()->Gsposp("UTC3",6+ 4*kNlayer,"UTF2", xpos,ypos,zpos
1905                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1906   TVirtualMC::GetMC()->Gsposp("UTC3",6+ 5*kNlayer,"UTF2",-xpos,ypos,zpos
1907                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1908   // In baby frame
1909   xpos      = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 3.1;
1910   ypos      = kBBSdz/2.0 - kBBMdz/2.0;
1911   zpos      = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0;
1912   parCOL[0] = kCOLwid/2.0;
1913   parCOL[1] = kBBSdz /2.0;
1914   parCOL[2] = kCOLhgt/2.0;
1915   TVirtualMC::GetMC()->Gsposp("UTC3",6+6*kNlayer,"BBTRD", xpos, ypos, zpos
1916                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1917   TVirtualMC::GetMC()->Gsposp("UTC3",6+7*kNlayer,"BBTRD",-xpos, ypos, zpos
1918                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1919   // In back frame
1920   xpos      = fgkCwidth[5]/2.0 - kCOLhgt/2.0 - 1.3;
1921   ypos      = -kBFSdz/2.0 + kBFMdz/2.0;
1922   zpos      = fgkSheight/2.0 - fgkSMpltT - 0.4 - kCOLwid/2.0;
1923   parCOL[0] = kCOLwid/2.0;
1924   parCOL[1] = kBFSdz /2.0;
1925   parCOL[2] = kCOLhgt/2.0;
1926   TVirtualMC::GetMC()->Gsposp("UTC3",6+6*kNlayer,"BFTRD", xpos,ypos,zpos
1927                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1928   TVirtualMC::GetMC()->Gsposp("UTC3",6+7*kNlayer,"BFTRD",-xpos,ypos,zpos
1929                     ,matrix[3],"ONLY",parCOL,kNparCOL);
1930
1931   //
1932   // The power bus bars
1933   //
1934
1935   const Float_t kPWRwid  =  0.6;
1936   // Increase the height of the power bus bars to take into
1937   // account the material of additional cables, etc.
1938   const Float_t kPWRhgtA =  5.0 + 0.2;
1939   const Float_t kPWRhgtB =  5.0;
1940   const Float_t kPWRposx =  2.0;
1941   const Float_t kPWRposz =  0.1;
1942   const Int_t   kNparPWR =  3;
1943   Float_t parPWR[kNparPWR];
1944   parPWR[0] = 0.0;
1945   parPWR[1] = 0.0;
1946   parPWR[2] = 0.0;
1947   TVirtualMC::GetMC()->Gsvolu("UTP1","BOX ",idtmed[1325-1],parPWR,0);
1948   TVirtualMC::GetMC()->Gsvolu("UTP3","BOX ",idtmed[1325-1],parPWR,0);
1949
1950   for (ilayer = 1; ilayer < kNlayer; ilayer++) {
1951
1952     // Along the chambers
1953     xpos      = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx;
1954     ypos      = 0.0;
1955     zpos      = fgkVrocsm + fgkSMpltT - fgkCalZpos
1956               + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz
1957               + ilayer * (fgkCH + fgkVspace);
1958     parPWR[0] = kPWRwid   /2.0;
1959     parPWR[1] = fgkSlength/2.0;
1960     parPWR[2] = kPWRhgtA  /2.0;
1961     TVirtualMC::GetMC()->Gsposp("UTP1",ilayer           ,"UTI1", xpos,ypos,zpos
1962                       ,matrix[0],"ONLY",parPWR,kNparPWR);
1963     TVirtualMC::GetMC()->Gsposp("UTP1",ilayer+   kNlayer,"UTI1",-xpos,ypos,zpos
1964                       ,matrix[1],"ONLY",parPWR,kNparPWR);
1965     TVirtualMC::GetMC()->Gsposp("UTP1",ilayer+ 6*kNlayer,"UTI2", xpos,ypos,zpos
1966                       ,matrix[0],"ONLY",parPWR,kNparPWR);
1967     TVirtualMC::GetMC()->Gsposp("UTP1",ilayer+ 7*kNlayer,"UTI2",-xpos,ypos,zpos
1968                       ,matrix[1],"ONLY",parPWR,kNparPWR);
1969     TVirtualMC::GetMC()->Gsposp("UTP1",ilayer+ 8*kNlayer,"UTI3", xpos,ypos,zpos
1970                       ,matrix[0],"ONLY",parPWR,kNparPWR);
1971     TVirtualMC::GetMC()->Gsposp("UTP1",ilayer+ 9*kNlayer,"UTI3",-xpos,ypos,zpos
1972                       ,matrix[1],"ONLY",parPWR,kNparPWR);
1973     TVirtualMC::GetMC()->Gsposp("UTP1",ilayer+10*kNlayer,"UTI4", xpos,ypos,zpos
1974                       ,matrix[0],"ONLY",parPWR,kNparPWR);
1975     TVirtualMC::GetMC()->Gsposp("UTP1",ilayer+11*kNlayer,"UTI4",-xpos,ypos,zpos
1976                       ,matrix[1],"ONLY",parPWR,kNparPWR);
1977
1978     // Front of supermodule
1979     xpos      = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx;
1980     ypos      = 0.0;
1981     zpos      = fgkVrocsm + fgkSMpltT - fgkCalZpos
1982               + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz
1983               + ilayer * (fgkCH + fgkVspace);
1984     parPWR[0] = kPWRwid   /2.0;
1985     parPWR[1] = fgkFlength/2.0;
1986     parPWR[2] = kPWRhgtA  /2.0;
1987     TVirtualMC::GetMC()->Gsposp("UTP3",ilayer+ 2*kNlayer,"UTF1", xpos,ypos,zpos
1988                       ,matrix[0],"ONLY",parPWR,kNparPWR);
1989     TVirtualMC::GetMC()->Gsposp("UTP3",ilayer+ 3*kNlayer,"UTF1",-xpos,ypos,zpos
1990                       ,matrix[1],"ONLY",parPWR,kNparPWR);
1991     TVirtualMC::GetMC()->Gsposp("UTP3",ilayer+ 4*kNlayer,"UTF2", xpos,ypos,zpos
1992                       ,matrix[0],"ONLY",parPWR,kNparPWR);
1993     TVirtualMC::GetMC()->Gsposp("UTP3",ilayer+ 5*kNlayer,"UTF2",-xpos,ypos,zpos
1994                       ,matrix[1],"ONLY",parPWR,kNparPWR);
1995
1996   }
1997
1998   for (ilayer = 1; ilayer < kNlayer; ilayer++) {
1999
2000     // In baby frame
2001     xpos      = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx - 2.5;
2002     ypos      = kBBSdz/2.0 - kBBMdz/2.0;
2003     zpos      = fgkVrocsm + fgkSMpltT - fgkCalZpos
2004               + kPWRhgtB/2.0 - fgkSheight/2.0 + kPWRposz
2005               + ilayer * (fgkCH + fgkVspace);
2006     parPWR[0] = kPWRwid /2.0;
2007     parPWR[1] = kBBSdz  /2.0;
2008     parPWR[2] = kPWRhgtB/2.0;
2009     TVirtualMC::GetMC()->Gsposp("UTP3",ilayer+6*kNlayer,"BBTRD", xpos, ypos, zpos
2010                       ,matrix[0],"ONLY",parPWR,kNparPWR);
2011     TVirtualMC::GetMC()->Gsposp("UTP3",ilayer+7*kNlayer,"BBTRD",-xpos, ypos, zpos
2012                       ,matrix[1],"ONLY",parPWR,kNparPWR);
2013
2014   }
2015
2016   for (ilayer = 1; ilayer < kNlayer; ilayer++) {
2017
2018     // In back frame
2019     xpos      = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0 + kPWRposx - 0.3;
2020     ypos      = -kBFSdz/2.0 + kBFMdz/2.0;
2021     zpos      = fgkVrocsm + fgkSMpltT - fgkCalZpos
2022               + kPWRhgtB/2.0 - fgkSheight/2.0 + kPWRposz
2023               + ilayer * (fgkCH + fgkVspace);
2024     parPWR[0] = kPWRwid /2.0;
2025     parPWR[1] = kBFSdz  /2.0;
2026     parPWR[2] = kPWRhgtB/2.0;
2027     TVirtualMC::GetMC()->Gsposp("UTP3",ilayer+8*kNlayer,"BFTRD", xpos,ypos,zpos
2028                       ,matrix[0],"ONLY",parPWR,kNparPWR);
2029     TVirtualMC::GetMC()->Gsposp("UTP3",ilayer+9*kNlayer,"BFTRD",-xpos,ypos,zpos
2030                       ,matrix[1],"ONLY",parPWR,kNparPWR);
2031
2032   }
2033
2034   // The upper most layer
2035   // Along the chambers
2036   xpos      = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3;
2037   ypos      = 0.0;
2038   zpos      = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0;
2039   parPWR[0] = kPWRwid   /2.0;
2040   parPWR[1] = fgkSlength/2.0;
2041   parPWR[2] = kPWRhgtB  /2.0 ;
2042   TVirtualMC::GetMC()->Gsposp("UTP1",6           ,"UTI1", xpos,ypos,zpos
2043                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2044   TVirtualMC::GetMC()->Gsposp("UTP1",6+   kNlayer,"UTI1",-xpos,ypos,zpos
2045                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2046   TVirtualMC::GetMC()->Gsposp("UTP1",6+ 6*kNlayer,"UTI2", xpos,ypos,zpos
2047                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2048   TVirtualMC::GetMC()->Gsposp("UTP1",6+ 7*kNlayer,"UTI2",-xpos,ypos,zpos
2049                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2050   TVirtualMC::GetMC()->Gsposp("UTP1",6+ 8*kNlayer,"UTI3", xpos,ypos,zpos
2051                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2052   TVirtualMC::GetMC()->Gsposp("UTP1",6+ 9*kNlayer,"UTI3",-xpos,ypos,zpos
2053                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2054   TVirtualMC::GetMC()->Gsposp("UTP1",6+10*kNlayer,"UTI4", xpos,ypos,zpos
2055                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2056   TVirtualMC::GetMC()->Gsposp("UTP1",6+11*kNlayer,"UTI4",-xpos,ypos,zpos
2057                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2058   // Front of supermodules
2059   xpos      = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3;
2060   ypos      = 0.0;
2061   zpos      = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0;
2062   parPWR[0] = kPWRwid   /2.0;
2063   parPWR[1] = fgkFlength/2.0;
2064   parPWR[2] = kPWRhgtB  /2.0;
2065   TVirtualMC::GetMC()->Gsposp("UTP3",6+2*kNlayer,"UTF1", xpos,ypos,zpos
2066                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2067   TVirtualMC::GetMC()->Gsposp("UTP3",6+3*kNlayer,"UTF1",-xpos,ypos,zpos
2068                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2069   TVirtualMC::GetMC()->Gsposp("UTP3",6+4*kNlayer,"UTF2", xpos,ypos,zpos
2070                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2071   TVirtualMC::GetMC()->Gsposp("UTP3",6+5*kNlayer,"UTF2",-xpos,ypos,zpos
2072                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2073   // In baby frame
2074   xpos      = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 3.0;
2075   ypos      = kBBSdz/2.0 - kBBMdz/2.0;
2076   zpos      = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0;
2077   parPWR[0] = kPWRwid /2.0;
2078   parPWR[1] = kBBSdz  /2.0;
2079   parPWR[2] = kPWRhgtB/2.0;
2080   TVirtualMC::GetMC()->Gsposp("UTP3",6+6*kNlayer,"BBTRD", xpos, ypos, zpos
2081                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2082   TVirtualMC::GetMC()->Gsposp("UTP3",6+7*kNlayer,"BBTRD",-xpos, ypos, zpos
2083                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2084   // In back frame
2085   xpos      = fgkCwidth[5]/2.0 + kPWRhgtB/2.0 - 1.3;
2086   ypos      = -kBFSdz/2.0 + kBFMdz/2.0;
2087   zpos      = fgkSheight/2.0 - fgkSMpltT - 0.6 - kPWRwid/2.0;
2088   parPWR[0] = kPWRwid /2.0;
2089   parPWR[1] = kBFSdz  /2.0;
2090   parPWR[2] = kPWRhgtB/2.0;
2091   TVirtualMC::GetMC()->Gsposp("UTP3",6+8*kNlayer,"BFTRD", xpos,ypos,zpos
2092                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2093   TVirtualMC::GetMC()->Gsposp("UTP3",6+9*kNlayer,"BFTRD",-xpos,ypos,zpos
2094                     ,matrix[3],"ONLY",parPWR,kNparPWR);
2095
2096   //
2097   // The gas tubes connecting the chambers in the super modules with holes
2098   // Material: Stainless steel
2099   //
2100
2101   // PHOS holes
2102   parTube[0] = 0.0;
2103   parTube[1] = 2.2/2.0;
2104   parTube[2] = fgkClength[5][2]/2.0 - fgkHspace/2.0;
2105   TVirtualMC::GetMC()->Gsvolu("UTG1","TUBE",idtmed[1308-1],parTube,kNparTube);
2106   parTube[0] = 0.0;
2107   parTube[1] = 2.1/2.0;
2108   parTube[2] = fgkClength[5][2]/2.0 - fgkHspace/2.0;
2109   TVirtualMC::GetMC()->Gsvolu("UTG2","TUBE",idtmed[1309-1],parTube,kNparTube);
2110   xpos  = 0.0;
2111   ypos  = 0.0;
2112   zpos  = 0.0;
2113   TVirtualMC::GetMC()->Gspos("UTG2",1,"UTG1",xpos,ypos,zpos,0,"ONLY");
2114   for (ilayer = 0; ilayer < kNlayer; ilayer++) {
2115     xpos      = fgkCwidth[ilayer]/2.0 + kCOLwid/2.0 - 1.5;
2116     ypos      = 0.0;
2117     zpos      = fgkVrocsm + fgkSMpltT + kCOLhgt/2.0 - fgkSheight/2.0 + 5.0
2118               + ilayer * (fgkCH + fgkVspace);
2119     TVirtualMC::GetMC()->Gspos("UTG1",1+ilayer,"UTI3", xpos, ypos, zpos,matrix[4],"ONLY");
2120     TVirtualMC::GetMC()->Gspos("UTG1",7+ilayer,"UTI3",-xpos, ypos, zpos,matrix[4],"ONLY");
2121   }
2122   // Missing L4S4 chamber in sector 17
2123   parTube[0] = 0.0;
2124   parTube[1] = 2.2/2.0;
2125   parTube[2] = fgkClength[4][4]/2.0 - fgkHspace/2.0;
2126   TVirtualMC::GetMC()->Gsvolu("UTG3","TUBE",idtmed[1308-1],parTube,kNparTube);
2127   parTube[0] = 0.0;
2128   parTube[1] = 2.1/2.0;
2129   parTube[2] = fgkClength[4][4]/2.0 - fgkHspace/2.0;
2130   TVirtualMC::GetMC()->Gsvolu("UTG4","TUBE",idtmed[1309-1],parTube,kNparTube);
2131   xpos  = 0.0;
2132   ypos  = 0.0;
2133   zpos  = 0.0;
2134   TVirtualMC::GetMC()->Gspos("UTG4",1,"UTG3",xpos,ypos,zpos,0,"ONLY");
2135   xpos  = fgkCwidth[4]/2.0 + kCOLwid/2.0 - 1.5;
2136   ypos  = -fgkClength[4][0]/2.0 - fgkClength[4][1] - fgkClength[4][2]/2.0;
2137   zpos  = fgkVrocsm + fgkSMpltT + kCOLhgt/2.0 - fgkSheight/2.0 + 5.0 + 4 * (fgkCH + fgkVspace);
2138   TVirtualMC::GetMC()->Gspos("UTG3",1,"UTI4", xpos, ypos, zpos,matrix[4],"ONLY");
2139   TVirtualMC::GetMC()->Gspos("UTG4",2,"UTI4",-xpos, ypos, zpos,matrix[4],"ONLY");
2140
2141   //
2142   // The volumes for the services at the chambers
2143   //
2144
2145   const Int_t kNparServ = 3;
2146   Float_t parServ[kNparServ];
2147
2148   for (istack = 0; istack < kNstack; istack++) {
2149     for (ilayer = 0; ilayer < kNlayer; ilayer++) {
2150
2151       Int_t iDet = GetDetectorSec(ilayer,istack);
2152
2153       snprintf(cTagV,kTag,"UU%02d",iDet);
2154       parServ[0] = fgkCwidth[ilayer]         /2.0;
2155       parServ[1] = fgkClength[ilayer][istack]/2.0 - fgkHspace/2.0;
2156       parServ[2] = fgkCsvH                 /2.0;
2157       TVirtualMC::GetMC()->Gsvolu(cTagV,"BOX",idtmed[1302-1],parServ,kNparServ);
2158
2159     }
2160   }
2161
2162   //
2163   // The cooling pipes inside the service volumes
2164   //
2165
2166   // The cooling pipes
2167   parTube[0] =  0.0;
2168   parTube[1] =  0.0;
2169   parTube[2] =  0.0;
2170   TVirtualMC::GetMC()->Gsvolu("UTCP","TUBE",idtmed[1324-1],parTube,0);
2171   // The cooling water
2172   parTube[0] =  0.0;
2173   parTube[1] =  0.2/2.0;
2174   parTube[2] = -1.0;
2175   TVirtualMC::GetMC()->Gsvolu("UTCH","TUBE",idtmed[1314-1],parTube,kNparTube);
2176   // Water inside the cooling pipe
2177   xpos = 0.0;
2178   ypos = 0.0;
2179   zpos = 0.0;
2180   TVirtualMC::GetMC()->Gspos("UTCH",1,"UTCP",xpos,ypos,zpos,0,"ONLY");
2181
2182   // Position the cooling pipes in the mother volume
2183   for (istack = 0; istack < kNstack; istack++) {
2184     for (ilayer = 0; ilayer < kNlayer; ilayer++) {
2185       Int_t   iDet    = GetDetectorSec(ilayer,istack);
2186       Int_t   iCopy   = GetDetector(ilayer,istack,0) * 100;
2187       Int_t   nMCMrow = GetRowMax(ilayer,istack,0);
2188       Float_t ySize   = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW)
2189                       / ((Float_t) nMCMrow);
2190       snprintf(cTagV,kTag,"UU%02d",iDet);
2191       for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) {
2192         xpos   = 0.0;
2193         ypos   = (0.5 + iMCMrow) * ySize
2194                - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0;
2195         zpos   = 0.0 + 0.742/2.0;
2196         // The cooling pipes
2197         parTube[0] = 0.0;
2198         parTube[1] = 0.3/2.0; // Thickness of the cooling pipes
2199         parTube[2] = fgkCwidth[ilayer]/2.0;
2200         TVirtualMC::GetMC()->Gsposp("UTCP",iCopy+iMCMrow,cTagV,xpos,ypos,zpos
2201                           ,matrix[2],"ONLY",parTube,kNparTube);
2202       }
2203     }
2204   }
2205
2206   //
2207   // The power lines
2208   //
2209
2210   // The copper power lines
2211   parTube[0] = 0.0;
2212   parTube[1] = 0.0;
2213   parTube[2] = 0.0;
2214   TVirtualMC::GetMC()->Gsvolu("UTPL","TUBE",idtmed[1305-1],parTube,0);
2215
2216   // Position the power lines in the mother volume
2217   for (istack = 0; istack < kNstack; istack++) {
2218     for (ilayer = 0; ilayer < kNlayer; ilayer++) {
2219       Int_t   iDet    = GetDetectorSec(ilayer,istack);
2220       Int_t   iCopy   = GetDetector(ilayer,istack,0) * 100;
2221       Int_t   nMCMrow = GetRowMax(ilayer,istack,0);
2222       Float_t ySize   = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW)
2223                       / ((Float_t) nMCMrow);
2224       snprintf(cTagV,kTag,"UU%02d",iDet);
2225       for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) {
2226         xpos       = 0.0;
2227         ypos       = (0.5 + iMCMrow) * ySize - 1.0
2228                    - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0;
2229         zpos       = -0.4 + 0.742/2.0;
2230         parTube[0] = 0.0;
2231         parTube[1] = 0.2/2.0; // Thickness of the power lines
2232         parTube[2] = fgkCwidth[ilayer]/2.0;
2233         TVirtualMC::GetMC()->Gsposp("UTPL",iCopy+iMCMrow,cTagV,xpos,ypos,zpos
2234                           ,matrix[2],"ONLY",parTube,kNparTube);
2235       }
2236     }
2237   }
2238
2239   //
2240   // The MCMs
2241   //
2242
2243   const Float_t kMCMx    = 3.0;
2244   const Float_t kMCMy    = 3.0;
2245   const Float_t kMCMz    = 0.3;
2246
2247   const Float_t kMCMpcTh = 0.1;
2248   const Float_t kMCMcuTh = 0.0025;
2249   const Float_t kMCMsiTh = 0.03;
2250   const Float_t kMCMcoTh = 0.04;
2251
2252   // The mother volume for the MCMs (air)
2253   const Int_t kNparMCM = 3;
2254   Float_t parMCM[kNparMCM];
2255   parMCM[0] = kMCMx   /2.0;
2256   parMCM[1] = kMCMy   /2.0;
2257   parMCM[2] = kMCMz   /2.0;
2258   TVirtualMC::GetMC()->Gsvolu("UMCM","BOX",idtmed[1302-1],parMCM,kNparMCM);
2259
2260   // The MCM carrier G10 layer
2261   parMCM[0] = kMCMx   /2.0;
2262   parMCM[1] = kMCMy   /2.0;
2263   parMCM[2] = kMCMpcTh/2.0;
2264   TVirtualMC::GetMC()->Gsvolu("UMC1","BOX",idtmed[1319-1],parMCM,kNparMCM);
2265   // The MCM carrier Cu layer
2266   parMCM[0] = kMCMx   /2.0;
2267   parMCM[1] = kMCMy   /2.0;
2268   parMCM[2] = kMCMcuTh/2.0;
2269   TVirtualMC::GetMC()->Gsvolu("UMC2","BOX",idtmed[1318-1],parMCM,kNparMCM);
2270   // The silicon of the chips
2271   parMCM[0] = kMCMx   /2.0;
2272   parMCM[1] = kMCMy   /2.0;
2273   parMCM[2] = kMCMsiTh/2.0;
2274   TVirtualMC::GetMC()->Gsvolu("UMC3","BOX",idtmed[1320-1],parMCM,kNparMCM);
2275   // The aluminum of the cooling plates
2276   parMCM[0] = kMCMx   /2.0;
2277   parMCM[1] = kMCMy   /2.0;
2278   parMCM[2] = kMCMcoTh/2.0;
2279   TVirtualMC::GetMC()->Gsvolu("UMC4","BOX",idtmed[1324-1],parMCM,kNparMCM);
2280
2281   // Put the MCM material inside the MCM mother volume
2282   xpos  =  0.0;
2283   ypos  =  0.0;
2284   zpos  = -kMCMz   /2.0 + kMCMpcTh/2.0;
2285   TVirtualMC::GetMC()->Gspos("UMC1",1,"UMCM",xpos,ypos,zpos,0,"ONLY");
2286   zpos +=  kMCMpcTh/2.0 + kMCMcuTh/2.0;
2287   TVirtualMC::GetMC()->Gspos("UMC2",1,"UMCM",xpos,ypos,zpos,0,"ONLY");
2288   zpos +=  kMCMcuTh/2.0 + kMCMsiTh/2.0;
2289   TVirtualMC::GetMC()->Gspos("UMC3",1,"UMCM",xpos,ypos,zpos,0,"ONLY");
2290   zpos +=  kMCMsiTh/2.0 + kMCMcoTh/2.0;
2291   TVirtualMC::GetMC()->Gspos("UMC4",1,"UMCM",xpos,ypos,zpos,0,"ONLY");
2292
2293   // Position the MCMs in the mother volume
2294   for (istack = 0; istack < kNstack; istack++) {
2295     for (ilayer = 0; ilayer < kNlayer; ilayer++) {
2296       Int_t   iDet    = GetDetectorSec(ilayer,istack);
2297       Int_t   iCopy   = GetDetector(ilayer,istack,0) * 1000;
2298       Int_t   nMCMrow = GetRowMax(ilayer,istack,0);
2299       Float_t ySize   = (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW)
2300                       / ((Float_t) nMCMrow);
2301       Int_t   nMCMcol = 8;
2302       Float_t xSize   = (GetChamberWidth(ilayer)         - 2.0*fgkCpadW)
2303                       / ((Float_t) nMCMcol + 6);             // Introduce 6 gaps
2304       Int_t   iMCM[8] = {  1,  2,  3,  5,  8,  9, 10, 12 };  // 0..7 MCM + 6 gap structure
2305       snprintf(cTagV,kTag,"UU%02d",iDet);
2306       for (Int_t iMCMrow = 0; iMCMrow < nMCMrow; iMCMrow++) {
2307         for (Int_t iMCMcol = 0; iMCMcol < nMCMcol; iMCMcol++) {
2308           xpos      = (0.5 + iMCM[iMCMcol]) * xSize + 1.0
2309                     - fgkCwidth[ilayer]/2.0;
2310           ypos      = (0.5 + iMCMrow) * ySize + 1.0
2311                     - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0;
2312           zpos      = -0.4 + 0.742/2.0;
2313           TVirtualMC::GetMC()->Gspos("UMCM",iCopy+iMCMrow*10+iMCMcol,cTagV
2314                            ,xpos,ypos,zpos,0,"ONLY");
2315           // Add two additional smaller cooling pipes on top of the MCMs
2316           // to mimic the meandering structure
2317           xpos      = (0.5 + iMCM[iMCMcol]) * xSize + 1.0
2318                     - fgkCwidth[ilayer]/2.0;
2319           ypos      = (0.5 + iMCMrow) * ySize
2320                     - fgkClength[ilayer][istack]/2.0 + fgkHspace/2.0;
2321           zpos      = 0.0 + 0.742/2.0;
2322           parTube[0] = 0.0;
2323           parTube[1] = 0.3/2.0; // Thickness of the cooling pipes
2324           parTube[2] = kMCMx/2.0;
2325           TVirtualMC::GetMC()->Gsposp("UTCP",iCopy+iMCMrow*10+iMCMcol+ 50,cTagV
2326                             ,xpos,ypos+1.0,zpos
2327                             ,matrix[2],"ONLY",parTube,kNparTube);
2328           TVirtualMC::GetMC()->Gsposp("UTCP",iCopy+iMCMrow*10+iMCMcol+500,cTagV
2329                             ,xpos,ypos+2.0,zpos
2330                             ,matrix[2],"ONLY",parTube,kNparTube);
2331
2332         }
2333       }
2334
2335     }
2336   }
2337
2338   //
2339   // The DCS boards
2340   //
2341
2342   const Float_t kDCSx    =  9.0;
2343   const Float_t kDCSy    = 14.5;
2344   const Float_t kDCSz    =  0.3;
2345
2346   const Float_t kDCSpcTh =  0.15;
2347   const Float_t kDCScuTh =  0.01;
2348   const Float_t kDCScoTh =  0.04;
2349
2350   // The mother volume for the DCSs (air)
2351   const Int_t kNparDCS = 3;
2352   Float_t parDCS[kNparDCS];
2353   parDCS[0] = kDCSx   /2.0;
2354   parDCS[1] = kDCSy   /2.0;
2355   parDCS[2] = kDCSz   /2.0;
2356   TVirtualMC::GetMC()->Gsvolu("UDCS","BOX",idtmed[1302-1],parDCS,kNparDCS);
2357
2358   // The DCS carrier G10 layer
2359   parDCS[0] = kDCSx   /2.0;
2360   parDCS[1] = kDCSy   /2.0;
2361   parDCS[2] = kDCSpcTh/2.0;
2362   TVirtualMC::GetMC()->Gsvolu("UDC1","BOX",idtmed[1319-1],parDCS,kNparDCS);
2363   // The DCS carrier Cu layer
2364   parDCS[0] = kDCSx   /2.0;
2365   parDCS[1] = kDCSy   /2.0;
2366   parDCS[2] = kDCScuTh/2.0;
2367   TVirtualMC::GetMC()->Gsvolu("UDC2","BOX",idtmed[1318-1],parDCS,kNparDCS);
2368   // The aluminum of the cooling plates
2369   parDCS[0] = 5.0     /2.0;
2370   parDCS[1] = 5.0     /2.0;
2371   parDCS[2] = kDCScoTh/2.0;
2372   TVirtualMC::GetMC()->Gsvolu("UDC3","BOX",idtmed[1324-1],parDCS,kNparDCS);
2373
2374   // Put the DCS material inside the DCS mother volume
2375   xpos  =  0.0;
2376   ypos  =  0.0;
2377   zpos  = -kDCSz   /2.0 + kDCSpcTh/2.0;
2378   TVirtualMC::GetMC()->Gspos("UDC1",1,"UDCS",xpos,ypos,zpos,0,"ONLY");
2379   zpos +=  kDCSpcTh/2.0 + kDCScuTh/2.0;
2380   TVirtualMC::GetMC()->Gspos("UDC2",1,"UDCS",xpos,ypos,zpos,0,"ONLY");
2381   zpos +=  kDCScuTh/2.0 + kDCScoTh/2.0;
2382   TVirtualMC::GetMC()->Gspos("UDC3",1,"UDCS",xpos,ypos,zpos,0,"ONLY");
2383
2384   // Put the DCS board in the chamber services mother volume
2385   for (istack = 0; istack < kNstack; istack++) {
2386     for (ilayer = 0; ilayer < kNlayer; ilayer++) {
2387       Int_t   iDet    = GetDetectorSec(ilayer,istack);
2388       Int_t   iCopy   = iDet + 1;
2389       xpos =  fgkCwidth[ilayer]/2.0 - 1.9 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW)
2390                                         / ((Float_t) GetRowMax(ilayer,istack,0));
2391       ypos =  0.05 * fgkClength[ilayer][istack];
2392       zpos =  kDCSz/2.0 - fgkCsvH/2.0;
2393       snprintf(cTagV,kTag,"UU%02d",iDet);
2394       TVirtualMC::GetMC()->Gspos("UDCS",iCopy,cTagV,xpos,ypos,zpos,0,"ONLY");
2395     }
2396   }
2397
2398   //
2399   // The ORI boards
2400   //
2401
2402   const Float_t kORIx    =  4.2;
2403   const Float_t kORIy    = 13.5;
2404   const Float_t kORIz    =  0.3;
2405
2406   const Float_t kORIpcTh =  0.15;
2407   const Float_t kORIcuTh =  0.01;
2408   const Float_t kORIcoTh =  0.04;
2409
2410   // The mother volume for the ORIs (air)
2411   const Int_t kNparORI = 3;
2412   Float_t parORI[kNparORI];
2413   parORI[0] = kORIx   /2.0;
2414   parORI[1] = kORIy   /2.0;
2415   parORI[2] = kORIz   /2.0;
2416   TVirtualMC::GetMC()->Gsvolu("UORI","BOX",idtmed[1302-1],parORI,kNparORI);
2417
2418   // The ORI carrier G10 layer
2419   parORI[0] = kORIx   /2.0;
2420   parORI[1] = kORIy   /2.0;
2421   parORI[2] = kORIpcTh/2.0;
2422   TVirtualMC::GetMC()->Gsvolu("UOR1","BOX",idtmed[1319-1],parORI,kNparORI);
2423   // The ORI carrier Cu layer
2424   parORI[0] = kORIx   /2.0;
2425   parORI[1] = kORIy   /2.0;
2426   parORI[2] = kORIcuTh/2.0;
2427   TVirtualMC::GetMC()->Gsvolu("UOR2","BOX",idtmed[1318-1],parORI,kNparORI);
2428   // The aluminum of the cooling plates
2429   parORI[0] = kORIx   /2.0;
2430   parORI[1] = kORIy   /2.0;
2431   parORI[2] = kORIcoTh/2.0;
2432   TVirtualMC::GetMC()->Gsvolu("UOR3","BOX",idtmed[1324-1],parORI,kNparORI);
2433
2434   // Put the ORI material inside the ORI mother volume
2435   xpos  =  0.0;
2436   ypos  =  0.0;
2437   zpos  = -kORIz   /2.0 + kORIpcTh/2.0;
2438   TVirtualMC::GetMC()->Gspos("UOR1",1,"UORI",xpos,ypos,zpos,0,"ONLY");
2439   zpos +=  kORIpcTh/2.0 + kORIcuTh/2.0;
2440   TVirtualMC::GetMC()->Gspos("UOR2",1,"UORI",xpos,ypos,zpos,0,"ONLY");
2441   zpos +=  kORIcuTh/2.0 + kORIcoTh/2.0;
2442   TVirtualMC::GetMC()->Gspos("UOR3",1,"UORI",xpos,ypos,zpos,0,"ONLY");
2443
2444   // Put the ORI board in the chamber services mother volume
2445   for (istack = 0; istack < kNstack; istack++) {
2446     for (ilayer = 0; ilayer < kNlayer; ilayer++) {
2447       Int_t   iDet    = GetDetectorSec(ilayer,istack);
2448       Int_t   iCopy   = iDet + 1;
2449       xpos =  fgkCwidth[ilayer]/2.0 - 1.92 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW)
2450                                         / ((Float_t) GetRowMax(ilayer,istack,0));
2451       ypos = -16.0;
2452       zpos =  kORIz/2.0 - fgkCsvH/2.0;
2453       snprintf(cTagV,kTag,"UU%02d",iDet);
2454       TVirtualMC::GetMC()->Gspos("UORI",iCopy      ,cTagV,xpos,ypos,zpos,0,"ONLY");
2455       xpos = -fgkCwidth[ilayer]/2.0 + 3.8 * (GetChamberLength(ilayer,istack) - 2.0*fgkRpadW)
2456                                         / ((Float_t) GetRowMax(ilayer,istack,0));
2457       ypos = -16.0;
2458       zpos =  kORIz/2.0 - fgkCsvH/2.0;
2459       snprintf(cTagV,kTag,"UU%02d",iDet);
2460       TVirtualMC::GetMC()->Gspos("UORI",iCopy+kNdet,cTagV,xpos,ypos,zpos,0,"ONLY");
2461     }
2462   }
2463
2464   //
2465   // Services in front of the super module
2466   //
2467
2468   // Gas in-/outlet pipes (INOX)
2469   parTube[0] = 0.0;
2470   parTube[1] = 0.0;
2471   parTube[2] = 0.0;
2472   TVirtualMC::GetMC()->Gsvolu("UTG3","TUBE",idtmed[1308-1],parTube,0);
2473   // The gas inside the in-/outlet pipes (Xe)
2474   parTube[0] =  0.0;
2475   parTube[1] =  1.2/2.0;
2476   parTube[2] = -1.0;
2477   TVirtualMC::GetMC()->Gsvolu("UTG4","TUBE",idtmed[1309-1],parTube,kNparTube);
2478   xpos = 0.0;
2479   ypos = 0.0;
2480   zpos = 0.0;
2481   TVirtualMC::GetMC()->Gspos("UTG4",1,"UTG3",xpos,ypos,zpos,0,"ONLY");
2482   for (ilayer = 0; ilayer < kNlayer-1; ilayer++) {
2483     xpos       = 0.0;
2484     ypos       = fgkClength[ilayer][2]/2.0
2485                + fgkClength[ilayer][1]
2486                + fgkClength[ilayer][0];
2487     zpos       = 9.0 - fgkSheight/2.0
2488                + ilayer * (fgkCH + fgkVspace);
2489     parTube[0] = 0.0;
2490     parTube[1] = 1.5/2.0;
2491     parTube[2] = fgkCwidth[ilayer]/2.0 - 2.5;
2492     TVirtualMC::GetMC()->Gsposp("UTG3",ilayer+1          ,"UTI1", xpos, ypos, zpos
2493                       ,matrix[2],"ONLY",parTube,kNparTube);
2494     TVirtualMC::GetMC()->Gsposp("UTG3",ilayer+1+1*kNlayer,"UTI1", xpos,-ypos, zpos
2495                       ,matrix[2],"ONLY",parTube,kNparTube);
2496     TVirtualMC::GetMC()->Gsposp("UTG3",ilayer+1+2*kNlayer,"UTI2", xpos, ypos, zpos
2497                       ,matrix[2],"ONLY",parTube,kNparTube);
2498     TVirtualMC::GetMC()->Gsposp("UTG3",ilayer+1+3*kNlayer,"UTI2", xpos,-ypos, zpos
2499                       ,matrix[2],"ONLY",parTube,kNparTube);
2500     TVirtualMC::GetMC()->Gsposp("UTG3",ilayer+1+4*kNlayer,"UTI3", xpos, ypos, zpos
2501                       ,matrix[2],"ONLY",parTube,kNparTube);
2502     TVirtualMC::GetMC()->Gsposp("UTG3",ilayer+1+5*kNlayer,"UTI3", xpos,-ypos, zpos
2503                       ,matrix[2],"ONLY",parTube,kNparTube);
2504     TVirtualMC::GetMC()->Gsposp("UTG3",ilayer+1+6*kNlayer,"UTI4", xpos, ypos, zpos
2505                       ,matrix[2],"ONLY",parTube,kNparTube);
2506     TVirtualMC::GetMC()->Gsposp("UTG3",ilayer+1+7*kNlayer,"UTI4", xpos,-ypos, zpos
2507                       ,matrix[2],"ONLY",parTube,kNparTube);
2508   }
2509
2510   // Gas distribution box
2511   parBox[0] = 14.50/2.0;
2512   parBox[1] =  4.52/2.0;
2513   parBox[2] =  5.00/2.0;
2514   TVirtualMC::GetMC()->Gsvolu("UTGD","BOX ",idtmed[1308-1],parBox,kNparBox);
2515   parBox[0] = 14.50/2.0;
2516   parBox[1] =  4.00/2.0;
2517   parBox[2] =  4.40/2.0;
2518   TVirtualMC::GetMC()->Gsvolu("UTGI","BOX ",idtmed[1309-1],parBox,kNparBox);
2519   parTube[0] = 0.0;
2520   parTube[1] = 4.0/2.0;
2521   parTube[2] = 8.0/2.0;
2522   TVirtualMC::GetMC()->Gsvolu("UTGT","TUBE",idtmed[1308-1],parTube,kNparTube);
2523   parTube[0] = 0.0;
2524   parTube[1] = 3.4/2.0;
2525   parTube[2] = 8.0/2.0;
2526   TVirtualMC::GetMC()->Gsvolu("UTGG","TUBE",idtmed[1309-1],parTube,kNparTube);
2527   xpos = 0.0;
2528   ypos = 0.0;
2529   zpos = 0.0;
2530   TVirtualMC::GetMC()->Gspos("UTGI",1,"UTGD",xpos,ypos,zpos,        0,"ONLY");
2531   TVirtualMC::GetMC()->Gspos("UTGG",1,"UTGT",xpos,ypos,zpos,        0,"ONLY");
2532   xpos = 0.0;
2533   ypos = 0.0;
2534   zpos = 0.0;
2535   TVirtualMC::GetMC()->Gspos("UTGD",1,"UTF1",xpos,ypos,zpos,        0,"ONLY");
2536   xpos =  -3.0;
2537   ypos =   0.0;
2538   zpos =   6.5;
2539   TVirtualMC::GetMC()->Gspos("UTGT",1,"UTF1",xpos,ypos,zpos,        0,"ONLY");
2540   xpos = -11.25;
2541   ypos =   0.0;
2542   zpos =   0.5;
2543   TVirtualMC::GetMC()->Gspos("UTGT",3,"UTF1",xpos,ypos,zpos,matrix[2],"ONLY");
2544   xpos =  11.25;
2545   ypos =   0.0;
2546   zpos =   0.5;
2547   TVirtualMC::GetMC()->Gspos("UTGT",5,"UTF1",xpos,ypos,zpos,matrix[2],"ONLY");
2548
2549   // Cooling manifolds
2550   parBox[0]  =  5.0/2.0;
2551   parBox[1]  = 23.0/2.0;
2552   parBox[2]  = 70.0/2.0;
2553   TVirtualMC::GetMC()->Gsvolu("UTCM","BOX ",idtmed[1302-1],parBox,kNparBox);
2554   parBox[0]  =  5.0/2.0;
2555   parBox[1]  =  5.0/2.0;
2556   parBox[2]  = 70.0/2.0;
2557   TVirtualMC::GetMC()->Gsvolu("UTCA","BOX ",idtmed[1308-1],parBox,kNparBox);
2558   parBox[0]  =  5.0/2.0 - 0.3;
2559   parBox[1]  =  5.0/2.0 - 0.3;
2560   parBox[2]  = 70.0/2.0 - 0.3;
2561   TVirtualMC::GetMC()->Gsvolu("UTCW","BOX ",idtmed[1314-1],parBox,kNparBox);
2562   xpos       =  0.0;
2563   ypos       =  0.0;
2564   zpos       =  0.0;
2565   TVirtualMC::GetMC()->Gspos("UTCW",1,"UTCA", xpos, ypos, zpos,        0,"ONLY");
2566   xpos       =  0.0;
2567   ypos       =  5.0/2.0 - 23.0/2.0;
2568   zpos       =  0.0;
2569   TVirtualMC::GetMC()->Gspos("UTCA",1,"UTCM", xpos, ypos, zpos,        0,"ONLY");
2570   parTube[0] =  0.0;
2571   parTube[1] =  3.0/2.0;
2572   parTube[2] = 18.0/2.0;
2573   TVirtualMC::GetMC()->Gsvolu("UTCO","TUBE",idtmed[1308-1],parTube,kNparTube);
2574   parTube[0] =  0.0;
2575   parTube[1] =  3.0/2.0 - 0.3;
2576   parTube[2] = 18.0/2.0;
2577   TVirtualMC::GetMC()->Gsvolu("UTCL","TUBE",idtmed[1314-1],parTube,kNparTube);
2578   xpos       =  0.0;
2579   ypos       =  0.0;
2580   zpos       =  0.0;
2581   TVirtualMC::GetMC()->Gspos("UTCL",1,"UTCO", xpos, ypos, zpos,        0,"ONLY");
2582   xpos       =  0.0;
2583   ypos       =  2.5;
2584   zpos       = -70.0/2.0 + 7.0;
2585   TVirtualMC::GetMC()->Gspos("UTCO",1,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY");
2586   zpos      +=  7.0;
2587   TVirtualMC::GetMC()->Gspos("UTCO",2,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY");
2588   zpos      +=  7.0;
2589   TVirtualMC::GetMC()->Gspos("UTCO",3,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY");
2590   zpos      +=  7.0;
2591   TVirtualMC::GetMC()->Gspos("UTCO",4,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY");
2592   zpos      +=  7.0;
2593   TVirtualMC::GetMC()->Gspos("UTCO",5,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY");
2594   zpos      +=  7.0;
2595   TVirtualMC::GetMC()->Gspos("UTCO",6,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY");
2596   zpos      +=  7.0;
2597   TVirtualMC::GetMC()->Gspos("UTCO",7,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY");
2598   zpos      +=  7.0;
2599   TVirtualMC::GetMC()->Gspos("UTCO",8,"UTCM", xpos, ypos, zpos,matrix[4],"ONLY");
2600
2601   xpos = 40.0;
2602   ypos =  fgkFlength/2.0 - 23.0/2.0;
2603   zpos =  0.0;
2604   TVirtualMC::GetMC()->Gspos("UTCM",1,"UTF1", xpos, ypos, zpos,matrix[0],"ONLY");
2605   TVirtualMC::GetMC()->Gspos("UTCM",2,"UTF1",-xpos, ypos, zpos,matrix[1],"ONLY");
2606   TVirtualMC::GetMC()->Gspos("UTCM",3,"UTF2", xpos,-ypos, zpos,matrix[5],"ONLY");
2607   TVirtualMC::GetMC()->Gspos("UTCM",4,"UTF2",-xpos,-ypos, zpos,matrix[6],"ONLY");
2608
2609   // Power connection boards (Cu)
2610   parBox[0] =  0.5/2.0;
2611   parBox[1] = 15.0/2.0;
2612   parBox[2] =  7.0/2.0;
2613   TVirtualMC::GetMC()->Gsvolu("UTPC","BOX ",idtmed[1325-1],parBox,kNparBox);
2614   for (ilayer = 0; ilayer < kNlayer-1; ilayer++) {
2615     xpos      = fgkCwidth[ilayer]/2.0 + kPWRwid/2.0;
2616     ypos      = 0.0;
2617     zpos      = fgkVrocsm + fgkSMpltT + kPWRhgtA/2.0 - fgkSheight/2.0 + kPWRposz
2618               + (ilayer+1) * (fgkCH + fgkVspace);
2619     TVirtualMC::GetMC()->Gspos("UTPC",ilayer        ,"UTF1", xpos,ypos,zpos,matrix[0],"ONLY");
2620     TVirtualMC::GetMC()->Gspos("UTPC",ilayer+kNlayer,"UTF1",-xpos,ypos,zpos,matrix[1],"ONLY");
2621   }
2622   xpos      = fgkCwidth[5]/2.0 + kPWRhgtA/2.0 - 2.0;
2623   ypos      = 0.0;
2624   zpos      = fgkSheight/2.0 - fgkSMpltT - 2.0;
2625   TVirtualMC::GetMC()->Gspos("UTPC",5        ,"UTF1", xpos,ypos,zpos,matrix[3],"ONLY");
2626   TVirtualMC::GetMC()->Gspos("UTPC",5+kNlayer,"UTF1",-xpos,ypos,zpos,matrix[3],"ONLY");
2627
2628   // Power connection panel (Al)
2629   parBox[0] = 60.0/2.0;
2630   parBox[1] = 10.0/2.0;
2631   parBox[2] =  3.0/2.0;
2632   TVirtualMC::GetMC()->Gsvolu("UTPP","BOX ",idtmed[1301-1],parBox,kNparBox);
2633   xpos      =  0.0;
2634   ypos      =  0.0;
2635   zpos      = 18.0;
2636   TVirtualMC::GetMC()->Gspos("UTPP",1,"UTF1", xpos,ypos,zpos,0,"ONLY");
2637
2638   //
2639   // Electronics boxes
2640   //
2641
2642   // Casing (INOX)
2643   parBox[0] = 60.0/2.0;
2644   parBox[1] = 10.0/2.0;
2645   parBox[2] =  6.0/2.0;
2646   TVirtualMC::GetMC()->Gsvolu("UTE1","BOX ",idtmed[1308-1],parBox,kNparBox);
2647   // Interior (air)
2648   parBox[0] = parBox[0] - 0.5;
2649   parBox[1] = parBox[1] - 0.5;
2650   parBox[2] = parBox[2] - 0.5;
2651   TVirtualMC::GetMC()->Gsvolu("UTE2","BOX ",idtmed[1302-1],parBox,kNparBox);
2652   xpos      = 0.0;
2653   ypos      = 0.0;
2654   zpos      = 0.0;
2655   TVirtualMC::GetMC()->Gspos("UTE2",1,"UTE1",xpos,ypos,zpos,0,"ONLY");
2656   xpos      = 0.0;
2657   ypos      =  fgkSlength/2.0 - 10.0/2.0 - 3.0;
2658   zpos      = -fgkSheight/2.0 +  6.0/2.0 + 1.0;
2659   TVirtualMC::GetMC()->Gspos("UTE1",1,"UTI1", xpos,ypos,zpos,0,"ONLY");
2660   TVirtualMC::GetMC()->Gspos("UTE1",2,"UTI2", xpos,ypos,zpos,0,"ONLY");
2661   TVirtualMC::GetMC()->Gspos("UTE1",3,"UTI3", xpos,ypos,zpos,0,"ONLY");
2662   TVirtualMC::GetMC()->Gspos("UTE1",4,"UTI4", xpos,ypos,zpos,0,"ONLY");
2663
2664   // Casing (INOX)
2665   parBox[0] = 50.0/2.0;
2666   parBox[1] = 15.0/2.0;
2667   parBox[2] = 20.0/2.0;
2668   TVirtualMC::GetMC()->Gsvolu("UTE3","BOX ",idtmed[1308-1],parBox,kNparBox);
2669   // Interior (air)
2670   parBox[0] = parBox[0] - 0.5;
2671   parBox[1] = parBox[1] - 0.5;
2672   parBox[2] = parBox[2] - 0.5;
2673   TVirtualMC::GetMC()->Gsvolu("UTE4","BOX ",idtmed[1302-1],parBox,kNparBox);
2674   xpos      = 0.0;
2675   ypos      = 0.0;
2676   zpos      = 0.0;
2677   TVirtualMC::GetMC()->Gspos("UTE4",1,"UTE3",xpos,ypos,zpos,0,"ONLY");
2678   xpos      = 0.0;
2679   ypos      = -fgkSlength/2.0 + 15.0/2.0 + 3.0;
2680   zpos      = -fgkSheight/2.0 + 20.0/2.0 + 1.0;
2681   TVirtualMC::GetMC()->Gspos("UTE3",1,"UTI1", xpos,ypos,zpos,0,"ONLY");
2682   TVirtualMC::GetMC()->Gspos("UTE3",2,"UTI2", xpos,ypos,zpos,0,"ONLY");
2683   TVirtualMC::GetMC()->Gspos("UTE3",3,"UTI3", xpos,ypos,zpos,0,"ONLY");
2684   TVirtualMC::GetMC()->Gspos("UTE3",4,"UTI4", xpos,ypos,zpos,0,"ONLY");
2685
2686   // Casing (INOX)
2687   parBox[0] = 20.0/2.0;
2688   parBox[1] =  7.0/2.0;
2689   parBox[2] = 20.0/2.0;
2690   TVirtualMC::GetMC()->Gsvolu("UTE5","BOX ",idtmed[1308-1],parBox,kNparBox);
2691   // Interior (air)
2692   parBox[0] = parBox[0] - 0.5;
2693   parBox[1] = parBox[1] - 0.5;
2694   parBox[2] = parBox[2] - 0.5;
2695   TVirtualMC::GetMC()->Gsvolu("UTE6","BOX ",idtmed[1302-1],parBox,kNparBox);
2696   xpos      = 0.0;
2697   ypos      = 0.0;
2698   zpos      = 0.0;
2699   TVirtualMC::GetMC()->Gspos("UTE6",1,"UTE5",xpos,ypos,zpos,0,"ONLY");
2700   xpos      = 20.0;
2701   ypos      = -fgkSlength/2.0 +  7.0/2.0 + 3.0;
2702   zpos      = 0.0;
2703   TVirtualMC::GetMC()->Gspos("UTE5",1,"UTI1", xpos,ypos,zpos,0,"ONLY");
2704   TVirtualMC::GetMC()->Gspos("UTE5",2,"UTI2", xpos,ypos,zpos,0,"ONLY");
2705   TVirtualMC::GetMC()->Gspos("UTE5",3,"UTI3", xpos,ypos,zpos,0,"ONLY");
2706   TVirtualMC::GetMC()->Gspos("UTE5",4,"UTI4", xpos,ypos,zpos,0,"ONLY");
2707   xpos      = -xpos;
2708   TVirtualMC::GetMC()->Gspos("UTE5",5,"UTI1", xpos,ypos,zpos,0,"ONLY");
2709   TVirtualMC::GetMC()->Gspos("UTE5",6,"UTI2", xpos,ypos,zpos,0,"ONLY");
2710   TVirtualMC::GetMC()->Gspos("UTE5",7,"UTI3", xpos,ypos,zpos,0,"ONLY");
2711   TVirtualMC::GetMC()->Gspos("UTE5",8,"UTI4", xpos,ypos,zpos,0,"ONLY");
2712
2713 }
2714
2715 //_____________________________________________________________________________
2716 void AliTRDgeometry::AssembleChamber(Int_t ilayer, Int_t istack)
2717 {
2718   //
2719   // Group volumes UA, UD, UF, UU into an assembly that defines the
2720   // alignable volume of a single readout chamber
2721   //
2722
2723   const Int_t kTag = 100;
2724   Char_t  cTagV[kTag];
2725   Char_t  cTagM[kTag];
2726
2727   Double_t xpos = 0.0;
2728   Double_t ypos = 0.0;
2729   Double_t zpos = 0.0;
2730
2731   Int_t idet = GetDetectorSec(ilayer,istack);
2732
2733   // Create the assembly for a given ROC
2734   snprintf(cTagM,kTag,"UT%02d",idet);
2735   TGeoVolume *roc = new TGeoVolumeAssembly(cTagM);
2736
2737   // Add the lower part of the chamber (aluminum frame),
2738   // including radiator and drift region
2739   xpos = 0.0;
2740   ypos = 0.0;
2741   zpos = fgkCraH/2.0 + fgkCdrH/2.0 - fgkCHsv/2.0;
2742   snprintf(cTagV,kTag,"UA%02d",idet);
2743   TGeoVolume *rocA = gGeoManager->GetVolume(cTagV);
2744   roc->AddNode(rocA,1,new TGeoTranslation(xpos,ypos,zpos));
2745
2746   // Add the additional aluminum ledges
2747   xpos = fgkCwidth[ilayer]/2.0 + fgkCalWmod/2.0;
2748   ypos = 0.0;
2749   zpos = fgkCraH + fgkCdrH - fgkCalZpos - fgkCalHmod/2.0 - fgkCHsv/2.0;
2750   snprintf(cTagV,kTag,"UZ%02d",idet);
2751   TGeoVolume *rocZ = gGeoManager->GetVolume(cTagV);
2752   roc->AddNode(rocZ,1,new TGeoTranslation( xpos,ypos,zpos));
2753   roc->AddNode(rocZ,2,new TGeoTranslation(-xpos,ypos,zpos));
2754
2755   // Add the additional wacosit ledges
2756   xpos = fgkCwidth[ilayer]/2.0 + fgkCwsW/2.0;
2757   ypos = 0.0;
2758   zpos = fgkCraH + fgkCdrH - fgkCwsH/2.0 - fgkCHsv/2.0;
2759   snprintf(cTagV,kTag,"UP%02d",idet);
2760   TGeoVolume *rocP = gGeoManager->GetVolume(cTagV);
2761   roc->AddNode(rocP,1,new TGeoTranslation( xpos,ypos,zpos));
2762   roc->AddNode(rocP,2,new TGeoTranslation(-xpos,ypos,zpos));
2763
2764   // Add the middle part of the chamber (G10 frame),
2765   // including amplification region
2766   xpos = 0.0;
2767   ypos = 0.0;
2768   zpos = fgkCamH/2.0 + fgkCraH + fgkCdrH - fgkCHsv/2.0;
2769   snprintf(cTagV,kTag,"UD%02d",idet);
2770   TGeoVolume *rocD = gGeoManager->GetVolume(cTagV);
2771   roc->AddNode(rocD,1,new TGeoTranslation(xpos,ypos,zpos));
2772
2773   // Add the upper part of the chamber (aluminum frame),
2774   // including back panel and FEE
2775   xpos = 0.0;
2776   ypos = 0.0;
2777   zpos = fgkCroH/2.0 + fgkCamH + fgkCraH + fgkCdrH - fgkCHsv/2.0;
2778   snprintf(cTagV,kTag,"UF%02d",idet);
2779   TGeoVolume *rocF = gGeoManager->GetVolume(cTagV);
2780   roc->AddNode(rocF,1,new TGeoTranslation(xpos,ypos,zpos));
2781
2782   // Add the volume with services on top of the back panel
2783   xpos = 0.0;
2784   ypos = 0.0;
2785   zpos = fgkCsvH/2.0 + fgkCroH + fgkCamH + fgkCraH + fgkCdrH - fgkCHsv/2.0;
2786   snprintf(cTagV,kTag,"UU%02d",idet);
2787   TGeoVolume *rocU = gGeoManager->GetVolume(cTagV);
2788   roc->AddNode(rocU,1,new TGeoTranslation(xpos,ypos,zpos));
2789
2790   // Place the ROC assembly into the super modules
2791   xpos = 0.0;
2792   ypos = 0.0;
2793   ypos  = fgkClength[ilayer][0] + fgkClength[ilayer][1] + fgkClength[ilayer][2]/2.0;
2794   for (Int_t ic = 0; ic < istack; ic++) {
2795     ypos -= fgkClength[ilayer][ic];
2796   }
2797   ypos -= fgkClength[ilayer][istack]/2.0;
2798   zpos  = fgkVrocsm + fgkSMpltT + fgkCHsv/2.0 - fgkSheight/2.0
2799         + ilayer * (fgkCH + fgkVspace);
2800   TGeoVolume *sm1 = gGeoManager->GetVolume("UTI1");
2801   TGeoVolume *sm2 = gGeoManager->GetVolume("UTI2");
2802   TGeoVolume *sm3 = gGeoManager->GetVolume("UTI3");
2803   TGeoVolume *sm4 = gGeoManager->GetVolume("UTI4");
2804   sm1->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos));
2805   sm2->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos));
2806   if (istack != 2) {
2807     // w/o middle stack
2808     sm3->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos));
2809   }
2810   if (!((ilayer == 4) && (istack == 4))) {
2811     // Sector 17 w/o L4S4 chamber
2812     sm4->AddNode(roc,1,new TGeoTranslation(xpos,ypos,zpos));
2813   }
2814
2815 }
2816
2817 //_____________________________________________________________________________
2818 Bool_t AliTRDgeometry::RotateBack(Int_t det
2819                                 , const Double_t * const loc
2820                                 , Double_t *glb) const
2821 {
2822   //
2823   // Rotates a chambers to transform the corresponding local frame
2824   // coordinates <loc> into the coordinates of the ALICE restframe <glb>.
2825   //
2826
2827   Int_t   sector = GetSector(det);
2828   Float_t phi = 2.0 * TMath::Pi() /  (Float_t) fgkNsector * ((Float_t) sector + 0.5);
2829
2830   glb[0] = loc[0] * TMath::Cos(phi) - loc[1] * TMath::Sin(phi);
2831   glb[1] = loc[0] * TMath::Sin(phi) + loc[1] * TMath::Cos(phi);
2832   glb[2] = loc[2];
2833
2834   return kTRUE;
2835
2836 }
2837
2838 //_____________________________________________________________________________
2839 Int_t AliTRDgeometry::GetDetectorSec(Int_t layer, Int_t stack)
2840 {
2841   //
2842   // Convert plane / stack into detector number for one single sector
2843   //
2844
2845   return (layer + stack * fgkNlayer);
2846
2847 }
2848
2849 //_____________________________________________________________________________
2850 Int_t AliTRDgeometry::GetDetector(Int_t layer, Int_t stack, Int_t sector)
2851 {
2852   //
2853   // Convert layer / stack / sector into detector number
2854   //
2855
2856   return (layer + stack * fgkNlayer + sector * fgkNlayer * fgkNstack);
2857
2858 }
2859
2860 //_____________________________________________________________________________
2861 Int_t AliTRDgeometry::GetLayer(Int_t det)
2862 {
2863   //
2864   // Reconstruct the layer number from the detector number
2865   //
2866
2867   return ((Int_t) (det % fgkNlayer));
2868
2869 }
2870
2871 //_____________________________________________________________________________
2872 Int_t AliTRDgeometry::GetStack(Int_t det)
2873 {
2874   //
2875   // Reconstruct the stack number from the detector number
2876   //
2877
2878   return ((Int_t) (det % (fgkNlayer * fgkNstack)) / fgkNlayer);
2879
2880 }
2881
2882 //_____________________________________________________________________________
2883 Int_t AliTRDgeometry::GetStack(Double_t z, Int_t layer)
2884 {
2885   //
2886   // Reconstruct the chamber number from the z position and layer number
2887   //
2888   // The return function has to be protected for positiveness !!
2889   //
2890
2891   if ((layer <          0) ||
2892       (layer >= fgkNlayer)) return -1;
2893
2894   Int_t    istck = fgkNstack;
2895   Double_t zmin  = 0.0;
2896   Double_t zmax  = 0.0;
2897
2898   do {
2899     istck--;
2900     if (istck < 0) break;
2901     AliTRDpadPlane *pp = GetPadPlane(layer,istck);
2902     zmax  = pp->GetRow0();
2903     Int_t nrows = pp->GetNrows();
2904     zmin = zmax -         2 * pp->GetLengthOPad()
2905                 - (nrows-2) * pp->GetLengthIPad()
2906                 - (nrows-1) * pp->GetRowSpacing();
2907   } while((z < zmin) || (z > zmax));
2908
2909   return istck;
2910
2911 }
2912
2913 //_____________________________________________________________________________
2914 Int_t AliTRDgeometry::GetSector(Int_t det)
2915 {
2916   //
2917   // Reconstruct the sector number from the detector number
2918   //
2919
2920   return ((Int_t) (det / (fgkNlayer * fgkNstack)));
2921
2922 }
2923
2924 //_____________________________________________________________________________
2925 AliTRDpadPlane *AliTRDgeometry::GetPadPlane(Int_t layer, Int_t stack)
2926 {
2927   //
2928   // Returns the pad plane for a given plane <pl> and stack <st> number
2929   //
2930
2931   if (!fgPadPlaneArray) {
2932     CreatePadPlaneArray();
2933   }
2934
2935   Int_t ipp = GetDetectorSec(layer,stack);
2936   return ((AliTRDpadPlane *) fgPadPlaneArray->At(ipp));
2937
2938 }
2939
2940 //_____________________________________________________________________________
2941 Int_t AliTRDgeometry::GetRowMax(Int_t layer, Int_t stack, Int_t /*sector*/)
2942 {
2943   //
2944   // Returns the number of rows on the pad plane
2945   //
2946
2947   return GetPadPlane(layer,stack)->GetNrows();
2948
2949 }
2950
2951 //_____________________________________________________________________________
2952 Int_t AliTRDgeometry::GetColMax(Int_t layer)
2953 {
2954   //
2955   // Returns the number of rows on the pad plane
2956   //
2957
2958   return GetPadPlane(layer,0)->GetNcols();
2959
2960 }
2961
2962 //_____________________________________________________________________________
2963 Double_t AliTRDgeometry::GetRow0(Int_t layer, Int_t stack, Int_t /*sector*/)
2964 {
2965   //
2966   // Returns the position of the border of the first pad in a row
2967   //
2968
2969   return GetPadPlane(layer,stack)->GetRow0();
2970
2971 }
2972
2973 //_____________________________________________________________________________
2974 Double_t AliTRDgeometry::GetCol0(Int_t layer)
2975 {
2976   //
2977   // Returns the position of the border of the first pad in a column
2978   //
2979
2980   return GetPadPlane(layer,0)->GetCol0();
2981
2982 }
2983
2984 //_____________________________________________________________________________
2985 Bool_t AliTRDgeometry::CreateClusterMatrixArray()
2986 {
2987   //
2988   // Create the matrices to transform cluster coordinates from the
2989   // local chamber system to the tracking coordinate system
2990   //
2991
2992   if (!gGeoManager) {
2993     return kFALSE;
2994   }
2995
2996   if(fgClusterMatrixArray)
2997     return kTRUE;
2998
2999   TString volPath;
3000   TString vpStr   = "ALIC_1/B077_1/BSEGMO";
3001   TString vpApp1  = "_1/BTRD";
3002   TString vpApp2  = "_1";
3003   TString vpApp3a = "/UTR1_1/UTS1_1/UTI1_1";
3004   TString vpApp3b = "/UTR2_1/UTS2_1/UTI2_1";
3005   TString vpApp3c = "/UTR3_1/UTS3_1/UTI3_1";
3006   TString vpApp3d = "/UTR4_1/UTS4_1/UTI4_1";
3007
3008   fgClusterMatrixArray = new TObjArray(kNdet);
3009   AliAlignObjParams o;
3010
3011   for (Int_t iLayer = AliGeomManager::kTRD1; iLayer <= AliGeomManager::kTRD6; iLayer++) {
3012     for (Int_t iModule = 0; iModule < AliGeomManager::LayerSize(iLayer); iModule++) {
3013
3014       Int_t        isector   = iModule/Nstack();
3015       Int_t        istack    = iModule%Nstack();
3016       Int_t        iLayerTRD = iLayer - AliGeomManager::kTRD1;
3017       Int_t        lid       = GetDetector(iLayerTRD,istack,isector);
3018
3019       // Check for disabled supermodules
3020       volPath  = vpStr;
3021       volPath += isector;
3022       volPath += vpApp1;
3023       volPath += isector;
3024       volPath += vpApp2;
3025       switch (isector) {
3026       case 17:
3027         if ((istack == 4) && (iLayerTRD == 4)) {
3028           continue;
3029         }
3030         volPath += vpApp3d;
3031         break;
3032       case 13:
3033       case 14:
3034       case 15:
3035         // Check for holes in from of PHOS
3036         if (istack == 2) {
3037           continue;
3038         }
3039         volPath += vpApp3c;
3040         break;
3041       case 11:
3042       case 12:
3043         volPath += vpApp3b;
3044         break;
3045       default:
3046         volPath += vpApp3a;
3047       };
3048       if (!gGeoManager->CheckPath(volPath)) {
3049         continue;
3050       }
3051
3052       UShort_t     volid   = AliGeomManager::LayerToVolUID(iLayer,iModule);
3053       const char  *symname = AliGeomManager::SymName(volid);
3054       TGeoPNEntry *pne     = gGeoManager->GetAlignableEntry(symname);
3055       const char  *path    = symname;
3056       if (pne) {
3057         path = pne->GetTitle();
3058       }
3059       else {
3060         continue;
3061       }
3062       if (!strstr(path,"ALIC")) {
3063         AliDebugClass(1,Form("Not a valid path: %s\n",path));
3064         continue;
3065       }
3066       if (!gGeoManager->cd(path)) {
3067         AliErrorClass(Form("Cannot go to path: %s\n",path));
3068         continue;
3069       }
3070       TGeoHMatrix *m         = gGeoManager->GetCurrentMatrix();
3071
3072       TGeoRotation mchange;
3073       mchange.RotateY(90);
3074       mchange.RotateX(90);
3075
3076       //
3077       // Cluster transformation matrix
3078       //
3079       TGeoHMatrix  rotMatrix(mchange.Inverse());
3080       rotMatrix.MultiplyLeft(m);
3081       Double_t sectorAngle = 20.0 * (isector % 18) + 10.0;
3082       TGeoHMatrix  rotSector;
3083       rotSector.RotateZ(sectorAngle);
3084       rotMatrix.MultiplyLeft(&rotSector.Inverse());
3085
3086       fgClusterMatrixArray->AddAt(new TGeoHMatrix(rotMatrix),lid);
3087
3088     }
3089   }
3090
3091   return kTRUE;
3092
3093 }
3094
3095 //_____________________________________________________________________________
3096 TGeoHMatrix *AliTRDgeometry::GetClusterMatrix(Int_t det)
3097 {
3098   //
3099   // Returns the cluster transformation matrix for a given detector
3100   //
3101
3102   if (!fgClusterMatrixArray) {
3103     if (!CreateClusterMatrixArray()) {
3104       return NULL;
3105     }
3106   }
3107   return (TGeoHMatrix *) fgClusterMatrixArray->At(det);
3108
3109 }
3110
3111 //_____________________________________________________________________________
3112 Bool_t AliTRDgeometry::ChamberInGeometry(Int_t det)
3113 {
3114   //
3115   // Checks whether the given detector is part of the current geometry
3116   //
3117
3118   if (!GetClusterMatrix(det)) {
3119     return kFALSE;
3120   }
3121   else {
3122     return kTRUE;
3123   }
3124
3125 }
3126
3127 //_____________________________________________________________________________
3128 Bool_t AliTRDgeometry::IsHole(Int_t /*la*/, Int_t st, Int_t se) const
3129 {
3130   //
3131   // Checks for holes in front of PHOS
3132   //
3133
3134   if (((se == 13) || (se == 14) || (se == 15)) &&
3135       (st == 2)) {
3136     return kTRUE;
3137   }
3138
3139   return kFALSE;
3140
3141 }
3142
3143 //_____________________________________________________________________________
3144 Bool_t AliTRDgeometry::IsOnBoundary(Int_t det, Float_t y, Float_t z, Float_t eps) const
3145 {
3146   //
3147   // Checks whether position is at the boundary of the sensitive volume
3148   //
3149
3150   Int_t ly = GetLayer(det);
3151   if ((ly <          0) ||
3152       (ly >= fgkNlayer)) return kTRUE;
3153
3154   Int_t stk = GetStack(det);
3155   if ((stk <          0) ||
3156       (stk >= fgkNstack)) return kTRUE;
3157
3158   AliTRDpadPlane *pp = (AliTRDpadPlane*) fgPadPlaneArray->At(GetDetectorSec(ly, stk));
3159   if(!pp) return kTRUE;
3160
3161   Double_t max  = pp->GetRow0();
3162   Int_t n = pp->GetNrows();
3163   Double_t min = max - 2 * pp->GetLengthOPad()
3164                  - (n-2) * pp->GetLengthIPad()
3165                  - (n-1) * pp->GetRowSpacing();
3166   if(z < min+eps || z > max-eps){
3167     //printf("z : min[%7.2f (%7.2f)] %7.2f max[(%7.2f) %7.2f]\n", min, min+eps, z, max-eps, max);
3168     return kTRUE;
3169   }
3170   min  = pp->GetCol0();
3171   n = pp->GetNcols();
3172   max = min +2 * pp->GetWidthOPad()
3173        + (n-2) * pp->GetWidthIPad()
3174        + (n-1) * pp->GetColSpacing();
3175   if(y < min+eps || y > max-eps){
3176     //printf("y : min[%7.2f (%7.2f)] %7.2f max[(%7.2f) %7.2f]\n", min, min+eps, y, max-eps, max);
3177     return kTRUE;
3178   }
3179
3180   return kFALSE;
3181
3182 }