1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
17 ///////////////////////////////////////////////////////////////////////
19 // AliZDCv2 --- new ZDC geometry //
20 // with the EM ZDC at about 10 m from IP //
21 // Just one set of ZDC is inserted //
22 // (on the same side of the dimuon arm realtive to IP) //
23 // Compensator in ZDC geometry (Nov. 2004) //
25 ///////////////////////////////////////////////////////////////////////
27 // --- Standard libraries
32 #include <TLorentzVector.h>
38 #include <TVirtualMC.h>
40 // --- AliRoot classes
42 #include "AliDetector.h"
46 #include "AliZDCHit.h"
53 //_____________________________________________________________________________
54 AliZDCv2::AliZDCv2() : AliZDC()
57 // Default constructor for Zero Degree Calorimeter
69 //_____________________________________________________________________________
70 AliZDCv2::AliZDCv2(const char *name, const char *title)
74 // Standard constructor for Zero Degree Calorimeter
77 // Check that DIPO, ABSO, DIPO and SHIL is there (otherwise tracking is wrong!!!)
79 AliModule* pipe=gAlice->GetModule("PIPE");
80 AliModule* abso=gAlice->GetModule("ABSO");
81 AliModule* dipo=gAlice->GetModule("DIPO");
82 AliModule* shil=gAlice->GetModule("SHIL");
83 if((!pipe) || (!abso) || (!dipo) || (!shil)) {
84 Error("Constructor","ZDC needs PIPE, ABSO, DIPO and SHIL!!!\n");
98 // Parameters for light tables
99 fNalfan = 90; // Number of Alfa (neutrons)
100 fNalfap = 90; // Number of Alfa (protons)
101 fNben = 18; // Number of beta (neutrons)
102 fNbep = 28; // Number of beta (protons)
104 for(ip=0; ip<4; ip++){
105 for(kp=0; kp<fNalfap; kp++){
106 for(jp=0; jp<fNbep; jp++){
107 fTablep[ip][kp][jp] = 0;
112 for(in=0; in<4; in++){
113 for(kn=0; kn<fNalfan; kn++){
114 for(jn=0; jn<fNben; jn++){
115 fTablen[in][kn][jn] = 0;
120 // Parameters for hadronic calorimeters geometry
140 // Parameters for EM calorimeter geometry
148 //_____________________________________________________________________________
149 void AliZDCv2::CreateGeometry()
152 // Create the geometry for the Zero Degree Calorimeter version 2
153 //* Initialize COMMON block ZDC_CGEOM
160 //_____________________________________________________________________________
161 void AliZDCv2::CreateBeamLine()
164 // Create the beam line elements
167 Float_t zc, zq, zd1, zd2;
168 Float_t conpar[9], tubpar[3], tubspar[5], boxpar[3];
171 Int_t *idtmed = fIdtmed->GetArray();
173 // -- Mother of the ZDCs (Vacuum PCON)
174 // zd1 = 2092.; // (Without compensator in ZDC geometry)
186 gMC->Gsvolu("ZDC ", "PCON", idtmed[11], conpar, 9);
187 gMC->Gspos("ZDC ", 1, "ALIC", 0., 0., 0., 0, "ONLY");
189 // -- FIRST SECTION OF THE BEAM PIPE (from compensator dipole to
190 // the beginning of D1)
193 // From beginning of ZDC volumes to beginning of D1
194 tubpar[2] = (5838.3-zd1)/2.;
195 gMC->Gsvolu("QT01", "TUBE", idtmed[7], tubpar, 3);
196 gMC->Gspos("QT01", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
198 //printf("\n QT01 TUBE pipe from z = %f to z= %f (D1 beg.)\n",-zd1,-2*tubpar[2]-zd1);
200 //-- SECOND SECTION OF THE BEAM PIPE (from the end of D1 to the
203 //-- FROM MAGNETIC BEGINNING OF D1 TO MAGNETIC END OF D1 + 13.5 cm
204 //-- Cylindrical pipe (r = 3.47) + conical flare
206 // -> Beginning of D1
210 tubpar[1] = 3.47+0.2;
211 tubpar[2] = 958.5/2.;
212 gMC->Gsvolu("QT02", "TUBE", idtmed[7], tubpar, 3);
213 gMC->Gspos("QT02", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
215 //printf("\n QT02 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
224 gMC->Gsvolu("QC01", "CONE", idtmed[7], conpar, 5);
225 gMC->Gspos("QC01", 1, "ZDC ", 0., 0., -conpar[0]-zd1, 0, "ONLY");
227 //printf("\n QC01 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
234 gMC->Gsvolu("QT03", "TUBE", idtmed[7], tubpar, 3);
235 gMC->Gspos("QT03", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
237 //printf("\n QT03 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
244 gMC->Gsvolu("QT04", "TUBE", idtmed[7], tubpar, 3);
245 gMC->Gspos("QT04", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
247 //printf("\n QT04 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
249 zd1 += tubpar[2] * 2.;
254 gMC->Gsvolu("QT05", "TUBE", idtmed[7], tubpar, 3);
255 gMC->Gspos("QT05", 1, "ZDC ", 0., 0., -tubpar[0]-zd1, 0, "ONLY");
257 //printf("\n QT05 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
259 zd1 += tubpar[2] * 2.;
264 gMC->Gsvolu("QT06", "TUBE", idtmed[7], tubpar, 3);
265 gMC->Gspos("QT06", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
267 //printf("\n QT06 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
269 zd1 += tubpar[2] * 2.;
276 gMC->Gsvolu("QC02", "CONE", idtmed[7], conpar, 5);
277 gMC->Gspos("QC02", 1, "ZDC ", 0., 0., -conpar[0]-zd1, 0, "ONLY");
279 //printf("\n QC02 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
281 zd1 += conpar[0] * 2.;
286 gMC->Gsvolu("QT07", "TUBE", idtmed[7], tubpar, 3);
287 gMC->Gspos("QT07", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
289 //printf("\n QT07 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
291 zd1 += tubpar[2] * 2.;
298 gMC->Gsvolu("QC03", "CONE", idtmed[7], conpar, 5);
299 gMC->Gspos("QC03", 1, "ZDC ", 0., 0., -conpar[0]-zd1, 0, "ONLY");
301 //printf("\n QC03 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
303 zd1 += conpar[0] * 2.;
307 tubpar[2] = 205.8/2.;
308 gMC->Gsvolu("QT08", "TUBE", idtmed[7], tubpar, 3);
309 gMC->Gspos("QT08", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
311 //printf("\n QT08 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
313 zd1 += tubpar[2] * 2.;
317 // QT09 is 10 cm longer to accomodate TDI
318 tubpar[2] = 515.4/2.;
319 gMC->Gsvolu("QT09", "TUBE", idtmed[7], tubpar, 3);
320 gMC->Gspos("QT09", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
322 //printf("\n QT09 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
324 // --- Insert TDI (inside ZDC volume)
328 gMC->Gsvolu("QTD1", "BOX ", idtmed[7], boxpar, 3);
329 gMC->Gspos("QTD1", 1, "ZDC ", -3., 10.6, -tubpar[2]-zd1-56.3, 0, "ONLY");
330 gMC->Gspos("QTD1", 2, "ZDC ", -3., -10.6, -tubpar[2]-zd1-56.3, 0, "ONLY");
335 gMC->Gsvolu("QTD2", "BOX ", idtmed[6], boxpar, 3);
336 gMC->Gspos("QTD2", 1, "ZDC ", -8.6-boxpar[0], 0., -tubpar[2]-zd1-56.3, 0, "ONLY");
338 tubspar[0] = 10.5; // R = 10.5 cm------------------------------------------
340 tubspar[2] = 400./2.;
341 tubspar[3] = 360.-75.5;
343 gMC->Gsvolu("QTD3", "TUBS", idtmed[6], tubspar, 5);
344 gMC->Gspos("QTD3", 1, "ZDC ", 0., 0., -tubpar[2]-zd1-56.3, 0, "ONLY");
346 //printf("\n TDI volume from z = %f to z= %f\n",-tubpar[2]-zd1-56.3,-tubpar[2]-zd1-56.3-400.);
348 zd1 += tubpar[2] * 2.;
352 // QT10 is 10 cm shorter
354 gMC->Gsvolu("QT10", "TUBE", idtmed[7], tubpar, 3);
355 gMC->Gspos("QT10", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
357 //printf("\n QT10 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
359 zd1 += tubpar[2] * 2.;
363 tubpar[2] = 778.5/2.;
364 gMC->Gsvolu("QT11", "TUBE", idtmed[7], tubpar, 3);
365 gMC->Gspos("QT11", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
367 //printf("\n QT11 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
369 zd1 += tubpar[2] * 2.;
371 conpar[0] = 14.18/2.;
376 gMC->Gsvolu("QC04", "CONE", idtmed[7], conpar, 5);
377 gMC->Gspos("QC04", 1, "ZDC ", 0., 0., -conpar[0]-zd1, 0, "ONLY");
379 //printf("\n QC04 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
381 zd1 += conpar[0] * 2.;
386 gMC->Gsvolu("QT12", "TUBE", idtmed[7], tubpar, 3);
387 gMC->Gspos("QT12", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
389 //printf("\n QT12 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
391 zd1 += tubpar[2] * 2.;
393 conpar[0] = 36.86/2.;
398 gMC->Gsvolu("QC05", "CONE", idtmed[7], conpar, 5);
399 gMC->Gspos("QC05", 1, "ZDC ", 0., 0., -conpar[0]-zd1, 0, "ONLY");
401 //printf("\n QC05 CONE pipe from z = %f to z= %f\n",-zd1,-2*conpar[0]-zd1);
403 zd1 += conpar[0] * 2.;
407 tubpar[2] = 927.3/2.;
408 gMC->Gsvolu("QT13", "TUBE", idtmed[7], tubpar, 3);
409 gMC->Gspos("QT13", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
411 //printf("\n QT13 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
413 zd1 += tubpar[2] * 2.;
418 gMC->Gsvolu("QT14", "TUBE", idtmed[8], tubpar, 3);
419 gMC->Gspos("QT14", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
421 //printf("\n QT14 TUBE pipe from z = %f to z= %f\n",-zd1,-2*tubpar[2]-zd1);
423 zd1 += tubpar[2] * 2.;
428 gMC->Gsvolu("QT15", "TUBE", idtmed[11], tubpar, 3);
429 //-- Position QT15 inside QT14
430 gMC->Gspos("QT15", 1, "QT14", -7.7, 0., 0., 0, "ONLY");
432 gMC->Gsvolu("QT16", "TUBE", idtmed[11], tubpar, 3);
433 //-- Position QT16 inside QT14
434 gMC->Gspos("QT16", 1, "QT14", 7.7, 0., 0., 0, "ONLY");
437 //-- BEAM PIPE BETWEEN END OF CONICAL PIPE AND BEGINNING OF D2
441 tubpar[2] = 680.8/2.;
442 gMC->Gsvolu("QT17", "TUBE", idtmed[7], tubpar, 3);
446 tubpar[2] = 680.8/2.;
447 gMC->Gsvolu("QT18", "TUBE", idtmed[7], tubpar, 3);
450 Float_t angle = 0.143*kDegrad; // Rotation angle
452 AliMatrix(im1, 90.+0.143, 0., 90., 90., 0.143, 0.); // x<0
453 gMC->Gspos("QT17", 1, "ZDC ", TMath::Sin(angle) * 680.8/ 2. - 9.4,
454 0., -tubpar[2]-zd1, im1, "ONLY");
456 AliMatrix(im2, 90.-0.143, 0., 90., 90., 0.143, 180.); // x>0 (ZP)
457 gMC->Gspos("QT18", 1, "ZDC ", 9.7 - TMath::Sin(angle) * 680.8 / 2.,
458 0., -tubpar[2]-zd1, im2, "ONLY");
460 // -- END OF BEAM PIPE VOLUME DEFINITION.
461 // ----------------------------------------------------------------
463 // ----------------------------------------------------------------
464 // -- MAGNET DEFINITION -> LHC OPTICS 6.5
465 // ----------------------------------------------------------------
466 // -- COMPENSATOR DIPOLE (MBXW)
469 // -- GAP (VACUUM WITH MAGNETIC FIELD)
473 gMC->Gsvolu("MBXW", "TUBE", idtmed[11], tubpar, 3);
479 gMC->Gsvolu("YMBX", "TUBE", idtmed[7], tubpar, 3);
481 gMC->Gspos("MBXW", 1, "ZDC ", 0., 0., -tubpar[2]-zc, 0, "ONLY");
482 gMC->Gspos("YMBX", 1, "ZDC ", 0., 0., -tubpar[2]-zc, 0, "ONLY");
488 // -- DEFINE MQXL AND MQX QUADRUPOLE ELEMENT
490 // -- GAP (VACUUM WITH MAGNETIC FIELD)
494 gMC->Gsvolu("MQXL", "TUBE", idtmed[11], tubpar, 3);
501 gMC->Gsvolu("YMQL", "TUBE", idtmed[7], tubpar, 3);
503 gMC->Gspos("MQXL", 1, "ZDC ", 0., 0., -tubpar[2]-zq, 0, "ONLY");
504 gMC->Gspos("YMQL", 1, "ZDC ", 0., 0., -tubpar[2]-zq, 0, "ONLY");
506 gMC->Gspos("MQXL", 2, "ZDC ", 0., 0., -tubpar[2]-zq-2430., 0, "ONLY");
507 gMC->Gspos("YMQL", 2, "ZDC ", 0., 0., -tubpar[2]-zq-2430., 0, "ONLY");
510 // -- GAP (VACUUM WITH MAGNETIC FIELD)
514 gMC->Gsvolu("MQX ", "TUBE", idtmed[11], tubpar, 3);
520 gMC->Gsvolu("YMQ ", "TUBE", idtmed[7], tubpar, 3);
522 gMC->Gspos("MQX ", 1, "ZDC ", 0., 0., -tubpar[2]-zq-908.5, 0, "ONLY");
523 gMC->Gspos("YMQ ", 1, "ZDC ", 0., 0., -tubpar[2]-zq-908.5, 0, "ONLY");
525 gMC->Gspos("MQX ", 2, "ZDC ", 0., 0., -tubpar[2]-zq-1558.5, 0, "ONLY");
526 gMC->Gspos("YMQ ", 2, "ZDC ", 0., 0., -tubpar[2]-zq-1558.5, 0, "ONLY");
528 // -- SEPARATOR DIPOLE D1
531 // -- GAP (VACUUM WITH MAGNETIC FIELD)
535 gMC->Gsvolu("MD1 ", "TUBE", idtmed[11], tubpar, 3);
537 // -- Insert horizontal Cu plates inside D1
538 // -- (to simulate the vacuum chamber)
539 boxpar[0] = TMath::Sqrt(tubpar[1]*tubpar[1]-(2.98+0.2)*(2.98+0.2)) - 0.05;
542 gMC->Gsvolu("MD1V", "BOX ", idtmed[6], boxpar, 3);
543 gMC->Gspos("MD1V", 1, "MD1 ", 0., 2.98+boxpar[1], 0., 0, "ONLY");
544 gMC->Gspos("MD1V", 2, "MD1 ", 0., -2.98-boxpar[1], 0., 0, "ONLY");
550 gMC->Gsvolu("YD1 ", "TUBE", idtmed[7], tubpar, 3);
552 gMC->Gspos("YD1 ", 1, "ZDC ", 0., 0., -tubpar[2]-zd1, 0, "ONLY");
553 gMC->Gspos("MD1 ", 1, "YD1 ", 0., 0., 0., 0, "ONLY");
556 // --- LHC optics v6.4
559 // -- GAP (VACUUM WITH MAGNETIC FIELD)
563 gMC->Gsvolu("MD2 ", "TUBE", idtmed[11], tubpar, 3);
569 gMC->Gsvolu("YD2 ", "TUBE", idtmed[7], tubpar, 3);
571 gMC->Gspos("YD2 ", 1, "ZDC ", 0., 0., -tubpar[2]-zd2, 0, "ONLY");
573 gMC->Gspos("MD2 ", 1, "YD2 ", -9.4, 0., 0., 0, "ONLY");
574 gMC->Gspos("MD2 ", 2, "YD2 ", 9.4, 0., 0., 0, "ONLY");
576 // -- END OF MAGNET DEFINITION
579 //_____________________________________________________________________________
580 void AliZDCv2::CreateZDC()
583 // Create the various ZDCs (ZN + ZP)
586 Float_t dimPb[6], dimVoid[6];
588 Int_t *idtmed = fIdtmed->GetArray();
590 // Parameters for hadronic calorimeters geometry
591 // NB -> parameters used ONLY in CreateZDC()
592 Float_t fGrvZN[3] = {0.03, 0.03, 50.}; // Grooves for neutron detector
593 Float_t fGrvZP[3] = {0.04, 0.04, 75.}; // Grooves for proton detector
594 Int_t fDivZN[3] = {11, 11, 0}; // Division for neutron detector
595 Int_t fDivZP[3] = {7, 15, 0}; // Division for proton detector
596 Int_t fTowZN[2] = {2, 2}; // Tower for neutron detector
597 Int_t fTowZP[2] = {4, 1}; // Tower for proton detector
599 // Parameters for EM calorimeter geometry
600 // NB -> parameters used ONLY in CreateZDC()
601 Float_t fDimZEMPb = 0.15*(TMath::Sqrt(2.)); // z-dimension of the Pb slice
602 Float_t fDimZEMAir = 0.001; // scotch
603 Float_t fFibRadZEM = 0.0315; // External fiber radius (including cladding)
604 Int_t fDivZEM[3] = {92, 0, 20}; // Divisions for EM detector
605 Float_t fDimZEM0 = 2*fDivZEM[2]*(fDimZEMPb+fDimZEMAir+fFibRadZEM*(TMath::Sqrt(2.)));
606 fZEMLength = fDimZEM0;
607 Float_t fDimZEM[6] = {fDimZEM0, 3.5, 3.5, 45., 0., 0.}; // Dimensions of EM detector
608 Float_t fFibZEM2 = fDimZEM[2]/TMath::Sin(fDimZEM[3]*kDegrad)-fFibRadZEM;
609 Float_t fFibZEM[3] = {0., 0.0275, fFibZEM2}; // Fibers for EM calorimeter
612 //-- Create calorimeters geometry
614 // -------------------------------------------------------------------------------
615 //--> Neutron calorimeter (ZN)
617 gMC->Gsvolu("ZNEU", "BOX ", idtmed[1], fDimZN, 3); // Passive material
618 gMC->Gsvolu("ZNF1", "TUBE", idtmed[3], fFibZN, 3); // Active material
619 gMC->Gsvolu("ZNF2", "TUBE", idtmed[4], fFibZN, 3);
620 gMC->Gsvolu("ZNF3", "TUBE", idtmed[4], fFibZN, 3);
621 gMC->Gsvolu("ZNF4", "TUBE", idtmed[3], fFibZN, 3);
622 gMC->Gsvolu("ZNG1", "BOX ", idtmed[12], fGrvZN, 3); // Empty grooves
623 gMC->Gsvolu("ZNG2", "BOX ", idtmed[12], fGrvZN, 3);
624 gMC->Gsvolu("ZNG3", "BOX ", idtmed[12], fGrvZN, 3);
625 gMC->Gsvolu("ZNG4", "BOX ", idtmed[12], fGrvZN, 3);
627 // Divide ZNEU in towers (for hits purposes)
629 gMC->Gsdvn("ZNTX", "ZNEU", fTowZN[0], 1); // x-tower
630 gMC->Gsdvn("ZN1 ", "ZNTX", fTowZN[1], 2); // y-tower
632 //-- Divide ZN1 in minitowers
633 // fDivZN[0]= NUMBER OF FIBERS PER TOWER ALONG X-AXIS,
634 // fDivZN[1]= NUMBER OF FIBERS PER TOWER ALONG Y-AXIS
635 // (4 fibres per minitower)
637 gMC->Gsdvn("ZNSL", "ZN1 ", fDivZN[1], 2); // Slices
638 gMC->Gsdvn("ZNST", "ZNSL", fDivZN[0], 1); // Sticks
640 // --- Position the empty grooves in the sticks (4 grooves per stick)
641 Float_t dx = fDimZN[0] / fDivZN[0] / 4.;
642 Float_t dy = fDimZN[1] / fDivZN[1] / 4.;
644 gMC->Gspos("ZNG1", 1, "ZNST", 0.-dx, 0.+dy, 0., 0, "ONLY");
645 gMC->Gspos("ZNG2", 1, "ZNST", 0.+dx, 0.+dy, 0., 0, "ONLY");
646 gMC->Gspos("ZNG3", 1, "ZNST", 0.-dx, 0.-dy, 0., 0, "ONLY");
647 gMC->Gspos("ZNG4", 1, "ZNST", 0.+dx, 0.-dy, 0., 0, "ONLY");
649 // --- Position the fibers in the grooves
650 gMC->Gspos("ZNF1", 1, "ZNG1", 0., 0., 0., 0, "ONLY");
651 gMC->Gspos("ZNF2", 1, "ZNG2", 0., 0., 0., 0, "ONLY");
652 gMC->Gspos("ZNF3", 1, "ZNG3", 0., 0., 0., 0, "ONLY");
653 gMC->Gspos("ZNF4", 1, "ZNG4", 0., 0., 0., 0, "ONLY");
655 // --- Position the neutron calorimeter in ZDC
656 // -- Rotation of ZDCs
658 gMC->Matrix(irotzdc, 90., 180., 90., 90., 180., 0.);
660 gMC->Gspos("ZNEU", 1, "ZDC ", fPosZN[0], fPosZN[1], fPosZN[2]-fDimZN[2], irotzdc, "ONLY");
662 //printf("\n ZN -> %f < z < %f cm\n",fPosZN[2],fPosZN[2]-2*fDimZN[2]);
664 // -------------------------------------------------------------------------------
665 //--> Proton calorimeter (ZP)
667 gMC->Gsvolu("ZPRO", "BOX ", idtmed[2], fDimZP, 3); // Passive material
668 gMC->Gsvolu("ZPF1", "TUBE", idtmed[3], fFibZP, 3); // Active material
669 gMC->Gsvolu("ZPF2", "TUBE", idtmed[4], fFibZP, 3);
670 gMC->Gsvolu("ZPF3", "TUBE", idtmed[4], fFibZP, 3);
671 gMC->Gsvolu("ZPF4", "TUBE", idtmed[3], fFibZP, 3);
672 gMC->Gsvolu("ZPG1", "BOX ", idtmed[12], fGrvZP, 3); // Empty grooves
673 gMC->Gsvolu("ZPG2", "BOX ", idtmed[12], fGrvZP, 3);
674 gMC->Gsvolu("ZPG3", "BOX ", idtmed[12], fGrvZP, 3);
675 gMC->Gsvolu("ZPG4", "BOX ", idtmed[12], fGrvZP, 3);
677 //-- Divide ZPRO in towers(for hits purposes)
679 gMC->Gsdvn("ZPTX", "ZPRO", fTowZP[0], 1); // x-tower
680 gMC->Gsdvn("ZP1 ", "ZPTX", fTowZP[1], 2); // y-tower
683 //-- Divide ZP1 in minitowers
684 // fDivZP[0]= NUMBER OF FIBERS ALONG X-AXIS PER MINITOWER,
685 // fDivZP[1]= NUMBER OF FIBERS ALONG Y-AXIS PER MINITOWER
686 // (4 fiber per minitower)
688 gMC->Gsdvn("ZPSL", "ZP1 ", fDivZP[1], 2); // Slices
689 gMC->Gsdvn("ZPST", "ZPSL", fDivZP[0], 1); // Sticks
691 // --- Position the empty grooves in the sticks (4 grooves per stick)
692 dx = fDimZP[0] / fTowZP[0] / fDivZP[0] / 2.;
693 dy = fDimZP[1] / fTowZP[1] / fDivZP[1] / 2.;
695 gMC->Gspos("ZPG1", 1, "ZPST", 0.-dx, 0.+dy, 0., 0, "ONLY");
696 gMC->Gspos("ZPG2", 1, "ZPST", 0.+dx, 0.+dy, 0., 0, "ONLY");
697 gMC->Gspos("ZPG3", 1, "ZPST", 0.-dx, 0.-dy, 0., 0, "ONLY");
698 gMC->Gspos("ZPG4", 1, "ZPST", 0.+dx, 0.-dy, 0., 0, "ONLY");
700 // --- Position the fibers in the grooves
701 gMC->Gspos("ZPF1", 1, "ZPG1", 0., 0., 0., 0, "ONLY");
702 gMC->Gspos("ZPF2", 1, "ZPG2", 0., 0., 0., 0, "ONLY");
703 gMC->Gspos("ZPF3", 1, "ZPG3", 0., 0., 0., 0, "ONLY");
704 gMC->Gspos("ZPF4", 1, "ZPG4", 0., 0., 0., 0, "ONLY");
707 // --- Position the proton calorimeter in ZDC
708 gMC->Gspos("ZPRO", 1, "ZDC ", fPosZP[0], fPosZP[1], fPosZP[2]-fDimZP[2], irotzdc, "ONLY");
710 //printf("\n ZP -> %f < z < %f cm\n",fPosZP[2],fPosZP[2]-2*fDimZP[2]);
713 // -------------------------------------------------------------------------------
714 // -> EM calorimeter (ZEM)
716 gMC->Gsvolu("ZEM ", "PARA", idtmed[10], fDimZEM, 6);
719 gMC->Matrix(irot1,0.,0.,90.,90.,-90.,0.); // Rotation matrix 1
720 gMC->Matrix(irot2,180.,0.,90.,fDimZEM[3]+90.,90.,fDimZEM[3]);// Rotation matrix 2
721 //printf("irot1 = %d, irot2 = %d \n", irot1, irot2);
723 gMC->Gsvolu("ZEMF", "TUBE", idtmed[3], fFibZEM, 3); // Active material
725 gMC->Gsdvn("ZETR", "ZEM ", fDivZEM[2], 1); // Tranches
727 dimPb[0] = fDimZEMPb; // Lead slices
728 dimPb[1] = fDimZEM[2];
729 dimPb[2] = fDimZEM[1];
730 //dimPb[3] = fDimZEM[3]; //controllare
731 dimPb[3] = 90.-fDimZEM[3]; //originale
734 gMC->Gsvolu("ZEL0", "PARA", idtmed[5], dimPb, 6);
735 gMC->Gsvolu("ZEL1", "PARA", idtmed[5], dimPb, 6);
736 gMC->Gsvolu("ZEL2", "PARA", idtmed[5], dimPb, 6);
738 // --- Position the lead slices in the tranche
739 Float_t zTran = fDimZEM[0]/fDivZEM[2];
740 Float_t zTrPb = -zTran+fDimZEMPb;
741 gMC->Gspos("ZEL0", 1, "ZETR", zTrPb, 0., 0., 0, "ONLY");
742 gMC->Gspos("ZEL1", 1, "ZETR", fDimZEMPb, 0., 0., 0, "ONLY");
744 // --- Vacuum zone (to be filled with fibres)
745 dimVoid[0] = (zTran-2*fDimZEMPb)/2.;
746 dimVoid[1] = fDimZEM[2];
747 dimVoid[2] = fDimZEM[1];
748 dimVoid[3] = 90.-fDimZEM[3];
751 gMC->Gsvolu("ZEV0", "PARA", idtmed[10], dimVoid,6);
752 gMC->Gsvolu("ZEV1", "PARA", idtmed[10], dimVoid,6);
754 // --- Divide the vacuum slice into sticks along x axis
755 gMC->Gsdvn("ZES0", "ZEV0", fDivZEM[0], 3);
756 gMC->Gsdvn("ZES1", "ZEV1", fDivZEM[0], 3);
758 // --- Positioning the fibers into the sticks
759 gMC->Gspos("ZEMF", 1,"ZES0", 0., 0., 0., irot2, "ONLY");
760 gMC->Gspos("ZEMF", 1,"ZES1", 0., 0., 0., irot2, "ONLY");
762 // --- Positioning the vacuum slice into the tranche
763 Float_t displFib = fDimZEM[1]/fDivZEM[0];
764 gMC->Gspos("ZEV0", 1,"ZETR", -dimVoid[0], 0., 0., 0, "ONLY");
765 gMC->Gspos("ZEV1", 1,"ZETR", -dimVoid[0]+zTran, 0., displFib, 0, "ONLY");
767 // --- Positioning the ZEM into the ZDC - rotation for 90 degrees
768 // NB -> In AliZDCv2 ZEM is positioned in ALIC (instead of in ZDC) volume
769 // beacause it's impossible to make a ZDC pcon volume to contain
770 // both hadronics and EM calorimeters.
771 gMC->Gspos("ZEM ", 1,"ALIC", -fPosZEM[0], fPosZEM[1], fPosZEM[2]+fDimZEM[0], irot1, "ONLY");
773 // Second EM ZDC (same side w.r.t. IP, just on the other side w.r.t. beam pipe)
774 gMC->Gspos("ZEM ", 2,"ALIC", fPosZEM[0], fPosZEM[1], fPosZEM[2]+fDimZEM[0], irot1, "ONLY");
776 // --- Adding last slice at the end of the EM calorimeter
777 Float_t zLastSlice = fPosZEM[2]+fDimZEMPb+2*fDimZEM[0];
778 gMC->Gspos("ZEL2", 1,"ALIC", fPosZEM[0], fPosZEM[1], zLastSlice, irot1, "ONLY");
780 //printf("\n ZEM lenght = %f cm\n",2*fZEMLength);
781 //printf("\n ZEM -> %f < z < %f cm\n",fPosZEM[2],fPosZEM[2]+2*fZEMLength+zLastSlice+fDimZEMPb);
785 //_____________________________________________________________________________
786 void AliZDCv2::DrawModule() const
789 // Draw a shaded view of the Zero Degree Calorimeter version 1
792 // Set everything unseen
793 gMC->Gsatt("*", "seen", -1);
795 // Set ALIC mother transparent
796 gMC->Gsatt("ALIC","SEEN",0);
798 // Set the volumes visible
799 gMC->Gsatt("ZDC ","SEEN",0);
800 gMC->Gsatt("QT01","SEEN",1);
801 gMC->Gsatt("QT02","SEEN",1);
802 gMC->Gsatt("QT03","SEEN",1);
803 gMC->Gsatt("QT04","SEEN",1);
804 gMC->Gsatt("QT05","SEEN",1);
805 gMC->Gsatt("QT06","SEEN",1);
806 gMC->Gsatt("QT07","SEEN",1);
807 gMC->Gsatt("QT08","SEEN",1);
808 gMC->Gsatt("QT09","SEEN",1);
809 gMC->Gsatt("QT10","SEEN",1);
810 gMC->Gsatt("QT11","SEEN",1);
811 gMC->Gsatt("QT12","SEEN",1);
812 gMC->Gsatt("QT13","SEEN",1);
813 gMC->Gsatt("QT14","SEEN",1);
814 gMC->Gsatt("QT15","SEEN",1);
815 gMC->Gsatt("QT16","SEEN",1);
816 gMC->Gsatt("QT17","SEEN",1);
817 gMC->Gsatt("QT18","SEEN",1);
818 gMC->Gsatt("QC01","SEEN",1);
819 gMC->Gsatt("QC02","SEEN",1);
820 gMC->Gsatt("QC03","SEEN",1);
821 gMC->Gsatt("QC04","SEEN",1);
822 gMC->Gsatt("QC05","SEEN",1);
823 gMC->Gsatt("QTD1","SEEN",1);
824 gMC->Gsatt("QTD2","SEEN",1);
825 gMC->Gsatt("QTD3","SEEN",1);
826 gMC->Gsatt("MQXL","SEEN",1);
827 gMC->Gsatt("YMQL","SEEN",1);
828 gMC->Gsatt("MQX ","SEEN",1);
829 gMC->Gsatt("YMQ ","SEEN",1);
830 gMC->Gsatt("ZQYX","SEEN",1);
831 gMC->Gsatt("MD1 ","SEEN",1);
832 gMC->Gsatt("MD1V","SEEN",1);
833 gMC->Gsatt("YD1 ","SEEN",1);
834 gMC->Gsatt("MD2 ","SEEN",1);
835 gMC->Gsatt("YD2 ","SEEN",1);
836 gMC->Gsatt("ZNEU","SEEN",0);
837 gMC->Gsatt("ZNF1","SEEN",0);
838 gMC->Gsatt("ZNF2","SEEN",0);
839 gMC->Gsatt("ZNF3","SEEN",0);
840 gMC->Gsatt("ZNF4","SEEN",0);
841 gMC->Gsatt("ZNG1","SEEN",0);
842 gMC->Gsatt("ZNG2","SEEN",0);
843 gMC->Gsatt("ZNG3","SEEN",0);
844 gMC->Gsatt("ZNG4","SEEN",0);
845 gMC->Gsatt("ZNTX","SEEN",0);
846 gMC->Gsatt("ZN1 ","COLO",4);
847 gMC->Gsatt("ZN1 ","SEEN",1);
848 gMC->Gsatt("ZNSL","SEEN",0);
849 gMC->Gsatt("ZNST","SEEN",0);
850 gMC->Gsatt("ZPRO","SEEN",0);
851 gMC->Gsatt("ZPF1","SEEN",0);
852 gMC->Gsatt("ZPF2","SEEN",0);
853 gMC->Gsatt("ZPF3","SEEN",0);
854 gMC->Gsatt("ZPF4","SEEN",0);
855 gMC->Gsatt("ZPG1","SEEN",0);
856 gMC->Gsatt("ZPG2","SEEN",0);
857 gMC->Gsatt("ZPG3","SEEN",0);
858 gMC->Gsatt("ZPG4","SEEN",0);
859 gMC->Gsatt("ZPTX","SEEN",0);
860 gMC->Gsatt("ZP1 ","COLO",6);
861 gMC->Gsatt("ZP1 ","SEEN",1);
862 gMC->Gsatt("ZPSL","SEEN",0);
863 gMC->Gsatt("ZPST","SEEN",0);
864 gMC->Gsatt("ZEM ","COLO",7);
865 gMC->Gsatt("ZEM ","SEEN",1);
866 gMC->Gsatt("ZEMF","SEEN",0);
867 gMC->Gsatt("ZETR","SEEN",0);
868 gMC->Gsatt("ZEL0","SEEN",0);
869 gMC->Gsatt("ZEL1","SEEN",0);
870 gMC->Gsatt("ZEL2","SEEN",0);
871 gMC->Gsatt("ZEV0","SEEN",0);
872 gMC->Gsatt("ZEV1","SEEN",0);
873 gMC->Gsatt("ZES0","SEEN",0);
874 gMC->Gsatt("ZES1","SEEN",0);
877 gMC->Gdopt("hide", "on");
878 gMC->Gdopt("shad", "on");
879 gMC->Gsatt("*", "fill", 7);
880 gMC->SetClipBox(".");
881 gMC->SetClipBox("*", 0, 100, -100, 100, 12000, 16000);
883 gMC->Gdraw("alic", 40, 30, 0, 488, 220, .07, .07);
884 gMC->Gdhead(1111, "Zero Degree Calorimeter Version 1");
885 gMC->Gdman(18, 4, "MAN");
888 //_____________________________________________________________________________
889 void AliZDCv2::CreateMaterials()
892 // Create Materials for the Zero Degree Calorimeter
895 Int_t *idtmed = fIdtmed->GetArray();
897 Float_t dens, ubuf[1], wmat[2], a[2], z[2];
900 // --- Store in UBUF r0 for nuclear radius calculation R=r0*A**1/3
902 // --- Tantalum -> ZN passive material
904 AliMaterial(1, "TANT", 180.95, 73., 16.65, .4, 11.9, ubuf, 1);
908 // AliMaterial(1, "TUNG", 183.85, 74., 19.3, .35, 10.3, ubuf, 1);
910 // --- Brass (CuZn) -> ZP passive material
918 AliMixture(2, "BRASS ", a, z, dens, 2, wmat);
928 AliMixture(3, "SIO2 ", a, z, dens, -2, wmat);
932 AliMaterial(5, "LEAD", 207.19, 82., 11.35, .56, 18.5, ubuf, 1);
936 AliMaterial(6, "COPP", 63.54, 29., 8.96, 1.4, 0., ubuf, 1);
938 // --- Iron (energy loss taken into account)
940 AliMaterial(7, "IRON0", 55.85, 26., 7.87, 1.76, 0., ubuf, 1);
942 // --- Iron (no energy loss)
944 AliMaterial(8, "IRON1", 55.85, 26., 7.87, 1.76, 0., ubuf, 1);
946 // ---------------------------------------------------------
947 Float_t aResGas[3]={1.008,12.0107,15.9994};
948 Float_t zResGas[3]={1.,6.,8.};
949 Float_t wResGas[3]={0.28,0.28,0.44};
950 Float_t dResGas = 3.2E-14;
952 // --- Vacuum (no magnetic field)
953 AliMixture(10, "VOID", aResGas, zResGas, dResGas, 3, wResGas);
954 //AliMaterial(10, "VOID", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0);
956 // --- Vacuum (with magnetic field)
957 AliMixture(11, "VOIM", aResGas, zResGas, dResGas, 3, wResGas);
958 //AliMaterial(11, "VOIM", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0);
960 // --- Air (no magnetic field)
961 Float_t aAir[4]={12.0107,14.0067,15.9994,39.948};
962 Float_t zAir[4]={6.,7.,8.,18.};
963 Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827};
964 Float_t dAir = 1.20479E-3;
966 AliMixture(12, "Air $", aAir, zAir, dAir, 4, wAir);
967 //AliMaterial(12, "Air $", 14.61, 7.3, .001205, 30420., 67500., ubuf, 0);
969 // --- Definition of tracking media:
971 // --- Tantalum = 1 ;
973 // --- Fibers (SiO2) = 3 ;
974 // --- Fibers (SiO2) = 4 ;
977 // --- Iron (with energy loss) = 7 ;
978 // --- Iron (without energy loss) = 8 ;
979 // --- Vacuum (no field) = 10
980 // --- Vacuum (with field) = 11
981 // --- Air (no field) = 12
983 // ****************************************************
984 // Tracking media parameters
986 Float_t epsil = 0.01; // Tracking precision,
987 Float_t stmin = 0.01; // Min. value 4 max. step (cm)
988 Float_t stemax = 1.; // Max. step permitted (cm)
989 Float_t tmaxfd = 0.; // Maximum angle due to field (degrees)
990 Float_t deemax = -1.; // Maximum fractional energy loss
991 Float_t nofieldm = 0.; // Max. field value (no field)
992 Float_t fieldm = 45.; // Max. field value (with field)
993 Int_t isvol = 0; // ISVOL =0 -> not sensitive volume
994 Int_t isvolActive = 1; // ISVOL =1 -> sensitive volume
995 Int_t inofld = 0; // IFIELD=0 -> no magnetic field
996 Int_t ifield =2; // IFIELD=2 -> magnetic field defined in AliMagFC.h
997 // *****************************************************
999 AliMedium(1, "ZTANT", 1, isvolActive, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1000 AliMedium(2, "ZBRASS",2, isvolActive, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1001 AliMedium(3, "ZSIO2", 3, isvolActive, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1002 AliMedium(4, "ZQUAR", 3, isvolActive, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1003 AliMedium(5, "ZLEAD", 5, isvolActive, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1004 AliMedium(6, "ZCOPP", 6, isvol, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1005 AliMedium(7, "ZIRON", 7, isvol, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1006 AliMedium(8, "ZIRONN",8, isvol, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1007 AliMedium(10,"ZVOID",10, isvol, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1008 AliMedium(12,"ZAIR", 12, isvol, inofld, nofieldm, tmaxfd, stemax, deemax, epsil, stmin);
1010 AliMedium(11,"ZVOIM",11, isvol, ifield, fieldm, tmaxfd, stemax, deemax, epsil, stmin);
1012 // Thresholds for showering in the ZDCs
1014 gMC->Gstpar(idtmed[i], "CUTGAM", .001);
1015 gMC->Gstpar(idtmed[i], "CUTELE", .001);
1016 gMC->Gstpar(idtmed[i], "CUTNEU", .01);
1017 gMC->Gstpar(idtmed[i], "CUTHAD", .01);
1019 gMC->Gstpar(idtmed[i], "CUTGAM", .001);
1020 gMC->Gstpar(idtmed[i], "CUTELE", .001);
1021 gMC->Gstpar(idtmed[i], "CUTNEU", .01);
1022 gMC->Gstpar(idtmed[i], "CUTHAD", .01);
1024 gMC->Gstpar(idtmed[i], "CUTGAM", .001);
1025 gMC->Gstpar(idtmed[i], "CUTELE", .001);
1026 gMC->Gstpar(idtmed[i], "CUTNEU", .01);
1027 gMC->Gstpar(idtmed[i], "CUTHAD", .01);
1029 // Avoid too detailed showering in TDI
1031 gMC->Gstpar(idtmed[i], "CUTGAM", .1);
1032 gMC->Gstpar(idtmed[i], "CUTELE", .1);
1033 gMC->Gstpar(idtmed[i], "CUTNEU", 1.);
1034 gMC->Gstpar(idtmed[i], "CUTHAD", 1.);
1036 // Avoid too detailed showering along the beam line
1037 i = 7; //iron with energy loss (ZIRON)
1038 gMC->Gstpar(idtmed[i], "CUTGAM", .1);
1039 gMC->Gstpar(idtmed[i], "CUTELE", .1);
1040 gMC->Gstpar(idtmed[i], "CUTNEU", 1.);
1041 gMC->Gstpar(idtmed[i], "CUTHAD", 1.);
1043 // Avoid too detailed showering along the beam line
1044 i = 8; //iron with energy loss (ZIRONN)
1045 gMC->Gstpar(idtmed[i], "CUTGAM", .1);
1046 gMC->Gstpar(idtmed[i], "CUTELE", .1);
1047 gMC->Gstpar(idtmed[i], "CUTNEU", 1.);
1048 gMC->Gstpar(idtmed[i], "CUTHAD", 1.);
1050 // Avoid interaction in fibers (only energy loss allowed)
1051 i = 3; //fibers (ZSI02)
1052 gMC->Gstpar(idtmed[i], "DCAY", 0.);
1053 gMC->Gstpar(idtmed[i], "MULS", 0.);
1054 gMC->Gstpar(idtmed[i], "PFIS", 0.);
1055 gMC->Gstpar(idtmed[i], "MUNU", 0.);
1056 gMC->Gstpar(idtmed[i], "LOSS", 1.);
1057 gMC->Gstpar(idtmed[i], "PHOT", 0.);
1058 gMC->Gstpar(idtmed[i], "COMP", 0.);
1059 gMC->Gstpar(idtmed[i], "PAIR", 0.);
1060 gMC->Gstpar(idtmed[i], "BREM", 0.);
1061 gMC->Gstpar(idtmed[i], "DRAY", 0.);
1062 gMC->Gstpar(idtmed[i], "ANNI", 0.);
1063 gMC->Gstpar(idtmed[i], "HADR", 0.);
1064 i = 4; //fibers (ZQUAR)
1065 gMC->Gstpar(idtmed[i], "DCAY", 0.);
1066 gMC->Gstpar(idtmed[i], "MULS", 0.);
1067 gMC->Gstpar(idtmed[i], "PFIS", 0.);
1068 gMC->Gstpar(idtmed[i], "MUNU", 0.);
1069 gMC->Gstpar(idtmed[i], "LOSS", 1.);
1070 gMC->Gstpar(idtmed[i], "PHOT", 0.);
1071 gMC->Gstpar(idtmed[i], "COMP", 0.);
1072 gMC->Gstpar(idtmed[i], "PAIR", 0.);
1073 gMC->Gstpar(idtmed[i], "BREM", 0.);
1074 gMC->Gstpar(idtmed[i], "DRAY", 0.);
1075 gMC->Gstpar(idtmed[i], "ANNI", 0.);
1076 gMC->Gstpar(idtmed[i], "HADR", 0.);
1078 // Avoid interaction in void
1079 i = 11; //void with field
1080 gMC->Gstpar(idtmed[i], "DCAY", 0.);
1081 gMC->Gstpar(idtmed[i], "MULS", 0.);
1082 gMC->Gstpar(idtmed[i], "PFIS", 0.);
1083 gMC->Gstpar(idtmed[i], "MUNU", 0.);
1084 gMC->Gstpar(idtmed[i], "LOSS", 0.);
1085 gMC->Gstpar(idtmed[i], "PHOT", 0.);
1086 gMC->Gstpar(idtmed[i], "COMP", 0.);
1087 gMC->Gstpar(idtmed[i], "PAIR", 0.);
1088 gMC->Gstpar(idtmed[i], "BREM", 0.);
1089 gMC->Gstpar(idtmed[i], "DRAY", 0.);
1090 gMC->Gstpar(idtmed[i], "ANNI", 0.);
1091 gMC->Gstpar(idtmed[i], "HADR", 0.);
1094 fMedSensZN = idtmed[1]; // Sensitive volume: ZN passive material
1095 fMedSensZP = idtmed[2]; // Sensitive volume: ZP passive material
1096 fMedSensF1 = idtmed[3]; // Sensitive volume: fibres type 1
1097 fMedSensF2 = idtmed[4]; // Sensitive volume: fibres type 2
1098 fMedSensZEM = idtmed[5]; // Sensitive volume: ZEM passive material
1099 fMedSensTDI = idtmed[6]; // Sensitive volume: TDI Cu shield
1100 fMedSensPI = idtmed[7]; // Sensitive volume: beam pipes
1101 fMedSensGR = idtmed[12]; // Sensitive volume: air into the grooves
1104 //_____________________________________________________________________________
1105 void AliZDCv2::Init()
1110 //_____________________________________________________________________________
1111 void AliZDCv2::InitTables()
1114 // Read light tables for Cerenkov light production parameterization
1119 char *lightfName1,*lightfName2,*lightfName3,*lightfName4,
1120 *lightfName5,*lightfName6,*lightfName7,*lightfName8;
1121 FILE *fp1, *fp2, *fp3, *fp4, *fp5, *fp6, *fp7, *fp8;
1123 // --- Reading light tables for ZN
1124 lightfName1 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362207s");
1125 if((fp1 = fopen(lightfName1,"r")) == NULL){
1126 printf("Cannot open file fp1 \n");
1129 lightfName2 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362208s");
1130 if((fp2 = fopen(lightfName2,"r")) == NULL){
1131 printf("Cannot open file fp2 \n");
1134 lightfName3 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362209s");
1135 if((fp3 = fopen(lightfName3,"r")) == NULL){
1136 printf("Cannot open file fp3 \n");
1139 lightfName4 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362210s");
1140 if((fp4 = fopen(lightfName4,"r")) == NULL){
1141 printf("Cannot open file fp4 \n");
1145 for(k=0; k<fNalfan; k++){
1146 for(j=0; j<fNben; j++){
1147 fscanf(fp1,"%f",&fTablen[0][k][j]);
1148 fscanf(fp2,"%f",&fTablen[1][k][j]);
1149 fscanf(fp3,"%f",&fTablen[2][k][j]);
1150 fscanf(fp4,"%f",&fTablen[3][k][j]);
1158 // --- Reading light tables for ZP and ZEM
1159 lightfName5 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552207s");
1160 if((fp5 = fopen(lightfName5,"r")) == NULL){
1161 printf("Cannot open file fp5 \n");
1164 lightfName6 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552208s");
1165 if((fp6 = fopen(lightfName6,"r")) == NULL){
1166 printf("Cannot open file fp6 \n");
1169 lightfName7 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552209s");
1170 if((fp7 = fopen(lightfName7,"r")) == NULL){
1171 printf("Cannot open file fp7 \n");
1174 lightfName8 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552210s");
1175 if((fp8 = fopen(lightfName8,"r")) == NULL){
1176 printf("Cannot open file fp8 \n");
1180 for(k=0; k<fNalfap; k++){
1181 for(j=0; j<fNbep; j++){
1182 fscanf(fp5,"%f",&fTablep[0][k][j]);
1183 fscanf(fp6,"%f",&fTablep[1][k][j]);
1184 fscanf(fp7,"%f",&fTablep[2][k][j]);
1185 fscanf(fp8,"%f",&fTablep[3][k][j]);
1193 //_____________________________________________________________________________
1194 void AliZDCv2::StepManager()
1197 // Routine called at every step in the Zero Degree Calorimeters
1200 Int_t j, vol[2], ibeta=0, ialfa, ibe, nphe;
1201 Float_t x[3], xdet[3], destep, hits[10], m, ekin, um[3], ud[3], be, out;
1203 Float_t xalic[3], z, guiEff, guiPar[4]={0.31,-0.0004,0.0197,0.7958};
1204 TLorentzVector s, p;
1207 for (j=0;j<10;j++) hits[j]=-999.;
1209 // --- This part is for no shower developement in beam pipe and TDI
1210 // If particle interacts with beam pipe or TDI -> return
1211 if((gMC->GetMedium() == fMedSensPI) || (gMC->GetMedium() == fMedSensTDI)){
1212 // If option NoShower is set -> StopTrack
1214 if(gMC->GetMedium() == fMedSensPI) {
1215 knamed = gMC->CurrentVolName();
1216 if(!strncmp(knamed,"YMQ",3)) fpLostIT += 1;
1217 if(!strncmp(knamed,"YD1",3)) fpLostD1 += 1;
1219 else if(gMC->GetMedium() == fMedSensTDI){ // NB->Cu = TDI or D1 vacuum chamber
1220 knamed = gMC->CurrentVolName();
1221 if(!strncmp(knamed,"MD1",3)) fpLostD1 += 1;
1222 if(!strncmp(knamed,"QTD",3)) fpLostTDI += 1;
1224 printf("\n # of spectators lost in IT = %d\n",fpLostIT);
1225 printf("\n # of spectators lost in D1 = %d\n",fpLostD1);
1226 printf("\n # of spectators lost in TDI = %d\n\n",fpLostTDI);
1232 if((gMC->GetMedium() == fMedSensZN) || (gMC->GetMedium() == fMedSensZP) ||
1233 (gMC->GetMedium() == fMedSensGR) || (gMC->GetMedium() == fMedSensF1) ||
1234 (gMC->GetMedium() == fMedSensF2) || (gMC->GetMedium() == fMedSensZEM)){
1237 //Particle coordinates
1238 gMC->TrackPosition(s);
1239 for(j=0; j<=2; j++) x[j] = s[j];
1244 // Determine in which ZDC the particle is
1245 knamed = gMC->CurrentVolName();
1246 if(!strncmp(knamed,"ZN",2)) vol[0]=1;
1247 else if(!strncmp(knamed,"ZP",2)) vol[0]=2;
1248 else if(!strncmp(knamed,"ZE",2)) vol[0]=3;
1250 // Determine in which quadrant the particle is
1251 if(vol[0]==1){ //Quadrant in ZN
1252 // Calculating particle coordinates inside ZN
1253 xdet[0] = x[0]-fPosZN[0];
1254 xdet[1] = x[1]-fPosZN[1];
1255 // Calculating quadrant in ZN
1257 if(xdet[1]>=0.) vol[1]=1;
1258 else if(xdet[1]<0.) vol[1]=3;
1260 else if(xdet[0]>0.){
1261 if(xdet[1]>=0.) vol[1]=2;
1262 else if(xdet[1]<0.) vol[1]=4;
1264 if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
1265 printf("\n ZDC StepManager->ERROR in ZN!!! vol[1] = %d, xdet[0] = %f,"
1266 "xdet[1] = %f\n",vol[1], xdet[0], xdet[1]);
1269 else if(vol[0]==2){ //Quadrant in ZP
1270 // Calculating particle coordinates inside ZP
1271 xdet[0] = x[0]-fPosZP[0];
1272 xdet[1] = x[1]-fPosZP[1];
1273 if(xdet[0]>=fDimZP[0]) xdet[0]=fDimZP[0]-0.01;
1274 if(xdet[0]<=-fDimZP[0]) xdet[0]=-fDimZP[0]+0.01;
1275 // Calculating tower in ZP
1276 Float_t xqZP = xdet[0]/(fDimZP[0]/2.);
1277 for(int i=1; i<=4; i++){
1278 if(xqZP>=(i-3) && xqZP<(i-2)){
1283 if((vol[1]!=1) && (vol[1]!=2) && (vol[1]!=3) && (vol[1]!=4))
1284 printf(" ZDC StepManager->ERROR in ZP!!! vol[1] = %d, xdet[0] = %f,"
1285 "xdet[1] = %f\n",vol[1], xdet[0], xdet[1]);
1288 // Quadrant in ZEM: vol[1] = 1 -> particle in 1st ZEM (placed at x = 8.5 cm)
1289 // vol[1] = 2 -> particle in 2nd ZEM (placed at x = -8.5 cm)
1290 else if(vol[0] == 3){
1293 // Particle x-coordinate inside ZEM1
1294 xdet[0] = x[0]-fPosZEM[0];
1298 // Particle x-coordinate inside ZEM2
1299 xdet[0] = x[0]+fPosZEM[0];
1301 xdet[1] = x[1]-fPosZEM[1];
1304 // Store impact point and kinetic energy of the ENTERING particle
1306 if(gMC->IsTrackEntering()){
1308 gMC->TrackMomentum(p);
1310 // Impact point on ZDC
1318 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);
1323 if(vol[0]==1) printf("\n # of detected neutrons = %d\n\n",fpDetected);
1324 if(vol[0]==2) printf("\n # of detected protons = %d\n\n",fpDetected);
1329 // Charged particles -> Energy loss
1330 if((destep=gMC->Edep())){
1331 if(gMC->IsTrackStop()){
1332 gMC->TrackMomentum(p);
1333 m = gMC->TrackMass();
1338 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);
1344 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);
1350 // *** Light production in fibres
1351 if((gMC->GetMedium() == fMedSensF1) || (gMC->GetMedium() == fMedSensF2)){
1353 //Select charged particles
1354 if((destep=gMC->Edep())){
1356 // Particle velocity
1358 gMC->TrackMomentum(p);
1359 Float_t ptot=TMath::Sqrt(p[0]*p[0]+p[1]*p[1]+p[2]*p[2]);
1360 if(p[3] > 0.00001) beta = ptot/p[3];
1362 if(beta<0.67)return;
1363 else if((beta>=0.67) && (beta<=0.75)) ibeta = 0;
1364 else if((beta>0.75) && (beta<=0.85)) ibeta = 1;
1365 else if((beta>0.85) && (beta<=0.95)) ibeta = 2;
1366 else if(beta>0.95) ibeta = 3;
1368 // Angle between particle trajectory and fibre axis
1369 // 1 -> Momentum directions
1373 gMC->Gmtod(um,ud,2);
1374 // 2 -> Angle < limit angle
1375 Double_t alfar = TMath::ACos(ud[2]);
1376 Double_t alfa = alfar*kRaddeg;
1377 if(alfa>=110.) return;
1379 ialfa = Int_t(1.+alfa/2.);
1381 // Distance between particle trajectory and fibre axis
1382 gMC->TrackPosition(s);
1383 for(j=0; j<=2; j++){
1386 gMC->Gmtod(x,xdet,1);
1387 if(TMath::Abs(ud[0])>0.00001){
1388 Float_t dcoeff = ud[1]/ud[0];
1389 be = TMath::Abs((xdet[1]-dcoeff*xdet[0])/TMath::Sqrt(dcoeff*dcoeff+1.));
1392 be = TMath::Abs(ud[0]);
1395 ibe = Int_t(be*1000.+1);
1396 //if((vol[0]==1)) radius = fFibZN[1];
1397 //else if((vol[0]==2)) radius = fFibZP[1];
1399 //Looking into the light tables
1400 Float_t charge = gMC->TrackCharge();
1402 if((vol[0]==1)) { // (1) ZN fibres
1403 if(ibe>fNben) ibe=fNben;
1404 out = charge*charge*fTablen[ibeta][ialfa][ibe];
1405 nphe = gRandom->Poisson(out);
1407 //if(ibeta==3) printf("\t %f \t %f \t %f\n",alfa, be, out);
1408 //printf("\t ibeta = %d, ialfa = %d, ibe = %d -> nphe = %d\n\n",ibeta,ialfa,ibe,nphe);
1409 if(gMC->GetMedium() == fMedSensF1){
1410 hits[7] = nphe; //fLightPMQ
1413 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);
1417 hits[8] = nphe; //fLightPMC
1419 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);
1422 else if((vol[0]==2)) { // (2) ZP fibres
1423 if(ibe>fNbep) ibe=fNbep;
1424 out = charge*charge*fTablep[ibeta][ialfa][ibe];
1425 nphe = gRandom->Poisson(out);
1426 if(gMC->GetMedium() == fMedSensF1){
1427 hits[7] = nphe; //fLightPMQ
1430 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);
1434 hits[8] = nphe; //fLightPMC
1436 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);
1439 else if((vol[0]==3)) { // (3) ZEM fibres
1440 if(ibe>fNbep) ibe=fNbep;
1441 out = charge*charge*fTablep[ibeta][ialfa][ibe];
1442 gMC->TrackPosition(s);
1443 for(j=0; j<=2; j++){
1446 // z-coordinate from ZEM front face
1447 // NB-> fPosZEM[2]+fZEMLength = -1000.+2*10.3 = 979.69 cm
1448 z = -xalic[2]+fPosZEM[2]+2*fZEMLength-xalic[1];
1449 // z = xalic[2]-fPosZEM[2]-fZEMLength-xalic[1]*(TMath::Tan(45.*kDegrad));
1450 // printf("\n fPosZEM[2]+2*fZEMLength = %f", fPosZEM[2]+2*fZEMLength);
1451 guiEff = guiPar[0]*(guiPar[1]*z*z+guiPar[2]*z+guiPar[3]);
1453 nphe = gRandom->Poisson(out);
1454 // printf(" out*guiEff = %f nphe = %d", out, nphe);
1457 hits[8] = nphe; //fLightPMC (ZEM1)
1459 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);
1462 hits[7] = nphe; //fLightPMQ (ZEM2)
1465 AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits);