/************************************************************************** * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * * * * Author: The ALICE Off-line Project. * * Contributors are mentioned in the code where appropriate. * * * * Permission to use, copy, modify and distribute this software and its * * documentation strictly for non-commercial purposes is hereby granted * * without fee, provided that the above copyright notice appears in all * * copies and that both the copyright notice and this permission notice * * appear in the supporting documentation. The authors make no claims * * about the suitability of this software for any purpose. It is * * provided "as is" without express or implied warranty. * **************************************************************************/ // $Id$ // ----------------------------------- // Class AliMUONTriggerGeometryBuilder // ----------------------------------- // MUON Trigger stations geometry // construction class. // Author: Philippe Crochet (LPCCFd) #include #include #include "AliLog.h" #include "AliRun.h" #include "AliMUONTriggerGeometryBuilder.h" #include "AliMUON.h" #include "AliMUONConstants.h" #include "AliMUONGeometryModule.h" #include "AliMUONGeometryEnvelopeStore.h" /// \cond CLASSIMP ClassImp(AliMUONTriggerGeometryBuilder) /// \endcond //______________________________________________________________________________ AliMUONTriggerGeometryBuilder::AliMUONTriggerGeometryBuilder(AliMUON* muon) : AliMUONVGeometryBuilder(16, 4), fMUON(muon) { // Standard constructor } //______________________________________________________________________________ AliMUONTriggerGeometryBuilder::AliMUONTriggerGeometryBuilder() : AliMUONVGeometryBuilder(), fMUON(0) { // Default constructor } //______________________________________________________________________________ AliMUONTriggerGeometryBuilder::~AliMUONTriggerGeometryBuilder() { // } // // public methods // //______________________________________________________________________________ void AliMUONTriggerGeometryBuilder::CreateGeometry() { // From AliMUONv1::CreateGeometry() /* zpos1 and zpos2 are the middle of the first and second planes of station 1 (+1m for second station): zpos1=(zpos1m+zpos1p)/2=(15999+16071)/2=16035 mm, thick/2=40 mm zpos2=(zpos2m+zpos2p)/2=(16169+16241)/2=16205 mm, thick/2=40 mm zposxm and zposxp= middles of gaz gaps within a detection plane rem: the total thickness accounts for 1 mm of al on both side of the RPCs (see zpos1 and zpos2) */ Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099; Int_t idAir= idtmed[1100]; // medium 1 Int_t idAlu1=idtmed[1103]; // medium 4 Int_t detElemId=0; // Detection Element Number Float_t tpar[3]; Double_t dpar[3]; // vertical gap between right and left chambers (kDXZERO*2=4cm) const Float_t kDXZERO=2.; // main distances for chamber definition in first plane/first station const Float_t kXMIN=34.; const Float_t kXMED=51.; const Float_t kXMAX=255.; // 090704 kXMAX changed from 272 to 255. // (see fig.2-4 & 2-5 of Local Trigger Board PRR) // segmentation updated accordingly const Float_t kYMIN=34.; const Float_t kYMAX=51.; // inner/outer radius of flange between beam shield. and chambers (1/station) // const Float_t kRMIN[2]={50.,50.}; // const Float_t kRMAX[2]={64.,68.}; // z position of the middle of the gas gap in mother vol const Float_t kZm=-3.6; const Float_t kZp=+3.6; Float_t zpos1= AliMUONConstants::DefaultChamberZ(10); Double_t dstation = ( ( - AliMUONConstants::DefaultChamberZ(11)) - ( - AliMUONConstants::DefaultChamberZ(10)) ) /2.1; Float_t par[3]; par[2] = dstation; // ratio of zpos1m/zpos1p and inverse for first plane Float_t zmp=(zpos1-3.6)/(zpos1+3.6); Float_t zpm=1./zmp; Int_t icount=0; // chamber counter (0 1 2 3) for (Int_t istation=0; istation<2; istation++) { // loop on stations for (Int_t iplane=0; iplane<2; iplane++) { // loop on detection planes Int_t iVolNum=1; // counter Volume Number icount = Int_t(iplane<<0)+Int_t(istation<<1); par[0] = AliMUONConstants::Rmin(5+istation); par[1] = AliMUONConstants::Rmax(5+istation); Char_t volName[6]; sprintf(volName,"%s%d", "SC",11+icount); gMC->Gsvolu(volName,"TUBE", idAir, par, 3); //SetVolume(10+icount, volName); // Float_t zpos = AliMUONConstants::DefaultChamberZ(10+icount); /* removed 03/18/05 // Flange between beam shielding and RPC tpar[0]= kRMIN[istation]; tpar[1]= kRMAX[istation]; tpar[2]= 4.0; char volFlange[5]; sprintf(volFlange,"SF%dA",icount+1); gMC->Gsvolu(volFlange,"TUBE",idAlu1,tpar,3); // Al // changed by ivana //gMC->Gspos(volFlange,1,"ALIC",0.,0.,zpos,0,"MANY"); iChamber->GetGeometry()->GetEnvelopeStore() ->AddEnvelope(volFlange, 0, false, "MANY"); */ // scaling factor // Float_t zRatio = zpos / zpos1; Float_t zRatio = AliMUONConstants::DefaultRatioTriggerChamber(icount); // envelopes (same size except line 5, all virtual) char volEnv[18][5]; tpar[1] = kYMIN * zRatio; tpar[2] = 0.4; Int_t i=0; // counter for (Int_t icolumn=0; icolumn<2; icolumn++) { for (Int_t iline=1; iline<10; iline++){ tpar[0] = (kXMAX/2.) * zRatio; if (iline==5) tpar[0] = ((kXMAX-kXMED)/2.)*zRatio; if (icolumn==0) sprintf(volEnv[i],"S%dR%d",icount,iline); else sprintf(volEnv[i],"S%dL%d",icount,iline); // gMC->Gsvolu(volEnv[i],"BOX",idAir,tpar,0); i++; } } // chamber prototype tpar[0]= 0.; tpar[1]= 0.; tpar[2]= 0.; char volAlu[5]; // Alu char volBak[5]; // Bakelite char volGaz[5]; // Gas streamer sprintf(volAlu,"SC%dA",icount+1); sprintf(volBak,"SB%dA",icount+1); sprintf(volGaz,"S%dG",icount+11); gMC->Gsvolu(volAlu,"BOX",idAlu1,tpar,0); // Al gMC->Gsvolu(volBak,"BOX",idtmed[1107],tpar,0); // Bakelite gMC->Gsvolu(volGaz,"BOX",idtmed[1106],tpar,0); // Gas streamer tpar[0] = -1.; tpar[1] = -1.; tpar[2] = 0.1; gMC->Gsposp(volGaz,1,volBak,0.,0.,0.,0,"ONLY",tpar,3); tpar[2] = 0.3; gMC->Gsposp(volBak,1,volAlu,0.,0.,0.,0,"ONLY",tpar,3); // chamber type A Float_t xEnv = (kDXZERO+kXMED+(kXMAX-kXMED)/2.)*zRatio; Float_t yEnvM = 0.; // y low position of envelope in chamber Float_t yEnvP = 0.; // y up position of envelope in chamber Float_t yEnvPsave = 0.; // tmp data Float_t yEnvMsave = 0.; // tmp data Float_t xpos = 0.; // x position of RPC in envelope Float_t ypos = 0.; // y position of RPC in envelope dpar[2] = 0.4; dpar[0] = ((kXMAX-kXMED)/2.)*zRatio; dpar[1] = kYMIN * zRatio; detElemId = (10+icount+1)*100; GetEnvelopes(16+icount)->AddEnvelope(volEnv[4], detElemId, true, TGeoTranslation(xEnv,yEnvP,kZp)); detElemId = (10+icount+1)*100+9; GetEnvelopes(16+icount)->AddEnvelope(volEnv[13], detElemId, true, TGeoTranslation(-xEnv,yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[4],iVolNum++,3, dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[13],iVolNum++,3, dpar); // chamber type B (plus envelope chambers B & C) xEnv = (kDXZERO+kXMAX/2.)*zRatio; yEnvPsave = yEnvP; yEnvMsave = yEnvM; yEnvP = (yEnvMsave + kYMIN * zRatio ) * zpm + kYMIN * zRatio; yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio; dpar[0] = ((kXMAX-kXMIN)/2.) * zRatio; dpar[1] = ((kYMAX-kYMIN)/2.) * zRatio; xpos = kXMIN/2. * zRatio; ypos = (kYMIN - kYMIN/4.) * zRatio; detElemId = (10+icount+1)*100+17; GetEnvelopes(16+icount)->AddEnvelope(volEnv[3], detElemId, true, TGeoTranslation( xEnv,-yEnvM,kZm)); detElemId = (10+icount+1)*100+1; GetEnvelopes(16+icount)->AddEnvelope(volEnv[5], detElemId, true, TGeoTranslation( xEnv, yEnvM,kZm)); detElemId = (10+icount+1)*100+10; GetEnvelopes(16+icount)->AddEnvelope(volEnv[12], detElemId, true, TGeoTranslation(-xEnv,-yEnvP,kZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); detElemId = (10+icount+1)*100+8; GetEnvelopes(16+icount)->AddEnvelope(volEnv[14], detElemId, true, TGeoTranslation(-xEnv, yEnvP,kZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[3],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[5],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[12],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[14],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar); // chamber type C (note: same Z than type B) dpar[0] = (kXMAX/2)*zRatio; dpar[1] = (kYMAX/2)*zRatio; xpos = 0.; ypos = ((kYMAX - kYMIN)/2.) * zRatio; GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[3],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[5],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[12],iVolNum++,TGeoTranslation(xpos,-ypos,0.),3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[14],iVolNum++,TGeoTranslation(xpos, ypos,0.),3,dpar); // chamber type D, E and F (same size) // D yEnvPsave = yEnvP; yEnvMsave = yEnvM; yEnvP = (yEnvMsave + kYMIN * zRatio ) * zpm + kYMIN * zRatio; yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio; dpar[0] = (kXMAX/2.)*zRatio; dpar[1] = kYMIN*zRatio; detElemId = (10+icount+1)*100+16; GetEnvelopes(16+icount)->AddEnvelope(volEnv[2], detElemId, true, TGeoTranslation(xEnv,-yEnvP,kZp)); detElemId = (10+icount+1)*100+2; GetEnvelopes(16+icount)->AddEnvelope(volEnv[6], detElemId, true, TGeoTranslation(xEnv, yEnvP,kZp)); detElemId = (10+icount+1)*100+11; GetEnvelopes(16+icount)->AddEnvelope(volEnv[11], detElemId, true, TGeoTranslation(-xEnv,-yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); detElemId = (10+icount+1)*100+7; GetEnvelopes(16+icount)->AddEnvelope(volEnv[15], detElemId, true, TGeoTranslation(-xEnv, yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[2],iVolNum++,3, dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[6],iVolNum++,3, dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[11],iVolNum++,3, dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[15],iVolNum++,3, dpar); // E yEnvPsave = yEnvP; yEnvMsave = yEnvM; yEnvP = (yEnvMsave + kYMIN * zRatio ) * zpm + kYMIN * zRatio; yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio; detElemId = (10+icount+1)*100+15; GetEnvelopes(16+icount)->AddEnvelope(volEnv[1], detElemId, true, TGeoTranslation(xEnv,-yEnvM,kZm)); detElemId = (10+icount+1)*100+3; GetEnvelopes(16+icount)->AddEnvelope(volEnv[7], detElemId, true, TGeoTranslation(xEnv, yEnvM,kZm)); detElemId = (10+icount+1)*100+12; GetEnvelopes(16+icount)->AddEnvelope(volEnv[10], detElemId, true, TGeoTranslation(-xEnv,-yEnvP,kZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); detElemId = (10+icount+1)*100+6; GetEnvelopes(16+icount)->AddEnvelope(volEnv[16], detElemId, true, TGeoTranslation(-xEnv, yEnvP,kZp),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[1],iVolNum++,3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[7],iVolNum++,3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[10],iVolNum++,3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[16],iVolNum++,3,dpar); // F yEnvPsave = yEnvP; yEnvMsave = yEnvM; yEnvP = (yEnvMsave + kYMIN * zRatio ) * zpm + kYMIN * zRatio; yEnvM = (yEnvPsave + kYMIN * zRatio ) * zmp + kYMIN * zRatio; detElemId = (10+icount+1)*100+14; GetEnvelopes(16+icount)->AddEnvelope(volEnv[0], detElemId, true, TGeoTranslation(xEnv,-yEnvP,kZp)); detElemId = (10+icount+1)*100+4; GetEnvelopes(16+icount)->AddEnvelope(volEnv[8], detElemId, true, TGeoTranslation(xEnv, yEnvP,kZp)); detElemId = (10+icount+1)*100+13; GetEnvelopes(16+icount)->AddEnvelope(volEnv[9], detElemId, true, TGeoTranslation(-xEnv,-yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); detElemId = (10+icount+1)*100+5; GetEnvelopes(16+icount)->AddEnvelope(volEnv[17], detElemId, true, TGeoTranslation(-xEnv, yEnvM,kZm),TGeoRotation("rot1",90.,180.,90.,90.,180.,0.)); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[0],iVolNum++,3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[8],iVolNum++,3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[9],iVolNum++,3,dpar); GetEnvelopes(16+icount)->AddEnvelopeConstituentParam(volAlu,volEnv[17],iVolNum++,3,dpar); } // end loop on detection planes } // end loop on stations } //______________________________________________________________________________ void AliMUONTriggerGeometryBuilder::SetTransformations() { // Defines the transformations for the trigger chambers. // --- if (gAlice->GetModule("SHIL")) { SetMotherVolume(16, "YOUT2"); SetMotherVolume(17, "YOUT2"); SetMotherVolume(18, "YOUT2"); SetMotherVolume(19, "YOUT2"); } SetVolume(16, "SC11"); SetVolume(17, "SC12"); SetVolume(18, "SC13"); SetVolume(19, "SC14"); Double_t zpos1= AliMUONConstants::DefaultChamberZ(10); SetTranslation(16, TGeoTranslation(0., 0., zpos1)); zpos1= AliMUONConstants::DefaultChamberZ(11); SetTranslation(17, TGeoTranslation(0., 0., zpos1)); zpos1= AliMUONConstants::DefaultChamberZ(12); SetTranslation(18, TGeoTranslation(0., 0., zpos1)); zpos1= AliMUONConstants::DefaultChamberZ(13); SetTranslation(19, TGeoTranslation(0., 0., zpos1)); } //______________________________________________________________________________ void AliMUONTriggerGeometryBuilder::SetSensitiveVolumes() { // Defines the sensitive volumes for trigger station chambers. // --- GetGeometry(16)->SetSensitiveVolume("S11G"); GetGeometry(17)->SetSensitiveVolume("S12G"); GetGeometry(18)->SetSensitiveVolume("S13G"); GetGeometry(19)->SetSensitiveVolume("S14G"); }