/**************************************************************************
* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
* *
* Author: The ALICE Off-line Project. *
* Contributors are mentioned in the code where appropriate. *
* *
* Permission to use, copy, modify and distribute this software and its *
* documentation strictly for non-commercial purposes is hereby granted *
* without fee, provided that the above copyright notice appears in all *
* copies and that both the copyright notice and this permission notice *
* appear in the supporting documentation. The authors make no claims *
* about the suitability of this software for any purpose. It is *
* provided "as is" without express or implied warranty. *
**************************************************************************/
/*
$Log$
Revision 1.8 2000/06/09 10:31:36 hristov
sqrt changed to TMath::Sqrt
Revision 1.7 1999/11/03 18:01:40 fca
Remove non orthogonal unused matrix
Revision 1.6 1999/09/29 09:24:28 fca
Introduction of the Copyright and cvs Log
*/
///////////////////////////////////////////////////////////////////////////////
// //
// Photon Multiplicity Detector Version 1 //
// //
//Begin_Html
/*
*/
//End_Html
// //
///////////////////////////////////////////////////////////////////////////////
////
#include "AliPMDv1.h"
#include "AliRun.h"
#include "AliMC.h"
#include "AliConst.h"
#include "AliMagF.h"
static Int_t maxbox, kdet;
static Float_t thmin,thmax,zdist,zdist1,thlow,thhigh;
ClassImp(AliPMDv1)
//_____________________________________________________________________________
AliPMDv1::AliPMDv1()
{
//
// Default constructor
//
fMedSens=0;
}
//_____________________________________________________________________________
AliPMDv1::AliPMDv1(const char *name, const char *title)
: AliPMD(name,title)
{
//
// Standard constructor
//
fMedSens=0;
}
//_____________________________________________________________________________
void AliPMDv1::CreateGeometry()
{
//
// Create geometry for Photon Multiplicity Detector Version 1
//
//Begin_Html
/*
*/
//End_Html
//Begin_Html
/*
*/
//End_Html
CreatePads();
CreateInside();
}
//_____________________________________________________________________________
void AliPMDv1::CreateInside()
{
//
// Create inside of Pads
//
// -- Author : Y.P. VIYOGI, 07/05/1996.
// -- Modified: P.V.K.S.Baba(JU), 15-12-97.
// Sipmd, the dimension of TUBE mother volume of PMD, other dimensions
// like sip01.. are to place more tubes in the volume at different eta bins.
// Float_t sipmd[3] = { 40.,270.,15.};
// ORG Float_t sipmd[3] = { 0.,130.,15.};
Float_t sipmd[3] = { 0.,150.,15.};
// Float_t sip01[3] = { 10.,57.89,25.};
//Float_t sip02[3] = { 10.,64.03,25.};
//Float_t sip03[3] = { 10.,70.80,25.};
//Float_t sip04[3] = { 10.,78.32,25.};
//Float_t sip05[3] = { 10.,86.68,25.};
//Float_t sip06[3] = { 10.,95.91,25.};
//Float_t sip07[3] = { 10.,106.14,25.};
//Float_t sip08[3] = { 10.,117.48,25.};
//Float_t sip09[3] = { 10.,130.18,25.};
//Float_t sip10[3] = { 10.,144.18,25.};
//Float_t sip11[3] = { 10.,159.87,25.};
//Float_t sip12[3] = { 10.,177.43,25.};
//Float_t sip13[3] = { 10.,197.11,25.};
//Float_t sip14[3] = { 10.,219.28,25.};
//Float_t sipmdl[5] = { 10.,310.,25.,90.,270. };
//Float_t sipmdr[5] = { 10.,310.,25.,270.,90. };
const Float_t root3_4 = TMath::Sqrt(3.)/4.;
const Float_t root3_2 = TMath::Sqrt(3.)/2.;
// Float_t xiqa[4], yiqa[4];
Int_t i;
// Float_t siqad[4];
Float_t xp, yp, zp;
// Int_t idrotm[100];
Int_t num_mod;
Int_t jhrotc,jhrotac;
Int_t *idtmed = fIdtmed->GetArray()-599;
// VOLUMES Names : begining with D for all PMD volumes,
// The names of SIZE variables begin with S and have more meaningful
// characters as shown below.
// VOLUME SIZE MEDIUM : REMARKS
// ------ ----- ------ : ---------------------------
// DPMD SIPMD AIR : INSIDE PMD and its SIZE
// *** Define the DPMD Volume and fill with air ***
gMC->Gsvolu("DPMD", "TUBE", idtmed[698], sipmd, 3);
gMC->Gsatt("DPMD", "SEEN", 0);
// gMC->Gsvolu("PM01", "TUBE", idtmed[698], sip01, 3);
//gMC->Gsvolu("PM02", "TUBE", idtmed[698], sip02, 3);
//gMC->Gsvolu("PM03", "TUBE", idtmed[698], sip03, 3);
//gMC->Gsvolu("PM04", "TUBE", idtmed[698], sip04, 3);
//gMC->Gsvolu("PM05", "TUBE", idtmed[698], sip05, 3);
//gMC->Gsvolu("PM06", "TUBE", idtmed[698], sip06, 3);
//gMC->Gsvolu("PM07", "TUBE", idtmed[698], sip07, 3);
//gMC->Gsvolu("PM08", "TUBE", idtmed[698], sip08, 3);
//gMC->Gsvolu("PM09", "TUBE", idtmed[698], sip09, 3);
//gMC->Gsvolu("PM10", "TUBE", idtmed[698], sip10, 3);
//gMC->Gsvolu("PM11", "TUBE", idtmed[698], sip11, 3);
//gMC->Gsvolu("PM12", "TUBE", idtmed[698], sip12, 3);
//gMC->Gsvolu("PM13", "TUBE", idtmed[698], sip13, 3);
//gMC->Gsvolu("PM14", "TUBE", idtmed[698], sip14, 3);
//gMC->Gsvolu("PMDL", "TUBS", idtmed[698], sipmdl, 5);
//gMC->Gsvolu("PMDR", "TUBS", idtmed[698], sipmdr, 5);
//
const Int_t npad2=72;
const Float_t boundary=0.0;
const Float_t offset=0.05;
// hexd1 array contains parameters of unit cell (polygon with 6 sides)
// new cells having 64 sq.mm. area
Float_t hexd1[10] = {0.,360.,6,2,-0.25,0.,0.25,0.25,0.,0.25};
// Float_t hexd1[10] = {0.,360.,6,2,-0.4,0.,0.40,0.4,0.,0.40};
// dpara_sm array contains parameters of Supermodule rhombus
Float_t dpara_sm[6] = {12.5,12.5,0.8,30.,0.,0.};
//suprmodule side is 2*7 mm bigger than the total size of 72 cells array.
dpara_sm[0]=(npad2+0.25)*hexd1[6] + boundary;
dpara_sm[1] = dpara_sm[0] *root3_2;
//dpara_dm11 array contains parameters of the imaginary volume DM11, this is just a
// little more than the side of a supermodule. total side = 2*39 cm.
Float_t dpara_dm11[6] = {12.5,12.5,0.8,30.,0.,0.};
dpara_dm11[0]=dpara_sm[0] + offset;
dpara_dm11[1] = dpara_dm11[0] *root3_2;
dpara_dm11[2]= 6.2/2.;
//
Float_t dpara_hole[6] = {12.5,12.5,0.8,30.,0.,0.};
dpara_hole[0]=dpara_dm11[0]/3.;
dpara_hole[1] = dpara_hole[0] *root3_2;
dpara_hole[2]= 6.2/2.;
gMC->Gsvolu("HOLE", "PARA", idtmed[698], dpara_hole, 6);
gMC->Gsatt("HOLE", "SEEN", 1);
//
AliMatrix(jhrotc, 90., 30., 90., 120., 0., 0.);
AliMatrix(jhrotac, 90., 330., 90., 240., 0., 0.);
// delx = full side of the supermodule 78 cm.
Float_t delx=2*dpara_dm11[0];
Float_t x1= delx*root3_4;
Float_t x2= delx*root3_4 + delx*root3_2;
Float_t x3= delx*root3_4 + 2*delx*root3_2;
// xpos are the x-coordinates of the centres of 13 supermodules on the left half of the
// PMD. Numbering of the boxes are :
// starting from the bottom part of the first column
// 1,2,3,4,5,6 (going downwards), then second column from bottom, 7,8,9,10,11
// then third
// cloumn from top 12,13,14,15.
Float_t xpos[15]={-x1,-x1,-x1,-x1,-x1,-x1,-x2,-x2,-x2,-x2,-x2,-x3,-x3,-x3,-x3};
Float_t x4=delx/4.;
// ypos are the y-coordinates of the 13 supermodules (identical for both halves).
// Float_t ypos[15]={(x4+2*delx),(x4+delx),x4,(x4-delx),x4-2*delx,
//x4-3*delx,-x4,-x4-delx,-x4-2*delx,-3*x4-delx,-x4-delx/2.,-3*x4+delx,-3*x4+2 //*delx};
Float_t ypos[15];
ypos[2]=x4;
ypos[1]=ypos[2]+delx;
ypos[0]=ypos[1]+delx;
ypos[3]=ypos[2]-delx;
ypos[4]=ypos[3]-delx;
ypos[5]=ypos[4]-delx;
ypos[6]=ypos[5]+delx/2;
ypos[7]=ypos[6]+delx;
ypos[8]=ypos[7]+delx;
ypos[9]=ypos[8]+delx;
ypos[10]=ypos[9]+delx;
ypos[11]=ypos[1];
ypos[12]=ypos[2];
ypos[13]=ypos[3];
ypos[14]=ypos[4];
// for (i = 0; i < 2; ++i) {
// num_mod=i+1;
//gMC->Gsposp("DM11", num_mod, "DPMD", xpos[i],ypos[i],0., jhrotac, "ONLY", dpara_dm11, 6);
// gMC->Gsposp("DM11", num_mod+13, "DPMD", TMath::Abs(xpos[i]),ypos[i],0., jhrotc, "ONLY", dpara_dm11, 6);
//printf("Num_mod %d\n",num_mod);
// }
maxbox=15;
for (i = 0; i < maxbox; ++i) {
num_mod=i+1;
gMC->Gsposp("DM11", num_mod, "DPMD", xpos[i],ypos[i],0., jhrotc, "ONLY", dpara_dm11, 6);
gMC->Gsposp("DM11", num_mod+15, "DPMD", TMath::Abs(xpos[i]),ypos[i],0., jhrotac, "ONLY", dpara_dm11, 6);
printf("Num_mod %d\n",num_mod);
}
// place four unit modules to create a hole of air.
Float_t xhole = dpara_hole[0]*root3_2;
Float_t yhole = dpara_hole[0]/2;
gMC->Gsposp("HOLE", 1, "DPMD", -xhole, yhole, 0., jhrotc, "ONLY", dpara_hole, 6);
gMC->Gsposp("HOLE", 3, "DPMD", xhole, yhole ,0., jhrotac, "ONLY", dpara_hole, 6);
yhole=yhole-dpara_hole[0]*2;
gMC->Gsposp("HOLE", 2, "DPMD", -xhole, yhole, 0., jhrotc, "ONLY", dpara_hole, 6);
gMC->Gsposp("HOLE", 4, "DPMD", xhole, yhole ,0., jhrotac, "ONLY", dpara_hole, 6);
// gMC->Gspos("PM01", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM02", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM03", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM04", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM05", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM06", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM07", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM08", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM09", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM10", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM11", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM12", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM13", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// gMC->Gspos("PM14", 1, "DPMD", 0.,0.,0., 0, "ONLY");
// --- Place the DPMD in ALICE with front edge 5.8m from vertex ---
xp = 0.;
yp = 0.;
zp = zdist1;
// gMC->Gspos("PMDL", 1, "DPMD", xp,yp,0., 0, "ONLY");
// gMC->Gspos("PMDR", 1, "DPMD", xp,yp,0., 0, "ONLY");
gMC->Gspos("DPMD", 1, "ALIC", xp,yp,zp, 0, "ONLY");
}
//_____________________________________________________________________________
void AliPMDv1::CreatePads()
{
//
// Create the geometry of the pads
// *** DEFINITION OF THE GEOMETRY OF THE PMD ***
// *** HEXAGONAL PADS WITH 10 MM SQUARE EQUIVALENT
// -- Author : S. Chattopadhyay, 02/04/1999.
// Basic unit is DP11, a hexagonal cell, which is placed inside another
// hexagonal cell (DS11) of larger radius, compared to DP11. The difference in r// adius gives the dimension of half width of each cell wall.
// These cells are placed as 72 x 72 array in a
// rhombus shaped supermodule (DW11). The rhombus shaped modules are designed
// to have closed packed structure.
// Each supermodule (SUPR), made of G10 is filled with following components
// SMSS --> SS backing,
// SMAR --> Gap between gas hexagonal cells and G10 backing.
// DW11 --> Ar-Co2 filled gas hexagonal cells.
// SMAR
// These supermodules are placed inside the main module (DM11), with Fe and
// Pb converter positioned between CPV and PMD.
// DM11 made of
// SUPR (rotated to place steel on the other side), this works as preshower
// when PMD is placed in -ve z.
// SUPB --> Pb converter
// SUFE --> Fe backing
// SUPR --> supermodule without rotation (this acts as CPV).
//
const Int_t npad2 = 72;
Float_t hexd1[10] = {0.,360.,6,2,-0.25,0.,0.25,0.25,0.,0.25};
//total wall thickness=0.2*2
Float_t hexd2[10] = {0.,360.,6,2,-0.25,0.,0.23,0.25,0.,0.23};
Int_t i, j;
Float_t xb, yb, zb;//, sw[3];
Int_t number;
Int_t ihrotm,irotdm;
const Float_t root3_cons = TMath::Sqrt(3.) /2.;
Int_t *idtmed = fIdtmed->GetArray()-599;
AliMatrix(ihrotm, 90., 30., 90., 120., 0., 0.);
AliMatrix(irotdm, 90., 180., 90., 270., 180., 0.);
zdist1 = fIn[2];
zdist = TMath::Abs(zdist1);
//
Int_t xrow=1;
Float_t dpara[6] = {12.5,12.5,0.4,30.,0.,0.};
dpara[0]=(npad2+0.25)*hexd1[6];
dpara[1] = dpara[0] *root3_cons;
//
//Subhasis, dimensional parameters of rhombus (dpara) as given to gsvolu
// rhombus to accomodate 72 x 72 hexagons, and with total 1.2cm extension
//(1mm tolerance on both side and 5mm thick G10 wall)
//
// **** PAD SIZE 10 MM SQUARE EQUIVALENT
//
// Inner hex filled with gas
gMC->Gsvolu("DP11", "PGON", idtmed[604], hexd2,10);
gMC->Gsatt("DP11", "SEEN", 0);
// Outer hex filled with Plastic
//plastic gMC->Gsvolu("DS11", "PGON", idtmed[616], hexd1,10);
// Iron
gMC->Gsvolu("DS11", "PGON", idtmed[614], hexd1,10);
gMC->Gsatt("DS11", "SEEN", 0);
// --- place inner hex inside outer hex
gMC->Gsposp("DP11", 1, "DS11", 0., 0., 0., 0, "ONLY", hexd2, 10);
// Rhombus shaped supermodules (defined by PARA)
// volume for SUPERMODULE
const Float_t boundary=0.0;
const Float_t offset=0.05;
Float_t dpara_sm[6] = {12.5,12.5,0.8,30.,0.,0.};
dpara_sm[0]=(npad2+0.25)*hexd1[6] + boundary;
dpara_sm[1] = dpara_sm[0] *root3_cons;
//
gMC->Gsvolu("SUPR","PARA", idtmed[607], dpara_sm, 6);
gMC->Gsatt("SUPR", "SEEN", 0);
// SS
Float_t dpara_ss[6] = {12.5,12.5,8.,30.,0.,0.};
dpara_ss[0]= dpara[0];
dpara_ss[1]= dpara[1];
dpara_ss[2]= 0.15/2.;
//
gMC->Gsvolu("SMSS","PARA", idtmed[601], dpara_ss, 6);
gMC->Gsatt("SMSS", "SEEN", 0);
// Air
Float_t dpara_air[6] = {12.5,12.5,8.,30.,0.,0.};
dpara_air[0]= dpara[0] - 0.5;
dpara_air[1]= dpara_air[0] * root3_cons;
dpara_air[2]= 0.1/2.;
// gMC->Gsvolu("SMAR","PARA", idtmed[604], dpara_air, 6);
gMC->Gsvolu("SMAR","PARA", idtmed[698], dpara_air, 6);
gMC->Gsatt("SMAR", "SEEN", 0);
//
// volume for gas chamber (DW11)
//
// gMC->Gsvolu("DW11","PARA", idtmed[604], dpara, 6);
gMC->Gsvolu("DW11","PARA", idtmed[698], dpara, 6);
gMC->Gsatt("DW11", "SEEN", 0);
// Place outer hex inside DW11
yb = -dpara[1] + (1./root3_cons)*hexd1[6];
zb = 0.;
for (j = 1; j <= npad2; ++j) {
xb =-(dpara[0] + dpara[1]*0.577) + 2*hexd1[6];
if(xrow >= 2){
xb = xb+(xrow-1)*hexd1[6];
}
for (i = 1; i <= npad2; ++i) {
number = i+(j-1)*npad2;
gMC->Gsposp("DS11", number, "DW11", xb, yb, zb, ihrotm, "ONLY", hexd1, 10);
xb += (hexd1[6]*2.);
}
xrow = xrow+1;
yb += (hexd1[6]*TMath::Sqrt(3.));
}
Float_t z_ss,z_air1,z_air2,z_gas;
// Place other components inside super module
z_ss=-dpara_sm[2]+dpara_ss[2];
gMC->Gspos("SMSS", 1, "SUPR", 0., 0., z_ss, 0, "ONLY");
z_air1=z_ss+dpara_ss[2] +dpara_air[2];
gMC->Gspos("SMAR", 1, "SUPR", 0., 0., z_air1, 0, "ONLY");
z_gas=z_air1+dpara_air[2]+dpara[2]+0.05;
gMC->Gspos("DW11", 1, "SUPR", 0., 0., z_gas, 0, "ONLY");
z_air2=z_gas+dpara[2]+0.05+dpara_air[2];
gMC->Gspos("SMAR", 2, "SUPR", 0., 0., z_air2, 0, "ONLY");
// --- DEFINE MODules, iron, and lead voLUMES
// volume for SUPERMODULE
// Pb
Float_t dpara_pb[6] = {12.5,12.5,8.,30.,0.,0.};
dpara_pb[0]=dpara_sm[0];
dpara_pb[1]=dpara_sm[1];
dpara_pb[2]=1.5/2.;
// dpara_pb[2]=1.0/2.;
gMC->Gsvolu("SUPB","PARA", idtmed[600], dpara_pb, 6);
//--- gMC->Gsvolu("SUPB","PARA", idtmed[698], dpara_pb, 6);
gMC->Gsatt("SUPB", "SEEN", 0);
// tungsten
Float_t dpara_tg[6] = {12.5,12.5,8.,30.,0.,0.};
dpara_tg[0]=dpara_sm[0];
dpara_tg[1]=dpara_sm[1];
dpara_tg[2]=1.0/2.;
gMC->Gsvolu("SUTG","PARA", idtmed[606], dpara_tg, 6);
gMC->Gsatt("SUTG", "SEEN", 0);
// Fe
Float_t dpara_fe[6] = {12.5,12.5,8.,30.,0.,0.};
dpara_fe[0]=dpara_sm[0];
dpara_fe[1]=dpara_sm[1];
dpara_fe[2]=0.5/2.;
gMC->Gsvolu("SUFE","PARA", idtmed[601], dpara_fe, 6);
gMC->Gsatt("SUFE", "SEEN", 0);
// volume for DM11
Float_t dpara_dm11[6] = {12.5,12.5,0.8,30.,0.,0.};
dpara_dm11[0]=dpara_sm[0]+offset;
dpara_dm11[1] = dpara_dm11[0] *root3_cons;
dpara_dm11[2]= 6.2/2.;
//
gMC->Gsvolu("DM11","PARA", idtmed[698], dpara_dm11, 6);
gMC->Gsatt("DM11", "SEEN", 1);
// position super module inside DM11
Float_t z_ps,z_pb,z_fe,z_cv;
z_ps=-dpara_dm11[2]+dpara_sm[2];
gMC->Gspos("SUPR", 2, "DM11", 0., 0., z_ps, irotdm, "ONLY");
z_pb=z_ps+dpara_sm[2]+dpara_pb[2];
gMC->Gspos("SUPB", 1, "DM11", 0., 0., z_pb, 0, "ONLY");
z_fe=z_pb+dpara_pb[2]+dpara_fe[2];
gMC->Gspos("SUFE", 1, "DM11", 0., 0., z_fe, 0, "ONLY");
z_cv=z_fe+dpara_fe[2]+dpara_sm[2];
gMC->Gspos("SUPR", 1, "DM11", 0., 0., z_cv, 0, "ONLY");
//
}
//_____________________________________________________________________________
void AliPMDv1::DrawModule()
{
//
// Draw a shaded view of the Photon Multiplicity Detector
//
gMC->Gsatt("*", "seen", -1);
gMC->Gsatt("alic", "seen", 0);
//
// Set the visibility of the components
//
gMC->Gsatt("DP11","seen",0);
gMC->Gsatt("DS11","seen",0);
gMC->Gsatt("DW11","seen",0);
gMC->Gsatt("DM11","seen",1);
gMC->Gsatt("HOLE","seen",1);
gMC->Gsatt("DPMD","seen",0);
//
gMC->Gdopt("hide", "on");
gMC->Gdopt("shad", "on");
gMC->Gsatt("*", "fill", 7);
gMC->SetClipBox(".");
gMC->SetClipBox("*", 0, 3000, -3000, 3000, -6000, 6000);
gMC->DefaultRange();
gMC->Gdraw("alic", 40, 30, 0, 22, 20.5, .02, .02);
gMC->Gdhead(1111, "Photon Multiplicity Detector Version 1");
//gMC->Gdman(17, 5, "MAN");
gMC->Gdopt("hide", "off");
}
//_____________________________________________________________________________
void AliPMDv1::CreateMaterials()
{
//
// Create materials for the PMD version 1
//
// ORIGIN : Y. P. VIYOGI
//
// --- The Argon- CO2 mixture ---
Float_t ag[2] = { 39.95 };
Float_t zg[2] = { 18. };
Float_t wg[2] = { .8,.2 };
Float_t dar = .001782; // --- Ar density in g/cm3 ---
// --- CO2 ---
Float_t ac[2] = { 12.,16. };
Float_t zc[2] = { 6.,8. };
Float_t wc[2] = { 1.,2. };
Float_t dc = .001977;
Float_t dco = .002; // --- CO2 density in g/cm3 ---
Float_t absl, radl, a, d, z;
Float_t dg;
Float_t x0ar;
Float_t x0xe=2.4;
Float_t dxe=0.005858;
Float_t buf[1];
Int_t nbuf;
Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 };
Float_t zsteel[4] = { 26.,24.,28.,14. };
Float_t wsteel[4] = { .715,.18,.1,.005 };
Int_t *idtmed = fIdtmed->GetArray()-599;
Int_t isxfld = gAlice->Field()->Integ();
Float_t sxmgmx = gAlice->Field()->Max();
// --- Define the various materials for GEANT ---
AliMaterial(1, "Pb $", 207.19, 82., 11.35, .56, 18.5);
x0ar = 19.55 / dar;
AliMaterial(2, "Argon$", 39.95, 18., dar, x0ar, 6.5e4);
AliMixture(3, "CO2 $", ac, zc, dc, -2, wc);
AliMaterial(4, "Al $", 26.98, 13., 2.7, 8.9, 18.5);
AliMaterial(6, "Fe $", 55.85, 26., 7.87, 1.76, 18.5);
AliMaterial(7, "W $", 183.85, 74., 19.3, .35, 10.3);
AliMaterial(8, "G10 $", 20., 10., 1.7, 19.4, 999.);
AliMaterial(9, "SILIC$", 28.09, 14., 2.33, 9.36, 45.);
AliMaterial(10, "Be $", 9.01, 4., 1.848, 35.3, 36.7);
AliMaterial(15, "Cu $", 63.54, 29., 8.96, 1.43, 15.);
AliMaterial(16, "C $", 12.01, 6., 2.265, 18.8, 49.9);
AliMaterial(17, "POLYCARBONATE $", 20., 10., 1.2, 34.6, 999.);
// AliMaterial(31, "Xenon$", 131.3, 54., dxe, x0xe, 6.5e4);
AliMaterial(96, "MYLAR$", 8.73, 4.55, 1.39, 28.7, 62.);
AliMaterial(97, "CONCR$", 20., 10., 2.5, 10.7, 40.);
AliMaterial(98, "Vacum$", 1e-9, 1e-9, 1e-9, 1e16, 1e16);
AliMaterial(99, "Air $", 14.61, 7.3, .0012, 30420., 67500.);
AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel);
// define gas-mixtures
char namate[21];
gMC->Gfmate((*fIdmate)[3], namate, a, z, d, radl, absl, buf, nbuf);
ag[1] = a;
zg[1] = z;
dg = (dar * 4 + dco) / 5;
AliMixture(5, "ArCO2$", ag, zg, dg, 2, wg);
// Define tracking media
AliMedium(1, "Pb conv.$", 1, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1);
AliMedium(2, " S steel$", 19, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1);
AliMedium(7, "W conv.$", 7, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1);
AliMedium(8, "G10plate$", 8, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1);
AliMedium(4, "Al $", 4, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1);
AliMedium(6, "Fe $", 6, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1);
AliMedium(5, "ArCO2 $", 5, 1, 0, isxfld, sxmgmx, .1, .1, .1, .1);
AliMedium(9, "SILICON $", 9, 1, 0, isxfld, sxmgmx, .1, .1, .1, .1);
AliMedium(10, "Be $", 10, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1);
AliMedium(98, "Vacuum $", 98, 0, 0, isxfld, sxmgmx, 1., .1, .1, 10);
AliMedium(99, "Air gaps$", 99, 0, 0, isxfld, sxmgmx, 1., .1, .1, .1);
AliMedium(15, "Cu $", 15, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1);
AliMedium(16, "C $", 16, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1);
AliMedium(17, "PLOYCARB$", 17, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1);
// AliMedium(31, "Xenon $", 31, 1, 0, isxfld, sxmgmx, .1, .1, .1, .1);
// --- Generate explicitly delta rays in the iron, aluminium and lead ---
gMC->Gstpar(idtmed[600], "LOSS", 3.);
gMC->Gstpar(idtmed[600], "DRAY", 1.);
gMC->Gstpar(idtmed[603], "LOSS", 3.);
gMC->Gstpar(idtmed[603], "DRAY", 1.);
gMC->Gstpar(idtmed[604], "LOSS", 3.);
gMC->Gstpar(idtmed[604], "DRAY", 1.);
gMC->Gstpar(idtmed[605], "LOSS", 3.);
gMC->Gstpar(idtmed[605], "DRAY", 1.);
gMC->Gstpar(idtmed[606], "LOSS", 3.);
gMC->Gstpar(idtmed[606], "DRAY", 1.);
gMC->Gstpar(idtmed[607], "LOSS", 3.);
gMC->Gstpar(idtmed[607], "DRAY", 1.);
// --- Energy cut-offs in the Pb and Al to gain time in tracking ---
// --- without affecting the hit patterns ---
gMC->Gstpar(idtmed[600], "CUTGAM", 1e-4);
gMC->Gstpar(idtmed[600], "CUTELE", 1e-4);
gMC->Gstpar(idtmed[600], "CUTNEU", 1e-4);
gMC->Gstpar(idtmed[600], "CUTHAD", 1e-4);
gMC->Gstpar(idtmed[605], "CUTGAM", 1e-4);
gMC->Gstpar(idtmed[605], "CUTELE", 1e-4);
gMC->Gstpar(idtmed[605], "CUTNEU", 1e-4);
gMC->Gstpar(idtmed[605], "CUTHAD", 1e-4);
gMC->Gstpar(idtmed[606], "CUTGAM", 1e-4);
gMC->Gstpar(idtmed[606], "CUTELE", 1e-4);
gMC->Gstpar(idtmed[606], "CUTNEU", 1e-4);
gMC->Gstpar(idtmed[606], "CUTHAD", 1e-4);
gMC->Gstpar(idtmed[603], "CUTGAM", 1e-4);
gMC->Gstpar(idtmed[603], "CUTELE", 1e-4);
gMC->Gstpar(idtmed[603], "CUTNEU", 1e-4);
gMC->Gstpar(idtmed[603], "CUTHAD", 1e-4);
gMC->Gstpar(idtmed[609], "CUTGAM", 1e-4);
gMC->Gstpar(idtmed[609], "CUTELE", 1e-4);
gMC->Gstpar(idtmed[609], "CUTNEU", 1e-4);
gMC->Gstpar(idtmed[609], "CUTHAD", 1e-4);
// --- Prevent particles stopping in the gas due to energy cut-off ---
gMC->Gstpar(idtmed[604], "CUTGAM", 1e-5);
gMC->Gstpar(idtmed[604], "CUTELE", 1e-5);
gMC->Gstpar(idtmed[604], "CUTNEU", 1e-5);
gMC->Gstpar(idtmed[604], "CUTHAD", 1e-5);
gMC->Gstpar(idtmed[604], "CUTMUO", 1e-5);
}
//_____________________________________________________________________________
void AliPMDv1::Init()
{
//
// Initialises PMD detector after it has been built
//
Int_t i;
kdet=1;
//
printf("\n");
for(i=0;i<35;i++) printf("*");
printf(" PMD_INIT ");
for(i=0;i<35;i++) printf("*");
printf("\n");
printf(" PMD simulation package (v1) initialised\n");
printf(" parameters of pmd\n");
printf("%6d %10.2f %10.2f %10.2f %10.2f %10.2f\n",kdet,thmin,thmax,zdist,thlow,thhigh);
//
for(i=0;i<80;i++) printf("*");
printf("\n");
//
Int_t *idtmed = fIdtmed->GetArray()-599;
fMedSens=idtmed[605-1];
}
//_____________________________________________________________________________
void AliPMDv1::StepManager()
{
//
// Called at each step in the PMD
//
Int_t copy;
Float_t hits[4], destep;
Float_t center[3] = {0,0,0};
Int_t vol[5];
// char *namep;
if(gMC->GetMedium() == fMedSens && (destep = gMC->Edep())) {
gMC->CurrentVolID(copy);
// namep=gMC->CurrentVolName();
// printf("Current vol is %s \n",namep);
vol[0]=copy;
gMC->CurrentVolOffID(1,copy);
// namep=gMC->CurrentVolOffName(1);
// printf("Current vol 11 is %s \n",namep);
vol[1]=copy;
gMC->CurrentVolOffID(2,copy);
// namep=gMC->CurrentVolOffName(2);
// printf("Current vol 22 is %s \n",namep);
vol[2]=copy;
// if(strncmp(namep,"DW11",4))vol[2]=1;
gMC->CurrentVolOffID(3,copy);
// namep=gMC->CurrentVolOffName(3);
// printf("Current vol 33 is %s \n",namep);
vol[3]=copy;
gMC->CurrentVolOffID(4,copy);
// namep=gMC->CurrentVolOffName(4);
// printf("Current vol 44 is %s \n",namep);
vol[4]=copy;
// printf("volume number %d,%d,%d,%d,%d \n",vol[0],vol[1],vol[2],vol[3],vol[4]);
gMC->Gdtom(center,hits,1);
hits[3] = destep*1e9; //Number in eV
AddHit(gAlice->CurrentTrack(), vol, hits);
}
}