// // General task to match two sets of jets // // This task takes two TClonesArray's as input: // [1] fSourceJets - e.g. pythia jets // [2] fTargetJets - e.g. a samle containing pythia jets embedded in a pbpb event // the task will try to match jets from the source array to the target array, and // save the found TARGET jets in a new array 'fMatchedJets' // // matching is done in three steps // [1] geometric matching, where jets are matched by R = sqrt(dphi*dphi-deta*deta) or directly via dphi and deta // [2] optional injection / bijection check // in this check, it is made sure that fSourceJets -> fMatchedJets is either an injective non-surjective // or bijective map, depending on the matching resolution which is chosen for step [1] // so that each source jet has a unique target and vice-versa. // if R (or dphi, deta) are proportional to, or larger than, the jet radius, matching tends to be // bijective (each source has a target), if R is chosen to be very small, source jets might be lost // as no target can be found. // the mapping is done in such a way that each target is matched to its closest source and each source // is mapped to its closest target // [3] constituent matching // - how many constituents of the source jet are present in the matched jet? // a cut on the constituent fraction can be performed (not recommended) // - how much of the original pt is recovered in the matched jet? // a cut on the fraction of recovered / original pt can be performed (recommended) // // Author: Redmer Alexander Bertens, Utrecht Univeristy, Utrecht, Netherlands // rbertens@cern.ch, rbertens@nikhef.nl, r.a.bertens@uu.nl // root includes #include #include #include #include #include #include #include #include // aliroot includes #include #include #include #include #include // emcal jet framework includes #include #include #include class AliAnalysisTaskJetMatching; using namespace std; ClassImp(AliAnalysisTaskJetMatching) AliAnalysisTaskJetMatching::AliAnalysisTaskJetMatching() : AliAnalysisTaskEmcalJetDev("AliAnalysisTaskJetMatching", kTRUE), fDebug(0), fSourceJets(0), fSourceJetsName(0), fTargetJets(0), fTargetJetsName(0), fMatchedJets(0), fMatchedJetsName(GetName()), fSourceRho(0), fSourceRhoName(0), fTargetRho(0), fTargetRhoName(0), fUseScaledRho(0), fSourceRadius(0.3), fTargetRadius(0.3), fMatchingScheme(kGeoEtaPhi), fUseEmcalBaseJetCuts(kFALSE), fSourceBKG(kNoSourceBKG), fTargetBKG(kNoTargetBKG), fOutputList(0), fHistUnsortedCorrelation(0), fHistMatchedCorrelation(0), fHistSourceJetPt(0), fHistTargetJetPt(0), fHistMatchedJetPt(0), fHistNoConstSourceJet(0), fHistNoConstTargetJet(0), fHistNoConstMatchJet(0), fProfFracPtMatched(0), fProfFracPtJets(0), fProfFracNoMatched(0), fProfFracNoJets(0), fHistAnalysisSummary(0), fProfQAMatched(0), fProfQA(0), fNoMatchedJets(100), fMatchEta(.3), fMatchPhi(.3), fMatchR(.08), fMatchConstituents(kTRUE), fMinFracRecoveredConstituents(.5), fMinFracRecoveredConstituentPt(0.5), fGetBijection(kTRUE) { // default constructor ClearMatchedJetsCache(); } //_____________________________________________________________________________ AliAnalysisTaskJetMatching::AliAnalysisTaskJetMatching(const char* name) : AliAnalysisTaskEmcalJetDev(name, kTRUE), fDebug(0), fSourceJets(0), fSourceJetsName(0), fTargetJets(0), fTargetJetsName(0), fMatchedJets(0), fMatchedJetsName(GetName()), fSourceRho(0), fSourceRhoName(0), fTargetRho(0), fTargetRhoName(0), fUseScaledRho(0), fSourceRadius(0.3), fTargetRadius(0.3), fMatchingScheme(kGeoEtaPhi), fUseEmcalBaseJetCuts(kFALSE), fSourceBKG(kNoSourceBKG), fTargetBKG(kNoTargetBKG), fOutputList(0), fHistUnsortedCorrelation(0), fHistMatchedCorrelation(0), fHistSourceJetPt(0), fHistTargetJetPt(0), fHistMatchedJetPt(0), fHistNoConstSourceJet(0), fHistNoConstTargetJet(0), fHistNoConstMatchJet(0), fProfFracPtMatched(0), fProfFracPtJets(0), fProfFracNoMatched(0), fProfFracNoJets(0), fHistAnalysisSummary(0), fProfQAMatched(0), fProfQA(0), fNoMatchedJets(100), fMatchEta(.3), fMatchPhi(.3), fMatchR(.08), fMatchConstituents(kTRUE), fMinFracRecoveredConstituents(0.5), fMinFracRecoveredConstituentPt(0.5), fGetBijection(kTRUE) { // constructor ClearMatchedJetsCache(); DefineInput(0, TChain::Class()); DefineOutput(1, TList::Class()); } //_____________________________________________________________________________ AliAnalysisTaskJetMatching::~AliAnalysisTaskJetMatching() { // destructor if(fOutputList) delete fOutputList; } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::ExecOnce() { // initialize the anaysis if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); // get the stand alone jets from the input event fSourceJets = dynamic_cast(InputEvent()->FindListObject(fSourceJetsName.Data())); if(!fSourceJets) AliFatal(Form("%s: Container with name %s not found. Aborting", GetName(), fSourceJetsName.Data())); fTargetJets = dynamic_cast(InputEvent()->FindListObject(fTargetJetsName.Data())); if(!fTargetJets) AliFatal(Form("%s: Container with name %s not found. Aborting", GetName(), fSourceJetsName.Data())); // append the list of matched jets to the event fMatchedJets->Delete(); if (!(InputEvent()->FindListObject(fMatchedJetsName))) InputEvent()->AddObject(fMatchedJets); else AliFatal(Form("%s: Object with name %s already in event! Aborting", GetName(), fMatchedJetsName.Data())); FillAnalysisSummaryHistogram(); switch (fSourceBKG) { case kSourceLocalRho : { fSourceRho = dynamic_cast(InputEvent()->FindListObject(fSourceRhoName)); if(!fSourceRho) AliFatal(Form("%s: Object with name %s requested but not found! Aborting", GetName(), fSourceRhoName.Data())); } break; default : break; } switch (fTargetBKG) { case kTargetLocalRho : { fTargetRho = dynamic_cast(InputEvent()->FindListObject(fTargetRhoName)); if(!fTargetRho) AliFatal(Form("%s: Object with name %s requested but not found! Aborting", GetName(), fTargetRhoName.Data())); } break; default : break; } AliAnalysisTaskEmcalJetDev::ExecOnce(); // init base class } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::UserCreateOutputObjects() { // create output objects if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); // add the matched jets array to the event fMatchedJets = new TClonesArray("AliEmcalJet"); fMatchedJets->SetName(fMatchedJetsName); fOutputList = new TList(); fOutputList->SetOwner(kTRUE); // add analysis histograms fHistUnsortedCorrelation = BookTH1F("fHistUnsortedCorrelation", "#Delta #varphi unsorted", 50, 0, TMath::Pi()); fHistMatchedCorrelation = BookTH1F("fHistMatchedCorrelation", "#Delta #varphi matched", 50, 0, TMath::Pi()); fHistSourceJetPt = BookTH1F("fHistSourceJetPt", "p_{t} [GeV/c]", 50, 0, 150); fHistTargetJetPt = BookTH1F("fHistTargetJetPt", "p_{t} [GeV/c]", 50, 0, 150); fHistMatchedJetPt = BookTH1F("fHistMatchedJetPt", "p_{t} [GeV/c]", 50, 0, 150); fHistNoConstSourceJet = BookTH1F("fHistNoConstSourceJet", "number of constituents", 50, 0, 50); fHistNoConstTargetJet = BookTH1F("fHistNoConstTargetJet", "number of constituents", 50, 0, 50); fHistNoConstMatchJet = BookTH1F("fHistNoConstMatchJet", "number of constituents", 50, 0, 50); // the analysis summary histo which stores all the analysis flags is always written to file fHistAnalysisSummary = BookTH1F("fHistAnalysisSummary", "flag", 51, -0.5, 15.5); fProfQAMatched = new TProfile("fProfQAMatched", "fProfQAMatched", 3, 0, 3); fProfQAMatched->GetXaxis()->SetBinLabel(1, "<#delta p_{t} >"); fProfQAMatched->GetXaxis()->SetBinLabel(2, "<#delta #eta>"); fProfQAMatched->GetXaxis()->SetBinLabel(3, "<#delta #varphi>"); fOutputList->Add(fProfQAMatched); fProfQA = new TProfile("fProfQA", "fProfQA", 3, 0, 3); fProfQA->GetXaxis()->SetBinLabel(1, "<#delta p_{t} >"); fProfQA->GetXaxis()->SetBinLabel(2, "<#delta #eta>"); fProfQA->GetXaxis()->SetBinLabel(3, "<#delta #varphi>"); fOutputList->Add(fProfQA); fProfFracPtMatched = new TProfile("fProfFracPtMatched", "fProfFracPtMatched", 10, 0, 200); fOutputList->Add(fProfFracPtMatched); fProfFracPtJets = new TProfile("fProfFracPtJets", "fProfFracPtJets", 10, 0, 200); fOutputList->Add(fProfFracPtJets); fProfFracNoMatched = new TProfile("fProfFracNoMatched", "fProfFracNoMatched", 10, 0, 200); fOutputList->Add(fProfFracNoMatched); fProfFracNoJets = new TProfile("fProfFracNoJets", "fProfFracNoJets", 10, 0, 200); fOutputList->Add(fProfFracNoJets); fOutputList->Sort(); PostData(1, fOutputList); } //_____________________________________________________________________________ TH1F* AliAnalysisTaskJetMatching::BookTH1F(const char* name, const char* x, Int_t bins, Double_t min, Double_t max, Bool_t append) { // book a TH1F and connect it to the output container if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); if(!fOutputList) return 0x0; TString title(name); title += Form(";%s;[counts]", x); TH1F* histogram = new TH1F(name, title.Data(), bins, min, max); histogram->Sumw2(); if(append) fOutputList->Add(histogram); return histogram; } //_____________________________________________________________________________ TH2F* AliAnalysisTaskJetMatching::BookTH2F(const char* name, const char* x, const char*y, Int_t binsx, Double_t minx, Double_t maxx, Int_t binsy, Double_t miny, Double_t maxy, Bool_t append) { // book a TH2F and connect it to the output container if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); if(!fOutputList) return 0x0; TString title(name); title += Form(";%s;%s", x, y); TH2F* histogram = new TH2F(name, title.Data(), binsx, minx, maxx, binsy, miny, maxy); histogram->Sumw2(); if(append) fOutputList->Add(histogram); return histogram; } //_____________________________________________________________________________ Bool_t AliAnalysisTaskJetMatching::Run() { // execute once for each event if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); if(!(InputEvent() && fSourceJetsName && fTargetJets && IsEventSelected())) return kFALSE; // step one: do geometric matching switch (fMatchingScheme) { case kGeoEtaPhi : { DoGeometricMatchingEtaPhi(); } break; case kGeoR : { DoGeometricMatchingR(); } break; default : break; } // break if no jet was matched if(!fMatchedJetContainer[1][0]) return kTRUE; // optional step two: get a bijection (avoid duplicate matches) if(fGetBijection) GetBijection(); // optional step three: match constituents within matched jets if(fMatchConstituents) DoConstituentMatching(); // stream data to output PostMatchedJets(); FillMatchedJetHistograms(); if(fDebug > 0) PrintInfo(); PostData(1, fOutputList); return kTRUE; } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::DoGeometricMatchingEtaPhi() { // do geometric matching based on eta phi distance between jet centers if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); fNoMatchedJets = 0; // reset the matched jet counter Int_t iSource(fSourceJets->GetEntriesFast()), iTarget(fTargetJets->GetEntriesFast()); for(Int_t i(0); i < iSource; i++) { AliEmcalJet* sourceJet(static_cast(fSourceJets->At(i))); if(!PassesCuts(sourceJet)) continue; if(fUseEmcalBaseJetCuts && !AcceptJet(sourceJet, 0)) continue; for(Int_t j(0); j < iTarget; j++) { AliEmcalJet* targetJet(static_cast(fTargetJets->At(j))); if(!PassesCuts(targetJet)) continue; if (fUseEmcalBaseJetCuts && !AcceptJet(targetJet, 1)) continue; if((TMath::Abs(sourceJet->Eta() - targetJet->Eta()) < fMatchEta )) { Double_t sourcePhi(sourceJet->Phi()), targetPhi(targetJet->Phi()); if(TMath::Abs(sourcePhi-targetPhi) > TMath::Abs(sourcePhi-targetPhi+TMath::TwoPi())) sourcePhi+=TMath::TwoPi(); if(TMath::Abs(sourcePhi-targetPhi) > TMath::Abs(sourcePhi-targetPhi-TMath::TwoPi())) sourcePhi-=TMath::TwoPi(); if(TMath::Abs(sourcePhi-targetPhi) < fMatchPhi) { // accept the jets as matching Bool_t isBestMatch(kTRUE); if(fGetBijection) { // match has been found, for bijection only store it if there's no better match if(fDebug > 0) printf(" > Entering first bbijection test \n"); for(Int_t k(i); k < iSource; k++) { AliEmcalJet* candidateSourceJet(static_cast(fSourceJets->At(k))); if(!PassesCuts(candidateSourceJet)) continue; if(fUseEmcalBaseJetCuts && !AcceptJet(candidateSourceJet, 0)) continue; if(fDebug > 0) printf("source distance %.2f \t candidate distance %.2f \n", GetR(sourceJet, targetJet),GetR(candidateSourceJet, targetJet)); if(GetR(sourceJet, targetJet) > GetR(candidateSourceJet, targetJet)) { isBestMatch = kFALSE; break; } } if(fDebug > 0) (isBestMatch) ? printf(" kept source \n ") : printf(" we can do better (rejected source) \n"); } if(isBestMatch) { fMatchedJetContainer[fNoMatchedJets][0] = sourceJet; fMatchedJetContainer[fNoMatchedJets][1] = targetJet; fNoMatchedJets++; } if(fNoMatchedJets > 99) { // maximum to keep the cache at reasonable size AliError(Form("%s: Found too many matched jets (> 100). Adjust matching criteria !", GetName())); return; } } } } } } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::DoGeometricMatchingR() { // do geometric matching based on shortest path between jet centers if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); fNoMatchedJets = 0; // reset the matched jet counter Int_t iSource(fSourceJets->GetEntriesFast()), iTarget(fTargetJets->GetEntriesFast()); for(Int_t i(0); i < iSource; i++) { AliEmcalJet* sourceJet(static_cast(fSourceJets->At(i))); if(!PassesCuts(sourceJet)) continue; else if (fUseEmcalBaseJetCuts && !AcceptJet(sourceJet, 0)) continue; for(Int_t j(0); j < iTarget; j++) { AliEmcalJet* targetJet(static_cast(fTargetJets->At(j))); if(!PassesCuts(targetJet)) continue; else if (fUseEmcalBaseJetCuts && !AcceptJet(targetJet, 1)) continue; if(GetR(sourceJet, targetJet) <= fMatchR) { Bool_t isBestMatch(kTRUE); if(fGetBijection) { // match has been found, for bijection only store it if there's no better match if(fDebug > 0) printf(" > Entering first bijection test \n"); for(Int_t k(i); k < iSource; k++) { AliEmcalJet* candidateSourceJet(static_cast(fSourceJets->At(k))); if(!PassesCuts(candidateSourceJet)) continue; if(fUseEmcalBaseJetCuts && !AcceptJet(candidateSourceJet, 0)) continue; if(fDebug > 0) printf("source distance %.2f \t candidate distance %.2f \n", GetR(sourceJet, targetJet),GetR(candidateSourceJet, targetJet)); if(GetR(sourceJet, targetJet) > GetR(candidateSourceJet, targetJet)) { isBestMatch = kFALSE; break; } } if(fDebug > 0) (isBestMatch) ? printf(" kept source \n ") : printf(" we can do better (rejected source) \n"); } if(isBestMatch) { fMatchedJetContainer[fNoMatchedJets][0] = sourceJet; fMatchedJetContainer[fNoMatchedJets][1] = targetJet; fNoMatchedJets++; } if(fNoMatchedJets > 99) { AliError(Form("%s: Found too many matched jets (> 100). Adjust matching criteria !", GetName())); return; } } } } } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::DoConstituentMatching() { // match constituents within matched jets if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); if(!fTracks) { AliFatal(Form("%s Fatal error! To do deep matching, supply jet constituents ! \n", GetName())); return; // coverity ... } for(Int_t i(0); i < fNoMatchedJets; i++) { AliEmcalJet* sourceJet = fMatchedJetContainer[i][0]; AliEmcalJet* targetJet = fMatchedJetContainer[i][1]; if(sourceJet && targetJet) { // duplicate check: slot migth be NULL Double_t targetPt(0); Int_t iSJ(sourceJet->GetNumberOfTracks()); Int_t iTJ(targetJet->GetNumberOfTracks()); Int_t overlap(0), alreadyFound(0); for(Int_t j(0); j < iSJ; j++) { alreadyFound = 0; Int_t idSource((Int_t)sourceJet->TrackAt(j)); for(Int_t k(0); k < iTJ; k++) { // compare all target tracks to the source track if(idSource == targetJet->TrackAt(k) && alreadyFound == 0) { overlap++; alreadyFound++; // avoid possible duplicate matching AliVParticle* vp(static_cast(targetJet->TrackAt(k, fTracks))); if(vp) targetPt += vp->Pt(); continue; } } } if((float)overlap/(float)iSJ < fMinFracRecoveredConstituents || targetPt/sourceJet->Pt() < fMinFracRecoveredConstituentPt) { if(fDebug > 0) printf(" \n > Purging jet, recovered constituents ratio %i / %i = %.2f < or pt ratio %.2f / %.2f = %.2f < %.2f", overlap, iSJ, (float)overlap/(float)iSJ, targetPt, sourceJet->Pt(), targetPt/sourceJet->Pt(), fMinFracRecoveredConstituentPt); fMatchedJetContainer[i][0] = 0x0; fMatchedJetContainer[i][1] = 0x0; continue; } if(sourceJet->Pt() > 0) { Double_t sourceRho(0), targetRho(0); if(fSourceRho) sourceRho = fSourceRho->GetLocalVal(sourceJet->Phi(), fSourceRadius)*sourceJet->Area(); if(fTargetRho) targetRho = fTargetRho->GetLocalVal(targetJet->Phi(), fTargetRadius)*targetJet->Area(); fProfFracPtMatched->Fill(sourceJet->Pt()-sourceRho, (targetPt-targetRho) / (sourceJet->Pt()-sourceRho)); fProfFracPtJets->Fill(sourceJet->Pt()-sourceRho, (targetJet->Pt()-targetRho) / (sourceJet->Pt()-sourceRho)); fProfFracNoMatched->Fill(sourceJet->Pt()-sourceRho, (double)overlap / (double)sourceJet->GetNumberOfTracks()); fProfFracNoJets->Fill(sourceJet->Pt()-sourceRho, (double)targetJet->GetNumberOfTracks() / (double)sourceJet->GetNumberOfTracks()); } if(fDebug > 0) { printf("\n > Jet A: %i const\t", iSJ); printf(" > Jet B %i const\t", iTJ); printf(" -> OVERLAP: %i tracks <- \n", overlap); } } } } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::GetBijection() { // bijection of source and matched jets, based on closest distance between jets if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); for(Int_t i(0); i < fNoMatchedJets; i++) { for(Int_t j(i+1); j < fNoMatchedJets; j++) { if(fMatchedJetContainer[i][0] == fMatchedJetContainer[j][0]) { // found source with two targets, now see which target is closer to the source if(!(fMatchedJetContainer[i][0] && fMatchedJetContainer[i][1] && fMatchedJetContainer[j][0] && fMatchedJetContainer[j][1] )) continue; Double_t rA(GetR(fMatchedJetContainer[i][0], fMatchedJetContainer[i][1])); // distance between connection A = i Double_t rB(GetR(fMatchedJetContainer[j][0], fMatchedJetContainer[j][1])); // distance between connection B = j if (rB > rA) { // jet two is far away, clear it from both target and source list fMatchedJetContainer[j][0] = 0x0; fMatchedJetContainer[j][1] = 0x0; } else { // jet one is far away, clear it from both target and source list fMatchedJetContainer[i][0] = fMatchedJetContainer[j][0]; // switch to avoid breaking loop fMatchedJetContainer[i][1] = fMatchedJetContainer[j][1]; fMatchedJetContainer[j][0] = 0x0; // clear duplicate jet from cache fMatchedJetContainer[j][1] = 0x0; } if(fDebug > 0) printf(" found duplicate jet, chose %.2f over %.2f \n" , (rB > rA) ? rA : rB, (rB > rA) ? rB : rA); } } } } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::PostMatchedJets() { // post matched jets if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); for(Int_t i(0), p(0); i < fNoMatchedJets; i++) { if(fMatchedJetContainer[i][1]) { // duplicate jets will have NULL value here and are skipped new((*fMatchedJets)[p]) AliEmcalJet(*fMatchedJetContainer[i][1]); p++; } } } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::FillAnalysisSummaryHistogram() const { // fill the analysis summary histrogram, saves all relevant analysis settigns if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); fHistAnalysisSummary->GetXaxis()->SetBinLabel(1, "fUseScaledRho"); fHistAnalysisSummary->SetBinContent(1, (int)fUseScaledRho); fHistAnalysisSummary->GetXaxis()->SetBinLabel(2, "fMatchingScheme"); fHistAnalysisSummary->SetBinContent(2, (int)fMatchingScheme); fHistAnalysisSummary->GetXaxis()->SetBinLabel(3, "fSourceBKG"); fHistAnalysisSummary->SetBinContent(3, (int)fSourceBKG); fHistAnalysisSummary->GetXaxis()->SetBinLabel(4, "fTargetBKG"); fHistAnalysisSummary->SetBinContent(4, (int)fTargetBKG); fHistAnalysisSummary->GetXaxis()->SetBinLabel(5, "fMatchEta"); fHistAnalysisSummary->SetBinContent(5, fMatchEta); fHistAnalysisSummary->GetXaxis()->SetBinLabel(6, "fMatchPhi"); fHistAnalysisSummary->SetBinContent(6, fMatchPhi); fHistAnalysisSummary->GetXaxis()->SetBinLabel(7, "fMatchR"); fHistAnalysisSummary->SetBinContent(7, fMatchR); fHistAnalysisSummary->GetXaxis()->SetBinLabel(8, "iter"); fHistAnalysisSummary->SetBinContent(8, 1.); } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::FillMatchedJetHistograms() const { // fill matched jet histograms if(fDebug > 0) printf("__FILE__ = %s \n __LINE __ %i , __FUNC__ %s \n ", __FILE__, __LINE__, __func__); for(Int_t i(0); i < fSourceJets->GetEntriesFast(); i++) { AliEmcalJet* source = static_cast(fSourceJets->At(i)); if(!source) continue; Double_t sourceRho(0), targetRho(0); if(fSourceRho) sourceRho = fSourceRho->GetLocalVal(source->Phi(), fSourceRadius)*source->Area(); fHistSourceJetPt->Fill(source->Pt()-sourceRho); fHistNoConstSourceJet->Fill(source->GetNumberOfConstituents()); for(Int_t j(0); j < fTargetJets->GetEntriesFast(); j++) { AliEmcalJet* target = static_cast(fTargetJets->At(j)); if(target) { if(fTargetRho) targetRho = fTargetRho->GetLocalVal(target->Phi(), fTargetRadius)*target->Area(); fProfQA->Fill(0.5, TMath::Abs((source->Pt()-sourceRho)-(target->Pt()-targetRho))); fProfQA->Fill(1.5, TMath::Abs(source->Eta()-target->Eta())); fProfQA->Fill(2.5, TMath::Abs(source->Phi()-target->Phi())); fHistUnsortedCorrelation->Fill(PhaseShift(source->Phi()-target->Phi(), 2)); if(j==0) { fHistTargetJetPt->Fill(target->Pt()-targetRho); fHistNoConstTargetJet->Fill(target->GetNumberOfConstituents()); } } } } for(Int_t i(0); i < fNoMatchedJets; i++) { if(fMatchedJetContainer[i][0] && fMatchedJetContainer[i][1]) { Double_t sourceRho(0), targetRho(0); if(fSourceRho) sourceRho = fSourceRho->GetLocalVal(fMatchedJetContainer[i][0]->Phi(), fSourceRadius)*fMatchedJetContainer[i][0]->Area(); if(fTargetRho) targetRho = fSourceRho->GetLocalVal(fMatchedJetContainer[i][1]->Phi(), fTargetRadius)*fMatchedJetContainer[i][1]->Area(); fHistMatchedCorrelation->Fill(PhaseShift(fMatchedJetContainer[i][0]->Phi()-fMatchedJetContainer[i][1]->Phi(), 2)); fHistMatchedJetPt->Fill(fMatchedJetContainer[i][1]->Pt()-targetRho); fHistNoConstMatchJet->Fill(fMatchedJetContainer[i][1]->Pt()-targetRho); fProfQAMatched->Fill(0.5, TMath::Abs((fMatchedJetContainer[i][0]->Pt()-sourceRho)-(fMatchedJetContainer[i][1]->Pt()-targetRho))); fProfQAMatched->Fill(1.5, TMath::Abs(fMatchedJetContainer[i][0]->Eta()-fMatchedJetContainer[i][1]->Eta())); fProfQAMatched->Fill(2.5, TMath::Abs(fMatchedJetContainer[i][0]->Phi()-fMatchedJetContainer[i][1]->Phi())); } } } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::PrintInfo() const { // print some info printf("\n > No. of source jets from %s \n \t %i \n ", fSourceJetsName.Data(), fSourceJets->GetEntriesFast()); printf(" > No. of target jets from %s \n \t %i \n ", fTargetJetsName.Data(), fTargetJets->GetEntriesFast()); printf(" > No. of matched jets from %s \n \t %i \n ", fMatchedJetsName.Data(), fMatchedJets->GetEntriesFast()); if(fDebug > 3) InputEvent()->GetList()->ls(); } //_____________________________________________________________________________ void AliAnalysisTaskJetMatching::Terminate(Option_t *) { // terminate } //_____________________________________________________________________________