///////////////////////////////////////////////////////////////////////////////
// //
// Magnetic Dipole version 1 //
// //
//Begin_Html
/*
The responsible person for this module is
Andreas Morsch.
*/
//End_Html
// //
// //
///////////////////////////////////////////////////////////////////////////////
#include "AliDIPOv2.h"
#include "AliRun.h"
#include "AliConst.h"
ClassImp(AliDIPOv2)
//_____________________________________________________________________________
AliDIPOv2::AliDIPOv2()
{
//
// Default constructor for magnetic dipole version 2
//
}
//_____________________________________________________________________________
AliDIPOv2::AliDIPOv2(const char *name, const char *title)
: AliDIPO(name,title)
{
//
// Standard constructor for the magnetic dipole version 2
SetMarkerColor(7);
SetMarkerStyle(2);
SetMarkerSize(0.4);
}
//_____________________________________________________________________________
void AliDIPOv2::CreateGeometry()
{
//
// Creation of the geometry of the magnetic DIPOLE version 2
//
//Begin_Html
/*
*/
//End_Html
//Begin_Html
/*
*/
//End_Html
AliMC* pMC = AliMC::GetMC();
Float_t cpar[5], tpar[3], ypar[4];
Float_t dz, dx, dy;
Int_t idrotm[1899];
Float_t acc_max, the1, phi1, the2, phi2, the3, phi3;
Int_t *idtmed = gAlice->Idtmed();
//abs_d = 90.; // DEFINES DRIFT LENGTH
//z_nose = 102.;
//z_cone = 285.;
//theta1 = 24.; // 1. angle defining the front absorber
//theta2 = 5.; // 2. angle defining the front absorbe
acc_max = 9.; // ANGLE POLAIRE MAXIMUM
//acc_min = 2.; // ANGLE POLAIRE MINIMUM DE DETECTION
//abs_l = 503.;
//d_steel = 1.; // THICKNESS OF STEEL SUPPORT
//d_poly = 7.5;
//d_pb = 2.5;
//abs_cc = 315.; // DEFINES LENGTH OF CARBON
//abs_c = 358.;
//abs_s = 150.; // DEFINES W-SHIELD LENGTH
//abs_n = 80.; // START OF NOSE
//r_abs = 4.;
//r_pb = .1;
//epsilon = .01;
//theta_r = 3.;
//d_rear = 35.;
//theta_open = .75;
//z_l3 = 700.;
//zmag_in = 725.;
//zmag_out = 1225.;
//zfil_in = 1471.;
//zfil_out = 1591.;
//zcon_in = 1900.;
//zcon_out = 2e3;
//zcone_e = 859.0875;
//spec_l = 1800.;
//zplug_in = 1780.;
//zplug_out = 1900.;
// Chamber position
// CZ1=515.5
//cz1 = 511.;
//cz2 = 686.;
//cz3 = 971.;
//cz4 = 1245.;
//cz5 = 1445.;
//cz6 = 1610.;
//cz7 = 1710.;
// DIPOLE MAGNET
tpar[0] = 300.;
tpar[1] = 415.;
tpar[2] = 250.;
pMC->Gsvolu("DDIP", "BOX ", idtmed[1814], tpar, 3);
// COILS
// air - m.f.
cpar[0] = 210.;
cpar[1] = 263.;
cpar[2] = 83.2/2.;
cpar[3] = 120.;
cpar[4] = 240.;
pMC->Gsvolu("DC1 ", "TUBS", idtmed[1813], cpar, 5);
cpar[3] = -60.;
cpar[4] = 60.;
pMC->Gsvolu("DC2 ", "TUBS", idtmed[1813], cpar, 5);
// ... define regions for higher cuts
cpar[0] += 10.;
cpar[1] += -10.;
cpar[2] += -10.;
cpar[3] = 120.;
cpar[4] = 240.;
pMC->Gsvolu("DC3 ", "TUBS", idtmed[1833], cpar, 5);
pMC->Gspos("DC3 ", 1, "DC1 ", 0., 0., 0., 0, "ONLY");
cpar[3] = -60.;
cpar[4] = 60.;
pMC->Gsvolu("DC4 ", "TUBS", idtmed[1833], cpar, 5);
pMC->Gspos("DC4 ", 1, "DC2 ", 0., 0., 0., 0, "ONLY");
// ...
dz = 83.2/2. - 250.;
pMC->Gspos("DC1 ", 1, "DDIP", 0., 0., dz, 0, "ONLY");
pMC->Gspos("DC1 ", 2, "DDIP", 0., 0., -dz, 0, "ONLY");
pMC->Gspos("DC2 ", 1, "DDIP", 0., 0., dz, 0, "ONLY");
pMC->Gspos("DC2 ", 2, "DDIP", 0., 0., -dz, 0, "ONLY");
the1 = 180.;
phi1 = 0.;
the2 = 90.;
phi2 = 150.;
the3 = 90.;
phi3 = 60.;
AliMatrix(idrotm[1800], the1, phi1, the2, phi2, the3, phi3);
phi2 = 30.;
the3 = -90.;
phi3 = -60.;
AliMatrix(idrotm[1801], the1, phi1, the2, phi2, the3, phi3);
the1 = 0.;
phi1 = 0.;
the2 = 90.;
phi2 = 150.;
the3 = 90.;
phi3 = 60.;
AliMatrix(idrotm[1802], the1, phi1, the2, phi2, the3, phi3);
phi2 = 30.;
the3 = -90.;
phi3 = -60.;
AliMatrix(idrotm[1803], the1, phi1, the2, phi2, the3, phi3);
cpar[0] = 25.;
cpar[1] = 108.2;
cpar[2] = 26.5;
cpar[3] = 270.;
cpar[4] = 360.;
pMC->Gsvolu("DC11", "TUBS", idtmed[1813], cpar, 5);
// ... higher cuts
cpar[0] += 10.;
cpar[1] += -10.;
cpar[2] += -10.;
pMC->Gsvolu("DC21", "TUBS", idtmed[1833], cpar, 5);
pMC->Gspos("DC21", 1, "DC11", 0., 0., 0., 0, "ONLY");
// ...
dx = TMath::Sin(30*kDegrad) * -236.5;
dy = TMath::Cos(30*kDegrad) * -236.5;
dz = cpar[1] + 10. - 250.;
pMC->Gspos("DC11", 1, "DDIP", dx, dy, dz, idrotm[1800], "ONLY");
pMC->Gspos("DC11", 2, "DDIP", dx, dy, -dz, idrotm[1802], "ONLY");
pMC->Gspos("DC11", 3, "DDIP", -dx, dy, dz, idrotm[1801], "ONLY");
pMC->Gspos("DC11", 4, "DDIP", -dx, dy, -dz, idrotm[1803], "ONLY");
cpar[0] = 25.;
cpar[1] = 25.+83.2;
cpar[2] = 53./2.;
cpar[3] = 0.;
cpar[4] = 90.;
pMC->Gsvolu("DC12", "TUBS", idtmed[1813], cpar, 5);
// ... higher cuts
cpar[0] += 10.;
cpar[1] += -10.;
cpar[2] += -10.;
pMC->Gsvolu("DC22", "TUBS", idtmed[1833], cpar, 5);
pMC->Gspos("DC22", 1, "DC12", 0., 0., 0., 0, "ONLY");
// ...
dx = TMath::Sin(30*kDegrad) * -236.5;
dy = TMath::Cos(30*kDegrad) * 236.5;
dz = cpar[1] + 10. - 250.;
pMC->Gspos("DC12", 1, "DDIP", dx, dy, dz, idrotm[1801], "ONLY");
pMC->Gspos("DC12", 2, "DDIP", dx, dy, -dz, idrotm[1803], "ONLY");
pMC->Gspos("DC12", 3, "DDIP", -dx, dy, dz, idrotm[1800], "ONLY");
pMC->Gspos("DC12", 4, "DDIP", -dx, dy, -dz, idrotm[1802], "ONLY");
the1 = 90.;
phi1 = 60.;
the2 = 90.;
phi2 = 150.;
the3 = 0.;
phi3 = 0.;
AliMatrix(idrotm[1804], the1, phi1, the2, phi2, the3, phi3);
the1 = 90.;
phi1 = 120.;
the2 = 90.;
phi2 = 210.;
the3 = 0.;
phi3 = 0.;
AliMatrix(idrotm[1805], the1, phi1, the2, phi2, the3, phi3);
tpar[0] = 53./2.;
tpar[1] = 83.2/2.;
tpar[2] = 283.6/2.;
pMC->Gsvolu("DL1 ", "BOX ", idtmed[1813], tpar, 3);
// ... higher cuts
tpar[0] -= 10.;
tpar[1] -= 10.;
pMC->Gsvolu("DL2 ", "BOX ", idtmed[1833], tpar, 3);
pMC->Gspos("DL2 ", 1, "DL1 ", 0., 0., 0., 0, "ONLY");
// ...
dx = -60.5;
dy = -238.;
dz = 0.;
pMC->Gspos("DL1 ", 1, "DDIP", dx, dy, dz, idrotm[1804], "ONLY");
pMC->Gspos("DL1 ", 2, "DDIP", dx, -dy, dz, idrotm[1805], "ONLY");
pMC->Gspos("DL1 ", 3, "DDIP",-dx, dy, dz, idrotm[1805], "ONLY");
pMC->Gspos("DL1 ", 4, "DDIP",-dx, -dy, dz, idrotm[1804], "ONLY");
// YOKE
ypar[1] = 275.8;
ypar[2] = 5.;
ypar[3] = 156.8;
ypar[0] = ypar[1] - ypar[3] * 2. * TMath::Tan(acc_max * kDegrad);
pMC->Gsvolu("DY1 ", "TRD1", idtmed[1809], ypar, 4);
// iron -
dy = 283.5;
pMC->Gspos("DY1 ", 1, "DDIP", 0., dy, 0., 0, "ONLY");
pMC->Gspos("DY1 ", 2, "DDIP", 0., -dy, 0., 0, "ONLY");
ypar[2] = 60.;
pMC->Gsvolu("DY2 ", "TRD1", idtmed[1829], ypar, 4);
// iron -
dy = ypar[2] + 284.;
pMC->Gspos("DY2 ", 1, "DDIP", 0., dy, 0., 0, "ONLY");
pMC->Gspos("DY2 ", 2, "DDIP", 0., -dy, 0., 0, "ONLY");
the1 = 99.;
phi1 = 0.;
the2 = 90.;
phi2 = 90.;
the3 = 9.;
phi3 = 0.;
AliMatrix(idrotm[1806], the1, phi1, the2, phi2, the3, phi3);
the1 = 261.;
phi1 = 0.;
the3 = 171.;
AliMatrix(idrotm[1807], the1, phi1, the2, phi2, the3, phi3);
tpar[0] = 60.;
tpar[1] = 283.;
tpar[2] = 156.8;
pMC->Gsvolu("DYL ", "BOX ", idtmed[1814], tpar, 3);
tpar[0] = 5.;
tpar[1] = 73.;
pMC->Gsvolu("DY3 ", "BOX ", idtmed[1809], tpar, 3);
dx = tpar[0] - 60.;
dy = tpar[1] + 137.;
pMC->Gspos("DY3 ", 1, "DYL ", dx, dy, 0., 0, "ONLY");
pMC->Gspos("DY3 ", 2, "DYL ", dx, -dy, 0., 0, "ONLY");
tpar[0] = 55.;
pMC->Gsvolu("DY4 ", "BOX ", idtmed[1829], tpar, 3);
dx = dx + 5. + tpar[0];
pMC->Gspos("DY4 ", 1, "DYL ", dx, dy, 0., 0, "ONLY");
pMC->Gspos("DY4 ", 2, "DYL ", dx, -dy, 0., 0, "ONLY");
tpar[0] = 37.7;
tpar[1] = 137.;
pMC->Gsvolu("DY5 ", "BOX ", idtmed[1829], tpar, 3);
dx = 60. - tpar[0];
pMC->Gspos("DY5 ", 1, "DYL ", dx, 0., 0., 0, "ONLY");
tpar[0] = 5.;
pMC->Gsvolu("DY6 ", "BOX ", idtmed[1809], tpar, 3);
dx = dx - 37.7 - tpar[0];
pMC->Gspos("DY6 ", 1, "DYL ", dx, 0., 0., 0, "ONLY");
tpar[0] = 17.3;
tpar[1] = 5.;
pMC->Gsvolu("DY7 ", "BOX ", idtmed[1809], tpar, 3);
dx = tpar[0] - 60.;
dy = tpar[1] + 127.;
pMC->Gspos("DY7 ", 1, "DYL ", dx, dy, 0., 0, "ONLY");
pMC->Gspos("DY7 ", 2, "DYL ", dx, -dy, 0., 0, "ONLY");
dx = ypar[0] + ypar[3] * TMath::Tan(acc_max * kDegrad) - 60.;
pMC->Gspos("DYL ", 1, "DDIP", dx, 0., 0., idrotm[1806], "ONLY");
pMC->Gspos("DYL ", 2, "DDIP",-dx, 0., 0., idrotm[1807], "ONLY");
pMC->Gspos("DDIP", 1, "ALIC", 0., 0., 725.+250., 0, "MANY");
pMC->Gsatt("DDIP", "SEEN", 0);
pMC->Gsatt("DC21", "SEEN", 0);
pMC->Gsatt("DC22", "SEEN", 0);
pMC->Gsatt("DC3 ", "SEEN", 0);
pMC->Gsatt("DC4 ", "SEEN", 0);
}
//_____________________________________________________________________________
void AliDIPOv2::DrawModule()
{
//
// Draw a shaded view of the muon absorber
//
AliMC* pMC = AliMC::GetMC();
// Set everything unseen
pMC->Gsatt("*", "seen", -1);
//
// Set ALIC mother transparent
pMC->Gsatt("ALIC","SEEN",0);
//
// Set the volumes visible
pMC->Gsatt("DDIP","seen",0);
pMC->Gsatt("DC1 ","seen",1);
pMC->Gsatt("DC2 ","seen",1);
pMC->Gsatt("DC3 ","seen",1);
pMC->Gsatt("DC4 ","seen",1);
pMC->Gsatt("DC11","seen",1);
pMC->Gsatt("DC21","seen",1);
pMC->Gsatt("DC12","seen",1);
pMC->Gsatt("DC22","seen",1);
pMC->Gsatt("DL1 ","seen",1);
pMC->Gsatt("DL2 ","seen",1);
pMC->Gsatt("DY1 ","seen",1);
pMC->Gsatt("DY2 ","seen",1);
pMC->Gsatt("DYL ","seen",1);
pMC->Gsatt("DY3 ","seen",1);
pMC->Gsatt("DY4 ","seen",1);
pMC->Gsatt("DY5 ","seen",1);
pMC->Gsatt("DY6 ","seen",1);
pMC->Gsatt("DY7 ","seen",1);
//
pMC->Gdopt("hide", "on");
pMC->Gdopt("shad", "on");
pMC->Gsatt("*", "fill", 7);
pMC->SetClipBox(".");
pMC->SetClipBox(".");
pMC->DefaultRange();
pMC->Gdraw("alic", 30, 30, 0, 17, 13.5, .019, .019);
pMC->Gdhead(1111, "Magnetic Dipole Version 2");
pMC->Gdman(16, 4, "MAN");
}
//_____________________________________________________________________________
void AliDIPOv2::CreateMaterials()
{
//
// Create Materials for Magnetic Dipole version 2
//
Int_t ISXFLD = gAlice->Field()->Integ();
Float_t SXMGMX = gAlice->Field()->Max();
Float_t asteel[4] = { 55.847,51.9961,58.6934,28.0855 };
Float_t zsteel[4] = { 26.,24.,28.,14. };
Float_t wsteel[4] = { .715,.18,.1,.005 };
Float_t acoil[3] = { 26.98,1.01,16. };
Float_t zcoil[3] = { 13.,1.,8. };
Float_t wcoil[3] = { .66,.226,.114 };
Float_t epsil, stmin, deemax, tmaxfd, stemax;
// --- Define the various materials for GEANT ---
// Aluminum
AliMaterial(9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
AliMaterial(29, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
AliMaterial(49, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2);
// Iron
AliMaterial(10, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
AliMaterial(30, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
AliMaterial(50, "IRON$ ", 55.85, 26., 7.87, 1.76, 17.1);
// Air
AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
AliMaterial(35, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
AliMaterial(55, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500);
// Vacuum
AliMaterial(16, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
AliMaterial(36, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
AliMaterial(56, "VACUUM$ ", 1e-16, 1e-16, 1e-16, 1e16, 1e16);
// stainless Steel
AliMixture(19, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel);
AliMixture(39, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel);
AliMixture(59, "STAINLESS STEEL$", asteel, zsteel, 7.88, 4, wsteel);
// Coil
AliMixture(14, "Al$", acoil, zcoil, 2.122, 3, wcoil);
AliMixture(34, "Al$", acoil, zcoil, 2.122, 3, wcoil);
AliMixture(54, "Al$", acoil, zcoil, 2.122, 3, wcoil);
// ****************
// Defines tracking media parameters.
// Les valeurs sont commentees pour laisser le defaut
// a GEANT (version 3-21, page CONS200), f.m.
epsil = .001; // Tracking precision,
stemax = -1.; // Maximum displacement for multiple scat
tmaxfd = -20.; // Maximum angle due to field deflection
deemax = -.3; // Maximum fractional energy loss, DLS
stmin = -.8;
// ***************
// Aluminum
AliMedium(1809, "ALU_C0 ", 9, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1829, "ALU_C1 ", 29, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1849, "ALU_C2 ", 49, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
// Iron
AliMedium(1810, "FE_C0 ", 10, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1830, "FE_C1 ", 30, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1850, "FE_C2 ", 50, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
// Air
AliMedium(1815, "AIR_C0 ", 15, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1835, "AIR_C1 ", 35, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1855, "AIR_C2 ", 55, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
// Vacuum
AliMedium(1816, "VA_C0 ", 16, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1836, "VA_C1 ", 36, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1856, "VA_C2 ", 56, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
// Steel
AliMedium(1819, "ST_C0 ", 19, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1839, "ST_C1 ", 39, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1859, "ST_C3 ", 59, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
// Coil
AliMedium(1814, "Coil_C1 ", 14, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1834, "Coil_C2 ", 34, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
AliMedium(1854, "Coil_C3 ", 54, 0, ISXFLD, SXMGMX, tmaxfd, stemax, deemax, epsil, stmin);
}