/**************************************************************************
* Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
* *
* Author: The ALICE Off-line Project. *
* Contributors are mentioned in the code where appropriate. *
* *
* Permission to use, copy, modify and distribute this software and its *
* documentation strictly for non-commercial purposes is hereby granted *
* without fee, provided that the above copyright notice appears in all *
* copies and that both the copyright notice and this permission notice *
* appear in the supporting documentation. The authors make no claims *
* about the suitability of this software for any purpose. It is *
* provided "as is" without express or implied warranty. *
**************************************************************************/
/*
$Log$
Revision 1.18 1999/10/14 16:52:08 fca
Only use PDG codes and not GEANT ones
Revision 1.17 1999/10/08 06:27:23 fca
Corrected bug in the HV degrader geometry, thanks to G.Tabary
Revision 1.16 1999/10/04 13:39:54 fca
Correct array index problem
Revision 1.15 1999/09/29 09:24:34 fca
Introduction of the Copyright and cvs Log
*/
///////////////////////////////////////////////////////////////////////////////
// //
// Time Projection Chamber version 2 -- detailed TPC and slow simulation //
// //
//Begin_Html
/*
*/
//End_Html
// //
// //
///////////////////////////////////////////////////////////////////////////////
#include
#include
#include "AliTPCv2.h"
#include "AliTPCD.h"
#include "AliRun.h"
#include "AliConst.h"
#include "AliPDG.h"
ClassImp(AliTPCv2)
//_____________________________________________________________________________
AliTPCv2::AliTPCv2(const char *name, const char *title) :
AliTPC(name, title)
{
//
// Standard constructor for Time Projection Chamber version 2
//
fIdSens1=0;
fIdSens2=0;
SetBufferSize(128000);
}
//_____________________________________________________________________________
void AliTPCv2::CreateGeometry()
{
//
// Create the geometry of Time Projection Chamber version 2
//
//Begin_Html
/*
*/
//End_Html
//Begin_Html
/*
*/
//End_Html
AliTPCParam * fTPCParam = &(fDigParam->GetParam());
Int_t *idtmed = fIdtmed->GetArray();
Float_t dm[21];
Int_t idrotm[120];
Int_t nRotMat = 0;
Int_t i,ifl1,ifl2;
Int_t nInnerSector = fTPCParam->GetNInnerSector()/2;
Int_t nOuterSector = fTPCParam->GetNOuterSector()/2;
// ---------------------------------------------------
// sector specification check
// ---------------------------------------------------
if (fSecAL >= 0) {
ifl1 = 0;
for (i = 0; i < 6; ++i) {
if (fSecLows[i] >= 0 && fSecLows[i] < 2*nInnerSector) {
ifl1 = 1;
printf("*** SECTOR %d selected\n",fSecLows[i]);
}
}
} else {
printf("*** ALL LOWER SECTORS SELECTED ***\n");
ifl1 = 1;
}
if (fSecAU >= 0) {
ifl2 = 0;
for (i = 0; i < 12; ++i) {
if (fSecUps[i] > 2*nInnerSector-1 &&
fSecUps[i] < 2*(nInnerSector+nOuterSector)) {
ifl2 = 1;
printf("*** SECTOR %d selected\n",fSecUps[i]);
}
}
} else {
printf("*** ALL UPPER SECTORS SELECTED ***\n");
ifl1 = 1;
}
if (ifl1 == 0 && ifl2 == 0) {
printf("*** ERROR: AT LEAST ONE SECTOR MUST BE SPECIFIED ***\n");
printf("!!! PROGRAM STOPPED !!!\n");
exit(1);
}
if ((fSecAL < 0 || fSecAU < 0) && fSens >= 0) {
printf("** ERROR: STRIPS CANNOT BE SPECIFIED FOR ALL SECTORS **\n");
printf("!!! PROGRAM STOPPED !!!\n");
exit(1);
}
// ----------------------------------------------------
// FIELD CAGE WITH ENDCAPS - G10
// THIS IS ALSO A TPC MOTHER VOLUME
// ----------------------------------------------------
dm[0] = 76.;
dm[1] = 278.;
dm[2] = 275.;
gMC->Gsvolu("TPC ", "TUBE", idtmed[8], dm, 3);
//-----------------------------------------------------
// Endcap cover c-fibre 0.86% X0
//-----------------------------------------------------
dm[0] = 78.;
dm[1] = 258.;
dm[2] = 0.95;
gMC->Gsvolu("TPEC","TUBE",idtmed[10],dm,3);
//-----------------------------------------------------
// Drift gas , leave 2 cm at the outer radius
// and inner raddius
//-----------------------------------------------------
dm[0] = 78.;
dm[1] = 258.;
dm[2] = 250.;
gMC->Gsvolu("TGAS", "TUBE", idtmed[3], dm, 3);
//------------------------------------------------------
// membrane holder - carbon fiber
//------------------------------------------------------
gMC->Gsvolu("TPMH","TUBE",idtmed[6],dm,0);
dm[0] = 252.;
dm[1] = 258.;
dm[2] = 0.2;
gMC->Gsposp("TPMH",1,"TGAS",0.,0.,0.,0,"ONLY",dm,3);
dm[0] = 78.;
dm[1] = 82.;
dm[2] = 0.1;
gMC->Gsposp("TPMH",2,"TGAS",0.,0.,0.,0,"ONLY",dm,3);
//----------------------------------------------------------
// HV membrane - 25 microns of mylar
//----------------------------------------------------------
dm[0] = 82.;
dm[1] = 252.;
dm[2] = 0.00125;
gMC->Gsvolu("TPHV","TUBE",idtmed[5],dm,3);
gMC->Gspos("TPHV",1,"TGAS",0.,0.,0.,0,"ONLY");
gMC->Gspos("TGAS",1,"TPC ",0.,0.,0.,0,"ONLY");
//----------------------------------------------------------
// "side" gas volume, the same as the drift gas
// the readout chambers are placed there.
//----------------------------------------------------------
dm[0] = 78.;
dm[1] = 258.;
dm[2] = 0.5*(275. - 250.);
gMC->Gsvolu("TPSG", "TUBE", idtmed[2], dm, 3);
Float_t z_side = dm[2]; // 1/2 of the side gas thickness
//-----------------------------------------------------------
// Readout chambers , 25% of X0, I use Al as the material
//-----------------------------------------------------------
Float_t InnerOpenAngle = fTPCParam->GetInnerAngle();
Float_t OuterOpenAngle = fTPCParam->GetOuterAngle();
Float_t InnerAngleShift = fTPCParam->GetInnerAngleShift();
Float_t OuterAngleShift = fTPCParam->GetOuterAngleShift();
Float_t InSecLowEdge = fTPCParam->GetInSecLowEdge();
Float_t InSecUpEdge = fTPCParam->GetInSecUpEdge();
Float_t OuSecLowEdge = fTPCParam->GetOuSecLowEdge();
Float_t OuSecUpEdge = fTPCParam->GetOuSecUpEdge();
Float_t SecThick = 2.225; // Al
Float_t edge = fTPCParam->GetEdge();
// S (Inner) sectors
dm[0] = InSecLowEdge*TMath::Tan(0.5*InnerOpenAngle)-edge;
dm[1] = InSecUpEdge*TMath::Tan(0.5*InnerOpenAngle)-edge;
dm[2] = 0.5*SecThick;
dm[3] = 0.5*(InSecUpEdge-InSecLowEdge);
Float_t xCenterS = InSecLowEdge+dm[3];
gMC->Gsvolu("TRCS", "TRD1", idtmed[0], dm, 4);
// L (Outer) sectors
dm[0] = OuSecLowEdge*TMath::Tan(0.5*OuterOpenAngle)-edge;
dm[1] = OuSecUpEdge*TMath::Tan(0.5*OuterOpenAngle)-edge;
dm[2] = 0.5*SecThick;
dm[3] = 0.5*(OuSecUpEdge-OuSecLowEdge);
Float_t xCenterL = OuSecLowEdge+dm[3];
gMC->Gsvolu("TRCL", "TRD1", idtmed[0], dm, 4);
Float_t z1 = -z_side + SecThick*0.5;
//------------------------------------------------------------------
// S sectors - "gas sectors" (TRD1)
//------------------------------------------------------------------
dm[0] = InSecLowEdge*TMath::Tan(0.5*InnerOpenAngle)-0.01;
dm[1] = InSecUpEdge*TMath::Tan(0.5*InnerOpenAngle)-0.01;
dm[2] = 0.5*(250. - 0.001);
dm[3] = 0.5*(InSecUpEdge-InSecLowEdge);
gMC->Gsvolu("TSGA", "TRD1", idtmed[4], dm, 4); // sensitive
// -------------------------------------------------------------
// Only for the debugging purpose and resolution calculation
// Sensitive strips at the pad-row center
// -------------------------------------------------------------
Int_t ns;
if(fSens>=0){
Float_t r1,r2,zz;
Float_t StripThick = 0.01; // 100 microns
Float_t dead = fTPCParam->GetDeadZone();
gMC->Gsvolu("TSST", "TRD1", idtmed[4], dm, 0);
dm[2] = 0.5*(250. - 0.002);
dm[3] = 0.5 * StripThick;
for (ns = 0; ns < fTPCParam->GetNRowLow(); ns++) {
r1 = fTPCParam->GetPadRowRadiiLow(ns);
r2 = r1 + StripThick;
dm[0] = r1 * TMath::Tan(0.5*InnerOpenAngle) - dead;
dm[1] = r2 * TMath::Tan(0.5*InnerOpenAngle) - dead;
zz = -InSecLowEdge -0.5*(InSecUpEdge-InSecLowEdge);
zz += r1;
zz += dm[3];
gMC->Gsposp("TSST", ns+1, "TSGA", 0., 0., zz, 0, "ONLY", dm, 4);
}
gMC->Gsord("TSGA", 3);
} // if strips selected
//-----------------------------------------------------------------
// L sectors - "gas sectors" (PGON to avoid overlaps)
//-----------------------------------------------------------------
dm[0] = 360.*kDegrad - 0.5*OuterOpenAngle;
dm[0] *= kRaddeg;
dm[0] = (Float_t)TMath::Nint(dm[0]);
dm[1] = OuterOpenAngle*kRaddeg;
dm[1] = (Float_t)TMath::Nint(dm[1]);
dm[2] = 1.;
dm[3] = 4.;
dm[4] = 0.002;
dm[5] = OuSecLowEdge;
dm[6] = 252.*TMath::Cos(0.5*OuterOpenAngle)-0.002;
dm[7] = dm[4]+0.2;
dm[8] = dm[5];
dm[9] = dm[6];
dm[10] = dm[7];
dm[11] = OuSecLowEdge;
dm[12] = OuSecUpEdge;
dm[13] = 250.;
dm[14] = dm[11];
dm[15] = dm[12];
gMC->Gsvolu("TLGA","PGON",idtmed[4],dm,16);
if (fSens >= 0) {
Float_t rmax = dm[6];
Float_t r1,r2;
Float_t dead = fTPCParam->GetDeadZone();
Float_t StripThick = 0.01; // 100 microns
gMC->Gsvolu("TLST", "PGON", idtmed[4], dm, 0);
dm[0] = 360.*kDegrad - 0.5*OuterOpenAngle;
dm[0] *= kRaddeg;
dm[0] = (Float_t)TMath::Nint(dm[0]);
dm[1] = OuterOpenAngle*kRaddeg;
dm[1] = (Float_t)TMath::Nint(dm[1]);
dm[2] = 1.;
dm[3] = 2.;
dm[7] = 250.;
Float_t xx = dead/TMath::Tan(0.5*OuterOpenAngle);
for(ns=0;nsGetNRowUp();ns++){
r1 = fTPCParam->GetPadRowRadiiUp(ns)-xx;
r2 = r1 + StripThick;
dm[5] = r1;
dm[6] = r2;
dm[8] = r1;
dm[9] = r2;
if(r2+xx < rmax){
dm[4] = 0.002;
}
else{
dm[4] = 0.202;
}
gMC->Gsposp("TLST",ns+1,"TLGA",xx,0.,0.,0,"ONLY",dm,10);
}
gMC->Gsord("TLGA", 4);
} // if strips selected
//------------------------------------------------------------------
// Positioning of the S-sector readout chambers
//------------------------------------------------------------------
Float_t zs = 0.5*(250.+0.002);
Float_t theta1,theta2,theta3;
Float_t phi1,phi2,phi3;
Float_t alpha;
Float_t x,y;
for(ns=0;ns 360.) phi1 -= 360.;
theta1 = 90.;
phi2 = 90.;
theta2 = 180.;
phi3 = ns * InnerOpenAngle + InnerAngleShift;
phi3 *= kRaddeg; // in degrees
phi3 = (Float_t)TMath::Nint(phi3);
if(phi3 > 360.) phi3 -= 360.;
theta3 = 90.;
alpha = phi3*kDegrad;
x = xCenterS * TMath::Cos(alpha);
y = xCenterS * TMath::Sin(alpha);
AliMatrix(idrotm[nRotMat], theta1, phi1, theta2, phi2, theta3, phi3);
gMC->Gspos("TRCS", ns+1, "TPSG", x, y, z1, idrotm[nRotMat], "ONLY");
if(fSecAL < 0){
//---------------------------------------------------------------
// position all sectors
//---------------------------------------------------------------
gMC->Gspos("TSGA",ns+1,"TGAS",x,y,zs,idrotm[nRotMat], "ONLY");
gMC->Gspos("TSGA",ns+1+nInnerSector,"TGAS",x,y,-zs,idrotm[nRotMat], "ONLY");
}
else{
//---------------------------------------------------------------
// position selected sectors
//---------------------------------------------------------------
for(Int_t sel=0;sel<6;sel++){
if(fSecLows[sel] == ns){
gMC->Gspos("TSGA", ns+1, "TGAS", x, y, zs, idrotm[nRotMat], "ONLY");
}
else if(fSecLows[sel] == ns+nInnerSector){
gMC->
Gspos("TSGA",ns+1+nInnerSector,"TGAS", x, y,-zs,idrotm[nRotMat],"ONLY");
}
}
}
nRotMat++;
}
//-------------------------------------------------------------------
// Positioning of the L-sectors readout chambers
//-------------------------------------------------------------------
for(ns=0;ns 360.) phi1 -= 360.;
theta1 = 90.;
phi2 = 90.;
theta2 = 180.;
phi3 = ns * OuterOpenAngle+OuterAngleShift;
phi3 *= kRaddeg; // in degrees
phi3 = (Float_t)TMath::Nint(phi3);
if(phi3 > 360.) phi3 -= 360.;
theta3 = 90.;
alpha = phi3*kDegrad;
x = xCenterL * TMath::Cos(alpha);
y = xCenterL * TMath::Sin(alpha);
AliMatrix(idrotm[nRotMat], theta1, phi1, theta2, phi2, theta3, phi3);
gMC->Gspos("TRCL", ns+1, "TPSG", x, y, z1, idrotm[nRotMat], "ONLY");
nRotMat++;
}
//-------------------------------------------------------------------
// Positioning of the L-sectors (gas sectors)
//-------------------------------------------------------------------
for(ns=0;ns360.) phi1 -= 360.;
theta1 = 90.;
phi2 = 90. + phi1;
if(phi2>360.) phi2 -= 360.;
theta2 = 90.;
phi3 = 0.;
theta3 = 0.;
if(fSecAU < 0) {
//--------------------------------------------------------------
// position all sectors
//--------------------------------------------------------------
AliMatrix(idrotm[nRotMat], theta1, phi1, theta2, phi2, theta3, phi3);
gMC->Gspos("TLGA",ns+1,"TGAS" ,0.,0.,0.,idrotm[nRotMat],"ONLY");
nRotMat++;
// reflection !!
phi3 = 0.;
theta3 = 180.;
AliMatrix(idrotm[nRotMat], theta1, phi1, theta2, phi2, theta3, phi3);
gMC->Gspos("TLGA",ns+1+nOuterSector,"TGAS" ,0.,0.,0.,idrotm[nRotMat],"ONLY");
nRotMat++;
}
else{
//---------------------------------------------------------------
// position selected sectors
//---------------------------------------------------------------
for(Int_t sel=0;sel<12;sel++){
if(fSecUps[sel] == ns+2*nInnerSector){
AliMatrix(idrotm[nRotMat], theta1, phi1, theta2, phi2, theta3, phi3);
gMC->Gspos("TLGA",ns+1,"TGAS" ,0.,0.,0.,idrotm[nRotMat],"ONLY");
nRotMat++;
}
else if(fSecUps[sel] == ns+2*nInnerSector+nOuterSector){
// reflection
phi3 = 0.;
theta3 = 180.;
AliMatrix(idrotm[nRotMat], theta1, phi1, theta2, phi2, theta3, phi3);
gMC->
Gspos("TLGA",ns+1+nOuterSector,"TGAS" ,0.,0.,0.,idrotm[nRotMat],"ONLY");
nRotMat++;
}
}
}
}
Float_t z0 = z_side - 0.95;
gMC->Gspos("TPEC",1,"TPSG",0.,0.,z0,0,"ONLY");
// ==========================================================
// wheels
// ==========================================================
//
// auxilary structures
//
gMC->Gsvolu("TPWI","TUBE",idtmed[24],dm,0); // "air"
// ----------------------------------------------------------
// Large wheel -> positioned in the TPC
// ----------------------------------------------------------
z0 = 263.5; // TPC length - 1/2 spoke wheel width
dm[0] = 258.;
dm[1] = 278.;
dm[2] = 11.5;
gMC->Gsvolu("TPWL", "TUBE", idtmed[0], dm, 3);
dm[0] = dm[0]+2.;
dm[1] = 278.;
dm[2] = dm[2]-2.;
gMC->Gsposp("TPWI",1,"TPWL",0.,0.,0.,0,"ONLY",dm,3);
gMC->Gspos("TPWL", 1, "TPC ", 0, 0, z0, 0, "ONLY");
gMC->Gspos("TPWL", 2, "TPC ", 0, 0, -z0, 0, "ONLY");
//
// Outer vessel + CO2 HV degrader
//
dm[0] = 260.;
dm[1] = 278.;
dm[2] = 252.;
gMC->Gsvolu("TPCO","TUBE",idtmed[12],dm,3);
dm[0] = 275.;
dm[1] = 278.;
gMC->Gsvolu("TPOV","TUBE",idtmed[10],dm,3);
gMC->Gspos("TPOV",1,"TPCO",0.,0.,0.,0,"ONLY");
// G10 plugs
dm[0] = 258.;
dm[1] = 260.;
dm[2] = 1.;
gMC->Gsvolu("TPG1","TUBE",idtmed[8],dm,3);
gMC->Gspos("TPG1",1,"TPCO",0.,0.,251.,0,"ONLY");
gMC->Gspos("TPG1",2,"TPCO",0.,0.,-251.,0,"ONLY");
gMC->Gspos("TPCO",1,"TPC ",0.,0.,0.,0,"ONLY");
//----------------------------------------------------------
// Small wheel -> positioned in "side gas
//----------------------------------------------------------
dm[0] = 78.;
dm[1] = 82.;
dm[2] = 11.5;
gMC->Gsvolu("TPWS", "TUBE", idtmed[0], dm, 3);
dm[0] = 78.;
dm[1] = dm[1]-2;
dm[2] = dm[2]-2.;
gMC->Gsvolu("TPW1", "TUBE", idtmed[2], dm, 3);
gMC->Gspos("TPW1", 1, "TPWS", 0., 0., 0., 0, "ONLY");
z0 = 1.; // spoke wheel is shifted w.r.t. center of the "side gas"
gMC->Gspos("TPWS", 1, "TPSG", 0, 0, z0, 0, "ONLY");
// to avoid overlaps
dm[0] = 76.;
dm[1] = 78.;
dm[2] = 11.5;
gMC->Gsvolu("TPS1","TUBE",idtmed[0],dm,3);
dm[2] = 9.5;
gMC->Gsvolu("TPS2","TUBE",idtmed[24],dm,3);
gMC->Gspos("TPS2",1,"TPS1",0.,0.,0.,0,"ONLY");
z0= 263.5;
gMC->Gspos("TPS1",1,"TPC ",0.,0.,z0,0,"ONLY");
gMC->Gspos("TPS1",2,"TPC ",0.,0.,-z0,0,"ONLY");
// G10 plug
dm[0] = 76.;
dm[1] = 78.;
dm[2] = 1.;
gMC->Gsvolu("TPG2","TUBE",idtmed[8],dm,3);
z0 = 251.;
gMC->Gspos("TPG2",1,"TPC ",0.,0.,z0,0,"ONLY");
gMC->Gspos("TPG2",2,"TPC ",0.,0.,-z0,0,"ONLY");
//---------------------------------------------------------
// central wheel 6 (radial direction) x 4 (along z) cm2
//---------------------------------------------------------
dm[0] = 140.;
dm[1] = 146.;
dm[2] = 2.;
gMC->Gsvolu("TPWC","TUBE",idtmed[0],dm,3);
dm[0] = dm[0] + 2.;
dm[1] = dm[1] - 2.;
dm[2] = dm[2] - 1.;
gMC->Gsposp("TPWI",2,"TPWC",0.,0.,0.,0,"ONLY",dm,3);
z0 = z_side - 1.9 - 2.;
gMC->Gspos("TPWC",1,"TPSG",0.,0.,z0,0,"ONLY");
//
gMC->Gsvolu("TPSE","BOX ",idtmed[24],dm,0); // "empty" part of the spoke
//---------------------------------------------------------
// inner spokes (nSectorInner)
//---------------------------------------------------------
dm[0] = 0.5*(139.9-82.1);
dm[1] = 3.;
dm[2] = 2.;
Float_t x1 = dm[0]+82.;
gMC->Gsvolu("TPSI","BOX",idtmed[0],dm,3);
dm[1] = dm[1]-1.;
dm[2] = dm[2]-1.;
gMC->Gsposp("TPSE",1,"TPSI",0.,0.,0.,0,"ONLY",dm,3);
for(ns=0;ns360.) phi1 -= 360.;
phi2 = phi1+90.;
if(phi2>360.) phi2 -= 360.;
theta2=90.;
phi3=0.;
theta3=0.;
alpha = phi1 * kDegrad;
x = x1 * TMath::Cos(alpha);
y = x1 * TMath::Sin(alpha);
AliMatrix(idrotm[nRotMat],theta1,phi1,theta2,phi2,theta3,phi3);
gMC->Gspos("TPSI",ns+1,"TPSG",x,y,z0,idrotm[nRotMat],"ONLY");
nRotMat++;
}
//-------------------------------------------------------------
// outer spokes (nSectorOuter)
//-------------------------------------------------------------
dm[0] = 0.5*(257.9-146.1);
dm[1] = 3.;
dm[2] = 2.;
x1 = dm[0] + 146.;
gMC->Gsvolu("TPSO","BOX ",idtmed[0],dm,3);
dm[1] = dm[1] - 1.;
dm[2] = dm[2] - 1.;
gMC->Gsposp("TPSE",2,"TPSO",0.,0.,0.,0,"ONLY",dm,3);
for(ns=0;ns360.) phi1 -= 360.;
phi2 = phi1+90.;
if(phi2>360.) phi2 -= 360.;
theta2=90.;
phi3=0.;
theta3=0.;
alpha = phi1 * kDegrad;
x = x1 * TMath::Cos(alpha);
y = x1 * TMath::Sin(alpha);
AliMatrix(idrotm[nRotMat],theta1,phi1,theta2,phi2,theta3,phi3);
gMC->Gspos("TPSO",ns+1,"TPSG",x,y,z0,idrotm[nRotMat],"ONLY");
nRotMat++;
}
// --------------------------------------------------------
// put the readout chambers into the TPC
// --------------------------------------------------------
theta1 = 90.;
phi1 = 0.;
theta2 = 90.;
phi2 = 270.;
theta3 = 180.;
phi3 = 0.;
AliMatrix(idrotm[nRotMat], theta1, phi1, theta2, phi2, theta3, phi3);
z0 = z_side + 250.;
gMC->Gspos("TPSG", 1, "TPC ", 0, 0, z0, 0, "ONLY");
gMC->Gspos("TPSG", 2, "TPC ", 0, 0, -z0, idrotm[nRotMat], "ONLY");
gMC->Gspos("TPC ", 1, "ALIC", 0, 0, 0, 0, "ONLY");
//----------------------------------------------------
// Inner vessel and HV degrader
//----------------------------------------------------
dm[0] = 0.;
dm[1] = 360.;
dm[2] = 4.;
dm[3] = -250.;
dm[4] = 74.4;
dm[5] = 76.;
dm[6] = -64.5;
dm[7] = 50.;
dm[8] = 76.;
dm[9] = 64.5;
dm[10] = 50.;
dm[11] = 76.;
dm[12] = 250.;
dm[13] = 74.4;
dm[14] = 76.;
gMC->Gsvolu("TPVD", "PCON", idtmed[12], dm, 15); // CO2
// cone parts
dm[0] = 0.;
dm[1] = 360.;
dm[2] = 2.;
dm[3] = 64.5;
dm[4] = 50.;
dm[5] = 51.6;
dm[6] = 250.;
dm[7] = 74.4;
dm[8] = 76.;
gMC->Gsvolu("TIVC","PCON",idtmed[11],dm,9); // C-fibre
gMC->Gspos("TIVC",1,"TPVD",0.,0.,0.,0,"ONLY");
gMC->Gspos("TIVC",2,"TPVD",0.,0.,0.,idrotm[nRotMat],"ONLY");
// barrel part
dm[0] = 50.;
dm[1] = 50.5;
dm[2] = 64.5;
gMC->Gsvolu("TIVB","TUBE",idtmed[9],dm,3);
gMC->Gspos("TIVB",1,"TPVD",0.,0.,0.,0,"ONLY");
gMC->Gspos("TPVD",1,"ALIC",0.,0.,0.,0,"ONLY");
// ---------------------------------------------------
// volumes ordering
// ---------------------------------------------------
gMC->Gsord("TGAS", 6);
gMC->Gsord("TPSG", 6);
} // end of function
//_____________________________________________________________________________
void AliTPCv2::DrawDetector()
{
//
// Draw a shaded view of the Time Projection Chamber version 1
//
// Set everything unseen
gMC->Gsatt("*", "seen", -1);
//
// Set ALIC mother transparent
gMC->Gsatt("ALIC","SEEN",0);
//
// Set the volumes visible
gMC->Gsatt("TPC","SEEN",0);
gMC->Gsatt("TGAS","SEEN",0);
gMC->Gsatt("TPSG","SEEN",0);
gMC->Gsatt("TPHV","SEEN",1);
gMC->Gsatt("TPMH","SEEN",1);
gMC->Gsatt("TPEC","SEEN",0);
gMC->Gsatt("TRCS","SEEN",1);
gMC->Gsatt("TRCL","SEEN",1);
gMC->Gsatt("TPWL","SEEN",1);
gMC->Gsatt("TPWI","SEEN",1);
gMC->Gsatt("TPWS","SEEN",1);
gMC->Gsatt("TPW1","SEEN",1);
gMC->Gsatt("TPS1","SEEN",1);
gMC->Gsatt("TPS2","SEEN",1);
gMC->Gsatt("TPG1","SEEN",1);
gMC->Gsatt("TPG2","SEEN",1);
gMC->Gsatt("TPWC","SEEN",1);
gMC->Gsatt("TPSI","SEEN",1);
gMC->Gsatt("TPSO","SEEN",1);
gMC->Gsatt("TPCO","SEEN",1);
gMC->Gsatt("TPOV","SEEN",1);
gMC->Gsatt("TPVD","SEEN",1);
//
gMC->Gdopt("hide", "on");
gMC->Gdopt("shad", "on");
gMC->Gsatt("*", "fill", 7);
gMC->SetClipBox(".");
gMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000);
gMC->DefaultRange();
gMC->Gdraw("alic", 40, 30, 0, 12, 9.5, .025, .025);
gMC->Gdhead(1111, "Time Projection Chamber");
gMC->Gdman(18, 4, "MAN");
gMC->Gdopt("hide","off");
}
//_____________________________________________________________________________
void AliTPCv2::CreateMaterials()
{
//
// Define materials for version 2 of the Time Projection Chamber
//
//
// Increase maximum number of steps
gMC->SetMaxNStep(30000);
//
AliTPC::CreateMaterials();
}
//_____________________________________________________________________________
void AliTPCv2::Init()
{
//
// Initialises version 2 of the TPC after that it has been built
//
Int_t *idtmed = fIdtmed->GetArray()-399;
AliTPC::Init();
fIdSens1=gMC->VolId("TLGA"); // L-sector
fIdSens2=gMC->VolId("TSGA"); // S-sector
fIdSens3=gMC->VolId("TSST"); // strip - S-sector (not always used)
fIdSens4=gMC->VolId("TLST"); // strip - S-sector (not always used)
gMC->SetMaxNStep(30000); // max. number of steps increased
gMC->Gstpar(idtmed[403],"LOSS",5);
printf("*** TPC version 2 initialized ***\n");
printf("Maximum number of steps = %d\n",gMC->GetMaxNStep());
//
}
//_____________________________________________________________________________
void AliTPCv2::StepManager()
{
//
// Called for every step in the Time Projection Chamber
//
//
// parameters used for the energy loss calculations
//
const Float_t prim = 14.35; // number of primary collisions per 1 cm
const Float_t poti = 20.77e-9; // first ionization potential for Ne/CO2
const Float_t w_ion = 35.97e-9; // energy for the ion-electron pair creation
// const Float_t prim = 17.65;
// const Float_t poti = 19.02e-9;
// const Float_t w_ion = 33.06e-9;
const Float_t big = 1.e10;
Int_t id,copy;
Float_t hits[4];
Int_t vol[2];
TClonesArray &lhits = *fHits;
TLorentzVector pos;
AliTPCParam *fTPCParam = &(fDigParam->GetParam());
vol[1]=0;
//
gMC->SetMaxStep(big);
if(!gMC->IsTrackAlive()) return; // particle has disappeared
Float_t charge = gMC->TrackCharge();
if(TMath::Abs(charge)<=0.) return; // take only charged particles
id=gMC->CurrentVolID(copy);
// Check the sensitive volume
if(id == fIdSens1)
{
vol[0] = copy + fTPCParam->GetNInnerSector()-1; // L-sector number
}
else if(id == fIdSens2)
{
vol[0] = copy-1; // S-sector number
}
else if(id == fIdSens3 && gMC->IsTrackEntering())
{
vol[1] = copy-1; // row number
id = gMC->CurrentVolOffID(1,copy);
vol[0] = copy-1; // sector number (S-sector)
gMC->TrackPosition(pos);
hits[0]=pos[0];
hits[1]=pos[1];
hits[2]=pos[2];
hits[3]=0.; // this hit has no energy loss
new(lhits[fNhits++]) AliTPChit(fIshunt,gAlice->CurrentTrack(),vol,hits);
}
else if(id == fIdSens4 && gMC->IsTrackEntering())
{
vol[1] = copy-1; // row number
id = gMC->CurrentVolOffID(1,copy);
vol[0] = copy+fTPCParam->GetNInnerSector()-1; // sector number (L-sector)
gMC->TrackPosition(pos);
hits[0]=pos[0];
hits[1]=pos[1];
hits[2]=pos[2];
hits[3]=0.; // this hit has no energy loss
new(lhits[fNhits++]) AliTPChit(fIshunt,gAlice->CurrentTrack(),vol,hits);
}
else return;
//
// charged particle is in the sensitive volume
//
if(gMC->TrackStep() > 0) {
Int_t nel = (Int_t)(((gMC->Edep())-poti)/w_ion) + 1;
nel=TMath::Min(nel,300); // 300 electrons corresponds to 10 keV
gMC->TrackPosition(pos);
hits[0]=pos[0];
hits[1]=pos[1];
hits[2]=pos[2];
hits[3]=(Float_t)nel;
// Add this hit
new(lhits[fNhits++]) AliTPChit(fIshunt,gAlice->CurrentTrack(),vol,hits);
}
// Stemax calculation for the next step
Float_t pp;
TLorentzVector mom;
gMC->TrackMomentum(mom);
Float_t ptot=mom.Rho();
Float_t beta_gamma = ptot/gMC->TrackMass();
Int_t pid=gMC->TrackPid();
if((pid==kElectron || pid==kPositron || pid==kGamma) && ptot > 0.002)
{
pp = prim*1.58; // electrons above 20 MeV/c are on the plateau!
}
else
{
pp=prim*BetheBloch(beta_gamma);
if(TMath::Abs(charge) > 1.) pp *= (charge*charge);
}
Float_t random[1];
gMC->Rndm(random,1); // good, old GRNDM from Geant3
Double_t rnd = (Double_t)random[0];
gMC->SetMaxStep(-TMath::Log(rnd)/pp);
}
//_____________________________________________________________________________
Float_t AliTPCv2::BetheBloch(Float_t bg)
{
//
// Bethe-Bloch energy loss formula
//
const Double_t p1=0.76176e-1;
const Double_t p2=10.632;
const Double_t p3=0.13279e-4;
const Double_t p4=1.8631;
const Double_t p5=1.9479;
Double_t dbg = (Double_t) bg;
Double_t beta = dbg/TMath::Sqrt(1.+dbg*dbg);
Double_t aa = TMath::Power(beta,p4);
Double_t bb = TMath::Power(1./dbg,p5);
bb=TMath::Log(p3+bb);
return ((Float_t)((p2-aa-bb)*p1/aa));
}