void AliEMCALQADataMakerRec::InitRaws()
{
// create Raws histograms in Raws subdir
- const Bool_t expert = kTRUE ;
- const Bool_t saveCorr = kTRUE ;
- const Bool_t image = kTRUE ;
+ const Bool_t expert = kTRUE ;
+ const Bool_t saveCorr = kTRUE ;
+ const Bool_t image = kTRUE ;
+ const Option_t *profileOption = "s";
Int_t nTowersPerSM = AliEMCALGeoParams::fgkEMCALRows * AliEMCALGeoParams::fgkEMCALCols; // number of towers in a SuperModule; 24x48
Int_t nTot = fSuperModules * nTowersPerSM; // max number of towers in all SuperModules
-
-
- //Defining histograms binning, each 2D histogram covers all SMs
- Int_t nSMSectors = fSuperModules / 2; // 2 SMs per sector
- Int_t nbinsZ = 2*AliEMCALGeoParams::fgkEMCALCols;
- Int_t nbinsPhi = nSMSectors * AliEMCALGeoParams::fgkEMCALRows;
+
+ //Defining histograms binning, each 2D histogram covers all SMs
+ Int_t nSMSectors = fSuperModules / 2; // 2 SMs per sector
+ Int_t nbinsZ = 2*AliEMCALGeoParams::fgkEMCALCols;
+ Int_t nbinsPhi = nSMSectors * AliEMCALGeoParams::fgkEMCALRows;
// counter info: number of channels per event (bins are SM index)
TProfile * h0 = new TProfile("hLowEmcalSupermodules", "Low Gain EMC: # of towers vs SuperMod;SM Id;# of towers",
- fSuperModules, -0.5, fSuperModules-0.5) ;
- Add2RawsList(h0, kNsmodLG, expert, image, !saveCorr) ;
+ fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
+ Add2RawsList(h0, kNsmodLG, expert, !image, !saveCorr) ;
TProfile * h1 = new TProfile("hHighEmcalSupermodules", "High Gain EMC: # of towers vs SuperMod;SM Id;# of towers",
- fSuperModules, -0.5, fSuperModules-0.5) ;
- Add2RawsList(h1, kNsmodHG, expert, image, !saveCorr) ;
+ fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
+ Add2RawsList(h1, kNsmodHG, expert, !image, !saveCorr) ;
// where did max sample occur? (bins are towers)
TProfile * h2 = new TProfile("hLowEmcalRawtime", "Low Gain EMC: Time at Max vs towerId;Tower Id;Time [ticks]",
- nTot, -0.5, nTot-0.5) ;
- Add2RawsList(h2, kTimeLG, expert, image, !saveCorr) ;
+ nTot, -0.5, nTot-0.5, profileOption) ;
+ Add2RawsList(h2, kTimeLG, expert, !image, !saveCorr) ;
TProfile * h3 = new TProfile("hHighEmcalRawtime", "High Gain EMC: Time at Max vs towerId;Tower Id;Time [ticks]",
- nTot, -0.5, nTot-0.5) ;
- Add2RawsList(h3, kTimeHG, expert, image, !saveCorr) ;
+ nTot, -0.5, nTot-0.5, profileOption) ;
+ Add2RawsList(h3, kTimeHG, expert, !image, !saveCorr) ;
// how much above pedestal was the max sample? (bins are towers)
TProfile * h4 = new TProfile("hLowEmcalRawMaxMinusMin", "Low Gain EMC: Max - Min vs towerId;Tower Id;Max-Min [ADC counts]",
- nTot, -0.5, nTot-0.5) ;
+ nTot, -0.5, nTot-0.5, profileOption) ;
Add2RawsList(h4, kSigLG, expert, image, !saveCorr) ;
TProfile * h5 = new TProfile("hHighEmcalRawMaxMinusMin", "High Gain EMC: Max - Min vs towerId;Tower Id;Max-Min [ADC counts]",
- nTot, -0.5, nTot-0.5) ;
+ nTot, -0.5, nTot-0.5, profileOption) ;
Add2RawsList(h5, kSigHG, expert, image, !saveCorr) ;
// total counter: channels per event
TH1I * h6 = new TH1I("hLowNtot", "Low Gain EMC: Total Number of found towers;# of Towers;Counts", 200, 0, nTot) ;
h6->Sumw2() ;
- Add2RawsList(h6, kNtotLG, expert, image, !saveCorr) ;
+ Add2RawsList(h6, kNtotLG, expert, !image, !saveCorr) ;
TH1I * h7 = new TH1I("hHighNtot", "High Gain EMC: Total Number of found towers;# of Towers;Counts", 200,0, nTot) ;
h7->Sumw2() ;
- Add2RawsList(h7, kNtotHG, expert, image, !saveCorr) ;
+ Add2RawsList(h7, kNtotHG, expert, !image, !saveCorr) ;
// pedestal (bins are towers)
TProfile * h8 = new TProfile("hLowEmcalRawPed", "Low Gain EMC: Pedestal vs towerId;Tower Id;Pedestal [ADC counts]",
- nTot, -0.5, nTot-0.5) ;
- Add2RawsList(h8, kPedLG, expert, image, !saveCorr) ;
+ nTot, -0.5, nTot-0.5, profileOption) ;
+ Add2RawsList(h8, kPedLG, expert, !image, !saveCorr) ;
TProfile * h9 = new TProfile("hHighEmcalRawPed", "High Gain EMC: Pedestal vs towerId;Tower Id;Pedestal [ADC counts]",
- nTot, -0.5, nTot-0.5) ;
- Add2RawsList(h9, kPedHG, expert, image, !saveCorr) ;
+ nTot, -0.5, nTot-0.5, profileOption) ;
+ Add2RawsList(h9, kPedHG, expert, !image, !saveCorr) ;
- //number of events per tower, for shifter fast check
- TH1I * h12 = new TH1I("hTowerHG", "High Gains on the Tower;Tower", nTot,0, nTot) ;
- h12->Sumw2() ;
- Add2RawsList(h12, kTowerHG, !expert, image, !saveCorr) ;
- TH1I * h13 = new TH1I("hTowerLG", "Low Gains on the Tower;Tower", nTot,0, nTot) ;
- h13->Sumw2() ;
- Add2RawsList(h13, kTowerLG, !expert, image, !saveCorr) ;
-
//temp 2D amplitude histogram for the current run
fHighEmcHistoH2F = new TH2F("h2DHighEC2", "High Gain EMC:Max - Min [ADC counts]", nbinsZ, -0.5 , nbinsZ-0.5, nbinsPhi, -0.5, nbinsPhi-0.5);
fHighEmcHistoH2F->SetDirectory(0) ; // this histo must be memory resident
nbinsPhi, -0.5, nbinsPhi-0.5);
//settings for display in amore
h15->SetTitle("Amplitude_{current run}/Amplitude_{reference run}");
- h15->SetMaximum(1.6);
- h15->SetMinimum(0.4);
- h15->SetOption("COLZ");
- gStyle->SetOptStat(0);
- Int_t color[] = {4,3,2} ;
- gStyle->SetPalette(3,color);
- h15->GetZaxis()->SetNdivisions(3);
- h15->UseCurrentStyle();
- h15->SetDirectory(0);
+ h15->SetMaximum(2.0);
+ h15->SetMinimum(0.1);
+ h15->SetOption("COLZ");
+ gStyle->SetOptStat(0);
+ Int_t color[] = {4,3,2} ;
+ gStyle->SetPalette(3,color);
+ h15->GetZaxis()->SetNdivisions(3);
+ h15->UseCurrentStyle();
+ h15->SetDirectory(0);
Add2RawsList(h15, k2DRatioAmp, !expert, image, !saveCorr) ;
TH1F * h16 = new TH1F("hRatioDist", "Amplitude_{current run}/Amplitude_{reference run} ratio distribution", nTot, 0., 2.);
- h16->SetMinimum(1.);
+ h16->SetMinimum(0.1);
+ h16->SetMaximum(100.);
+ gStyle->SetOptStat(0);
+ h16->UseCurrentStyle();
h16->SetDirectory(0);
Add2RawsList(h16, kRatioDist, !expert, image, !saveCorr) ;
// counter info: number of channels per event (bins are SM index)
TProfile * hT0 = new TProfile("hTRUEmcalSupermodules", "TRU EMC: # of TRU channels vs SuperMod;SM Id;# of TRU channels",
- fSuperModules, -0.5, fSuperModules-0.5) ;
- Add2RawsList(hT0, kNsmodTRU, expert, image, !saveCorr) ;
+ fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
+ Add2RawsList(hT0, kNsmodTRU, expert, !image, !saveCorr) ;
// where did max sample occur? (bins are TRU channels)
TProfile * hT1 = new TProfile("hTRUEmcalRawtime", "TRU EMC: Time at Max vs 2x2Id;2x2 Id;Time [ticks]",
- nTot2x2, -0.5, nTot2x2-0.5) ;
- Add2RawsList(hT1, kTimeTRU, expert, image, !saveCorr) ;
+ nTot2x2, -0.5, nTot2x2-0.5, profileOption) ;
+ Add2RawsList(hT1, kTimeTRU, expert, !image, !saveCorr) ;
// how much above pedestal was the max sample? (bins are TRU channels)
TProfile * hT2 = new TProfile("hTRUEmcalRawMaxMinusMin", "TRU EMC: Max - Min vs 2x2Id;2x2 Id;Max-Min [ADC counts]",
- nTot2x2, -0.5, nTot2x2-0.5) ;
- Add2RawsList(hT2, kSigTRU, expert, image, !saveCorr) ;
+ nTot2x2, -0.5, nTot2x2-0.5, profileOption) ;
+ Add2RawsList(hT2, kSigTRU, expert, !image, !saveCorr) ;
// total counter: channels per event
TH1I * hT3 = new TH1I("hTRUNtot", "TRU EMC: Total Number of found TRU channels;# of TRU Channels;Counts", 200, 0, nTot2x2) ;
hT3->Sumw2() ;
- Add2RawsList(hT3, kNtotTRU, expert, image, !saveCorr) ;
+ Add2RawsList(hT3, kNtotTRU, expert, !image, !saveCorr) ;
// pedestal (bins are TRU channels)
TProfile * hT4 = new TProfile("hTRUEmcalRawPed", "TRU EMC: Pedestal vs 2x2Id;2x2 Id;Pedestal [ADC counts]",
- nTot2x2, -0.5, nTot2x2-0.5) ;
- Add2RawsList(hT4, kPedTRU, expert, image, !saveCorr) ;
+ nTot2x2, -0.5, nTot2x2-0.5, profileOption) ;
+ Add2RawsList(hT4, kPedTRU, expert, !image, !saveCorr) ;
// L0 trigger hits: # of hits (bins are TRU channels)
TH1I * hT5 = new TH1I("hTRUEmcalL0hits", "L0 trigger hits: Total number of 2x2 L0 generated", nTot2x2, -0.5, nTot2x2);
hT5->Sumw2();
- Add2RawsList(hT5, kNL0TRU, expert, image, !saveCorr);
+ Add2RawsList(hT5, kNL0TRU, expert, !image, !saveCorr);
// L0 trigger hits: average time (bins are TRU channels)
- TProfile * hT6 = new TProfile("hTRUEmcalL0hitsAvgTime", "L0 trigger hits: average time bin", nTot2x2, -0.5, nTot2x2);
- Add2RawsList(hT6, kTimeL0TRU, expert, image, !saveCorr);
+ TProfile * hT6 = new TProfile("hTRUEmcalL0hitsAvgTime", "L0 trigger hits: average time bin", nTot2x2, -0.5, nTot2x2, profileOption);
+ Add2RawsList(hT6, kTimeL0TRU, expert, !image, !saveCorr);
// and also LED Mon..
// LEDMon has both high and low gain channels, just as regular FEE/towers
// counter info: number of channels per event (bins are SM index)
TProfile * hL0 = new TProfile("hLowLEDMonEmcalSupermodules", "LowLEDMon Gain EMC: # of strips vs SuperMod;SM Id;# of strips",
- fSuperModules, -0.5, fSuperModules-0.5) ;
- Add2RawsList(hL0, kNsmodLGLEDMon, expert, image, !saveCorr) ;
+ fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
+ Add2RawsList(hL0, kNsmodLGLEDMon, expert, !image, !saveCorr) ;
TProfile * hL1 = new TProfile("hHighLEDMonEmcalSupermodules", "HighLEDMon Gain EMC: # of strips vs SuperMod;SM Id;# of strips",
- fSuperModules, -0.5, fSuperModules-0.5) ;
- Add2RawsList(hL1, kNsmodHGLEDMon, expert, image, !saveCorr) ;
+ fSuperModules, -0.5, fSuperModules-0.5, profileOption) ;
+ Add2RawsList(hL1, kNsmodHGLEDMon, expert, !image, !saveCorr) ;
// where did max sample occur? (bins are strips)
TProfile * hL2 = new TProfile("hLowLEDMonEmcalRawtime", "LowLEDMon Gain EMC: Time at Max vs stripId;Strip Id;Time [ticks]",
- nTotLEDMon, -0.5, nTotLEDMon-0.5) ;
- Add2RawsList(hL2, kTimeLGLEDMon, expert, image, !saveCorr) ;
+ nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
+ Add2RawsList(hL2, kTimeLGLEDMon, expert, !image, !saveCorr) ;
TProfile * hL3 = new TProfile("hHighLEDMonEmcalRawtime", "HighLEDMon Gain EMC: Time at Max vs stripId;Strip Id;Time [ticks]",
- nTotLEDMon, -0.5, nTotLEDMon-0.5) ;
- Add2RawsList(hL3, kTimeHGLEDMon, expert, image, !saveCorr) ;
+ nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
+ Add2RawsList(hL3, kTimeHGLEDMon, expert, !image, !saveCorr) ;
// how much above pedestal was the max sample? (bins are strips)
TProfile * hL4 = new TProfile("hLowLEDMonEmcalRawMaxMinusMin", "LowLEDMon Gain EMC: Max - Min vs stripId;Strip Id;Max-Min [ADC counts]",
- nTotLEDMon, -0.5, nTotLEDMon-0.5) ;
- Add2RawsList(hL4, kSigLGLEDMon, expert, image, !saveCorr) ;
+ nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
+ Add2RawsList(hL4, kSigLGLEDMon, expert, !image, !saveCorr) ;
TProfile * hL5 = new TProfile("hHighLEDMonEmcalRawMaxMinusMin", "HighLEDMon Gain EMC: Max - Min vs stripId;Strip Id;Max-Min [ADC counts]",
- nTotLEDMon, -0.5, nTotLEDMon-0.5) ;
- Add2RawsList(hL5, kSigHGLEDMon, expert, image, !saveCorr) ;
+ nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
+ Add2RawsList(hL5, kSigHGLEDMon, expert, !image, !saveCorr) ;
// total counter: channels per event
TH1I * hL6 = new TH1I("hLowLEDMonNtot", "LowLEDMon Gain EMC: Total Number of found strips;# of Strips;Counts", 200, 0, nTotLEDMon) ;
hL6->Sumw2() ;
- Add2RawsList(hL6, kNtotLGLEDMon, expert, image, !saveCorr) ;
+ Add2RawsList(hL6, kNtotLGLEDMon, expert, !image, !saveCorr) ;
TH1I * hL7 = new TH1I("hHighLEDMonNtot", "HighLEDMon Gain EMC: Total Number of found strips;# of Strips;Counts", 200,0, nTotLEDMon) ;
hL7->Sumw2() ;
- Add2RawsList(hL7, kNtotHGLEDMon, expert, image, !saveCorr) ;
+ Add2RawsList(hL7, kNtotHGLEDMon, expert, !image, !saveCorr) ;
// pedestal (bins are strips)
TProfile * hL8 = new TProfile("hLowLEDMonEmcalRawPed", "LowLEDMon Gain EMC: Pedestal vs stripId;Strip Id;Pedestal [ADC counts]",
- nTotLEDMon, -0.5, nTotLEDMon-0.5) ;
- Add2RawsList(hL8, kPedLGLEDMon, expert, image, !saveCorr) ;
+ nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
+ Add2RawsList(hL8, kPedLGLEDMon, expert, !image, !saveCorr) ;
TProfile * hL9 = new TProfile("hHighLEDMonEmcalRawPed", "HighLEDMon Gain EMC: Pedestal vs stripId;Strip Id;Pedestal [ADC counts]",
- nTotLEDMon, -0.5, nTotLEDMon-0.5) ;
- Add2RawsList(hL9, kPedHGLEDMon, expert, image, !saveCorr) ;
+ nTotLEDMon, -0.5, nTotLEDMon-0.5, profileOption) ;
+ Add2RawsList(hL9, kPedHGLEDMon, expert, !image, !saveCorr) ;
//add two histograms for shifter from the LED monitor system: comapre LED monitor with the reference run
//to be used for decision whether we need to change reference data
TH1F * hL10 = new TH1F("hMaxMinusMinLEDMonRatio", "LEDMon amplitude, Ratio to reference run", nTotLEDMon, -0.5, nTotLEDMon-0.5) ;
- Add2RawsList(hL10, kLEDMonRatio, !expert, image, !saveCorr) ;
//settings for display in amore
hL10->SetTitle("Amplitude_{LEDMon current}/Amplitude_{LEDMon reference}");
- hL10->SetMaximum(1.6);
- hL10->SetMinimum(0.4);
+ hL10->SetMaximum(2.0);
+ hL10->SetMinimum(0.1);
+ gStyle->SetOptStat(0);
+ hL10->UseCurrentStyle();
+ hL10->SetDirectory(0);
// hL10->SetOption("E");
- TH1F * hL11 = new TH1F("hMaxMinusMinLEDMonRatioDist", "LEDMon amplitude, Ratio distribution", nTot, 0, 2);
- hL11->SetMinimum(1.) ;
+ Add2RawsList(hL10, kLEDMonRatio, !expert, image, !saveCorr) ;
+
+ TH1F * hL11 = new TH1F("hMaxMinusMinLEDMonRatioDist", "LEDMon amplitude, Ratio distribution", nTotLEDMon, 0, 2);
+ hL11->SetMinimum(0.1) ;
+ gStyle->SetOptStat(0);
+ hL11->UseCurrentStyle();
+ hL11->SetDirectory(0);
Add2RawsList(hL11, kLEDMonRatioDist, !expert, image, !saveCorr) ;
- GetCalibRefFromOCDB() ;
- GetCalibRefFromOCDB() ;
+ GetCalibRefFromOCDB();
}
//____________________________________________________________________________
//____________________________________________________________________________
void AliEMCALQADataMakerRec::MakeRaws(AliRawReader* rawReader)
{
- //Fill prepared histograms with Raw digit properties
+ // Check that all the reference histograms exist before we try to use them - otherwise call InitRaws
+ if (!fCalibRefHistoPro || !fCalibRefHistoH2F || !fLEDMonRefHistoPro || !fHighEmcHistoH2F) {
+ InitRaws();
+ }
// make sure EMCal was readout during the event
Int_t emcID = AliDAQ::DetectorID("EMCAL"); // bit 18..
Int_t towerId = iSM*nTowersPerSM + in.GetColumn()*nRows + in.GetRow();
if ( in.IsLowGain() ) {
nTotalSMLG[iSM]++;
- GetRawsData(kTowerLG)->Fill(towerId);
if ( (amp > fMinSignalLG) && (amp < fMaxSignalLG) ) {
GetRawsData(kSigLG)->Fill(towerId, amp);
GetRawsData(kTimeLG)->Fill(towerId, time);
} // gain==0
else if ( in.IsHighGain() ) {
nTotalSMHG[iSM]++;
- GetRawsData(kTowerHG)->Fill(towerId);
if ( (amp > fMinSignalHG) && (amp < fMaxSignalHG) ) {
GetRawsData(kSigHG)->Fill(towerId, amp);
GetRawsData(kTimeHG)->Fill(towerId, time);
// TProfile * p = dynamic_cast<TProfile *>(GetRawsData(kSigHG)) ;
ConvertProfile2H(dynamic_cast<TProfile *>(GetRawsData(kSigHG)), fHighEmcHistoH2F) ;
Double_t binContent = 0. ;
+
+ //reset ratio histograms
+ GetRawsData(k2DRatioAmp)->Reset("ICE");
+ GetRawsData(kRatioDist)->Reset("ICE");
+ GetRawsData(kLEDMonRatio)->Reset("ICE");
+ GetRawsData(kLEDMonRatioDist)->Reset("ICE");
+ GetRawsData(k2DRatioAmp)->ResetStats();
+ GetRawsData(kRatioDist)->ResetStats();
+ GetRawsData(kLEDMonRatio)->ResetStats();
+ GetRawsData(kLEDMonRatioDist)->ResetStats();
+
//calculate the ratio of the amplitude and fill the histograms, only if the events type is Calib
if (rawReader->GetType() == AliRawEventHeaderBase::kCalibrationEvent) {
- if(GetRawsData(k2DRatioAmp)->GetEntries())
- GetRawsData(k2DRatioAmp)->Reset("ICE");
- if(GetRawsData(kRatioDist)->GetEntries())
- GetRawsData(kRatioDist)->Reset("ICE");
- for(Int_t ix = 1; ix <= fHighEmcHistoH2F->GetNbinsX(); ix++) {
- for(Int_t iy = 1; iy <= fHighEmcHistoH2F->GetNbinsY(); iy++) {
- if(fCalibRefHistoH2F->GetBinContent(ix, iy))binContent = fHighEmcHistoH2F->GetBinContent(ix, iy)/fCalibRefHistoH2F->GetBinContent(ix, iy) ;
- GetRawsData(k2DRatioAmp)->SetBinContent(ix, iy, binContent);
- GetRawsData(kRatioDist)->Fill(GetRawsData(k2DRatioAmp)->GetBinContent(ix, iy));
- }
- }
+ for(Int_t ix = 1; ix <= fHighEmcHistoH2F->GetNbinsX(); ix++) {
+ for(Int_t iy = 1; iy <= fHighEmcHistoH2F->GetNbinsY(); iy++) {
+ if(fCalibRefHistoH2F->GetBinContent(ix, iy))binContent = fHighEmcHistoH2F->GetBinContent(ix, iy)/fCalibRefHistoH2F->GetBinContent(ix, iy) ;
+ GetRawsData(k2DRatioAmp)->SetBinContent(ix, iy, binContent);
+ GetRawsData(kRatioDist)->Fill(GetRawsData(k2DRatioAmp)->GetBinContent(ix, iy));
+ }
+ }
+
}
//Now for LED monitor system, to calculate the ratio as well
- if(fLEDMonRefHistoPro){
- GetRawsData(kLEDMonRatio)->Reset("ICE");
- GetRawsData(kLEDMonRatioDist)->Reset("ICE");
-
Double_t binError = 0. ;
+ // for the binError, we add the relative errors, squared
+ Double_t relativeErrorSqr = 0. ;
for(int ib = 1; ib <= fLEDMonRefHistoPro->GetNbinsX(); ib++) {
- if(fLEDMonRefHistoPro->GetBinContent(ib) != 0) binContent = GetRawsData(kSigLGLEDMon)->GetBinContent(ib) / fLEDMonRefHistoPro->GetBinContent(ib);
- else binContent = 0;
+ if(fLEDMonRefHistoPro->GetBinContent(ib) != 0) {
+ binContent = GetRawsData(kSigLGLEDMon)->GetBinContent(ib) / fLEDMonRefHistoPro->GetBinContent(ib);
+
+ relativeErrorSqr = TMath::Power( (fLEDMonRefHistoPro->GetBinError(ib) / fLEDMonRefHistoPro->GetBinContent(ib)), 2);
+ if(GetRawsData(kSigLGLEDMon)->GetBinContent(ib) != 0) {
+ relativeErrorSqr += TMath::Power( (GetRawsData(kSigLGLEDMon)->GetBinError(ib)/GetRawsData(kSigLGLEDMon)->GetBinContent(ib)), 2);
+ }
+ }
+ else {
+ binContent = 0;
+ relativeErrorSqr = 0;
+ }
GetRawsData(kLEDMonRatio)->SetBinContent(ib, binContent);
- binError = GetRawsData(kSigLGLEDMon)->GetBinError(ib)/fLEDMonRefHistoPro->GetBinContent(ib) +
- GetRawsData(kSigLGLEDMon)->GetBinContent(ib)/TMath::Power(fLEDMonRefHistoPro->GetBinContent(ib), 2)*fLEDMonRefHistoPro->GetBinError(ib);
+ binError = sqrt(relativeErrorSqr) * binContent;
GetRawsData(kLEDMonRatio)->SetBinError(ib, binError);
GetRawsData(kLEDMonRatioDist)->Fill(GetRawsData(kLEDMonRatio)->GetBinContent(ib));
}
- }
-
// let's also fill the SM and event counter histograms
{
// makes data from Digit Tree
if (fDigitsArray)
- fDigitsArray->Clear() ;
+ fDigitsArray->Clear("C") ;
else
fDigitsArray = new TClonesArray("AliEMCALDigit", 1000) ;
//_____________________________________________________________________________________
void AliEMCALQADataMakerRec::ConvertProfile2H(TProfile * p, TH2 * histo)
{
- // set some histogram defaults
- //histo->Reset() ;
- //histo->SetStats(kFALSE); // no statistics box shown
+ // reset histogram
+ histo->Reset("ICE") ;
+ histo->ResetStats();
+
Int_t nbinsProf = p->GetNbinsX();
// loop through the TProfile p and fill the TH2F histo
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff