* about the suitability of this software for any purpose. It is *
* provided "as is" without express or implied warranty. *
**************************************************************************/
- //////////////////////////////////////////////////////////////////////////////
-// //
-// Forward Multiplicity Detector based on Silicon plates //
-// This class contains the base procedures for the Forward Multiplicity //
-// detector //
-// Detector consists of 6 Si volumes covered pseudorapidity interval //
-// from 1.6 to 6.0. //
-// //
-//Begin_Html
-/*
-<img src="gif/AliFMDClass.gif">
-</pre>
-<br clear=left>
-<font size=+2 color=red>
-<p>The responsible person for this module is
-<a href="mailto:Alla.Maevskaia@cern.ch">Alla Maevskaia</a>.
-</font>
-<pre>
-*/
-//End_Html
-// //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-#include <TTUBE.h>
-#include <TNode.h>
-#include <TGeometry.h>
-#include <TTree.h>
-#include "AliRun.h"
-#include "AliMC.h"
-#include "AliFMD.h"
-#include "AliFMDhit.h"
+/* $Id$ */
+
+//____________________________________________________________________
+//
+// Forward Multiplicity Detector based on Silicon wafers. This class
+// contains the base procedures for the Forward Multiplicity detector
+// Detector consists of 3 sub-detectors FMD1, FMD2, and FMD3, each of
+// which has 1 or 2 rings of silicon sensors.
+//
+// This is the base class for all FMD manager classes.
+//
+// The actual code is done by various separate classes. Below is
+// diagram showing the relationship between the various FMD classes
+// that handles the simulation
+//
+//
+// +----------+ +----------+
+// | AliFMDv1 | | AliFMDv0 |
+// +----------+ +----------+
+// | | +-----------------+
+// +----+--------------+ +--| AliFMDDigitizer |
+// | | +-----------------+
+// | +---------------------+ |
+// | +--| AliFMDBaseDigitizer |<--+
+// V 1 | +---------------------+ |
+// +--------+<>--+ | +------------------+
+// | AliFMD | +--| AliFMDSDigitizer |
+// +--------+<>--+ +------------------+
+// 1 | +-----------------+
+// +--| AliFMDSimulator |
+// +-----------------+
+// ^
+// |
+// +-------------+-------------+
+// | |
+// +--------------------+ +-------------------+
+// | AliFMDGeoSimulator | | AliFMDG3Simulator |
+// +--------------------+ +-------------------+
+// ^ ^
+// | |
+// +-----------------------+ +----------------------+
+// | AliFMDGeoOldSimulator | | AliFMDG3OldSimulator |
+// +-----------------------+ +----------------------+
+//
+//
+// * AliFMD
+// This defines the interface for the various parts of AliROOT that
+// uses the FMD, like AliFMDSimulator, AliFMDDigitizer,
+// AliFMDReconstructor, and so on.
+//
+// * AliFMDv0
+// This is a concrete implementation of the AliFMD interface.
+// It is the responsibility of this class to create the FMD
+// geometry.
+//
+// * AliFMDv1
+// This is a concrete implementation of the AliFMD interface.
+// It is the responsibility of this class to create the FMD
+// geometry, process hits in the FMD, and serve hits and digits to
+// the various clients.
+//
+// * AliFMDSimulator
+// This is the base class for the FMD simulation tasks. The
+// simulator tasks are responsible to implment the geoemtry, and
+// process hits.
+//
+// * AliFMDGeoSimulator
+// This is a concrete implementation of the AliFMDSimulator that
+// uses the TGeo classes directly only.
+//
+// * AliFMDG3Simulator
+// This is a concrete implementation of the AliFMDSimulator that
+// uses the TVirtualMC interface with GEANT 3.21-like messages.
+//
+
+// These files are not in the same directory, so there's no reason to
+// ask the preprocessor to search in the current directory for these
+// files by including them with `#include "..."'
+#include <math.h> // __CMATH__
+#include <TClonesArray.h> // ROOT_TClonesArray
+#include <TGeometry.h> // ROOT_TGeomtry
+#include <TNode.h> // ROOT_TNode
+#include <TXTRU.h> // ROOT_TXTRU
+#include <TRotMatrix.h> // ROOT_TRotMatrix
+#include <TTUBE.h> // ROOT_TTUBE
+#include <TTree.h> // ROOT_TTree
+#include <TBrowser.h> // ROOT_TBrowser
+#include <TMath.h> // ROOT_TMath
+#include <TVirtualMC.h> // ROOT_TVirtualMC
+
+#include <AliRunDigitizer.h> // ALIRUNDIGITIZER_H
+#include <AliLoader.h> // ALILOADER_H
+#include <AliRun.h> // ALIRUN_H
+#include <AliMC.h> // ALIMC_H
+#include "AliMagF.h" // ALIMAGF_H
+#include <AliLog.h> // ALILOG_H
+#include "AliFMD.h" // ALIFMD_H
+#include "AliFMDDigit.h" // ALIFMDDIGIG_H
+#include "AliFMDHit.h" // ALIFMDHIT_H
+#include "AliFMDGeometry.h" // ALIFMDGEOMETRY_H
+#include "AliFMDDetector.h" // ALIFMDDETECTOR_H
+#include "AliFMDRing.h" // ALIFMDRING_H
+#include "AliFMDDigitizer.h" // ALIFMDDIGITIZER_H
+#ifdef USE_PRE_MOVE
+#include "AliFMDSimulator.h" // ALIFMDSIMULATOR_H
+#include "AliFMDG3Simulator.h" // ALIFMDG3SIMULATOR_H
+#include "AliFMDGeoSimulator.h" // ALIFMDGEOSIMULATOR_H
+#include "AliFMDG3OldSimulator.h" // ALIFMDG3OLDSIMULATOR_H
+#include "AliFMDGeoOldSimulator.h" // ALIFMDGEOOLDSIMULATOR_H
+#else
+#include "AliFMDGeometryBuilderSimple.h"
+#endif
+#include "AliFMDRawWriter.h" // ALIFMDRAWWRITER_H
+#include <TVector2.h>
+
+//____________________________________________________________________
ClassImp(AliFMD)
-
-//_____________________________________________________________________________
-AliFMD::AliFMD(): AliDetector()
+#if 0
+ ; // This is to keep Emacs from indenting the next line
+#endif
+
+//____________________________________________________________________
+AliFMD::AliFMD()
+ : AliDetector(),
+ fSDigits(0),
+ fNsdigits(0),
+ fDetailed(kTRUE),
+#ifdef USE_PRE_MOVE
+ fSimulator(0),
+#endif
+ fBad(0)
{
//
// Default constructor for class AliFMD
//
- fIshunt = 0;
+ AliDebug(10, "\tDefault CTOR");
+ fHits = 0;
+ fDigits = 0;
+ fIshunt = 0;
+ fUseOld = kFALSE;
+ fUseAssembly = kTRUE;
+ fBad = new TClonesArray("AliFMDHit");
}
-
-//_____________________________________________________________________________
+
+//____________________________________________________________________
+AliFMD::AliFMD(const AliFMD& other)
+ : AliDetector(other),
+ fSDigits(other.fSDigits),
+ fNsdigits(other.fNsdigits),
+ fDetailed(other.fDetailed),
+#ifdef USE_PRE_MOVE
+ fSimulator(other.fSimulator),
+#endif
+ fBad(other.fBad)
+{
+ // Copy constructor
+ fUseOld = other.fUseOld;
+ fUseAssembly = other.fUseAssembly;
+}
+
+//____________________________________________________________________
AliFMD::AliFMD(const char *name, const char *title)
- : AliDetector(name,title)
+ : AliDetector (name, title),
+ fSDigits(0),
+ fNsdigits(0),
+ fDetailed(kTRUE),
+#ifdef USE_PRE_MOVE
+ fSimulator(0),
+#endif
+ fBad(0)
{
//
// Standard constructor for Forward Multiplicity Detector
//
-
- //
- // Initialise Hit array
- fHits = new TClonesArray("AliFMDhit", 1000);
+ AliDebug(10, "\tStandard CTOR");
+ fUseOld = kFALSE;
+ fUseAssembly = kFALSE;
+ fBad = new TClonesArray("AliFMDHit");
- fIshunt = 0;
- fIdSens1 = 0;
+ // Initialise Hit array
+ HitsArray();
+ gAlice->GetMCApp()->AddHitList(fHits);
+ // (S)Digits for the detectors disk
+ DigitsArray();
+ SDigitsArray();
+
+ // CHC: What is this?
+ fIshunt = 0;
SetMarkerColor(kRed);
+ SetLineColor(kYellow);
}
-
-AliFMD::~AliFMD()
+//____________________________________________________________________
+AliFMD::~AliFMD ()
{
- delete fHits;
+ // Destructor for base class AliFMD
+ if (fHits) {
+ fHits->Delete();
+ delete fHits;
+ fHits = 0;
+ }
+ if (fDigits) {
+ fDigits->Delete();
+ delete fDigits;
+ fDigits = 0;
+ }
+ if (fSDigits) {
+ fSDigits->Delete();
+ delete fSDigits;
+ fSDigits = 0;
+ }
+ if (fBad) {
+ fBad->Delete();
+ delete fBad;
+ fBad = 0;
+ }
}
-//_____________________________________________________________________________
-void AliFMD::AddHit(Int_t track, Int_t *vol, Float_t *hits)
+
+//____________________________________________________________________
+AliFMD&
+AliFMD::operator=(const AliFMD& other)
{
- //
- // Add a hit to the list
- //
- TClonesArray &lhits = *fHits;
- new(lhits[fNhits++]) AliFMDhit(fIshunt,track,vol,hits);
+ // Assignment operator
+ AliDetector::operator=(other);
+ fSDigits = other.fSDigits;
+ fNsdigits = other.fNsdigits;
+ fDetailed = other.fDetailed;
+#ifdef USE_PRE_MOVE
+ fSimulator = other.fSimulator;
+#endif
+ fBad = other.fBad;
+ return *this;
}
-//_____________________________________________________________________________
-void AliFMD::BuildGeometry()
+
+//====================================================================
+//
+// GEometry ANd Traking
+//
+//____________________________________________________________________
+void
+AliFMD::CreateGeometry()
{
//
- // Build simple ROOT TNode geometry for event display
+ // Create the geometry of Forward Multiplicity Detector. The actual
+ // construction of the geometry is delegated to the class AliFMDRing
+ // and AliFMDSubDetector and the relevant derived classes.
+ //
+ // The flow of this member function is:
//
- TNode *node, *top;
- const int kColorFMD = 7;
+ // FOR rings fInner and fOuter DO
+ // AliFMDRing::Init();
+ // END FOR
+ //
+ // Set up hybrud card support (leg) volume shapes
+ //
+ // FOR rings fInner and fOuter DO
+ // AliFMDRing::SetupGeometry();
+ // END FOR
+ //
+ // FOR subdetectors fFMD1, fFMD2, and fFMD3 DO
+ // AliFMDSubDetector::SetupGeomtry();
+ // END FOR
+ //
+ // FOR subdetectors fFMD1, fFMD2, and fFMD3 DO
+ // AliFMDSubDetector::Geomtry();
+ // END FOR
//
- top=gAlice->GetGeometry()->GetNode("alice");
+#ifndef USE_PRE_MOVE
+ AliFMDGeometry* fmd = AliFMDGeometry::Instance();
+ if (fUseOld) fmd->SetBuilder(new AliFMDGeometryBuilderSimple(fDetailed));
+ fmd->SetDetailed(fDetailed);
+ fmd->UseAssembly(fUseAssembly);
+ fmd->Build();
+#else
+ if (!fSimulator) {
+ AliFatal("Simulator object not made yet!");
+ return;
+ }
+ fSimulator->DefineGeometry();
+#endif
+}
- // FMD define the different volumes
- new TRotMatrix("rot901","rot901", 90, 0, 90, 90, 180, 0);
+//____________________________________________________________________
+void AliFMD::CreateMaterials()
+{
+ // Define the materials and tracking mediums needed by the FMD
+ // simulation. These mediums are made by sending the messages
+ // AliMaterial, AliMixture, and AliMedium to the passed AliModule
+ // object module. The defined mediums are
+ //
+ // FMD Si$ Silicon (active medium in sensors)
+ // FMD C$ Carbon fibre (support cone for FMD3 and vacuum pipe)
+ // FMD Al$ Aluminium (honeycomb support plates)
+ // FMD PCB$ Printed Circuit Board (FEE board with VA1_3)
+ // FMD Chip$ Electronics chips (currently not used)
+ // FMD Air$ Air (Air in the FMD)
+ // FMD Plastic$ Plastic (Support legs for the hybrid cards)
+ //
+ // Pointers to TGeoMedium objects are retrived from the TGeoManager
+ // singleton. These pointers are later used when setting up the
+ // geometry
+ AliDebug(10, "\tCreating materials");
+ // Get pointer to geometry singleton object.
+ AliFMDGeometry* geometry = AliFMDGeometry::Instance();
+ geometry->Init();
+#if 0
+ if (gGeoManager && gGeoManager->GetMedium("FMD Si$")) {
+ // We need to figure out the some stuff about the geometry
+ fmd->ExtractGeomInfo();
+ return;
+ }
+#endif
+#ifndef USE_PRE_MOVE
+ Int_t id;
+ Double_t a = 0;
+ Double_t z = 0;
+ Double_t density = 0;
+ Double_t radiationLength = 0;
+ Double_t absorbtionLength = 999;
+ Int_t fieldType = gAlice->Field()->Integ(); // Field type
+ Double_t maxField = gAlice->Field()->Max(); // Field max.
+ Double_t maxBending = 0; // Max Angle
+ Double_t maxStepSize = 0.001; // Max step size
+ Double_t maxEnergyLoss = 1; // Max Delta E
+ Double_t precision = 0.001; // Precision
+ Double_t minStepSize = 0.001; // Minimum step size
+
+ // Silicon
+ a = 28.0855;
+ z = 14.;
+ density = geometry->GetSiDensity();
+ radiationLength = 9.36;
+ maxBending = 1;
+ maxStepSize = .001;
+ precision = .001;
+ minStepSize = .001;
+ id = kSiId;
+ AliMaterial(id, "Si$", a, z, density, radiationLength, absorbtionLength);
+ AliMedium(kSiId, "Si$", id,1,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+
- new TTUBE("S_FMD0","FMD volume 0","void",4.73,17.7,1.5);
- top->cd();
- node = new TNode("FMD0","FMD0","S_FMD0",0,0,64,"");
- node->SetLineColor(kColorFMD);
- fNodes->Add(node);
+ // Carbon
+ a = 12.011;
+ z = 6.;
+ density = 2.265;
+ radiationLength = 18.8;
+ maxBending = 10;
+ maxStepSize = .01;
+ precision = .003;
+ minStepSize = .003;
+ id = kCarbonId;
+ AliMaterial(id, "Carbon$", a, z, density, radiationLength, absorbtionLength);
+ AliMedium(kCarbonId, "Carbon$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
- new TTUBE("S_FMD1","FMD volume 1","void",23.4,36.,1.5);
- top->cd();
- node = new TNode("FMD1","FMD1","S_FMD1",0,0,85,"");
- node->SetLineColor(kColorFMD);
- fNodes->Add(node);
+ // Aluminum
+ a = 26.981539;
+ z = 13.;
+ density = 2.7;
+ radiationLength = 8.9;
+ id = kAlId;
+ AliMaterial(id, "Aluminum$",a,z, density, radiationLength, absorbtionLength);
+ AliMedium(kAlId, "Aluminum$", id, 0, fieldType, maxField, maxBending,
+ maxStepSize, maxEnergyLoss, precision, minStepSize);
+
+
+ // Copper
+ a = 63.546;
+ z = 29;
+ density = 8.96;
+ radiationLength = 1.43;
+ id = kCopperId;
+ AliMaterial(id, "Copper$",
+ a, z, density, radiationLength, absorbtionLength);
+ AliMedium(kCopperId, "Copper$", id, 0, fieldType, maxField, maxBending,
+ maxStepSize, maxEnergyLoss, precision, minStepSize);
- new TTUBE("S_FMD2","FMD volume 2","void",4.73,17.7,1.5);
- top->cd();
- node = new TNode("FMD2","FMD2","S_FMD2",0,0,-64,"");
- node->SetLineColor(kColorFMD);
- fNodes->Add(node);
- new TTUBE("S_FMD3","FMD volume 3","void",23.4,36.,1.5);
- top->cd();
- node = new TNode("FMD3","FMD3","S_FMD3",0,0,-85,"");
- node->SetLineColor(kColorFMD);
- fNodes->Add(node);
+ // Silicon chip
+ {
+ Float_t as[] = { 12.0107, 14.0067, 15.9994,
+ 1.00794, 28.0855, 107.8682 };
+ Float_t zs[] = { 6., 7., 8.,
+ 1., 14., 47. };
+ Float_t ws[] = { 0.039730642, 0.001396798, 0.01169634,
+ 0.004367771, 0.844665, 0.09814344903 };
+ density = 2.36436;
+ maxBending = 10;
+ maxStepSize = .01;
+ precision = .003;
+ minStepSize = .003;
+ id = kSiChipId;
+ AliMixture(id, "Si Chip$", as, zs, density, 6, ws);
+ AliMedium(kSiChipId, "Si Chip$", id, 0, fieldType, maxField, maxBending,
+ maxStepSize, maxEnergyLoss, precision, minStepSize);
+ }
+
+ // Kaption
+ {
+ Float_t as[] = { 1.00794, 12.0107, 14.010, 15.9994};
+ Float_t zs[] = { 1., 6., 7., 8.};
+ Float_t ws[] = { 0.026362, 0.69113, 0.07327, 0.209235};
+ density = 1.42;
+ maxBending = 1;
+ maxStepSize = .001;
+ precision = .001;
+ minStepSize = .001;
+ id = kKaptonId;
+ AliMixture(id, "Kaption$", as, zs, density, 4, ws);
+ AliMedium(kKaptonId, "Kaption$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+ }
- new TTUBE("S_FMD4","FMD volume 4","void",5,15,0.015);
- top->cd();
- node = new TNode("FMD4","FMD4","S_FMD4",0,0,-270,"");
- node->SetLineColor(kColorFMD);
- fNodes->Add(node);
+ // Air
+ {
+ Float_t as[] = { 12.0107, 14.0067, 15.9994, 39.948 };
+ Float_t zs[] = { 6., 7., 8., 18. };
+ Float_t ws[] = { 0.000124, 0.755267, 0.231781, 0.012827 };
+ density = .00120479;
+ maxBending = 1;
+ maxStepSize = .001;
+ precision = .001;
+ minStepSize = .001;
+ id = kAirId;
+ AliMixture(id, "Air$", as, zs, density, 4, ws);
+ AliMedium(kAirId, "Air$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+ }
+ // PCB
+ {
+ Float_t zs[] = { 14., 20., 13., 12.,
+ 5., 22., 11., 19.,
+ 26., 9., 8., 6.,
+ 7., 1.};
+ Float_t as[] = { 28.0855, 40.078, 26.981538, 24.305,
+ 10.811, 47.867, 22.98977, 39.0983,
+ 55.845, 18.9984, 15.9994, 12.0107,
+ 14.0067, 1.00794};
+ Float_t ws[] = { 0.15144894, 0.08147477, 0.04128158, 0.00904554,
+ 0.01397570, 0.00287685, 0.00445114, 0.00498089,
+ 0.00209828, 0.00420000, 0.36043788, 0.27529426,
+ 0.01415852, 0.03427566};
+ density = 1.8;
+ maxBending = 1;
+ maxStepSize = .001;
+ precision = .001;
+ minStepSize = .001;
+ id = kPcbId;
+ AliMixture(id, "PCB$", as, zs, density, 14, ws);
+ AliMedium(kPcbId, "PCB$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+ }
- new TTUBE("S_FMD5","FMD volume 5","void",5,14,0.015);
- top->cd();
- node = new TNode("FMD5","FMD5","S_FMD5",0,0,-630,"");
- node->SetLineColor(kColorFMD);
- fNodes->Add(node);
+ // Plastic
+ {
+ Float_t as[] = { 1.01, 12.01 };
+ Float_t zs[] = { 1., 6. };
+ Float_t ws[] = { 1., 1. };
+ density = 1.03;
+ maxBending = 10;
+ maxStepSize = .01;
+ precision = .003;
+ minStepSize = .003;
+ id = kPlasticId;
+ AliMixture(id, "Plastic$", as, zs, density, -2, ws);
+ AliMedium(kPlasticId, "Plastic$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+ }
+#else
+ AliDebug(10, "\tCreating materials");
+
+ if (fSimulator) {
+ AliFatal("Simulator object already instantised!");
+ return;
+ }
+ TVirtualMC* mc = TVirtualMC::GetMC();
+ Bool_t geo = mc->IsRootGeometrySupported();
+ if (geo) {
+ if (fUseOld)
+ fSimulator = new AliFMDGeoOldSimulator(this, fDetailed);
+ else
+ fSimulator = new AliFMDGeoSimulator(this, fDetailed);
+ }
+ else {
+ if (fUseOld)
+ fSimulator = new AliFMDG3OldSimulator(this, fDetailed);
+ else
+ fSimulator = new AliFMDG3Simulator(this, fDetailed);
+ }
+ AliDebug(1, Form("using a %s as simulation backend",
+ fSimulator->IsA()->GetName()));
+ fSimulator->SetDetailed(fDetailed);
+ fSimulator->UseAssembly(fUseAssembly);
+ fSimulator->DefineMaterials();
+#endif
}
-
-//_____________________________________________________________________________
-Int_t AliFMD::DistanceToPrimitive(Int_t px, Int_t py)
+
+//____________________________________________________________________
+void
+AliFMD::Init()
+{}
+
+//____________________________________________________________________
+void
+AliFMD::FinishEvent()
+{
+#ifndef USE_PRE_MOVE
+ if (fBad && fBad->GetEntries() > 0) {
+ AliWarning((Form("EndEvent", "got %d 'bad' hits", fBad->GetEntries())));
+ TIter next(fBad);
+ AliFMDHit* hit;
+ while ((hit = static_cast<AliFMDHit*>(next())))
+ hit->Print("D");
+ fBad->Clear();
+ }
+#else
+ if (fSimulator) fSimulator->EndEvent();
+#endif
+}
+
+
+//====================================================================
+//
+// Graphics and event display
+//
+//____________________________________________________________________
+void
+AliFMD::BuildGeometry()
+{
+ //
+ // Build simple ROOT TNode geometry for event display
+ //
+ // Build a simplified geometry of the FMD used for event display
+ //
+ // The actual building of the TNodes is done by
+ // AliFMDSubDetector::SimpleGeometry.
+ AliDebug(10, "\tCreating a simplified geometry");
+
+ AliFMDGeometry* fmd = AliFMDGeometry::Instance();
+
+ static TXTRU* innerShape = 0;
+ static TXTRU* outerShape = 0;
+ static TObjArray* innerRot = 0;
+ static TObjArray* outerRot = 0;
+
+ if (!innerShape || !outerShape) {
+ // Make the shapes for the modules
+ for (Int_t i = 0; i < 2; i++) {
+ AliFMDRing* r = 0;
+ switch (i) {
+ case 0: r = fmd->GetRing('I'); break;
+ case 1: r = fmd->GetRing('O'); break;
+ }
+ if (!r) {
+ AliError(Form("no ring found for i=%d", i));
+ return;
+ }
+ Double_t siThick = r->GetSiThickness();
+ const Int_t nv = r->GetNVerticies();
+ Double_t theta = r->GetTheta();
+ Int_t nmod = r->GetNModules();
+
+ TXTRU* shape = new TXTRU(r->GetName(), r->GetTitle(), "void", nv, 2);
+ for (Int_t j = 0; j < nv; j++) {
+ TVector2* vv = r->GetVertex(nv - 1 - j);
+ shape->DefineVertex(j, vv->X(), vv->Y());
+ }
+ shape->DefineSection(0, -siThick / 2, 1, 0, 0);
+ shape->DefineSection(1, +siThick / 2, 1, 0, 0);
+ shape->SetLineColor(GetLineColor());
+
+ TObjArray* rots = new TObjArray(nmod);
+ for (Int_t j = 0; j < nmod; j++) {
+ Double_t th = (j + .5) * theta * 2;
+ TString name(Form("FMD_ring_%c_rot_%02d", r->GetId(), j));
+ TString title(Form("FMD Ring %c Rotation # %d", r->GetId(), j));
+ TRotMatrix* rot = new TRotMatrix(name.Data(), title.Data(),
+ 90, th, 90, fmod(90+th,360), 0, 0);
+ rots->AddAt(rot, j);
+ }
+
+ switch (r->GetId()) {
+ case 'i':
+ case 'I': innerShape = shape; innerRot = rots; break;
+ case 'o':
+ case 'O': outerShape = shape; outerRot = rots; break;
+ }
+ }
+ }
+
+ TNode* top = gAlice->GetGeometry()->GetNode("alice");
+
+ for (Int_t i = 1; i <= 3; i++) {
+ AliFMDDetector* det = fmd->GetDetector(i);
+ if (!det) {
+ Warning("BuildGeometry", "FMD%d seems to be disabled", i);
+ continue;
+ }
+ Double_t w = 0;
+ Double_t rh = det->GetRing('I')->GetHighR();
+ Char_t id = 'I';
+ if (det->GetRing('O')) {
+ w = TMath::Abs(det->GetRingZ('O') - det->GetRingZ('I'));
+ id = (TMath::Abs(det->GetRingZ('O'))
+ > TMath::Abs(det->GetRingZ('I')) ? 'O' : 'I');
+ rh = det->GetRing('O')->GetHighR();
+ }
+ w += (det->GetRing(id)->GetModuleSpacing() +
+ det->GetRing(id)->GetSiThickness());
+ TShape* shape = new TTUBE(det->GetName(), det->GetTitle(), "void",
+ det->GetRing('I')->GetLowR(), rh, w / 2);
+ Double_t z = (det->GetRingZ('I') - w / 2);
+ if (z > 0) z += det->GetRing(id)->GetModuleSpacing();
+ top->cd();
+ TNode* node = new TNode(det->GetName(), det->GetTitle(), shape,
+ 0, 0, z, 0);
+ fNodes->Add(node);
+
+ for (Int_t j = 0; j < 2; j++) {
+ AliFMDRing* r = 0;
+ TShape* rshape = 0;
+ TObjArray* rots = 0;
+ switch (j) {
+ case 0:
+ r = det->GetRing('I'); rshape = innerShape; rots = innerRot; break;
+ case 1:
+ r = det->GetRing('O'); rshape = outerShape; rots = outerRot; break;
+ }
+ if (!r) continue;
+
+ Double_t siThick = r->GetSiThickness();
+ Int_t nmod = r->GetNModules();
+ Double_t modspace = r->GetModuleSpacing();
+ Double_t rz = - (z - det->GetRingZ(r->GetId()));
+
+ for (Int_t k = 0; k < nmod; k++) {
+ node->cd();
+ Double_t offz = (k % 2 == 1 ? modspace : 0);
+ TRotMatrix* rot = static_cast<TRotMatrix*>(rots->At(k));
+ TString name(Form("%s%c_module_%02d", det->GetName(), r->GetId(),k));
+ TString title(Form("%s%c Module %d", det->GetName(), r->GetId(),k));
+ TNode* mnod = new TNode(name.Data(), title.Data(), rshape,
+ 0, 0, rz - siThick / 2
+ + TMath::Sign(offz,z), rot);
+ mnod->SetLineColor(GetLineColor());
+ fNodes->Add(mnod);
+ } // for (Int_t k = 0 ; ...)
+ } // for (Int_t j = 0 ; ...)
+ } // for (Int_t i = 1 ; ...)
+}
+
+//____________________________________________________________________
+void
+AliFMD::DrawDetector()
+{
+ //
+ // Draw a shaded view of the Forward multiplicity detector
+ //
+ // DebugGuard guard("AliFMD::DrawDetector");
+ AliDebug(10, "\tDraw detector");
+
+#if 0
+ //Set ALIC mother transparent
+ gMC->Gsatt("ALIC","SEEN",0);
+ //
+ gMC->Gdopt("hide", "on");
+ gMC->Gdopt("shad", "on");
+ gMC->Gsatt("*", "fill", 7);
+ gMC->SetClipBox(".");
+ gMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000);
+ gMC->DefaultRange();
+ gMC->Gdraw("alic", 40, 30, 0, 12, 12, .055, .055);
+ gMC->Gdhead(1111, "Forward Multiplicity Detector");
+ gMC->Gdman(16, 10, "MAN");
+ gMC->Gdopt("hide", "off");
+#endif
+}
+
+//____________________________________________________________________
+Int_t
+AliFMD::DistanceToPrimitive(Int_t, Int_t)
{
//
// Calculate the distance from the mouse to the FMD on the screen
//
return 9999;
}
-
-//_____________________________________________________________________________
-//-------------------------------------------------------------------------
-void AliFMD::Init()
+//====================================================================
+//
+// Hit and Digit managment
+//
+//____________________________________________________________________
+void
+AliFMD::MakeBranch(Option_t * option)
+{
+ // Create Tree branches for the FMD.
+ //
+ // Options:
+ //
+ // H Make a branch of TClonesArray of AliFMDHit's
+ // D Make a branch of TClonesArray of AliFMDDigit's
+ // S Make a branch of TClonesArray of AliFMDSDigit's
+ //
+ const Int_t kBufferSize = 16000;
+ TString branchname(GetName());
+ TString opt(option);
+
+ if (opt.Contains("H", TString::kIgnoreCase)) {
+ HitsArray();
+ AliDetector::MakeBranch(option);
+ }
+ if (opt.Contains("D", TString::kIgnoreCase)) {
+ DigitsArray();
+ MakeBranchInTree(fLoader->TreeD(), branchname.Data(),
+ &fDigits, kBufferSize, 0);
+ }
+ if (opt.Contains("S", TString::kIgnoreCase)) {
+ SDigitsArray();
+ MakeBranchInTree(fLoader->TreeS(), branchname.Data(),
+ &fSDigits, kBufferSize, 0);
+ }
+}
+
+//____________________________________________________________________
+void
+AliFMD::SetTreeAddress()
+{
+ // Set branch address for the Hits, Digits, and SDigits Tree.
+ if (fLoader->TreeH()) HitsArray();
+ AliDetector::SetTreeAddress();
+
+ TTree *treeD = fLoader->TreeD();
+ if (treeD) {
+ DigitsArray();
+ TBranch* branch = treeD->GetBranch ("FMD");
+ if (branch) branch->SetAddress(&fDigits);
+ }
+
+ TTree *treeS = fLoader->TreeS();
+ if (treeS) {
+ SDigitsArray();
+ TBranch* branch = treeS->GetBranch ("FMD");
+ if (branch) branch->SetAddress(&fSDigits);
+ }
+}
+
+
+
+//____________________________________________________________________
+void
+AliFMD::SetHitsAddressBranch(TBranch *b)
+{
+ // Set the TClonesArray to read hits into.
+ b->SetAddress(&fHits);
+}
+
+//____________________________________________________________________
+void
+AliFMD::AddHit(Int_t track, Int_t *vol, Float_t *hits)
+{
+ // Add a hit to the hits tree
+ //
+ // The information of the two arrays are decoded as
+ //
+ // Parameters
+ // track Track #
+ // ivol[0] [UShort_t ] Detector #
+ // ivol[1] [Char_t ] Ring ID
+ // ivol[2] [UShort_t ] Sector #
+ // ivol[3] [UShort_t ] Strip #
+ // hits[0] [Float_t ] Track's X-coordinate at hit
+ // hits[1] [Float_t ] Track's Y-coordinate at hit
+ // hits[3] [Float_t ] Track's Z-coordinate at hit
+ // hits[4] [Float_t ] X-component of track's momentum
+ // hits[5] [Float_t ] Y-component of track's momentum
+ // hits[6] [Float_t ] Z-component of track's momentum
+ // hits[7] [Float_t ] Energy deposited by track
+ // hits[8] [Int_t ] Track's particle Id #
+ // hits[9] [Float_t ] Time when the track hit
+ //
+ //
+ AddHitByFields(track,
+ UShort_t(vol[0]), // Detector #
+ Char_t(vol[1]), // Ring ID
+ UShort_t(vol[2]), // Sector #
+ UShort_t(vol[3]), // Strip #
+ hits[0], // X
+ hits[1], // Y
+ hits[2], // Z
+ hits[3], // Px
+ hits[4], // Py
+ hits[5], // Pz
+ hits[6], // Energy loss
+ Int_t(hits[7]), // PDG
+ hits[8]); // Time
+}
+
+//____________________________________________________________________
+AliFMDHit*
+AliFMD::AddHitByFields(Int_t track,
+ UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ Float_t x,
+ Float_t y,
+ Float_t z,
+ Float_t px,
+ Float_t py,
+ Float_t pz,
+ Float_t edep,
+ Int_t pdg,
+ Float_t t,
+ Float_t l,
+ Bool_t stop)
{
//
- // Initialis the FMD after it has been built
- Int_t i;
- AliMC* pMC = AliMC::GetMC();
+ // Add a hit to the list
//
- printf("\n");
- for(i=0;i<35;i++) printf("*");
- printf(" FMD_INIT ");
- for(i=0;i<35;i++) printf("*");
- printf("\n");
+ // Parameters:
+ //
+ // track Track #
+ // detector Detector # (1, 2, or 3)
+ // ring Ring ID ('I' or 'O')
+ // sector Sector # (For inner/outer rings: 0-19/0-39)
+ // strip Strip # (For inner/outer rings: 0-511/0-255)
+ // x Track's X-coordinate at hit
+ // y Track's Y-coordinate at hit
+ // z Track's Z-coordinate at hit
+ // px X-component of track's momentum
+ // py Y-component of track's momentum
+ // pz Z-component of track's momentum
+ // edep Energy deposited by track
+ // pdg Track's particle Id #
+ // t Time when the track hit
+ // l Track length through the material.
+ // stop Whether track was stopped or disappeared
+ //
+ TClonesArray& a = *(HitsArray());
+ // Search through the list of already registered hits, and see if we
+ // find a hit with the same parameters. If we do, then don't create
+ // a new hit, but rather update the energy deposited in the hit.
+ // This is done, so that a FLUKA based simulation will get the
+ // number of hits right, not just the enerrgy deposition.
+ AliFMDHit* hit = 0;
+ for (Int_t i = 0; i < fNhits; i++) {
+ if (!a.At(i)) continue;
+ hit = static_cast<AliFMDHit*>(a.At(i));
+ if (hit->Detector() == detector
+ && hit->Ring() == ring
+ && hit->Sector() == sector
+ && hit->Strip() == strip
+ && hit->Track() == track) {
+ Warning("AddHit", "already had a hit in FMD%d%c[%2d,%3d] for track # %d,"
+ " adding energy (%f) to that hit (%f) -> %f",
+ detector, ring, sector, strip, track, edep, hit->Edep(),
+ hit->Edep() + edep);
+ hit->SetEdep(hit->Edep() + edep);
+ return hit;
+ }
+ }
+ // If hit wasn't already registered, do so know.
+ hit = new (a[fNhits]) AliFMDHit(fIshunt, track, detector, ring, sector,
+ strip, x, y, z, px, py, pz, edep, pdg, t,
+ l, stop);
+ fNhits++;
+ return hit;
+}
+
+//____________________________________________________________________
+void
+AliFMD::AddDigit(Int_t* digits, Int_t*)
+{
+ // Add a digit to the Digit tree
+ //
+ // Paramters
//
- // Here the FMD initialisation code (if any!)
- for(i=0;i<80;i++) printf("*");
- printf("\n");
- //
- //
- fIdSens1=pMC->VolId("GFSI"); //Si sensetive volume
+ // digits[0] [UShort_t] Detector #
+ // digits[1] [Char_t] Ring ID
+ // digits[2] [UShort_t] Sector #
+ // digits[3] [UShort_t] Strip #
+ // digits[4] [UShort_t] ADC Count
+ // digits[5] [Short_t] ADC Count, -1 if not used
+ // digits[6] [Short_t] ADC Count, -1 if not used
+ //
+ AddDigitByFields(UShort_t(digits[0]), // Detector #
+ Char_t(digits[1]), // Ring ID
+ UShort_t(digits[2]), // Sector #
+ UShort_t(digits[3]), // Strip #
+ UShort_t(digits[4]), // ADC Count1
+ Short_t(digits[5]), // ADC Count2
+ Short_t(digits[6])); // ADC Count3
+}
+//____________________________________________________________________
+void
+AliFMD::AddDigitByFields(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ UShort_t count1,
+ Short_t count2,
+ Short_t count3)
+{
+ // add a real digit - as coming from data
+ //
+ // Parameters
+ //
+ // detector Detector # (1, 2, or 3)
+ // ring Ring ID ('I' or 'O')
+ // sector Sector # (For inner/outer rings: 0-19/0-39)
+ // strip Strip # (For inner/outer rings: 0-511/0-255)
+ // count1 ADC count (a 10-bit word)
+ // count2 ADC count (a 10-bit word), or -1 if not used
+ // count3 ADC count (a 10-bit word), or -1 if not used
+ TClonesArray& a = *(DigitsArray());
+
+ new (a[fNdigits++])
+ AliFMDDigit(detector, ring, sector, strip, count1, count2, count3);
}
-//---------------------------------------------------------------------
-void AliFMD::MakeBranch(Option_t* option)
+
+//____________________________________________________________________
+void
+AliFMD::AddSDigit(Int_t* digits)
{
- // Create Tree branches for the FMD.
- Int_t buffersize = 4000;
- char branchname[10];
- sprintf(branchname,"%s",GetName());
+ // Add a digit to the SDigit tree
+ //
+ // Paramters
+ //
+ // digits[0] [UShort_t] Detector #
+ // digits[1] [Char_t] Ring ID
+ // digits[2] [UShort_t] Sector #
+ // digits[3] [UShort_t] Strip #
+ // digits[4] [Float_t] Total energy deposited
+ // digits[5] [UShort_t] ADC Count
+ // digits[6] [Short_t] ADC Count, -1 if not used
+ // digits[7] [Short_t] ADC Count, -1 if not used
+ //
+ AddSDigitByFields(UShort_t(digits[0]), // Detector #
+ Char_t(digits[1]), // Ring ID
+ UShort_t(digits[2]), // Sector #
+ UShort_t(digits[3]), // Strip #
+ Float_t(digits[4]), // Edep
+ UShort_t(digits[5]), // ADC Count1
+ Short_t(digits[6]), // ADC Count2
+ Short_t(digits[7])); // ADC Count3
+}
+
+//____________________________________________________________________
+void
+AliFMD::AddSDigitByFields(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ Float_t edep,
+ UShort_t count1,
+ Short_t count2,
+ Short_t count3)
+{
+ // add a summable digit
+ //
+ // Parameters
+ //
+ // detector Detector # (1, 2, or 3)
+ // ring Ring ID ('I' or 'O')
+ // sector Sector # (For inner/outer rings: 0-19/0-39)
+ // strip Strip # (For inner/outer rings: 0-511/0-255)
+ // edep Total energy deposited
+ // count1 ADC count (a 10-bit word)
+ // count2 ADC count (a 10-bit word), or -1 if not used
+ // count3 ADC count (a 10-bit word), or -1 if not used
+ //
+ TClonesArray& a = *(SDigitsArray());
+
+ new (a[fNsdigits++])
+ AliFMDSDigit(detector, ring, sector, strip, edep, count1, count2, count3);
+}
+
+//____________________________________________________________________
+void
+AliFMD::ResetSDigits()
+{
+ //
+ // Reset number of digits and the digits array for this detector
+ //
+ fNsdigits = 0;
+ if (fSDigits) fSDigits->Clear();
+}
- AliDetector::MakeBranch(option);
- if (fDigits && gAlice->TreeD()) {
- gAlice->TreeD()->Branch(branchname,&fDigits, buffersize);
- printf("Making Branch %s for digits\n",branchname);
+//____________________________________________________________________
+TClonesArray*
+AliFMD::HitsArray()
+{
+ // Initialize hit array if not already, and return pointer to it.
+ if (!fHits) {
+ fHits = new TClonesArray("AliFMDHit", 1000);
+ fNhits = 0;
}
+ return fHits;
}
-
-//---------------------------------------------------------------------
-void AliFMD::Eta2Radius(Float_t eta, Float_t zDisk, Float_t *radius)
+//____________________________________________________________________
+TClonesArray*
+AliFMD::DigitsArray()
{
- Float_t expEta=TMath::Exp(-eta);
- Float_t theta=TMath::ATan(expEta);
- theta=2.*theta;
- Float_t rad=zDisk*(TMath::Tan(theta));
- *radius=rad;
-
- printf(" eta %f radius %f\n", eta, rad);
+ // Initialize digit array if not already, and return pointer to it.
+ if (!fDigits) {
+ fDigits = new TClonesArray("AliFMDDigit", 1000);
+ fNdigits = 0;
+ }
+ return fDigits;
}
-
-
-
-
+//____________________________________________________________________
+TClonesArray*
+AliFMD::SDigitsArray()
+{
+ // Initialize digit array if not already, and return pointer to it.
+ if (!fSDigits) {
+ fSDigits = new TClonesArray("AliFMDSDigit", 1000);
+ fNsdigits = 0;
+ }
+ return fSDigits;
+}
+
+//====================================================================
+//
+// Digitization
+//
+//____________________________________________________________________
+void
+AliFMD::Hits2Digits()
+{
+ // Create AliFMDDigit's from AliFMDHit's. This is done by making a
+ // AliFMDDigitizer, and executing that code.
+ //
+ Warning("Hits2Digits", "Try not to use this method.\n"
+ "Instead, use AliSimulator");
+ AliRunDigitizer* manager = new AliRunDigitizer(1, 1);
+ manager->SetInputStream(0, "galice.root");
+ manager->SetOutputFile("H2Dfile");
+
+ /* AliDigitizer* dig =*/ CreateDigitizer(manager);
+ manager->Exec("");
+ delete manager;
+}
+
+//____________________________________________________________________
+void
+AliFMD::Hits2SDigits()
+{
+ // Create AliFMDSDigit's from AliFMDHit's. This is done by creating
+ // an AliFMDSDigitizer object, and executing it.
+ //
+ AliFMDSDigitizer* digitizer = new AliFMDSDigitizer("galice.root");
+ digitizer->Exec("");
+ delete digitizer;
+}
+
+
+//____________________________________________________________________
+AliDigitizer*
+AliFMD::CreateDigitizer(AliRunDigitizer* manager) const
+{
+ // Create a digitizer object
+ AliFMDDigitizer* digitizer = new AliFMDDigitizer(manager);
+ return digitizer;
+}
+
+//====================================================================
+//
+// Raw data simulation
+//
+//__________________________________________________________________
+void
+AliFMD::Digits2Raw()
+{
+ // Turn digits into raw data.
+ //
+ // This uses the class AliFMDRawWriter to do the job. Please refer
+ // to that class for more information.
+ AliFMDRawWriter writer(this);
+ writer.Exec();
+}
+
+
+//====================================================================
+//
+// Utility
+//
+//__________________________________________________________________
+void
+AliFMD::Browse(TBrowser* b)
+{
+ // Browse this object.
+ //
+ AliDebug(30, "\tBrowsing the FMD");
+ AliDetector::Browse(b);
+#ifdef USE_PRE_MOVE
+ if (fSimulator) b->Add(fSimulator);
+#endif
+ b->Add(AliFMDGeometry::Instance());
+}
+
+//___________________________________________________________________
+//
+// EOF
+//