* provided "as is" without express or implied warranty. *
**************************************************************************/
-/*
-$Log$
-Revision 1.8 2000/10/02 21:28:07 fca
-Removal of useless dependecies via forward declarations
-
-Revision 1.7 2000/01/19 17:16:47 fca
-Introducing a list of lists of hits -- more hits allowed for detector now
-
-Revision 1.6 1999/09/29 09:24:14 fca
-Introduction of the Copyright and cvs Log
-
-*/
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Forward Multiplicity Detector //
-// This class contains the base procedures for the Forward Multiplicity //
-// detector //
-// //
-//Begin_Html
-/*
-<img src="picts/AliFMDClass.gif">
-</pre>
-<br clear=left>
-<font size=+2 color=red>
-<p>The responsible person for this module is
-<a href="mailto:Valeri.Kondratiev@cern.ch">Valeri Kondratiev</a>.
-</font>
-<pre>
-*/
-//End_Html
-// //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-#include <TTUBE.h>
-#include <TNode.h>
-#include <TGeometry.h>
-#include <TLorentzVector.h>
-
-#include "AliMC.h"
-#include "AliRun.h"
-#include "AliFMD.h"
-
-ClassImp(AliFMD)
-
-//_____________________________________________________________________________
-AliFMD::AliFMD(): AliDetector()
+/* $Id$ */
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// Forward Multiplicity Detector based on Silicon wafers. This class
+// contains the base procedures for the Forward Multiplicity detector
+// Detector consists of 5 Si volumes covered pseudorapidity interval
+// from 1.7 to 5.1.
+//
+// This is the base class for all FMD manager classes.
+//
+// The actual code is done by various separate classes. Below is
+// diagram showing the relationship between the various FMD classes
+// that handles the geometry
+//
+//
+// +----------+ +----------+
+// | AliFMDv1 | | AliFMDv1 |
+// +----------+ +----------+
+// | |
+// +----+--------------+
+// |
+// | +------------+ 1 +---------------+
+// | +- | AliFMDRing |<>--| AliFMDPolygon |
+// V 2 | +------------+ +---------------+
+// +--------+<>--+ |
+// | AliFMD | ^
+// +--------+<>--+ V 1..2
+// 3 | +-------------------+
+// +-| AliFMDSubDetector |
+// +-------------------+
+// ^
+// |
+// +-------------+-------------+
+// | | |
+// +---------+ +---------+ +---------+
+// | AliFMD1 | | AliFMD2 | | AliFMD3 |
+// +---------+ +---------+ +---------+
+//
+//
+// * AliFMD
+// This defines the interface for the various parts of AliROOT that
+// uses the FMD, like AliFMDDigitizer, AliFMDReconstructor, and so
+// on.
+//
+// * AliFMDv1
+// This is a concrete implementation of the AliFMD interface.
+// It is the responsibility of this class to create the FMD
+// geometry, process hits in the FMD, and serve hits and digits to
+// the various clients.
+//
+// It uses the objects of class AliFMDSubDetector to do the various
+// stuff for FMD1, 2, and 3
+//
+// * AliFMDRing
+// This class contains all stuff needed to do with a ring. It's
+// used by the AliFMDSubDetector objects to instantise inner and
+// outer rings. The AliFMDRing objects are shared by the
+// AliFMDSubDetector objects, and owned by the AliFMDv1 object.
+//
+// * AliFMDPolygon
+// The code I lifted from TGeoPolygon to help with the geometry of
+// the modules, as well as to decide wether a hit is actually with
+// in the real module shape. The point is, that the shape of the
+// various ring modules are really polygons (much like the lid of a
+// coffin), but it's segmented at constant radius. That is very
+// hard to implement using GEANT 3.21 shapes, so instead the
+// modules are implemented as TUBS (tube sections), and in the step
+// procedure we do the test whether the track was inside the real
+// shape of the module.
+//
+// * AliFMD1, AliFMD2, and AliFMD3
+// These are specialisation of AliFMDSubDetector, that contains the
+// particularities of each of the sub-detector system. It is
+// envisioned that the classes should also define the support
+// volumes and material for each of the detectors.
+//
+// The responsible person for this module is Alla Maevskaia
+// <Alla.Maevskaia@cern.ch>.
+//
+// Many modifications by Christian Holm Christensen <cholm@nbi.dk>
+//
+
+#ifndef ROOT_TClonesArray
+#include <TClonesArray.h>
+#endif
+#ifndef ROOT_TGeomtry
+# include <TGeometry.h>
+#endif
+#ifndef ROOT_TNode
+# include <TNode.h>
+#endif
+#ifndef ROOT_TTUBE
+# include <TTUBE.h>
+#endif
+#ifndef ROOT_TTree
+# include <TTree.h>
+#endif
+#ifndef ROOT_TVirtualMC
+# include <TVirtualMC.h>
+#endif
+#ifndef ROOT_TBrowser
+# include <TBrowser.h>
+#endif
+#ifndef ROOT_TMath
+# include <TMath.h>
+#endif
+
+#ifndef ALIRUNDIGITIZER_H
+# include "AliRunDigitizer.h"
+#endif
+#ifndef ALILOADER_H
+# include "AliLoader.h"
+#endif
+#ifndef ALIRUN_H
+# include "AliRun.h"
+#endif
+#ifndef ALIMC_H
+# include "AliMC.h"
+#endif
+#ifndef ALILOG_H
+# include "AliLog.h"
+#endif
+#ifndef ALIMAGF_H
+# include "AliMagF.h"
+#endif
+#ifndef ALIFMD_H
+# include "AliFMD.h"
+#endif
+#ifndef ALIFMDDIGIG_H
+# include "AliFMDDigit.h"
+#endif
+#ifndef ALIFMDHIT_H
+# include "AliFMDHit.h"
+#endif
+#ifndef ALIFMDDIGITIZER_H
+# include "AliFMDDigitizer.h"
+#endif
+#ifndef ALIFMD1_H
+# include "AliFMD1.h"
+#endif
+#ifndef ALIFMD2_H
+# include "AliFMD2.h"
+#endif
+#ifndef ALIFMD3_H
+# include "AliFMD3.h"
+#endif
+#ifndef ALIALTROBUFFER_H
+# include "AliAltroBuffer.h"
+#endif
+
+//____________________________________________________________________
+ClassImp(AliFMD);
+
+//____________________________________________________________________
+AliFMD::AliFMD()
+ : fInner(0),
+ fOuter(0),
+ fFMD1(0),
+ fFMD2(0),
+ fFMD3(0),
+ fSDigits(0),
+ fNsdigits(0),
+ fSiDensity(0),
+ fPrintboardRotationId(0),
+ fIdentityRotationId(0),
+ fShortLegId(0),
+ fLongLegId(0),
+ fLegLength(0),
+ fLegRadius(0),
+ fModuleSpacing(0)
{
//
// Default constructor for class AliFMD
//
+ AliDebug(0, "Default CTOR");
+ fHits = 0;
+ fDigits = 0;
fIshunt = 0;
}
-
-//_____________________________________________________________________________
-AliFMD::AliFMD(const char *name, const char *title)
- : AliDetector(name,title)
+
+//____________________________________________________________________
+AliFMD::AliFMD(const char *name, const char *title, bool detailed)
+ : AliDetector (name, title),
+ fInner(0),
+ fOuter(0),
+ fFMD1(0),
+ fFMD2(0),
+ fFMD3(0),
+ fSDigits(0),
+ fNsdigits(0),
+ fSiDensity(0),
+ fPrintboardRotationId(0),
+ fIdentityRotationId(0),
+ fShortLegId(0),
+ fLongLegId(0),
+ fLegLength(0),
+ fLegRadius(0),
+ fModuleSpacing(0)
{
//
// Standard constructor for Forward Multiplicity Detector
//
-
- //
+ AliDebug(0, "Standard CTOR");
+
// Initialise Hit array
- fHits = new TClonesArray("AliFMDhit", 405);
- gAlice->AddHitList(fHits);
+ HitsArray();
+ gAlice->GetMCApp()->AddHitList(fHits);
+
+ // (S)Digits for the detectors disk
+ DigitsArray();
+ SDigitsArray();
+
+ // CHC: What is this?
+ fIshunt = 0;
+ SetMarkerColor(kRed);
+ SetLineColor(kYellow);
+ SetSiDensity();
+
+ // Create sub-volume managers
+ fInner = new AliFMDRing('I', detailed);
+ fOuter = new AliFMDRing('O', detailed);
+ fFMD1 = new AliFMD1();
+ fFMD2 = new AliFMD2();
+ fFMD3 = new AliFMD3();
+
+ // Specify parameters of sub-volume managers
+ fFMD1->SetInner(fInner);
+ fFMD1->SetOuter(0);
+
+ fFMD2->SetInner(fInner);
+ fFMD2->SetOuter(fOuter);
+
+ fFMD3->SetInner(fInner);
+ fFMD3->SetOuter(fOuter);
+
+ SetLegLength();
+ SetLegRadius();
+ SetLegOffset();
+ SetModuleSpacing();
+
+ fInner->SetLowR(4.3);
+ fInner->SetHighR(17.2);
+ fInner->SetWaferRadius(13.4/2);
+ fInner->SetTheta(36/2);
+ fInner->SetNStrips(512);
+ fInner->SetSiThickness(.03);
+ fInner->SetPrintboardThickness(.11);
+ fInner->SetBondingWidth(.5);
+
+ fOuter->SetLowR(15.6);
+ fOuter->SetHighR(28.0);
+ fOuter->SetWaferRadius(13.4/2);
+ fOuter->SetTheta(18/2);
+ fOuter->SetNStrips( 256);
+ fOuter->SetSiThickness(.03);
+ fOuter->SetPrintboardThickness(.1);
+ fOuter->SetBondingWidth(.5);
+
- fIshunt = 0;
+ fFMD1->SetHoneycombThickness(1);
+ fFMD1->SetInnerZ(340.0);
+
+ fFMD2->SetHoneycombThickness(1);
+ fFMD2->SetInnerZ(83.4);
+ fFMD2->SetOuterZ(75.2);
+
+ fFMD3->SetHoneycombThickness(1);
+ fFMD3->SetInnerZ(-62.8);
+ fFMD3->SetOuterZ(-75.2);
+}
+
+//____________________________________________________________________
+AliFMD::~AliFMD ()
+{
+ // Destructor for base class AliFMD
+ if (fHits) {
+ fHits->Delete();
+ delete fHits;
+ fHits = 0;
+ }
+ if (fDigits) {
+ fDigits->Delete();
+ delete fDigits;
+ fDigits = 0;
+ }
+ if (fSDigits) {
+ fSDigits->Delete();
+ delete fSDigits;
+ fSDigits = 0;
+ }
}
+
+//====================================================================
+//
+// GEometry ANd Traking
+//
+//____________________________________________________________________
+void
+AliFMD::CreateGeometry()
+{
+ //
+ // Create the geometry of Forward Multiplicity Detector. The actual
+ // construction of the geometry is delegated to the class AliFMDRing
+ // and AliFMDSubDetector and the relevant derived classes.
+ //
+ // The flow of this member function is:
+ //
+ // FOR rings fInner and fOuter DO
+ // AliFMDRing::Init();
+ // END FOR
+ //
+ // Set up hybrud card support (leg) volume shapes
+ //
+ // FOR rings fInner and fOuter DO
+ // AliFMDRing::SetupGeometry();
+ // END FOR
+ //
+ // FOR subdetectors fFMD1, fFMD2, and fFMD3 DO
+ // AliFMDSubDetector::SetupGeomtry();
+ // END FOR
+ //
+ // FOR subdetectors fFMD1, fFMD2, and fFMD3 DO
+ // AliFMDSubDetector::Geomtry();
+ // END FOR
+ //
+
+ // DebugGuard guard("AliFMD::CreateGeometry");
+ AliDebug(10, "Creating geometry");
+
+ fInner->Init();
+ fOuter->Init();
+
+ TString name;
+ Double_t par[3];
+
+ par[0] = fLegRadius - .1;
+ par[1] = fLegRadius;
+ par[2] = fLegLength / 2;
+ name = "FSL";
+ fShortLegId = gMC->Gsvolu(name.Data(),"TUBE",(*fIdtmed)[kPlasticId],par,3);
+
+ par[2] += fModuleSpacing / 2;
+ name = "FLL";
+ fLongLegId = gMC->Gsvolu(name.Data(),"TUBE",(*fIdtmed)[kPlasticId],par,3);
+
+ fInner->SetupGeometry((*fIdtmed)[kAirId],
+ (*fIdtmed)[kSiId],
+ (*fIdtmed)[kPcbId],
+ fPrintboardRotationId,
+ fIdentityRotationId);
+ fOuter->SetupGeometry((*fIdtmed)[kAirId],
+ (*fIdtmed)[kSiId],
+ (*fIdtmed)[kPcbId],
+ fPrintboardRotationId,
+ fIdentityRotationId);
+
+ fFMD1->SetupGeometry((*fIdtmed)[kAirId], (*fIdtmed)[kKaptionId]);
+ fFMD2->SetupGeometry((*fIdtmed)[kAirId], (*fIdtmed)[kKaptionId]);
+ fFMD3->SetupGeometry((*fIdtmed)[kAirId], (*fIdtmed)[kKaptionId]);
+
+ fFMD1->Geometry("ALIC", fPrintboardRotationId, fIdentityRotationId);
+ fFMD2->Geometry("ALIC", fPrintboardRotationId, fIdentityRotationId);
+ fFMD3->Geometry("ALIC", fPrintboardRotationId, fIdentityRotationId);
+}
+
+//____________________________________________________________________
+void AliFMD::CreateMaterials()
+{
+ // Register various materials and tracking mediums with the
+ // backend.
+ //
+ // Currently defined materials and mediums are
+ //
+ // FMD Air Normal air
+ // FMD Si Active silicon of sensors
+ // FMD Carbon Normal carbon used in support, etc.
+ // FMD Kapton Carbon used in Honeycomb
+ // FMD PCB Printed circuit board material
+ // FMD Plastic Material for support legs
+ //
+ // Also defined are two rotation matricies.
+ //
+ // DebugGuard guard("AliFMD::CreateMaterials");
+ AliDebug(10, "Creating materials");
+ Int_t id;
+ Double_t a = 0;
+ Double_t z = 0;
+ Double_t density = 0;
+ Double_t radiationLength = 0;
+ Double_t absorbtionLength = 999;
+ Int_t fieldType = gAlice->Field()->Integ(); // Field type
+ Double_t maxField = gAlice->Field()->Max(); // Field max.
+ Double_t maxBending = 0; // Max Angle
+ Double_t maxStepSize = 0.001; // Max step size
+ Double_t maxEnergyLoss = 1; // Max Delta E
+ Double_t precision = 0.001; // Precision
+ Double_t minStepSize = 0.001; // Minimum step size
-//_____________________________________________________________________________
-void AliFMD::AddHit(Int_t track, Int_t *vol, Float_t *hits)
+ // Silicon
+ a = 28.0855;
+ z = 14.;
+ density = fSiDensity;
+ radiationLength = 9.36;
+ maxBending = 1;
+ maxStepSize = .001;
+ precision = .001;
+ minStepSize = .001;
+ id = kSiId;
+ AliMaterial(id, "FMD Si$", a, z, density, radiationLength, absorbtionLength);
+ AliMedium(kSiId, "FMD Si$",id,1,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+
+
+ // Carbon
+ a = 12.011;
+ z = 6.;
+ density = 2.265;
+ radiationLength = 18.8;
+ maxBending = 10;
+ maxStepSize = .01;
+ precision = .003;
+ minStepSize = .003;
+ id = kCarbonId;
+ AliMaterial(id, "FMD Carbon$", a, z, density, radiationLength,
+ absorbtionLength);
+ AliMedium(kCarbonId, "FMD Carbon$",id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+
+ // Silicon chip
+ {
+ Float_t as[] = { 12.0107, 14.0067, 15.9994,
+ 1.00794, 28.0855, 107.8682 };
+ Float_t zs[] = { 6., 7., 8.,
+ 1., 14., 47. };
+ Float_t ws[] = { 0.039730642, 0.001396798, 0.01169634,
+ 0.004367771, 0.844665, 0.09814344903 };
+ density = 2.36436;
+ maxBending = 10;
+ maxStepSize = .01;
+ precision = .003;
+ minStepSize = .003;
+ id = kSiChipId;
+ AliMixture(id, "FMD Si Chip$", as, zs, density, 6, ws);
+ AliMedium(kSiChipId, "FMD Si Chip$", id, 0, fieldType, maxField,
+ maxBending, maxStepSize, maxEnergyLoss, precision, minStepSize);
+ }
+
+
+ // Kaption
+ {
+ Float_t as[] = { 1.00794, 12.0107, 14.010, 15.9994};
+ Float_t zs[] = { 1., 6., 7., 8.};
+ Float_t ws[] = { 0.026362, 0.69113, 0.07327, 0.209235};
+ density = 1.42;
+ maxBending = 1;
+ maxStepSize = .001;
+ precision = .001;
+ minStepSize = .001;
+ id = kKaptionId;
+ AliMixture(id, "FMD Kaption$", as, zs, density, 4, ws);
+ AliMedium(kKaptionId, "FMD Kaption$",id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+ }
+
+ // Air
+ {
+ Float_t as[] = { 12.0107, 14.0067, 15.9994, 39.948 };
+ Float_t zs[] = { 6., 7., 8., 18. };
+ Float_t ws[] = { 0.000124, 0.755267, 0.231781, 0.012827 };
+ density = .00120479;
+ maxBending = 1;
+ maxStepSize = .001;
+ precision = .001;
+ minStepSize = .001;
+ id = kAirId;
+ AliMixture(id, "FMD Air$", as, zs, density, 4, ws);
+ AliMedium(kAirId, "FMD Air$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+ }
+
+ // PCB
+ {
+ Float_t zs[] = { 14., 20., 13., 12.,
+ 5., 22., 11., 19.,
+ 26., 9., 8., 6.,
+ 7., 1.};
+ Float_t as[] = { 28.0855, 40.078, 26.981538, 24.305,
+ 10.811, 47.867, 22.98977, 39.0983,
+ 55.845, 18.9984, 15.9994, 12.0107,
+ 14.0067, 1.00794};
+ Float_t ws[] = { 0.15144894, 0.08147477, 0.04128158, 0.00904554,
+ 0.01397570, 0.00287685, 0.00445114, 0.00498089,
+ 0.00209828, 0.00420000, 0.36043788, 0.27529426,
+ 0.01415852, 0.03427566};
+ density = 1.8;
+ maxBending = 1;
+ maxStepSize = .001;
+ precision = .001;
+ minStepSize = .001;
+ id = kPcbId;
+ AliMixture(id, "FMD PCB$", as, zs, density, 14, ws);
+ AliMedium(kPcbId, "FMD PCB$", id,1,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+ }
+
+ // Plastic
+ {
+ Float_t as[] = { 1.01, 12.01 };
+ Float_t zs[] = { 1., 6. };
+ Float_t ws[] = { 1., 1. };
+ density = 1.03;
+ maxBending = 10;
+ maxStepSize = .01;
+ precision = .003;
+ minStepSize = .003;
+ id = kPlasticId;
+ AliMixture(id, "FMD Plastic$", as, zs, density, -2, ws);
+ AliMedium(kPlasticId, "FMD Plastic$", id,0,fieldType,maxField,maxBending,
+ maxStepSize,maxEnergyLoss,precision,minStepSize);
+ }
+ AliMatrix(fPrintboardRotationId, 90, 90, 0, 90, 90, 0);
+ AliMatrix(fIdentityRotationId, 90, 0, 90, 90, 0, 0);
+}
+
+//____________________________________________________________________
+void
+AliFMD::Init()
{
//
- // Add a FMD hit
+ // Initialis the FMD after it has been built
+ Int_t i;
+ //
+ if (fDebug) {
+ std::cout << "\n" << ClassName() << ": " << std::flush;
+ for (i = 0; i < 35; i++) std::cout << "*";
+ std::cout << " FMD_INIT ";
+ for (i = 0; i < 35; i++) std::cout << "*";
+ std::cout << "\n" << ClassName() << ": " << std::flush;
+ //
+ // Here the FMD initialisation code (if any!)
+ for (i = 0; i < 80; i++) std::cout << "*";
+ std::cout << std::endl;
+ }
+ //
//
- TClonesArray &lhits = *fHits;
- new(lhits[fNhits++]) AliFMDhit(fIshunt,track,vol,hits);
}
-
-//_____________________________________________________________________________
-void AliFMD::BuildGeometry()
+
+//====================================================================
+//
+// Graphics and event display
+//
+//____________________________________________________________________
+void
+AliFMD::BuildGeometry()
{
//
// Build simple ROOT TNode geometry for event display
//
- TNode *Node, *Top;
- const int kColorFMD = 7;
- //
- Top=gAlice->GetGeometry()->GetNode("alice");
-
- // FMD define the different volumes
-
- new TTUBE("S_FMD1","FMD sensitive volume 1","void",4.5,10.5,3);
- Top->cd();
- Node = new TNode("FMD1","FMD1","S_FMD1",0,0,86.5,"");
- Node->SetLineColor(kColorFMD);
- fNodes->Add(Node);
-
- new TTUBE("S_FMD2","FMD sensitive volume 2","void",4.5,10.5,3);
- Top->cd();
- Node = new TNode("FMD2","FMD2","S_FMD2",0,0,-86.5,"");
- Node->SetLineColor(kColorFMD);
- fNodes->Add(Node);
-
- new TTUBE("S_FMD3","FMD sensitive volume 3","void",8,14,3);
- Top->cd();
- Node = new TNode("FMD3","FMD3","S_FMD3",0,0,71.2,"");
- Node->SetLineColor(kColorFMD);
- fNodes->Add(Node);
-
- new TTUBE("S_FMD4","FMD sensitive volume 4","void",8,14,3);
- Top->cd();
- Node = new TNode("FMD4","FMD4","S_FMD4",0,0,-71.2,"");
- fNodes->Add(Node);
- Node->SetLineColor(kColorFMD);
-
- new TTUBE("S_FMD5","FMD sensitive volume 5","void",8,17.5,3);
- Top->cd();
- Node = new TNode("FMD5","FMD5","S_FMD5",0,0,44,"");
- Node->SetLineColor(kColorFMD);
- fNodes->Add(Node);
-
- new TTUBE("S_FMD6","FMD sensitive volume 6","void",8,17.5,3);
- Top->cd();
- Node = new TNode("FMD6","FMD6","S_FMD6",0,0,-44,"");
- Node->SetLineColor(kColorFMD);
- fNodes->Add(Node);
-
- new TTUBE("S_FMD7","FMD sensitive volume 7","void",4.2,13,3);
- Top->cd();
- Node = new TNode("FMD7","FMD7","S_FMD7",0,0,-231,"");
- Node->SetLineColor(kColorFMD);
- fNodes->Add(Node);
+ // Build a simplified geometry of the FMD used for event display
+ //
+ // The actual building of the TNodes is done by
+ // AliFMDSubDetector::SimpleGeometry.
+ AliDebug(10, "Creating a simplified geometry");
+
+ TNode* top = gAlice->GetGeometry()->GetNode("alice");
+
+ fFMD1->SimpleGeometry(fNodes, top, GetLineColor(), 0);
+ fFMD2->SimpleGeometry(fNodes, top, GetLineColor(), 0);
+ fFMD3->SimpleGeometry(fNodes, top, GetLineColor(), 0);
}
-
-//_____________________________________________________________________________
-Int_t AliFMD::DistancetoPrimitive(Int_t , Int_t )
+
+//____________________________________________________________________
+void
+AliFMD::DrawDetector()
+{
+ //
+ // Draw a shaded view of the Forward multiplicity detector
+ //
+ // DebugGuard guard("AliFMD::DrawDetector");
+ AliDebug(10, "Draw detector");
+
+ //Set ALIC mother transparent
+ gMC->Gsatt("ALIC","SEEN",0);
+
+ //Set volumes visible
+ fFMD1->Gsatt();
+ fFMD2->Gsatt();
+ fFMD3->Gsatt();
+ fInner->Gsatt();
+ fOuter->Gsatt();
+
+ //
+ gMC->Gdopt("hide", "on");
+ gMC->Gdopt("shad", "on");
+ gMC->Gsatt("*", "fill", 7);
+ gMC->SetClipBox(".");
+ gMC->SetClipBox("*", 0, 1000, -1000, 1000, -1000, 1000);
+ gMC->DefaultRange();
+ gMC->Gdraw("alic", 40, 30, 0, 12, 12, .055, .055);
+ gMC->Gdhead(1111, "Forward Multiplicity Detector");
+ gMC->Gdman(16, 10, "MAN");
+ gMC->Gdopt("hide", "off");
+}
+
+//____________________________________________________________________
+const Int_t
+AliFMD::DistanceToPrimitive(Int_t, Int_t)
{
//
// Calculate the distance from the mouse to the FMD on the screen
//
return 9999;
}
-
-//_____________________________________________________________________________
-void AliFMD::StepManager()
+
+//====================================================================
+//
+// Hit and Digit managment
+//
+//____________________________________________________________________
+void
+AliFMD::MakeBranch(Option_t * option)
{
+ // Create Tree branches for the FMD.
//
- // Called for each step in the FMD
+ // Options:
//
+ // H Make a branch of TClonesArray of AliFMDHit's
+ // D Make a branch of TClonesArray of AliFMDDigit's
+ // S Make a branch of TClonesArray of AliFMDSDigit's
+ //
+ const Int_t kBufferSize = 16000;
+ TString branchname(GetName());
+ TString opt(option);
- Float_t hits[3];
- Int_t i,copy,vol[1];
- TClonesArray &lhits = *fHits;
- TLorentzVector p;
+ if (opt.Contains("H", TString::kIgnoreCase)) {
+ HitsArray();
+ AliDetector::MakeBranch(option);
+ }
+ if (opt.Contains("D", TString::kIgnoreCase)) {
+ DigitsArray();
+ MakeBranchInTree(fLoader->TreeD(), branchname.Data(),
+ &fDigits, kBufferSize, 0);
+ }
+ if (opt.Contains("S", TString::kIgnoreCase)) {
+ SDigitsArray();
+ MakeBranchInTree(fLoader->TreeS(), branchname.Data(),
+ &fSDigits, kBufferSize, 0);
+ }
+}
+
+//____________________________________________________________________
+void
+AliFMD::SetTreeAddress()
+{
+ // Set branch address for the Hits, Digits, and SDigits Tree.
+ if (fLoader->TreeH()) HitsArray();
+ AliDetector::SetTreeAddress();
+
+ TTree *treeD = fLoader->TreeD();
+ if (treeD) {
+ DigitsArray();
+ TBranch* branch = treeD->GetBranch ("FMD");
+ if (branch) branch->SetAddress(&fDigits);
+ }
+
+ TTree *treeS = fLoader->TreeS();
+ if (treeS) {
+ SDigitsArray();
+ TBranch* branch = treeS->GetBranch ("FMD");
+ if (branch) branch->SetAddress(&fSDigits);
+ }
+}
+
+
+
+//____________________________________________________________________
+void
+AliFMD::SetHitsAddressBranch(TBranch *b)
+{
+ // Set the TClonesArray to read hits into.
+ b->SetAddress(&fHits);
+}
+
+//____________________________________________________________________
+void
+AliFMD::AddHit(Int_t track, Int_t *vol, Float_t *hits)
+{
+ // Add a hit to the hits tree
+ //
+ // The information of the two arrays are decoded as
+ //
+ // Parameters
+ // track Track #
+ // ivol[0] [UShort_t ] Detector #
+ // ivol[1] [Char_t ] Ring ID
+ // ivol[2] [UShort_t ] Sector #
+ // ivol[3] [UShort_t ] Strip #
+ // hits[0] [Float_t ] Track's X-coordinate at hit
+ // hits[1] [Float_t ] Track's Y-coordinate at hit
+ // hits[3] [Float_t ] Track's Z-coordinate at hit
+ // hits[4] [Float_t ] X-component of track's momentum
+ // hits[5] [Float_t ] Y-component of track's momentum
+ // hits[6] [Float_t ] Z-component of track's momentum
+ // hits[7] [Float_t ] Energy deposited by track
+ // hits[8] [Int_t ] Track's particle Id #
+ // hits[9] [Float_t ] Time when the track hit
+ //
+ //
+ AddHit(track,
+ UShort_t(vol[0]), // Detector #
+ Char_t(vol[1]), // Ring ID
+ UShort_t(vol[2]), // Sector #
+ UShort_t(vol[3]), // Strip #
+ hits[0], // X
+ hits[1], // Y
+ hits[2], // Z
+ hits[3], // Px
+ hits[4], // Py
+ hits[5], // Pz
+ hits[6], // Energy loss
+ Int_t(hits[7]), // PDG
+ hits[8]); // Time
+}
+
+//____________________________________________________________________
+void
+AliFMD::AddHit(Int_t track,
+ UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ Float_t x,
+ Float_t y,
+ Float_t z,
+ Float_t px,
+ Float_t py,
+ Float_t pz,
+ Float_t edep,
+ Int_t pdg,
+ Float_t t)
+{
+ //
+ // Add a hit to the list
+ //
+ // Parameters:
+ //
+ // track Track #
+ // detector Detector # (1, 2, or 3)
+ // ring Ring ID ('I' or 'O')
+ // sector Sector # (For inner/outer rings: 0-19/0-39)
+ // strip Strip # (For inner/outer rings: 0-511/0-255)
+ // x Track's X-coordinate at hit
+ // y Track's Y-coordinate at hit
+ // z Track's Z-coordinate at hit
+ // px X-component of track's momentum
+ // py Y-component of track's momentum
+ // pz Z-component of track's momentum
+ // edep Energy deposited by track
+ // pdg Track's particle Id #
+ // t Time when the track hit
+ //
+ TClonesArray& a = *(HitsArray());
+ // Search through the list of already registered hits, and see if we
+ // find a hit with the same parameters. If we do, then don't create
+ // a new hit, but rather update the energy deposited in the hit.
+ // This is done, so that a FLUKA based simulation will get the
+ // number of hits right, not just the enerrgy deposition.
+ for (Int_t i = 0; i < fNhits; i++) {
+ if (!a.At(i)) continue;
+ AliFMDHit* hit = static_cast<AliFMDHit*>(a.At(i));
+ if (hit->Detector() == detector
+ && hit->Ring() == ring
+ && hit->Sector() == sector
+ && hit->Strip() == strip
+ && hit->Track() == track) {
+ Warning("AddHit", "already had a hit in FMD%d%c[%2d,%3d] for track # %d,"
+ " adding energy (%f) to that hit (%f) -> %f",
+ detector, ring, sector, strip, track, edep, hit->Edep(),
+ hit->Edep() + edep);
+ hit->SetEdep(hit->Edep() + edep);
+ return;
+ }
+ }
+ // If hit wasn't already registered, do so know.
+ new (a[fNhits]) AliFMDHit(fIshunt, track, detector, ring, sector, strip,
+ x, y, z, px, py, pz, edep, pdg, t);
+ fNhits++;
+}
+
+//____________________________________________________________________
+void
+AliFMD::AddDigit(Int_t* digits)
+{
+ // Add a digit to the Digit tree
+ //
+ // Paramters
+ //
+ // digits[0] [UShort_t] Detector #
+ // digits[1] [Char_t] Ring ID
+ // digits[2] [UShort_t] Sector #
+ // digits[3] [UShort_t] Strip #
+ // digits[4] [UShort_t] ADC Count
+ // digits[5] [Short_t] ADC Count, -1 if not used
+ // digits[6] [Short_t] ADC Count, -1 if not used
+ //
+ AddDigit(UShort_t(digits[0]), // Detector #
+ Char_t(digits[1]), // Ring ID
+ UShort_t(digits[2]), // Sector #
+ UShort_t(digits[3]), // Strip #
+ UShort_t(digits[4]), // ADC Count1
+ Short_t(digits[5]), // ADC Count2
+ Short_t(digits[6])); // ADC Count3
+}
+
+//____________________________________________________________________
+void
+AliFMD::AddDigit(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ UShort_t count1,
+ Short_t count2,
+ Short_t count3)
+{
+ // add a real digit - as coming from data
+ //
+ // Parameters
+ //
+ // detector Detector # (1, 2, or 3)
+ // ring Ring ID ('I' or 'O')
+ // sector Sector # (For inner/outer rings: 0-19/0-39)
+ // strip Strip # (For inner/outer rings: 0-511/0-255)
+ // count1 ADC count (a 10-bit word)
+ // count2 ADC count (a 10-bit word), or -1 if not used
+ // count3 ADC count (a 10-bit word), or -1 if not used
+ TClonesArray& a = *(DigitsArray());
- gMC->CurrentVolID(copy);
- vol[0] = copy;
- gMC->TrackPosition(p);
- for(i=0;i<3;++i) hits[i]=p[i];
- new(lhits[fNhits++]) AliFMDhit(fIshunt,gAlice->CurrentTrack(),vol,hits);
+ new (a[fNdigits++])
+ AliFMDDigit(detector, ring, sector, strip, count1, count2, count3);
}
-//___________________________________________
-void AliFMD::Init()
+//____________________________________________________________________
+void
+AliFMD::AddSDigit(Int_t* digits)
{
+ // Add a digit to the SDigit tree
+ //
+ // Paramters
//
- // Initialis the FMD after it has been built
- Int_t i;
+ // digits[0] [UShort_t] Detector #
+ // digits[1] [Char_t] Ring ID
+ // digits[2] [UShort_t] Sector #
+ // digits[3] [UShort_t] Strip #
+ // digits[4] [Float_t] Total energy deposited
+ // digits[5] [UShort_t] ADC Count
+ // digits[6] [Short_t] ADC Count, -1 if not used
+ // digits[7] [Short_t] ADC Count, -1 if not used
+ //
+ AddSDigit(UShort_t(digits[0]), // Detector #
+ Char_t(digits[1]), // Ring ID
+ UShort_t(digits[2]), // Sector #
+ UShort_t(digits[3]), // Strip #
+ Float_t(digits[4]), // Edep
+ UShort_t(digits[5]), // ADC Count1
+ Short_t(digits[6]), // ADC Count2
+ Short_t(digits[7])); // ADC Count3
+}
+
+//____________________________________________________________________
+void
+AliFMD::AddSDigit(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip,
+ Float_t edep,
+ UShort_t count1,
+ Short_t count2,
+ Short_t count3)
+{
+ // add a summable digit
+ //
+ // Parameters
//
- printf("\n");
- for(i=0;i<35;i++) printf("*");
- printf(" FMD_INIT ");
- for(i=0;i<35;i++) printf("*");
- printf("\n");
+ // detector Detector # (1, 2, or 3)
+ // ring Ring ID ('I' or 'O')
+ // sector Sector # (For inner/outer rings: 0-19/0-39)
+ // strip Strip # (For inner/outer rings: 0-511/0-255)
+ // edep Total energy deposited
+ // count1 ADC count (a 10-bit word)
+ // count2 ADC count (a 10-bit word), or -1 if not used
+ // count3 ADC count (a 10-bit word), or -1 if not used
//
- // Here the FMD initialisation code (if any!)
- for(i=0;i<80;i++) printf("*");
- printf("\n");
+ TClonesArray& a = *(SDigitsArray());
+
+ new (a[fNsdigits++])
+ AliFMDSDigit(detector, ring, sector, strip, edep, count1, count2, count3);
}
-
-ClassImp(AliFMDhit)
-
-//_____________________________________________________________________________
-AliFMDhit::AliFMDhit(Int_t shunt, Int_t track, Int_t *vol, Float_t *hits):
- AliHit(shunt, track)
+//____________________________________________________________________
+void
+AliFMD::ResetSDigits()
{
//
- // Add a FMD hit
+ // Reset number of digits and the digits array for this detector
//
- fVolume = vol[0];
- fX=hits[0];
- fY=hits[1];
- fZ=hits[2];
+ fNsdigits = 0;
+ if (fSDigits) fSDigits->Clear();
}
-
+
+
+//____________________________________________________________________
+TClonesArray*
+AliFMD::HitsArray()
+{
+ // Initialize hit array if not already, and return pointer to it.
+ if (!fHits) {
+ fHits = new TClonesArray("AliFMDHit", 1000);
+ fNhits = 0;
+ }
+ return fHits;
+}
+
+//____________________________________________________________________
+TClonesArray*
+AliFMD::DigitsArray()
+{
+ // Initialize digit array if not already, and return pointer to it.
+ if (!fDigits) {
+ fDigits = new TClonesArray("AliFMDDigit", 1000);
+ fNdigits = 0;
+ }
+ return fDigits;
+}
+
+//____________________________________________________________________
+TClonesArray*
+AliFMD::SDigitsArray()
+{
+ // Initialize digit array if not already, and return pointer to it.
+ if (!fSDigits) {
+ fSDigits = new TClonesArray("AliFMDSDigit", 1000);
+ fNsdigits = 0;
+ }
+ return fSDigits;
+}
+
+//====================================================================
+//
+// Digitization
+//
+//____________________________________________________________________
+void
+AliFMD::Hits2Digits()
+{
+ // Create AliFMDDigit's from AliFMDHit's. This is done by making a
+ // AliFMDDigitizer, and executing that code.
+ //
+ AliRunDigitizer* manager = new AliRunDigitizer(1, 1);
+ manager->SetInputStream(0, "galice.root");
+ manager->SetOutputFile("H2Dfile");
+
+ /* AliDigitizer* dig =*/ CreateDigitizer(manager);
+ manager->Exec("");
+}
+
+//____________________________________________________________________
+void
+AliFMD::Hits2SDigits()
+{
+ // Create AliFMDSDigit's from AliFMDHit's. This is done by creating
+ // an AliFMDSDigitizer object, and executing it.
+ //
+ AliDigitizer* sdig = new AliFMDSDigitizer("galice.root");
+ sdig->Exec("");
+}
+
+
+//____________________________________________________________________
+AliDigitizer*
+AliFMD::CreateDigitizer(AliRunDigitizer* manager) const
+{
+ // Create a digitizer object
+ return new AliFMDDigitizer(manager);
+}
+
+//====================================================================
+//
+// Raw data simulation
+//
+//__________________________________________________________________
+void
+AliFMD::Digits2Raw()
+{
+ // Turn digits into raw data.
+ //
+ // Digits are read from the Digit branch, and processed to make
+ // three DDL files, one for each of the sub-detectors FMD1, FMD2,
+ // and FMD3.
+ //
+ // The raw data files consists of a header, followed by ALTRO
+ // formatted blocks.
+ //
+ // +-------------+
+ // | Header |
+ // +-------------+
+ // | ALTRO Block |
+ // | ... |
+ // +-------------+
+ // DDL file
+ //
+ // An ALTRO formatted block, in the FMD context, consists of a
+ // number of counts followed by a trailer.
+ //
+ // +------------------+
+ // | Count |
+ // | ... |
+ // | possible fillers |
+ // +------------------+
+ // | Trailer |
+ // +------------------+
+ // ALTRO block
+ //
+ // The counts are listed backwards, that is, starting with the
+ // latest count, and ending in the first.
+ //
+ // Each count consist of 1 or more ADC samples of the VA1_ALICE
+ // pre-amp. signal. Just how many samples are used depends on
+ // whether the ALTRO over samples the pre-amp. Each sample is a
+ // 10-bit word, and the samples are grouped into 40-bit blocks
+ //
+ // +------------------------------------+
+ // | S(n) | S(n-1) | S(n-2) | S(n-3) |
+ // | ... | ... | ... | ... |
+ // | S(2) | S(1) | AA | AA |
+ // +------------------------------------+
+ // Counts + possible filler
+ //
+ // The trailer of the number of words of signales, the starting
+ // strip number, the sector number, and the ring ID; each 10-bit
+ // words, packed into 40-bits.
+ //
+ // +------------------------------------+
+ // | # words | start | sector | ring |
+ // +------------------------------------+
+ // Trailer
+ //
+ // Note, that this method assumes that the digits are ordered.
+ //
+ AliFMD* fmd = static_cast<AliFMD*>(gAlice->GetDetector(GetName()));
+ fLoader->LoadDigits();
+ TTree* digitTree = fLoader->TreeD();
+ if (!digitTree) {
+ Error("Digits2Raw", "no digit tree");
+ return;
+ }
+
+ TClonesArray* digits = new TClonesArray("AliFMDDigit", 1000);
+ fmd->SetTreeAddress();
+ TBranch* digitBranch = digitTree->GetBranch(GetName());
+ if (!digitBranch) {
+ Error("Digits2Raw", "no branch for %s", GetName());
+ return;
+ }
+ digitBranch->SetAddress(&digits);
+
+ Int_t nEvents = Int_t(digitTree->GetEntries());
+ for (Int_t event = 0; event < nEvents; event++) {
+ fmd->ResetDigits();
+ digitTree->GetEvent(event);
+
+ Int_t nDigits = digits->GetEntries();
+ if (nDigits < 1) continue;
+
+
+ UShort_t prevDetector = 0;
+ Char_t prevRing = '\0';
+ UShort_t prevSector = 0;
+ // UShort_t prevStrip = 0;
+
+ // The first seen strip number for a channel
+ UShort_t startStrip = 0;
+
+ // Which channel number in the ALTRO channel we're at
+ UShort_t offset = 0;
+
+ // How many times the ALTRO Samples one VA1_ALICE channel
+ Int_t sampleRate = 1;
+
+ // A buffer to hold 1 ALTRO channel - Normally, one ALTRO channel
+ // holds 128 VA1_ALICE channels, sampled at a rate of `sampleRate'
+ TArrayI channel(128 * sampleRate);
+
+ // The Altro buffer
+ AliAltroBuffer* altro = 0;
+
+ // Loop over the digits in the event. Note, that we assume the
+ // the digits are in order in the branch. If they were not, we'd
+ // have to cache all channels before we could write the data to
+ // the ALTRO buffer, or we'd have to set up a map of the digits.
+ for (Int_t i = 0; i < nDigits; i++) {
+ // Get the digit
+ AliFMDDigit* digit = static_cast<AliFMDDigit*>(digits->At(i));
+
+ UShort_t det = digit->Detector();
+ Char_t ring = digit->Ring();
+ UShort_t sector = digit->Sector();
+ UShort_t strip = digit->Strip();
+ if (det != prevDetector) {
+ AliDebug(10, Form("FMD: New DDL, was %d, now %d",
+ kBaseDDL + prevDetector - 1,
+ kBaseDDL + det - 1));
+ // If an altro exists, delete the object, flushing the data to
+ // disk, and closing the file.
+ if (altro) {
+ // When the first argument is false, we write the real
+ // header.
+ AliDebug(10, Form("New altro: Write channel at %d Strip: %d "
+ "Sector: %d Ring: %d",
+ i, startStrip, prevSector, prevRing));
+ // TPC to FMD translations
+ //
+ // TPC FMD
+ // ----------+-----------
+ // pad | strip
+ // row | sector
+ // sector | ring
+ //
+ altro->WriteChannel(Int_t(startStrip),
+ Int_t(prevSector),
+ Int_t((prevRing == 'I' ? 0 : 1)),
+ channel.fN, channel.fArray, 0);
+ altro->Flush();
+ altro->WriteDataHeader(kFALSE, kFALSE);
+ delete altro;
+ altro = 0;
+ }
+
+ prevDetector = det;
+ // Need to open a new DDL!
+ Int_t ddlId = kBaseDDL + det - 1;
+ TString filename(Form("%s_%d.ddl", GetName(), ddlId));
+
+ AliDebug(10, Form("New altro buffer with DDL file %s",
+ filename.Data()));
+ AliDebug(10, Form("New altro at %d", i));
+ // Create a new altro buffer - a `1' as the second argument
+ // means `write mode'
+ altro = new AliAltroBuffer(filename.Data(), 1);
+
+ // Write a dummy (first argument is true) header to the DDL
+ // file - later on, when we close the file, we write the real
+ // header
+ altro->WriteDataHeader(kTRUE, kFALSE);
+
+ // Figure out the sample rate
+ if (digit->Count2() > 0) sampleRate = 2;
+ if (digit->Count3() > 0) sampleRate = 3;
+
+ channel.Set(128 * sampleRate);
+ offset = 0;
+ prevRing = ring;
+ prevSector = sector;
+ startStrip = strip;
+ }
+ else if (offset == 128
+ || digit->Ring() != prevRing
+ || digit->Sector() != prevSector) {
+ // Force a new Altro channel
+ AliDebug(10, Form("Flushing channel to disk because %s",
+ (offset == 128 ? "channel is full" :
+ (ring != prevRing ? "new ring up" :
+ "new sector up"))));
+ AliDebug(10, Form("New Channel: Write channel at %d Strip: %d "
+ "Sector: %d Ring: %d",
+ i, startStrip, prevSector, prevRing));
+ altro->WriteChannel(Int_t(startStrip),
+ Int_t(prevSector),
+ Int_t((prevRing == 'I' ? 0 : 1)),
+ channel.fN, channel.fArray, 0);
+ // Reset and update channel variables
+ channel.Reset(0);
+ offset = 0;
+ startStrip = strip;
+ prevRing = ring;
+ prevSector = sector;
+ }
+
+ // Store the counts of the ADC in the channel buffer
+ channel[offset * sampleRate] = digit->Count1();
+ if (sampleRate > 1)
+ channel[offset * sampleRate + 1] = digit->Count2();
+ if (sampleRate > 2)
+ channel[offset * sampleRate + 2] = digit->Count3();
+ offset++;
+ }
+ // Finally, we need to close the final ALTRO buffer if it wasn't
+ // already
+ if (altro) {
+ altro->Flush();
+ altro->WriteDataHeader(kFALSE, kFALSE);
+ delete altro;
+ }
+ }
+ fLoader->UnloadDigits();
+}
+
+//==================================================================
+//
+// Various setter functions for the common paramters
+//
+
+//__________________________________________________________________
+void
+AliFMD::SetLegLength(Double_t length)
+{
+ // Set lenght of plastic legs that hold the hybrid (print board and
+ // silicon sensor) onto the honeycomp support
+ //
+ // DebugGuard guard("AliFMD::SetLegLength");
+ AliDebug(10, "AliFMD::SetLegLength");
+ fLegLength = length;
+ fInner->SetLegLength(fLegLength);
+ fOuter->SetLegLength(fLegLength);
+}
+
+//__________________________________________________________________
+void
+AliFMD::SetLegOffset(Double_t offset)
+{
+ // Set offset from edge of hybrid to plastic legs that hold the
+ // hybrid (print board and silicon sensor) onto the honeycomp
+ // support
+ //
+ // DebugGuard guard("AliFMD::SetLegOffset");
+ AliDebug(10, "AliFMD::SetLegOffset");
+ fInner->SetLegOffset(offset);
+ fOuter->SetLegOffset(offset);
+}
+
+//__________________________________________________________________
+void
+AliFMD::SetLegRadius(Double_t radius)
+{
+ // Set the diameter of the plastic legs that hold the hybrid (print
+ // board and silicon sensor) onto the honeycomp support
+ //
+ // DebugGuard guard("AliFMD::SetLegRadius");
+ AliDebug(10, "AliFMD::SetLegRadius");
+ fLegRadius = radius;
+ fInner->SetLegRadius(fLegRadius);
+ fOuter->SetLegRadius(fLegRadius);
+}
+
+//__________________________________________________________________
+void
+AliFMD::SetModuleSpacing(Double_t spacing)
+{
+ // Set the distance between the front and back sensor modules
+ // (module staggering).
+ //
+ // DebugGuard guard("AliFMD::SetModuleSpacing");
+ AliDebug(10, "AliFMD::SetModuleSpacing");
+ fModuleSpacing = spacing;
+ fInner->SetModuleSpacing(fModuleSpacing);
+ fOuter->SetModuleSpacing(fModuleSpacing);
+}
+
+//====================================================================
+//
+// Utility
+//
+//__________________________________________________________________
+void
+AliFMD::Browse(TBrowser* b)
+{
+ // Browse this object.
+ //
+ AliDebug(10, "AliFMD::Browse");
+ AliDetector::Browse(b);
+ if (fInner) b->Add(fInner, "Inner Ring");
+ if (fOuter) b->Add(fOuter, "Outer Ring");
+ if (fFMD1) b->Add(fFMD1, "FMD1 SubDetector");
+ if (fFMD2) b->Add(fFMD2, "FMD2 SubDetector");
+ if (fFMD3) b->Add(fFMD3, "FMD3 SubDetector");
+}
+
+
+//___________________________________________________________________
+//
+// EOF
+//