*
* See cxx source for full Copyright notice
*/
-
//____________________________________________________________________
//
// Singleton class to handle various parameters (not geometry) of the
// FMD
// Should get ata fromm Conditions DB.
//
+/** @file AliFMDParameters.h
+ @author Christian Holm Christensen <cholm@nbi.dk>
+ @date Mon Mar 27 12:44:43 2006
+ @brief Manager of FMD parameters
+*/
#ifndef ROOT_TNamed
# include <TNamed.h>
#endif
#ifndef ROOT_TArrayI
# include <TArrayI.h>
#endif
-#ifndef ALIFMDUSHORTMAP_H
-# include <AliFMDUShortMap.h>
-#endif
-#ifndef ALIFMDBOOLMAP_H
-# include <AliFMDBoolMap.h>
-#endif
-typedef AliFMDUShortMap AliFMDCalibZeroSuppression;
-typedef AliFMDBoolMap AliFMDCalibDeadMap;
-class AliFMDCalibPedestal;
-class AliFMDCalibGain;
-class AliFMDCalibSampleRate;
-class AliFMDAltroMapping;
+#include "AliFMDCalibFwd.h"
+class AliCDBEntry;
+class AliFMDPreprocessor;
+
+//____________________________________________________________________
+//
+// Singleton class to handle various parameters (not geometry) of the
+// FMD
+// Should get ata fromm Conditions DB.
+//
+/** @brief This class is a singleton that handles various parameters
+ of the FMD detectors.
+ This class reads from the Conditions DB to get the various
+ parameters, which code can then request from here. In that way,
+ all code uses the same data, and the interface is consistent.
+
+ Some of the parameter managed are
+ - @c fPedestal, @c fPedestalWidth
+ Mean and width of the pedestal. The pedestal is simulated
+ by a Guassian, but derived classes my override MakePedestal
+ to simulate it differently (or pick it up from a database).
+ - @c fVA1MipRange
+ The dymamic MIP range of the VA1_ALICE pre-amplifier chip
+ - @c fAltroChannelSize
+ The largest number plus one that can be stored in one
+ channel in one time step in the ALTRO ADC chip.
+ - @c fSampleRate
+ How many times the ALTRO ADC chip samples the VA1_ALICE
+ pre-amplifier signal. The VA1_ALICE chip is read-out at
+ 10MHz, while it's possible to drive the ALTRO chip at
+ 25MHz. That means, that the ALTRO chip can have time to
+ sample each VA1_ALICE signal up to 2 times. Although it's
+ not certain this feature will be used in the production,
+ we'd like have the option, and so it should be reflected in
+ the code.
+
+ @ingroup FMD_base
+*/
class AliFMDParameters : public TNamed
{
public:
+ /** Enumeration of things to initialize */
+ enum What {
+ /** Pulser gain */
+ kPulseGain = 0x1, // Pulser gain
+ /** Pedestals and noise */
+ kPedestal = 0x2, // Pedestal and noise
+ /** Dead channel map */
+ kDeadMap = 0x4, // Dead channel map
+ /** Over sampling rate */
+ kSampleRate = 0x8, // Over sampling rate
+ /** Zero suppression parameters */
+ kZeroSuppression = 0x10, // Zero suppression parameters
+ /** ALTRO data map */
+ kAltroMap = 0x20, // Altro channel map
+ /** Strip Range */
+ kStripRange = 0x40 //Strip range,
+ };
+ enum {
+ kAll = (kPulseGain|kPedestal|kDeadMap|kSampleRate|
+ kZeroSuppression|kAltroMap|kStripRange)
+ };
+
+ /**
+ * Singleton access
+ *
+ *
+ * @return singleton
+ */
static AliFMDParameters* Instance();
- void Init();
+ /**
+ * Initialize the manager. This tries to read the parameters from
+ * CDB. If that fails, the class uses the hard-coded parameters.
+ *
+ * @param forceReInit Force (re-)initalize flag
+ * @param what What to initialize
+ */
+ void Init(Bool_t forceReInit=kFALSE, UInt_t what=kAll );
+ /**
+ * Initialize the manager. This tries to read the parameters from
+ * CDB. If that fails, the class uses the hard-coded parameters.
+ *
+ * @param pp Preprocessor
+ * @param forceReInit Force (re-)initalize flag
+ * @param what What to initialize
+ */
+ void Init(AliFMDPreprocessor* pp,
+ Bool_t forceReInit=kFALSE,
+ UInt_t what=kAll);
+ /**
+ * Initialize the manager. This will try to read some calibrations
+ * (sample rate, strip range, gains, pedestals) from local comma
+ * separated value (CSV) files in the directory pointed at by @a
+ * path. If they are not found, then they will be retrieved from
+ * OCDB as appropriately. Other calibrations are always read from
+ * OCDB.
+ *
+ * The CSV files should be named as
+ *
+ * - Pedestals: <tt>peds</tt><i>det_number</i><tt>.csv</tt>
+ * - Gains: <tt>gains</tt><i>det_number</i><tt>.csv</tt>
+ * - Sample Rate: <tt>conditions</tt><i>det_number</i><tt>.csv</tt>
+ * - Strip Range: <tt>conditions</tt><i>det_number</i><tt>.csv</tt>
+ *
+ * where <i>det_number</i> is the detector number (1, 2, or 3).
+ *
+ * @param path Where to look for the CSV files
+ * @param forceReInit Always reinitialise
+ * @param what What calibrations to load.
+ */
+ void Init(const char* path,
+ Bool_t forceReInit=kFALSE,
+ UInt_t what=kAll);
- // Set various `Fixed' parameters
+ /**
+ * Automatically generate a dead map from the pedestals and gains.
+ * A channel is marked as dead of the noise is too high (currently
+ * more than 10 ADC counts), or the gain is unreasonable (currently
+ * larger than 10, or smaller than 0.1).
+ *
+ * The procedure does not overwrite channels previously marked as
+ * dead - e.g., channels marked as dead in the calibration loaded
+ * from OCDB will continue to be marked as dead. That is, this
+ * procedure will never make a channel un-dead.
+ *
+ * @param maxNoise Maximum noise value before a channel is marked
+ * as dead.
+ * @param minGain Minimum value of the calibrated gain before a
+ * channel is considered dead.
+ * @param maxGain Maximum value of the calibrated gain before a
+ * channel is considered dead.
+ */
+ void MakeDeadMap(Float_t maxNoise=10, Float_t minGain=.1, Float_t maxGain=10);
+ /**
+ * Print all parameters.
+ *
+ * If option contains an 'A' then everything is printed.
+ *
+ * If the option contains the string "FMD" the function will search
+ * for detector, ring, sector, and strip numbers to print, in
+ * format
+ *
+ * @verbatim
+ * FMD<detector><ring>[<sector>,<string>]
+ * @endverbatim
+ *
+ * The wild card '*' means all of <detector>, <ring>, <sector>, or
+ * <strip>.
+ *
+ * @param option Option string
+ */
+ void Print(Option_t* option="A") const;
+ /**
+ * Draw parameters.
+ *
+ * @param option What to draw. Should be one of
+ * - dead Dead channels
+ * - threshold Threshold
+ * - gain Gain
+ * - pedestal Pedestal
+ * - noise Noise (or pedestal width)
+ * - zero Zero suppression
+ * - rate Sampling rate (VA1 clock / ALTRO clock)
+ * - min Minimum strip read out
+ * - max Maximum strip read out
+ * - map hardware address
+ */
+ void Draw(Option_t* option="pedestal");
+
+ /** @{ */
+ /** @name Set various `Fixed' parameters */
+ /**
+ * @param r How many MIP signals we can fit in the VA1
+ * pre-amps. (default and design is 20)
+ */
void SetVA1MipRange(UShort_t r=20) { fVA1MipRange = r; }
+ /**
+ * @param s Maximum number of the ADC (ALTRO). This is a 10 bit
+ * ADC so, the maximum number is 1024
+ */
void SetAltroChannelSize(UShort_t s=1024) { fAltroChannelSize = s;}
+ /**
+ * @param size The number of strips multiplexed into one ALTRO
+ * channel. That is, how many strips is connected to one VA1
+ * pre-amp.
+ */
void SetChannelsPerAltro(UShort_t size=128) { fChannelsPerAltro = size; }
+ /**
+ * @param f Factor to use for accepting a signal.
+ */
void SetPedestalFactor(Float_t f=3) { fPedestalFactor = f; }
+ /**
+ * @param n Number of pre-samples to keep during zero-suppression -
+ * only used in simulation.
+ */
+ void SetZSPreSamples(UShort_t n=1) { fZSPre = (n & 0x3); }
+ /**
+ * @param n Number of post-samples to keep during zero-suppression -
+ * only used in simulation.
+ */
+ void SetZSPostSamples(UShort_t n=1) { fZSPost = (n & 0x3); }
+ /**
+ * @param use If true, do pedestal subtraction before zero
+ * suppression - only used in simulation
+ */
+ void SetZSPedSubtract(Bool_t use=kTRUE) { fZSPedSubtract = use; }
+ /** @} */
- // Set various variable parameter defaults
+ /** @{ */
+ /** @name Set various variable parameter defaults */
+ /**
+ * @param s Zero suppression threshold in ADC counts
+ */
void SetZeroSuppression(UShort_t s=0) { fFixedZeroSuppression = s; }
- void SetSampleRate(UShort_t r=1) { fFixedSampleRate = (r>2?2:r);}
+ /**
+ * @param r How many times we oversample each strip.
+ */
+ void SetSampleRate(UShort_t r=1) { fFixedSampleRate = r ;}//(r>2?2:r);}
+ /**
+ * @param r How many times we oversample each strip.
+ */
+ void SetSampleRate(AliFMDCalibSampleRate* r) { fSampleRate = r; }
+ /**
+ * @param p Pedestal value in ADC counts
+ */
void SetPedestal(Float_t p=10) { fFixedPedestal = p; }
+ /**
+ * @param p Pedestal map
+ */
+ void SetPedestal(AliFMDCalibPedestal* p) { fPedestal = p; }
+ /**
+ * @param w Pedestal width in ADC counts
+ */
void SetPedestalWidth(Float_t w=1) { fFixedPedestalWidth = w; }
+ /**
+ * @param t Threshold used for 1 MIP acceptance.
+ */
void SetThreshold(Float_t t=0) { fFixedThreshold = t; }
+ /**
+ * Range of strips read out
+ *
+ * @param min Minimum strip number (0-127).
+ * @param max Maximum strip number (0-127).
+ */
+ void SetStripRange(UShort_t min=0, UShort_t max=127);
+ /**
+ * set the strip range from object
+ *
+ * @param r Strip range object
+ */
+ void SetStripRange(AliFMDCalibStripRange* r) { fStripRange = r; }
+ /**
+ * Whether raw data has full common data header (8 32bit words) or
+ * the older invalid format (7 32bit words with bogus entries)
+ *
+ * @param yes if true the raw data has complete data header
+ */
+ void UseCompleteHeader(Bool_t yes=kTRUE) { fHasCompleteHeader = yes; }
+ /**
+ * @param g Gain map
+ */
+ void SetGain(AliFMDCalibGain* g) { fPulseGain = g; }
+ /** @} */
- // Get `Fixed' various parameters
+ /** @{ */
+ /** @name Get `Fixed' various parameters */
+ /**
+ * @return Number of MIP signals that fit inside a VA1 channel
+ */
UShort_t GetVA1MipRange() const { return fVA1MipRange; }
+ /**
+ * @return The maximum count in the ADC
+ */
UShort_t GetAltroChannelSize() const { return fAltroChannelSize; }
+ /**
+ * @return Number of strips muliplexed into one ADC channel
+ */
UShort_t GetChannelsPerAltro() const { return fChannelsPerAltro; }
+ /**
+ * @return The average energy deposited by one MIP
+ */
Float_t GetEdepMip() const;
+ /**
+ * This is the conversion from Digital-to-Analog-Converter setting
+ * to the number of MIPs. The number was measured in the NBI lab during
+ * August 2008.
+ *
+ * @return The conversion factor from DAC to ADC
+ */
+ Float_t GetDACPerMIP() const;
+ /**
+ * @return The factor used of signal acceptance
+ */
Float_t GetPedestalFactor() const { return fPedestalFactor; }
-
- // Get variable parameters
+ /**
+ * @param n Number of pre-samples to keep during zero-suppression -
+ * only used in simulation.
+ */
+ UShort_t GetZSPreSamples() const { return fZSPre; }
+ /**
+ * @param n Number of post-samples to keep during zero-suppression -
+ * only used in simulation.
+ */
+ UShort_t GetZSPostSamples() const { return fZSPost; }
+ /**
+ * @param use If true, do pedestal subtraction before zero
+ * suppression - only used in simulation
+ */
+ Bool_t IsZSPedSubtract() const { return fZSPedSubtract; }
+ /** @} */
+
+ /** @{ */
+ /** @name Various varible conditions */
+ /**
+ * Whether the strip is considered dead
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return @c true if the strip is considered dead, @c false if it's
+ * OK.
+ */
Bool_t IsDead(UShort_t detector,
Char_t ring,
UShort_t sector,
UShort_t strip) const;
+ /**
+ * Get the threshold in the pulser gain
+ *
+ *
+ * @return Threshold from pulser
+ */
Float_t GetThreshold() const;
+ /**
+ * Gain of pre-amp. for strip, sector, ring, detector
+ *
+ * For simulations this is normally set to
+ *
+ * @f[
+ * \frac{\mbox{VA1_MIP_Range}{\mbox{ALTRO_channel_size}}\mbox{MIP_Energy_Loss}
+ * @f]
+ *
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return Gain of pre-amp.
+ */
Float_t GetPulseGain(UShort_t detector,
Char_t ring,
UShort_t sector,
UShort_t strip) const;
+ /**
+ * Get mean of pedestal
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return Mean of pedestal
+ */
Float_t GetPedestal(UShort_t detector,
Char_t ring,
UShort_t sector,
UShort_t strip) const;
+ /**
+ * Width of pedestal
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return Width of pedestal
+ */
Float_t GetPedestalWidth(UShort_t detector,
Char_t ring,
UShort_t sector,
UShort_t strip) const;
+ /**
+ * zero suppression threshold (in ADC counts)
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return zero suppression threshold (in ADC counts)
+ */
UShort_t GetZeroSuppression(UShort_t detector,
Char_t ring,
UShort_t sector,
UShort_t strip) const;
- UShort_t GetSampleRate(UShort_t ddl) const;
+ /**
+ * Get the sampling rate
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return The sampling rate
+ */
+ UShort_t GetSampleRate(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip) const;
+ /**
+ * Get the minimum strip in the read-out range
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return Minimum strip
+ */
+ UShort_t GetMinStrip(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip) const;
+ /**
+ * Get the maximum strip in the read-out range
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return Maximum strip
+ */
+ UShort_t GetMaxStrip(UShort_t detector,
+ Char_t ring,
+ UShort_t sector,
+ UShort_t strip) const;
+ /**
+ * Get the number of pre-samples in ALTRO channels
+ *
+ * @param detector Detector # (1-3)
+ * @param ring Ring ID ('I' or 'O')
+ * @param sector Sector number (0-39)
+ * @param strip Strip number (0-511)
+ *
+ * @return Maximum strip
+ */
+ UShort_t GetPreSamples(UShort_t,
+ Char_t,
+ UShort_t,
+ UShort_t) const { return 14+5; }
+ /* @}*/
+
+ /**
+ * @{
+ * @name Hardware to detector translation (and inverse)
+ */
+ /**
+ * Map a hardware address into a detector index.
+ *
+ * @param ddl Hardware DDL number
+ * @param board FEC number
+ * @param altro ALTRO number
+ * @param channel Channel number
+ * @param timebin Timebin
+ * @param det On return, the detector #
+ * @param ring On return, the ring ID
+ * @param sec On return, the sector #
+ * @param str On return, the base of strip #
+ * @param sam On return, the sample number for this strip
+ *
+ * @return @c true on success, false otherwise
+ */
+ Bool_t Hardware2Detector(UShort_t ddl, UShort_t board,
+ UShort_t altro, UShort_t chan,
+ UShort_t timebin,
+ UShort_t& det, Char_t& ring,
+ UShort_t& sec, Short_t& str,
+ UShort_t& sam) const;
+ /**
+ * Map a hardware address into a detector index.
+ *
+ * @param ddl Hardware DDL number
+ * @param hwaddr Hardware address.
+ * @param timebin Timebin
+ * @param det On return, the detector #
+ * @param ring On return, the ring ID
+ * @param sec On return, the sector #
+ * @param str On return, the base of strip #
+ * @param sam On return, the sample number for this strip
+ *
+ * @return @c true on success, false otherwise
+ */
+ Bool_t Hardware2Detector(UShort_t ddl, UShort_t hwaddr,
+ UShort_t timebin,
+ UShort_t& det, Char_t& ring,
+ UShort_t& sec, Short_t& str,
+ UShort_t& sam) const;
- Bool_t Hardware2Detector(UInt_t ddl, UInt_t addr, UShort_t& det,
- Char_t& ring, UShort_t& sec, UShort_t& str) const;
- Bool_t Detector2Hardware(UShort_t det, Char_t ring, UShort_t sec,
- UShort_t str, UInt_t& ddl, UInt_t& addr) const;
+ /**
+ * Map a detector index into a hardware address.
+ *
+ * @param det The detector #
+ * @param ring The ring ID
+ * @param sec The sector #
+ * @param str The strip #
+ * @param sam The sample number
+ * @param ddl On return, hardware DDL number
+ * @param board On return, the FEC board address (local to DDL)
+ * @param altro On return, the ALTRO number (local to FEC)
+ * @param channel On return, the channel number (local to ALTRO)
+ * @param timebin On return, the timebin number (local to ALTRO)
+ *
+ * @return @c true on success, false otherwise
+ */
+ Bool_t Detector2Hardware(UShort_t det, Char_t ring,
+ UShort_t sec, UShort_t str,
+ UShort_t sam,
+ UShort_t& ddl, UShort_t& board,
+ UShort_t& altro, UShort_t& channel,
+ UShort_t& timebin) const;
+ /**
+ * Map a detector index into a hardware address.
+ *
+ * @param det The detector #
+ * @param ring The ring ID
+ * @param sec The sector #
+ * @param str The strip #
+ * @param sam The sample number
+ * @param ddl On return, hardware DDL number
+ * @param hwaddr On return, hardware address.
+ * @param timebin On return, the timebin number (local to ALTRO)
+ *
+ * @return @c true on success, false otherwise
+ */
+ Bool_t Detector2Hardware(UShort_t det, Char_t ring,
+ UShort_t sec, UShort_t str,
+ UShort_t sam,
+ UShort_t& ddl, UShort_t& hwaddr,
+ UShort_t& timebin) const;
+ /**
+ * Get the map that translates hardware to detector coordinates
+ *
+ * @return Get the map that translates hardware to detector
+ * coordinates
+ */
AliFMDAltroMapping* GetAltroMap() const;
- enum {
- kBaseDDL = 0x1000 // DDL offset for the FMD
- };
+ /**
+ * Whether raw data has full common data header (8 32bit words) or
+ * the older invalid format (7 32bit words with bogus entries)
+ *
+ * @return false if the raw data has incomplete data header
+ */
+ Bool_t HasCompleteHeader() const { return fHasCompleteHeader; }
+
+ /** @} */
+
+ static const char* PulseGainPath() { return fgkPulseGain; }
+ static const char* PedestalPath() { return fgkPedestal; }
+ static const char* DeadPath() { return fgkDead; }
+ static const char* SampleRatePath() { return fgkSampleRate; }
+ static const char* AltroMapPath() { return fgkAltroMap; }
+ static const char* ZeroSuppressionPath() { return fgkZeroSuppression; }
+ static const char* StripRangePath() { return fgkStripRange; }
+ static const char* GetPedestalShuttleID() {return fkPedestalShuttleID;}
+ static const char* GetGainShuttleID() {return fkGainShuttleID;}
+ static const char* GetConditionsShuttleID() {return fkConditionsShuttleID;}
+
protected:
+ /**
+ * CTOR
+ */
AliFMDParameters();
+ /**
+ * CTOR
+ */
+ AliFMDParameters(const AliFMDParameters& o)
+ : TNamed(o),
+ fIsInit(o.fIsInit),
+ fkSiDeDxMip(o.fkSiDeDxMip),
+ fVA1MipRange(o.fVA1MipRange),
+ fAltroChannelSize(o.fAltroChannelSize),
+ fChannelsPerAltro(o.fChannelsPerAltro),
+ fPedestalFactor(o.fPedestalFactor),
+ fZSPre(o.fZSPre),
+ fZSPost(o.fZSPost),
+ fZSPedSubtract(o.fZSPedSubtract),
+ fFixedPedestal(o.fFixedPedestal),
+ fFixedPedestalWidth(o.fFixedPedestalWidth),
+ fFixedZeroSuppression(o.fFixedZeroSuppression),
+ fFixedSampleRate(o.fFixedSampleRate),
+ fFixedThreshold(o.fFixedThreshold),
+ fFixedMinStrip(o.fFixedMinStrip),
+ fFixedMaxStrip(o.fFixedMaxStrip),
+ fFixedPulseGain(o.fFixedPulseGain),
+ fEdepMip(o.fEdepMip),
+ fHasCompleteHeader(o.fHasCompleteHeader),
+ fZeroSuppression(o.fZeroSuppression),
+ fSampleRate(o.fSampleRate),
+ fPedestal(o.fPedestal),
+ fPulseGain(o.fPulseGain),
+ fDeadMap(o.fDeadMap),
+ fAltroMap(o.fAltroMap),
+ fStripRange(o.fStripRange)
+ {}
+ /**
+ * Assignement operator
+ *
+ * @return Reference to this
+ */
+ AliFMDParameters& operator=(const AliFMDParameters&) { return *this; }
+ /**
+ * DTOR
+ */
virtual ~AliFMDParameters() {}
+ /**
+ * Singleton instance
+ */
static AliFMDParameters* fgInstance; // Static singleton instance
- static const char* fgkPulseGain; // Path to PulseGain calib object
- static const char* fgkPedestal; // Path to Pedestal calib object
- static const char* fgkDead; // Path to Dead calib object
- static const char* fgkSampleRate; // Path to SampleRate calib object
- static const char* fgkAltroMap; // Path to AltroMap calib object
- static const char* fgkZeroSuppression; // Path to ZeroSuppression cal object
+ /**
+ * Check if the file <i>prefix</i><i>number</i> exists in @a path,
+ * and write the full path to @a f.
+ *
+ * @param prefix File prefix (cond, peds, gains, ...)
+ * @param path Path to files
+ * @param number Detector number (1, 2, or 3)
+ * @param f On return full path to file (if found)
+ *
+ * @return @c true if file exists and is readable, @c false otherwise
+ */
+ Bool_t CheckFile(const char* prefix, const char* path,
+ int number, TString& f) const;
+ /**
+ * Get an entry from either global AliCDBManager or passed
+ * AliFMDPreprocessor.
+ *
+ * @param path Path to CDB object.
+ * @param pp AliFMDPreprocessor
+ * @param fatal If true, raise a fatal flag if we didn't get the entry.
+ * @return AliCDBEntry if found
+ */
+ AliCDBEntry* GetEntry(const char* path, AliFMDPreprocessor* pp,
+ Bool_t fatal=kTRUE) const;
+ /**
+ * Initialize gains. Try to get them from CDB
+ *
+ * @param pp Pre-processor if called from shuttle
+ */
+ void InitPulseGain(AliFMDPreprocessor* pp=0);
+ /**
+ * Initialize pedestals. Try to get them from CDB
+ *
+ * @param pp Pre-processor if called from shuttle
+ */
+ void InitPedestal(AliFMDPreprocessor* pp=0);
+ /**
+ * Initialize dead map. Try to get it from CDB
+ *
+ * @param pp Pre-processor if called from shuttle
+ */
+ void InitDeadMap(AliFMDPreprocessor* pp=0);
+ /**
+ * Initialize sample rates. Try to get them from CDB
+ *
+ * @param pp Pre-processor if called from shuttle
+ */
+ void InitSampleRate(AliFMDPreprocessor* pp=0);
+ /**
+ * Initialize zero suppression thresholds. Try to get them from CDB
+ *
+ * @param pp Pre-processor if called from shuttle
+ */
+ void InitZeroSuppression(AliFMDPreprocessor* pp=0);
+ /**
+ * Initialize hardware map. Try to get it from CDB
+ *
+ * @param pp Pre-processor if called from shuttle
+ */
+ void InitAltroMap(AliFMDPreprocessor* pp=0);
+ /**
+ * Initialize strip range. Try to get it from CDB
+ *
+ * @param pp Pre-processor if called from shuttle
+ */
+ void InitStripRange(AliFMDPreprocessor* pp=0);
- Bool_t fIsInit; // Whether we've been initialised
+ Bool_t fIsInit; // Whether we've been initialised
- const Float_t fSiDeDxMip; // MIP dE/dx in Silicon
- UShort_t fVA1MipRange; // # MIPs the pre-amp can do
- UShort_t fAltroChannelSize; // Largest # to store in 1 ADC ch.
- UShort_t fChannelsPerAltro; // Number of pre-amp. chan/adc chan.
- Float_t fPedestalFactor; // Number of pedestal widths
+ static const char* fgkPulseGain; // Path to PulseGain calib object
+ static const char* fgkPedestal; // Path to Pedestal calib object
+ static const char* fgkDead; // Path to Dead calib object
+ static const char* fgkSampleRate; // Path to SampleRate calib object
+ static const char* fgkAltroMap; // Path to AltroMap calib object
+ static const char* fgkZeroSuppression; // Path to ZeroSuppression cal object
+ static const char* fgkStripRange; // Path to strip range cal object
+ const Float_t fkSiDeDxMip; // MIP dE/dx in Silicon
+ UShort_t fVA1MipRange; // # MIPs the pre-amp can do
+ UShort_t fAltroChannelSize; // Largest # to store in 1 ADC ch.
+ UShort_t fChannelsPerAltro; // Number of pre-amp. chan/adc chan.
+ Float_t fPedestalFactor; // Number of pedestal widths
+ UShort_t fZSPre; // Number of pre-samples in ZS
+ UShort_t fZSPost; // Number of post-samples in ZS
+ Bool_t fZSPedSubtract; // Pedestal subtraction before ZS
- Float_t fFixedPedestal; // Pedestal to subtract
- Float_t fFixedPedestalWidth; // Width of pedestal
- UShort_t fFixedZeroSuppression; // Threshold for zero-suppression
- UShort_t fFixedSampleRate; // Times the ALTRO samples pre-amp.
- Float_t fFixedThreshold; //
- mutable Float_t fFixedPulseGain; //! Gain (cached)
- mutable Float_t fEdepMip; //! Cache of energy loss for a MIP
+ Float_t fFixedPedestal; // Pedestal to subtract
+ Float_t fFixedPedestalWidth; // Width of pedestal
+ UShort_t fFixedZeroSuppression; // Threshold for zero-suppression
+ UShort_t fFixedSampleRate; // Times the ALTRO samples pre-amp.
+ Float_t fFixedThreshold; // Threshold in ADC counts
+ UShort_t fFixedMinStrip; // Minimum strip read-out
+ UShort_t fFixedMaxStrip; // Maximum strip read-out
+ mutable Float_t fFixedPulseGain; //! Gain (cached)
+ mutable Float_t fEdepMip; //! Cache of energy loss for a MIP
+ Bool_t fHasCompleteHeader; // raw data has incomplete data header
+
+ static const char* fkPedestalShuttleID; // Shuttle/preprocessor ID for pedestals
+ static const char* fkGainShuttleID; // Shuttle/preprocessor ID for gains
+ static const char* fkConditionsShuttleID; // Shuttle/preprocessor ID for conditions
AliFMDCalibZeroSuppression* fZeroSuppression; // Zero suppression from CDB
AliFMDCalibSampleRate* fSampleRate; // Sample rate from CDB
AliFMDCalibGain* fPulseGain; // Pulser gain
AliFMDCalibDeadMap* fDeadMap; // Pulser gain
AliFMDAltroMapping* fAltroMap; // Map of hardware
+ AliFMDCalibStripRange* fStripRange; // Strip range
- ClassDef(AliFMDParameters,3)
+ ClassDef(AliFMDParameters,6) // Manager of parameters
};
+//__________________________________________________________________
+inline void
+AliFMDParameters::SetStripRange(UShort_t min, UShort_t max)
+{
+ // Set fixed strip range
+ fFixedMinStrip = min;
+ fFixedMaxStrip = max;
+}
+
#endif
//____________________________________________________________________
//
git://git.uio.no / u / mrichter / AliRoot.git / blobdiff